3 files changed, 81 insertions, 0 deletions
diff --git a/tools/gr-usrptest/grc/CMakeLists.txt b/tools/gr-usrptest/grc/CMakeLists.txt
new file mode 100644
index 000000000..47f494abf
--- /dev/null
+++ b/tools/gr-usrptest/grc/CMakeLists.txt
@@ -0,0 +1,23 @@
+# Copyright 2011 Free Software Foundation, Inc.
+#
+# This file is part of GNU Radio
+#
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3, or (at your option)
+# any later version.
+#
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING.  If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+
+install(FILES
+    usrptest_phase_calc_ccf.xml
+    DESTINATION share/gnuradio/grc/blocks
+)
diff --git a/tools/gr-usrptest/grc/usrptest_measurement_sink_f.xml b/tools/gr-usrptest/grc/usrptest_measurement_sink_f.xml
new file mode 100644
index 000000000..c681e457f
--- /dev/null
+++ b/tools/gr-usrptest/grc/usrptest_measurement_sink_f.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0"?>
+<block>
+  <name>measurement_sink_f</name>
+  <key>usrptest_measurement_sink_f</key>
+  <category>[usrptest]</category>
+  <import>import usrptest</import>
+  <make>usrptest.measurement_sink_f($num_samples, $)</make>
+  <!-- Make one 'param' node for every Parameter you want settable from the GUI.
+       Sub-nodes:
+       * name
+       * key (makes the value accessible as $keyname, e.g. in the make node)
+       * type -->
+  <param>
+    <name>...</name>
+    <key>...</key>
+    <type>...</type>
+  </param>
+
+  <!-- Make one 'sink' node per input. Sub-nodes:
+       * name (an identifier for the GUI)
+       * type
+       * vlen
+       * optional (set to 1 for optional inputs) -->
+  <sink>
+    <name>in</name>
+    <type><!-- e.g. int, float, complex, byte, short, xxx_vector, ...--></type>
+  </sink>
+
+  <!-- Make one 'source' node per output. Sub-nodes:
+       * name (an identifier for the GUI)
+       * type
+       * vlen
+       * optional (set to 1 for optional inputs) -->
+  <source>
+    <name>out</name>
+    <type><!-- e.g. int, float, complex, byte, short, xxx_vector, ...--></type>
+  </source>
+</block>
diff --git a/tools/gr-usrptest/grc/usrptest_phase_calc_ccf.xml b/tools/gr-usrptest/grc/usrptest_phase_calc_ccf.xml
new file mode 100644
index 000000000..4c98f56eb
--- /dev/null
+++ b/tools/gr-usrptest/grc/usrptest_phase_calc_ccf.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0"?>
+<block>
+  <name>Calculate phase diff</name>
+  <key>usrptest_phase_calc_ccf</key>
+  <category>[usrptest]</category>
+  <import>import usrptest</import>
+  <make>usrptest.phase_calc_ccf()</make>
+  <sink>
+    <name>in1</name>
+    <type>complex</type>
+  </sink>
+  <sink>
+    <name>in2</name>
+    <type>complex</type>
+  </sink>
+  <source>
+    <name>out</name>
+    <type>float</type>
+  </source>
+</block>