summaryrefslogtreecommitdiffstats
path: root/sdr_lib
diff options
context:
space:
mode:
Diffstat (limited to 'sdr_lib')
-rw-r--r--sdr_lib/rx_control.v77
-rw-r--r--sdr_lib/tx_control.v72
2 files changed, 62 insertions, 87 deletions
diff --git a/sdr_lib/rx_control.v b/sdr_lib/rx_control.v
index d41a28bcf..0adeb0794 100644
--- a/sdr_lib/rx_control.v
+++ b/sdr_lib/rx_control.v
@@ -9,15 +9,12 @@ module rx_control
input [31:0] master_time,
output overrun,
- // To Buffer interface
+ // To FIFO interface of Buffer Pool
output [31:0] wr_dat_o,
- output wr_write_o,
- output wr_done_o,
- output wr_error_o,
-
+ output [3:0] wr_flags_o,
input wr_ready_i,
- input wr_full_i,
-
+ output wr_ready_o,
+
// From DSP Core
input [31:0] sample,
output run,
@@ -66,47 +63,17 @@ module rx_control
.read(read_ctrl), .empty(empty_ctrl) );
// Buffer interface to internal FIFO
- wire write, full, read, empty;
- wire sop_o, eop_o;
-
- reg xfer_state;
- localparam XFER_IDLE = 1'b0;
- localparam XFER_GO = 1'b1;
-
- always @(posedge clk)
- if(rst)
- xfer_state <= XFER_IDLE;
- else
- if(clear_overrun)
- xfer_state <= XFER_IDLE;
- else
- case(xfer_state)
- XFER_IDLE :
- if(wr_ready_i)
- xfer_state <= XFER_GO;
- XFER_GO :
- if((eop_o | wr_full_i) & wr_write_o)
- xfer_state <= XFER_IDLE;
- default :
- xfer_state <= XFER_IDLE;
- endcase // case(xfer_state)
-
- assign wr_write_o = (xfer_state == XFER_GO) & ~empty;
- assign wr_done_o = (eop_o & wr_write_o);
- assign wr_error_o = 0; // FIXME add check here for eop if we have wr_full_i once we have IBS
-
- assign read = wr_write_o | (~empty & ~sop_o); // FIXME what if there is junk between packets?
-
- wire [33:0] fifo_line;
+ wire have_space, write;
+ wire [35:0] fifo_line;
// Internal FIFO, size 9 is 2K, size 10 is 4K
- cascadefifo2 #(.WIDTH(34),.SIZE(FIFOSIZE)) rxfifo
- (.clk(clk),.rst(rst),.clear(clear_overrun),
- .datain(fifo_line), .write(write), .full(full),
- .dataout({sop_o,eop_o,wr_dat_o}), .read(read), .empty(empty),
+ fifo_cascade #(.WIDTH(36),.SIZE(FIFOSIZE)) rxfifo
+ (.clk(clk),.reset(rst),.clear(clear_overrun),
+ .datain(fifo_line), .src_rdy_i(write), .dst_rdy_o(have_space),
+ .dataout({wr_flags_o,wr_dat_o}), .src_rdy_o(wr_ready_o), .dst_rdy_i(wr_ready_i),
.space(),.occupied(fifo_occupied) );
- assign fifo_full = full;
- assign fifo_empty = empty;
+ assign fifo_full = ~have_space;
+ assign fifo_empty = ~wr_ready_o;
// Internal FIFO to DSP interface
reg [22:0] lines_left;
@@ -161,13 +128,13 @@ module rx_control
else if(too_late)
ibs_state <= IBS_OVERRUN;
IBS_FIRSTLINE :
- if(full | strobe)
+ if(~have_space | strobe)
ibs_state <= IBS_OVERRUN;
else
ibs_state <= IBS_RUNNING;
IBS_RUNNING :
if(strobe)
- if(full)
+ if(~have_space)
ibs_state <= IBS_OVERRUN;
else
begin
@@ -193,21 +160,21 @@ module rx_control
end
else
lines_left_frame <= lines_left_frame - 1;
- end // else: !if(full)
+ end // else: !if(~have_space)
endcase // case(ibs_state)
- assign fifo_line = (ibs_state == IBS_FIRSTLINE) ? {1'b1,1'b0,master_time} :
- {1'b0,((lines_left==1)|(lines_left_frame==1)),sample};
+ assign fifo_line = (ibs_state == IBS_FIRSTLINE) ? {2'b0,1'b0,1'b1,master_time} :
+ {2'b0,((lines_left==1)|(lines_left_frame==1)),1'b0,sample};
- assign write = ((ibs_state == IBS_FIRSTLINE) | strobe) & ~full; // & (ibs_state == IBS_RUNNING) should strobe only when running
+ assign write = ((ibs_state == IBS_FIRSTLINE) | strobe) & have_space; // & (ibs_state == IBS_RUNNING) should strobe only when running
assign overrun = (ibs_state == IBS_OVERRUN);
assign run = (ibs_state == IBS_RUNNING) | (ibs_state == IBS_FIRSTLINE);
assign read_ctrl = ( (ibs_state == IBS_IDLE) |
- ((ibs_state == IBS_RUNNING) & strobe & ~full & (lines_left==1) & chain) )
+ ((ibs_state == IBS_RUNNING) & strobe & have_space & (lines_left==1) & chain) )
& ~empty_ctrl;
- assign debug_rx = { 6'd0,send_imm,chain,
- wr_write_o, wr_done_o, wr_ready_i, wr_full_i,xfer_state,eop_o, sop_o, run,
- write,full,read,empty,write_ctrl,full_ctrl,read_ctrl,empty_ctrl,
+ assign debug_rx = { 8'd0,
+ 1'd0, send_imm, chain, wr_ready_i,wr_ready_o, 2'b0, run,
+ write,have_space,wr_flags_o[1:0],write_ctrl,full_ctrl,read_ctrl,empty_ctrl,
sc_pre1, clear_overrun, go_now, too_late, overrun, ibs_state[2:0] };
endmodule // rx_control
diff --git a/sdr_lib/tx_control.v b/sdr_lib/tx_control.v
index 0c4ab1a52..e5fed0b93 100644
--- a/sdr_lib/tx_control.v
+++ b/sdr_lib/tx_control.v
@@ -9,13 +9,11 @@ module tx_control
input [31:0] master_time,
output underrun,
- // To Buffer interface
+ // To FIFO interface from Buffer Pool
input [31:0] rd_dat_i,
- input rd_sop_i,
- input rd_eop_i,
- output rd_read_o,
- output rd_done_o,
- output rd_error_o,
+ input [3:0] rd_flags_i,
+ input rd_ready_i,
+ output rd_ready_o,
// To DSP Core
output [31:0] sample,
@@ -31,6 +29,10 @@ module tx_control
output [31:0] debug
);
+ wire rd_sop_i = rd_flags_i[0]; // Unused
+ wire rd_eop_i = rd_flags_i[1];
+ wire rd_occ_i = rd_flags_i[3:2]; // Unused, should always be 0
+
// Buffer interface to internal FIFO
wire write_data, write_ctrl, full_data, full_ctrl;
wire read_data, read_ctrl, empty_data, empty_ctrl;
@@ -39,57 +41,63 @@ module tx_control
reg [2:0] held_flags;
localparam XFER_IDLE = 0;
- localparam XFER_1 = 1;
- localparam XFER_2 = 2;
- localparam XFER_DATA = 3;
+ localparam XFER_CTRL = 1;
+ localparam XFER_PKT = 2;
+ // Add underrun state?
always @(posedge clk)
if(rst)
xfer_state <= XFER_IDLE;
+ else if(clear_state)
+ xfer_state <= XFER_IDLE;
else
- if(clear_state)
- xfer_state <= XFER_IDLE;
- else
+ if(rd_ready_i & rd_ready_o)
case(xfer_state)
XFER_IDLE :
- if(rd_sop_i)
- xfer_state <= XFER_1;
- XFER_1 :
begin
- xfer_state <= XFER_2;
+ xfer_state <= XFER_CTRL;
held_flags <= rd_dat_i[2:0];
end
- XFER_2 :
- if(~full_ctrl)
- xfer_state <= XFER_DATA;
- XFER_DATA :
- if(rd_eop_i & ~full_data)
+ XFER_CTRL :
+ xfer_state <= XFER_PKT;
+ XFER_PKT :
+ if(rd_eop_i)
xfer_state <= XFER_IDLE;
endcase // case(xfer_state)
+
+ wire have_data_space;
+ assign full_data = ~have_data_space;
- assign write_data = (xfer_state == XFER_DATA) & ~full_data;
- assign write_ctrl = (xfer_state == XFER_2) & ~full_ctrl;
+ assign write_data = (xfer_state == XFER_PKT) & rd_ready_i & rd_ready_o;
+ assign write_ctrl = (xfer_state == XFER_CTRL) & rd_ready_i & rd_ready_o;
- assign rd_read_o = (xfer_state == XFER_1) | write_data | write_ctrl;
- assign rd_done_o = 0; // Always take everything we're given
- assign rd_error_o = 0; // Should we indicate overruns here?
+ assign rd_ready_o = ~full_data & ~full_ctrl;
wire [31:0] data_o;
- wire sop_o, eop_o, eob, sob, send_imm;
+ wire eop_o, eob, sob, send_imm;
wire [31:0] sendtime;
wire [4:0] occ_ctrl;
-
- cascadefifo2 #(.WIDTH(34),.SIZE(FIFOSIZE)) txctrlfifo
+/*
+ cascadefifo2 #(.WIDTH(33),.SIZE(FIFOSIZE)) txctrlfifo
(.clk(clk),.rst(rst),.clear(clear_state),
- .datain({rd_sop_i,rd_eop_i,rd_dat_i}), .write(write_data), .full(full_data),
- .dataout({sop_o,eop_o,data_o}), .read(read_data), .empty(empty_data),
+ .datain({rd_eop_i,rd_dat_i[31:0]}), .write(write_data), .full(full_data),
+ .dataout({eop_o,data_o}), .read(read_data), .empty(empty_data),
+ .space(), .occupied(fifo_occupied) );
+*/
+ wire have_data;
+ assign empty_data = ~have_data;
+
+ fifo_cascade #(.WIDTH(33),.SIZE(FIFOSIZE)) txctrlfifo
+ (.clk(clk),.reset(rst),.clear(clear_state),
+ .datain({rd_eop_i,rd_dat_i[31:0]}), .src_rdy_i(write_data), .dst_rdy_o(have_data_space),
+ .dataout({eop_o,data_o}), .src_rdy_o(have_data), .dst_rdy_i(read_data),
.space(), .occupied(fifo_occupied) );
assign fifo_full = full_data;
assign fifo_empty = empty_data;
shortfifo #(.WIDTH(35)) ctrlfifo
(.clk(clk),.rst(rst),.clear(clear_state),
- .datain({held_flags[2:0],rd_dat_i}), .write(write_ctrl), .full(full_ctrl),
+ .datain({held_flags[2:0],rd_dat_i[31:0]}), .write(write_ctrl), .full(full_ctrl),
.dataout({send_imm,sob,eob,sendtime}), .read(read_ctrl), .empty(empty_ctrl),
.space(), .occupied(occ_ctrl) );