diff options
Diffstat (limited to 'usrp2/gpif')
| -rw-r--r-- | usrp2/gpif/Makefile.srcs | 2 | ||||
| -rw-r--r-- | usrp2/gpif/fifo36_to_gpmc16.v | 54 | ||||
| -rw-r--r-- | usrp2/gpif/gpmc16_to_fifo36.v | 64 | ||||
| -rw-r--r-- | usrp2/gpif/slave_fifo.v | 613 |
4 files changed, 319 insertions, 414 deletions
diff --git a/usrp2/gpif/Makefile.srcs b/usrp2/gpif/Makefile.srcs index 524e3660d..7909fb5ff 100644 --- a/usrp2/gpif/Makefile.srcs +++ b/usrp2/gpif/Makefile.srcs @@ -8,4 +8,6 @@ GPIF_SRCS = $(abspath $(addprefix $(BASE_DIR)/../gpif/, \ packet_reframer.v \ slave_fifo.v \ +fifo36_to_gpmc16.v \ +gpmc16_to_fifo36.v \ )) diff --git a/usrp2/gpif/fifo36_to_gpmc16.v b/usrp2/gpif/fifo36_to_gpmc16.v new file mode 100644 index 000000000..508cd319c --- /dev/null +++ b/usrp2/gpif/fifo36_to_gpmc16.v @@ -0,0 +1,54 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +module fifo36_to_gpmc16 +#( + parameter FIFO_SIZE = 9 +) +( + //input fifo interface + input fifo_clk, input fifo_rst, + input [35:0] in_data, + input in_src_rdy, + output in_dst_rdy, + + //output interface + input gpif_clk, input gpif_rst, + output [15:0] out_data, + output valid, + input enable, + output eof +); + + wire [35:0] data_int; + wire src_rdy_int, dst_rdy_int; + + fifo_2clock_cascade #(.WIDTH(36), .SIZE(FIFO_SIZE)) fifo_2clk + (.wclk(fifo_clk), .datain(in_data), .src_rdy_i(in_src_rdy), .dst_rdy_o(in_dst_rdy), .space(), + .rclk(gpif_clk), .dataout(data_int), .src_rdy_o(src_rdy_int), .dst_rdy_i(dst_rdy_int), .occupied(), + .arst(fifo_rst | gpif_rst)); + + wire [18:0] data18_int; + fifo36_to_fifo19 #(.LE(1)) f36_to_f19 + (.clk(gpif_clk), .reset(gpif_rst), .clear(1'b0), + .f36_datain(data_int), .f36_src_rdy_i(src_rdy_int), .f36_dst_rdy_o(dst_rdy_int), + .f19_dataout(data18_int), .f19_src_rdy_o(valid), .f19_dst_rdy_i(enable) ); + + assign out_data = data18_int[15:0]; + assign eof = data18_int[17]; + +endmodule //fifo_to_gpmc16 diff --git a/usrp2/gpif/gpmc16_to_fifo36.v b/usrp2/gpif/gpmc16_to_fifo36.v new file mode 100644 index 000000000..933891715 --- /dev/null +++ b/usrp2/gpif/gpmc16_to_fifo36.v @@ -0,0 +1,64 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +module gpmc16_to_fifo36 +#( + parameter FIFO_SIZE = 9, + + //not ready until minimum xfers of space available + parameter MIN_SPACE16 = 128 +) +( + //input interface + input gpif_clk, input gpif_rst, + input [15:0] in_data, + input valid, + output reg ready, + + //output fifo interface + input fifo_clk, input fifo_rst, + output [35:0] out_data, + output out_src_rdy, + input out_dst_rdy +); + + wire [35:0] data_int; + wire src_rdy_int, dst_rdy_int; + wire [18:0] refr_data; + wire refr_src_rdy, refr_dst_rdy; + + wire [15:0] fifo_space; + + always @(posedge gpif_clk) + ready <= (fifo_space >= MIN_SPACE16/2); + + packet_reframer packet_reframer + (.clk(gpif_clk), .reset(gpif_rst), .clear(1'b0), + .data_i(in_data), .src_rdy_i(valid), .dst_rdy_o(), + .data_o(refr_data), .src_rdy_o(refr_src_rdy), .dst_rdy_i(refr_dst_rdy)); + + fifo19_to_fifo36 #(.LE(1)) f19_to_f36 + (.clk(gpif_clk), .reset(gpif_rst), .clear(1'b0), + .f19_datain(refr_data), .f19_src_rdy_i(refr_src_rdy), .f19_dst_rdy_o(refr_dst_rdy), + .f36_dataout(data_int), .f36_src_rdy_o(src_rdy_int), .f36_dst_rdy_i(dst_rdy_int)); + + fifo_2clock_cascade #(.WIDTH(36), .SIZE(FIFO_SIZE)) fifo_2clk + (.wclk(gpif_clk), .datain(data_int), .src_rdy_i(src_rdy_int), .dst_rdy_o(dst_rdy_int), .space(fifo_space), + .rclk(fifo_clk), .dataout(out_data), .src_rdy_o(out_src_rdy), .dst_rdy_i(out_dst_rdy), .occupied(), + .arst(fifo_rst | gpif_rst)); + +endmodule //fifo_to_gpmc16 diff --git a/usrp2/gpif/slave_fifo.v b/usrp2/gpif/slave_fifo.v index d1a0a027b..0f301f8a6 100644 --- a/usrp2/gpif/slave_fifo.v +++ b/usrp2/gpif/slave_fifo.v @@ -20,85 +20,70 @@ //this is a FIFO master interface for the FX2 in "slave fifo" mode. module slave_fifo - #(parameter TXFIFOSIZE = 12, parameter RXFIFOSIZE = 12) + #( + //how many cycles max in a transfer state + parameter DATA_XFER_COUNT = 256, + parameter CTRL_XFER_COUNT = 32, + + //sizes for fifo36 2 clock cascade fifos + parameter DATA_RX_FIFO_SIZE = 9, + parameter DATA_TX_FIFO_SIZE = 9, + parameter CTRL_RX_FIFO_SIZE = 9, + parameter CTRL_TX_FIFO_SIZE = 9 + ) (// GPIF signals input gpif_clk, input gpif_rst, inout [15:0] gpif_d, input [3:0] gpif_ctl, - output sloe, output slrd, output slwr, output pktend, output [1:0] fifoadr, - - // Wishbone signals - input wb_clk, input wb_rst, - output [15:0] wb_adr_o, output [15:0] wb_dat_mosi, input [15:0] wb_dat_miso, - output [1:0] wb_sel_o, output wb_cyc_o, output wb_stb_o, output wb_we_o, input wb_ack_i, - input [7:0] triggers, - - input dsp_rx_run, - + output reg sloe, output reg slrd, output reg slwr, output reg pktend, output reg [1:0] fifoadr, + // FIFO interface - input fifo_clk, input fifo_rst, input clear_tx, input clear_rx, - output [35:0] tx_data_o, output tx_src_rdy_o, input tx_dst_rdy_i, - input [35:0] rx_data_i, input rx_src_rdy_i, output rx_dst_rdy_o, - input [35:0] tx_err_data_i, input tx_err_src_rdy_i, output tx_err_dst_rdy_o, - output tx_underrun, output rx_overrun, - - input [15:0] test_len, input [7:0] test_rate, input [3:0] test_ctrl, - output [31:0] debug0, output [31:0] debug1 + input fifo_clk, input fifo_rst, + output [35:0] tx_data, output tx_src_rdy, input tx_dst_rdy, + input [35:0] rx_data, input rx_src_rdy, output rx_dst_rdy, + output [35:0] ctrl_data, output ctrl_src_rdy, input ctrl_dst_rdy, + input [35:0] resp_data, input resp_src_rdy, output resp_dst_rdy, + + output [31:0] debug ); - reg FX2_DE, FX2_CE, FX2_DF, FX2_CF; + wire FX2_DE_pre = ~gpif_ctl[0]; //EP2 FX2 FIFO empty (FLAGA) + wire FX2_CE_pre = ~gpif_ctl[1]; //EP4 FX2 FIFO empty (FLAGB) + wire FX2_DF_pre = ~gpif_ctl[2]; //EP6 FX2 FIFO full (FLAGC) + wire FX2_CF_pre = ~gpif_ctl[3]; //EP8 FX2 FIFO full (FLAGD) - // inputs to FPGA (all active low) + reg FX2_DE, FX2_CE, FX2_DF, FX2_CF; always @(posedge gpif_clk) begin - FX2_DE <= ~gpif_ctl[0]; //EP2 FX2 FIFO empty (FLAGA) - FX2_CE <= ~gpif_ctl[1]; //EP4 FX2 FIFO empty (FLAGB) - FX2_DF <= ~gpif_ctl[2]; //EP6 FX2 FIFO full (FLAGC) - FX2_CF <= ~gpif_ctl[3]; //EP8 FX2 FIFO full (FLAGD) + FX2_DE <= FX2_DE_pre; //EP2 FX2 FIFO empty (FLAGA) + FX2_CE <= FX2_CE_pre; //EP4 FX2 FIFO empty (FLAGB) + FX2_DF <= FX2_DF_pre; //EP6 FX2 FIFO full (FLAGC) + FX2_CF <= FX2_CF_pre; //EP8 FX2 FIFO full (FLAGD) end - wire [17:0] gpif_d_out_ctrl, gpif_d_out_data, gpif_d_out; + wire [15:0] gpif_d_out_ctrl, gpif_d_out_data; + reg [15:0] gpif_d_out, gpif_d_in; // //////////////////////////////////////////////////////////////////// // GPIF bus master state machine - //transfer size for GPIF data. this can be anything really, it's specified only for - //fairness in bus sharing. 256 lines is 512 bytes over the wire, half the size of - //the double buffers in B100/B150. this should probably be a toplevel parameter or even - //a settings register value. - localparam data_transfer_size = 256; - localparam ctrl_transfer_size = 16; //probably unnecessary since ctrl xfers won't back up - - // state machine i/o to four fifos - //tx - wire ctrl_tx_dst_rdy; //sm input, ctrl tx path has space - wire ctrl_tx_src_rdy; //sm output, ctrl tx path enable - wire data_tx_dst_rdy; //sm input, data tx path has space - wire data_tx_src_rdy; //sm output, data tx path enable - - //rx - wire ctrl_rx_dst_rdy; //sm output, ctrl rx path enable - wire ctrl_rx_src_rdy; //sm input, ctrl rx path has space - wire data_rx_dst_rdy; //sm output, data rx path enable - wire data_rx_src_rdy; //sm input, data rx path has space - - reg tx_data_enough_space; + wire rx_valid, resp_valid; + reg tx_valid, ctrl_valid; + wire tx_ready, ctrl_ready; + reg rx_enable, resp_enable; reg [9:0] transfer_count; //number of lines (a line is 16 bits) in active transfer - reg pktend_latch; - reg [3:0] state; //state machine current state localparam STATE_IDLE = 0; - localparam STATE_DATA_RX = 5; + localparam STATE_THINK = 1; + localparam STATE_DATA_RX = 2; localparam STATE_DATA_TX = 3; - localparam STATE_CTRL_RX = 6; - localparam STATE_CTRL_TX = 9; - localparam STATE_DATA_TX_SLOE = 2; - localparam STATE_CTRL_TX_SLOE = 8; - localparam STATE_DATA_RX_ADR = 1; - localparam STATE_CTRL_RX_ADR = 4; - localparam STATE_PKTEND_ADR = 10; - localparam STATE_PKTEND = 7; + localparam STATE_CTRL_RX = 4; + localparam STATE_CTRL_TX = 5; + localparam STATE_DATA_TX_SLOE = 6; + localparam STATE_CTRL_TX_SLOE = 7; + localparam STATE_DATA_RX_ADR = 8; + localparam STATE_CTRL_RX_ADR = 9; //logs the last bus user for xfer fairness //we only care about data rx vs. tx since ctrl pkts are so short @@ -106,384 +91,184 @@ module slave_fifo localparam BUS_HOG_RX = 0; localparam BUS_HOG_TX = 1; - //count the number of cycles since RX data so we can force a flush - reg [17:0] non_rx_cycles; - localparam rx_idle_flush_cycles = 65536; //about 1ms at 64MHz clock - always @(posedge gpif_clk) begin - if(gpif_rst || state == STATE_DATA_RX || state == STATE_PKTEND) - non_rx_cycles <= 0; - else if (non_rx_cycles != rx_idle_flush_cycles) - non_rx_cycles <= non_rx_cycles + 1; - end - - //when should we flush aka pktend? - //pktend_latch tells us that its ok to flush -> we just had an RX xfer with EOF - //the RX DSP not running or a cycle counter gives us the flushing response dynamic - wire rx_data_flush = (~dsp_rx_run || non_rx_cycles == rx_idle_flush_cycles) && pktend_latch; + wire resp_eof; + reg [1:0] idle_count; // ////////////////////////////////////////////////////////////// // FX2 slave FIFO bus master state machine // - always @(posedge gpif_clk) - if(gpif_rst) begin - state <= STATE_IDLE; - pktend_latch <= 0; - end - else - begin - case (state) - STATE_IDLE: - begin - transfer_count <= 0; - //handle transitions to other states - if(ctrl_tx_dst_rdy & ~FX2_CE) //if there's room in the ctrl fifo and the FX2 has ctrl data - state <= STATE_CTRL_TX_SLOE; - else if(ctrl_rx_src_rdy & ~FX2_CF) //if the ctrl fifo has data and the FX2 isn't full - state <= STATE_CTRL_RX_ADR; - else if(data_tx_dst_rdy & ~FX2_DE & last_data_bus_hog == BUS_HOG_RX & tx_data_enough_space) //if there's room in the data fifo and the FX2 has data - state <= STATE_DATA_TX_SLOE; - else if(data_rx_src_rdy & ~FX2_DF & last_data_bus_hog == BUS_HOG_TX) //if the data fifo has data and the FX2 isn't full - state <= STATE_DATA_RX_ADR; - else if(data_tx_dst_rdy & ~FX2_DE & tx_data_enough_space) - state <= STATE_DATA_TX_SLOE; - else if(data_rx_src_rdy & ~FX2_DF) - state <= STATE_DATA_RX_ADR; - else if(rx_data_flush & ~FX2_DF) - state <= STATE_PKTEND_ADR; - end - - STATE_DATA_TX_SLOE: //just to assert SLOE one cycle before SLRD - state <= STATE_DATA_TX; - STATE_CTRL_TX_SLOE: - state <= STATE_CTRL_TX; - - STATE_DATA_RX_ADR: //just to assert FIFOADR one cycle before SLWR - state <= STATE_DATA_RX; - STATE_CTRL_RX_ADR: - state <= STATE_CTRL_RX; - - STATE_DATA_RX: - begin - if(data_rx_src_rdy && data_rx_dst_rdy) begin - transfer_count <= transfer_count + 1; - pktend_latch <= gpif_d_out_data[17]; //ok to do pkt end when we complete with EOF - end - else - state <= STATE_IDLE; - last_data_bus_hog <= BUS_HOG_RX; - end - - STATE_PKTEND_ADR: - begin - state <= STATE_PKTEND; - end - - STATE_PKTEND: - begin - state <= STATE_IDLE; - pktend_latch <= 0; - end - - STATE_DATA_TX: - begin - if(data_tx_dst_rdy && data_tx_src_rdy) - transfer_count <= transfer_count + 1; - else - state <= STATE_IDLE; - last_data_bus_hog <= BUS_HOG_TX; - end - STATE_CTRL_RX: - begin - if(ctrl_rx_src_rdy && ctrl_rx_dst_rdy) - transfer_count <= transfer_count + 1; - else - state <= STATE_IDLE; - end - STATE_CTRL_TX: - begin - if(ctrl_tx_dst_rdy && ctrl_tx_src_rdy) - transfer_count <= transfer_count + 1; - else - state <= STATE_IDLE; - end - endcase + always @(posedge gpif_clk) + if(gpif_rst) begin + state <= STATE_IDLE; + sloe <= 1; + slrd <= 1; + slwr <= 1; + pktend <= 1; + rx_enable <= 0; + tx_valid <= 0; + ctrl_valid <= 0; + resp_enable <= 0; + idle_count <= 0; + end + else case (state) + STATE_IDLE: begin + transfer_count <= 0; + sloe <= 1; + slrd <= 1; + slwr <= 1; + pktend <= 1; + rx_enable <= 0; + tx_valid <= 0; + ctrl_valid <= 0; + resp_enable <= 0; + if (idle_count == 2'b11) state <= STATE_THINK; + idle_count <= idle_count + 1; + end + + STATE_THINK: begin + + idle_count <= 0; + + //handle transitions to other states + if(ctrl_ready & ~FX2_CE) begin //if there's room in the ctrl fifo and the FX2 has ctrl data + state <= STATE_CTRL_TX_SLOE; + fifoadr <= 2'b01; + sloe <= 0; end + else if(resp_valid & ~FX2_CF) begin //if the ctrl fifo has data and the FX2 isn't full + state <= STATE_CTRL_RX_ADR; + fifoadr <= 2'b11; + end + else if(tx_ready & ~FX2_DE & last_data_bus_hog == BUS_HOG_RX) begin //if there's room in the data fifo and the FX2 has data + state <= STATE_DATA_TX_SLOE; + last_data_bus_hog <= BUS_HOG_TX; + fifoadr <= 2'b00; + sloe <= 0; + end + else if(rx_valid & ~FX2_DF & last_data_bus_hog == BUS_HOG_TX) begin //if the data fifo has data and the FX2 isn't full + state <= STATE_DATA_RX_ADR; + last_data_bus_hog <= BUS_HOG_RX; + fifoadr <= 2'b10; + end + else if(tx_ready & ~FX2_DE) begin + state <= STATE_DATA_TX_SLOE; + last_data_bus_hog <= BUS_HOG_TX; + fifoadr <= 2'b00; + sloe <= 0; + end + else if(rx_valid & ~FX2_DF) begin + state <= STATE_DATA_RX_ADR; + last_data_bus_hog <= BUS_HOG_RX; + fifoadr <= 2'b10; + end + end + + STATE_DATA_TX_SLOE: begin //just to assert SLOE one cycle before SLRD + state <= STATE_DATA_TX; + slrd <= 0; + end - // /////////////////////////////////////////////////////////////////// - // fifo signal assignments and enables + STATE_CTRL_TX_SLOE: begin + state <= STATE_CTRL_TX; + slrd <= 0; + end - //enable fifos - assign data_rx_dst_rdy = (state == STATE_DATA_RX) && ~FX2_DF && (transfer_count != data_transfer_size); - assign data_tx_src_rdy = (state == STATE_DATA_TX) && ~FX2_DE && (transfer_count != data_transfer_size); - assign ctrl_rx_dst_rdy = (state == STATE_CTRL_RX) && ~FX2_CF; - assign ctrl_tx_src_rdy = (state == STATE_CTRL_TX) && ~FX2_CE; + STATE_DATA_RX_ADR: begin //just to assert FIFOADR one cycle before SLWR + state <= STATE_DATA_RX; + rx_enable <= 1; + end - //framing for TX ctrl packets - wire sop_ctrl, eop_ctrl; - assign sop_ctrl = (transfer_count == 0); - assign eop_ctrl = (transfer_count == (ctrl_transfer_size-1)); + STATE_CTRL_RX_ADR: begin + state <= STATE_CTRL_RX; + resp_enable <= 1; + end + + STATE_DATA_RX: begin + if (FX2_DF_pre || ~rx_valid || transfer_count == DATA_XFER_COUNT-1) begin + state <= STATE_IDLE; + rx_enable <= 0; + end + gpif_d_out <= gpif_d_out_data; + slwr <= ~rx_valid; + transfer_count <= transfer_count + 1; + end + + STATE_DATA_TX: begin + if (FX2_DE_pre || transfer_count == DATA_XFER_COUNT-1) begin + state <= STATE_IDLE; + slrd <= 1; + end + gpif_d_in <= gpif_d; + tx_valid <= 1; + transfer_count <= transfer_count + 1; + end + + STATE_CTRL_RX: begin + if (FX2_CF_pre || ~resp_valid || resp_eof || transfer_count == CTRL_XFER_COUNT-1) begin + state <= STATE_IDLE; + resp_enable <= 0; + end + pktend <= ~resp_eof; + gpif_d_out <= gpif_d_out_ctrl; + slwr <= ~resp_valid; + transfer_count <= transfer_count + 1; + end + + STATE_CTRL_TX: begin + if (FX2_CE_pre || transfer_count == CTRL_XFER_COUNT-1) begin + state <= STATE_IDLE; + slrd <= 1; + end + gpif_d_in <= gpif_d; + ctrl_valid <= 1; + transfer_count <= transfer_count + 1; + end + endcase - // //////////////////////////////////////////////////////////////////// - // set GPIF pins - - //set fifoadr to the appropriate endpoint - // {0,0}: EP2, data TX from host - // {0,1}: EP4, ctrl TX from host - // {1,0}: EP6, data RX to host - // {1,1}: EP8, ctrl RX to host - assign fifoadr = {(state == STATE_DATA_RX) | (state == STATE_CTRL_RX) | (state == STATE_DATA_RX_ADR) | (state == STATE_CTRL_RX_ADR) | (state == STATE_PKTEND) | (state == STATE_PKTEND_ADR), - (state == STATE_CTRL_RX) | (state == STATE_CTRL_RX_ADR) | (state == STATE_CTRL_TX) | (state == STATE_CTRL_TX_SLOE)}; - //set sloe, slwr, slrd (all active low) - //SLOE gets asserted when we want data from the FX2; i.e., TX mode - assign sloe = ~{(state == STATE_DATA_TX) | (state == STATE_CTRL_TX) | (state == STATE_DATA_TX_SLOE) | (state == STATE_CTRL_TX_SLOE)}; - //"read" and "write" here are from the master's point of view; - //so "read" means "transmit" and "write" means "receive" - assign slwr = ~{(data_rx_src_rdy && data_rx_dst_rdy) || (ctrl_rx_src_rdy && ctrl_rx_dst_rdy)}; - assign slrd = ~{(data_tx_src_rdy && data_tx_dst_rdy) || (ctrl_tx_src_rdy && ctrl_tx_dst_rdy)}; - - wire pktend_ctrl, pktend_data; - assign pktend_ctrl = ((~ctrl_rx_src_rdy | gpif_d_out_ctrl[17]) & (state == STATE_CTRL_RX)); - assign pktend_data = (state == STATE_PKTEND); - assign pktend = ~(pktend_ctrl | pktend_data); - - //mux between ctrl/data RX data out based on endpoint selection - assign gpif_d_out = fifoadr[0] ? gpif_d_out_ctrl : gpif_d_out_data; // GPIF output data lines, tristate - assign gpif_d = sloe ? gpif_d_out : 16'bz; + assign gpif_d = (sloe)? gpif_d_out[15:0] : 16'bz; // //////////////////////////////////////////////////////////////////// // TX Data Path - wire [15:0] txfifo_data; - wire txfifo_src_rdy, txfifo_dst_rdy; - wire [35:0] tx36_data; - wire tx36_src_rdy, tx36_dst_rdy; - wire [15:0] data_tx_2clk; - wire tx_src_rdy_2clk, tx_dst_rdy_2clk; - - wire [15:0] wr_fifo_space; - - always @(posedge gpif_clk) - tx_data_enough_space <= (wr_fifo_space >= data_transfer_size); - - fifo_cascade #(.WIDTH(16), .SIZE(12)) wr_fifo - (.clk(gpif_clk), .reset(gpif_rst), .clear(clear_tx), - .datain(gpif_d), .src_rdy_i(data_tx_src_rdy), .dst_rdy_o(data_tx_dst_rdy), .space(wr_fifo_space), - .dataout(txfifo_data), .src_rdy_o(txfifo_src_rdy), .dst_rdy_i(txfifo_dst_rdy), .occupied()); - - fifo_2clock_cascade #(.WIDTH(16), .SIZE(4)) wr_fifo_2clk - (.wclk(gpif_clk), .datain(txfifo_data), .src_rdy_i(txfifo_src_rdy), .dst_rdy_o(txfifo_dst_rdy), .space(), - .rclk(fifo_clk), .dataout(data_tx_2clk), .src_rdy_o(tx_src_rdy_2clk), .dst_rdy_i(tx_dst_rdy_2clk), .occupied(), - .arst(fifo_rst)); - - // join vita packets which are longer than one frame, add SOP/EOP/OCC - wire [18:0] refr_data; - wire refr_src_rdy, refr_dst_rdy; - //below 3 signals for debug only - wire refr_state; - wire refr_eof; - wire [15:0] refr_len; - - packet_reframer tx_packet_reframer - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .data_i(data_tx_2clk), .src_rdy_i(tx_src_rdy_2clk), .dst_rdy_o(tx_dst_rdy_2clk), - .data_o(refr_data), .src_rdy_o(refr_src_rdy), .dst_rdy_i(refr_dst_rdy), - .state(refr_state), .eof_out(refr_eof), .length(refr_len)); - - fifo19_to_fifo36 #(.LE(1)) f19_to_f36 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .f19_datain(refr_data), .f19_src_rdy_i(refr_src_rdy), .f19_dst_rdy_o(refr_dst_rdy), - .f36_dataout(tx36_data), .f36_src_rdy_o(tx36_src_rdy), .f36_dst_rdy_i(tx36_dst_rdy)); - - fifo_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_fifo36 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .datain(tx36_data), .src_rdy_i(tx36_src_rdy), .dst_rdy_o(tx36_dst_rdy), - .dataout(tx_data_o), .src_rdy_o(tx_src_rdy_o), .dst_rdy_i(tx_dst_rdy_i)); + gpmc16_to_fifo36 #(.FIFO_SIZE(DATA_TX_FIFO_SIZE), .MIN_SPACE16(DATA_XFER_COUNT)) fifo36_to_gpmc16_tx( + .gpif_clk(gpif_clk), .gpif_rst(gpif_rst), + .in_data(gpif_d_in), .ready(tx_ready), .valid(tx_valid), + .fifo_clk(fifo_clk), .fifo_rst(fifo_rst), + .out_data(tx_data), .out_src_rdy(tx_src_rdy), .out_dst_rdy(tx_dst_rdy) + ); // //////////////////////////////////////////// // RX Data Path - wire [35:0] rx36_data; - wire rx36_src_rdy, rx36_dst_rdy; - wire [18:0] rx19_data; - wire rx19_src_rdy, rx19_dst_rdy; - wire [15:0] rxfifospace; - - //deep 36 bit wide input fifo buffers from DSP - fifo_cascade #(.WIDTH(36), .SIZE(9)) rx_fifo36 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .datain(rx_data_i), .src_rdy_i(rx_src_rdy_i), .dst_rdy_o(rx_dst_rdy_o), - .dataout(rx36_data), .src_rdy_o(rx36_src_rdy), .dst_rdy_i(rx36_dst_rdy)); - - //convert to fifo19 - fifo36_to_fifo19 #(.LE(1)) f36_to_f19 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .f36_datain(rx36_data), .f36_src_rdy_i(rx36_src_rdy), .f36_dst_rdy_o(rx36_dst_rdy), - .f19_dataout(rx19_data), .f19_src_rdy_o(rx19_src_rdy), .f19_dst_rdy_i(rx19_dst_rdy) ); - - wire [18:0] data_rx_int; - wire rx_src_rdy_int, rx_dst_rdy_int; - //clock domain crossing fifo for RX data - fifo_2clock_cascade #(.WIDTH(19), .SIZE(4)) rd_fifo_2clk - (.wclk(fifo_clk), .datain(rx19_data), .src_rdy_i(rx19_src_rdy), .dst_rdy_o(rx19_dst_rdy), .space(), - .rclk(~gpif_clk), .dataout(data_rx_int), .src_rdy_o(rx_src_rdy_int), .dst_rdy_i(rx_dst_rdy_int), .occupied(), - .arst(fifo_rst)); - - //rd_fifo buffers writes to the 2clock fifo above - fifo_cascade #(.WIDTH(18), .SIZE(RXFIFOSIZE)) rd_fifo - (.clk(~gpif_clk), .reset(gpif_rst), .clear(clear_rx), - .datain(data_rx_int[17:0]), .src_rdy_i(rx_src_rdy_int), .dst_rdy_o(rx_dst_rdy_int), .space(rxfifospace), - .dataout(gpif_d_out_data), .src_rdy_o(data_rx_src_rdy), .dst_rdy_i(data_rx_dst_rdy), .occupied()); + fifo36_to_gpmc16 #(.FIFO_SIZE(DATA_RX_FIFO_SIZE)) fifo36_to_gpmc16_rx( + .fifo_clk(fifo_clk), .fifo_rst(fifo_rst), + .in_data(rx_data), .in_src_rdy(rx_src_rdy), .in_dst_rdy(rx_dst_rdy), + .gpif_clk(gpif_clk), .gpif_rst(gpif_rst), + .out_data(gpif_d_out_data), .valid(rx_valid), .enable(rx_enable) + ); // //////////////////////////////////////////////////////////////////// - // FIFO to Wishbone interface + // CTRL TX Data Path - wire [18:0] resp_data, resp_int; - wire resp_src_rdy, resp_dst_rdy; - wire resp_src_rdy_int, resp_dst_rdy_int; - - wire [18:0] tx_err19_data; - wire tx_err19_src_rdy, tx_err19_dst_rdy; - - wire [18:0] ctrl_data; - wire ctrl_src_rdy, ctrl_dst_rdy; - - fifo_to_wb fifo_to_wb - (.clk(fifo_clk), .reset(fifo_rst), .clear(0), - .data_i(ctrl_data), .src_rdy_i(ctrl_src_rdy), .dst_rdy_o(ctrl_dst_rdy), - .data_o(resp_int), .src_rdy_o(resp_src_rdy_int), .dst_rdy_i(resp_dst_rdy_int), - .wb_adr_o(wb_adr_o), .wb_dat_mosi(wb_dat_mosi), .wb_dat_miso(wb_dat_miso), .wb_sel_o(wb_sel_o), - .wb_cyc_o(wb_cyc_o), .wb_stb_o(wb_stb_o), .wb_we_o(wb_we_o), .wb_ack_i(wb_ack_i), - .triggers(triggers), - .debug0(), .debug1()); - - // //////////////////////////////////////////////////////////////////// - // TX CTRL PATH (ctrl commands into Wishbone) + gpmc16_to_fifo36 #(.FIFO_SIZE(CTRL_TX_FIFO_SIZE), .MIN_SPACE16(CTRL_XFER_COUNT)) fifo36_to_gpmc16_ctrl( + .gpif_clk(gpif_clk), .gpif_rst(gpif_rst), + .in_data(gpif_d_in), .ready(ctrl_ready), .valid(ctrl_valid), + .fifo_clk(fifo_clk), .fifo_rst(fifo_rst), + .out_data(ctrl_data), .out_src_rdy(ctrl_src_rdy), .out_dst_rdy(ctrl_dst_rdy) + ); - //how does this use fifo_clk instead of wb_clk - //answer: on b100 fifo clk IS wb clk - fifo_2clock_cascade #(.WIDTH(19), .SIZE(4)) ctrl_fifo_2clk - (.wclk(gpif_clk), .datain({1'b0,eop_ctrl,sop_ctrl,gpif_d}), - .src_rdy_i(ctrl_tx_src_rdy), .dst_rdy_o(ctrl_tx_dst_rdy), .space(), - .rclk(fifo_clk), .dataout(ctrl_data), - .src_rdy_o(ctrl_src_rdy), .dst_rdy_i(ctrl_dst_rdy), .occupied(), - .arst(fifo_rst)); + // //////////////////////////////////////////// + // CTRL RX Data Path + + fifo36_to_gpmc16 #(.FIFO_SIZE(CTRL_RX_FIFO_SIZE)) fifo36_to_gpmc16_resp( + .fifo_clk(fifo_clk), .fifo_rst(fifo_rst), + .in_data(resp_data), .in_src_rdy(resp_src_rdy), .in_dst_rdy(resp_dst_rdy), + .gpif_clk(gpif_clk), .gpif_rst(gpif_rst), + .out_data(gpif_d_out_ctrl), .valid(resp_valid), .enable(resp_enable), + .eof(resp_eof) + ); - // //////////////////////////////////////////////////////////////////// - // RX CTRL PATH (async packets, ctrl response data) - - //tx_err_data_i is the 36wide tx async err data clocked on fifo_clk - fifo36_to_fifo19 #(.LE(1)) f36_to_f19_txerr - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .f36_datain(tx_err_data_i), .f36_src_rdy_i(tx_err_src_rdy_i), .f36_dst_rdy_o(tx_err_dst_rdy_o), - .f19_dataout(tx_err19_data), .f19_src_rdy_o(tx_err19_src_rdy), .f19_dst_rdy_i(tx_err19_dst_rdy) ); - - //mux FIFO-to-WB along with async tx err pkts into one ctrl resp fifo - //how is this clocked on wb_clk? - fifo19_mux #(.prio(0)) mux_err_stream - (.clk(wb_clk), .reset(wb_rst), .clear(clear_rx), - .data0_i(resp_int), .src0_rdy_i(resp_src_rdy_int), .dst0_rdy_o(resp_dst_rdy_int), - .data1_i(tx_err19_data), .src1_rdy_i(tx_err19_src_rdy), .dst1_rdy_o(tx_err19_dst_rdy), - .data_o(resp_data), .src_rdy_o(resp_src_rdy), .dst_rdy_i(resp_dst_rdy)); - - //clock domain crossing cascade fifo for mux_err_stream to get from wb_clk to gpif_clk - //the output of this fifo is CTRL DATA PENDING FOR GPIF - fifo_2clock_cascade #(.WIDTH(18), .SIZE(4)) resp_fifo_2clk - (.wclk(wb_clk), .datain(resp_data[17:0]), .src_rdy_i(resp_src_rdy), .dst_rdy_o(resp_dst_rdy), .space(), - .rclk(~gpif_clk), .dataout(gpif_d_out_ctrl), - .src_rdy_o(ctrl_rx_src_rdy), .dst_rdy_i(ctrl_rx_dst_rdy), .occupied(), - .arst(wb_rst)); - - - // //////////////////////////////////////////////////////////////////// - // Debug support, timed and loopback - // RX side muxes test data into the same stream + assign debug = 0; - /////////////////////////////////////////////////////////////////////// - // debug lines - wire [31:0] debug_rd, debug_wr, debug_split0, debug_split1; - - wire [35:0] timedrx_data, loopbackrx_data, testrx_data; - wire [35:0] timedtx_data, loopbacktx_data, testtx_data; - wire timedrx_src_rdy, timedrx_dst_rdy, loopbackrx_src_rdy, loopbackrx_dst_rdy, - testrx_src_rdy, testrx_dst_rdy; - wire timedtx_src_rdy, timedtx_dst_rdy, loopbacktx_src_rdy, loopbacktx_dst_rdy, - testtx_src_rdy, testtx_dst_rdy; - wire timedrx_src_rdy_int, timedrx_dst_rdy_int, timedtx_src_rdy_int, timedtx_dst_rdy_int; - - wire [31:0] total, crc_err, seq_err, len_err; - wire sel_testtx = test_ctrl[0]; - wire sel_loopbacktx = test_ctrl[1]; - wire pkt_src_enable = test_ctrl[2]; - wire pkt_sink_enable = test_ctrl[3]; -/* - fifo36_mux rx_test_mux_lvl_1 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .data0_i(timedrx_data), .src0_rdy_i(timedrx_src_rdy), .dst0_rdy_o(timedrx_dst_rdy), - .data1_i(loopbackrx_data), .src1_rdy_i(loopbackrx_src_rdy), .dst1_rdy_o(loopbackrx_dst_rdy), - .data_o(testrx_data), .src_rdy_o(testrx_src_rdy), .dst_rdy_i(testrx_dst_rdy)); - - fifo36_mux rx_test_mux_lvl_2 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .data0_i(testrx_data), .src0_rdy_i(testrx_src_rdy), .dst0_rdy_o(testrx_dst_rdy), - .data1_i(rx_data_i), .src1_rdy_i(rx_src_rdy_i), .dst1_rdy_o(rx_dst_rdy_o), - .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); - - fifo_short #(.WIDTH(36)) loopback_fifo - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx | clear_rx), - .datain(loopbacktx_data), .src_rdy_i(loopbacktx_src_rdy), .dst_rdy_o(loopbacktx_dst_rdy), - .dataout(loopbackrx_data), .src_rdy_o(loopbackrx_src_rdy), .dst_rdy_i(loopbackrx_dst_rdy)); - - // Crossbar used as a demux for switching TX stream to main DSP or to test logic - crossbar36 tx_crossbar_lvl_1 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .cross(sel_testtx), - .data0_i(tx_data), .src0_rdy_i(tx_src_rdy), .dst0_rdy_o(tx_dst_rdy), - .data1_i(tx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input - .data0_o(tx_data_o), .src0_rdy_o(tx_src_rdy_o), .dst0_rdy_i(tx_dst_rdy_i), - .data1_o(testtx_data), .src1_rdy_o(testtx_src_rdy), .dst1_rdy_i(testtx_dst_rdy) ); - - crossbar36 tx_crossbar_lvl_2 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .cross(sel_loopbacktx), - .data0_i(testtx_data), .src0_rdy_i(testtx_src_rdy), .dst0_rdy_o(testtx_dst_rdy), - .data1_i(testtx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input - .data0_o(timedtx_data), .src0_rdy_o(timedtx_src_rdy), .dst0_rdy_i(timedtx_dst_rdy), - .data1_o(loopbacktx_data), .src1_rdy_o(loopbacktx_src_rdy), .dst1_rdy_i(loopbacktx_dst_rdy) ); - - // Fixed rate TX traffic consumer - fifo_pacer tx_pacer - (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_sink_enable), - .src1_rdy_i(timedtx_src_rdy), .dst1_rdy_o(timedtx_dst_rdy), - .src2_rdy_o(timedtx_src_rdy_int), .dst2_rdy_i(timedtx_dst_rdy_int), - .underrun(tx_underrun), .overrun()); - - packet_verifier32 pktver32 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .data_i(timedtx_data), .src_rdy_i(timedtx_src_rdy_int), .dst_rdy_o(timedtx_dst_rdy_int), - .total(total), .crc_err(crc_err), .seq_err(seq_err), .len_err(len_err)); - - // Fixed rate RX traffic generator - vita_pkt_gen pktgen - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .len(test_len), - .data_o(timedrx_data), .src_rdy_o(timedrx_src_rdy_int), .dst_rdy_i(timedrx_dst_rdy_int)); - - fifo_pacer rx_pacer - (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_src_enable), - .src1_rdy_i(timedrx_src_rdy_int), .dst1_rdy_o(timedrx_dst_rdy_int), - .src2_rdy_o(timedrx_src_rdy), .dst2_rdy_i(timedrx_dst_rdy), - .underrun(), .overrun(rx_overrun)); -*/ - // //////////////////////////////////////////// - // DEBUG - - assign debug0 = { pktend_latch, data_rx_src_rdy, gpif_ctl[3:0], sloe, slrd, slwr, pktend, fifoadr[1:0], state[3:0], gpif_d[15:0]}; - //assign debug0 = { data_tx_src_rdy, data_tx_dst_rdy, tx_src_rdy_int, tx_dst_rdy_int, - // tx19_src_rdy, tx19_dst_rdy, refr_src_rdy, refr_dst_rdy, - // tx36_src_rdy, tx36_dst_rdy, - // gpif_ctl[3:0], fifoadr[1:0], - // wr_fifo_space[15:0]}; - assign debug1 = { 16'b0, transfer_count[7:0], ctrl_rx_src_rdy, ctrl_tx_dst_rdy, data_rx_src_rdy, - data_tx_dst_rdy, ctrl_tx_src_rdy, ctrl_rx_dst_rdy, data_tx_src_rdy, data_rx_dst_rdy}; endmodule // slave_fifo |