diff options
Diffstat (limited to 'usrp2/sdr_lib/duc_chain.v')
| -rw-r--r-- | usrp2/sdr_lib/duc_chain.v | 26 |
1 files changed, 16 insertions, 10 deletions
diff --git a/usrp2/sdr_lib/duc_chain.v b/usrp2/sdr_lib/duc_chain.v index 0d3ca258f..66d15d0ad 100644 --- a/usrp2/sdr_lib/duc_chain.v +++ b/usrp2/sdr_lib/duc_chain.v @@ -18,15 +18,16 @@ //! The USRP digital up-conversion chain module duc_chain - #(parameter BASE = 0) + #(parameter BASE = 0, parameter DSPNO = 0) (input clk, input rst, input set_stb, input [7:0] set_addr, input [31:0] set_data, + input set_stb_user, input [7:0] set_addr_user, input [31:0] set_data_user, - // From TX frontend + // To TX frontend output [23:0] tx_fe_i, output [23:0] tx_fe_q, - // To TX control + // From TX control input [31:0] sample, input run, output strobe, @@ -85,8 +86,8 @@ module duc_chain wire signed [17:0] da, db; wire signed [35:0] prod_i, prod_q; - wire [17:0] bb_i = {sample[31:16],2'b0}; - wire [17:0] bb_q = {sample[15:0],2'b0}; + wire [15:0] bb_i; + wire [15:0] bb_q; wire [17:0] i_interp, q_interp; wire [17:0] hb1_i, hb1_q, hb2_i, hb2_q; @@ -96,9 +97,9 @@ module duc_chain // but the default case inside hb_interp handles this hb_interp #(.IWIDTH(18),.OWIDTH(18),.ACCWIDTH(24)) hb_interp_i - (.clk(clk),.rst(rst),.bypass(~enable_hb1),.cpo(cpo),.stb_in(strobe_hb1),.data_in(bb_i),.stb_out(strobe_hb2),.data_out(hb1_i)); + (.clk(clk),.rst(rst),.bypass(~enable_hb1),.cpo(cpo),.stb_in(strobe_hb1),.data_in({bb_i, 2'b0}),.stb_out(strobe_hb2),.data_out(hb1_i)); hb_interp #(.IWIDTH(18),.OWIDTH(18),.ACCWIDTH(24)) hb_interp_q - (.clk(clk),.rst(rst),.bypass(~enable_hb1),.cpo(cpo),.stb_in(strobe_hb1),.data_in(bb_q),.stb_out(strobe_hb2),.data_out(hb1_q)); + (.clk(clk),.rst(rst),.bypass(~enable_hb1),.cpo(cpo),.stb_in(strobe_hb1),.data_in({bb_q, 2'b0}),.stb_out(strobe_hb2),.data_out(hb1_q)); small_hb_int #(.WIDTH(18)) small_hb_interp_i (.clk(clk),.rst(rst),.bypass(~enable_hb2),.stb_in(strobe_hb2),.data_in(hb1_i), @@ -148,9 +149,14 @@ module duc_chain .R(rst) // Synchronous reset input ); - assign tx_fe_i = prod_i[28:5]; - assign tx_fe_q = prod_q[28:5]; - + custom_dsp_tx #(.DSPNO(DSPNO)) custom( + .clock(clk), .reset(rst), .enable(run), + .set_stb(set_stb_user), .set_addr(set_addr_user), .set_data(set_data_user), + .frontend_i(tx_fe_i), .frontend_q(tx_fe_q), + .duc_out_i(prod_i[28:5]), .duc_out_q(prod_q[28:5]), + .duc_in_sample({bb_i, bb_q}), .duc_in_strobe(strobe_hb1), + .bb_sample(sample), .bb_strobe(strobe)); + assign debug = {strobe_cic, strobe_hb1, strobe_hb2,run}; endmodule // dsp_core |