1 files changed, 0 insertions, 168 deletions
diff --git a/usrp2/control_lib/newfifo/buffer_int.v b/usrp2/control_lib/newfifo/buffer_int.v
deleted file mode 100644
index b45ed3532..000000000
--- a/usrp2/control_lib/newfifo/buffer_int.v
+++ /dev/null
@@ -1,168 +0,0 @@
-
-// FIFO Interface to the 2K buffer RAMs
-// Read port is read-acknowledge
-// FIXME do we want to be able to interleave reads and writes?
-
-module buffer_int
-  #(parameter BUF_NUM = 0,
-    parameter BUF_SIZE = 9)
-    (// Control Interface
-     input clk,
-     input rst,
-     input [31:0] ctrl_word,
-     input go,
-     output done,
-     output error,
-     output idle,
-     output [1:0] flag,
-     
-     // Buffer Interface
-     output en_o,
-     output we_o,
-     output reg [BUF_SIZE-1:0] addr_o,
-     output [31:0] dat_to_buf,
-     input [31:0] dat_from_buf,
-     
-     // Write FIFO Interface
-     input [31:0] wr_data_i,
-     input [3:0] wr_flags_i,
-     input wr_ready_i,
-     output wr_ready_o,
-     
-     // Read FIFO Interface
-     output [31:0] rd_data_o,
-     output [3:0] rd_flags_o,
-     output rd_ready_o,
-     input rd_ready_i
-     );
-   
-   reg [31:0] ctrl_reg;
-   reg 	      go_reg;
-   
-   always @(posedge clk)
-     go_reg <= go;
-   
-   always @(posedge clk)
-     if(rst)
-       ctrl_reg <= 0;
-     else
-       if(go & (ctrl_word[31:28] == BUF_NUM))
-	 ctrl_reg <= ctrl_word;
-   
-   wire [BUF_SIZE-1:0] firstline = ctrl_reg[BUF_SIZE-1:0];
-   wire [BUF_SIZE-1:0] lastline = ctrl_reg[2*BUF_SIZE-1:BUF_SIZE];
-
-   wire       read = ctrl_reg[22];
-   wire       write = ctrl_reg[23];
-   wire       clear = ctrl_reg[24];
-   //wire [2:0] port = ctrl_reg[27:25];  // Ignored in this block
-   //wire [3:0] buff_num = ctrl_reg[31:28];  // Ignored here ?
-   
-   localparam IDLE = 3'd0;
-   localparam PRE_READ = 3'd1;
-   localparam READING = 3'd2;
-   localparam WRITING = 3'd3;
-   localparam ERROR = 3'd4;
-   localparam DONE = 3'd5;
-   
-   reg [2:0]  state;
-   reg 	      rd_sop, rd_eop;
-   wire       wr_sop, wr_eop, wr_error;
-   reg [1:0]  rd_occ;
-   wire [1:0] wr_occ;
-   
-   always @(posedge clk)
-     if(rst)
-       begin
-	  state <= IDLE;
-	  rd_sop <= 0;
-	  rd_eop <= 0;
-	  rd_occ <= 0;
-       end
-     else
-       if(clear)
-	 begin
-	    state <= IDLE;
-	    rd_sop <= 0;
-	    rd_eop <= 0;
-	    rd_occ <= 0;
-	 end
-       else 
-	 case(state)
-	   IDLE :
-	     if(go_reg & read)
-	       begin
-		  addr_o <= firstline;
-		  state <= PRE_READ;
-	       end
-	     else if(go_reg & write)
-	       begin
-		  addr_o <= firstline;
-		  state <= WRITING;
-	       end
-	   
-	   PRE_READ :
-	     begin
-		state <= READING;
-		addr_o <= addr_o + 1;
-		rd_occ <= 2'b00;
-		rd_sop <= 1;
-		rd_eop <= 0;
-	     end
-	   
-	   READING :
-	     if(rd_ready_i)
-	       begin
-		  rd_sop <= 0;
-		  addr_o <= addr_o + 1;
-		  if(addr_o == lastline)
-		    begin
-		       rd_eop <= 1;
-		       // FIXME assign occ here
-		       rd_occ <= 0;
-		    end
-		  else
-		    rd_eop <= 0;
-		  if(rd_eop)
-		    state <= DONE;
-	       end
-	   
-	   WRITING :
-	     begin
-		if(wr_ready_i)
-		  begin
-		     addr_o <= addr_o + 1;
-		     if(wr_error)
-		       begin
-			  state <= ERROR;
-			  // Save OCC flags here
-		       end
-		     else if((addr_o == lastline)||wr_eop)
-		       state <= DONE;
-		  end // if (wr_ready_i)
-	     end // case: WRITING
-	   
-	 endcase // case(state)
-   
-   assign     dat_to_buf = wr_data_i;
-   assign     rd_data_o = dat_from_buf;
-
-   assign     rd_flags_o = { rd_occ[1:0], rd_eop, rd_sop };
-   assign     rd_ready_o = (state == READING);
-   
-   assign     wr_sop = wr_flags_i[0];
-   assign     wr_eop = wr_flags_i[1];
-   assign     wr_occ = wr_flags_i[3:2];
-   assign     wr_error = wr_sop & wr_eop;
-   assign     wr_ready_o = (state == WRITING);
-
-   assign     we_o = (state == WRITING);
-   //assign     we_o = (state == WRITING) && wr_ready_i;  // always write to avoid timing issue
-
-   assign     en_o = ~((state==READING)& ~rd_ready_i);   // FIXME potential critical path
-   
-   assign     done = (state == DONE);
-   assign     error = (state == ERROR);
-   assign     idle = (state == IDLE);
-
-endmodule // buffer_int