summaryrefslogtreecommitdiffstats
path: root/usrp2/fifo
diff options
context:
space:
mode:
Diffstat (limited to 'usrp2/fifo')
-rw-r--r--usrp2/fifo/buffer_int2.v17
1 files changed, 10 insertions, 7 deletions
diff --git a/usrp2/fifo/buffer_int2.v b/usrp2/fifo/buffer_int2.v
index c73456b74..532980aa2 100644
--- a/usrp2/fifo/buffer_int2.v
+++ b/usrp2/fifo/buffer_int2.v
@@ -31,14 +31,15 @@ module buffer_int2
input rd_ready_i
);
- reg [BUF_SIZE-1:0] rd_addr, wr_addr;
- wire [BUF_SIZE-1:0] rd_addr_next = rd_addr + 1;
+ reg [15:0] rd_addr, wr_addr; // Handle pkt bigger than buffer
+ wire [15:0] rd_addr_next = rd_addr + 1;
+ reg [15:0] rd_length;
+
wire [31:0] ctrl;
wire wr_done, wr_error, wr_idle;
wire rd_done, rd_error, rd_idle;
wire we, en, go;
- reg [BUF_SIZE-1:0] rd_length;
wire read = ctrl[3];
wire rd_clear = ctrl[2];
wire write = ctrl[1];
@@ -73,7 +74,7 @@ module buffer_int2
begin
rd_addr <= 0;
rd_state <= PRE_READ;
- rd_length <= ctrl[15+BUF_SIZE:16];
+ rd_length <= ctrl[31:16];
end
PRE_READ :
@@ -146,17 +147,19 @@ module buffer_int2
assign rd_idle = (rd_state == IDLE);
assign wr_idle = (wr_state == IDLE);
+ wire [BUF_SIZE-1:0] wr_addr_clip = (|wr_addr[15:BUF_SIZE]) ? {BUF_SIZE{1'b1}} : wr_addr[BUF_SIZE-1:0];
+
ram_2port #(.DWIDTH(32),.AWIDTH(BUF_SIZE)) buffer_in // CPU reads here
(.clka(wb_clk_i),.ena(wb_stb_i),.wea(1'b0),
.addra(wb_adr_i[BUF_SIZE+1:2]),.dia(0),.doa(wb_dat_o),
.clkb(clk),.enb(1'b1),.web(we),
- .addrb(wr_addr),.dib(wr_data_i[31:0]),.dob());
+ .addrb(wr_addr_clip),.dib(wr_data_i[31:0]),.dob());
ram_2port #(.DWIDTH(32),.AWIDTH(BUF_SIZE)) buffer_out // CPU writes here
(.clka(wb_clk_i),.ena(wb_stb_i),.wea(wb_we_i),
.addra(wb_adr_i[BUF_SIZE+1:2]),.dia(wb_dat_i),.doa(),
.clkb(clk),.enb(en),.web(1'b0),
- .addrb(rd_addr),.dib(0),.dob(rd_data_o[31:0]));
+ .addrb(rd_addr[BUF_SIZE-1:0]),.dib(0),.dob(rd_data_o[31:0]));
always @(posedge wb_clk_i)
if(wb_rst_i)
@@ -168,7 +171,7 @@ module buffer_int2
sreg(.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),.in(set_data),
.out(ctrl),.changed(go));
- assign status = { {(16-BUF_SIZE){1'b0}},wr_addr,
+ assign status = { wr_addr,
8'b0,1'b0,rd_idle,rd_error,rd_done, 1'b0,wr_idle,wr_error,wr_done};
endmodule // buffer_int2