diff options
Diffstat (limited to 'usrp2/gpmc/gpmc.v')
| -rw-r--r-- | usrp2/gpmc/gpmc.v | 156 |
1 files changed, 82 insertions, 74 deletions
diff --git a/usrp2/gpmc/gpmc.v b/usrp2/gpmc/gpmc.v index a5d4db466..2ba69d184 100644 --- a/usrp2/gpmc/gpmc.v +++ b/usrp2/gpmc/gpmc.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -18,7 +18,7 @@ ////////////////////////////////////////////////////////////////////////////////// module gpmc - #(parameter TXFIFOSIZE = 11, + #(parameter TXFIFOSIZE = 11, parameter RXFIFOSIZE = 11, parameter ADDR_WIDTH = 10, parameter BUSDEBUG = 1) @@ -26,57 +26,51 @@ module gpmc input arst, input EM_CLK, inout [15:0] EM_D, input [ADDR_WIDTH:1] EM_A, input [1:0] EM_NBE, input EM_WAIT0, input EM_NCS4, input EM_NCS6, input EM_NWE, input EM_NOE, - + // GPIOs for FIFO signalling - output rx_have_data, output tx_have_space, - - // Wishbone signals - input wb_clk, input wb_rst, - output [ADDR_WIDTH:0] wb_adr_o, output [15:0] wb_dat_mosi, input [15:0] wb_dat_miso, - output [1:0] wb_sel_o, output wb_cyc_o, output wb_stb_o, output wb_we_o, input wb_ack_i, - + output rx_have_data, output tx_have_space, output resp_have_data, + // FIFO interface - input fifo_clk, input fifo_rst, input clear_tx, input clear_rx, - output [35:0] tx_data_o, output tx_src_rdy_o, input tx_dst_rdy_i, - input [35:0] rx_data_i, input rx_src_rdy_i, output rx_dst_rdy_o, + input fifo_clk, input fifo_rst, + output [35:0] tx_data, output tx_src_rdy, input tx_dst_rdy, + input [35:0] rx_data, input rx_src_rdy, output rx_dst_rdy, + output [35:0] ctrl_data, output ctrl_src_rdy, input ctrl_dst_rdy, + input [35:0] resp_data, input resp_src_rdy, output resp_dst_rdy, - output tx_underrun, output rx_overrun, - input [7:0] test_rate, input [3:0] test_ctrl, output [31:0] debug ); - wire EM_output_enable = (~EM_NOE & (~EM_NCS4 | ~EM_NCS6)); - wire [15:0] EM_D_fifo; - wire [15:0] EM_D_wb; + wire EM_output_enable = (~EM_NOE & (~EM_NCS4 | ~EM_NCS6)); + wire [15:0] EM_D_data; + wire [15:0] EM_D_ctrl; - assign EM_D = ~EM_output_enable ? 16'bz : ~EM_NCS4 ? EM_D_fifo : EM_D_wb; + assign EM_D = ~EM_output_enable ? 16'bz : ~EM_NCS4 ? EM_D_data : EM_D_ctrl; // CS4 is RAM_2PORT for DATA PATH (high-speed data) // Writes go into one RAM, reads come from the other - // CS6 is for CONTROL PATH (wishbone) + // CS6 is for CONTROL PATH (slow) // //////////////////////////////////////////// // TX Data Path wire [17:0] tx18_data; wire tx18_src_rdy, tx18_dst_rdy; - wire [35:0] tx_data, txb_data; - wire tx_src_rdy, tx_dst_rdy; + wire [35:0] txb_data; wire txb_src_rdy, txb_dst_rdy; gpmc_to_fifo #(.ADDR_WIDTH(ADDR_WIDTH)) gpmc_to_fifo (.EM_D(EM_D), .EM_A(EM_A), .EM_CLK(EM_CLK), .EM_WE(~EM_NCS4 & ~EM_NWE), - .clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), .arst(fifo_rst | clear_tx | arst), + .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .arst(fifo_rst | arst), .data_o(tx18_data), .src_rdy_o(tx18_src_rdy), .dst_rdy_i(tx18_dst_rdy), .have_space(tx_have_space)); fifo19_to_fifo36 #(.LE(1)) f19_to_f36 // Little endian because ARM is LE - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .f19_datain({1'b0,tx18_data}), .f19_src_rdy_i(tx18_src_rdy), .f19_dst_rdy_o(tx18_dst_rdy), .f36_dataout(txb_data), .f36_src_rdy_o(txb_src_rdy), .f36_dst_rdy_i(txb_dst_rdy)); fifo_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_buffering( - .clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .datain(txb_data), .src_rdy_i(txb_src_rdy), .dst_rdy_o(txb_dst_rdy), .dataout(tx_data), .src_rdy_o(tx_src_rdy), .dst_rdy_i(tx_dst_rdy) ); @@ -86,74 +80,88 @@ module gpmc wire [17:0] rx18_data; wire rx18_src_rdy, rx18_dst_rdy; - wire [35:0] rx_data, rxb_data; - wire rx_src_rdy, rx_dst_rdy; + wire [35:0] rxb_data; wire rxb_src_rdy, rxb_dst_rdy; wire dummy; fifo_cascade #(.WIDTH(36), .SIZE(RXFIFOSIZE)) rx_buffering( - .clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .datain(rx_data), .src_rdy_i(rx_src_rdy), .dst_rdy_o(rx_dst_rdy), .dataout(rxb_data), .src_rdy_o(rxb_src_rdy), .dst_rdy_i(rxb_dst_rdy) ); fifo36_to_fifo19 #(.LE(1)) f36_to_f19 // Little endian because ARM is LE - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .f36_datain(rxb_data), .f36_src_rdy_i(rxb_src_rdy), .f36_dst_rdy_o(rxb_dst_rdy), .f19_dataout({dummy,rx18_data}), .f19_src_rdy_o(rx18_src_rdy), .f19_dst_rdy_i(rx18_dst_rdy) ); - fifo_to_gpmc #(.ADDR_WIDTH(ADDR_WIDTH)) fifo_to_gpmc - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), .arst(fifo_rst | clear_rx | arst), + fifo_to_gpmc #(.ADDR_WIDTH(ADDR_WIDTH), .LAST_ADDR(10'h3ff)) fifo_to_gpmc + (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .arst(fifo_rst | arst), .data_i(rx18_data), .src_rdy_i(rx18_src_rdy), .dst_rdy_o(rx18_dst_rdy), - .EM_D(EM_D_fifo), .EM_A(EM_A), .EM_CLK(EM_CLK), .EM_OE(~EM_NCS4 & ~EM_NOE), + .EM_D(EM_D_data), .EM_A(EM_A), .EM_CLK(EM_CLK), .EM_OE(~EM_NCS4 & ~EM_NOE), .data_available(rx_have_data)); // //////////////////////////////////////////// // Control path on CS6 - - gpmc_wb gpmc_wb - (.EM_CLK(EM_CLK), .EM_D_in(EM_D), .EM_D_out(EM_D_wb), .EM_A(EM_A), .EM_NBE(EM_NBE), - .EM_WE(~EM_NCS6 & ~EM_NWE), .EM_OE(~EM_NCS6 & ~EM_NOE), - .wb_clk(wb_clk), .wb_rst(wb_rst), - .wb_adr_o(wb_adr_o), .wb_dat_mosi(wb_dat_mosi), .wb_dat_miso(wb_dat_miso), - .wb_sel_o(wb_sel_o), .wb_cyc_o(wb_cyc_o), .wb_stb_o(wb_stb_o), .wb_we_o(wb_we_o), - .wb_ack_i(wb_ack_i) ); + + // //////////////////////////////////////////////////////////////////// + // CTRL TX Data Path + + wire [17:0] ctrl18_data; + wire ctrl18_src_rdy, ctrl18_dst_rdy; + wire [35:0] ctrlb_data; + wire ctrlb_src_rdy, ctrlb_dst_rdy; + + gpmc_to_fifo #(.PTR_WIDTH(5), .ADDR_WIDTH(5)) ctrl_gpmc_to_fifo + (.EM_D(EM_D), .EM_A(EM_A[5:1]), .EM_CLK(EM_CLK), .EM_WE(~EM_NCS6 & ~EM_NWE & (EM_A[ADDR_WIDTH:6] == 0)), + .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .arst(fifo_rst | arst), + .data_o(ctrl18_data), .src_rdy_o(ctrl18_src_rdy), .dst_rdy_i(ctrl18_dst_rdy), + .have_space(/*always*/)); + + fifo19_to_fifo36 #(.LE(1)) ctrl_f19_to_f36 // Little endian because ARM is LE + (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), + .f19_datain({1'b0,ctrl18_data}), .f19_src_rdy_i(ctrl18_src_rdy), .f19_dst_rdy_o(ctrl18_dst_rdy), + .f36_dataout(ctrlb_data), .f36_src_rdy_o(ctrlb_src_rdy), .f36_dst_rdy_i(ctrlb_dst_rdy)); + + fifo_cascade #(.WIDTH(36), .SIZE(9)) ctrl_buffering( + .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), + .datain(ctrlb_data), .src_rdy_i(ctrlb_src_rdy), .dst_rdy_o(ctrlb_dst_rdy), + .dataout(ctrl_data), .src_rdy_o(ctrl_src_rdy), .dst_rdy_i(ctrl_dst_rdy) + ); // //////////////////////////////////////////// - // Test support, traffic generator, loopback, etc. - - // RX side muxes test data into the same stream - wire [35:0] loopbackrx_data, testrx_data; - wire [35:0] loopbacktx_data, testtx_data; - wire loopbackrx_src_rdy, loopbackrx_dst_rdy; - wire loopbacktx_src_rdy, loopbacktx_dst_rdy; - wire sel_testtx = test_ctrl[0]; - - fifo36_mux rx_test_mux_lvl_2 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .data0_i(loopbackrx_data), .src0_rdy_i(loopbackrx_src_rdy), .dst0_rdy_o(loopbackrx_dst_rdy), - .data1_i(rx_data_i), .src1_rdy_i(rx_src_rdy_i), .dst1_rdy_o(rx_dst_rdy_o), - .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); - - fifo_short #(.WIDTH(36)) loopback_fifo - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx | clear_rx), - .datain(loopbacktx_data), .src_rdy_i(loopbacktx_src_rdy), .dst_rdy_o(loopbacktx_dst_rdy), - .dataout(loopbackrx_data), .src_rdy_o(loopbackrx_src_rdy), .dst_rdy_i(loopbackrx_dst_rdy)); - - // Crossbar used as a demux for switching TX stream to main DSP or to test logic - crossbar36 tx_crossbar_lvl_1 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .cross(sel_testtx), - .data0_i(tx_data), .src0_rdy_i(tx_src_rdy), .dst0_rdy_o(tx_dst_rdy), - .data1_i(tx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input - .data0_o(tx_data_o), .src0_rdy_o(tx_src_rdy_o), .dst0_rdy_i(tx_dst_rdy_i), - .data1_o(loopbacktx_data), .src1_rdy_o(loopbacktx_src_rdy), .dst1_rdy_i(loopbacktx_dst_rdy) ); - - assign debug = { - EM_D, //16 + // CTRL RX Data Path + + wire [17:0] resp18_data; + wire resp18_src_rdy, resp18_dst_rdy; + wire [35:0] respb_data; + wire respb_src_rdy, respb_dst_rdy; + wire resp_dummy; + + fifo_cascade #(.WIDTH(36), .SIZE(9)) resp_buffering( + .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), + .datain(resp_data), .src_rdy_i(resp_src_rdy), .dst_rdy_o(resp_dst_rdy), + .dataout(respb_data), .src_rdy_o(respb_src_rdy), .dst_rdy_i(respb_dst_rdy) + ); + + fifo36_to_fifo19 #(.LE(1)) resp_f36_to_f19 // Little endian because ARM is LE + (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), + .f36_datain(respb_data), .f36_src_rdy_i(respb_src_rdy), .f36_dst_rdy_o(respb_dst_rdy), + .f19_dataout({resp_dummy,resp18_data}), .f19_src_rdy_o(resp18_src_rdy), .f19_dst_rdy_i(resp18_dst_rdy) ); + + fifo_to_gpmc #(.ADDR_WIDTH(ADDR_WIDTH), .LAST_ADDR(10'h00f)) resp_fifo_to_gpmc + (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .arst(fifo_rst | arst), + .data_i(resp18_data), .src_rdy_i(resp18_src_rdy), .dst_rdy_o(resp18_dst_rdy), + .EM_D(EM_D_ctrl), .EM_A(EM_A), .EM_CLK(EM_CLK), .EM_OE(~EM_NCS6 & ~EM_NOE), + .data_available(resp_have_data)); + + assign debug = { + EM_D, + //resp18_data[15:0], //16 EM_A, //10 - EM_CLK, EM_NCS4, EM_NWE, EM_NOE, //4 - EM_NCS6, wb_ack_i - }; + //resp18_data[17:16], resp18_src_rdy, resp18_dst_rdy, //4 + EM_NCS4, EM_NCS6, EM_NWE, EM_NOE, //4 + EM_CLK, resp_have_data //2 + }; endmodule // gpmc |