diff options
Diffstat (limited to 'images')
| -rw-r--r-- | images/.gitignore | 2 | ||||
| -rw-r--r-- | images/CMakeLists.txt | 42 | ||||
| -rw-r--r-- | images/Makefile | 176 | ||||
| -rw-r--r-- | images/README | 25 |
4 files changed, 245 insertions, 0 deletions
diff --git a/images/.gitignore b/images/.gitignore new file mode 100644 index 000000000..8947b7a83 --- /dev/null +++ b/images/.gitignore @@ -0,0 +1,2 @@ +/build +/images diff --git a/images/CMakeLists.txt b/images/CMakeLists.txt new file mode 100644 index 000000000..75cb4c9d3 --- /dev/null +++ b/images/CMakeLists.txt @@ -0,0 +1,42 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +CMAKE_MINIMUM_REQUIRED(VERSION 2.6) +PROJECT(UHD-images NONE) + +######################################################################## +# Config Files (include order is important) +######################################################################## +INCLUDE(${CMAKE_SOURCE_DIR}/../host/config/Python.cmake) +INCLUDE(${CMAKE_SOURCE_DIR}/../host/config/Version.cmake) + +######################################################################## +# Setup CPack +######################################################################## +SET(CPACK_PACKAGE_DESCRIPTION_SUMMARY "Ettus Research - Universal Hardware Driver Images") +SET(CPACK_PACKAGE_VENDOR "Ettus Research LLC") +SET(CPACK_PACKAGE_CONTACT "support@ettus.com") +SET(CPACK_PACKAGE_VERSION_MAJOR ${UHD_VERSION_MAJOR}) +SET(CPACK_PACKAGE_VERSION_MINOR ${UHD_VERSION_MINOR}) +SET(CPACK_PACKAGE_VERSION_PATCH ${UHD_VERSION_PATCH}) +INCLUDE(CPack) #include after setting vars +MESSAGE(STATUS "Version: ${CPACK_PACKAGE_VERSION}") + +######################################################################## +# Install Images +######################################################################## +INSTALL(DIRECTORY ${CMAKE_SOURCE_DIR}/images DESTINATION share/uhd) diff --git a/images/Makefile b/images/Makefile new file mode 100644 index 000000000..228b6fb7d --- /dev/null +++ b/images/Makefile @@ -0,0 +1,176 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +all: + @echo "Pick a specific target" + +######################################################################## +# Common Variables +######################################################################## +TOP_DIR = $(shell pwd) +TOP_FW_DIR = $(TOP_DIR)/../firmware +TOP_FPGA_DIR = $(TOP_DIR)/../fpga +BUILT_IMAGES_DIR = $(TOP_DIR)/images +CMAKE_BUILD_DIR = $(TOP_DIR)/build + +##filled in below +IMAGES_LIST = + +######################################################################## +# Utility Checks +######################################################################## +ifeq ($(shell sdcc --help > /dev/null 2>&1 && echo $$?),0) + HAS_SDCC=1 +endif + +ifeq ($(shell mb-gcc --help > /dev/null 2>&1 && echo $$?),0) + HAS_MB_GCC=1 +endif + +ifeq ($(shell xtclsh -h > /dev/null 2>&1 && echo $$?),0) + HAS_XTCLSH=1 +endif + +######################################################################## +# USRP1 firmware +######################################################################## +ifdef HAS_SDCC + +_usrp1_fw_dir = $(TOP_FW_DIR)/fx2 +_usrp1_fw_ihx = $(BUILT_IMAGES_DIR)/usrp1_fw.ihx +IMAGES_LIST += $(_usrp1_fw_ihx) + +$(_usrp1_fw_ihx): + cd $(_usrp1_fw_dir) && rm -rf build + cd $(_usrp1_fw_dir) && mkdir build + cd $(_usrp1_fw_dir)/build && cmake ../ + cd $(_usrp1_fw_dir)/build && make + cp $(_usrp1_fw_dir)/build/usrp1/usrp1_fw.ihx $@ + +endif + +######################################################################## +# USRP1 fpga +######################################################################## +_usrp1_fpga_dir = $(TOP_FPGA_DIR)/usrp1/rbf/rev4 +_usrp1_fpga_rbf = $(BUILT_IMAGES_DIR)/usrp1_fpga.rbf +_usrp1_fpga_4rx_rbf = $(BUILT_IMAGES_DIR)/usrp1_fpga_4rx.rbf +IMAGES_LIST += $(_usrp1_fpga_rbf) $(_usrp1_fpga_4rx_rbf) + +$(_usrp1_fpga_rbf): + cp $(_usrp1_fpga_dir)/std_2rxhb_2tx.rbf $@ + +$(_usrp1_fpga_4rx_rbf): + cp $(_usrp1_fpga_dir)/std_4rx_0tx.rbf $@ + +######################################################################## +# USRP2 and USRP-N2XX firmware +######################################################################## +ifdef HAS_MB_GCC + +_usrp2_fw_dir = $(TOP_FW_DIR)/microblaze +_usrp2_fw_bin = $(BUILT_IMAGES_DIR)/usrp2_fw.bin +_usrp_n2xx_fw_bin = $(BUILT_IMAGES_DIR)/usrp_n2xx_fw.bin +IMAGES_LIST += $(_usrp2_fw_bin) + +$(_usrp2_fw_bin) $(_usrp_n2xx_fw_bin): + cd $(_usrp2_fw_dir) && ./bootstrap + cd $(_usrp2_fw_dir) && ./configure --host=mb + make -C $(_usrp2_fw_dir) clean + make -C $(_usrp2_fw_dir) all + cp $(_usrp2_fw_dir)/usrp2/usrp2_txrx_uhd.bin $(_usrp2_fw_bin) + cp $(_usrp2_fw_dir)/usrp2p/usrp2p_txrx_uhd.bin $(_usrp_n2xx_fw_bin) + +endif + +######################################################################## +# USRP2 fpga +######################################################################## +ifdef HAS_XTCLSH + +_usrp2_fpga_dir = $(TOP_FPGA_DIR)/usrp2/top/u2_rev3 +_usrp2_fpga_bin = $(BUILT_IMAGES_DIR)/usrp2_fpga.bin +IMAGES_LIST += $(_usrp2_fpga_bin) + +$(_usrp2_fpga_bin): + cd $(_usrp2_fpga_dir) && make -f Makefile.udp clean + cd $(_usrp2_fpga_dir) && make -f Makefile.udp bin + cp $(_usrp2_fpga_dir)/build-udp/u2_rev3.bin $@ + +endif + +######################################################################## +# USRP-N210 fpga +######################################################################## +ifdef HAS_XTCLSH + +_usrp_n210_fpga_dir = $(TOP_FPGA_DIR)/usrp2/top/u2plus +_usrp_n210_fpga_bin = $(BUILT_IMAGES_DIR)/usrp_n210_fpga.bin +IMAGES_LIST += $(_usrp_n210_fpga_bin) + +$(_usrp_n210_fpga_bin): + cd $(_usrp_n210_fpga_dir) && make clean + cd $(_usrp_n210_fpga_dir) && make bin + cp $(_usrp_n210_fpga_dir)/build/u2plus.bin $@ + +endif + +######################################################################## +# USRP-E100 fpga +######################################################################## +ifdef HAS_XTCLSH + +_usrp_e100_fpga_dir = $(TOP_FPGA_DIR)/usrp2/top/u1e +_usrp_e100_fpga_bin = $(BUILT_IMAGES_DIR)/usrp_e100_fpga.bin +IMAGES_LIST += $(_usrp_e100_fpga_bin) + +$(_usrp_e100_fpga_bin): + cd $(_usrp_e100_fpga_dir) && make clean + cd $(_usrp_e100_fpga_dir) && make bin + cp $(_usrp_e100_fpga_dir)/build/u1e.bin $@ + +endif + +######################################################################## +# Build rules +######################################################################## +##little rule to make the images directory +$(BUILT_IMAGES_DIR): + mkdir $@ + +images: $(BUILT_IMAGES_DIR) $(IMAGES_LIST) + chmod -x $(BUILT_IMAGES_DIR)/* + +clean: + $(RM) -rf $(BUILT_IMAGES_DIR) + $(RM) -rf $(CMAKE_BUILD_DIR) + +#packages that a linux machine can build +linux-packages: + mkdir -p $(CMAKE_BUILD_DIR) + + cd $(CMAKE_BUILD_DIR) && cmake -DCPACK_GENERATOR=TGZ $(TOP_DIR) + make -C $(CMAKE_BUILD_DIR) package + + cd $(CMAKE_BUILD_DIR) && cmake -DCPACK_GENERATOR=ZIP $(TOP_DIR) + make -C $(CMAKE_BUILD_DIR) package + + cd $(CMAKE_BUILD_DIR) && cmake -DCPACK_GENERATOR=DEB $(TOP_DIR) + make -C $(CMAKE_BUILD_DIR) package + + cd $(CMAKE_BUILD_DIR) && cmake -DCPACK_GENERATOR=RPM $(TOP_DIR) + make -C $(CMAKE_BUILD_DIR) package diff --git a/images/README b/images/README new file mode 100644 index 000000000..2f9c6a95e --- /dev/null +++ b/images/README @@ -0,0 +1,25 @@ +The images directory contains the following: + - a Makefile for building firmware and fpga images + - a CMake file for building an images package + +The Makefile and build systems for the images are probably Unix specific. +Its best to build the images on a Unix system with standard build tools. +The CMake package target will create an images package for your system. + +To build the images (unix): + make clean + make images + +To build the package (unix): + mkdir build + cd build + cmake -DCPACK_GENERATOR=<type> ../ + make package + +The package generator types are described here: + http://www.cmake.org/Wiki/CMake:CPackPackageGenerators + +Fedora note: + The sdcc binaries are prefixed with "sdcc-" which breaks the build. + However, /usr/libexec/sdcc contains properly named sdcc binaries. + export PATH=${PATH}:/usr/libexec/sdcc |