diff options
Diffstat (limited to 'top')
| -rw-r--r-- | top/u2_rev3_2rx_iad/Makefile | 254 | ||||
| -rw-r--r-- | top/u2_rev3_2rx_iad/README | 32 | ||||
| -rw-r--r-- | top/u2_rev3_2rx_iad/cmdfile | 4 | ||||
| -rw-r--r-- | top/u2_rev3_2rx_iad/dsp_core_rx.v | 212 | ||||
| -rw-r--r-- | top/u2_rev3_2rx_iad/dsp_core_tb.sav | 106 | ||||
| -rw-r--r-- | top/u2_rev3_2rx_iad/dsp_core_tb.v | 233 | ||||
| -rw-r--r-- | top/u2_rev3_2rx_iad/impulse.v | 68 | ||||
| -rwxr-xr-x | top/u2_rev3_2rx_iad/u2_core.v | 789 | ||||
| -rwxr-xr-x | top/u2_rev3_2rx_iad/wave.sh | 3 | ||||
| -rw-r--r-- | top/u2_rev3_iad/Makefile | 4 | ||||
| -rw-r--r-- | top/u2_rev3_iad/impulse.v | 2 | ||||
| -rw-r--r-- | top/u2_rev3_iad/integrate.v | 38 |
12 files changed, 1704 insertions, 41 deletions
diff --git a/top/u2_rev3_2rx_iad/Makefile b/top/u2_rev3_2rx_iad/Makefile new file mode 100644 index 000000000..5b7ed5a8e --- /dev/null +++ b/top/u2_rev3_2rx_iad/Makefile @@ -0,0 +1,254 @@ +# +# Copyright 2008 Ettus Research LLC +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +################################################## +# xtclsh Shell and tcl Script Path +################################################## +#XTCLSH := /opt/Xilinx/10.1/ISE/bin/lin/xtclsh +XTCLSH := xtclsh +ISE_HELPER := ../tcl/ise_helper.tcl + +################################################## +# Project Setup +################################################## +BUILD_DIR := build/ +export TOP_MODULE := u2_rev3 +export PROJ_FILE := $(BUILD_DIR)$(TOP_MODULE).ise + +################################################## +# Project Properties +################################################## +export PROJECT_PROPERTIES := \ +family Spartan3 \ +device xc3s2000 \ +package fg456 \ +speed -5 \ +top_level_module_type "HDL" \ +synthesis_tool "XST (VHDL/Verilog)" \ +simulator "ISE Simulator (VHDL/Verilog)" \ +"Preferred Language" "Verilog" \ +"Enable Message Filtering" FALSE \ +"Display Incremental Messages" FALSE + +################################################## +# Sources +################################################## +export SOURCE_ROOT := ../../../ +export SOURCES := \ +control_lib/CRC16_D16.v \ +control_lib/atr_controller.v \ +control_lib/bin2gray.v \ +control_lib/buffer_int.v \ +control_lib/buffer_pool.v \ +control_lib/cascadefifo2.v \ +control_lib/dcache.v \ +control_lib/decoder_3_8.v \ +control_lib/dpram32.v \ +control_lib/fifo_2clock.v \ +control_lib/fifo_2clock_casc.v \ +control_lib/gray2bin.v \ +control_lib/gray_send.v \ +control_lib/icache.v \ +control_lib/longfifo.v \ +control_lib/mux4.v \ +control_lib/mux8.v \ +control_lib/nsgpio.v \ +control_lib/ram_2port.v \ +control_lib/ram_harv_cache.v \ +control_lib/ram_loader.v \ +control_lib/setting_reg.v \ +control_lib/settings_bus.v \ +control_lib/shortfifo.v \ +control_lib/medfifo.v \ +control_lib/srl.v \ +control_lib/system_control.v \ +control_lib/wb_1master.v \ +control_lib/wb_readback_mux.v \ +control_lib/simple_uart.v \ +control_lib/simple_uart_tx.v \ +control_lib/simple_uart_rx.v \ +control_lib/oneshot_2clk.v \ +control_lib/sd_spi.v \ +control_lib/sd_spi_wb.v \ +control_lib/wb_bridge_16_32.v \ +coregen/fifo_xlnx_2Kx36_2clk.v \ +coregen/fifo_xlnx_2Kx36_2clk.xco \ +coregen/fifo_xlnx_512x36_2clk.v \ +coregen/fifo_xlnx_512x36_2clk.xco \ +eth/mac_rxfifo_int.v \ +eth/mac_txfifo_int.v \ +eth/rtl/verilog/Clk_ctrl.v \ +eth/rtl/verilog/MAC_rx.v \ +eth/rtl/verilog/MAC_rx/Broadcast_filter.v \ +eth/rtl/verilog/MAC_rx/CRC_chk.v \ +eth/rtl/verilog/MAC_rx/MAC_rx_FF.v \ +eth/rtl/verilog/MAC_rx/MAC_rx_add_chk.v \ +eth/rtl/verilog/MAC_rx/MAC_rx_ctrl.v \ +eth/rtl/verilog/MAC_top.v \ +eth/rtl/verilog/MAC_tx.v \ +eth/rtl/verilog/MAC_tx/CRC_gen.v \ +eth/rtl/verilog/MAC_tx/MAC_tx_FF.v \ +eth/rtl/verilog/MAC_tx/MAC_tx_addr_add.v \ +eth/rtl/verilog/MAC_tx/MAC_tx_ctrl.v \ +eth/rtl/verilog/MAC_tx/Random_gen.v \ +eth/rtl/verilog/Phy_int.v \ +eth/rtl/verilog/RMON.v \ +eth/rtl/verilog/RMON/RMON_addr_gen.v \ +eth/rtl/verilog/RMON/RMON_ctrl.v \ +eth/rtl/verilog/Reg_int.v \ +eth/rtl/verilog/eth_miim.v \ +eth/rtl/verilog/flow_ctrl_rx.v \ +eth/rtl/verilog/flow_ctrl_tx.v \ +eth/rtl/verilog/miim/eth_clockgen.v \ +eth/rtl/verilog/miim/eth_outputcontrol.v \ +eth/rtl/verilog/miim/eth_shiftreg.v \ +extram/wb_zbt16_b.v \ +opencores/8b10b/decode_8b10b.v \ +opencores/8b10b/encode_8b10b.v \ +opencores/aemb/rtl/verilog/aeMB_bpcu.v \ +opencores/aemb/rtl/verilog/aeMB_core_BE.v \ +opencores/aemb/rtl/verilog/aeMB_ctrl.v \ +opencores/aemb/rtl/verilog/aeMB_edk32.v \ +opencores/aemb/rtl/verilog/aeMB_ibuf.v \ +opencores/aemb/rtl/verilog/aeMB_regf.v \ +opencores/aemb/rtl/verilog/aeMB_xecu.v \ +opencores/i2c/rtl/verilog/i2c_master_bit_ctrl.v \ +opencores/i2c/rtl/verilog/i2c_master_byte_ctrl.v \ +opencores/i2c/rtl/verilog/i2c_master_defines.v \ +opencores/i2c/rtl/verilog/i2c_master_top.v \ +opencores/i2c/rtl/verilog/timescale.v \ +opencores/simple_pic/rtl/simple_pic.v \ +opencores/spi/rtl/verilog/spi_clgen.v \ +opencores/spi/rtl/verilog/spi_defines.v \ +opencores/spi/rtl/verilog/spi_shift.v \ +opencores/spi/rtl/verilog/spi_top.v \ +opencores/spi/rtl/verilog/timescale.v \ +sdr_lib/acc.v \ +sdr_lib/add2.v \ +sdr_lib/add2_and_round.v \ +sdr_lib/add2_and_round_reg.v \ +sdr_lib/add2_reg.v \ +sdr_lib/cic_dec_shifter.v \ +sdr_lib/cic_decim.v \ +sdr_lib/cic_int_shifter.v \ +sdr_lib/cic_interp.v \ +sdr_lib/cic_strober.v \ +sdr_lib/clip.v \ +sdr_lib/clip_reg.v \ +sdr_lib/cordic.v \ +sdr_lib/cordic_z24.v \ +sdr_lib/cordic_stage.v \ +sdr_lib/dsp_core_tx.v \ +sdr_lib/hb_dec.v \ +sdr_lib/hb_interp.v \ +sdr_lib/integrate.v \ +sdr_lib/round.v \ +sdr_lib/round_reg.v \ +sdr_lib/rx_control.v \ +sdr_lib/rx_dcoffset.v \ +sdr_lib/sign_extend.v \ +sdr_lib/small_hb_dec.v \ +sdr_lib/small_hb_int.v \ +sdr_lib/tx_control.v \ +serdes/serdes.v \ +serdes/serdes_fc_rx.v \ +serdes/serdes_fc_tx.v \ +serdes/serdes_rx.v \ +serdes/serdes_tx.v \ +timing/time_receiver.v \ +timing/time_sender.v \ +timing/time_sync.v \ +timing/timer.v \ +top/u2_rev3/u2_rev3.ucf \ +top/u2_rev3/u2_rev3.v \ +top/u2_rev3_2rx_iad/u2_core.v \ +top/u2_rev3_2rx_iad/dsp_core_rx.v + +################################################## +# Process Properties +################################################## +export SYNTHESIZE_PROPERTIES := \ +"Number of Clock Buffers" 6 \ +"Pack I/O Registers into IOBs" Yes \ +"Optimization Effort" High \ +"Optimize Instantiated Primitives" TRUE \ +"Register Balancing" Yes \ +"Use Clock Enable" Auto \ +"Use Synchronous Reset" Auto \ +"Use Synchronous Set" Auto + +export TRANSLATE_PROPERTIES := \ +"Macro Search Path" "$(shell pwd)/../../coregen/" + +export MAP_PROPERTIES := \ +"Allow Logic Optimization Across Hierarchy" TRUE \ +"Map to Input Functions" 4 \ +"Optimization Strategy (Cover Mode)" Speed \ +"Pack I/O Registers/Latches into IOBs" "For Inputs and Outputs" \ +"Perform Timing-Driven Packing and Placement" TRUE \ +"Map Effort Level" High \ +"Extra Effort" Normal \ +"Combinatorial Logic Optimization" TRUE \ +"Register Duplication" TRUE + +export PLACE_ROUTE_PROPERTIES := \ +"Place & Route Effort Level (Overall)" High + +export STATIC_TIMING_PROPERTIES := \ +"Number of Paths in Error/Verbose Report" 10 \ +"Report Type" "Error Report" + +export GEN_PROG_FILE_PROPERTIES := \ +"Configuration Rate" 6 \ +"Create Binary Configuration File" TRUE \ +"Done (Output Events)" 5 \ +"Enable Bitstream Compression" TRUE \ +"Enable Outputs (Output Events)" 6 + +export SIM_MODEL_PROPERTIES := "" + +################################################## +# Make Options +################################################## +all: + @echo make proj, check, synth, bin, testbench, or clean + +proj: + PROCESS_RUN="" $(XTCLSH) $(ISE_HELPER) + +check: + PROCESS_RUN="Check Syntax" $(XTCLSH) $(ISE_HELPER) + +synth: + PROCESS_RUN="Synthesize - XST" $(XTCLSH) $(ISE_HELPER) + +bin: + PROCESS_RUN="Generate Programming File" $(XTCLSH) $(ISE_HELPER) + +testbench: + iverilog -c cmdfile -o dsp_core_tb dsp_core_tb.v + +clean: + rm -rf $(BUILD_DIR) + rm -f dsp_core_tb + rm -f *.lx2 + rm -f *.dat + rm -f *.vcd diff --git a/top/u2_rev3_2rx_iad/README b/top/u2_rev3_2rx_iad/README new file mode 100644 index 000000000..3efc5305b --- /dev/null +++ b/top/u2_rev3_2rx_iad/README @@ -0,0 +1,32 @@ +This is a custom build for USRP2 FPGA. It allows using a BasicRX or +LFRX board and feed two independent, real signals. In addition, instead +of the CIC/HB decimator, which optimizes frequency response, it uses an +integrate and dump decimator, which optimizes for time-domain impulse +response. + +These changes have been made in dsp_core_rx.v: + +* A second DDC has been added, sharing a frequency register with + the existing DDC. + +* The output of the two DDCs are interleaved as I1 Q1 I2 Q2I ... + into the receive FIFO. This limits the host configured decimation + to 8 intead of 4. Use gr.deinterleave to recover the streams. + +* The ADCs are hardcoded: + + RX_A ==> DDC #1 I-input + 0 ==> DDC #1 Q-input + RX_B ==> DDC #2 I-input + 0 ==> DDC #2 Q-input + + Thus, the input mux has been disabled. + +* The CIC/HB decimator has been replaced by an integrate and dump at + the decimation rate. + +* To assist with meeting timing, the external RAM has been disabled. + +The basic application is to coherently sample two real IF streams and +downconvert to baseband, while minimizing the impulse response duration +of the resampling filters. diff --git a/top/u2_rev3_2rx_iad/cmdfile b/top/u2_rev3_2rx_iad/cmdfile new file mode 100644 index 000000000..34373a676 --- /dev/null +++ b/top/u2_rev3_2rx_iad/cmdfile @@ -0,0 +1,4 @@ +-y . +-y ../../sdr_lib +-y ../../control_lib +-y ../../models diff --git a/top/u2_rev3_2rx_iad/dsp_core_rx.v b/top/u2_rev3_2rx_iad/dsp_core_rx.v new file mode 100644 index 000000000..4a945bd1a --- /dev/null +++ b/top/u2_rev3_2rx_iad/dsp_core_rx.v @@ -0,0 +1,212 @@ +`define DSP_CORE_RX_BASE 160 +module dsp_core_rx + (input clk, input rst, + input set_stb, input [7:0] set_addr, input [31:0] set_data, + + input [13:0] adc_a, input adc_ovf_a, + input [13:0] adc_b, input adc_ovf_b, + + input [15:0] io_rx, + + output reg [31:0] sample, + input run, + output strobe, + output [31:0] debug + ); + + wire [15:0] scale_i, scale_q; + wire [13:0] adc_a_ofs, adc_b_ofs; + reg [13:0] adc_i, adc_q; + wire [31:0] phase_inc; + reg [31:0] phase; + + wire [35:0] prod_i, prod_q; + wire [23:0] i_cordic_a, q_cordic_a, i_cordic_b, q_cordic_b; + wire [31:0] i_iad_a, q_iad_a, i_iad_b, q_iad_b; + wire [15:0] i_out_a, q_out_a, i_out_b, q_out_b; + + wire enable_hb1, enable_hb2; // Correspond to std firmware settings + wire [7:0] cic_decim; // for combined CIC/HB decimator + wire [9:0] decim_rate; // Reconstructed original decimation setting + + setting_reg #(.my_addr(`DSP_CORE_RX_BASE+0)) sr_0 + (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(phase_inc),.changed()); + + setting_reg #(.my_addr(`DSP_CORE_RX_BASE+1)) sr_1 + (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out({scale_i,scale_q}),.changed()); + + setting_reg #(.my_addr(`DSP_CORE_RX_BASE+2)) sr_2 + (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out({enable_hb1,enable_hb2,cic_decim}),.changed()); + + rx_dcoffset #(.WIDTH(14),.ADDR(`DSP_CORE_RX_BASE+6)) rx_dcoffset_a + (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .adc_in(adc_a),.adc_out(adc_a_ofs)); + + rx_dcoffset #(.WIDTH(14),.ADDR(`DSP_CORE_RX_BASE+7)) rx_dcoffset_b + (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .adc_in(adc_b),.adc_out(adc_b_ofs)); + +`ifdef MUXCTRL + wire [3:0] muxctrl; + setting_reg #(.my_addr(`DSP_CORE_RX_BASE+8)) sr_8 + (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(muxctrl),.changed()); +`endif + + wire [1:0] gpio_ena; + setting_reg #(.my_addr(`DSP_CORE_RX_BASE+9)) sr_9 + (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(gpio_ena),.changed()); + + // The TVRX connects to what is called adc_b, thus A and B are + // swapped throughout the design. + // + // In the interest of expediency and keeping the s/w sane, we just remap them here. + // The I & Q fields are mapped the same: + // 0 -> "the real A" (as determined by the TVRX) + // 1 -> "the real B" + // 2 -> const zero + +`ifdef MUXCTRL + always @(posedge clk) + case(muxctrl[1:0]) // The I mapping + 0: adc_i <= adc_b_ofs; // "the real A" + 1: adc_i <= adc_a_ofs; + 2: adc_i <= 0; + default: adc_i <= 0; + endcase // case(muxctrl[1:0]) + + always @(posedge clk) + case(muxctrl[3:2]) // The Q mapping + 0: adc_q <= adc_b_ofs; // "the real A" + 1: adc_q <= adc_a_ofs; + 2: adc_q <= 0; + default: adc_q <= 0; + endcase // case(muxctrl[3:2]) +`else // !`ifdef MUXCTRL + always @(posedge clk) + begin + adc_i <= adc_a_ofs; + adc_q <= adc_b_ofs; + end +`endif // !`ifdef MUXCTRL + + always @(posedge clk) + if(rst) + phase <= 0; + else if(~run) + phase <= 0; + else + phase <= phase + phase_inc; + + MULT18X18S mult_i + (.P(prod_i), // 36-bit multiplier output + .A({{4{adc_i[13]}},adc_i} ), // 18-bit multiplier input + .B({{2{scale_i[15]}},scale_i}), // 18-bit multiplier input + .C(clk), // Clock input + .CE(1), // Clock enable input + .R(rst) // Synchronous reset input + ); + + MULT18X18S mult_q + (.P(prod_q), // 36-bit multiplier output + .A({{4{adc_q[13]}},adc_q} ), // 18-bit multiplier input + .B({{2{scale_q[15]}},scale_q}), // 18-bit multiplier input + .C(clk), // Clock input + .CE(1), // Clock enable input + .R(rst) // Synchronous reset input + ); + + + // Route I,0 to first CORDIC + cordic_z24 #(.bitwidth(24)) + cordic_a(.clock(clk), .reset(rst), .enable(run), + .xi(prod_i[24:1]),. yi(0), .zi(phase[31:8]), + .xo(i_cordic_a),.yo(q_cordic_a),.zo() ); + + // Route Q,0 to second CORDIC + cordic_z24 #(.bitwidth(24)) + cordic_b(.clock(clk), .reset(rst), .enable(run), + .xi(prod_q[24:1]),. yi(0), .zi(phase[31:8]), + .xo(i_cordic_b),.yo(q_cordic_b),.zo() ); + + // Reconstruct original decimation rate from standard firmware settings + assign decim_rate = enable_hb2 ? (enable_hb1 ? {cic_decim,2'b0} : + {1'b0,cic_decim,1'b0 }) : + cic_decim; + + cic_strober #(.WIDTH(10)) // Convenient reuse of strobe generator + cic_strober(.clock(clk),.reset(rst),.enable(run),.rate(decim_rate), + .strobe_fast(1),.strobe_slow(strobe_iad) ); + + wire strobe_iad_o; + + integrate #(.INPUTW(24),.ACCUMW(32),.OUTPUTW(32)) integrator_i_a + (.clk_i(clk),.rst_i(rst),.ena_i(run), + .dump_i(strobe_iad),.data_i(i_cordic_a), + .stb_o(strobe_iad_o),.integ_o(i_iad_a) ); + + integrate #(.INPUTW(24),.ACCUMW(32),.OUTPUTW(32)) integrator_q_a + (.clk_i(clk),.rst_i(rst),.ena_i(run), + .dump_i(strobe_iad),.data_i(q_cordic_a), + .stb_o(),.integ_o(q_iad_a) ); + + integrate #(.INPUTW(24),.ACCUMW(32),.OUTPUTW(32)) integrator_i_b + (.clk_i(clk),.rst_i(rst),.ena_i(run), + .dump_i(strobe_iad),.data_i(i_cordic_b), + .stb_o(),.integ_o(i_iad_b) ); + + integrate #(.INPUTW(24),.ACCUMW(32),.OUTPUTW(32)) integrator_q_b + (.clk_i(clk),.rst_i(rst),.ena_i(run), + .dump_i(strobe_iad),.data_i(q_cordic_b), + .stb_o(),.integ_o(q_iad_b) ); + + round #(.bits_in(32),.bits_out(16)) round_iout_a (.in(i_iad_a),.out(i_out_a)); + round #(.bits_in(32),.bits_out(16)) round_qout_a (.in(q_iad_a),.out(q_out_a)); + round #(.bits_in(32),.bits_out(16)) round_iout_b (.in(i_iad_b),.out(i_out_b)); + round #(.bits_in(32),.bits_out(16)) round_qout_b (.in(q_iad_b),.out(q_out_b)); + + reg [31:0] sample_out_a, sample_out_b, sample_out; + reg stb_d1, stb_d2, stb_d3, stb_d4, stb_d5; + reg strobe_out; + + // Register samples on strobe_iad + // Output A on d1 + // Output B on d5 + always @(posedge clk) + begin + stb_d1 <= strobe_iad_o; + stb_d2 <= stb_d1; + stb_d3 <= stb_d2; + stb_d4 <= stb_d3; + stb_d5 <= stb_d4; + end + + always @(posedge clk) + if (strobe_iad_o) + begin + // Streaming GPIO + // io_rx[15] => I channel LSB if gpio_ena[0] high + // io_rx[14] => Q channel LSB if gpio_ena[1] high + sample_out_a <= {i_out_a[15:1], gpio_ena[0] ? io_rx[15] : i_out_a[0], + q_out_a[15:1], gpio_ena[1] ? io_rx[14] : q_out_a[0] }; + sample_out_b <= {i_out_b[15:1], gpio_ena[0] ? io_rx[15] : i_out_b[0], + q_out_b[15:1], gpio_ena[1] ? io_rx[14] : q_out_b[0] }; + end + + always @(posedge clk) + begin + if (stb_d1) + sample <= sample_out_a; + else if (stb_d5) + sample <= sample_out_b; + strobe_out <= stb_d1|stb_d5; + end + + assign strobe = strobe_out; + assign debug = 0; + +endmodule // dsp_core_rx diff --git a/top/u2_rev3_2rx_iad/dsp_core_tb.sav b/top/u2_rev3_2rx_iad/dsp_core_tb.sav new file mode 100644 index 000000000..12f746860 --- /dev/null +++ b/top/u2_rev3_2rx_iad/dsp_core_tb.sav @@ -0,0 +1,106 @@ +[size] 1680 975 +[pos] -1 -1 +*-17.007835 70679400 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 +[treeopen] dsp_core_tb. +@200 +-SYSCON +@28 +dsp_core_tb.clk +dsp_core_tb.rst +dsp_core_tb.run +@200 +- +-Settings Bus +@22 +dsp_core_tb.set_addr[7:0] +@24 +dsp_core_tb.set_data[31:0] +@28 +dsp_core_tb.set_stb +@200 +- +-RX DSP CORE +@22 +dsp_core_tb.rx_path.adc_a[13:0] +dsp_core_tb.rx_path.adc_b[13:0] +@28 +dsp_core_tb.rx_path.adc_ovf_a +dsp_core_tb.rx_path.adc_ovf_b +@22 +dsp_core_tb.rx_path.io_rx[15:0] +@200 +- +@22 +dsp_core_tb.rx_path.sample[31:0] +@28 +dsp_core_tb.rx_path.strobe +@200 +- +@22 +dsp_core_tb.rx_path.phase_inc[31:0] +dsp_core_tb.rx_path.scale_i[15:0] +dsp_core_tb.rx_path.scale_q[15:0] +@28 +dsp_core_tb.rx_path.enable_hb1 +dsp_core_tb.rx_path.enable_hb2 +@22 +dsp_core_tb.rx_path.cic_decim[7:0] +dsp_core_tb.rx_path.adc_a_ofs[13:0] +dsp_core_tb.rx_path.adc_b_ofs[13:0] +dsp_core_tb.rx_path.muxctrl[3:0] +@200 +- +@22 +dsp_core_tb.rx_path.adc_i[13:0] +dsp_core_tb.rx_path.adc_q[13:0] +dsp_core_tb.rx_path.phase[31:0] +dsp_core_tb.rx_path.prod_i[35:0] +dsp_core_tb.rx_path.prod_q[35:0] +@8420 +dsp_core_tb.rx_path.i_cordic_a[23:0] +dsp_core_tb.rx_path.q_cordic_a[23:0] +dsp_core_tb.rx_path.i_cordic_b[23:0] +dsp_core_tb.rx_path.q_cordic_b[23:0] +@22 +dsp_core_tb.rx_path.decim_rate[9:0] +@28 +dsp_core_tb.rx_path.strobe_iad +@22 +dsp_core_tb.rx_path.i_iad_a[31:0] +dsp_core_tb.rx_path.q_iad_a[31:0] +@23 +dsp_core_tb.rx_path.i_iad_b[31:0] +@22 +dsp_core_tb.rx_path.q_iad_b[31:0] +@28 +dsp_core_tb.rx_path.strobe_iad_o +@8420 +dsp_core_tb.rx_path.i_out_a[15:0] +dsp_core_tb.rx_path.q_out_a[15:0] +dsp_core_tb.rx_path.i_out_b[15:0] +dsp_core_tb.rx_path.q_out_b[15:0] +@28 +dsp_core_tb.rx_path.gpio_ena[1:0] +@22 +dsp_core_tb.rx_path.sample_out_a[31:0] +dsp_core_tb.rx_path.sample_out_b[31:0] +dsp_core_tb.rx_path.sample[31:0] +@28 +dsp_core_tb.rx_path.strobe_out +dsp_core_tb.rx_path.stb_d1 +dsp_core_tb.rx_path.stb_d2 +dsp_core_tb.rx_path.stb_d3 +dsp_core_tb.rx_path.stb_d4 +dsp_core_tb.rx_path.stb_d5 +@200 +- +-FIFO Bus +@22 +dsp_core_tb.master_time[31:0] +dsp_core_tb.wr_dat[31:0] +@28 +dsp_core_tb.wr_done +dsp_core_tb.wr_error +dsp_core_tb.wr_full +dsp_core_tb.wr_ready +dsp_core_tb.wr_write diff --git a/top/u2_rev3_2rx_iad/dsp_core_tb.v b/top/u2_rev3_2rx_iad/dsp_core_tb.v new file mode 100644 index 000000000..d947df40a --- /dev/null +++ b/top/u2_rev3_2rx_iad/dsp_core_tb.v @@ -0,0 +1,233 @@ +`timescale 1ns / 100ps + +module dsp_core_tb; + +/////////////////////////////////////////////////////////////////////////////////// +// Sim-wide wires/busses // +/////////////////////////////////////////////////////////////////////////////////// + + // System control bus + reg clk = 0; + reg rst = 1; + + // Configuration bus + reg set_stb = 0; + reg [7:0] set_addr = 0; + reg [31:0] set_data = 0; + + // ADC input bus + wire signed [13:0] adc_a; + wire signed [13:0] adc_b; + wire adc_ovf_a; + wire adc_ovf_b; + + // RX sample bus + reg run = 1; + wire [31:0] sample; + wire stb; + +/////////////////////////////////////////////////////////////////////////////////// +// Simulation control // +/////////////////////////////////////////////////////////////////////////////////// + + // Set up output files + initial begin + $dumpfile("dsp_core_tb.vcd"); + $dumpvars(0,dsp_core_tb); + end + + // Update display every 10 us + always #1000 $monitor("Time in us ",$time/1000); + + // Generate master clock 50% @ 100 MHz + always + #5 clk = ~clk; + +/////////////////////////////////////////////////////////////////////////////////// +// Unit(s) under test // +/////////////////////////////////////////////////////////////////////////////////// + + reg [13:0] amplitude = 13'h1fff; + reg [15:0] impulse_len = 0; + reg [15:0] zero_len = 0; + reg adc_ena = 0; + + initial #500 @(posedge clk) adc_ena = 1; + + impulse adc + (.clk(clk),.rst(rst),.ena(adc_ena), + .dc_offset_a(0),.dc_offset_b(0), + .amplitude(amplitude), + .impulse_len(impulse_len),.zero_len(zero_len), + .adc_a(adc_a),.adc_b(adc_b), + .adc_ovf_a(adc_ovf_a),.adc_ovf_b(adc_ovf_b) ); + + initial rx_path.rx_dcoffset_a.integrator = 0; // so sim doesn't propagate X's + initial rx_path.rx_dcoffset_b.integrator = 0; // generated before reset + dsp_core_rx rx_path + (.clk(clk),.rst(rst), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .adc_a(adc_a),.adc_ovf_a(adc_ovf_a), + .adc_b(adc_b),.adc_ovf_b(adc_ovf_b), + .io_rx(16'b0), + .run(adc_ena),.sample(sample),.strobe(stb), + .debug() ); + + reg [31:0] master_time = 0; + always @(posedge clk) + master_time <= master_time + 1; + + reg wr_ready = 1; + reg wr_full = 0; + + wire [31:0] wr_dat; + wire wr_write; + wire wr_done; + wire wr_error; + wire [15:0] fifo_occupied; + wire fifo_full; + wire fifo_empty; + + rx_control rx_buffer + (.clk(clk),.rst(rst), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .master_time(master_time), + .overrun(), // unconnected output + .wr_dat_o(wr_dat), + .wr_write_o(wr_write), + .wr_done_o(wr_done), + .wr_error_o(wr_error), + .wr_ready_i(wr_ready), + .wr_full_i(wr_full), + .sample(sample), + .run(), // unconnected output, supposed to drive 'run' + .strobe(stb), + .fifo_occupied(fifo_occupied), + .fifo_full(fifo_full), + .fifo_empty(fifo_empty), + .debug_rx() // unconnected output + ); + + + +/////////////////////////////////////////////////////////////////////////////////// +// Simulation output/checking // +/////////////////////////////////////////////////////////////////////////////////// + + integer rx_file; + + initial + rx_file = $fopen("rx.dat", "wb"); + + always @(posedge clk) + begin + // Write RX sample I&Q in format Octave can load + if (stb) + begin + $fwrite(rx_file, sample[31:16]); + $fputc(32, rx_file); + $fwrite(rx_file, sample[15:0]); + $fputc(13, rx_file); + end + end + +/////////////////////////////////////////////////////////////////////////////////// +// Tasks // +/////////////////////////////////////////////////////////////////////////////////// + + task power_on; + begin + @(posedge clk) + rst = #1 1'b1; + @(posedge clk) + rst = #1 1'b0; + end + endtask // power_on + + task set_impulse_len; + input [15:0] len; + @(posedge clk) impulse_len = len-1; + endtask + + task set_zero_len; + input [15:0] len; + @(posedge clk) zero_len = len-1; + endtask + + // Strobe configuration bus with addr, data + task write_cfg_register; + input [7:0] regno; + input [31:0] value; + + begin + @(posedge clk); + set_addr <= regno; + set_data <= value; + set_stb <= 1'b1; + @(posedge clk); + set_stb <= 1'b0; + end + endtask // write_cfg_register + + // Set RX DDC frequency + task set_ddc_freq; + input [31:0] freq; + + write_cfg_register(160, freq); + endtask // set_ddc_freq + + // Set RX IQ scaling registers + task set_rx_scale_iq; + input [15:0] scale_i; + input [15:0] scale_q; + + write_cfg_register(161, {scale_i,scale_q}); + endtask // set_rx_scale_iq + + // Set RX MUX control + task set_rx_muxctrl; + input [3:0] muxctrl; + + write_cfg_register(168, muxctrl); + endtask // set_rx_muxctrl + + // Set RX CIC decim and halfband enables + task set_decim; + input hb1_ena; + input hb2_ena; + input [7:0] decim; + + write_cfg_register(162, {hb1_ena,hb2_ena,decim}); + endtask // set_decim + + +/////////////////////////////////////////////////////////////////////////////////// +// Individual tests // +/////////////////////////////////////////////////////////////////////////////////// + + task test_rx; + begin + set_impulse_len(10); + set_zero_len(990); + set_rx_muxctrl(1); + set_ddc_freq(32'h10000000); + set_rx_scale_iq(1243, 1243); + set_decim(1, 1, 1); + + #100000 $finish; + end + endtask // test_rx + + +/////////////////////////////////////////////////////////////////////////////////// +// Top-level test // +/////////////////////////////////////////////////////////////////////////////////// + + // Execute tests + initial + begin + power_on(); + test_rx(); + end + +endmodule // dsp_core_tb diff --git a/top/u2_rev3_2rx_iad/impulse.v b/top/u2_rev3_2rx_iad/impulse.v new file mode 100644 index 000000000..fc5e3c1ed --- /dev/null +++ b/top/u2_rev3_2rx_iad/impulse.v @@ -0,0 +1,68 @@ +module impulse + (input clk, + input rst, + input ena, + + input [13:0] dc_offset_a, + input [13:0] dc_offset_b, + input [13:0] amplitude, + input [15:0] impulse_len, + input [15:0] zero_len, + + output [13:0] adc_a, + output [13:0] adc_b, + output adc_ovf_a, + output adc_ovf_b + ); + + reg [13:0] adc_a_int = 0; + reg [13:0] adc_b_int = 0; + + reg [15:0] count; + + localparam ST_ZERO = 0; + localparam ST_HIGH = 1; + reg state; + + always @(posedge clk) + if (rst | ~ena) + begin + adc_a_int <= 0; + adc_b_int <= 0; + count <= 0; + state <= ST_ZERO; + end + else + case(state) + ST_ZERO: + if (count == zero_len) + begin + adc_a_int <= amplitude; + adc_b_int <= amplitude >> 2; + state <= ST_HIGH; + count <= 0; + end + else + count <= count + 1; + + ST_HIGH: + if (count == impulse_len) + begin + adc_a_int <= 0; + adc_b_int <= 0; + state <= ST_ZERO; + count <= 0; + end + else + count <= count + 1; + + endcase // case (state) + + assign adc_a = adc_a_int + dc_offset_a; + assign adc_b = adc_b_int + dc_offset_b; + + // Ignore for now + assign adc_ovf_a = 0; + assign adc_ovf_b = 0; + +endmodule // impulse diff --git a/top/u2_rev3_2rx_iad/u2_core.v b/top/u2_rev3_2rx_iad/u2_core.v new file mode 100755 index 000000000..3d96a4e0e --- /dev/null +++ b/top/u2_rev3_2rx_iad/u2_core.v @@ -0,0 +1,789 @@ +// //////////////////////////////////////////////////////////////////////////////// +// Module Name: u2_core +// //////////////////////////////////////////////////////////////////////////////// + +module u2_core + #(parameter RAM_SIZE=32768) + (// Clocks + input dsp_clk, + input wb_clk, + output clock_ready, + input clk_to_mac, + input pps_in, + + // Misc, debug + output [7:0] leds, + output [31:0] debug, + output [1:0] debug_clk, + + // Expansion + input exp_pps_in, + output exp_pps_out, + + // GMII + // GMII-CTRL + input GMII_COL, + input GMII_CRS, + + // GMII-TX + output [7:0] GMII_TXD, + output GMII_TX_EN, + output GMII_TX_ER, + output GMII_GTX_CLK, + input GMII_TX_CLK, // 100mbps clk + + // GMII-RX + input [7:0] GMII_RXD, + input GMII_RX_CLK, + input GMII_RX_DV, + input GMII_RX_ER, + + // GMII-Management + inout MDIO, + output MDC, + input PHY_INTn, // open drain + output PHY_RESETn, + + // SERDES + output ser_enable, + output ser_prbsen, + output ser_loopen, + output ser_rx_en, + + output ser_tx_clk, + output [15:0] ser_t, + output ser_tklsb, + output ser_tkmsb, + + input ser_rx_clk, + input [15:0] ser_r, + input ser_rklsb, + input ser_rkmsb, + + // CPLD interface + output cpld_start, + output cpld_mode, + output cpld_done, + input cpld_din, + input cpld_clk, + input cpld_detached, + output cpld_misc, + input cpld_init_b, + input por, + output config_success, + + // ADC + input [13:0] adc_a, + input adc_ovf_a, + output adc_on_a, + output adc_oe_a, + + input [13:0] adc_b, + input adc_ovf_b, + output adc_on_b, + output adc_oe_b, + + // DAC + output [15:0] dac_a, + output [15:0] dac_b, + + // I2C + input scl_pad_i, + output scl_pad_o, + output scl_pad_oen_o, + input sda_pad_i, + output sda_pad_o, + output sda_pad_oen_o, + + // Clock Gen Control + output [1:0] clk_en, + output [1:0] clk_sel, + input clk_func, // FIXME is an input to control the 9510 + input clk_status, + + // Generic SPI + output sclk, + output mosi, + input miso, + output sen_clk, + output sen_dac, + output sen_tx_db, + output sen_tx_adc, + output sen_tx_dac, + output sen_rx_db, + output sen_rx_adc, + output sen_rx_dac, + + // GPIO to DBoards + inout [15:0] io_tx, + inout [15:0] io_rx, + + // External RAM + inout [17:0] RAM_D, + output [18:0] RAM_A, + output RAM_CE1n, + output RAM_CENn, + output RAM_CLK, + output RAM_WEn, + output RAM_OEn, + output RAM_LDn, + + // Debug stuff + output uart_tx_o, + input uart_rx_i, + output uart_baud_o, + input sim_mode, + input [3:0] clock_divider + ); + + wire [7:0] set_addr; + wire [31:0] set_data; + wire set_stb; + + wire ram_loader_done; + wire ram_loader_rst, wb_rst, dsp_rst; + + wire [31:0] status, status_b0, status_b1, status_b2, status_b3, status_b4, status_b5, status_b6, status_b7; + wire bus_error, spi_int, i2c_int, pps_int, timer_int, buffer_int, proc_int, overrun, underrun, uart_tx_int, uart_rx_int; + + wire [31:0] debug_gpio_0, debug_gpio_1; + wire [31:0] atr_lines; + + wire [31:0] debug_rx, debug_mac0, debug_mac1, debug_tx_dsp, debug_txc, + debug_serdes0, debug_serdes1, debug_serdes2, debug_rx_dsp; + + wire [15:0] ser_rx_occ, ser_tx_occ, dsp_rx_occ, dsp_tx_occ, eth_rx_occ, eth_tx_occ, eth_rx_occ2; + wire ser_rx_full, ser_tx_full, dsp_rx_full, dsp_tx_full, eth_rx_full, eth_tx_full, eth_rx_full2; + wire ser_rx_empty, ser_tx_empty, dsp_rx_empty, dsp_tx_empty, eth_rx_empty, eth_tx_empty, eth_rx_empty2; + + wire serdes_link_up; + wire epoch; + + // /////////////////////////////////////////////////////////////////////////////////////////////// + // Wishbone Single Master INTERCON + localparam dw = 32; // Data bus width + localparam aw = 16; // Address bus width, for byte addressibility, 16 = 64K byte memory space + localparam sw = 4; // Select width -- 32-bit data bus with 8-bit granularity. + + wire [dw-1:0] m0_dat_o, m0_dat_i; + wire [dw-1:0] s0_dat_o, s1_dat_o, s0_dat_i, s1_dat_i, s2_dat_o, s3_dat_o, s2_dat_i, s3_dat_i, + s4_dat_o, s5_dat_o, s4_dat_i, s5_dat_i, s6_dat_o, s7_dat_o, s6_dat_i, s7_dat_i, + s8_dat_o, s9_dat_o, s8_dat_i, s9_dat_i, s10_dat_o, s10_dat_i, s11_dat_i, s11_dat_o, + s12_dat_i, s12_dat_o, s13_dat_i, s13_dat_o, s14_dat_i, s14_dat_o; + wire [aw-1:0] m0_adr,s0_adr,s1_adr,s2_adr,s3_adr,s4_adr,s5_adr,s6_adr,s7_adr,s8_adr,s9_adr,s10_adr,s11_adr,s12_adr, s13_adr, s14_adr; + wire [sw-1:0] m0_sel,s0_sel,s1_sel,s2_sel,s3_sel,s4_sel,s5_sel,s6_sel,s7_sel,s8_sel,s9_sel,s10_sel,s11_sel,s12_sel, s13_sel, s14_sel; + wire m0_ack,s0_ack,s1_ack,s2_ack,s3_ack,s4_ack,s5_ack,s6_ack,s7_ack,s8_ack,s9_ack,s10_ack,s11_ack,s12_ack, s13_ack, s14_ack; + wire m0_stb,s0_stb,s1_stb,s2_stb,s3_stb,s4_stb,s5_stb,s6_stb,s7_stb,s8_stb,s9_stb,s10_stb,s11_stb,s12_stb, s13_stb, s14_stb; + wire m0_cyc,s0_cyc,s1_cyc,s2_cyc,s3_cyc,s4_cyc,s5_cyc,s6_cyc,s7_cyc,s8_cyc,s9_cyc,s10_cyc,s11_cyc,s12_cyc, s13_cyc, s14_cyc; + wire m0_err,s0_err,s1_err,s2_err,s3_err,s4_err,s5_err,s6_err,s7_err,s8_err,s9_err,s10_err,s11_err,s12_err, s13_err, s14_err; + wire m0_rty,s0_rty,s1_rty,s2_rty,s3_rty,s4_rty,s5_rty,s6_rty,s7_rty,s8_rty,s9_rty,s10_rty,s11_rty,s12_rty, s13_rty, s14_rty; + wire m0_we,s0_we,s1_we,s2_we,s3_we,s4_we,s5_we,s6_we,s7_we,s8_we,s9_we,s10_we,s11_we,s12_we,s13_we, s14_we; + + wb_1master #(.s0_addr_w(1),.s0_addr(1'b0),.s1_addr_w(2),.s1_addr(2'b10), + .s215_addr_w(6),.s2_addr(6'b1100_00),.s3_addr(6'b1100_01),.s4_addr(6'b1100_10), + .s5_addr(6'b1100_11),.s6_addr(6'b1101_00),.s7_addr(6'b1101_01),.s8_addr(6'b1101_10), + .s9_addr(6'b1101_11),.s10_addr(6'b1110_00),.s11_addr(6'b1110_01),.s12_addr(6'b1110_10), + .s13_addr(6'b1110_11),.s14_addr(6'b1111_00),.s15_addr(6'b1111_01), + .dw(dw),.aw(aw),.sw(sw)) wb_1master + (.clk_i(wb_clk),.rst_i(wb_rst), + .m0_dat_o(m0_dat_o),.m0_ack_o(m0_ack),.m0_err_o(m0_err),.m0_rty_o(m0_rty),.m0_dat_i(m0_dat_i), + .m0_adr_i(m0_adr),.m0_sel_i(m0_sel),.m0_we_i(m0_we),.m0_cyc_i(m0_cyc),.m0_stb_i(m0_stb), + .s0_dat_o(s0_dat_o),.s0_adr_o(s0_adr),.s0_sel_o(s0_sel),.s0_we_o (s0_we),.s0_cyc_o(s0_cyc),.s0_stb_o(s0_stb), + .s0_dat_i(s0_dat_i),.s0_ack_i(s0_ack),.s0_err_i(s0_err),.s0_rty_i(s0_rty), + .s1_dat_o(s1_dat_o),.s1_adr_o(s1_adr),.s1_sel_o(s1_sel),.s1_we_o (s1_we),.s1_cyc_o(s1_cyc),.s1_stb_o(s1_stb), + .s1_dat_i(s1_dat_i),.s1_ack_i(s1_ack),.s1_err_i(s1_err),.s1_rty_i(s1_rty), + .s2_dat_o(s2_dat_o),.s2_adr_o(s2_adr),.s2_sel_o(s2_sel),.s2_we_o (s2_we),.s2_cyc_o(s2_cyc),.s2_stb_o(s2_stb), + .s2_dat_i(s2_dat_i),.s2_ack_i(s2_ack),.s2_err_i(s2_err),.s2_rty_i(s2_rty), + .s3_dat_o(s3_dat_o),.s3_adr_o(s3_adr),.s3_sel_o(s3_sel),.s3_we_o (s3_we),.s3_cyc_o(s3_cyc),.s3_stb_o(s3_stb), + .s3_dat_i(s3_dat_i),.s3_ack_i(s3_ack),.s3_err_i(s3_err),.s3_rty_i(s3_rty), + .s4_dat_o(s4_dat_o),.s4_adr_o(s4_adr),.s4_sel_o(s4_sel),.s4_we_o (s4_we),.s4_cyc_o(s4_cyc),.s4_stb_o(s4_stb), + .s4_dat_i(s4_dat_i),.s4_ack_i(s4_ack),.s4_err_i(s4_err),.s4_rty_i(s4_rty), + .s5_dat_o(s5_dat_o),.s5_adr_o(s5_adr),.s5_sel_o(s5_sel),.s5_we_o (s5_we),.s5_cyc_o(s5_cyc),.s5_stb_o(s5_stb), + .s5_dat_i(s5_dat_i),.s5_ack_i(s5_ack),.s5_err_i(s5_err),.s5_rty_i(s5_rty), + .s6_dat_o(s6_dat_o),.s6_adr_o(s6_adr),.s6_sel_o(s6_sel),.s6_we_o (s6_we),.s6_cyc_o(s6_cyc),.s6_stb_o(s6_stb), + .s6_dat_i(s6_dat_i),.s6_ack_i(s6_ack),.s6_err_i(s6_err),.s6_rty_i(s6_rty), + .s7_dat_o(s7_dat_o),.s7_adr_o(s7_adr),.s7_sel_o(s7_sel),.s7_we_o (s7_we),.s7_cyc_o(s7_cyc),.s7_stb_o(s7_stb), + .s7_dat_i(s7_dat_i),.s7_ack_i(s7_ack),.s7_err_i(s7_err),.s7_rty_i(s7_rty), + .s8_dat_o(s8_dat_o),.s8_adr_o(s8_adr),.s8_sel_o(s8_sel),.s8_we_o (s8_we),.s8_cyc_o(s8_cyc),.s8_stb_o(s8_stb), + .s8_dat_i(s8_dat_i),.s8_ack_i(s8_ack),.s8_err_i(s8_err),.s8_rty_i(s8_rty), + .s9_dat_o(s9_dat_o),.s9_adr_o(s9_adr),.s9_sel_o(s9_sel),.s9_we_o (s9_we),.s9_cyc_o(s9_cyc),.s9_stb_o(s9_stb), + .s9_dat_i(s9_dat_i),.s9_ack_i(s9_ack),.s9_err_i(s9_err),.s9_rty_i(s9_rty), + .s10_dat_o(s10_dat_o),.s10_adr_o(s10_adr),.s10_sel_o(s10_sel),.s10_we_o(s10_we),.s10_cyc_o(s10_cyc),.s10_stb_o(s10_stb), + .s10_dat_i(s10_dat_i),.s10_ack_i(s10_ack),.s10_err_i(s10_err),.s10_rty_i(s10_rty), + .s11_dat_o(s11_dat_o),.s11_adr_o(s11_adr),.s11_sel_o(s11_sel),.s11_we_o(s11_we),.s11_cyc_o(s11_cyc),.s11_stb_o(s11_stb), + .s11_dat_i(s11_dat_i),.s11_ack_i(s11_ack),.s11_err_i(s11_err),.s11_rty_i(s11_rty), + .s12_dat_o(s12_dat_o),.s12_adr_o(s12_adr),.s12_sel_o(s12_sel),.s12_we_o(s12_we),.s12_cyc_o(s12_cyc),.s12_stb_o(s12_stb), + .s12_dat_i(s12_dat_i),.s12_ack_i(s12_ack),.s12_err_i(s12_err),.s12_rty_i(s12_rty), + .s13_dat_o(s13_dat_o),.s13_adr_o(s13_adr),.s13_sel_o(s13_sel),.s13_we_o(s13_we),.s13_cyc_o(s13_cyc),.s13_stb_o(s13_stb), + .s13_dat_i(s13_dat_i),.s13_ack_i(s13_ack),.s13_err_i(s13_err),.s13_rty_i(s13_rty), + .s14_dat_o(s14_dat_o),.s14_adr_o(s14_adr),.s14_sel_o(s14_sel),.s14_we_o(s14_we),.s14_cyc_o(s14_cyc),.s14_stb_o(s14_stb), + .s14_dat_i(s14_dat_i),.s14_ack_i(s14_ack),.s14_err_i(s14_err),.s14_rty_i(s14_rty), + .s15_dat_i(0),.s15_ack_i(0),.s15_err_i(0),.s15_rty_i(0) ); + + ////////////////////////////////////////////////////////////////////////////////////////// + // Reset Controller + system_control sysctrl (.wb_clk_i(wb_clk), // .por_i(por), + .ram_loader_rst_o(ram_loader_rst), + .wb_rst_o(wb_rst), + .ram_loader_done_i(ram_loader_done)); + + assign config_success = ram_loader_done; + reg takeover = 0; + + wire cpld_start_int, cpld_mode_int, cpld_done_int; + + always @(posedge wb_clk) + if(ram_loader_done) + takeover = 1; + assign cpld_misc = ~takeover; + + wire sd_clk, sd_csn, sd_mosi, sd_miso; + + assign sd_miso = cpld_din; + assign cpld_start = takeover ? sd_clk : cpld_start_int; + assign cpld_mode = takeover ? sd_csn : cpld_mode_int; + assign cpld_done = takeover ? sd_mosi : cpld_done_int; + + // /////////////////////////////////////////////////////////////////// + // RAM Loader + + wire [31:0] ram_loader_dat, iwb_dat; + wire [15:0] ram_loader_adr, iwb_adr; + wire [3:0] ram_loader_sel; + wire ram_loader_stb, ram_loader_we, ram_loader_ack; + wire iwb_ack, iwb_stb; + ram_loader #(.AWIDTH(16),.RAM_SIZE(RAM_SIZE)) + ram_loader (.clk_i(wb_clk),.rst_i(ram_loader_rst), + // CPLD Interface + .cfg_clk_i(cpld_clk), + .cfg_data_i(cpld_din), + .start_o(cpld_start_int), + .mode_o(cpld_mode_int), + .done_o(cpld_done_int), + .detached_i(cpld_detached), + // Wishbone Interface + .wb_dat_o(ram_loader_dat),.wb_adr_o(ram_loader_adr), + .wb_stb_o(ram_loader_stb),.wb_cyc_o(),.wb_sel_o(ram_loader_sel), + .wb_we_o(ram_loader_we),.wb_ack_i(ram_loader_ack), + .ram_loader_done_o(ram_loader_done)); + + // Processor + aeMB_core_BE #(.ISIZ(16),.DSIZ(16),.MUL(0),.BSF(1)) + aeMB (.sys_clk_i(wb_clk), .sys_rst_i(wb_rst), + // Instruction Wishbone bus to I-RAM + .iwb_stb_o(iwb_stb),.iwb_adr_o(iwb_adr), + .iwb_dat_i(iwb_dat),.iwb_ack_i(iwb_ack), + // Data Wishbone bus to system bus fabric + .dwb_we_o(m0_we),.dwb_stb_o(m0_stb),.dwb_dat_o(m0_dat_i),.dwb_adr_o(m0_adr), + .dwb_dat_i(m0_dat_o),.dwb_ack_i(m0_ack),.dwb_sel_o(m0_sel),.dwb_cyc_o(m0_cyc), + // Interrupts and exceptions + .sys_int_i(proc_int),.sys_exc_i(bus_error) ); + + assign bus_error = m0_err | m0_rty; + + // Dual Ported RAM -- D-Port is Slave #0 on main Wishbone + // I-port connects directly to processor and ram loader + + wire flush_icache; + ram_harv_cache #(.AWIDTH(15),.RAM_SIZE(RAM_SIZE),.ICWIDTH(7),.DCWIDTH(6)) + sys_ram(.wb_clk_i(wb_clk),.wb_rst_i(wb_rst), + + .ram_loader_adr_i(ram_loader_adr[14:0]), .ram_loader_dat_i(ram_loader_dat), + .ram_loader_stb_i(ram_loader_stb), .ram_loader_sel_i(ram_loader_sel), + .ram_loader_we_i(ram_loader_we), .ram_loader_ack_o(ram_loader_ack), + .ram_loader_done_i(ram_loader_done), + + .iwb_adr_i(iwb_adr[14:0]), .iwb_stb_i(iwb_stb), + .iwb_dat_o(iwb_dat), .iwb_ack_o(iwb_ack), + + .dwb_adr_i(s0_adr[14:0]), .dwb_dat_i(s0_dat_o), .dwb_dat_o(s0_dat_i), + .dwb_we_i(s0_we), .dwb_ack_o(s0_ack), .dwb_stb_i(s0_stb), .dwb_sel_i(s0_sel), + .flush_icache(flush_icache)); + + assign s0_err = 1'b0; + assign s0_rty = 1'b0; + + setting_reg #(.my_addr(7)) sr_icache (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(),.changed(flush_icache)); + + // Buffer Pool, slave #1 + wire rd0_read, rd0_sop, rd0_error, rd0_done, rd0_eop; + wire rd1_read, rd1_sop, rd1_error, rd1_done, rd1_eop; + wire rd2_read, rd2_sop, rd2_error, rd2_done, rd2_eop; + wire rd3_read, rd3_sop, rd3_error, rd3_done, rd3_eop; + wire [31:0] rd0_dat, rd1_dat, rd2_dat, rd3_dat; + + wire wr0_write, wr0_done, wr0_error, wr0_ready, wr0_full; + wire wr1_write, wr1_done, wr1_error, wr1_ready, wr1_full; + wire wr2_write, wr2_done, wr2_error, wr2_ready, wr2_full; + wire wr3_write, wr3_done, wr3_error, wr3_ready, wr3_full; + wire [31:0] wr0_dat, wr1_dat, wr2_dat, wr3_dat; + + buffer_pool buffer_pool + (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst), + .wb_we_i(s1_we),.wb_stb_i(s1_stb),.wb_adr_i(s1_adr),.wb_dat_i(s1_dat_o), + .wb_dat_o(s1_dat_i),.wb_ack_o(s1_ack),.wb_err_o(s1_err),.wb_rty_o(s1_rty), + + .stream_clk(dsp_clk), .stream_rst(dsp_rst), + .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), + .status(status),.sys_int_o(buffer_int), + + .s0(status_b0),.s1(status_b1),.s2(status_b2),.s3(status_b3), + .s4(status_b4),.s5(status_b5),.s6(status_b6),.s7(status_b7), + + // Write Interfaces + .wr0_dat_i(wr0_dat), .wr0_write_i(wr0_write), .wr0_done_i(wr0_done), + .wr0_error_i(wr0_error), .wr0_ready_o(wr0_ready), .wr0_full_o(wr0_full), + .wr1_dat_i(wr1_dat), .wr1_write_i(wr1_write), .wr1_done_i(wr1_done), + .wr1_error_i(wr1_error), .wr1_ready_o(wr1_ready), .wr1_full_o(wr1_full), + .wr2_dat_i(wr2_dat), .wr2_write_i(wr2_write), .wr2_done_i(wr2_done), + .wr2_error_i(wr2_error), .wr2_ready_o(wr2_ready), .wr2_full_o(wr2_full), + .wr3_dat_i(wr3_dat), .wr3_write_i(wr3_write), .wr3_done_i(wr3_done), + .wr3_error_i(wr3_error), .wr3_ready_o(wr3_ready), .wr3_full_o(wr3_full), + // Read Interfaces + .rd0_dat_o(rd0_dat), .rd0_read_i(rd0_read), .rd0_done_i(rd0_done), + .rd0_error_i(rd0_error), .rd0_sop_o(rd0_sop), .rd0_eop_o(rd0_eop), + .rd1_dat_o(rd1_dat), .rd1_read_i(rd1_read), .rd1_done_i(rd1_done), + .rd1_error_i(rd1_error), .rd1_sop_o(rd1_sop), .rd1_eop_o(rd1_eop), + .rd2_dat_o(rd2_dat), .rd2_read_i(rd2_read), .rd2_done_i(rd2_done), + .rd2_error_i(rd2_error), .rd2_sop_o(rd2_sop), .rd2_eop_o(rd2_eop), + .rd3_dat_o(rd3_dat), .rd3_read_i(rd3_read), .rd3_done_i(rd3_done), + .rd3_error_i(rd3_error), .rd3_sop_o(rd3_sop), .rd3_eop_o(rd3_eop) + ); + + // SPI -- Slave #2 + spi_top shared_spi + (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.wb_adr_i(s2_adr[4:0]),.wb_dat_i(s2_dat_o), + .wb_dat_o(s2_dat_i),.wb_sel_i(s2_sel),.wb_we_i(s2_we),.wb_stb_i(s2_stb), + .wb_cyc_i(s2_cyc),.wb_ack_o(s2_ack),.wb_err_o(s2_err),.wb_int_o(spi_int), + .ss_pad_o({sen_tx_db,sen_tx_adc,sen_tx_dac,sen_rx_db,sen_rx_adc,sen_rx_dac,sen_dac,sen_clk}), + .sclk_pad_o(sclk),.mosi_pad_o(mosi),.miso_pad_i(miso) ); + + assign s2_rty = 1'b0; + + // I2C -- Slave #3 + i2c_master_top #(.ARST_LVL(1)) + i2c (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.arst_i(1'b0), + .wb_adr_i(s3_adr[4:2]),.wb_dat_i(s3_dat_o[7:0]),.wb_dat_o(s3_dat_i[7:0]), + .wb_we_i(s3_we),.wb_stb_i(s3_stb),.wb_cyc_i(s3_cyc), + .wb_ack_o(s3_ack),.wb_inta_o(i2c_int), + .scl_pad_i(scl_pad_i),.scl_pad_o(scl_pad_o),.scl_padoen_o(scl_pad_oen_o), + .sda_pad_i(sda_pad_i),.sda_pad_o(sda_pad_o),.sda_padoen_o(sda_pad_oen_o) ); + + assign s3_dat_i[31:8] = 24'd0; + assign s3_err = 1'b0; + assign s3_rty = 1'b0; + + // GPIOs -- Slave #4 + nsgpio nsgpio(.clk_i(wb_clk),.rst_i(wb_rst), + .cyc_i(s4_cyc),.stb_i(s4_stb),.adr_i(s4_adr[3:0]),.we_i(s4_we), + .dat_i(s4_dat_o),.dat_o(s4_dat_i),.ack_o(s4_ack), + .atr(atr_lines),.debug_0(debug_gpio_0),.debug_1(debug_gpio_1), + .gpio( {io_tx,io_rx} ) ); + assign s4_err = 1'b0; + assign s4_rty = 1'b0; + + // Buffer Pool Status -- Slave #5 + wb_readback_mux buff_pool_status + (.wb_clk_i(wb_clk), + .wb_rst_i(wb_rst), + .wb_stb_i(s5_stb), + .wb_adr_i(s5_adr), + .wb_dat_o(s5_dat_i), + .wb_ack_o(s5_ack), + + .word00(status_b0),.word01(status_b1),.word02(status_b2),.word03(status_b3), + .word04(status_b4),.word05(status_b5),.word06(status_b6),.word07(status_b7), + .word08(status),.word09({sim_mode,27'b0,clock_divider[3:0]}),.word10(32'b0), + .word11(32'b0),.word12(32'b0),.word13(32'b0),.word14(32'b0),.word15(32'b0) + ); + + assign s5_err = 1'b0; + assign s5_rty = 1'b0; + + // Slave, #6 Ethernet MAC, see below + + // Settings Bus -- Slave #7 + settings_bus settings_bus + (.wb_clk(wb_clk),.wb_rst(wb_rst),.wb_adr_i(s7_adr),.wb_dat_i(s7_dat_o), + .wb_stb_i(s7_stb),.wb_we_i(s7_we),.wb_ack_o(s7_ack), + .sys_clk(dsp_clk),.strobe(set_stb),.addr(set_addr),.data(set_data)); + + assign s7_err = 1'b0; + assign s7_rty = 1'b0; + assign s7_dat_i = 32'd0; + + // Output control lines + wire [7:0] clock_outs, serdes_outs, adc_outs; + assign {clock_ready, clk_en[1:0], clk_sel[1:0]} = clock_outs[4:0]; + assign {ser_enable, ser_prbsen, ser_loopen, ser_rx_en} = serdes_outs[3:0]; + assign {adc_oe_a, adc_on_a, adc_oe_b, adc_on_b } = adc_outs[3:0]; + + wire phy_reset; + assign PHY_RESETn = ~phy_reset; + + setting_reg #(.my_addr(0)) sr_clk (.clk(wb_clk),.rst(wb_rst),.strobe(s7_ack),.addr(set_addr), + .in(set_data),.out(clock_outs),.changed()); + setting_reg #(.my_addr(1)) sr_ser (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(serdes_outs),.changed()); + setting_reg #(.my_addr(2)) sr_adc (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(adc_outs),.changed()); + setting_reg #(.my_addr(4)) sr_phy (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(phy_reset),.changed()); + + // ///////////////////////////////////////////////////////////////////////// + // LEDS + // register 8 determines whether leds are controlled by SW or not + // 1 = controlled by HW, 0 = by SW + // In Rev3 there are only 6 leds, and the highest one is on the ETH connector + + wire [7:0] led_src, led_sw; + wire [7:0] led_hw = {clk_status,serdes_link_up}; + + setting_reg #(.my_addr(3)) sr_led (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(led_sw),.changed()); + setting_reg #(.my_addr(8)) sr_led_src (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(led_src),.changed()); + + assign leds = (led_src & led_hw) | (~led_src & led_sw); + + // ///////////////////////////////////////////////////////////////////////// + // Ethernet MAC Slave #6 + + wire Tx_mac_wa, Tx_mac_wr, Tx_mac_sop, Tx_mac_eop; + wire Rx_mac_empty, Rx_mac_rd, Rx_mac_sop, Rx_mac_eop, Rx_mac_err; + wire [31:0] Tx_mac_data, Rx_mac_data; + wire [1:0] Tx_mac_BE, Rx_mac_BE; + wire rst_mac; + + oneshot_2clk mac_rst_1shot (.clk_in(wb_clk),.in(wb_rst),.clk_out(clk_to_mac),.out(rst_mac)); + + MAC_top #(.TX_FF_DEPTH(9), .RX_FF_DEPTH(11)) + MAC_top + (.Clk_125M(clk_to_mac),.Clk_user(dsp_clk), + .rst_mac(rst_mac),.rst_user(dsp_rst), + .RST_I(wb_rst),.CLK_I(wb_clk),.STB_I(s6_stb),.CYC_I(s6_cyc),.ADR_I(s6_adr[8:2]), + .WE_I(s6_we),.DAT_I(s6_dat_o),.DAT_O(s6_dat_i),.ACK_O(s6_ack), + .Rx_mac_empty(Rx_mac_empty),.Rx_mac_rd(Rx_mac_rd),.Rx_mac_data(Rx_mac_data),.Rx_mac_BE(Rx_mac_BE), + .Rx_mac_sop(Rx_mac_sop),.Rx_mac_eop(Rx_mac_eop),.Rx_mac_err(Rx_mac_err), + .Tx_mac_wa(Tx_mac_wa),.Tx_mac_wr(Tx_mac_wr),.Tx_mac_data(Tx_mac_data), + .Tx_mac_BE(Tx_mac_BE),.Tx_mac_sop(Tx_mac_sop),.Tx_mac_eop(Tx_mac_eop), + .Gtx_clk(GMII_GTX_CLK),.Tx_clk(GMII_TX_CLK),.Tx_er(GMII_TX_ER),.Tx_en(GMII_TX_EN),.Txd(GMII_TXD), + .Rx_clk(GMII_RX_CLK),.Rx_er(GMII_RX_ER),.Rx_dv(GMII_RX_DV),.Rxd(GMII_RXD), + .Crs(GMII_CRS),.Col(GMII_COL), + .Mdio(MDIO),.Mdc(MDC), + .rx_fifo_occupied(eth_rx_occ2),.rx_fifo_full(eth_rx_full2),.rx_fifo_empty(eth_rx_empty2), + .tx_fifo_occupied(),.tx_fifo_full(),.tx_fifo_empty(), + .debug0(debug_mac0),.debug1(debug_mac1) ); + + assign s6_err = 1'b0; + assign s6_rty = 1'b0; + + mac_rxfifo_int mac_rxfifo_int + (.clk(dsp_clk),.rst(dsp_rst), + .Rx_mac_empty(Rx_mac_empty),.Rx_mac_rd(Rx_mac_rd),.Rx_mac_data(Rx_mac_data), + .Rx_mac_BE(Rx_mac_BE),.Rx_mac_sop(Rx_mac_sop), + .Rx_mac_eop(Rx_mac_eop),.Rx_mac_err(Rx_mac_err), + .wr_dat_o(wr2_dat),.wr_write_o(wr2_write),.wr_done_o(wr2_done), + .wr_error_o(wr2_error),.wr_ready_i(wr2_ready),.wr_full_i(wr2_full), + .fifo_occupied(eth_rx_occ),.fifo_full(eth_rx_full),.fifo_empty(eth_rx_empty) ); + + mac_txfifo_int mac_txfifo_int + (.clk(dsp_clk),.rst(dsp_rst),.mac_clk(clk_to_mac), + .Tx_mac_wa(Tx_mac_wa),.Tx_mac_wr(Tx_mac_wr),.Tx_mac_data(Tx_mac_data), + .Tx_mac_BE(Tx_mac_BE),.Tx_mac_sop(Tx_mac_sop),.Tx_mac_eop(Tx_mac_eop), + .rd_dat_i(rd2_dat),.rd_read_o(rd2_read),.rd_done_o(rd2_done), + .rd_error_o(rd2_error),.rd_sop_i(rd2_sop),.rd_eop_i(rd2_eop), + .fifo_occupied(eth_tx_occ),.fifo_full(eth_tx_full),.fifo_empty(eth_tx_empty) ); + + // ///////////////////////////////////////////////////////////////////////// + // Interrupt Controller, Slave #8 + + wire [15:0] irq={{4'b0, clk_status, serdes_link_up, uart_tx_int, uart_rx_int}, + {pps_int,overrun,underrun,PHY_INTn,i2c_int,spi_int,timer_int,buffer_int}}; + + simple_pic #(.is(16),.dwidth(32)) simple_pic + (.clk_i(wb_clk),.rst_i(wb_rst),.cyc_i(s8_cyc),.stb_i(s8_stb),.adr_i(s8_adr[3:2]), + .we_i(s8_we),.dat_i(s8_dat_o),.dat_o(s8_dat_i),.ack_o(s8_ack),.int_o(proc_int), + .irq(irq) ); + assign s8_err = 0; + assign s8_rty = 0; + + // ///////////////////////////////////////////////////////////////////////// + // Master Timer, Slave #9 + + wire [31:0] master_time; + timer timer + (.wb_clk_i(wb_clk),.rst_i(wb_rst), + .cyc_i(s9_cyc),.stb_i(s9_stb),.adr_i(s9_adr[4:2]), + .we_i(s9_we),.dat_i(s9_dat_o),.dat_o(s9_dat_i),.ack_o(s9_ack), + .sys_clk_i(dsp_clk),.master_time_i(master_time),.int_o(timer_int) ); + assign s9_err = 0; + assign s9_rty = 0; + + // ///////////////////////////////////////////////////////////////////////// + // UART, Slave #10 + + simple_uart #(.TXDEPTH(3),.RXDEPTH(3)) uart // depth of 3 is 128 entries + (.clk_i(wb_clk),.rst_i(wb_rst), + .we_i(s10_we),.stb_i(s10_stb),.cyc_i(s10_cyc),.ack_o(s10_ack), + .adr_i(s10_adr[4:2]),.dat_i(s10_dat_o),.dat_o(s10_dat_i), + .rx_int_o(uart_rx_int),.tx_int_o(uart_tx_int), + .tx_o(uart_tx_o),.rx_i(uart_rx_i),.baud_o(uart_baud_o)); + + assign s10_err = 0; + assign s10_rty = 0; + + // ///////////////////////////////////////////////////////////////////////// + // ATR Controller, Slave #11 + + wire run_rx, run_tx; + reg run_rx_d1; + always @(posedge dsp_clk) + run_rx_d1 <= run_rx; + + atr_controller atr_controller + (.clk_i(wb_clk),.rst_i(wb_rst), + .adr_i(s11_adr[5:0]),.sel_i(s11_sel),.dat_i(s11_dat_o),.dat_o(s11_dat_i), + .we_i(s11_we),.stb_i(s11_stb),.cyc_i(s11_cyc),.ack_o(s11_ack), + .run_rx(run_rx_d1),.run_tx(run_tx),.ctrl_lines(atr_lines) ); + assign s11_err = 0; + assign s11_rty = 0; + + // ////////////////////////////////////////////////////////////////////////// + // Time Sync, Slave #12 + + reg pps_posedge, pps_negedge, pps_pos_d1, pps_neg_d1; + always @(negedge dsp_clk) pps_negedge <= pps_in; + always @(posedge dsp_clk) pps_posedge <= pps_in; + always @(posedge dsp_clk) pps_pos_d1 <= pps_posedge; + always @(posedge dsp_clk) pps_neg_d1 <= pps_negedge; + + wire pps_o; + time_sync time_sync + (.wb_clk_i(wb_clk),.rst_i(wb_rst), + .cyc_i(s12_cyc),.stb_i(s12_stb),.adr_i(s12_adr[4:2]), + .we_i(s12_we),.dat_i(s12_dat_o),.dat_o(s12_dat_i),.ack_o(s12_ack), + .sys_clk_i(dsp_clk),.master_time_o(master_time), + .pps_posedge(pps_posedge),.pps_negedge(pps_negedge), + .exp_pps_in(exp_pps_in),.exp_pps_out(exp_pps_out), + .int_o(pps_int),.epoch_o(epoch),.pps_o(pps_o) ); + assign s12_err = 0; + assign s12_rty = 0; + + // ///////////////////////////////////////////////////////////////////////// + // SD Card Reader / Writer, Slave #13 + + sd_spi_wb sd_spi_wb + (.clk(wb_clk),.rst(wb_rst), + .sd_clk(sd_clk),.sd_csn(sd_csn),.sd_mosi(sd_mosi),.sd_miso(sd_miso), + .wb_cyc_i(s13_cyc),.wb_stb_i(s13_stb),.wb_we_i(s13_we), + .wb_adr_i(s13_adr[3:2]),.wb_dat_i(s13_dat_o),.wb_dat_o(s13_dat_i), + .wb_ack_o(s13_ack) ); + assign s13_err = 0; + assign s13_rty = 0; + // ///////////////////////////////////////////////////////////////////////// + // DSP + wire [31:0] sample_rx, sample_tx; + wire strobe_rx, strobe_tx; + + rx_control #(.FIFOSIZE(10)) rx_control + (.clk(dsp_clk), .rst(dsp_rst), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .master_time(master_time),.overrun(overrun), + .wr_dat_o(wr1_dat), .wr_write_o(wr1_write), .wr_done_o(wr1_done), .wr_error_o(wr1_error), + .wr_ready_i(wr1_ready), .wr_full_i(wr1_full), + .sample(sample_rx), .run(run_rx), .strobe(strobe_rx), + .fifo_occupied(dsp_rx_occ),.fifo_full(dsp_rx_full),.fifo_empty(dsp_rx_empty), + .debug_rx(debug_rx) ); + + // dummy_rx dsp_core_rx + dsp_core_rx dsp_core_rx + (.clk(dsp_clk),.rst(dsp_rst), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .adc_a(adc_a),.adc_ovf_a(adc_ovf_a),.adc_b(adc_b),.adc_ovf_b(adc_ovf_b), + .io_rx(io_rx),.sample(sample_rx), .run(run_rx_d1), .strobe(strobe_rx), + .debug(debug_rx_dsp) ); + + tx_control #(.FIFOSIZE(10)) tx_control + (.clk(dsp_clk), .rst(dsp_rst), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .master_time(master_time),.underrun(underrun), + .rd_dat_i(rd1_dat), .rd_sop_i(rd1_sop), .rd_eop_i(rd1_eop), + .rd_read_o(rd1_read), .rd_done_o(rd1_done), .rd_error_o(rd1_error), + .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), + .fifo_occupied(dsp_tx_occ),.fifo_full(dsp_tx_full),.fifo_empty(dsp_tx_empty), + .debug(debug_txc) ); + + dsp_core_tx dsp_core_tx + (.clk(dsp_clk),.rst(dsp_rst), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .dac_a(dac_a),.dac_b(dac_b), + .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), .debug(debug_tx_dsp) ); + + assign dsp_rst = wb_rst; + + // /////////////////////////////////////////////////////////////////////////////////// + // SERDES + + serdes #(.TXFIFOSIZE(9),.RXFIFOSIZE(9)) serdes + (.clk(dsp_clk),.rst(dsp_rst), + .ser_tx_clk(ser_tx_clk),.ser_t(ser_t),.ser_tklsb(ser_tklsb),.ser_tkmsb(ser_tkmsb), + .rd_dat_i(rd0_dat),.rd_read_o(rd0_read),.rd_done_o(rd0_done),.rd_error_o(rd0_error), + .rd_sop_i(rd0_sop),.rd_eop_i(rd0_eop), + .ser_rx_clk(ser_rx_clk),.ser_r(ser_r),.ser_rklsb(ser_rklsb),.ser_rkmsb(ser_rkmsb), + .wr_dat_o(wr0_dat),.wr_write_o(wr0_write),.wr_done_o(wr0_done),.wr_error_o(wr0_error), + .wr_ready_i(wr0_ready),.wr_full_i(wr0_full), + .tx_occupied(ser_tx_occ),.tx_full(ser_tx_full),.tx_empty(ser_tx_empty), + .rx_occupied(ser_rx_occ),.rx_full(ser_rx_full),.rx_empty(ser_rx_empty), + .serdes_link_up(serdes_link_up),.debug0(debug_serdes0), .debug1(debug_serdes1) ); + +`ifdef EXTRAM + // /////////////////////////////////////////////////////////////////////////////////// + // External RAM Interface + + localparam PAGE_SIZE = 10; // PAGE SIZE is in bytes, 10 = 1024 bytes + + wire [15:0] bus2ram, ram2bus; + wire [15:0] bridge_adr; + wire [1:0] bridge_sel; + wire bridge_stb, bridge_cyc, bridge_we, bridge_ack; + + wire [19:0] page; + wire [19:0] wb_ram_adr = {page[19:PAGE_SIZE],bridge_adr[PAGE_SIZE-1:0]}; + setting_reg #(.my_addr(6)) sr_page (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(page),.changed()); + + wb_bridge_16_32 bridge + (.wb_clk(wb_clk),.wb_rst(wb_rst), + .A_cyc_i(s14_cyc),.A_stb_i(s14_stb),.A_we_i(s14_we),.A_sel_i(s14_sel), + .A_adr_i(s14_adr),.A_dat_i(s14_dat_o),.A_dat_o(s14_dat_i),.A_ack_o(s14_ack), + .B_cyc_o(bridge_cyc),.B_stb_o(bridge_stb),.B_we_o(bridge_we),.B_sel_o(bridge_sel), + .B_adr_o(bridge_adr),.B_dat_o(bus2ram),.B_dat_i(ram2bus),.B_ack_i(bridge_ack)); + + wb_zbt16_b wb_zbt16_b + (.clk(wb_clk),.rst(wb_rst), + .wb_adr_i(wb_ram_adr),.wb_dat_i(bus2ram),.wb_dat_o(ram2bus),.wb_sel_i(bridge_sel), + .wb_cyc_i(bridge_cyc),.wb_stb_i(bridge_stb),.wb_ack_o(bridge_ack),.wb_we_i(bridge_we), + .sram_clk(RAM_CLK),.sram_a(RAM_A),.sram_d(RAM_D[15:0]),.sram_we(RAM_WEn), + .sram_bw(),.sram_adv(RAM_LDn),.sram_ce(RAM_CENn),.sram_oe(RAM_OEn), + .sram_mode(),.sram_zz() ); + + assign s14_err = 0; assign s14_rty = 0; + assign RAM_CE1n = 0; + assign RAM_D[17:16] = 2'bzz; +`endif + +`ifdef DEBUG + // ///////////////////////////////////////////////////////////////////////////////////////// + // Debug Pins + + // FIFO Level Debugging + reg [31:0] host_to_dsp_fifo,dsp_to_host_fifo,eth_mac_debug,serdes_to_dsp_fifo,dsp_to_serdes_fifo; + + always @(posedge dsp_clk) + serdes_to_dsp_fifo <= { {ser_rx_full,ser_rx_empty,ser_rx_occ[13:0]}, + {dsp_tx_full,dsp_tx_empty,dsp_tx_occ[13:0]} }; + + always @(posedge dsp_clk) + dsp_to_serdes_fifo <= { {ser_tx_full,ser_tx_empty,ser_tx_occ[13:0]}, + {dsp_rx_full,dsp_rx_empty,dsp_rx_occ[13:0]} }; + + always @(posedge dsp_clk) + host_to_dsp_fifo <= { {eth_rx_full,eth_rx_empty,eth_rx_occ[13:0]}, + {dsp_tx_full,dsp_tx_empty,dsp_tx_occ[13:0]} }; + + always @(posedge dsp_clk) + dsp_to_host_fifo <= { {eth_tx_full,eth_tx_empty,eth_tx_occ[13:0]}, + {dsp_rx_full,dsp_rx_empty,dsp_rx_occ[13:0]} }; + + always @(posedge dsp_clk) + eth_mac_debug <= { { 6'd0, GMII_TX_EN, GMII_RX_DV, debug_mac0[7:0]}, + {eth_rx_full2, eth_rx_empty2, eth_rx_occ2[13:0]} }; + + assign debug_clk[0] = 0; + assign debug_clk[1] = dsp_clk; + + assign debug = host_to_dsp_fifo; // debug_mux ? host_to_dsp_fifo : dsp_to_host_fifo; + assign debug_gpio_0 = eth_mac_debug; + assign debug_gpio_1 = 0; +`endif + +endmodule // u2_core + +// wire debug_mux; +// setting_reg #(.my_addr(5)) sr_debug (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), +// .in(set_data),.out(debug_mux),.changed()); + +//assign debug = debug_mux ? host_to_dsp_fifo : dsp_to_host_fifo; +//assign debug = debug_mux ? serdes_to_dsp_fifo : dsp_to_serdes_fifo; + +//assign debug = {{strobe_rx,/*adc_ovf_a*/ 1'b0,adc_a}, +// {run_rx,/*adc_ovf_b*/ 1'b0,adc_b}}; + +//assign debug = debug_tx_dsp; +//assign debug = debug_serdes0; + +//assign debug_gpio_0 = 0; //debug_serdes0; +//assign debug_gpio_1 = 0; //debug_serdes1; + +// assign debug={{3'b0, wb_clk, wb_rst, dsp_rst, por, config_success}, +// {8'b0}, +// {3'b0,ram_loader_ack, ram_loader_stb, ram_loader_we,ram_loader_rst,ram_loader_done }, +// {cpld_start,cpld_mode,cpld_done,cpld_din,cpld_clk,cpld_detached,cpld_misc,cpld_init_b} }; + +//assign debug = {dac_a,dac_b}; + +/* + assign debug = {{ram_loader_done, takeover, 6'd0}, + {1'b0, cpld_start_int, cpld_mode_int, cpld_done_int, sd_clk, sd_csn, sd_miso, sd_mosi}, + {8'd0}, + {cpld_start, cpld_mode, cpld_done, cpld_din, cpld_misc, cpld_detached, cpld_clk, cpld_init_b}}; */ + +/*assign debug = host_to_dsp_fifo; + assign debug_gpio_0 = eth_mac_debug; + assign debug_gpio_1 = 0; + */ +// Assign various commonly used debug buses. +/* + wire [31:0] debug_rx_1 = {uart_tx_o,GMII_TX_EN,strobe_rx,overrun,proc_int,buffer_int,timer_int,GMII_RX_DV, + irq[7:0], + GMII_RXD, + GMII_TXD}; + + wire [31:0] debug_rx_2 = { 5'd0, s8_we, s8_stb, s8_ack, debug_rx[23:0] }; + + wire [31:0] debug_time = {uart_tx_o, 7'b0, + irq[7:0], + 6'b0, GMII_RX_DV, GMII_TX_EN, + 4'b0, exp_pps_in, exp_pps_out, pps_in, pps_int}; + + wire [31:0] debug_irq = {uart_tx_o, iwb_adr, iwb_ack, + irq[7:0], + proc_int, 7'b0 }; + + wire [31:0] debug_eth = + {{uart_tx_o,proc_int,underrun,buffer_int,wr2_ready,wr2_error,wr2_done,wr2_write}, + {8'd0}, + {8'd0}, + {GMII_TX_EN,GMII_RX_DV,Rx_mac_empty,Rx_mac_rd,Rx_mac_err,Rx_mac_sop,Rx_mac_eop,wr2_full} }; + + assign debug_serdes0 = { { rd0_dat[7:0] }, + { ser_tx_clk, ser_tkmsb, ser_tklsb, rd0_sop, rd0_eop, rd0_read, rd0_error, rd0_done }, + { ser_t[15:8] }, + { ser_t[7:0] } }; + + assign debug_serdes1 = { {1'b0,proc_int,underrun,buffer_int,wr0_ready,wr0_error,wr0_done,wr0_write}, + { 1'b0, ser_rx_clk, ser_rkmsb, ser_rklsb, ser_enable, ser_prbsen, ser_loopen, ser_rx_en }, + { ser_r[15:8] }, + { ser_r[7:0] } }; + + assign debug_gpio_1 = {uart_tx_o,7'd0, + 3'd0,rd1_sop,rd1_eop,rd1_read,rd1_done,rd1_error, + debug_txc[15:0]}; + assign debug_gpio_1 = debug_rx; + assign debug_gpio_1 = debug_serdes1; + assign debug_gpio_1 = debug_eth; + + */ + diff --git a/top/u2_rev3_2rx_iad/wave.sh b/top/u2_rev3_2rx_iad/wave.sh new file mode 100755 index 000000000..626f224e5 --- /dev/null +++ b/top/u2_rev3_2rx_iad/wave.sh @@ -0,0 +1,3 @@ +#!/bin/sh + +gtkwave dsp_core_tb.vcd dsp_core_tb.sav & diff --git a/top/u2_rev3_iad/Makefile b/top/u2_rev3_iad/Makefile index 24dffd92b..5ae8846dd 100644 --- a/top/u2_rev3_iad/Makefile +++ b/top/u2_rev3_iad/Makefile @@ -159,6 +159,7 @@ sdr_lib/cordic_stage.v \ sdr_lib/dsp_core_tx.v \ sdr_lib/hb_dec.v \ sdr_lib/hb_interp.v \ +sdr_lib/integrate.v \ sdr_lib/round.v \ sdr_lib/round_reg.v \ sdr_lib/rx_control.v \ @@ -179,8 +180,7 @@ timing/timer.v \ top/u2_core/u2_core.v \ top/u2_rev3/u2_rev3.ucf \ top/u2_rev3/u2_rev3.v \ -top/u2_rev3_iad/dsp_core_rx.v \ -top/u2_rev3_iad/integrate.v +top/u2_rev3_iad/dsp_core_rx.v ################################################## # Process Properties diff --git a/top/u2_rev3_iad/impulse.v b/top/u2_rev3_iad/impulse.v index ecdf101ab..7f0cdc9be 100644 --- a/top/u2_rev3_iad/impulse.v +++ b/top/u2_rev3_iad/impulse.v @@ -60,4 +60,4 @@ module impulse assign adc_ovf_a = 0; assign adc_ovf_b = 0; -endmodule // adc_model +endmodule // impulse diff --git a/top/u2_rev3_iad/integrate.v b/top/u2_rev3_iad/integrate.v deleted file mode 100644 index db33de979..000000000 --- a/top/u2_rev3_iad/integrate.v +++ /dev/null @@ -1,38 +0,0 @@ -module integrate - #(parameter INPUTW = 16, - parameter ACCUMW = 32, - parameter OUTPUTW = 16) - - (input clk_i, - input rst_i, - input ena_i, - - input dump_i, - input [INPUTW-1:0] data_i, - - output reg stb_o, - output reg [OUTPUTW-1:0] integ_o - ); - - wire [ACCUMW-1:0] data_ext = {{ACCUMW-INPUTW{data_i[INPUTW-1]}},data_i}; - reg [ACCUMW-1:0] accum; - - always @(posedge clk_i) - if (rst_i | ~ena_i) - begin - accum <= 0; - integ_o <= 0; - end - else - if (dump_i) - begin - integ_o <= accum[ACCUMW-1:ACCUMW-OUTPUTW]; - accum <= data_ext; - end - else - accum <= accum + data_ext; - - always @(posedge clk_i) - stb_o <= dump_i; - -endmodule // integrate |