aboutsummaryrefslogtreecommitdiffstats
path: root/host
diff options
context:
space:
mode:
Diffstat (limited to 'host')
-rw-r--r--host/docs/build.rst2
-rw-r--r--host/docs/dboards.rst4
-rw-r--r--host/docs/general.rst2
-rw-r--r--host/docs/identification.rst2
-rw-r--r--host/docs/images.rst4
-rw-r--r--host/docs/usrp2.rst18
-rw-r--r--host/docs/usrp_e1xx.rst2
-rw-r--r--host/lib/transport/libusb1_zero_copy.cpp14
-rwxr-xr-xhost/utils/usrp2_card_burner.py44
-rwxr-xr-xhost/utils/usrp2_card_burner_gui.py87
-rwxr-xr-xhost/utils/usrp2_recovery.py12
-rwxr-xr-xhost/utils/usrp_n2xx_net_burner.py105
-rwxr-xr-xhost/utils/usrp_n2xx_net_burner_gui.py84
13 files changed, 199 insertions, 181 deletions
diff --git a/host/docs/build.rst b/host/docs/build.rst
index c645817ab..063b2b371 100644
--- a/host/docs/build.rst
+++ b/host/docs/build.rst
@@ -116,7 +116,7 @@ Generate Makefiles with cmake
Additionally, configuration variables can be passed into cmake via the command line.
The following common-use configuration variables are listed below:
-* For a custom install prefix: -DCMAKE_INSTALL_PREFIX=<prefix>
+* For a custom install prefix: -DCMAKE_INSTALL_PREFIX=<install-path>
* To install libs into lib64: cmake -DLIB_SUFFIX=64
Example usage:
diff --git a/host/docs/dboards.rst b/host/docs/dboards.rst
index 7f205c404..419456df2 100644
--- a/host/docs/dboards.rst
+++ b/host/docs/dboards.rst
@@ -182,7 +182,7 @@ If you lose R193, you can use anything from 0 to 10 ohms there.
With the daughterboard plugged-in, run the following commands:
::
- cd <prefix>/share/uhd/utils
+ cd <install-path>/share/uhd/utils
./usrp_burn_db_eeprom --id=0x000d --unit=RX --args=<args> --slot=<slot>
* <args> are device address arguments (optional if only one USRP is on your machine)
@@ -209,7 +209,7 @@ These are all 0-ohm, so if you lose one, just short across the appropriate pads
With the daughterboard plugged-in, run the following commands:
::
- cd <prefix>/share/uhd/utils
+ cd <install-path>/share/uhd/utils
./usrp_burn_db_eeprom --id=<rx_id> --unit=RX --args=<args> --slot=<slot>
./usrp_burn_db_eeprom --id=<tx_id> --unit=TX --args=<args> --slot=<slot>
diff --git a/host/docs/general.rst b/host/docs/general.rst
index 2894fbf88..73b820c84 100644
--- a/host/docs/general.rst
+++ b/host/docs/general.rst
@@ -52,5 +52,5 @@ Support for dynamically loadable modules
For a module to be loaded at runtime, it must be:
* found in the UHD_MODULE_PATH environment variable,
-* installed into the <prefix>/share/uhd/modules directory,
+* installed into the <install-path>/share/uhd/modules directory,
* or installed into /usr/share/uhd/modules directory (unix only).
diff --git a/host/docs/identification.rst b/host/docs/identification.rst
index 90484744c..deda61531 100644
--- a/host/docs/identification.rst
+++ b/host/docs/identification.rst
@@ -107,7 +107,7 @@ Set a custom name
Run the following commands:
::
- cd <prefix>/share/uhd/utils
+ cd <install-path>/share/uhd/utils
./usrp_burn_mb_eeprom --args=<optional device args> --key=name --val=lab1_xcvr
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
diff --git a/host/docs/images.rst b/host/docs/images.rst
index f5be88a65..adfa6d530 100644
--- a/host/docs/images.rst
+++ b/host/docs/images.rst
@@ -54,8 +54,8 @@ When installing images from an archive, there are two options:
**Option 1:**
Unpack the archive into the UHD installation prefix.
-The UHD will always search <prefix>/share/uhd/images for image files.
-Where <prefix> was set by the CMAKE_INSTALL_PREFIX at configure-time.
+The UHD will always search <install-path>/share/uhd/images for image files.
+Where <install-path> was set by the CMAKE_INSTALL_PREFIX at configure-time.
**Option 2:**
diff --git a/host/docs/usrp2.rst b/host/docs/usrp2.rst
index 912f7d2bd..161170f2c 100644
--- a/host/docs/usrp2.rst
+++ b/host/docs/usrp2.rst
@@ -25,11 +25,11 @@ Use the card burner tool (unix)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
::
- sudo <prefix>/share/uhd/utils/usrp2_card_burner_gui.py
+ sudo <install-path>/share/uhd/utils/usrp2_card_burner_gui.py
-- OR --
- cd <prefix>/share/uhd/utils
+ cd <install-path>/share/uhd/utils
sudo ./usrp2_card_burner.py --dev=/dev/sd<XXX> --fpga=<path_to_fpga_image>
sudo ./usrp2_card_burner.py --dev=/dev/sd<XXX> --fw=<path_to_firmware_image>
@@ -42,7 +42,7 @@ Use the card burner tool (windows)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
::
- <path_to_python.exe> <prefix>/share/uhd/utils/usrp2_card_burner_gui.py
+ <path_to_python.exe> <install-path>/share/uhd/utils/usrp2_card_burner_gui.py
------------------------------------------------------------------------
@@ -58,11 +58,11 @@ Use the net burner tool (unix)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
::
- sudo <prefix>/share/uhd/utils/usrp_n2xx_net_burner_gui.py
+ sudo <install-path>/share/uhd/utils/usrp_n2xx_net_burner_gui.py
-- OR --
- cd <prefix>/share/uhd/utils
+ cd <install-path>/share/uhd/utils
./usrp_n2xx_net_burner.py --addr=<ip address> --fw=<path for firmware image>
./usrp_n2xx_net_burner.py --addr=<ip address> --fpga=<path to FPGA image>
@@ -71,7 +71,7 @@ Use the net burner tool (Windows)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
::
- <path_to_python.exe> <prefix>/share/uhd/utils/usrp_n2xx_net_burner_gui.py
+ <path_to_python.exe> <install-path>/share/uhd/utils/usrp_n2xx_net_burner_gui.py
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Device recovery and bricking
@@ -145,7 +145,7 @@ and the network must be setup properly as described above.
Run the following commands:
::
- cd <prefix>/share/uhd/utils
+ cd <install-path>/share/uhd/utils
./usrp_burn_mb_eeprom --args=<optional device args> --key=ip-addr --val=192.168.10.3
**Method 2 (Linux Only):**
@@ -154,7 +154,7 @@ It uses raw ethernet packets to bypass the IP/UDP layer to communicate with the
Run the following commands:
::
- cd <prefix>/share/uhd/utils
+ cd <install-path>/share/uhd/utils
sudo ./usrp2_recovery.py --ifc=eth0 --new-ip=192.168.10.3
------------------------------------------------------------------------
@@ -343,5 +343,5 @@ Test the PPS input with the following app:
::
- cd <prefix>/share/uhd/examples
+ cd <install-path>/share/uhd/examples
./test_pps_input --args=<args>
diff --git a/host/docs/usrp_e1xx.rst b/host/docs/usrp_e1xx.rst
index ffcd370dd..fb5848bad 100644
--- a/host/docs/usrp_e1xx.rst
+++ b/host/docs/usrp_e1xx.rst
@@ -61,5 +61,5 @@ can talk directly to the clock generator over a SPI interface.
Run the following commands to restore the clock generator to a usable state:
::
- cd <prefix>/share/uhd/usrp_e_utilities
+ cd <install-path>/share/uhd/usrp_e_utilities
./usrp-e-utility --fpga=../images/usrp_e100_pt_fpga.bin --reclk
diff --git a/host/lib/transport/libusb1_zero_copy.cpp b/host/lib/transport/libusb1_zero_copy.cpp
index fe6936c7e..e42cab1d1 100644
--- a/host/lib/transport/libusb1_zero_copy.cpp
+++ b/host/lib/transport/libusb1_zero_copy.cpp
@@ -34,13 +34,23 @@ using namespace uhd::transport;
static const size_t DEFAULT_NUM_XFERS = 16; //num xfers
static const size_t DEFAULT_XFER_SIZE = 32*512; //bytes
+//! Define LIBUSB_CALL when its missing (non-windows)
+#ifndef LIBUSB_CALL
+ #define LIBUSB_CALL
+#endif /*LIBUSB_CALL*/
+
+/*!
+ * All libusb callback functions should be marked with the LIBUSB_CALL macro
+ * to ensure that they are compiled with the same calling convention as libusb.
+ */
+
//! helper function: handles all async callbacks
-static void libusb_async_cb(libusb_transfer *lut){
+static void LIBUSB_CALL libusb_async_cb(libusb_transfer *lut){
(*static_cast<boost::function<void()> *>(lut->user_data))();
}
//! callback to free transfer upon cancellation
-static void cancel_transfer_cb(libusb_transfer *lut){
+static void LIBUSB_CALL cancel_transfer_cb(libusb_transfer *lut){
if (lut->status == LIBUSB_TRANSFER_CANCELLED) libusb_free_transfer(lut);
else std::cout << "libusb cancel_transfer unexpected status " << lut->status << std::endl;
}
diff --git a/host/utils/usrp2_card_burner.py b/host/utils/usrp2_card_burner.py
index 1db5e59ce..741c7e3e1 100755
--- a/host/utils/usrp2_card_burner.py
+++ b/host/utils/usrp2_card_burner.py
@@ -1,6 +1,6 @@
#!/usr/bin/env python
#
-# Copyright 2010 Ettus Research LLC
+# Copyright 2010-2011 Ettus Research LLC
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -19,7 +19,11 @@
import platform
import tempfile
import subprocess
-import urllib
+try:
+ import urllib.request
+except ImportError:
+ import urllib
+ urllib.request = urllib
import optparse
import math
import os
@@ -46,16 +50,16 @@ def command(*args):
stderr=subprocess.STDOUT,
)
ret = p.wait()
- verbose = p.stdout.read()
- if ret != 0: raise Exception, verbose
+ verbose = p.stdout.read().decode('ascii')
+ if ret != 0: raise Exception(verbose)
return verbose
def get_dd_path():
if platform.system() == 'Windows':
dd_path = os.path.join(tempfile.gettempdir(), 'dd.exe')
if not os.path.exists(dd_path):
- print 'Downloading dd.exe to %s'%dd_path
- dd_bin = urllib.urlopen('http://www.ettus.com/downloads/dd.exe').read()
+ print('Downloading dd.exe to %s'%dd_path)
+ dd_bin = urllib.request.urlopen('http://www.ettus.com/downloads/dd.exe').read()
open(dd_path, 'wb').write(dd_bin)
return dd_path
return 'dd'
@@ -97,14 +101,14 @@ def get_raw_device_hints():
if key in info: return extract_info_value(info, key)
return info.splitlines()[0].strip()
- return sorted(set(map(extract_info_name, filter(is_info_valid, get_info_list(command(get_dd_path(), '--list'))))))
+ return sorted(set(map(extract_info_name, list(filter(is_info_valid, get_info_list(command(get_dd_path(), '--list')))))))
####################################################################
# Platform Linux: parse procfs /proc/partitions
####################################################################
if platform.system() == 'Linux':
devs = list()
- try: output = open('/proc/partitions', 'r').read()
+ try: output = open('/proc/partitions', 'r').read().decode('ascii')
except: return devs
for line in output.splitlines():
try:
@@ -120,15 +124,15 @@ def get_raw_device_hints():
# Platform Mac OS X: parse diskutil list and info commands
####################################################################
if platform.system() == 'Darwin':
- devs = map(lambda d: d.split()[0], filter(lambda l: l.startswith('/dev'), command('diskutil', 'list').splitlines()))
+ devs = [d.split()[0] for d in [l for l in command('diskutil', 'list').splitlines() if l.startswith('/dev')]]
def output_to_info(output):
- return dict([map(str.strip, pair.lower().split(':')) for pair in filter(lambda l: ':' in l, output.splitlines())])
+ return dict([list(map(str.strip, pair.lower().split(':'))) for pair in [l for l in output.splitlines() if ':' in l]])
def is_dev_valid(dev):
info = output_to_info(command('diskutil', 'info', dev))
try:
- if info.has_key('internal'): assert info['internal'] == 'no'
- if info.has_key('ejectable'): assert info['ejectable'] == 'yes'
- if info.has_key('total size'):
+ if 'internal' in info: assert info['internal'] == 'no'
+ if 'ejectable' in info: assert info['ejectable'] == 'yes'
+ if 'total size' in info:
size_match = re.match('^.*\((\d+)\s*bytes\).*$', info['total size'])
if size_match: assert int(size_match.groups()[0]) <= MAX_SD_CARD_SIZE
return True
@@ -175,8 +179,8 @@ def write_image(image_file, device_file, offset):
img_data = open(image_file, 'rb').read()
count = int_ceil_div(len(img_data), SECTOR_SIZE)
pad_len = SECTOR_SIZE*count - len(img_data)
- pad_str = ''.join([chr(0)]*pad_len) #zero-padding
- open(tmp_file, 'wb').write(img_data + pad_str)
+ padding = bytes(b'\x00')*pad_len #zero-padding
+ open(tmp_file, 'wb').write(img_data + padding)
#execute a dd subprocess
verbose = command(
@@ -196,7 +200,7 @@ def write_image(image_file, device_file, offset):
def write_and_verify(image_file, device_file, offset):
if os.path.getsize(image_file) > MAX_FILE_SIZE:
- raise Exception, 'Image file larger than %d bytes!'%MAX_FILE_SIZE
+ raise Exception('Image file larger than %d bytes!'%MAX_FILE_SIZE)
return '%s\n%s'%(
write_image(
image_file=image_file,
@@ -231,8 +235,8 @@ def get_options():
(options, args) = parser.parse_args()
if options.list:
- print 'Possible raw devices:'
- print ' ' + '\n '.join(get_raw_device_hints())
+ print('Possible raw devices:')
+ print(' ' + '\n '.join(get_raw_device_hints()))
exit()
return options
@@ -242,5 +246,5 @@ def get_options():
########################################################################
if __name__=='__main__':
options = get_options()
- if not options.dev: raise Exception, 'no raw device path specified'
- print burn_sd_card(dev=options.dev, fw=options.fw, fpga=options.fpga)
+ if not options.dev: raise Exception('no raw device path specified')
+ print(burn_sd_card(dev=options.dev, fw=options.fw, fpga=options.fpga))
diff --git a/host/utils/usrp2_card_burner_gui.py b/host/utils/usrp2_card_burner_gui.py
index 58b7a514a..2941629b9 100755
--- a/host/utils/usrp2_card_burner_gui.py
+++ b/host/utils/usrp2_card_burner_gui.py
@@ -1,6 +1,6 @@
#!/usr/bin/env python
#
-# Copyright 2010 Ettus Research LLC
+# Copyright 2010-2011 Ettus Research LLC
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -17,10 +17,17 @@
#
import usrp2_card_burner #import implementation
-import Tkinter, tkFileDialog, tkFont, tkMessageBox
+try:
+ import tkinter, tkinter.filedialog, tkinter.font, tkinter.messagebox
+except ImportError:
+ import tkFileDialog, tkFont, tkMessageBox
+ import Tkinter as tkinter
+ tkinter.filedialog = tkFileDialog
+ tkinter.font = tkFont
+ tkinter.messagebox = tkMessageBox
import os
-class BinFileEntry(Tkinter.Frame):
+class BinFileEntry(tkinter.Frame):
"""
Simple file entry widget for getting the file path of bin files.
Combines a label, entry, and button with file dialog callback.
@@ -28,15 +35,15 @@ class BinFileEntry(Tkinter.Frame):
def __init__(self, root, what, def_path=''):
self._what = what
- Tkinter.Frame.__init__(self, root)
- Tkinter.Label(self, text=what+":").pack(side=Tkinter.LEFT)
- self._entry = Tkinter.Entry(self, width=50)
- self._entry.insert(Tkinter.END, def_path)
- self._entry.pack(side=Tkinter.LEFT)
- Tkinter.Button(self, text="...", command=self._button_cb).pack(side=Tkinter.LEFT)
+ tkinter.Frame.__init__(self, root)
+ tkinter.Label(self, text=what+":").pack(side=tkinter.LEFT)
+ self._entry = tkinter.Entry(self, width=50)
+ self._entry.insert(tkinter.END, def_path)
+ self._entry.pack(side=tkinter.LEFT)
+ tkinter.Button(self, text="...", command=self._button_cb).pack(side=tkinter.LEFT)
def _button_cb(self):
- filename = tkFileDialog.askopenfilename(
+ filename = tkinter.filedialog.askopenfilename(
parent=self,
filetypes=[('bin files', '*.bin'), ('all files', '*.*')],
title="Select bin file for %s"%self._what,
@@ -45,65 +52,65 @@ class BinFileEntry(Tkinter.Frame):
# open file on your own
if filename:
- self._entry.delete(0, Tkinter.END)
+ self._entry.delete(0, tkinter.END)
self._entry.insert(0, filename)
def get_filename(self):
return self._entry.get()
-class DeviceEntryWidget(Tkinter.Frame):
+class DeviceEntryWidget(tkinter.Frame):
"""
Simple entry widget for getting the raw device name.
Combines a label, entry, and helpful text box with hints.
"""
def __init__(self, root, text=''):
- Tkinter.Frame.__init__(self, root)
+ tkinter.Frame.__init__(self, root)
- Tkinter.Button(self, text="Rescan for Devices", command=self._reload_cb).pack()
+ tkinter.Button(self, text="Rescan for Devices", command=self._reload_cb).pack()
- self._hints = Tkinter.Listbox(self)
+ self._hints = tkinter.Listbox(self)
self._hints.bind("<<ListboxSelect>>", self._listbox_cb)
self._reload_cb()
- self._hints.pack(expand=Tkinter.YES, fill=Tkinter.X)
+ self._hints.pack(expand=tkinter.YES, fill=tkinter.X)
- frame = Tkinter.Frame(self)
+ frame = tkinter.Frame(self)
frame.pack()
- Tkinter.Label(frame, text="Raw Device:").pack(side=Tkinter.LEFT)
- self._entry = Tkinter.Entry(frame, width=50)
- self._entry.insert(Tkinter.END, text)
- self._entry.pack(side=Tkinter.LEFT)
+ tkinter.Label(frame, text="Raw Device:").pack(side=tkinter.LEFT)
+ self._entry = tkinter.Entry(frame, width=50)
+ self._entry.insert(tkinter.END, text)
+ self._entry.pack(side=tkinter.LEFT)
def _reload_cb(self):
- self._hints.delete(0, Tkinter.END)
+ self._hints.delete(0, tkinter.END)
for hint in usrp2_card_burner.get_raw_device_hints():
- self._hints.insert(Tkinter.END, hint)
+ self._hints.insert(tkinter.END, hint)
def _listbox_cb(self, event):
try:
sel = self._hints.get(self._hints.curselection()[0])
- self._entry.delete(0, Tkinter.END)
+ self._entry.delete(0, tkinter.END)
self._entry.insert(0, sel)
- except Exception, e: print e
+ except Exception as e: print(e)
def get_devname(self):
return self._entry.get()
-class SectionLabel(Tkinter.Label):
+class SectionLabel(tkinter.Label):
"""
Make a text label with bold font.
"""
def __init__(self, root, text):
- Tkinter.Label.__init__(self, root, text=text)
+ tkinter.Label.__init__(self, root, text=text)
#set the font bold
- f = tkFont.Font(font=self['font'])
+ f = tkinter.font.Font(font=self['font'])
f['weight'] = 'bold'
self['font'] = f.name
-class USRP2CardBurnerApp(Tkinter.Frame):
+class USRP2CardBurnerApp(tkinter.Frame):
"""
The top level gui application for the usrp2 sd card burner.
Creates entry widgets and button with callback to write images.
@@ -111,7 +118,7 @@ class USRP2CardBurnerApp(Tkinter.Frame):
def __init__(self, root, dev, fw, fpga):
- Tkinter.Frame.__init__(self, root)
+ tkinter.Frame.__init__(self, root)
#pack the file entry widgets
SectionLabel(self, text="Select Images").pack(pady=5)
@@ -127,8 +134,8 @@ class USRP2CardBurnerApp(Tkinter.Frame):
#the do it button
SectionLabel(self, text="").pack(pady=5)
- Tkinter.Label(self, text="Warning! This tool can overwrite your hard drive. Use with caution.").pack()
- Tkinter.Button(self, text="Burn SD Card", command=self._burn).pack()
+ tkinter.Label(self, text="Warning! This tool can overwrite your hard drive. Use with caution.").pack()
+ tkinter.Button(self, text="Burn SD Card", command=self._burn).pack()
def _burn(self):
#grab strings from the gui
@@ -138,31 +145,31 @@ class USRP2CardBurnerApp(Tkinter.Frame):
#check input
if not dev:
- tkMessageBox.showerror('Error:', 'No device specified!')
+ tkinter.messagebox.showerror('Error:', 'No device specified!')
return
if not fw and not fpga:
- tkMessageBox.showerror('Error:', 'No images specified!')
+ tkinter.messagebox.showerror('Error:', 'No images specified!')
return
if fw and not os.path.exists(fw):
- tkMessageBox.showerror('Error:', 'Firmware image not found!')
+ tkinter.messagebox.showerror('Error:', 'Firmware image not found!')
return
if fpga and not os.path.exists(fpga):
- tkMessageBox.showerror('Error:', 'FPGA image not found!')
+ tkinter.messagebox.showerror('Error:', 'FPGA image not found!')
return
#burn the sd card
try:
verbose = usrp2_card_burner.burn_sd_card(dev=dev, fw=fw, fpga=fpga)
- tkMessageBox.showinfo('Verbose:', verbose)
- except Exception, e:
- tkMessageBox.showerror('Verbose:', 'Error: %s'%str(e))
+ tkinter.messagebox.showinfo('Verbose:', verbose)
+ except Exception as e:
+ tkinter.messagebox.showerror('Verbose:', 'Error: %s'%str(e))
########################################################################
# main
########################################################################
if __name__=='__main__':
options = usrp2_card_burner.get_options()
- root = Tkinter.Tk()
+ root = tkinter.Tk()
root.title('USRP2 SD Card Burner')
USRP2CardBurnerApp(root, dev=options.dev, fw=options.fw, fpga=options.fpga).pack()
root.mainloop()
diff --git a/host/utils/usrp2_recovery.py b/host/utils/usrp2_recovery.py
index 5654e93d3..c7578d3a0 100755
--- a/host/utils/usrp2_recovery.py
+++ b/host/utils/usrp2_recovery.py
@@ -1,6 +1,6 @@
#!/usr/bin/env python
#
-# Copyright 2010 Ettus Research LLC
+# Copyright 2010-2011 Ettus Research LLC
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -39,7 +39,7 @@ RECOVERY_ETHERTYPE = 0xbeee
IP_RECOVERY_CODE = 'addr'
def mac_addr_repr_to_binary_string(mac_addr):
- return ''.join(map(lambda x: chr(int(x, 16)), mac_addr.split(':')))
+ return ''.join([chr(int(x, 16)) for x in mac_addr.split(':')])
if __name__ == '__main__':
parser = optparse.OptionParser(usage='usage: %prog [options]\n'+__doc__)
@@ -48,12 +48,12 @@ if __name__ == '__main__':
(options, args) = parser.parse_args()
#create the raw socket
- print "Opening raw socket on interface:", options.ifc
+ print("Opening raw socket on interface:", options.ifc)
soc = socket.socket(socket.PF_PACKET, socket.SOCK_RAW)
soc.bind((options.ifc, RECOVERY_ETHERTYPE))
#create the recovery packet
- print "Loading packet with ip address:", options.new_ip
+ print("Loading packet with ip address:", options.new_ip)
packet = struct.pack(
'!6s6sH4s4s',
mac_addr_repr_to_binary_string(BCAST_MAC_ADDR),
@@ -63,6 +63,6 @@ if __name__ == '__main__':
socket.inet_aton(options.new_ip),
)
- print "Sending packet (%d bytes)"%len(packet)
+ print("Sending packet (%d bytes)"%len(packet))
soc.send(packet)
- print "Done"
+ print("Done")
diff --git a/host/utils/usrp_n2xx_net_burner.py b/host/utils/usrp_n2xx_net_burner.py
index c715f3364..0b64f2008 100755
--- a/host/utils/usrp_n2xx_net_burner.py
+++ b/host/utils/usrp_n2xx_net_burner.py
@@ -92,7 +92,7 @@ def unpack_flash_info_fmt(s):
def unpack_flash_ip_fmt(s):
return struct.unpack(FLASH_IP_FMT, s) #(proto_ver, pktid, seq, ip_addr)
-def pack_flash_args_fmt(proto_ver, pktid, seq, flash_addr, length, data):
+def pack_flash_args_fmt(proto_ver, pktid, seq, flash_addr, length, data=bytes()):
return struct.pack(FLASH_ARGS_FMT, proto_ver, pktid, seq, flash_addr, length, data)
def pack_flash_info_fmt(proto_ver, pktid, seq, sector_size_bytes, memory_size_bytes):
@@ -100,19 +100,12 @@ def pack_flash_info_fmt(proto_ver, pktid, seq, sector_size_bytes, memory_size_by
def is_valid_fpga_image(fpga_image):
for i in range(0,63):
- if ord(fpga_image[i]) == 0xFF:
- continue
- if ord(fpga_image[i]) == 0xAA and ord(fpga_image[i+1]) == 0x99:
- return 1
-
- return 0
+ if fpga_image[i:i+1] == bytes(b'\xFF'): continue
+ if fpga_image[i:i+2] == bytes(b'\xAA\x99'): return True
+ return False
def is_valid_fw_image(fw_image):
- for i in range(0,4):
- if ord(fw_image[i]) != 0x0B:
- return 0;
-
- return 1
+ return fw_image[:4] == bytes(b'\x0B\x0B\x0B\x0B')
########################################################################
# Burner class, holds a socket and send/recv routines
@@ -135,32 +128,32 @@ class burner_socket(object):
#just here to validate comms
def init_update(self):
- out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_OHAI_LOL, seq(), 0, 0, "")
+ out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_OHAI_LOL, seq(), 0, 0)
try: in_pkt = self.send_and_recv(out_pkt)
- except socket.timeout: raise Exception, "No response from device"
+ except socket.timeout: raise Exception("No response from device")
(proto_ver, pktid, rxseq, ip_addr) = unpack_flash_ip_fmt(in_pkt)
if pktid == update_id_t.USRP2_FW_UPDATE_ID_OHAI_OMG:
- print "USRP-N2XX found."
+ print("USRP-N2XX found.")
else:
- raise Exception, "Invalid reply received from device."
+ raise Exception("Invalid reply received from device.")
# print "Incoming:\n\tVer: %i\n\tID: %c\n\tSeq: %i\n\tIP: %i\n" % (proto_ver, chr(pktid), rxseq, ip_addr)
def get_flash_info(self):
- out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_WATS_TEH_FLASH_INFO_LOL, seq(), 0, 0, "")
+ out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_WATS_TEH_FLASH_INFO_LOL, seq(), 0, 0)
in_pkt = self.send_and_recv(out_pkt)
(proto_ver, pktid, rxseq, sector_size_bytes, memory_size_bytes) = unpack_flash_info_fmt(in_pkt)
if pktid != update_id_t.USRP2_FW_UPDATE_ID_HERES_TEH_FLASH_INFO_OMG:
- raise Exception, "Invalid reply %c from device." % (chr(pktid))
+ raise Exception("Invalid reply %c from device." % (chr(pktid)))
return (memory_size_bytes, sector_size_bytes)
def burn_fw(self, fw, fpga, reset, safe):
(flash_size, sector_size) = self.get_flash_info()
- print "Flash size: %i\nSector size: %i\n\n" % (flash_size, sector_size)
+ print("Flash size: %i\nSector size: %i\n\n" % (flash_size, sector_size))
if fpga:
if safe: image_location = SAFE_FPGA_IMAGE_LOCATION_ADDR
@@ -170,20 +163,18 @@ class burner_socket(object):
fpga_image = fpga_file.read()
if len(fpga_image) > FPGA_IMAGE_SIZE_BYTES:
- print "Error: FPGA image file too large."
- return 0
+ raise Exception("Error: FPGA image file too large.")
if not is_valid_fpga_image(fpga_image):
- print "Error: Invalid FPGA image file."
- return 0
+ raise Exception("Error: Invalid FPGA image file.")
- print "Begin FPGA write: this should take about 1 minute..."
+ print("Begin FPGA write: this should take about 1 minute...")
start_time = time.time()
self.erase_image(image_location, FPGA_IMAGE_SIZE_BYTES)
self.write_image(fpga_image, image_location)
self.verify_image(fpga_image, image_location)
- print "Time elapsed: %f seconds"%(time.time() - start_time)
- print "\n\n"
+ print("Time elapsed: %f seconds"%(time.time() - start_time))
+ print("\n\n")
if fw:
if safe: image_location = SAFE_FW_IMAGE_LOCATION_ADDR
@@ -193,25 +184,23 @@ class burner_socket(object):
fw_image = fw_file.read()
if len(fw_image) > FW_IMAGE_SIZE_BYTES:
- print "Error: Firmware image file too large."
- return 0
+ raise Exception("Error: Firmware image file too large.")
if not is_valid_fw_image(fw_image):
- print "Error: Invalid firmware image file."
- return 0
+ raise Exception("Error: Invalid firmware image file.")
- print "Begin firmware write: this should take about 1 second..."
+ print("Begin firmware write: this should take about 1 second...")
start_time = time.time()
self.erase_image(image_location, FW_IMAGE_SIZE_BYTES)
self.write_image(fw_image, image_location)
self.verify_image(fw_image, image_location)
- print "Time elapsed: %f seconds"%(time.time() - start_time)
- print "\n\n"
+ print("Time elapsed: %f seconds"%(time.time() - start_time))
+ print("\n\n")
if reset: self.reset_usrp()
def write_image(self, image, addr):
- print "Writing image"
+ print("Writing image")
self._status_cb("Writing")
writedata = image
#we split the image into smaller (256B) bits and send them down the wire
@@ -222,64 +211,64 @@ class burner_socket(object):
(proto_ver, pktid, rxseq, flash_addr, rxlength, data) = unpack_flash_args_fmt(in_pkt)
if pktid != update_id_t.USRP2_FW_UPDATE_ID_WROTE_TEH_FLASHES_OMG:
- raise Exception, "Invalid reply %c from device." % (chr(pktid))
+ raise Exception("Invalid reply %c from device." % (chr(pktid)))
writedata = writedata[FLASH_DATA_PACKET_SIZE:]
addr += FLASH_DATA_PACKET_SIZE
self._progress_cb(float(len(image)-len(writedata))/len(image))
def verify_image(self, image, addr):
- print "Verifying data"
+ print("Verifying data")
self._status_cb("Verifying")
readsize = len(image)
- readdata = str()
+ readdata = bytes()
while readsize > 0:
if readsize < FLASH_DATA_PACKET_SIZE: thisreadsize = readsize
else: thisreadsize = FLASH_DATA_PACKET_SIZE
- out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_READ_TEH_FLASHES_LOL, seq(), addr, thisreadsize, "")
+ out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_READ_TEH_FLASHES_LOL, seq(), addr, thisreadsize)
in_pkt = self.send_and_recv(out_pkt)
(proto_ver, pktid, rxseq, flash_addr, rxlength, data) = unpack_flash_args_fmt(in_pkt)
if pktid != update_id_t.USRP2_FW_UPDATE_ID_KK_READ_TEH_FLASHES_OMG:
- raise Exception, "Invalid reply %c from device." % (chr(pktid))
+ raise Exception("Invalid reply %c from device." % (chr(pktid)))
readdata += data[:thisreadsize]
readsize -= FLASH_DATA_PACKET_SIZE
addr += FLASH_DATA_PACKET_SIZE
self._progress_cb(float(len(readdata))/len(image))
- print "Read back %i bytes" % len(readdata)
+ print("Read back %i bytes" % len(readdata))
# print readdata
# for i in range(256, 512):
# print "out: %i in: %i" % (ord(image[i]), ord(readdata[i]))
if readdata != image:
- raise Exception, "Verify failed. Image did not write correctly."
+ raise Exception("Verify failed. Image did not write correctly.")
else:
- print "Success."
+ print("Success.")
def read_image(self, image, size, addr):
- print "Reading image"
+ print("Reading image")
readsize = size
readdata = str()
while readsize > 0:
if readsize < FLASH_DATA_PACKET_SIZE: thisreadsize = readsize
else: thisreadsize = FLASH_DATA_PACKET_SIZE
- out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_READ_TEH_FLASHES_LOL, seq(), addr, thisreadsize, "")
+ out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_READ_TEH_FLASHES_LOL, seq(), addr, thisreadsize)
in_pkt = self.send_and_recv(out_pkt)
(proto_ver, pktid, rxseq, flash_addr, rxlength, data) = unpack_flash_args_fmt(in_pkt)
if pktid != update_id_t.USRP2_FW_UPDATE_ID_KK_READ_TEH_FLASHES_OMG:
- raise Exception, "Invalid reply %c from device." % (chr(pktid))
+ raise Exception("Invalid reply %c from device." % (chr(pktid)))
readdata += data[:thisreadsize]
readsize -= FLASH_DATA_PACKET_SIZE
addr += FLASH_DATA_PACKET_SIZE
- print "Read back %i bytes" % len(readdata)
+ print("Read back %i bytes" % len(readdata))
#write to disk
f = open(image, 'w')
@@ -287,38 +276,38 @@ class burner_socket(object):
f.close()
def reset_usrp(self):
- out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_RESET_MAH_COMPUTORZ_LOL, seq(), 0, 0, "")
+ out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_RESET_MAH_COMPUTORZ_LOL, seq(), 0, 0)
try: in_pkt = self.send_and_recv(out_pkt)
except socket.timeout: return
(proto_ver, pktid, rxseq, flash_addr, rxlength, data) = unpack_flash_args_fmt(in_pkt)
if pktid == update_id_t.USRP2_FW_UPDATE_ID_RESETTIN_TEH_COMPUTORZ_OMG:
- raise Exception, "Device failed to reset."
+ raise Exception("Device failed to reset.")
def erase_image(self, addr, length):
self._status_cb("Erasing")
#get flash info first
- out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_ERASE_TEH_FLASHES_LOL, seq(), addr, length, "")
+ out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_ERASE_TEH_FLASHES_LOL, seq(), addr, length)
in_pkt = self.send_and_recv(out_pkt)
(proto_ver, pktid, rxseq, flash_addr, rxlength, data) = unpack_flash_args_fmt(in_pkt)
if pktid != update_id_t.USRP2_FW_UPDATE_ID_ERASING_TEH_FLASHES_OMG:
- raise Exception, "Invalid reply %c from device." % (chr(pktid))
+ raise Exception("Invalid reply %c from device." % (chr(pktid)))
- print "Erasing %i bytes at %i" % (length, addr)
+ print("Erasing %i bytes at %i" % (length, addr))
start_time = time.time()
#now wait for it to finish
while(True):
- out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_R_U_DONE_ERASING_LOL, seq(), 0, 0, "")
+ out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_R_U_DONE_ERASING_LOL, seq(), 0, 0)
in_pkt = self.send_and_recv(out_pkt)
(proto_ver, pktid, rxseq, flash_addr, rxlength, data) = unpack_flash_args_fmt(in_pkt)
if pktid == update_id_t.USRP2_FW_UPDATE_ID_IM_DONE_ERASING_OMG: break
elif pktid != update_id_t.USRP2_FW_UPDATE_ID_NOPE_NOT_DONE_ERASING_OMG:
- raise Exception, "Invalid reply %c from device." % (chr(pktid))
+ raise Exception("Invalid reply %c from device." % (chr(pktid)))
time.sleep(0.01) #decrease network overhead by waiting a bit before polling
self._progress_cb(min(1.0, (time.time() - start_time)/(length/80e3)))
@@ -343,14 +332,14 @@ def get_options():
########################################################################
if __name__=='__main__':
options = get_options()
- if not options.addr: raise Exception, 'no address specified'
+ if not options.addr: raise Exception('no address specified')
- if not options.fpga and not options.fw and not options.reset: raise Exception, 'Must specify either a firmware image or FPGA image, and/or reset.'
+ if not options.fpga and not options.fw and not options.reset: raise Exception('Must specify either a firmware image or FPGA image, and/or reset.')
if options.overwrite_safe and not options.read:
print("Are you REALLY, REALLY sure you want to overwrite the safe image? This is ALMOST ALWAYS a terrible idea.")
print("If your image is faulty, your USRP2+ will become a brick until reprogrammed via JTAG.")
- response = raw_input("""Type "yes" to continue, or anything else to quit: """)
+ response = input("""Type "yes" to continue, or anything else to quit: """)
if response != "yes": sys.exit(0)
burner = burner_socket(addr=options.addr)
@@ -359,7 +348,7 @@ if __name__=='__main__':
if options.fw:
file = options.fw
if os.path.isfile(file):
- response = raw_input("File already exists -- overwrite? (y/n) ")
+ response = input("File already exists -- overwrite? (y/n) ")
if response != "y": sys.exit(0)
size = FW_IMAGE_SIZE_BYTES
addr = SAFE_FW_IMAGE_LOCATION_ADDR if options.overwrite_safe else PROD_FW_IMAGE_LOCATION_ADDR
@@ -368,7 +357,7 @@ if __name__=='__main__':
if options.fpga:
file = options.fpga
if os.path.isfile(file):
- response = raw_input("File already exists -- overwrite? (y/n) ")
+ response = input("File already exists -- overwrite? (y/n) ")
if response != "y": sys.exit(0)
size = FPGA_IMAGE_SIZE_BYTES
addr = SAFE_FPGA_IMAGE_LOCATION_ADDR if options.overwrite_safe else PROD_FPGA_IMAGE_LOCATION_ADDR
diff --git a/host/utils/usrp_n2xx_net_burner_gui.py b/host/utils/usrp_n2xx_net_burner_gui.py
index 7fcb7d121..3b414a918 100755
--- a/host/utils/usrp_n2xx_net_burner_gui.py
+++ b/host/utils/usrp_n2xx_net_burner_gui.py
@@ -16,12 +16,18 @@
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
-import threading
import usrp_n2xx_net_burner #import implementation
-import Tkinter, tkFileDialog, tkFont, tkMessageBox
+try:
+ import tkinter, tkinter.filedialog, tkinter.font, tkinter.messagebox
+except ImportError:
+ import tkFileDialog, tkFont, tkMessageBox
+ import Tkinter as tkinter
+ tkinter.filedialog = tkFileDialog
+ tkinter.font = tkFont
+ tkinter.messagebox = tkMessageBox
import os
-class BinFileEntry(Tkinter.Frame):
+class BinFileEntry(tkinter.Frame):
"""
Simple file entry widget for getting the file path of bin files.
Combines a label, entry, and button with file dialog callback.
@@ -29,15 +35,15 @@ class BinFileEntry(Tkinter.Frame):
def __init__(self, root, what, def_path=''):
self._what = what
- Tkinter.Frame.__init__(self, root)
- Tkinter.Label(self, text=what+":").pack(side=Tkinter.LEFT)
- self._entry = Tkinter.Entry(self, width=50)
- self._entry.insert(Tkinter.END, def_path)
- self._entry.pack(side=Tkinter.LEFT)
- Tkinter.Button(self, text="...", command=self._button_cb).pack(side=Tkinter.LEFT)
+ tkinter.Frame.__init__(self, root)
+ tkinter.Label(self, text=what+":").pack(side=tkinter.LEFT)
+ self._entry = tkinter.Entry(self, width=50)
+ self._entry.insert(tkinter.END, def_path)
+ self._entry.pack(side=tkinter.LEFT)
+ tkinter.Button(self, text="...", command=self._button_cb).pack(side=tkinter.LEFT)
def _button_cb(self):
- filename = tkFileDialog.askopenfilename(
+ filename = tkinter.filedialog.askopenfilename(
parent=self,
filetypes=[('bin files', '*.bin'), ('all files', '*.*')],
title="Select bin file for %s"%self._what,
@@ -46,13 +52,13 @@ class BinFileEntry(Tkinter.Frame):
# open file on your own
if filename:
- self._entry.delete(0, Tkinter.END)
+ self._entry.delete(0, tkinter.END)
self._entry.insert(0, filename)
def get_filename(self):
return self._entry.get()
-class ProgressBar(Tkinter.Canvas):
+class ProgressBar(tkinter.Canvas):
"""
A simple implementation of a progress bar.
Draws rectangle that fills from left to right.
@@ -61,7 +67,7 @@ class ProgressBar(Tkinter.Canvas):
def __init__(self, root, width=500, height=20):
self._width = width
self._height = height
- Tkinter.Canvas.__init__(self, root, relief="sunken", borderwidth=2, width=self._width-2, height=self._height-2)
+ tkinter.Canvas.__init__(self, root, relief="sunken", borderwidth=2, width=self._width-2, height=self._height-2)
self._last_fill_pixels = None
self.set(0.0)
@@ -78,20 +84,20 @@ class ProgressBar(Tkinter.Canvas):
if frac: self.create_rectangle(0, 0, fill_pixels, self._height, fill="#357EC7")
else: self.create_rectangle(0, 0, self._width, self._height, fill="#E8E8E8")
-class SectionLabel(Tkinter.Label):
+class SectionLabel(tkinter.Label):
"""
Make a text label with bold font.
"""
def __init__(self, root, text):
- Tkinter.Label.__init__(self, root, text=text)
+ tkinter.Label.__init__(self, root, text=text)
#set the font bold
- f = tkFont.Font(font=self['font'])
+ f = tkinter.font.Font(font=self['font'])
f['weight'] = 'bold'
self['font'] = f.name
-class USRPN2XXNetBurnerApp(Tkinter.Frame):
+class USRPN2XXNetBurnerApp(tkinter.Frame):
"""
The top level gui application for the usrp-n2xx network burner.
Creates entry widgets and button with callback to write images.
@@ -99,7 +105,7 @@ class USRPN2XXNetBurnerApp(Tkinter.Frame):
def __init__(self, root, addr, fw, fpga):
- Tkinter.Frame.__init__(self, root)
+ tkinter.Frame.__init__(self, root)
#pack the file entry widgets
SectionLabel(self, text="Select Images").pack(pady=5)
@@ -110,30 +116,28 @@ class USRPN2XXNetBurnerApp(Tkinter.Frame):
#pack the destination entry widget
SectionLabel(self, text="Select Address").pack(pady=5)
- self._addr_entry = Tkinter.Entry(self, width=30)
- self._addr_entry.insert(Tkinter.END, addr)
+ self._addr_entry = tkinter.Entry(self, width=30)
+ self._addr_entry.insert(tkinter.END, addr)
self._addr_entry.pack()
#the do it button
SectionLabel(self, text="").pack(pady=5)
- button = Tkinter.Button(self, text="Burn Images", command=self._burn)
- self._enable_input = lambda: button.configure(state=Tkinter.NORMAL)
- self._disable_input = lambda: button.configure(state=Tkinter.DISABLED)
+ button = tkinter.Button(self, text="Burn Images", command=self._burn)
+ self._enable_input = lambda: button.configure(state=tkinter.NORMAL)
+ self._disable_input = lambda: button.configure(state=tkinter.DISABLED)
button.pack()
#a progress bar to monitor the status
- progress_frame = Tkinter.Frame(self)
+ progress_frame = tkinter.Frame(self)
progress_frame.pack()
- self._status = Tkinter.StringVar()
- Tkinter.Label(progress_frame, textvariable=self._status).pack(side=Tkinter.LEFT)
+ self._status = tkinter.StringVar()
+ tkinter.Label(progress_frame, textvariable=self._status).pack(side=tkinter.LEFT)
self._pbar = ProgressBar(progress_frame)
- self._pbar.pack(side=Tkinter.RIGHT, expand=True)
+ self._pbar.pack(side=tkinter.RIGHT, expand=True)
def _burn(self):
self._disable_input()
- threading.Thread(target=self._burn_bg).start()
- def _burn_bg(self):
#grab strings from the gui
fw = self._fw_img_entry.get_filename()
fpga = self._fpga_img_entry.get_filename()
@@ -141,16 +145,16 @@ class USRPN2XXNetBurnerApp(Tkinter.Frame):
#check input
if not addr:
- tkMessageBox.showerror('Error:', 'No address specified!')
+ tkinter.messagebox.showerror('Error:', 'No address specified!')
return
if not fw and not fpga:
- tkMessageBox.showerror('Error:', 'No images specified!')
+ tkinter.messagebox.showerror('Error:', 'No images specified!')
return
if fw and not os.path.exists(fw):
- tkMessageBox.showerror('Error:', 'Firmware image not found!')
+ tkinter.messagebox.showerror('Error:', 'Firmware image not found!')
return
if fpga and not os.path.exists(fpga):
- tkMessageBox.showerror('Error:', 'FPGA image not found!')
+ tkinter.messagebox.showerror('Error:', 'FPGA image not found!')
return
try:
@@ -162,14 +166,18 @@ class USRPN2XXNetBurnerApp(Tkinter.Frame):
def status_cb(status):
self._pbar.set(0.0) #status change, reset the progress
self._status.set("%s %s "%(status.title(), image_type))
- burner.set_callbacks(progress_cb=self._pbar.set, status_cb=status_cb)
+ self.update()
+ def progress_cb(progress):
+ self._pbar.set(progress)
+ self.update()
+ burner.set_callbacks(progress_cb=progress_cb, status_cb=status_cb)
burner.burn_fw(fw=fw_img, fpga=fpga_img, reset=False, safe=False)
- if tkMessageBox.askyesno("Burn was successful!", "Reset the device?"):
+ if tkinter.messagebox.askyesno("Burn was successful!", "Reset the device?"):
burner.reset_usrp()
- except Exception, e:
- tkMessageBox.showerror('Verbose:', 'Error: %s'%str(e))
+ except Exception as e:
+ tkinter.messagebox.showerror('Verbose:', 'Error: %s'%str(e))
#reset the progress bar
self._pbar.set(0.0)
@@ -181,7 +189,7 @@ class USRPN2XXNetBurnerApp(Tkinter.Frame):
########################################################################
if __name__=='__main__':
options = usrp_n2xx_net_burner.get_options()
- root = Tkinter.Tk()
+ root = tkinter.Tk()
root.title('USRP-N2XX Net Burner')
USRPN2XXNetBurnerApp(root, addr=options.addr, fw=options.fw, fpga=options.fpga).pack()
root.mainloop()
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 06:36:04 +0000