diff options
Diffstat (limited to 'usrp1/sdr_lib/serial_io.v')
| -rw-r--r-- | usrp1/sdr_lib/serial_io.v | 118 |
1 files changed, 118 insertions, 0 deletions
diff --git a/usrp1/sdr_lib/serial_io.v b/usrp1/sdr_lib/serial_io.v new file mode 100644 index 000000000..62f92bed2 --- /dev/null +++ b/usrp1/sdr_lib/serial_io.v @@ -0,0 +1,118 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2003,2004 Matt Ettus +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + + + +// Serial Control Bus from Cypress chip + +module serial_io + ( input master_clk, + input serial_clock, + input serial_data_in, + input enable, + input reset, + inout wire serial_data_out, + output reg [6:0] serial_addr, + output reg [31:0] serial_data, + output wire serial_strobe, + input wire [31:0] readback_0, + input wire [31:0] readback_1, + input wire [31:0] readback_2, + input wire [31:0] readback_3, + input wire [31:0] readback_4, + input wire [31:0] readback_5, + input wire [31:0] readback_6, + input wire [31:0] readback_7 + ); + + reg is_read; + reg [7:0] ser_ctr; + reg write_done; + + assign serial_data_out = is_read ? serial_data[31] : 1'bz; + + always @(posedge serial_clock, posedge reset, negedge enable) + if(reset) + ser_ctr <= #1 8'd0; + else if(~enable) + ser_ctr <= #1 8'd0; + else if(ser_ctr == 39) + ser_ctr <= #1 8'd0; + else + ser_ctr <= #1 ser_ctr + 8'd1; + + always @(posedge serial_clock, posedge reset, negedge enable) + if(reset) + is_read <= #1 1'b0; + else if(~enable) + is_read <= #1 1'b0; + else if((ser_ctr == 7)&&(serial_addr[6]==1)) + is_read <= #1 1'b1; + + always @(posedge serial_clock, posedge reset) + if(reset) + begin + serial_addr <= #1 7'b0; + serial_data <= #1 32'b0; + write_done <= #1 1'b0; + end + else if(~enable) + begin + //serial_addr <= #1 7'b0; + //serial_data <= #1 32'b0; + write_done <= #1 1'b0; + end + else + begin + if(~is_read && (ser_ctr == 39)) + write_done <= #1 1'b1; + else + write_done <= #1 1'b0; + if(is_read & (ser_ctr==8)) + case (serial_addr) + 7'd1: serial_data <= #1 readback_0; + 7'd2: serial_data <= #1 readback_1; + 7'd3: serial_data <= #1 readback_2; + 7'd4: serial_data <= #1 readback_3; + 7'd5: serial_data <= #1 readback_4; + 7'd6: serial_data <= #1 readback_5; + 7'd7: serial_data <= #1 readback_6; + 7'd8: serial_data <= #1 readback_7; + default: serial_data <= #1 32'd0; + endcase // case(serial_addr) + else if(ser_ctr >= 8) + serial_data <= #1 {serial_data[30:0],serial_data_in}; + else if(ser_ctr < 8) + serial_addr <= #1 {serial_addr[5:0],serial_data_in}; + end // else: !if(~enable) + + reg enable_d1, enable_d2; + always @(posedge master_clk) + begin + enable_d1 <= #1 enable; + enable_d2 <= #1 enable_d1; + end + + assign serial_strobe = enable_d2 & ~enable_d1; + +endmodule // serial_io + + |