diff options
Diffstat (limited to 'usrp2/gpmc/gpmc.v')
| -rw-r--r-- | usrp2/gpmc/gpmc.v | 159 |
1 files changed, 159 insertions, 0 deletions
diff --git a/usrp2/gpmc/gpmc.v b/usrp2/gpmc/gpmc.v new file mode 100644 index 000000000..a5d4db466 --- /dev/null +++ b/usrp2/gpmc/gpmc.v @@ -0,0 +1,159 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +////////////////////////////////////////////////////////////////////////////////// + +module gpmc + #(parameter TXFIFOSIZE = 11, + parameter RXFIFOSIZE = 11, + parameter ADDR_WIDTH = 10, + parameter BUSDEBUG = 1) + (// GPMC signals + input arst, + input EM_CLK, inout [15:0] EM_D, input [ADDR_WIDTH:1] EM_A, input [1:0] EM_NBE, + input EM_WAIT0, input EM_NCS4, input EM_NCS6, input EM_NWE, input EM_NOE, + + // GPIOs for FIFO signalling + output rx_have_data, output tx_have_space, + + // Wishbone signals + input wb_clk, input wb_rst, + output [ADDR_WIDTH:0] wb_adr_o, output [15:0] wb_dat_mosi, input [15:0] wb_dat_miso, + output [1:0] wb_sel_o, output wb_cyc_o, output wb_stb_o, output wb_we_o, input wb_ack_i, + + // FIFO interface + input fifo_clk, input fifo_rst, input clear_tx, input clear_rx, + output [35:0] tx_data_o, output tx_src_rdy_o, input tx_dst_rdy_i, + input [35:0] rx_data_i, input rx_src_rdy_i, output rx_dst_rdy_o, + + output tx_underrun, output rx_overrun, + input [7:0] test_rate, input [3:0] test_ctrl, + output [31:0] debug + ); + + wire EM_output_enable = (~EM_NOE & (~EM_NCS4 | ~EM_NCS6)); + wire [15:0] EM_D_fifo; + wire [15:0] EM_D_wb; + + assign EM_D = ~EM_output_enable ? 16'bz : ~EM_NCS4 ? EM_D_fifo : EM_D_wb; + + // CS4 is RAM_2PORT for DATA PATH (high-speed data) + // Writes go into one RAM, reads come from the other + // CS6 is for CONTROL PATH (wishbone) + + // //////////////////////////////////////////// + // TX Data Path + + wire [17:0] tx18_data; + wire tx18_src_rdy, tx18_dst_rdy; + wire [35:0] tx_data, txb_data; + wire tx_src_rdy, tx_dst_rdy; + wire txb_src_rdy, txb_dst_rdy; + + gpmc_to_fifo #(.ADDR_WIDTH(ADDR_WIDTH)) gpmc_to_fifo + (.EM_D(EM_D), .EM_A(EM_A), .EM_CLK(EM_CLK), .EM_WE(~EM_NCS4 & ~EM_NWE), + .clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), .arst(fifo_rst | clear_tx | arst), + .data_o(tx18_data), .src_rdy_o(tx18_src_rdy), .dst_rdy_i(tx18_dst_rdy), + .have_space(tx_have_space)); + + fifo19_to_fifo36 #(.LE(1)) f19_to_f36 // Little endian because ARM is LE + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .f19_datain({1'b0,tx18_data}), .f19_src_rdy_i(tx18_src_rdy), .f19_dst_rdy_o(tx18_dst_rdy), + .f36_dataout(txb_data), .f36_src_rdy_o(txb_src_rdy), .f36_dst_rdy_i(txb_dst_rdy)); + + fifo_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_buffering( + .clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .datain(txb_data), .src_rdy_i(txb_src_rdy), .dst_rdy_o(txb_dst_rdy), + .dataout(tx_data), .src_rdy_o(tx_src_rdy), .dst_rdy_i(tx_dst_rdy) + ); + + // //////////////////////////////////////////// + // RX Data Path + + wire [17:0] rx18_data; + wire rx18_src_rdy, rx18_dst_rdy; + wire [35:0] rx_data, rxb_data; + wire rx_src_rdy, rx_dst_rdy; + wire rxb_src_rdy, rxb_dst_rdy; + wire dummy; + + fifo_cascade #(.WIDTH(36), .SIZE(RXFIFOSIZE)) rx_buffering( + .clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .datain(rx_data), .src_rdy_i(rx_src_rdy), .dst_rdy_o(rx_dst_rdy), + .dataout(rxb_data), .src_rdy_o(rxb_src_rdy), .dst_rdy_i(rxb_dst_rdy) + ); + + fifo36_to_fifo19 #(.LE(1)) f36_to_f19 // Little endian because ARM is LE + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .f36_datain(rxb_data), .f36_src_rdy_i(rxb_src_rdy), .f36_dst_rdy_o(rxb_dst_rdy), + .f19_dataout({dummy,rx18_data}), .f19_src_rdy_o(rx18_src_rdy), .f19_dst_rdy_i(rx18_dst_rdy) ); + + fifo_to_gpmc #(.ADDR_WIDTH(ADDR_WIDTH)) fifo_to_gpmc + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), .arst(fifo_rst | clear_rx | arst), + .data_i(rx18_data), .src_rdy_i(rx18_src_rdy), .dst_rdy_o(rx18_dst_rdy), + .EM_D(EM_D_fifo), .EM_A(EM_A), .EM_CLK(EM_CLK), .EM_OE(~EM_NCS4 & ~EM_NOE), + .data_available(rx_have_data)); + + // //////////////////////////////////////////// + // Control path on CS6 + + gpmc_wb gpmc_wb + (.EM_CLK(EM_CLK), .EM_D_in(EM_D), .EM_D_out(EM_D_wb), .EM_A(EM_A), .EM_NBE(EM_NBE), + .EM_WE(~EM_NCS6 & ~EM_NWE), .EM_OE(~EM_NCS6 & ~EM_NOE), + .wb_clk(wb_clk), .wb_rst(wb_rst), + .wb_adr_o(wb_adr_o), .wb_dat_mosi(wb_dat_mosi), .wb_dat_miso(wb_dat_miso), + .wb_sel_o(wb_sel_o), .wb_cyc_o(wb_cyc_o), .wb_stb_o(wb_stb_o), .wb_we_o(wb_we_o), + .wb_ack_i(wb_ack_i) ); + + // //////////////////////////////////////////// + // Test support, traffic generator, loopback, etc. + + // RX side muxes test data into the same stream + wire [35:0] loopbackrx_data, testrx_data; + wire [35:0] loopbacktx_data, testtx_data; + wire loopbackrx_src_rdy, loopbackrx_dst_rdy; + wire loopbacktx_src_rdy, loopbacktx_dst_rdy; + wire sel_testtx = test_ctrl[0]; + + fifo36_mux rx_test_mux_lvl_2 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .data0_i(loopbackrx_data), .src0_rdy_i(loopbackrx_src_rdy), .dst0_rdy_o(loopbackrx_dst_rdy), + .data1_i(rx_data_i), .src1_rdy_i(rx_src_rdy_i), .dst1_rdy_o(rx_dst_rdy_o), + .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); + + fifo_short #(.WIDTH(36)) loopback_fifo + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx | clear_rx), + .datain(loopbacktx_data), .src_rdy_i(loopbacktx_src_rdy), .dst_rdy_o(loopbacktx_dst_rdy), + .dataout(loopbackrx_data), .src_rdy_o(loopbackrx_src_rdy), .dst_rdy_i(loopbackrx_dst_rdy)); + + // Crossbar used as a demux for switching TX stream to main DSP or to test logic + crossbar36 tx_crossbar_lvl_1 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .cross(sel_testtx), + .data0_i(tx_data), .src0_rdy_i(tx_src_rdy), .dst0_rdy_o(tx_dst_rdy), + .data1_i(tx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input + .data0_o(tx_data_o), .src0_rdy_o(tx_src_rdy_o), .dst0_rdy_i(tx_dst_rdy_i), + .data1_o(loopbacktx_data), .src1_rdy_o(loopbacktx_src_rdy), .dst1_rdy_i(loopbacktx_dst_rdy) ); + + assign debug = { + EM_D, //16 + EM_A, //10 + EM_CLK, EM_NCS4, EM_NWE, EM_NOE, //4 + EM_NCS6, wb_ack_i + }; + +endmodule // gpmc |