diff options
Diffstat (limited to 'usrp2/top/B100/B100.v')
-rw-r--r-- | usrp2/top/B100/B100.v | 78 |
1 files changed, 59 insertions, 19 deletions
diff --git a/usrp2/top/B100/B100.v b/usrp2/top/B100/B100.v index dcda974b4..cb4efa4fa 100644 --- a/usrp2/top/B100/B100.v +++ b/usrp2/top/B100/B100.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -50,6 +50,8 @@ module B100 // ///////////////////////////////////////////////////////////////////////// // Clocking wire clk_fpga, clk_fpga_in, reset; + wire gpif_clk = IFCLK; + wire gpif_rst; IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE")) clk_fpga_pin (.O(clk_fpga_in),.I(CLK_FPGA_P),.IB(CLK_FPGA_N)); @@ -57,6 +59,7 @@ module B100 BUFG clk_fpga_BUFG (.I(clk_fpga_in), .O(clk_fpga)); reset_sync reset_sync(.clk(clk_fpga), .reset_in((~reset_n) | (~ext_reset)), .reset_out(reset)); + reset_sync reset_sync_gpif(.clk(gpif_clk), .reset_in((~reset_n) | (~ext_reset)), .reset_out(gpif_rst)); // ///////////////////////////////////////////////////////////////////////// // SPI @@ -105,6 +108,7 @@ module B100 // ///////////////////////////////////////////////////////////////////////// // RX ADC -- handles deinterleaving + wire rxsync_0, rxsync_1; reg [11:0] rx_i, rx_q; wire [11:0] rx_a, rx_b; @@ -151,24 +155,60 @@ module B100 rx_i <= rx_a; rx_q <= rx_b; end - + // ///////////////////////////////////////////////////////////////////////// - // Main U1E Core - u1plus_core u1p_c(.clk_fpga(clk_fpga), .rst_fpga(reset), - .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk), - .debug_txd(), .debug_rxd(1'b1), - - .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_pktend(GPIF_PKTEND), - .gpif_sloe(GPIF_SLOE), .gpif_slwr(GPIF_SLWR), .gpif_slrd(GPIF_SLRD), - .gpif_fifoadr(GPIF_ADR), .gpif_clk(IFCLK), - - .db_sda(SDA_FPGA), .db_scl(SCL_FPGA), - .sclk(sclk), .sen({SEN_CODEC,SEN_TX_DB,SEN_RX_DB}), .mosi(mosi), .miso(miso), - .cgen_st_status(cgen_st_status), .cgen_st_ld(cgen_st_ld),.cgen_st_refmon(cgen_st_refmon), - .cgen_sync_b(cgen_sync_b), .cgen_ref_sel(cgen_ref_sel), - .io_tx(io_tx), .io_rx(io_rx), - .tx_i(tx_i), .tx_q(tx_q), - .rx_i(rx_i), .rx_q(rx_q), - .pps_in(PPS_IN) ); + // Main Core + wire [35:0] rx_data, tx_data, ctrl_data, resp_data; + wire rx_src_rdy, rx_dst_rdy, tx_src_rdy, tx_dst_rdy, resp_src_rdy, resp_dst_rdy, ctrl_src_rdy, ctrl_dst_rdy; + wire dsp_rx_run, dsp_tx_run; + wire [7:0] sen8; + assign {SEN_CODEC,SEN_TX_DB,SEN_RX_DB} = sen8[2:0]; + wire [31:0] core_debug; + + assign debug_led = {dsp_tx_run, dsp_rx_run, cgen_st_ld}; + wire cgen_sync; + assign { cgen_sync_b, cgen_ref_sel } = {~cgen_sync, 1'b1}; + + u1plus_core #( + .NUM_RX_DSPS(1), + .DSP_RX_XTRA_FIFOSIZE(11), + .DSP_TX_XTRA_FIFOSIZE(12), + .USE_PACKET_PADDER(1) + ) core( + .clk(clk_fpga), .reset(reset), + .debug(core_debug), .debug_clk(debug_clk), + + .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy), + .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy), + .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy), + .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy), + + .dsp_rx_run(dsp_rx_run), .dsp_tx_run(dsp_tx_run), + .clock_sync(cgen_sync), + + .db_sda(SDA_FPGA), .db_scl(SCL_FPGA), + .sclk(sclk), .sen(sen8), .mosi(mosi), .miso(miso), + .io_tx(io_tx), .io_rx(io_rx), + .tx_i(tx_i), .tx_q(tx_q), + .rx_i(rx_i), .rx_q(rx_q), + .pps_in(PPS_IN) ); + + // ///////////////////////////////////////////////////////////////////////// + // Interface from host to/from GPIF + wire [31:0] gpif_debug; + slave_fifo slave_fifo (.gpif_clk(gpif_clk), .gpif_rst(gpif_rst), .gpif_d(GPIF_D), + .gpif_ctl(GPIF_CTL), .sloe(GPIF_SLOE), .slwr(GPIF_SLWR), .slrd(GPIF_SLRD), + .pktend(GPIF_PKTEND), .fifoadr(GPIF_ADR), + + .fifo_clk(clk_fpga), .fifo_rst(reset), + .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy), + .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy), + .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy), + .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy), + + .debug(gpif_debug)); + + //assign debug = gpif_debug; + assign debug = core_debug; endmodule // B100 |