diff options
Diffstat (limited to 'usrp2/fifo/packet_router.v')
-rw-r--r-- | usrp2/fifo/packet_router.v | 179 |
1 files changed, 100 insertions, 79 deletions
diff --git a/usrp2/fifo/packet_router.v b/usrp2/fifo/packet_router.v index 288ff05e3..031fe1c78 100644 --- a/usrp2/fifo/packet_router.v +++ b/usrp2/fifo/packet_router.v @@ -37,6 +37,9 @@ module packet_router always @(posedge wb_clk_i) wb_ack_o <= wb_stb_i & ~wb_ack_o; + //which buffer: 0 = CPU read buffer, 1 = CPU write buffer + wire which_buf = wb_adr_i[BUF_SIZE+2]; + //////////////////////////////////////////////////////////////////// // CPU interface to this packet router //////////////////////////////////////////////////////////////////// @@ -47,8 +50,15 @@ module packet_router wire cpu_out_valid; wire cpu_out_ready; - //which buffer: 0 = CPU read buffer, 1 = CPU write buffer - wire which_buf = wb_adr_i[BUF_SIZE+2]; + //////////////////////////////////////////////////////////////////// + // Communication interfaces + //////////////////////////////////////////////////////////////////// + wire [35:0] com_inp_data; + wire com_inp_valid; + wire com_inp_ready; + wire [35:0] com_out_data; + wire com_out_valid; + wire com_out_ready; //////////////////////////////////////////////////////////////////// // status and control handshakes @@ -67,20 +77,31 @@ module packet_router assign status[1] = cpu_out_hs_stat; //////////////////////////////////////////////////////////////////// - // Ethernet input control + // Communication input source combiner + // - combine streams from serdes and ethernet + //////////////////////////////////////////////////////////////////// + //TODO: just connect eth input to com input for now + assign com_inp_data = eth_inp_data; + assign com_inp_valid = eth_inp_valid; + assign eth_inp_ready = com_inp_ready; + + //////////////////////////////////////////////////////////////////// + // Communication output sink demuxer + // - demux the stream to serdes or ethernet //////////////////////////////////////////////////////////////////// - //TODO: just connect eth input to cpu input for now - //assign cpu_inp_data = eth_inp_data; - //assign cpu_inp_valid = eth_inp_valid; - //assign eth_inp_ready = cpu_inp_ready; + //TODO: just connect eth output to com output for now + assign eth_out_data = com_out_data; + assign eth_out_valid = com_out_valid; + assign com_out_ready = eth_out_ready; //////////////////////////////////////////////////////////////////// - // Ethernet output control + // Communication output source combiner + // - combine streams from dsp framer, com inspector, and cpu //////////////////////////////////////////////////////////////////// - //TODO: just connect eth output to cpu output for now - assign eth_out_data = cpu_out_data; - assign eth_out_valid = cpu_out_valid; - assign cpu_out_ready = eth_out_ready; + //TODO: just connect com output to cpu output for now + assign com_out_data = cpu_out_data; + assign com_out_valid = cpu_out_valid; + assign cpu_out_ready = com_out_ready; //////////////////////////////////////////////////////////////////// // Interface CPU input interface to memory mapped wishbone @@ -225,131 +246,131 @@ module packet_router end //////////////////////////////////////////////////////////////////// - // Ethernet input inspector - // - inspect Ethernet and send it to CPU or DSP + // Communication input inspector + // - inspect com input and send it to CPU, DSP, or COM //////////////////////////////////////////////////////////////////// - localparam ETH_INSP_READ_ETH_PRE = 0; - localparam ETH_INSP_READ_ETH = 1; - localparam ETH_INSP_WRITE_DSP_REGS = 2; - localparam ETH_INSP_WRITE_DSP_LIVE = 3; - localparam ETH_INSP_WRITE_CPU_REGS = 4; - localparam ETH_INSP_WRITE_CPU_LIVE = 5; + localparam COM_INSP_READ_COM_PRE = 0; + localparam COM_INSP_READ_COM = 1; + localparam COM_INSP_WRITE_DSP_REGS = 2; + localparam COM_INSP_WRITE_DSP_LIVE = 3; + localparam COM_INSP_WRITE_CPU_REGS = 4; + localparam COM_INSP_WRITE_CPU_LIVE = 5; - localparam ETH_INSP_MAX_NUM_DREGS = 12; //padded_eth + ip + udp + vrt_hdr lines - localparam ETH_INSP_DREGS_DSP_OFFSET = 10; //offset to start dsp at + localparam COM_INSP_MAX_NUM_DREGS = 12; //padded_eth + ip + udp + vrt_hdr lines + localparam COM_INSP_DREGS_DSP_OFFSET = 10; //offset to start dsp at - reg [2:0] eth_insp_state; - reg [3:0] eth_insp_dreg_count; //data registers to buffer headers - wire [3:0] eth_insp_dreg_count_next = eth_insp_dreg_count + 1'b1; - reg [35:0] eth_insp_dregs [ETH_INSP_MAX_NUM_DREGS-1:0]; + reg [2:0] com_insp_state; + reg [3:0] com_insp_dreg_count; //data registers to buffer headers + wire [3:0] com_insp_dreg_count_next = com_insp_dreg_count + 1'b1; + reg [35:0] com_insp_dregs [COM_INSP_MAX_NUM_DREGS-1:0]; - wire eth_inp_dregs_is_data = 1'b0; //TODO (not data for now) + wire com_inp_dregs_is_data = 1'b0; //TODO (not data for now) ///////////////////////////////////// //assign output signals to CPU input ///////////////////////////////////// - assign cpu_inp_data = (eth_insp_state == ETH_INSP_WRITE_CPU_REGS)? - eth_insp_dregs[eth_insp_dreg_count] : eth_inp_data + assign cpu_inp_data = (com_insp_state == COM_INSP_WRITE_CPU_REGS)? + com_insp_dregs[com_insp_dreg_count] : com_inp_data ; assign cpu_inp_valid = - (eth_insp_state == ETH_INSP_WRITE_CPU_REGS)? 1'b1 : ( - (eth_insp_state == ETH_INSP_WRITE_CPU_LIVE)? eth_inp_valid : ( + (com_insp_state == COM_INSP_WRITE_CPU_REGS)? 1'b1 : ( + (com_insp_state == COM_INSP_WRITE_CPU_LIVE)? com_inp_valid : ( 1'b0)); ///////////////////////////////////// //assign output signals to DSP output ///////////////////////////////////// - wire [3:0] eth_insp_dsp_flags = (eth_insp_dreg_count == ETH_INSP_DREGS_DSP_OFFSET)? + wire [3:0] com_insp_dsp_flags = (com_insp_dreg_count == COM_INSP_DREGS_DSP_OFFSET)? 4'b0001 : 4'b0000 ; - assign dsp_out_data = (eth_insp_state == ETH_INSP_WRITE_DSP_REGS)? - {eth_insp_dsp_flags, eth_insp_dregs[eth_insp_dreg_count][31:0]} : eth_inp_data + assign dsp_out_data = (com_insp_state == COM_INSP_WRITE_DSP_REGS)? + {com_insp_dsp_flags, com_insp_dregs[com_insp_dreg_count][31:0]} : com_inp_data ; assign dsp_out_valid = - (eth_insp_state == ETH_INSP_WRITE_DSP_REGS)? 1'b1 : ( - (eth_insp_state == ETH_INSP_WRITE_DSP_LIVE)? eth_inp_valid : ( + (com_insp_state == COM_INSP_WRITE_DSP_REGS)? 1'b1 : ( + (com_insp_state == COM_INSP_WRITE_DSP_LIVE)? com_inp_valid : ( 1'b0)); ///////////////////////////////////// - //assign output signal to ETH input + //assign output signal to COM input ///////////////////////////////////// - assign eth_inp_ready = - (eth_insp_state == ETH_INSP_READ_ETH_PRE) ? 1'b1 : ( - (eth_insp_state == ETH_INSP_READ_ETH) ? 1'b1 : ( - (eth_insp_state == ETH_INSP_WRITE_DSP_LIVE)? dsp_out_ready : ( - (eth_insp_state == ETH_INSP_WRITE_CPU_LIVE)? cpu_inp_ready : ( + assign com_inp_ready = + (com_insp_state == COM_INSP_READ_COM_PRE) ? 1'b1 : ( + (com_insp_state == COM_INSP_READ_COM) ? 1'b1 : ( + (com_insp_state == COM_INSP_WRITE_DSP_LIVE)? dsp_out_ready : ( + (com_insp_state == COM_INSP_WRITE_CPU_LIVE)? cpu_inp_ready : ( 1'b0)))); always @(posedge stream_clk) if(stream_rst) begin - eth_insp_state <= ETH_INSP_READ_ETH_PRE; - eth_insp_dreg_count <= 0; + com_insp_state <= COM_INSP_READ_COM_PRE; + com_insp_dreg_count <= 0; end else begin - case(eth_insp_state) - ETH_INSP_READ_ETH_PRE: begin - if (eth_inp_ready & eth_inp_valid & eth_inp_data[32]) begin - eth_insp_state <= ETH_INSP_READ_ETH; - eth_insp_dreg_count <= eth_insp_dreg_count_next; - eth_insp_dregs[eth_insp_dreg_count] <= eth_inp_data; + case(com_insp_state) + COM_INSP_READ_COM_PRE: begin + if (com_inp_ready & com_inp_valid & com_inp_data[32]) begin + com_insp_state <= COM_INSP_READ_COM; + com_insp_dreg_count <= com_insp_dreg_count_next; + com_insp_dregs[com_insp_dreg_count] <= com_inp_data; end end - ETH_INSP_READ_ETH: begin - if (eth_inp_ready & eth_inp_valid) begin - eth_insp_dregs[eth_insp_dreg_count] <= eth_inp_data; - if (eth_inp_dregs_is_data & (eth_insp_dreg_count_next == ETH_INSP_MAX_NUM_DREGS)) begin - eth_insp_state <= ETH_INSP_WRITE_DSP_REGS; - eth_insp_dreg_count <= ETH_INSP_DREGS_DSP_OFFSET; + COM_INSP_READ_COM: begin + if (com_inp_ready & com_inp_valid) begin + com_insp_dregs[com_insp_dreg_count] <= com_inp_data; + if (com_inp_dregs_is_data & (com_insp_dreg_count_next == COM_INSP_MAX_NUM_DREGS)) begin + com_insp_state <= COM_INSP_WRITE_DSP_REGS; + com_insp_dreg_count <= COM_INSP_DREGS_DSP_OFFSET; end - else if (eth_inp_data[33] | (eth_insp_dreg_count_next == ETH_INSP_MAX_NUM_DREGS)) begin - eth_insp_state <= ETH_INSP_WRITE_CPU_REGS; - eth_insp_dreg_count <= 0; + else if (com_inp_data[33] | (com_insp_dreg_count_next == COM_INSP_MAX_NUM_DREGS)) begin + com_insp_state <= COM_INSP_WRITE_CPU_REGS; + com_insp_dreg_count <= 0; end else begin - eth_insp_dreg_count <= eth_insp_dreg_count_next; + com_insp_dreg_count <= com_insp_dreg_count_next; end end end - ETH_INSP_WRITE_DSP_REGS: begin + COM_INSP_WRITE_DSP_REGS: begin if (dsp_out_ready & dsp_out_valid) begin - eth_insp_dreg_count <= eth_insp_dreg_count_next; - if (eth_insp_dreg_count_next == ETH_INSP_MAX_NUM_DREGS) begin - eth_insp_state <= ETH_INSP_WRITE_DSP_LIVE; - eth_insp_dreg_count <= 0; + com_insp_dreg_count <= com_insp_dreg_count_next; + if (com_insp_dreg_count_next == COM_INSP_MAX_NUM_DREGS) begin + com_insp_state <= COM_INSP_WRITE_DSP_LIVE; + com_insp_dreg_count <= 0; end end end - ETH_INSP_WRITE_DSP_LIVE: begin - if (dsp_out_ready & dsp_out_valid & eth_inp_data[33]) begin - eth_insp_state <= ETH_INSP_READ_ETH_PRE; + COM_INSP_WRITE_DSP_LIVE: begin + if (dsp_out_ready & dsp_out_valid & com_inp_data[33]) begin + com_insp_state <= COM_INSP_READ_COM_PRE; end end - ETH_INSP_WRITE_CPU_REGS: begin + COM_INSP_WRITE_CPU_REGS: begin if (cpu_inp_ready & cpu_inp_valid) begin - eth_insp_dreg_count <= eth_insp_dreg_count_next; + com_insp_dreg_count <= com_insp_dreg_count_next; if (cpu_inp_data[33]) begin - eth_insp_state <= ETH_INSP_READ_ETH_PRE; - eth_insp_dreg_count <= 0; + com_insp_state <= COM_INSP_READ_COM_PRE; + com_insp_dreg_count <= 0; end - else if (eth_insp_dreg_count_next == ETH_INSP_MAX_NUM_DREGS) begin - eth_insp_state <= ETH_INSP_WRITE_CPU_LIVE; - eth_insp_dreg_count <= 0; + else if (com_insp_dreg_count_next == COM_INSP_MAX_NUM_DREGS) begin + com_insp_state <= COM_INSP_WRITE_CPU_LIVE; + com_insp_dreg_count <= 0; end end end - ETH_INSP_WRITE_CPU_LIVE: begin - if (cpu_inp_ready & cpu_inp_valid & eth_inp_data[33]) begin - eth_insp_state <= ETH_INSP_READ_ETH_PRE; + COM_INSP_WRITE_CPU_LIVE: begin + if (cpu_inp_ready & cpu_inp_valid & com_inp_data[33]) begin + com_insp_state <= COM_INSP_READ_COM_PRE; end end - endcase //eth_insp_state + endcase //com_insp_state end endmodule // packet_router |