diff options
Diffstat (limited to 'host')
38 files changed, 1237 insertions, 345 deletions
diff --git a/host/docs/dboards.rst b/host/docs/dboards.rst index 080117651..d93fb9d6a 100644 --- a/host/docs/dboards.rst +++ b/host/docs/dboards.rst @@ -26,6 +26,10 @@ The boards have no tunable elements or programmable gains. Though the magic of aliasing, you can down-convert signals greater than the Nyquist rate of the ADC. +BasicRX Bandwidth (Hz): 250M + +LFRX Bandwidth (Hz): 30M + ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Basic TX and and LFTX ^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -40,6 +44,10 @@ The boards have no tunable elements or programmable gains. Though the magic of aliasing, you can up-convert signals greater than the Nyquist rate of the DAC. +BasicTX Bandwidth (Hz): 250M + +LFTX Bandwidth (Hz): 30M + ^^^^^^^^^^^^^^^^^^^^^^^^^^^ DBSRX ^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -53,7 +61,7 @@ Receive Gains: **GC1**, Range: 0-56dB **GC2**, Range: 0-24dB -Low-Pass Filter Bandwidth (Hz): 4M-33M +Bandwidth (Hz): 8M-66M ^^^^^^^^^^^^^^^^^^^^^^^^^^^ RFX Series @@ -68,6 +76,10 @@ the receive antenna will always be set to RX2, regardless of the settings. Receive Gains: **PGA0**, Range: 0-70dB (except RFX400 range is 0-45dB) +Bandwidths (Hz): + * **RX**: 40M + * **TX**: 40M + ^^^^^^^^^^^^^^^^^^^^^^^^^^^ XCVR 2450 ^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -93,9 +105,9 @@ Receive Gains: * **LNA**, Range: 0-30.5dB * **VGA**, Range: 0-62dB -Low-Pass Filter Bandwidths (Hz): - * **RX**: 7.5M, 9.5M, 14M, 18M; (each +-0, 5, or 10%) - * **TX**: 12M, 18M, 24M +Bandwidths (Hz): + * **RX**: 15M, 19M, 28M, 36M; (each +-0, 5, or 10%) + * **TX**: 24M, 36M, 48M ^^^^^^^^^^^^^^^^^^^^^^^^^^^ WBX Series @@ -112,9 +124,9 @@ Transmit Gains: **PGA0**, Range: 0-25dB Receive Gains: **PGA0**, Range: 0-31.5dB -Low-Pass Filter Bandwidths (Hz): - * **RX**: 20M (Fixed) - * **TX**: 20M (Fixed) +Bandwidths (Hz): + * **RX**: 40M + * **TX**: 40M ^^^^^^^^^^^^^^^^^^^^^^^^^^^ TVRX @@ -125,7 +137,7 @@ Receive Gains: * **RF**, Range: -13.3-50.3dB (frequency-dependent) * **IF**, Range: -1.5-32.5dB -Bandpass Filter Bandwidth: 6MHz +Bandwidth: 6MHz ------------------------------------------------------------------------ Daughterboard Modifications diff --git a/host/examples/CMakeLists.txt b/host/examples/CMakeLists.txt index d19838335..a8873f8d3 100644 --- a/host/examples/CMakeLists.txt +++ b/host/examples/CMakeLists.txt @@ -43,3 +43,15 @@ INSTALL(TARGETS tx_waveforms RUNTIME DESTINATION ${PKG_DATA_DIR}/examples ) + +######################################################################## +# ASCII Art DFT - requires curses, so this part is optional +######################################################################## +INCLUDE(FindCurses) + +IF(CURSES_FOUND) + INCLUDE_DIRECTORIES(${CURSES_INCLUDE_DIR}) + ADD_EXECUTABLE(rx_ascii_art_dft rx_ascii_art_dft.cpp) + TARGET_LINK_LIBRARIES(rx_ascii_art_dft uhd ${CURSES_LIBRARIES}) + INSTALL(TARGETS rx_ascii_art_dft RUNTIME DESTINATION ${PKG_DATA_DIR}/examples) +ENDIF(CURSES_FOUND) diff --git a/host/examples/ascii_art_dft.hpp b/host/examples/ascii_art_dft.hpp new file mode 100644 index 000000000..ee2267c2d --- /dev/null +++ b/host/examples/ascii_art_dft.hpp @@ -0,0 +1,320 @@ +// +// ASCII Art DFT Plotter - Josh Blum +// + +#ifndef ASCII_ART_DFT_HPP +#define ASCII_ART_DFT_HPP + +#include <string> +#include <cstddef> +#include <vector> +#include <complex> +#include <stdexcept> + +namespace acsii_art_dft{ + + //! Type produced by the log power DFT function + typedef std::vector<float> log_pwr_dft_type; + + /*! + * Get a logarithmic power DFT of the input samples. + * Samples are expected to be in the range [-1.0, 1.0]. + * \param samps a pointer to an array of complex samples + * \param nsamps the number of samples in the array + * \return a real range of DFT bins in units of dB + */ + template <typename T> log_pwr_dft_type log_pwr_dft( + const std::complex<T> *samps, size_t nsamps + ); + + /*! + * Convert a DFT to a piroundable ascii plot. + * \param dft the log power dft bins + * \param width the frame width in characters + * \param height the frame height in characters + * \param samp_rate the sample rate in Sps + * \param dc_freq the DC frequency in Hz + * \param dyn_rng the dynamic range in dB + * \param ref_lvl the reference level in dB + * \return the plot as an ascii string + */ + std::string dft_to_plot( + const log_pwr_dft_type &dft, + size_t width, + size_t height, + double samp_rate, + double dc_freq, + float dyn_rng, + float ref_lvl + ); + +} //namespace ascii_dft + +/*********************************************************************** + * Implementation includes + **********************************************************************/ +#include <cmath> +#include <sstream> +#include <algorithm> + +/*********************************************************************** + * Helper functions + **********************************************************************/ +namespace {/*anon*/ + + static const double pi = double(std::acos(-1.0)); + + //! Round a floating-point value to the nearest integer + template <typename T> int iround(T val){ + return (val > 0)? int(val + 0.5) : int(val - 0.5); + } + + //! Pick the closest number that is nice to display + template <typename T> T to_clean_num(const T num){ + if (num == 0) return 0; + const T pow10 = std::pow(T(10), int(std::floor(std::log10(std::abs(num))))); + const T norm = std::abs(num)/pow10; + static const int cleans[] = {1, 2, 5, 10}; + int clean = cleans[0]; + for (size_t i = 1; i < sizeof(cleans)/sizeof(cleans[0]); i++){ + if (std::abs(norm - cleans[i]) < std::abs(norm - clean)) + clean = cleans[i]; + } + return ((num < 0)? -1 : 1)*clean*pow10; + } + + //! Compute an FFT with pre-computed factors using Cooley-Tukey + template <typename T> std::complex<T> ct_fft_f( + const std::complex<T> *samps, size_t nsamps, + const std::complex<T> *factors, + size_t start = 0, size_t step = 1 + ){ + if (nsamps == 1) return samps[start]; + std::complex<T> E_k = ct_fft_f(samps, nsamps/2, factors+1, start, step*2); + std::complex<T> O_k = ct_fft_f(samps, nsamps/2, factors+1, start+step, step*2); + return E_k + factors[0]*O_k; + } + + //! Compute an FFT for a particular bin k using Cooley-Tukey + template <typename T> std::complex<T> ct_fft_k( + const std::complex<T> *samps, size_t nsamps, size_t k + ){ + //pre-compute the factors to use in Cooley-Tukey + std::vector<std::complex<T> > factors; + for (size_t N = nsamps; N != 0; N /= 2){ + factors.push_back(std::exp(std::complex<T>(0, T(-2*pi*k/N)))); + } + return ct_fft_f(samps, nsamps, &factors.front()); + } + + //! Helper class to build a DFT plot frame + class frame_type{ + public: + frame_type(size_t width, size_t height): + _frame(width-1, std::vector<char>(height, ' ')) + { + /* NOP */ + } + + //accessors to parts of the frame + char &get_plot(size_t b, size_t z){return _frame.at(b+albl_w).at(z+flbl_h);} + char &get_albl(size_t b, size_t z){return _frame.at(b) .at(z+flbl_h);} + char &get_ulbl(size_t b) {return _frame.at(b) .at(flbl_h-1);} + char &get_flbl(size_t b) {return _frame.at(b+albl_w).at(flbl_h-1);} + + //dimension accessors + size_t get_plot_h(void) const{return _frame.front().size() - flbl_h;} + size_t get_plot_w(void) const{return _frame.size() - albl_w;} + size_t get_albl_w(void) const{return albl_w;} + + std::string to_string(void){ + std::stringstream frame_ss; + for (size_t z = 0; z < _frame.front().size(); z++){ + for (size_t b = 0; b < _frame.size(); b++){ + frame_ss << _frame[b][_frame[b].size()-z-1]; + } + frame_ss << std::endl; + } + return frame_ss.str(); + } + + private: + static const size_t albl_w = 6, flbl_h = 1; + std::vector<std::vector<char> > _frame; + }; + +} //namespace /*anon*/ + +/*********************************************************************** + * Implementation code + **********************************************************************/ +namespace acsii_art_dft{ + + //! skip constants for amplitude and frequency labels + static const size_t albl_skip = 5, flbl_skip = 20; + + template <typename T> log_pwr_dft_type log_pwr_dft( + const std::complex<T> *samps, size_t nsamps + ){ + if (nsamps & (nsamps - 1)) + throw std::runtime_error("num samps is not a power of 2"); + + //compute the window + double win_pwr = 0; + std::vector<std::complex<T> > win_samps; + for(size_t n = 0; n < nsamps; n++){ + //double w_n = 1; + //double w_n = 0.54 //hamming window + // -0.46*std::cos(2*pi*n/(nsamps-1)) + //; + double w_n = 0.35875 //blackman-harris window + -0.48829*std::cos(2*pi*n/(nsamps-1)) + +0.14128*std::cos(4*pi*n/(nsamps-1)) + -0.01168*std::cos(6*pi*n/(nsamps-1)) + ; + //double w_n = 1 // flat top window + // -1.930*std::cos(2*pi*n/(nsamps-1)) + // +1.290*std::cos(4*pi*n/(nsamps-1)) + // -0.388*std::cos(6*pi*n/(nsamps-1)) + // +0.032*std::cos(8*pi*n/(nsamps-1)) + //; + win_samps.push_back(T(w_n)*samps[n]); + win_pwr += w_n*w_n; + } + + //compute the log-power dft + log_pwr_dft_type log_pwr_dft; + for(size_t k = 0; k < nsamps; k++){ + std::complex<T> dft_k = ct_fft_k(&win_samps.front(), nsamps, k); + log_pwr_dft.push_back(float( + + 20*std::log10(std::abs(dft_k)) + - 20*std::log10(T(nsamps)) + - 10*std::log10(win_pwr/nsamps) + + 3 + )); + } + + return log_pwr_dft; + } + + std::string dft_to_plot( + const log_pwr_dft_type &dft_, + size_t width, + size_t height, + double samp_rate, + double dc_freq, + float dyn_rng, + float ref_lvl + ){ + frame_type frame(width, height); //fill this frame + + //re-order the dft so dc in in the center + const size_t num_bins = dft_.size() - 1 + dft_.size()%2; //make it odd + log_pwr_dft_type dft(num_bins); + for (size_t n = 0; n < num_bins; n++){ + dft[n] = dft_[(n + num_bins/2)%num_bins]; + } + + //fill the plot with dft bins + for (size_t b = 0; b < frame.get_plot_w(); b++){ + //indexes from the dft to grab for the plot + const size_t n_start = std::max(iround(double(b-0.5)*(num_bins-1)/(frame.get_plot_w()-1)), 0); + const size_t n_stop = std::min(iround(double(b+0.5)*(num_bins-1)/(frame.get_plot_w()-1)), int(num_bins)); + + //calculate val as the max across points + float val = dft.at(n_start); + for (size_t n = n_start; n < n_stop; n++) val = std::max(val, dft.at(n)); + + const float scaled = (val - (ref_lvl - dyn_rng))*(frame.get_plot_h()-1)/dyn_rng; + for (size_t z = 0; z < frame.get_plot_h(); z++){ + static const std::string syms(".:!|"); + if (scaled-z > 1) frame.get_plot(b, z) = syms.at(syms.size()-1); + else if (scaled-z > 0) frame.get_plot(b, z) = syms.at(size_t((scaled-z)*syms.size())); + } + } + + //create vertical amplitude labels + const float db_step = to_clean_num(dyn_rng/(frame.get_plot_h()-1)*albl_skip); + for ( + float db = db_step*(int((ref_lvl - dyn_rng)/db_step)); + db <= db_step*(int(ref_lvl/db_step)); + db += db_step + ){ + const int z = iround((db - (ref_lvl - dyn_rng))*(frame.get_plot_h()-1)/dyn_rng); + if (z < 0 or size_t(z) >= frame.get_plot_h()) continue; + std::stringstream ss; ss << db; std::string lbl = ss.str(); + for (size_t i = 0; i < lbl.size() and i < frame.get_albl_w(); i++){ + frame.get_albl(i, z) = lbl[i]; + } + } + + //create vertical units label + std::string ulbl = "dBfs"; + for (size_t i = 0; i < ulbl.size(); i++){ + frame.get_ulbl(i+1) = ulbl[i]; + } + + //create horizontal frequency labels + const double f_step = to_clean_num(samp_rate/frame.get_plot_w()*flbl_skip); + for ( + double freq = f_step*int((-samp_rate/2/f_step)); + freq <= f_step*int((+samp_rate/2/f_step)); + freq += f_step + ){ + const int b = iround((freq + samp_rate/2)*(frame.get_plot_w()-1)/samp_rate); + std::stringstream ss; ss << (freq+dc_freq)/1e6 << "MHz"; std::string lbl = ss.str(); + if (b < int(lbl.size()/2) or b + lbl.size() - lbl.size()/2 >= frame.get_plot_w()) continue; + for (size_t i = 0; i < lbl.size(); i++){ + frame.get_flbl(b + i - lbl.size()/2) = lbl[i]; + } + } + + return frame.to_string(); + } +} //namespace ascii_dft + +#endif /*ASCII_ART_DFT_HPP*/ + +/* + +//example main function to test the dft + +#include <iostream> +#include <cstdlib> +#include <curses.h> + +int main(void){ + initscr(); + + while (true){ + clear(); + + std::vector<std::complex<float> > samples; + for(size_t i = 0; i < 512; i++){ + samples.push_back(std::complex<float>( + float(std::rand() - RAND_MAX/2)/(RAND_MAX)/4, + float(std::rand() - RAND_MAX/2)/(RAND_MAX)/4 + )); + samples[i] += 0.5*std::sin(i*3.14/2) + 0.7; + } + + acsii_art_dft::log_pwr_dft_type dft; + dft = acsii_art_dft::log_pwr_dft(&samples.front(), samples.size()); + + printw("%s", acsii_art_dft::dft_to_plot( + dft, COLS, LINES, + 12.5e4, 2.45e9, + 60, 0 + ).c_str()); + + sleep(1); + } + + + endwin(); + std::cout << "here\n"; + return 0; +} + +*/ + diff --git a/host/examples/benchmark_rx_rate.cpp b/host/examples/benchmark_rx_rate.cpp index 36611f97f..b189368f9 100644 --- a/host/examples/benchmark_rx_rate.cpp +++ b/host/examples/benchmark_rx_rate.cpp @@ -137,7 +137,6 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; uhd::usrp::single_usrp::sptr sdev = uhd::usrp::single_usrp::make(args); std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl; - sdev->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); //stop if left running if (not vm.count("rate")){ sdev->set_rx_rate(500e3); //initial rate diff --git a/host/examples/rx_ascii_art_dft.cpp b/host/examples/rx_ascii_art_dft.cpp new file mode 100644 index 000000000..5a24867b4 --- /dev/null +++ b/host/examples/rx_ascii_art_dft.cpp @@ -0,0 +1,143 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/single_usrp.hpp> +#include "ascii_art_dft.hpp" //implementation +#include <boost/program_options.hpp> +#include <boost/thread.hpp> //gets time +#include <boost/format.hpp> +#include <curses.h> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + size_t num_bins; + double rate, freq, frame_rate; + float gain, ref_lvl, dyn_rng; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + // hardware parameters + ("rate", po::value<double>(&rate), "rate of incoming samples (sps)") + ("freq", po::value<double>(&freq)->default_value(0), "RF center frequency in Hz") + ("gain", po::value<float>(&gain)->default_value(0), "gain for the RF chain") + // display parameters + ("num-bins", po::value<size_t>(&num_bins)->default_value(512), "the number of bins in the DFT") + ("frame-rate", po::value<double>(&frame_rate)->default_value(5), "frame rate of the display (fps)") + ("ref-lvl", po::value<float>(&ref_lvl)->default_value(0), "reference level for the display (dB)") + ("dyn-rng", po::value<float>(&dyn_rng)->default_value(60), "dynamic range for the display (dB)") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help") or not vm.count("rate")){ + std::cout << boost::format("UHD RX ASCII Art DFT %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::single_usrp::sptr sdev = uhd::usrp::single_usrp::make(args); + std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl; + + //set the rx sample rate + std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl; + sdev->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (sdev->get_rx_rate()/1e6) << std::endl << std::endl; + + //set the rx center frequency + std::cout << boost::format("Setting RX Freq: %f Mhz...") % (freq/1e6) << std::endl; + sdev->set_rx_freq(freq); + std::cout << boost::format("Actual RX Freq: %f Mhz...") % (sdev->get_rx_freq()/1e6) << std::endl << std::endl; + + //set the rx rf gain + std::cout << boost::format("Setting RX Gain: %f dB...") % gain << std::endl; + sdev->set_rx_gain(gain); + std::cout << boost::format("Actual RX Gain: %f dB...") % sdev->get_rx_gain() << std::endl << std::endl; + + //allocate recv buffer and metatdata + uhd::rx_metadata_t md; + std::vector<std::complex<float> > buff(num_bins); + //------------------------------------------------------------------ + //-- Initialize + //------------------------------------------------------------------ + initscr(); //curses init + sdev->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS); + boost::system_time next_refresh = boost::get_system_time(); + + //------------------------------------------------------------------ + //-- Main loop + //------------------------------------------------------------------ + while (true){ + //read a buffer's worth of samples every iteration + size_t num_rx_samps = sdev->get_device()->recv( + &buff.front(), buff.size(), md, + uhd::io_type_t::COMPLEX_FLOAT32, + uhd::device::RECV_MODE_FULL_BUFF + ); + if (num_rx_samps != buff.size()) continue; + + //check and update the display refresh condition + if (boost::get_system_time() < next_refresh) continue; + next_refresh = boost::get_system_time() + boost::posix_time::microseconds(long(1e6/frame_rate)); + + //calculate the dft and create the ascii art frame + acsii_art_dft::log_pwr_dft_type lpdft( + acsii_art_dft::log_pwr_dft(&buff.front(), num_rx_samps) + ); + std::string frame = acsii_art_dft::dft_to_plot( + lpdft, COLS, LINES, + sdev->get_rx_rate(), + sdev->get_rx_freq(), + dyn_rng, ref_lvl + ); + + //curses screen handling: clear and print frame + clear(); + printw("%s", frame.c_str()); + + //curses key handling: no timeout, any key to exit + timeout(0); + int ch = getch(); + if (ch != KEY_RESIZE and ch != ERR) break; + } + + //------------------------------------------------------------------ + //-- Cleanup + //------------------------------------------------------------------ + sdev->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); + endwin(); //curses done + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/test_async_messages.cpp b/host/examples/test_async_messages.cpp index 61db7ec04..b1d9d56d4 100644 --- a/host/examples/test_async_messages.cpp +++ b/host/examples/test_async_messages.cpp @@ -31,13 +31,13 @@ namespace po = boost::program_options; /*! - * Test the eob ack message: + * Test the burst ack message: * Send a burst of many samples that will fragment internally. - * We expect to get an eob ack async message. + * We expect to get an burst ack async message. */ -bool test_eob_ack_message(uhd::usrp::single_usrp::sptr sdev){ +bool test_burst_ack_message(uhd::usrp::single_usrp::sptr sdev){ uhd::device::sptr dev = sdev->get_device(); - std::cout << "Test eob ack message... " << std::flush; + std::cout << "Test burst ack message... " << std::flush; uhd::tx_metadata_t md; md.start_of_burst = true; @@ -63,10 +63,10 @@ bool test_eob_ack_message(uhd::usrp::single_usrp::sptr sdev){ } switch(async_md.event_code){ - case uhd::async_metadata_t::EVENT_CODE_EOB_ACK: + case uhd::async_metadata_t::EVENT_CODE_BURST_ACK: std::cout << boost::format( "success:\n" - " Got event code eob ack message.\n" + " Got event code burst ack message.\n" ) << std::endl; return true; @@ -222,8 +222,8 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //------------------------------------------------------------------ static const uhd::dict<std::string, boost::function<bool(uhd::usrp::single_usrp::sptr)> > tests = boost::assign::map_list_of - ("Test EOB ACK ", &test_eob_ack_message) - ("Test Underflow ", &test_underflow_message) + ("Test Burst ACK ", &test_burst_ack_message) + ("Test Underflow ", &test_underflow_message) ("Test Time Error", &test_time_error_message) ; diff --git a/host/include/uhd/types/CMakeLists.txt b/host/include/uhd/types/CMakeLists.txt index dbce21c98..a96976b5e 100644 --- a/host/include/uhd/types/CMakeLists.txt +++ b/host/include/uhd/types/CMakeLists.txt @@ -19,6 +19,7 @@ INSTALL(FILES clock_config.hpp device_addr.hpp + dict.ipp dict.hpp io_type.hpp mac_addr.hpp @@ -28,6 +29,7 @@ INSTALL(FILES serial.hpp stream_cmd.hpp time_spec.hpp + tune_request.hpp tune_result.hpp DESTINATION ${INCLUDE_DIR}/uhd/types ) diff --git a/host/include/uhd/types/dict.hpp b/host/include/uhd/types/dict.hpp index de96ea768..b14fc5425 100644 --- a/host/include/uhd/types/dict.hpp +++ b/host/include/uhd/types/dict.hpp @@ -19,11 +19,6 @@ #define INCLUDED_UHD_TYPES_DICT_HPP #include <uhd/config.hpp> -#include <boost/foreach.hpp> -#include <boost/format.hpp> -#include <boost/lexical_cast.hpp> -#include <stdexcept> -#include <typeinfo> #include <vector> #include <list> @@ -34,14 +29,10 @@ namespace uhd{ */ template <typename Key, typename Val> class dict{ public: - typedef std::pair<Key, Val> pair_t; - /*! * Create a new empty dictionary. */ - dict(void){ - /* NOP */ - } + dict(void); /*! * Input iterator constructor: @@ -50,64 +41,34 @@ namespace uhd{ * \param last the end iterator */ template <typename InputIterator> - dict(InputIterator first, InputIterator last){ - for(InputIterator it = first; it != last; it++){ - _map.push_back(*it); - } - } - - /*! - * Destroy this dict. - */ - ~dict(void){ - /* NOP */ - } + dict(InputIterator first, InputIterator last); /*! * Get the number of elements in this dict. * \return the number of elements */ - std::size_t size(void) const{ - return _map.size(); - } + std::size_t size(void) const; /*! * Get a list of the keys in this dict. * Key order depends on insertion precedence. * \return vector of keys */ - const std::vector<Key> keys(void) const{ - std::vector<Key> keys; - BOOST_FOREACH(const pair_t &p, _map){ - keys.push_back(p.first); - } - return keys; - } + const std::vector<Key> keys(void) const; /*! * Get a list of the values in this dict. * Value order depends on insertion precedence. * \return vector of values */ - const std::vector<Val> vals(void) const{ - std::vector<Val> vals; - BOOST_FOREACH(const pair_t &p, _map){ - vals.push_back(p.second); - } - return vals; - } + const std::vector<Val> vals(void) const; /*! * Does the dictionary contain this key? * \param key the key to look for * \return true if found */ - bool has_key(const Key &key) const{ - BOOST_FOREACH(const pair_t &p, _map){ - if (p.first == key) return true; - } - return false; - } + bool has_key(const Key &key) const; /*! * Get a value for the given key if it exists. @@ -116,15 +77,7 @@ namespace uhd{ * \return the value at the key * \throw an exception when not found */ - const Val &operator[](const Key &key) const{ - BOOST_FOREACH(const pair_t &p, _map){ - if (p.first == key) return p.second; - } - throw std::invalid_argument(str(boost::format( - "key \"%s\" not found in dict(%s, %s)" - ) % boost::lexical_cast<std::string>(key) - % typeid(Key).name() % typeid(Val).name())); - } + const Val &operator[](const Key &key) const; /*! * Set a value for the given key, however, in reality @@ -132,13 +85,7 @@ namespace uhd{ * \param key the key to set to * \return a reference to the value */ - Val &operator[](const Key &key){ - BOOST_FOREACH(pair_t &p, _map){ - if (p.first == key) return p.second; - } - _map.push_back(std::make_pair(key, Val())); - return _map.back().second; - } + Val &operator[](const Key &key); /*! * Pop an item out of the dictionary. @@ -146,16 +93,15 @@ namespace uhd{ * \return the value of the item * \throw an exception when not found */ - Val pop(const Key &key){ - Val val = (*this)[key]; - _map.remove(pair_t(key, val)); - return val; - } + Val pop(const Key &key); private: + typedef std::pair<Key, Val> pair_t; std::list<pair_t> _map; //private container }; } //namespace uhd +#include <uhd/types/dict.ipp> + #endif /* INCLUDED_UHD_TYPES_DICT_HPP */ diff --git a/host/include/uhd/types/dict.ipp b/host/include/uhd/types/dict.ipp new file mode 100644 index 000000000..85071e6fd --- /dev/null +++ b/host/include/uhd/types/dict.ipp @@ -0,0 +1,120 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_DICT_IPP +#define INCLUDED_UHD_TYPES_DICT_IPP + +#include <boost/foreach.hpp> +#include <boost/format.hpp> +#include <boost/lexical_cast.hpp> +#include <stdexcept> +#include <typeinfo> + +namespace uhd{ + + namespace /*anon*/{ + template<typename Key, typename Val> + struct UHD_API key_not_found: std::out_of_range{ + key_not_found(const Key &key): std::out_of_range( + str(boost::format( + "key \"%s\" not found in dict(%s, %s)" + ) % boost::lexical_cast<std::string>(key) + % typeid(Key).name() % typeid(Val).name() + ) + ){ + /* NOP */ + } + }; + } // namespace /*anon*/ + + template <typename Key, typename Val> + dict<Key, Val>::dict(void){ + /* NOP */ + } + + template <typename Key, typename Val> + template <typename InputIterator> + dict<Key, Val>::dict(InputIterator first, InputIterator last){ + for(InputIterator it = first; it != last; it++){ + _map.push_back(*it); + } + } + + template <typename Key, typename Val> + std::size_t dict<Key, Val>::size(void) const{ + return _map.size(); + } + + template <typename Key, typename Val> + const std::vector<Key> dict<Key, Val>::keys(void) const{ + std::vector<Key> keys; + BOOST_FOREACH(const pair_t &p, _map){ + keys.push_back(p.first); + } + return keys; + } + + template <typename Key, typename Val> + const std::vector<Val> dict<Key, Val>::vals(void) const{ + std::vector<Val> vals; + BOOST_FOREACH(const pair_t &p, _map){ + vals.push_back(p.second); + } + return vals; + } + + template <typename Key, typename Val> + bool dict<Key, Val>::has_key(const Key &key) const{ + BOOST_FOREACH(const pair_t &p, _map){ + if (p.first == key) return true; + } + return false; + } + + template <typename Key, typename Val> + const Val &dict<Key, Val>::operator[](const Key &key) const{ + BOOST_FOREACH(const pair_t &p, _map){ + if (p.first == key) return p.second; + } + throw key_not_found<Key, Val>(key); + } + + template <typename Key, typename Val> + Val &dict<Key, Val>::operator[](const Key &key){ + BOOST_FOREACH(pair_t &p, _map){ + if (p.first == key) return p.second; + } + _map.push_back(std::make_pair(key, Val())); + return _map.back().second; + } + + template <typename Key, typename Val> + Val dict<Key, Val>::pop(const Key &key){ + typename std::list<pair_t>::iterator it; + for (it = _map.begin(); it != _map.end(); it++){ + if (it->first == key){ + Val val = it->second; + _map.erase(it); + return val; + } + } + throw key_not_found<Key, Val>(key); + } + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_DICT_IPP */ diff --git a/host/include/uhd/types/metadata.hpp b/host/include/uhd/types/metadata.hpp index 96c4ad0d3..f4e084430 100644 --- a/host/include/uhd/types/metadata.hpp +++ b/host/include/uhd/types/metadata.hpp @@ -19,7 +19,6 @@ #define INCLUDED_UHD_TYPES_METADATA_HPP #include <uhd/config.hpp> -#include <boost/cstdint.hpp> #include <uhd/types/time_spec.hpp> namespace uhd{ @@ -30,58 +29,59 @@ namespace uhd{ * The receive routines will convert IF data headers into metadata. */ struct UHD_API rx_metadata_t{ - /*! - * Time specification: - * Set from timestamps on incoming data when provided. - */ + //! Has time specification? bool has_time_spec; + + //! Time of the first sample. time_spec_t time_spec; /*! - * Fragmentation flag and offset: + * Fragmentation flag: * Similar to IPv4 fragmentation: http://en.wikipedia.org/wiki/IPv4#Fragmentation_and_reassembly * More fragments is true when the input buffer has insufficient size to fit * an entire received packet. More fragments will be false for the last fragment. - * The fragment offset is the sample number at the start of the receive buffer. - * For non-fragmented receives, the fragment offset should always be zero. */ bool more_fragments; - size_t fragment_offset; /*! - * Burst flags: - * Start of burst will be true for the first packet in the chain. - * End of burst will be true for the last packet in the chain. + * Fragmentation offset: + * The fragment offset is the sample number at the start of the receive buffer. + * For non-fragmented receives, the fragment offset should always be zero. */ + size_t fragment_offset; + + //! Start of burst will be true for the first packet in the chain. bool start_of_burst; + + //! End of burst will be true for the last packet in the chain. bool end_of_burst; /*! - * Error conditions: - * - none: no error associated with this metadata - * - timeout: no packet received, underlying code timed-out - * - late command: a stream command was issued in the past - * - broken chain: expected another stream command - * - overflow: an internal receive buffer has filled - * - bad packet: the buffer was unrecognizable as a vrt packet + * The error condition on a receive call. * * Note: When an overrun occurs in continuous streaming mode, * the device will continue to send samples to the host. * For other streaming modes, streaming will discontinue * until the user issues a new stream command. * - * Note: The metadata fields have meaning for the following error codes: + * The metadata fields have meaning for the following error codes: * - none * - late command * - broken chain * - overflow */ enum error_code_t { + //! No error associated with this metadata. ERROR_CODE_NONE = 0x0, + //! No packet received, implementation timed-out. ERROR_CODE_TIMEOUT = 0x1, + //! A stream command was issued in the past. ERROR_CODE_LATE_COMMAND = 0x2, + //! Expected another stream command. ERROR_CODE_BROKEN_CHAIN = 0x4, + //! An internal receive buffer has filled. ERROR_CODE_OVERFLOW = 0x8, + //! The packet could not be parsed. ERROR_CODE_BAD_PACKET = 0xf } error_code; }; @@ -93,19 +93,19 @@ namespace uhd{ */ struct UHD_API tx_metadata_t{ /*! - * Time specification: - * Set has time spec to false to perform a send "now". - * Or, set to true, and fill in time spec for a send "at". + * Has time specification? + * - Set false to send immediately. + * - Set true to send at the time specified by time spec. */ bool has_time_spec; + + //! When to send the first sample. time_spec_t time_spec; - /*! - * Burst flags: - * Set start of burst to true for the first packet in the chain. - * Set end of burst to true for the last packet in the chain. - */ + //! Set start of burst to true for the first packet in the chain. bool start_of_burst; + + //! Set end of burst to true for the last packet in the chain. bool end_of_burst; /*! @@ -122,27 +122,27 @@ namespace uhd{ //! The channel number in a mimo configuration size_t channel; - /*! - * Time specification: when the async event occurred. - */ + //! Has time specification? bool has_time_spec; + + //! When the async event occurred. time_spec_t time_spec; /*! - * Event codes: - * - eob ack: an eob packet was successfully transmitted - * - underflow: an internal send buffer has emptied - * - sequence error: packet loss between host and device - * - time error: packet had time that was late (or too early) - * - underflow in packet: underflow occurred inside a packet - * - sequence error in burst: packet loss within a burst + * The type of event for a receive async message call. */ enum event_code_t { - EVENT_CODE_EOB_ACK = 0x1, + //! A burst was successfully transmitted. + EVENT_CODE_BURST_ACK = 0x1, + //! An internal send buffer has emptied. EVENT_CODE_UNDERFLOW = 0x2, + //! Packet loss between host and device. EVENT_CODE_SEQ_ERROR = 0x4, + //! Packet had time that was late (or too early). EVENT_CODE_TIME_ERROR = 0x8, + //! Underflow occurred inside a packet. EVENT_CODE_UNDERFLOW_IN_PACKET = 0x10, + //! Packet loss within a burst. EVENT_CODE_SEQ_ERROR_IN_BURST = 0x20 } event_code; }; diff --git a/host/include/uhd/types/tune_request.hpp b/host/include/uhd/types/tune_request.hpp new file mode 100644 index 000000000..942b93251 --- /dev/null +++ b/host/include/uhd/types/tune_request.hpp @@ -0,0 +1,95 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_TUNE_REQUEST_HPP +#define INCLUDED_UHD_TYPES_TUNE_REQUEST_HPP + +#include <uhd/config.hpp> + +namespace uhd{ + + /*! + * A tune request instructs the implementation how to tune the RF chain. + * The policies can be used to select automatic tuning or + * fined control over the daughterboard IF and DSP tuning. + * Not all combinations of policies are applicable. + * Convenience constructors are supplied for most use cases. + */ + struct UHD_API tune_request_t{ + /*! + * Make a new tune request for a particular center frequency. + * Use an automatic policy for the intermediate and DSP frequency + * to tune the chain as close as possible to the target frequency. + * \param target_freq the target frequency in Hz + */ + tune_request_t(double target_freq = 0); + + /*! + * Make a new tune request for a particular center frequency. + * Use a manual policy for the intermediate frequency, + * and an automatic policy for the DSP frequency, + * to tune the chain as close as possible to the target frequency. + * \param target_freq the target frequency in Hz + * \param lo_off the LO offset frequency in Hz + */ + tune_request_t(double target_freq, double lo_off); + + //! Policy options for tunable elements in the RF chain. + enum policy_t { + //! Do not set this argument, use current setting. + POLICY_NONE = 'N', + //! Automatically determine the argument's value. + POLICY_AUTO = 'A', + //! Use the argument's value for the setting. + POLICY_MANUAL = 'M' + }; + + /*! + * The target frequency of the overall chain in Hz. + * Set this even if all policies are set to manual. + */ + double target_freq; + + /*! + * The policy for the intermediate frequency. + * Automatic behavior: the target frequency + default LO offset. + */ + policy_t inter_freq_policy; + + /*! + * The intermediate frequency in Hz. + * Set when the policy is set to manual. + */ + double inter_freq; + + /*! + * The policy for the DSP frequency. + * Automatic behavior: the difference between the target and IF. + */ + policy_t dsp_freq_policy; + + /*! + * The DSP frequency in Hz. + * Set when the policy is set to manual. + */ + double dsp_freq; + + }; + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_TUNE_REQUEST_HPP */ diff --git a/host/include/uhd/usrp/mimo_usrp.hpp b/host/include/uhd/usrp/mimo_usrp.hpp index 78833e24e..a2092f04f 100644 --- a/host/include/uhd/usrp/mimo_usrp.hpp +++ b/host/include/uhd/usrp/mimo_usrp.hpp @@ -127,7 +127,7 @@ public: virtual double get_rx_rate_all(void) = 0; virtual tune_result_t set_rx_freq(size_t chan, double freq) = 0; - virtual tune_result_t set_rx_freq(size_t chan, double freq, double lo_off) = 0; + //virtual tune_result_t set_rx_freq(size_t chan, double freq, double lo_off) = 0; virtual double get_rx_freq(size_t chan) = 0; virtual freq_range_t get_rx_freq_range(size_t chan) = 0; @@ -161,7 +161,7 @@ public: virtual double get_tx_rate_all(void) = 0; virtual tune_result_t set_tx_freq(size_t chan, double freq) = 0; - virtual tune_result_t set_tx_freq(size_t chan, double freq, double lo_off) = 0; + //virtual tune_result_t set_tx_freq(size_t chan, double freq, double lo_off) = 0; virtual double get_tx_freq(size_t chan) = 0; virtual freq_range_t get_tx_freq_range(size_t chan) = 0; @@ -298,7 +298,7 @@ public: time_spec_t time_0 = _mboard(0)[MBOARD_PROP_TIME_NOW].as<time_spec_t>(); time_spec_t time_i = _mboard(chan)[MBOARD_PROP_TIME_NOW].as<time_spec_t>(); if (time_i < time_0 or (time_i - time_0) > time_spec_t(0.01)){ //10 ms: greater than RTT but not too big - uhd::print_warning(str(boost::format( + uhd::warning::post(str(boost::format( "Detected time deviation between board %d and board 0.\n" "Board 0 time is %f seconds.\n" "Board %d time is %f seconds.\n" @@ -345,9 +345,9 @@ public: return tune_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(chan), 0, target_freq); } - tune_result_t set_rx_freq(size_t chan, double target_freq, double lo_off){ - return tune_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(chan), 0, target_freq, lo_off); - } + //tune_result_t set_rx_freq(size_t chan, double target_freq, double lo_off){ + // return tune_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(chan), 0, target_freq, lo_off); + //} double get_rx_freq(size_t chan){ return derive_freq_from_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(chan), 0); @@ -425,9 +425,9 @@ public: return tune_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(chan), 0, target_freq); } - tune_result_t set_tx_freq(size_t chan, double target_freq, double lo_off){ - return tune_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(chan), 0, target_freq, lo_off); - } + //tune_result_t set_tx_freq(size_t chan, double target_freq, double lo_off){ + // return tune_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(chan), 0, target_freq, lo_off); + //} double get_tx_freq(size_t chan){ return derive_freq_from_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(chan), 0); @@ -512,7 +512,7 @@ namespace uhd{ namespace usrp{ * The Make Function **********************************************************************/ inline mimo_usrp::sptr mimo_usrp::make(const device_addr_t &dev_addr){ - uhd::print_warning( + uhd::warning::post( "The mimo USRP interface has been deprecated.\n" "Please switch to the multi USRP interface.\n" "#include <uhd/usrp/multi_usrp.hpp>\n" diff --git a/host/include/uhd/usrp/multi_usrp.hpp b/host/include/uhd/usrp/multi_usrp.hpp index 2f71f80b1..98ba07fc0 100644 --- a/host/include/uhd/usrp/multi_usrp.hpp +++ b/host/include/uhd/usrp/multi_usrp.hpp @@ -23,6 +23,7 @@ #include <uhd/types/ranges.hpp> #include <uhd/types/stream_cmd.hpp> #include <uhd/types/clock_config.hpp> +#include <uhd/types/tune_request.hpp> #include <uhd/types/tune_result.hpp> #include <uhd/usrp/subdev_spec.hpp> #include <uhd/usrp/dboard_iface.hpp> @@ -144,6 +145,14 @@ public: virtual void set_time_unknown_pps(const time_spec_t &time_spec) = 0; /*! + * Are the times across all motherboards in this configuration synchronized? + * Checks that all time registers are approximately close but not exact, + * given that the RTT may varying for a control packet transaction. + * \return true when all motherboards time registers are in sync + */ + virtual bool get_time_synchronized(void) = 0; + + /*! * Issue a stream command to the usrp device. * This tells the usrp to send samples into the host. * See the documentation for stream_cmd_t for more info. @@ -213,20 +222,13 @@ public: /*! * Set the RX center frequency. - * \param freq the frequency in Hz + * \param tune_request tune request instructions * \param chan the channel index 0 to N-1 * \return a tune result object */ - virtual tune_result_t set_rx_freq(double freq, size_t chan) = 0; - - /*! - * Set the RX center frequency. - * \param freq the frequency in Hz - * \param lo_off an LO offset in Hz - * \param chan the channel index 0 to N-1 - * \return a tune result object - */ - virtual tune_result_t set_rx_freq(double freq, double lo_off, size_t chan) = 0; + virtual tune_result_t set_rx_freq( + const tune_request_t &tune_request, size_t chan = 0 + ) = 0; /*! * Get the RX center frequency. @@ -399,20 +401,13 @@ public: /*! * Set the TX center frequency. - * \param freq the frequency in Hz - * \param chan the channel index 0 to N-1 - * \return a tune result object - */ - virtual tune_result_t set_tx_freq(double freq, size_t chan) = 0; - - /*! - * Set the TX center frequency. - * \param freq the frequency in Hz - * \param lo_off an LO offset in Hz + * \param tune_request tune request instructions * \param chan the channel index 0 to N-1 * \return a tune result object */ - virtual tune_result_t set_tx_freq(double freq, double lo_off, size_t chan) = 0; + virtual tune_result_t set_tx_freq( + const tune_request_t &tune_request, size_t chan = 0 + ) = 0; /*! * Get the TX center frequency. diff --git a/host/include/uhd/usrp/simple_usrp.hpp b/host/include/uhd/usrp/simple_usrp.hpp index 22f4d64ba..77416dbbd 100644 --- a/host/include/uhd/usrp/simple_usrp.hpp +++ b/host/include/uhd/usrp/simple_usrp.hpp @@ -117,7 +117,7 @@ public: virtual double get_rx_rate(void) = 0; virtual tune_result_t set_rx_freq(double freq) = 0; - virtual tune_result_t set_rx_freq(double freq, double lo_off) = 0; + //virtual tune_result_t set_rx_freq(double freq, double lo_off) = 0; virtual double get_rx_freq(void) = 0; virtual freq_range_t get_rx_freq_range(void) = 0; @@ -152,7 +152,7 @@ public: virtual double get_tx_rate(void) = 0; virtual tune_result_t set_tx_freq(double freq) = 0; - virtual tune_result_t set_tx_freq(double freq, double lo_off) = 0; + //virtual tune_result_t set_tx_freq(double freq, double lo_off) = 0; virtual double get_tx_freq(void) = 0; virtual freq_range_t get_tx_freq_range(void) = 0; @@ -243,9 +243,9 @@ public: return _sdev->set_rx_freq(target_freq); } - tune_result_t set_rx_freq(double target_freq, double lo_off){ - return _sdev->set_rx_freq(target_freq, lo_off); - } + //tune_result_t set_rx_freq(double target_freq, double lo_off){ + // return _sdev->set_rx_freq(target_freq, lo_off); + //} double get_rx_freq(void){ return _sdev->get_rx_freq(); @@ -318,9 +318,9 @@ public: return _sdev->set_tx_freq(target_freq); } - tune_result_t set_tx_freq(double target_freq, double lo_off){ - return _sdev->set_tx_freq(target_freq, lo_off); - } + //tune_result_t set_tx_freq(double target_freq, double lo_off){ + // return _sdev->set_tx_freq(target_freq, lo_off); + //} double get_tx_freq(void){ return _sdev->get_tx_freq(); @@ -374,7 +374,7 @@ namespace uhd{ namespace usrp{ * The Make Function **********************************************************************/ inline simple_usrp::sptr simple_usrp::make(const device_addr_t &dev_addr){ - uhd::print_warning( + uhd::warning::post( "The simple USRP interface has been deprecated.\n" "Please switch to the single USRP interface.\n" "#include <uhd/usrp/single_usrp.hpp>\n" diff --git a/host/include/uhd/usrp/single_usrp.hpp b/host/include/uhd/usrp/single_usrp.hpp index a068fbed8..26303fe10 100644 --- a/host/include/uhd/usrp/single_usrp.hpp +++ b/host/include/uhd/usrp/single_usrp.hpp @@ -23,6 +23,7 @@ #include <uhd/types/ranges.hpp> #include <uhd/types/stream_cmd.hpp> #include <uhd/types/clock_config.hpp> +#include <uhd/types/tune_request.hpp> #include <uhd/types/tune_result.hpp> #include <uhd/usrp/subdev_spec.hpp> #include <uhd/usrp/dboard_iface.hpp> @@ -154,20 +155,13 @@ public: /*! * Set the RX center frequency. - * \param freq the frequency in Hz + * \param tune_request tune request instructions * \param chan the channel index 0 to N-1 * \return a tune result object */ - virtual tune_result_t set_rx_freq(double freq, size_t chan = 0) = 0; - - /*! - * Set the RX center frequency. - * \param freq the frequency in Hz - * \param lo_off an LO offset in Hz - * \param chan the channel index 0 to N-1 - * \return a tune result object - */ - virtual tune_result_t set_rx_freq(double freq, double lo_off, size_t chan = 0) = 0; + virtual tune_result_t set_rx_freq( + const tune_request_t &tune_request, size_t chan = 0 + ) = 0; /*! * Get the RX center frequency. @@ -330,20 +324,13 @@ public: /*! * Set the TX center frequency. - * \param freq the frequency in Hz - * \param chan the channel index 0 to N-1 - * \return a tune result object - */ - virtual tune_result_t set_tx_freq(double freq, size_t chan = 0) = 0; - - /*! - * Set the TX center frequency. - * \param freq the frequency in Hz - * \param lo_off an LO offset in Hz + * \param tune_request tune request instructions * \param chan the channel index 0 to N-1 * \return a tune result object */ - virtual tune_result_t set_tx_freq(double freq, double lo_off, size_t chan = 0) = 0; + virtual tune_result_t set_tx_freq( + const tune_request_t &tune_request, size_t chan = 0 + ) = 0; /*! * Get the TX center frequency. diff --git a/host/include/uhd/usrp/subdev_spec.hpp b/host/include/uhd/usrp/subdev_spec.hpp index 5de3bb3b8..b189724c9 100644 --- a/host/include/uhd/usrp/subdev_spec.hpp +++ b/host/include/uhd/usrp/subdev_spec.hpp @@ -26,10 +26,10 @@ namespace uhd{ namespace usrp{ /*! - * A subdevice specification (daughterboard, subdevice) name pairing. + * A subdevice specification (daughterboard slot, subdevice) name pairing. */ struct UHD_API subdev_spec_pair_t : boost::equality_comparable<subdev_spec_pair_t>{ - //! The daughterboard name + //! The daughterboard slot name std::string db_name; //! The subdevice name @@ -50,7 +50,7 @@ namespace uhd{ namespace usrp{ UHD_API bool operator==(const subdev_spec_pair_t &, const subdev_spec_pair_t &); /*! - * A list of (daughterboard name, subdevice name) pairs: + * A list of (daughterboard slot name, subdevice name) pairs: * * A subdevice specification represents a list of subdevices on a motherboard. * The subdevices specified may span across multiple daughterboards; @@ -62,6 +62,11 @@ namespace uhd{ namespace usrp{ * The markup-string is a whitespace separated list of dboard:subdev pairs. * The first pair represents the subdevice for channel zero, * the second pair represents the subdevice for channel one, and so on. + * + * Special handling for empty conditions: + * - An empty subdevice specification means: select the first subdevice found in the configuration + * - An empty daughterboard name means: select the only daughterboard slot or error if multiple exist + * - An empty subdevice name means: select the only subdevice on that board or error if multiple exist */ class UHD_API subdev_spec_t : public std::vector<subdev_spec_pair_t>{ public: diff --git a/host/include/uhd/usrp/tune_helper.hpp b/host/include/uhd/usrp/tune_helper.hpp index ec133fa08..db12241c1 100644 --- a/host/include/uhd/usrp/tune_helper.hpp +++ b/host/include/uhd/usrp/tune_helper.hpp @@ -20,6 +20,7 @@ #include <uhd/config.hpp> #include <uhd/wax.hpp> +#include <uhd/types/tune_request.hpp> #include <uhd/types/tune_result.hpp> namespace uhd{ namespace usrp{ @@ -32,23 +33,12 @@ namespace uhd{ namespace usrp{ * \param subdev the dboard subdevice object with properties * \param ddc the mboard dsp object with properties * \param chan the channel of the dsp to tune - * \param target_freq the desired center frequency - * \param lo_offset an offset for the subdevice IF from center + * \param tune_request tune request instructions * \return a tune result struct */ UHD_API tune_result_t tune_rx_subdev_and_dsp( wax::obj subdev, wax::obj ddc, size_t chan, - double target_freq, double lo_offset - ); - - /*! - * Tune a rx chain to the desired frequency: - * Same as the above, except the LO offset - * is calculated based on the subdevice and BW. - */ - UHD_API tune_result_t tune_rx_subdev_and_dsp( - wax::obj subdev, wax::obj ddc, - size_t chan, double target_freq + const tune_request_t &tune_request ); /*! @@ -70,23 +60,12 @@ namespace uhd{ namespace usrp{ * \param subdev the dboard subdevice object with properties * \param duc the mboard dsp object with properties * \param chan the channel of the dsp to tune - * \param target_freq the desired center frequency - * \param lo_offset an offset for the subdevice IF from center + * \param tune_request tune request instructions * \return a tune result struct */ UHD_API tune_result_t tune_tx_subdev_and_dsp( wax::obj subdev, wax::obj duc, size_t chan, - double target_freq, double lo_offset - ); - - /*! - * Tune a tx chain to the desired frequency: - * Same as the above, except the LO offset - * is calculated based on the subdevice and BW. - */ - UHD_API tune_result_t tune_tx_subdev_and_dsp( - wax::obj subdev, wax::obj duc, - size_t chan, double target_freq + const tune_request_t &tune_request ); /*! diff --git a/host/include/uhd/utils/warning.hpp b/host/include/uhd/utils/warning.hpp index 91d8400ab..a1e3f0d1e 100644 --- a/host/include/uhd/utils/warning.hpp +++ b/host/include/uhd/utils/warning.hpp @@ -19,16 +19,44 @@ #define INCLUDED_UHD_UTILS_WARNING_HPP #include <uhd/config.hpp> +#include <boost/function.hpp> +#include <vector> #include <string> -namespace uhd{ +namespace uhd{ namespace warning{ + + //! Callback function type for a message handler + typedef boost::function<void(std::string)> handler_t; /*! - * Print a formatted warning string to stderr. + * Post a warning message to all registered handlers. * \param msg the multiline warning message */ - UHD_API void print_warning(const std::string &msg); + UHD_API void post(const std::string &msg); + + /*! + * Register a new handler with this name. + * If the name was already registered for this name, + * the old registered handler will be replaced. + * \param name a unique name for this handler + * \param handler the callback handler function + */ + UHD_API void register_handler(const std::string &name, const handler_t &handler); + + /*! + * Unregister a handler for this name. + * \param name a unique name for a registered handler + * \return the handler that was registered + * \throw error when the name was not found in the registry + */ + UHD_API handler_t unregister_handler(const std::string &name); + + /*! + * Get a list of registered handler names. + * \return a vector of unique string names + */ + UHD_API const std::vector<std::string> registry_names(void); -} //namespace uhd +}} //namespace uhd::warning #endif /* INCLUDED_UHD_UTILS_WARNING_HPP */ diff --git a/host/lib/transport/udp_zero_copy_asio.cpp b/host/lib/transport/udp_zero_copy_asio.cpp index 938ae4473..c758fa894 100644 --- a/host/lib/transport/udp_zero_copy_asio.cpp +++ b/host/lib/transport/udp_zero_copy_asio.cpp @@ -345,7 +345,7 @@ template<typename Opt> static void resize_buff_helper( else std::cout << boost::format( "Current %s sock buff size: %d bytes" ) % name % actual_size << std::endl; - if (actual_size < target_size) uhd::print_warning(str(boost::format( + if (actual_size < target_size) uhd::warning::post(str(boost::format( "The %s buffer is smaller than the requested size.\n" "The minimum recommended buffer size is %d bytes.\n" "See the transport application notes on buffer resizing.\n%s" diff --git a/host/lib/types.cpp b/host/lib/types.cpp index 6aa82b012..4188568aa 100644 --- a/host/lib/types.cpp +++ b/host/lib/types.cpp @@ -17,6 +17,7 @@ #include <uhd/utils/assert.hpp> #include <uhd/types/ranges.hpp> +#include <uhd/types/tune_request.hpp> #include <uhd/types/tune_result.hpp> #include <uhd/types/clock_config.hpp> #include <uhd/types/stream_cmd.hpp> @@ -58,6 +59,26 @@ freq_range_t::freq_range_t(double min, double max): } /*********************************************************************** + * tune request + **********************************************************************/ +tune_request_t::tune_request_t(double target_freq): + target_freq(target_freq), + inter_freq_policy(POLICY_AUTO), + dsp_freq_policy(POLICY_AUTO) +{ + /* NOP */ +} + +tune_request_t::tune_request_t(double target_freq, double lo_off): + target_freq(target_freq), + inter_freq_policy(POLICY_MANUAL), + inter_freq(target_freq + lo_off), + dsp_freq_policy(POLICY_AUTO) +{ + /* NOP */ +} + +/*********************************************************************** * tune result **********************************************************************/ std::string tune_result_t::to_pp_string(void) const{ diff --git a/host/lib/usrp/dboard/db_basic_and_lf.cpp b/host/lib/usrp/dboard/db_basic_and_lf.cpp index c58d0e326..7d0146ef0 100644 --- a/host/lib/usrp/dboard/db_basic_and_lf.cpp +++ b/host/lib/usrp/dboard/db_basic_and_lf.cpp @@ -20,6 +20,7 @@ #include <uhd/types/ranges.hpp> #include <uhd/utils/assert.hpp> #include <uhd/utils/static.hpp> +#include <uhd/utils/warning.hpp> #include <uhd/usrp/dboard_base.hpp> #include <uhd/usrp/dboard_manager.hpp> #include <boost/assign/list_of.hpp> @@ -68,11 +69,11 @@ static const uhd::dict<std::string, subdev_conn_t> sd_name_to_conn = map_list_of * Register the basic and LF dboards **********************************************************************/ static dboard_base::sptr make_basic_rx(dboard_base::ctor_args_t args){ - return dboard_base::sptr(new basic_rx(args, 90e9)); + return dboard_base::sptr(new basic_rx(args, 250e6)); } static dboard_base::sptr make_basic_tx(dboard_base::ctor_args_t args){ - return dboard_base::sptr(new basic_tx(args, 90e9)); + return dboard_base::sptr(new basic_tx(args, 250e6)); } static dboard_base::sptr make_lf_rx(dboard_base::ctor_args_t args){ @@ -166,6 +167,10 @@ void basic_rx::rx_get(const wax::obj &key_, wax::obj &val){ val = true; //there is no LO, so it must be true! return; + case SUBDEV_PROP_BANDWIDTH: + val = 2*_max_freq; //we want complex double-sided + return; + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -190,6 +195,14 @@ void basic_rx::rx_set(const wax::obj &key_, const wax::obj &val){ case SUBDEV_PROP_ENABLED: return; //always enabled + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("%s: No tunable bandwidth, fixed filtered to %0.2fMHz") + % get_rx_id().to_pp_string() % _max_freq + ) + ); + return; + default: UHD_THROW_PROP_SET_ERROR(); } } @@ -265,6 +278,10 @@ void basic_tx::tx_get(const wax::obj &key_, wax::obj &val){ val = true; //there is no LO, so it must be true! return; + case SUBDEV_PROP_BANDWIDTH: + val = 2*_max_freq; //we want complex double-sided + return; + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -289,6 +306,14 @@ void basic_tx::tx_set(const wax::obj &key_, const wax::obj &val){ case SUBDEV_PROP_ENABLED: return; //always enabled + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("%s: No tunable bandwidth, fixed filtered to %0.2fMHz") + % get_tx_id().to_pp_string() % _max_freq + ) + ); + return; + default: UHD_THROW_PROP_SET_ERROR(); } } diff --git a/host/lib/usrp/dboard/db_dbsrx.cpp b/host/lib/usrp/dboard/db_dbsrx.cpp index 8ec87a4f7..aa3eeb6b5 100644 --- a/host/lib/usrp/dboard/db_dbsrx.cpp +++ b/host/lib/usrp/dboard/db_dbsrx.cpp @@ -175,7 +175,7 @@ UHD_STATIC_BLOCK(reg_dbsrx_dboard){ dbsrx::dbsrx(ctor_args_t args) : rx_dboard_base(args){ //warn user about incorrect DBID on USRP1, requires R193 populated if (this->get_iface()->get_special_props().soft_clock_divider and this->get_rx_id() == 0x000D) - uhd::print_warning( + uhd::warning::post( str(boost::format( "DBSRX: incorrect dbid\n" "Expected dbid 0x0002 and R193\n" @@ -186,7 +186,7 @@ dbsrx::dbsrx(ctor_args_t args) : rx_dboard_base(args){ //warn user about incorrect DBID on non-USRP1, requires R194 populated if (not this->get_iface()->get_special_props().soft_clock_divider and this->get_rx_id() == 0x0002) - uhd::print_warning( + uhd::warning::post( str(boost::format( "DBSRX: incorrect dbid\n" "Expected dbid 0x000D and R194\n" @@ -342,7 +342,7 @@ void dbsrx::set_lo_freq(double target_freq){ //vtune is too low, try lower frequency vco if (_max2118_read_regs.adc == 0){ if (_max2118_write_regs.osc_band == 0){ - uhd::print_warning( + uhd::warning::post( str(boost::format( "DBSRX: Tuning exceeded vco range, _max2118_write_regs.osc_band == %d\n" ) % int(_max2118_write_regs.osc_band)) @@ -356,7 +356,7 @@ void dbsrx::set_lo_freq(double target_freq){ //vtune is too high, try higher frequency vco if (_max2118_read_regs.adc == 7){ if (_max2118_write_regs.osc_band == 7){ - uhd::print_warning( + uhd::warning::post( str(boost::format( "DBSRX: Tuning exceeded vco range, _max2118_write_regs.osc_band == %d\n" ) % int(_max2118_write_regs.osc_band)) @@ -566,7 +566,7 @@ void dbsrx::rx_get(const wax::obj &key_, wax::obj &val){ return; case SUBDEV_PROP_BANDWIDTH: - val = _bandwidth; + val = 2*_bandwidth; //_bandwidth is low-pass, we want complex double-sided return; default: UHD_THROW_PROP_GET_ERROR(); @@ -591,7 +591,7 @@ void dbsrx::rx_set(const wax::obj &key_, const wax::obj &val){ return; //always enabled case SUBDEV_PROP_BANDWIDTH: - this->set_bandwidth(val.as<double>()); + this->set_bandwidth(val.as<double>()/2.0); //complex double-sided, we want low-pass return; default: UHD_THROW_PROP_SET_ERROR(); diff --git a/host/lib/usrp/dboard/db_rfx.cpp b/host/lib/usrp/dboard/db_rfx.cpp index 3c24d90db..12e458d8c 100644 --- a/host/lib/usrp/dboard/db_rfx.cpp +++ b/host/lib/usrp/dboard/db_rfx.cpp @@ -43,6 +43,7 @@ #include <uhd/utils/assert.hpp> #include <uhd/utils/static.hpp> #include <uhd/utils/algorithm.hpp> +#include <uhd/utils/warning.hpp> #include <uhd/usrp/dboard_id.hpp> #include <uhd/usrp/dboard_base.hpp> #include <uhd/usrp/dboard_manager.hpp> @@ -456,6 +457,10 @@ void rfx_xcvr::rx_get(const wax::obj &key_, wax::obj &val){ val = this->get_locked(dboard_iface::UNIT_RX); return; + case SUBDEV_PROP_BANDWIDTH: + val = 2*20.0e6; //30MHz low-pass, we want complex double-sided + return; + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -481,6 +486,12 @@ void rfx_xcvr::rx_set(const wax::obj &key_, const wax::obj &val){ case SUBDEV_PROP_ENABLED: return; //always enabled + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("RFX: No tunable bandwidth, fixed filtered to 40MHz")) + ); + return; + default: UHD_THROW_PROP_SET_ERROR(); } } @@ -543,6 +554,10 @@ void rfx_xcvr::tx_get(const wax::obj &key_, wax::obj &val){ val = this->get_locked(dboard_iface::UNIT_TX); return; + case SUBDEV_PROP_BANDWIDTH: + val = 2*20.0e6; //30MHz low-pass, we want complex double-sided + return; + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -568,6 +583,12 @@ void rfx_xcvr::tx_set(const wax::obj &key_, const wax::obj &val){ case SUBDEV_PROP_ENABLED: return; //always enabled + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("RFX: No tunable bandwidth, fixed filtered to 40MHz")) + ); + return; + default: UHD_THROW_PROP_SET_ERROR(); } } diff --git a/host/lib/usrp/dboard/db_tvrx.cpp b/host/lib/usrp/dboard/db_tvrx.cpp index d39dc3bf8..1f3c76556 100644 --- a/host/lib/usrp/dboard/db_tvrx.cpp +++ b/host/lib/usrp/dboard/db_tvrx.cpp @@ -459,6 +459,10 @@ void tvrx::rx_get(const wax::obj &key_, wax::obj &val){ val = true; return; + case SUBDEV_PROP_BANDWIDTH: + val = 6.0e6; //30MHz low-pass, we want complex double-sided + return; + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -479,6 +483,12 @@ void tvrx::rx_set(const wax::obj &key_, const wax::obj &val){ case SUBDEV_PROP_ENABLED: return; //always enabled + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("TVRX: No tunable bandwidth, fixed filtered to 6MHz")) + ); + return; + default: UHD_THROW_PROP_SET_ERROR(); } } diff --git a/host/lib/usrp/dboard/db_unknown.cpp b/host/lib/usrp/dboard/db_unknown.cpp index ec7ab440b..a342471c4 100644 --- a/host/lib/usrp/dboard/db_unknown.cpp +++ b/host/lib/usrp/dboard/db_unknown.cpp @@ -19,6 +19,7 @@ #include <uhd/types/ranges.hpp> #include <uhd/utils/assert.hpp> #include <uhd/utils/static.hpp> +#include <uhd/utils/warning.hpp> #include <uhd/usrp/dboard_base.hpp> #include <uhd/usrp/dboard_manager.hpp> #include <boost/assign/list_of.hpp> @@ -134,6 +135,10 @@ void unknown_rx::rx_get(const wax::obj &key_, wax::obj &val){ val = true; //there is no LO, so it must be true! return; + case SUBDEV_PROP_BANDWIDTH: + val = 0.0; + return; + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -158,12 +163,18 @@ void unknown_rx::rx_set(const wax::obj &key_, const wax::obj &val){ case SUBDEV_PROP_ENABLED: return; //always enabled + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("Unknown Daughterboard: No tunable bandwidth, fixed filtered to 0.0MHz")) + ); + return; + default: UHD_THROW_PROP_SET_ERROR(); } } /*********************************************************************** - * Basic and LF TX dboard + * Unknown TX dboard **********************************************************************/ unknown_tx::unknown_tx(ctor_args_t args) : tx_dboard_base(args){ /* NOP */ @@ -230,6 +241,10 @@ void unknown_tx::tx_get(const wax::obj &key_, wax::obj &val){ val = true; //there is no LO, so it must be true! return; + case SUBDEV_PROP_BANDWIDTH: + val = 0.0; + return; + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -254,6 +269,12 @@ void unknown_tx::tx_set(const wax::obj &key_, const wax::obj &val){ case SUBDEV_PROP_ENABLED: return; //always enabled + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("Unknown Daughterboard: No tunable bandwidth, fixed filtered to 0.0MHz")) + ); + return; + default: UHD_THROW_PROP_SET_ERROR(); } } diff --git a/host/lib/usrp/dboard/db_wbx.cpp b/host/lib/usrp/dboard/db_wbx.cpp index 907268aac..647f1b975 100644 --- a/host/lib/usrp/dboard/db_wbx.cpp +++ b/host/lib/usrp/dboard/db_wbx.cpp @@ -71,6 +71,7 @@ #include <uhd/utils/assert.hpp> #include <uhd/utils/static.hpp> #include <uhd/utils/algorithm.hpp> +#include <uhd/utils/warning.hpp> #include <uhd/usrp/dboard_base.hpp> #include <uhd/usrp/dboard_manager.hpp> #include <boost/assign/list_of.hpp> @@ -525,6 +526,10 @@ void wbx_xcvr::rx_get(const wax::obj &key_, wax::obj &val){ val = this->get_locked(dboard_iface::UNIT_RX); return; + case SUBDEV_PROP_BANDWIDTH: + val = 2*30.0e6; //20MHz low-pass, we want complex double-sided + return; + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -550,6 +555,12 @@ void wbx_xcvr::rx_set(const wax::obj &key_, const wax::obj &val){ case SUBDEV_PROP_ENABLED: return; //always enabled + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("WBX: No tunable bandwidth, fixed filtered to 40MHz")) + ); + return; + default: UHD_THROW_PROP_SET_ERROR(); } } @@ -616,6 +627,10 @@ void wbx_xcvr::tx_get(const wax::obj &key_, wax::obj &val){ val = this->get_locked(dboard_iface::UNIT_TX); return; + case SUBDEV_PROP_BANDWIDTH: + val = 2*30.0e6; //20MHz low-pass, we want complex double-sided + return; + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -641,6 +656,12 @@ void wbx_xcvr::tx_set(const wax::obj &key_, const wax::obj &val){ case SUBDEV_PROP_ENABLED: return; //always enabled + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("WBX: No tunable bandwidth, fixed filtered to 40MHz")) + ); + return; + default: UHD_THROW_PROP_SET_ERROR(); } } diff --git a/host/lib/usrp/dboard/db_xcvr2450.cpp b/host/lib/usrp/dboard/db_xcvr2450.cpp index fb1367113..be0e42b92 100644 --- a/host/lib/usrp/dboard/db_xcvr2450.cpp +++ b/host/lib/usrp/dboard/db_xcvr2450.cpp @@ -626,7 +626,7 @@ void xcvr2450::rx_get(const wax::obj &key_, wax::obj &val){ return; case SUBDEV_PROP_BANDWIDTH: - val = _rx_bandwidth; + val = 2*_rx_bandwidth; //_tx_bandwidth is low-pass, we want complex double-sided return; default: UHD_THROW_PROP_GET_ERROR(); @@ -652,7 +652,7 @@ void xcvr2450::rx_set(const wax::obj &key_, const wax::obj &val){ return; case SUBDEV_PROP_BANDWIDTH: - this->set_rx_bandwidth(val.as<double>()); + this->set_rx_bandwidth(val.as<double>()/2.0); //complex double-sided, we want low-pass return; case SUBDEV_PROP_ENABLED: @@ -725,7 +725,7 @@ void xcvr2450::tx_get(const wax::obj &key_, wax::obj &val){ return; case SUBDEV_PROP_BANDWIDTH: - val = _tx_bandwidth; + val = 2*_tx_bandwidth; //_tx_bandwidth is low-pass, we want complex double-sided return; default: UHD_THROW_PROP_GET_ERROR(); @@ -747,7 +747,7 @@ void xcvr2450::tx_set(const wax::obj &key_, const wax::obj &val){ return; case SUBDEV_PROP_BANDWIDTH: - this->set_tx_bandwidth(val.as<double>()); + this->set_tx_bandwidth(val.as<double>()/2.0); //complex double-sided, we want low-pass return; case SUBDEV_PROP_ANTENNA: diff --git a/host/lib/usrp/dboard_manager.cpp b/host/lib/usrp/dboard_manager.cpp index d73a698ae..5a98bb8eb 100644 --- a/host/lib/usrp/dboard_manager.cpp +++ b/host/lib/usrp/dboard_manager.cpp @@ -189,7 +189,7 @@ static args_t get_dboard_args( //verify that there is a registered constructor for this id if (not get_id_to_args_map().has_key(dboard_id)){ - uhd::print_warning(str(boost::format( + uhd::warning::post(str(boost::format( "Unknown dboard ID: %s.\n" ) % dboard_id.to_pp_string())); return get_dboard_args(unit, dboard_id, true); @@ -217,7 +217,7 @@ dboard_manager_impl::dboard_manager_impl( //warn for invalid dboard id xcvr combinations if (rx_dboard_is_xcvr != this_dboard_is_xcvr or tx_dboard_is_xcvr != this_dboard_is_xcvr){ - uhd::print_warning(str(boost::format( + uhd::warning::post(str(boost::format( "Unknown transceiver board ID combination...\n" "RX dboard ID: %s\n" "TX dboard ID: %s\n" diff --git a/host/lib/usrp/multi_usrp.cpp b/host/lib/usrp/multi_usrp.cpp index 443b91594..876f1a3fc 100644 --- a/host/lib/usrp/multi_usrp.cpp +++ b/host/lib/usrp/multi_usrp.cpp @@ -145,7 +145,7 @@ public: time_spec_t time_0 = _mboard(0)[MBOARD_PROP_TIME_NOW].as<time_spec_t>(); time_spec_t time_i = _mboard(m)[MBOARD_PROP_TIME_NOW].as<time_spec_t>(); if (time_i < time_0 or (time_i - time_0) > time_spec_t(0.01)){ //10 ms: greater than RTT but not too big - uhd::print_warning(str(boost::format( + uhd::warning::post(str(boost::format( "Detected time deviation between board %d and board 0.\n" "Board 0 time is %f seconds.\n" "Board %d time is %f seconds.\n" @@ -154,6 +154,15 @@ public: } } + bool get_time_synchronized(void){ + for (size_t m = 1; m < get_num_mboards(); m++){ + time_spec_t time_0 = _mboard(0)[MBOARD_PROP_TIME_NOW].as<time_spec_t>(); + time_spec_t time_i = _mboard(m)[MBOARD_PROP_TIME_NOW].as<time_spec_t>(); + if (time_i < time_0 or (time_i - time_0) > time_spec_t(0.01)) return false; + } + return true; + } + void issue_stream_cmd(const stream_cmd_t &stream_cmd){ for (size_t m = 0; m < get_num_mboards(); m++){ _mboard(m)[MBOARD_PROP_STREAM_CMD] = stream_cmd; @@ -210,15 +219,9 @@ public: return _rx_dsp(0)[DSP_PROP_HOST_RATE].as<double>(); } - tune_result_t set_rx_freq(double target_freq, size_t chan){ - tune_result_t r = tune_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(chan/rx_cpm()), chan%rx_cpm(), target_freq); - do_tune_freq_warning_message(target_freq, get_rx_freq(chan), "RX"); - return r; - } - - tune_result_t set_rx_freq(double target_freq, double lo_off, size_t chan){ - tune_result_t r = tune_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(chan/rx_cpm()), chan%rx_cpm(), target_freq, lo_off); - do_tune_freq_warning_message(target_freq, get_rx_freq(chan), "RX"); + tune_result_t set_rx_freq(const tune_request_t &tune_request, size_t chan){ + tune_result_t r = tune_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(chan/rx_cpm()), chan%rx_cpm(), tune_request); + do_tune_freq_warning_message(tune_request.target_freq, get_rx_freq(chan), "RX"); return r; } @@ -314,15 +317,9 @@ public: return _tx_dsp(0)[DSP_PROP_HOST_RATE].as<double>(); } - tune_result_t set_tx_freq(double target_freq, size_t chan){ - tune_result_t r = tune_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(chan/tx_cpm()), chan%tx_cpm(), target_freq); - do_tune_freq_warning_message(target_freq, get_tx_freq(chan), "TX"); - return r; - } - - tune_result_t set_tx_freq(double target_freq, double lo_off, size_t chan){ - tune_result_t r = tune_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(chan/tx_cpm()), chan%tx_cpm(), target_freq, lo_off); - do_tune_freq_warning_message(target_freq, get_tx_freq(chan), "TX"); + tune_result_t set_tx_freq(const tune_request_t &tune_request, size_t chan){ + tune_result_t r = tune_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(chan/tx_cpm()), chan%tx_cpm(), tune_request); + do_tune_freq_warning_message(tune_request.target_freq, get_tx_freq(chan), "TX"); return r; } diff --git a/host/lib/usrp/single_usrp.cpp b/host/lib/usrp/single_usrp.cpp index 5e57849b8..a0456d1f0 100644 --- a/host/lib/usrp/single_usrp.cpp +++ b/host/lib/usrp/single_usrp.cpp @@ -146,15 +146,9 @@ public: return _rx_dsp()[DSP_PROP_HOST_RATE].as<double>(); } - tune_result_t set_rx_freq(double target_freq, size_t chan){ - tune_result_t r = tune_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(), chan, target_freq); - do_tune_freq_warning_message(target_freq, get_rx_freq(chan), "RX"); - return r; - } - - tune_result_t set_rx_freq(double target_freq, double lo_off, size_t chan){ - tune_result_t r = tune_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(), chan, target_freq, lo_off); - do_tune_freq_warning_message(target_freq, get_rx_freq(chan), "RX"); + tune_result_t set_rx_freq(const tune_request_t &tune_request, size_t chan){ + tune_result_t r = tune_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(), chan, tune_request); + do_tune_freq_warning_message(tune_request.target_freq, get_rx_freq(chan), "RX"); return r; } @@ -238,15 +232,9 @@ public: return _tx_dsp()[DSP_PROP_HOST_RATE].as<double>(); } - tune_result_t set_tx_freq(double target_freq, size_t chan){ - tune_result_t r = tune_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(), chan, target_freq); - do_tune_freq_warning_message(target_freq, get_tx_freq(chan), "TX"); - return r; - } - - tune_result_t set_tx_freq(double target_freq, double lo_off, size_t chan){ - tune_result_t r = tune_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(), chan, target_freq, lo_off); - do_tune_freq_warning_message(target_freq, get_tx_freq(chan), "TX"); + tune_result_t set_tx_freq(const tune_request_t &tune_request, size_t chan){ + tune_result_t r = tune_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(), chan, tune_request); + do_tune_freq_warning_message(tune_request.target_freq, get_tx_freq(chan), "TX"); return r; } diff --git a/host/lib/usrp/tune_helper.cpp b/host/lib/usrp/tune_helper.cpp index 7633c67f2..fa40a8a26 100644 --- a/host/lib/usrp/tune_helper.cpp +++ b/host/lib/usrp/tune_helper.cpp @@ -19,6 +19,7 @@ #include <uhd/usrp/subdev_props.hpp> #include <uhd/usrp/dsp_props.hpp> #include <uhd/usrp/dboard_iface.hpp> //unit_t +#include <uhd/utils/algorithm.hpp> #include <boost/math/special_functions/sign.hpp> #include <cmath> @@ -28,55 +29,99 @@ using namespace uhd::usrp; /*********************************************************************** * Tune Helper Functions **********************************************************************/ -static tune_result_t tune_xx_subdev_and_dxc( +static tune_result_t tune_xx_subdev_and_dsp( dboard_iface::unit_t unit, - wax::obj subdev, wax::obj dxc, size_t chan, - double target_freq, double lo_offset + wax::obj subdev, wax::obj dsp, size_t chan, + const tune_request_t &tune_request ){ wax::obj subdev_freq_proxy = subdev[SUBDEV_PROP_FREQ]; - std::string freq_name = dxc[DSP_PROP_FREQ_SHIFT_NAMES].as<prop_names_t>().at(chan); - wax::obj dxc_freq_proxy = dxc[named_prop_t(DSP_PROP_FREQ_SHIFT, freq_name)]; - double dxc_sample_rate = dxc[DSP_PROP_CODEC_RATE].as<double>(); + std::string freq_name = dsp[DSP_PROP_FREQ_SHIFT_NAMES].as<prop_names_t>().at(chan); + wax::obj dsp_freq_proxy = dsp[named_prop_t(DSP_PROP_FREQ_SHIFT, freq_name)]; + double dsp_sample_rate = dsp[DSP_PROP_CODEC_RATE].as<double>(); - // Ask the d'board to tune as closely as it can to target_freq+lo_offset - double target_inter_freq = target_freq + lo_offset; - subdev_freq_proxy = target_inter_freq; - double actual_inter_freq = subdev_freq_proxy.as<double>(); - - //perform the correction correction for dxc rates outside of nyquist - double delta_freq = std::fmod(target_freq - actual_inter_freq, dxc_sample_rate); - bool outside_of_nyquist = std::abs(delta_freq) > dxc_sample_rate/2.0; - double target_dxc_freq = (outside_of_nyquist)? - boost::math::sign(delta_freq)*dxc_sample_rate - delta_freq : -delta_freq; + //------------------------------------------------------------------ + //-- calculate the LO offset, only used with automatic policy + //------------------------------------------------------------------ + double lo_offset = 0.0; + if (subdev[SUBDEV_PROP_USE_LO_OFFSET].as<bool>()){ + //If the local oscillator will be in the passband, use an offset. + //But constrain the LO offset by the width of the filter bandwidth. + double rate = dsp[DSP_PROP_HOST_RATE].as<double>(); + double bw = subdev[SUBDEV_PROP_BANDWIDTH].as<double>(); + if (bw > rate) lo_offset = std::min((bw - rate)/2, rate/2); + } - //invert the sign on the dxc freq given the following conditions - if (unit == dboard_iface::UNIT_TX) target_dxc_freq *= -1.0; + //------------------------------------------------------------------ + //-- set the intermediate frequency depending upon the IF policy + //------------------------------------------------------------------ + double target_inter_freq = 0.0; + switch (tune_request.inter_freq_policy){ + case tune_request_t::POLICY_AUTO: + target_inter_freq = tune_request.target_freq + lo_offset; + subdev_freq_proxy = target_inter_freq; + break; + + case tune_request_t::POLICY_MANUAL: + target_inter_freq = tune_request.inter_freq; + subdev_freq_proxy = target_inter_freq; + break; + + case tune_request_t::POLICY_NONE: break; //does not set + } + double actual_inter_freq = subdev_freq_proxy.as<double>(); - dxc_freq_proxy = target_dxc_freq; - double actual_dxc_freq = dxc_freq_proxy.as<double>(); + //------------------------------------------------------------------ + //-- calculate the dsp freq, only used with automatic policy + //------------------------------------------------------------------ + double delta_freq = std::fmod(tune_request.target_freq - actual_inter_freq, dsp_sample_rate); + bool outside_of_nyquist = std::abs(delta_freq) > dsp_sample_rate/2.0; + double target_dsp_freq = (outside_of_nyquist)? + boost::math::sign(delta_freq)*dsp_sample_rate - delta_freq : -delta_freq; + + //invert the sign on the dsp freq given the following conditions + if (unit == dboard_iface::UNIT_TX) target_dsp_freq *= -1.0; + + //------------------------------------------------------------------ + //-- set the dsp frequency depending upon the dsp frequency policy + //------------------------------------------------------------------ + switch (tune_request.dsp_freq_policy){ + case tune_request_t::POLICY_AUTO: + dsp_freq_proxy = target_dsp_freq; + break; + + case tune_request_t::POLICY_MANUAL: + target_dsp_freq = tune_request.dsp_freq; + dsp_freq_proxy = target_dsp_freq; + break; + + case tune_request_t::POLICY_NONE: break; //does not set + } + double actual_dsp_freq = dsp_freq_proxy.as<double>(); - //load and return the tune result + //------------------------------------------------------------------ + //-- load and return the tune result + //------------------------------------------------------------------ tune_result_t tune_result; tune_result.target_inter_freq = target_inter_freq; tune_result.actual_inter_freq = actual_inter_freq; - tune_result.target_dsp_freq = target_dxc_freq; - tune_result.actual_dsp_freq = actual_dxc_freq; + tune_result.target_dsp_freq = target_dsp_freq; + tune_result.actual_dsp_freq = actual_dsp_freq; return tune_result; } -static double derive_freq_from_xx_subdev_and_dxc( +static double derive_freq_from_xx_subdev_and_dsp( dboard_iface::unit_t unit, - wax::obj subdev, wax::obj dxc, size_t chan + wax::obj subdev, wax::obj dsp, size_t chan ){ //extract actual dsp and IF frequencies double actual_inter_freq = subdev[SUBDEV_PROP_FREQ].as<double>(); - std::string freq_name = dxc[DSP_PROP_FREQ_SHIFT_NAMES].as<prop_names_t>().at(chan); - double actual_dxc_freq = dxc[named_prop_t(DSP_PROP_FREQ_SHIFT, freq_name)].as<double>(); + std::string freq_name = dsp[DSP_PROP_FREQ_SHIFT_NAMES].as<prop_names_t>().at(chan); + double actual_dsp_freq = dsp[named_prop_t(DSP_PROP_FREQ_SHIFT, freq_name)].as<double>(); - //invert the sign on the dxc freq given the following conditions - if (unit == dboard_iface::UNIT_TX) actual_dxc_freq *= -1.0; + //invert the sign on the dsp freq given the following conditions + if (unit == dboard_iface::UNIT_TX) actual_dsp_freq *= -1.0; - return actual_inter_freq - actual_dxc_freq; + return actual_inter_freq - actual_dsp_freq; } /*********************************************************************** @@ -84,27 +129,15 @@ static double derive_freq_from_xx_subdev_and_dxc( **********************************************************************/ tune_result_t usrp::tune_rx_subdev_and_dsp( wax::obj subdev, wax::obj ddc, size_t chan, - double target_freq, double lo_offset -){ - return tune_xx_subdev_and_dxc(dboard_iface::UNIT_RX, subdev, ddc, chan, target_freq, lo_offset); -} - -tune_result_t usrp::tune_rx_subdev_and_dsp( - wax::obj subdev, wax::obj ddc, - size_t chan, double target_freq + const tune_request_t &tune_request ){ - double lo_offset = 0.0; - //if the local oscillator will be in the passband, use an offset - if (subdev[SUBDEV_PROP_USE_LO_OFFSET].as<bool>()){ - lo_offset = 2.0*ddc[DSP_PROP_HOST_RATE].as<double>(); - } - return tune_rx_subdev_and_dsp(subdev, ddc, chan, target_freq, lo_offset); + return tune_xx_subdev_and_dsp(dboard_iface::UNIT_RX, subdev, ddc, chan, tune_request); } double usrp::derive_freq_from_rx_subdev_and_dsp( wax::obj subdev, wax::obj ddc, size_t chan ){ - return derive_freq_from_xx_subdev_and_dxc(dboard_iface::UNIT_RX, subdev, ddc, chan); + return derive_freq_from_xx_subdev_and_dsp(dboard_iface::UNIT_RX, subdev, ddc, chan); } /*********************************************************************** @@ -112,25 +145,13 @@ double usrp::derive_freq_from_rx_subdev_and_dsp( **********************************************************************/ tune_result_t usrp::tune_tx_subdev_and_dsp( wax::obj subdev, wax::obj duc, size_t chan, - double target_freq, double lo_offset + const tune_request_t &tune_request ){ - return tune_xx_subdev_and_dxc(dboard_iface::UNIT_TX, subdev, duc, chan, target_freq, lo_offset); -} - -tune_result_t usrp::tune_tx_subdev_and_dsp( - wax::obj subdev, wax::obj duc, - size_t chan, double target_freq -){ - double lo_offset = 0.0; - //if the local oscillator will be in the passband, use an offset - if (subdev[SUBDEV_PROP_USE_LO_OFFSET].as<bool>()){ - lo_offset = 2.0*duc[DSP_PROP_HOST_RATE].as<double>(); - } - return tune_tx_subdev_and_dsp(subdev, duc, chan, target_freq, lo_offset); + return tune_xx_subdev_and_dsp(dboard_iface::UNIT_TX, subdev, duc, chan, tune_request); } double usrp::derive_freq_from_tx_subdev_and_dsp( wax::obj subdev, wax::obj duc, size_t chan ){ - return derive_freq_from_xx_subdev_and_dxc(dboard_iface::UNIT_TX, subdev, duc, chan); + return derive_freq_from_xx_subdev_and_dsp(dboard_iface::UNIT_TX, subdev, duc, chan); } diff --git a/host/lib/usrp/usrp1/mboard_impl.cpp b/host/lib/usrp/usrp1/mboard_impl.cpp index fe3774eb4..669b20efa 100644 --- a/host/lib/usrp/usrp1/mboard_impl.cpp +++ b/host/lib/usrp/usrp1/mboard_impl.cpp @@ -98,7 +98,7 @@ static boost::uint32_t calc_rx_mux( // for all quadrature sources: Z = 0 // for mixed sources: warning + Z = 0 int Z = (num_quads > 0)? 0 : 1; - if (num_quads != 0 and num_reals != 0) uhd::print_warning( + if (num_quads != 0 and num_reals != 0) uhd::warning::post( "Mixing real and quadrature rx subdevices is not supported.\n" "The Q input to the real source(s) will be non-zero.\n" ); diff --git a/host/lib/usrp/usrp1/usrp1_impl.cpp b/host/lib/usrp/usrp1/usrp1_impl.cpp index 276ca86f6..314384e72 100644 --- a/host/lib/usrp/usrp1/usrp1_impl.cpp +++ b/host/lib/usrp/usrp1/usrp1_impl.cpp @@ -64,7 +64,7 @@ static device_addrs_t usrp1_find(const device_addr_t &hint) ); } catch(...){ - uhd::print_warning( + uhd::warning::post( "Could not locate USRP1 firmware.\n" "Please install the images package.\n" ); diff --git a/host/lib/usrp/wrapper_utils.hpp b/host/lib/usrp/wrapper_utils.hpp index aee230fc0..6f9fdbfca 100644 --- a/host/lib/usrp/wrapper_utils.hpp +++ b/host/lib/usrp/wrapper_utils.hpp @@ -40,7 +40,7 @@ static inline void do_samp_rate_warning_message( ){ static const double max_allowed_error = 1.0; //Sps if (std::abs(target_rate - actual_rate) > max_allowed_error){ - uhd::print_warning(str(boost::format( + uhd::warning::post(str(boost::format( "The hardware does not support the requested %s sample rate:\n" "Target sample rate: %f MSps\n" "Actual sample rate: %f MSps\n" @@ -55,7 +55,7 @@ static inline void do_tune_freq_warning_message( ){ static const double max_allowed_error = 1.0; //Hz if (std::abs(target_freq - actual_freq) > max_allowed_error){ - uhd::print_warning(str(boost::format( + uhd::warning::post(str(boost::format( "The hardware does not support the requested %s frequency:\n" "Target frequency: %f MHz\n" "Actual frequency: %f MHz\n" diff --git a/host/lib/utils/thread_priority.cpp b/host/lib/utils/thread_priority.cpp index f09d1b1d6..40b74f655 100644 --- a/host/lib/utils/thread_priority.cpp +++ b/host/lib/utils/thread_priority.cpp @@ -26,7 +26,7 @@ bool uhd::set_thread_priority_safe(float priority, bool realtime){ set_thread_priority(priority, realtime); return true; }catch(const std::exception &e){ - uhd::print_warning(str(boost::format( + uhd::warning::post(str(boost::format( "%s\n" "Failed to set thread priority %d (%s):\n" "Performance may be negatively affected.\n" diff --git a/host/lib/utils/warning.cpp b/host/lib/utils/warning.cpp index 8a7d35a23..05be7ae4d 100644 --- a/host/lib/utils/warning.cpp +++ b/host/lib/utils/warning.cpp @@ -17,16 +17,67 @@ #include <uhd/utils/warning.hpp> #include <uhd/utils/algorithm.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/types/dict.hpp> #include <boost/foreach.hpp> +#include <sstream> +#include <stdexcept> #include <iostream> #include <vector> using namespace uhd; -void uhd::print_warning(const std::string &msg){ - //print the warning message - std::cerr << std::endl << "Warning:" << std::endl; +/*********************************************************************** + * Registry implementation + **********************************************************************/ +//create the registry for the handlers +typedef uhd::dict<std::string, warning::handler_t> registry_t; +UHD_SINGLETON_FCN(registry_t, get_registry) + +//the default warning handler +static void stderr_warning(const std::string &msg){ + std::cerr << msg; +} + +//register a default handler +UHD_STATIC_BLOCK(warning_register_default){ + warning::register_handler("default", &stderr_warning); +} + +/*********************************************************************** + * Post + format + **********************************************************************/ +void warning::post(const std::string &msg){ + std::stringstream ss; + + //format the warning message + ss << std::endl << "Warning:" << std::endl; BOOST_FOREACH(const std::string &line, std::split_string(msg, "\n")){ - std::cerr << " " << line << std::endl; + ss << " " << line << std::endl; + } + + //post the formatted message + BOOST_FOREACH(const std::string &name, get_registry().keys()){ + get_registry()[name](ss.str()); } } + +/*********************************************************************** + * Registry accessor functions + **********************************************************************/ +void warning::register_handler( + const std::string &name, const handler_t &handler +){ + get_registry()[name] = handler; +} + +warning::handler_t warning::unregister_handler(const std::string &name){ + if (not get_registry().has_key(name)) throw std::runtime_error( + "The warning registry does not have a handler registered to " + name + ); + return get_registry().pop(name); +} + +const std::vector<std::string> warning::registry_names(void){ + return get_registry().keys(); +} diff --git a/host/test/tune_helper_test.cpp b/host/test/tune_helper_test.cpp index 1ef4af330..e0500ae3f 100644 --- a/host/test/tune_helper_test.cpp +++ b/host/test/tune_helper_test.cpp @@ -91,6 +91,44 @@ private: } }; +class dummy_subdev_bw : public wax::obj{ +private: + void get(const wax::obj &key, wax::obj &val){ + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + val = _freq; + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = true; + return; + + case SUBDEV_PROP_BANDWIDTH: + val = _bandwidth; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } + } + + void set(const wax::obj &key, const wax::obj &val){ + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_FREQ: + _freq = val.as<double>(); + return; + + case SUBDEV_PROP_BANDWIDTH: + _bandwidth = val.as<double>(); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } + } + + double _freq, _bandwidth; +}; + class dummy_dsp : public wax::obj{ public: dummy_dsp(double codec_rate): @@ -106,6 +144,10 @@ private: val = _codec_rate; return; + case DSP_PROP_HOST_RATE: + val = _host_rate; + return; + case DSP_PROP_FREQ_SHIFT: val = _freq_shift; return; @@ -125,11 +167,15 @@ private: _freq_shift = val.as<double>(); return; + case DSP_PROP_HOST_RATE: + _host_rate = val.as<double>(); + return; + default: UHD_THROW_PROP_SET_ERROR(); } } - double _codec_rate, _freq_shift; + double _codec_rate, _freq_shift, _host_rate; }; /*********************************************************************** @@ -141,7 +187,7 @@ BOOST_AUTO_TEST_CASE(test_tune_helper_rx){ dummy_subdev subdev(1e6); dummy_dsp dsp(100e6); - std::cout << "Testing tune helper RX automatic LO offset" << std::endl; + std::cout << "Testing tune helper RX automatic IF offset" << std::endl; tune_result_t tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 0, 2.3451e9); std::cout << tr.to_pp_string() << std::endl; BOOST_CHECK_CLOSE(tr.actual_inter_freq, 2.345e9, tolerance); @@ -155,7 +201,7 @@ BOOST_AUTO_TEST_CASE(test_tune_helper_tx){ dummy_subdev subdev(1e6); dummy_dsp dsp(100e6); - std::cout << "Testing tune helper TX automatic LO offset" << std::endl; + std::cout << "Testing tune helper TX automatic IF offset" << std::endl; tune_result_t tr = tune_tx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 0, 2.3451e9); std::cout << tr.to_pp_string() << std::endl; BOOST_CHECK_CLOSE(tr.actual_inter_freq, 2.345e9, tolerance); @@ -178,3 +224,30 @@ BOOST_AUTO_TEST_CASE(test_tune_helper_rx_nyquist){ double freq_derived = derive_freq_from_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 0); BOOST_CHECK_CLOSE(freq_derived, -45e6, tolerance); } + +BOOST_AUTO_TEST_CASE(test_tune_helper_rx_lo_off){ + dummy_subdev_bw subdev; + dummy_dsp dsp(100e6); + tune_result_t tr; + + std::cout << "Testing tune helper RX automatic LO offset B >> fs" << std::endl; + subdev[SUBDEV_PROP_BANDWIDTH] = double(40e6); + dsp[DSP_PROP_HOST_RATE] = double(4e6); + tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 0, 2.45e9); + std::cout << tr.to_pp_string() << std::endl; + BOOST_CHECK_CLOSE(tr.actual_inter_freq, 2.45e9+4e6/2, tolerance); + + std::cout << "Testing tune helper RX automatic LO offset B > fs" << std::endl; + subdev[SUBDEV_PROP_BANDWIDTH] = double(40e6); + dsp[DSP_PROP_HOST_RATE] = double(25e6); + tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 0, 2.45e9); + std::cout << tr.to_pp_string() << std::endl; + BOOST_CHECK_CLOSE(tr.actual_inter_freq, 2.45e9+(40e6-25e6)/2, tolerance); + + std::cout << "Testing tune helper RX automatic LO offset B < fs" << std::endl; + subdev[SUBDEV_PROP_BANDWIDTH] = double(20e6); + dsp[DSP_PROP_HOST_RATE] = double(25e6); + tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 0, 2.45e9); + std::cout << tr.to_pp_string() << std::endl; + BOOST_CHECK_CLOSE(tr.actual_inter_freq, 2.45e9, tolerance); +} diff --git a/host/test/warning_test.cpp b/host/test/warning_test.cpp index 6202c4270..db19955de 100644 --- a/host/test/warning_test.cpp +++ b/host/test/warning_test.cpp @@ -19,9 +19,9 @@ #include <uhd/utils/warning.hpp> #include <iostream> -BOOST_AUTO_TEST_CASE(test_print_warning){ +BOOST_AUTO_TEST_CASE(test_warning_post){ std::cerr << "---begin print test ---" << std::endl; - uhd::print_warning( + uhd::warning::post( "This is a test print for a warning message.\n" "And this is the second line of the test print.\n" ); |