summaryrefslogtreecommitdiffstats
path: root/simple_gemac
diff options
context:
space:
mode:
Diffstat (limited to 'simple_gemac')
-rw-r--r--simple_gemac/simple_gemac.v12
-rw-r--r--simple_gemac/simple_gemac_tb.v7
-rw-r--r--simple_gemac/simple_gemac_wb.v134
-rw-r--r--simple_gemac/simple_gemac_wrapper.v74
4 files changed, 221 insertions, 6 deletions
diff --git a/simple_gemac/simple_gemac.v b/simple_gemac/simple_gemac.v
index adcc2d2fb..5ec2fa2ba 100644
--- a/simple_gemac/simple_gemac.v
+++ b/simple_gemac/simple_gemac.v
@@ -8,6 +8,10 @@ module simple_gemac
// Flow Control Interface
input pause_req, input [15:0] pause_time, input pause_en,
+ // Settings
+ input [47:0] ucast_addr, input [47:0] mcast_addr,
+ input pass_ucast, input pass_mcast, input pass_bcast, input pass_pause, input pass_all,
+
// RX Client Interface
output rx_clk, output [7:0] rx_data, output rx_valid, output rx_error, output rx_ack,
@@ -18,15 +22,11 @@ module simple_gemac
localparam SGE_IFG = 8'd12; // 12 should be the absolute minimum
wire rst_rxclk, rst_txclk;
- oneshot_2clk tx_rst_1shot (.clk_in(tx_clk),.in(reset),.clk_out(tx_clk),.out(rst_txclk)); // FIXME clocks
- oneshot_2clk rx_rst_1shot (.clk_in(rx_clk),.in(reset),.clk_out(rx_clk),.out(rst_rxclk));
+ reset_sync reset_sync_tx (.clk(tx_clk),.reset_in(reset),.reset_out(rst_txclk));
+ reset_sync reset_sync_rx (.clk(rx_clk),.reset_in(reset),.reset_out(rst_rxclk));
wire [15:0] pause_quanta_rcvd;
- wire [47:0] ucast_addr = 48'hF1F2_F3F4_F5F6;
- wire [47:0] mcast_addr = 0;
- wire pass_ucast =1, pass_mcast=0, pass_bcast=1, pass_pause=0, pass_all=0;
-
simple_gemac_tx simple_gemac_tx
(.clk125(clk125),.reset(rst_txclk),
.GMII_GTX_CLK(GMII_GTX_CLK), .GMII_TX_EN(GMII_TX_EN),
diff --git a/simple_gemac/simple_gemac_tb.v b/simple_gemac/simple_gemac_tb.v
index cd2db01b5..6091751a7 100644
--- a/simple_gemac/simple_gemac_tb.v
+++ b/simple_gemac/simple_gemac_tb.v
@@ -29,6 +29,10 @@ module simple_gemac_tb;
assign GMII_RX_DV = GMII_TX_EN;
assign GMII_RX_ER = GMII_TX_ER | FORCE_ERR;
assign GMII_RXD = GMII_TXD ^ FORCE_DAT_ERR;
+
+ wire [47:0] ucast_addr = 48'hF1F2_F3F4_F5F6;
+ wire [47:0] mcast_addr = 0;
+ wire pass_ucast =1, pass_mcast=0, pass_bcast=1, pass_pause=0, pass_all=0;
simple_gemac simple_gemac
(.clk125(clk), .reset(reset),
@@ -37,6 +41,9 @@ module simple_gemac_tb;
.GMII_RX_CLK(GMII_RX_CLK), .GMII_RX_DV(GMII_RX_DV),
.GMII_RX_ER(GMII_RX_ER), .GMII_RXD(GMII_RXD),
.pause_req(pause_req), .pause_time(pause_time), .pause_en(1),
+ .ucast_addr(ucast_addr), .mcast_addr(mcast_addr),
+ .pass_ucast(pass_ucast), .pass_mcast(pass_mcast), .pass_bcast(pass_bcast),
+ .pass_pause(pass_pause), .pass_all(pass_all),
.rx_clk(rx_clk), .rx_data(rx_data),
.rx_valid(rx_valid), .rx_error(rx_error), .rx_ack(rx_ack),
.tx_clk(tx_clk), .tx_data(tx_data),
diff --git a/simple_gemac/simple_gemac_wb.v b/simple_gemac/simple_gemac_wb.v
new file mode 100644
index 000000000..96189e1d9
--- /dev/null
+++ b/simple_gemac/simple_gemac_wb.v
@@ -0,0 +1,134 @@
+
+module wb_reg
+ #(parameter ADDR=0,
+ parameter DEFAULT=0)
+ (input clk, input rst,
+ input [5:0] adr, input wr_acc,
+ input [31:0] dat_i, output reg [31:0] dat_o);
+
+ always @(posedge clk)
+ if(rst)
+ dat_o <= DEFAULT;
+ else if(wr_acc & (adr == ADDR))
+ dat_o <= dat_i;
+
+endmodule // wb_reg
+
+
+
+module simple_gemac_wb
+ (input wb_clk, input wb_rst,
+ input wb_cyc, input wb_stb, input wb_ack, input wb_we,
+ input [7:0] wb_adr, input [31:0] wb_dat_i, output reg [31:0] wb_dat_o,
+
+ inout mdio, output mdc,
+ output [47:0] ucast_addr, output [47:0] mcast_addr,
+ output pass_ucast, output pass_mcast, output pass_bcast,
+ output pass_pause, output pass_all, output pause_en );
+
+ wire wr_acc = wb_cyc & wb_stb & wb_we;
+ wire rd_acc = wb_cyc & wb_stb & ~wb_we;
+
+ wire [5:0] misc_settings;
+ assign {pass_ucast, pass_mcast, pass_bcast, pass_pause, pass_all, pause_en} = misc_settings;
+
+ wb_reg #(.ADDR(0),.DEFAULT(6'b111001))
+ wb_reg_settings (.clk(wb_clk), .rst(wb_rst), .adr(wb_adr[7:2]), .dat_i(wb_dat_i), .dat_o(misc_settings) );
+ wb_reg #(.ADDR(1),.DEFAULT(0))
+ wb_reg_ucast_h (.clk(wb_clk), .rst(wb_rst), .adr(wb_adr[7:2]), .dat_i(wb_dat_i), .dat_o(ucast_addr[47:32]) );
+ wb_reg #(.ADDR(2),.DEFAULT(0))
+ wb_reg_ucast_l (.clk(wb_clk), .rst(wb_rst), .adr(wb_adr[7:2]), .dat_i(wb_dat_i), .dat_o(ucast_addr[31:0]) );
+ wb_reg #(.ADDR(3),.DEFAULT(0))
+ wb_reg_mcast_h (.clk(wb_clk), .rst(wb_rst), .adr(wb_adr[7:2]), .dat_i(wb_dat_i), .dat_o(mcast_addr[47:32]) );
+ wb_reg #(.ADDR(4),.DEFAULT(0))
+ wb_reg_mcast_l (.clk(wb_clk), .rst(wb_rst), .adr(wb_adr[7:2]), .dat_i(wb_dat_i), .dat_o(mcast_addr[31:0]) );
+
+ //MII to CPU
+ wire [7:0] Divider; // Divider for the host clock
+ wire [15:0] CtrlData; // Control Data (to be written to the PHY reg.)
+ wire [4:0] Rgad; // Register Address (within the PHY)
+ wire [4:0] Fiad; // PHY Address
+ wire NoPre; // No Preamble (no 32-bit preamble)
+ wire WCtrlData; // Write Control Data operation
+ wire RStat; // Read Status operation
+ wire ScanStat; // Scan Status operation
+ wire Busy; // Busy Signal
+ wire LinkFail; // Link Integrity Signal
+ wire Nvalid; // Invalid Status (qualifier for the valid scan result)
+ wire [15:0] Prsd; // Read Status Data (data read from the PHY)
+ wire WCtrlDataStart; // This signals resets the WCTRLDATA bit in the MIIM Command register
+ wire RStatStart; // This signal resets the RSTAT BIT in the MIIM Command register
+ wire UpdateMIIRX_DATAReg; // Updates MII RX_DATA register with read data
+
+ // registers for controlling the MII interface
+ reg [2:0] MIICOMMAND;
+ wire [12:0] MIIADDRESS;
+ reg [15:0] MIIRX_DATA;
+ wire [2:0] MIISTATUS;
+
+ wb_reg #(.ADDR(5),.DEFAULT(0))
+ wb_reg_miimoder (.clk(wb_clk), .rst(wb_rst), .adr(wb_adr[7:2]), .dat_i(wb_dat_i), .dat_o({NoPre,Divider}) );
+
+ wb_reg #(.ADDR(6),.DEFAULT(0))
+ wb_reg_miiaddr (.clk(wb_clk), .rst(wb_rst), .adr(wb_adr[7:2]), .dat_i(wb_dat_i), .dat_o(MIIADDRESS) );
+
+ wb_reg #(.ADDR(7),.DEFAULT(0))
+ wb_reg_miidata (.clk(wb_clk), .rst(wb_rst), .adr(wb_adr[7:2]), .dat_i(wb_dat_i), .dat_o(CtrlData) );
+
+ // MIICOMMAND register - needs special treatment because of auto-resetting bits
+ always @ (posedge wb_clk)
+ if (wb_rst)
+ MIICOMMAND <= 0;
+ else
+ if (wr_acc & (wb_adr == 8'd8))
+ MIICOMMAND <= wb_dat_i;
+ else
+ begin
+ if ( WCtrlDataStart )
+ MIICOMMAND[2] <= 0;
+ if ( RStatStart )
+ MIICOMMAND[1] <= 0;
+ end
+
+ // MIIRX_DATA register
+ always @(posedge wb_clk)
+ if (wb_rst)
+ MIIRX_DATA <= 0;
+ else
+ if (UpdateMIIRX_DATAReg )
+ MIIRX_DATA <= Prsd;
+
+ // MIICOMMAND
+ assign WCtrlData = MIICOMMAND[2];
+ assign RStat = MIICOMMAND[1];
+ assign ScanStat = MIICOMMAND[0];
+ // MIIADDRESS
+ assign Rgad = MIIADDRESS[12:8];
+ assign Fiad = MIIADDRESS[4:0];
+ // MIISTATUS
+ assign MIISTATUS[2:0] = { Nvalid, Busy, LinkFail };
+
+ eth_miim eth_miim
+ (.Clk(wb_clk), .Reset(wb_rst),
+ .Divider(Divider), .NoPre(NoPre), .CtrlData(CtrlData), .Rgad(Rgad), .Fiad(Fiad),
+ .WCtrlData(WCtrlData), .RStat(RStat), .ScanStat(ScanStat), .Mdio(mdio), .Mdc(mdc),
+ .Busy(Busy), .Prsd(Prsd), .LinkFail(LinkFail), .Nvalid(Nvalid),
+ .WCtrlDataStart(WCtrlDataStart), .RStatStart(RStatStart),
+ .UpdateMIIRX_DATAReg(UpdateMIIRX_DATAReg) );
+
+ always @(posedge wb_clk)
+ case(wb_adr)
+ 0 : wb_dat_o <= misc_settings;
+ 1 : wb_dat_o <= ucast_addr[47:32];
+ 2 : wb_dat_o <= ucast_addr[31:0];
+ 3 : wb_dat_o <= mcast_addr[47:32];
+ 4 : wb_dat_o <= mcast_addr[31:0];
+ 5 : wb_dat_o <= {NoPre,Divider};
+ 6 : wb_dat_o <= MIIADDRESS;
+ 7 : wb_dat_o <= CtrlData;
+ 8 : wb_dat_o <= MIICOMMAND;
+ 9 : wb_dat_o <= MIISTATUS;
+ 10: wb_dat_o <= MIIRX_DATA;
+ endcase // case (wb_adr)
+
+endmodule // simple_gemac_wb
diff --git a/simple_gemac/simple_gemac_wrapper.v b/simple_gemac/simple_gemac_wrapper.v
new file mode 100644
index 000000000..c9f5044f9
--- /dev/null
+++ b/simple_gemac/simple_gemac_wrapper.v
@@ -0,0 +1,74 @@
+
+module simple_gemac_wrapper
+ (input clk125, input reset,
+ // GMII
+ output GMII_GTX_CLK, output GMII_TX_EN, output GMII_TX_ER, output [7:0] GMII_TXD,
+ input GMII_RX_CLK, input GMII_RX_DV, input GMII_RX_ER, input [7:0] GMII_RXD,
+
+ // Flow Control Interface
+ input pause_req, input [15:0] pause_time,
+
+ // RX Client Interface
+ output rx_clk, output [7:0] rx_ll_data, output rx_ll_sof, output rx_ll_eof,
+ output rx_ll_error, output rx_ll_src_rdy, input rx_ll_dst_rdy,
+
+ // TX Client Interface
+ output tx_clk, input [7:0] tx_ll_data, input tx_ll_sof, input tx_ll_eof,
+ input tx_ll_src_rdy, output tx_ll_dst_rdy,
+
+ // Wishbone Interface
+ input wb_clk, input wb_rst, input wb_stb, input wb_cyc, output wb_ack, input wb_we,
+ input [7:0] wb_adr, input [31:0] wb_dat_i, output [31:0] wb_dat_o,
+
+ // MIIM
+ inout mdio, output mdc );
+
+ wire [7:0] rx_data, tx_data;
+ wire tx_clk, tx_valid, tx_error, tx_ack;
+ wire rx_clk, rx_valid, rx_error, rx_ack;
+
+ wire [47:0] ucast_addr, mcast_addr;
+ wire pass_ucast, pass_mcast, pass_bcast, pass_pause, pass_all, pause_en;
+
+ wire rst_rxclk, rst_txclk;
+ reset_sync reset_sync_tx (.clk(tx_clk),.reset_in(reset),.reset_out(rst_txclk));
+ reset_sync reset_sync_rx (.clk(rx_clk),.reset_in(reset),.reset_out(rst_rxclk));
+
+ simple_gemac simple_gemac
+ (.clk125(clk125), .reset(reset),
+ .GMII_GTX_CLK(GMII_GTX_CLK), .GMII_TX_EN(GMII_TX_EN),
+ .GMII_TX_ER(GMII_TX_ER), .GMII_TXD(GMII_TXD),
+ .GMII_RX_CLK(GMII_RX_CLK), .GMII_RX_DV(GMII_RX_DV),
+ .GMII_RX_ER(GMII_RX_ER), .GMII_RXD(GMII_RXD),
+ .pause_req(pause_req), .pause_time(pause_time), .pause_en(1),
+ .ucast_addr(ucast_addr), .mcast_addr(mcast_addr),
+ .pass_ucast(pass_ucast), .pass_mcast(pass_mcast), .pass_bcast(pass_bcast),
+ .pass_pause(pass_pause), .pass_all(pass_all),
+ .rx_clk(rx_clk), .rx_data(rx_data),
+ .rx_valid(rx_valid), .rx_error(rx_error), .rx_ack(rx_ack),
+ .tx_clk(tx_clk), .tx_data(tx_data),
+ .tx_valid(tx_valid), .tx_error(tx_error), .tx_ack(tx_ack)
+ );
+
+ simple_gemac_wb simple_gemac_wb
+ (.wb_clk(wb_clk), .wb_rst(wb_rst),
+ .wb_cyc(wb_cyc), .wb_stb(wb_stb), .wb_ack(wb_ack), .wb_we(wb_we),
+ .wb_adr(wb_adr), .wb_dat_i(wb_dat_i), .wb_dat_o(wb_dat_o),
+ .mdio(mdio), .mdc(mdc),
+ .ucast_addr(ucast_addr), .mcast_addr(mcast_addr),
+ .pass_ucast(pass_ucast), .pass_mcast(pass_mcast), .pass_bcast(pass_bcast),
+ .pass_pause(pass_pause), .pass_all(pass_all), .pause_en(pause_en) );
+
+ rxmac_to_ll8 rx_adapt
+ (.clk(rx_clk), .reset(rx_reset), .clear(0),
+ .rx_data(rx_data), .rx_valid(rx_valid), .rx_error(rx_error), .rx_ack(rx_ack),
+ .ll_data(rx_ll_data), .ll_sof(rx_ll_sof), .ll_eof(rx_ll_eof), .ll_error(rx_ll_error),
+ .ll_src_rdy(rx_ll_src_rdy), .ll_dst_rdy(rx_ll_dst_rdy));
+
+ ll8_to_txmac ll8_to_txmac
+ (.clk(tx_clk), .reset(tx_reset), .clear(0),
+ .ll_data(tx_ll_data), .ll_sof(tx_ll_sof), .ll_eof(tx_ll_eof),
+ .ll_src_rdy(tx_ll_src_rdy), .ll_dst_rdy(tx_ll_dst_rdy),
+ .tx_data(tx_data), .tx_valid(tx_valid), .tx_error(tx_error), .tx_ack(tx_ack));
+
+endmodule // simple_gemac_wrapper
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 22:00:08 +0000