diff options
Diffstat (limited to 'usrp2/control_lib/newfifo/fifo_2clock.v')
| -rw-r--r-- | usrp2/control_lib/newfifo/fifo_2clock.v | 117 |
1 files changed, 0 insertions, 117 deletions
diff --git a/usrp2/control_lib/newfifo/fifo_2clock.v b/usrp2/control_lib/newfifo/fifo_2clock.v deleted file mode 100644 index 34c85ccb4..000000000 --- a/usrp2/control_lib/newfifo/fifo_2clock.v +++ /dev/null @@ -1,117 +0,0 @@ - -// FIXME ignores the AWIDTH (fifo size) parameter - -module fifo_2clock - #(parameter WIDTH=36, SIZE=6) - (input wclk, input [WIDTH-1:0] datain, input src_rdy_i, output dst_rdy_o, output [15:0] space, - input rclk, output [WIDTH-1:0] dataout, output src_rdy_o, input dst_rdy_i, output [15:0] occupied, - input arst); - - wire [SIZE:0] level_rclk, level_wclk; // xilinx adds an extra bit if you ask for accurate levels - wire full, empty, write, read; - - assign dst_rdy_o = ~full; - assign src_rdy_o = ~empty; - assign write = src_rdy_i & dst_rdy_o; - assign read = src_rdy_o & dst_rdy_i; - - generate - if(WIDTH==36) - if(SIZE==9) - fifo_xlnx_512x36_2clk fifo_xlnx_512x36_2clk - (.rst(arst), - .wr_clk(wclk),.din(datain),.full(full),.wr_en(write),.wr_data_count(level_wclk), - .rd_clk(rclk),.dout(dataout),.empty(empty),.rd_en(read),.rd_data_count(level_rclk) ); - else if(SIZE==11) - fifo_xlnx_2Kx36_2clk fifo_xlnx_2Kx36_2clk - (.rst(arst), - .wr_clk(wclk),.din(datain),.full(full),.wr_en(write),.wr_data_count(level_wclk), - .rd_clk(rclk),.dout(dataout),.empty(empty),.rd_en(read),.rd_data_count(level_rclk) ); - else if(SIZE==6) - fifo_xlnx_64x36_2clk fifo_xlnx_64x36_2clk - (.rst(arst), - .wr_clk(wclk),.din(datain),.full(full),.wr_en(write),.wr_data_count(level_wclk), - .rd_clk(rclk),.dout(dataout),.empty(empty),.rd_en(read),.rd_data_count(level_rclk) ); - else - fifo_xlnx_512x36_2clk fifo_xlnx_512x36_2clk - (.rst(arst), - .wr_clk(wclk),.din(datain),.full(full),.wr_en(write),.wr_data_count(level_wclk), - .rd_clk(rclk),.dout(dataout),.empty(empty),.rd_en(read),.rd_data_count(level_rclk) ); - else if((WIDTH==19)|(WIDTH==18)) - if(SIZE==4) - fifo_xlnx_16x19_2clk fifo_xlnx_16x19_2clk - (.rst(arst), - .wr_clk(wclk),.din(datain),.full(full),.wr_en(write),.wr_data_count(level_wclk), - .rd_clk(rclk),.dout(dataout),.empty(empty),.rd_en(read),.rd_data_count(level_rclk) ); - endgenerate - - assign occupied = {{(16-SIZE-1){1'b0}},level_rclk}; - assign space = ((1<<SIZE)+1)-level_wclk; - -endmodule // fifo_2clock - -/* -`else - // ISE sucks, so the following doesn't work properly - - reg [AWIDTH-1:0] wr_addr, rd_addr; - wire [AWIDTH-1:0] wr_addr_rclk, rd_addr_wclk; - wire [AWIDTH-1:0] next_rd_addr; - wire enb_read; - - // Write side management - wire [AWIDTH-1:0] next_wr_addr = wr_addr + 1; - always @(posedge wclk or posedge arst) - if(arst) - wr_addr <= 0; - else if(write) - wr_addr <= next_wr_addr; - assign full = (next_wr_addr == rd_addr_wclk); - - // RAM for data storage. Data out is registered, complicating the - // read side logic - ram_2port #(.DWIDTH(DWIDTH),.AWIDTH(AWIDTH)) mac_rx_ff_ram - (.clka(wclk),.ena(1'b1),.wea(write),.addra(wr_addr),.dia(datain),.doa(), - .clkb(rclk),.enb(enb_read),.web(1'b0),.addrb(next_rd_addr),.dib(0),.dob(dataout) ); - - // Read side management - reg data_valid; - assign empty = ~data_valid; - assign next_rd_addr = rd_addr + data_valid; - assign enb_read = read | ~data_valid; - - always @(posedge rclk or posedge arst) - if(arst) - rd_addr <= 0; - else if(read) - rd_addr <= rd_addr + 1; - - always @(posedge rclk or posedge arst) - if(arst) - data_valid <= 0; - else - if(read & (next_rd_addr == wr_addr_rclk)) - data_valid <= 0; - else if(next_rd_addr != wr_addr_rclk) - data_valid <= 1; - - // Send pointers across clock domains via gray code - gray_send #(.WIDTH(AWIDTH)) send_wr_addr - (.clk_in(wclk),.addr_in(wr_addr), - .clk_out(rclk),.addr_out(wr_addr_rclk) ); - - gray_send #(.WIDTH(AWIDTH)) send_rd_addr - (.clk_in(rclk),.addr_in(rd_addr), - .clk_out(wclk),.addr_out(rd_addr_wclk) ); - - // Generate fullness info, these are approximate and may be delayed - // and are only for higher-level flow control. - // Only full and empty are guaranteed exact. - always @(posedge wclk) - level_wclk <= wr_addr - rd_addr_wclk; - always @(posedge rclk) - level_rclk <= wr_addr_rclk - rd_addr; -`endif -endmodule // fifo_2clock - -*/ |