diff options
Diffstat (limited to 'tools')
| -rw-r--r-- | tools/README | 31 | ||||
| -rw-r--r-- | tools/README.md | 22 | ||||
| -rwxr-xr-x | tools/usrp_x3xx_fpga_jtag_programmer.sh | 148 |
3 files changed, 170 insertions, 31 deletions
diff --git a/tools/README b/tools/README deleted file mode 100644 index 7c23a1fff..000000000 --- a/tools/README +++ /dev/null @@ -1,31 +0,0 @@ -# -# Copyright 2014 Ettus Research LLC -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - - -UHD Tools -========= - -This folder contains tools which might be useful when debugging or -working on USRPs. None of these tools actually require UHD to be installed! - - -List of tools: -------------- - -impact_jtag_programmer.sh - Program the X3x0 FPGA via JTAG. Requires Xilinx iMPACT. - - diff --git a/tools/README.md b/tools/README.md new file mode 100644 index 000000000..d58577589 --- /dev/null +++ b/tools/README.md @@ -0,0 +1,22 @@ +USRP™ Tools +============================ + +This folder contains tools that are useful for working with and/or debugging +your USRP™ device. Tools in this directory do **not** link against UHD. They are +either stand-alone programs or software to be used in third-party applications. + +For UHD™ software tools, look in `uhd/host/utils`. + + +## List of Tools + +__usrp_x3xx_fpga_jtag_programmer.sh__ + +This tool is to be used with the USRP™ X300 and X310 devices. It allows you to +program the X3x0 FPGA via JTAG. Note that loading the FPGA image via JTAG does +**not** store the FPGA in the on-device flash storage. Thus, as soon as you +cycle power, the image will be lost. To permanently burn an FPGA image, please +refer to `uhd/host/utils/usrp_x3xx_fpga_burner`. + +This tool requires that Xilinx iMPACT has been installed on your system. + diff --git a/tools/usrp_x3xx_fpga_jtag_programmer.sh b/tools/usrp_x3xx_fpga_jtag_programmer.sh new file mode 100755 index 000000000..df563da14 --- /dev/null +++ b/tools/usrp_x3xx_fpga_jtag_programmer.sh @@ -0,0 +1,148 @@ +#!/bin/bash +# + +### Helper functions ########################################## +function help { + cat <<EOHELP + +Usage: impact_jtag_programmer.sh [--help|-h] [--impact-path=<PATH>] --fpga-path=<FPGA Image File> + +-h - Shows this. +--impact-path - Path to the iMPACT binary (if not already in PATH). + Often something like /opt/Xilinx/14.4/ISE_DS/ISE/bin/lin64/impact +--fpga-path - Path to the FPGA image. +--nipcie - When this option is set, this script will fail if it was unable + to stop the NI RIO USRP PCIe driver. + +This script uses Xilinx iMPACT to reprogram the FPGA through the USB JTAG connector. +You can use this to unbrick USRP X3x0 devices. + +EOHELP +} + +### Go, go, go! ############################################### +echo "=======================================" +echo " Copyright 2014 Ettus Research LLC" +echo "" +echo " JTAG Programming Tool" +echo "=======================================" +echo "" + +IMPACTPATH="impact" # This'll work if impact is in $PATH +FPGAIMG="" +FORCENIPCIECHECK=0 + +# Go through cmd line options +for i in "$@" +do +case $i in + -h|--help) + help + exit + ;; + --impact-path=*) + IMPACTPATH="${i#*=}" + ;; + --fpga-path=*) + FPGAIMG="${i#*=}" + ;; + --nipcie) + FORCENIPCIECHECK=1 + ;; + *) + echo Unrecognized option: $i + echo + help + exit + break + ;; +esac +done + +# Test impact binary is available +IMPACTEXECUTABLE=`which $IMPACTPATH` +if [ ! $? -eq 0 ]; then + echo "ERROR: Cannot find 'impact' executable. Make sure you have iMPACT installed" + echo "and that it is in your PATH, or use the --impact-path option to provide the" + echo "location of the 'impact' executable." + exit 1 +fi + +# Test the FPGA image file is readable +if [ -z $FPGAIMG ]; then + echo "ERROR: No FPGA image file provided." + exit 1 +fi +if [ ! -r $FPGAIMG ]; then + echo "ERROR: Can't read the FPGA image file ($FPGAIMG)." + exit 1 +fi + +# Test if we need to stop PCIe +NIUSRPRIOPCIE=`which niusrprio_pcie` +HASNIUSRPRIOPCIE=$? +if [ ! $HASNIUSRPRIOPCIE -eq 0 -a $FORCENIPCIECHECK -eq 1 ]; then + echo "ERROR: Cannot find the niusrprio_pcie executable. Make sure it is in your PATH." + exit 1 +fi + +NIUSRPRIOWASLOADED=0 +# If we do, check if we can run niusrprio_pcie +if [ $HASNIUSRPRIOPCIE -eq 0 ]; then + NIUSRPRIOSTATUSOUTPUT=`niusrprio_pcie status` + NIUSRPRIORETVAL=$? + if [ ! $NIUSRPRIORETVAL -eq 0 ]; then + echo "ERROR: Can't run 'niusrprio_pcie status'. Maybe you forgot to use sudo?" + exit $NIUSRPRIORETVAL + fi + NIUSRPRIOSTATUSOUTPUTGREP=`niusrprio_pcie status | grep usrp` + if [ ! -z "$NIUSRPRIOSTATUSOUTPUTGREP" ]; then + NIUSRPRIOWASLOADED=1 + fi +fi +if [ $NIUSRPRIOWASLOADED -eq 1 ]; then + echo "==== Stopping nisurprio drivers... " + niusrprio_pcie stop + NIUSRPRIORETVAL=$? + if [ ! $NIUSRPRIORETVAL -eq 0 ]; then + echo "ERROR: Can't run 'niusrprio_pcie stop'. Maybe you forgot to use sudo?" + exit $NIUSRPRIORETVAL + else + echo "Done." + fi +fi + +# Create batch file +CMD_PATH=`mktemp XXXXXXXX.impact.cmd` +echo "==== Generating impact batch file ${CMD_PATH}..." +echo "setmode -bscan" > ${CMD_PATH} +echo "setcable -p auto" >> ${CMD_PATH} +echo "addDevice -p 1 -file ${FPGAIMG}" >> ${CMD_PATH} +echo "program -p 1" >> ${CMD_PATH} +echo "quit" >> ${CMD_PATH} + +# Run impact +echo "==== Running impact -- loading ${FPGAIMG} into the FPGA..." +${IMPACTEXECUTABLE} -batch ${CMD_PATH} +RETVAL=$? +if [ ! $RETVAL -eq 0 ]; then + echo "ERROR: Programming failed. Check output above for hints. Maybe you forgot to use sudo?" +else + echo "==== Programming complete! ==============" +fi + +# Remove batch file +rm $CMD_PATH +if [ $NIUSRPRIOWASLOADED -eq 1 ]; then + echo "==== Re-starting nisurprio drivers... " + niusrprio_pcie start + NIUSRPRIORETVAL=$? + if [ ! $NIUSRPRIORETVAL -eq 0 ]; then + echo "WARNING: nisusrprio drivers were running before, but could not be reloaded after flashing." + echo "This is usually not a problem with the FPGA image burning." + fi +fi + +exit $RETVAL + +# C'est tout |