diff options
Diffstat (limited to 'host')
322 files changed, 44934 insertions, 0 deletions
diff --git a/host/.gitignore b/host/.gitignore new file mode 100644 index 000000000..796b96d1c --- /dev/null +++ b/host/.gitignore @@ -0,0 +1 @@ +/build diff --git a/host/AUTHORS b/host/AUTHORS new file mode 100644 index 000000000..512d4752e --- /dev/null +++ b/host/AUTHORS @@ -0,0 +1,30 @@ +Matt Ettus - matt@ettus.com + USRP1 FPGA code + USRP2 FPGA code + +Josh Blum - josh@ettus.com + driver framework + USRP2 firmware + USRP2 host code + Basic/LF host code + XCVR2450 host code + RFX Series host code + +Jason Abele - jason@ettus.com + RFX Series host code + WBX host code + +Eric Blossom - eb@comsec.com + USRP1 firmware + USRP2 firmware + +Tom Tsou - ttsou@vt.edu + UHD-USB framework + LIBUSB host code + USRP1 host code + USRP1 firmware + +Nick Foster - nick@ettus.com + LIBUSB host code + USRP1 host code + TVRX host code diff --git a/host/CMakeLists.txt b/host/CMakeLists.txt new file mode 100644 index 000000000..bbcf34373 --- /dev/null +++ b/host/CMakeLists.txt @@ -0,0 +1,209 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +#IF(${CMAKE_SOURCE_DIR} STREQUAL ${CMAKE_BINARY_DIR}) +# MESSAGE(FATAL_ERROR "Prevented in-tree built. This is bad practice.") +#ENDIF(${CMAKE_SOURCE_DIR} STREQUAL ${CMAKE_BINARY_DIR}) + +######################################################################## +# Project setup +######################################################################## +CMAKE_MINIMUM_REQUIRED(VERSION 2.6) +PROJECT(UHD CXX) +ENABLE_TESTING() +LIST(APPEND CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/Modules) +INCLUDE(UHDComponent) #enable components +INCLUDE(UHDPackage) #setup cpack + +######################################################################## +# Install Dirs +######################################################################## +SET(LIB_SUFFIX ${LIB_SUFFIX} CACHE STRING "lib directory suffix") +SET(RUNTIME_DIR bin) +SET(LIBRARY_DIR lib${LIB_SUFFIX}) +SET(INCLUDE_DIR include) +SET(PKG_DATA_DIR share/uhd) +SET(PKG_DOC_DIR share/doc/uhd) + +######################################################################## +# Local Include Dir +######################################################################## +INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/include) + +######################################################################## +# Optional Compiler Flags +######################################################################## +INCLUDE(CheckCXXCompilerFlag) +MACRO(UHD_ADD_OPTIONAL_CXX_COMPILER_FLAG flag have) + CHECK_CXX_COMPILER_FLAG(${flag} ${have}) + IF(${have}) + ADD_DEFINITIONS(${flag}) + ENDIF(${have}) +ENDMACRO(UHD_ADD_OPTIONAL_CXX_COMPILER_FLAG) + +#select the release build type by default to get optimization flags +IF(NOT CMAKE_BUILD_TYPE) + SET(CMAKE_BUILD_TYPE "Release") + MESSAGE(STATUS "Build type not specified: defaulting to release.") +ENDIF(NOT CMAKE_BUILD_TYPE) +SET(CMAKE_BUILD_TYPE "${CMAKE_BUILD_TYPE}" CACHE STRING "") + +IF(CMAKE_COMPILER_IS_GNUCXX) + ADD_DEFINITIONS(-Wall) + ADD_DEFINITIONS(-Wextra) + #ADD_DEFINITIONS(-pedantic) + #ADD_DEFINITIONS(-ansi) + #only export symbols that are declared to be part of the uhd api: + UHD_ADD_OPTIONAL_CXX_COMPILER_FLAG(-fvisibility=hidden HAVE_VISIBILITY_HIDDEN) +ENDIF(CMAKE_COMPILER_IS_GNUCXX) + +IF(MSVC) + INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/msvc) + ADD_DEFINITIONS(-D_WIN32_WINNT=0x0501) #minimum version required is windows xp + ADD_DEFINITIONS(-DNOMINMAX) #disables stupidity and enables std::min and std::max + ADD_DEFINITIONS( #stop all kinds of compatibility warnings + -D_SCL_SECURE_NO_WARNINGS + -D_CRT_SECURE_NO_WARNINGS + -D_CRT_SECURE_NO_DEPRECATE + -D_CRT_NONSTDC_NO_DEPRECATE + ) +ENDIF(MSVC) + +######################################################################## +# Setup Boost +######################################################################## +SET(BOOST_REQUIRED_COMPONENTS + date_time + filesystem + program_options + regex + system + thread + unit_test_framework +) + +IF(UNIX AND EXISTS "/usr/lib64") + LIST(APPEND BOOST_LIBRARYDIR "/usr/lib64") #fedora 64-bit fix +ENDIF(UNIX AND EXISTS "/usr/lib64") + +IF(MSVC) + SET(BOOST_ALL_DYN_LINK "${BOOST_ALL_DYN_LINK}" CACHE BOOL "boost enable dynamic linking") + IF(BOOST_ALL_DYN_LINK) + ADD_DEFINITIONS(-DBOOST_ALL_DYN_LINK) #setup boost auto-linking in msvc + ELSE(BOOST_ALL_DYN_LINK) + UNSET(BOOST_REQUIRED_COMPONENTS) #empty components list for static link + ENDIF(BOOST_ALL_DYN_LINK) +ENDIF(MSVC) + +SET(Boost_ADDITIONAL_VERSIONS "1.42.0" "1.42" "1.43.0" "1.43" "1.44.0" "1.44") +FIND_PACKAGE(Boost ${BOOST_MIN_VERSION} COMPONENTS ${BOOST_REQUIRED_COMPONENTS}) + +INCLUDE_DIRECTORIES(${Boost_INCLUDE_DIRS}) +LINK_DIRECTORIES(${Boost_LIBRARY_DIRS}) + +######################################################################## +# Check Python Modules +######################################################################## +INCLUDE(UHDPython) + +PYTHON_CHECK_MODULE( + "Python version 2.6 or greater" + "platform" "platform.python_version() >= '2.6'" + HAVE_PYTHON_PLAT_MIN_VERSION +) + +PYTHON_CHECK_MODULE( + "Cheetah templates 2.0.0 or greater" + "Cheetah" "Cheetah.Version >= '2.0.0'" + HAVE_PYTHON_MODULE_CHEETAH +) + +######################################################################## +# Create Uninstall Target +######################################################################## +CONFIGURE_FILE( + ${CMAKE_CURRENT_SOURCE_DIR}/cmake_uninstall.cmake.in + ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake +@ONLY) + +ADD_CUSTOM_TARGET(uninstall + ${CMAKE_COMMAND} -P ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake +) + +######################################################################## +# Create Pkg Config File +######################################################################## +CONFIGURE_FILE( + ${CMAKE_CURRENT_SOURCE_DIR}/uhd.pc.in + ${CMAKE_CURRENT_BINARY_DIR}/uhd.pc +@ONLY) + +INSTALL( + FILES ${CMAKE_CURRENT_BINARY_DIR}/uhd.pc + DESTINATION ${LIBRARY_DIR}/pkgconfig +) + +######################################################################## +# Install Package Docs +######################################################################## +INSTALL(FILES + ${CMAKE_CURRENT_SOURCE_DIR}/README + ${CMAKE_CURRENT_SOURCE_DIR}/LICENSE + ${CMAKE_CURRENT_SOURCE_DIR}/AUTHORS + DESTINATION ${PKG_DOC_DIR} +) + +######################################################################## +# Register top level components +######################################################################## +LIBUHD_REGISTER_COMPONENT("LibUHD" ENABLE_LIBUHD ON "Boost_FOUND;HAVE_PYTHON_PLAT_MIN_VERSION;HAVE_PYTHON_MODULE_CHEETAH" OFF) +LIBUHD_REGISTER_COMPONENT("Examples" ENABLE_EXAMPLES ON "ENABLE_LIBUHD" OFF) +LIBUHD_REGISTER_COMPONENT("Utils" ENABLE_UTILS ON "ENABLE_LIBUHD" OFF) +LIBUHD_REGISTER_COMPONENT("Tests" ENABLE_TESTS ON "ENABLE_LIBUHD" OFF) + +######################################################################## +# Add the subdirectories +######################################################################## +ADD_SUBDIRECTORY(docs) + +IF(ENABLE_EXAMPLES) + ADD_SUBDIRECTORY(examples) +ENDIF(ENABLE_EXAMPLES) + +ADD_SUBDIRECTORY(include) + +IF(ENABLE_LIBUHD) + ADD_SUBDIRECTORY(lib) +ENDIF(ENABLE_LIBUHD) + +IF(ENABLE_TESTS) + ADD_SUBDIRECTORY(tests) +ENDIF(ENABLE_TESTS) + +IF(ENABLE_UTILS) + ADD_SUBDIRECTORY(utils) +ENDIF(ENABLE_UTILS) + +ADD_SUBDIRECTORY(usrp_e_utils) + +######################################################################## +# Print Summary +######################################################################## +UHD_PRINT_COMPONENT_SUMMARY() +MESSAGE(STATUS "Building version: ${CPACK_PACKAGE_VERSION}") +MESSAGE(STATUS "Using install prefix: ${CMAKE_INSTALL_PREFIX}") diff --git a/host/LICENSE b/host/LICENSE new file mode 100644 index 000000000..9aa03b39b --- /dev/null +++ b/host/LICENSE @@ -0,0 +1,12 @@ +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. diff --git a/host/Modules/FindDocutils.cmake b/host/Modules/FindDocutils.cmake new file mode 100644 index 000000000..3a97d8643 --- /dev/null +++ b/host/Modules/FindDocutils.cmake @@ -0,0 +1,21 @@ +# +# Copyright 2011-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +FIND_PROGRAM(RST2HTML_EXECUTABLE rst2html) +INCLUDE(FindPackageHandleStandardArgs) +FIND_PACKAGE_HANDLE_STANDARD_ARGS(Docutils DEFAULT_MSG RST2HTML_EXECUTABLE) diff --git a/host/Modules/FindGit.cmake b/host/Modules/FindGit.cmake new file mode 100644 index 000000000..2d8214287 --- /dev/null +++ b/host/Modules/FindGit.cmake @@ -0,0 +1,46 @@ +# The module defines the following variables: +# GIT_EXECUTABLE - path to git command line client +# GIT_FOUND - true if the command line client was found +# Example usage: +# find_package(Git) +# if(GIT_FOUND) +# message("git found: ${GIT_EXECUTABLE}") +# endif() + +#============================================================================= +# Copyright 2010 Kitware, Inc. +# +# Distributed under the OSI-approved BSD License (the "License"); +# see accompanying file Copyright.txt for details. +# +# This software is distributed WITHOUT ANY WARRANTY; without even the +# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the License for more information. +#============================================================================= +# (To distributed this file outside of CMake, substitute the full +# License text for the above reference.) + +# Look for 'git' or 'eg' (easy git) +# +set(git_names git eg) + +# Prefer .cmd variants on Windows unless running in a Makefile +# in the MSYS shell. +# +if(WIN32) + if(NOT CMAKE_GENERATOR MATCHES "MSYS") + set(git_names git.cmd git eg.cmd eg) + endif() +endif() + +find_program(GIT_EXECUTABLE + NAMES ${git_names} + DOC "git command line client" + ) +mark_as_advanced(GIT_EXECUTABLE) + +# Handle the QUIETLY and REQUIRED arguments and set GIT_FOUND to TRUE if +# all listed variables are TRUE + +include(FindPackageHandleStandardArgs) +find_package_handle_standard_args(Git DEFAULT_MSG GIT_EXECUTABLE) diff --git a/host/Modules/FindUSB1.cmake b/host/Modules/FindUSB1.cmake new file mode 100644 index 000000000..ebcac99eb --- /dev/null +++ b/host/Modules/FindUSB1.cmake @@ -0,0 +1,38 @@ +# - Try to find the freetype library +# Once done this defines +# +# LIBUSB_FOUND - system has libusb +# LIBUSB_INCLUDE_DIR - the libusb include directory +# LIBUSB_LIBRARIES - Link these to use libusb + +# Copyright (c) 2006, 2008 Laurent Montel, <montel@kde.org> +# +# Redistribution and use is allowed according to the terms of the BSD license. +# For details see the accompanying COPYING-CMAKE-SCRIPTS file. + + +if (LIBUSB_INCLUDE_DIR AND LIBUSB_LIBRARIES) + + # in cache already + set(LIBUSB_FOUND TRUE) + +else (LIBUSB_INCLUDE_DIR AND LIBUSB_LIBRARIES) + IF (NOT WIN32) + # use pkg-config to get the directories and then use these values + # in the FIND_PATH() and FIND_LIBRARY() calls + find_package(PkgConfig) + pkg_check_modules(PC_LIBUSB libusb-1.0) + ENDIF(NOT WIN32) + + FIND_PATH(LIBUSB_INCLUDE_DIR libusb.h + PATHS ${PC_LIBUSB_INCLUDEDIR} ${PC_LIBUSB_INCLUDE_DIRS}) + + FIND_LIBRARY(LIBUSB_LIBRARIES NAMES usb-1.0 + PATHS ${PC_LIBUSB_LIBDIR} ${PC_LIBUSB_LIBRARY_DIRS}) + + include(FindPackageHandleStandardArgs) + FIND_PACKAGE_HANDLE_STANDARD_ARGS(LIBUSB DEFAULT_MSG LIBUSB_LIBRARIES LIBUSB_INCLUDE_DIR) + + MARK_AS_ADVANCED(LIBUSB_INCLUDE_DIR LIBUSB_LIBRARIES) + +endif (LIBUSB_INCLUDE_DIR AND LIBUSB_LIBRARIES) diff --git a/host/Modules/UHDComponent.cmake b/host/Modules/UHDComponent.cmake new file mode 100644 index 000000000..4ea55bbb9 --- /dev/null +++ b/host/Modules/UHDComponent.cmake @@ -0,0 +1,77 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +SET(_uhd_enabled_components "" CACHE INTERNAL "" FORCE) +SET(_uhd_disabled_components "" CACHE INTERNAL "" FORCE) + +######################################################################## +# Register a component into the system +# - name the component string name +# - var the global enable variable +# - enb the default enable setting +# - deps a list of dependencies +# - dis the default disable setting +######################################################################## +MACRO(LIBUHD_REGISTER_COMPONENT name var enb deps dis) + MESSAGE(STATUS "") + MESSAGE(STATUS "Configuring ${name} support...") + FOREACH(dep ${deps}) + MESSAGE(STATUS " Dependency ${dep} = ${${dep}}") + ENDFOREACH(dep) + + #setup the dependent option for this component + INCLUDE(CMakeDependentOption) + CMAKE_DEPENDENT_OPTION(${var} "enable ${name} support" ${enb} "${deps}" ${dis}) + + #append the component into one of the lists + IF(${var}) + MESSAGE(STATUS " Enabling ${name} support.") + LIST(APPEND _uhd_enabled_components ${name}) + ELSE(${var}) + MESSAGE(STATUS " Disabling ${name} support.") + LIST(APPEND _uhd_disabled_components ${name}) + ENDIF(${var}) + MESSAGE(STATUS " Override with -D${var}=ON/OFF") + + #make components lists into global variables + SET(_uhd_enabled_components ${_uhd_enabled_components} CACHE INTERNAL "" FORCE) + SET(_uhd_disabled_components ${_uhd_disabled_components} CACHE INTERNAL "" FORCE) +ENDMACRO(LIBUHD_REGISTER_COMPONENT) + +######################################################################## +# Print the registered component summary +######################################################################## +FUNCTION(UHD_PRINT_COMPONENT_SUMMARY) + MESSAGE(STATUS "") + MESSAGE(STATUS "######################################################") + MESSAGE(STATUS "# UHD enabled components ") + MESSAGE(STATUS "######################################################") + FOREACH(comp ${_uhd_enabled_components}) + MESSAGE(STATUS " * ${comp}") + ENDFOREACH(comp) + + MESSAGE(STATUS "") + MESSAGE(STATUS "######################################################") + MESSAGE(STATUS "# UHD disabled components ") + MESSAGE(STATUS "######################################################") + FOREACH(comp ${_uhd_disabled_components}) + MESSAGE(STATUS " * ${comp}") + ENDFOREACH(comp) + + MESSAGE(STATUS "") +ENDFUNCTION(UHD_PRINT_COMPONENT_SUMMARY) diff --git a/host/Modules/UHDPackage.cmake b/host/Modules/UHDPackage.cmake new file mode 100644 index 000000000..2a11d407b --- /dev/null +++ b/host/Modules/UHDPackage.cmake @@ -0,0 +1,44 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +INCLUDE(UHDVersion) #sets version information + +######################################################################## +# Setup CPack +######################################################################## +SET(CPACK_PACKAGE_DESCRIPTION_SUMMARY "Ettus Research - Universal Hardware Driver") +SET(CPACK_PACKAGE_VENDOR "Ettus Research LLC") +SET(CPACK_PACKAGE_CONTACT "support@ettus.com") +SET(CPACK_PACKAGE_VERSION_MAJOR ${UHD_VERSION_MAJOR}) +SET(CPACK_PACKAGE_VERSION_MINOR ${UHD_VERSION_MINOR}) +SET(CPACK_PACKAGE_VERSION_PATCH ${UHD_VERSION_PATCH}) +SET(CPACK_RESOURCE_FILE_README ${CMAKE_SOURCE_DIR}/README) +SET(CPACK_RESOURCE_FILE_LICENSE ${CMAKE_SOURCE_DIR}/LICENSE) +SET(BOOST_MIN_VERSION 1.36) #used in setup for boost +STRING(REPLACE "," ", " CPACK_DEBIAN_PACKAGE_DEPENDS + "libboost-date-time-dev (>= ${BOOST_MIN_VERSION})," + "libboost-filesystem-dev (>= ${BOOST_MIN_VERSION})," + "libboost-program-options-dev (>= ${BOOST_MIN_VERSION})," + "libboost-regex-dev (>= ${BOOST_MIN_VERSION})," + "libboost-system-dev (>= ${BOOST_MIN_VERSION})," + "libboost-test-dev (>= ${BOOST_MIN_VERSION})," + "libboost-thread-dev (>= ${BOOST_MIN_VERSION})" +) +SET(CPACK_DEBIAN_PACKAGE_RECOMMENDS "python, python-tk") +SET(CPACK_RPM_PACKAGE_REQUIRES "boost-devel >= ${BOOST_MIN_VERSION}") +INCLUDE(CPack) #include after setting vars diff --git a/host/Modules/UHDPython.cmake b/host/Modules/UHDPython.cmake new file mode 100644 index 000000000..345e0187d --- /dev/null +++ b/host/Modules/UHDPython.cmake @@ -0,0 +1,69 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Setup Python +######################################################################## +#this allows the user to override PYTHON_EXECUTABLE +IF(PYTHON_EXECUTABLE) + + SET(PYTHONINTERP_FOUND TRUE) + +#otherwise if not set, try to automatically find it +ELSE(PYTHON_EXECUTABLE) + + #use the built-in find script + FIND_PACKAGE(PythonInterp) + + #and if that fails use the find program routine + IF(NOT PYTHONINTERP_FOUND) + FIND_PROGRAM(PYTHON_EXECUTABLE NAMES python python2.7 python2.6) + IF(PYTHON_EXECUTABLE) + SET(PYTHONINTERP_FOUND TRUE) + ENDIF(PYTHON_EXECUTABLE) + ENDIF(NOT PYTHONINTERP_FOUND) + +ENDIF(PYTHON_EXECUTABLE) + +#make the path to the executable appear in the cmake gui +SET(PYTHON_EXECUTABLE ${PYTHON_EXECUTABLE} CACHE FILEPATH "python interpreter") + +IF(NOT PYTHONINTERP_FOUND) + MESSAGE(FATAL_ERROR "Error: Python interpretor required by the build system.") +ENDIF(NOT PYTHONINTERP_FOUND) + +MACRO(PYTHON_CHECK_MODULE desc mod cmd have) + MESSAGE(STATUS "") + MESSAGE(STATUS "Python checking for ${desc}") + EXECUTE_PROCESS( + COMMAND ${PYTHON_EXECUTABLE} -c " +######################################### +try: import ${mod} +except: exit(-1) +try: assert ${cmd} +except: exit(-1) +#########################################" + RESULT_VARIABLE ${have} + ) + IF(${have} EQUAL 0) + MESSAGE(STATUS "Python checking for ${desc} - found") + SET(${have} TRUE) + ELSE(${have} EQUAL 0) + MESSAGE(STATUS "Python checking for ${desc} - not found") + SET(${have} FALSE) + ENDIF(${have} EQUAL 0) +ENDMACRO(PYTHON_CHECK_MODULE) diff --git a/host/Modules/UHDVersion.cmake b/host/Modules/UHDVersion.cmake new file mode 100644 index 000000000..b0b2ae475 --- /dev/null +++ b/host/Modules/UHDVersion.cmake @@ -0,0 +1,62 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +INCLUDE(UHDPython) #requires python for parsing + +######################################################################## +# Setup Version Numbers +######################################################################## +SET(UHD_VERSION_MAJOR 003) #API compatibility number +SET(UHD_VERSION_MINOR 0) #Timestamp of git commit +SET(UHD_VERSION_PATCH 0) #Short hash of git commit + +######################################################################## +# Find GIT to get repo information +######################################################################## +FIND_PACKAGE(Git QUIET) +IF(GIT_FOUND) + + #grab the git log entry for the current head + EXECUTE_PROCESS( + WORKING_DIRECTORY ${CMAKE_SOURCE_DIR} + COMMAND ${GIT_EXECUTABLE} log HEAD~..HEAD --date=raw -n1 + OUTPUT_VARIABLE _git_log OUTPUT_STRIP_TRAILING_WHITESPACE + ) + + #extract the timestamp from the git log entry + EXECUTE_PROCESS( + WORKING_DIRECTORY ${CMAKE_SOURCE_DIR} + COMMAND ${PYTHON_EXECUTABLE} -c "import re; print re.match('^.*Date:\\s*(\\d*).*$', ''' ${_git_log} ''', re.MULTILINE | re.DOTALL).groups()[0]" + OUTPUT_VARIABLE _git_timestamp OUTPUT_STRIP_TRAILING_WHITESPACE + ) + + #format the timestamp into YYYY-MM-DD-HH-MM-SS + EXECUTE_PROCESS( + COMMAND ${PYTHON_EXECUTABLE} -c "import time; print time.strftime('%Y%m%d%H%M%S', time.gmtime(${_git_timestamp}))" + OUTPUT_VARIABLE _git_date OUTPUT_STRIP_TRAILING_WHITESPACE + ) + SET(UHD_VERSION_MINOR ${_git_date}) + + #grab the git ref id for the current head + EXECUTE_PROCESS( + WORKING_DIRECTORY ${CMAKE_SOURCE_DIR} + COMMAND ${GIT_EXECUTABLE} rev-parse --short HEAD + OUTPUT_VARIABLE _git_rev OUTPUT_STRIP_TRAILING_WHITESPACE + ) + SET(UHD_VERSION_PATCH ${_git_rev}) +ENDIF(GIT_FOUND) diff --git a/host/README b/host/README new file mode 100644 index 000000000..f3dcde53d --- /dev/null +++ b/host/README @@ -0,0 +1,37 @@ +######################################################################## +# Ettus Research - Universal Hardware Driver +######################################################################## +The hardware driver for Ettus Research products. + +######################################################################## +# Supported USRP Motherboards +######################################################################## +USRP1 +USRP2 +USRP-N200 +USRP-N210 +USRP-E100 + +######################################################################## +# Supported USRP Daughterboards +######################################################################## +Basic RX +Basic TX +LF RX +LF TX +RFX Series +XCVR 2450 +WBX Series +DBSRX +DBSRX2 +TVRX + +######################################################################## +# Documentation +######################################################################## +Online documentation available at: +http://ettus-apps.sourcerepo.com/redmine/ettus/projects/uhd/wiki/ + +The build system can generate the html for the manual and Doxygen. +Docutils and Doxygen are required to build the html docs. +See the docs directory for the manual source (reStructuredText). diff --git a/host/apps/omap_debug/.gitignore b/host/apps/omap_debug/.gitignore new file mode 100644 index 000000000..008a23138 --- /dev/null +++ b/host/apps/omap_debug/.gitignore @@ -0,0 +1,20 @@ +.gitignore +clkgen-config +fpga-downloader +usrp-e-button +usrp-e-crc-rw +usrp-e-ctl +usrp-e-debug-pins +usrp-e-fpga-rw +usrp-e-gpio +usrp-e-i2c +usrp-e-lb-test +usrp-e-led +usrp-e-loopback +usrp-e-random-loopback +usrp-e-rw +usrp-e-spi +usrp-e-timed +usrp-e-uart +usrp-e-uart-rx +usrp-e-mm-loopback diff --git a/host/apps/omap_debug/Makefile b/host/apps/omap_debug/Makefile new file mode 100644 index 000000000..f8b9f2bd9 --- /dev/null +++ b/host/apps/omap_debug/Makefile @@ -0,0 +1,33 @@ +CFLAGS=-Wall -I../../lib/usrp/usrp_e/ -march=armv7-a -mtune=cortex-a8 -mfpu=neon -O3 +CXXFLAGS=-Wall -I../../lib/usrp/usrp_e/ -march=armv7-a -mtune=cortex-a8 -mfpu=neon -O3 + +all : usrp-e-spi usrp-e-i2c usrp-e-uart usrp-e-led usrp-e-ctl usrp-e-button usrp-e-uart-rx usrp-e-gpio usrp-e-debug-pins + +usrp-e-spi : usrp-e-spi.c + +usrp-e-i2c : usrp-e-i2c.c + +usrp-e-uart : usrp-e-uart.c + +usrp-e-uart-rx : usrp-e-uart-rx.c + +usrp-e-led : usrp-e-led.c + +usrp-e-ctl : usrp-e-ctl.c + +usrp-e-button : usrp-e-button.c + +usrp-e-gpio : usrp-e-gpio.c + +usrp-e-debug-pins : usrp-e-debug-pins.c +clean : + rm -f usrp-e-spi + rm -f usrp-e-i2c + rm -f usrp-e-uart + rm -f usrp-e-uart-rx + rm -f usrp-e-led + rm -f usrp-e-ctl + rm -f usrp-e-button + rm -f usrp-e-gpio + rm -f usrp-e-debug-pins + rm -f usrp-e-lb-test diff --git a/host/apps/omap_debug/README b/host/apps/omap_debug/README new file mode 100644 index 000000000..bbe0c2cc4 --- /dev/null +++ b/host/apps/omap_debug/README @@ -0,0 +1 @@ +OMAP development tools go here diff --git a/host/apps/omap_debug/fetch-bin.sh b/host/apps/omap_debug/fetch-bin.sh new file mode 100755 index 000000000..019ddaaf2 --- /dev/null +++ b/host/apps/omap_debug/fetch-bin.sh @@ -0,0 +1,6 @@ +if [ $GHQ ]; then + scp $GHQ_USER@astro:/workspace/usrp1-e-dev/u1e.bin /home/root +else + scp -P 8822 balister@192.168.1.10:src/git/fpgapriv/usrp2/top/u1e/build/u1e.bin /home/root +fi +sync diff --git a/host/apps/omap_debug/fetch-kernel.sh b/host/apps/omap_debug/fetch-kernel.sh new file mode 100755 index 000000000..ce420f3d2 --- /dev/null +++ b/host/apps/omap_debug/fetch-kernel.sh @@ -0,0 +1,7 @@ +if [ $GHQ ]; then + scp $GHQ_USER@astro:/workspace/usrp1-e-dev/kernel_usrp/arch/arm/boot/uImage /media/mmcblk0p1/uImage +else + scp balister@192.168.1.10:src/git/kernel_usrp/arch/arm/boot/uImage /media/mmcblk0p1/uImage +fi +sync + diff --git a/host/apps/omap_debug/fetch-module.sh b/host/apps/omap_debug/fetch-module.sh new file mode 100755 index 000000000..ec28989bd --- /dev/null +++ b/host/apps/omap_debug/fetch-module.sh @@ -0,0 +1,6 @@ +if [ $GHQ ]; then + scp $GHQ_USER@astro:/workspace/usrp1-e-dev/kernel_usrp/drivers/misc/usrp_e.ko /lib/modules/2.6.33/kernel/drivers/misc +else + scp balister@192.168.1.10:src/git/kernel_usrp/drivers/misc/usrp_e.ko /lib/modules/2.6.33/kernel/drivers/misc +fi +sync diff --git a/host/apps/omap_debug/fetch-u-boot.sh b/host/apps/omap_debug/fetch-u-boot.sh new file mode 100755 index 000000000..5309364b8 --- /dev/null +++ b/host/apps/omap_debug/fetch-u-boot.sh @@ -0,0 +1,7 @@ +if [ $GHQ ]; then + scp $GHQ_USER@astro:/workspace/usrp1-e-dev/u-boot-overo/u-boot.bin /media/mmcblk0p1/ +else + scp balister@192.168.1.167:src/git/u-boot/u-boot.bin /media/mmcblk0p1/ +fi +sync + diff --git a/host/apps/omap_debug/read_board_id.sh b/host/apps/omap_debug/read_board_id.sh new file mode 100755 index 000000000..96081f219 --- /dev/null +++ b/host/apps/omap_debug/read_board_id.sh @@ -0,0 +1,10 @@ +#!/bin/sh + +i2cget -y 3 0x51 0x00 b +i2cget -y 3 0x51 0x01 b +i2cget -y 3 0x51 0x02 b +i2cget -y 3 0x51 0x03 b +i2cget -y 3 0x51 0x04 b +i2cget -y 3 0x51 0x05 b + + diff --git a/host/apps/omap_debug/reload-fpga.sh b/host/apps/omap_debug/reload-fpga.sh new file mode 100755 index 000000000..2754718a4 --- /dev/null +++ b/host/apps/omap_debug/reload-fpga.sh @@ -0,0 +1,7 @@ +#!/bin/sh + +rmmod usrp_e +fpga-downloader /home/root/u1e.bin +modprobe usrp_e +usrp-e-debug-pins 1 + diff --git a/host/apps/omap_debug/set_debug_pins.py b/host/apps/omap_debug/set_debug_pins.py new file mode 100755 index 000000000..0f9ecd7b9 --- /dev/null +++ b/host/apps/omap_debug/set_debug_pins.py @@ -0,0 +1,35 @@ +#!/usr/bin/python + +import os + +# Memory Map +misc_base = 0 +uart_base = 1 +spi_base = 2 +i2c_base = 3 +gpio_base = 4 * 128 +settings_base = 5 + +# GPIO offset +gpio_pins = 0 +gpio_ddr = 4 +gpio_ctrl_lo = 8 +gpio_ctrl_hi = 12 + +def set_reg(reg, val): + os.system("./usrp1-e-ctl w %d 1 %d" % (reg,val)) + +def get_reg(reg): + fin,fout = os.popen4("./usrp1-e-ctl r %d 1" % (reg,)) + print fout.read() + +# Set DDRs to output +set_reg(gpio_base+gpio_ddr, 0xFFFF) +set_reg(gpio_base+gpio_ddr+2, 0xFFFF) + +# Set CTRL to Debug #0 ( A is for debug 0, F is for debug 1 ) +set_reg(gpio_base+gpio_ctrl_lo, 0xAAAA) +set_reg(gpio_base+gpio_ctrl_lo+2, 0xAAAA) +set_reg(gpio_base+gpio_ctrl_hi, 0xAAAA) +set_reg(gpio_base+gpio_ctrl_hi+2, 0xAAAA) + diff --git a/host/apps/omap_debug/setup-board-id-eeprom.sh b/host/apps/omap_debug/setup-board-id-eeprom.sh new file mode 100755 index 000000000..4dba1cce5 --- /dev/null +++ b/host/apps/omap_debug/setup-board-id-eeprom.sh @@ -0,0 +1,17 @@ +#!/bin/sh + +i2cset -y 3 0x51 0x00 0x00 +i2cset -y 3 0x51 0x01 0x03 +i2cset -y 3 0x51 0x02 0x00 +i2cset -y 3 0x51 0x03 0x01 +i2cset -y 3 0x51 0x04 0x01 +i2cset -y 3 0x51 0x05 0x00 +i2cset -y 3 0x51 0x06 0x00 + +i2cget -y 3 0x51 0 b +i2cget -y 3 0x51 1 b +i2cget -y 3 0x51 2 b +i2cget -y 3 0x51 3 b +i2cget -y 3 0x51 4 b +i2cget -y 3 0x51 5 b +i2cget -y 3 0x51 6 b diff --git a/host/apps/omap_debug/test.c b/host/apps/omap_debug/test.c new file mode 100644 index 000000000..36f4d700a --- /dev/null +++ b/host/apps/omap_debug/test.c @@ -0,0 +1,34 @@ +#include <stdio.h> + +void +main() +{ + int x; + char *y; + long long z; + + x = 0x01020304; + z = 0x0102030405060708LL; + + printf("%x\n",x); + y = (char *)&x; + printf("%x\n",y[0]); + printf("%x\n",y[1]); + printf("%x\n",y[2]); + printf("%x\n",y[3]); + + printf("Printing z ...\n"); + printf("%llx\n",z); + printf("Printing z done\n"); + + y = (char *)&z; + printf("%x\n",y[0]); + printf("%x\n",y[1]); + printf("%x\n",y[2]); + printf("%x\n",y[3]); + printf("%x\n",y[4]); + printf("%x\n",y[5]); + printf("%x\n",y[6]); + printf("%x\n",y[7]); +} + diff --git a/host/apps/omap_debug/u1e-read-stream.c b/host/apps/omap_debug/u1e-read-stream.c new file mode 100644 index 000000000..4e4c21d9e --- /dev/null +++ b/host/apps/omap_debug/u1e-read-stream.c @@ -0,0 +1,21 @@ +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> + +int main(int rgc, char *argv[]) +{ + int fp, cnt, n; + short buf[1024]; + + n = 0; + + fp = open("/dev/usrp1_e0", O_RDONLY); + printf("fp = %d\n", fp); + + do { + cnt = read(fp, buf, 2048); + n++; +// printf("Bytes read - %d\n", cnt); + } while(n < 10*512); + printf("Data - %hX\n", buf[0]); +} diff --git a/host/apps/omap_debug/usrp-e-button.c b/host/apps/omap_debug/usrp-e-button.c new file mode 100644 index 000000000..f13291491 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-button.c @@ -0,0 +1,56 @@ +#include <stdio.h> +#include <stdlib.h> +#include <sys/types.h> +#include <fcntl.h> +#include <string.h> +#include <sys/ioctl.h> +#include <unistd.h> + +#include "usrp_e.h" +#include "usrp_e_regs.hpp" + +// Usage: usrp_e_uart <string> + +#define PB1 (1<<8) +#define PB2 (1<<9) +#define PB3 (1<<10) +#define P1 (0) +#define P2 (0xFF) +#define P3 (0xAA) +#define P4 (0x55) + +int main(int argc, char *argv[]) +{ + int fp, ret; + struct usrp_e_ctl16 d; + int pb1=0, pb2=0, pb3=0, p1=0, p2=0, p3=0, p4=0; + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + d.offset = UE_REG_MISC_SW; + d.count = 1; + + do { + ret = ioctl(fp, USRP_E_READ_CTL16, &d); + if (d.buf[0] & PB1) { + pb1 = 1; + printf("Pushbutton 1 hit\n"); + } + + if (d.buf[0] & PB2) { + pb2 = 1; + printf("Pushbutton 2 hit\n"); + } + + if (d.buf[0] & PB3) { + pb3 = 1; + printf("Pushbutton 3 hit\n"); + } + + sleep(1); + + } while (!(pb1 && pb2 && pb3)); + + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-ctl.c b/host/apps/omap_debug/usrp-e-ctl.c new file mode 100644 index 000000000..69c48ee6f --- /dev/null +++ b/host/apps/omap_debug/usrp-e-ctl.c @@ -0,0 +1,48 @@ +#include <stdio.h> +#include <stdlib.h> +#include <sys/types.h> +#include <fcntl.h> +#include <sys/ioctl.h> + +#include "usrp_e.h" + +// Usage: usrp_e_ctl w|r offset number_of_values val1 val2 .... + +int main(int argc, char *argv[]) +{ + int fp, i, cnt, ret; + struct usrp_e_ctl16 ctl_data; + + if (argc < 4) { + printf("Usage: usrp_e_ctl w|r offset number_of_values val1 val2 ....\n"); + exit(-1); + } + + cnt = atoi(argv[3]); + + ctl_data.offset = atoi(argv[2]); + ctl_data.count = cnt; + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + if (*argv[1] == 'w') { + for (i=0; i<cnt; i++) + ctl_data.buf[i] = atoi(argv[4+i]); + + ret = ioctl(fp, USRP_E_WRITE_CTL16, &ctl_data); + printf("Return value from write ioctl = %d\n", ret); + } + + if (*argv[1] == 'r') { + ret = ioctl(fp, USRP_E_READ_CTL16, &ctl_data); + printf("Return value from write ioctl = %d\n", ret); + + for (i=0; i<ctl_data.count; i++) { + if (!(i%8)) + printf("\nData at %4d :", i); + printf(" %5d", ctl_data.buf[i]); + } + printf("\n"); + } +} diff --git a/host/apps/omap_debug/usrp-e-debug-pins.c b/host/apps/omap_debug/usrp-e-debug-pins.c new file mode 100644 index 000000000..d18bbf990 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-debug-pins.c @@ -0,0 +1,77 @@ +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/types.h> +#include <fcntl.h> +#include <string.h> +#include <sys/ioctl.h> + +#include "usrp_e.h" +#include "usrp_e_regs.hpp" + +// Usage: usrp_e_gpio <string> + +static int fp; + +static int read_reg(__u16 reg) +{ + int ret; + struct usrp_e_ctl16 d; + + d.offset = reg; + d.count = 1; + ret = ioctl(fp, USRP_E_READ_CTL16, &d); + return d.buf[0]; +} + +static void write_reg(__u16 reg, __u16 val) +{ + int ret; + struct usrp_e_ctl16 d; + + d.offset = reg; + d.count = 1; + d.buf[0] = val; + ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); +} + +int main(int argc, char *argv[]) +{ + int test; + + test = 0; + if (argc < 2) { + printf("%s 0|1|off\n", argv[0]); + } + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + if (fp < 0) { + perror("Open failed"); + return -1; + } + + if (strcmp(argv[1], "0") == 0) { + printf("Selected 0 based on %s\n", argv[1]); + write_reg(UE_REG_GPIO_TX_DDR, 0xFFFF); + write_reg(UE_REG_GPIO_RX_DDR, 0xFFFF); + write_reg(UE_REG_GPIO_TX_SEL, 0x0); + write_reg(UE_REG_GPIO_RX_SEL, 0x0); + write_reg(UE_REG_GPIO_TX_DBG, 0xFFFF); + write_reg(UE_REG_GPIO_RX_DBG, 0xFFFF); + } else if (strcmp(argv[1], "1") == 0) { + printf("Selected 1 based on %s\n", argv[1]); + write_reg(UE_REG_GPIO_TX_DDR, 0xFFFF); + write_reg(UE_REG_GPIO_RX_DDR, 0xFFFF); + write_reg(UE_REG_GPIO_TX_SEL, 0xFFFF); + write_reg(UE_REG_GPIO_RX_SEL, 0xFFFF); + write_reg(UE_REG_GPIO_TX_DBG, 0xFFFF); + write_reg(UE_REG_GPIO_RX_DBG, 0xFFFF); + } else { + printf("Selected off based on %s\n", argv[1]); + write_reg(UE_REG_GPIO_TX_DDR, 0x0); + write_reg(UE_REG_GPIO_RX_DDR, 0x0); + } + + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-gpio.c b/host/apps/omap_debug/usrp-e-gpio.c new file mode 100644 index 000000000..adef877d3 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-gpio.c @@ -0,0 +1,83 @@ +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/types.h> +#include <fcntl.h> +#include <string.h> +#include <sys/ioctl.h> + +#include "usrp_e.h" +#include "usrp_e_regs.hpp" + +// Usage: usrp_e_gpio <string> + +static int fp; + +static int read_reg(__u16 reg) +{ + int ret; + struct usrp_e_ctl16 d; + + d.offset = reg; + d.count = 1; + ret = ioctl(fp, USRP_E_READ_CTL16, &d); + return d.buf[0]; +} + +static void write_reg(__u16 reg, __u16 val) +{ + int ret; + struct usrp_e_ctl16 d; + + d.offset = reg; + d.count = 1; + d.buf[0] = val; + ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); +} + +int main(int argc, char *argv[]) +{ + int i, test, data_in; + + test = 0; + if (argc > 1) + test = 1; + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + write_reg(UE_REG_GPIO_TX_DDR, 0x0); + write_reg(UE_REG_GPIO_RX_DDR, 0xFFFF); + + for (i=0; i < 16; i++) { + write_reg(UE_REG_GPIO_RX_IO, 1 << i); + sleep(1); + if (test) { + data_in = read_reg(UE_REG_GPIO_TX_IO); + if (data_in != (1 << i)) + printf("Read failed, wrote: %X read: %X\n", \ + 1 << i, data_in); + } + } + + write_reg(UE_REG_GPIO_RX_DDR, 0x0); + write_reg(UE_REG_GPIO_TX_DDR, 0xFFFF); + + sleep(1); + + for (i=0; i < 16; i++) { + write_reg(UE_REG_GPIO_TX_IO, 1 << i); + sleep(1); + if (test) { + data_in = read_reg(UE_REG_GPIO_RX_IO); + if (data_in != (1 << i)) + printf("Read failed, wrote: %X read: %X\n", \ + 1 << i, data_in); + } + } + + write_reg(UE_REG_GPIO_RX_DDR, 0x0); + write_reg(UE_REG_GPIO_TX_DDR, 0x0); + + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-i2c.c b/host/apps/omap_debug/usrp-e-i2c.c new file mode 100644 index 000000000..da8709ae1 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-i2c.c @@ -0,0 +1,87 @@ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <sys/types.h> +#include <fcntl.h> +#include <sys/ioctl.h> + +#include "usrp_e.h" + +// Usage: usrp_e_i2c w address data0 data1 data 2 .... +// Usage: usrp_e_i2c r address count + +int main(int argc, char *argv[]) +{ + int fp, ret, i, tmp; + struct usrp_e_i2c *i2c_msg; + int direction, address, count; + + if (argc < 3) { + printf("Usage: usrp-e-i2c w address data0 data1 data2 ...\n"); + printf("Usage: usrp-e-i2c r address count\n"); + printf("All addresses and data in hex.\n"); + exit(-1); + } + + if (strcmp(argv[1], "r") == 0) { + direction = 0; + } else if (strcmp(argv[1], "w") == 0) { + direction = 1; + } else { + return -1; + } + + sscanf(argv[2], "%X", &address); + printf("Address = %X\n", address); + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + if (fp < 0) { + perror("Open failed"); + return -1; + } + +// sleep(1); + + if (direction) { + count = argc - 3; + } else { + sscanf(argv[3], "%X", &count); + } + printf("Count = %X\n", count); + + i2c_msg = malloc(sizeof(i2c_msg) + count * sizeof(char)); + + i2c_msg->addr = address; + i2c_msg->len = count; + + for (i = 0; i < count; i++) { + i2c_msg->data[i] = i; + } + + if (direction) { + // Write + + for (i=0; i<count; i++) { + sscanf(argv[3+i], "%X", &tmp); + i2c_msg->data[i] = tmp; + } + + ret = ioctl(fp, USRP_E_I2C_WRITE, i2c_msg); + printf("Return value from i2c_write ioctl: %d\n", ret); + } else { + // Read + + ret = ioctl(fp, USRP_E_I2C_READ, i2c_msg); + printf("Return value from i2c_read ioctl: %d\n", ret); + + printf("Ioctl: %d Data read :", ret); + for (i=0; i<count; i++) { + printf(" %X", i2c_msg->data[i]); + } + printf("\n"); + + } + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-lb-test.c b/host/apps/omap_debug/usrp-e-lb-test.c new file mode 100644 index 000000000..68848064e --- /dev/null +++ b/host/apps/omap_debug/usrp-e-lb-test.c @@ -0,0 +1,58 @@ +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> +#include <pthread.h> +#include <stdlib.h> +#include <unistd.h> +#include <stddef.h> +#include "usrp_e.h" + +// max length #define PKT_DATA_LENGTH 1016 + +int main(int argc, char *argv[]) +{ + struct usrp_transfer_frame *tx_data, *rx_data; + int i, fp, packet_data_length, cnt; + struct usrp_e_ctl16 d; + + if (argc < 2) { + printf("%s data_size (in bytes < 2040)\n", argv[0]); + return -1; + } + + packet_data_length = atoi(argv[1]); + + fp = open("/dev/usrp_e0", O_RDWR); + + d.offset = 14; + d.count = 1; + d.buf[0] = (1 << 13); + ioctl(fp, USRP_E_WRITE_CTL16, &d); + + tx_data = malloc(2048); + rx_data = malloc(2048); + + tx_data->status = 0; + tx_data->len = sizeof(struct usrp_transfer_frame) + packet_data_length; + + while (1) { + + for (i = 0; i < packet_data_length; i++) { + tx_data->buf[i] = random() >> 24; + + } + + cnt = write(fp, tx_data, 2048); + cnt = read(fp, rx_data, 2048); + + if (tx_data->len != rx_data->len) + printf("Bad frame length sent %d, read %d\n", tx_data->len, rx_data->len); + + for (i = 0; i < packet_data_length; i++) { + if (tx_data->buf[i] != rx_data->buf[i]) + printf("Bad data at %d, sent %d, received %d\n", i, tx_data->buf[i], rx_data->buf[i]); + } + printf("---------------------------------------------------\n"); + sleep(1); + } +} diff --git a/host/apps/omap_debug/usrp-e-led.c b/host/apps/omap_debug/usrp-e-led.c new file mode 100644 index 000000000..d1b6c8996 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-led.c @@ -0,0 +1,35 @@ +#include <stdio.h> +#include <stdlib.h> +#include <sys/types.h> +#include <fcntl.h> +#include <string.h> +#include <sys/ioctl.h> +#include <unistd.h> + +#include "usrp_e.h" +#include "usrp_e_regs.hpp" + +// Usage: usrp_e_uart <string> + + +int main(int argc, char *argv[]) +{ + int fp, i, ret; + struct usrp_e_ctl16 d; + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + d.offset = UE_REG_MISC_BASE; + d.count = 1; + + while (1) { + for (i=0; i<8; i++) { + d.buf[0] = i; + ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); + sleep(1); + } + } + + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-ram.c b/host/apps/omap_debug/usrp-e-ram.c new file mode 100644 index 000000000..d548f7ccd --- /dev/null +++ b/host/apps/omap_debug/usrp-e-ram.c @@ -0,0 +1,25 @@ +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> + +int main(int rgc, char *argv[]) +{ + int fp, i, cnt; + unsigned short buf[1024]; + unsigned short buf_rb[1024]; + + fp = open("/dev/usrp1_e0", O_RDWR); + printf("fp = %d\n", fp); + + for (i=0; i<1024; i++) + buf[i] = i*256; + write(fp, buf, 2048); + read(fp, buf_rb, 2048); + + printf("Read back %hX %hX\n", buf_rb[0], buf_rb[1]); + + for (i=0; i<1024; i++) { + if (buf[i] != buf_rb[i]) + printf("Read - %hX, expected - %hX\n", buf_rb[i], buf[i]); + } +} diff --git a/host/apps/omap_debug/usrp-e-read.c b/host/apps/omap_debug/usrp-e-read.c new file mode 100644 index 000000000..c28f018d5 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-read.c @@ -0,0 +1,18 @@ +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> + +int main(int rgc, char *argv[]) +{ + int fp, cnt; + short buf[1024]; + + fp = open("/dev/usrp1_e0", O_RDONLY); + printf("fp = %d\n", fp); + + do { + cnt = read(fp, buf, 2048); +// printf("Bytes read - %d\n", cnt); + } while(1); + printf("Data - %hX\n", buf[0]); +} diff --git a/host/apps/omap_debug/usrp-e-spi.c b/host/apps/omap_debug/usrp-e-spi.c new file mode 100644 index 000000000..c353c409b --- /dev/null +++ b/host/apps/omap_debug/usrp-e-spi.c @@ -0,0 +1,54 @@ +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/types.h> +#include <fcntl.h> +#include <sys/ioctl.h> + +#include "usrp_e.h" + +// Usage: usrp_e_spi w|rb slave data + +int main(int argc, char *argv[]) +{ + int fp, slave, length, ret; + unsigned int data; + struct usrp_e_spi spi_dat; + + if (argc < 5) { + printf("Usage: usrp_e_spi w|rb slave transfer_length data\n"); + exit(-1); + } + + slave = atoi(argv[2]); + length = atoi(argv[3]); + data = atoll(argv[4]); + + printf("Data = %X\n", data); + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + if (fp < 0) { + perror("Open failed"); + return -1; + } + +// sleep(1); + + + spi_dat.slave = slave; + spi_dat.data = data; + spi_dat.length = length; + spi_dat.flags = UE_SPI_PUSH_FALL | UE_SPI_LATCH_RISE; + + if (*argv[1] == 'r') { + spi_dat.readback = 1; + ret = ioctl(fp, USRP_E_SPI, &spi_dat); + printf("Ioctl returns: %d, Data returned = %d\n", ret, spi_dat.data); + } else { + spi_dat.readback = 0; + ioctl(fp, USRP_E_SPI, &spi_dat); + } + + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-uart-rx.c b/host/apps/omap_debug/usrp-e-uart-rx.c new file mode 100644 index 000000000..24b417980 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-uart-rx.c @@ -0,0 +1,53 @@ +#include <stdio.h> +#include <stdlib.h> +#include <sys/types.h> +#include <fcntl.h> +#include <string.h> +#include <sys/ioctl.h> + +#include "usrp_e.h" +#include "usrp_e_regs.hpp" + +// Usage: usrp_e_uart <string> + + +int main(int argc, char *argv[]) +{ + int fp, ret; + struct usrp_e_ctl16 d; + __u16 clkdiv; + + if (argc == 0) { + printf("Usage: usrp-e-uart-rx <opt clkdiv>\n"); + printf("clkdiv = 278 is 230.4k \n"); + printf("clkdiv = 556 is 115.2k \n"); + exit(-1); + } + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + if (argc == 2) { + clkdiv = atoi(argv[1]); + d.offset = UE_REG_UART_CLKDIV; + d.count = 1; + d.buf[0] = clkdiv; + ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); + } + + while(1) { + d.offset = UE_REG_UART_RXLEVEL; + d.count = 1; + ret = ioctl(fp, USRP_E_READ_CTL16, &d); + + if (d.buf[0] > 0) { + d.offset = UE_REG_UART_RXCHAR; + d.count = 1; + ret = ioctl(fp, USRP_E_READ_CTL16, &d); + printf("%c", d.buf[0]); + fflush(stdout); + } + } + + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-uart.c b/host/apps/omap_debug/usrp-e-uart.c new file mode 100644 index 000000000..2956c407f --- /dev/null +++ b/host/apps/omap_debug/usrp-e-uart.c @@ -0,0 +1,48 @@ +#include <stdio.h> +#include <stdlib.h> +#include <sys/types.h> +#include <fcntl.h> +#include <string.h> +#include <sys/ioctl.h> + +#include "usrp_e.h" +#include "usrp_e_regs.hpp" + +// Usage: usrp_e_uart <string> + + +int main(int argc, char *argv[]) +{ + int fp, i, ret; + struct usrp_e_ctl16 d; + char *str = argv[1]; + __u16 clkdiv; + + if (argc < 2) { + printf("Usage: usrp_e_uart <string> <opt clkdiv>\n"); + printf("clkdiv = 278 is 230.4k \n"); + printf("clkdiv = 556 is 115.2k \n"); + exit(-1); + } + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + if (argc == 3) { + clkdiv = atoi(argv[2]); + d.offset = UE_REG_UART_CLKDIV; + d.count = 1; + d.buf[0] = clkdiv; + ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); + } + + for (i=0; i<strlen(str); i++) { + d.offset = UE_REG_UART_TXCHAR; + d.count = 1; + d.buf[0] = str[i]; + ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); + printf("Wrote %X, to %X, ret = %d\n", d.buf[0], d.offset, ret); + } + + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-write.c b/host/apps/omap_debug/usrp-e-write.c new file mode 100644 index 000000000..903c0071f --- /dev/null +++ b/host/apps/omap_debug/usrp-e-write.c @@ -0,0 +1,21 @@ +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> + +int main(int rgc, char *argv[]) +{ + int fp, i, cnt; + short buf[1024]; + + fp = open("/dev/usrp1_e0", O_WRONLY); + printf("fp = %d\n", fp); + + for (i=0; i<1024; i++) { + buf[i] = i; + } + +// do { + cnt = write(fp, buf, 2048); + printf("Bytes written - %d\n", cnt); +// } while (1); +} diff --git a/host/apps/omap_debug/usrp_e.h b/host/apps/omap_debug/usrp_e.h new file mode 100644 index 000000000..4c6a5dd89 --- /dev/null +++ b/host/apps/omap_debug/usrp_e.h @@ -0,0 +1,91 @@ + +/* + * Copyright (C) 2010 Ettus Research, LLC + * + * Written by Philip Balister <philip@opensdr.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __USRP_E_H +#define __USRP_E_H + +#include <linux/types.h> +#include <linux/ioctl.h> + +struct usrp_e_ctl16 { + __u32 offset; + __u32 count; + __u16 buf[20]; +}; + +struct usrp_e_ctl32 { + __u32 offset; + __u32 count; + __u32 buf[10]; +}; + +/* SPI interface */ + +#define UE_SPI_TXONLY 0 +#define UE_SPI_TXRX 1 + +/* Defines for spi ctrl register */ +#define UE_SPI_CTRL_TXNEG (1<<10) +#define UE_SPI_CTRL_RXNEG (1<<9) + +#define UE_SPI_PUSH_RISE 0 +#define UE_SPI_PUSH_FALL UE_SPI_CTRL_TXNEG +#define UE_SPI_LATCH_RISE 0 +#define UE_SPI_LATCH_FALL UE_SPI_CTRL_RXNEG + +struct usrp_e_spi { + __u8 readback; + __u32 slave; + __u32 data; + __u32 length; + __u32 flags; +}; + +struct usrp_e_i2c { + __u8 addr; + __u32 len; + __u8 data[]; +}; + +#define USRP_E_IOC_MAGIC 'u' +#define USRP_E_WRITE_CTL16 _IOW(USRP_E_IOC_MAGIC, 0x20, struct usrp_e_ctl16) +#define USRP_E_READ_CTL16 _IOWR(USRP_E_IOC_MAGIC, 0x21, struct usrp_e_ctl16) +#define USRP_E_WRITE_CTL32 _IOW(USRP_E_IOC_MAGIC, 0x22, struct usrp_e_ctl32) +#define USRP_E_READ_CTL32 _IOWR(USRP_E_IOC_MAGIC, 0x23, struct usrp_e_ctl32) +#define USRP_E_SPI _IOWR(USRP_E_IOC_MAGIC, 0x24, struct usrp_e_spi) +#define USRP_E_I2C_READ _IOWR(USRP_E_IOC_MAGIC, 0x25, struct usrp_e_i2c) +#define USRP_E_I2C_WRITE _IOW(USRP_E_IOC_MAGIC, 0x26, struct usrp_e_i2c) +#define USRP_E_GET_RB_INFO _IOR(USRP_E_IOC_MAGIC, 0x27, struct usrp_e_ring_buffer_size_t) +#define USRP_E_GET_COMPAT_NUMBER _IO(USRP_E_IOC_MAGIC, 0x28) + +#define USRP_E_COMPAT_NUMBER 1 + +/* Flag defines */ +#define RB_USER (1<<0) +#define RB_KERNEL (1<<1) +#define RB_OVERRUN (1<<2) +#define RB_DMA_ACTIVE (1<<3) +#define RB_USER_PROCESS (1<<4) + +struct ring_buffer_info { + int flags; + int len; +}; + +struct usrp_e_ring_buffer_size_t { + int num_pages_rx_flags; + int num_rx_frames; + int num_pages_tx_flags; + int num_tx_frames; +}; + +#endif diff --git a/host/apps/omap_debug/write-eeprom.sh b/host/apps/omap_debug/write-eeprom.sh new file mode 100755 index 000000000..301b06f07 --- /dev/null +++ b/host/apps/omap_debug/write-eeprom.sh @@ -0,0 +1,92 @@ +#!/bin/bash + +if [ $# -ne 3 ] && [ $# -ne 5 ]; +then + echo "Usage:" + echo "" + echo "writeprom.sh deviceid rev fab_rev [envvar envsetting]" + echo + echo " deviceid - expansion board device number from table:" + echo + echo " Summit 0x01" + echo " Tobi 0x02" + echo " Tobi Duo 0x03" + echo " Palo35 0x04" + echo " Palo43 0x05" + echo " Chestnut43 0x06" + echo " Pinto 0x07" + echo + echo " rev - board revision (e.g. 0x00)" + echo " fab_rev - revision marking from pcb (e.g. R2411)" + echo " envvar - optional u-boot env variable name" + echo " (e.g. dvimode)" + echo " envsetting - optional u-boot env variable setting" + echo " (e.g. 1024x768MR-16@60)" + exit 1 +fi + +fabrevision=$3 +if [ ${#fabrevision} -ge 8 ]; then + echo "Error: fab revision string must less than 8 characters" + exit 1 +fi + +envvar=$4 +if [ ${#envar} -ge 16 ]; then + echo "Error: environment variable name string must less than 16 characters" + exit 1 +fi + +envsetting=$5 +if [ ${#ensetting} -ge 64 ]; then + echo "Error: environment setting string must less than 64 characters" + exit 1 +fi + +bus=3 +device=0x51 +vendorid=0x03 + +i2cset -y $bus $device 0x00 0x00 +i2cset -y $bus $device 0x01 $vendorid +i2cset -y $bus $device 0x02 0x00 +i2cset -y $bus $device 0x03 $1 +i2cset -y $bus $device 0x04 $2 +i2cset -y $bus $device 0x05 00 + +let i=6 +hexdumpargs="'${#fabrevision}/1 \"0x%02x \"'" +command="echo -n \"$fabrevision\" | hexdump -e $hexdumpargs" +hex=$(eval $command) +for character in $hex; do + i2cset -y $bus $device $i $character + let i=$i+1 +done +i2cset -y $bus $device $i 0x00 + +if [ $# -eq 5 ] +then + i2cset -y $bus $device 0x05 0x01 + + let i=14 + hexdumpargs="'${#envvar}/1 \"0x%02x \"'" + command="echo -n \"$envvar\" | hexdump -e $hexdumpargs" + hex=$(eval $command) + for character in $hex; do + i2cset -y $bus $device $i $character + let i=$i+1 + done + i2cset -y $bus $device $i 0x00 + + let i=30 + hexdumpargs="'${#envsetting}/1 \"0x%02x \"'" + command="echo -n \"$envsetting\" | hexdump -e $hexdumpargs" + hex=$(eval $command) + for character in $hex; do + i2cset -y $bus $device $i $character + let i=$i+1 + done + i2cset -y $bus $device $i 0x00 +fi + + diff --git a/host/apps/omap_debug/write_board_id.sh b/host/apps/omap_debug/write_board_id.sh new file mode 100755 index 000000000..067269c64 --- /dev/null +++ b/host/apps/omap_debug/write_board_id.sh @@ -0,0 +1,10 @@ +#!/bin/sh + +i2cset -y 3 0x51 0x00 0x00 +i2cset -y 3 0x51 0x01 0x03 +i2cset -y 3 0x51 0x02 0x00 +i2cset -y 3 0x51 0x03 0x01 +i2cset -y 3 0x51 0x04 0x00 +i2cset -y 3 0x51 0x05 0x00 + + diff --git a/host/cmake_uninstall.cmake.in b/host/cmake_uninstall.cmake.in new file mode 100644 index 000000000..6031a6ca9 --- /dev/null +++ b/host/cmake_uninstall.cmake.in @@ -0,0 +1,23 @@ +# http://www.vtk.org/Wiki/CMake_FAQ#Can_I_do_.22make_uninstall.22_with_CMake.3F + +IF(NOT EXISTS "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt") + MESSAGE(FATAL_ERROR "Cannot find install manifest: \"@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt\"") +ENDIF(NOT EXISTS "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt") + +FILE(READ "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt" files) +STRING(REGEX REPLACE "\n" ";" files "${files}") +FOREACH(file ${files}) + MESSAGE(STATUS "Uninstalling \"$ENV{DESTDIR}${file}\"") + IF(EXISTS "$ENV{DESTDIR}${file}") + EXEC_PROGRAM( + "@CMAKE_COMMAND@" ARGS "-E remove \"$ENV{DESTDIR}${file}\"" + OUTPUT_VARIABLE rm_out + RETURN_VALUE rm_retval + ) + IF(NOT "${rm_retval}" STREQUAL 0) + MESSAGE(FATAL_ERROR "Problem when removing \"$ENV{DESTDIR}${file}\"") + ENDIF(NOT "${rm_retval}" STREQUAL 0) + ELSE(EXISTS "$ENV{DESTDIR}${file}") + MESSAGE(STATUS "File \"$ENV{DESTDIR}${file}\" does not exist.") + ENDIF(EXISTS "$ENV{DESTDIR}${file}") +ENDFOREACH(file) diff --git a/host/docs/CMakeLists.txt b/host/docs/CMakeLists.txt new file mode 100644 index 000000000..c04262b63 --- /dev/null +++ b/host/docs/CMakeLists.txt @@ -0,0 +1,103 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# List of manual sources +######################################################################## +SET(manual_sources + index.rst + identification.rst + build.rst + coding.rst + dboards.rst + general.rst + images.rst + transport.rst + usrp1.rst + usrp2.rst + usrp_e1xx.rst +) + +######################################################################## +# Setup Manual +######################################################################## +MESSAGE(STATUS "") +FIND_PACKAGE(Docutils) + +LIBUHD_REGISTER_COMPONENT("Manual" ENABLE_MANUAL ON "DOCUTILS_FOUND" OFF) + +IF(ENABLE_MANUAL) + #setup rst2html options + SET(stylesheet ${CMAKE_CURRENT_SOURCE_DIR}/style.css) + SET(rst2html_options + --stylesheet=${stylesheet} + --no-toc-backlinks --date --time + ) + + #create generation rule for each source + FOREACH(rstfile ${manual_sources}) + #set input and output file names + SET(rstfile ${CMAKE_CURRENT_SOURCE_DIR}/${rstfile}) + GET_FILENAME_COMPONENT(rstfile_we ${rstfile} NAME_WE) + SET(htmlfile ${CMAKE_CURRENT_BINARY_DIR}/${rstfile_we}.html) + + #make the html file depend on the rst file + ADD_CUSTOM_COMMAND( + OUTPUT ${htmlfile} DEPENDS ${rstfile} ${stylesheet} + COMMAND ${RST2HTML_EXECUTABLE} ${rstfile} ${htmlfile} ${rst2html_options} + COMMENT "Generating ${htmlfile}" + ) + + #make the manual target depend on the html file + LIST(APPEND manual_html_files ${htmlfile}) + INSTALL(FILES ${htmlfile} DESTINATION ${PKG_DOC_DIR}/manual/html) + ENDFOREACH(rstfile ${manual_sources}) + + #make the html manual a build-time dependency + ADD_CUSTOM_TARGET(manual_html ALL DEPENDS ${manual_html_files}) +ENDIF(ENABLE_MANUAL) + +INSTALL(FILES ${manual_sources} DESTINATION ${PKG_DOC_DIR}/manual/rst) + +######################################################################## +# Setup Doxygen +######################################################################## +MESSAGE(STATUS "") +FIND_PACKAGE(Doxygen) + +LIBUHD_REGISTER_COMPONENT("Doxygen" ENABLE_DOXYGEN ON "DOXYGEN_FOUND" OFF) + +IF(ENABLE_DOXYGEN) + #generate the doxygen configuration file + SET(CMAKE_CURRENT_BINARY_DIR_DOXYGEN ${CMAKE_CURRENT_BINARY_DIR}/doxygen) + CONFIGURE_FILE( + ${CMAKE_CURRENT_SOURCE_DIR}/Doxyfile.in + ${CMAKE_CURRENT_BINARY_DIR}/Doxyfile + @ONLY) + + #make doxygen directory depend on the header files + FILE(GLOB_RECURSE header_files ${CMAKE_SOURCE_DIR}/include/*.hpp) + ADD_CUSTOM_COMMAND( + OUTPUT ${CMAKE_CURRENT_BINARY_DIR_DOXYGEN} DEPENDS ${header_files} + COMMAND ${DOXYGEN_EXECUTABLE} ${CMAKE_CURRENT_BINARY_DIR}/Doxyfile + COMMENT "Generating documentation with doxygen" + ) + + #make the doxygen generation a built-time dependency + ADD_CUSTOM_TARGET(doxygen_docs ALL DEPENDS ${CMAKE_CURRENT_BINARY_DIR_DOXYGEN}) + INSTALL(DIRECTORY ${CMAKE_CURRENT_BINARY_DIR_DOXYGEN} DESTINATION ${PKG_DOC_DIR}) +ENDIF(ENABLE_DOXYGEN) diff --git a/host/docs/Doxyfile.in b/host/docs/Doxyfile.in new file mode 100644 index 000000000..7395516b5 --- /dev/null +++ b/host/docs/Doxyfile.in @@ -0,0 +1,1514 @@ +# Doxyfile 1.6.1 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = @CPACK_PACKAGE_NAME@ + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = @CPACK_PACKAGE_VERSION@ + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = @CMAKE_CURRENT_BINARY_DIR_DOXYGEN@ + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, +# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English +# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, +# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, +# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = YES + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = @CMAKE_SOURCE_DIR@ + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit \brief command for a brief description.) + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 8 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it parses. +# With this tag you can assign which parser to use for a given extension. +# Doxygen has a built-in mapping, but you can override or extend it using this tag. +# The format is ext=language, where ext is a file extension, and language is one of +# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP, +# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran), +# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = YES + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen to replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = NO + +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penality. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will rougly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols + +SYMBOL_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespace are hidden. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + +SHOW_DIRECTORIES = NO + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. +# This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command <command> <input-file>, where <command> is the value of +# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by +# doxygen. The layout file controls the global structure of the generated output files +# in an output format independent way. The create the layout file that represents +# doxygen's defaults, run doxygen with the -l option. You can optionally specify a +# file name after the option, if omitted DoxygenLayout.xml will be used as the name +# of the layout file. + +LAYOUT_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be abled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = @CMAKE_SOURCE_DIR@/include + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx +# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 + +FILE_PATTERNS = *.hpp + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix filesystem feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command <filter> <input-file>, where <filter> +# is the value of the INPUT_FILTER tag, and <input-file> is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. +# If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. +# Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. +# The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# is applied to all files. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. +# Otherwise they will link to the documentation. + +REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = NO + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. For this to work a browser that supports +# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox +# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). + +HTML_DYNAMIC_SECTIONS = NO + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER +# are set, an additional index file will be generated that can be used as input for +# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated +# HTML documentation. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. +# The path specified is relative to the HTML output folder. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#namespace + +QHP_NAMESPACE = + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#virtual-folders + +QHP_VIRTUAL_FOLDER = doc + +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add. +# For more information please see +# http://doc.trolltech.com/qthelpproject.html#custom-filters + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see +# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's +# filter section matches. +# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>. + +QHP_SECT_FILTER_ATTRS = + +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated +# .qhp file. + +QHG_LOCATION = + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# This tag can be used to set the number of enum values (range [1..20]) +# that doxygen will group on one line in the generated HTML documentation. + +ENUM_VALUES_PER_LINE = 4 + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to YES, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). +# Windows users are probably better off using the HTML help feature. + +GENERATE_TREEVIEW = NO + +# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, +# and Class Hierarchy pages using a tree view instead of an ordered list. + +USE_INLINE_TREES = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 + +# When the SEARCHENGINE tag is enable doxygen will generate a search box for the HTML output. The underlying search engine uses javascript +# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP) or Qt help (GENERATE_QHP) +# there is already a search function so this one should typically +# be disabled. + +SEARCHENGINE = YES + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER. + +LATEX_SOURCE_CODE = NO + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. +# This is useful +# if you want to understand what is going on. +# On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = YES + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse +# the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option is superseded by the HAVE_DOT option below. This is only a +# fallback. It is recommended to install and use dot, since it yields more +# powerful graphs. + +CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# By default doxygen will write a font called FreeSans.ttf to the output +# directory and reference it in all dot files that doxygen generates. This +# font does not include all possible unicode characters however, so when you need +# these (or just want a differently looking font) you can specify the font name +# using DOT_FONTNAME. You need need to make sure dot is able to find the font, +# which can be done by putting it in a standard location or by setting the +# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory +# containing the font. + +DOT_FONTNAME = FreeSans + +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The default size is 10pt. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the output directory to look for the +# FreeSans.ttf font (which doxygen will put there itself). If you specify a +# different font using DOT_FONTNAME you can set the path where dot +# can find it using this tag. + +DOT_FONTPATH = + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are png, jpg, or gif +# If left blank png will be used. + +DOT_IMAGE_FORMAT = png + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of +# a graph (i.e. they become hard to read). + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = YES + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES diff --git a/host/docs/build.rst b/host/docs/build.rst new file mode 100644 index 000000000..de7c544f2 --- /dev/null +++ b/host/docs/build.rst @@ -0,0 +1,205 @@ +======================================================================== +UHD - Build Guide +======================================================================== + +.. contents:: Table of Contents + +------------------------------------------------------------------------ +Build Dependencies +------------------------------------------------------------------------ + +**Linux Notes:** +The dependencies can be acquired through the package manager. + +**Mac OS X Notes:** +Install the "Xcode Developer Tools" to get the build tools (gcc and make). +Use MacPorts to get the Boost and Cheetah dependencies. +Other dependencies can be downloaded as dmg installers from the web. + +**Windows Notes:** +The dependencies can be acquired through installable exe files. +Usually, the windows installer can be found on the project's website. +Some projects do not host windows installers, and if this is the case, +follow the auxiliary download url for the windows installer (below). + +^^^^^^^^^^^^^^^^ +Git +^^^^^^^^^^^^^^^^ +Required to check out the repository. +On windows, install cygwin with git support to checkout the repository, +or install msysgit from http://code.google.com/p/msysgit/downloads/list + +^^^^^^^^^^^^^^^^ +C++ compiler +^^^^^^^^^^^^^^^^ +The following compilers are known to work: + +* GCC +* Clang +* MSVC + +^^^^^^^^^^^^^^^^ +CMake +^^^^^^^^^^^^^^^^ +* **Purpose:** generates project build files +* **Version:** at least 2.6 +* **Usage:** build time (required) +* **Download URL:** http://www.cmake.org/cmake/resources/software.html + +^^^^^^^^^^^^^^^^ +Boost +^^^^^^^^^^^^^^^^ +* **Purpose:** C++ library +* **Version:** at least 1.36 unix, at least 1.40 windows +* **Usage:** build time + run time (required) +* **Download URL:** http://www.boost.org/users/download/ +* **Download URL (windows installer):** http://www.boostpro.com/download + +^^^^^^^^^^^^^^^^ +LibUSB +^^^^^^^^^^^^^^^^ +* **Purpose:** USB-based hardware support +* **Version:** at least 1.0 +* **Usage:** build time + run time (optional) +* **Download URL:** http://sourceforge.net/projects/libusb/files/libusb-1.0/ +* **Download URL (windows binaries):** http://www.libusb.org/wiki/windows_backend#LatestBinarySnapshots + +^^^^^^^^^^^^^^^^ +Python +^^^^^^^^^^^^^^^^ +* **Purpose:** used by Cheetah and utility scripts +* **Version:** at least 2.6 +* **Usage:** build time + run time utility scripts (required) +* **Download URL:** http://www.python.org/download/ + +^^^^^^^^^^^^^^^^ +Cheetah +^^^^^^^^^^^^^^^^ +* **Purpose:** source code generation +* **Version:** at least 2.0 +* **Usage:** build time (required) +* **Download URL:** http://www.cheetahtemplate.org/download.html +* **Download URL (windows installer):** http://feisley.com/python/cheetah/ + +**Alternative method:** +Install setuptools, and use the easy_install command to install Cheetah. +http://pypi.python.org/pypi/setuptools + +^^^^^^^^^^^^^^^^ +Doxygen +^^^^^^^^^^^^^^^^ +* **Purpose:** generates html api documentation +* **Usage:** build time (optional) +* **Download URL:** http://www.stack.nl/~dimitri/doxygen/download.html#latestsrc + +^^^^^^^^^^^^^^^^ +Docutils +^^^^^^^^^^^^^^^^ +* **Purpose:** generates html user manual +* **Usage:** build time (optional) +* **Download URL:** http://docutils.sourceforge.net/ + +------------------------------------------------------------------------ +Build Instructions (Unix) +------------------------------------------------------------------------ + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Generate Makefiles with cmake +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +:: + + cd <uhd-repo-path>/host + mkdir build + cd build + cmake ../ + +Additionally, configuration variables can be passed into cmake via the command line. +The following common-use configuration variables are listed below: + +* For a custom install prefix: -DCMAKE_INSTALL_PREFIX=<prefix> +* To install libs into lib64: cmake -DLIB_SUFFIX=64 + +Example usage: +:: + + cmake -DCMAKE_INSTALL_PREFIX=/opt/uhd ../ + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Build and install +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +:: + + make + make test + sudo make install + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Setup the library path (Linux) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Make sure that libuhd.so is in your LD_LIBRARY_PATH +or add it to /etc/ld.so.conf and make sure to run sudo ldconfig + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Setup the library path (Mac OS X) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Make sure that libuhd.dylib is in your DYLD_LIBRARY_PATH + +------------------------------------------------------------------------ +Build Instructions (Windows) +------------------------------------------------------------------------ + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Generate the project with cmake +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +* Open the cmake gui program. +* Set the path to the source code: <uhd-repo-path>/host +* Set the path to the build directory: <uhd-repo-path>/host/build +* Make sure that the paths do not contain spaces. +* Click configure and select the MSVC compiler. +* Set the build variables and click configure again. +* Click generate and a project file will be created in the build directory. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +LibUSB cmake notes +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +On Windows, cmake does not have the advantage of pkg-config, +so we must manually tell cmake how to locate the LibUSB header and lib. + +From the cmake gui, select "Advanded View": + +* Set LIBUSB_INCLUDE_DIR to the directory with "libusb.h". +* Set LIBUSB_LIBRARIES to the full path for "libusb-1.0.lib". + +Then check the boxes to enable USRP1 support, click configure and generate. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Build the project in MSVC +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +* Open the generated project file in MSVC. +* Change the build type from "Debug" to "Release". +* Select the build all target, right click, and choose build. +* Select the install target, right click, and choose build. + +**Note:** you may not have permission to build the install target. +You need to be an administrator or to run MSVC as administrator. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Build the project in MSVC (command line) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Open the Visual Studio Command Prompt Shorcut: +:: + + cd <uhd-repo-path>\host\build + DevEnv uhd.sln /build Release /project ALL_BUILD + DevEnv uhd.sln /build Release /project INSTALL + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Setup the PATH environment variable +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +* Add the boost library path to %PATH% (usually c:\\program files\\boost\\<version>\\lib) +* Add the uhd library path to %PATH% (usually c:\\program files\\uhd\\lib) +* Add the libusb library to %PATH% (if using usb support) + +**Note:** +The interface for editing environment variable paths in Windows is very poor. +I recommend using "Rapid Environment Editor" (http://www.rapidee.com) over the default editor. diff --git a/host/docs/coding.rst b/host/docs/coding.rst new file mode 100644 index 000000000..d5304c1c5 --- /dev/null +++ b/host/docs/coding.rst @@ -0,0 +1,30 @@ +======================================================================== +UHD - Coding to the API +======================================================================== + +.. contents:: Table of Contents + +------------------------------------------------------------------------ +Various API interfaces +------------------------------------------------------------------------ +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Low-Level: The device API +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +A device is an abstraction for hardware that is connected to the host system. +For a USRP, this means that the motherboard and everything on it would be considered to be a "device". +The device API provides ways to: + +* Discover devices that are physical connected to the host system. +* Create a device object for a particular physical device identified by address. +* Register a device driver into the discovery and factory sub-system. +* Streaming samples with metadata into and out of the device. +* Set and get properties on the device object. + +See the documentation in *device.hpp* for reference. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +High-Level: The multi usrp +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The Multi-USRP class provides a FAT interface to a single USRP with +one or more channels, or multiple USRPs in a homogeneous setup. +See the documentation in *usrp/multi_usrp.hpp* for reference. diff --git a/host/docs/dboards.rst b/host/docs/dboards.rst new file mode 100644 index 000000000..7f205c404 --- /dev/null +++ b/host/docs/dboards.rst @@ -0,0 +1,231 @@ +======================================================================== +UHD - Daughterboard Application Notes +======================================================================== + +.. contents:: Table of Contents + +------------------------------------------------------------------------ +Daughterboard Properties +------------------------------------------------------------------------ + +The following contains interesting notes about each daughterboard. +Eventually, this page will be expanded to list out the full +properties of each board as well. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Basic RX and and LFRX +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The Basic RX and LFRX boards have 4 subdevices: + +* **Subdevice A:** real signal on antenna RXA +* **Subdevice B:** real signal on antenna RXB +* **Subdevice AB:** quadrature subdevice using both antennas (IQ) +* **Subdevice BA:** quadrature subdevice using both antennas (QI) + +The boards have no tunable elements or programmable gains. +Though the magic of aliasing, you can down-convert signals +greater than the Nyquist rate of the ADC. + +BasicRX Bandwidth (Hz): + For Real-Mode (A or B subdevice): 250M + For Complex (AB or BA subdevice): 500M + +LFRX Bandwidth (Hz): + For Real-Mode (A or B subdevice): 33M + For Complex (AB or BA subdevice): 66M + +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Basic TX and and LFTX +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The Basic TX and LFTX boards have 4 subdevices: + +* **Subdevice A:** real signal on antenna TXA +* **Subdevice B:** real signal on antenna TXB +* **Subdevice AB:** quadrature subdevice using both antennas (IQ) +* **Subdevice BA:** quadrature subdevice using both antennas (QI) + +The boards have no tunable elements or programmable gains. +Though the magic of aliasing, you can up-convert signals +greater than the Nyquist rate of the DAC. + +BasicTX Bandwidth (Hz): 250M + For Real-Mode (A or B subdevice): 250M + For Complex (AB or BA subdevice): 500M + +LFTX Bandwidth (Hz): 33M + For Real-Mode (A or B subdevice): 33M + For Complex (AB or BA subdevice): 66M + +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +DBSRX +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The DBSRX board has 1 quadrature subdevice. + +Receive Antennas: **J3** + +The board has no user selectable antenna setting + +Receive Gains: + **GC1**, Range: 0-56dB + **GC2**, Range: 0-24dB + +Bandwidth (Hz): 8M-66M + +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +RFX Series +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Transmit Antennas: **TX/RX** + +Receive Antennas: **TX/RX** or **RX2** + +The user may set the receive antenna to be TX/RX or RX2. +However, when using an RFX board in full-duplex mode, +the receive antenna will always be set to RX2, regardless of the settings. + +Receive Gains: **PGA0**, Range: 0-70dB (except RFX400 range is 0-45dB) + +Bandwidths (Hz): + * **RX**: 40M + * **TX**: 40M + +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +XCVR 2450 +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The XCVR2450 has a non-contiguous tuning range consisting of a +high band (4.9-6.0GHz) and a low band (2.4-2.5GHz). + +Transmit Antennas: **J1** or **J2** + +Receive Antennas: **J1** or **J2** + +The XCVR2450 uses a common LO for both receive and transmit. +Even though the API allows the RX and TX LOs to be individually set, +a change of one LO setting will be reflected in the other LO setting. + +The XCVR2450 does not support full-duplex mode, attempting to operate +in full-duplex will result in transmit-only operation. + +Transmit Gains: + * **VGA**, Range: 0-30dB + * **BB**, Range: 0-5dB + +Receive Gains: + * **LNA**, Range: 0-30.5dB + * **VGA**, Range: 0-62dB + +Bandwidths (Hz): + * **RX**: 15M, 19M, 28M, 36M; (each +-0, 5, or 10%) + * **TX**: 24M, 36M, 48M + +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +WBX Series +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Transmit Antennas: **TX/RX** + +Receive Antennas: **TX/RX** or **RX2** + +The user may set the receive antenna to be TX/RX or RX2. +However, when using an WBX board in full-duplex mode, +the receive antenna will always be set to RX2, regardless of the settings. + +Transmit Gains: **PGA0**, Range: 0-25dB + +Receive Gains: **PGA0**, Range: 0-31.5dB + +Bandwidths (Hz): + * **RX**: 40M + * **TX**: 40M + +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +TVRX +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Receive Antennas: RX + +Receive Gains: + * **RF**, Range: -13.3-50.3dB (frequency-dependent) + * **IF**, Range: -1.5-32.5dB + +Bandwidth: 6MHz + +------------------------------------------------------------------------ +Daughterboard Modifications +------------------------------------------------------------------------ + +Sometimes, daughterboards will require modification +to work on certain frequencies or to work with certain hardware. +Modification usually involves moving/removing a SMT component +and burning a new daughterboard id into the eeprom. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +DBSRX - Mod +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Due to different clocking capabilities, +the DBSRX will require modifications to operate on a non-USRP1 motherboard. +On a USRP1 motherboard, a divided clock is provided from an FPGA pin +because the standard daughterboard clock lines cannot provided a divided clock. +However, on other USRP motherboards, the divided clock is provided +over the standard daughterboard clock lines. + +**Step 1: Move the clock configuration resistor** + +Remove R193 (which is 10 ohms, 0603 size) and put it on R194, which is empty. +This is made somewhat more complicated by the fact that the silkscreen is not clear in that area. +R193 is on the back, immediately below the large beige connector, J2. +R194 is just below, and to the left of R193. +The silkscreen for R193 is ok, but for R194, +it is upside down, and partially cut off. +If you lose R193, you can use anything from 0 to 10 ohms there. + +**Step 2: Burn a new daughterboard id into the EEPROM** + +With the daughterboard plugged-in, run the following commands: +:: + + cd <prefix>/share/uhd/utils + ./usrp_burn_db_eeprom --id=0x000d --unit=RX --args=<args> --slot=<slot> + +* <args> are device address arguments (optional if only one USRP is on your machine) +* <slot> is the name of the daughterboard slot (optional if the USRP has only one slot) + +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +RFX - Mod +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Older RFX boards require modifications to use the motherboard oscillator. +If this is the case, UHD will print a warning about the modification. +Please follow the modification procedures below: + +**Step 1: Disable the daughterboard clocks** + +Move R64 to R84, Move R142 to R153 + +**Step 2: Connect the motherboard blocks** + +Move R35 to R36, Move R117 to R115 +These are all 0-ohm, so if you lose one, just short across the appropriate pads + +**Step 3: Burn the appropriate daughterboard id into the EEPROM** + +With the daughterboard plugged-in, run the following commands: +:: + + cd <prefix>/share/uhd/utils + ./usrp_burn_db_eeprom --id=<rx_id> --unit=RX --args=<args> --slot=<slot> + ./usrp_burn_db_eeprom --id=<tx_id> --unit=TX --args=<args> --slot=<slot> + +* <rx_id> choose the appropriate RX ID for your daughterboard + + * **RFX400:** 0x0024 + * **RFX900:** 0x0025 + * **RFX1800:** 0x0034 + * **RFX1200:** 0x0026 + * **RFX2400:** 0x0027 +* <tx_id> choose the appropriate TX ID for your daughterboard + + * **RFX400:** 0x0028 + * **RFX900:** 0x0029 + * **RFX1800:** 0x0035 + * **RFX1200:** 0x002a + * **RFX2400:** 0x002b +* <args> are device address arguments (optional if only one USRP is on your machine) +* <slot> is the name of the daughterboard slot (optional if the USRP has only one slot) diff --git a/host/docs/general.rst b/host/docs/general.rst new file mode 100644 index 000000000..2894fbf88 --- /dev/null +++ b/host/docs/general.rst @@ -0,0 +1,56 @@ +======================================================================== +UHD - General Application Notes +======================================================================== + +.. contents:: Table of Contents + +------------------------------------------------------------------------ +Misc notes +------------------------------------------------------------------------ + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Thread safety notes +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +For the most part, UHD is thread-safe. +Please observe the following limitations: + +**Fast-path thread requirements:** +It is safe to call send() and recv() simultaneously. However, +it is not safe to call recv() simultaneously from different thread contexts. +The same rule applies for recv(), send(), and recv_async_msg(). +One thread context per fast-path device method at a time. + +**Slow-path thread requirements:** +It is safe to change multiple settings simultaneously. However, +this could leave the settings for a device in an uncertain state. +The is because changing one setting could have an impact on how a call affects other settings. +Example: setting the channel mapping affects how the antennas are set. +It is recommended to use at most one thread context for manipulating device settings. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Thread priority scheduling +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +When the UHD spawns a new thread it may try to boost the thread's scheduling priority. +When setting the priority fails, the UHD prints out an error. +This error is harmless, it simply means that the thread will have a normal scheduling priority. + +**Linux Notes:** + +Non-privileged users need special permission to change the scheduling priority. +Add the following line to */etc/security/limits.conf*: +:: + + @<my_group> - rtprio 99 + +Replace <my_group> with a group to which your user belongs. +Settings will not take effect until the user has logged in and out. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Support for dynamically loadable modules +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +For a module to be loaded at runtime, it must be: + +* found in the UHD_MODULE_PATH environment variable, +* installed into the <prefix>/share/uhd/modules directory, +* or installed into /usr/share/uhd/modules directory (unix only). diff --git a/host/docs/identification.rst b/host/docs/identification.rst new file mode 100644 index 000000000..90484744c --- /dev/null +++ b/host/docs/identification.rst @@ -0,0 +1,125 @@ +======================================================================== +UHD - Device Identification Notes +======================================================================== + +.. contents:: Table of Contents + +------------------------------------------------------------------------ +Identifying USRPs +------------------------------------------------------------------------ +Devices are addressed through key/value string pairs. +These string pairs can be used to narrow down the search for a specific device or group of devices. +Most UHD utility applications and examples have a --args parameter that takes a device address; +where the device address is expressed as a delimited string. +See the documentation in types/device_addr.hpp for reference. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Common device identifiers +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Every device has several ways of identifying it on the host system: + ++------------+------------+--------------------------------------------+ +| Identifier | Key | Notes | ++============+============+============================================+ +| Serial | serial | globally unique identifier | ++------------+------------+--------------------------------------------+ +| Address | addr | unique identifier on a network | ++------------+------------+--------------------------------------------+ +| Name | name | optional user-set identifier | ++------------+------------+--------------------------------------------+ +| Type | type | hardware series identifier | ++------------+------------+--------------------------------------------+ + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Device discovery via command line +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Devices attached to your system can be discovered using the "uhd_find_devices" program. +The find devices program scans your system for supported devices and prints +out an enumerated list of discovered devices and their addresses. +The list of discovered devices can be narrowed down by specifying device address args. + +:: + + uhd_find_devices + +Device address arguments can be supplied to narrow the scope of the search. + +:: + + uhd_find_devices --args="type=usrp1" + + -- OR -- + + uhd_find_devices --args="serial=12345678" + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Device discovery through the API +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The device::find() API call searches for devices and returns a list of discovered devices. + +:: + + uhd::device_addr_t hint; //an empty hint discovers all devices + uhd::device_addrs_t dev_addrs = uhd::device::find(hint); + +The hint argument can be populated to narrow the scope of the search. + +:: + + uhd::device_addr_t hint; + hint["type"] = "usrp1"; + uhd::device_addrs_t dev_addrs = uhd::device::find(hint); + + -- OR -- + + uhd::device_addr_t hint; + hint["serial"] = "12345678"; + uhd::device_addrs_t dev_addrs = uhd::device::find(hint); + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Device properties +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Properties of devices attached to your system can be probed with the "uhd_usrp_probe" program. +The usrp probe program constructs an instance of the device and prints out its properties; +properties such as detected daughter-boards, frequency range, gain ranges, etc... + +**Usage:** +:: + + uhd_usrp_probe --args <device-specific-address-args> + +------------------------------------------------------------------------ +Naming a USRP +------------------------------------------------------------------------ +For convenience purposes, users may assign a custom name to their USRPs. +The USRP can then be identified via name, rather than a difficult to remember serial or address. + +A name has the following properties: + +* is composed of ASCII characters +* is between 0 and 20 characters +* is not required to be unique + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Set a custom name +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Run the following commands: +:: + + cd <prefix>/share/uhd/utils + ./usrp_burn_mb_eeprom --args=<optional device args> --key=name --val=lab1_xcvr + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Discovery via name +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The keyword "name" can be used to narrow the scope of the search. +Example with the find devices utility: +:: + + uhd_find_devices --args="name=lab1_xcvr" + + -- OR -- + + uhd_find_devices --args="type=usrp1, name=lab1_xcvr" diff --git a/host/docs/images.rst b/host/docs/images.rst new file mode 100644 index 000000000..f5be88a65 --- /dev/null +++ b/host/docs/images.rst @@ -0,0 +1,105 @@ +======================================================================== +UHD - Firmware and FPGA Image Application Notes +======================================================================== + +.. contents:: Table of Contents + +------------------------------------------------------------------------ +Images Overview +------------------------------------------------------------------------ +Every USRP device must be loaded with special firmware and FPGA images. +The methods of loading images into the device varies among devices: + +* **USRP1:** The host code will automatically load the firmware and FPGA at runtime. +* **USRP2:** The user must manually write the images onto the USRP2 SD card. +* **USRP-N Series:** The user must manually transfer the images over ethernet. +* **USRP-E Series:** The host code will automatically load the FPGA at runtime. + +------------------------------------------------------------------------ +Pre-built images +------------------------------------------------------------------------ + +Pre-built images are available for download. +See the UHD wiki for the download link. + +The pre-built images come in platform-specific installer packages +and platform-independent archive files: + +* **Linux:** DEB or RPM installer +* **Windows:** not available yet... +* **Macintosh:** not available yet... +* **Platform-independent:** ZIP or TAR.GZ archive + +^^^^^^^^^^^^^^^^^^ +Linux installers +^^^^^^^^^^^^^^^^^^ +The Linux-based installers will install the images into /usr/share/uhd/images. +On a Linux system, the UHD will always search this path for image files. + +Commands to install a linux rpm or deb package: + +:: + + sudo rpm -i <linux-images-installer>.rpm + + -- OR -- + + sudo dpkg -i <linux-images-installer>.deb + +^^^^^^^^^^^^^^^^^^^^^^ +Archive install +^^^^^^^^^^^^^^^^^^^^^^ +When installing images from an archive, there are two options: + +**Option 1:** + +Unpack the archive into the UHD installation prefix. +The UHD will always search <prefix>/share/uhd/images for image files. +Where <prefix> was set by the CMAKE_INSTALL_PREFIX at configure-time. + +**Option 2:** + +Unpack the archive anywhere and set the UHD_IMAGE_PATH environment variable. +The UHD_IMAGE_PATH may contain a list of directories to search for image files. + +------------------------------------------------------------------------ +Building images +------------------------------------------------------------------------ + +The UHD source repository comes with the source code necessary to build +both firmware and FPGA images for all supported devices. +The build commands for a particular image can be found in <uhd-repo-path>/images/Makefile. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Xilinx FPGA builds +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Xilinx ISE 12.x and up is required to build the Xilinx FPGA images. +The build requires that you have a unix-like environment with make. +Make sure that xtclsh from the Xilinx ISE bin directory is in your $PATH. + +See <uhd-repo-path>/fpga/usrp2/top/* + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Microblaze firmware builds +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The Microblaze GCC compiler from the Xilinx EDK is required to build the Microblaze firmware images. +The build requires that you have a unix-like environment with autotools and make. +Make sure that mb-gcc from the Xilinx EDK/microblaze directory is in your $PATH. + +See <uhd-repo-path>/firmware/microblaze + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Altera FPGA builds +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Quartus is required to build the Altera FPGA images. +Pre-built images can also be found in <uhd-repo-path>/fpga/usrp1/rbf + +See <uhd-repo-path>/fpga/usrp1/toplevel/* + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +FX2 firmware builds +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The sdcc compiler is required to build the FX2 firmware images. +The build requires that you have a unix-like environment with autotools and make. + +See <uhd-repo-path>/firmware/fx2 diff --git a/host/docs/index.rst b/host/docs/index.rst new file mode 100644 index 000000000..734300164 --- /dev/null +++ b/host/docs/index.rst @@ -0,0 +1,38 @@ +======================================================================== +UHD - Universal Hardware Driver +======================================================================== + +The UHD is the universal hardware driver for Ettus Research products. +The goal of the UHD is to provide a host driver and api for current and future Ettus Research products. +Users will be able to use the UHD driver standalone/without gnuradio. +Also, a dual license option will be available for those who build against the UHD +but cannot release their software products under the GPL. + +------------------------------------------------------------------------ +Contents +------------------------------------------------------------------------ + +^^^^^^^^^^^^^^^^^^^^^ +Building the UHD +^^^^^^^^^^^^^^^^^^^^^ +* `Build Guide <./build.html>`_ + +^^^^^^^^^^^^^^^^^^^^^ +Application Notes +^^^^^^^^^^^^^^^^^^^^^ +* `General Application Notes <./general.html>`_ +* `Device Identification Notes <./identification.html>`_ +* `Firmware and FPGA Image Notes <./images.html>`_ +* `USRP1 Application Notes <./usrp1.html>`_ +* `USRP2 Application Notes <./usrp2.html>`_ +* `USRP-N2XX Series Application Notes <./usrp2.html>`_ +* `USRP-E1XX Series Application Notes <./usrp_e1xx.html>`_ +* `Daughterboard Application Notes <./dboards.html>`_ +* `Transport Application Notes <./transport.html>`_ + +^^^^^^^^^^^^^^^^^^^^^ +API Documentation +^^^^^^^^^^^^^^^^^^^^^ +* `Doxygen <./../../doxygen/html/index.html>`_ +* `Using the API <./coding.html>`_ + diff --git a/host/docs/style.css b/host/docs/style.css new file mode 100644 index 000000000..bf97bf007 --- /dev/null +++ b/host/docs/style.css @@ -0,0 +1,102 @@ +body{ +font-family:Arial, Helvetica, sans-serif; +font-size:11pt; +color:black; +background-color:white; +width:90%; +margin:0 auto 0 auto; +} + +div.document div.contents{ +border:1px solid #333333; +padding:10px 30px 10px 10px; +margin-left:50px; +color:inherit; +background-color:#FCFCFC; +display:inline-block; +} + +div.document p.topic-title{ +font-weight:bold; +} + +div.document a:link, div.document a:visited{ +color:#236B8E; +background-color:inherit; +text-decoration:none; +} + +div.document a:hover{ +color:#4985D6; +background-color:inherit; +text-decoration:none; +} + +div.document h1.title{ +font-size:150%; +border-left:1px solid #333333; +border-bottom:1px solid #333333; +text-align:left; +padding:10px 0px 10px 10px; +margin:10px 5px 20px 5px; +color:#333333; +background-color:inherit; +} + +div.document h2.subtitle, div.section h1{ +margin-top:50px; +border-bottom:1px solid #333333; +font-size:140%; +text-align:center; +padding:20px 0px 10px 0px; +color:#333333; +background-color:inherit; +} + +div.section h2{ +font-size:110%; +text-align:left; +padding:15px 0px 5px 0px; +text-decoration:underline; +color:#333333; +background-color:inherit; +} + +div.document pre.literal-block{ +border:1px inset #333333; +padding:5px; +margin:10px 5px 10px 5px; +color:inherit; +background-color:#FCFCFC; +font-size:90%; +} + +div.document table{ +padding:5px; +font-size:95%; +} + +div.document th{ +padding:3px 7px 3px 7px; +border:1px solid #333333; +text-align:center; +color:inherit; +background-color:#ECECEC; +} + +div.document tr{ +} + +div.document td{ +padding:3px 7px 3px 7px; +border:1px solid #333333; +text-align:center; +color:inherit; +background-color:#FCFCFC; +} + +div.footer{ +margin:50px auto 30px auto; +text-align:center; +font-size:85%; +} diff --git a/host/docs/transport.rst b/host/docs/transport.rst new file mode 100644 index 000000000..2371d2497 --- /dev/null +++ b/host/docs/transport.rst @@ -0,0 +1,98 @@ +======================================================================== +UHD - Transport Application Notes +======================================================================== + +.. contents:: Table of Contents + +------------------------------------------------------------------------ +Introduction +------------------------------------------------------------------------ +A transport is the layer between the packet interface and a device IO interface. +The advanced user can pass optional parameters +into the underlying transport layer through the device address. +These optional parameters control how the transport object allocates memory, +resizes kernel buffers, spawns threads, etc. +When not spcified, the transport layer will use values for these parameters +that are known to perform well on a variety of systems. +The transport parameters are defined below for the various transports in the UHD: + +------------------------------------------------------------------------ +UDP transport (sockets) +------------------------------------------------------------------------ +The UDP transport is implemented with standard user-space/Berkeley sockets. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Transport parameters +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The following parameters can be used to alter the transport's default behavior: + +* **recv_frame_size:** The size of a single receive buffer in bytes +* **num_recv_frames:** The number of receive buffers to allocate +* **send_frame_size:** The size of a single send buffer in bytes +* **num_send_frames:** The number of send buffers to allocate + +**Note1:** num_recv_frames and num_send_frames do not affect performance. + +**Note2:** recv_frame_size and send_frame_size can be used to +increase or decrease the maximum number of samples per packet. +The frame sizes default to an MTU of 1472 bytes per IP/UDP packet, +and may be increased if permitted by your network hardware. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Flow control parameters +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The host-based flow control expects periodic update packets from the device. +These update packets inform the host of the last packet consumed by the device, +which allows the host to determine throttling conditions for the transmission of packets. +The following mechanisms affect the transmission of periodic update packets: + +* **ups_per_fifo:** The number of update packets for each FIFO's worth of bytes sent into the device +* **ups_per_sec:** The number of update packets per second (disabled by default) + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Resize socket buffers +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +It may be useful increase the size of the socket buffers to +move the burden of buffering samples into the kernel, or to +buffer incoming samples faster than they can be processed. +However, if your application cannot process samples fast enough, +no amount of buffering can save you. +The following parameters can be used to alter socket's buffer sizes: + +* **recv_buff_size:** The desired size of the receive buffer in bytes +* **send_buff_size:** The desired size of the send buffer in bytes + +**Note:** Large send buffers tend to decrease transmit performance. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Linux specific notes +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +On linux, the maximum buffer sizes are capped by the sysctl values +**net.core.rmem_max** and **net.core.wmem_max**. +To change the maximum values, run the following commands: +:: + + sudo sysctl -w net.core.rmem_max=<new value> + sudo sysctl -w net.core.wmem_max=<new value> + +Set the values permanently by editing */etc/sysctl.conf* + +------------------------------------------------------------------------ +USB transport (libusb) +------------------------------------------------------------------------ +The USB transport is implemented with libusb. +Libusb provides an asynchronous API for USB bulk transfers. +The transport implementation allocates a number of buffers +and submits asynchronous requests through libusb. +Event handler threads run in the background to process these requests. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Transport parameters +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The following parameters can be used to alter the transport's default behavior: + +* **recv_frame_size:** The size of a single receive transfers in bytes +* **num_recv_frames:** The number of simultaneous receive transfers +* **send_frame_size:** The size of a single send transfers in bytes +* **num_send_frames:** The number of simultaneous send transfers +* **concurrency_hint:** The number of threads to run the event handler diff --git a/host/docs/usrp1.rst b/host/docs/usrp1.rst new file mode 100644 index 000000000..f77a26e0a --- /dev/null +++ b/host/docs/usrp1.rst @@ -0,0 +1,141 @@ +======================================================================== +UHD - USRP1 Application Notes +======================================================================== + +.. contents:: Table of Contents + +------------------------------------------------------------------------ +Specify a non-standard image +------------------------------------------------------------------------ +The standard USRP1 images installer comes with two FPGA images: + * **usrp1_fpga.rbf:** 2 DDCs + 2 DUCs + * **usrp1_fpga_4rx.rbf:** 4 DDCs + 0 DUCs + +By default, the USRP1 uses the FPGA image with 2 DDCs and 2 DUCs. +However, a device address parameter can be used to override +the FPGA image selection to use an alternate or a custom FPGA image. +See the images application notes for installing custom images. + +Example device address string representations to specify non-standard firmware and/or FPGA images: + +:: + + fpga=usrp1_fpga_4rx.rbf + + -- OR -- + + fw=usrp1_fw_custom.ihx + + -- OR -- + + fpga=usrp1_fpga_4rx.rbf, fw=usrp1_fw_custom.ihx + +------------------------------------------------------------------------ +Specifying the subdevice to use +------------------------------------------------------------------------ +The USRP1 has multiple daughterboard slots, known as slot A and slot B. +The subdevice specification can be used to select +the daughterboard and subdevice for each channel. +For daughterboards with one one subdevice, +the subdevice name may be left blank for automatic selection. + +Ex: The subdev spec markup string to select a WBX on slot B. +Notice the use of the blank subdevice name for automatic selection. + +:: + + B: + + -- OR -- + + B:0 + +Ex: The subdev spec markup string to select a BasicRX on slot B. +Notice that the subdevice name is always specified in the 3 possible cases. + +:: + + B:AB + + -- OR -- + + B:A + + -- OR -- + + B:B + +------------------------------------------------------------------------ +Missing and emulated features +------------------------------------------------------------------------ +The USRP1 FPGA does not have the necessary space to support the advanced +streaming capabilities that are possible with the newer USRP devices. +Some of these features are emulated in software to support the API. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +List of emulated features +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +* Setting the current device time +* Getting the current device time +* Transmitting at a specific time +* Transmitting a specific number of samples +* Receiving at a specific time +* Receiving a specific number of samples +* End of burst flags for transmit/receive + +**Note:** +These emulated features rely on the host system's clock for timed operations, +and therefore may not have sufficient precision for the application. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +List of missing features +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +* Notification on late stream command +* Notification on late transmit packet +* Notification on broken chain error +* Notification on underflow or overflow +* Start of burst flags for transmit/receive + +------------------------------------------------------------------------ +OS specific notes +------------------------------------------------------------------------ + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Linux - setup udev +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +On Linux, udev handles USB plug and unplug events. +The following commands create a udev rule for the USRP1 +so that non-root users may access the device: + +:: + + echo 'ACTION=="add", BUS=="usb", SYSFS{idVendor}=="fffe", SYSFS{idProduct}=="0002", MODE:="0666"' > tmpfile + sudo chown root.root tmpfile + sudo mv tmpfile /etc/udev/rules.d/10-usrp.rules + sudo udevadm control --reload-rules + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Windows - install driver +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +On Windows, a driver must be installed the first time the USRP1 is attached to the host computer. +A download link for this driver can be found on the UHD wiki page. +Download and unpack the driver, and direct the Windows driver install wizard to the .inf file. + +------------------------------------------------------------------------ +Hardware setup notes +------------------------------------------------------------------------ + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +External clock modification +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The USRP can be modified to accept an external clock reference instead of the 64MHz onboard reference. + * Solder SMA (LTI-SASF54GT) connector to J2001 + * Move 0 ohm 0603 resistor R2029 to R2030 + * Move 0.01uF 0603 capacitor C925 to C926 + * Remove 0.01uF 0603 capacitor C924 + +The new external clock needs to be a square wave between +7dBm and +15dBm + +For the correct clock settings, call usrp->set_master_clock_rate(EXT_CLOCK_FREQUENCY) +before any other parameters are set in your application. + diff --git a/host/docs/usrp2.rst b/host/docs/usrp2.rst new file mode 100644 index 000000000..70101bd87 --- /dev/null +++ b/host/docs/usrp2.rst @@ -0,0 +1,344 @@ +======================================================================== +UHD - USRP2 and N Series Application Notes +======================================================================== + +.. contents:: Table of Contents + +------------------------------------------------------------------------ +Load the images onto the SD card (USRP2 only) +------------------------------------------------------------------------ +**Warning!** +Use the usrp2_card_burner.py with caution. If you specify the wrong device node, +you could overwrite your hard drive. Make sure that --dev= specifies the SD card. + +**Warning!** +It is possible to use 3rd party SD cards with the USRP2. +However, certain types of SD cards will not interface with the CPLD: + +* Cards can be SDHC, which is not a supported interface. +* Cards can have unexpected timing characteristics. + +For these reasons, we recommend that you use the SD card that was supplied with the USRP2. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Use the card burner tool (unix) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +:: + + sudo <prefix>/share/uhd/utils/usrp2_card_burner_gui.py + + -- OR -- + + cd <prefix>/share/uhd/utils + sudo ./usrp2_card_burner.py --dev=/dev/sd<XXX> --fpga=<path_to_fpga_image> + sudo ./usrp2_card_burner.py --dev=/dev/sd<XXX> --fw=<path_to_firmware_image> + +Use the *--list* option to get a list of possible raw devices. +The list result will filter out disk partitions and devices too large to be the sd card. +The list option has been implemented on Linux, Mac OS X, and Windows. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Use the card burner tool (windows) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +:: + + <path_to_python.exe> <prefix>/share/uhd/utils/usrp2_card_burner_gui.py + + +------------------------------------------------------------------------ +Load the images onto the on-board flash (USRP-N Series only) +------------------------------------------------------------------------ +The USRP-N Series can be reprogrammed over the network +to update or change the firmware and FPGA images. +When updating images, always burn both the FPGA and firmware images before power cycling. +This ensures that when the device reboots, it has a compatible set of images to boot into. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Use the net burner tool (unix) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +:: + + cd <prefix>/share/uhd/utils + ./usrp_n2xx_net_burner.py --ip=<ip address> --fw=<path for firmware image> + ./usrp_n2xx_net_burner.py --ip=<ip address> --fpga=<path to FPGA image> + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Use the net burner tool (Windows) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +:: + + <path_to_python.exe> <prefix>/share/uhd/utils/usrp_n2xx_net_burner.py --ip=<ip address> --fw=<path for firmware image> + <path_to_python.exe> <prefix>/share/uhd/utils/usrp_n2xx_net_burner.py --ip=<ip address> --fpga=<path to FPGA image> + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Device recovery and bricking +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Its possible to put the device into an unusable state by loading bad images. +Fortunately, the USRP-N Series can be booted into a safe (read-only) image. +Once booted into the safe image, the user can once again load images onto the device. + +The safe-mode button is a pushbutton switch (S2) located inside the enclosure. +To boot into the safe image, hold-down the safe-mode button while power-cycling the device. +Continue to hold-down the button until the front-panel LEDs blink and remain solid. + +When in safe-mode, the USRP-N device will always have the IP address 192.168.10.2 + +------------------------------------------------------------------------ +Setup networking +------------------------------------------------------------------------ +The USRP2 only supports gigabit ethernet, +and will not work with a 10/100 Mbps interface. +However, a 10/100 Mbps interface can be connected indirectly +to a USRP2 through a gigabit ethernet switch. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Setup the host interface +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The USRP2 communicates at the IP/UDP layer over the gigabit ethernet. +The default IP address of the USRP2 is **192.168.10.2** +You will need to configure the host's ethernet interface with a static IP address to enable communication. +An address of **192.168.10.1** and a subnet mask of **255.255.255.0** is recommended. + +**Note:** +When using the UHD, if an IP address for the USRP2 is not specified, +the software will use UDP broadcast packets to locate the USRP2. +On some systems, the firewall will block UDP broadcast packets. +It is recommended that you change or disable your firewall settings. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Multiple devices per host +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +For maximum throughput, one ethernet interface per USRP2 is recommended, +although multiple devices may be connected via a gigabit ethernet switch. +In any case, each ethernet interface should have its own subnet, +and the corresponding USRP2 device should be assigned an address in that subnet. +Example: + +**Configuration for USRP2 device 0:** + +* Ethernet interface IPv4 address: 192.168.10.1 +* Ethernet interface subnet mask: 255.255.255.0 +* USRP2 device IPv4 address: 192.168.10.2 + +**Configuration for USRP2 device 1:** + +* Ethernet interface IPv4 address: 192.168.20.1 +* Ethernet interface subnet mask: 255.255.255.0 +* USRP2 device IPv4 address: 192.168.20.2 + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Change the USRP2's IP address +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +You may need to change the USRP2's IP address for several reasons: + +* to satisfy your particular network configuration +* to use multiple USRP2s on the same host computer +* to set a known IP address into USRP2 (in case you forgot) + +**Method 1:** +To change the USRP2's IP address +you must know the current address of the USRP2, +and the network must be setup properly as described above. +Run the following commands: +:: + + cd <prefix>/share/uhd/utils + ./usrp_burn_mb_eeprom --args=<optional device args> --key=ip-addr --val=192.168.10.3 + +**Method 2 (Linux Only):** +This method assumes that you do not know the IP address of your USRP2. +It uses raw ethernet packets to bypass the IP/UDP layer to communicate with the USRP2. +Run the following commands: +:: + + cd <prefix>/share/uhd/utils + sudo ./usrp2_recovery.py --ifc=eth0 --new-ip=192.168.10.3 + +------------------------------------------------------------------------ +Communication problems +------------------------------------------------------------------------ +When setting up a development machine for the first time, +you may have various difficulties communicating with the USRP device. +The following tips are designed to help narrow-down and diagnose the problem. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Firewall issues +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +When the IP address is not specified, +the device discovery sends broadcast UDP packets from each ethernet interface. +Many firewalls will block the replies to these broadcast packets. +If disabling your system's firewall, +or specifying the IP address yeilds a discovered device, +then your firewall may be blocking replies to UDP broadcast packets. +If this is the case, we recommend that you disable the firewall, +or create a rule to allow all incoming packets with UDP source port 49152. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Ping the device +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The USRP will reply to icmp echo requests. +A successful ping response means that the device has booted properly, +and that it is using the expected IP address. + +:: + + ping 192.168.10.2 + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Monitor the serial output +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Read the serial port to get debug verbose from the embedded microcontroller. +The microcontroller prints useful information about IP addresses, +MAC addresses, control packets, fast-path settings, and bootloading. +Use a standard USB to 3.3v-level serial converter at 230400 baud. +Connect GND to the converter ground, and connect TXD to the converter receive. +The RXD pin can be left unconnected as this is only a one-way communication. + +* **USRP2:** Serial port located on the rear edge +* **N210:** Serial port located on the left side + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Monitor the host network traffic +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Use wireshark to monitor packets sent to and received from the device. + +------------------------------------------------------------------------ +Addressing the device +------------------------------------------------------------------------ + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Single device configuration +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +In a single-device configuration, +the USRP device must have a unique IPv4 address on the host computer. +The USRP can be identified through its IPv4 address, resolvable hostname, or by other means. +See the application notes on `device identification <./identification.html>`_. +Use this addressing scheme with the *single_usrp* interface. + +Example device address string representation for a USRP2 with IPv4 address 192.168.10.2 + +:: + + addr=192.168.10.2 + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Multiple device configuration +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +In a multi-device configuration, +each USRP device must have a unique IPv4 address on the host computer. +The device address parameter keys must be suffixed with the device index. +Each parameter key should be of the format <key><index>. +Use this addressing scheme with the *multi_usrp* interface. + +* The order in which devices are indexed corresponds to the indexing of the transmit and receive channels. +* The key indexing provides the same granularity of device identification as in the single device case. + +Example device address string representation for 2 USRP2s with IPv4 addresses 192.168.10.2 and 192.168.20.2 +:: + + addr0=192.168.10.2, addr1=192.168.20.2 + +------------------------------------------------------------------------ +Using the MIMO Cable +------------------------------------------------------------------------ +The MIMO cable allows two USRP devices to share reference clocks, +time synchronization, and the ethernet interface. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Shared ethernet mode +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +In shared ethernet mode, +only one device in the configuration can be attached to the ethernet. +This device will be referred to as the master, and the other device, the slave. + +* The master provides reference clock and time synchronization to the slave. +* All data passing between the host and the slave is routed over the MIMO cable. +* Both master and slave must have different IPv4 addresses in the same subnet. +* The master and slave may be used individually or in a multi-device configuration. +* External clocking is optional, and should only be supplied to the master device. +* The role of slave and master may be switched with the "mimo_mode" device address (see dual ethernet mode). + +Example device address string representation for 2 USRP2s with IPv4 addresses 192.168.10.2 (master) and 192.168.10.3 (slave) +:: + + -- Multi-device example -- + + addr0=192.168.10.2, addr1=192.168.10.3 + + -- Two single devices example -- + + addr=192.168.10.2 + + addr=192.168.10.3 + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Dual ethernet mode +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +In dual ethernet mode, +both devices in the configuration must be attached to the ethernet. +One of the devices in the configuration will be configured to provide synchronization. +This device will be referred to as the master, and the other device, the slave. + +* The master provides reference clock and time synchronization to the slave. +* The devices require the special device address argument "mimo_mode" set. +* Both master and slave must have different IPv4 addresses in different subnets. +* The master and slave may be used individually or in a multi-device configuration. +* External clocking is optional, and should only be supplied to the master device. + +Example device address string representation for 2 USRP2s with IPv4 addresses 192.168.10.2 (master) and 192.168.20.2 (slave) +:: + + -- Multi-device example -- + + addr0=192.168.10.2, mimo_mode0=master, addr1=192.168.20.2, mimo_mode1=slave + + -- Two single devices example -- + + addr=192.168.10.2, mimo_mode=master + + addr=192.168.20.2, mimo_mode=slave + +------------------------------------------------------------------------ +Hardware setup notes +------------------------------------------------------------------------ + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Front panel LEDs +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The LEDs on the front panel can be useful in debugging hardware and software issues. +The LEDs reveal the following about the state of the device: + +* **LED A:** transmitting +* **LED B:** mimo cable link +* **LED C:** receiving +* **LED D:** firmware loaded +* **LED E:** reference lock +* **LED F:** CPLD loaded + + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Ref Clock - 10MHz +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Using an external 10MHz reference clock, square wave will offer the best phase +noise performance, but sinusoid is acceptable. The reference clock requires the following power level: + +* **USRP2** 5 to 15dBm +* **N2XX** 0 to 15dBm + + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +PPS - Pulse Per Second +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Using a PPS signal for timestamp synchronization requires a square wave signal with the following amplitude: + +* **USRP2** 5Vpp +* **N2XX** 3.3 to 5Vpp + +Test the PPS input with the following app: + +* <args> are device address arguments (optional if only one USRP is on your machine) + +:: + + cd <prefix>/share/uhd/examples + ./test_pps_input --args=<args> diff --git a/host/docs/usrp_e1xx.rst b/host/docs/usrp_e1xx.rst new file mode 100644 index 000000000..ffcd370dd --- /dev/null +++ b/host/docs/usrp_e1xx.rst @@ -0,0 +1,65 @@ +======================================================================== +UHD - USRP-E1XX Series Application Notes +======================================================================== + +.. contents:: Table of Contents + +------------------------------------------------------------------------ +Specify a non-standard image +------------------------------------------------------------------------ +The UHD will automatically select the USRP embedded FPGA image from the installed images package. +The FPGA image selection can be overridden with the "fpga" device address parameter. + +Example device address string representations to specify non-standard FPGA image: + +:: + + fpga=usrp_e100_custom.bin + +------------------------------------------------------------------------ +Changing the master clock rate +------------------------------------------------------------------------ +The master clock rate of the USRP embedded feeds both the FPGA DSP and the codec chip. +UHD can dynamically reconfigure the clock rate though the set_master_clock_rate() API call. +Hundreds of rates between 32MHz and 64MHz are available. +A few notable rates are: + +* 64MHz - maximum rate of the codec chip +* 61.44MHz - good for UMTS/WCDMA applications +* 52Mhz - good for GSM applications + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Set 61.44MHz - uses external VCXO +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +To use the 61.44MHz clock rate, the USRP embedded will require two jumpers to be moved. + +* J16 is a two pin header, remove the jumper (or leave it on pin1 only) +* J15 is a three pin header, move the jumper to (pin1, pin2) + +For the correct clock settings, call usrp->set_master_clock_rate(61.44e6) +before any other parameters are set in your application. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Set other rates - uses internal VCO +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +To use other clock rates, the jumpers will need to be in the default position. + +* J16 is a two pin header, move the jumper to (pin1, pin2) +* J15 is a three pin header, move the jumper to (pin2, pin3) + +For the correct clock settings, call usrp->set_master_clock_rate(rate) +before any other parameters are set in your application. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Clock rate recovery - unbricking +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +It is possible to set a clock rate such that the UHD can no longer communicate with the FPGA. +When this occurs, it is necessary to use the usrp-e-utility to recover the clock generator. +The recovery utility works by loading a special pass-through FPGA image so the computer +can talk directly to the clock generator over a SPI interface. + +Run the following commands to restore the clock generator to a usable state: +:: + + cd <prefix>/share/uhd/usrp_e_utilities + ./usrp-e-utility --fpga=../images/usrp_e100_pt_fpga.bin --reclk diff --git a/host/examples/CMakeLists.txt b/host/examples/CMakeLists.txt new file mode 100644 index 000000000..44ed55380 --- /dev/null +++ b/host/examples/CMakeLists.txt @@ -0,0 +1,53 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# example applications +######################################################################## +SET(example_sources + benchmark_rx_rate.cpp + rx_multi_samples.cpp + rx_samples_to_file.cpp + rx_samples_to_udp.cpp + rx_timed_samples.cpp + test_async_messages.cpp + test_pps_input.cpp + tx_samples_from_file.cpp + tx_timed_samples.cpp + tx_waveforms.cpp + latency_test.cpp +) + +#for each source: build an executable and install +FOREACH(example_source ${example_sources}) + GET_FILENAME_COMPONENT(example_name ${example_source} NAME_WE) + ADD_EXECUTABLE(${example_name} ${example_source}) + TARGET_LINK_LIBRARIES(${example_name} uhd) + INSTALL(TARGETS ${example_name} RUNTIME DESTINATION ${PKG_DATA_DIR}/examples) +ENDFOREACH(example_source) + +######################################################################## +# ASCII Art DFT - requires curses, so this part is optional +######################################################################## +FIND_PACKAGE(Curses) + +IF(CURSES_FOUND) + INCLUDE_DIRECTORIES(${CURSES_INCLUDE_DIR}) + ADD_EXECUTABLE(rx_ascii_art_dft rx_ascii_art_dft.cpp) + TARGET_LINK_LIBRARIES(rx_ascii_art_dft uhd ${CURSES_LIBRARIES}) + INSTALL(TARGETS rx_ascii_art_dft RUNTIME DESTINATION ${PKG_DATA_DIR}/examples) +ENDIF(CURSES_FOUND) diff --git a/host/examples/ascii_art_dft.hpp b/host/examples/ascii_art_dft.hpp new file mode 100644 index 000000000..ee2267c2d --- /dev/null +++ b/host/examples/ascii_art_dft.hpp @@ -0,0 +1,320 @@ +// +// ASCII Art DFT Plotter - Josh Blum +// + +#ifndef ASCII_ART_DFT_HPP +#define ASCII_ART_DFT_HPP + +#include <string> +#include <cstddef> +#include <vector> +#include <complex> +#include <stdexcept> + +namespace acsii_art_dft{ + + //! Type produced by the log power DFT function + typedef std::vector<float> log_pwr_dft_type; + + /*! + * Get a logarithmic power DFT of the input samples. + * Samples are expected to be in the range [-1.0, 1.0]. + * \param samps a pointer to an array of complex samples + * \param nsamps the number of samples in the array + * \return a real range of DFT bins in units of dB + */ + template <typename T> log_pwr_dft_type log_pwr_dft( + const std::complex<T> *samps, size_t nsamps + ); + + /*! + * Convert a DFT to a piroundable ascii plot. + * \param dft the log power dft bins + * \param width the frame width in characters + * \param height the frame height in characters + * \param samp_rate the sample rate in Sps + * \param dc_freq the DC frequency in Hz + * \param dyn_rng the dynamic range in dB + * \param ref_lvl the reference level in dB + * \return the plot as an ascii string + */ + std::string dft_to_plot( + const log_pwr_dft_type &dft, + size_t width, + size_t height, + double samp_rate, + double dc_freq, + float dyn_rng, + float ref_lvl + ); + +} //namespace ascii_dft + +/*********************************************************************** + * Implementation includes + **********************************************************************/ +#include <cmath> +#include <sstream> +#include <algorithm> + +/*********************************************************************** + * Helper functions + **********************************************************************/ +namespace {/*anon*/ + + static const double pi = double(std::acos(-1.0)); + + //! Round a floating-point value to the nearest integer + template <typename T> int iround(T val){ + return (val > 0)? int(val + 0.5) : int(val - 0.5); + } + + //! Pick the closest number that is nice to display + template <typename T> T to_clean_num(const T num){ + if (num == 0) return 0; + const T pow10 = std::pow(T(10), int(std::floor(std::log10(std::abs(num))))); + const T norm = std::abs(num)/pow10; + static const int cleans[] = {1, 2, 5, 10}; + int clean = cleans[0]; + for (size_t i = 1; i < sizeof(cleans)/sizeof(cleans[0]); i++){ + if (std::abs(norm - cleans[i]) < std::abs(norm - clean)) + clean = cleans[i]; + } + return ((num < 0)? -1 : 1)*clean*pow10; + } + + //! Compute an FFT with pre-computed factors using Cooley-Tukey + template <typename T> std::complex<T> ct_fft_f( + const std::complex<T> *samps, size_t nsamps, + const std::complex<T> *factors, + size_t start = 0, size_t step = 1 + ){ + if (nsamps == 1) return samps[start]; + std::complex<T> E_k = ct_fft_f(samps, nsamps/2, factors+1, start, step*2); + std::complex<T> O_k = ct_fft_f(samps, nsamps/2, factors+1, start+step, step*2); + return E_k + factors[0]*O_k; + } + + //! Compute an FFT for a particular bin k using Cooley-Tukey + template <typename T> std::complex<T> ct_fft_k( + const std::complex<T> *samps, size_t nsamps, size_t k + ){ + //pre-compute the factors to use in Cooley-Tukey + std::vector<std::complex<T> > factors; + for (size_t N = nsamps; N != 0; N /= 2){ + factors.push_back(std::exp(std::complex<T>(0, T(-2*pi*k/N)))); + } + return ct_fft_f(samps, nsamps, &factors.front()); + } + + //! Helper class to build a DFT plot frame + class frame_type{ + public: + frame_type(size_t width, size_t height): + _frame(width-1, std::vector<char>(height, ' ')) + { + /* NOP */ + } + + //accessors to parts of the frame + char &get_plot(size_t b, size_t z){return _frame.at(b+albl_w).at(z+flbl_h);} + char &get_albl(size_t b, size_t z){return _frame.at(b) .at(z+flbl_h);} + char &get_ulbl(size_t b) {return _frame.at(b) .at(flbl_h-1);} + char &get_flbl(size_t b) {return _frame.at(b+albl_w).at(flbl_h-1);} + + //dimension accessors + size_t get_plot_h(void) const{return _frame.front().size() - flbl_h;} + size_t get_plot_w(void) const{return _frame.size() - albl_w;} + size_t get_albl_w(void) const{return albl_w;} + + std::string to_string(void){ + std::stringstream frame_ss; + for (size_t z = 0; z < _frame.front().size(); z++){ + for (size_t b = 0; b < _frame.size(); b++){ + frame_ss << _frame[b][_frame[b].size()-z-1]; + } + frame_ss << std::endl; + } + return frame_ss.str(); + } + + private: + static const size_t albl_w = 6, flbl_h = 1; + std::vector<std::vector<char> > _frame; + }; + +} //namespace /*anon*/ + +/*********************************************************************** + * Implementation code + **********************************************************************/ +namespace acsii_art_dft{ + + //! skip constants for amplitude and frequency labels + static const size_t albl_skip = 5, flbl_skip = 20; + + template <typename T> log_pwr_dft_type log_pwr_dft( + const std::complex<T> *samps, size_t nsamps + ){ + if (nsamps & (nsamps - 1)) + throw std::runtime_error("num samps is not a power of 2"); + + //compute the window + double win_pwr = 0; + std::vector<std::complex<T> > win_samps; + for(size_t n = 0; n < nsamps; n++){ + //double w_n = 1; + //double w_n = 0.54 //hamming window + // -0.46*std::cos(2*pi*n/(nsamps-1)) + //; + double w_n = 0.35875 //blackman-harris window + -0.48829*std::cos(2*pi*n/(nsamps-1)) + +0.14128*std::cos(4*pi*n/(nsamps-1)) + -0.01168*std::cos(6*pi*n/(nsamps-1)) + ; + //double w_n = 1 // flat top window + // -1.930*std::cos(2*pi*n/(nsamps-1)) + // +1.290*std::cos(4*pi*n/(nsamps-1)) + // -0.388*std::cos(6*pi*n/(nsamps-1)) + // +0.032*std::cos(8*pi*n/(nsamps-1)) + //; + win_samps.push_back(T(w_n)*samps[n]); + win_pwr += w_n*w_n; + } + + //compute the log-power dft + log_pwr_dft_type log_pwr_dft; + for(size_t k = 0; k < nsamps; k++){ + std::complex<T> dft_k = ct_fft_k(&win_samps.front(), nsamps, k); + log_pwr_dft.push_back(float( + + 20*std::log10(std::abs(dft_k)) + - 20*std::log10(T(nsamps)) + - 10*std::log10(win_pwr/nsamps) + + 3 + )); + } + + return log_pwr_dft; + } + + std::string dft_to_plot( + const log_pwr_dft_type &dft_, + size_t width, + size_t height, + double samp_rate, + double dc_freq, + float dyn_rng, + float ref_lvl + ){ + frame_type frame(width, height); //fill this frame + + //re-order the dft so dc in in the center + const size_t num_bins = dft_.size() - 1 + dft_.size()%2; //make it odd + log_pwr_dft_type dft(num_bins); + for (size_t n = 0; n < num_bins; n++){ + dft[n] = dft_[(n + num_bins/2)%num_bins]; + } + + //fill the plot with dft bins + for (size_t b = 0; b < frame.get_plot_w(); b++){ + //indexes from the dft to grab for the plot + const size_t n_start = std::max(iround(double(b-0.5)*(num_bins-1)/(frame.get_plot_w()-1)), 0); + const size_t n_stop = std::min(iround(double(b+0.5)*(num_bins-1)/(frame.get_plot_w()-1)), int(num_bins)); + + //calculate val as the max across points + float val = dft.at(n_start); + for (size_t n = n_start; n < n_stop; n++) val = std::max(val, dft.at(n)); + + const float scaled = (val - (ref_lvl - dyn_rng))*(frame.get_plot_h()-1)/dyn_rng; + for (size_t z = 0; z < frame.get_plot_h(); z++){ + static const std::string syms(".:!|"); + if (scaled-z > 1) frame.get_plot(b, z) = syms.at(syms.size()-1); + else if (scaled-z > 0) frame.get_plot(b, z) = syms.at(size_t((scaled-z)*syms.size())); + } + } + + //create vertical amplitude labels + const float db_step = to_clean_num(dyn_rng/(frame.get_plot_h()-1)*albl_skip); + for ( + float db = db_step*(int((ref_lvl - dyn_rng)/db_step)); + db <= db_step*(int(ref_lvl/db_step)); + db += db_step + ){ + const int z = iround((db - (ref_lvl - dyn_rng))*(frame.get_plot_h()-1)/dyn_rng); + if (z < 0 or size_t(z) >= frame.get_plot_h()) continue; + std::stringstream ss; ss << db; std::string lbl = ss.str(); + for (size_t i = 0; i < lbl.size() and i < frame.get_albl_w(); i++){ + frame.get_albl(i, z) = lbl[i]; + } + } + + //create vertical units label + std::string ulbl = "dBfs"; + for (size_t i = 0; i < ulbl.size(); i++){ + frame.get_ulbl(i+1) = ulbl[i]; + } + + //create horizontal frequency labels + const double f_step = to_clean_num(samp_rate/frame.get_plot_w()*flbl_skip); + for ( + double freq = f_step*int((-samp_rate/2/f_step)); + freq <= f_step*int((+samp_rate/2/f_step)); + freq += f_step + ){ + const int b = iround((freq + samp_rate/2)*(frame.get_plot_w()-1)/samp_rate); + std::stringstream ss; ss << (freq+dc_freq)/1e6 << "MHz"; std::string lbl = ss.str(); + if (b < int(lbl.size()/2) or b + lbl.size() - lbl.size()/2 >= frame.get_plot_w()) continue; + for (size_t i = 0; i < lbl.size(); i++){ + frame.get_flbl(b + i - lbl.size()/2) = lbl[i]; + } + } + + return frame.to_string(); + } +} //namespace ascii_dft + +#endif /*ASCII_ART_DFT_HPP*/ + +/* + +//example main function to test the dft + +#include <iostream> +#include <cstdlib> +#include <curses.h> + +int main(void){ + initscr(); + + while (true){ + clear(); + + std::vector<std::complex<float> > samples; + for(size_t i = 0; i < 512; i++){ + samples.push_back(std::complex<float>( + float(std::rand() - RAND_MAX/2)/(RAND_MAX)/4, + float(std::rand() - RAND_MAX/2)/(RAND_MAX)/4 + )); + samples[i] += 0.5*std::sin(i*3.14/2) + 0.7; + } + + acsii_art_dft::log_pwr_dft_type dft; + dft = acsii_art_dft::log_pwr_dft(&samples.front(), samples.size()); + + printw("%s", acsii_art_dft::dft_to_plot( + dft, COLS, LINES, + 12.5e4, 2.45e9, + 60, 0 + ).c_str()); + + sleep(1); + } + + + endwin(); + std::cout << "here\n"; + return 0; +} + +*/ + diff --git a/host/examples/benchmark_rx_rate.cpp b/host/examples/benchmark_rx_rate.cpp new file mode 100644 index 000000000..118bf413c --- /dev/null +++ b/host/examples/benchmark_rx_rate.cpp @@ -0,0 +1,162 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/math/special_functions/round.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +static inline void test_device( + uhd::usrp::multi_usrp::sptr usrp, + double rx_rate_sps, + double duration_secs +){ + const size_t max_samps_per_packet = usrp->get_device()->get_max_recv_samps_per_packet(); + std::cout << boost::format("Testing receive rate %f Msps (%f second run)") % (rx_rate_sps/1e6) % duration_secs << std::endl; + + //allocate recv buffer and metatdata + uhd::rx_metadata_t md; + std::vector<std::complex<float> > buff(max_samps_per_packet); + + //flush the buffers in the recv path + while(usrp->get_device()->recv( + &buff.front(), buff.size(), md, + uhd::io_type_t::COMPLEX_FLOAT32, + uhd::device::RECV_MODE_ONE_PACKET + )){ + /* NOP */ + }; + + //declare status variables + bool got_first_packet = false; + size_t total_recv_packets = 0; + size_t total_lost_samples = 0; + size_t total_recv_samples = 0; + uhd::time_spec_t initial_time_spec; + uhd::time_spec_t next_expected_time_spec; + + usrp->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS); + do { + size_t num_rx_samps = usrp->get_device()->recv( + &buff.front(), buff.size(), md, + uhd::io_type_t::COMPLEX_FLOAT32, + uhd::device::RECV_MODE_ONE_PACKET + ); + + //handle the error codes + switch(md.error_code){ + case uhd::rx_metadata_t::ERROR_CODE_NONE: + case uhd::rx_metadata_t::ERROR_CODE_OVERFLOW: + break; + + default: + std::cerr << "Error code: " << md.error_code << std::endl; + std::cerr << "Unexpected error on recv, exit test..." << std::endl; + return; + } + + if (not md.has_time_spec){ + std::cerr << "Metadata missing time spec, exit test..." << std::endl; + return; + } + + total_recv_samples += num_rx_samps; + total_recv_packets++; + + if (not got_first_packet){ + initial_time_spec = md.time_spec; + next_expected_time_spec = initial_time_spec; + got_first_packet = true; + } + + double approx_lost_samps = rx_rate_sps*(md.time_spec - next_expected_time_spec).get_real_secs(); + total_lost_samples += std::max(0, boost::math::iround(approx_lost_samps)); + next_expected_time_spec = md.time_spec + uhd::time_spec_t(0, num_rx_samps, rx_rate_sps); + + } while((next_expected_time_spec - initial_time_spec) < uhd::time_spec_t(duration_secs)); + usrp->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); + + //print a summary + std::cout << std::endl; //go to newline, recv may spew SXSYSZ... + std::cout << boost::format(" Received packets: %d") % total_recv_packets << std::endl; + std::cout << boost::format(" Received samples: %d") % total_recv_samples << std::endl; + std::cout << boost::format(" Lost samples: %d") % total_lost_samples << std::endl; + size_t packets_lost = boost::math::iround(double(total_lost_samples)/max_samps_per_packet); + std::cout << boost::format(" Lost packets: %d (approximate)") % packets_lost << std::endl; + double actual_rx_rate_sps = (total_recv_samples*rx_rate_sps)/(total_recv_samples+total_lost_samples); + std::cout << boost::format(" Sustained receive rate: %f Msps") % (actual_rx_rate_sps/1e6) << std::endl; + std::cout << std::endl << std::endl; +} + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + double duration; + double only_rate; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ("duration", po::value<double>(&duration)->default_value(10.0), "duration for each test in seconds") + ("rate", po::value<double>(&only_rate), "specify to perform a single test as this rate (sps)") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD Benchmark RX Rate %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + if (not vm.count("rate")){ + usrp->set_rx_rate(500e3); //initial rate + while(true){ + double rate = usrp->get_rx_rate(); + test_device(usrp, rate, duration); + usrp->set_rx_rate(rate*2); //double the rate + if (usrp->get_rx_rate() == rate) break; + } + } + else{ + usrp->set_rx_rate(only_rate); + double rate = usrp->get_rx_rate(); + test_device(usrp, rate, duration); + } + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/latency_test.cpp b/host/examples/latency_test.cpp new file mode 100644 index 000000000..85ac73567 --- /dev/null +++ b/host/examples/latency_test.cpp @@ -0,0 +1,167 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + size_t nsamps; + double rate; + double rtt; + size_t nruns; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ("nsamps", po::value<size_t>(&nsamps)->default_value(100), "number of samples per run") + ("nruns", po::value<size_t>(&nruns)->default_value(1000), "number of tests to perform") + ("rtt", po::value<double>(&rtt)->default_value(0.001), "delay between receive and transmit (seconds)") + ("rate", po::value<double>(&rate)->default_value(100e6/4), "sample rate for receive and transmit (sps)") + ("verbose", "specify to enable inner-loop verbose") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD - Latency Test %s") % desc << std::endl; + std::cout << + " Latency test receives a packet at time t,\n" + " and tries to send a packet at time t + rtt,\n" + " where rtt is the round trip time sample time\n" + " from device to host and back to the device.\n" + << std::endl; + return ~0; + } + + bool verbose = vm.count("verbose") != 0; + + //create a usrp device + std::cout << std::endl; + //std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + //std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + usrp->set_time_now(uhd::time_spec_t(0.0)); + + //set the tx sample rate + usrp->set_tx_rate(rate); + std::cout << boost::format("Actual TX Rate: %f Msps...") % (usrp->get_tx_rate()/1e6) << std::endl; + + //set the rx sample rate + usrp->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl; + + //allocate a buffer to use + std::vector<std::complex<float> > buffer(nsamps); + + //initialize result counts + int time_error = 0; + int ack = 0; + int underflow = 0; + int other = 0; + + for(size_t nrun = 0; nrun < nruns; nrun++){ + + /*************************************************************** + * Issue a stream command some time in the near future + **************************************************************/ + uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); + stream_cmd.num_samps = buffer.size(); + stream_cmd.stream_now = false; + stream_cmd.time_spec = usrp->get_time_now() + uhd::time_spec_t(0.01); + usrp->issue_stream_cmd(stream_cmd); + + /*************************************************************** + * Receive the requested packet + **************************************************************/ + uhd::rx_metadata_t rx_md; + size_t num_rx_samps = usrp->get_device()->recv( + &buffer.front(), buffer.size(), rx_md, + uhd::io_type_t::COMPLEX_FLOAT32, + uhd::device::RECV_MODE_FULL_BUFF + ); + + if(verbose) std::cout << boost::format("Got packet: %u samples, %u full secs, %f frac secs") + % num_rx_samps % rx_md.time_spec.get_full_secs() % rx_md.time_spec.get_frac_secs() << std::endl; + + /*************************************************************** + * Transmit a packet with delta time after received packet + **************************************************************/ + uhd::tx_metadata_t tx_md; + tx_md.start_of_burst = true; + tx_md.end_of_burst = true; + tx_md.has_time_spec = true; + tx_md.time_spec = rx_md.time_spec + uhd::time_spec_t(rtt); + size_t num_tx_samps = usrp->get_device()->send( + &buffer.front(), buffer.size(), tx_md, + uhd::io_type_t::COMPLEX_FLOAT32, + uhd::device::SEND_MODE_FULL_BUFF + ); + if(verbose) std::cout << boost::format("Sent %d samples") % num_tx_samps << std::endl; + + /*************************************************************** + * Check the async messages for result + **************************************************************/ + uhd::async_metadata_t async_md; + if (not usrp->get_device()->recv_async_msg(async_md)){ + std::cout << boost::format("failed:\n Async message recv timed out.\n") << std::endl; + continue; + } + switch(async_md.event_code){ + case uhd::async_metadata_t::EVENT_CODE_TIME_ERROR: + time_error++; + break; + + case uhd::async_metadata_t::EVENT_CODE_BURST_ACK: + ack++; + break; + + case uhd::async_metadata_t::EVENT_CODE_UNDERFLOW: + underflow++; + break; + + default: + std::cerr << boost::format( + "failed:\n Got unexpected event code 0x%x.\n" + ) % async_md.event_code << std::endl; + other++; + break; + } + } + + /*************************************************************** + * Print the summary + **************************************************************/ + std::cout << boost::format("\nACK %d, UNDERFLOW %d, TIME_ERR %d, other %d") + % ack % underflow % time_error % other << std::endl; + return 0; +} diff --git a/host/examples/rx_ascii_art_dft.cpp b/host/examples/rx_ascii_art_dft.cpp new file mode 100644 index 000000000..c407ecf91 --- /dev/null +++ b/host/examples/rx_ascii_art_dft.cpp @@ -0,0 +1,143 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include "ascii_art_dft.hpp" //implementation +#include <boost/program_options.hpp> +#include <boost/thread/thread.hpp> //gets time +#include <boost/format.hpp> +#include <curses.h> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + size_t num_bins; + double rate, freq, gain, frame_rate; + float ref_lvl, dyn_rng; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "multi uhd device address args") + // hardware parameters + ("rate", po::value<double>(&rate), "rate of incoming samples (sps)") + ("freq", po::value<double>(&freq)->default_value(0), "RF center frequency in Hz") + ("gain", po::value<double>(&gain)->default_value(0), "gain for the RF chain") + // display parameters + ("num-bins", po::value<size_t>(&num_bins)->default_value(512), "the number of bins in the DFT") + ("frame-rate", po::value<double>(&frame_rate)->default_value(5), "frame rate of the display (fps)") + ("ref-lvl", po::value<float>(&ref_lvl)->default_value(0), "reference level for the display (dB)") + ("dyn-rng", po::value<float>(&dyn_rng)->default_value(60), "dynamic range for the display (dB)") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help") or not vm.count("rate")){ + std::cout << boost::format("UHD RX ASCII Art DFT %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the rx sample rate + std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl << std::endl; + + //set the rx center frequency + std::cout << boost::format("Setting RX Freq: %f Mhz...") % (freq/1e6) << std::endl; + usrp->set_rx_freq(freq); + std::cout << boost::format("Actual RX Freq: %f Mhz...") % (usrp->get_rx_freq()/1e6) << std::endl << std::endl; + + //set the rx rf gain + std::cout << boost::format("Setting RX Gain: %f dB...") % gain << std::endl; + usrp->set_rx_gain(gain); + std::cout << boost::format("Actual RX Gain: %f dB...") % usrp->get_rx_gain() << std::endl << std::endl; + + //allocate recv buffer and metatdata + uhd::rx_metadata_t md; + std::vector<std::complex<float> > buff(num_bins); + //------------------------------------------------------------------ + //-- Initialize + //------------------------------------------------------------------ + initscr(); //curses init + usrp->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS); + boost::system_time next_refresh = boost::get_system_time(); + + //------------------------------------------------------------------ + //-- Main loop + //------------------------------------------------------------------ + while (true){ + //read a buffer's worth of samples every iteration + size_t num_rx_samps = usrp->get_device()->recv( + &buff.front(), buff.size(), md, + uhd::io_type_t::COMPLEX_FLOAT32, + uhd::device::RECV_MODE_FULL_BUFF + ); + if (num_rx_samps != buff.size()) continue; + + //check and update the display refresh condition + if (boost::get_system_time() < next_refresh) continue; + next_refresh = boost::get_system_time() + boost::posix_time::microseconds(long(1e6/frame_rate)); + + //calculate the dft and create the ascii art frame + acsii_art_dft::log_pwr_dft_type lpdft( + acsii_art_dft::log_pwr_dft(&buff.front(), num_rx_samps) + ); + std::string frame = acsii_art_dft::dft_to_plot( + lpdft, COLS, LINES, + usrp->get_rx_rate(), + usrp->get_rx_freq(), + dyn_rng, ref_lvl + ); + + //curses screen handling: clear and print frame + clear(); + printw("%s", frame.c_str()); + + //curses key handling: no timeout, any key to exit + timeout(0); + int ch = getch(); + if (ch != KEY_RESIZE and ch != ERR) break; + } + + //------------------------------------------------------------------ + //-- Cleanup + //------------------------------------------------------------------ + usrp->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); + endwin(); //curses done + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/rx_multi_samples.cpp b/host/examples/rx_multi_samples.cpp new file mode 100644 index 000000000..e820343ca --- /dev/null +++ b/host/examples/rx_multi_samples.cpp @@ -0,0 +1,158 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args, sync, subdev; + double seconds_in_future; + size_t total_num_samps; + double rate; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ("secs", po::value<double>(&seconds_in_future)->default_value(1.5), "number of seconds in the future to receive") + ("nsamps", po::value<size_t>(&total_num_samps)->default_value(10000), "total number of samples to receive") + ("rate", po::value<double>(&rate)->default_value(100e6/16), "rate of incoming samples") + ("sync", po::value<std::string>(&sync)->default_value("now"), "synchronization method: now, pps") + ("subdev", po::value<std::string>(&subdev)->default_value(""), "subdev spec (homogeneous across motherboards)") + ("dilv", "specify to disable inner-loop verbose") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD RX Multi Samples %s") % desc << std::endl; + std::cout << + " This is a demonstration of how to receive aligned data from multiple channels.\n" + " This example can receive from multiple DSPs, multiple motherboards, or both.\n" + " The MIMO cable or PPS can be used to synchronize the configuration. See --sync\n" + "\n" + " Specify --subdev to select multiple channels per motherboard.\n" + " Ex: --subdev=\"0:A 0:B\" to get 2 channels on a Basic RX.\n" + "\n" + " Specify --args to select multiple motherboards in a configuration.\n" + " Ex: --args=\"addr0=192.168.10.2, addr1=192.168.10.3\"\n" + << std::endl; + return ~0; + } + + bool verbose = vm.count("dilv") == 0; + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + + //always select the subdevice first, the channel mapping affects the other settings + if (vm.count("subdev")) usrp->set_rx_subdev_spec(subdev); //sets across all mboards + + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the rx sample rate (sets across all channels) + std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl << std::endl; + + std::cout << boost::format("Setting device timestamp to 0...") << std::endl; + if (sync == "now"){ + usrp->set_time_now(uhd::time_spec_t(0.0)); + boost::this_thread::sleep(boost::posix_time::milliseconds(50)); //wait for mimo cable time sync + } + else if (sync == "pps"){ + usrp->set_time_unknown_pps(uhd::time_spec_t(0.0)); + boost::this_thread::sleep(boost::posix_time::seconds(1)); //wait for pps sync pulse + } + + //setup streaming + std::cout << std::endl; + std::cout << boost::format( + "Begin streaming %u samples, %f seconds in the future..." + ) % total_num_samps % seconds_in_future << std::endl; + uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); + stream_cmd.num_samps = total_num_samps; + stream_cmd.stream_now = false; + stream_cmd.time_spec = uhd::time_spec_t(seconds_in_future); + usrp->issue_stream_cmd(stream_cmd); //tells all channels to stream + + //meta-data will be filled in by recv() + uhd::rx_metadata_t md; + + //allocate buffers to receive with samples (one buffer per channel) + size_t samps_per_buff = usrp->get_device()->get_max_recv_samps_per_packet(); + std::vector<std::vector<std::complex<float> > > buffs( + usrp->get_rx_num_channels(), std::vector<std::complex<float> >(samps_per_buff) + ); + + //create a vector of pointers to point to each of the channel buffers + std::vector<std::complex<float> *> buff_ptrs; + for (size_t i = 0; i < buffs.size(); i++) buff_ptrs.push_back(&buffs[i].front()); + + //the first call to recv() will block this many seconds before receiving + double timeout = seconds_in_future + 0.1; //timeout (delay before receive + padding) + + size_t num_acc_samps = 0; //number of accumulated samples + while(num_acc_samps < total_num_samps){ + //receive a single packet + size_t num_rx_samps = usrp->get_device()->recv( + buff_ptrs, samps_per_buff, md, + uhd::io_type_t::COMPLEX_FLOAT32, + uhd::device::RECV_MODE_ONE_PACKET, timeout + ); + + //use a small timeout for subsequent packets + timeout = 0.1; + + //handle the error code + if (md.error_code == uhd::rx_metadata_t::ERROR_CODE_TIMEOUT) break; + if (md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE){ + throw std::runtime_error(str(boost::format( + "Unexpected error code 0x%x" + ) % md.error_code)); + } + + if(verbose) std::cout << boost::format( + "Received packet: %u samples, %u full secs, %f frac secs" + ) % num_rx_samps % md.time_spec.get_full_secs() % md.time_spec.get_frac_secs() << std::endl; + + num_acc_samps += num_rx_samps; + } + + if (num_acc_samps < total_num_samps) std::cerr << "Receive timeout before all samples received..." << std::endl; + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/rx_samples_to_file.cpp b/host/examples/rx_samples_to_file.cpp new file mode 100644 index 000000000..d44315701 --- /dev/null +++ b/host/examples/rx_samples_to_file.cpp @@ -0,0 +1,167 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <iostream> +#include <fstream> +#include <csignal> +#include <complex> + +namespace po = boost::program_options; + +static bool stop_signal_called = false; +void sig_int_handler(int){stop_signal_called = true;} + +template<typename samp_type> void recv_to_file( + uhd::usrp::multi_usrp::sptr usrp, + const uhd::io_type_t &io_type, + const std::string &file, + size_t samps_per_buff +){ + uhd::rx_metadata_t md; + std::vector<samp_type> buff(samps_per_buff); + std::ofstream outfile(file.c_str(), std::ofstream::binary); + + while(not stop_signal_called){ + size_t num_rx_samps = usrp->get_device()->recv( + &buff.front(), buff.size(), md, io_type, + uhd::device::RECV_MODE_FULL_BUFF + ); + + if (md.error_code == uhd::rx_metadata_t::ERROR_CODE_TIMEOUT) break; + if (md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE){ + throw std::runtime_error(str(boost::format( + "Unexpected error code 0x%x" + ) % md.error_code)); + } + + outfile.write((const char*)&buff.front(), num_rx_samps*sizeof(samp_type)); + } + + outfile.close(); +} + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args, file, type, ant, subdev; + size_t total_num_samps, spb; + double rate, freq, gain, bw; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "multi uhd device address args") + ("file", po::value<std::string>(&file)->default_value("usrp_samples.dat"), "name of the file to write binary samples to") + ("type", po::value<std::string>(&type)->default_value("float"), "sample type: double, float, or short") + ("nsamps", po::value<size_t>(&total_num_samps)->default_value(0), "total number of samples to receive") + ("spb", po::value<size_t>(&spb)->default_value(10000), "samples per buffer") + ("rate", po::value<double>(&rate), "rate of incoming samples") + ("freq", po::value<double>(&freq), "RF center frequency in Hz") + ("gain", po::value<double>(&gain), "gain for the RF chain") + ("ant", po::value<std::string>(&ant), "daughterboard antenna selection") + ("subdev", po::value<std::string>(&subdev), "daughterboard subdevice specification") + ("bw", po::value<double>(&bw), "daughterboard IF filter bandwidth in Hz") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD RX samples to file %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + + //always select the subdevice first, the channel mapping affects the other settings + if (vm.count("subdev")) usrp->set_rx_subdev_spec(subdev); + + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the sample rate + if (not vm.count("rate")){ + std::cerr << "Please specify the sample rate with --rate" << std::endl; + return ~0; + } + std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl << std::endl; + + //set the center frequency + if (not vm.count("freq")){ + std::cerr << "Please specify the center frequency with --freq" << std::endl; + return ~0; + } + std::cout << boost::format("Setting RX Freq: %f MHz...") % (freq/1e6) << std::endl; + usrp->set_rx_freq(freq); + std::cout << boost::format("Actual RX Freq: %f MHz...") % (usrp->get_rx_freq()/1e6) << std::endl << std::endl; + + //set the rf gain + if (vm.count("gain")){ + std::cout << boost::format("Setting RX Gain: %f dB...") % gain << std::endl; + usrp->set_rx_gain(gain); + std::cout << boost::format("Actual RX Gain: %f dB...") % usrp->get_rx_gain() << std::endl << std::endl; + } + + //set the IF filter bandwidth + if (vm.count("bw")){ + std::cout << boost::format("Setting RX Bandwidth: %f MHz...") % bw << std::endl; + usrp->set_rx_bandwidth(bw); + std::cout << boost::format("Actual RX Bandwidth: %f MHz...") % usrp->get_rx_bandwidth() << std::endl << std::endl; + } + + //set the antenna + if (vm.count("ant")) usrp->set_rx_antenna(ant); + + boost::this_thread::sleep(boost::posix_time::seconds(1)); //allow for some setup time + + //setup streaming + uhd::stream_cmd_t stream_cmd((total_num_samps == 0)? + uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS: + uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE + ); + stream_cmd.num_samps = total_num_samps; + stream_cmd.stream_now = true; + usrp->issue_stream_cmd(stream_cmd); + if (total_num_samps == 0){ + std::signal(SIGINT, &sig_int_handler); + std::cout << "Press Ctrl + C to stop streaming..." << std::endl; + } + + //recv to file + if (type == "double") recv_to_file<std::complex<double> >(usrp, uhd::io_type_t::COMPLEX_FLOAT64, file, spb); + else if (type == "float") recv_to_file<std::complex<float> >(usrp, uhd::io_type_t::COMPLEX_FLOAT32, file, spb); + else if (type == "short") recv_to_file<std::complex<short> >(usrp, uhd::io_type_t::COMPLEX_INT16, file, spb); + else throw std::runtime_error("Unknown type " + type); + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/rx_samples_to_udp.cpp b/host/examples/rx_samples_to_udp.cpp new file mode 100644 index 000000000..7ea775764 --- /dev/null +++ b/host/examples/rx_samples_to_udp.cpp @@ -0,0 +1,132 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <uhd/transport/udp_simple.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + size_t total_num_samps; + double rate, freq, gain; + std::string addr, port; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "multi uhd device address args") + ("nsamps", po::value<size_t>(&total_num_samps)->default_value(1000), "total number of samples to receive") + ("rate", po::value<double>(&rate)->default_value(100e6/16), "rate of incoming samples") + ("freq", po::value<double>(&freq)->default_value(0), "rf center frequency in Hz") + ("gain", po::value<double>(&gain)->default_value(0), "gain for the RF chain") + ("port", po::value<std::string>(&port)->default_value("7124"), "server udp port") + ("addr", po::value<std::string>(&addr)->default_value("192.168.1.10"), "resolvable server address") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD RX to UDP %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the rx sample rate + std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl << std::endl; + + //set the rx center frequency + std::cout << boost::format("Setting RX Freq: %f Mhz...") % (freq/1e6) << std::endl; + usrp->set_rx_freq(freq); + std::cout << boost::format("Actual RX Freq: %f Mhz...") % (usrp->get_rx_freq()/1e6) << std::endl << std::endl; + + //set the rx rf gain + std::cout << boost::format("Setting RX Gain: %f dB...") % gain << std::endl; + usrp->set_rx_gain(gain); + std::cout << boost::format("Actual RX Gain: %f dB...") % usrp->get_rx_gain() << std::endl << std::endl; + + boost::this_thread::sleep(boost::posix_time::seconds(1)); //allow for some setup time + + //setup streaming + uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); + stream_cmd.num_samps = total_num_samps; + stream_cmd.stream_now = true; + usrp->issue_stream_cmd(stream_cmd); + + //loop until total number of samples reached + size_t num_acc_samps = 0; //number of accumulated samples + uhd::rx_metadata_t md; + std::vector<std::complex<float> > buff(usrp->get_device()->get_max_recv_samps_per_packet()); + uhd::transport::udp_simple::sptr udp_xport = uhd::transport::udp_simple::make_connected(addr, port); + + while(num_acc_samps < total_num_samps){ + size_t num_rx_samps = usrp->get_device()->recv( + &buff.front(), buff.size(), md, + uhd::io_type_t::COMPLEX_FLOAT32, + uhd::device::RECV_MODE_ONE_PACKET + ); + + //handle the error codes + switch(md.error_code){ + case uhd::rx_metadata_t::ERROR_CODE_NONE: + break; + + case uhd::rx_metadata_t::ERROR_CODE_TIMEOUT: + if (num_acc_samps == 0) continue; + std::cout << boost::format( + "Got timeout before all samples received, possible packet loss, exiting loop..." + ) << std::endl; + goto done_loop; + + default: + std::cout << boost::format( + "Got error code 0x%x, exiting loop..." + ) % md.error_code << std::endl; + goto done_loop; + } + + //send complex single precision floating point samples over udp + udp_xport->send(boost::asio::buffer(buff, num_rx_samps)); + + num_acc_samps += num_rx_samps; + } done_loop: + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/rx_timed_samples.cpp b/host/examples/rx_timed_samples.cpp new file mode 100644 index 000000000..28d7ee466 --- /dev/null +++ b/host/examples/rx_timed_samples.cpp @@ -0,0 +1,133 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + double seconds_in_future; + size_t total_num_samps; + double rate, clock; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ("secs", po::value<double>(&seconds_in_future)->default_value(1.5), "number of seconds in the future to receive") + ("nsamps", po::value<size_t>(&total_num_samps)->default_value(10000), "total number of samples to receive") + ("clock", po::value<double>(&clock), "master clock frequency in Hz") + ("rate", po::value<double>(&rate)->default_value(100e6/16), "rate of incoming samples") + ("dilv", "specify to disable inner-loop verbose") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD RX Timed Samples %s") % desc << std::endl; + return ~0; + } + + bool verbose = vm.count("dilv") == 0; + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //optionally set the clock rate (do before setting anything else) + if (vm.count("clock")){ + std::cout << boost::format("Setting master clock rate: %f MHz...") % (clock/1e6) << std::endl; + usrp->set_master_clock_rate(clock); + } + + //set the rx sample rate + std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl << std::endl; + + std::cout << boost::format("Setting device timestamp to 0...") << std::endl; + usrp->set_time_now(uhd::time_spec_t(0.0)); + + //setup streaming + std::cout << std::endl; + std::cout << boost::format( + "Begin streaming %u samples, %f seconds in the future..." + ) % total_num_samps % seconds_in_future << std::endl; + uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); + stream_cmd.num_samps = total_num_samps; + stream_cmd.stream_now = false; + stream_cmd.time_spec = uhd::time_spec_t(seconds_in_future); + usrp->issue_stream_cmd(stream_cmd); + + //meta-data will be filled in by recv() + uhd::rx_metadata_t md; + + //allocate buffer to receive with samples + std::vector<std::complex<float> > buff(usrp->get_device()->get_max_recv_samps_per_packet()); + + //the first call to recv() will block this many seconds before receiving + double timeout = seconds_in_future + 0.1; //timeout (delay before receive + padding) + + size_t num_acc_samps = 0; //number of accumulated samples + while(num_acc_samps < total_num_samps){ + //receive a single packet + size_t num_rx_samps = usrp->get_device()->recv( + &buff.front(), buff.size(), md, + uhd::io_type_t::COMPLEX_FLOAT32, + uhd::device::RECV_MODE_ONE_PACKET, timeout + ); + + //use a small timeout for subsequent packets + timeout = 0.1; + + //handle the error code + if (md.error_code == uhd::rx_metadata_t::ERROR_CODE_TIMEOUT) break; + if (md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE){ + throw std::runtime_error(str(boost::format( + "Unexpected error code 0x%x" + ) % md.error_code)); + } + + if(verbose) std::cout << boost::format( + "Received packet: %u samples, %u full secs, %f frac secs" + ) % num_rx_samps % md.time_spec.get_full_secs() % md.time_spec.get_frac_secs() << std::endl; + + num_acc_samps += num_rx_samps; + } + + if (num_acc_samps < total_num_samps) std::cerr << "Receive timeout before all samples received..." << std::endl; + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/test_async_messages.cpp b/host/examples/test_async_messages.cpp new file mode 100644 index 000000000..7f922ed35 --- /dev/null +++ b/host/examples/test_async_messages.cpp @@ -0,0 +1,254 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/program_options.hpp> +#include <boost/foreach.hpp> +#include <boost/bind.hpp> +#include <boost/format.hpp> +#include <cstdlib> +#include <complex> +#include <iostream> + +namespace po = boost::program_options; + +/*! + * Test the burst ack message: + * Send a burst of many samples that will fragment internally. + * We expect to get an burst ack async message. + */ +bool test_burst_ack_message(uhd::usrp::multi_usrp::sptr usrp){ + std::cout << "Test burst ack message... " << std::flush; + + uhd::tx_metadata_t md; + md.start_of_burst = true; + md.end_of_burst = true; + md.has_time_spec = false; + + //3 times max-sps guarantees a SOB, no burst, and EOB packet + std::vector<std::complex<float> > buff(usrp->get_device()->get_max_send_samps_per_packet()*3); + + usrp->get_device()->send( + &buff.front(), buff.size(), md, + uhd::io_type_t::COMPLEX_FLOAT32, + uhd::device::SEND_MODE_FULL_BUFF + ); + + uhd::async_metadata_t async_md; + if (not usrp->get_device()->recv_async_msg(async_md)){ + std::cout << boost::format( + "failed:\n" + " Async message recv timed out.\n" + ) << std::endl; + return false; + } + + switch(async_md.event_code){ + case uhd::async_metadata_t::EVENT_CODE_BURST_ACK: + std::cout << boost::format( + "success:\n" + " Got event code burst ack message.\n" + ) << std::endl; + return true; + + default: + std::cout << boost::format( + "failed:\n" + " Got unexpected event code 0x%x.\n" + ) % async_md.event_code << std::endl; + return false; + } +} + +/*! + * Test the underflow message: + * Send a start of burst packet with no following end of burst. + * We expect to get an underflow(within a burst) async message. + */ +bool test_underflow_message(uhd::usrp::multi_usrp::sptr usrp){ + std::cout << "Test underflow message... " << std::flush; + + uhd::tx_metadata_t md; + md.start_of_burst = true; + md.end_of_burst = false; + md.has_time_spec = false; + + usrp->get_device()->send("", 0, md, + uhd::io_type_t::COMPLEX_FLOAT32, + uhd::device::SEND_MODE_FULL_BUFF + ); + + uhd::async_metadata_t async_md; + if (not usrp->get_device()->recv_async_msg(async_md, 1)){ + std::cout << boost::format( + "failed:\n" + " Async message recv timed out.\n" + ) << std::endl; + return false; + } + + switch(async_md.event_code){ + case uhd::async_metadata_t::EVENT_CODE_UNDERFLOW: + std::cout << boost::format( + "success:\n" + " Got event code underflow message.\n" + ) << std::endl; + return true; + + default: + std::cout << boost::format( + "failed:\n" + " Got unexpected event code 0x%x.\n" + ) % async_md.event_code << std::endl; + return false; + } +} + +/*! + * Test the time error message: + * Send a burst packet that occurs at a time in the past. + * We expect to get a time error async message. + */ +bool test_time_error_message(uhd::usrp::multi_usrp::sptr usrp){ + std::cout << "Test time error message... " << std::flush; + + uhd::tx_metadata_t md; + md.start_of_burst = true; + md.end_of_burst = true; + md.has_time_spec = true; + md.time_spec = uhd::time_spec_t(100.0); //send at 100s + + usrp->set_time_now(uhd::time_spec_t(200.0)); //time at 200s + + usrp->get_device()->send("", 0, md, + uhd::io_type_t::COMPLEX_FLOAT32, + uhd::device::SEND_MODE_FULL_BUFF + ); + + uhd::async_metadata_t async_md; + if (not usrp->get_device()->recv_async_msg(async_md)){ + std::cout << boost::format( + "failed:\n" + " Async message recv timed out.\n" + ) << std::endl; + return false; + } + + switch(async_md.event_code){ + case uhd::async_metadata_t::EVENT_CODE_TIME_ERROR: + std::cout << boost::format( + "success:\n" + " Got event code time error message.\n" + ) << std::endl; + return true; + + default: + std::cout << boost::format( + "failed:\n" + " Got unexpected event code 0x%x.\n" + ) % async_md.event_code << std::endl; + return false; + } +} + +void flush_async_md(uhd::usrp::multi_usrp::sptr usrp){ + uhd::async_metadata_t async_md; + while (usrp->get_device()->recv_async_msg(async_md, 1.0)){} +} + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + double rate; + size_t ntests; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "multi uhd device address args") + ("rate", po::value<double>(&rate)->default_value(1.5e6), "rate of outgoing samples") + ("ntests", po::value<size_t>(&ntests)->default_value(10), "number of tests to run") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD Test Async Messages %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the tx sample rate + std::cout << boost::format("Setting TX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_tx_rate(rate); + std::cout << boost::format("Actual TX Rate: %f Msps...") % (usrp->get_tx_rate()/1e6) << std::endl << std::endl; + + //------------------------------------------------------------------ + // begin asyc messages test + //------------------------------------------------------------------ + static const uhd::dict<std::string, boost::function<bool(uhd::usrp::multi_usrp::sptr)> > + tests = boost::assign::map_list_of + ("Test Burst ACK ", &test_burst_ack_message) + ("Test Underflow ", &test_underflow_message) + ("Test Time Error", &test_time_error_message) + ; + + //init result counts + uhd::dict<std::string, size_t> failures, successes; + BOOST_FOREACH(const std::string &key, tests.keys()){ + failures[key] = 0; + successes[key] = 0; + } + + //run the tests, pick at random + for (size_t n = 0; n < ntests; n++){ + std::string key = tests.keys()[std::rand() % tests.size()]; + bool pass = tests[key](usrp); + flush_async_md(usrp); + + //store result + if (pass) successes[key]++; + else failures[key]++; + } + + //print the result summary + std::cout << std::endl << "Summary:" << std::endl << std::endl; + BOOST_FOREACH(const std::string &key, tests.keys()){ + std::cout << boost::format( + "%s -> %3d successes, %3d failures" + ) % key % successes[key] % failures[key] << std::endl; + } + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/test_pps_input.cpp b/host/examples/test_pps_input.cpp new file mode 100644 index 000000000..994b7ca87 --- /dev/null +++ b/host/examples/test_pps_input.cpp @@ -0,0 +1,62 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD Test PPS Input %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the time at an unknown pps (will throw if no pps) + std::cout << std::endl << "Attempt to detect the PPS and set the time..." << std::endl << std::endl; + usrp->set_time_unknown_pps(uhd::time_spec_t(0.0)); + std::cout << std::endl << "Success!" << std::endl << std::endl; + return 0; +} diff --git a/host/examples/tx_samples_from_file.cpp b/host/examples/tx_samples_from_file.cpp new file mode 100644 index 000000000..acf899fa9 --- /dev/null +++ b/host/examples/tx_samples_from_file.cpp @@ -0,0 +1,149 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <iostream> +#include <fstream> +#include <complex> + +namespace po = boost::program_options; + +template<typename samp_type> void send_from_file( + uhd::usrp::multi_usrp::sptr usrp, + const uhd::io_type_t &io_type, + const std::string &file, + size_t samps_per_buff +){ + uhd::tx_metadata_t md; + md.start_of_burst = false; + md.end_of_burst = false; + std::vector<samp_type> buff(samps_per_buff); + std::ifstream infile(file.c_str(), std::ifstream::binary); + + //loop until the entire file has been read + while(not md.end_of_burst){ + + infile.read((char*)&buff.front(), buff.size()*sizeof(samp_type)); + size_t num_tx_samps = infile.gcount()/sizeof(samp_type); + + md.end_of_burst = infile.eof(); + + usrp->get_device()->send( + &buff.front(), num_tx_samps, md, io_type, + uhd::device::SEND_MODE_FULL_BUFF + ); + } + + infile.close(); +} + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args, file, type, ant, subdev; + size_t spb; + double rate, freq, gain, bw; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "multi uhd device address args") + ("file", po::value<std::string>(&file)->default_value("usrp_samples.dat"), "name of the file to read binary samples from") + ("type", po::value<std::string>(&type)->default_value("float"), "sample type: double, float, or short") + ("spb", po::value<size_t>(&spb)->default_value(10000), "samples per buffer") + ("rate", po::value<double>(&rate), "rate of outgoing samples") + ("freq", po::value<double>(&freq), "RF center frequency in Hz") + ("gain", po::value<double>(&gain), "gain for the RF chain") + ("ant", po::value<std::string>(&ant), "daughterboard antenna selection") + ("subdev", po::value<std::string>(&subdev), "daughterboard subdevice specification") + ("bw", po::value<double>(&bw), "daughterboard IF filter bandwidth in Hz") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD TX samples from file %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + + //always select the subdevice first, the channel mapping affects the other settings + if (vm.count("subdev")) usrp->set_tx_subdev_spec(subdev); + + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the sample rate + if (not vm.count("rate")){ + std::cerr << "Please specify the sample rate with --rate" << std::endl; + return ~0; + } + std::cout << boost::format("Setting TX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_tx_rate(rate); + std::cout << boost::format("Actual TX Rate: %f Msps...") % (usrp->get_tx_rate()/1e6) << std::endl << std::endl; + + //set the center frequency + if (not vm.count("freq")){ + std::cerr << "Please specify the center frequency with --freq" << std::endl; + return ~0; + } + std::cout << boost::format("Setting TX Freq: %f MHz...") % (freq/1e6) << std::endl; + usrp->set_tx_freq(freq); + std::cout << boost::format("Actual TX Freq: %f MHz...") % (usrp->get_tx_freq()/1e6) << std::endl << std::endl; + + //set the rf gain + if (vm.count("gain")){ + std::cout << boost::format("Setting TX Gain: %f dB...") % gain << std::endl; + usrp->set_tx_gain(gain); + std::cout << boost::format("Actual TX Gain: %f dB...") % usrp->get_tx_gain() << std::endl << std::endl; + } + + //set the IF filter bandwidth + if (vm.count("bw")){ + std::cout << boost::format("Setting TX Bandwidth: %f MHz...") % bw << std::endl; + usrp->set_tx_bandwidth(bw); + std::cout << boost::format("Actual TX Bandwidth: %f MHz...") % usrp->get_tx_bandwidth() << std::endl << std::endl; + } + + //set the antenna + if (vm.count("ant")) usrp->set_tx_antenna(ant); + + boost::this_thread::sleep(boost::posix_time::seconds(1)); //allow for some setup time + + //send from file + if (type == "double") send_from_file<std::complex<double> >(usrp, uhd::io_type_t::COMPLEX_FLOAT64, file, spb); + else if (type == "float") send_from_file<std::complex<float> >(usrp, uhd::io_type_t::COMPLEX_FLOAT32, file, spb); + else if (type == "short") send_from_file<std::complex<short> >(usrp, uhd::io_type_t::COMPLEX_INT16, file, spb); + else throw std::runtime_error("Unknown type " + type); + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/tx_timed_samples.cpp b/host/examples/tx_timed_samples.cpp new file mode 100644 index 000000000..03f87122d --- /dev/null +++ b/host/examples/tx_timed_samples.cpp @@ -0,0 +1,128 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/thread/thread.hpp> +#include <boost/format.hpp> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + double seconds_in_future; + size_t total_num_samps; + double rate; + float ampl; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ("secs", po::value<double>(&seconds_in_future)->default_value(1.5), "number of seconds in the future to transmit") + ("nsamps", po::value<size_t>(&total_num_samps)->default_value(10000), "total number of samples to transmit") + ("rate", po::value<double>(&rate)->default_value(100e6/16), "rate of outgoing samples") + ("ampl", po::value<float>(&l)->default_value(float(0.3)), "amplitude of each sample") + ("dilv", "specify to disable inner-loop verbose") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD TX Timed Samples %s") % desc << std::endl; + return ~0; + } + + bool verbose = vm.count("dilv") == 0; + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the tx sample rate + std::cout << boost::format("Setting TX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_tx_rate(rate); + std::cout << boost::format("Actual TX Rate: %f Msps...") % (usrp->get_tx_rate()/1e6) << std::endl << std::endl; + + std::cout << boost::format("Setting device timestamp to 0...") << std::endl; + usrp->set_time_now(uhd::time_spec_t(0.0)); + + //allocate buffer with data to send + std::vector<std::complex<float> > buff(usrp->get_device()->get_max_send_samps_per_packet(), std::complex<float>(ampl, ampl)); + + //setup metadata for the first packet + uhd::tx_metadata_t md; + md.start_of_burst = false; + md.end_of_burst = false; + md.has_time_spec = true; + md.time_spec = uhd::time_spec_t(seconds_in_future); + + //the first call to send() will block this many seconds before sending: + double timeout = seconds_in_future + 0.1; //timeout (delay before transmit + padding) + + size_t num_acc_samps = 0; //number of accumulated samples + while(num_acc_samps < total_num_samps){ + size_t samps_to_send = std::min(total_num_samps - num_acc_samps, buff.size()); + + //ensure the the last packet has EOB set + md.end_of_burst = samps_to_send <= buff.size(); + + //send a single packet + size_t num_tx_samps = usrp->get_device()->send( + &buff.front(), samps_to_send, md, + uhd::io_type_t::COMPLEX_FLOAT32, + uhd::device::SEND_MODE_ONE_PACKET, timeout + ); + + //use a small timeout for subsequent packets + timeout = 0.1; + + //do not use time spec for subsequent packets + md.has_time_spec = false; + + if (num_tx_samps < samps_to_send) std::cerr << "Send timeout..." << std::endl; + if(verbose) std::cout << boost::format("Sent packet: %u samples") % num_tx_samps << std::endl; + + num_acc_samps += num_tx_samps; + } + + std::cout << std::endl << "Waiting for async burst ACK... " << std::flush; + uhd::async_metadata_t async_md; + bool got_async_burst_ack = false; + //loop through all messages for the ACK packet (may have underflow messages in queue) + while (not got_async_burst_ack and usrp->get_device()->recv_async_msg(async_md, seconds_in_future)){ + got_async_burst_ack = (async_md.event_code == uhd::async_metadata_t::EVENT_CODE_BURST_ACK); + } + std::cout << (got_async_burst_ack? "success" : "fail") << std::endl; + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/tx_waveforms.cpp b/host/examples/tx_waveforms.cpp new file mode 100644 index 000000000..9c45e918b --- /dev/null +++ b/host/examples/tx_waveforms.cpp @@ -0,0 +1,211 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/math/special_functions/round.hpp> +#include <boost/format.hpp> +#include <boost/function.hpp> +#include <iostream> +#include <complex> +#include <csignal> +#include <cmath> + +namespace po = boost::program_options; + +static bool stop_signal_called = false; +void sig_int_handler(int){stop_signal_called = true;} + +/*********************************************************************** + * Waveform generators + **********************************************************************/ +float gen_const(float){ + return 1; +} + +float gen_square(float x){ + return float((std::fmod(x, 1) < float(0.5))? 0 : 1); +} + +float gen_ramp(float x){ + return std::fmod(x, 1)*2 - 1; +} + +#define sine_table_len 2048 +static float sine_table[sine_table_len]; +UHD_STATIC_BLOCK(gen_sine_table){ + static const double tau = 2*std::acos(-1.0); + for (size_t i = 0; i < sine_table_len; i++) + sine_table[i] = float(std::sin((tau*i)/sine_table_len)); +} + +float gen_sine(float x){ + return sine_table[size_t(x*sine_table_len)%sine_table_len]; +} + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args, wave_type, ant, subdev; + size_t spb; + double rate, freq, gain, wave_freq, bw; + float ampl; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ("spb", po::value<size_t>(&spb)->default_value(10000), "samples per buffer") + ("rate", po::value<double>(&rate), "rate of outgoing samples") + ("freq", po::value<double>(&freq), "RF center frequency in Hz") + ("ampl", po::value<float>(&l)->default_value(float(0.3)), "amplitude of the waveform") + ("gain", po::value<double>(&gain), "gain for the RF chain") + ("ant", po::value<std::string>(&ant), "daughterboard antenna selection") + ("subdev", po::value<std::string>(&subdev), "daughterboard subdevice specification") + ("bw", po::value<double>(&bw), "daughterboard IF filter bandwidth in Hz") + ("wave-type", po::value<std::string>(&wave_type)->default_value("CONST"), "waveform type (CONST, SQUARE, RAMP, SINE)") + ("wave-freq", po::value<double>(&wave_freq)->default_value(0), "waveform frequency in Hz") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD TX Waveforms %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + + //always select the subdevice first, the channel mapping affects the other settings + if (vm.count("subdev")) usrp->set_tx_subdev_spec(subdev); + + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the sample rate + if (not vm.count("rate")){ + std::cerr << "Please specify the sample rate with --rate" << std::endl; + return ~0; + } + std::cout << boost::format("Setting TX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_tx_rate(rate); + std::cout << boost::format("Actual TX Rate: %f Msps...") % (usrp->get_tx_rate()/1e6) << std::endl << std::endl; + + //set the center frequency + if (not vm.count("freq")){ + std::cerr << "Please specify the center frequency with --freq" << std::endl; + return ~0; + } + std::cout << boost::format("Setting TX Freq: %f MHz...") % (freq/1e6) << std::endl; + usrp->set_tx_freq(freq); + std::cout << boost::format("Actual TX Freq: %f MHz...") % (usrp->get_tx_freq()/1e6) << std::endl << std::endl; + + //set the rf gain + if (vm.count("gain")){ + std::cout << boost::format("Setting TX Gain: %f dB...") % gain << std::endl; + usrp->set_tx_gain(gain); + std::cout << boost::format("Actual TX Gain: %f dB...") % usrp->get_tx_gain() << std::endl << std::endl; + } + + //set the IF filter bandwidth + if (vm.count("bw")){ + std::cout << boost::format("Setting TX Bandwidth: %f MHz...") % bw << std::endl; + usrp->set_tx_bandwidth(bw); + std::cout << boost::format("Actual TX Bandwidth: %f MHz...") % usrp->get_tx_bandwidth() << std::endl << std::endl; + } + + //for the const wave, set the wave freq for small samples per period + if (wave_freq == 0 and wave_type == "CONST"){ + wave_freq = usrp->get_tx_rate()/2; + } + + //error when the waveform is not possible to generate + if (std::abs(wave_freq) > usrp->get_tx_rate()/2){ + throw std::runtime_error("wave freq out of Nyquist zone"); + } + if (usrp->get_tx_rate()/std::abs(wave_freq) > sine_table_len/2 and wave_type == "SINE"){ + throw std::runtime_error("sine freq too small for table"); + } + + //store the generator function for the selected waveform + boost::function<float(float)> wave_gen; + if (wave_type == "CONST") wave_gen = &gen_const; + else if (wave_type == "SQUARE") wave_gen = &gen_square; + else if (wave_type == "RAMP") wave_gen = &gen_ramp; + else if (wave_type == "SINE") wave_gen = &gen_sine; + else throw std::runtime_error("unknown waveform type: " + wave_type); + + //allocate the buffer and precalculate values + std::vector<std::complex<float> > buff(spb); + const float cps = float(wave_freq/usrp->get_tx_rate()); + const float i_off = (wave_freq > 0)? float(0.25) : 0; + const float q_off = (wave_freq < 0)? float(0.25) : 0; + float theta = 0; + + //setup the metadata flags + uhd::tx_metadata_t md; + md.start_of_burst = false; //never SOB when continuous + md.end_of_burst = false; + + std::signal(SIGINT, &sig_int_handler); + std::cout << "Press Ctrl + C to stop streaming..." << std::endl; + + //send data until the signal handler gets called + while(not stop_signal_called){ + + //fill the buffer with the waveform + for (size_t n = 0; n < buff.size(); n++){ + buff[n] = std::complex<float>( + ampl*wave_gen(i_off + theta), + ampl*wave_gen(q_off + theta) + ); + theta += cps; + } + + //bring the theta back into range [0, 1) + theta = std::fmod(theta, 1); + + //send the entire contents of the buffer + usrp->get_device()->send( + &buff.front(), buff.size(), md, + uhd::io_type_t::COMPLEX_FLOAT32, + uhd::device::SEND_MODE_FULL_BUFF + ); + } + + //send a mini EOB packet + md.start_of_burst = false; + md.end_of_burst = true; + usrp->get_device()->send("", 0, md, + uhd::io_type_t::COMPLEX_FLOAT32, + uhd::device::SEND_MODE_FULL_BUFF + ); + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/include/CMakeLists.txt b/host/include/CMakeLists.txt new file mode 100644 index 000000000..3f7ca2cb7 --- /dev/null +++ b/host/include/CMakeLists.txt @@ -0,0 +1,19 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + + +ADD_SUBDIRECTORY(uhd) diff --git a/host/include/uhd/CMakeLists.txt b/host/include/uhd/CMakeLists.txt new file mode 100644 index 000000000..db755511e --- /dev/null +++ b/host/include/uhd/CMakeLists.txt @@ -0,0 +1,32 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + + +ADD_SUBDIRECTORY(transport) +ADD_SUBDIRECTORY(types) +ADD_SUBDIRECTORY(usrp) +ADD_SUBDIRECTORY(utils) + +INSTALL(FILES + config.hpp + convert.hpp + device.hpp + exception.hpp + version.hpp + wax.hpp + DESTINATION ${INCLUDE_DIR}/uhd +) diff --git a/host/include/uhd/config.hpp b/host/include/uhd/config.hpp new file mode 100644 index 000000000..1a04680e9 --- /dev/null +++ b/host/include/uhd/config.hpp @@ -0,0 +1,92 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_CONFIG_HPP +#define INCLUDED_UHD_CONFIG_HPP + +#include <boost/config.hpp> + +#ifdef BOOST_MSVC +// suppress warnings +//# pragma warning(push) +//# pragma warning(disable: 4511) // copy constructor can't not be generated +//# pragma warning(disable: 4512) // assignment operator can't not be generated +//# pragma warning(disable: 4100) // unreferenced formal parameter +//# pragma warning(disable: 4996) // <symbol> was declared deprecated +# pragma warning(disable: 4355) // 'this' : used in base member initializer list +//# pragma warning(disable: 4706) // assignment within conditional expression +# pragma warning(disable: 4251) // class 'A<T>' needs to have dll-interface to be used by clients of class 'B' +//# pragma warning(disable: 4127) // conditional expression is constant +//# pragma warning(disable: 4290) // C++ exception specification ignored except to ... +//# pragma warning(disable: 4180) // qualifier applied to function type has no meaning; ignored +# pragma warning(disable: 4275) // non dll-interface class ... used as base for dll-interface class ... +//# pragma warning(disable: 4267) // 'var' : conversion from 'size_t' to 'type', possible loss of data +//# pragma warning(disable: 4511) // 'class' : copy constructor could not be generated +//# pragma warning(disable: 4250) // 'class' : inherits 'method' via dominance +# pragma warning(disable: 4200) // nonstandard extension used : zero-sized array in struct/union + +// define logical operators +#include <ciso646> + +// define ssize_t +#include <cstddef> +typedef ptrdiff_t ssize_t; + +#endif //BOOST_MSVC + +//define cross platform attribute macros +#if defined(BOOST_MSVC) || defined(BOOST_HAS_DECLSPEC) + #define UHD_EXPORT __declspec(dllexport) + #define UHD_IMPORT __declspec(dllimport) + #define UHD_INLINE __forceinline + #define UHD_DEPRECATED __declspec(deprecated) + #define UHD_ALIGNED(x) __declspec(align(x)) +#elif defined(__GNUG__) && __GNUG__ >= 4 + #define UHD_EXPORT __attribute__((visibility("default"))) + #define UHD_IMPORT __attribute__((visibility("default"))) + #define UHD_INLINE inline __attribute__((always_inline)) + #define UHD_DEPRECATED __attribute__((deprecated)) + #define UHD_ALIGNED(x) __attribute__((aligned(x))) +#else + #define UHD_EXPORT + #define UHD_IMPORT + #define UHD_INLINE inline + #define UHD_DEPRECATED + #define UHD_ALIGNED(x) +#endif + +// Define API declaration macro +#ifdef UHD_DLL_EXPORTS + #define UHD_API UHD_EXPORT +#else + #define UHD_API UHD_IMPORT +#endif // UHD_DLL_EXPORTS + +// Platform defines for conditional parts of headers: +// Taken from boost/config/select_platform_config.hpp, +// however, we define macros, not strings for platforms. +#if defined(linux) || defined(__linux) || defined(__linux__) + #define UHD_PLATFORM_LINUX +#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32) + #define UHD_PLATFORM_WIN32 +#elif defined(macintosh) || defined(__APPLE__) || defined(__APPLE_CC__) + #define UHD_PLATFORM_MACOS +#elif defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) + #define UHD_PLATFORM_BSD +#endif + +#endif /* INCLUDED_UHD_CONFIG_HPP */ diff --git a/host/include/uhd/convert.hpp b/host/include/uhd/convert.hpp new file mode 100644 index 000000000..8fc2f38db --- /dev/null +++ b/host/include/uhd/convert.hpp @@ -0,0 +1,90 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_CONVERT_HPP +#define INCLUDED_UHD_CONVERT_HPP + +#include <uhd/config.hpp> +#include <uhd/types/io_type.hpp> +#include <uhd/types/otw_type.hpp> +#include <uhd/types/ref_vector.hpp> +#include <boost/function.hpp> +#include <string> + +namespace uhd{ namespace convert{ + + typedef uhd::ref_vector<void *> output_type; + typedef uhd::ref_vector<const void *> input_type; + typedef boost::function<void(const input_type&, const output_type&, size_t)> function_type; + + /*! + * Describe the priority of a converter function. + * A higher priority function takes precedence. + * The general case function are the lowest. + * Next comes the liborc implementations. + * Custom intrinsics implementations are highest. + */ + enum priority_type{ + PRIORITY_GENERAL = 0, + PRIORITY_LIBORC = 1, + PRIORITY_CUSTOM = 2, + PRIORITY_EMPTY = -1, + }; + + /*! + * Register a converter function that converts cpu type to/from otw type. + * \param markup representing the signature + * \param fcn a pointer to the converter + * \param prio the function priority + */ + UHD_API void register_converter( + const std::string &markup, + function_type fcn, + priority_type prio + ); + + /*! + * Get a converter function that converts cpu to otw. + * \param io_type the type of the input samples + * \param otw_type the type of the output samples + * \param num_input_buffs the number of inputs + * \param num_output_buffs the number of outputs + */ + UHD_API const function_type &get_converter_cpu_to_otw( + const io_type_t &io_type, + const otw_type_t &otw_type, + size_t num_input_buffs, + size_t num_output_buffs + ); + + /*! + * Get a converter function that converts otw to cpu. + * \param io_type the type of the input samples + * \param otw_type the type of the output samples + * \param num_input_buffs the number of inputs + * \param num_output_buffs the number of outputs + */ + UHD_API const function_type &get_converter_otw_to_cpu( + const io_type_t &io_type, + const otw_type_t &otw_type, + size_t num_input_buffs, + size_t num_output_buffs + ); + +}} //namespace + +#endif /* INCLUDED_UHD_CONVERT_HPP */ diff --git a/host/include/uhd/device.hpp b/host/include/uhd/device.hpp new file mode 100644 index 000000000..50237472b --- /dev/null +++ b/host/include/uhd/device.hpp @@ -0,0 +1,204 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_DEVICE_HPP +#define INCLUDED_UHD_DEVICE_HPP + +#include <uhd/config.hpp> +#include <uhd/types/device_addr.hpp> +#include <uhd/types/metadata.hpp> +#include <uhd/types/io_type.hpp> +#include <uhd/types/ref_vector.hpp> +#include <uhd/wax.hpp> +#include <boost/utility.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/function.hpp> + +namespace uhd{ + +/*! + * The usrp device interface represents the usrp hardware. + * The api allows for discovery, configuration, and streaming. + */ +class UHD_API device : boost::noncopyable, public wax::obj{ + +public: + typedef boost::shared_ptr<device> sptr; + typedef boost::function<device_addrs_t(const device_addr_t &)> find_t; + typedef boost::function<sptr(const device_addr_t &)> make_t; + + /*! + * Register a device into the discovery and factory system. + * + * \param find a function that discovers devices + * \param make a factory function that makes a device + */ + static void register_device( + const find_t &find, + const make_t &make + ); + + /*! + * \brief Find usrp devices attached to the host. + * + * The hint device address should be used to narrow down the search + * to particular transport types and/or transport arguments. + * + * \param hint a partially (or fully) filled in device address + * \return a vector of device addresses for all usrps on the system + */ + static device_addrs_t find(const device_addr_t &hint); + + /*! + * \brief Create a new usrp device from the device address hint. + * + * The make routine will call find and pick one of the results. + * By default, the first result will be used to create a new device. + * Use the which parameter as an index into the list of results. + * + * \param hint a partially (or fully) filled in device address + * \param which which address to use when multiple are found + * \return a shared pointer to a new device instance + */ + static sptr make(const device_addr_t &hint, size_t which = 0); + + /*! + * Send modes for the device send routine. + */ + enum send_mode_t{ + //! Tells the send routine to send the entire buffer + SEND_MODE_FULL_BUFF = 0, + //! Tells the send routine to return after one packet + SEND_MODE_ONE_PACKET = 1 + }; + + /*! + * Recv modes for the device recv routine. + */ + enum recv_mode_t{ + //! Tells the recv routine to recv the entire buffer + RECV_MODE_FULL_BUFF = 0, + //! Tells the recv routine to return after one packet + RECV_MODE_ONE_PACKET = 1 + }; + + //! Typedef for a pointer to a single, or a collection of send buffers + typedef ref_vector<const void *> send_buffs_type; + + //! Typedef for a pointer to a single, or a collection of recv buffers + typedef ref_vector<void *> recv_buffs_type; + + /*! + * Send buffers containing IF data described by the metadata. + * + * Send handles fragmentation as follows: + * If the buffer has more samples than the maximum per packet, + * the send method will fragment the samples across several packets. + * Send will respect the burst flags when fragmenting to ensure + * that start of burst can only be set on the first fragment and + * that end of burst can only be set on the final fragment. + * Fragmentation only applies in the full buffer send mode. + * + * This is a blocking call and will not return until the number + * of samples returned have been read out of each buffer. + * Under a timeout condition, the number of samples returned + * may be less than the number of samples specified. + * + * \param buffs a vector of read-only memory containing IF data + * \param nsamps_per_buff the number of samples to send, per buffer + * \param metadata data describing the buffer's contents + * \param io_type the type of data loaded in the buffer + * \param send_mode tells send how to unload the buffer + * \param timeout the timeout in seconds to wait on a packet + * \return the number of samples sent + */ + virtual size_t send( + const send_buffs_type &buffs, + size_t nsamps_per_buff, + const tx_metadata_t &metadata, + const io_type_t &io_type, + send_mode_t send_mode, + double timeout = 0.1 + ) = 0; + + /*! + * Receive buffers containing IF data described by the metadata. + * + * Receive handles fragmentation as follows: + * If the buffer has insufficient space to hold all samples + * that were received in a single packet over-the-wire, + * then the buffer will be completely filled and the implementation + * will hold a pointer into the remaining portion of the packet. + * Subsequent calls will load from the remainder of the packet, + * and will flag the metadata to show that this is a fragment. + * The next call to receive, after the remainder becomes exahausted, + * will perform an over-the-wire receive as usual. + * See the rx metadata fragment flags and offset fields for details. + * + * This is a blocking call and will not return until the number + * of samples returned have been written into each buffer. + * Under a timeout condition, the number of samples returned + * may be less than the number of samples specified. + * + * When using the full buffer recv mode, the metadata only applies + * to the first packet received and written into the recv buffers. + * Use the one packet recv mode to get per packet metadata. + * + * \param buffs a vector of writable memory to fill with IF data + * \param nsamps_per_buff the size of each buffer in number of samples + * \param metadata data to fill describing the buffer + * \param io_type the type of data to fill into the buffer + * \param recv_mode tells recv how to load the buffer + * \param timeout the timeout in seconds to wait for a packet + * \return the number of samples received or 0 on error + */ + virtual size_t recv( + const recv_buffs_type &buffs, + size_t nsamps_per_buff, + rx_metadata_t &metadata, + const io_type_t &io_type, + recv_mode_t recv_mode, + double timeout = 0.1 + ) = 0; + + /*! + * Get the maximum number of samples per packet on send. + * \return the number of samples + */ + virtual size_t get_max_send_samps_per_packet(void) const = 0; + + /*! + * Get the maximum number of samples per packet on recv. + * \return the number of samples + */ + virtual size_t get_max_recv_samps_per_packet(void) const = 0; + + /*! + * Receive and asynchronous message from the device. + * \param async_metadata the metadata to be filled in + * \param timeout the timeout in seconds to wait for a message + * \return true when the async_metadata is valid, false for timeout + */ + virtual bool recv_async_msg( + async_metadata_t &async_metadata, double timeout = 0.1 + ) = 0; + +}; + +} //namespace uhd + +#endif /* INCLUDED_UHD_DEVICE_HPP */ diff --git a/host/include/uhd/exception.hpp b/host/include/uhd/exception.hpp new file mode 100644 index 000000000..e2a50bf1e --- /dev/null +++ b/host/include/uhd/exception.hpp @@ -0,0 +1,133 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_EXCEPTION_HPP +#define INCLUDED_UHD_UTILS_EXCEPTION_HPP + +#include <uhd/config.hpp> +#include <boost/current_function.hpp> +#include <stdexcept> +#include <string> + +/*! + * Define common exceptions used throughout the code: + * + * - The python built-in exceptions were used as inspiration. + * - Exceptions inherit from std::exception to provide what(). + * - Exceptions inherit from uhd::exception to provide code(). + * + * The code() provides an error code which allows the application + * the option of printing a cryptic error message from the 1990s. + */ +namespace uhd{ + + struct UHD_API exception : std::runtime_error{ + exception(const std::string &what); + virtual unsigned code(void) const = 0; + }; + + struct UHD_API assertion_error : exception{ + assertion_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API lookup_error : exception{ + lookup_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API index_error : lookup_error{ + index_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API key_error : lookup_error{ + key_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API type_error : exception{ + type_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API value_error : exception{ + value_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API runtime_error : exception{ + runtime_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API not_implemented_error : runtime_error{ + not_implemented_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API environment_error : exception{ + environment_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API io_error : environment_error{ + io_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API os_error : environment_error{ + os_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API system_error : exception{ + system_error(const std::string &what); + virtual unsigned code(void) const; + }; + + /*! + * Create a formated string with throw-site information. + * Fills in the function name, file name, and line number. + * \param what the std::exeption message + * \return the formatted exception message + */ + #define UHD_THROW_SITE_INFO(what) std::string( \ + std::string(what) + "\n" + \ + " in " + std::string(BOOST_CURRENT_FUNCTION) + "\n" + \ + " at " + std::string(__FILE__) + ":" + BOOST_STRINGIZE(__LINE__) + "\n" \ + ) + + /*! + * Throws an invalid code path exception with throw-site information. + * Use this macro in places that code execution is not supposed to go. + */ + #define UHD_THROW_INVALID_CODE_PATH() \ + throw uhd::system_error(UHD_THROW_SITE_INFO("invalid code path")) + + /*! + * Assert the result of the code evaluation. + * If the code evaluates to false, throw an assertion error. + * \param code the code that resolved to a boolean + */ + #define UHD_ASSERT_THROW(code) if (not (code)) \ + throw uhd::assertion_error(UHD_THROW_SITE_INFO(#code)); \ + else void(0) + +} //namespace uhd + +#endif /* INCLUDED_UHD_UTILS_EXCEPTION_HPP */ diff --git a/host/include/uhd/transport/CMakeLists.txt b/host/include/uhd/transport/CMakeLists.txt new file mode 100644 index 000000000..14ca82226 --- /dev/null +++ b/host/include/uhd/transport/CMakeLists.txt @@ -0,0 +1,32 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + + +INSTALL(FILES + bounded_buffer.hpp + bounded_buffer.ipp + buffer_pool.hpp + if_addrs.hpp + udp_simple.hpp + udp_zero_copy.hpp + usb_control.hpp + usb_zero_copy.hpp + usb_device_handle.hpp + vrt_if_packet.hpp + zero_copy.hpp + DESTINATION ${INCLUDE_DIR}/uhd/transport +) diff --git a/host/include/uhd/transport/bounded_buffer.hpp b/host/include/uhd/transport/bounded_buffer.hpp new file mode 100644 index 000000000..6aa92c2e6 --- /dev/null +++ b/host/include/uhd/transport/bounded_buffer.hpp @@ -0,0 +1,121 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TRANSPORT_BOUNDED_BUFFER_HPP +#define INCLUDED_UHD_TRANSPORT_BOUNDED_BUFFER_HPP + +#include <uhd/transport/bounded_buffer.ipp> //detail + +namespace uhd{ namespace transport{ + + /*! + * Implement a templated bounded buffer: + * Used for passing elements between threads in a producer-consumer model. + * The bounded buffer implemented waits and timed waits with condition variables. + * The pop operation blocks on the bounded_buffer to become non empty. + * The push operation blocks on the bounded_buffer to become non full. + */ + template <typename elem_type> class bounded_buffer{ + public: + + /*! + * Create a new bounded buffer object. + * \param capacity the bounded_buffer capacity + */ + bounded_buffer(size_t capacity): + _detail(capacity) + { + /* NOP */ + } + + /*! + * Push a new element into the bounded buffer immediately. + * The element will not be pushed when the buffer is full. + * \param elem the element reference pop to + * \return false when the buffer is full + */ + bool push_with_haste(const elem_type &elem){ + return _detail.push_with_haste(elem); + } + + /*! + * Push a new element into the bounded buffer. + * If the buffer is full prior to the push, + * make room by poping the oldest element. + * \param elem the new element to push + * \return true if the element fit without popping for space + */ + bool push_with_pop_on_full(const elem_type &elem){ + return _detail.push_with_pop_on_full(elem); + } + + /*! + * Push a new element into the bounded_buffer. + * Wait until the bounded_buffer becomes non-full. + * \param elem the new element to push + */ + void push_with_wait(const elem_type &elem){ + return _detail.push_with_wait(elem); + } + + /*! + * Push a new element into the bounded_buffer. + * Wait until the bounded_buffer becomes non-full or timeout. + * \param elem the new element to push + * \param timeout the timeout in seconds + * \return false when the operation times out + */ + bool push_with_timed_wait(const elem_type &elem, double timeout){ + return _detail.push_with_timed_wait(elem, timeout); + } + + /*! + * Pop an element from the bounded buffer immediately. + * The element will not be popped when the buffer is empty. + * \param elem the element reference pop to + * \return false when the buffer is empty + */ + bool pop_with_haste(elem_type &elem){ + return _detail.pop_with_haste(elem); + } + + /*! + * Pop an element from the bounded_buffer. + * Wait until the bounded_buffer becomes non-empty. + * \param elem the element reference pop to + */ + void pop_with_wait(elem_type &elem){ + return _detail.pop_with_wait(elem); + } + + /*! + * Pop an element from the bounded_buffer. + * Wait until the bounded_buffer becomes non-empty or timeout. + * \param elem the element reference pop to + * \param timeout the timeout in seconds + * \return false when the operation times out + */ + bool pop_with_timed_wait(elem_type &elem, double timeout){ + return _detail.pop_with_timed_wait(elem, timeout); + } + + private: bounded_buffer_detail<elem_type> _detail; + }; + +}} //namespace + +#endif /* INCLUDED_UHD_TRANSPORT_BOUNDED_BUFFER_HPP */ diff --git a/host/include/uhd/transport/bounded_buffer.ipp b/host/include/uhd/transport/bounded_buffer.ipp new file mode 100644 index 000000000..0d393ad64 --- /dev/null +++ b/host/include/uhd/transport/bounded_buffer.ipp @@ -0,0 +1,147 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TRANSPORT_BOUNDED_BUFFER_IPP +#define INCLUDED_UHD_TRANSPORT_BOUNDED_BUFFER_IPP + +#include <uhd/config.hpp> +#include <boost/bind.hpp> +#include <boost/function.hpp> +#include <boost/circular_buffer.hpp> +#include <boost/thread/condition.hpp> +#include <boost/thread/locks.hpp> + +namespace uhd{ namespace transport{ namespace{ /*anon*/ + + template <typename elem_type> class bounded_buffer_detail{ + public: + + bounded_buffer_detail(size_t capacity): + _buffer(capacity) + { + _not_full_fcn = boost::bind(&bounded_buffer_detail<elem_type>::not_full, this); + _not_empty_fcn = boost::bind(&bounded_buffer_detail<elem_type>::not_empty, this); + } + + UHD_INLINE bool push_with_haste(const elem_type &elem){ + boost::mutex::scoped_lock lock(_mutex); + if (_buffer.full()) return false; + _buffer.push_front(elem); + lock.unlock(); + _empty_cond.notify_one(); + return true; + } + + UHD_INLINE bool push_with_pop_on_full(const elem_type &elem){ + boost::mutex::scoped_lock lock(_mutex); + if (_buffer.full()){ + _buffer.pop_back(); + _buffer.push_front(elem); + lock.unlock(); + _empty_cond.notify_one(); + return false; + } + else{ + _buffer.push_front(elem); + lock.unlock(); + _empty_cond.notify_one(); + return true; + } + } + + UHD_INLINE void push_with_wait(const elem_type &elem){ + if (this->push_with_haste(elem)) return; + boost::mutex::scoped_lock lock(_mutex); + _full_cond.wait(lock, _not_full_fcn); + _buffer.push_front(elem); + lock.unlock(); + _empty_cond.notify_one(); + } + + UHD_INLINE bool push_with_timed_wait(const elem_type &elem, double timeout){ + if (this->push_with_haste(elem)) return true; + boost::mutex::scoped_lock lock(_mutex); + if (not _full_cond.timed_wait( + lock, to_time_dur(timeout), _not_full_fcn + )) return false; + _buffer.push_front(elem); + lock.unlock(); + _empty_cond.notify_one(); + return true; + } + + UHD_INLINE bool pop_with_haste(elem_type &elem){ + boost::mutex::scoped_lock lock(_mutex); + if (_buffer.empty()) return false; + elem = this->pop_back(); + lock.unlock(); + _full_cond.notify_one(); + return true; + } + + UHD_INLINE void pop_with_wait(elem_type &elem){ + if (this->pop_with_haste(elem)) return; + boost::mutex::scoped_lock lock(_mutex); + _empty_cond.wait(lock, _not_empty_fcn); + elem = this->pop_back(); + lock.unlock(); + _full_cond.notify_one(); + } + + UHD_INLINE bool pop_with_timed_wait(elem_type &elem, double timeout){ + if (this->pop_with_haste(elem)) return true; + boost::mutex::scoped_lock lock(_mutex); + if (not _empty_cond.timed_wait( + lock, to_time_dur(timeout), _not_empty_fcn + )) return false; + elem = this->pop_back(); + lock.unlock(); + _full_cond.notify_one(); + return true; + } + + private: + boost::mutex _mutex; + boost::condition _empty_cond, _full_cond; + boost::circular_buffer<elem_type> _buffer; + + bool not_full(void) const{return not _buffer.full();} + bool not_empty(void) const{return not _buffer.empty();} + + boost::function<bool(void)> _not_full_fcn, _not_empty_fcn; + + /*! + * Three part operation to pop an element: + * 1) assign elem to the back element + * 2) assign the back element to empty + * 3) pop the back to move the counter + */ + UHD_INLINE elem_type pop_back(void){ + elem_type elem = _buffer.back(); + _buffer.back() = elem_type(); + _buffer.pop_back(); + return elem; + } + + static UHD_INLINE boost::posix_time::time_duration to_time_dur(double timeout){ + return boost::posix_time::microseconds(long(timeout*1e6)); + } + + }; +}}} //namespace + +#endif /* INCLUDED_UHD_TRANSPORT_BOUNDED_BUFFER_IPP */ diff --git a/host/include/uhd/transport/buffer_pool.hpp b/host/include/uhd/transport/buffer_pool.hpp new file mode 100644 index 000000000..84a338097 --- /dev/null +++ b/host/include/uhd/transport/buffer_pool.hpp @@ -0,0 +1,59 @@ +// +// Copyright 2011-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TRANSPORT_BUFFER_POOL_HPP +#define INCLUDED_UHD_TRANSPORT_BUFFER_POOL_HPP + +#include <uhd/config.hpp> +#include <boost/utility.hpp> +#include <boost/shared_ptr.hpp> + +namespace uhd{ namespace transport{ + + /*! + * A buffer pool manages memory for a homogeneous set of buffers. + * Each buffer is the pool start at a 16-byte alignment boundary. + */ + class UHD_API buffer_pool : boost::noncopyable{ + public: + typedef boost::shared_ptr<buffer_pool> sptr; + typedef void * ptr_type; + + /*! + * Make a new buffer pool. + * \param num_buffs the number of buffers to allocate + * \param buff_size the size of each buffer in bytes + * \param alignment the alignment boundary in bytes + * \return a new buffer pool buff_size X num_buffs + */ + static sptr make( + const size_t num_buffs, + const size_t buff_size, + const size_t alignment = 16 + ); + + //! Get a pointer to the buffer start at the specified index + virtual ptr_type at(const size_t index) const = 0; + + //! Get the number of buffers in this pool + virtual size_t size(void) const = 0; + }; + +}} //namespace + + +#endif /* INCLUDED_UHD_TRANSPORT_BUFFER_POOL_HPP */ diff --git a/host/include/uhd/transport/if_addrs.hpp b/host/include/uhd/transport/if_addrs.hpp new file mode 100644 index 000000000..689aff42c --- /dev/null +++ b/host/include/uhd/transport/if_addrs.hpp @@ -0,0 +1,46 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TRANSPORT_IF_ADDRS_HPP +#define INCLUDED_UHD_TRANSPORT_IF_ADDRS_HPP + +#include <uhd/config.hpp> +#include <string> +#include <vector> + +namespace uhd{ namespace transport{ + + /*! + * The address for a network interface. + */ + struct UHD_API if_addrs_t{ + std::string inet; + std::string mask; + std::string bcast; + }; + + /*! + * Get a list of network interface addresses. + * The internal implementation is system-dependent. + * \return a vector of if addrs + */ + UHD_API std::vector<if_addrs_t> get_if_addrs(void); + +}} //namespace + + +#endif /* INCLUDED_UHD_TRANSPORT_IF_ADDRS_HPP */ diff --git a/host/include/uhd/transport/udp_simple.hpp b/host/include/uhd/transport/udp_simple.hpp new file mode 100644 index 000000000..83f895ba9 --- /dev/null +++ b/host/include/uhd/transport/udp_simple.hpp @@ -0,0 +1,84 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TRANSPORT_UDP_SIMPLE_HPP +#define INCLUDED_UHD_TRANSPORT_UDP_SIMPLE_HPP + +#include <uhd/config.hpp> +#include <boost/asio/buffer.hpp> +#include <boost/utility.hpp> +#include <boost/shared_ptr.hpp> + +namespace uhd{ namespace transport{ + +class UHD_API udp_simple : boost::noncopyable{ +public: + typedef boost::shared_ptr<udp_simple> sptr; + + //! The maximum number of bytes per udp packet. + static const size_t mtu = 1500 - 20 - 8; //default ipv4 mtu - ipv4 header - udp header + + /*! + * Make a new connected udp transport: + * This transport is for sending and receiving + * between this host and a single endpoint. + * The primary usage for this transport will be control transactions. + * The underlying implementation is simple and portable (not fast). + * + * The address will be resolved, it can be a host name or ipv4. + * The port will be resolved, it can be a port type or number. + * + * \param addr a string representing the destination address + * \param port a string representing the destination port + */ + static sptr make_connected(const std::string &addr, const std::string &port); + + /*! + * Make a new broadcasting udp transport: + * This transport can send udp broadcast datagrams + * and receive datagrams from multiple sources. + * The primary usage for this transport will be to discover devices. + * + * The address will be resolved, it can be a host name or ipv4. + * The port will be resolved, it can be a port type or number. + * + * \param addr a string representing the destination address + * \param port a string representing the destination port + */ + static sptr make_broadcast(const std::string &addr, const std::string &port); + + /*! + * Send a single buffer. + * Blocks until the data is sent. + * \param buff single asio buffer + * \return the number of bytes sent + */ + virtual size_t send(const boost::asio::const_buffer &buff) = 0; + + /*! + * Receive into the provided buffer. + * Blocks until data is received or a timeout occurs. + * \param buff a mutable buffer to receive into + * \param timeout the timeout in seconds + * \return the number of bytes received or zero on timeout + */ + virtual size_t recv(const boost::asio::mutable_buffer &buff, double timeout = 0.1) = 0; +}; + +}} //namespace + +#endif /* INCLUDED_UHD_TRANSPORT_UDP_SIMPLE_HPP */ diff --git a/host/include/uhd/transport/udp_zero_copy.hpp b/host/include/uhd/transport/udp_zero_copy.hpp new file mode 100644 index 000000000..bbba97b21 --- /dev/null +++ b/host/include/uhd/transport/udp_zero_copy.hpp @@ -0,0 +1,65 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TRANSPORT_UDP_ZERO_COPY_HPP +#define INCLUDED_UHD_TRANSPORT_UDP_ZERO_COPY_HPP + +#include <uhd/config.hpp> +#include <uhd/transport/zero_copy.hpp> +#include <uhd/types/device_addr.hpp> +#include <boost/shared_ptr.hpp> + +namespace uhd{ namespace transport{ + +/*! + * A zero copy udp transport provides an efficient way to handle data. + * by avoiding the extra copy when recv() or send() is called on the socket. + * Rather, the zero copy transport gives the caller memory references. + * The caller informs the transport when it is finished with the reference. + * + * On linux systems, the zero copy transport can use a kernel packet ring. + * If no platform specific solution is available, make returns a boost asio + * implementation that wraps the functionality around a standard send/recv calls. + */ +class UHD_API udp_zero_copy : public virtual zero_copy_if{ +public: + typedef boost::shared_ptr<udp_zero_copy> sptr; + + /*! + * Make a new zero copy udp transport: + * This transport is for sending and receiving + * between this host and a single endpoint. + * The primary usage for this transport will be data transactions. + * The underlying implementation is fast and platform specific. + * + * The address will be resolved, it can be a host name or ipv4. + * The port will be resolved, it can be a port type or number. + * + * \param addr a string representing the destination address + * \param port a string representing the destination port + * \param hints optional parameters to pass to the underlying transport + */ + static sptr make( + const std::string &addr, + const std::string &port, + const device_addr_t &hints = device_addr_t() + ); +}; + +}} //namespace + +#endif /* INCLUDED_UHD_TRANSPORT_UDP_ZERO_COPY_HPP */ diff --git a/host/include/uhd/transport/usb_control.hpp b/host/include/uhd/transport/usb_control.hpp new file mode 100644 index 000000000..e6c32f78e --- /dev/null +++ b/host/include/uhd/transport/usb_control.hpp @@ -0,0 +1,65 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TRANSPORT_USB_CONTROL_HPP +#define INCLUDED_UHD_TRANSPORT_USB_CONTROL_HPP + +#include <uhd/transport/usb_device_handle.hpp> + +namespace uhd { namespace transport { + +class UHD_API usb_control : boost::noncopyable { +public: + typedef boost::shared_ptr<usb_control> sptr; + + /*! + * Create a new usb control transport: + * This transport is for sending and receiving control information from + * the host to device using the Default Control Pipe. + * + * \param handle a device handle that uniquely identifies a USB device + */ + static sptr make(usb_device_handle::sptr handle); + + /*! + * Submit a USB device request: + * Blocks until the request returns + * + * For format and corresponding USB request fields + * see USB Specification Revision 2.0 - 9.3 USB Device Requests + * + * Usage is device specific + * + * \param request_type 1-byte bitmask (bmRequestType) + * \param request 1-byte (bRequest) + * \param value 2-byte (wValue) + * \param index 2-byte (wIndex) + * \param buff buffer to hold send or receive data + * \param length 2-byte (wLength) + * \return number of bytes submitted or error code + */ + virtual ssize_t submit(boost::uint8_t request_type, + boost::uint8_t request, + boost::uint16_t value, + boost::uint16_t index, + unsigned char *buff, + boost::uint16_t length) = 0; +}; + +}} //namespace + +#endif /* INCLUDED_UHD_TRANSPORT_USB_CONTROL_HPP */ diff --git a/host/include/uhd/transport/usb_device_handle.hpp b/host/include/uhd/transport/usb_device_handle.hpp new file mode 100644 index 000000000..6f8d868be --- /dev/null +++ b/host/include/uhd/transport/usb_device_handle.hpp @@ -0,0 +1,73 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TRANSPORT_USB_DEVICE_HANDLE_HPP +#define INCLUDED_UHD_TRANSPORT_USB_DEVICE_HANDLE_HPP + +#include <uhd/config.hpp> +#include <boost/utility.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/cstdint.hpp> +#include <vector> + +namespace uhd { namespace transport { + +/*! + * Device handle class that represents a USB device + * Used for identifying devices on the USB bus and selecting which device is + * used when creating a USB transport. A minimal subset of USB descriptor + * fields are used. Fields can be found in the USB 2.0 specification Table + * 9-8 (Standard Device Descriptor). In addition to fields of the device + * descriptor, the interface returns the device's USB device address. + * + * Note: The USB 2.0 Standard Device Descriptor contains an index rather then + * a true descriptor serial number string. This interface returns the + * actual string descriptor. + */ +class UHD_API usb_device_handle : boost::noncopyable { +public: + typedef boost::shared_ptr<usb_device_handle> sptr; + + /*! + * Return the device's serial number + * \return a string describing the device's serial number + */ + virtual std::string get_serial() const = 0; + + /*! + * Return the device's Vendor ID (usually assigned by the USB-IF) + * \return a Vendor ID + */ + virtual boost::uint16_t get_vendor_id() const = 0; + + /*! + * Return the device's Product ID (usually assigned by manufacturer) + * \return a Product ID + */ + virtual boost::uint16_t get_product_id() const = 0; + + /*! + * Return a vector of USB devices on this host + * \return a vector of USB device handles that match vid and pid + */ + static std::vector<usb_device_handle::sptr> get_device_list(boost::uint16_t vid, boost::uint16_t pid); + +}; //namespace usb + +}} //namespace + +#endif /* INCLUDED_UHD_TRANSPORT_USB_DEVICE_HANDLE_HPP */ diff --git a/host/include/uhd/transport/usb_zero_copy.hpp b/host/include/uhd/transport/usb_zero_copy.hpp new file mode 100644 index 000000000..b39171fba --- /dev/null +++ b/host/include/uhd/transport/usb_zero_copy.hpp @@ -0,0 +1,63 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TRANSPORT_USB_ZERO_COPY_HPP +#define INCLUDED_UHD_TRANSPORT_USB_ZERO_COPY_HPP + +#include <uhd/transport/usb_device_handle.hpp> +#include <uhd/transport/zero_copy.hpp> +#include <uhd/types/device_addr.hpp> + +namespace uhd { namespace transport { + +/*! + * A zero copy usb transport provides an efficient way to handle data. + * by avoiding the extra copy when recv() or send() is called on the handle. + * Rather, the zero copy transport gives the caller memory references. + * The caller informs the transport when it is finished with the reference. + * + * On linux systems, the zero copy transport can use a kernel packet ring. + * If no platform specific solution is available, make returns a boost asio + * implementation that wraps functionality around standard send/recv calls. + */ +class UHD_API usb_zero_copy : public virtual zero_copy_if { +public: + typedef boost::shared_ptr<usb_zero_copy> sptr; + + /*! + * Make a new zero copy usb transport: + * This transport is for sending and receiving between the host + * and a pair of USB bulk transfer endpoints. + * The primary usage for this transport is data transactions. + * The underlying implementation may be platform specific. + * + * \param handle a device handle that uniquely identifying the device + * \param recv_endpoint an integer specifiying an IN endpoint number + * \param send_endpoint an integer specifiying an OUT endpoint number + * \param hints optional parameters to pass to the underlying transport + */ + static sptr make( + usb_device_handle::sptr handle, + size_t recv_endpoint, + size_t send_endpoint, + const device_addr_t &hints = device_addr_t() + ); +}; + +}} //namespace + +#endif /* INCLUDED_UHD_TRANSPORT_USB_ZERO_COPY_HPP */ diff --git a/host/include/uhd/transport/vrt_if_packet.hpp b/host/include/uhd/transport/vrt_if_packet.hpp new file mode 100644 index 000000000..51bd81bb1 --- /dev/null +++ b/host/include/uhd/transport/vrt_if_packet.hpp @@ -0,0 +1,106 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TRANSPORT_VRT_IF_PACKET_HPP +#define INCLUDED_UHD_TRANSPORT_VRT_IF_PACKET_HPP + +#include <uhd/config.hpp> +#include <boost/cstdint.hpp> +#include <cstddef> //size_t + +namespace uhd{ namespace transport{ + +namespace vrt{ + + //! The maximum number of 32-bit words in a vrt if packet header + static const size_t max_if_hdr_words32 = 7; //hdr+sid+cid+tsi+tsf + + /*! + * Definition for fields that can be packed into a vrt if header. + * The size fields are used for input and output depending upon + * the operation used (ie the pack or unpack function call). + */ + struct UHD_API if_packet_info_t{ + //packet type (pack only supports data) + enum packet_type_t { + PACKET_TYPE_DATA = 0x0, + PACKET_TYPE_EXTENSION = 0x1, + PACKET_TYPE_CONTEXT = 0x2 + } packet_type; + + //size fields + size_t num_payload_words32; //required in pack, derived in unpack + size_t num_header_words32; //derived in pack, derived in unpack + size_t num_packet_words32; //derived in pack, required in unpack + + //header fields + size_t packet_count; + bool sob, eob; + + //optional fields + bool has_sid; boost::uint32_t sid; + bool has_cid; boost::uint64_t cid; + bool has_tsi; boost::uint32_t tsi; + bool has_tsf; boost::uint64_t tsf; + bool has_tlr; boost::uint32_t tlr; + }; + + /*! + * Pack a vrt header from metadata (big endian format). + * \param packet_buff memory to write the packed vrt header + * \param if_packet_info the if packet info (read/write) + */ + UHD_API void if_hdr_pack_be( + boost::uint32_t *packet_buff, + if_packet_info_t &if_packet_info + ); + + /*! + * Unpack a vrt header to metadata (big endian format). + * \param packet_buff memory to read the packed vrt header + * \param if_packet_info the if packet info (read/write) + */ + UHD_API void if_hdr_unpack_be( + const boost::uint32_t *packet_buff, + if_packet_info_t &if_packet_info + ); + + /*! + * Pack a vrt header from metadata (little endian format). + * \param packet_buff memory to write the packed vrt header + * \param if_packet_info the if packet info (read/write) + */ + UHD_API void if_hdr_pack_le( + boost::uint32_t *packet_buff, + if_packet_info_t &if_packet_info + ); + + /*! + * Unpack a vrt header to metadata (little endian format). + * \param packet_buff memory to read the packed vrt header + * \param if_packet_info the if packet info (read/write) + */ + UHD_API void if_hdr_unpack_le( + const boost::uint32_t *packet_buff, + if_packet_info_t &if_packet_info + ); + +} //namespace vrt + +}} //namespace + +#endif /* INCLUDED_UHD_TRANSPORT_VRT_IF_PACKET_HPP */ diff --git a/host/include/uhd/transport/zero_copy.hpp b/host/include/uhd/transport/zero_copy.hpp new file mode 100644 index 000000000..092028d09 --- /dev/null +++ b/host/include/uhd/transport/zero_copy.hpp @@ -0,0 +1,157 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TRANSPORT_ZERO_COPY_HPP +#define INCLUDED_UHD_TRANSPORT_ZERO_COPY_HPP + +#include <uhd/config.hpp> +#include <boost/utility.hpp> +#include <boost/shared_ptr.hpp> + +namespace uhd{ namespace transport{ + + /*! + * A managed receive buffer: + * Contains a reference to transport-managed memory, + * and a method to release the memory after reading. + */ + class UHD_API managed_recv_buffer{ + public: + typedef boost::shared_ptr<managed_recv_buffer> sptr; + + /*! + * Signal to the transport that we are done with the buffer. + * This should be called to release the buffer to the transport object. + * After calling, the referenced memory should be considered invalid. + */ + virtual void release(void) = 0; + + /*! + * Get a pointer to the underlying buffer. + * \return a pointer into memory + */ + template <class T> inline T cast(void) const{ + return static_cast<T>(this->get_buff()); + } + + /*! + * Get the size of the underlying buffer. + * \return the number of bytes + */ + inline size_t size(void) const{ + return this->get_size(); + } + + private: + virtual const void *get_buff(void) const = 0; + virtual size_t get_size(void) const = 0; + }; + + /*! + * A managed send buffer: + * Contains a reference to transport-managed memory, + * and a method to commit the memory after writing. + */ + class UHD_API managed_send_buffer{ + public: + typedef boost::shared_ptr<managed_send_buffer> sptr; + + /*! + * Signal to the transport that we are done with the buffer. + * This should be called to commit the write to the transport object. + * After calling, the referenced memory should be considered invalid. + * \param num_bytes the number of bytes written into the buffer + */ + virtual void commit(size_t num_bytes) = 0; + + /*! + * Get a pointer to the underlying buffer. + * \return a pointer into memory + */ + template <class T> inline T cast(void) const{ + return static_cast<T>(this->get_buff()); + } + + /*! + * Get the size of the underlying buffer. + * \return the number of bytes + */ + inline size_t size(void) const{ + return this->get_size(); + } + + private: + virtual void *get_buff(void) const = 0; + virtual size_t get_size(void) const = 0; + }; + + /*! + * A zero-copy interface for transport objects. + * Provides a way to get send and receive buffers + * with memory managed by the transport object. + */ + class UHD_API zero_copy_if : boost::noncopyable{ + public: + typedef boost::shared_ptr<zero_copy_if> sptr; + + /*! + * Get a new receive buffer from this transport object. + * \param timeout the timeout to get the buffer in seconds + * \return a managed buffer, or null sptr on timeout/error + */ + virtual managed_recv_buffer::sptr get_recv_buff(double timeout = 0.1) = 0; + + /*! + * Get the number of receive frames: + * The number of simultaneous receive buffers in use. + * \return number of frames + */ + virtual size_t get_num_recv_frames(void) const = 0; + + /*! + * Get the size of a receive frame: + * The maximum capacity of a single receive buffer. + * \return frame size in bytes + */ + virtual size_t get_recv_frame_size(void) const = 0; + + /*! + * Get a new send buffer from this transport object. + * \param timeout the timeout to get the buffer in seconds + * \return a managed buffer, or null sptr on timeout/error + */ + virtual managed_send_buffer::sptr get_send_buff(double timeout = 0.1) = 0; + + /*! + * Get the number of send frames: + * The number of simultaneous send buffers in use. + * \return number of frames + */ + virtual size_t get_num_send_frames(void) const = 0; + + /*! + * Get the size of a send frame: + * The maximum capacity of a single send buffer. + * \return frame size in bytes + */ + virtual size_t get_send_frame_size(void) const = 0; + + }; + +}} //namespace + +#endif /* INCLUDED_UHD_TRANSPORT_ZERO_COPY_HPP */ diff --git a/host/include/uhd/types/CMakeLists.txt b/host/include/uhd/types/CMakeLists.txt new file mode 100644 index 000000000..c856e5568 --- /dev/null +++ b/host/include/uhd/types/CMakeLists.txt @@ -0,0 +1,37 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + + +INSTALL(FILES + clock_config.hpp + device_addr.hpp + dict.ipp + dict.hpp + io_type.hpp + mac_addr.hpp + metadata.hpp + otw_type.hpp + ranges.hpp + ref_vector.hpp + sensors.hpp + serial.hpp + stream_cmd.hpp + time_spec.hpp + tune_request.hpp + tune_result.hpp + DESTINATION ${INCLUDE_DIR}/uhd/types +) diff --git a/host/include/uhd/types/clock_config.hpp b/host/include/uhd/types/clock_config.hpp new file mode 100644 index 000000000..a72eb63de --- /dev/null +++ b/host/include/uhd/types/clock_config.hpp @@ -0,0 +1,54 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_CLOCK_CONFIG_HPP +#define INCLUDED_UHD_TYPES_CLOCK_CONFIG_HPP + +#include <uhd/config.hpp> + +namespace uhd{ + + /*! + * Clock configuration settings: + * The source for the 10MHz reference clock. + * The source and polarity for the PPS clock. + */ + struct UHD_API clock_config_t{ + //------ simple usage --------// + static clock_config_t external(void); + static clock_config_t internal(void); + + //------ advanced usage --------// + enum ref_source_t { + REF_AUTO = 'a', //automatic (device specific) + REF_INT = 'i', //internal reference + REF_SMA = 's', //external sma port + } ref_source; + enum pps_source_t { + PPS_INT = 'i', //there is no internal + PPS_SMA = 's', //external sma port + } pps_source; + enum pps_polarity_t { + PPS_NEG = 'n', //negative edge + PPS_POS = 'p' //positive edge + } pps_polarity; + clock_config_t(void); + }; + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_CLOCK_CONFIG_HPP */ diff --git a/host/include/uhd/types/device_addr.hpp b/host/include/uhd/types/device_addr.hpp new file mode 100644 index 000000000..2c0841146 --- /dev/null +++ b/host/include/uhd/types/device_addr.hpp @@ -0,0 +1,98 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_DEVICE_ADDR_HPP +#define INCLUDED_UHD_TYPES_DEVICE_ADDR_HPP + +#include <uhd/config.hpp> +#include <uhd/types/dict.hpp> +#include <boost/lexical_cast.hpp> +#include <stdexcept> +#include <vector> +#include <string> + +namespace uhd{ + + /*! + * Mapping of key/value pairs for locating devices on the system. + * When left empty, the device discovery routines will search + * all available transports on the system (ethernet, usb...). + * + * To narrow down the discovery process to a particular device, + * specify a transport key/value pair specific to your device. + * - Ex, to find a usrp2: my_dev_addr["addr"] = [resolvable_hostname_or_ip] + * + * The device address can also be used to pass arguments into + * the transport layer control to set (for example) buffer sizes. + * + * An arguments string, is a way to represent a device address + * using a single string with delimiter characters. + * - Ex: addr=192.168.10.2 + * - Ex: addr=192.168.10.2, recv_buff_size=1e6 + */ + class UHD_API device_addr_t : public dict<std::string, std::string>{ + public: + /*! + * Create a device address from an args string. + * \param args the arguments string + */ + device_addr_t(const std::string &args = ""); + + /*! + * Convert a device address into a pretty print string. + * \return a printable string representing the device address + */ + std::string to_pp_string(void) const; + + /*! + * Convert the device address into an args string. + * The args string contains delimiter symbols. + * \return a string with delimiter markup + */ + std::string to_string(void) const; + + /*! + * Lexically cast a parameter to the specified type, + * or use the default value if the key is not found. + * \param key the key as one of the address parameters + * \param def the value to use when key is not present + * \return the casted value as type T or the default + * \throw error when the parameter cannot be casted + */ + template <typename T> T cast(const std::string &key, const T &def) const{ + if (not this->has_key(key)) return def; + try{ + return boost::lexical_cast<T>((*this)[key]); + } + catch(const boost::bad_lexical_cast &){ + throw std::runtime_error("cannot cast " + key + " = " + (*this)[key]); + } + } + }; + + //! A typedef for a vector of device addresses + typedef std::vector<device_addr_t> device_addrs_t; + + //! Separate an indexed device address into a vector of device addresses + UHD_API device_addrs_t separate_device_addr(const device_addr_t &dev_addr); + + //! Combine a vector of device addresses into an indexed device address + UHD_API device_addr_t combine_device_addrs(const device_addrs_t &dev_addrs); + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_DEVICE_ADDR_HPP */ diff --git a/host/include/uhd/types/dict.hpp b/host/include/uhd/types/dict.hpp new file mode 100644 index 000000000..97fa8f09c --- /dev/null +++ b/host/include/uhd/types/dict.hpp @@ -0,0 +1,129 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_DICT_HPP +#define INCLUDED_UHD_TYPES_DICT_HPP + +#include <uhd/config.hpp> +#include <vector> +#include <list> + +namespace uhd{ + + /*! + * A templated dictionary class with a python-like interface. + */ + template <typename Key, typename Val> class dict{ + public: + /*! + * Create a new empty dictionary. + */ + dict(void); + + /*! + * Input iterator constructor: + * Makes boost::assign::map_list_of work. + * \param first the begin iterator + * \param last the end iterator + */ + template <typename InputIterator> + dict(InputIterator first, InputIterator last); + + /*! + * Get the number of elements in this dict. + * \return the number of elements + */ + std::size_t size(void) const; + + /*! + * Get a list of the keys in this dict. + * Key order depends on insertion precedence. + * \return vector of keys + */ + std::vector<Key> keys(void) const; + + /*! + * Get a list of the values in this dict. + * Value order depends on insertion precedence. + * \return vector of values + */ + std::vector<Val> vals(void) const; + + /*! + * Does the dictionary contain this key? + * \param key the key to look for + * \return true if found + */ + bool has_key(const Key &key) const; + + /*! + * Get a value in the dict or default. + * \param key the key to look for + * \param other use if key not found + * \return the value or default + */ + const Val &get(const Key &key, const Val &other) const; + + /*! + * Get a value in the dict or throw. + * \param key the key to look for + * \return the value or default + */ + const Val &get(const Key &key) const; + + /*! + * Set a value in the dict at the key. + * \param key the key to set at + * \param val the value to set + */ + void set(const Key &key, const Val &val); + + /*! + * Get a value for the given key if it exists. + * If the key is not found throw an error. + * \param key the key to look for + * \return the value at the key + * \throw an exception when not found + */ + const Val &operator[](const Key &key) const; + + /*! + * Set a value for the given key, however, in reality + * it really returns a reference which can be assigned to. + * \param key the key to set to + * \return a reference to the value + */ + Val &operator[](const Key &key); + + /*! + * Pop an item out of the dictionary. + * \param key the item key + * \return the value of the item + * \throw an exception when not found + */ + Val pop(const Key &key); + + private: + typedef std::pair<Key, Val> pair_t; + std::list<pair_t> _map; //private container + }; + +} //namespace uhd + +#include <uhd/types/dict.ipp> + +#endif /* INCLUDED_UHD_TYPES_DICT_HPP */ diff --git a/host/include/uhd/types/dict.ipp b/host/include/uhd/types/dict.ipp new file mode 100644 index 000000000..5e9cf97ad --- /dev/null +++ b/host/include/uhd/types/dict.ipp @@ -0,0 +1,140 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_DICT_IPP +#define INCLUDED_UHD_TYPES_DICT_IPP + +#include <uhd/exception.hpp> +#include <boost/foreach.hpp> +#include <boost/format.hpp> +#include <boost/lexical_cast.hpp> +#include <typeinfo> + +namespace uhd{ + + namespace /*anon*/{ + template<typename Key, typename Val> + struct key_not_found: uhd::key_error{ + key_not_found(const Key &key): uhd::key_error( + str(boost::format( + "key \"%s\" not found in dict(%s, %s)" + ) % boost::lexical_cast<std::string>(key) + % typeid(Key).name() % typeid(Val).name() + ) + ){ + /* NOP */ + } + }; + } // namespace /*anon*/ + + template <typename Key, typename Val> + dict<Key, Val>::dict(void){ + /* NOP */ + } + + template <typename Key, typename Val> template <typename InputIterator> + dict<Key, Val>::dict(InputIterator first, InputIterator last): + _map(first, last) + { + /* NOP */ + } + + template <typename Key, typename Val> + std::size_t dict<Key, Val>::size(void) const{ + return _map.size(); + } + + template <typename Key, typename Val> + std::vector<Key> dict<Key, Val>::keys(void) const{ + std::vector<Key> keys; + BOOST_FOREACH(const pair_t &p, _map){ + keys.push_back(p.first); + } + return keys; + } + + template <typename Key, typename Val> + std::vector<Val> dict<Key, Val>::vals(void) const{ + std::vector<Val> vals; + BOOST_FOREACH(const pair_t &p, _map){ + vals.push_back(p.second); + } + return vals; + } + + template <typename Key, typename Val> + bool dict<Key, Val>::has_key(const Key &key) const{ + BOOST_FOREACH(const pair_t &p, _map){ + if (p.first == key) return true; + } + return false; + } + + template <typename Key, typename Val> + const Val &dict<Key, Val>::get(const Key &key, const Val &other) const{ + BOOST_FOREACH(const pair_t &p, _map){ + if (p.first == key) return p.second; + } + return other; + } + + template <typename Key, typename Val> + const Val &dict<Key, Val>::get(const Key &key) const{ + BOOST_FOREACH(const pair_t &p, _map){ + if (p.first == key) return p.second; + } + throw key_not_found<Key, Val>(key); + } + + template <typename Key, typename Val> + void dict<Key, Val>::set(const Key &key, const Val &val){ + (*this)[key] = val; + } + + template <typename Key, typename Val> + const Val &dict<Key, Val>::operator[](const Key &key) const{ + BOOST_FOREACH(const pair_t &p, _map){ + if (p.first == key) return p.second; + } + throw key_not_found<Key, Val>(key); + } + + template <typename Key, typename Val> + Val &dict<Key, Val>::operator[](const Key &key){ + BOOST_FOREACH(pair_t &p, _map){ + if (p.first == key) return p.second; + } + _map.push_back(std::make_pair(key, Val())); + return _map.back().second; + } + + template <typename Key, typename Val> + Val dict<Key, Val>::pop(const Key &key){ + typename std::list<pair_t>::iterator it; + for (it = _map.begin(); it != _map.end(); it++){ + if (it->first == key){ + Val val = it->second; + _map.erase(it); + return val; + } + } + throw key_not_found<Key, Val>(key); + } + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_DICT_IPP */ diff --git a/host/include/uhd/types/io_type.hpp b/host/include/uhd/types/io_type.hpp new file mode 100644 index 000000000..990d701f9 --- /dev/null +++ b/host/include/uhd/types/io_type.hpp @@ -0,0 +1,76 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_IO_TYPE_HPP +#define INCLUDED_UHD_TYPES_IO_TYPE_HPP + +#include <uhd/config.hpp> + +namespace uhd{ + + /*! + * The Input/Output configuration struct: + * Used to specify the IO type with device send/recv. + */ + class UHD_API io_type_t{ + public: + + /*! + * Built in IO types known to the system. + */ + enum tid_t{ + //! Custom type (technically unsupported by implementation) + CUSTOM_TYPE = '?', + //! Complex floating point (64-bit floats) range [-1.0, +1.0] + COMPLEX_FLOAT64 = 'd', + //! Complex floating point (32-bit floats) range [-1.0, +1.0] + COMPLEX_FLOAT32 = 'f', + //! Complex signed integer (16-bit integers) range [-32768, +32767] + COMPLEX_INT16 = 's', + //! Complex signed integer (8-bit integers) range [-128, 127] + COMPLEX_INT8 = 'b' + }; + + /*! + * The size of this io type in bytes. + */ + const size_t size; + + /*! + * The type id of this io type. + * Good for using with switch statements. + */ + const tid_t tid; + + /*! + * Create an io type from a built-in type id. + * \param tid a type id known to the system + */ + io_type_t(tid_t tid); + + /*! + * Create an io type from attributes. + * The tid will be set to custom. + * \param size the size in bytes + */ + io_type_t(size_t size); + + }; + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_IO_TYPE_HPP */ diff --git a/host/include/uhd/types/mac_addr.hpp b/host/include/uhd/types/mac_addr.hpp new file mode 100644 index 000000000..0ced2e734 --- /dev/null +++ b/host/include/uhd/types/mac_addr.hpp @@ -0,0 +1,66 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_MAC_ADDR_HPP +#define INCLUDED_UHD_TYPES_MAC_ADDR_HPP + +#include <uhd/config.hpp> +#include <uhd/types/serial.hpp> +#include <string> + +namespace uhd{ + + /*! + * Wrapper for an ethernet mac address. + * Provides conversion between string and binary formats. + */ + class UHD_API mac_addr_t{ + public: + /*! + * Create a mac address a byte array. + * \param bytes a vector of bytes + * \return a new mac address + */ + static mac_addr_t from_bytes(const byte_vector_t &bytes); + + /*! + * Create a mac address from a string. + * \param mac_addr_str the string with delimiters + * \return a new mac address + */ + static mac_addr_t from_string(const std::string &mac_addr_str); + + /*! + * Get the byte representation of the mac address. + * \return a vector of bytes + */ + byte_vector_t to_bytes(void) const; + + /*! + * Get the string representation of this mac address. + * \return a string with delimiters + */ + std::string to_string(void) const; + + private: + mac_addr_t(const byte_vector_t &bytes); //private constructor + const byte_vector_t _bytes; //internal representation + }; + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_MAC_ADDR_HPP */ diff --git a/host/include/uhd/types/metadata.hpp b/host/include/uhd/types/metadata.hpp new file mode 100644 index 000000000..f4e084430 --- /dev/null +++ b/host/include/uhd/types/metadata.hpp @@ -0,0 +1,152 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_METADATA_HPP +#define INCLUDED_UHD_TYPES_METADATA_HPP + +#include <uhd/config.hpp> +#include <uhd/types/time_spec.hpp> + +namespace uhd{ + + /*! + * RX metadata structure for describing sent IF data. + * Includes time specification, fragmentation flags, burst flags, and error codes. + * The receive routines will convert IF data headers into metadata. + */ + struct UHD_API rx_metadata_t{ + //! Has time specification? + bool has_time_spec; + + //! Time of the first sample. + time_spec_t time_spec; + + /*! + * Fragmentation flag: + * Similar to IPv4 fragmentation: http://en.wikipedia.org/wiki/IPv4#Fragmentation_and_reassembly + * More fragments is true when the input buffer has insufficient size to fit + * an entire received packet. More fragments will be false for the last fragment. + */ + bool more_fragments; + + /*! + * Fragmentation offset: + * The fragment offset is the sample number at the start of the receive buffer. + * For non-fragmented receives, the fragment offset should always be zero. + */ + size_t fragment_offset; + + //! Start of burst will be true for the first packet in the chain. + bool start_of_burst; + + //! End of burst will be true for the last packet in the chain. + bool end_of_burst; + + /*! + * The error condition on a receive call. + * + * Note: When an overrun occurs in continuous streaming mode, + * the device will continue to send samples to the host. + * For other streaming modes, streaming will discontinue + * until the user issues a new stream command. + * + * The metadata fields have meaning for the following error codes: + * - none + * - late command + * - broken chain + * - overflow + */ + enum error_code_t { + //! No error associated with this metadata. + ERROR_CODE_NONE = 0x0, + //! No packet received, implementation timed-out. + ERROR_CODE_TIMEOUT = 0x1, + //! A stream command was issued in the past. + ERROR_CODE_LATE_COMMAND = 0x2, + //! Expected another stream command. + ERROR_CODE_BROKEN_CHAIN = 0x4, + //! An internal receive buffer has filled. + ERROR_CODE_OVERFLOW = 0x8, + //! The packet could not be parsed. + ERROR_CODE_BAD_PACKET = 0xf + } error_code; + }; + + /*! + * TX metadata structure for describing received IF data. + * Includes time specification, and start and stop burst flags. + * The send routines will convert the metadata to IF data headers. + */ + struct UHD_API tx_metadata_t{ + /*! + * Has time specification? + * - Set false to send immediately. + * - Set true to send at the time specified by time spec. + */ + bool has_time_spec; + + //! When to send the first sample. + time_spec_t time_spec; + + //! Set start of burst to true for the first packet in the chain. + bool start_of_burst; + + //! Set end of burst to true for the last packet in the chain. + bool end_of_burst; + + /*! + * The default constructor: + * Sets the fields to default values (flags set to false). + */ + tx_metadata_t(void); + }; + + /*! + * Async metadata structure for describing transmit related events. + */ + struct UHD_API async_metadata_t{ + //! The channel number in a mimo configuration + size_t channel; + + //! Has time specification? + bool has_time_spec; + + //! When the async event occurred. + time_spec_t time_spec; + + /*! + * The type of event for a receive async message call. + */ + enum event_code_t { + //! A burst was successfully transmitted. + EVENT_CODE_BURST_ACK = 0x1, + //! An internal send buffer has emptied. + EVENT_CODE_UNDERFLOW = 0x2, + //! Packet loss between host and device. + EVENT_CODE_SEQ_ERROR = 0x4, + //! Packet had time that was late (or too early). + EVENT_CODE_TIME_ERROR = 0x8, + //! Underflow occurred inside a packet. + EVENT_CODE_UNDERFLOW_IN_PACKET = 0x10, + //! Packet loss within a burst. + EVENT_CODE_SEQ_ERROR_IN_BURST = 0x20 + } event_code; + }; + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_METADATA_HPP */ diff --git a/host/include/uhd/types/otw_type.hpp b/host/include/uhd/types/otw_type.hpp new file mode 100644 index 000000000..8e3e65d78 --- /dev/null +++ b/host/include/uhd/types/otw_type.hpp @@ -0,0 +1,69 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_OTW_TYPE_HPP +#define INCLUDED_UHD_TYPES_OTW_TYPE_HPP + +#include <uhd/config.hpp> + +namespace uhd{ + + /*! + * Description for over-the-wire integers: + * The DSP units in the FPGA deal with signed 16-bit integers. + * The width and shift define the translation between OTW and DSP, + * defined by the following relation: otw_int = dsp_int >> shift + * + * Note: possible combinations of width, shift, and byteorder + * depend on the internals of the FPGA. Not all are supported! + */ + struct UHD_API otw_type_t{ + + /*! + * Width of an over-the-wire integer in bits. + */ + size_t width; //in bits + + /*! + * Shift of an over-the-wire integer in bits. + * otw_int = dsp_int >> shift + * dsp_int = otw_int << shift + */ + size_t shift; //in bits + + /*! + * Constants for byte order (borrowed from numpy's dtype) + */ + enum /*bo_t*/ { + BO_NATIVE = '=', + BO_LITTLE_ENDIAN = '<', + BO_BIG_ENDIAN = '>', + BO_NOT_APPLICABLE = '|' + } byteorder; + + /*! + * Get the sample size of this otw type. + * \return the size of a sample in bytes + */ + size_t get_sample_size(void) const; + + otw_type_t(void); + }; + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_OTW_TYPE_HPP */ diff --git a/host/include/uhd/types/ranges.hpp b/host/include/uhd/types/ranges.hpp new file mode 100644 index 000000000..f0d0e1c0b --- /dev/null +++ b/host/include/uhd/types/ranges.hpp @@ -0,0 +1,120 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_RANGES_HPP +#define INCLUDED_UHD_TYPES_RANGES_HPP + +#include <uhd/config.hpp> +#include <uhd/utils/pimpl.hpp> +#include <string> +#include <vector> + +namespace uhd{ + + /*! + * A range object describes a set of discrete values of the form: + * y = start + step*n, where n is an integer between 0 and (stop - start)/step + */ + class UHD_API range_t{ + public: + + /*! + * Create a range from a single value. + * The step size will be taken as zero. + * \param value the only possible value in this range + */ + range_t(double value = 0); + + /*! + * Create a range from a full set of values. + * A step size of zero implies infinite precision. + * \param start the minimum value for this range + * \param stop the maximum value for this range + * \param step the step size for this range + */ + range_t(double start, double stop, double step = 0); + + //! Get the start value for this range. + double start(void) const; + + //! Get the stop value for this range. + double stop(void) const; + + //! Get the step value for this range. + double step(void) const; + + //! Convert this range to a printable string + const std::string to_pp_string(void) const; + + private: UHD_PIMPL_DECL(impl) _impl; + }; + + /*! + * A meta-range object holds a list of individual ranges. + */ + struct UHD_API meta_range_t : std::vector<range_t>{ + + //! A default constructor for an empty meta-range + meta_range_t(void); + + /*! + * Input iterator constructor: + * Makes boost::assign::list_of work. + * \param first the begin iterator + * \param last the end iterator + */ + template <typename InputIterator> + meta_range_t(InputIterator first, InputIterator last): + std::vector<range_t>(first, last){ /* NOP */ } + + /*! + * A convenience constructor for a single range. + * A step size of zero implies infinite precision. + * \param start the minimum value for this range + * \param stop the maximum value for this range + * \param step the step size for this range + */ + meta_range_t(double start, double stop, double step = 0); + + //! Get the overall start value for this meta-range. + double start(void) const; + + //! Get the overall stop value for this meta-range. + double stop(void) const; + + //! Get the overall step value for this meta-range. + double step(void) const; + + /*! + * Clip the target value to a possible range value. + * \param value the value to clip to this range + * \param clip_step if true, clip to steps as well + * \return a value that is in one of the ranges + */ + double clip(double value, bool clip_step = false) const; + + //! Convert this meta-range to a printable string + const std::string to_pp_string(void) const; + + }; + + typedef meta_range_t gain_range_t; + typedef meta_range_t freq_range_t; + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_RANGES_HPP */ diff --git a/host/include/uhd/types/ref_vector.hpp b/host/include/uhd/types/ref_vector.hpp new file mode 100644 index 000000000..bbfb5434d --- /dev/null +++ b/host/include/uhd/types/ref_vector.hpp @@ -0,0 +1,85 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_REF_VECTOR_HPP +#define INCLUDED_UHD_TYPES_REF_VECTOR_HPP + +#include <uhd/config.hpp> + +namespace uhd{ + +/*! + * Reference vector: + * - Provides a std::vector-like interface for an array. + * - Statically sized, and does not manage the memory. + */ +template <typename T> class UHD_API ref_vector{ +public: + /*! + * Create a reference vector of size 1 from a pointer. + * Therefore: rv[0] == ptr and rv.size() == 1 + * \param ptr a pointer to a chunk of memory + */ + template <typename Ptr> ref_vector(Ptr *ptr): + _ptr(T(ptr)), _mem(_mem_t(&_ptr)), _size(1) + { + /* NOP */ + } + + /*! + * Create a reference vector from a std::vector container. + * Therefore: rv[n] == vec[n] and rv.size() == vec.size() + * \param vec a const reference to an std::vector + */ + template <typename Vector> ref_vector(const Vector &vec): + _ptr(T()), _mem(_mem_t(&vec.front())), _size(vec.size()) + { + /* NOP */ + } + + /*! + * Create a reference vector from a pointer and a length + * Therefore: rv[n] == mem[n] and rv.size() == len + * \param mem a pointer to an array of pointers + * \param len the length of the array of pointers + */ + ref_vector(const T *mem, size_t len): + _ptr(T()), _mem(_mem_t(mem)), _size(len) + { + /* NOP */ + } + + //! Index operator gets the value of rv[index] + const T &operator[](size_t index) const{ + return _mem[index]; + } + + //! The number of elements in this container + size_t size(void) const{ + return _size; + } + +private: + const T _ptr; + typedef T* _mem_t; + const _mem_t _mem; + const size_t _size; +}; + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_REF_VECTOR_HPP */ diff --git a/host/include/uhd/types/sensors.hpp b/host/include/uhd/types/sensors.hpp new file mode 100644 index 000000000..529e1e3e3 --- /dev/null +++ b/host/include/uhd/types/sensors.hpp @@ -0,0 +1,137 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_SENSORS_HPP +#define INCLUDED_UHD_TYPES_SENSORS_HPP + +#include <uhd/config.hpp> +#include <string> + +namespace uhd{ + + /*! + * A sensor value stores a sensor reading as a string with unit and data type. + * The sensor value class can be used in the following way: + * + * sensor_value_t ref_lock_sensor("Reference", my_lock, "unlocked", "locked"); + * std::cout << ref_lock_sensor.to_pp_string() << std::endl; + * //prints Reference: locked + * + * sensor_value_t temp_sensor("Temperature", my_temp, "C"); + * std::cout << temp_sensor.to_pp_string() << std::endl; + * //prints Temperature: 38.5 C + */ + struct UHD_API sensor_value_t{ + + /*! + * Create a sensor value from a boolean. + * \param name the name of the sensor + * \param value the value true or false + * \param utrue the unit string when value is true + * \param ufalse the unit string when value is false + */ + sensor_value_t( + const std::string &name, + bool value, + const std::string &utrue, + const std::string &ufalse + ); + + /*! + * Create a sensor value from an integer. + * \param name the name of the sensor + * \param value the signed integer value + * \param unit the associated unit type + * \param formatter the formatter string + */ + sensor_value_t( + const std::string &name, + signed value, + const std::string &unit, + const std::string &formatter = "%d" + ); + + /*! + * Create a sensor value from a real number. + * \param name the name of the sensor + * \param value the real number value + * \param unit the associated unit type + * \param formatter the formatter string + */ + sensor_value_t( + const std::string &name, + double value, + const std::string &unit, + const std::string &formatter = "%f" + ); + + /*! + * Create a sensor value from a string. + * \param name the name of the sensor + * \param value the real number value + * \param unit the associated unit type + */ + sensor_value_t( + const std::string &name, + const std::string &value, + const std::string &unit + ); + + //! convert the sensor value to a boolean + bool to_bool(void) const; + + //! convert the sensor value to an integer + signed to_int(void) const; + + //! convert the sensor value to real number + double to_real(void) const; + + //! The name of the sensor value + const std::string name; + + /*! + * The sensor value as a string. + * For integer and real number types, this will be the output of the formatter. + * For boolean types, the value will be the string literal "true" or "false". + */ + const std::string value; + + /*! + * The sensor value's unit type. + * For boolean types, this will be the one of the two units + * depending upon the value of the boolean true or false. + */ + const std::string unit; + + //! Enumeration of possible data types in a sensor + enum data_type_t { + BOOLEAN = 'b', + INTEGER = 'i', + REALNUM = 'r', + STRING = 's' + }; + + //! The data type of the value + const data_type_t type; + + //! Convert this sensor value into a printable string + std::string to_pp_string(void) const; + }; + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_SENSORS_HPP */ diff --git a/host/include/uhd/types/serial.hpp b/host/include/uhd/types/serial.hpp new file mode 100644 index 000000000..5c6de162b --- /dev/null +++ b/host/include/uhd/types/serial.hpp @@ -0,0 +1,175 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_SERIAL_HPP +#define INCLUDED_UHD_TYPES_SERIAL_HPP + +#include <uhd/config.hpp> +#include <boost/cstdint.hpp> +#include <vector> + +namespace uhd{ + + /*! + * Byte vector typedef for passing data in and out of I2C interfaces. + */ + typedef std::vector<boost::uint8_t> byte_vector_t; + + /*! + * The i2c interface class: + * Provides i2c and eeprom functionality. + * A subclass should only have to implement the i2c routines. + * An eeprom implementation comes for free with the interface. + * + * The eeprom routines are implemented on top of i2c. + * The built in eeprom implementation only does single + * byte reads and byte writes over the i2c interface, + * so it should be portable across multiple eeproms. + * Override the eeprom routines if this is not acceptable. + */ + class UHD_API i2c_iface{ + public: + /*! + * Write bytes over the i2c. + * \param addr the address + * \param buf the vector of bytes + */ + virtual void write_i2c( + boost::uint8_t addr, + const byte_vector_t &buf + ) = 0; + + /*! + * Read bytes over the i2c. + * \param addr the address + * \param num_bytes number of bytes to read + * \return a vector of bytes + */ + virtual byte_vector_t read_i2c( + boost::uint8_t addr, + size_t num_bytes + ) = 0; + + /*! + * Write bytes to an eeprom. + * \param addr the address + * \param offset byte offset + * \param buf the vector of bytes + */ + virtual void write_eeprom( + boost::uint8_t addr, + boost::uint8_t offset, + const byte_vector_t &buf + ); + + /*! + * Read bytes from an eeprom. + * \param addr the address + * \param offset byte offset + * \param num_bytes number of bytes to read + * \return a vector of bytes + */ + virtual byte_vector_t read_eeprom( + boost::uint8_t addr, + boost::uint8_t offset, + size_t num_bytes + ); + }; + + /*! + * The SPI configuration struct: + * Used to configure a SPI transaction interface. + */ + struct UHD_API spi_config_t{ + /*! + * The edge type specifies when data is valid + * relative to the edge of the serial clock. + */ + enum edge_t{ + EDGE_RISE = 'r', + EDGE_FALL = 'f' + }; + + //! on what edge is the mosi data valid? + edge_t mosi_edge; + + //! on what edge is the miso data valid? + edge_t miso_edge; + + /*! + * Create a new spi config. + * \param edge the default edge for mosi and miso + */ + spi_config_t(edge_t edge = EDGE_RISE); + }; + + /*! + * The SPI interface class. + * Provides routines to transact SPI and do other useful things which haven't been defined yet. + */ + class UHD_API spi_iface{ + public: + /*! + * Perform a spi transaction. + * \param which_slave the slave device number + * \param config spi config args + * \param data the bits to write + * \param num_bits how many bits in data + * \param readback true to readback a value + * \return spi data if readback set + */ + virtual boost::uint32_t transact_spi( + int which_slave, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits, + bool readback + ) = 0; + + /*! + * Read from the SPI bus. + * \param which_slave the slave device number + * \param config spi config args + * \param data the bits to write out (be sure to set write bit) + * \param num_bits how many bits in data + * \return spi data + */ + virtual boost::uint32_t read_spi( + int which_slave, + const spi_config_t &config, + boost::uint16_t data, + size_t num_bits + ); + + /*! + * Write to the SPI bus. + * \param which_slave the slave device number + * \param config spi config args + * \param data the bits to write + * \param num_bits how many bits in data + */ + virtual void write_spi( + int which_slave, + const spi_config_t &config, + boost::uint16_t data, + size_t num_bits + ); + }; + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_SERIAL_HPP */ diff --git a/host/include/uhd/types/stream_cmd.hpp b/host/include/uhd/types/stream_cmd.hpp new file mode 100644 index 000000000..41708e2e2 --- /dev/null +++ b/host/include/uhd/types/stream_cmd.hpp @@ -0,0 +1,64 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_STREAM_CMD_HPP +#define INCLUDED_UHD_TYPES_STREAM_CMD_HPP + +#include <uhd/config.hpp> +#include <uhd/types/time_spec.hpp> + +namespace uhd{ + + /*! + * Command struct for configuration and control of streaming: + * + * A stream command defines how the device sends samples to the host. + * Streaming is controlled by submitting a stream command to the rx dsp. + * Granular control over what the device streams to the host can be + * achieved through submission of multiple (carefully-crafted) commands. + * + * The mode parameter controls how streaming is issued to the device: + * - "Start continuous" tells the device to stream samples indefinitely. + * - "Stop continuous" tells the device to end continuous streaming. + * - "Num samps and done" tells the device to stream num samps and + * to not expect a future stream command for contiguous samples. + * - "Num samps and more" tells the device to stream num samps and + * to expect a future stream command for contiguous samples. + * + * The stream now parameter controls when the stream begins. + * When true, the device will begin streaming ASAP. When false, + * the device will begin streaming at a time specified by time_spec. + */ + struct UHD_API stream_cmd_t{ + + enum stream_mode_t { + STREAM_MODE_START_CONTINUOUS = 'a', + STREAM_MODE_STOP_CONTINUOUS = 'o', + STREAM_MODE_NUM_SAMPS_AND_DONE = 'd', + STREAM_MODE_NUM_SAMPS_AND_MORE = 'm' + } stream_mode; + size_t num_samps; + + bool stream_now; + time_spec_t time_spec; + + stream_cmd_t(const stream_mode_t &stream_mode); + }; + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_STREAM_CMD_HPP */ diff --git a/host/include/uhd/types/time_spec.hpp b/host/include/uhd/types/time_spec.hpp new file mode 100644 index 000000000..2046fbd3f --- /dev/null +++ b/host/include/uhd/types/time_spec.hpp @@ -0,0 +1,117 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_TIME_SPEC_HPP +#define INCLUDED_UHD_TYPES_TIME_SPEC_HPP + +#include <uhd/config.hpp> +#include <boost/operators.hpp> +#include <ctime> + +namespace uhd{ + + /*! + * A time_spec_t holds a seconds and a fractional seconds time value. + * Depending upon usage, the time_spec_t can represent absolute times, + * relative times, or time differences (between absolute times). + * + * The time_spec_t provides clock-domain independent time storage, + * but can convert fractional seconds to/from clock-domain specific units. + * + * The fractional seconds are stored as double precision floating point. + * This gives the fractional seconds enough precision to unambiguously + * specify a clock-tick/sample-count up to rates of several petahertz. + */ + class UHD_API time_spec_t : boost::additive<time_spec_t>, boost::totally_ordered<time_spec_t>{ + public: + + /*! + * Get the system time in time_spec_t format. + * Uses the highest precision clock available. + * \return the system time as a time_spec_t + */ + static time_spec_t get_system_time(void); + + /*! + * Create a time_spec_t from a real-valued seconds count. + * \param secs the real-valued seconds count (default = 0) + */ + time_spec_t(double secs = 0); + + /*! + * Create a time_spec_t from whole and fractional seconds. + * \param full_secs the whole/integer seconds count + * \param frac_secs the fractional seconds count (default = 0) + */ + time_spec_t(time_t full_secs, double frac_secs = 0); + + /*! + * Create a time_spec_t from whole and fractional seconds. + * Translation from clock-domain specific units. + * \param full_secs the whole/integer seconds count + * \param tick_count the fractional seconds tick count + * \param tick_rate the number of ticks per second + */ + time_spec_t(time_t full_secs, long tick_count, double tick_rate); + + /*! + * Convert the fractional seconds to clock ticks. + * Translation into clock-domain specific units. + * \param tick_rate the number of ticks per second + * \return the fractional seconds tick count + */ + long get_tick_count(double tick_rate) const; + + /*! + * Get the time as a real-valued seconds count. + * Note: If this time_spec_t represents an absolute time, + * the precision of the fractional seconds may be lost. + * \return the real-valued seconds + */ + double get_real_secs(void) const; + + /*! + * Get the whole/integer part of the time in seconds. + * \return the whole/integer seconds + */ + time_t get_full_secs(void) const; + + /*! + * Get the fractional part of the time in seconds. + * \return the fractional seconds + */ + double get_frac_secs(void) const; + + //! Implement addable interface + time_spec_t &operator+=(const time_spec_t &); + + //! Implement subtractable interface + time_spec_t &operator-=(const time_spec_t &); + + //private time storage details + private: time_t _full_secs; double _frac_secs; + }; + + //! Implement equality_comparable interface + UHD_API bool operator==(const time_spec_t &, const time_spec_t &); + + //! Implement less_than_comparable interface + UHD_API bool operator<(const time_spec_t &, const time_spec_t &); + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_TIME_SPEC_HPP */ diff --git a/host/include/uhd/types/tune_request.hpp b/host/include/uhd/types/tune_request.hpp new file mode 100644 index 000000000..942b93251 --- /dev/null +++ b/host/include/uhd/types/tune_request.hpp @@ -0,0 +1,95 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_TUNE_REQUEST_HPP +#define INCLUDED_UHD_TYPES_TUNE_REQUEST_HPP + +#include <uhd/config.hpp> + +namespace uhd{ + + /*! + * A tune request instructs the implementation how to tune the RF chain. + * The policies can be used to select automatic tuning or + * fined control over the daughterboard IF and DSP tuning. + * Not all combinations of policies are applicable. + * Convenience constructors are supplied for most use cases. + */ + struct UHD_API tune_request_t{ + /*! + * Make a new tune request for a particular center frequency. + * Use an automatic policy for the intermediate and DSP frequency + * to tune the chain as close as possible to the target frequency. + * \param target_freq the target frequency in Hz + */ + tune_request_t(double target_freq = 0); + + /*! + * Make a new tune request for a particular center frequency. + * Use a manual policy for the intermediate frequency, + * and an automatic policy for the DSP frequency, + * to tune the chain as close as possible to the target frequency. + * \param target_freq the target frequency in Hz + * \param lo_off the LO offset frequency in Hz + */ + tune_request_t(double target_freq, double lo_off); + + //! Policy options for tunable elements in the RF chain. + enum policy_t { + //! Do not set this argument, use current setting. + POLICY_NONE = 'N', + //! Automatically determine the argument's value. + POLICY_AUTO = 'A', + //! Use the argument's value for the setting. + POLICY_MANUAL = 'M' + }; + + /*! + * The target frequency of the overall chain in Hz. + * Set this even if all policies are set to manual. + */ + double target_freq; + + /*! + * The policy for the intermediate frequency. + * Automatic behavior: the target frequency + default LO offset. + */ + policy_t inter_freq_policy; + + /*! + * The intermediate frequency in Hz. + * Set when the policy is set to manual. + */ + double inter_freq; + + /*! + * The policy for the DSP frequency. + * Automatic behavior: the difference between the target and IF. + */ + policy_t dsp_freq_policy; + + /*! + * The DSP frequency in Hz. + * Set when the policy is set to manual. + */ + double dsp_freq; + + }; + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_TUNE_REQUEST_HPP */ diff --git a/host/include/uhd/types/tune_result.hpp b/host/include/uhd/types/tune_result.hpp new file mode 100644 index 000000000..9eebc161a --- /dev/null +++ b/host/include/uhd/types/tune_result.hpp @@ -0,0 +1,48 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_TUNE_RESULT_HPP +#define INCLUDED_UHD_TYPES_TUNE_RESULT_HPP + +#include <uhd/config.hpp> +#include <string> + +namespace uhd{ + + /*! + * The tune result struct holds result of a 2-phase tuning: + * The struct hold the result of tuning the dboard as + * the target and actual intermediate frequency. + * The struct hold the result of tuning the DSP as + * the target and actual digital converter frequency. + */ + struct UHD_API tune_result_t{ + double target_inter_freq; + double actual_inter_freq; + double target_dsp_freq; + double actual_dsp_freq; + + /*! + * Create a pretty print string for this tune result struct. + * \return the printable string + */ + std::string to_pp_string(void) const; + }; + +} //namespace uhd + +#endif /* INCLUDED_UHD_TYPES_TUNE_RESULT_HPP */ diff --git a/host/include/uhd/usrp/CMakeLists.txt b/host/include/uhd/usrp/CMakeLists.txt new file mode 100644 index 000000000..59a1302af --- /dev/null +++ b/host/include/uhd/usrp/CMakeLists.txt @@ -0,0 +1,49 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + + +INSTALL(FILES + #### props headers ### + codec_props.hpp + dboard_props.hpp + device_props.hpp + dsp_props.hpp + mboard_props.hpp + subdev_props.hpp + + #### dboard headers ### + dboard_base.hpp + dboard_eeprom.hpp + dboard_id.hpp + dboard_iface.hpp + dboard_manager.hpp + + ### utilities ### + dsp_utils.hpp + gps_ctrl.hpp + mboard_eeprom.hpp + misc_utils.hpp + subdev_spec.hpp + tune_helper.hpp + + ### interfaces ### + single_usrp.hpp + multi_usrp.hpp + mboard_iface.hpp + + DESTINATION ${INCLUDE_DIR}/uhd/usrp +) diff --git a/host/include/uhd/usrp/codec_props.hpp b/host/include/uhd/usrp/codec_props.hpp new file mode 100644 index 000000000..b0a79e3f6 --- /dev/null +++ b/host/include/uhd/usrp/codec_props.hpp @@ -0,0 +1,42 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_CODEC_PROPS_HPP +#define INCLUDED_UHD_USRP_CODEC_PROPS_HPP + +#include <uhd/utils/props.hpp> + +namespace uhd{ namespace usrp{ + + /*! + * Possible device codec properties: + * A codec is expected to have a rate and gain elements. + * Other properties can be discovered through the others prop. + */ + enum codec_prop_t{ + CODEC_PROP_NAME, //ro, std::string + CODEC_PROP_OTHERS, //ro, prop_names_t + CODEC_PROP_GAIN_I, //rw, double + CODEC_PROP_GAIN_Q , //rw, double + CODEC_PROP_GAIN_RANGE, //ro, gain_range_t + CODEC_PROP_GAIN_NAMES //ro, prop_names_t + }; + + +}} //namespace + +#endif /* INCLUDED_UHD_USRP_CODEC_PROPS_HPP */ diff --git a/host/include/uhd/usrp/dboard_base.hpp b/host/include/uhd/usrp/dboard_base.hpp new file mode 100644 index 000000000..9b75d791f --- /dev/null +++ b/host/include/uhd/usrp/dboard_base.hpp @@ -0,0 +1,117 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_DBOARD_BASE_HPP +#define INCLUDED_UHD_USRP_DBOARD_BASE_HPP + +#include <uhd/config.hpp> +#include <uhd/wax.hpp> +#include <uhd/utils/pimpl.hpp> +#include <boost/utility.hpp> +#include <boost/shared_ptr.hpp> +#include <uhd/usrp/dboard_id.hpp> +#include <uhd/usrp/dboard_iface.hpp> + +namespace uhd{ namespace usrp{ + +/*! + * A daughter board dboard_base class for all dboards. + * Only other dboard dboard_base classes should inherit this. + */ +class UHD_API dboard_base : boost::noncopyable{ +public: + typedef boost::shared_ptr<dboard_base> sptr; + /*! + * An opaque type for the dboard constructor args. + * Derived classes should pass the args into the base class, + * but should not deal with the internals of the args. + */ + typedef void * ctor_args_t; + + //structors + dboard_base(ctor_args_t); + virtual ~dboard_base(void); + + //interface + virtual void rx_get(const wax::obj &key, wax::obj &val) = 0; + virtual void rx_set(const wax::obj &key, const wax::obj &val) = 0; + virtual void tx_get(const wax::obj &key, wax::obj &val) = 0; + virtual void tx_set(const wax::obj &key, const wax::obj &val) = 0; + +protected: + std::string get_subdev_name(void); + dboard_iface::sptr get_iface(void); + dboard_id_t get_rx_id(void); + dboard_id_t get_tx_id(void); + +private: + UHD_PIMPL_DECL(impl) _impl; +}; + +/*! + * A xcvr daughter board implements rx and tx methods + * Sub classes for xcvr boards should inherit this. + */ +class UHD_API xcvr_dboard_base : public dboard_base{ +public: + /*! + * Create a new xcvr dboard object, override in subclasses. + */ + xcvr_dboard_base(ctor_args_t); + + virtual ~xcvr_dboard_base(void); +}; + +/*! + * A rx daughter board only implements rx methods. + * Sub classes for rx-only boards should inherit this. + */ +class UHD_API rx_dboard_base : public dboard_base{ +public: + /*! + * Create a new rx dboard object, override in subclasses. + */ + rx_dboard_base(ctor_args_t); + + virtual ~rx_dboard_base(void); + + //override here so the derived classes cannot + void tx_get(const wax::obj &key, wax::obj &val); + void tx_set(const wax::obj &key, const wax::obj &val); +}; + +/*! + * A tx daughter board only implements tx methods. + * Sub classes for rx-only boards should inherit this. + */ +class UHD_API tx_dboard_base : public dboard_base{ +public: + /*! + * Create a new rx dboard object, override in subclasses. + */ + tx_dboard_base(ctor_args_t); + + virtual ~tx_dboard_base(void); + + //override here so the derived classes cannot + void rx_get(const wax::obj &key, wax::obj &val); + void rx_set(const wax::obj &key, const wax::obj &val); +}; + +}} //namespace + +#endif /* INCLUDED_UHD_USRP_DBOARD_BASE_HPP */ diff --git a/host/include/uhd/usrp/dboard_eeprom.hpp b/host/include/uhd/usrp/dboard_eeprom.hpp new file mode 100644 index 000000000..394d71dd6 --- /dev/null +++ b/host/include/uhd/usrp/dboard_eeprom.hpp @@ -0,0 +1,59 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_DBOARD_EEPROM_HPP +#define INCLUDED_UHD_USRP_DBOARD_EEPROM_HPP + +#include <uhd/config.hpp> +#include <uhd/usrp/dboard_id.hpp> +#include <uhd/types/serial.hpp> +#include <string> + +namespace uhd{ namespace usrp{ + +struct UHD_API dboard_eeprom_t{ + + //! The ID for the daughterboard type + dboard_id_t id; + + //! The unique serial number + std::string serial; + + /*! + * Create an empty dboard eeprom struct. + */ + dboard_eeprom_t(void); + + /*! + * Load the object with bytes from the eeprom. + * \param iface the serial interface with i2c + * \param addr the i2c address for the eeprom + */ + void load(i2c_iface &iface, boost::uint8_t addr); + + /*! + * Store the object to bytes in the eeprom. + * \param iface the serial interface with i2c + * \param addr the i2c address for the eeprom + */ + void store(i2c_iface &iface, boost::uint8_t addr); + +}; + +}} //namespace + +#endif /* INCLUDED_UHD_USRP_DBOARD_EEPROM_HPP */ diff --git a/host/include/uhd/usrp/dboard_id.hpp b/host/include/uhd/usrp/dboard_id.hpp new file mode 100644 index 000000000..1fda8182e --- /dev/null +++ b/host/include/uhd/usrp/dboard_id.hpp @@ -0,0 +1,96 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_DBOARD_ID_HPP +#define INCLUDED_UHD_USRP_DBOARD_ID_HPP + +#include <uhd/config.hpp> +#include <boost/cstdint.hpp> +#include <boost/operators.hpp> +#include <string> + +namespace uhd{ namespace usrp{ + + class UHD_API dboard_id_t : boost::equality_comparable<dboard_id_t>{ + public: + /*! + * Create a dboard id from an integer. + * \param id the integer representation + */ + dboard_id_t(boost::uint16_t id = 0xffff); + + /*! + * Obtain a dboard id that represents no dboard. + * \return the dboard id with the 0xffff id. + */ + static dboard_id_t none(void); + + /*! + * Create a new dboard id from an integer representation. + * \param uint16 an unsigned 16 bit integer + * \return a new dboard id containing the integer + */ + static dboard_id_t from_uint16(boost::uint16_t uint16); + + /*! + * Get the dboard id represented as an integer. + * \return an unsigned 16 bit integer representation + */ + boost::uint16_t to_uint16(void) const; + + /*! + * Create a new dboard id from a string representation. + * If the string has a 0x prefix, it will be parsed as hex. + * \param string a numeric string, possibly hex + * \return a new dboard id containing the integer + */ + static dboard_id_t from_string(const std::string &string); + + /*! + * Get the dboard id represented as an integer. + * \return a hex string representation with 0x prefix + */ + std::string to_string(void) const; + + /*! + * Get the dboard id represented as a canonical name. + * \return the canonical string representation + */ + std::string to_cname(void) const; + + /*! + * Get the pretty print representation of this dboard id. + * \return a string with the dboard name and id number + */ + std::string to_pp_string(void) const; + + private: + boost::uint16_t _id; //internal representation + }; + + /*! + * Comparator operator overloaded for dboard ids. + * The boost::equality_comparable provides the !=. + * \param lhs the dboard id to the left of the operator + * \param rhs the dboard id to the right of the operator + * \return true when the dboard ids are equal + */ + UHD_API bool operator==(const dboard_id_t &lhs, const dboard_id_t &rhs); + +}} //namespace + +#endif /* INCLUDED_UHD_USRP_DBOARD_ID_HPP */ diff --git a/host/include/uhd/usrp/dboard_iface.hpp b/host/include/uhd/usrp/dboard_iface.hpp new file mode 100644 index 000000000..c5898365d --- /dev/null +++ b/host/include/uhd/usrp/dboard_iface.hpp @@ -0,0 +1,315 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_DBOARD_IFACE_HPP +#define INCLUDED_UHD_USRP_DBOARD_IFACE_HPP + +#include <uhd/config.hpp> +#include <uhd/utils/pimpl.hpp> +#include <uhd/types/serial.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/cstdint.hpp> +#include <string> +#include <vector> + +namespace uhd{ namespace usrp{ + +//! Special properties that differentiate this daughterboard slot +struct UHD_API dboard_iface_special_props_t{ + /*! + * Soft clock divider: + * When a motherboard cannot provided a divided dboard clock, + * it may provided a "soft" divided clock over an FPGA GPIO. + * The implementation must know the type of clock provided. + */ + bool soft_clock_divider; + + /*! + * Mangle i2c addresses: + * When i2c is shared across multiple daugterboard slots, + * the i2c addresses will be mangled on the secondary slot + * to avoid conflicts between slots in the i2c address space. + * The mangling is daguhterboard specific so the implementation + * needs to know whether it should use mangled addresses or not. + */ + bool mangle_i2c_addrs; +}; + +/*! + * The daughter board dboard interface to be subclassed. + * A dboard instance interfaces with the mboard though this api. + * This interface provides i2c, spi, gpio, atr, aux dac/adc access. + * Each mboard should have a specially tailored iface for its dboard. + */ +class UHD_API dboard_iface{ +public: + typedef boost::shared_ptr<dboard_iface> sptr; + typedef dboard_iface_special_props_t special_props_t; + + //! tells the host which unit to use + enum unit_t{ + UNIT_RX = 'r', + UNIT_TX = 't' + }; + + //! possible atr registers + enum atr_reg_t{ + ATR_REG_IDLE = 'i', + ATR_REG_TX_ONLY = 't', + ATR_REG_RX_ONLY = 'r', + ATR_REG_FULL_DUPLEX = 'f' + }; + + //! aux dac selection enums (per unit) + enum aux_dac_t{ + AUX_DAC_A = 'a', + AUX_DAC_B = 'b', + AUX_DAC_C = 'c', + AUX_DAC_D = 'd' + }; + + //! aux adc selection enums (per unit) + enum aux_adc_t{ + AUX_ADC_A = 'a', + AUX_ADC_B = 'b' + }; + + /*! + * Get special properties information for this dboard slot. + * This call helps the dboard code to handle implementation + * differences between different motherboards and dboard slots. + * \return the special properties struct + */ + virtual special_props_t get_special_props(void) = 0; + + /*! + * Write to an aux dac. + * + * \param unit which unit rx or tx + * \param which_dac the dac index 0, 1, 2, 3... + * \param value the value in volts + */ + virtual void write_aux_dac(unit_t unit, aux_dac_t which_dac, double value) = 0; + + /*! + * Read from an aux adc. + * + * \param unit which unit rx or tx + * \param which_adc the adc index 0, 1, 2, 3... + * \return the value in volts + */ + virtual double read_aux_adc(unit_t unit, aux_adc_t which_adc) = 0; + + /*! + * Set a daughterboard output pin control source. + * + * \param unit which unit rx or tx + * \param value 16-bits, 0=GPIO controlled, 1=ATR controlled + * \param mask 16-bits, 0=do not change, 1=change value + */ + virtual void set_pin_ctrl( + unit_t unit, boost::uint16_t value, boost::uint16_t mask = 0xffff + ); + + /*! + * Read back the pin control setting. + * + * \param unit which unit rx or tx + * \return the 16-bit settings value + */ + virtual boost::uint16_t get_pin_ctrl(unit_t unit); + + /*! + * Set a daughterboard ATR register. + * + * \param unit which unit rx or tx + * \param reg which ATR register + * \param value 16-bits, 0=ATR output low, 1=ATR output high + * \param mask 16-bits, 0=do not change, 1=change value + */ + virtual void set_atr_reg( + unit_t unit, atr_reg_t reg, boost::uint16_t value, boost::uint16_t mask = 0xffff + ); + + /*! + * Read back an ATR register setting. + * + * \param unit which unit rx or tx + * \param reg which ATR register + * \return the 16-bit settings value + */ + virtual boost::uint16_t get_atr_reg(unit_t unit, atr_reg_t reg); + + /*! + * Set daughterboard GPIO data direction setting. + * + * \param unit which unit rx or tx + * \param value 16-bits, 0=GPIO input, 1=GPIO output + * \param mask 16-bits, 0=do not change, 1=change value + */ + virtual void set_gpio_ddr( + unit_t unit, boost::uint16_t value, boost::uint16_t mask = 0xffff + ); + + /*! + * Read back the GPIO data direction setting. + * + * \param unit which unit rx or tx + * \return the 16-bit settings value + */ + virtual boost::uint16_t get_gpio_ddr(unit_t unit); + + /*! + * Set daughterboard GPIO pin output setting. + * + * \param unit which unit rx or tx + * \param value 16-bits, 0=GPIO output low, 1=GPIO output high + * \param mask 16-bits, 0=do not change, 1=change value + */ + virtual void set_gpio_out( + unit_t unit, boost::uint16_t value, boost::uint16_t mask = 0xffff + ); + + /*! + * Read back the GPIO pin output setting. + * + * \param unit which unit rx or tx + * \return the 16-bit settings value + */ + virtual boost::uint16_t get_gpio_out(unit_t unit); + + /*! + * Setup the GPIO debug mux. + * + * \param unit which unit rx or tx + * \param which which debug: 0, 1 + */ + virtual void set_gpio_debug(unit_t unit, int which) = 0; + + /*! + * Read daughterboard GPIO pin values. + * + * \param unit which unit rx or tx + * \return the value of the gpio unit + */ + virtual boost::uint16_t read_gpio(unit_t unit) = 0; + + /*! + * Write to an I2C peripheral. + * + * \param addr I2C bus address (7-bits) + * \param bytes the data to write + */ + virtual void write_i2c(boost::uint8_t addr, const byte_vector_t &bytes) = 0; + + /*! + * Read from an I2C peripheral. + * + * \param addr I2C bus address (7-bits) + * \param num_bytes number of bytes to read + * \return the data read if successful, else a zero length string. + */ + virtual byte_vector_t read_i2c(boost::uint8_t addr, size_t num_bytes) = 0; + + /*! + * Write data to SPI bus peripheral. + * + * \param unit which unit, rx or tx + * \param config configuration settings + * \param data the bits to write LSB first + * \param num_bits the number of bits in data + */ + virtual void write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits + ) = 0; + + /*! + * Read and write data to SPI bus peripheral. + * + * \param unit which unit, rx or tx + * \param config configuration settings + * \param data the bits to write LSB first + * \param num_bits the number of bits in data + * \return the data that was read + */ + virtual boost::uint32_t read_write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits + ) = 0; + + /*! + * Set the rate of a dboard clock. + * + * \param unit which unit rx or tx + * \param rate the clock rate in Hz + */ + virtual void set_clock_rate(unit_t unit, double rate) = 0; + + /*! + * Get the rate of a dboard clock. + * + * \param unit which unit rx or tx + * \return the clock rate in Hz + */ + virtual double get_clock_rate(unit_t unit) = 0; + + /*! + * Get a list of possible rates for the dboard clock. + * + * \param unit which unit rx or tx + * \return a list of clock rates in Hz + */ + virtual std::vector<double> get_clock_rates(unit_t unit) = 0; + + /*! + * Enable or disable a dboard clock. + * + * \param unit which unit rx or tx + * \param enb true for enabled + */ + virtual void set_clock_enabled(unit_t unit, bool enb) = 0; + + /*! + * Get the rate of the codec. + * For rx, this is the rate the ADC feeds the DSP. + * For tx, this is the rate the DSP feeds the DAC. + * \param unit which unit rx or tx + * \return the codec rate in Hz + */ + virtual double get_codec_rate(unit_t unit) = 0; + +private: + UHD_PIMPL_DECL(impl) _impl; + + virtual void _set_pin_ctrl(unit_t unit, boost::uint16_t value) = 0; + virtual void _set_atr_reg(unit_t unit, atr_reg_t reg, boost::uint16_t value) = 0; + virtual void _set_gpio_ddr(unit_t unit, boost::uint16_t value) = 0; + virtual void _set_gpio_out(unit_t unit, boost::uint16_t value) = 0; + +protected: + dboard_iface(void); + +}; + +}} //namespace + +#endif /* INCLUDED_UHD_USRP_DBOARD_IFACE_HPP */ diff --git a/host/include/uhd/usrp/dboard_manager.hpp b/host/include/uhd/usrp/dboard_manager.hpp new file mode 100644 index 000000000..3c41c65a8 --- /dev/null +++ b/host/include/uhd/usrp/dboard_manager.hpp @@ -0,0 +1,96 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_DBOARD_MANAGER_HPP +#define INCLUDED_UHD_USRP_DBOARD_MANAGER_HPP + +#include <uhd/config.hpp> +#include <uhd/utils/props.hpp> +#include <uhd/usrp/dboard_base.hpp> +#include <uhd/usrp/dboard_id.hpp> +#include <boost/utility.hpp> +#include <boost/shared_ptr.hpp> + +namespace uhd{ namespace usrp{ + +/*! + * A daughter board subdev dboard_manager class. + * Create subdev instances for each subdev on a dboard. + * Provide wax::obj access to the subdevs inside. + */ +class UHD_API dboard_manager : boost::noncopyable{ +public: + typedef boost::shared_ptr<dboard_manager> sptr; + + //dboard constructor (each dboard should have a ::make with this signature) + typedef dboard_base::sptr(*dboard_ctor_t)(dboard_base::ctor_args_t); + + /*! + * Register a rx or tx dboard into the system. + * For single subdevice boards, omit subdev_names. + * \param dboard_id the dboard id (rx or tx) + * \param dboard_ctor the dboard constructor function pointer + * \param name the canonical name for the dboard represented + * \param subdev_names the names of the subdevs on this dboard + */ + static void register_dboard( + const dboard_id_t &dboard_id, + dboard_ctor_t dboard_ctor, + const std::string &name, + const prop_names_t &subdev_names = prop_names_t(1, "0") + ); + + /*! + * Register an xcvr dboard into the system. + * For single subdevice boards, omit subdev_names. + * \param rx_dboard_id the rx unit dboard id + * \param tx_dboard_id the tx unit dboard id + * \param dboard_ctor the dboard constructor function pointer + * \param name the canonical name for the dboard represented + * \param subdev_names the names of the subdevs on this dboard + */ + static void register_dboard( + const dboard_id_t &rx_dboard_id, + const dboard_id_t &tx_dboard_id, + dboard_ctor_t dboard_ctor, + const std::string &name, + const prop_names_t &subdev_names = prop_names_t(1, "0") + ); + + /*! + * Make a new dboard manager. + * \param rx_dboard_id the id of the rx dboard + * \param tx_dboard_id the id of the tx dboard + * \param iface the custom dboard interface + * \return an sptr to the new dboard manager + */ + static sptr make( + dboard_id_t rx_dboard_id, + dboard_id_t tx_dboard_id, + dboard_iface::sptr iface + ); + + //dboard manager interface + virtual prop_names_t get_rx_subdev_names(void) = 0; + virtual prop_names_t get_tx_subdev_names(void) = 0; + virtual wax::obj get_rx_subdev(const std::string &subdev_name) = 0; + virtual wax::obj get_tx_subdev(const std::string &subdev_name) = 0; +}; + +}} //namespace + +#endif /* INCLUDED_UHD_USRP_DBOARD_MANAGER_HPP */ diff --git a/host/include/uhd/usrp/dboard_props.hpp b/host/include/uhd/usrp/dboard_props.hpp new file mode 100644 index 000000000..35721ab47 --- /dev/null +++ b/host/include/uhd/usrp/dboard_props.hpp @@ -0,0 +1,42 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_DBOARD_PROPS_HPP +#define INCLUDED_UHD_USRP_DBOARD_PROPS_HPP + +#include <uhd/utils/props.hpp> + +namespace uhd{ namespace usrp{ + + /*! + * Possible device dboard properties: + * A dboard has an id, one or more subdevices, and a codec. + * A dboard is considered to be unidirectional (RX or TX). + */ + enum dboard_prop_t{ + DBOARD_PROP_NAME, //ro, std::string + DBOARD_PROP_SUBDEV, //ro, wax::obj + DBOARD_PROP_SUBDEV_NAMES, //ro, prop_names_t + DBOARD_PROP_DBOARD_EEPROM, //rw, dboard_eeprom_t + DBOARD_PROP_DBOARD_IFACE, //ro, dboard_iface::sptr + DBOARD_PROP_CODEC, //ro, wax::obj + DBOARD_PROP_GAIN_GROUP //ro, gain_group + }; + +}} //namespace + +#endif /* INCLUDED_UHD_USRP_DBOARD_PROPS_HPP */ diff --git a/host/include/uhd/usrp/device_props.hpp b/host/include/uhd/usrp/device_props.hpp new file mode 100644 index 000000000..3c8f7e225 --- /dev/null +++ b/host/include/uhd/usrp/device_props.hpp @@ -0,0 +1,39 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_DEVICE_PROPS_HPP +#define INCLUDED_UHD_USRP_DEVICE_PROPS_HPP + +#include <uhd/utils/props.hpp> + +namespace uhd{ namespace usrp{ + + /*! + * Possible device properties: + * In general, a device will have a single mboard. + * In certain mimo applications, multiple boards + * will be present in the interface for configuration. + */ + enum device_prop_t{ + DEVICE_PROP_NAME, //ro, std::string + DEVICE_PROP_MBOARD, //ro, wax::obj + DEVICE_PROP_MBOARD_NAMES, //ro, prop_names_t + }; + +}} //namespace + +#endif /* INCLUDED_UHD_USRP_DEVICE_PROPS_HPP */ diff --git a/host/include/uhd/usrp/dsp_props.hpp b/host/include/uhd/usrp/dsp_props.hpp new file mode 100644 index 000000000..e68e11deb --- /dev/null +++ b/host/include/uhd/usrp/dsp_props.hpp @@ -0,0 +1,50 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_DSP_PROPS_HPP +#define INCLUDED_UHD_USRP_DSP_PROPS_HPP + +#include <uhd/utils/props.hpp> + +namespace uhd{ namespace usrp{ + + /*! + * Possible device dsp properties: + * A dsp is a black box fpga component found between + * the over-the-wire data and the codec pins. + * + * The host rate can be modified to control resampling. + * Resampling can take the form of decimation, interpolation, + * or more complex fractional resampling techniques. + * As usual, read back the host rate after setting it + * to get the actual rate that was set (implementation dependent). + * + * A dsp can also shift the digital stream in frequency. + * Set the shift property and read it back to get actual shift. + */ + enum dsp_prop_t{ + DSP_PROP_NAME, //ro, std::string + DSP_PROP_OTHERS, //ro, prop_names_t + DSP_PROP_STREAM_CMD, //wo, stream_cmd_t + DSP_PROP_FREQ_SHIFT, //rw, double Hz + DSP_PROP_CODEC_RATE, //ro, double Sps + DSP_PROP_HOST_RATE //rw, double Sps + }; + +}} //namespace + +#endif /* INCLUDED_UHD_USRP_DSP_PROPS_HPP */ diff --git a/host/include/uhd/usrp/dsp_utils.hpp b/host/include/uhd/usrp/dsp_utils.hpp new file mode 100644 index 000000000..5b81ce322 --- /dev/null +++ b/host/include/uhd/usrp/dsp_utils.hpp @@ -0,0 +1,96 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_DSP_UTILS_HPP +#define INCLUDED_UHD_USRP_DSP_UTILS_HPP + +#include <uhd/config.hpp> +#include <uhd/types/stream_cmd.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <boost/cstdint.hpp> + +namespace uhd{ namespace usrp{ + +namespace dsp_type1{ + + /*! + * Calculate the rx mux word from properties. + * \param subdev_conn the subdev connection type + * \return the 32-bit rx mux control word + */ + UHD_API boost::uint32_t calc_rx_mux_word(subdev_conn_t subdev_conn); + + /*! + * Calculate the tx mux word from properties. + * \param subdev_conn the subdev connection type + * \return the 32-bit tx mux control word + */ + UHD_API boost::uint32_t calc_tx_mux_word(subdev_conn_t subdev_conn); + + /*! + * Calculate the cordic word from the frequency and clock rate. + * The frequency will be set to the actual (possible) frequency. + * + * \param freq the requested frequency in Hz + * \param codec_rate the dsp codec rate in Hz + * \return the 32-bit cordic control word + */ + UHD_API boost::uint32_t calc_cordic_word_and_update( + double &freq, double codec_rate + ); + + /*! + * Calculate the CIC filter word from the rate. + * Check if requested decim/interp rate is: + * multiple of 4, enable two halfband filters + * multiple of 2, enable one halfband filter + * handle remainder in CIC + * + * \param rate the requested rate in Sps + * \return the 32-bit cic filter control word + */ + UHD_API boost::uint32_t calc_cic_filter_word(unsigned rate); + + /*! + * Calculate the IQ scale factor word from I and Q components. + * \param i the I component of the scalar + * \param q the Q component of the scalar + * \return the 32-bit scale factor control word + */ + UHD_API boost::uint32_t calc_iq_scale_word( + boost::int16_t i, boost::int16_t q + ); + + /*! + * Calculate the IQ scale factor word from the rate. + * \param rate the requested rate in Sps + * \return the 32-bit scale factor control word + */ + UHD_API boost::uint32_t calc_iq_scale_word(unsigned rate); + + /*! + * Calculate the stream command word from the stream command struct. + * \param stream_cmd the requested stream command with mode, flags, timestamp + * \return the 32-bit stream command word + */ + UHD_API boost::uint32_t calc_stream_cmd_word(const stream_cmd_t &stream_cmd); + +} //namespace dsp_type1 + +}} //namespace + +#endif /* INCLUDED_UHD_USRP_DSP_UTILS_HPP */ diff --git a/host/include/uhd/usrp/gps_ctrl.hpp b/host/include/uhd/usrp/gps_ctrl.hpp new file mode 100644 index 000000000..74f984ee0 --- /dev/null +++ b/host/include/uhd/usrp/gps_ctrl.hpp @@ -0,0 +1,56 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_GPS_CTRL_HPP +#define INCLUDED_GPS_CTRL_HPP + +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include <boost/function.hpp> +#include <boost/date_time/posix_time/posix_time_types.hpp> + +using namespace boost::posix_time; + +typedef boost::function<void(std::string)> gps_send_fn_t; +typedef boost::function<std::string(void)> gps_recv_fn_t; + +class gps_ctrl : boost::noncopyable{ +public: + typedef boost::shared_ptr<gps_ctrl> sptr; + + /*! + * Make a GPS config for Jackson Labs or generic NMEA GPS devices + */ + static sptr make(gps_send_fn_t, gps_recv_fn_t); + + /*! + * Get the current GPS time and date + * \return current GPS time and date as boost::posix_time::ptime object + */ + virtual ptime get_time(void) = 0; + + /*! + * Tell you if there's a supported GPS connected or not + * \return true if a supported GPS is connected + */ + virtual bool gps_detected(void) = 0; + + //TODO: other fun things you can do with a GPS. + +}; + +#endif /* INCLUDED_GPS_CTRL_HPP */ diff --git a/host/include/uhd/usrp/mboard_eeprom.hpp b/host/include/uhd/usrp/mboard_eeprom.hpp new file mode 100644 index 000000000..52363b95c --- /dev/null +++ b/host/include/uhd/usrp/mboard_eeprom.hpp @@ -0,0 +1,65 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_MBOARD_EEPROM_HPP +#define INCLUDED_UHD_USRP_MBOARD_EEPROM_HPP + +#include <uhd/config.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/types/serial.hpp> +#include <string> + +namespace uhd{ namespace usrp{ + + /*! + * The motherboard EEPROM object: + * Knows how to read and write the EEPROM for various USRPs. + * The class inherits from a string, string dictionary. + * Use the dictionary interface to get and set values. + * Commit to the EEPROM to save changed settings. + */ + struct UHD_API mboard_eeprom_t : uhd::dict<std::string, std::string>{ + + //! Possible EEPROM maps types + enum map_type{ + MAP_N100, + MAP_B000, + MAP_E100 + }; + + //! Make a new empty mboard eeprom + mboard_eeprom_t(void); + + /*! + * Make a new mboard EEPROM handler. + * \param iface the interface to i2c + * \param map the map type enum + */ + mboard_eeprom_t(i2c_iface &iface, map_type map); + + /*! + * Write the contents of this object to the EEPROM. + * \param iface the interface to i2c + * \param map the map type enum + */ + void commit(i2c_iface &iface, map_type map); + + }; + +}} //namespace + +#endif /* INCLUDED_UHD_USRP_MBOARD_EEPROM_HPP */ diff --git a/host/include/uhd/usrp/mboard_iface.hpp b/host/include/uhd/usrp/mboard_iface.hpp new file mode 100644 index 000000000..784fbc7c5 --- /dev/null +++ b/host/include/uhd/usrp/mboard_iface.hpp @@ -0,0 +1,85 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_MBOARD_IFACE_HPP +#define INCLUDED_UHD_USRP_MBOARD_IFACE_HPP + +#include <uhd/types/serial.hpp> +#include <uhd/usrp/mboard_eeprom.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include <boost/cstdint.hpp> +#include <utility> +#include <string> + +namespace uhd{ namespace usrp{ + +/*! + * The mboard interface class: + * Provides a set of functions to implementation layer. + * Including spi, peek, poke, control... + */ +class mboard_iface : public uhd::i2c_iface, public uhd::spi_iface { +public: + typedef boost::shared_ptr<mboard_iface> sptr; + /*! + * Write a register (32 bits) + * \param addr the address + * \param data the 32bit data + */ + virtual void poke32(boost::uint32_t addr, boost::uint32_t data) = 0; + + /*! + * Read a register (32 bits) + * \param addr the address + * \return the 32bit data + */ + virtual boost::uint32_t peek32(boost::uint32_t addr) = 0; + + /*! + * Write a register (16 bits) + * \param addr the address + * \param data the 16bit data + */ + virtual void poke16(boost::uint32_t addr, boost::uint16_t data) = 0; + + /*! + * Read a register (16 bits) + * \param addr the address + * \return the 16bit data + */ + virtual boost::uint16_t peek16(boost::uint32_t addr) = 0; + + /*! + * Write to a serial port. + * \param dev which UART to write to + * \param buf the data to write + */ + virtual void write_uart(boost::uint8_t dev, const std::string &buf) = 0; + + /*! + * Read from a serial port. + * \param dev which UART to read from + * \return the data read from the serial port + */ + virtual std::string read_uart(boost::uint8_t dev) = 0; + +}; + +}} + +#endif //INCLUDED_UHD_USRP_DBOARD_IFACE_HPP diff --git a/host/include/uhd/usrp/mboard_props.hpp b/host/include/uhd/usrp/mboard_props.hpp new file mode 100644 index 000000000..a2580954e --- /dev/null +++ b/host/include/uhd/usrp/mboard_props.hpp @@ -0,0 +1,56 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_MBOARD_PROPS_HPP +#define INCLUDED_UHD_USRP_MBOARD_PROPS_HPP + +#include <uhd/utils/props.hpp> + +namespace uhd{ namespace usrp{ + + /*! + * Possible device mboard properties: + * The general mboard properties are listed below. + * Custom properties can be identified with a string + * and discovered though the others property. + */ + enum mboard_prop_t{ + MBOARD_PROP_NAME, //ro, std::string + MBOARD_PROP_OTHERS, //ro, prop_names_t + MBOARD_PROP_SENSOR, //ro, sensor_value_t + MBOARD_PROP_SENSOR_NAMES, //ro, prop_names_t + MBOARD_PROP_CLOCK_RATE, //rw, double + MBOARD_PROP_RX_DSP, //ro, wax::obj + MBOARD_PROP_RX_DSP_NAMES, //ro, prop_names_t + MBOARD_PROP_TX_DSP, //ro, wax::obj + MBOARD_PROP_TX_DSP_NAMES, //ro, prop_names_t + MBOARD_PROP_RX_DBOARD, //ro, wax::obj + MBOARD_PROP_RX_DBOARD_NAMES, //ro, prop_names_t + MBOARD_PROP_TX_DBOARD, //ro, wax::obj + MBOARD_PROP_TX_DBOARD_NAMES, //ro, prop_names_t + MBOARD_PROP_RX_SUBDEV_SPEC, //rw, subdev_spec_t + MBOARD_PROP_TX_SUBDEV_SPEC, //rw, subdev_spec_t + MBOARD_PROP_CLOCK_CONFIG, //rw, clock_config_t + MBOARD_PROP_TIME_NOW, //rw, time_spec_t + MBOARD_PROP_TIME_PPS, //wo, time_spec_t + MBOARD_PROP_EEPROM_MAP, //wr, mboard_eeprom_t + MBOARD_PROP_IFACE, //ro, mboard_iface::sptr + }; + +}} //namespace + +#endif /* INCLUDED_UHD_USRP_MBOARD_PROPS_HPP */ diff --git a/host/include/uhd/usrp/misc_utils.hpp b/host/include/uhd/usrp/misc_utils.hpp new file mode 100644 index 000000000..37860a1a5 --- /dev/null +++ b/host/include/uhd/usrp/misc_utils.hpp @@ -0,0 +1,71 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_MISC_UTILS_HPP +#define INCLUDED_UHD_USRP_MISC_UTILS_HPP + +#include <uhd/config.hpp> +#include <uhd/wax.hpp> +#include <uhd/usrp/dboard_id.hpp> +#include <uhd/usrp/subdev_spec.hpp> +#include <uhd/utils/gain_group.hpp> + +namespace uhd{ namespace usrp{ + + /*! + * Different policies for gain group prioritization. + */ + enum gain_group_policy_t{ + GAIN_GROUP_POLICY_RX = 'R', + GAIN_GROUP_POLICY_TX = 'T' + }; + + /*! + * Create a gain group that represents the subdevice and its codec. + * \param dboard_id the dboard id for this subdevice + * \param subdev the object with subdevice properties + * \param codec the object with codec properties + * \param gain_group_policy the policy to use + */ + UHD_API gain_group::sptr make_gain_group( + const dboard_id_t &dboard_id, + wax::obj subdev, wax::obj codec, + gain_group_policy_t gain_group_policy + ); + + /*! + * Verify the rx subdevice specification. + * If the subdev spec if empty, automatically fill it. + * \param subdev_spec the subdev spec to verify/fill + * \param mboard the motherboard properties object + * \throw exception when the subdev spec is invalid + */ + UHD_API void verify_rx_subdev_spec(subdev_spec_t &subdev_spec, wax::obj mboard); + + /*! + * Verify the tx subdevice specification. + * If the subdev spec if empty, automatically fill it. + * \param subdev_spec the subdev spec to verify/fill + * \param mboard the motherboard properties object + * \throw exception when the subdev spec is invalid + */ + UHD_API void verify_tx_subdev_spec(subdev_spec_t &subdev_spec, wax::obj mboard); + +}} //namespace + +#endif /* INCLUDED_UHD_USRP_MISC_UTILS_HPP */ + diff --git a/host/include/uhd/usrp/multi_usrp.hpp b/host/include/uhd/usrp/multi_usrp.hpp new file mode 100644 index 000000000..b161d1278 --- /dev/null +++ b/host/include/uhd/usrp/multi_usrp.hpp @@ -0,0 +1,654 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_MULTI_USRP_HPP +#define INCLUDED_UHD_USRP_MULTI_USRP_HPP + +#include <uhd/config.hpp> +#include <uhd/device.hpp> +#include <uhd/types/ranges.hpp> +#include <uhd/types/stream_cmd.hpp> +#include <uhd/types/clock_config.hpp> +#include <uhd/types/tune_request.hpp> +#include <uhd/types/tune_result.hpp> +#include <uhd/types/sensors.hpp> +#include <uhd/usrp/subdev_spec.hpp> +#include <uhd/usrp/dboard_iface.hpp> +#include <uhd/usrp/mboard_iface.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include <vector> + +namespace uhd{ namespace usrp{ + +/*! + * The Multi-USRP device class: + * + * This class facilitates ease-of-use for most use-case scenarios. + * The wrapper provides convenience functions to tune the devices, + * set the dboard gains, antennas, filters, and other properties. + * This class can be used to interface with a single USRP with + * one or more channels, or multiple USRPs in a homogeneous setup. + * All members take an optional parameter for board number or channel number. + * In the single device, single channel case, these parameters can be unspecified. + * + * When using a single device with multiple channels: + * - Channel mapping is determined by the subdevice specifications + * - All channels share a common RX sample rate + * - All channels share a common TX sample rate + * + * When using multiple devices in a configuration: + * - Channel mapping is determined by the device address arguments + * - All boards share a common RX sample rate + * - All boards share a common TX sample rate + * - All boards share a common RX subdevice specification size + * - All boards share a common TX subdevice specification size + * - All boards must have synchronized times (see the set_time_*() calls) + * + * Example to setup channel mapping for multiple devices: + * <pre> + * + * //create a multi_usrp with two boards in the configuration + * device_addr_t dev_addr; + * dev_addr["addr0"] = "192.168.10.2" + * dev_addr["addr1"] = "192.168.10.3"; + * multi_usrp::sptr dev = multi_usrp::make(dev_addr); + * + * //set the board on 10.2 to use the A RX subdevice (RX channel 0) + * dev->set_rx_subdev_spec(":A", 0); + * + * //set the board on 10.3 to use the B RX subdevice (RX channel 1) + * dev->set_rx_subdev_spec(":B", 1); + * + * //set both boards to use the AB TX subdevice (TX channels 0 and 1) + * dev->set_tx_subdev_spec(":AB", multi_usrp::ALL_MBOARDS); + * + * //now that all the channels are mapped, continue with configuration... + * + * </pre> + */ +class UHD_API multi_usrp : boost::noncopyable{ +public: + typedef boost::shared_ptr<multi_usrp> sptr; + + //! A wildcard motherboard index + static const size_t ALL_MBOARDS = size_t(~0); + + //! A wildcard channel index + static const size_t ALL_CHANS = size_t(~0); + + //! A wildcard gain element name + static const std::string ALL_GAINS; + + /*! + * Make a new multi usrp from the device address. + * \param dev_addr the device address + * \return a new single usrp object + */ + static sptr make(const device_addr_t &dev_addr); + + /*! + * Get the underlying device object. + * This is needed to get access to the streaming API and properties. + * \return the device object within this single usrp + */ + virtual device::sptr get_device(void) = 0; + + /******************************************************************* + * Mboard methods + ******************************************************************/ + + /*! + * Set the master clock rate. + * This controls the rate of the clock that feeds the FPGA DSP. + * On some devices, this re-tunes the clock to the specified rate. + * If the specified rate is not available, this method will throw. + * On other devices, this method notifies the software of the rate, + * but requires the the user has made the necessary hardware change. + * \param rate the new master clock rate in Hz + * \param mboard the motherboard index 0 to M-1 + */ + virtual void set_master_clock_rate(double rate, size_t mboard = ALL_MBOARDS) = 0; + + /*! + * Get the master clock rate. + * \param mboard the motherboard index 0 to M-1 + * \return the master clock rate in Hz. + */ + virtual double get_master_clock_rate(size_t mboard = 0) = 0; + + /*! + * Get a printable summary for this USRP configuration. + * \return a printable string + */ + virtual std::string get_pp_string(void) = 0; + + /*! + * Get canonical name for this USRP motherboard. + * \param mboard which motherboard to query + * \return a string representing the name + */ + virtual std::string get_mboard_name(size_t mboard = 0) = 0; + + /*! + * Get the current time in the usrp time registers. + * \param mboard which motherboard to query + * \return a timespec representing current usrp time + */ + virtual time_spec_t get_time_now(size_t mboard = 0) = 0; + + /*! + * Get the time when the last pps pulse occured. + * \param mboard which motherboard to query + * \return a timespec representing the last pps + */ + virtual time_spec_t get_time_last_pps(size_t mboard = 0) = 0; + + /*! + * Sets the time registers on the usrp immediately. + * + * If only one MIMO master is present in your configuration, set_time_now is + * safe to use because the slave's time automatically follows the master's time. + * Otherwise, this call cannot set the time synchronously across multiple devices. + * Please use the set_time_next_pps or set_time_unknown_pps calls with a PPS signal. + * + * \param time_spec the time to latch into the usrp device + * \param mboard the motherboard index 0 to M-1 + */ + virtual void set_time_now(const time_spec_t &time_spec, size_t mboard = ALL_MBOARDS) = 0; + + /*! + * Set the time registers on the usrp at the next pps tick. + * The values will not be latched in until the pulse occurs. + * It is recommended that the user sleep(1) after calling to ensure + * that the time registers will be in a known state prior to use. + * + * Note: Because this call sets the time on the "next" pps, + * the seconds in the time spec should be current seconds + 1. + * + * \param time_spec the time to latch into the usrp device + */ + virtual void set_time_next_pps(const time_spec_t &time_spec) = 0; + + /*! + * Synchronize the times across all motherboards in this configuration. + * Use this method to sync the times when the edge of the PPS is unknown. + * + * Ex: Host machine is not attached to serial port of GPSDO + * and can therefore not query the GPSDO for the PPS edge. + * + * This is a 2-step process, and will take at most 2 seconds to complete. + * Upon completion, the times will be synchronized to the time provided. + * + * - Step1: wait for the last pps time to transition to catch the edge + * - Step2: set the time at the next pps (synchronous for all boards) + * + * \param time_spec the time to latch at the next pps after catching the edge + */ + virtual void set_time_unknown_pps(const time_spec_t &time_spec) = 0; + + /*! + * Are the times across all motherboards in this configuration synchronized? + * Checks that all time registers are approximately close but not exact, + * given that the RTT may varying for a control packet transaction. + * \return true when all motherboards time registers are in sync + */ + virtual bool get_time_synchronized(void) = 0; + + /*! + * Issue a stream command to the usrp device. + * This tells the usrp to send samples into the host. + * See the documentation for stream_cmd_t for more info. + * + * With multiple devices, the first stream command in a chain of commands + * should have a time spec in the near future and stream_now = false; + * to ensure that the packets can be aligned by their time specs. + * + * \param stream_cmd the stream command to issue + * \param chan the channel index 0 to N-1 + */ + virtual void issue_stream_cmd(const stream_cmd_t &stream_cmd, size_t chan = ALL_CHANS) = 0; + + /*! + * Set the clock configuration for the usrp device. + * This tells the usrp how to get a 10Mhz reference and PPS clock. + * See the documentation for clock_config_t for more info. + * \param clock_config the clock configuration to set + * \param mboard which motherboard to set the config + */ + virtual void set_clock_config(const clock_config_t &clock_config, size_t mboard = ALL_MBOARDS) = 0; + + /*! + * Get the number of USRP motherboards in this configuration. + */ + virtual size_t get_num_mboards(void) = 0; + + /*! + * Get a motherboard sensor value. + * \param name the name of the sensor + * \param mboard the motherboard index 0 to M-1 + * \return a sensor value object + */ + virtual sensor_value_t get_mboard_sensor(const std::string &name, size_t mboard = 0) = 0; + + /*! + * Get a list of possible motherboard sensor names. + * \param mboard the motherboard index 0 to M-1 + * \return a vector of sensor names + */ + virtual std::vector<std::string> get_mboard_sensor_names(size_t mboard = 0) = 0; + + /*! + * Get a handle to the mboard_iface object which controls peripheral access. + * \return a mboard_iface::sptr object + */ + virtual mboard_iface::sptr get_mboard_iface(size_t mboard) = 0; + + /******************************************************************* + * RX methods + ******************************************************************/ + /*! + * Set the RX subdevice specification: + * The subdev spec maps a physical part of a daughter-board to a channel number. + * Set the subdev spec before calling into any methods with a channel number. + * The subdev spec must be the same size across all motherboards. + * \param spec the new subdevice specification + * \param mboard the motherboard index 0 to M-1 + */ + virtual void set_rx_subdev_spec(const uhd::usrp::subdev_spec_t &spec, size_t mboard = ALL_MBOARDS) = 0; + + /*! + * Get the RX subdevice specification. + * \param mboard the motherboard index 0 to M-1 + * \return the subdevice specification in use + */ + virtual uhd::usrp::subdev_spec_t get_rx_subdev_spec(size_t mboard = 0) = 0; + + /*! + * Get the number of RX channels in this configuration. + * This is the number of USRPs times the number of RX channels per board, + * where the number of RX channels per board is homogeneous among all USRPs. + */ + virtual size_t get_rx_num_channels(void) = 0; + + /*! + * Get the name of the RX subdevice. + * \param chan the channel index 0 to N-1 + * \return the subdevice name + */ + virtual std::string get_rx_subdev_name(size_t chan = 0) = 0; + + /*! + * Set the RX sample rate. + * \param rate the rate in Sps + * \param chan the channel index 0 to N-1 + */ + virtual void set_rx_rate(double rate, size_t chan = ALL_CHANS) = 0; + + /*! + * Gets the RX sample rate. + * \param chan the channel index 0 to N-1 + * \return the rate in Sps + */ + virtual double get_rx_rate(size_t chan = 0) = 0; + + /*! + * Set the RX center frequency. + * \param tune_request tune request instructions + * \param chan the channel index 0 to N-1 + * \return a tune result object + */ + virtual tune_result_t set_rx_freq( + const tune_request_t &tune_request, size_t chan = 0 + ) = 0; + + /*! + * Get the RX center frequency. + * \param chan the channel index 0 to N-1 + * \return the frequency in Hz + */ + virtual double get_rx_freq(size_t chan = 0) = 0; + + /*! + * Get the RX center frequency range. + * \param chan the channel index 0 to N-1 + * \return a frequency range object + */ + virtual freq_range_t get_rx_freq_range(size_t chan = 0) = 0; + + /*! + * Set the RX gain value for the specified gain element. + * For an empty name, distribute across all gain elements. + * \param gain the gain in dB + * \param name the name of the gain element + * \param chan the channel index 0 to N-1 + */ + virtual void set_rx_gain(double gain, const std::string &name, size_t chan = 0) = 0; + + //! A convenience wrapper for setting overall RX gain + void set_rx_gain(double gain, size_t chan = 0){ + return this->set_rx_gain(gain, ALL_GAINS, chan); + } + + /*! + * Get the RX gain value for the specified gain element. + * For an empty name, sum across all gain elements. + * \param name the name of the gain element + * \param chan the channel index 0 to N-1 + * \return the gain in dB + */ + virtual double get_rx_gain(const std::string &name, size_t chan = 0) = 0; + + //! A convenience wrapper for getting overall RX gain + double get_rx_gain(size_t chan = 0){ + return this->get_rx_gain(ALL_GAINS, chan); + } + + /*! + * Get the RX gain range for the specified gain element. + * For an empty name, calculate the overall gain range. + * \param name the name of the gain element + * \param chan the channel index 0 to N-1 + * \return a gain range object + */ + virtual gain_range_t get_rx_gain_range(const std::string &name, size_t chan = 0) = 0; + + //! A convenience wrapper for getting overall RX gain range + gain_range_t get_rx_gain_range(size_t chan = 0){ + return this->get_rx_gain_range(ALL_GAINS, chan); + } + + /*! + * Get the names of the gain elements in the RX chain. + * Gain elements are ordered from antenna to FPGA. + * \param chan the channel index 0 to N-1 + * \return a vector of gain element names + */ + virtual std::vector<std::string> get_rx_gain_names(size_t chan = 0) = 0; + + /*! + * Select the RX antenna on the subdevice. + * \param ant the antenna name + * \param chan the channel index 0 to N-1 + */ + virtual void set_rx_antenna(const std::string &ant, size_t chan = 0) = 0; + + /*! + * Get the selected RX antenna on the subdevice. + * \param chan the channel index 0 to N-1 + * \return the antenna name + */ + virtual std::string get_rx_antenna(size_t chan = 0) = 0; + + /*! + * Get a list of possible RX antennas on the subdevice. + * \param chan the channel index 0 to N-1 + * \return a vector of antenna names + */ + virtual std::vector<std::string> get_rx_antennas(size_t chan = 0) = 0; + + /*! + * Get the locked status of the LO on the subdevice. + * \param chan the channel index 0 to N-1 + * \return true for locked + */ + UHD_DEPRECATED bool get_rx_lo_locked(size_t chan = 0){ + return this->get_rx_sensor("lo_locked", chan).to_bool(); + } + + /*! + * Set the RX bandwidth on the subdevice. + * \param bandwidth the bandwidth in Hz + * \param chan the channel index 0 to N-1 + */ + virtual void set_rx_bandwidth(double bandwidth, size_t chan = 0) = 0; + + /*! + * Get the RX bandwidth on the subdevice. + * \param chan the channel index 0 to N-1 + * \return the bandwidth in Hz + */ + virtual double get_rx_bandwidth(size_t chan = 0) = 0; + + /*! + * Read the RSSI value on the RX subdevice. + * \param chan the channel index 0 to N-1 + * \return the rssi in dB + * \throw exception if RSSI readback not supported + */ + UHD_DEPRECATED double read_rssi(size_t chan = 0){ + return this->get_rx_sensor("rssi", chan).to_real(); + } + + /*! + * Get the dboard interface object for the RX subdevice. + * The dboard interface gives access to GPIOs, SPI, I2C, low-speed ADC and DAC. + * Use at your own risk! + * \param chan the channel index 0 to N-1 + * \return the dboard interface sptr + */ + virtual dboard_iface::sptr get_rx_dboard_iface(size_t chan = 0) = 0; + + /*! + * Get an RX subdevice sensor value. + * \param name the name of the sensor + * \param chan the channel index 0 to N-1 + * \return a sensor value object + */ + virtual sensor_value_t get_rx_sensor(const std::string &name, size_t chan = 0) = 0; + + /*! + * Get a list of possible RX subdevice sensor names. + * \param chan the channel index 0 to N-1 + * \return a vector of sensor names + */ + virtual std::vector<std::string> get_rx_sensor_names(size_t chan = 0) = 0; + + /******************************************************************* + * TX methods + ******************************************************************/ + /*! + * Set the TX subdevice specification: + * The subdev spec maps a physical part of a daughter-board to a channel number. + * Set the subdev spec before calling into any methods with a channel number. + * The subdev spec must be the same size across all motherboards. + * \param spec the new subdevice specification + * \param mboard the motherboard index 0 to M-1 + */ + virtual void set_tx_subdev_spec(const uhd::usrp::subdev_spec_t &spec, size_t mboard = ALL_MBOARDS) = 0; + + /*! + * Get the TX subdevice specification. + * \param mboard the motherboard index 0 to M-1 + * \return the subdevice specification in use + */ + virtual uhd::usrp::subdev_spec_t get_tx_subdev_spec(size_t mboard = 0) = 0; + + /*! + * Get the number of TX channels in this configuration. + * This is the number of USRPs times the number of TX channels per board, + * where the number of TX channels per board is homogeneous among all USRPs. + */ + virtual size_t get_tx_num_channels(void) = 0; + + /*! + * Get the name of the TX subdevice. + * \param chan the channel index 0 to N-1 + * \return the subdevice name + */ + virtual std::string get_tx_subdev_name(size_t chan = 0) = 0; + + /*! + * Set the TX sample rate. + * \param rate the rate in Sps + * \param chan the channel index 0 to N-1 + */ + virtual void set_tx_rate(double rate, size_t chan = ALL_CHANS) = 0; + + /*! + * Gets the TX sample rate. + * \param chan the channel index 0 to N-1 + * \return the rate in Sps + */ + virtual double get_tx_rate(size_t chan = 0) = 0; + + /*! + * Set the TX center frequency. + * \param tune_request tune request instructions + * \param chan the channel index 0 to N-1 + * \return a tune result object + */ + virtual tune_result_t set_tx_freq( + const tune_request_t &tune_request, size_t chan = 0 + ) = 0; + + /*! + * Get the TX center frequency. + * \param chan the channel index 0 to N-1 + * \return the frequency in Hz + */ + virtual double get_tx_freq(size_t chan = 0) = 0; + + /*! + * Get the TX center frequency range. + * \param chan the channel index 0 to N-1 + * \return a frequency range object + */ + virtual freq_range_t get_tx_freq_range(size_t chan = 0) = 0; + + /*! + * Set the TX gain value for the specified gain element. + * For an empty name, distribute across all gain elements. + * \param gain the gain in dB + * \param name the name of the gain element + * \param chan the channel index 0 to N-1 + */ + virtual void set_tx_gain(double gain, const std::string &name, size_t chan = 0) = 0; + + //! A convenience wrapper for setting overall TX gain + void set_tx_gain(double gain, size_t chan = 0){ + return this->set_tx_gain(gain, ALL_GAINS, chan); + } + + /*! + * Get the TX gain value for the specified gain element. + * For an empty name, sum across all gain elements. + * \param name the name of the gain element + * \param chan the channel index 0 to N-1 + * \return the gain in dB + */ + virtual double get_tx_gain(const std::string &name, size_t chan = 0) = 0; + + //! A convenience wrapper for getting overall TX gain + double get_tx_gain(size_t chan = 0){ + return this->get_tx_gain(ALL_GAINS, chan); + } + + /*! + * Get the TX gain range for the specified gain element. + * For an empty name, calculate the overall gain range. + * \param name the name of the gain element + * \param chan the channel index 0 to N-1 + * \return a gain range object + */ + virtual gain_range_t get_tx_gain_range(const std::string &name, size_t chan = 0) = 0; + + //! A convenience wrapper for getting overall TX gain range + gain_range_t get_tx_gain_range(size_t chan = 0){ + return this->get_tx_gain_range(ALL_GAINS, chan); + } + + /*! + * Get the names of the gain elements in the TX chain. + * Gain elements are ordered from antenna to FPGA. + * \param chan the channel index 0 to N-1 + * \return a vector of gain element names + */ + virtual std::vector<std::string> get_tx_gain_names(size_t chan = 0) = 0; + + /*! + * Select the TX antenna on the subdevice. + * \param ant the antenna name + * \param chan the channel index 0 to N-1 + */ + virtual void set_tx_antenna(const std::string &ant, size_t chan = 0) = 0; + + /*! + * Get the selected TX antenna on the subdevice. + * \param chan the channel index 0 to N-1 + * \return the antenna name + */ + virtual std::string get_tx_antenna(size_t chan = 0) = 0; + + /*! + * Get a list of possible TX antennas on the subdevice. + * \param chan the channel index 0 to N-1 + * \return a vector of antenna names + */ + virtual std::vector<std::string> get_tx_antennas(size_t chan = 0) = 0; + + /*! + * Get the locked status of the LO on the subdevice. + * \param chan the channel index 0 to N-1 + * \return true for locked + */ + UHD_DEPRECATED bool get_tx_lo_locked(size_t chan = 0){ + return this->get_tx_sensor("lo_locked", chan).to_bool(); + } + + /*! + * Set the TX bandwidth on the subdevice. + * \param bandwidth the bandwidth in Hz + * \param chan the channel index 0 to N-1 + */ + virtual void set_tx_bandwidth(double bandwidth, size_t chan = 0) = 0; + + /*! + * Get the TX bandwidth on the subdevice. + * \param chan the channel index 0 to N-1 + * \return the bandwidth in Hz + */ + virtual double get_tx_bandwidth(size_t chan = 0) = 0; + + /*! + * Get the dboard interface object for the TX subdevice. + * The dboard interface gives access to GPIOs, SPI, I2C, low-speed ADC and DAC. + * Use at your own risk! + * \param chan the channel index 0 to N-1 + * \return the dboard interface sptr + */ + virtual dboard_iface::sptr get_tx_dboard_iface(size_t chan = 0) = 0; + + /*! + * Get an TX subdevice sensor value. + * \param name the name of the sensor + * \param chan the channel index 0 to N-1 + * \return a sensor value object + */ + virtual sensor_value_t get_tx_sensor(const std::string &name, size_t chan = 0) = 0; + + /*! + * Get a list of possible TX subdevice sensor names. + * \param chan the channel index 0 to N-1 + * \return a vector of sensor names + */ + virtual std::vector<std::string> get_tx_sensor_names(size_t chan = 0) = 0; +}; + +}} + +#endif /* INCLUDED_UHD_USRP_MULTI_USRP_HPP */ diff --git a/host/include/uhd/usrp/single_usrp.hpp b/host/include/uhd/usrp/single_usrp.hpp new file mode 100644 index 000000000..0520db162 --- /dev/null +++ b/host/include/uhd/usrp/single_usrp.hpp @@ -0,0 +1,30 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_SINGLE_USRP_HPP +#define INCLUDED_UHD_USRP_SINGLE_USRP_HPP + +#include <uhd/usrp/multi_usrp.hpp> + +namespace uhd{ namespace usrp{ + + //! Multi-USRP is a superset of Single-USRP + typedef multi_usrp single_usrp; + +}} + +#endif /* INCLUDED_UHD_USRP_SINGLE_USRP_HPP */ diff --git a/host/include/uhd/usrp/subdev_props.hpp b/host/include/uhd/usrp/subdev_props.hpp new file mode 100644 index 000000000..40b339703 --- /dev/null +++ b/host/include/uhd/usrp/subdev_props.hpp @@ -0,0 +1,64 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_SUBDEV_PROPS_HPP +#define INCLUDED_UHD_USRP_SUBDEV_PROPS_HPP + +#include <uhd/utils/props.hpp> + +namespace uhd{ namespace usrp{ + + /*! + * Possible subdev connection types: + * + * A complex subdevice is physically connected to both channels, + * which may be connected in one of two ways: IQ or QI (swapped). + * + * A real subdevice is only physically connected one channel, + * either only the I channel or only the Q channel. + */ + enum subdev_conn_t{ + SUBDEV_CONN_COMPLEX_IQ = 'C', + SUBDEV_CONN_COMPLEX_QI = 'c', + SUBDEV_CONN_REAL_I = 'R', + SUBDEV_CONN_REAL_Q = 'r' + }; + + /*! + * Possible device subdev properties + */ + enum subdev_prop_t{ + SUBDEV_PROP_NAME, //ro, std::string + SUBDEV_PROP_OTHERS, //ro, prop_names_t + SUBDEV_PROP_SENSOR, //ro, sensor_value_t + SUBDEV_PROP_SENSOR_NAMES, //ro, prop_names_t + SUBDEV_PROP_GAIN, //rw, double + SUBDEV_PROP_GAIN_RANGE, //ro, gain_range_t + SUBDEV_PROP_GAIN_NAMES, //ro, prop_names_t + SUBDEV_PROP_FREQ, //rw, double + SUBDEV_PROP_FREQ_RANGE, //ro, freq_range_t + SUBDEV_PROP_ANTENNA, //rw, std::string + SUBDEV_PROP_ANTENNA_NAMES, //ro, prop_names_t + SUBDEV_PROP_CONNECTION, //ro, subdev_conn_t + SUBDEV_PROP_ENABLED, //rw, bool + SUBDEV_PROP_USE_LO_OFFSET, //ro, bool + SUBDEV_PROP_BANDWIDTH //rw, double + }; + +}} //namespace + +#endif /* INCLUDED_UHD_USRP_SUBDEV_PROPS_HPP */ diff --git a/host/include/uhd/usrp/subdev_spec.hpp b/host/include/uhd/usrp/subdev_spec.hpp new file mode 100644 index 000000000..b189724c9 --- /dev/null +++ b/host/include/uhd/usrp/subdev_spec.hpp @@ -0,0 +1,96 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_SUBDEV_SPEC_HPP +#define INCLUDED_UHD_USRP_SUBDEV_SPEC_HPP + +#include <uhd/config.hpp> +#include <boost/operators.hpp> +#include <vector> +#include <string> + +namespace uhd{ namespace usrp{ + + /*! + * A subdevice specification (daughterboard slot, subdevice) name pairing. + */ + struct UHD_API subdev_spec_pair_t : boost::equality_comparable<subdev_spec_pair_t>{ + //! The daughterboard slot name + std::string db_name; + + //! The subdevice name + std::string sd_name; + + /*! + * Create a new subdevice specification pair from dboard and subdev names. + * \param db_name the name of a daughterboard slot + * \param sd_name the name of a subdevice on that daughterboard + */ + subdev_spec_pair_t( + const std::string &db_name = "", + const std::string &sd_name = "" + ); + }; + + //! overloaded comparison operator for subdev_spec_pair_t + UHD_API bool operator==(const subdev_spec_pair_t &, const subdev_spec_pair_t &); + + /*! + * A list of (daughterboard slot name, subdevice name) pairs: + * + * A subdevice specification represents a list of subdevices on a motherboard. + * The subdevices specified may span across multiple daughterboards; + * Hence the need for a subdevice specification over a simple list of strings. + * Typically, the user will pass a RX or TX subdevice specification into the API, + * and the implementation will infer the channel configuration from the specification. + * + * The subdevice specification can be represented as a markup-string. + * The markup-string is a whitespace separated list of dboard:subdev pairs. + * The first pair represents the subdevice for channel zero, + * the second pair represents the subdevice for channel one, and so on. + * + * Special handling for empty conditions: + * - An empty subdevice specification means: select the first subdevice found in the configuration + * - An empty daughterboard name means: select the only daughterboard slot or error if multiple exist + * - An empty subdevice name means: select the only subdevice on that board or error if multiple exist + */ + class UHD_API subdev_spec_t : public std::vector<subdev_spec_pair_t>{ + public: + + /*! + * Create a subdev specification from a markup string. + * \param markup the markup string + */ + subdev_spec_t(const std::string &markup = ""); + + /*! + * Convert a subdev specification into a pretty print string. + * \return a printable string representing the subdev specification + */ + std::string to_pp_string(void) const; + + /*! + * Convert the subdevice specification into a markup string. + * The markup string contains the delimiter symbols. + * \return a string with delimiter markup + */ + std::string to_string(void) const; + }; + +}} + +#endif /* INCLUDED_UHD_USRP_SUBDEV_SPEC_HPP */ diff --git a/host/include/uhd/usrp/tune_helper.hpp b/host/include/uhd/usrp/tune_helper.hpp new file mode 100644 index 000000000..e97ab0298 --- /dev/null +++ b/host/include/uhd/usrp/tune_helper.hpp @@ -0,0 +1,78 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_TUNE_HELPER_HPP +#define INCLUDED_UHD_USRP_TUNE_HELPER_HPP + +#include <uhd/config.hpp> +#include <uhd/wax.hpp> +#include <uhd/types/tune_request.hpp> +#include <uhd/types/tune_result.hpp> + +namespace uhd{ namespace usrp{ + + /*! + * Tune a rx chain to the desired frequency: + * The IF of the subdevice is set as close as possible to + * the given target frequency + the LO offset (when applicable). + * The ddc cordic is setup to bring the IF down to baseband. + * \param subdev the dboard subdevice object with properties + * \param ddc the mboard dsp object with properties + * \param tune_request tune request instructions + * \return a tune result struct + */ + UHD_API tune_result_t tune_rx_subdev_and_dsp( + wax::obj subdev, wax::obj ddc, const tune_request_t &tune_request + ); + + /*! + * Calculate the overall frequency from the combination of dboard IF and DDC shift. + * \param subdev the dboard subdevice object with properties + * \param ddc the mboard dsp object with properties + * \return the overall tune frequency of the system in Hz + */ + UHD_API double derive_freq_from_rx_subdev_and_dsp( + wax::obj subdev, wax::obj ddc + ); + + /*! + * Tune a tx chain to the desired frequency: + * The IF of the subdevice is set as close as possible to + * the given target frequency + the LO offset (when applicable). + * The duc cordic is setup to bring the baseband up to IF. + * \param subdev the dboard subdevice object with properties + * \param duc the mboard dsp object with properties + * \param tune_request tune request instructions + * \return a tune result struct + */ + UHD_API tune_result_t tune_tx_subdev_and_dsp( + wax::obj subdev, wax::obj duc, const tune_request_t &tune_request + ); + + /*! + * Calculate the overall frequency from the combination of dboard IF and DUC shift. + * \param subdev the dboard subdevice object with properties + * \param duc the mboard dsp object with properties + * \return the overall tune frequency of the system in Hz + */ + UHD_API double derive_freq_from_tx_subdev_and_dsp( + wax::obj subdev, wax::obj duc + ); + +}} + +#endif /* INCLUDED_UHD_USRP_TUNE_HELPER_HPP */ diff --git a/host/include/uhd/utils/CMakeLists.txt b/host/include/uhd/utils/CMakeLists.txt new file mode 100644 index 000000000..70f724c2d --- /dev/null +++ b/host/include/uhd/utils/CMakeLists.txt @@ -0,0 +1,34 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +INSTALL(FILES + algorithm.hpp + assert_has.hpp + assert_has.ipp + byteswap.hpp + byteswap.ipp + gain_group.hpp + images.hpp + pimpl.hpp + props.hpp + safe_call.hpp + safe_main.hpp + static.hpp + thread_priority.hpp + warning.hpp + DESTINATION ${INCLUDE_DIR}/uhd/utils +) diff --git a/host/include/uhd/utils/algorithm.hpp b/host/include/uhd/utils/algorithm.hpp new file mode 100644 index 000000000..5598d862b --- /dev/null +++ b/host/include/uhd/utils/algorithm.hpp @@ -0,0 +1,90 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_ALGORITHM_HPP +#define INCLUDED_UHD_UTILS_ALGORITHM_HPP + +#include <algorithm> +#include <boost/range/begin.hpp> +#include <boost/range/end.hpp> + +/*! + * Useful templated functions and classes that I like to pretend are part of stl. + * Many of the range wrapper functions come with recent versions of boost (1.43). + */ +namespace uhd{ + + /*! + * A wrapper around std::sort that takes a range instead of an iterator. + * + * The elements are sorted into ascending order using the less-than operator. + * This wrapper sorts the elements non-destructively into a new range. + * Based on the builtin python function sorted(...) + * + * \param range the range of elements to be sorted + * \return a new range with the elements sorted + */ + template<typename Range> inline Range sorted(const Range &range){ + Range r(range); std::sort(boost::begin(r), boost::end(r)); return r; + } + + /*! + * A wrapper around std::reverse that takes a range instead of an iterator. + * + * The elements are reversed into descending order using the less-than operator. + * This wrapper reverses the elements non-destructively into a new range. + * Based on the builtin python function reversed(...) + * + * \param range the range of elements to be reversed + * \return a new range with the elements reversed + */ + template<typename Range> inline Range reversed(const Range &range){ + Range r(range); std::reverse(boost::begin(r), boost::end(r)); return r; + } + + /*! + * Is the value found within the elements in this range? + * + * Uses std::find to search the iterable for an element. + * + * \param range the elements to search through + * \param value the match to look for in the range + * \return true when the value is found in the range + */ + template<typename Range, typename T> inline + bool has(const Range &range, const T &value){ + return boost::end(range) != std::find(boost::begin(range), boost::end(range), value); + } + + /*! + * A templated clip implementation. + * \param val the value to clip between an upper and lower limit + * \param bound1 the upper or lower bound + * \param bound2 the upper or lower bound + * \return the value clipped at the bounds + */ + template<typename T> inline T clip(const T &val, const T &bound1, const T &bound2){ + const T minimum = std::min(bound1, bound2); + if (val < minimum) return minimum; + const T maximum = std::max(bound1, bound2); + if (val > maximum) return maximum; + return val; + } + +} //namespace uhd + +#endif /* INCLUDED_UHD_UTILS_ALGORITHM_HPP */ diff --git a/host/include/uhd/utils/assert_has.hpp b/host/include/uhd/utils/assert_has.hpp new file mode 100644 index 000000000..eae7652ad --- /dev/null +++ b/host/include/uhd/utils/assert_has.hpp @@ -0,0 +1,47 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_ASSERT_HAS_HPP +#define INCLUDED_UHD_UTILS_ASSERT_HAS_HPP + +#include <uhd/config.hpp> +#include <string> + +namespace uhd{ + + /*! + * Check that an element is found in a container. + * If not, throw a meaningful assertion error. + * The "what" in the error will show what is + * being set and a list of known good values. + * + * \param range a list of possible settings + * \param value an element that may be in the list + * \param what a description of what the value is + * \throw assertion_error when elem not in list + */ + template<typename T, typename Range> void assert_has( + const Range &range, + const T &value, + const std::string &what = "unknown" + ); + +}//namespace uhd + +#include <uhd/utils/assert_has.ipp> + +#endif /* INCLUDED_UHD_UTILS_ASSERT_HAS_HPP */ diff --git a/host/include/uhd/utils/assert_has.ipp b/host/include/uhd/utils/assert_has.ipp new file mode 100644 index 000000000..7b3c88cb7 --- /dev/null +++ b/host/include/uhd/utils/assert_has.ipp @@ -0,0 +1,53 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_ASSERT_HAS_IPP +#define INCLUDED_UHD_UTILS_ASSERT_HAS_IPP + +#include <uhd/utils/algorithm.hpp> +#include <uhd/exception.hpp> +#include <boost/format.hpp> +#include <boost/foreach.hpp> +#include <boost/lexical_cast.hpp> + +namespace uhd{ + + template<typename T, typename Range> UHD_INLINE void assert_has( + const Range &range, + const T &value, + const std::string &what + ){ + if (uhd::has(range, value)) return; + std::string possible_values = ""; + size_t i = 0; + BOOST_FOREACH(const T &v, range){ + if (i++ > 0) possible_values += ", "; + possible_values += boost::lexical_cast<std::string>(v); + } + throw uhd::assertion_error(str(boost::format( + "assertion failed:\n" + " %s is not a valid %s.\n" + " possible values are: [%s].\n" + ) + % boost::lexical_cast<std::string>(value) + % what % possible_values + )); + } + +}//namespace uhd + +#endif /* INCLUDED_UHD_UTILS_ASSERT_HAS_IPP */ diff --git a/host/include/uhd/utils/byteswap.hpp b/host/include/uhd/utils/byteswap.hpp new file mode 100644 index 000000000..9a1871210 --- /dev/null +++ b/host/include/uhd/utils/byteswap.hpp @@ -0,0 +1,50 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_BYTESWAP_HPP +#define INCLUDED_UHD_UTILS_BYTESWAP_HPP + +#include <uhd/config.hpp> +#include <boost/cstdint.hpp> + +/*! \file byteswap.hpp + * Provide fast byteswaping routines for 16, 32, and 64 bit integers, + * by using the system's native routines/intrinsics when available. + */ + +namespace uhd{ + + //! perform a byteswap on a 16 bit integer + boost::uint16_t byteswap(boost::uint16_t); + + //! perform a byteswap on a 32 bit integer + boost::uint32_t byteswap(boost::uint32_t); + + //! perform a byteswap on a 64 bit integer + boost::uint64_t byteswap(boost::uint64_t); + + //! network to host: short, long, or long-long + template<typename T> T ntohx(T); + + //! host to network: short, long, or long-long + template<typename T> T htonx(T); + +} //namespace uhd + +#include <uhd/utils/byteswap.ipp> + +#endif /* INCLUDED_UHD_UTILS_BYTESWAP_HPP */ diff --git a/host/include/uhd/utils/byteswap.ipp b/host/include/uhd/utils/byteswap.ipp new file mode 100644 index 000000000..a070a7cf5 --- /dev/null +++ b/host/include/uhd/utils/byteswap.ipp @@ -0,0 +1,120 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_BYTESWAP_IPP +#define INCLUDED_UHD_UTILS_BYTESWAP_IPP + +/*********************************************************************** + * Platform-specific implementation details for byteswap below: + **********************************************************************/ +#if defined(UHD_PLATFORM_WIN32) //http://msdn.microsoft.com/en-us/library/a3140177%28VS.80%29.aspx + #include <stdlib.h> + + UHD_INLINE boost::uint16_t uhd::byteswap(boost::uint16_t x){ + return _byteswap_ushort(x); + } + + UHD_INLINE boost::uint32_t uhd::byteswap(boost::uint32_t x){ + return _byteswap_ulong(x); + } + + UHD_INLINE boost::uint64_t uhd::byteswap(boost::uint64_t x){ + return _byteswap_uint64(x); + } + +#elif defined(__GNUC__) && __GNUC__ >= 4 && __GNUC_MINOR__ >= 2 + + UHD_INLINE boost::uint16_t uhd::byteswap(boost::uint16_t x){ + return (x>>8) | (x<<8); //DNE return __builtin_bswap16(x); + } + + UHD_INLINE boost::uint32_t uhd::byteswap(boost::uint32_t x){ + return __builtin_bswap32(x); + } + + UHD_INLINE boost::uint64_t uhd::byteswap(boost::uint64_t x){ + return __builtin_bswap64(x); + } + +#elif defined(UHD_PLATFORM_MACOS) + #include <libkern/OSByteOrder.h> + + UHD_INLINE boost::uint16_t uhd::byteswap(boost::uint16_t x){ + return OSSwapInt16(x); + } + + UHD_INLINE boost::uint32_t uhd::byteswap(boost::uint32_t x){ + return OSSwapInt32(x); + } + + UHD_INLINE boost::uint64_t uhd::byteswap(boost::uint64_t x){ + return OSSwapInt64(x); + } + +#elif defined(UHD_PLATFORM_LINUX) + #include <byteswap.h> + + UHD_INLINE boost::uint16_t uhd::byteswap(boost::uint16_t x){ + return bswap_16(x); + } + + UHD_INLINE boost::uint32_t uhd::byteswap(boost::uint32_t x){ + return bswap_32(x); + } + + UHD_INLINE boost::uint64_t uhd::byteswap(boost::uint64_t x){ + return bswap_64(x); + } + +#else //http://www.koders.com/c/fidB93B34CD44F0ECF724F1A4EAE3854BA2FE692F59.aspx + + UHD_INLINE boost::uint16_t uhd::byteswap(boost::uint16_t x){ + return (x>>8) | (x<<8); + } + + UHD_INLINE boost::uint32_t uhd::byteswap(boost::uint32_t x){ + return (boost::uint32_t(uhd::byteswap(boost::uint16_t(x&0xfffful)))<<16) | (uhd::byteswap(boost::uint16_t(x>>16))); + } + + UHD_INLINE boost::uint64_t uhd::byteswap(boost::uint64_t x){ + return (boost::uint64_t(uhd::byteswap(boost::uint32_t(x&0xffffffffull)))<<32) | (uhd::byteswap(boost::uint32_t(x>>32))); + } + +#endif + +/*********************************************************************** + * Define the templated network to/from host conversions + **********************************************************************/ +#include <boost/detail/endian.hpp> + +template<typename T> UHD_INLINE T uhd::ntohx(T num){ + #ifdef BOOST_BIG_ENDIAN + return num; + #else + return uhd::byteswap(num); + #endif +} + +template<typename T> UHD_INLINE T uhd::htonx(T num){ + #ifdef BOOST_BIG_ENDIAN + return num; + #else + return uhd::byteswap(num); + #endif +} + +#endif /* INCLUDED_UHD_UTILS_BYTESWAP_IPP */ diff --git a/host/include/uhd/utils/gain_group.hpp b/host/include/uhd/utils/gain_group.hpp new file mode 100644 index 000000000..7ef7bdcf5 --- /dev/null +++ b/host/include/uhd/utils/gain_group.hpp @@ -0,0 +1,108 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_GAIN_GROUP_HPP +#define INCLUDED_UHD_UTILS_GAIN_GROUP_HPP + +#include <uhd/config.hpp> +#include <uhd/types/ranges.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/function.hpp> +#include <boost/utility.hpp> +#include <vector> +#include <string> + +namespace uhd{ + +/*! + * A set of function to control a gain element. + */ +struct UHD_API gain_fcns_t{ + boost::function<gain_range_t(void)> get_range; + boost::function<double(void)> get_value; + boost::function<void(double)> set_value; +}; + +class UHD_API gain_group : boost::noncopyable{ +public: + typedef boost::shared_ptr<gain_group> sptr; + + /*! + * Get the gain range for the gain element specified by name. + * For an empty name, get the overall gain range for this group. + * Overall step is defined as the minimum step size. + * \param name name of the gain element (optional) + * \return a gain range with overall min, max, step + */ + virtual gain_range_t get_range(const std::string &name = "") = 0; + + /*! + * Get the gain value for the gain element specified by name. + * For an empty name, get the overall gain value for this group. + * \param name name of the gain element (optional) + * \return a gain value of the element or all elements + */ + virtual double get_value(const std::string &name = "") = 0; + + /*! + * Set the gain value for the gain element specified by name. + * For an empty name, set the overall gain value for this group. + * The power will be distributed across individual gain elements. + * The semantics of how to do this are determined by the priority. + * \param gain the gain to set for the lement or across the group + * \param name name of the gain element (optional) + */ + virtual void set_value(double gain, const std::string &name = "") = 0; + + /*! + * Get a list of names of registered gain elements. + * The names are in the order that they were registered. + * \return a vector of gain name strings + */ + virtual const std::vector<std::string> get_names(void) = 0; + + /*! + * Register a set of gain functions into this group: + * + * The name should be a unique and non-empty name. + * Othwerwise, the implementation will rename it. + * + * Priority determines how power will be distributed + * with higher priorities getting the power first, + * and lower priorities getting the remainder power. + * + * \param name the name of the gain element + * \param gain_fcns the set of gain functions + * \param priority the priority of the gain element + */ + virtual void register_fcns( + const std::string &name, + const gain_fcns_t &gain_fcns, + size_t priority = 0 + ) = 0; + + /*! + * Make a new empty gain group. + * \return a gain group object. + */ + static sptr make(void); +}; + +} //namespace uhd + +#endif /* INCLUDED_UHD_UTILS_GAIN_GROUP_HPP */ + diff --git a/host/include/uhd/utils/images.hpp b/host/include/uhd/utils/images.hpp new file mode 100644 index 000000000..8b5a1eedd --- /dev/null +++ b/host/include/uhd/utils/images.hpp @@ -0,0 +1,38 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_IMAGES_HPP +#define INCLUDED_UHD_UTILS_IMAGES_HPP + +#include <uhd/config.hpp> +#include <string> + +namespace uhd{ + + /*! + * Search for an image in the system image paths: + * Search compiled-in paths and environment variable paths + * for a specific image file with the provided file name. + * \param image_name the name of the file + * \return the full system path to the file + * \throw exception if the image was not found + */ + UHD_API std::string find_image_path(const std::string &image_name); + +} //namespace uhd + +#endif /* INCLUDED_UHD_UTILS_IMAGES_HPP */ diff --git a/host/include/uhd/utils/pimpl.hpp b/host/include/uhd/utils/pimpl.hpp new file mode 100644 index 000000000..09bf0c0a2 --- /dev/null +++ b/host/include/uhd/utils/pimpl.hpp @@ -0,0 +1,55 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_PIMPL_HPP +#define INCLUDED_UHD_UTILS_PIMPL_HPP + +#include <uhd/config.hpp> +#include <boost/shared_ptr.hpp> + +/*! \file pimpl.hpp + * "Pimpl idiom" (pointer to implementation idiom). + * The UHD_PIMPL_* macros simplify code overhead for declaring and making pimpls. + * + * Each pimpl is implemented as a shared pointer to the implementation: + * - The container class will not have to deallocate the pimpl. + * - The container class will use the pimpl as a regular pointer. + * - Usage: _impl->method(arg0, arg1) + * - Usage: _impl->member = value; + * + * \see http://en.wikipedia.org/wiki/Opaque_pointer + */ + +/*! + * Make a declaration for a pimpl in a header file. + * - Usage: UHD_PIMPL_DECL(impl) _impl; + * \param _name the name of the pimpl class + */ +#define UHD_PIMPL_DECL(_name) \ + struct _name; boost::shared_ptr<_name> + +/*! + * Make an instance of a pimpl in a source file. + * - Usage: _impl = UHD_PIMPL_MAKE(impl, ()); + * - Usage: _impl = UHD_PIMPL_MAKE(impl, (a0, a1)); + * \param _name the name of the pimpl class + * \param _args the constructor args for the pimpl + */ +#define UHD_PIMPL_MAKE(_name, _args) \ + boost::shared_ptr<_name>(new _name _args) + +#endif /* INCLUDED_UHD_UTILS_PIMPL_HPP */ diff --git a/host/include/uhd/utils/props.hpp b/host/include/uhd/utils/props.hpp new file mode 100644 index 000000000..81737423a --- /dev/null +++ b/host/include/uhd/utils/props.hpp @@ -0,0 +1,81 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_PROPS_HPP +#define INCLUDED_UHD_UTILS_PROPS_HPP + +#include <uhd/config.hpp> +#include <uhd/wax.hpp> +#include <uhd/exception.hpp> +#include <vector> +#include <string> + +namespace uhd{ + + //! The type for a vector of property names + typedef std::vector<std::string> prop_names_t; + + /*! + * A named prop struct holds a key and a name. + * Allows properties to be sub-sectioned by name. + */ + struct UHD_API named_prop_t{ + const wax::obj key; + const std::string name; + + //! Convert the key to the specified type + template<typename T> inline T as(void){ + return key.as<T>(); + } + + /*! + * Utility function to convert generic key into a named prop. + * If the key was already a named prop, the prop will be split. + * Otherwise, the key will be the key, and the name will be used. + * \param key a reference to the prop object + * \param name a reference to the name object + * \return a named property struct with key and name + */ + static named_prop_t extract( + const wax::obj &key, const std::string &name = "" + ); + + /*! + * Create a new named prop from key and name. + * \param key the property key + * \param name the string name + */ + named_prop_t(const wax::obj &key, const std::string &name); + }; + + /*! + * Throw when getting a not-implemented or write-only property. + * Throw-site information will be included with this error. + */ + #define UHD_THROW_PROP_GET_ERROR() \ + throw uhd::key_error(UHD_THROW_SITE_INFO("cannot get this property")) + + /*! + * Throw when setting a not-implemented or read-only property. + * Throw-site information will be included with this error. + */ + #define UHD_THROW_PROP_SET_ERROR() \ + throw uhd::key_error(UHD_THROW_SITE_INFO("cannot set this property")) + +} //namespace uhd + +#endif /* INCLUDED_UHD_UTILS_PROPS_HPP */ diff --git a/host/include/uhd/utils/safe_call.hpp b/host/include/uhd/utils/safe_call.hpp new file mode 100644 index 000000000..6b2c210af --- /dev/null +++ b/host/include/uhd/utils/safe_call.hpp @@ -0,0 +1,45 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_SAFE_CALL_HPP +#define INCLUDED_UHD_UTILS_SAFE_CALL_HPP + +#include <uhd/config.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/warning.hpp> + +//! helper macro for safe call to produce warnings +#define _UHD_SAFE_CALL_WARNING(code, what) uhd::warning::post( \ + UHD_THROW_SITE_INFO("Exception caught in safe-call.") + #code + " -> " + what \ +); + +/*! + * A safe-call catches all exceptions thrown by code, + * and creates a verbose warning about the exception. + * Usage: UHD_SAFE_CALL(some_code_to_call();) + * \param code the block of code to call safely + */ +#define UHD_SAFE_CALL(code) \ + try{code} \ + catch(const std::exception &e){ \ + _UHD_SAFE_CALL_WARNING(code, e.what()); \ + } \ + catch(...){ \ + _UHD_SAFE_CALL_WARNING(code, "unknown exception"); \ + } + +#endif /* INCLUDED_UHD_UTILS_SAFE_CALL_HPP */ diff --git a/host/include/uhd/utils/safe_main.hpp b/host/include/uhd/utils/safe_main.hpp new file mode 100644 index 000000000..b682aa540 --- /dev/null +++ b/host/include/uhd/utils/safe_main.hpp @@ -0,0 +1,44 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_SAFE_MAIN_HPP +#define INCLUDED_UHD_UTILS_SAFE_MAIN_HPP + +#include <uhd/config.hpp> +#include <iostream> +#include <stdexcept> + +/*! + * Defines a safe wrapper that places a catch-all around main. + * If an exception is thrown, it prints to stderr and returns. + * Usage: int UHD_SAFE_MAIN(int argc, char *argv[]){ main code here } + * \param _argc the declaration for argc + * \param _argv the declaration for argv + */ +#define UHD_SAFE_MAIN(_argc, _argv) _main(int, char*[]); \ +int main(int argc, char *argv[]){ \ + try { \ + return _main(argc, argv); \ + } catch(const std::exception &e) { \ + std::cerr << "Error: " << e.what() << std::endl; \ + } catch(...) { \ + std::cerr << "Error: unknown exception" << std::endl; \ + } \ + return ~0; \ +} int _main(_argc, _argv) + +#endif /* INCLUDED_UHD_UTILS_SAFE_MAIN_HPP */ diff --git a/host/include/uhd/utils/static.hpp b/host/include/uhd/utils/static.hpp new file mode 100644 index 000000000..82cdf36d9 --- /dev/null +++ b/host/include/uhd/utils/static.hpp @@ -0,0 +1,46 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_STATIC_HPP +#define INCLUDED_UHD_UTILS_STATIC_HPP + +#include <uhd/config.hpp> + +/*! + * Defines a function that implements the "construct on first use" idiom + * \param _t the type definition for the instance + * \param _x the name of the defined function + * \return a reference to the lazy instance + */ +#define UHD_SINGLETON_FCN(_t, _x) static _t &_x(){static _t _x; return _x;} + +/*! + * Defines a static code block that will be called before main() + * The static block will catch and print exceptions to std error. + * \param _x the unique name of the fixture (unique per source) + */ +#define UHD_STATIC_BLOCK(_x) \ + void _x(void); \ + static _uhd_static_fixture _x##_fixture(&_x, #_x); \ + void _x(void) + +//! Helper for static block, constructor calls function +struct UHD_API _uhd_static_fixture{ + _uhd_static_fixture(void (*)(void), const char *); +}; + +#endif /* INCLUDED_UHD_UTILS_STATIC_HPP */ diff --git a/host/include/uhd/utils/thread_priority.hpp b/host/include/uhd/utils/thread_priority.hpp new file mode 100644 index 000000000..988fc3012 --- /dev/null +++ b/host/include/uhd/utils/thread_priority.hpp @@ -0,0 +1,58 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_THREAD_PRIORITY_HPP +#define INCLUDED_UHD_UTILS_THREAD_PRIORITY_HPP + +#include <uhd/config.hpp> + +namespace uhd{ + + static const float default_thread_priority = float(0.5); + + /*! + * Set the scheduling priority on the current thread. + * + * A new thread or calling process should make this call + * with the defailts this to enable realtime scheduling. + * + * A priority of zero corresponds to normal priority. + * Positive priority values are higher than normal. + * Negative priority values are lower than normal. + * + * \param priority a value between -1 and 1 + * \param realtime true to use realtime mode + * \throw exception on set priority failure + */ + UHD_API void set_thread_priority( + float priority = default_thread_priority, + bool realtime = true + ); + + /*! + * Set the scheduling priority on the current thread. + * Same as set_thread_priority but does not throw on failure. + * \return true on success, false on failure + */ + UHD_API bool set_thread_priority_safe( + float priority = default_thread_priority, + bool realtime = true + ); + +} //namespace uhd + +#endif /* INCLUDED_UHD_UTILS_THREAD_PRIORITY_HPP */ diff --git a/host/include/uhd/utils/warning.hpp b/host/include/uhd/utils/warning.hpp new file mode 100644 index 000000000..a1e3f0d1e --- /dev/null +++ b/host/include/uhd/utils/warning.hpp @@ -0,0 +1,62 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_WARNING_HPP +#define INCLUDED_UHD_UTILS_WARNING_HPP + +#include <uhd/config.hpp> +#include <boost/function.hpp> +#include <vector> +#include <string> + +namespace uhd{ namespace warning{ + + //! Callback function type for a message handler + typedef boost::function<void(std::string)> handler_t; + + /*! + * Post a warning message to all registered handlers. + * \param msg the multiline warning message + */ + UHD_API void post(const std::string &msg); + + /*! + * Register a new handler with this name. + * If the name was already registered for this name, + * the old registered handler will be replaced. + * \param name a unique name for this handler + * \param handler the callback handler function + */ + UHD_API void register_handler(const std::string &name, const handler_t &handler); + + /*! + * Unregister a handler for this name. + * \param name a unique name for a registered handler + * \return the handler that was registered + * \throw error when the name was not found in the registry + */ + UHD_API handler_t unregister_handler(const std::string &name); + + /*! + * Get a list of registered handler names. + * \return a vector of unique string names + */ + UHD_API const std::vector<std::string> registry_names(void); + +}} //namespace uhd::warning + +#endif /* INCLUDED_UHD_UTILS_WARNING_HPP */ diff --git a/host/include/uhd/version.hpp b/host/include/uhd/version.hpp new file mode 100644 index 000000000..19d672e65 --- /dev/null +++ b/host/include/uhd/version.hpp @@ -0,0 +1,28 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_VERSION_HPP +#define INCLUDED_UHD_VERSION_HPP + +#include <uhd/config.hpp> +#include <string> + +namespace uhd{ + UHD_API std::string get_version_string(void); +} //namespace uhd + +#endif /* INCLUDED_UHD_VERSION_HPP */ diff --git a/host/include/uhd/wax.hpp b/host/include/uhd/wax.hpp new file mode 100644 index 000000000..6fd2b8652 --- /dev/null +++ b/host/include/uhd/wax.hpp @@ -0,0 +1,169 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_WAX_HPP +#define INCLUDED_WAX_HPP + +#include <uhd/config.hpp> +#include <uhd/exception.hpp> +#include <boost/any.hpp> +#include <typeinfo> +#include <string> + +/*! + * WAX - it's a metaphor! + * + * The WAX framework allows an object to have generic/anyobj properties. + * These properties can be addressed through generic/anyobj identifiers. + * + * The WAX object itself is an anytype container much like boost::any. + * To retrieve the value of the appropriate type, use my_obj.as<type>(). + * + * Proprties may be referenced though the [] overloaded operator. + * The [] operator returns a special proxy that allows for assigment. + * Also, the [] operators may be chained as in the folowing examples: + * my_obj[prop1][prop2][prop3] = value; + * value = my_obj[prop1][prop2][prop3].as<type>(); + * + * Property nesting occurs when a WAX object gets another object's link. + * This special link is obtained through a call to my_obj.get_link(). + * + * Note: Do not put a class derived from wax::obj into an stl container. + * MSVC will compile the code, but the binaries will crash at runtime. + * Rather, use pointers or smart pointers to instances of the derived class. + */ + +namespace wax{ + + /*! + * WAX object base class: + * + * A wax obj has two major purposes: + * 1) to act as a polymorphic container, just like boost any + * 2) to provide a nested set/get properties interface + * + * Internally, the polymorphic container is handled by a boost any. + * For properties, a subclass should override the set and get methods. + * For property nesting, wax obj subclasses return special links + * to other wax obj subclasses, and the api handles the magic. + */ + class UHD_API obj{ + public: + + /*! + * Default constructor: + * The contents will be empty. + */ + obj(void); + + /*! + * Copy constructor: + * The contents will be cloned. + * \param o another wax::obj + */ + obj(const obj &o); + + /*! + * Templated any type constructor: + * The contents can be anything. + * Uses the boost::any to handle the magic. + * \param o an object of any type + */ + template<class T> obj(const T &o){ + _contents = o; + } + + /*! + * Destructor. + */ + virtual ~obj(void); + + /*! + * The chaining operator: + * This operator allows access objs with properties. + * A call to the [] operator will return a new proxy obj. + * The proxy object is an obj with special proxy contents. + * Assignment and casting can be used on this special object + * to access the property referenced by the obj key. + * \param key a key to identify a property within this obj + * \return a special wax obj that proxies the obj and key + */ + obj operator[](const obj &key); + + /*! + * The assignment operator: + * This operator allows for assignment of new contents. + * In the special case where this obj contains a proxy, + * the value will be set to the proxy's property reference. + * \param val the new value to assign to the wax obj + * \return a reference to this obj (*this) + */ + obj & operator=(const obj &val); + + /*! + * Get a link in the chain: + * When a wax obj returns another wax obj as part of a get call, + * the return value should be set to the result of this method. + * Doing so will ensure chain-ability of the returned object. + * \return an obj containing a valid link to a wax obj + */ + obj get_link(void) const; + + /*! + * Get the type of the contents of this obj. + * \return a reference to the type_info + */ + const std::type_info & type(void) const; + + /*! + * Cast this obj into the desired type. + * Usage: myobj.as<type>() + * + * \return an object of the desired type + * \throw wax::bad_cast when the cast fails + */ + template<class T> T as(void) const{ + try{ + return boost::any_cast<T>(resolve()); + } + catch(const boost::bad_any_cast &e){ + throw uhd::type_error(std::string("") + "Cannot wax cast " + type().name() + " to " + typeid(T).name() + " " + e.what()); + } + } + + private: + //private interface (override in subclasses) + virtual void get(const obj &, obj &); + virtual void set(const obj &, const obj &); + + /*! + * Resolve the contents of this obj. + * In the case where this obj is a proxy, + * the referenced property will be resolved. + * Otherwise, just get the private contents. + * \return a boost any type with contents + */ + boost::any resolve(void) const; + + //private contents of this obj + boost::any _contents; + + }; + +} //namespace wax + +#endif /* INCLUDED_WAX_HPP */ diff --git a/host/lib/CMakeLists.txt b/host/lib/CMakeLists.txt new file mode 100644 index 000000000..dbfa234b6 --- /dev/null +++ b/host/lib/CMakeLists.txt @@ -0,0 +1,124 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +#Creating a shared pointer itself has allocation overhead. +#Define the quick allocator to reduce fast-path overhead. +ADD_DEFINITIONS(-DBOOST_SP_USE_QUICK_ALLOCATOR) + +######################################################################## +# Helpful Macros +######################################################################## +MACRO(LIBUHD_APPEND_SOURCES) + LIST(APPEND libuhd_sources ${ARGV}) +ENDMACRO(LIBUHD_APPEND_SOURCES) + +MACRO(LIBUHD_APPEND_LIBS) + LIST(APPEND libuhd_libs ${ARGV}) +ENDMACRO(LIBUHD_APPEND_LIBS) + +MACRO(LIBUHD_PYTHON_GEN_SOURCE pyfile outfile) + #ensure that the directory exists for outfile + GET_FILENAME_COMPONENT(outfile_dir ${outfile} PATH) + FILE(MAKE_DIRECTORY ${outfile_dir}) + + #make the outfile depend on the python script + ADD_CUSTOM_COMMAND( + OUTPUT ${outfile} DEPENDS ${pyfile} ${LIBUHD_PYTHON_GEN_SOURCE_DEPS} + COMMAND ${PYTHON_EXECUTABLE} -B ${pyfile} ${outfile} + COMMENT "Generating ${outfile}" + ) + + #make libuhd depend on the outfile + LIBUHD_APPEND_SOURCES(${outfile}) +ENDMACRO(LIBUHD_PYTHON_GEN_SOURCE) + +MACRO(INCLUDE_SUBDIRECTORY subdir) + #insert the current directories on the front of the list + LIST(INSERT _cmake_source_dirs 0 ${CMAKE_CURRENT_SOURCE_DIR}) + LIST(INSERT _cmake_binary_dirs 0 ${CMAKE_CURRENT_BINARY_DIR}) + + #set the current directories to the names of the subdirs + SET(CMAKE_CURRENT_SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/${subdir}) + SET(CMAKE_CURRENT_BINARY_DIR ${CMAKE_CURRENT_BINARY_DIR}/${subdir}) + + #include the subdirectory CMakeLists to run it + FILE(MAKE_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}) + INCLUDE(${CMAKE_CURRENT_SOURCE_DIR}/CMakeLists.txt) + + #reset the value of the current directories + LIST(GET _cmake_source_dirs 0 CMAKE_CURRENT_SOURCE_DIR) + LIST(GET _cmake_binary_dirs 0 CMAKE_CURRENT_BINARY_DIR) + + #pop the subdir names of the front of the list + LIST(REMOVE_AT _cmake_source_dirs 0) + LIST(REMOVE_AT _cmake_binary_dirs 0) +ENDMACRO(INCLUDE_SUBDIRECTORY) + +######################################################################## +# Include subdirectories (different than add) +######################################################################## +INCLUDE_SUBDIRECTORY(ic_reg_maps) +INCLUDE_SUBDIRECTORY(types) +INCLUDE_SUBDIRECTORY(convert) +INCLUDE_SUBDIRECTORY(transport) +INCLUDE_SUBDIRECTORY(usrp) +INCLUDE_SUBDIRECTORY(utils) + +######################################################################## +# Append to the list of sources for lib uhd +######################################################################## +FILE(TO_NATIVE_PATH ${CMAKE_INSTALL_PREFIX}/${PKG_DATA_DIR} LOCAL_PKG_DATA_DIR) +STRING(REPLACE "\\" "\\\\" LOCAL_PKG_DATA_DIR ${LOCAL_PKG_DATA_DIR}) +MESSAGE(STATUS "Local package data directory: ${LOCAL_PKG_DATA_DIR}") + +IF(UNIX) + #on unix systems, installers will use this directory for the package data + FILE(TO_NATIVE_PATH /usr/${PKG_DATA_DIR} INSTALLER_PKG_DATA_DIR) + STRING(REPLACE "\\" "\\\\" INSTALLER_PKG_DATA_DIR ${INSTALLER_PKG_DATA_DIR}) + MESSAGE(STATUS "Installer package data directory: ${INSTALLER_PKG_DATA_DIR}") +ENDIF(UNIX) + +CONFIGURE_FILE( + ${CMAKE_CURRENT_SOURCE_DIR}/constants.hpp.in + ${CMAKE_CURRENT_BINARY_DIR}/constants.hpp +@ONLY) +INCLUDE_DIRECTORIES(${CMAKE_CURRENT_BINARY_DIR}) + +LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_BINARY_DIR}/constants.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/device.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/exception.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/version.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/wax.cpp +) + +######################################################################## +# Setup libuhd library +######################################################################## +ADD_LIBRARY(uhd SHARED ${libuhd_sources}) +TARGET_LINK_LIBRARIES(uhd ${Boost_LIBRARIES} ${libuhd_libs}) +SET_TARGET_PROPERTIES(uhd PROPERTIES DEFINE_SYMBOL "UHD_DLL_EXPORTS") +SET_TARGET_PROPERTIES(uhd PROPERTIES SOVERSION ${UHD_VERSION_MAJOR}) +IF(DEFINED LIBUHD_OUTPUT_NAME) + SET_TARGET_PROPERTIES(uhd PROPERTIES OUTPUT_NAME ${LIBUHD_OUTPUT_NAME}) +ENDIF(DEFINED LIBUHD_OUTPUT_NAME) + +INSTALL(TARGETS uhd + LIBRARY DESTINATION ${LIBRARY_DIR} # .so file + ARCHIVE DESTINATION ${LIBRARY_DIR} # .lib file + RUNTIME DESTINATION ${LIBRARY_DIR} # .dll file +) diff --git a/host/lib/constants.hpp.in b/host/lib/constants.hpp.in new file mode 100644 index 000000000..4aedb6d4a --- /dev/null +++ b/host/lib/constants.hpp.in @@ -0,0 +1,26 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_LIBUHD_CONSTANTS_HPP +#define INCLUDED_LIBUHD_CONSTANTS_HPP + +//these should be pre-processor macros to avoid static initialization issues +#define UHD_VERSION_STRING "@CPACK_PACKAGE_VERSION@" +#define LOCAL_PKG_DATA_DIR "@LOCAL_PKG_DATA_DIR@" +#define INSTALLER_PKG_DATA_DIR "@INSTALLER_PKG_DATA_DIR@" + +#endif /* INCLUDED_LIBUHD_CONSTANTS_HPP */ diff --git a/host/lib/convert/CMakeLists.txt b/host/lib/convert/CMakeLists.txt new file mode 100644 index 000000000..d189aa687 --- /dev/null +++ b/host/lib/convert/CMakeLists.txt @@ -0,0 +1,81 @@ +# +# Copyright 2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# This file included, use CMake directory variables +######################################################################## +INCLUDE(CheckIncludeFileCXX) +MESSAGE(STATUS "") + +######################################################################## +# Check for SSE2 SIMD headers +######################################################################## +IF(CMAKE_COMPILER_IS_GNUCXX) + SET(EMMINTRIN_FLAGS -msse2) +ELSEIF(MSVC) + SET(EMMINTRIN_FLAGS /arch:SSE2) +ENDIF() + +SET(CMAKE_REQUIRED_FLAGS ${EMMINTRIN_FLAGS}) +CHECK_INCLUDE_FILE_CXX(emmintrin.h HAVE_EMMINTRIN_H) +UNSET(CMAKE_REQUIRED_FLAGS) + +IF(HAVE_EMMINTRIN_H) + SET_SOURCE_FILES_PROPERTIES( + ${CMAKE_CURRENT_SOURCE_DIR}/convert_with_sse2.cpp + PROPERTIES COMPILE_FLAGS "${EMMINTRIN_FLAGS}" + ) + LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/convert_with_sse2.cpp + ) +ENDIF(HAVE_EMMINTRIN_H) + +######################################################################## +# Check for NEON SIMD headers +######################################################################## +CHECK_INCLUDE_FILE_CXX(arm_neon.h HAVE_ARM_NEON_H) +IF(HAVE_ARM_NEON_H) + LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/convert_with_neon.cpp + ) +ENDIF(HAVE_ARM_NEON_H) + +######################################################################## +# Convert types generation +######################################################################## +INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}) +INCLUDE_DIRECTORIES(${CMAKE_CURRENT_BINARY_DIR}) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_convert_pred.py + ${CMAKE_CURRENT_BINARY_DIR}/convert_pred.hpp +) + +INCLUDE(AddFileDependencies) +ADD_FILE_DEPENDENCIES( + ${CMAKE_CURRENT_SOURCE_DIR}/convert_impl.cpp + ${CMAKE_CURRENT_BINARY_DIR}/convert_pred.hpp +) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_convert_general.py + ${CMAKE_CURRENT_BINARY_DIR}/convert_general.cpp +) + +LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/convert_impl.cpp +) diff --git a/host/lib/convert/convert_common.hpp b/host/lib/convert/convert_common.hpp new file mode 100644 index 000000000..c2ca233d9 --- /dev/null +++ b/host/lib/convert/convert_common.hpp @@ -0,0 +1,115 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_LIBUHD_CONVERT_COMMON_HPP +#define INCLUDED_LIBUHD_CONVERT_COMMON_HPP + +#include <uhd/convert.hpp> +#include <uhd/utils/static.hpp> +#include <boost/cstdint.hpp> +#include <complex> + +#define DECLARE_CONVERTER(fcn, prio) \ + static void fcn( \ + const uhd::convert::input_type &inputs, \ + const uhd::convert::output_type &outputs, \ + size_t nsamps \ + ); \ + UHD_STATIC_BLOCK(register_##fcn##_##prio){ \ + uhd::convert::register_converter(#fcn, fcn, prio); \ + } \ + static void fcn( \ + const uhd::convert::input_type &inputs, \ + const uhd::convert::output_type &outputs, \ + size_t nsamps \ + ) + +/*********************************************************************** + * Typedefs + **********************************************************************/ +typedef std::complex<double> fc64_t; +typedef std::complex<float> fc32_t; +typedef std::complex<boost::int16_t> sc16_t; +typedef std::complex<boost::int8_t> sc8_t; +typedef boost::uint32_t item32_t; + +/*********************************************************************** + * Convert complex short buffer to items32 + **********************************************************************/ +static UHD_INLINE item32_t sc16_to_item32(sc16_t num){ + boost::uint16_t real = num.real(); + boost::uint16_t imag = num.imag(); + return (item32_t(real) << 16) | (item32_t(imag) << 0); +} + +/*********************************************************************** + * Convert items32 buffer to complex short + **********************************************************************/ +static UHD_INLINE sc16_t item32_to_sc16(item32_t item){ + return sc16_t( + boost::int16_t(item >> 16), + boost::int16_t(item >> 0) + ); +} + +/*********************************************************************** + * Convert complex float buffer to items32 (no swap) + **********************************************************************/ +static const float shorts_per_float = float(32767); + +static UHD_INLINE item32_t fc32_to_item32(fc32_t num){ + boost::uint16_t real = boost::int16_t(num.real()*shorts_per_float); + boost::uint16_t imag = boost::int16_t(num.imag()*shorts_per_float); + return (item32_t(real) << 16) | (item32_t(imag) << 0); +} + +/*********************************************************************** + * Convert items32 buffer to complex float + **********************************************************************/ +static const float floats_per_short = float(1.0/shorts_per_float); + +static UHD_INLINE fc32_t item32_to_fc32(item32_t item){ + return fc32_t( + float(boost::int16_t(item >> 16)*floats_per_short), + float(boost::int16_t(item >> 0)*floats_per_short) + ); +} + +/*********************************************************************** + * Convert complex double buffer to items32 (no swap) + **********************************************************************/ +static const double shorts_per_double = double(32767); + +static UHD_INLINE item32_t fc64_to_item32(fc64_t num){ + boost::uint16_t real = boost::int16_t(num.real()*shorts_per_double); + boost::uint16_t imag = boost::int16_t(num.imag()*shorts_per_double); + return (item32_t(real) << 16) | (item32_t(imag) << 0); +} + +/*********************************************************************** + * Convert items32 buffer to complex double + **********************************************************************/ +static const double doubles_per_short = double(1.0/shorts_per_double); + +static UHD_INLINE fc64_t item32_to_fc64(item32_t item){ + return fc64_t( + float(boost::int16_t(item >> 16)*doubles_per_short), + float(boost::int16_t(item >> 0)*doubles_per_short) + ); +} + +#endif /* INCLUDED_LIBUHD_CONVERT_COMMON_HPP */ diff --git a/host/lib/convert/convert_impl.cpp b/host/lib/convert/convert_impl.cpp new file mode 100644 index 000000000..d43cecfec --- /dev/null +++ b/host/lib/convert/convert_impl.cpp @@ -0,0 +1,111 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/convert.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/exception.hpp> +#include <iostream> + +using namespace uhd; + +#include "convert_pred.hpp" + +static const bool debug = false; + +/*********************************************************************** + * Define types for the function tables + **********************************************************************/ +struct fcn_table_entry_type{ + convert::priority_type prio; + convert::function_type fcn; + fcn_table_entry_type(void) + : prio(convert::PRIORITY_EMPTY), fcn(NULL){ + /* NOP */ + } +}; +typedef std::vector<fcn_table_entry_type> fcn_table_type; + +/*********************************************************************** + * Setup the table registry + **********************************************************************/ +UHD_SINGLETON_FCN(fcn_table_type, get_cpu_to_otw_table); +UHD_SINGLETON_FCN(fcn_table_type, get_otw_to_cpu_table); + +fcn_table_type &get_table(dir_type dir){ + switch(dir){ + case DIR_OTW_TO_CPU: return get_otw_to_cpu_table(); + case DIR_CPU_TO_OTW: return get_cpu_to_otw_table(); + } + UHD_THROW_INVALID_CODE_PATH(); +} + +/*********************************************************************** + * The registry functions + **********************************************************************/ +void uhd::convert::register_converter( + const std::string &markup, + function_type fcn, + priority_type prio +){ + //extract the predicate and direction from the markup + dir_type dir; + pred_type pred = make_pred(markup, dir); + + //get a reference to the function table + fcn_table_type &table = get_table(dir); + + //resize the table so that its at least pred+1 + if (table.size() <= pred) table.resize(pred+1); + + //register the function if higher priority + if (table[pred].prio < prio){ + table[pred].fcn = fcn; + table[pred].prio = prio; + } + + //----------------------------------------------------------------// + if (debug) std::cout << "register_converter: " << markup << std::endl + << " prio: " << prio << std::endl + << " pred: " << pred << std::endl + << " dir: " << dir << std::endl + << std::endl + ; + //----------------------------------------------------------------// +} + +/*********************************************************************** + * The converter functions + **********************************************************************/ +const convert::function_type &convert::get_converter_cpu_to_otw( + const io_type_t &io_type, + const otw_type_t &otw_type, + size_t num_input_buffs, + size_t num_output_buffs +){ + pred_type pred = make_pred(io_type, otw_type, num_input_buffs, num_output_buffs); + return get_cpu_to_otw_table().at(pred).fcn; +} + +const convert::function_type &convert::get_converter_otw_to_cpu( + const io_type_t &io_type, + const otw_type_t &otw_type, + size_t num_input_buffs, + size_t num_output_buffs +){ + pred_type pred = make_pred(io_type, otw_type, num_input_buffs, num_output_buffs); + return get_otw_to_cpu_table().at(pred).fcn; +} diff --git a/host/lib/convert/convert_with_neon.cpp b/host/lib/convert/convert_with_neon.cpp new file mode 100644 index 000000000..3d677db5b --- /dev/null +++ b/host/lib/convert/convert_with_neon.cpp @@ -0,0 +1,61 @@ +// +// Copyright 2011-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "convert_common.hpp" +#include <arm_neon.h> + +using namespace uhd::convert; + +DECLARE_CONVERTER(convert_fc32_1_to_item32_1_nswap, PRIORITY_CUSTOM){ + const fc32_t *input = reinterpret_cast<const fc32_t *>(inputs[0]); + item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); + + size_t i; + + float32x4_t Q0 = vdupq_n_f32(shorts_per_float); + for (i=0; i < (nsamps & ~0x03); i+=2) { + float32x4_t Q1 = vld1q_f32(reinterpret_cast<const float *>(&input[i])); + float32x4_t Q2 = vmulq_f32(Q1, Q0); + int32x4_t Q3 = vcvtq_s32_f32(Q2); + int16x4_t D8 = vmovn_s32(Q3); + int16x4_t D9 = vrev32_s16(D8); + vst1_s16((reinterpret_cast<int16_t *>(&output[i])), D9); + } + + for (; i < nsamps; i++) + output[i] = fc32_to_item32(input[i]); +} + +DECLARE_CONVERTER(convert_item32_1_to_fc32_1_nswap, PRIORITY_CUSTOM){ + const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); + fc32_t *output = reinterpret_cast<fc32_t *>(outputs[0]); + + size_t i; + + float32x4_t Q1 = vdupq_n_f32(floats_per_short); + for (i=0; i < (nsamps & ~0x03); i+=2) { + int16x4_t D0 = vld1_s16(reinterpret_cast<const int16_t *>(&input[i])); + int16x4_t D1 = vrev32_s16(D0); + int32x4_t Q2 = vmovl_s16(D1); + float32x4_t Q3 = vcvtq_f32_s32(Q2); + float32x4_t Q4 = vmulq_f32(Q3, Q1); + vst1q_f32((reinterpret_cast<float *>(&output[i])), Q4); + } + + for (; i < nsamps; i++) + output[i] = item32_to_fc32(input[i]); +} diff --git a/host/lib/convert/convert_with_sse2.cpp b/host/lib/convert/convert_with_sse2.cpp new file mode 100644 index 000000000..96ee9134c --- /dev/null +++ b/host/lib/convert/convert_with_sse2.cpp @@ -0,0 +1,148 @@ +// +// Copyright 2011-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "convert_common.hpp" +#include <uhd/utils/byteswap.hpp> +#include <emmintrin.h> + +using namespace uhd::convert; + +DECLARE_CONVERTER(convert_fc32_1_to_item32_1_nswap, PRIORITY_CUSTOM){ + const fc32_t *input = reinterpret_cast<const fc32_t *>(inputs[0]); + item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); + + __m128 scalar = _mm_set_ps1(shorts_per_float); + + //convert blocks of samples with intrinsics + size_t i = 0; for (; i < (nsamps & ~0x3); i+=4){ + //load from input + __m128 tmplo = _mm_loadu_ps(reinterpret_cast<const float *>(input+i+0)); + __m128 tmphi = _mm_loadu_ps(reinterpret_cast<const float *>(input+i+2)); + + //convert and scale + __m128i tmpilo = _mm_cvtps_epi32(_mm_mul_ps(tmplo, scalar)); + __m128i tmpihi = _mm_cvtps_epi32(_mm_mul_ps(tmphi, scalar)); + + //pack + swap 16-bit pairs + __m128i tmpi = _mm_packs_epi32(tmpilo, tmpihi); + tmpi = _mm_shufflelo_epi16(tmpi, _MM_SHUFFLE(2, 3, 0, 1)); + tmpi = _mm_shufflehi_epi16(tmpi, _MM_SHUFFLE(2, 3, 0, 1)); + + //store to output + _mm_storeu_si128(reinterpret_cast<__m128i *>(output+i), tmpi); + } + + //convert remainder + for (; i < nsamps; i++){ + output[i] = fc32_to_item32(input[i]); + } +} + +DECLARE_CONVERTER(convert_fc32_1_to_item32_1_bswap, PRIORITY_CUSTOM){ + const fc32_t *input = reinterpret_cast<const fc32_t *>(inputs[0]); + item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); + + __m128 scalar = _mm_set_ps1(shorts_per_float); + + //convert blocks of samples with intrinsics + size_t i = 0; for (; i < (nsamps & ~0x3); i+=4){ + //load from input + __m128 tmplo = _mm_loadu_ps(reinterpret_cast<const float *>(input+i+0)); + __m128 tmphi = _mm_loadu_ps(reinterpret_cast<const float *>(input+i+2)); + + //convert and scale + __m128i tmpilo = _mm_cvtps_epi32(_mm_mul_ps(tmplo, scalar)); + __m128i tmpihi = _mm_cvtps_epi32(_mm_mul_ps(tmphi, scalar)); + + //pack + byteswap -> byteswap 16 bit words + __m128i tmpi = _mm_packs_epi32(tmpilo, tmpihi); + tmpi = _mm_or_si128(_mm_srli_epi16(tmpi, 8), _mm_slli_epi16(tmpi, 8)); + + //store to output + _mm_storeu_si128(reinterpret_cast<__m128i *>(output+i), tmpi); + } + + //convert remainder + for (; i < nsamps; i++){ + output[i] = uhd::byteswap(fc32_to_item32(input[i])); + } +} + +DECLARE_CONVERTER(convert_item32_1_to_fc32_1_nswap, PRIORITY_CUSTOM){ + const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); + fc32_t *output = reinterpret_cast<fc32_t *>(outputs[0]); + + __m128 scalar = _mm_set_ps1(floats_per_short/(1 << 16)); + __m128i zeroi = _mm_setzero_si128(); + + //convert blocks of samples with intrinsics + size_t i = 0; for (; i < (nsamps & ~0x3); i+=4){ + //load from input + __m128i tmpi = _mm_loadu_si128(reinterpret_cast<const __m128i *>(input+i)); + + //unpack + swap 16-bit pairs + tmpi = _mm_shufflelo_epi16(tmpi, _MM_SHUFFLE(2, 3, 0, 1)); + tmpi = _mm_shufflehi_epi16(tmpi, _MM_SHUFFLE(2, 3, 0, 1)); + __m128i tmpilo = _mm_unpacklo_epi16(zeroi, tmpi); //value in upper 16 bits + __m128i tmpihi = _mm_unpackhi_epi16(zeroi, tmpi); + + //convert and scale + __m128 tmplo = _mm_mul_ps(_mm_cvtepi32_ps(tmpilo), scalar); + __m128 tmphi = _mm_mul_ps(_mm_cvtepi32_ps(tmpihi), scalar); + + //store to output + _mm_storeu_ps(reinterpret_cast<float *>(output+i+0), tmplo); + _mm_storeu_ps(reinterpret_cast<float *>(output+i+2), tmphi); + } + + //convert remainder + for (; i < nsamps; i++){ + output[i] = item32_to_fc32(input[i]); + } +} + +DECLARE_CONVERTER(convert_item32_1_to_fc32_1_bswap, PRIORITY_CUSTOM){ + const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); + fc32_t *output = reinterpret_cast<fc32_t *>(outputs[0]); + + __m128 scalar = _mm_set_ps1(floats_per_short/(1 << 16)); + __m128i zeroi = _mm_setzero_si128(); + + //convert blocks of samples with intrinsics + size_t i = 0; for (; i < (nsamps & ~0x3); i+=4){ + //load from input + __m128i tmpi = _mm_loadu_si128(reinterpret_cast<const __m128i *>(input+i)); + + //byteswap + unpack -> byteswap 16 bit words + tmpi = _mm_or_si128(_mm_srli_epi16(tmpi, 8), _mm_slli_epi16(tmpi, 8)); + __m128i tmpilo = _mm_unpacklo_epi16(zeroi, tmpi); //value in upper 16 bits + __m128i tmpihi = _mm_unpackhi_epi16(zeroi, tmpi); + + //convert and scale + __m128 tmplo = _mm_mul_ps(_mm_cvtepi32_ps(tmpilo), scalar); + __m128 tmphi = _mm_mul_ps(_mm_cvtepi32_ps(tmpihi), scalar); + + //store to output + _mm_storeu_ps(reinterpret_cast<float *>(output+i+0), tmplo); + _mm_storeu_ps(reinterpret_cast<float *>(output+i+2), tmphi); + } + + //convert remainder + for (; i < nsamps; i++){ + output[i] = item32_to_fc32(uhd::byteswap(input[i])); + } +} diff --git a/host/lib/convert/gen_convert_general.py b/host/lib/convert/gen_convert_general.py new file mode 100644 index 000000000..f03448047 --- /dev/null +++ b/host/lib/convert/gen_convert_general.py @@ -0,0 +1,93 @@ +#!/usr/bin/env python +# +# Copyright 2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +TMPL_HEADER = """ +#import time +/*********************************************************************** + * This file was generated by $file on $time.strftime("%c") + **********************************************************************/ + +\#include "convert_common.hpp" +\#include <uhd/utils/byteswap.hpp> + +using namespace uhd::convert; +""" + +TMPL_CONV_TO_FROM_ITEM32_1 = """ +DECLARE_CONVERTER(convert_$(cpu_type)_1_to_item32_1_$(swap), PRIORITY_GENERAL){ + const $(cpu_type)_t *input = reinterpret_cast<const $(cpu_type)_t *>(inputs[0]); + item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); + + for (size_t i = 0; i < nsamps; i++){ + output[i] = $(swap_fcn)($(cpu_type)_to_item32(input[i])); + } +} + +DECLARE_CONVERTER(convert_item32_1_to_$(cpu_type)_1_$(swap), PRIORITY_GENERAL){ + const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); + $(cpu_type)_t *output = reinterpret_cast<$(cpu_type)_t *>(outputs[0]); + + for (size_t i = 0; i < nsamps; i++){ + output[i] = item32_to_$(cpu_type)($(swap_fcn)(input[i])); + } +} +""" +TMPL_CONV_TO_FROM_ITEM32_X = """ +DECLARE_CONVERTER(convert_$(cpu_type)_$(width)_to_item32_1_$(swap), PRIORITY_GENERAL){ + #for $w in range($width) + const $(cpu_type)_t *input$(w) = reinterpret_cast<const $(cpu_type)_t *>(inputs[$(w)]); + #end for + item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); + + for (size_t i = 0, j = 0; i < nsamps; i++){ + #for $w in range($width) + output[j++] = $(swap_fcn)($(cpu_type)_to_item32(input$(w)[i])); + #end for + } +} + +DECLARE_CONVERTER(convert_item32_1_to_$(cpu_type)_$(width)_$(swap), PRIORITY_GENERAL){ + const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); + #for $w in range($width) + $(cpu_type)_t *output$(w) = reinterpret_cast<$(cpu_type)_t *>(outputs[$(w)]); + #end for + + for (size_t i = 0, j = 0; i < nsamps; i++){ + #for $w in range($width) + output$(w)[i] = item32_to_$(cpu_type)($(swap_fcn)(input[j++])); + #end for + } +} +""" + +def parse_tmpl(_tmpl_text, **kwargs): + from Cheetah.Template import Template + return str(Template(_tmpl_text, kwargs)) + +if __name__ == '__main__': + import sys, os + file = os.path.basename(__file__) + output = parse_tmpl(TMPL_HEADER, file=file) + for width in 1, 2, 3, 4: + for swap, swap_fcn in (('nswap', ''), ('bswap', 'uhd::byteswap')): + for cpu_type in 'fc64', 'fc32', 'sc16': + output += parse_tmpl( + TMPL_CONV_TO_FROM_ITEM32_1 if width == 1 else TMPL_CONV_TO_FROM_ITEM32_X, + width=width, swap=swap, swap_fcn=swap_fcn, cpu_type=cpu_type + ) + open(sys.argv[1], 'w').write(output) diff --git a/host/lib/convert/gen_convert_pred.py b/host/lib/convert/gen_convert_pred.py new file mode 100644 index 000000000..360fbcf44 --- /dev/null +++ b/host/lib/convert/gen_convert_pred.py @@ -0,0 +1,185 @@ +#!/usr/bin/env python +# +# Copyright 2011-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +TMPL_TEXT = """ +#import time +/*********************************************************************** + * This file was generated by $file on $time.strftime("%c") + **********************************************************************/ +\#include <uhd/exception.hpp> +\#include <boost/tokenizer.hpp> +\#include <boost/lexical_cast.hpp> +\#include <boost/detail/endian.hpp> +\#include <boost/cstdint.hpp> +\#include <string> +\#include <vector> + +typedef size_t pred_type; +typedef std::vector<pred_type> pred_vector_type; + +enum dir_type{ + DIR_OTW_TO_CPU = 0, + DIR_CPU_TO_OTW = 1 +}; + +struct pred_error : uhd::value_error{ + pred_error(const std::string &what): + uhd::value_error("convert::make_pred: " + what) + { + /* NOP */ + } +}; + +pred_type make_pred(const std::string &markup, dir_type &dir){ + pred_type pred = 0; + + try{ + boost::tokenizer<boost::char_separator<char> > tokenizer(markup, boost::char_separator<char>("_")); + std::vector<std::string> tokens(tokenizer.begin(), tokenizer.end()); + //token 0 is <convert> + std::string inp_type = tokens.at(1); + std::string num_inps = tokens.at(2); + //token 3 is <to> + std::string out_type = tokens.at(4); + std::string num_outs = tokens.at(5); + std::string swap_type = tokens.at(6); + + std::string cpu_type, otw_type; + if (inp_type.find("item") == std::string::npos){ + cpu_type = inp_type; + otw_type = out_type; + dir = DIR_CPU_TO_OTW; + } + else{ + cpu_type = out_type; + otw_type = inp_type; + dir = DIR_OTW_TO_CPU; + } + + if (cpu_type == "fc64") pred |= $ph.fc64_p; + else if (cpu_type == "fc32") pred |= $ph.fc32_p; + else if (cpu_type == "sc16") pred |= $ph.sc16_p; + else if (cpu_type == "sc8") pred |= $ph.sc8_p; + else throw pred_error("unhandled io type " + cpu_type); + + if (otw_type == "item32") pred |= $ph.item32_p; + else throw pred_error("unhandled otw type " + otw_type); + + int num_inputs = boost::lexical_cast<int>(num_inps); + int num_outputs = boost::lexical_cast<int>(num_outs); + + switch(num_inputs*num_outputs){ //FIXME treated as one value + case 1: pred |= $ph.chan1_p; break; + case 2: pred |= $ph.chan2_p; break; + case 3: pred |= $ph.chan3_p; break; + case 4: pred |= $ph.chan4_p; break; + default: throw pred_error("unhandled number of channels"); + } + + if (swap_type == "bswap") pred |= $ph.bswap_p; + else if (swap_type == "nswap") pred |= $ph.nswap_p; + else throw pred_error("unhandled swap type"); + + } + catch(...){ + throw pred_error("could not parse markup: " + markup); + } + + return pred; +} + +#define pred_table_wildcard pred_type(~0) +#define pred_table_max_size size_t(128) +#define pred_table_index(e) (pred_type(e) & 0x7f) + +static pred_vector_type get_pred_byte_order_table(void){ + pred_vector_type table(pred_table_max_size, pred_table_wildcard); + \#ifdef BOOST_BIG_ENDIAN + table[pred_table_index(otw_type_t::BO_BIG_ENDIAN)] = $ph.nswap_p; + table[pred_table_index(otw_type_t::BO_LITTLE_ENDIAN)] = $ph.bswap_p; + \#else + table[pred_table_index(otw_type_t::BO_BIG_ENDIAN)] = $ph.bswap_p; + table[pred_table_index(otw_type_t::BO_LITTLE_ENDIAN)] = $ph.nswap_p; + \#endif + table[pred_table_index(otw_type_t::BO_NATIVE)] = $ph.nswap_p; + return table; +} + +static pred_vector_type get_pred_io_type_table(void){ + pred_vector_type table(pred_table_max_size, pred_table_wildcard); + table[pred_table_index(io_type_t::COMPLEX_FLOAT64)] = $ph.fc64_p; + table[pred_table_index(io_type_t::COMPLEX_FLOAT32)] = $ph.fc32_p; + table[pred_table_index(io_type_t::COMPLEX_INT16)] = $ph.sc16_p; + return table; +} + +static pred_vector_type get_pred_num_io_table(void){ + pred_vector_type table(pred_table_max_size, pred_table_wildcard); + table[1] = $ph.chan1_p; + table[2] = $ph.chan2_p; + table[3] = $ph.chan3_p; + table[4] = $ph.chan4_p; + return table; +} + +UHD_INLINE pred_type make_pred( + const io_type_t &io_type, + const otw_type_t &otw_type, + size_t num_inputs, + size_t num_outputs +){ + pred_type pred = $ph.item32_p; //only item32 supported as of now + + static const pred_vector_type pred_byte_order_table(get_pred_byte_order_table()); + pred |= pred_byte_order_table[pred_table_index(otw_type.byteorder)]; + + static const pred_vector_type pred_io_type_table(get_pred_io_type_table()); + pred |= pred_io_type_table[pred_table_index(io_type.tid)]; + + static const pred_vector_type pred_num_io_table(get_pred_num_io_table()); + pred |= pred_num_io_table[pred_table_index(num_inputs*num_outputs)]; + + if (pred == pred_table_wildcard) throw pred_error( + "unhanded input combination for make_pred()" + ); + + return pred; +} +""" + +def parse_tmpl(_tmpl_text, **kwargs): + from Cheetah.Template import Template + return str(Template(_tmpl_text, kwargs)) + +class ph: + bswap_p = 0b00001 + nswap_p = 0b00000 + item32_p = 0b00000 + sc8_p = 0b00000 + sc16_p = 0b00010 + fc32_p = 0b00100 + fc64_p = 0b00110 + chan1_p = 0b00000 + chan2_p = 0b01000 + chan3_p = 0b10000 + chan4_p = 0b11000 + +if __name__ == '__main__': + import sys, os + file = os.path.basename(__file__) + open(sys.argv[1], 'w').write(parse_tmpl(TMPL_TEXT, file=file, ph=ph)) diff --git a/host/lib/device.cpp b/host/lib/device.cpp new file mode 100644 index 000000000..0002bee6e --- /dev/null +++ b/host/lib/device.cpp @@ -0,0 +1,147 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/device.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/utils/algorithm.hpp> +#include <boost/foreach.hpp> +#include <boost/format.hpp> +#include <boost/weak_ptr.hpp> +#include <boost/functional/hash.hpp> +#include <boost/tuple/tuple.hpp> +#include <iostream> + +using namespace uhd; + +/*********************************************************************** + * Helper Functions + **********************************************************************/ +/*! + * Make a device hash that maps 1 to 1 with a device address. + * The hash will be used to identify created devices. + * \param dev_addr the device address + * \return the hash number + */ +static size_t hash_device_addr( + const device_addr_t &dev_addr +){ + //combine the hashes of sorted keys/value pairs + size_t hash = 0; + BOOST_FOREACH(const std::string &key, uhd::sorted(dev_addr.keys())){ + boost::hash_combine(hash, key); + boost::hash_combine(hash, dev_addr[key]); + } + return hash; +} + +/*********************************************************************** + * Registration + **********************************************************************/ +typedef boost::tuple<device::find_t, device::make_t> dev_fcn_reg_t; + +// instantiate the device function registry container +UHD_SINGLETON_FCN(std::vector<dev_fcn_reg_t>, get_dev_fcn_regs) + +void device::register_device( + const find_t &find, + const make_t &make +){ + //std::cout << "registering device" << std::endl; + get_dev_fcn_regs().push_back(dev_fcn_reg_t(find, make)); +} + +/*********************************************************************** + * Discover + **********************************************************************/ +device_addrs_t device::find(const device_addr_t &hint){ + device_addrs_t device_addrs; + + BOOST_FOREACH(const dev_fcn_reg_t &fcn, get_dev_fcn_regs()){ + try{ + device_addrs_t discovered_addrs = fcn.get<0>()(hint); + device_addrs.insert( + device_addrs.begin(), + discovered_addrs.begin(), + discovered_addrs.end() + ); + } + catch(const std::exception &e){ + std::cerr << "Device discovery error: " << e.what() << std::endl; + } + } + + return device_addrs; +} + +/*********************************************************************** + * Make + **********************************************************************/ +device::sptr device::make(const device_addr_t &hint, size_t which){ + typedef boost::tuple<device_addr_t, make_t> dev_addr_make_t; + std::vector<dev_addr_make_t> dev_addr_makers; + + BOOST_FOREACH(const dev_fcn_reg_t &fcn, get_dev_fcn_regs()){ + BOOST_FOREACH(device_addr_t dev_addr, fcn.get<0>()(hint)){ + //append the discovered address and its factory function + dev_addr_makers.push_back(dev_addr_make_t(dev_addr, fcn.get<1>())); + } + } + + //check that we found any devices + if (dev_addr_makers.size() == 0){ + throw uhd::key_error(str( + boost::format("No devices found for ----->\n%s") % hint.to_pp_string() + )); + } + + //check that the which index is valid + if (dev_addr_makers.size() <= which){ + throw uhd::index_error(str( + boost::format("No device at index %d for ----->\n%s") % which % hint.to_pp_string() + )); + } + + //create a unique hash for the device address + device_addr_t dev_addr; make_t maker; + boost::tie(dev_addr, maker) = dev_addr_makers.at(which); + size_t dev_hash = hash_device_addr(dev_addr); + //std::cout << boost::format("Hash: %u") % dev_hash << std::endl; + + //copy keys that were in hint but not in dev_addr + //this way, we can pass additional transport arguments + BOOST_FOREACH(const std::string &key, hint.keys()){ + if (not dev_addr.has_key(key)) dev_addr[key] = hint[key]; + } + + //map device address hash to created devices + static uhd::dict<size_t, boost::weak_ptr<device> > hash_to_device; + + //try to find an existing device + try{ + UHD_ASSERT_THROW(hash_to_device.has_key(dev_hash)); + UHD_ASSERT_THROW(not hash_to_device[dev_hash].expired()); + return hash_to_device[dev_hash].lock(); + } + //create and register a new device + catch(const uhd::assertion_error &){ + device::sptr dev = maker(dev_addr); + hash_to_device[dev_hash] = dev; + return dev; + } +} diff --git a/host/lib/exception.cpp b/host/lib/exception.cpp new file mode 100644 index 000000000..ecb1fe768 --- /dev/null +++ b/host/lib/exception.cpp @@ -0,0 +1,43 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/exception.hpp> +#include <boost/functional/hash.hpp> +#include <boost/format.hpp> + +using namespace uhd; + +exception::exception(const std::string &what): + std::runtime_error(what){/* NOP */} + +#define make_exception_impl(name, class, base) \ + class::class(const std::string &what): \ + base(str(boost::format("%s: %s") % name % what)){} \ + unsigned class::code(void) const{return boost::hash<std::string>()(#class) & 0xfff;} + +make_exception_impl("AssertionError", assertion_error, exception) +make_exception_impl("LookupError", lookup_error, exception) +make_exception_impl("IndexError", index_error, lookup_error) +make_exception_impl("KeyError", key_error, lookup_error) +make_exception_impl("TypeError", type_error, exception) +make_exception_impl("ValueError", value_error, exception) +make_exception_impl("RuntimeError", runtime_error, exception) +make_exception_impl("NotImplementedError", not_implemented_error, runtime_error) +make_exception_impl("EnvironmentError", environment_error, exception) +make_exception_impl("IOError", io_error, environment_error) +make_exception_impl("OSError", os_error, environment_error) +make_exception_impl("SystemError", system_error, exception) diff --git a/host/lib/ic_reg_maps/CMakeLists.txt b/host/lib/ic_reg_maps/CMakeLists.txt new file mode 100644 index 000000000..9e1f4705e --- /dev/null +++ b/host/lib/ic_reg_maps/CMakeLists.txt @@ -0,0 +1,95 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# This file included, use CMake directory variables +######################################################################## + +INCLUDE_DIRECTORIES(${CMAKE_CURRENT_BINARY_DIR}) +SET(LIBUHD_PYTHON_GEN_SOURCE_DEPS ${CMAKE_CURRENT_SOURCE_DIR}/common.py) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_adf4350_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/adf4350_regs.hpp +) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_adf4360_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/adf4360_regs.hpp +) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_ad9510_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/ad9510_regs.hpp +) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_ad9777_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/ad9777_regs.hpp +) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_ad5623_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/ad5623_regs.hpp +) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_ad7922_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/ad7922_regs.hpp +) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_max2829_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/max2829_regs.hpp +) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_max2118_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/max2118_regs.hpp +) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_max2112_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/max2112_regs.hpp +) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_max2112_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/max2112_regs.hpp +) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_ad9862_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/ad9862_regs.hpp +) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_ad9522_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/ad9522_regs.hpp +) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_ads62p44_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/ads62p44_regs.hpp +) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_tuner_4937di5_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/tuner_4937di5_regs.hpp +) + +UNSET(LIBUHD_PYTHON_GEN_SOURCE_DEPS) diff --git a/host/lib/ic_reg_maps/common.py b/host/lib/ic_reg_maps/common.py new file mode 100644 index 000000000..a509936b4 --- /dev/null +++ b/host/lib/ic_reg_maps/common.py @@ -0,0 +1,196 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +import re +import sys +import math +from Cheetah.Template import Template + +COMMON_TMPL = """\ +#import time +/*********************************************************************** + * This file was generated by $file on $time.strftime("%c") + **********************************************************************/ + +\#ifndef INCLUDED_$(name.upper())_HPP +\#define INCLUDED_$(name.upper())_HPP + +\#include <uhd/config.hpp> +\#include <uhd/exception.hpp> +\#include <boost/cstdint.hpp> +\#include <set> + +class $(name)_t{ +public: + #for $reg in $regs + #if $reg.get_enums() + enum $reg.get_type(){ + #for $i, $enum in enumerate($reg.get_enums()) + #set $end_comma = ',' if $i < len($reg.get_enums())-1 else '' + $(reg.get_name().upper())_$(enum[0].upper()) = $enum[1]$end_comma + #end for + }; + #end if + $reg.get_type() $reg.get_name(); + #end for + + $(name)_t(void){ + _state = NULL; + #for $reg in $regs + $reg.get_name() = $reg.get_default(); + #end for + } + + ~$(name)_t(void){ + delete _state; + } + + $body + + void save_state(void){ + if (_state == NULL) _state = new $(name)_t(); + #for $reg in $regs + _state->$reg.get_name() = this->$reg.get_name(); + #end for + } + + template<typename T> std::set<T> get_changed_addrs(void){ + if (_state == NULL) throw uhd::runtime_error("no saved state"); + //check each register for changes + std::set<T> addrs; + #for $reg in $regs + if(_state->$reg.get_name() != this->$reg.get_name()){ + addrs.insert($reg.get_addr()); + } + #end for + return addrs; + } + + #for $mreg in $mregs + $mreg.get_type() get_$(mreg.get_name())(void){ + return + #set $shift = 0 + #for $reg in $mreg.get_regs() + ($(mreg.get_type())($reg.get_name() & $reg.get_mask()) << $shift) | + #set $shift = $shift + $reg.get_bit_width() + #end for + 0; + } + + void set_$(mreg.get_name())($mreg.get_type() reg){ + #set $shift = 0 + #for $reg in $mreg.get_regs() + $reg.get_name() = (reg >> $shift) & $reg.get_mask(); + #set $shift = $shift + $reg.get_bit_width() + #end for + } + + #end for +private: + $(name)_t *_state; +}; + +\#endif /* INCLUDED_$(name.upper())_HPP */ +""" + +def parse_tmpl(_tmpl_text, **kwargs): + return str(Template(_tmpl_text, kwargs)) + +def to_num(arg): return int(eval(arg)) + +class reg: + def __init__(self, reg_des): + try: self.parse(reg_des) + except Exception, e: + raise Exception, 'Error parsing register description: "%s"\nWhat: %s'%(reg_des, e) + + def parse(self, reg_des): + x = re.match('^(\w*)\s*(\w*)\[(.*)\]\s*(\w*)\s*(.*)$', reg_des) + name, addr, bit_range, default, enums = x.groups() + + #store variables + self._name = name + self._addr = to_num(addr) + if ':' in bit_range: self._addr_spec = sorted(map(int, bit_range.split(':'))) + else: self._addr_spec = int(bit_range), int(bit_range) + self._default = to_num(default) + + #extract enum + self._enums = list() + if enums: + enum_val = 0 + for enum_str in map(str.strip, enums.split(',')): + if '=' in enum_str: + enum_name, enum_val = enum_str.split('=') + enum_val = to_num(enum_val) + else: enum_name = enum_str + self._enums.append((enum_name, enum_val)) + enum_val += 1 + + def get_addr(self): return self._addr + def get_enums(self): return self._enums + def get_name(self): return self._name + def get_default(self): + for key, val in self.get_enums(): + if val == self._default: return str.upper('%s_%s'%(self.get_name(), key)) + return self._default + def get_type(self): + if self.get_enums(): return '%s_t'%self.get_name() + return 'boost::uint%d_t'%max(2**math.ceil(math.log(self.get_bit_width(), 2)), 8) + def get_shift(self): return self._addr_spec[0] + def get_mask(self): return hex(int('1'*self.get_bit_width(), 2)) + def get_bit_width(self): return self._addr_spec[1] - self._addr_spec[0] + 1 + +class mreg: + def __init__(self, mreg_des, regs): + try: self.parse(mreg_des, regs) + except Exception, e: + raise Exception, 'Error parsing meta register description: "%s"\nWhat: %s'%(mreg_des, e) + + def parse(self, mreg_des, regs): + x = re.match('^~(\w*)\s+(.*)\s*$', mreg_des) + self._name, reg_names = x.groups() + regs_dict = dict([(reg.get_name(), reg) for reg in regs]) + self._regs = [regs_dict[reg_name] for reg_name in map(str.strip, reg_names.split(','))] + + def get_name(self): return self._name + def get_regs(self): return self._regs + def get_bit_width(self): return sum(map(reg.get_bit_width, self._regs)) + def get_type(self): + return 'boost::uint%d_t'%max(2**math.ceil(math.log(self.get_bit_width(), 2)), 8) + +def generate(name, regs_tmpl, body_tmpl='', file=__file__, append=False): + #evaluate the regs template and parse each line into a register + regs = list(); mregs = list() + for entry in parse_tmpl(regs_tmpl).splitlines(): + if entry.startswith('~'): mregs.append(mreg(entry, regs)) + else: regs.append(reg(entry)) + + #evaluate the body template with the list of registers + body = '\n '.join(parse_tmpl(body_tmpl, regs=regs).splitlines()) + + #evaluate the code template with the parsed registers and arguments + code = parse_tmpl(COMMON_TMPL, + name=name, + regs=regs, + mregs=mregs, + body=body, + file=file, + ) + + #write the generated code to file specified by argv1 + open(sys.argv[1], 'a' if append else 'w').write(code) diff --git a/host/lib/ic_reg_maps/gen_ad5623_regs.py b/host/lib/ic_reg_maps/gen_ad5623_regs.py new file mode 100755 index 000000000..e653921ba --- /dev/null +++ b/host/lib/ic_reg_maps/gen_ad5623_regs.py @@ -0,0 +1,48 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Template for raw text data describing registers +# name addr[bit range inclusive] default optional enums +######################################################################## +REGS_TMPL="""\ +data 0[4:15] 0 +addr 0[16:18] 0 DAC_A=0, DAC_B=1, ALL=7 +cmd 0[19:21] 0 wr_input_n, up_dac_n, wr_input_n_up_all, wr_up_dac_chan_n, power_down, reset, load_ldac +""" + +######################################################################## +# Template for methods in the body of the struct +######################################################################## +BODY_TMPL="""\ +boost::uint32_t get_reg(void){ + boost::uint32_t reg = 0; + #for $reg in filter(lambda r: r.get_addr() == 0, $regs) + reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + return reg; +} +""" + +if __name__ == '__main__': + import common; common.generate( + name='ad5623_regs', + regs_tmpl=REGS_TMPL, + body_tmpl=BODY_TMPL, + file=__file__, + ) diff --git a/host/lib/ic_reg_maps/gen_ad7922_regs.py b/host/lib/ic_reg_maps/gen_ad7922_regs.py new file mode 100755 index 000000000..5cec1924a --- /dev/null +++ b/host/lib/ic_reg_maps/gen_ad7922_regs.py @@ -0,0 +1,54 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Template for raw text data describing registers +# name addr[bit range inclusive] default optional enums +######################################################################## +REGS_TMPL="""\ +result 0[0:11] 0 +mod 0[12] 0 +chn 0[13] 0 +""" + +######################################################################## +# Template for methods in the body of the struct +######################################################################## +BODY_TMPL="""\ +boost::uint16_t get_reg(void){ + boost::uint16_t reg = 0; + #for $reg in filter(lambda r: r.get_addr() == 0, $regs) + reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + return reg; +} + +void set_reg(boost::uint16_t reg){ + #for $reg in filter(lambda r: r.get_addr() == 0, $regs) + $reg.get_name() = $(reg.get_type())((reg >> $reg.get_shift()) & $reg.get_mask()); + #end for +} +""" + +if __name__ == '__main__': + import common; common.generate( + name='ad7922_regs', + regs_tmpl=REGS_TMPL, + body_tmpl=BODY_TMPL, + file=__file__, + ) diff --git a/host/lib/ic_reg_maps/gen_ad9510_regs.py b/host/lib/ic_reg_maps/gen_ad9510_regs.py new file mode 100755 index 000000000..83236c921 --- /dev/null +++ b/host/lib/ic_reg_maps/gen_ad9510_regs.py @@ -0,0 +1,139 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Template for raw text data describing registers +# name addr[bit range inclusive] default optional enums +######################################################################## +REGS_TMPL="""\ +######################################################################## +## serial control port config +######################################################################## +long_instruction 0[4] 1 8bits, 16bits +soft_reset 0[5] 0 +lsb_first 0[6] 0 msb, lsb +sdo_inactive 0[7] 0 active, inactive +######################################################################## +## pll settings +######################################################################## +acounter 4[0:5] 0 +bcounter_msb 5[0:4] 0 +bcounter_lsb 6[0:7] 0 +lor_enable 7[2] 0 enb, dis +lor_ildd 7[5:6] 0 3cyc, 6cyc, 12cyc, 24cyc +charge_pump_mode 8[0:1] 0 3state, pump_up, pump_down, normal +pll_mux_control 8[2:5] 0 off, dld_high, ndiv, dld_low, rdiv, ald_nchan, acounter, prescaler, pfd_up, pfd_down, lor_high, 3state, ald_pchan, lor_lol_high, lor_lol_low, lor_low +pfd_polarity 8[6] 0 neg, pos +reset_all_counters 9[0] 0 +ncounter_reset 9[1] 0 +rcounter_reset 9[2] 0 +cp_current_setting 9[4:6] 0 0_60ma, 1_2ma, 1_8ma, 2_4ma, 3_0ma, 3_6ma, 4_2ma, 4_8ma +pll_power_down 0xA[0:1] 0 normal=0, async_pd=1, sync_pd=3 +prescaler_value 0xA[2:4] 0 div1, div2, 2_3, 4_5, 8_9, 16_17, 32_33, div3 +b_counter_bypass 0xA[6] 0 +ref_counter_msb 0xB[0:5] 0 +ref_counter_lsb 0xC[0:7] 0 +antibacklash_pw 0xD[0:1] 0 1_3ns, 2_9ns, 6_0ns +dld_window 0xD[5] 0 9_5ns, 3_5ns +lock_detect_disable 0xD[6] 0 enb, dis +######################################################################## +## fine delay adjust +######################################################################## +#for $i, $o in ((5, 0), (6, 4)) +delay_control_out$i $hex(0x34+$o)[0] 0 +ramp_current_out$i $hex(0x35+$o)[0:2] 0 200ua, 400ua, 600ua, 800ua, 1000ua, 1200ua, 1400ua, 1600ua +ramp_capacitor_out$i $hex(0x35+$o)[3:5] 0 4caps=0, 3caps=1, 2caps=3, 1cap=7 +delay_fine_adjust_out$i $hex(0x36+$o)[1:5] 0 +#end for +######################################################################## +## outputs +######################################################################## +#for $i, $o in ((0, 0), (1, 1), (2, 2), (3, 3)) +power_down_lvpecl_out$i $hex(0x3C+$o)[0:1] 0 normal, test, safe_pd, total_pd +output_level_lvpecl_out$i $hex(0x3C+$o)[2:3] 2 500mv, 340mv, 810mv, 660mv +#end for +#for $i, $o in ((4, 0), (5, 1), (6, 2), (7, 3)) +power_down_lvds_cmos_out$i $hex(0x40+$o)[0] 0 +output_level_lvds_out$i $hex(0x40+$o)[1:2] 1 1_75ma, 3_5ma, 5_25ma, 7ma +lvds_cmos_select_out$i $hex(0x40+$o)[3] 1 lvds, cmos +inverted_cmos_driver_out$i $hex(0x40+$o)[4] 0 dis, enb +#end for +clock_select 45[0] 1 clk2_drives, clk1_drives +clk1_power_down 45[1] 0 +clk2_power_down 45[2] 0 +prescaler_clock_pd 45[3] 0 +refin_power_down 45[4] 0 +all_clock_inputs_pd 45[5] 0 +######################################################################## +## dividers +######################################################################## +#for $i, $o in ((0, 0), (1, 2), (2, 4), (3, 6), (4, 8), (5, 10), (6, 12), (7, 14)) +divider_high_cycles_out$i $hex(0x48+$o)[0:3] 0 +divider_low_cycles_out$i $hex(0x48+$o)[4:7] 0 +phase_offset_out$i $hex(0x49+$o)[0:3] 0 +start_out$i $hex(0x49+$o)[4] 0 +force_out$i $hex(0x49+$o)[5] 0 +nosync_out$i $hex(0x49+$o)[6] 0 +bypass_divider_out$i $hex(0x49+$o)[7] 0 +#end for +######################################################################## +## function +######################################################################## +sync_detect_enable 58[0] 0 dis, enb +sync_select 58[1] 0 1_to_0_5, 0_5_to_1 +soft_sync 58[2] 0 +dist_power_down 58[3] 0 +sync_power_down 58[4] 0 +function_pin_select 58[5:6] 0 resetb, syncb, test, pdb +update_registers 0x5A[0] 0 +""" + +######################################################################## +# Template for methods in the body of the struct +######################################################################## +BODY_TMPL="""\ +boost::uint8_t get_reg(boost::uint16_t addr){ + boost::uint8_t reg = 0; + switch(addr){ + #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + break; + #end for + } + return reg; +} + +boost::uint32_t get_write_reg(boost::uint16_t addr){ + return (boost::uint32_t(addr) << 8) | get_reg(addr); +} + +boost::uint32_t get_read_reg(boost::uint16_t addr){ + return (boost::uint32_t(addr) << 8) | (1 << 23); +} +""" + +if __name__ == '__main__': + import common; common.generate( + name='ad9510_regs', + regs_tmpl=REGS_TMPL, + body_tmpl=BODY_TMPL, + file=__file__, + ) diff --git a/host/lib/ic_reg_maps/gen_ad9522_regs.py b/host/lib/ic_reg_maps/gen_ad9522_regs.py new file mode 100755 index 000000000..86605c34a --- /dev/null +++ b/host/lib/ic_reg_maps/gen_ad9522_regs.py @@ -0,0 +1,193 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Template for raw text data describing registers +# name addr[bit range inclusive] default optional enums +######################################################################## +REGS_TMPL="""\ +sdo_active 0x000[7] 0 sdio, sdo_sdio +lsb_first_addr_incr 0x000[6] 0 msb, lsb +soft_reset 0x000[5] 0 +mirror 0x000[3:0] 0 +readback_active_registers 0x004[0] 0 buffer, active +pfd_polarity 0x010[7] 0 pos, neg +cp_current 0x010[6:4] 7 0_6ma, 1_2ma, 1_8ma, 2_4ma, 3_0ma, 3_6ma, 4_2ma, 4_8ma +cp_mode 0x010[3:2] 3 high_imp, force_source, force_sink, normal +pll_power_down 0x010[1:0] 1 normal=0, async=1, sync=3 +r_counter_lsb 0x011[7:0] 1 +r_counter_msb 0x012[5:0] 0 +~r_counter r_counter_lsb, r_counter_msb +a_counter 0x013[5:0] 0 +b_counter_lsb 0x014[7:0] 3 +b_counter_msb 0x015[4:0] 0 +~b_counter b_counter_lsb, b_counter_msb +set_cp_pin_to_vcp_2 0x016[7] 0 normal, vcp_2 +reset_r_counter 0x016[6] 0 +reset_a_and_b_counters 0x016[5] 0 +reset_all_counters 0x016[4] 0 +b_counter_bypass 0x016[3] 0 normal, div1 +prescaler_p 0x016[2:0] 6 div1, div2, div2_3, div4_5, div8_9, div16_17, div32_33, div3 +status_pin_control 0x017[7:2] 0 +antibacklash_pulse_width 0x017[1:0] 0 2_9ns, 1_3ns, 6_0ns +enb_cmos_ref_input_dc_off 0x018[7] 0 +lock_detect_counter 0x018[6:5] 0 5cyc, 16cyc, 64cyc, 255cyc +digital_lock_detect_window 0x018[4] 0 high_range, low_range +disable_digital_lock_detect 0x018[3] 0 normal, disabled +vco_calibration_divider 0x018[2:1] 3 div2, div4, div8, div16 +vco_calibration_now 0x018[0] 0 +r_a_b_counters_sync_pin_rst 0x019[7:6] 0 nothing, async, sync +r_path_delay 0x019[5:3] 0 +n_path_delay 0x019[2:0] 0 +enable_status_pin_divider 0x01A[7] 0 +ref_freq_monitor_threshold 0x01A[6] 0 1_02mhz, 6khz +ld_pin_control 0x01A[5:0] 0 +enable_vco_freq_monitor 0x01B[7] 0 +enable_ref2_freq_monitor 0x01B[6] 0 +enable_ref1_freq_monitor 0x01B[5] 0 +refmon_pin_control 0x01B[4:0] 0 +disable_switchover_deglitch 0x01C[7] 0 +select_ref 0x01C[6] 0 ref1, ref2 +use_ref_sel_pin 0x01C[5] 0 register, ref_sel +enb_auto_ref_switchover 0x01C[4] 0 manual, auto +stay_on_ref2 0x01C[3] 0 return_ref1, stay_ref2 +enable_ref2 0x01C[2] 0 +enable_ref1 0x01C[1] 0 +enable_differential_ref 0x01C[0] 0 +enb_stat_eeprom_at_stat_pin 0x01D[7] 1 +enable_xtal_osc 0x01D[6] 0 +enable_clock_doubler 0x01D[5] 0 +disable_pll_status_reg 0x01D[4] 0 +enable_ld_pin_comparator 0x01D[3] 0 +enable_external_holdover 0x01D[1] 0 +enable_holdover 0x01D[0] 0 +external_zero_delay_fcds 0x01E[4:3] 0 +enable_external_zero_delay 0x01E[2] 0 +enable_zero_delay 0x01E[1] 0 +######################################################################## +vco_calibration_finished 0x01F[6] 0 +holdover_active 0x01F[5] 0 +ref2_selected 0x01F[4] 0 +vco_freq_gt_thresh 0x01F[3] 0 +ref2_freq_gt_thresh 0x01F[2] 0 +ref1_freq_gt_thresh 0x01F[1] 0 +digital_lock_detect 0x01F[0] 0 +######################################################################## +#for $i in range(12) +#set $addr = ($i + 0x0F0) +out$(i)_format $(addr)[7] 0 lvds, cmos +out$(i)_cmos_configuration $(addr)[6:5] 3 off, a_on, b_on, ab_on +out$(i)_polarity $(addr)[4:3] 0 lvds_a_non_b_inv=0, lvds_a_inv_b_non=1, cmos_ab_non=0, cmos_ab_inv=1, cmos_a_non_b_inv=2, cmos_a_inv_b_non=3 +out$(i)_lvds_diff_voltage $(addr)[2:1] 1 1_75ma, 3_5ma, 5_25ma, 7_0ma +out$(i)_lvds_power_down $(addr)[0] 0 +#end for +######################################################################## +#for $i in reversed(range(8)) +csdld_en_out_$i 0x0FC[$i] 0 ignore, async +#end for +######################################################################## +#for $i in reversed(range(4)) +csdld_en_out_$(8 + $i) 0x0FD[$i] 0 ignore, async +#end for +######################################################################## +#set $default_val = 0x7 +#for $i in range(4) +#set $addr0 = hex($i*3 + 0x190) +#set $addr1 = hex($i*3 + 0x191) +#set $addr2 = hex($i*3 + 0x192) +divider$(i)_low_cycles $(addr0)[7:4] $default_val +divider$(i)_high_cycles $(addr0)[3:0] $default_val +divider$(i)_bypass $(addr1)[7] 0 +divider$(i)_ignore_sync $(addr1)[6] 0 +divider$(i)_force_high $(addr1)[5] 0 +divider$(i)_start_high $(addr1)[4] 0 +divider$(i)_phase_offset $(addr1)[3:0] 0 +channel$(i)_power_down $(addr2)[2] 0 +disable_divider$(i)_ddc $(addr2)[0] 0 +#set $default_val /= 2 +#end for +######################################################################## +vco_divider 0x1E0[2:0] 2 div2, div3, div4, div5, div6, static, div1 +power_down_clock_input_sel 0x1E1[4] 0 +power_down_vco_clock_ifc 0x1E1[3] 0 +power_down_vco_and_clock 0x1E1[2] 0 +select_vco_or_clock 0x1E1[1] 0 external, vco +bypass_vco_divider 0x1E1[0] 0 +disable_power_on_sync 0x230[3] 0 +power_down_sync 0x230[2] 0 +power_down_dist_ref 0x230[1] 0 +soft_sync 0x230[0] 0 +io_update 0x232[0] 0 +soft_eeprom 0xB02[1] 0 +enable_eeprom_write 0xB02[0] 0 +reg2eeprom 0xB03[0] 0 +""" + +######################################################################## +# Template for methods in the body of the struct +######################################################################## +BODY_TMPL="""\ +boost::uint32_t get_reg(boost::uint16_t addr){ + boost::uint32_t reg = 0; + switch(addr){ + #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + reg |= (boost::uint8_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + break; + #end for + } + if (addr == 0){ //mirror 4 bits in register 0 + reg |= ((reg >> 7) & 0x1) << 0; + reg |= ((reg >> 6) & 0x1) << 1; + reg |= ((reg >> 5) & 0x1) << 2; + reg |= ((reg >> 4) & 0x1) << 3; + } + return reg; +} + +void set_reg(boost::uint16_t addr, boost::uint32_t reg){ + switch(addr){ + #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + $reg.get_name() = $(reg.get_type())((reg >> $reg.get_shift()) & $reg.get_mask()); + #end for + break; + #end for + } +} + +boost::uint32_t get_write_reg(boost::uint16_t addr){ + return (boost::uint32_t(addr) << 8) | get_reg(addr); +} + +boost::uint32_t get_read_reg(boost::uint16_t addr){ + return (boost::uint32_t(addr) << 8) | (1 << 23); +} + +""" + +if __name__ == '__main__': + import common; common.generate( + name='ad9522_regs', + regs_tmpl=REGS_TMPL, + body_tmpl=BODY_TMPL, + file=__file__, + ) diff --git a/host/lib/ic_reg_maps/gen_ad9777_regs.py b/host/lib/ic_reg_maps/gen_ad9777_regs.py new file mode 100755 index 000000000..47b61cf44 --- /dev/null +++ b/host/lib/ic_reg_maps/gen_ad9777_regs.py @@ -0,0 +1,120 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Template for raw text data describing registers +# name addr[bit range inclusive] default optional enums +######################################################################## +REGS_TMPL="""\ +######################################################################## +## address 0 +######################################################################## +sdio_bidirectional 0[7] 0 input, io +lsb_msb_first 0[6] 0 msb, lsb +soft_reset 0[5] 0 +sleep_mode 0[4] 0 +power_down_mode 0[3] 0 +x_1r_2r_mode 0[2] 0 2r, 1r +pll_lock_indicator 0[1] 0 +######################################################################## +## address 1 +######################################################################## +filter_interp_rate 1[6:7] 0 1x, 2x, 4x, 8x +modulation_mode 1[4:5] 0 none, fs_2, fs_4, fs_8 +zero_stuff_mode 1[3] 0 +mix_mode 1[2] 1 complex, real +modulation_form 1[1] 0 e_minus_jwt, e_plus_jwt +data_clk_pll_lock_sel 1[0] 0 pll_lock, data_clk +######################################################################## +## address 2 +######################################################################## +signed_input_data 2[7] 0 signed, unsigned +two_port_mode 2[6] 0 two_port, one_port +dataclk_driver_strength 2[5] 0 weak, strong +dataclk_invert 2[4] 0 +oneportclk_invert 2[2] 0 +iqsel_invert 2[1] 0 +iq_first 2[0] 0 i_first, q_first +######################################################################## +## address 3 +######################################################################## +data_rate_clock_output 3[7] 0 pll_lock, spi_sdo +pll_divide_ratio 3[0:1] 0 div1, div2, div4, div8 +######################################################################## +## address 4 +######################################################################## +pll_state 4[7] 0 off, on +auto_cp_control 4[6] 0 auto, manual +pll_cp_control 4[0:2] 0 50ua=0, 100ua=1, 200ua=2, 400ua=3, 800ua=7 +######################################################################## +## address 5 and 9 +######################################################################## +idac_fine_gain_adjust 5[0:7] 0 +qdac_fine_gain_adjust 9[0:7] 0 +######################################################################## +## address 6 and A +######################################################################## +idac_coarse_gain_adjust 6[0:3] 0 +qdac_coarse_gain_adjust 0xA[0:3] 0 +######################################################################## +## address 7, 8 and B, C +######################################################################## +idac_offset_adjust_msb 7[0:7] 0 +idac_offset_adjust_lsb 8[0:1] 0 +~idac_offset_adjust idac_offset_adjust_lsb, idac_offset_adjust_msb +idac_ioffset_direction 8[7] 0 out_a, out_b +qdac_offset_adjust_msb 0xB[0:7] 0 +qdac_offset_adjust_lsb 0xC[0:1] 0 +~qdac_offset_adjust qdac_offset_adjust_lsb, qdac_offset_adjust_msb +qdac_ioffset_direction 0xC[7] 0 out_a, out_b +""" + +######################################################################## +# Template for methods in the body of the struct +######################################################################## +BODY_TMPL="""\ +boost::uint8_t get_reg(boost::uint8_t addr){ + boost::uint8_t reg = 0; + switch(addr){ + #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + reg |= (boost::uint8_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + break; + #end for + } + return reg; +} + +boost::uint16_t get_write_reg(boost::uint8_t addr){ + return (boost::uint16_t(addr) << 8) | get_reg(addr); +} + +boost::uint16_t get_read_reg(boost::uint8_t addr){ + return (boost::uint16_t(addr) << 8) | (1 << 7); +} +""" + +if __name__ == '__main__': + import common; common.generate( + name='ad9777_regs', + regs_tmpl=REGS_TMPL, + body_tmpl=BODY_TMPL, + file=__file__, + ) diff --git a/host/lib/ic_reg_maps/gen_ad9862_regs.py b/host/lib/ic_reg_maps/gen_ad9862_regs.py new file mode 100755 index 000000000..00340224c --- /dev/null +++ b/host/lib/ic_reg_maps/gen_ad9862_regs.py @@ -0,0 +1,246 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Template for raw text data describing registers +# name addr[bit range inclusive] default optional enums +######################################################################## +REGS_TMPL="""\ +######################################################################## +## General +######################################################################## +sdio_bidir 0[7] 0 sdio_sdo, sdio +lsb_first 0[6] 0 msb, lsb +soft_reset 0[5] 0 +######################################################################## +## Rx Power Down +######################################################################## +vref_diff_pd 1[7] 0 +vref_pd 1[6] 0 +rx_digital_pd 1[5] 0 +rx_channel_b_pd 1[4] 0 +rx_channel_a_pd 1[3] 0 +buffer_b_pd 1[2] 0 +buffer_a_pd 1[1] 0 +all_rx_pd 1[0] 0 +######################################################################## +## Rx A and B +######################################################################## +#for $x, $i in (('a', 2), ('b', 3)) +byp_buffer_$x $(i)[7] 0 +rx_pga_$x $(i)[0:4] 0 +#end for +######################################################################## +## Rx Misc +######################################################################## +hs_duty_cycle 4[2] 0 +shared_ref 4[1] 0 +clk_duty 4[0] 0 +######################################################################## +## RX I/F (INTERFACE) +######################################################################## +three_state 5[4] 0 +rx_retime 5[3] 0 clkout1, clkout2 +rx_twos_comp 5[2] 0 +inv_rxsync 5[1] 0 +mux_out 5[0] 0 rx_mux_mode=1, dual_port_mode=0 +######################################################################## +## RX Digital +######################################################################## +two_channel 6[3] 1 rx_b_dis, both_enb +rx_keep_ve 6[2] 0 pass_pos, pass_neg +rx_hilbert 6[1] 0 dis, enb +decimate 6[0] 0 dis, enb +######################################################################## +## TX Power Down +######################################################################## +alt_timing_mode 8[5] 0 +txoff_enable 8[4] 0 +tx_digital_pd 8[3] 0 +tx_analog_pd 8[0:2] 0 none=0, txb=4, txa=2, both=7 +######################################################################## +## Tx Offset and Gain +######################################################################## +#for $x, $i, $j, $k in (('a', 10, 11, 14), ('b', 12, 13, 15)) +dac_$(x)_offset_1_0 $(i)[6:7] 0 +dac_$(x)_offset_dir $(i)[0] 0 neg_diff, pos_dif +dac_$(x)_offset_9_2 $(j)[0:7] 0 +dac_$(x)_coarse_gain $(k)[6:7] 0 +dac_$(x)_fine_gain $(k)[0:5] 0 +#end for +tx_pga_gain 16[0:7] 0 +######################################################################## +## Tx Misc +######################################################################## +tx_slave_enable 17[1] 0 +tx_pga_mode 17[0] 0 normal, fast +######################################################################## +## Tx IF (INTERFACE) +######################################################################## +tx_retime 18[6] 1 clkout1=1, clkout2=0 +qi_order 18[5] 0 iq, qi +inv_txsync 18[4] 0 +tx_twos_comp 18[3] 0 +inverse_samp 18[2] 0 rise, fall +edges 18[1] 0 normal, both +interleaved 18[0] 0 single, interleaved +######################################################################## +## TX Digital +######################################################################## +two_data_paths 19[4] 0 single, both +tx_keep_ve 19[3] 0 pass_pos, pass_neg +tx_hilbert 19[2] 0 dis, enb +interp 19[0:1] 0 1, 2, 4 +######################################################################## +## TX Modulator +######################################################################## +neg_fine_tune 20[5] 0 pos_shift, neg_shift +fine_mode 20[4] 0 bypass, nco +real_mix_mode 20[3] 0 complex, real +neg_coarse_tune 20[2] 0 pos_shift, neg_shift +coarse_mod 20[0:1] 0 bypass, fdac_4, fdac_8 +######################################################################## +## NCO Tuning Word +######################################################################## +ftw_7_0 21[0:7] 0 +ftw_15_8 22[0:7] 0 +ftw_23_16 23[0:7] 0 +######################################################################## +## DLL +######################################################################## +input_clk_ctrl 24[6] 0 internal, external +adc_div2 24[5] 0 normal, div2 +dll_mult 24[3:4] 0 1, 2, 4 +dll_pd 24[2] 0 +dll_mode 24[0] 0 slow, fast +######################################################################## +## Clock Out +######################################################################## +clkout2_div_factor 25[6:7] 0 1, 2, 4, 8 +inv2 25[5] 0 normal, inverted +inv1 25[1] 0 normal, inverted +dis2 25[4] 0 enb, dis +dis1 25[0] 0 enb, dis +######################################################################## +## Aux ADC +######################################################################## +#for $x, $i in (('a2', 26), ('a1', 28), ('b2', 30), ('b1', 32)) +aux_adc_$(x)_1_0 $(i)[6:7] 0 +aux_adc_$(x)_9_2 $int(1+$i)[0:7] 0 +#end for +######################################################################## +## Aux ADC Control +######################################################################## +aux_spi 34[7] 0 dis, enb +sel_bnota 34[6] 0 adc_a, adc_b +#for $x, $i in (('b', 5), ('a', 2)) +refsel_$(x) 34[$i] 0 external, internal +select_$(x) 34[$int($i-1)] 0 aux_adc2, aux_adc1 +start_$(x) 34[$int($i-2)] 0 +#end for +######################################################################## +## Aux ADC Clock +######################################################################## +clk_4 35[0] 0 1_2, 1_4 +######################################################################## +## Aux DAC +######################################################################## +#for $x, $i in (('a', 36), ('b', 37), ('c', 38)) +aux_dac_$x $(i)[0:7] 0 +#end for +######################################################################## +## Aux DAC Update +######################################################################## +aux_dac_slave_enable 39[7] 0 +aux_dacupdate_c 39[2] 0 +aux_dacupdate_b 39[1] 0 +aux_dacupdate_a 39[0] 0 +######################################################################## +## AUX DAC Power Down +######################################################################## +aux_dac_pd_a 40[2] 0 +aux_dac_pd_b 40[1] 0 +aux_dac_pd_c 40[0] 0 +######################################################################## +## AUX DAC Control +######################################################################## +aux_dac_invert_a 41[2] 0 +aux_dac_invert_b 41[1] 0 +aux_dac_invert_c 41[0] 0 +######################################################################## +## Sig Delt +######################################################################## +sig_delt_3_0 42[4:7] 0 +sig_delt_11_4 43[0:7] 0 +######################################################################## +## ADC Low Power +######################################################################## +rx_low_power_mode_r49 49[0:7] 0 +rx_low_power_mode_r50 50[0:7] 0 +######################################################################## +## Chip ID +######################################################################## +chip_id 63[0:7] 0 +""" + +######################################################################## +# Header and Source templates below +######################################################################## +BODY_TMPL=""" +boost::uint8_t get_reg(boost::uint8_t addr){ + boost::uint8_t reg = 0; + switch(addr){ + #for $addr in range(0, 63+1) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + reg |= (boost::uint16_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + break; + #end for + } + return reg; +} + +void set_reg(boost::uint8_t addr, boost::uint16_t reg){ + switch(addr){ + #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + $reg.get_name() = $(reg.get_type())((reg >> $reg.get_shift()) & $reg.get_mask()); + #end for + break; + #end for + } +} + +boost::uint16_t get_write_reg(boost::uint8_t addr){ + return (boost::uint16_t(addr) << 8) | get_reg(addr); +} + +boost::uint16_t get_read_reg(boost::uint8_t addr){ + return (boost::uint16_t(addr) << 8) | (1 << 15); +} +""" + +if __name__ == '__main__': + import common; common.generate( + name='ad9862_regs', + regs_tmpl=REGS_TMPL, + body_tmpl=BODY_TMPL, + file=__file__, + ) diff --git a/host/lib/ic_reg_maps/gen_adf4350_regs.py b/host/lib/ic_reg_maps/gen_adf4350_regs.py new file mode 100755 index 000000000..e97772843 --- /dev/null +++ b/host/lib/ic_reg_maps/gen_adf4350_regs.py @@ -0,0 +1,121 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Template for raw text data describing registers +# name addr[bit range inclusive] default optional enums +######################################################################## +REGS_TMPL="""\ +######################################################################## +## address 0 +######################################################################## +frac_12_bit 0[3:14] 0 +int_16_bit 0[15:30] 0x23 +##reserved 0[31] 0 +######################################################################## +## address 1 +######################################################################## +mod_12_bit 1[3:14] 0xfff +phase_12_bit 1[15:26] 0 +prescaler 1[27] 0 4_5, 8_9 +##reserved 1[28:31] 0 +######################################################################## +## address 2 +######################################################################## +counter_reset 2[3] 0 disabled, enabled +cp_three_state 2[4] 0 disabled, enabled +power_down 2[5] 0 disabled, enabled +pd_polarity 2[6] 1 negative, positive +ldp 2[7] 0 10ns, 6ns +ldf 2[8] 0 frac_n, int_n +#set $current_setting_enums = ', '.join(map(lambda x: '_'.join(("%0.2fma"%(round(x*31.27 + 31.27)/100)).split('.')), range(0,16))) +charge_pump_current 2[9:12] 5 $current_setting_enums +double_buffer 2[13] 0 disabled, enabled +r_counter_10_bit 2[14:23] 0 +reference_divide_by_2 2[24] 1 disabled, enabled +reference_doubler 2[25] 0 disabled, enabled +muxout 2[26:28] 1 3state, dvdd, dgnd, rdiv, ndiv, analog_ld, dld, reserved +low_noise_and_spur 2[29:30] 3 low_noise, reserved0, reserved1, low_spur +######################################################################## +## address 3 +######################################################################## +clock_divider_12_bit 3[3:14] 0 +clock_div_mode 3[15:16] 0 clock_divider_off, fast_lock, resync_enable, reserved +##reserved 3[17] 0 +cycle_slip_reduction 3[18] 0 disabled, enabled +##reserved 3[19:20] 0 +##reserved 3[21:31] 0 +######################################################################## +## address 4 +######################################################################## +output_power 4[3:4] 3 m4dbm, m1dbm, 2dbm, 5dbm +rf_output_enable 4[5] 1 disabled, enabled +aux_output_power 4[6:7] 0 m4dbm, m1dbm, 2dbm, 5dbm +aux_output_enable 4[8] 0 disabled, enabled +aux_output_select 4[9] 1 divided, fundamental +mute_till_lock_detect 4[10] 0 mute_disabled, mute_enabled +vco_power_down 4[11] 0 vco_powered_up, vco_powered_down +band_select_clock_div 4[12:19] 0 +rf_divider_select 4[20:22] 0 div1, div2, div4, div8, div16 +feedback_select 4[23] 1 divided, fundamental +##reserved 4[24:31] 0 +######################################################################## +## address 5 +######################################################################## +##reserved 5[3:18] 0 +##reserved 5[19:20] 0 +##reserved 5[21] 0 +ld_pin_mode 5[22:23] 1 low0, dld, low, high +##reserved 5[24:31] 0 +""" + +######################################################################## +# Template for methods in the body of the struct +######################################################################## +BODY_TMPL="""\ +enum addr_t{ + ADDR_R0 = 0, + ADDR_R1 = 1, + ADDR_R2 = 2, + ADDR_R3 = 3, + ADDR_R4 = 4, + ADDR_R5 = 5 +}; + +boost::uint32_t get_reg(boost::uint8_t addr){ + boost::uint32_t reg = addr & 0x7; + switch(addr){ + #for $addr in range(5+1) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + break; + #end for + } + return reg; +} +""" + +if __name__ == '__main__': + import common; common.generate( + name='adf4350_regs', + regs_tmpl=REGS_TMPL, + body_tmpl=BODY_TMPL, + file=__file__, + ) diff --git a/host/lib/ic_reg_maps/gen_adf4360_regs.py b/host/lib/ic_reg_maps/gen_adf4360_regs.py new file mode 100755 index 000000000..3fd8707a7 --- /dev/null +++ b/host/lib/ic_reg_maps/gen_adf4360_regs.py @@ -0,0 +1,89 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Template for raw text data describing registers +# name addr[bit range inclusive] default optional enums +######################################################################## +REGS_TMPL="""\ +######################################################################## +## address 0 +######################################################################## +core_power_level 0[2:3] 0 5ma, 10ma, 15ma, 20ma +counter_operation 0[4] 0 normal, reset +muxout_control 0[5:7] 0 3state, dld, ndiv, dvdd, rdiv, nchan_od_ld, sdo, dgnd +phase_detector_polarity 0[8] 0 neg, pos +charge_pump_output 0[9] 0 normal, 3state +cp_gain_0 0[10] 0 set1, set2 +mute_till_ld 0[11] 0 dis, enb +output_power_level 0[12:13] 0 3_5ma, 5_0ma, 7_5ma, 11_0ma +#set $current_setting_enums = ', '.join(map(lambda x: x+"ma", "0_31 0_62 0_93 1_25 1_56 1_87 2_18 2_50".split())) +current_setting1 0[14:16] 0 $current_setting_enums +current_setting2 0[17:19] 0 $current_setting_enums +power_down 0[20:21] 0 normal_op=0, async_pd=1, sync_pd=3 +prescaler_value 0[22:23] 0 8_9, 16_17, 32_33 +######################################################################## +## address 2 +######################################################################## +a_counter 2[2:6] 0 +b_counter 2[8:20] 0 +cp_gain_1 2[21] 0 set1, set2 +divide_by_2_output 2[22] 0 fund, div2 +divide_by_2_prescaler 2[23] 0 fund, div2 +######################################################################## +## address 1 +######################################################################## +r_counter 1[2:15] 0 +ablpw 1[16:17] 0 3_0ns, 1_3ns, 6_0ns +lock_detect_precision 1[18] 0 3cycles, 5cycles +test_mode_bit 1[19] 0 +band_select_clock_div 1[20:21] 0 1, 2, 4, 8 +""" + +######################################################################## +# Template for methods in the body of the struct +######################################################################## +BODY_TMPL="""\ +enum addr_t{ + ADDR_CONTROL = 0, + ADDR_NCOUNTER = 2, + ADDR_RCOUNTER = 1 +}; + +boost::uint32_t get_reg(addr_t addr){ + boost::uint32_t reg = addr & 0x3; + switch(addr){ + #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + break; + #end for + } + return reg; +} +""" + +if __name__ == '__main__': + import common; common.generate( + name='adf4360_regs', + regs_tmpl=REGS_TMPL, + body_tmpl=BODY_TMPL, + file=__file__, + ) diff --git a/host/lib/ic_reg_maps/gen_ads62p44_regs.py b/host/lib/ic_reg_maps/gen_ads62p44_regs.py new file mode 100755 index 000000000..f0a84d940 --- /dev/null +++ b/host/lib/ic_reg_maps/gen_ads62p44_regs.py @@ -0,0 +1,124 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Template for raw text data describing registers +# name addr[bit range inclusive] default optional enums +######################################################################## +REGS_TMPL="""\ +######################################################################## +## address 0 +######################################################################## +reset 0[1] 0 +serial_readout 0[0] 0 +######################################################################## +## address 16 +######################################################################## +clkout_strength 16[6:7] 0 weaker=1, default=0, stronger=3 +######################################################################## +## address 17 +######################################################################## +dataout_strength 17[0:1] 0 weaker=1, default=0, stronger=3, maximum=2 +lvds_current 17[2:3] 0 3_5ma, 2_5ma, 4_5ma, 1_75ma +lvds_current_double 17[4:5] 0 default, dblclk, dbldataclock +######################################################################## +## address 18 +######################################################################## +lvds_clk_term 18[0:2] 0 none, 300, 180, 110, 150, 100, 81, 60 +lvds_data_term 18[3:5] 0 none, 300, 180, 110, 150, 100, 81, 60 +######################################################################## +## address 19 +######################################################################## +offset_freeze 19[4] 0 +######################################################################## +## address 20 +######################################################################## +power_down 20[0:2] 0 normal, a_dis, b_dis, ab_dis, global_pd, a_sby, b_sby, mux +ref_select 20[3] 0 internal, external +coarse_gain 20[4] 0 0db, 3_5db +output_interface 20[5] 0 cmos, lvds +override 20[7] 0 +######################################################################## +## address 22 +######################################################################## +test_patterns 22[0:2] 0 normal, zeros, ones, toggle, ramp, custom +lvds_bytewise 22[3] 0 +data_format 22[4] 0 twos_complement, binary +######################################################################## +## address 23 +######################################################################## +fine_gain 23[0:3] 0 +######################################################################## +## address 24 and 25 +######################################################################## +custom_low 24[0:7] 0 +custom_high 25[0:5] 0 +######################################################################## +## address 26 +######################################################################## +gain_correction 26[0:3] 0 +offset_tc 26[4:6] 0 1_1s, 0_55s, 0_27s, 0_13s, 2_15s, 4_3s +low_latency 26[7] 0 +######################################################################## +## address 27 +######################################################################## +decimation 27[0:2] 0 decimate_2, decimate_4, decimate_1, decimate_8 +odd_tap_enable 27[3] 0 +filter_enable 27[4] 0 +filter_coeff_sel 27[5] 0 predefined, userdefined +offset_enable 27[7] 0 +######################################################################## +## address 29 +######################################################################## +decimation_filter_bands 29[0:1] 0 +""" + +######################################################################## +# Template for methods in the body of the struct +######################################################################## +BODY_TMPL="""\ +boost::uint8_t get_reg(boost::uint8_t addr){ + boost::uint8_t reg = 0; + switch(addr){ + #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + reg |= (boost::uint8_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + break; + #end for + } + return reg; +} + +boost::uint16_t get_write_reg(boost::uint8_t addr){ + return (boost::uint16_t(addr) << 8) | get_reg(addr); +} + +boost::uint16_t get_read_reg(boost::uint8_t addr){ + return (boost::uint16_t(addr) << 8) | (1 << 7); +} +""" + +if __name__ == '__main__': + import common; common.generate( + name='ads62p44_regs', + regs_tmpl=REGS_TMPL, + body_tmpl=BODY_TMPL, + file=__file__, + ) diff --git a/host/lib/ic_reg_maps/gen_max2112_regs.py b/host/lib/ic_reg_maps/gen_max2112_regs.py new file mode 100755 index 000000000..c2fc4e3e2 --- /dev/null +++ b/host/lib/ic_reg_maps/gen_max2112_regs.py @@ -0,0 +1,181 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Template for raw text data describing write registers +# name addr[bit range inclusive] default optional enums +######################################################################## +WRITE_REGS_TMPL="""\ +######################################################################## +## Note: offsets given from perspective of data bits (excludes address) +######################################################################## +## +######################################################################## +## N-Divider MSB (0) Write +######################################################################## +frac 0[7] 1 invalid, frac +n_divider_msb 0[0:6] 0 +######################################################################## +## N-Divider LSB (1) Write +######################################################################## +n_divider_lsb 1[0:7] 0x23 +~n_divider n_divider_lsb, n_divider_msb +######################################################################## +## Charge Pump (2) Write +######################################################################## +cpmp 2[6:7] 0 +cplin 2[4:5] 1 +f_divider_mmsb 2[0:3] 0x2 +######################################################################## +## F-Divider MSB (3) Write +######################################################################## +f_divider_msb 3[0:7] 0xF6 +######################################################################## +## F-Divider LSB (4) Write +######################################################################## +f_divider_lsb 4[0:7] 0x84 +~f_divider f_divider_lsb, f_divider_msb, f_divider_mmsb +######################################################################## +## XTAL-Divider R-Divider (5) Write +######################################################################## +#set $xtal_divider_names = ', '.join(map(lambda x: 'div' + str(x), range(1,9))) +xtal_divider 5[5:7] 0 $xtal_divider_names +r_divider 5[0:4] 1 +######################################################################## +## PLL (6) Write +######################################################################## +d24 6[7] 1 div2, div4 ## div2 for LO <= 1125M, div4 > 1125M +cps 6[6] 1 i_cp_from_icp, i_cp_from_vas +icp 6[5] 0 i_cp_600ua, i_cp_1200ua +##reserved 6[0:4] 0 +######################################################################## +## VCO (7) Write +######################################################################## +vco 7[3:7] 0x19 +vas 7[2] 1 disabled, enabled +adl 7[1] 1 disabled, enabled +ade 7[0] 1 disabled, enabled +######################################################################## +## LPF (8) Write +######################################################################## +lp 8[0:7] 0x4B ## map(lambda x: "%0.2f"%((4e6 + (x - 12) * 290e3)/1e6), range(255)) in MHz +######################################################################## +## Control (9) Write +######################################################################## +stby 9[7] 0 normal, disable_sig_and_synth +##reserved 9[6] 0 +pwdn 9[5] 0 normal, invalid +##reserved 9[4] 0 +bbg 9[0:3] 0 ## Baseband Gain in dB +######################################################################## +## Shutdown (0xA) Write +######################################################################## +##reserved 0xA[7] 0 +pll_shutdown 0xA[6] 0 normal, shutdown +div_shutdown 0xA[5] 0 normal, shutdown +vco_shutdown 0xA[4] 0 normal, shutdown +bb_shutdown 0xA[3] 0 normal, shutdown +rfmix_shutdown 0xA[2] 0 normal, shutdown +rfvga_shutdown 0xA[1] 0 normal, shutdown +fe_shutdown 0xA[0] 0 normal, shutdown +######################################################################## +## Test (0xB) Write +######################################################################## +cptst 0xB[5:7] 0 +##reserved 0xB[4] 0 +turbo 0xB[3] 1 +ld_mux 0xB[0:2] 0 refout=0, invalid +""" + +######################################################################## +# Template for raw text data describing read registers +# name addr[bit range inclusive] default optional enums +######################################################################## +READ_REGS_TMPL="""\ +######################################################################## +## Status Byte-1 (0xC) Read +######################################################################## +por 0xC[7] 0 read, reset +vasa 0xC[6] 0 vas_fail, vas_win +vase 0xC[5] 0 active, inactive +ld 0xC[4] 0 unlocked, locked +##reserved 0xC[0:3] 0 +######################################################################## +## Status Byte-2 (0xD) Read +######################################################################## +vcosbr 0xD[3:7] 0 ## vco band readback +adc 0xD[0:2] 0 ool0, lock0, vaslock0, vaslock1, vaslock2, vaslock3, lock1, ool1 +""" + +######################################################################## +# Template for methods in the body of the struct +######################################################################## +BODY_TMPL="""\ +boost::uint8_t get_reg(boost::uint8_t addr){ + boost::uint8_t reg = 0; + switch(addr){ + #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + reg |= (boost::uint8_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + break; + #end for + } + return boost::uint8_t(reg); +} + +void set_reg(boost::uint8_t addr, boost::uint8_t reg){ + switch(addr){ + #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + $reg.get_name() = $(reg.get_type())((reg >> $reg.get_shift()) & $reg.get_mask()); + #end for + break; + #end for + } +} +""" + +SPLIT_REGS_HELPER_TMPL="""\ +#for $divname in ['n','f'] +void set_$(divname)_divider(boost::uint32_t $divname){ + #for $regname in sorted(map(lambda r: r.get_name(), filter(lambda r: r.get_name().find(divname + '_divider') == 0, $regs))) + #end for +} +#end for +""" + #$regname = boost::uint8_t($divname & $regs[regname].get_mask()); + #$divname = boost::uint32_t($divname >> $regs[regname].get_shift()); + +if __name__ == '__main__': + import common; common.generate( + name='max2112_write_regs', + regs_tmpl=WRITE_REGS_TMPL, + body_tmpl=BODY_TMPL, + file=__file__, + ) + + import common; common.generate( + name='max2112_read_regs', + regs_tmpl=READ_REGS_TMPL, + body_tmpl=BODY_TMPL, + file=__file__, + append=True, + ) diff --git a/host/lib/ic_reg_maps/gen_max2118_regs.py b/host/lib/ic_reg_maps/gen_max2118_regs.py new file mode 100755 index 000000000..506fbaec8 --- /dev/null +++ b/host/lib/ic_reg_maps/gen_max2118_regs.py @@ -0,0 +1,126 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Template for raw text data describing write registers +# name addr[bit range inclusive] default optional enums +######################################################################## +WRITE_REGS_TMPL="""\ +######################################################################## +## Note: offsets given from perspective of data bits (excludes address) +######################################################################## +## +######################################################################## +## N-Divider MSB (0) Write +######################################################################## +div2 0[7] 0 div4, div2 +n_divider_msb 0[0:6] 3 +######################################################################## +## N-Divider LSB (1) Write +######################################################################## +n_divider_lsb 1[0:7] 0xB6 +~n_divider n_divider_lsb, n_divider_msb +######################################################################## +## R, Charge Pump, and VCO (2) Write +######################################################################## +#set $r_divider_names = ', '.join(map(lambda x: 'div' + str(2**(x+1)), range(0,8))) +r_divider 2[5:7] 1 $r_divider_names +#set $cp_current_bias = ', '.join(map(lambda x: 'i_cp_%dua'%(50*2**x), range(0,4))) +cp_current 2[3:4] 3 $cp_current_bias +osc_band 2[0:2] 5 +######################################################################## +## I/Q Filter DAC (3) Write +######################################################################## +##unused 3[7] 0 +f_dac 3[0:6] 0x7F ## filter tuning dac, depends on m +######################################################################## +## LPF Divider DAC (4) Write +######################################################################## +adl_vco_adc_latch 4[7] 0 disabled, enabled +ade_vco_ade_read 4[6] 0 disabled, enabled +dl_output_drive 4[5] 0 iq_590m_vpp, iq_1_vpp +m_divider 4[0:4] 2 ## filter tuning counter +######################################################################## +## GC2 and Diag (5) Write +######################################################################## +diag 5[5:7] 0 normal, cp_i_source, cp_i_sink, cp_high_z, unused, n_and_filt, r_and_gc2, m_div +gc2 5[0:4] 0x1F ## Step Size: 0-1: 0dB, 2-22: 1dB, 23-31: 0.5dB +""" + +######################################################################## +# Template for raw text data describing read registers +# name addr[bit range inclusive] default optional enums +######################################################################## +READ_REGS_TMPL="""\ +######################################################################## +## Status (0) Read +######################################################################## +pwr 0[6] 0 not_reset, reset +adc 0[2:4] 0 ## VCO tuning voltage, Lock Status +######################################################################## +## I/Q Filter DAC (1) Read +######################################################################## +filter_dac 1[0:6] 0 ## I/Q Filter tuning DAC, current +""" + +######################################################################## +# Template for methods in the body of the struct +######################################################################## +BODY_TMPL="""\ +boost::uint8_t get_reg(boost::uint8_t addr){ + boost::uint8_t reg = 0; + switch(addr){ + #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + reg |= (boost::uint8_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + break; + #end for + } + return boost::uint8_t(reg); +} + +void set_reg(boost::uint8_t addr, boost::uint8_t reg){ + switch(addr){ + #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + $reg.get_name() = $(reg.get_type())((reg >> $reg.get_shift()) & $reg.get_mask()); + #end for + break; + #end for + } +} +""" + +if __name__ == '__main__': + import common; common.generate( + name='max2118_write_regs', + regs_tmpl=WRITE_REGS_TMPL, + body_tmpl=BODY_TMPL, + file=__file__, + ) + + import common; common.generate( + name='max2118_read_regs', + regs_tmpl=READ_REGS_TMPL, + body_tmpl=BODY_TMPL, + file=__file__, + append=True, + ) diff --git a/host/lib/ic_reg_maps/gen_max2829_regs.py b/host/lib/ic_reg_maps/gen_max2829_regs.py new file mode 100755 index 000000000..383131c18 --- /dev/null +++ b/host/lib/ic_reg_maps/gen_max2829_regs.py @@ -0,0 +1,133 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Template for raw text data describing registers +# name addr[bit range inclusive] default optional enums +######################################################################## +REGS_TMPL="""\ +######################################################################## +## Note: offsets given from perspective of data bits (excludes address) +######################################################################## +## +######################################################################## +## Standby (2) +######################################################################## +_set_to_1_2_0 2[0] 1 +_set_to_1_2_1 2[1] 1 +_set_to_1_2_2 2[2] 1 +pa_bias_dac 2[10] 0 +voltage_ref 2[11] 0 +_set_to_1_2_12 2[12] 1 +mimo_select 2[13] 0 normal, mimo +######################################################################## +## Integer Divider Ratio (3) +######################################################################## +int_div_ratio_word 3[0:7] 0xa2 +frac_div_ratio_lsb 3[12:13] 0 +######################################################################## +## Fractional Divider Ratio (4) +######################################################################## +frac_div_ratio_msb 4[0:13] 0 +######################################################################## +## Band Select and PLL (5) +######################################################################## +band_select 5[0] 0 2_4ghz, 5ghz +ref_divider 5[1:3] 1 +pll_cp_select 5[5] 1 2ma, 4ma +band_select_802_11a 5[6] 0 4_9ghz_to_5_35ghz, 5_47ghz_to_5_875ghz +vco_bandswitch 5[7] 0 disable, automatic +vco_spi_bandswitch 5[8] 0 fsm, spi +vco_sub_band 5[9:10] 0 +_set_to_1_5_11 5[11] 1 +_set_to_1_5_12 5[12] 1 +band_sel_mimo 5[13] 0 normal, mimo +######################################################################## +## Calibration (6) +######################################################################## +rx_cal_mode 6[0] 0 dis, enb +tx_cal_mode 6[1] 0 dis, enb +_set_to_1_6_10 6[10] 1 +iq_cal_gain 6[11:12] 3 8db, 18db, 24db, 34db +######################################################################## +## Lowpass Filter (7) +######################################################################## +rx_lpf_fine_adj 7[0:2] 2 90, 95, 100, 105, 110 +rx_lpf_coarse_adj 7[3:4] 1 7_5mhz, 9_5mhz, 14mhz, 18mhz +tx_lpf_coarse_adj 7[5:6] 1 12mhz=1, 18mhz=2, 24mhz=3 +rssi_high_bw 7[11] 0 2mhz, 6mhz +######################################################################## +## Rx Control/RSSI (8) +######################################################################## +_set_to_1_8_0 8[0] 1 +rx_highpass 8[2] 1 100hz, 30khz +_set_to_1_8_5 8[5] 1 +rssi_pin_fcn 8[8] 0 rssi, temp +rssi_op_mode 8[10] 0 rssi_rxhp, enabled +rssi_output_range 8[11] 0 low, high +rx_vga_gain_spi 8[12] 0 io, spi +######################################################################## +## Tx Linearity/Baseband Gain (9) +######################################################################## +tx_baseband_gain 9[0:1] 0 0db, 2db, 3_5db, 5db +tx_upconv_linearity 9[2:3] 0 50, 63, 78, 100 +tx_vga_linearity 9[6:7] 0 50, 63, 78, 100 +pa_driver_linearity 9[8:9] 2 50, 63, 78, 100 +tx_vga_gain_spi 9[10] 0 io, spi +######################################################################## +## PA Bias DAC (10) +######################################################################## +pa_bias_dac_out_curr 10[0:5] 0 +pa_bias_dac_delay 10[6:9] 0xf +######################################################################## +## Rx Gain (11) +######################################################################## +rx_vga_gain 11[0:4] 0x1f +rx_lna_gain 11[5:6] 3 +######################################################################## +## Tx VGA Gain (12) +######################################################################## +tx_vga_gain 12[0:5] 0 +""" + +######################################################################## +# Template for methods in the body of the struct +######################################################################## +BODY_TMPL="""\ +boost::uint32_t get_reg(boost::uint8_t addr){ + boost::uint16_t reg = 0; + switch(addr){ + #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + reg |= (boost::uint16_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + break; + #end for + } + return (boost::uint32_t(reg) << 4) | (addr & 0xf); +} +""" + +if __name__ == '__main__': + import common; common.generate( + name='max2829_regs', + regs_tmpl=REGS_TMPL, + body_tmpl=BODY_TMPL, + file=__file__, + ) diff --git a/host/lib/ic_reg_maps/gen_tuner_4937di5_regs.py b/host/lib/ic_reg_maps/gen_tuner_4937di5_regs.py new file mode 100644 index 000000000..73f7aa3db --- /dev/null +++ b/host/lib/ic_reg_maps/gen_tuner_4937di5_regs.py @@ -0,0 +1,75 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Template for raw text data describing registers +# name addr[bit range inclusive] default optional enums +######################################################################## +REGS_TMPL="""\ +######################################################################## +## Note: offsets given from perspective of data bits (excludes address) +######################################################################## +## Divider byte 1 +######################################################################## +db1 0[0:6] 0x00 +######################################################################## +## Divider byte 2 +######################################################################## +db2 1[0:7] 0x00 +######################################################################## +## Control byte 1 +######################################################################## +cb7 2[7] 0x01 +cp 2[6] 0x00 low,high +os 2[0] 0x00 on,off +rs 2[1:2] 0x00 d512=3,d640=0,d1024=1 +test 2[3:5] 0x01 normal=0x01,cpoff=0x02,cpsink=0x06,cpsrc=0x07,cptest1=0x04,cptest2=0x05 +######################################################################## +## Control byte 2 +######################################################################## +bandsel 3[4:7] 0x03 uhf=0x03,vhfhi=0x09,vhflo=0x0a +power 3[3] 0x00 on,off +""" + +######################################################################## +# Template for methods in the body of the struct +######################################################################## +BODY_TMPL="""\ +boost::uint8_t get_reg(boost::uint8_t addr){ + boost::uint8_t reg = 0; + switch(addr){ + #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + reg |= (boost::uint8_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + break; + #end for + } + return boost::uint8_t(reg); +} + +""" + +if __name__ == '__main__': + import common; common.generate( + name='tuner_4937di5_regs', + regs_tmpl=REGS_TMPL, + body_tmpl=BODY_TMPL, + file=__file__, + ) diff --git a/host/lib/transport/CMakeLists.txt b/host/lib/transport/CMakeLists.txt new file mode 100644 index 000000000..a5bf9c5f1 --- /dev/null +++ b/host/lib/transport/CMakeLists.txt @@ -0,0 +1,96 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# This file included, use CMake directory variables +######################################################################## + +######################################################################## +# Setup libusb +######################################################################## +MESSAGE(STATUS "") +FIND_PACKAGE(USB1) + +LIBUHD_REGISTER_COMPONENT("USB" ENABLE_USB ON "ENABLE_LIBUHD;LIBUSB_FOUND" OFF) + +IF(ENABLE_USB) + MESSAGE(STATUS "USB support enabled via libusb.") + INCLUDE_DIRECTORIES(${LIBUSB_INCLUDE_DIR}) + LIBUHD_APPEND_LIBS(${LIBUSB_LIBRARIES}) + LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/libusb1_control.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/libusb1_zero_copy.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/libusb1_base.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/libusb1_base.hpp + ) +ELSE(ENABLE_USB) + LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/usb_dummy_impl.cpp + ) +ENDIF(ENABLE_USB) + +######################################################################## +# Setup defines for interface address discovery +######################################################################## +MESSAGE(STATUS "") +MESSAGE(STATUS "Configuring interface address discovery...") +INCLUDE(CheckCXXSourceCompiles) +INCLUDE(CheckIncludeFileCXX) + +CHECK_CXX_SOURCE_COMPILES(" + #include <ifaddrs.h> + int main(){ + struct ifaddrs *ifap; + getifaddrs(&ifap); + return 0; + } + " HAVE_GETIFADDRS +) + +CHECK_INCLUDE_FILE_CXX(winsock2.h HAVE_WINSOCK2_H) + +IF(HAVE_GETIFADDRS) + MESSAGE(STATUS " Interface address discovery supported through getifaddrs.") + SET(IF_ADDRS_DEFS HAVE_GETIFADDRS) +ELSEIF(HAVE_WINSOCK2_H) + MESSAGE(STATUS " Interface address discovery supported through SIO_GET_INTERFACE_LIST.") + SET(IF_ADDRS_DEFS HAVE_SIO_GET_INTERFACE_LIST) +ELSE() + MESSAGE(STATUS " Interface address discovery not supported.") + SET(IF_ADDRS_DEFS HAVE_IF_ADDRS_DUMMY) +ENDIF() + +SET_SOURCE_FILES_PROPERTIES( + ${CMAKE_CURRENT_SOURCE_DIR}/if_addrs.cpp + PROPERTIES COMPILE_DEFINITIONS "${IF_ADDRS_DEFS}" +) + +######################################################################## +# Append to the list of sources for lib uhd +######################################################################## +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_CURRENT_SOURCE_DIR}/gen_vrt_if_packet.py + ${CMAKE_CURRENT_BINARY_DIR}/vrt_if_packet.cpp +) + +LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/buffer_pool.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/if_addrs.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/udp_simple.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/udp_zero_copy.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/vrt_packet_handler.hpp +) diff --git a/host/lib/transport/buffer_pool.cpp b/host/lib/transport/buffer_pool.cpp new file mode 100644 index 000000000..971bbb75a --- /dev/null +++ b/host/lib/transport/buffer_pool.cpp @@ -0,0 +1,80 @@ +// +// Copyright 2011-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/transport/buffer_pool.hpp> +#include <boost/shared_array.hpp> +#include <vector> + +using namespace uhd::transport; + +//! pad the byte count to a multiple of alignment +static size_t pad_to_boundary(const size_t bytes, const size_t alignment){ + return bytes + (alignment - bytes)%alignment; +} + +/*********************************************************************** + * Buffer pool implementation + **********************************************************************/ +class buffer_pool_impl : public buffer_pool{ +public: + buffer_pool_impl( + const std::vector<ptr_type> &ptrs, + boost::shared_array<char> mem + ): _ptrs(ptrs), _mem(mem){ + /* NOP */ + } + + ptr_type at(const size_t index) const{ + return _ptrs.at(index); + } + + size_t size(void) const{ + return _ptrs.size(); + } + +private: + std::vector<ptr_type> _ptrs; + boost::shared_array<char> _mem; +}; + +/*********************************************************************** + * Buffer pool factor function + **********************************************************************/ +buffer_pool::sptr buffer_pool::make( + const size_t num_buffs, + const size_t buff_size, + const size_t alignment +){ + //1) pad the buffer size to be a multiple of alignment + //2) pad the overall memory size for room after alignment + //3) allocate the memory in one block of sufficient size + const size_t padded_buff_size = pad_to_boundary(buff_size, alignment); + boost::shared_array<char> mem(new char[padded_buff_size*num_buffs + alignment-1]); + + //Fill a vector with boundary-aligned points in the memory + const size_t mem_start = pad_to_boundary(size_t(mem.get()), alignment); + std::vector<ptr_type> ptrs(num_buffs); + for (size_t i = 0; i < num_buffs; i++){ + ptrs[i] = ptr_type(mem_start + padded_buff_size*i); + } + + //Create a new buffer pool implementation with: + // - the pre-computed pointers, and + // - the reference to allocated memory. + return sptr(new buffer_pool_impl(ptrs, mem)); +} + diff --git a/host/lib/transport/gen_vrt_if_packet.py b/host/lib/transport/gen_vrt_if_packet.py new file mode 100755 index 000000000..8481932ed --- /dev/null +++ b/host/lib/transport/gen_vrt_if_packet.py @@ -0,0 +1,256 @@ +#!/usr/bin/env python +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +""" +The vrt packer/unpacker code generator: + +This script will generate the pack and unpack routines that convert +metatdata into vrt headers and vrt headers into metadata. + +The generated code infers jump tables to speed-up the parsing time. +""" + +TMPL_TEXT = """ +#import time +/*********************************************************************** + * This file was generated by $file on $time.strftime("%c") + **********************************************************************/ + +\#include <uhd/exception.hpp> +\#include <uhd/transport/vrt_if_packet.hpp> +\#include <uhd/utils/byteswap.hpp> +\#include <boost/detail/endian.hpp> +\#include <vector> + +//define the endian macros to convert integers +\#ifdef BOOST_BIG_ENDIAN + \#define BE_MACRO(x) (x) + \#define LE_MACRO(x) uhd::byteswap(x) +\#else + \#define BE_MACRO(x) uhd::byteswap(x) + \#define LE_MACRO(x) (x) +\#endif + +using namespace uhd; +using namespace uhd::transport; + +typedef size_t pred_type; +typedef std::vector<pred_type> pred_table_type; +#define pred_table_index(hdr) ((hdr >> 20) & 0x1ff) + +static pred_table_type get_pred_unpack_table(void){ + pred_table_type table(1 << 9, 0); //only 9 bits useful here (20-28) + for (size_t i = 0; i < table.size(); i++){ + boost::uint32_t vrt_hdr_word = i << 20; + if(vrt_hdr_word & $hex(0x1 << 28)) table[i] |= $hex($sid_p); + if(vrt_hdr_word & $hex(0x1 << 27)) table[i] |= $hex($cid_p); + if(vrt_hdr_word & $hex(0x3 << 22)) table[i] |= $hex($tsi_p); + if(vrt_hdr_word & $hex(0x3 << 20)) table[i] |= $hex($tsf_p); + if(vrt_hdr_word & $hex(0x1 << 26)) table[i] |= $hex($tlr_p); + } + return table; +} + +static const pred_table_type pred_unpack_table(get_pred_unpack_table()); + +######################################################################## +#def gen_code($XE_MACRO, $suffix) +######################################################################## + +void vrt::if_hdr_pack_$(suffix)( + boost::uint32_t *packet_buff, + if_packet_info_t &if_packet_info +){ + boost::uint32_t vrt_hdr_flags = 0; + + pred_type pred = 0; + if (if_packet_info.has_sid) pred |= $hex($sid_p); + if (if_packet_info.has_cid) pred |= $hex($cid_p); + if (if_packet_info.has_tsi) pred |= $hex($tsi_p); + if (if_packet_info.has_tsf) pred |= $hex($tsf_p); + if (if_packet_info.has_tlr) pred |= $hex($tlr_p); + + switch(pred){ + #for $pred in range(2**5) + case $pred: + #set $num_header_words = 1 + #set $flags = 0 + ########## Stream ID ########## + #if $pred & $sid_p + packet_buff[$num_header_words] = $(XE_MACRO)(if_packet_info.sid); + #set $num_header_words += 1 + #set $flags |= (0x1 << 28); + #end if + ########## Class ID ########## + #if $pred & $cid_p + packet_buff[$num_header_words] = 0; //not implemented + #set $num_header_words += 1 + packet_buff[$num_header_words] = 0; //not implemented + #set $num_header_words += 1 + #set $flags |= (0x1 << 27); + #end if + ########## Integer Time ########## + #if $pred & $tsi_p + packet_buff[$num_header_words] = $(XE_MACRO)(if_packet_info.tsi); + #set $num_header_words += 1 + #set $flags |= (0x3 << 22); + #end if + ########## Fractional Time ########## + #if $pred & $tsf_p + packet_buff[$num_header_words] = $(XE_MACRO)(boost::uint32_t(if_packet_info.tsf >> 32)); + #set $num_header_words += 1 + packet_buff[$num_header_words] = $(XE_MACRO)(boost::uint32_t(if_packet_info.tsf >> 0)); + #set $num_header_words += 1 + #set $flags |= (0x1 << 20); + #end if + ########## Trailer ########## + #if $pred & $tlr_p + //packet_buff[$num_header_words+if_packet_info.num_payload_words32] = $(XE_MACRO)(if_packet_info.tlr); + #set $flags |= (0x1 << 26); + #set $num_trailer_words = 1; + #else + #set $num_trailer_words = 0; + #end if + ########## Variables ########## + if_packet_info.num_header_words32 = $num_header_words; + if_packet_info.num_packet_words32 = $($num_header_words + $num_trailer_words) + if_packet_info.num_payload_words32; + vrt_hdr_flags = $hex($flags); + break; + #end for + } + + //set the burst flags + if (if_packet_info.sob) vrt_hdr_flags |= $hex(0x1 << 25); + if (if_packet_info.eob) vrt_hdr_flags |= $hex(0x1 << 24); + + //fill in complete header word + packet_buff[0] = $(XE_MACRO)(boost::uint32_t(0 + | vrt_hdr_flags + | ((if_packet_info.packet_count & 0xf) << 16) + | (if_packet_info.num_packet_words32 & 0xffff) + )); +} + +void vrt::if_hdr_unpack_$(suffix)( + const boost::uint32_t *packet_buff, + if_packet_info_t &if_packet_info +){ + //extract vrt header + boost::uint32_t vrt_hdr_word = $(XE_MACRO)(packet_buff[0]); + /* + size_t packet_words32 = vrt_hdr_word & 0xffff; + + //failure case + if (if_packet_info.num_packet_words32 < packet_words32) + throw uhd::value_error("bad vrt header or packet fragment"); + */ + //Fix for short packets sent from the fpga: + // Use the num_packet_words32 passed in as input, + // and do not use the header bits which could be wrong. + size_t packet_words32 = if_packet_info.num_packet_words32; + + //extract fields from the header + if_packet_info.packet_type = if_packet_info_t::packet_type_t(vrt_hdr_word >> 29); + if_packet_info.packet_count = (vrt_hdr_word >> 16) & 0xf; + //if_packet_info.sob = bool(vrt_hdr_word & $hex(0x1 << 25)); //not implemented + //if_packet_info.eob = bool(vrt_hdr_word & $hex(0x1 << 24)); //not implemented + + const pred_type pred = pred_unpack_table[pred_table_index(vrt_hdr_word)]; + + switch(pred){ + #for $pred in range(2**5) + case $pred: + #set $has_time_spec = False + #set $num_header_words = 1 + ########## Stream ID ########## + #if $pred & $sid_p + if_packet_info.has_sid = true; + if_packet_info.sid = $(XE_MACRO)(packet_buff[$num_header_words]); + #set $num_header_words += 1 + #else + if_packet_info.has_sid = false; + #end if + ########## Class ID ########## + #if $pred & $cid_p + if_packet_info.has_cid = true; + if_packet_info.cid = 0; //not implemented + #set $num_header_words += 2 + #else + if_packet_info.has_cid = false; + #end if + ########## Integer Time ########## + #if $pred & $tsi_p + if_packet_info.has_tsi = true; + if_packet_info.tsi = $(XE_MACRO)(packet_buff[$num_header_words]); + #set $num_header_words += 1 + #else + if_packet_info.has_tsi = false; + #end if + ########## Fractional Time ########## + #if $pred & $tsf_p + if_packet_info.has_tsf = true; + if_packet_info.tsf = boost::uint64_t($(XE_MACRO)(packet_buff[$num_header_words])) << 32; + #set $num_header_words += 1 + if_packet_info.tsf |= $(XE_MACRO)(packet_buff[$num_header_words]); + #set $num_header_words += 1 + #else + if_packet_info.has_tsf = false; + #end if + ########## Trailer ########## + #if $pred & $tlr_p + if_packet_info.has_tlr = true; + if_packet_info.tlr = $(XE_MACRO)(packet_buff[packet_words32-1]); + #set $num_trailer_words = 1; + #else + if_packet_info.has_tlr = false; + #set $num_trailer_words = 0; + #end if + ########## Variables ########## + //another failure case + if (packet_words32 < $($num_header_words + $num_trailer_words)) + throw uhd::value_error("bad vrt header or invalid packet length"); + if_packet_info.num_header_words32 = $num_header_words; + if_packet_info.num_payload_words32 = packet_words32 - $($num_header_words + $num_trailer_words); + break; + #end for + } +} + +######################################################################## +#end def +######################################################################## + +$gen_code("BE_MACRO", "be") +$gen_code("LE_MACRO", "le") +""" + +def parse_tmpl(_tmpl_text, **kwargs): + from Cheetah.Template import Template + return str(Template(_tmpl_text, kwargs)) + +if __name__ == '__main__': + import sys + open(sys.argv[1], 'w').write(parse_tmpl( + TMPL_TEXT, + file=__file__, + sid_p = 0b00001, + cid_p = 0b00010, + tsi_p = 0b00100, + tsf_p = 0b01000, + tlr_p = 0b10000, + )) diff --git a/host/lib/transport/if_addrs.cpp b/host/lib/transport/if_addrs.cpp new file mode 100644 index 000000000..b7c8ad844 --- /dev/null +++ b/host/lib/transport/if_addrs.cpp @@ -0,0 +1,110 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/transport/if_addrs.hpp> +#include <boost/asio/ip/address_v4.hpp> +#include <boost/cstdint.hpp> +#include <iostream> + +/*********************************************************************** + * Interface address discovery through ifaddrs api + **********************************************************************/ +#ifdef HAVE_GETIFADDRS +#include <ifaddrs.h> + +static boost::asio::ip::address_v4 sockaddr_to_ip_addr(sockaddr *addr){ + return boost::asio::ip::address_v4(ntohl( + reinterpret_cast<sockaddr_in*>(addr)->sin_addr.s_addr + )); +} + +std::vector<uhd::transport::if_addrs_t> uhd::transport::get_if_addrs(void){ + std::vector<if_addrs_t> if_addrs; + struct ifaddrs *ifap; + if (getifaddrs(&ifap) == 0){ + for (struct ifaddrs *iter = ifap; iter != NULL; iter = iter->ifa_next){ + //ensure that the entries are valid + if (iter->ifa_addr == NULL) continue; + if (iter->ifa_addr->sa_family != AF_INET) continue; + if (iter->ifa_netmask->sa_family != AF_INET) continue; + if (iter->ifa_broadaddr->sa_family != AF_INET) continue; + + //append a new set of interface addresses + if_addrs_t if_addr; + if_addr.inet = sockaddr_to_ip_addr(iter->ifa_addr).to_string(); + if_addr.mask = sockaddr_to_ip_addr(iter->ifa_netmask).to_string(); + if_addr.bcast = sockaddr_to_ip_addr(iter->ifa_broadaddr).to_string(); + if_addrs.push_back(if_addr); + } + freeifaddrs(ifap); + } + return if_addrs; +} + +#endif /* HAVE_GETIFADDRS */ + +/*********************************************************************** + * Interface address discovery through windows api + **********************************************************************/ +#ifdef HAVE_SIO_GET_INTERFACE_LIST +#include <winsock2.h> + +std::vector<uhd::transport::if_addrs_t> uhd::transport::get_if_addrs(void){ + std::vector<if_addrs_t> if_addrs; + SOCKET sd = WSASocket(AF_INET, SOCK_DGRAM, 0, 0, 0, 0); + if (sd == SOCKET_ERROR) { + std::cerr << "Failed to get a socket. Error " << WSAGetLastError() << + std::endl; return if_addrs; + } + + INTERFACE_INFO InterfaceList[20]; + unsigned long nBytesReturned; + if (WSAIoctl(sd, SIO_GET_INTERFACE_LIST, 0, 0, &InterfaceList, + sizeof(InterfaceList), &nBytesReturned, 0, 0) == SOCKET_ERROR) { + std::cerr << "Failed calling WSAIoctl: error " << WSAGetLastError() << + std::endl; + return if_addrs; + } + + int nNumInterfaces = nBytesReturned / sizeof(INTERFACE_INFO); + for (int i = 0; i < nNumInterfaces; ++i) { + boost::uint32_t iiAddress = ntohl(reinterpret_cast<sockaddr_in&>(InterfaceList[i].iiAddress).sin_addr.s_addr); + boost::uint32_t iiNetmask = ntohl(reinterpret_cast<sockaddr_in&>(InterfaceList[i].iiNetmask).sin_addr.s_addr); + boost::uint32_t iiBroadcastAddress = (iiAddress & iiNetmask) | ~iiNetmask; + + if_addrs_t if_addr; + if_addr.inet = boost::asio::ip::address_v4(iiAddress).to_string(); + if_addr.mask = boost::asio::ip::address_v4(iiNetmask).to_string(); + if_addr.bcast = boost::asio::ip::address_v4(iiBroadcastAddress).to_string(); + if_addrs.push_back(if_addr); + } + + return if_addrs; +} + +#endif /* HAVE_SIO_GET_INTERFACE_LIST */ + +/*********************************************************************** + * Interface address discovery not included + **********************************************************************/ +#ifdef HAVE_IF_ADDRS_DUMMY + +std::vector<uhd::transport::if_addrs_t> uhd::transport::get_if_addrs(void){ + return std::vector<if_addrs_t>(); +} + +#endif /* HAVE_IF_ADDRS_DUMMY */ diff --git a/host/lib/transport/libusb1_base.cpp b/host/lib/transport/libusb1_base.cpp new file mode 100644 index 000000000..6d4df7875 --- /dev/null +++ b/host/lib/transport/libusb1_base.cpp @@ -0,0 +1,265 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "libusb1_base.hpp" +#include <uhd/exception.hpp> +#include <uhd/types/dict.hpp> +#include <boost/weak_ptr.hpp> +#include <boost/foreach.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::transport; + +/*********************************************************************** + * libusb session + **********************************************************************/ +class libusb_session_impl : public libusb::session{ +public: + libusb_session_impl(void){ + UHD_ASSERT_THROW(libusb_init(&_context) == 0); + libusb_set_debug(_context, debug_level); + } + + ~libusb_session_impl(void){ + libusb_exit(_context); + } + + libusb_context *get_context(void) const{ + return _context; + } + +private: + libusb_context *_context; +}; + +libusb::session::sptr libusb::session::get_global_session(void){ + static boost::weak_ptr<session> global_session; + + //not expired -> get existing session + if (not global_session.expired()) return global_session.lock(); + + //create a new global session + sptr new_global_session(new libusb_session_impl()); + global_session = new_global_session; + return new_global_session; +} + +/*********************************************************************** + * libusb device + **********************************************************************/ +class libusb_device_impl : public libusb::device{ +public: + libusb_device_impl(libusb_device *dev){ + _session = libusb::session::get_global_session(); + _dev = dev; + } + + ~libusb_device_impl(void){ + libusb_unref_device(this->get()); + } + + libusb_device *get(void) const{ + return _dev; + } + +private: + libusb::session::sptr _session; //always keep a reference to session + libusb_device *_dev; +}; + +/*********************************************************************** + * libusb device list + **********************************************************************/ +class libusb_device_list_impl : public libusb::device_list{ +public: + libusb_device_list_impl(void){ + libusb::session::sptr sess = libusb::session::get_global_session(); + + //allocate a new list of devices + libusb_device** dev_list; + ssize_t ret = libusb_get_device_list(sess->get_context(), &dev_list); + if (ret < 0) throw uhd::os_error("cannot enumerate usb devices"); + + //fill the vector of device references + for (size_t i = 0; i < size_t(ret); i++) _devs.push_back( + libusb::device::sptr(new libusb_device_impl(dev_list[i])) + ); + + //free the device list but dont unref (done in ~device) + libusb_free_device_list(dev_list, false/*dont unref*/); + } + + size_t size(void) const{ + return _devs.size(); + } + + libusb::device::sptr at(size_t i) const{ + return _devs.at(i); + } + +private: + std::vector<libusb::device::sptr> _devs; +}; + +libusb::device_list::sptr libusb::device_list::make(void){ + return sptr(new libusb_device_list_impl()); +} + +/*********************************************************************** + * libusb device descriptor + **********************************************************************/ +class libusb_device_descriptor_impl : public libusb::device_descriptor{ +public: + libusb_device_descriptor_impl(libusb::device::sptr dev){ + _dev = dev; + UHD_ASSERT_THROW(libusb_get_device_descriptor(_dev->get(), &_desc) == 0); + } + + const libusb_device_descriptor &get(void) const{ + return _desc; + } + + std::string get_ascii_serial(void) const{ + if (this->get().iSerialNumber == 0) return ""; + + libusb::device_handle::sptr handle( + libusb::device_handle::get_cached_handle(_dev) + ); + + unsigned char buff[512]; + ssize_t ret = libusb_get_string_descriptor_ascii( + handle->get(), this->get().iSerialNumber, buff, sizeof(buff) + ); + if (ret < 0) return ""; //on error, just return empty string + + return std::string((char *)buff, ret); + } + +private: + libusb::device::sptr _dev; //always keep a reference to device + libusb_device_descriptor _desc; +}; + +libusb::device_descriptor::sptr libusb::device_descriptor::make(device::sptr dev){ + return sptr(new libusb_device_descriptor_impl(dev)); +} + +/*********************************************************************** + * libusb device handle + **********************************************************************/ +class libusb_device_handle_impl : public libusb::device_handle{ +public: + libusb_device_handle_impl(libusb::device::sptr dev){ + _dev = dev; + UHD_ASSERT_THROW(libusb_open(_dev->get(), &_handle) == 0); + } + + ~libusb_device_handle_impl(void){ + //release all claimed interfaces + for (size_t i = 0; i < _claimed.size(); i++){ + libusb_release_interface(this->get(), _claimed[i]); + } + libusb_close(_handle); + } + + libusb_device_handle *get(void) const{ + return _handle; + } + + void claim_interface(int interface){ + UHD_ASSERT_THROW(libusb_claim_interface(this->get(), interface) == 0); + _claimed.push_back(interface); + } + +private: + libusb::device::sptr _dev; //always keep a reference to device + libusb_device_handle *_handle; + std::vector<int> _claimed; +}; + +libusb::device_handle::sptr libusb::device_handle::get_cached_handle(device::sptr dev){ + static uhd::dict<libusb_device *, boost::weak_ptr<device_handle> > handles; + + //not expired -> get existing handle + if (handles.has_key(dev->get()) and not handles[dev->get()].expired()){ + return handles[dev->get()].lock(); + } + + //create a new cached handle + try{ + sptr new_handle(new libusb_device_handle_impl(dev)); + handles[dev->get()] = new_handle; + return new_handle; + } + catch(const uhd::exception &e){ + std::cerr << "USB open failed: see the application notes for your device." << std::endl; + throw; + } +} + +/*********************************************************************** + * libusb special handle + **********************************************************************/ +class libusb_special_handle_impl : public libusb::special_handle{ +public: + libusb_special_handle_impl(libusb::device::sptr dev){ + _dev = dev; + } + + libusb::device::sptr get_device(void) const{ + return _dev; + } + + std::string get_serial(void) const{ + return libusb::device_descriptor::make(this->get_device())->get_ascii_serial(); + } + + boost::uint16_t get_vendor_id(void) const{ + return libusb::device_descriptor::make(this->get_device())->get().idVendor; + } + + boost::uint16_t get_product_id(void) const{ + return libusb::device_descriptor::make(this->get_device())->get().idProduct; + } + +private: + libusb::device::sptr _dev; //always keep a reference to device +}; + +libusb::special_handle::sptr libusb::special_handle::make(device::sptr dev){ + return sptr(new libusb_special_handle_impl(dev)); +} + +/*********************************************************************** + * list device handles implementations + **********************************************************************/ +std::vector<usb_device_handle::sptr> usb_device_handle::get_device_list( + boost::uint16_t vid, boost::uint16_t pid +){ + std::vector<usb_device_handle::sptr> handles; + + libusb::device_list::sptr dev_list = libusb::device_list::make(); + for (size_t i = 0; i < dev_list->size(); i++){ + usb_device_handle::sptr handle = libusb::special_handle::make(dev_list->at(i)); + if (handle->get_vendor_id() == vid and handle->get_product_id() == pid){ + handles.push_back(handle); + } + } + + return handles; +} diff --git a/host/lib/transport/libusb1_base.hpp b/host/lib/transport/libusb1_base.hpp new file mode 100644 index 000000000..04c1d6574 --- /dev/null +++ b/host/lib/transport/libusb1_base.hpp @@ -0,0 +1,149 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_LIBUHD_TRANSPORT_LIBUSB_HPP +#define INCLUDED_LIBUHD_TRANSPORT_LIBUSB_HPP + +#include <uhd/config.hpp> +#include <boost/utility.hpp> +#include <boost/shared_ptr.hpp> +#include <uhd/transport/usb_device_handle.hpp> +#include <libusb.h> + +/*********************************************************************** + * Libusb object oriented smart pointer wrappers: + * The following wrappers provide allocation and automatic deallocation + * for various libusb data types and handles. The construction routines + * also store tables of already allocated structures to avoid multiple + * occurrences of opened handles (for example). + **********************************************************************/ +namespace uhd { namespace transport { + +namespace libusb { + + /*! + * This session class holds a global libusb context for this process. + * The get global session call will create a new context if none exists. + * When all references to session are destroyed, the context will be freed. + */ + class session : boost::noncopyable { + public: + typedef boost::shared_ptr<session> sptr; + + /*! + * Level 0: no messages ever printed by the library (default) + * Level 1: error messages are printed to stderr + * Level 2: warning and error messages are printed to stderr + * Level 3: informational messages are printed to stdout, warning + * and error messages are printed to stderr + */ + static const int debug_level = 0; + + //! get a shared pointer to the global session + static sptr get_global_session(void); + + //! get the underlying libusb context pointer + virtual libusb_context *get_context(void) const = 0; + }; + + /*! + * Holds a device pointer with a reference to the session. + */ + class device : boost::noncopyable { + public: + typedef boost::shared_ptr<device> sptr; + + //! get the underlying device pointer + virtual libusb_device *get(void) const = 0; + }; + + /*! + * This device list class holds a device list that will be + * automatically freed when the last reference is destroyed. + */ + class device_list : boost::noncopyable { + public: + typedef boost::shared_ptr<device_list> sptr; + + //! make a new device list + static sptr make(void); + + //! the number of devices in this list + virtual size_t size() const = 0; + + //! get the device pointer at a particular index + virtual device::sptr at(size_t index) const = 0; + }; + + /*! + * Holds a device descriptor and a reference to the device. + */ + class device_descriptor : boost::noncopyable { + public: + typedef boost::shared_ptr<device_descriptor> sptr; + + //! make a new descriptor from a device reference + static sptr make(device::sptr); + + //! get the underlying device descriptor + virtual const libusb_device_descriptor &get(void) const = 0; + + virtual std::string get_ascii_serial(void) const = 0; + }; + + /*! + * Holds a device handle and a reference to the device. + */ + class device_handle : boost::noncopyable { + public: + typedef boost::shared_ptr<device_handle> sptr; + + //! get a cached handle or make a new one given the device + static sptr get_cached_handle(device::sptr); + + //! get the underlying device handle + virtual libusb_device_handle *get(void) const = 0; + + /*! + * Open USB interfaces for control using magic value + * IN interface: 2 + * OUT interface: 1 + * Control interface: 0 + */ + virtual void claim_interface(int) = 0; + }; + + /*! + * The special handle is our internal implementation of the + * usb device handle which is used publicly to identify a device. + */ + class special_handle : public usb_device_handle { + public: + typedef boost::shared_ptr<special_handle> sptr; + + //! make a new special handle from device + static sptr make(device::sptr); + + //! get the underlying device reference + virtual device::sptr get_device(void) const = 0; + }; + +} + +}} //namespace + +#endif /* INCLUDED_LIBUHD_TRANSPORT_LIBUSB_HPP */ diff --git a/host/lib/transport/libusb1_control.cpp b/host/lib/transport/libusb1_control.cpp new file mode 100644 index 000000000..f903907d0 --- /dev/null +++ b/host/lib/transport/libusb1_control.cpp @@ -0,0 +1,64 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "libusb1_base.hpp" +#include <uhd/transport/usb_control.hpp> + +using namespace uhd::transport; + +const int libusb_timeout = 0; + +/*********************************************************************** + * libusb-1.0 implementation of USB control transport + **********************************************************************/ +class libusb_control_impl : public usb_control { +public: + libusb_control_impl(libusb::device_handle::sptr handle): + _handle(handle) + { + _handle->claim_interface(0 /* control interface */); + } + + ssize_t submit(boost::uint8_t request_type, + boost::uint8_t request, + boost::uint16_t value, + boost::uint16_t index, + unsigned char *buff, + boost::uint16_t length + ){ + return libusb_control_transfer(_handle->get(), + request_type, + request, + value, + index, + buff, + length, + libusb_timeout); + } + +private: + libusb::device_handle::sptr _handle; +}; + +/*********************************************************************** + * USB control public make functions + **********************************************************************/ +usb_control::sptr usb_control::make(usb_device_handle::sptr handle){ + return sptr(new libusb_control_impl(libusb::device_handle::get_cached_handle( + boost::static_pointer_cast<libusb::special_handle>(handle)->get_device() + ))); +} diff --git a/host/lib/transport/libusb1_zero_copy.cpp b/host/lib/transport/libusb1_zero_copy.cpp new file mode 100644 index 000000000..6dee69711 --- /dev/null +++ b/host/lib/transport/libusb1_zero_copy.cpp @@ -0,0 +1,289 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "libusb1_base.hpp" +#include <uhd/transport/usb_zero_copy.hpp> +#include <uhd/transport/bounded_buffer.hpp> +#include <uhd/transport/buffer_pool.hpp> +#include <uhd/utils/thread_priority.hpp> +#include <uhd/exception.hpp> +#include <boost/function.hpp> +#include <boost/foreach.hpp> +#include <boost/thread/thread.hpp> +#include <list> +#include <iostream> + +using namespace uhd; +using namespace uhd::transport; + +static const size_t DEFAULT_NUM_XFERS = 16; //num xfers +static const size_t DEFAULT_XFER_SIZE = 32*512; //bytes + +//! helper function: handles all async callbacks +static void libusb_async_cb(libusb_transfer *lut){ + (*static_cast<boost::function<void()> *>(lut->user_data))(); +} + +/*********************************************************************** + * Reusable managed receiver buffer: + * - Associated with a particular libusb transfer struct. + * - Submits the transfer to libusb in the release method. + **********************************************************************/ +class libusb_zero_copy_mrb : public managed_recv_buffer{ +public: + libusb_zero_copy_mrb(libusb_transfer *lut): + _lut(lut), _expired(true) { /* NOP */ } + + void release(void){ + if (_expired) return; + UHD_ASSERT_THROW(libusb_submit_transfer(_lut) == 0); + _expired = true; + } + + sptr get_new(void){ + _expired = false; + return sptr(this, &libusb_zero_copy_mrb::fake_deleter); + } + +private: + static void fake_deleter(void *obj){ + static_cast<libusb_zero_copy_mrb *>(obj)->release(); + } + + const void *get_buff(void) const{return _lut->buffer;} + size_t get_size(void) const{return _lut->actual_length;} + + libusb_transfer *_lut; + bool _expired; +}; + +/*********************************************************************** + * Reusable managed send buffer: + * - Associated with a particular libusb transfer struct. + * - Submits the transfer to libusb in the commit method. + **********************************************************************/ +class libusb_zero_copy_msb : public managed_send_buffer{ +public: + libusb_zero_copy_msb(libusb_transfer *lut): + _lut(lut), _expired(true) { /* NOP */ } + + void commit(size_t len){ + if (_expired) return; + _lut->length = len; + if(len == 0) libusb_async_cb(_lut); + else UHD_ASSERT_THROW(libusb_submit_transfer(_lut) == 0); + _expired = true; + } + + sptr get_new(void){ + _expired = false; + return sptr(this, &libusb_zero_copy_msb::fake_deleter); + } + +private: + static void fake_deleter(void *obj){ + static_cast<libusb_zero_copy_msb *>(obj)->commit(0); + } + + void *get_buff(void) const{return _lut->buffer;} + size_t get_size(void) const{return _lut->length;} + + libusb_transfer *_lut; + bool _expired; +}; + +/*********************************************************************** + * USB zero_copy device class + **********************************************************************/ +class libusb_zero_copy_impl : public usb_zero_copy{ +public: + + libusb_zero_copy_impl( + libusb::device_handle::sptr handle, + size_t recv_endpoint, + size_t send_endpoint, + const device_addr_t &hints + ): + _handle(handle), + _recv_frame_size(size_t(hints.cast<double>("recv_frame_size", DEFAULT_XFER_SIZE))), + _num_recv_frames(size_t(hints.cast<double>("num_recv_frames", DEFAULT_NUM_XFERS))), + _send_frame_size(size_t(hints.cast<double>("send_frame_size", DEFAULT_XFER_SIZE))), + _num_send_frames(size_t(hints.cast<double>("num_send_frames", DEFAULT_NUM_XFERS))), + _recv_buffer_pool(buffer_pool::make(_num_recv_frames, _recv_frame_size)), + _send_buffer_pool(buffer_pool::make(_num_send_frames, _send_frame_size)), + _pending_recv_buffs(_num_recv_frames), + _pending_send_buffs(_num_send_frames) + { + _handle->claim_interface(2 /*in interface*/); + _handle->claim_interface(1 /*out interface*/); + + //allocate libusb transfer structs and managed receive buffers + for (size_t i = 0; i < get_num_recv_frames(); i++){ + + libusb_transfer *lut = libusb_alloc_transfer(0); + UHD_ASSERT_THROW(lut != NULL); + + _mrb_pool.push_back(libusb_zero_copy_mrb(lut)); + _callbacks.push_back(boost::bind( + &libusb_zero_copy_impl::handle_recv, this, &_mrb_pool.back() + )); + + libusb_fill_bulk_transfer( + lut, // transfer + _handle->get(), // dev_handle + (recv_endpoint & 0x7f) | 0x80, // endpoint + static_cast<unsigned char *>(_recv_buffer_pool->at(i)), // buffer + this->get_recv_frame_size(), // length + libusb_transfer_cb_fn(&libusb_async_cb), // callback + static_cast<void *>(&_callbacks.back()), // user_data + 0 // timeout + ); + + _all_luts.push_back(lut); + _mrb_pool.back().get_new(); + } + + //allocate libusb transfer structs and managed send buffers + for (size_t i = 0; i < get_num_send_frames(); i++){ + + libusb_transfer *lut = libusb_alloc_transfer(0); + UHD_ASSERT_THROW(lut != NULL); + + _msb_pool.push_back(libusb_zero_copy_msb(lut)); + _callbacks.push_back(boost::bind( + &libusb_zero_copy_impl::handle_send, this, &_msb_pool.back() + )); + + libusb_fill_bulk_transfer( + lut, // transfer + _handle->get(), // dev_handle + (send_endpoint & 0x7f) | 0x00, // endpoint + static_cast<unsigned char *>(_send_buffer_pool->at(i)), // buffer + this->get_send_frame_size(), // length + libusb_transfer_cb_fn(&libusb_async_cb), // callback + static_cast<void *>(&_callbacks.back()), // user_data + 0 // timeout + ); + + _all_luts.push_back(lut); + libusb_async_cb(lut); + } + + //spawn the event handler threads + size_t concurrency = hints.cast<size_t>("concurrency_hint", 1); + for (size_t i = 0; i < concurrency; i++) _thread_group.create_thread( + boost::bind(&libusb_zero_copy_impl::run_event_loop, this) + ); + } + + ~libusb_zero_copy_impl(void){ + //shutdown the threads + _threads_running = false; + _thread_group.interrupt_all(); + _thread_group.join_all(); + + //cancel and free all transfers + BOOST_FOREACH(libusb_transfer *lut, _all_luts){ + libusb_cancel_transfer(lut); + libusb_free_transfer(lut); + } + } + + managed_recv_buffer::sptr get_recv_buff(double timeout){ + libusb_zero_copy_mrb *mrb = NULL; + if (_pending_recv_buffs.pop_with_timed_wait(mrb, timeout)){ + return mrb->get_new(); + } + return managed_recv_buffer::sptr(); + } + + managed_send_buffer::sptr get_send_buff(double timeout){ + libusb_zero_copy_msb *msb = NULL; + if (_pending_send_buffs.pop_with_timed_wait(msb, timeout)){ + return msb->get_new(); + } + return managed_send_buffer::sptr(); + } + + size_t get_num_recv_frames(void) const { return _num_recv_frames; } + size_t get_num_send_frames(void) const { return _num_send_frames; } + + size_t get_recv_frame_size(void) const { return _recv_frame_size; } + size_t get_send_frame_size(void) const { return _send_frame_size; } + +private: + //! Handle a bound async callback for recv + void handle_recv(libusb_zero_copy_mrb *mrb){ + _pending_recv_buffs.push_with_haste(mrb); + } + + //! Handle a bound async callback for send + void handle_send(libusb_zero_copy_msb *msb){ + _pending_send_buffs.push_with_haste(msb); + } + + libusb::device_handle::sptr _handle; + const size_t _recv_frame_size, _num_recv_frames; + const size_t _send_frame_size, _num_send_frames; + + //! Storage for transfer related objects + buffer_pool::sptr _recv_buffer_pool, _send_buffer_pool; + bounded_buffer<libusb_zero_copy_mrb *> _pending_recv_buffs; + bounded_buffer<libusb_zero_copy_msb *> _pending_send_buffs; + std::list<libusb_zero_copy_mrb> _mrb_pool; + std::list<libusb_zero_copy_msb> _msb_pool; + std::list<boost::function<void()> > _callbacks; + + //! a list of all transfer structs we allocated + std::list<libusb_transfer *> _all_luts; + + //! event handler threads + boost::thread_group _thread_group; + bool _threads_running; + + void run_event_loop(void){ + set_thread_priority_safe(); + libusb_context *context = libusb::session::get_global_session()->get_context(); + _threads_running = true; + try{ + while(_threads_running){ + timeval tv; + tv.tv_sec = 0; + tv.tv_usec = 100000; //100ms + libusb_handle_events_timeout(context, &tv); + } + } catch(const boost::thread_interrupted &){} + } + +}; + +/*********************************************************************** + * USB zero_copy make functions + **********************************************************************/ +usb_zero_copy::sptr usb_zero_copy::make( + usb_device_handle::sptr handle, + size_t recv_endpoint, + size_t send_endpoint, + const device_addr_t &hints +){ + libusb::device_handle::sptr dev_handle(libusb::device_handle::get_cached_handle( + boost::static_pointer_cast<libusb::special_handle>(handle)->get_device() + )); + return sptr(new libusb_zero_copy_impl( + dev_handle, recv_endpoint, send_endpoint, hints + )); +} diff --git a/host/lib/transport/udp_common.hpp b/host/lib/transport/udp_common.hpp new file mode 100644 index 000000000..47775d9c4 --- /dev/null +++ b/host/lib/transport/udp_common.hpp @@ -0,0 +1,53 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_LIBUHD_TRANSPORT_VRT_PACKET_HANDLER_HPP +#define INCLUDED_LIBUHD_TRANSPORT_VRT_PACKET_HANDLER_HPP + +#include <uhd/config.hpp> +#include <boost/asio.hpp> + +namespace uhd{ namespace transport{ + + typedef boost::shared_ptr<boost::asio::ip::udp::socket> socket_sptr; + + /*! + * Wait for the socket to become ready for a receive operation. + * \param sock_fd the open socket file descriptor + * \param timeout the timeout duration in seconds + * \return true when the socket is ready for receive + */ + UHD_INLINE bool wait_for_recv_ready(int sock_fd, double timeout){ + //setup timeval for timeout + timeval tv; + //If the tv_usec > 1 second on some platforms, select will + //error EINVAL: An invalid timeout interval was specified. + tv.tv_sec = int(timeout); + tv.tv_usec = int(timeout*1000000)%1000000; + + //setup rset for timeout + fd_set rset; + FD_ZERO(&rset); + FD_SET(sock_fd, &rset); + + //call select with timeout on receive socket + return ::select(sock_fd+1, &rset, NULL, NULL, &tv) > 0; + } + +}} //namespace uhd::transport + +#endif /* INCLUDED_LIBUHD_TRANSPORT_VRT_PACKET_HANDLER_HPP */ diff --git a/host/lib/transport/udp_simple.cpp b/host/lib/transport/udp_simple.cpp new file mode 100644 index 000000000..1ee036d52 --- /dev/null +++ b/host/lib/transport/udp_simple.cpp @@ -0,0 +1,83 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "udp_common.hpp" +#include <uhd/transport/udp_simple.hpp> +#include <boost/format.hpp> +#include <iostream> + +using namespace uhd::transport; +namespace asio = boost::asio; + +/*********************************************************************** + * UDP simple implementation: connected and broadcast + **********************************************************************/ +class udp_simple_impl : public udp_simple{ +public: + udp_simple_impl( + const std::string &addr, const std::string &port, bool bcast, bool connect + ):_connected(connect){ + //std::cout << boost::format("Creating udp transport for %s %s") % addr % port << std::endl; + + //resolve the address + asio::ip::udp::resolver resolver(_io_service); + asio::ip::udp::resolver::query query(asio::ip::udp::v4(), addr, port); + _receiver_endpoint = *resolver.resolve(query); + + //create and open the socket + _socket = socket_sptr(new asio::ip::udp::socket(_io_service)); + _socket->open(asio::ip::udp::v4()); + + //allow broadcasting + _socket->set_option(asio::socket_base::broadcast(bcast)); + + //connect the socket + if (connect) _socket->connect(_receiver_endpoint); + + } + + size_t send(const asio::const_buffer &buff){ + if (_connected) return _socket->send(asio::buffer(buff)); + return _socket->send_to(asio::buffer(buff), _receiver_endpoint); + } + + size_t recv(const asio::mutable_buffer &buff, double timeout){ + if (not wait_for_recv_ready(_socket->native(), timeout)) return 0; + return _socket->receive(asio::buffer(buff)); + } + +private: + bool _connected; + asio::io_service _io_service; + socket_sptr _socket; + asio::ip::udp::endpoint _receiver_endpoint; +}; + +/*********************************************************************** + * UDP public make functions + **********************************************************************/ +udp_simple::sptr udp_simple::make_connected( + const std::string &addr, const std::string &port +){ + return sptr(new udp_simple_impl(addr, port, false, true /* no bcast, connect */)); +} + +udp_simple::sptr udp_simple::make_broadcast( + const std::string &addr, const std::string &port +){ + return sptr(new udp_simple_impl(addr, port, true, false /* bcast, no connect */)); +} diff --git a/host/lib/transport/udp_zero_copy.cpp b/host/lib/transport/udp_zero_copy.cpp new file mode 100644 index 000000000..5810f441c --- /dev/null +++ b/host/lib/transport/udp_zero_copy.cpp @@ -0,0 +1,310 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "udp_common.hpp" +#include <uhd/transport/udp_zero_copy.hpp> +#include <uhd/transport/udp_simple.hpp> //mtu +#include <uhd/transport/bounded_buffer.hpp> +#include <uhd/transport/buffer_pool.hpp> +#include <uhd/utils/warning.hpp> +#include <boost/format.hpp> +#include <iostream> +#include <list> + +using namespace uhd; +using namespace uhd::transport; +namespace asio = boost::asio; + +//A reasonable number of frames for send/recv and async/sync +static const size_t DEFAULT_NUM_FRAMES = 32; + +/*********************************************************************** + * Reusable managed receiver buffer: + * - Initialize with memory and a release callback. + * - Call get new with a length in bytes to re-use. + **********************************************************************/ +class udp_zero_copy_asio_mrb : public managed_recv_buffer{ +public: + typedef boost::function<void(udp_zero_copy_asio_mrb *)> release_cb_type; + + udp_zero_copy_asio_mrb(void *mem, const release_cb_type &release_cb): + _mem(mem), _len(0), _release_cb(release_cb){/* NOP */} + + void release(void){ + if (_len == 0) return; + this->_release_cb(this); + _len = 0; + } + + sptr get_new(size_t len){ + _len = len; + return sptr(this, &udp_zero_copy_asio_mrb::fake_deleter); + } + + template <class T> T cast(void) const{return static_cast<T>(_mem);} + +private: + static void fake_deleter(void *obj){ + static_cast<udp_zero_copy_asio_mrb *>(obj)->release(); + } + + const void *get_buff(void) const{return _mem;} + size_t get_size(void) const{return _len;} + + void *_mem; + size_t _len; + release_cb_type _release_cb; +}; + +/*********************************************************************** + * Reusable managed send buffer: + * - Initialize with memory and a commit callback. + * - Call get new with a length in bytes to re-use. + **********************************************************************/ +class udp_zero_copy_asio_msb : public managed_send_buffer{ +public: + typedef boost::function<void(udp_zero_copy_asio_msb *, size_t)> commit_cb_type; + + udp_zero_copy_asio_msb(void *mem, const commit_cb_type &commit_cb): + _mem(mem), _len(0), _commit_cb(commit_cb){/* NOP */} + + void commit(size_t len){ + if (_len == 0) return; + this->_commit_cb(this, len); + _len = 0; + } + + sptr get_new(size_t len){ + _len = len; + return sptr(this, &udp_zero_copy_asio_msb::fake_deleter); + } + +private: + static void fake_deleter(void *obj){ + static_cast<udp_zero_copy_asio_msb *>(obj)->commit(0); + } + + void *get_buff(void) const{return _mem;} + size_t get_size(void) const{return _len;} + + void *_mem; + size_t _len; + commit_cb_type _commit_cb; +}; + +/*********************************************************************** + * Zero Copy UDP implementation with ASIO: + * This is the portable zero copy implementation for systems + * where a faster, platform specific solution is not available. + * However, it is not a true zero copy implementation as each + * send and recv requires a copy operation to/from userspace. + **********************************************************************/ +class udp_zero_copy_asio_impl : public udp_zero_copy{ +public: + typedef boost::shared_ptr<udp_zero_copy_asio_impl> sptr; + + udp_zero_copy_asio_impl( + const std::string &addr, + const std::string &port, + const device_addr_t &hints + ): + _recv_frame_size(size_t(hints.cast<double>("recv_frame_size", udp_simple::mtu))), + _num_recv_frames(size_t(hints.cast<double>("num_recv_frames", DEFAULT_NUM_FRAMES))), + _send_frame_size(size_t(hints.cast<double>("send_frame_size", udp_simple::mtu))), + _num_send_frames(size_t(hints.cast<double>("num_send_frames", DEFAULT_NUM_FRAMES))), + _recv_buffer_pool(buffer_pool::make(_num_recv_frames, _recv_frame_size)), + _send_buffer_pool(buffer_pool::make(_num_send_frames, _send_frame_size)), + _pending_recv_buffs(_num_recv_frames), + _pending_send_buffs(_num_send_frames) + { + //std::cout << boost::format("Creating udp transport for %s %s") % addr % port << std::endl; + + //resolve the address + asio::ip::udp::resolver resolver(_io_service); + asio::ip::udp::resolver::query query(asio::ip::udp::v4(), addr, port); + asio::ip::udp::endpoint receiver_endpoint = *resolver.resolve(query); + + //create, open, and connect the socket + _socket = socket_sptr(new asio::ip::udp::socket(_io_service)); + _socket->open(asio::ip::udp::v4()); + _socket->connect(receiver_endpoint); + _sock_fd = _socket->native(); + + //allocate re-usable managed receive buffers + for (size_t i = 0; i < get_num_recv_frames(); i++){ + _mrb_pool.push_back(udp_zero_copy_asio_mrb(_recv_buffer_pool->at(i), + boost::bind(&udp_zero_copy_asio_impl::release, this, _1)) + ); + handle_recv(&_mrb_pool.back()); + } + + //allocate re-usable managed send buffers + for (size_t i = 0; i < get_num_send_frames(); i++){ + _msb_pool.push_back(udp_zero_copy_asio_msb(_send_buffer_pool->at(i), + boost::bind(&udp_zero_copy_asio_impl::commit, this, _1, _2)) + ); + handle_send(&_msb_pool.back()); + } + } + + //get size for internal socket buffer + template <typename Opt> size_t get_buff_size(void) const{ + Opt option; + _socket->get_option(option); + return option.value(); + } + + //set size for internal socket buffer + template <typename Opt> size_t resize_buff(size_t num_bytes){ + Opt option(num_bytes); + _socket->set_option(option); + return get_buff_size<Opt>(); + } + + /******************************************************************* + * Receive implementation: + * + * Perform a non-blocking receive for performance, + * and then fall back to a blocking receive with timeout. + * Return the managed receive buffer with the new length. + * When the caller is finished with the managed buffer, + * the managed receive buffer is released back into the queue. + ******************************************************************/ + managed_recv_buffer::sptr get_recv_buff(double timeout){ + udp_zero_copy_asio_mrb *mrb = NULL; + if (_pending_recv_buffs.pop_with_timed_wait(mrb, timeout)){ + + #ifdef MSG_DONTWAIT //try a non-blocking recv() if supported + ssize_t ret = ::recv(_sock_fd, mrb->cast<char *>(), _recv_frame_size, MSG_DONTWAIT); + if (ret > 0) return mrb->get_new(ret); + #endif + + if (wait_for_recv_ready(_sock_fd, timeout)) return mrb->get_new( + ::recv(_sock_fd, mrb->cast<char *>(), _recv_frame_size, 0) + ); + + this->handle_recv(mrb); //timeout: return the managed buffer to the queue + } + return managed_recv_buffer::sptr(); + } + + UHD_INLINE void handle_recv(udp_zero_copy_asio_mrb *mrb){ + _pending_recv_buffs.push_with_haste(mrb); + } + + void release(udp_zero_copy_asio_mrb *mrb){ + handle_recv(mrb); + } + + size_t get_num_recv_frames(void) const {return _num_recv_frames;} + size_t get_recv_frame_size(void) const {return _recv_frame_size;} + + /******************************************************************* + * Send implementation: + * + * Get a managed receive buffer immediately with max length set. + * The caller will fill the buffer and commit it when finished. + * The commit routine will perform a blocking send operation, + * and push the managed send buffer back into the queue. + ******************************************************************/ + managed_send_buffer::sptr get_send_buff(double timeout){ + udp_zero_copy_asio_msb *msb = NULL; + if (_pending_send_buffs.pop_with_timed_wait(msb, timeout)){ + return msb->get_new(_send_frame_size); + } + return managed_send_buffer::sptr(); + } + + UHD_INLINE void handle_send(udp_zero_copy_asio_msb *msb){ + _pending_send_buffs.push_with_haste(msb); + } + + void commit(udp_zero_copy_asio_msb *msb, size_t len){ + ::send(_sock_fd, msb->cast<const char *>(), len, 0); + handle_send(msb); + } + + size_t get_num_send_frames(void) const {return _num_send_frames;} + size_t get_send_frame_size(void) const {return _send_frame_size;} + +private: + //memory management -> buffers and fifos + const size_t _recv_frame_size, _num_recv_frames; + const size_t _send_frame_size, _num_send_frames; + buffer_pool::sptr _recv_buffer_pool, _send_buffer_pool; + bounded_buffer<udp_zero_copy_asio_mrb *> _pending_recv_buffs; + bounded_buffer<udp_zero_copy_asio_msb *> _pending_send_buffs; + std::list<udp_zero_copy_asio_msb> _msb_pool; + std::list<udp_zero_copy_asio_mrb> _mrb_pool; + + //asio guts -> socket and service + asio::io_service _io_service; + socket_sptr _socket; + int _sock_fd; +}; + +/*********************************************************************** + * UDP zero copy make function + **********************************************************************/ +template<typename Opt> static void resize_buff_helper( + udp_zero_copy_asio_impl::sptr udp_trans, + const size_t target_size, + const std::string &name +){ + std::string help_message; + #if defined(UHD_PLATFORM_LINUX) + help_message = str(boost::format( + "Please run: sudo sysctl -w net.core.%smem_max=%d\n" + ) % ((name == "recv")?"r":"w") % target_size); + #endif /*defined(UHD_PLATFORM_LINUX)*/ + + //resize the buffer if size was provided + if (target_size > 0){ + size_t actual_size = udp_trans->resize_buff<Opt>(target_size); + if (target_size != actual_size) std::cout << boost::format( + "Target %s sock buff size: %d bytes\n" + "Actual %s sock buff size: %d bytes" + ) % name % target_size % name % actual_size << std::endl; + else std::cout << boost::format( + "Current %s sock buff size: %d bytes" + ) % name % actual_size << std::endl; + if (actual_size < target_size) uhd::warning::post(str(boost::format( + "The %s buffer could not be resized sufficiently.\n" + "See the transport application notes on buffer resizing.\n%s" + ) % name % help_message)); + } +} + +udp_zero_copy::sptr udp_zero_copy::make( + const std::string &addr, + const std::string &port, + const device_addr_t &hints +){ + udp_zero_copy_asio_impl::sptr udp_trans( + new udp_zero_copy_asio_impl(addr, port, hints) + ); + + //extract buffer size hints from the device addr + size_t recv_buff_size = size_t(hints.cast<double>("recv_buff_size", 0.0)); + size_t send_buff_size = size_t(hints.cast<double>("send_buff_size", 0.0)); + + //call the helper to resize send and recv buffers + resize_buff_helper<asio::socket_base::receive_buffer_size>(udp_trans, recv_buff_size, "recv"); + resize_buff_helper<asio::socket_base::send_buffer_size> (udp_trans, send_buff_size, "send"); + + return udp_trans; +} diff --git a/host/lib/transport/usb_dummy_impl.cpp b/host/lib/transport/usb_dummy_impl.cpp new file mode 100644 index 000000000..930678405 --- /dev/null +++ b/host/lib/transport/usb_dummy_impl.cpp @@ -0,0 +1,39 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/transport/usb_device_handle.hpp> +#include <uhd/transport/usb_control.hpp> +#include <uhd/transport/usb_zero_copy.hpp> +#include <uhd/exception.hpp> + +using namespace uhd; +using namespace uhd::transport; + +std::vector<usb_device_handle::sptr> usb_device_handle::get_device_list(boost::uint16_t, boost::uint16_t){ + return std::vector<usb_device_handle::sptr>(); //empty list +} + +usb_control::sptr usb_control::make(usb_device_handle::sptr){ + throw uhd::not_implemented_error("no usb support -> usb_control::make not implemented"); +} + +usb_zero_copy::sptr usb_zero_copy::make( + usb_device_handle::sptr, + size_t, size_t, const device_addr_t & +){ + throw uhd::not_implemented_error("no usb support -> usb_zero_copy::make not implemented"); +} diff --git a/host/lib/transport/vrt_packet_handler.hpp b/host/lib/transport/vrt_packet_handler.hpp new file mode 100644 index 000000000..d74b2c13c --- /dev/null +++ b/host/lib/transport/vrt_packet_handler.hpp @@ -0,0 +1,470 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_LIBUHD_TRANSPORT_VRT_PACKET_HANDLER_HPP +#define INCLUDED_LIBUHD_TRANSPORT_VRT_PACKET_HANDLER_HPP + +#include <uhd/config.hpp> +#include <uhd/device.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/byteswap.hpp> +#include <uhd/types/io_type.hpp> +#include <uhd/types/otw_type.hpp> +#include <uhd/types/metadata.hpp> +#include <uhd/transport/vrt_if_packet.hpp> +#include <uhd/convert.hpp> +#include <uhd/transport/zero_copy.hpp> +#include <boost/function.hpp> +#include <stdexcept> +#include <iostream> +#include <vector> + +namespace vrt_packet_handler{ + +//this may change in the future but its a constant for now +static const size_t OTW_BYTES_PER_SAMP = sizeof(boost::uint32_t); + +template <typename T> UHD_INLINE T get_context_code( + const boost::uint32_t *vrt_hdr, + const uhd::transport::vrt::if_packet_info_t &if_packet_info +){ + //extract the context word (we dont know the endianness so mirror the bytes) + boost::uint32_t word0 = vrt_hdr[if_packet_info.num_header_words32] | + uhd::byteswap(vrt_hdr[if_packet_info.num_header_words32]); + return T(word0 & 0xff); +} + +/*********************************************************************** + * vrt packet handler for recv + **********************************************************************/ + typedef std::vector<uhd::transport::managed_recv_buffer::sptr> managed_recv_buffs_t; + typedef boost::function<bool(managed_recv_buffs_t &)> get_recv_buffs_t; + typedef boost::function<void(size_t /*which channel*/)> handle_overflow_t; + typedef boost::function<void(const boost::uint32_t *, uhd::transport::vrt::if_packet_info_t &)> vrt_unpacker_t; + + static inline void handle_overflow_nop(size_t){} + + struct recv_state{ + //width of the receiver in channels + size_t width; + + //state variables to handle fragments + managed_recv_buffs_t managed_buffs; + std::vector<const boost::uint8_t *> copy_buffs; + size_t size_of_copy_buffs; + size_t fragment_offset_in_samps; + std::vector<void *> io_buffs; + std::vector<const void *> otw_buffs; + + recv_state(size_t width = 1): + width(width), + managed_buffs(width), + copy_buffs(width, NULL), + size_of_copy_buffs(0), + fragment_offset_in_samps(0), + io_buffs(0) //resized later + { + /* NOP */ + } + }; + + /******************************************************************* + * Unpack a received vrt header and set the copy buffer. + * - helper function for vrt_packet_handler::_recv1 + ******************************************************************/ + static UHD_INLINE void _recv1_helper( + recv_state &state, + uhd::rx_metadata_t &metadata, + double tick_rate, + const vrt_unpacker_t &vrt_unpacker, + const handle_overflow_t &handle_overflow, + size_t vrt_header_offset_words32 + ){ + //vrt unpack each managed buffer + uhd::transport::vrt::if_packet_info_t if_packet_info; + for (size_t i = 0; i < state.width; i++){ + if (state.managed_buffs[i].get() == NULL) continue; //better have a message packet coming up... + + //extract packet words and check thats its enough to move on + size_t num_packet_words32 = state.managed_buffs[i]->size()/sizeof(boost::uint32_t); + if (num_packet_words32 <= vrt_header_offset_words32){ + throw std::runtime_error("recv buffer smaller than vrt packet offset"); + } + + //unpack the vrt header into the info struct + const boost::uint32_t *vrt_hdr = state.managed_buffs[i]->cast<const boost::uint32_t *>() + vrt_header_offset_words32; + if_packet_info.num_packet_words32 = num_packet_words32 - vrt_header_offset_words32; + vrt_unpacker(vrt_hdr, if_packet_info); + + //handle the non-data packet case and parse its contents + if (if_packet_info.packet_type != uhd::transport::vrt::if_packet_info_t::PACKET_TYPE_DATA){ + + metadata.error_code = get_context_code<uhd::rx_metadata_t::error_code_t>(vrt_hdr, if_packet_info); + if (metadata.error_code == uhd::rx_metadata_t::ERROR_CODE_OVERFLOW) handle_overflow(i); + + //break to exit loop and store metadata below + state.size_of_copy_buffs = 0; break; + } + + //setup the buffer to point to the data + state.copy_buffs[i] = reinterpret_cast<const boost::uint8_t *>(vrt_hdr + if_packet_info.num_header_words32); + + //store the minimum payload length into the copy buffer length + size_t num_payload_bytes = if_packet_info.num_payload_words32*sizeof(boost::uint32_t); + if (i == 0 or state.size_of_copy_buffs > num_payload_bytes){ + state.size_of_copy_buffs = num_payload_bytes; + } + } + + //store the last vrt info into the metadata + metadata.has_time_spec = if_packet_info.has_tsi and if_packet_info.has_tsf; + metadata.time_spec = uhd::time_spec_t( + time_t(if_packet_info.tsi), size_t(if_packet_info.tsf), tick_rate + ); + static const int tlr_sob_flags = (1 << 21) | (1 << 9); //enable and indicator bits + metadata.start_of_burst = if_packet_info.has_tlr and (int(if_packet_info.tlr & tlr_sob_flags) == tlr_sob_flags); + static const int tlr_eob_flags = (1 << 20) | (1 << 8); //enable and indicator bits + metadata.end_of_burst = if_packet_info.has_tlr and (int(if_packet_info.tlr & tlr_eob_flags) == tlr_eob_flags); + } + + /******************************************************************* + * Recv data, unpack a vrt header, and copy-convert the data. + * - helper function for vrt_packet_handler::recv + ******************************************************************/ + static UHD_INLINE size_t _recv1( + recv_state &state, + const uhd::device::recv_buffs_type &buffs, + size_t offset_bytes, + size_t total_samps, + uhd::rx_metadata_t &metadata, + uhd::convert::function_type &converter, + double tick_rate, + const vrt_unpacker_t &vrt_unpacker, + const get_recv_buffs_t &get_recv_buffs, + const handle_overflow_t &handle_overflow, + size_t vrt_header_offset_words32, + size_t chans_per_otw_buff + ){ + metadata.error_code = uhd::rx_metadata_t::ERROR_CODE_NONE; + + //perform a receive if no rx data is waiting to be copied + if (state.size_of_copy_buffs == 0){ + state.fragment_offset_in_samps = 0; + if (not get_recv_buffs(state.managed_buffs)){ + metadata.error_code = uhd::rx_metadata_t::ERROR_CODE_TIMEOUT; + return 0; + } + try{ + _recv1_helper( + state, metadata, tick_rate, + vrt_unpacker, handle_overflow, + vrt_header_offset_words32 + ); + }catch(const std::exception &e){ + state.size_of_copy_buffs = 0; //reset copy buffs size + std::cerr << "Error (recv): " << e.what() << std::endl; + metadata.error_code = uhd::rx_metadata_t::ERROR_CODE_BAD_PACKET; + return 0; + } + } + //defaults for the metadata when this is a fragment + else{ + metadata.has_time_spec = false; + metadata.start_of_burst = false; + metadata.end_of_burst = false; + } + + //extract the number of samples available to copy + size_t bytes_per_item = OTW_BYTES_PER_SAMP; + size_t nsamps_available = state.size_of_copy_buffs/bytes_per_item; + size_t nsamps_to_copy = std::min(total_samps*chans_per_otw_buff, nsamps_available); + size_t bytes_to_copy = nsamps_to_copy*bytes_per_item; + size_t nsamps_to_copy_per_io_buff = nsamps_to_copy/chans_per_otw_buff; + + for (size_t i = 0; i < buffs.size(); i+=chans_per_otw_buff){ + + //fill a vector with pointers to the io buffers + for (size_t j = 0; j < chans_per_otw_buff; j++){ + state.io_buffs[j] = reinterpret_cast<boost::uint8_t *>(buffs[i+j]) + offset_bytes; + } + + //copy-convert the samples from the recv buffer + converter(state.copy_buffs[i], state.io_buffs, nsamps_to_copy_per_io_buff); + + //update the rx copy buffer to reflect the bytes copied + state.copy_buffs[i] += bytes_to_copy; + } + //update the copy buffer's availability + state.size_of_copy_buffs -= bytes_to_copy; + + //setup the fragment flags and offset + metadata.more_fragments = state.size_of_copy_buffs != 0; + metadata.fragment_offset = state.fragment_offset_in_samps; + state.fragment_offset_in_samps += nsamps_to_copy; //set for next call + + return nsamps_to_copy_per_io_buff; + } + + /******************************************************************* + * Recv vrt packets and copy convert the samples into the buffer. + ******************************************************************/ + static UHD_INLINE size_t recv( + recv_state &state, + const uhd::device::recv_buffs_type &buffs, + const size_t total_num_samps, + uhd::rx_metadata_t &metadata, + uhd::device::recv_mode_t recv_mode, + const uhd::io_type_t &io_type, + const uhd::otw_type_t &otw_type, + double tick_rate, + const vrt_unpacker_t &vrt_unpacker, + const get_recv_buffs_t &get_recv_buffs, + const handle_overflow_t &handle_overflow = &handle_overflow_nop, + size_t vrt_header_offset_words32 = 0, + size_t chans_per_otw_buff = 1 + ){ + state.io_buffs.resize(chans_per_otw_buff); + + uhd::convert::function_type converter( + uhd::convert::get_converter_otw_to_cpu( + io_type, otw_type, 1, chans_per_otw_buff + )); + + switch(recv_mode){ + + //////////////////////////////////////////////////////////////// + case uhd::device::RECV_MODE_ONE_PACKET:{ + //////////////////////////////////////////////////////////////// + return _recv1( + state, + buffs, 0, + total_num_samps, + metadata, + converter, + tick_rate, + vrt_unpacker, + get_recv_buffs, + handle_overflow, + vrt_header_offset_words32, + chans_per_otw_buff + ); + } + + //////////////////////////////////////////////////////////////// + case uhd::device::RECV_MODE_FULL_BUFF:{ + //////////////////////////////////////////////////////////////// + size_t accum_num_samps = 0; + uhd::rx_metadata_t tmp_md; + while(accum_num_samps < total_num_samps){ + size_t num_samps = _recv1( + state, + buffs, accum_num_samps*io_type.size, + total_num_samps - accum_num_samps, + (accum_num_samps == 0)? metadata : tmp_md, //only the first metadata gets kept + converter, + tick_rate, + vrt_unpacker, + get_recv_buffs, + handle_overflow, + vrt_header_offset_words32, + chans_per_otw_buff + ); + if (num_samps == 0) break; //had a recv timeout or error, break loop + accum_num_samps += num_samps; + } + return accum_num_samps; + } + + default: throw std::runtime_error("unknown recv mode"); + }//switch(recv_mode) + } + +/*********************************************************************** + * vrt packet handler for send + **********************************************************************/ + typedef std::vector<uhd::transport::managed_send_buffer::sptr> managed_send_buffs_t; + typedef boost::function<bool(managed_send_buffs_t &)> get_send_buffs_t; + typedef boost::function<void(boost::uint32_t *, uhd::transport::vrt::if_packet_info_t &)> vrt_packer_t; + + static const boost::uint64_t zeros = 0; + + struct send_state{ + //init the expected seq number + size_t next_packet_seq; + managed_send_buffs_t managed_buffs; + std::vector<const void *> zero_buffs; + std::vector<const void *> io_buffs; + + send_state(size_t width = 1): + next_packet_seq(0), + managed_buffs(width), + zero_buffs(width, &zeros), + io_buffs(0) //resized later + { + /* NOP */ + } + }; + + /******************************************************************* + * Pack a vrt header, copy-convert the data, and send it. + * - helper function for vrt_packet_handler::send + ******************************************************************/ + static UHD_INLINE size_t _send1( + send_state &state, + const uhd::device::send_buffs_type &buffs, + const size_t offset_bytes, + const size_t num_samps, + uhd::transport::vrt::if_packet_info_t &if_packet_info, + uhd::convert::function_type &converter, + const vrt_packer_t &vrt_packer, + const get_send_buffs_t &get_send_buffs, + const size_t vrt_header_offset_words32, + const size_t chans_per_otw_buff + ){ + //load the rest of the if_packet_info in here + if_packet_info.num_payload_words32 = (num_samps*chans_per_otw_buff*OTW_BYTES_PER_SAMP)/sizeof(boost::uint32_t); + if_packet_info.packet_count = state.next_packet_seq; + + //get send buffers for each otw channel + if (not get_send_buffs(state.managed_buffs)) return 0; + + for (size_t i = 0; i < buffs.size(); i+=chans_per_otw_buff){ + //calculate pointers with offsets to io and otw memory + for (size_t j = 0; j < chans_per_otw_buff; j++){ + state.io_buffs[j] = reinterpret_cast<const boost::uint8_t *>(buffs[i+j]) + offset_bytes; + } + boost::uint32_t *otw_mem = state.managed_buffs[i]->cast<boost::uint32_t *>() + vrt_header_offset_words32; + + //pack metadata into a vrt header + vrt_packer(otw_mem, if_packet_info); + otw_mem += if_packet_info.num_header_words32; + + //copy-convert the samples into the send buffer + converter(state.io_buffs, otw_mem, num_samps); + + //commit the samples to the zero-copy interface + size_t num_bytes_total = (vrt_header_offset_words32+if_packet_info.num_packet_words32)*sizeof(boost::uint32_t); + state.managed_buffs[i]->commit(num_bytes_total); + } + state.next_packet_seq++; //increment sequence after commits + return num_samps; + } + + /******************************************************************* + * Send vrt packets and copy convert the samples into the buffer. + ******************************************************************/ + static UHD_INLINE size_t send( + send_state &state, + const uhd::device::send_buffs_type &buffs, + const size_t total_num_samps, + const uhd::tx_metadata_t &metadata, + uhd::device::send_mode_t send_mode, + const uhd::io_type_t &io_type, + const uhd::otw_type_t &otw_type, + double tick_rate, + const vrt_packer_t &vrt_packer, + const get_send_buffs_t &get_send_buffs, + size_t max_samples_per_packet, + size_t vrt_header_offset_words32 = 0, + size_t chans_per_otw_buff = 1 + ){ + state.io_buffs.resize(chans_per_otw_buff); + + uhd::convert::function_type converter( + uhd::convert::get_converter_cpu_to_otw( + io_type, otw_type, chans_per_otw_buff, 1 + )); + + //translate the metadata to vrt if packet info + uhd::transport::vrt::if_packet_info_t if_packet_info; + if_packet_info.has_sid = false; + if_packet_info.has_cid = false; + if_packet_info.has_tlr = false; + if_packet_info.tsi = boost::uint32_t(metadata.time_spec.get_full_secs()); + if_packet_info.tsf = boost::uint64_t(metadata.time_spec.get_tick_count(tick_rate)); + + if (total_num_samps <= max_samples_per_packet) send_mode = uhd::device::SEND_MODE_ONE_PACKET; + switch(send_mode){ + + //////////////////////////////////////////////////////////////// + case uhd::device::SEND_MODE_ONE_PACKET:{ + //////////////////////////////////////////////////////////////// + + //fill in parts of the packet info overwrote in full buff mode + if_packet_info.has_tsi = metadata.has_time_spec; + if_packet_info.has_tsf = metadata.has_time_spec; + if_packet_info.sob = metadata.start_of_burst; + if_packet_info.eob = metadata.end_of_burst; + + return _send1( + state, + //TODO remove this code when sample counts of zero are supported by hardware + (total_num_samps)?buffs : state.zero_buffs, 0, + std::max<size_t>(1, std::min(total_num_samps, max_samples_per_packet)), + if_packet_info, + converter, + vrt_packer, + get_send_buffs, + vrt_header_offset_words32, + chans_per_otw_buff + ); + } + + //////////////////////////////////////////////////////////////// + case uhd::device::SEND_MODE_FULL_BUFF:{ + //////////////////////////////////////////////////////////////// + size_t total_num_samps_sent = 0; + + //loop through the following fragment indexes + while(total_num_samps_sent < total_num_samps){ + + //calculate per-loop-iteration variables + const size_t total_num_samps_unsent = total_num_samps - total_num_samps_sent; + const bool first_fragment = (total_num_samps_sent == 0); + const bool final_fragment = (total_num_samps_unsent <= max_samples_per_packet); + + //calculate new flags for the fragments + if_packet_info.has_tsi = metadata.has_time_spec and first_fragment; + if_packet_info.has_tsf = if_packet_info.has_tsi; + if_packet_info.sob = metadata.start_of_burst and first_fragment; + if_packet_info.eob = metadata.end_of_burst and final_fragment; + + //send the fragment with the helper function + const size_t num_samps_sent = _send1( + state, + buffs, total_num_samps_sent*io_type.size, + std::min(total_num_samps_unsent, max_samples_per_packet), + if_packet_info, + converter, + vrt_packer, + get_send_buffs, + vrt_header_offset_words32, + chans_per_otw_buff + ); + total_num_samps_sent += num_samps_sent; + if (num_samps_sent == 0) return total_num_samps_sent; + } + return total_num_samps_sent; + } + + default: throw std::runtime_error("unknown send mode"); + }//switch(send_mode) + } + +} //namespace vrt_packet_handler + +#endif /* INCLUDED_LIBUHD_TRANSPORT_VRT_PACKET_HANDLER_HPP */ diff --git a/host/lib/types/CMakeLists.txt b/host/lib/types/CMakeLists.txt new file mode 100644 index 000000000..957dfd345 --- /dev/null +++ b/host/lib/types/CMakeLists.txt @@ -0,0 +1,92 @@ +# +# Copyright 2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Setup defines for high resolution timing +######################################################################## +MESSAGE(STATUS "") +MESSAGE(STATUS "Configuring high resolution timing...") +INCLUDE(CheckCXXSourceCompiles) + +SET(CMAKE_REQUIRED_LIBRARIES -lrt) +CHECK_CXX_SOURCE_COMPILES(" + #include <ctime> + int main(){ + timespec ts; + return clock_gettime(CLOCK_MONOTONIC, &ts); + } + " HAVE_CLOCK_GETTIME +) +UNSET(CMAKE_REQUIRED_LIBRARIES) + +INCLUDE(CheckCXXSourceCompiles) +CHECK_CXX_SOURCE_COMPILES(" + #include <mach/mach_time.h> + int main(){ + mach_timebase_info_data_t info; + mach_timebase_info(&info); + mach_absolute_time(); + return 0; + } + " HAVE_MACH_ABSOLUTE_TIME +) + +CHECK_CXX_SOURCE_COMPILES(" + #include <Windows.h> + int main(){ + LARGE_INTEGER value; + QueryPerformanceCounter(&value); + QueryPerformanceFrequency(&value); + return 0; + } + " HAVE_QUERY_PERFORMANCE_COUNTER +) + +IF(HAVE_CLOCK_GETTIME) + MESSAGE(STATUS " High resolution timing supported through clock_gettime.") + SET(TIME_SPEC_DEFS HAVE_CLOCK_GETTIME) + LIBUHD_APPEND_LIBS("-lrt") +ELSEIF(HAVE_MACH_ABSOLUTE_TIME) + MESSAGE(STATUS " High resolution timing supported through mach_absolute_time.") + SET(TIME_SPEC_DEFS HAVE_MACH_ABSOLUTE_TIME) +ELSEIF(HAVE_QUERY_PERFORMANCE_COUNTER) + MESSAGE(STATUS " High resolution timing supported through QueryPerformanceCounter.") + SET(TIME_SPEC_DEFS HAVE_QUERY_PERFORMANCE_COUNTER) +ELSE() + MESSAGE(STATUS " High resolution timing supported though microsec_clock.") + SET(TIME_SPEC_DEFS HAVE_MICROSEC_CLOCK) +ENDIF() + +SET_SOURCE_FILES_PROPERTIES( + ${CMAKE_CURRENT_SOURCE_DIR}/time_spec.cpp + PROPERTIES COMPILE_DEFINITIONS "${TIME_SPEC_DEFS}" +) + +######################################################################## +# This file included, use CMake directory variables +######################################################################## +LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/clock_config.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/device_addr.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/mac_addr.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/ranges.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/sensors.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/serial.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/time_spec.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/tune.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/types.cpp +) diff --git a/host/lib/types/clock_config.cpp b/host/lib/types/clock_config.cpp new file mode 100644 index 000000000..c150c5cc3 --- /dev/null +++ b/host/lib/types/clock_config.cpp @@ -0,0 +1,44 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/types/clock_config.hpp> + +using namespace uhd; + +clock_config_t clock_config_t::external(void){ + clock_config_t clock_config; + clock_config.ref_source = clock_config_t::REF_SMA; + clock_config.pps_source = clock_config_t::PPS_SMA; + clock_config.pps_polarity = clock_config_t::PPS_POS; + return clock_config; +} + +clock_config_t clock_config_t::internal(void){ + clock_config_t clock_config; + clock_config.ref_source = clock_config_t::REF_INT; + clock_config.pps_source = clock_config_t::PPS_SMA; + clock_config.pps_polarity = clock_config_t::PPS_POS; + return clock_config; +} + +clock_config_t::clock_config_t(void): + ref_source(REF_INT), + pps_source(PPS_SMA), + pps_polarity(PPS_POS) +{ + /* NOP */ +} diff --git a/host/lib/types/device_addr.cpp b/host/lib/types/device_addr.cpp new file mode 100644 index 000000000..193f76f8c --- /dev/null +++ b/host/lib/types/device_addr.cpp @@ -0,0 +1,122 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/types/device_addr.hpp> +#include <boost/algorithm/string.hpp> +#include <boost/tokenizer.hpp> +#include <boost/foreach.hpp> +#include <boost/format.hpp> +#include <boost/regex.hpp> +#include <stdexcept> +#include <sstream> + +using namespace uhd; + +static const std::string arg_delim = ","; +static const std::string pair_delim = "="; + +static std::string trim(const std::string &in){ + return boost::algorithm::trim_copy(in); +} + +#define tokenizer(inp, sep) \ + boost::tokenizer<boost::char_separator<char> > \ + (inp, boost::char_separator<char>(sep.c_str())) + +device_addr_t::device_addr_t(const std::string &args){ + BOOST_FOREACH(const std::string &pair, tokenizer(args, arg_delim)){ + if (trim(pair) == "") continue; + std::string key; + BOOST_FOREACH(const std::string &tok, tokenizer(pair, pair_delim)){ + if (key.empty()) key = tok; + else{ + this->set(trim(key), trim(tok)); + goto continue_next_arg; + } + } + throw uhd::value_error("invalid args string: "+args); + continue_next_arg: continue; + } +} + +std::string device_addr_t::to_pp_string(void) const{ + if (this->size() == 0) return "Empty Device Address"; + + std::stringstream ss; + ss << "Device Address:" << std::endl; + BOOST_FOREACH(std::string key, this->keys()){ + ss << boost::format(" %s: %s") % key % this->get(key) << std::endl; + } + return ss.str(); +} + +std::string device_addr_t::to_string(void) const{ + std::string args_str; + size_t count = 0; + BOOST_FOREACH(const std::string &key, this->keys()){ + args_str += ((count++)? arg_delim : "") + key + pair_delim + this->get(key); + } + return args_str; +} + +#include <uhd/utils/warning.hpp> + +device_addrs_t uhd::separate_device_addr(const device_addr_t &dev_addr){ + //------------ support old deprecated way and print warning -------- + if (dev_addr.has_key("addr") and not dev_addr["addr"].empty()){ + std::vector<std::string> addrs; boost::split(addrs, dev_addr["addr"], boost::is_any_of(" ")); + if (addrs.size() > 1){ + device_addr_t fixed_dev_addr = dev_addr; + fixed_dev_addr.pop("addr"); + for (size_t i = 0; i < addrs.size(); i++){ + fixed_dev_addr[str(boost::format("addr%d") % i)] = addrs[i]; + } + uhd::warning::post( + "addr = <space separated list of ip addresses> is deprecated.\n" + "To address a multi-device, use multiple <key><index> = <val>.\n" + "See the USRP-NXXX application notes. Two device example:\n" + " addr0 = 192.168.10.2\n" + " addr1 = 192.168.10.3\n" + ); + return separate_device_addr(fixed_dev_addr); + } + } + //------------------------------------------------------------------ + device_addrs_t dev_addrs; + BOOST_FOREACH(const std::string &key, dev_addr.keys()){ + boost::cmatch matches; + if (not boost::regex_match(key.c_str(), matches, boost::regex("^(\\D+)(\\d*)$"))){ + throw std::runtime_error("unknown key format: " + key); + } + std::string key_part(matches[1].first, matches[1].second); + std::string num_part(matches[2].first, matches[2].second); + size_t num = (num_part.empty())? 0 : boost::lexical_cast<size_t>(num_part); + dev_addrs.resize(std::max(num+1, dev_addrs.size())); + dev_addrs[num][key_part] = dev_addr[key]; + } + return dev_addrs; +} + +device_addr_t uhd::combine_device_addrs(const device_addrs_t &dev_addrs){ + device_addr_t dev_addr; + for (size_t i = 0; i < dev_addrs.size(); i++){ + BOOST_FOREACH(const std::string &key, dev_addrs[i].keys()){ + dev_addr[str(boost::format("%s%d") % key % i)] = dev_addrs[i][key]; + } + } + return dev_addr; +} diff --git a/host/lib/types/mac_addr.cpp b/host/lib/types/mac_addr.cpp new file mode 100644 index 000000000..a5cb90f97 --- /dev/null +++ b/host/lib/types/mac_addr.cpp @@ -0,0 +1,75 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/types/mac_addr.hpp> +#include <uhd/exception.hpp> +#include <boost/tokenizer.hpp> +#include <boost/foreach.hpp> +#include <boost/format.hpp> +#include <boost/cstdint.hpp> +#include <sstream> + +using namespace uhd; + +mac_addr_t::mac_addr_t(const byte_vector_t &bytes) : _bytes(bytes){ + UHD_ASSERT_THROW(_bytes.size() == 6); +} + +mac_addr_t mac_addr_t::from_bytes(const byte_vector_t &bytes){ + return mac_addr_t(bytes); +} + +mac_addr_t mac_addr_t::from_string(const std::string &mac_addr_str){ + + byte_vector_t bytes; + + try{ + if (mac_addr_str.size() != 17){ + throw uhd::value_error("expected exactly 17 characters"); + } + + //split the mac addr hex string at the colons + boost::tokenizer<boost::char_separator<char> > hex_num_toks( + mac_addr_str, boost::char_separator<char>(":")); + BOOST_FOREACH(const std::string &hex_str, hex_num_toks){ + int hex_num; + std::istringstream iss(hex_str); + iss >> std::hex >> hex_num; + bytes.push_back(boost::uint8_t(hex_num)); + } + + } + catch(std::exception const& e){ + throw uhd::value_error(str( + boost::format("Invalid mac address: %s\n\t%s") % mac_addr_str % e.what() + )); + } + + return mac_addr_t::from_bytes(bytes); +} + +byte_vector_t mac_addr_t::to_bytes(void) const{ + return _bytes; +} + +std::string mac_addr_t::to_string(void) const{ + std::string addr = ""; + BOOST_FOREACH(boost::uint8_t byte, this->to_bytes()){ + addr += str(boost::format("%s%02x") % ((addr == "")?"":":") % int(byte)); + } + return addr; +} diff --git a/host/lib/types/ranges.cpp b/host/lib/types/ranges.cpp new file mode 100644 index 000000000..6e39bc688 --- /dev/null +++ b/host/lib/types/ranges.cpp @@ -0,0 +1,163 @@ +// +// Copyright 2011-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/types/ranges.hpp> +#include <uhd/exception.hpp> +#include <boost/math/special_functions/round.hpp> +#include <boost/foreach.hpp> +#include <algorithm> +#include <sstream> + +using namespace uhd; + +/*********************************************************************** + * range_t implementation code + **********************************************************************/ +struct range_t::impl{ + impl(double start, double stop, double step): + start(start), stop(stop), step(step) + { + /* NOP */ + } + double start, stop, step; +}; + +range_t::range_t(double value): + _impl(UHD_PIMPL_MAKE(impl, (value, value, 0))) +{ + /* NOP */ +} + +range_t::range_t( + double start, double stop, double step +): + _impl(UHD_PIMPL_MAKE(impl, (start, stop, step))) +{ + if (stop < start){ + throw uhd::value_error("cannot make range where stop < start"); + } +} + +double range_t::start(void) const{ + return _impl->start; +} + +double range_t::stop(void) const{ + return _impl->stop; +} + +double range_t::step(void) const{ + return _impl->step; +} + +const std::string range_t::to_pp_string(void) const{ + std::stringstream ss; + ss << "(" << this->start(); + if (this->start() != this->stop()) ss << ", " << this->stop(); + if (this->step() != 0) ss << ", " << this->step(); + ss << ")"; + return ss.str(); +} + +/*********************************************************************** + * meta_range_t implementation code + **********************************************************************/ +void check_meta_range_monotonic(const meta_range_t &mr){ + if (mr.empty()){ + throw uhd::value_error("meta-range cannot be empty"); + } + for (size_t i = 1; i < mr.size(); i++){ + if (mr.at(i).start() < mr.at(i-1).stop()){ + throw uhd::value_error("meta-range is not monotonic"); + } + } +} + +meta_range_t::meta_range_t(void){ + /* NOP */ +} + +meta_range_t::meta_range_t( + double start, double stop, double step +): + std::vector<range_t > (1, range_t(start, stop, step)) +{ + /* NOP */ +} + +double meta_range_t::start(void) const{ + check_meta_range_monotonic(*this); + double min_start = this->front().start(); + BOOST_FOREACH(const range_t &r, (*this)){ + min_start = std::min(min_start, r.start()); + } + return min_start; +} + +double meta_range_t::stop(void) const{ + check_meta_range_monotonic(*this); + double max_stop = this->front().stop(); + BOOST_FOREACH(const range_t &r, (*this)){ + max_stop = std::max(max_stop, r.stop()); + } + return max_stop; +} + +double meta_range_t::step(void) const{ + check_meta_range_monotonic(*this); + std::vector<double> non_zero_steps; + range_t last = this->front(); + BOOST_FOREACH(const range_t &r, (*this)){ + //steps at each range + if (r.step() > 0) non_zero_steps.push_back(r.step()); + //and steps in-between ranges + double ibtw_step = r.start() - last.stop(); + if (ibtw_step > 0) non_zero_steps.push_back(ibtw_step); + //store ref to last + last = r; + } + if (non_zero_steps.empty()) return 0; //all zero steps, its zero... + return *std::min_element(non_zero_steps.begin(), non_zero_steps.end()); +} + +double meta_range_t::clip(double value, bool clip_step) const{ + check_meta_range_monotonic(*this); + double last_stop = this->front().stop(); + BOOST_FOREACH(const range_t &r, (*this)){ + //in-between ranges, clip to nearest + if (value < r.start()){ + return (std::abs(value - r.start()) < std::abs(value - last_stop))? + r.start() : last_stop; + } + //in this range, clip here + if (value <= r.stop()){ + if (not clip_step or r.step() == 0) return value; + return boost::math::round((value - r.start())/r.step())*r.step() + r.start(); + } + //continue on to the next range + last_stop = r.stop(); + } + return last_stop; +} + +const std::string meta_range_t::to_pp_string(void) const{ + std::stringstream ss; + BOOST_FOREACH(const range_t &r, (*this)){ + ss << r.to_pp_string() << std::endl; + } + return ss.str(); +} diff --git a/host/lib/types/sensors.cpp b/host/lib/types/sensors.cpp new file mode 100644 index 000000000..52a63d14c --- /dev/null +++ b/host/lib/types/sensors.cpp @@ -0,0 +1,94 @@ +// +// Copyright 2011-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/types/sensors.hpp> +#include <uhd/exception.hpp> +#include <boost/lexical_cast.hpp> +#include <boost/format.hpp> + +using namespace uhd; + +sensor_value_t::sensor_value_t( + const std::string &name, + bool value, + const std::string &utrue, + const std::string &ufalse +): + name(name), value(value?"true":"false"), + unit(value?utrue:ufalse), type(BOOLEAN) +{ + /* NOP */ +} + +sensor_value_t::sensor_value_t( + const std::string &name, + signed value, + const std::string &unit, + const std::string &formatter +): + name(name), value(str(boost::format(formatter) % value)), + unit(unit), type(INTEGER) +{ + /* NOP */ +} + +sensor_value_t::sensor_value_t( + const std::string &name, + double value, + const std::string &unit, + const std::string &formatter +): + name(name), value(str(boost::format(formatter) % value)), + unit(unit), type(REALNUM) +{ + /* NOP */ +} + +sensor_value_t::sensor_value_t( + const std::string &name, + const std::string &value, + const std::string &unit +): + name(name), value(value), + unit(unit), type(STRING) +{ + /* NOP */ +} + +std::string sensor_value_t::to_pp_string(void) const{ + switch(type){ + case BOOLEAN: + return str(boost::format("%s: %s") % name % unit); + case INTEGER: + case REALNUM: + case STRING: + return str(boost::format("%s: %s %s") % name % value % unit); + } + UHD_THROW_INVALID_CODE_PATH(); +} + +bool sensor_value_t::to_bool(void) const{ + return value == "true"; +} + +signed sensor_value_t::to_int(void) const{ + return boost::lexical_cast<signed>(value); +} + +double sensor_value_t::to_real(void) const{ + return boost::lexical_cast<double>(value); +} diff --git a/host/lib/types/serial.cpp b/host/lib/types/serial.cpp new file mode 100644 index 000000000..aa1133e72 --- /dev/null +++ b/host/lib/types/serial.cpp @@ -0,0 +1,78 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/types/serial.hpp> +#include <boost/thread.hpp> //for sleeping +#include <boost/assign/list_of.hpp> + +using namespace uhd; + +spi_config_t::spi_config_t(edge_t edge): + mosi_edge(edge), + miso_edge(edge) +{ + /* NOP */ +} + +void i2c_iface::write_eeprom( + boost::uint8_t addr, + boost::uint8_t offset, + const byte_vector_t &bytes +){ + for (size_t i = 0; i < bytes.size(); i++){ + //write a byte at a time, its easy that way + byte_vector_t cmd = boost::assign::list_of(offset+i)(bytes[i]); + this->write_i2c(addr, cmd); + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); //worst case write + } +} + +byte_vector_t i2c_iface::read_eeprom( + boost::uint8_t addr, + boost::uint8_t offset, + size_t num_bytes +){ + byte_vector_t bytes; + for (size_t i = 0; i < num_bytes; i++){ + //do a zero byte write to start read cycle + this->write_i2c(addr, byte_vector_t(1, offset+i)); + bytes.push_back(this->read_i2c(addr, 1).at(0)); + } + return bytes; +} + +boost::uint32_t spi_iface::read_spi( + int which_slave, + const spi_config_t &config, + boost::uint16_t data, + size_t num_bits +){ + return transact_spi( + which_slave, config, data, num_bits, true + ); +} + +void spi_iface::write_spi( + int which_slave, + const spi_config_t &config, + boost::uint16_t data, + size_t num_bits +){ + transact_spi( + which_slave, config, data, num_bits, false + ); +} diff --git a/host/lib/types/time_spec.cpp b/host/lib/types/time_spec.cpp new file mode 100644 index 000000000..a785332c2 --- /dev/null +++ b/host/lib/types/time_spec.cpp @@ -0,0 +1,154 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/types/time_spec.hpp> +#include <boost/math/special_functions/round.hpp> + +using namespace uhd; + +/*********************************************************************** + * Time spec system time + **********************************************************************/ + +/*! + * Creates a time spec from system counts: + * TODO make part of API as a static factory function + * The counts type is 64 bits and will overflow the ticks type of long. + * Therefore, divmod the counts into seconds + sub-second counts first. + */ +#include <inttypes.h> //imaxdiv, intmax_t +static UHD_INLINE time_spec_t time_spec_t_from_counts(intmax_t counts, intmax_t freq){ + imaxdiv_t divres = imaxdiv(counts, freq); + return time_spec_t(time_t(divres.quot), double(divres.rem)/freq); +} + +#ifdef HAVE_CLOCK_GETTIME +#include <time.h> +time_spec_t time_spec_t::get_system_time(void){ + timespec ts; clock_gettime(CLOCK_MONOTONIC, &ts); + return time_spec_t(ts.tv_sec, ts.tv_nsec, 1e9); +} +#endif /* HAVE_CLOCK_GETTIME */ + + +#ifdef HAVE_MACH_ABSOLUTE_TIME +#include <mach/mach_time.h> +time_spec_t time_spec_t::get_system_time(void){ + mach_timebase_info_data_t info; mach_timebase_info(&info); + intmax_t nanosecs = mach_absolute_time()*info.numer/info.denom; + return time_spec_t_from_counts(nanosecs, intmax_t(1e9)); +} +#endif /* HAVE_MACH_ABSOLUTE_TIME */ + + +#ifdef HAVE_QUERY_PERFORMANCE_COUNTER +#include <Windows.h> +time_spec_t time_spec_t::get_system_time(void){ + LARGE_INTEGER counts, freq; + QueryPerformanceCounter(&counts); + QueryPerformanceFrequency(&freq); + return time_spec_t_from_counts(counts.QuadPart, freq.QuadPart); +} +#endif /* HAVE_QUERY_PERFORMANCE_COUNTER */ + + +#ifdef HAVE_MICROSEC_CLOCK +#include <boost/date_time/posix_time/posix_time.hpp> +namespace pt = boost::posix_time; +time_spec_t time_spec_t::get_system_time(void){ + pt::ptime time_now = pt::microsec_clock::universal_time(); + pt::time_duration time_dur = time_now - pt::from_time_t(0); + return time_spec_t( + time_t(time_dur.total_seconds()), + long(time_dur.fractional_seconds()), + double(pt::time_duration::ticks_per_second()) + ); +} +#endif /* HAVE_MICROSEC_CLOCK */ + +/*********************************************************************** + * Time spec constructors + **********************************************************************/ +time_spec_t::time_spec_t(double secs): + _full_secs(0), + _frac_secs(secs) +{ + /* NOP */ +} + +time_spec_t::time_spec_t(time_t full_secs, double frac_secs): + _full_secs(full_secs), + _frac_secs(frac_secs) +{ + /* NOP */ +} + +time_spec_t::time_spec_t(time_t full_secs, long tick_count, double tick_rate): + _full_secs(full_secs), + _frac_secs(tick_count/tick_rate) +{ + /* NOP */ +} + +/*********************************************************************** + * Time spec accessors + **********************************************************************/ +long time_spec_t::get_tick_count(double tick_rate) const{ + return boost::math::iround(this->get_frac_secs()*tick_rate); +} + +double time_spec_t::get_real_secs(void) const{ + return this->_full_secs + this->_frac_secs; +} + +time_t time_spec_t::get_full_secs(void) const{ + return this->_full_secs + time_t(this->_frac_secs); +} + +double time_spec_t::get_frac_secs(void) const{ + return this->_frac_secs - time_t(this->_frac_secs); +} + +/*********************************************************************** + * Time spec math overloads + **********************************************************************/ +time_spec_t &time_spec_t::operator+=(const time_spec_t &rhs){ + this->_full_secs += rhs.get_full_secs(); + this->_frac_secs += rhs.get_frac_secs(); + return *this; +} + +time_spec_t &time_spec_t::operator-=(const time_spec_t &rhs){ + this->_full_secs -= rhs.get_full_secs(); + this->_frac_secs -= rhs.get_frac_secs(); + return *this; +} + +bool uhd::operator==(const time_spec_t &lhs, const time_spec_t &rhs){ + return + lhs.get_full_secs() == rhs.get_full_secs() and + lhs.get_frac_secs() == rhs.get_frac_secs() + ; +} + +bool uhd::operator<(const time_spec_t &lhs, const time_spec_t &rhs){ + return ( + (lhs.get_full_secs() < rhs.get_full_secs()) or ( + (lhs.get_full_secs() == rhs.get_full_secs()) and + (lhs.get_frac_secs() < rhs.get_frac_secs()) + )); +} diff --git a/host/lib/types/tune.cpp b/host/lib/types/tune.cpp new file mode 100644 index 000000000..601bc20e8 --- /dev/null +++ b/host/lib/types/tune.cpp @@ -0,0 +1,52 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/types/tune_request.hpp> +#include <uhd/types/tune_result.hpp> +#include <boost/format.hpp> + +using namespace uhd; + +tune_request_t::tune_request_t(double target_freq): + target_freq(target_freq), + inter_freq_policy(POLICY_AUTO), + dsp_freq_policy(POLICY_AUTO) +{ + /* NOP */ +} + +tune_request_t::tune_request_t(double target_freq, double lo_off): + target_freq(target_freq), + inter_freq_policy(POLICY_MANUAL), + inter_freq(target_freq + lo_off), + dsp_freq_policy(POLICY_AUTO) +{ + /* NOP */ +} + +std::string tune_result_t::to_pp_string(void) const{ + return str(boost::format( + "Tune Result:\n" + " Target Intermediate Freq: %f (MHz)\n" + " Actual Intermediate Freq: %f (MHz)\n" + " Target DSP Freq Shift: %f (MHz)\n" + " Actual DSP Freq Shift: %f (MHz)\n" + ) + % (target_inter_freq/1e6) % (actual_inter_freq/1e6) + % (target_dsp_freq/1e6) % (actual_dsp_freq/1e6) + ); +} diff --git a/host/lib/types/types.cpp b/host/lib/types/types.cpp new file mode 100644 index 000000000..7c65d2997 --- /dev/null +++ b/host/lib/types/types.cpp @@ -0,0 +1,91 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/types/stream_cmd.hpp> +#include <uhd/types/metadata.hpp> +#include <uhd/types/otw_type.hpp> +#include <uhd/types/io_type.hpp> +#include <boost/cstdint.hpp> +#include <stdexcept> +#include <complex> +#include <vector> + +using namespace uhd; + +/*********************************************************************** + * stream command + **********************************************************************/ +stream_cmd_t::stream_cmd_t(const stream_mode_t &stream_mode): + stream_mode(stream_mode), + num_samps(0), + stream_now(true) +{ + /* NOP */ +} + +/*********************************************************************** + * metadata + **********************************************************************/ +tx_metadata_t::tx_metadata_t(void): + has_time_spec(false), + time_spec(time_spec_t()), + start_of_burst(false), + end_of_burst(false) +{ + /* NOP */ +} + +/*********************************************************************** + * otw type + **********************************************************************/ +size_t otw_type_t::get_sample_size(void) const{ + return (this->width * 2) / 8; +} + +otw_type_t::otw_type_t(void): + width(0), + shift(0), + byteorder(BO_NATIVE) +{ + /* NOP */ +} + +/*********************************************************************** + * io type + **********************************************************************/ +static std::vector<size_t> get_tid_size_table(void){ + std::vector<size_t> table(128, 0); + table[size_t(io_type_t::COMPLEX_FLOAT64)] = sizeof(std::complex<double>); + table[size_t(io_type_t::COMPLEX_FLOAT32)] = sizeof(std::complex<float>); + table[size_t(io_type_t::COMPLEX_INT16)] = sizeof(std::complex<boost::int16_t>); + table[size_t(io_type_t::COMPLEX_INT8)] = sizeof(std::complex<boost::int8_t>); + return table; +} + +static const std::vector<size_t> tid_size_table(get_tid_size_table()); + +io_type_t::io_type_t(tid_t tid): + size(tid_size_table[size_t(tid) & 0x7f]), tid(tid) +{ + /* NOP */ +} + +io_type_t::io_type_t(size_t size): + size(size), tid(CUSTOM_TYPE) +{ + /* NOP */ +} diff --git a/host/lib/usrp/CMakeLists.txt b/host/lib/usrp/CMakeLists.txt new file mode 100644 index 000000000..59dabbd58 --- /dev/null +++ b/host/lib/usrp/CMakeLists.txt @@ -0,0 +1,39 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# This file included, use CMake directory variables +######################################################################## +LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/dboard_base.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dboard_eeprom.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dboard_id.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dboard_iface.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dboard_manager.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dsp_utils.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/gps_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/mboard_eeprom.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/misc_utils.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/multi_usrp.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/subdev_spec.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/tune_helper.cpp +) + +INCLUDE_SUBDIRECTORY(dboard) +INCLUDE_SUBDIRECTORY(usrp1) +INCLUDE_SUBDIRECTORY(usrp2) +INCLUDE_SUBDIRECTORY(usrp_e100) diff --git a/host/lib/usrp/README b/host/lib/usrp/README new file mode 100644 index 000000000..344209179 --- /dev/null +++ b/host/lib/usrp/README @@ -0,0 +1,15 @@ +######################################################################## +# lib USRP directories: +######################################################################## + +dboard: + Daughterboard implementation code for all USRP daughterboards + +usrp1: + Implementation code for the USB-based USRP Classic motherboard. + +usrp2: + Implementation code for USRP2, USRP-N200, and USRP-N210. + +usrp_e100: + Implementation code for USRP-E100. diff --git a/host/lib/usrp/dboard/CMakeLists.txt b/host/lib/usrp/dboard/CMakeLists.txt new file mode 100644 index 000000000..7bd201294 --- /dev/null +++ b/host/lib/usrp/dboard/CMakeLists.txt @@ -0,0 +1,32 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# This file included, use CMake directory variables +######################################################################## + +LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/db_basic_and_lf.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/db_rfx.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/db_xcvr2450.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/db_wbx.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/db_dbsrx.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/db_unknown.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/db_tvrx.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/db_dbsrx2.cpp +) + diff --git a/host/lib/usrp/dboard/db_basic_and_lf.cpp b/host/lib/usrp/dboard/db_basic_and_lf.cpp new file mode 100644 index 000000000..3fffeab0c --- /dev/null +++ b/host/lib/usrp/dboard/db_basic_and_lf.cpp @@ -0,0 +1,321 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/types/ranges.hpp> +#include <uhd/utils/assert_has.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/utils/warning.hpp> +#include <uhd/usrp/dboard_base.hpp> +#include <uhd/usrp/dboard_manager.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/format.hpp> + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +/*********************************************************************** + * Constants + **********************************************************************/ +static const uhd::dict<std::string, double> subdev_bandwidth_scalar = map_list_of + ("A", 1.0) + ("B", 1.0) + ("AB", 2.0) + ("BA", 2.0) +; + +/*********************************************************************** + * The basic and lf boards: + * They share a common class because only the frequency bounds differ. + **********************************************************************/ +class basic_rx : public rx_dboard_base{ +public: + basic_rx(ctor_args_t args, double max_freq); + ~basic_rx(void); + + void rx_get(const wax::obj &key, wax::obj &val); + void rx_set(const wax::obj &key, const wax::obj &val); + +private: + double _max_freq; +}; + +class basic_tx : public tx_dboard_base{ +public: + basic_tx(ctor_args_t args, double max_freq); + ~basic_tx(void); + + void tx_get(const wax::obj &key, wax::obj &val); + void tx_set(const wax::obj &key, const wax::obj &val); + +private: + double _max_freq; +}; + +static const uhd::dict<std::string, subdev_conn_t> sd_name_to_conn = map_list_of + ("AB", SUBDEV_CONN_COMPLEX_IQ) + ("BA", SUBDEV_CONN_COMPLEX_QI) + ("A", SUBDEV_CONN_REAL_I) + ("B", SUBDEV_CONN_REAL_Q) +; + +/*********************************************************************** + * Register the basic and LF dboards + **********************************************************************/ +static dboard_base::sptr make_basic_rx(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new basic_rx(args, 250e6)); +} + +static dboard_base::sptr make_basic_tx(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new basic_tx(args, 250e6)); +} + +static dboard_base::sptr make_lf_rx(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new basic_rx(args, 32e6)); +} + +static dboard_base::sptr make_lf_tx(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new basic_tx(args, 32e6)); +} + +UHD_STATIC_BLOCK(reg_basic_and_lf_dboards){ + dboard_manager::register_dboard(0x0000, &make_basic_tx, "Basic TX", sd_name_to_conn.keys()); + dboard_manager::register_dboard(0x0001, &make_basic_rx, "Basic RX", sd_name_to_conn.keys()); + dboard_manager::register_dboard(0x000e, &make_lf_tx, "LF TX", sd_name_to_conn.keys()); + dboard_manager::register_dboard(0x000f, &make_lf_rx, "LF RX", sd_name_to_conn.keys()); +} + +/*********************************************************************** + * Basic and LF RX dboard + **********************************************************************/ +basic_rx::basic_rx(ctor_args_t args, double max_freq) : rx_dboard_base(args){ + _max_freq = max_freq; + + //set GPIOs to output 0x0000 to decrease noise pickup + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, 0x0000); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, 0xFFFF); + this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, 0x0000); +} + +basic_rx::~basic_rx(void){ + /* NOP */ +} + +void basic_rx::rx_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = std::string(str(boost::format("%s - %s") + % get_rx_id().to_pp_string() + % get_subdev_name() + )); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + val = double(0); + return; + + case SUBDEV_PROP_GAIN_RANGE: + val = gain_range_t(0, 0, 0); + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_FREQ: + val = double(0); + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = freq_range_t(-_max_freq, +_max_freq); + return; + + case SUBDEV_PROP_ANTENNA: + val = std::string(""); + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = prop_names_t(1, ""); //vector of 1 empty string + return; + + case SUBDEV_PROP_CONNECTION: + val = sd_name_to_conn[get_subdev_name()]; + return; + + case SUBDEV_PROP_ENABLED: + val = true; //always enabled + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_BANDWIDTH: + val = subdev_bandwidth_scalar[get_subdev_name()]*_max_freq; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void basic_rx::rx_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_GAIN: + UHD_ASSERT_THROW(val.as<double>() == double(0)); + return; + + case SUBDEV_PROP_ANTENNA: + if (val.as<std::string>().empty()) return; + throw uhd::value_error("no selectable antennas on this board"); + + case SUBDEV_PROP_FREQ: + return; // it wont do you much good, but you can set it + + case SUBDEV_PROP_ENABLED: + return; //always enabled + + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("%s: No tunable bandwidth, fixed filtered to %0.2fMHz") + % get_rx_id().to_pp_string() % _max_freq + ) + ); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * Basic and LF TX dboard + **********************************************************************/ +basic_tx::basic_tx(ctor_args_t args, double max_freq) : tx_dboard_base(args){ + _max_freq = max_freq; +} + +basic_tx::~basic_tx(void){ + /* NOP */ +} + +void basic_tx::tx_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = std::string(str(boost::format("%s - %s") + % get_tx_id().to_pp_string() + % get_subdev_name() + )); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + val = double(0); + return; + + case SUBDEV_PROP_GAIN_RANGE: + val = gain_range_t(0, 0, 0); + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_FREQ: + val = double(0); + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = freq_range_t(-_max_freq, +_max_freq); + return; + + case SUBDEV_PROP_ANTENNA: + val = std::string(""); + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = prop_names_t(1, ""); //vector of 1 empty string + return; + + case SUBDEV_PROP_CONNECTION: + val = sd_name_to_conn[get_subdev_name()]; + return; + + case SUBDEV_PROP_ENABLED: + val = true; //always enabled + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_BANDWIDTH: + val = subdev_bandwidth_scalar[get_subdev_name()]*_max_freq; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void basic_tx::tx_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_GAIN: + UHD_ASSERT_THROW(val.as<double>() == double(0)); + return; + + case SUBDEV_PROP_ANTENNA: + if (val.as<std::string>().empty()) return; + throw uhd::value_error("no selectable antennas on this board"); + + case SUBDEV_PROP_FREQ: + return; // it wont do you much good, but you can set it + + case SUBDEV_PROP_ENABLED: + return; //always enabled + + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("%s: No tunable bandwidth, fixed filtered to %0.2fMHz") + % get_tx_id().to_pp_string() % _max_freq + ) + ); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/dboard/db_dbsrx.cpp b/host/lib/usrp/dboard/db_dbsrx.cpp new file mode 100644 index 000000000..b984608ca --- /dev/null +++ b/host/lib/usrp/dboard/db_dbsrx.cpp @@ -0,0 +1,606 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +// No RX IO Pins Used + +// RX IO Functions + +#include "max2118_regs.hpp" +#include <uhd/utils/static.hpp> +#include <uhd/utils/assert_has.hpp> +#include <uhd/utils/algorithm.hpp> +#include <uhd/utils/warning.hpp> +#include <uhd/types/ranges.hpp> +#include <uhd/types/sensors.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/usrp/dboard_base.hpp> +#include <uhd/usrp/dboard_manager.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <boost/math/special_functions/round.hpp> +#include <utility> +#include <cmath> + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +/*********************************************************************** + * The DBSRX constants + **********************************************************************/ +static const bool dbsrx_debug = false; + +static const freq_range_t dbsrx_freq_range(0.8e9, 2.4e9); + +static const freq_range_t dbsrx_pfd_freq_range(0.15e6, 2.01e6); + +static const prop_names_t dbsrx_antennas = list_of("J3"); + +static const uhd::dict<std::string, gain_range_t> dbsrx_gain_ranges = map_list_of + ("GC1", gain_range_t(0, 56, 0.5)) + ("GC2", gain_range_t(0, 24, 1)) +; + +/*********************************************************************** + * The DBSRX dboard class + **********************************************************************/ +class dbsrx : public rx_dboard_base{ +public: + dbsrx(ctor_args_t args); + ~dbsrx(void); + + void rx_get(const wax::obj &key, wax::obj &val); + void rx_set(const wax::obj &key, const wax::obj &val); + +private: + double _lo_freq; + double _bandwidth; + uhd::dict<std::string, double> _gains; + max2118_write_regs_t _max2118_write_regs; + max2118_read_regs_t _max2118_read_regs; + boost::uint8_t _max2118_addr(void){ + return (this->get_iface()->get_special_props().mangle_i2c_addrs)? 0x65 : 0x67; + }; + + void set_lo_freq(double target_freq); + void set_gain(double gain, const std::string &name); + void set_bandwidth(double bandwidth); + + void send_reg(boost::uint8_t start_reg, boost::uint8_t stop_reg){ + start_reg = boost::uint8_t(uhd::clip(int(start_reg), 0x0, 0x5)); + stop_reg = boost::uint8_t(uhd::clip(int(stop_reg), 0x0, 0x5)); + + for(boost::uint8_t start_addr=start_reg; start_addr <= stop_reg; start_addr += sizeof(boost::uint32_t) - 1){ + int num_bytes = int(stop_reg - start_addr + 1) > int(sizeof(boost::uint32_t)) - 1 ? sizeof(boost::uint32_t) - 1 : stop_reg - start_addr + 1; + + //create buffer for register data (+1 for start address) + byte_vector_t regs_vector(num_bytes + 1); + + //first byte is the address of first register + regs_vector[0] = start_addr; + + //get the register data + for(int i=0; i<num_bytes; i++){ + regs_vector[1+i] = _max2118_write_regs.get_reg(start_addr+i); + if(dbsrx_debug) std::cerr << boost::format( + "DBSRX: send reg 0x%02x, value 0x%04x, start_addr = 0x%04x, num_bytes %d" + ) % int(start_addr+i) % int(regs_vector[1+i]) % int(start_addr) % num_bytes << std::endl; + } + + //send the data + this->get_iface()->write_i2c( + _max2118_addr(), regs_vector + ); + } + } + + void read_reg(boost::uint8_t start_reg, boost::uint8_t stop_reg){ + static const boost::uint8_t status_addr = 0x0; + start_reg = boost::uint8_t(uhd::clip(int(start_reg), 0x0, 0x1)); + stop_reg = boost::uint8_t(uhd::clip(int(stop_reg), 0x0, 0x1)); + + for(boost::uint8_t start_addr=start_reg; start_addr <= stop_reg; start_addr += sizeof(boost::uint32_t)){ + int num_bytes = int(stop_reg - start_addr + 1) > int(sizeof(boost::uint32_t)) ? sizeof(boost::uint32_t) : stop_reg - start_addr + 1; + + //create buffer for register data + byte_vector_t regs_vector(num_bytes); + + //read from i2c + regs_vector = this->get_iface()->read_i2c( + _max2118_addr(), num_bytes + ); + + for(boost::uint8_t i=0; i < num_bytes; i++){ + if (i + start_addr >= status_addr){ + _max2118_read_regs.set_reg(i + start_addr, regs_vector[i]); + } + if(dbsrx_debug) std::cerr << boost::format( + "DBSRX: read reg 0x%02x, value 0x%04x, start_addr = 0x%04x, num_bytes %d" + ) % int(start_addr+i) % int(regs_vector[i]) % int(start_addr) % num_bytes << std::endl; + } + } + } + + /*! + * Is the LO locked? + * \return true for locked + */ + bool get_locked(void){ + read_reg(0x0, 0x0); + + //mask and return lock detect + bool locked = 5 >= _max2118_read_regs.adc and _max2118_read_regs.adc >= 2; + + if(dbsrx_debug) std::cerr << boost::format( + "DBSRX: locked %d" + ) % locked << std::endl; + + return locked; + } + +}; + +/*********************************************************************** + * Register the DBSRX dboard + **********************************************************************/ +static dboard_base::sptr make_dbsrx(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new dbsrx(args)); +} + +UHD_STATIC_BLOCK(reg_dbsrx_dboard){ + //register the factory function for the rx dbid (others version) + dboard_manager::register_dboard(0x000D, &make_dbsrx, "DBSRX"); + //register the factory function for the rx dbid (USRP1 version) + dboard_manager::register_dboard(0x0002, &make_dbsrx, "DBSRX"); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +dbsrx::dbsrx(ctor_args_t args) : rx_dboard_base(args){ + //warn user about incorrect DBID on USRP1, requires R193 populated + if (this->get_iface()->get_special_props().soft_clock_divider and this->get_rx_id() == 0x000D) + uhd::warning::post( + str(boost::format( + "DBSRX: incorrect dbid\n" + "Expected dbid 0x0002 and R193\n" + "found dbid == %d\n" + "Please see the daughterboard app notes" + ) % this->get_rx_id().to_pp_string()) + ); + + //warn user about incorrect DBID on non-USRP1, requires R194 populated + if (not this->get_iface()->get_special_props().soft_clock_divider and this->get_rx_id() == 0x0002) + uhd::warning::post( + str(boost::format( + "DBSRX: incorrect dbid\n" + "Expected dbid 0x000D and R194\n" + "found dbid == %d\n" + "Please see the daughterboard app notes" + ) % this->get_rx_id().to_pp_string()) + ); + + //enable only the clocks we need + this->get_iface()->set_clock_enabled(dboard_iface::UNIT_RX, true); + + //set the gpio directions and atr controls (identically) + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, 0x0); // All unused in atr + if (this->get_iface()->get_special_props().soft_clock_divider){ + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, 0x1); // GPIO0 is clock + } + else{ + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, 0x0); // All Inputs + } + + //send initial register settings + this->send_reg(0x0, 0x5); + + //set defaults for LO, gains, and filter bandwidth + _bandwidth = 33e6; + set_lo_freq(dbsrx_freq_range.start()); + + BOOST_FOREACH(const std::string &name, dbsrx_gain_ranges.keys()){ + set_gain(dbsrx_gain_ranges[name].start(), name); + } + + set_bandwidth(33e6); // default bandwidth from datasheet +} + +dbsrx::~dbsrx(void){ +} + + +/*********************************************************************** + * Tuning + **********************************************************************/ +void dbsrx::set_lo_freq(double target_freq){ + target_freq = dbsrx_freq_range.clip(target_freq); + + double actual_freq=0.0, pfd_freq=0.0, ref_clock=0.0; + int R=0, N=0, r=0, m=0; + bool update_filter_settings = false; + //choose refclock + std::vector<double> clock_rates = this->get_iface()->get_clock_rates(dboard_iface::UNIT_RX); + const double max_clock_rate = uhd::sorted(clock_rates).back(); + BOOST_FOREACH(ref_clock, uhd::reversed(uhd::sorted(clock_rates))){ + if (ref_clock > 27.0e6) continue; + if (size_t(max_clock_rate/ref_clock)%2 == 1) continue; //reject asymmetric clocks (odd divisors) + + //choose m_divider such that filter tuning constraint is met + m = 31; + while ((ref_clock/m < 1e6 or ref_clock/m > 2.5e6) and m > 0){ m--; } + + if(dbsrx_debug) std::cerr << boost::format( + "DBSRX: trying ref_clock %f and m_divider %d" + ) % (ref_clock) % m << std::endl; + + if (m >= 32) continue; + + //choose R + for(r = 0; r <= 6; r += 1) { + //compute divider from setting + R = 1 << (r+1); + if (dbsrx_debug) std::cerr << boost::format("DBSRX R:%d\n") % R << std::endl; + + //compute PFD compare frequency = ref_clock/R + pfd_freq = ref_clock / R; + + //constrain the PFD frequency to specified range + if ((pfd_freq < dbsrx_pfd_freq_range.start()) or (pfd_freq > dbsrx_pfd_freq_range.stop())) continue; + + //compute N + N = int(std::floor(target_freq/pfd_freq)); + + //constrain N to specified range + if ((N < 256) or (N > 32768)) continue; + + goto done_loop; + } + } + + done_loop: + + //Assert because we failed to find a suitable combination of ref_clock, R and N + UHD_ASSERT_THROW(ref_clock <= 27.0e6 and ref_clock >= 0.0); + UHD_ASSERT_THROW(ref_clock/m >= 1e6 and ref_clock/m <= 2.5e6); + UHD_ASSERT_THROW((pfd_freq >= dbsrx_pfd_freq_range.start()) and (pfd_freq <= dbsrx_pfd_freq_range.stop())); + UHD_ASSERT_THROW((N >= 256) and (N <= 32768)); + + if(dbsrx_debug) std::cerr << boost::format( + "DBSRX: choose ref_clock (current: %f, new: %f) and m_divider %d" + ) % (this->get_iface()->get_clock_rate(dboard_iface::UNIT_RX)) % ref_clock % m << std::endl; + + //if ref_clock or m divider changed, we need to update the filter settings + if (ref_clock != this->get_iface()->get_clock_rate(dboard_iface::UNIT_RX) or m != _max2118_write_regs.m_divider) update_filter_settings = true; + + //compute resulting output frequency + actual_freq = pfd_freq * N; + + //apply ref_clock, R, and N settings + this->get_iface()->set_clock_rate(dboard_iface::UNIT_RX, ref_clock); + ref_clock = this->get_iface()->get_clock_rate(dboard_iface::UNIT_RX); + _max2118_write_regs.m_divider = m; + _max2118_write_regs.r_divider = (max2118_write_regs_t::r_divider_t) r; + _max2118_write_regs.set_n_divider(N); + _max2118_write_regs.ade_vco_ade_read = max2118_write_regs_t::ADE_VCO_ADE_READ_ENABLED; + + //compute prescaler variables + int scaler = actual_freq > 1125e6 ? 2 : 4; + _max2118_write_regs.div2 = scaler == 4 ? max2118_write_regs_t::DIV2_DIV4 : max2118_write_regs_t::DIV2_DIV2; + + if(dbsrx_debug) std::cerr << boost::format( + "DBSRX: scaler %d, actual_freq %f MHz, register bit: %d" + ) % scaler % (actual_freq/1e6) % int(_max2118_write_regs.div2) << std::endl; + + //compute vco frequency and select vco + double vco_freq = actual_freq * scaler; + if (vco_freq < 2433e6) + _max2118_write_regs.osc_band = 0; + else if (vco_freq < 2711e6) + _max2118_write_regs.osc_band = 1; + else if (vco_freq < 3025e6) + _max2118_write_regs.osc_band = 2; + else if (vco_freq < 3341e6) + _max2118_write_regs.osc_band = 3; + else if (vco_freq < 3727e6) + _max2118_write_regs.osc_band = 4; + else if (vco_freq < 4143e6) + _max2118_write_regs.osc_band = 5; + else if (vco_freq < 4493e6) + _max2118_write_regs.osc_band = 6; + else + _max2118_write_regs.osc_band = 7; + + //send settings over i2c + send_reg(0x0, 0x4); + + //check vtune for lock condition + read_reg(0x0, 0x0); + + if(dbsrx_debug) std::cerr << boost::format( + "DBSRX: initial guess for vco %d, vtune adc %d" + ) % int(_max2118_write_regs.osc_band) % int(_max2118_read_regs.adc) << std::endl; + + //if we are out of lock for chosen vco, change vco + while ((_max2118_read_regs.adc == 0) or (_max2118_read_regs.adc == 7)){ + + //vtune is too low, try lower frequency vco + if (_max2118_read_regs.adc == 0){ + if (_max2118_write_regs.osc_band == 0){ + uhd::warning::post( + str(boost::format( + "DBSRX: Tuning exceeded vco range, _max2118_write_regs.osc_band == %d\n" + ) % int(_max2118_write_regs.osc_band)) + ); + UHD_ASSERT_THROW(_max2118_read_regs.adc != 0); //just to cause a throw + } + if (_max2118_write_regs.osc_band <= 0) break; + _max2118_write_regs.osc_band -= 1; + } + + //vtune is too high, try higher frequency vco + if (_max2118_read_regs.adc == 7){ + if (_max2118_write_regs.osc_band == 7){ + uhd::warning::post( + str(boost::format( + "DBSRX: Tuning exceeded vco range, _max2118_write_regs.osc_band == %d\n" + ) % int(_max2118_write_regs.osc_band)) + ); + UHD_ASSERT_THROW(_max2118_read_regs.adc != 7); //just to cause a throw + } + if (_max2118_write_regs.osc_band >= 7) break; + _max2118_write_regs.osc_band += 1; + } + + if(dbsrx_debug) std::cerr << boost::format( + "DBSRX: trying vco %d, vtune adc %d" + ) % int(_max2118_write_regs.osc_band) % int(_max2118_read_regs.adc) << std::endl; + + //update vco selection and check vtune + send_reg(0x2, 0x2); + read_reg(0x0, 0x0); + + //allow for setup time before checking condition again + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); + } + + if(dbsrx_debug) std::cerr << boost::format( + "DBSRX: final vco %d, vtune adc %d" + ) % int(_max2118_write_regs.osc_band) % int(_max2118_read_regs.adc) << std::endl; + + //select charge pump bias current + if (_max2118_read_regs.adc <= 2) _max2118_write_regs.cp_current = max2118_write_regs_t::CP_CURRENT_I_CP_100UA; + else if (_max2118_read_regs.adc >= 5) _max2118_write_regs.cp_current = max2118_write_regs_t::CP_CURRENT_I_CP_400UA; + else _max2118_write_regs.cp_current = max2118_write_regs_t::CP_CURRENT_I_CP_200UA; + + //update charge pump bias current setting + send_reg(0x2, 0x2); + + //compute actual tuned frequency + _lo_freq = this->get_iface()->get_clock_rate(dboard_iface::UNIT_RX) / std::pow(2.0,(1 + _max2118_write_regs.r_divider)) * _max2118_write_regs.get_n_divider(); + + //debug output of calculated variables + if (dbsrx_debug) std::cerr + << boost::format("DBSRX tune:\n") + << boost::format(" VCO=%d, CP=%d, PFD Freq=%fMHz\n") % int(_max2118_write_regs.osc_band) % _max2118_write_regs.cp_current % (pfd_freq/1e6) + << boost::format(" R=%d, N=%f, scaler=%d, div2=%d\n") % R % N % scaler % int(_max2118_write_regs.div2) + << boost::format(" Ref Freq=%fMHz\n") % (ref_clock/1e6) + << boost::format(" Target Freq=%fMHz\n") % (target_freq/1e6) + << boost::format(" Actual Freq=%fMHz\n") % (_lo_freq/1e6) + << boost::format(" VCO Freq=%fMHz\n") % (vco_freq/1e6) + << std::endl; + + if (update_filter_settings) set_bandwidth(_bandwidth); + get_locked(); +} + +/*********************************************************************** + * Gain Handling + **********************************************************************/ +/*! + * Convert a requested gain for the GC2 vga into the integer register value. + * The gain passed into the function will be set to the actual value. + * \param gain the requested gain in dB + * \return 5 bit the register value + */ +static int gain_to_gc2_vga_reg(double &gain){ + int reg = 0; + gain = dbsrx_gain_ranges["GC2"].clip(gain); + + // Half dB steps from 0-5dB, 1dB steps from 5-24dB + if (gain < 5) { + reg = boost::math::iround(31.0 - gain/0.5); + gain = double(boost::math::iround(gain) * 0.5); + } else { + reg = boost::math::iround(22.0 - (gain - 4.0)); + gain = double(boost::math::iround(gain)); + } + + if (dbsrx_debug) std::cerr << boost::format( + "DBSRX GC2 Gain: %f dB, reg: %d" + ) % gain % reg << std::endl; + + return reg; +} + +/*! + * Convert a requested gain for the GC1 rf vga into the dac_volts value. + * The gain passed into the function will be set to the actual value. + * \param gain the requested gain in dB + * \return dac voltage value + */ +static double gain_to_gc1_rfvga_dac(double &gain){ + //clip the input + gain = dbsrx_gain_ranges["GC1"].clip(gain); + + //voltage level constants + static const double max_volts = 1.2, min_volts = 2.7; + static const double slope = (max_volts-min_volts)/dbsrx_gain_ranges["GC1"].stop(); + + //calculate the voltage for the aux dac + double dac_volts = gain*slope + min_volts; + + if (dbsrx_debug) std::cerr << boost::format( + "DBSRX GC1 Gain: %f dB, dac_volts: %f V" + ) % gain % dac_volts << std::endl; + + //the actual gain setting + gain = (dac_volts - min_volts)/slope; + + return dac_volts; +} + +void dbsrx::set_gain(double gain, const std::string &name){ + assert_has(dbsrx_gain_ranges.keys(), name, "dbsrx gain name"); + if (name == "GC2"){ + _max2118_write_regs.gc2 = gain_to_gc2_vga_reg(gain); + send_reg(0x5, 0x5); + } + else if(name == "GC1"){ + //write the new voltage to the aux dac + this->get_iface()->write_aux_dac(dboard_iface::UNIT_RX, dboard_iface::AUX_DAC_A, gain_to_gc1_rfvga_dac(gain)); + } + else UHD_THROW_INVALID_CODE_PATH(); + _gains[name] = gain; +} + +/*********************************************************************** + * Bandwidth Handling + **********************************************************************/ +void dbsrx::set_bandwidth(double bandwidth){ + //clip the input + bandwidth = uhd::clip<double>(bandwidth, 4e6, 33e6); + + double ref_clock = this->get_iface()->get_clock_rate(dboard_iface::UNIT_RX); + + //NOTE: _max2118_write_regs.m_divider set in set_lo_freq + + //compute f_dac setting + _max2118_write_regs.f_dac = uhd::clip<int>(int((((bandwidth*_max2118_write_regs.m_divider)/ref_clock) - 4)/0.145),0,127); + + //determine actual bandwidth + _bandwidth = double((ref_clock/(_max2118_write_regs.m_divider))*(4+0.145*_max2118_write_regs.f_dac)); + + if (dbsrx_debug) std::cerr << boost::format( + "DBSRX Filter Bandwidth: %f MHz, m: %d, f_dac: %d\n" + ) % (_bandwidth/1e6) % int(_max2118_write_regs.m_divider) % int(_max2118_write_regs.f_dac) << std::endl; + + this->send_reg(0x3, 0x4); +} + +/*********************************************************************** + * RX Get and Set + **********************************************************************/ +void dbsrx::rx_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = get_rx_id().to_pp_string(); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + assert_has(_gains.keys(), key.name, "dbsrx gain name"); + val = _gains[key.name]; + return; + + case SUBDEV_PROP_GAIN_RANGE: + assert_has(dbsrx_gain_ranges.keys(), key.name, "dbsrx gain name"); + val = dbsrx_gain_ranges[key.name]; + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(dbsrx_gain_ranges.keys()); + return; + + case SUBDEV_PROP_FREQ: + val = _lo_freq; + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = dbsrx_freq_range; + return; + + case SUBDEV_PROP_ANTENNA: + val = std::string("J3"); + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = dbsrx_antennas; + return; + + case SUBDEV_PROP_CONNECTION: + val = SUBDEV_CONN_COMPLEX_IQ; + return; + + case SUBDEV_PROP_ENABLED: + val = true; //always enabled + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_SENSOR: + UHD_ASSERT_THROW(key.name == "lo_locked"); + val = sensor_value_t("LO", this->get_locked(), "locked", "unlocked"); + return; + + case SUBDEV_PROP_SENSOR_NAMES: + val = prop_names_t(1, "lo_locked"); + return; + + case SUBDEV_PROP_BANDWIDTH: + val = 2*_bandwidth; //_bandwidth is low-pass, we want complex double-sided + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void dbsrx::rx_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + this->set_lo_freq(val.as<double>()); + return; + + case SUBDEV_PROP_GAIN: + this->set_gain(val.as<double>(), key.name); + return; + + case SUBDEV_PROP_ENABLED: + return; //always enabled + + case SUBDEV_PROP_BANDWIDTH: + this->set_bandwidth(val.as<double>()/2.0); //complex double-sided, we want low-pass + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + diff --git a/host/lib/usrp/dboard/db_dbsrx2.cpp b/host/lib/usrp/dboard/db_dbsrx2.cpp new file mode 100644 index 000000000..e7b42cb05 --- /dev/null +++ b/host/lib/usrp/dboard/db_dbsrx2.cpp @@ -0,0 +1,445 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +// No RX IO Pins Used + +#include "max2112_regs.hpp" +#include <uhd/utils/static.hpp> +#include <uhd/utils/assert_has.hpp> +#include <uhd/utils/algorithm.hpp> +#include <uhd/types/ranges.hpp> +#include <uhd/types/sensors.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/usrp/dboard_base.hpp> +#include <uhd/usrp/dboard_manager.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <boost/math/special_functions/round.hpp> +#include <utility> + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +/*********************************************************************** + * The DBSRX2 constants + **********************************************************************/ +static const bool dbsrx2_debug = false; + +static const freq_range_t dbsrx2_freq_range(0.8e9, 2.4e9); + +static const int dbsrx2_ref_divider = 4; // Hitachi HMC426 divider (U7) + +static const prop_names_t dbsrx2_antennas = list_of("J3"); + +static const uhd::dict<std::string, gain_range_t> dbsrx2_gain_ranges = map_list_of + ("GC1", gain_range_t(0, 73, 0.05)) + ("BBG", gain_range_t(0, 15, 1)) +; + +/*********************************************************************** + * The DBSRX2 dboard class + **********************************************************************/ +class dbsrx2 : public rx_dboard_base{ +public: + dbsrx2(ctor_args_t args); + ~dbsrx2(void); + + void rx_get(const wax::obj &key, wax::obj &val); + void rx_set(const wax::obj &key, const wax::obj &val); + +private: + double _lo_freq; + double _bandwidth; + uhd::dict<std::string, double> _gains; + max2112_write_regs_t _max2112_write_regs; + max2112_read_regs_t _max2112_read_regs; + boost::uint8_t _max2112_addr(){ //0x60 or 0x61 depending on which side + return (this->get_iface()->get_special_props().mangle_i2c_addrs)? 0x60 : 0x61; + } + + void set_lo_freq(double target_freq); + void set_gain(double gain, const std::string &name); + void set_bandwidth(double bandwidth); + + void send_reg(boost::uint8_t start_reg, boost::uint8_t stop_reg){ + start_reg = boost::uint8_t(uhd::clip(int(start_reg), 0x0, 0xB)); + stop_reg = boost::uint8_t(uhd::clip(int(stop_reg), 0x0, 0xB)); + + for(boost::uint8_t start_addr=start_reg; start_addr <= stop_reg; start_addr += sizeof(boost::uint32_t) - 1){ + int num_bytes = int(stop_reg - start_addr + 1) > int(sizeof(boost::uint32_t)) - 1 ? sizeof(boost::uint32_t) - 1 : stop_reg - start_addr + 1; + + //create buffer for register data (+1 for start address) + byte_vector_t regs_vector(num_bytes + 1); + + //first byte is the address of first register + regs_vector[0] = start_addr; + + //get the register data + for(int i=0; i<num_bytes; i++){ + regs_vector[1+i] = _max2112_write_regs.get_reg(start_addr+i); + if(dbsrx2_debug) std::cerr << boost::format( + "DBSRX2: send reg 0x%02x, value 0x%04x, start_addr = 0x%04x, num_bytes %d" + ) % int(start_addr+i) % int(regs_vector[1+i]) % int(start_addr) % num_bytes << std::endl; + } + + //send the data + this->get_iface()->write_i2c( + _max2112_addr(), regs_vector + ); + } + } + + void read_reg(boost::uint8_t start_reg, boost::uint8_t stop_reg){ + static const boost::uint8_t status_addr = 0xC; + start_reg = boost::uint8_t(uhd::clip(int(start_reg), 0x0, 0xD)); + stop_reg = boost::uint8_t(uhd::clip(int(stop_reg), 0x0, 0xD)); + + for(boost::uint8_t start_addr=start_reg; start_addr <= stop_reg; start_addr += sizeof(boost::uint32_t)){ + int num_bytes = int(stop_reg - start_addr + 1) > int(sizeof(boost::uint32_t)) ? sizeof(boost::uint32_t) : stop_reg - start_addr + 1; + + //create address to start reading register data + byte_vector_t address_vector(1); + address_vector[0] = start_addr; + + //send the address + this->get_iface()->write_i2c( + _max2112_addr(), address_vector + ); + + //create buffer for register data + byte_vector_t regs_vector(num_bytes); + + //read from i2c + regs_vector = this->get_iface()->read_i2c( + _max2112_addr(), num_bytes + ); + + for(boost::uint8_t i=0; i < num_bytes; i++){ + if (i + start_addr >= status_addr){ + _max2112_read_regs.set_reg(i + start_addr, regs_vector[i]); + /* + if(dbsrx2_debug) std::cerr << boost::format( + "DBSRX2: set reg 0x%02x, value 0x%04x" + ) % int(i + start_addr) % int(_max2112_read_regs.get_reg(i + start_addr)) << std::endl; + */ + } + if(dbsrx2_debug) std::cerr << boost::format( + "DBSRX2: read reg 0x%02x, value 0x%04x, start_addr = 0x%04x, num_bytes %d" + ) % int(start_addr+i) % int(regs_vector[i]) % int(start_addr) % num_bytes << std::endl; + } + } + } + + /*! + * Is the LO locked? + * \return true for locked + */ + bool get_locked(void){ + read_reg(0xC, 0xD); + + //mask and return lock detect + bool locked = (_max2112_read_regs.ld & _max2112_read_regs.vasa & _max2112_read_regs.vase) != 0; + + if(dbsrx2_debug) std::cerr << boost::format( + "DBSRX2 locked: %d" + ) % locked << std::endl; + + return locked; + } + +}; + +/*********************************************************************** + * Register the DBSRX2 dboard + **********************************************************************/ +// FIXME 0x67 is the default i2c address on USRP2 +// need to handle which side for USRP1 with different address +static dboard_base::sptr make_dbsrx2(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new dbsrx2(args)); +} + +UHD_STATIC_BLOCK(reg_dbsrx2_dboard){ + //register the factory function for the rx dbid + dboard_manager::register_dboard(0x0012, &make_dbsrx2, "DBSRX2"); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +dbsrx2::dbsrx2(ctor_args_t args) : rx_dboard_base(args){ + //enable only the clocks we need + this->get_iface()->set_clock_enabled(dboard_iface::UNIT_RX, true); + + //set the gpio directions and atr controls (identically) + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, 0x0); // All unused in atr + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, 0x0); // All Inputs + + //send initial register settings + send_reg(0x0, 0xB); + //for (boost::uint8_t addr=0; addr<=12; addr++) this->send_reg(addr, addr); + + //set defaults for LO, gains + set_lo_freq(dbsrx2_freq_range.start()); + BOOST_FOREACH(const std::string &name, dbsrx2_gain_ranges.keys()){ + set_gain(dbsrx2_gain_ranges[name].start(), name); + } + + set_bandwidth(40e6); // default bandwidth from datasheet + get_locked(); + + _max2112_write_regs.bbg = boost::math::iround(dbsrx2_gain_ranges["BBG"].start()); + send_reg(0x9, 0x9); +} + +dbsrx2::~dbsrx2(void){ +} + + +/*********************************************************************** + * Tuning + **********************************************************************/ +void dbsrx2::set_lo_freq(double target_freq){ + //target_freq = uhd::clip(target_freq, dbsrx2_freq_range.min, dbsrx2_freq_range.max); + + //variables used in the calculation below + int scaler = target_freq > 1125e6 ? 2 : 4; + double ref_freq = this->get_iface()->get_clock_rate(dboard_iface::UNIT_RX); + int R, intdiv, fracdiv, ext_div; + double N; + + //compute tuning variables + ext_div = dbsrx2_ref_divider; // 12MHz < ref_freq/ext_divider < 30MHz + + R = 1; //Divide by 1 is the only tested value + + N = (target_freq*R*ext_div)/(ref_freq); //actual spec range is (19, 251) + intdiv = int(std::floor(N)); // if (intdiv < 19 or intdiv > 251) continue; + fracdiv = boost::math::iround((N - intdiv)*double(1 << 20)); + + //calculate the actual freq from the values above + N = double(intdiv) + double(fracdiv)/double(1 << 20); + _lo_freq = (N*ref_freq)/(R*ext_div); + + //load new counters into registers + _max2112_write_regs.set_n_divider(intdiv); + _max2112_write_regs.set_f_divider(fracdiv); + _max2112_write_regs.r_divider = R; + _max2112_write_regs.d24 = scaler == 4 ? max2112_write_regs_t::D24_DIV4 : max2112_write_regs_t::D24_DIV2; + + //debug output of calculated variables + if (dbsrx2_debug) std::cerr + << boost::format("DBSRX2 tune:\n") + << boost::format(" R=%d, N=%f, scaler=%d, ext_div=%d\n") % R % N % scaler % ext_div + << boost::format(" int=%d, frac=%d, d24=%d\n") % intdiv % fracdiv % int(_max2112_write_regs.d24) + << boost::format(" Ref Freq=%fMHz\n") % (ref_freq/1e6) + << boost::format(" Target Freq=%fMHz\n") % (target_freq/1e6) + << boost::format(" Actual Freq=%fMHz\n") % (_lo_freq/1e6) + << std::endl; + + //send the registers + send_reg(0x0, 0x7); + + //FIXME: probably unnecessary to call get_locked here + //get_locked(); + +} + +/*********************************************************************** + * Gain Handling + **********************************************************************/ +/*! + * Convert a requested gain for the BBG vga into the integer register value. + * The gain passed into the function will be set to the actual value. + * \param gain the requested gain in dB + * \return 4 bit the register value + */ +static int gain_to_bbg_vga_reg(double &gain){ + int reg = boost::math::iround(dbsrx2_gain_ranges["BBG"].clip(gain)); + + gain = double(reg); + + if (dbsrx2_debug) std::cerr + << boost::format("DBSRX2 BBG Gain:\n") + << boost::format(" %f dB, bbg: %d") % gain % reg + << std::endl; + + return reg; +} + +/*! + * Convert a requested gain for the GC1 rf vga into the dac_volts value. + * The gain passed into the function will be set to the actual value. + * \param gain the requested gain in dB + * \return dac voltage value + */ +static double gain_to_gc1_rfvga_dac(double &gain){ + //clip the input + gain = dbsrx2_gain_ranges["GC1"].clip(gain); + + //voltage level constants + static const double max_volts = 0.5, min_volts = 2.7; + static const double slope = (max_volts-min_volts)/dbsrx2_gain_ranges["GC1"].stop(); + + //calculate the voltage for the aux dac + double dac_volts = gain*slope + min_volts; + + if (dbsrx2_debug) std::cerr + << boost::format("DBSRX2 GC1 Gain:\n") + << boost::format(" %f dB, dac_volts: %f V") % gain % dac_volts + << std::endl; + + //the actual gain setting + gain = (dac_volts - min_volts)/slope; + + return dac_volts; +} + +void dbsrx2::set_gain(double gain, const std::string &name){ + assert_has(dbsrx2_gain_ranges.keys(), name, "dbsrx2 gain name"); + if (name == "BBG"){ + _max2112_write_regs.bbg = gain_to_bbg_vga_reg(gain); + send_reg(0x9, 0x9); + } + else if(name == "GC1"){ + //write the new voltage to the aux dac + this->get_iface()->write_aux_dac(dboard_iface::UNIT_RX, dboard_iface::AUX_DAC_A, gain_to_gc1_rfvga_dac(gain)); + } + else UHD_THROW_INVALID_CODE_PATH(); + _gains[name] = gain; +} + +/*********************************************************************** + * Bandwidth Handling + **********************************************************************/ +void dbsrx2::set_bandwidth(double bandwidth){ + //clip the input + bandwidth = uhd::clip<double>(bandwidth, 4e6, 40e6); + + _max2112_write_regs.lp = int((bandwidth/1e6 - 4)/0.29 + 12); + _bandwidth = double(4 + (_max2112_write_regs.lp - 12) * 0.29)*1e6; + + if (dbsrx2_debug) std::cerr + << boost::format("DBSRX2 Bandwidth:\n") + << boost::format(" %f MHz, lp: %f V") % (_bandwidth/1e6) % int(_max2112_write_regs.lp) + << std::endl; + + this->send_reg(0x8, 0x8); +} + +/*********************************************************************** + * RX Get and Set + **********************************************************************/ +void dbsrx2::rx_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = get_rx_id().to_pp_string(); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + assert_has(_gains.keys(), key.name, "dbsrx2 gain name"); + val = _gains[key.name]; + return; + + case SUBDEV_PROP_GAIN_RANGE: + assert_has(dbsrx2_gain_ranges.keys(), key.name, "dbsrx2 gain name"); + val = dbsrx2_gain_ranges[key.name]; + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(dbsrx2_gain_ranges.keys()); + return; + + case SUBDEV_PROP_FREQ: + val = _lo_freq; + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = dbsrx2_freq_range; + return; + + case SUBDEV_PROP_ANTENNA: + val = std::string("J3"); + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = dbsrx2_antennas; + return; + + case SUBDEV_PROP_CONNECTION: + val = SUBDEV_CONN_COMPLEX_QI; + return; + + case SUBDEV_PROP_ENABLED: + val = true; //always enabled + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_SENSOR: + UHD_ASSERT_THROW(key.name == "lo_locked"); + val = sensor_value_t("LO", this->get_locked(), "locked", "unlocked"); + return; + + case SUBDEV_PROP_SENSOR_NAMES: + val = prop_names_t(1, "lo_locked"); + return; + + case SUBDEV_PROP_BANDWIDTH: + val = _bandwidth; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void dbsrx2::rx_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + this->set_lo_freq(val.as<double>()); + return; + + case SUBDEV_PROP_GAIN: + this->set_gain(val.as<double>(), key.name); + return; + + case SUBDEV_PROP_ENABLED: + return; //always enabled + + case SUBDEV_PROP_BANDWIDTH: + this->set_bandwidth(val.as<double>()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + diff --git a/host/lib/usrp/dboard/db_rfx.cpp b/host/lib/usrp/dboard/db_rfx.cpp new file mode 100644 index 000000000..4d8222a52 --- /dev/null +++ b/host/lib/usrp/dboard/db_rfx.cpp @@ -0,0 +1,601 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +// IO Pin functions +#define POWER_IO (1 << 7) // Low enables power supply +#define ANTSW_IO (1 << 6) // On TX DB, 0 = TX, 1 = RX, on RX DB 0 = main ant, 1 = RX2 +#define MIXER_IO (1 << 5) // Enable appropriate mixer +#define LOCKDET_MASK (1 << 2) // Input pin + +// Mixer constants +#define MIXER_ENB MIXER_IO +#define MIXER_DIS 0 + +// Antenna constants +#define ANT_TX 0 //the tx line is transmitting +#define ANT_RX ANTSW_IO //the tx line is receiving +#define ANT_TXRX 0 //the rx line is on txrx +#define ANT_RX2 ANTSW_IO //the rx line in on rx2 +#define ANT_XX 0 //dont care how the antenna is set + +#include "adf4360_regs.hpp" +#include <uhd/types/dict.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/types/ranges.hpp> +#include <uhd/types/sensors.hpp> +#include <uhd/utils/assert_has.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/utils/algorithm.hpp> +#include <uhd/utils/warning.hpp> +#include <uhd/usrp/dboard_id.hpp> +#include <uhd/usrp/dboard_base.hpp> +#include <uhd/usrp/dboard_manager.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/format.hpp> +#include <boost/math/special_functions/round.hpp> + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +/*********************************************************************** + * The RFX Series constants + **********************************************************************/ +static const bool rfx_debug = false; + +static const prop_names_t rfx_tx_antennas = list_of("TX/RX"); + +static const prop_names_t rfx_rx_antennas = list_of("TX/RX")("RX2"); + +static const uhd::dict<std::string, gain_range_t> rfx_tx_gain_ranges; //empty + +static const uhd::dict<std::string, gain_range_t> rfx_rx_gain_ranges = map_list_of + ("PGA0", gain_range_t(0, 70, 0.022)) +; + +static const uhd::dict<std::string, gain_range_t> rfx400_rx_gain_ranges = map_list_of + ("PGA0", gain_range_t(0, 45, 0.022)) +; + +/*********************************************************************** + * The RFX series of dboards + **********************************************************************/ +class rfx_xcvr : public xcvr_dboard_base{ +public: + rfx_xcvr( + ctor_args_t args, + const freq_range_t &freq_range, + bool rx_div2, bool tx_div2 + ); + ~rfx_xcvr(void); + + void rx_get(const wax::obj &key, wax::obj &val); + void rx_set(const wax::obj &key, const wax::obj &val); + + void tx_get(const wax::obj &key, wax::obj &val); + void tx_set(const wax::obj &key, const wax::obj &val); + +private: + const freq_range_t _freq_range; + const uhd::dict<std::string, gain_range_t> _rx_gain_ranges; + const uhd::dict<dboard_iface::unit_t, bool> _div2; + double _rx_lo_freq, _tx_lo_freq; + std::string _rx_ant; + uhd::dict<std::string, double> _rx_gains; + boost::uint16_t _power_up; + + void set_rx_lo_freq(double freq); + void set_tx_lo_freq(double freq); + void set_rx_ant(const std::string &ant); + void set_tx_ant(const std::string &ant); + void set_rx_gain(double gain, const std::string &name); + void set_tx_gain(double gain, const std::string &name); + + /*! + * Set the LO frequency for the particular dboard unit. + * \param unit which unit rx or tx + * \param target_freq the desired frequency in Hz + * \return the actual frequency in Hz + */ + double set_lo_freq(dboard_iface::unit_t unit, double target_freq); + + /*! + * Get the lock detect status of the LO. + * \param unit which unit rx or tx + * \return true for locked + */ + bool get_locked(dboard_iface::unit_t unit){ + return (this->get_iface()->read_gpio(unit) & LOCKDET_MASK) != 0; + } +}; + +/*********************************************************************** + * Register the RFX dboards (min freq, max freq, rx div2, tx div2) + **********************************************************************/ +static dboard_base::sptr make_rfx_flex400(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new rfx_xcvr(args, freq_range_t(400e6, 500e6), true, true)); +} + +static dboard_base::sptr make_rfx_flex900(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new rfx_xcvr(args, freq_range_t(750e6, 1050e6), true, true)); +} + +static dboard_base::sptr make_rfx_flex1800(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new rfx_xcvr(args, freq_range_t(1500e6, 2100e6), false, false)); +} + +static dboard_base::sptr make_rfx_flex1200(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new rfx_xcvr(args, freq_range_t(1150e6, 1450e6), true, true)); +} + +static dboard_base::sptr make_rfx_flex2200(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new rfx_xcvr(args, freq_range_t(2000e6, 2400e6), false, false)); +} + +static dboard_base::sptr make_rfx_flex2400(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new rfx_xcvr(args, freq_range_t(2300e6, 2900e6), false, false)); +} + +UHD_STATIC_BLOCK(reg_rfx_dboards){ + dboard_manager::register_dboard(0x0024, 0x0028, &make_rfx_flex400, "RFX400"); + dboard_manager::register_dboard(0x0025, 0x0029, &make_rfx_flex900, "RFX900"); + dboard_manager::register_dboard(0x0034, 0x0035, &make_rfx_flex1800, "RFX1800"); + dboard_manager::register_dboard(0x0026, 0x002a, &make_rfx_flex1200, "RFX1200"); + dboard_manager::register_dboard(0x002c, 0x002d, &make_rfx_flex2200, "RFX2200"); + dboard_manager::register_dboard(0x0027, 0x002b, &make_rfx_flex2400, "RFX2400"); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +rfx_xcvr::rfx_xcvr( + ctor_args_t args, + const freq_range_t &freq_range, + bool rx_div2, bool tx_div2 +): + xcvr_dboard_base(args), + _freq_range(freq_range), + _rx_gain_ranges((get_rx_id() == 0x0024)? + rfx400_rx_gain_ranges : rfx_rx_gain_ranges + ), + _div2(map_list_of + (dboard_iface::UNIT_RX, rx_div2) + (dboard_iface::UNIT_TX, tx_div2) + ), + _power_up((get_rx_id() == 0x0024 && get_tx_id() == 0x0028) ? POWER_IO : 0) +{ + //enable the clocks that we need + this->get_iface()->set_clock_enabled(dboard_iface::UNIT_TX, true); + this->get_iface()->set_clock_enabled(dboard_iface::UNIT_RX, true); + + //set the gpio directions and atr controls (identically) + boost::uint16_t output_enables = POWER_IO | ANTSW_IO | MIXER_IO; + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_TX, output_enables); + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, output_enables); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, output_enables); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, output_enables); + + //setup the tx atr (this does not change with antenna) + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, _power_up | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, _power_up | ANT_RX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_TX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB); + + //setup the rx atr (this does not change with antenna) + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, _power_up | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB); + + //set some default values + set_rx_lo_freq((_freq_range.start() + _freq_range.stop())/2.0); + set_tx_lo_freq((_freq_range.start() + _freq_range.stop())/2.0); + set_rx_ant("RX2"); + + BOOST_FOREACH(const std::string &name, _rx_gain_ranges.keys()){ + set_rx_gain(_rx_gain_ranges[name].start(), name); + } +} + +rfx_xcvr::~rfx_xcvr(void){ + /* NOP */ +} + +/*********************************************************************** + * Antenna Handling + **********************************************************************/ +void rfx_xcvr::set_rx_ant(const std::string &ant){ + //validate input + assert_has(rfx_rx_antennas, ant, "rfx rx antenna name"); + + //set the rx atr regs that change with antenna setting + this->get_iface()->set_atr_reg( + dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, + _power_up | MIXER_ENB | ((ant == "TX/RX")? ANT_TXRX : ANT_RX2) + ); + + //shadow the setting + _rx_ant = ant; +} + +void rfx_xcvr::set_tx_ant(const std::string &ant){ + assert_has(rfx_tx_antennas, ant, "rfx tx antenna name"); + //only one antenna option, do nothing +} + +/*********************************************************************** + * Gain Handling + **********************************************************************/ +static double rx_pga0_gain_to_dac_volts(double &gain, double range){ + //voltage level constants (negative slope) + static const double max_volts = .2, min_volts = 1.2; + static const double slope = (max_volts-min_volts)/(range); + + //calculate the voltage for the aux dac + double dac_volts = uhd::clip<double>(gain*slope + min_volts, max_volts, min_volts); + + //the actual gain setting + gain = (dac_volts - min_volts)/slope; + + return dac_volts; +} + +void rfx_xcvr::set_tx_gain(double, const std::string &name){ + assert_has(rfx_tx_gain_ranges.keys(), name, "rfx tx gain name"); + UHD_THROW_INVALID_CODE_PATH(); //no gains to set +} + +void rfx_xcvr::set_rx_gain(double gain, const std::string &name){ + assert_has(_rx_gain_ranges.keys(), name, "rfx rx gain name"); + if(name == "PGA0"){ + double dac_volts = rx_pga0_gain_to_dac_volts(gain, + (_rx_gain_ranges["PGA0"].stop() - _rx_gain_ranges["PGA0"].start())); + _rx_gains[name] = gain; + + //write the new voltage to the aux dac + this->get_iface()->write_aux_dac(dboard_iface::UNIT_RX, dboard_iface::AUX_DAC_A, dac_volts); + } + else UHD_THROW_INVALID_CODE_PATH(); +} + +/*********************************************************************** + * Tuning + **********************************************************************/ +void rfx_xcvr::set_rx_lo_freq(double freq){ + _rx_lo_freq = set_lo_freq(dboard_iface::UNIT_RX, freq); +} + +void rfx_xcvr::set_tx_lo_freq(double freq){ + _tx_lo_freq = set_lo_freq(dboard_iface::UNIT_TX, freq); +} + +double rfx_xcvr::set_lo_freq( + dboard_iface::unit_t unit, + double target_freq +){ + if (rfx_debug) std::cerr << boost::format( + "RFX tune: target frequency %f Mhz" + ) % (target_freq/1e6) << std::endl; + + //clip the input + target_freq = _freq_range.clip(target_freq); + if (_div2[unit]) target_freq *= 2; + + //map prescalers to the register enums + static const uhd::dict<int, adf4360_regs_t::prescaler_value_t> prescaler_to_enum = map_list_of + (8, adf4360_regs_t::PRESCALER_VALUE_8_9) + (16, adf4360_regs_t::PRESCALER_VALUE_16_17) + (32, adf4360_regs_t::PRESCALER_VALUE_32_33) + ; + + //map band select clock dividers to enums + static const uhd::dict<int, adf4360_regs_t::band_select_clock_div_t> bandsel_to_enum = map_list_of + (1, adf4360_regs_t::BAND_SELECT_CLOCK_DIV_1) + (2, adf4360_regs_t::BAND_SELECT_CLOCK_DIV_2) + (4, adf4360_regs_t::BAND_SELECT_CLOCK_DIV_4) + (8, adf4360_regs_t::BAND_SELECT_CLOCK_DIV_8) + ; + + double actual_freq=0, ref_freq = this->get_iface()->get_clock_rate(unit); + int R=0, BS=0, P=0, B=0, A=0; + + /* + * The goal here to to loop though possible R dividers, + * band select clock dividers, and prescaler values. + * Calculate the A and B counters for each set of values. + * The loop exists when it meets all of the constraints. + * The resulting loop values are loaded into the registers. + * + * fvco = [P*B + A] * fref/R + * fvco*R/fref = P*B + A = N + */ + for(R = 2; R <= 32; R+=2){ + BOOST_FOREACH(BS, bandsel_to_enum.keys()){ + if (ref_freq/R/BS > 1e6) continue; //constraint on band select clock + BOOST_FOREACH(P, prescaler_to_enum.keys()){ + //calculate B and A from N + double N = target_freq*R/ref_freq; + B = int(std::floor(N/P)); + A = boost::math::iround(N - P*B); + if (B < A or B > 8191 or B < 3 or A > 31) continue; //constraints on A, B + //calculate the actual frequency + actual_freq = double(P*B + A)*ref_freq/R; + if (actual_freq/P > 300e6) continue; //constraint on prescaler output + //constraints met: exit loop + goto done_loop; + } + } + } done_loop: + + if (rfx_debug) std::cerr << boost::format( + "RFX tune: R=%d, BS=%d, P=%d, B=%d, A=%d" + ) % R % BS % P % B % A << std::endl; + + //load the register values + adf4360_regs_t regs; + regs.core_power_level = adf4360_regs_t::CORE_POWER_LEVEL_10MA; + regs.counter_operation = adf4360_regs_t::COUNTER_OPERATION_NORMAL; + regs.muxout_control = adf4360_regs_t::MUXOUT_CONTROL_DLD; + regs.phase_detector_polarity = adf4360_regs_t::PHASE_DETECTOR_POLARITY_POS; + regs.charge_pump_output = adf4360_regs_t::CHARGE_PUMP_OUTPUT_NORMAL; + regs.cp_gain_0 = adf4360_regs_t::CP_GAIN_0_SET1; + regs.mute_till_ld = adf4360_regs_t::MUTE_TILL_LD_ENB; + regs.output_power_level = adf4360_regs_t::OUTPUT_POWER_LEVEL_3_5MA; + regs.current_setting1 = adf4360_regs_t::CURRENT_SETTING1_0_31MA; + regs.current_setting2 = adf4360_regs_t::CURRENT_SETTING2_0_31MA; + regs.power_down = adf4360_regs_t::POWER_DOWN_NORMAL_OP; + regs.prescaler_value = prescaler_to_enum[P]; + regs.a_counter = A; + regs.b_counter = B; + regs.cp_gain_1 = adf4360_regs_t::CP_GAIN_1_SET1; + regs.divide_by_2_output = (_div2[unit] && (get_rx_id() != 0x0024)) ? // Special case RFX400 RX Mixer divides by two + adf4360_regs_t::DIVIDE_BY_2_OUTPUT_DIV2 : + adf4360_regs_t::DIVIDE_BY_2_OUTPUT_FUND ; + regs.divide_by_2_prescaler = adf4360_regs_t::DIVIDE_BY_2_PRESCALER_FUND; + regs.r_counter = R; + regs.ablpw = adf4360_regs_t::ABLPW_3_0NS; + regs.lock_detect_precision = adf4360_regs_t::LOCK_DETECT_PRECISION_5CYCLES; + regs.test_mode_bit = 0; + regs.band_select_clock_div = bandsel_to_enum[BS]; + + //write the registers + std::vector<adf4360_regs_t::addr_t> addrs = list_of //correct power-up sequence to write registers (R, C, N) + (adf4360_regs_t::ADDR_RCOUNTER) + (adf4360_regs_t::ADDR_CONTROL) + (adf4360_regs_t::ADDR_NCOUNTER) + ; + BOOST_FOREACH(adf4360_regs_t::addr_t addr, addrs){ + this->get_iface()->write_spi( + unit, spi_config_t::EDGE_RISE, + regs.get_reg(addr), 24 + ); + } + + //return the actual frequency + if (_div2[unit]) actual_freq /= 2; + if (rfx_debug) std::cerr << boost::format( + "RFX tune: actual frequency %f Mhz" + ) % (actual_freq/1e6) << std::endl; + return actual_freq; +} + +/*********************************************************************** + * RX Get and Set + **********************************************************************/ +void rfx_xcvr::rx_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = get_rx_id().to_pp_string(); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + assert_has(_rx_gains.keys(), key.name, "rfx rx gain name"); + val = _rx_gains[key.name]; + return; + + case SUBDEV_PROP_GAIN_RANGE: + assert_has(_rx_gain_ranges.keys(), key.name, "rfx rx gain name"); + val = _rx_gain_ranges[key.name]; + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(_rx_gain_ranges.keys()); + return; + + case SUBDEV_PROP_FREQ: + val = _rx_lo_freq; + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = _freq_range; + return; + + case SUBDEV_PROP_ANTENNA: + val = _rx_ant; + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = rfx_rx_antennas; + return; + + case SUBDEV_PROP_CONNECTION: + val = SUBDEV_CONN_COMPLEX_QI; + return; + + case SUBDEV_PROP_ENABLED: + val = true; //always enabled + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_SENSOR: + UHD_ASSERT_THROW(key.name == "lo_locked"); + val = sensor_value_t("LO", this->get_locked(dboard_iface::UNIT_RX), "locked", "unlocked"); + return; + + case SUBDEV_PROP_SENSOR_NAMES: + val = prop_names_t(1, "lo_locked"); + return; + + case SUBDEV_PROP_BANDWIDTH: + val = 2*20.0e6; //20MHz low-pass, we want complex double-sided + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void rfx_xcvr::rx_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + this->set_rx_lo_freq(val.as<double>()); + return; + + case SUBDEV_PROP_GAIN: + this->set_rx_gain(val.as<double>(), key.name); + return; + + case SUBDEV_PROP_ANTENNA: + this->set_rx_ant(val.as<std::string>()); + return; + + case SUBDEV_PROP_ENABLED: + return; //always enabled + + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("RFX: No tunable bandwidth, fixed filtered to 40MHz")) + ); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX Get and Set + **********************************************************************/ +void rfx_xcvr::tx_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = get_tx_id().to_pp_string(); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + case SUBDEV_PROP_GAIN_RANGE: + assert_has(rfx_tx_gain_ranges.keys(), key.name, "rfx tx gain name"); + //no controllable tx gains, will not get here + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(rfx_tx_gain_ranges.keys()); + return; + + case SUBDEV_PROP_FREQ: + val = _tx_lo_freq; + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = _freq_range; + return; + + case SUBDEV_PROP_ANTENNA: + val = std::string("TX/RX"); + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = rfx_tx_antennas; + return; + + case SUBDEV_PROP_CONNECTION: + val = SUBDEV_CONN_COMPLEX_IQ; + return; + + case SUBDEV_PROP_ENABLED: + val = true; //always enabled + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = true; + return; + + case SUBDEV_PROP_SENSOR: + UHD_ASSERT_THROW(key.name == "lo_locked"); + val = sensor_value_t("LO", this->get_locked(dboard_iface::UNIT_TX), "locked", "unlocked"); + return; + + case SUBDEV_PROP_SENSOR_NAMES: + val = prop_names_t(1, "lo_locked"); + return; + + case SUBDEV_PROP_BANDWIDTH: + val = 2*20.0e6; //20MHz low-pass, we want complex double-sided + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void rfx_xcvr::tx_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + this->set_tx_lo_freq(val.as<double>()); + return; + + case SUBDEV_PROP_GAIN: + this->set_tx_gain(val.as<double>(), key.name); + return; + + case SUBDEV_PROP_ANTENNA: + this->set_tx_ant(val.as<std::string>()); + return; + + case SUBDEV_PROP_ENABLED: + return; //always enabled + + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("RFX: No tunable bandwidth, fixed filtered to 40MHz")) + ); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/dboard/db_tvrx.cpp b/host/lib/usrp/dboard/db_tvrx.cpp new file mode 100644 index 000000000..d264c9ca4 --- /dev/null +++ b/host/lib/usrp/dboard/db_tvrx.cpp @@ -0,0 +1,500 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +// No RX IO Pins Used + +// RX IO Functions + +//ADC/DAC functions: +//DAC 1: RF AGC +//DAC 2: IF AGC + +//min freq: 50e6 +//max freq: 860e6 +//gain range: [0:1dB:115dB] + +#include <uhd/utils/static.hpp> +#include <uhd/utils/assert_has.hpp> +#include <uhd/utils/algorithm.hpp> +#include <uhd/utils/warning.hpp> +#include <uhd/types/ranges.hpp> +#include <uhd/types/sensors.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/usrp/dboard_base.hpp> +#include <uhd/usrp/dboard_manager.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <boost/array.hpp> +#include <boost/math/special_functions/round.hpp> +#include <utility> +#include <cmath> +#include <cfloat> +#include <limits> +#include <tuner_4937di5_regs.hpp> + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +/*********************************************************************** + * The tvrx constants + **********************************************************************/ +static const bool tvrx_debug = false; + +static const freq_range_t tvrx_freq_range(50e6, 860e6); + +static const prop_names_t tvrx_antennas = list_of("RX"); + +static const uhd::dict<std::string, freq_range_t> tvrx_freq_ranges = map_list_of + ("VHFLO", freq_range_t(50e6, 158e6)) + ("VHFHI", freq_range_t(158e6, 454e6)) + ("UHF" , freq_range_t(454e6, 860e6)) +; + +static const boost::array<double, 17> vhflo_gains_db = + {{-6.00000, -6.00000, -6.00000, -4.00000, 0.00000, + 5.00000, 10.00000, 17.40000, 26.30000, 36.00000, + 43.00000, 48.00000, 49.50000, 50.10000, 50.30000, + 50.30000, 50.30000}}; + +static const boost::array<double, 17> vhfhi_gains_db = + {{-13.3000, -13.3000, -13.3000, -1.0000, 7.7000, + 11.0000, 14.7000, 19.3000, 26.1000, 36.0000, + 42.7000, 46.0000, 47.0000, 47.8000, 48.2000, + 48.2000, 48.2000}}; + +static const boost::array<double, 17> uhf_gains_db = + {{-8.0000, -8.0000, -7.0000, 4.0000, 10.2000, + 14.5000, 17.5000, 20.0000, 24.5000, 30.8000, + 37.0000, 39.8000, 40.7000, 41.6000, 42.6000, + 43.2000, 43.8000}}; + +static const boost::array<double, 17> tvrx_if_gains_db = + {{-1.50000, -1.50000, -1.50000, -1.00000, 0.20000, + 2.10000, 4.30000, 6.40000, 9.00000, 12.00000, + 14.80000, 18.20000, 26.10000, 32.50000, 32.50000, + 32.50000, 32.50000}}; + +//gain linearization data +//this is from the datasheet and is dB vs. volts (below) +//i tried to curve fit this, but it's really just so nonlinear that you'd +//need dang near as many coefficients as to just map it like this and interp. +//these numbers are culled from the 4937DI5 datasheet and are probably totally inaccurate +//but if it's better than the old linear fit i'm happy +static const uhd::dict<std::string, boost::array<double, 17> > tvrx_rf_gains_db = map_list_of + ("VHFLO", vhflo_gains_db) + ("VHFHI", vhfhi_gains_db) + ("UHF" , uhf_gains_db) +; + +//sample voltages for the above points +static const boost::array<double, 17> tvrx_gains_volts = + {{0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2, 2.4, 2.6, 2.8, 3.0, 3.2, 3.4, 3.6, 3.8, 4.0}}; + +static uhd::dict<std::string, gain_range_t> get_tvrx_gain_ranges(void) { + double rfmax = 0.0, rfmin = FLT_MAX; + BOOST_FOREACH(const std::string range, tvrx_rf_gains_db.keys()) { + double my_max = tvrx_rf_gains_db[range].back(); //we're assuming it's monotonic + double my_min = tvrx_rf_gains_db[range].front(); //if it's not this is wrong wrong wrong + if(my_max > rfmax) rfmax = my_max; + if(my_min < rfmin) rfmin = my_min; + } + + double ifmin = tvrx_if_gains_db.front(); + double ifmax = tvrx_if_gains_db.back(); + + return map_list_of + ("RF", gain_range_t(rfmin, rfmax, (rfmax-rfmin)/4096.0)) + ("IF", gain_range_t(ifmin, ifmax, (ifmax-ifmin)/4096.0)) + ; +} + +static const double opamp_gain = 1.22; //onboard DAC opamp gain +static const double tvrx_if_freq = 43.75e6; //IF freq of TVRX module +static const boost::uint16_t reference_divider = 640; //clock reference divider to use +static const double reference_freq = 4.0e6; + +/*********************************************************************** + * The tvrx dboard class + **********************************************************************/ +class tvrx : public rx_dboard_base{ +public: + tvrx(ctor_args_t args); + ~tvrx(void); + + void rx_get(const wax::obj &key, wax::obj &val); + void rx_set(const wax::obj &key, const wax::obj &val); + +private: + uhd::dict<std::string, double> _gains; + double _lo_freq; + tuner_4937di5_regs_t _tuner_4937di5_regs; + boost::uint8_t _tuner_4937di5_addr(void){ + return (this->get_iface()->get_special_props().mangle_i2c_addrs)? 0x61 : 0x60; //ok really? we could rename that call + }; + + void set_gain(double gain, const std::string &name); + void set_freq(double freq); + + void update_regs(void){ + byte_vector_t regs_vector(4); + + //get the register data + for(int i=0; i<4; i++){ + regs_vector[i] = _tuner_4937di5_regs.get_reg(i); + if(tvrx_debug) std::cerr << boost::format( + "tvrx: send reg 0x%02x, value 0x%04x" + ) % int(i) % int(regs_vector[i]) << std::endl; + } + + //send the data + this->get_iface()->write_i2c( + _tuner_4937di5_addr(), regs_vector + ); + } + +}; + +/*********************************************************************** + * Register the tvrx dboard + **********************************************************************/ +static dboard_base::sptr make_tvrx(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new tvrx(args)); +} + +UHD_STATIC_BLOCK(reg_tvrx_dboard){ + //register the factory function for the rx dbid + dboard_manager::register_dboard(0x0040, &make_tvrx, "TVRX"); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +tvrx::tvrx(ctor_args_t args) : rx_dboard_base(args){ + this->get_iface()->set_clock_enabled(dboard_iface::UNIT_RX, true); + + //set the gpio directions and atr controls (identically) + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, 0x0); // All unused in atr + if (this->get_iface()->get_special_props().soft_clock_divider){ + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, 0x1); // GPIO0 is clock + } + else{ + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, 0x0); // All Inputs + } + + //send initial register settings if necessary + + //set default freq + _lo_freq = tvrx_freq_range.start() + tvrx_if_freq; //init _lo_freq to a sane default + set_freq(tvrx_freq_range.start()); + + //set default gains + BOOST_FOREACH(const std::string &name, get_tvrx_gain_ranges().keys()){ + set_gain(get_tvrx_gain_ranges()[name].start(), name); + } +} + +tvrx::~tvrx(void){ +} + +/*! Return a string corresponding to the relevant band + * \param freq the frequency of interest + * \return a string corresponding to the band + */ + +static std::string get_band(double freq) { + BOOST_FOREACH(const std::string &band, tvrx_freq_ranges.keys()) { + if(freq >= tvrx_freq_ranges[band].start() && freq <= tvrx_freq_ranges[band].stop()){ + if(tvrx_debug) std::cout << "Band: " << band << std::endl; + return band; + } + } + UHD_THROW_INVALID_CODE_PATH(); +} + +/*********************************************************************** + * Gain Handling + **********************************************************************/ +/*! + * Execute a linear interpolation to find the voltage corresponding to a desired gain + * \param gain the desired gain in dB + * \param db_vector the vector of dB readings + * \param volts_vector the corresponding vector of voltages db_vector was sampled at + * \return a voltage to feed the TVRX analog gain + */ + +static double gain_interp(double gain, boost::array<double, 17> db_vector, boost::array<double, 17> volts_vector) { + double volts; + gain = uhd::clip<double>(gain, db_vector.front(), db_vector.back()); //let's not get carried away here + + boost::uint8_t gain_step = 0; + //find which bin we're in + for(size_t i = 0; i < db_vector.size()-1; i++) { + if(gain >= db_vector[i] && gain <= db_vector[i+1]) gain_step = i; + } + + //find the current slope for linear interpolation + double slope = (volts_vector[gain_step + 1] - volts_vector[gain_step]) + / (db_vector[gain_step + 1] - db_vector[gain_step]); + + //the problem here is that for gains approaching the maximum, the voltage slope becomes infinite + //i.e., a small change in gain requires an infinite change in voltage + //to cope, we limit the slope + + if(slope == std::numeric_limits<double>::infinity()) + return volts_vector[gain_step]; + + //use the volts per dB slope to find the final interpolated voltage + volts = volts_vector[gain_step] + (slope * (gain - db_vector[gain_step])); + + if(tvrx_debug) + std::cout << "Gain interp: gain: " << gain << ", gain_step: " << int(gain_step) << ", slope: " << slope << ", volts: " << volts << std::endl; + + return volts; +} + +/*! + * Convert a requested gain for the RF gain into a DAC voltage. + * The gain passed into the function will be set to the actual value. + * \param gain the requested gain in dB + * \return dac voltage value + */ + +static double rf_gain_to_voltage(double gain, double lo_freq){ + //clip the input + gain = get_tvrx_gain_ranges()["RF"].clip(gain); + + //first we need to find out what band we're in, because gains are different across different bands + std::string band = get_band(lo_freq - tvrx_if_freq); + + //this is the voltage at the TVRX gain input + double gain_volts = gain_interp(gain, tvrx_rf_gains_db[band], tvrx_gains_volts); + //this is the voltage at the USRP DAC output + double dac_volts = gain_volts / opamp_gain; + + dac_volts = uhd::clip<double>(dac_volts, 0.0, 3.3); + + if (tvrx_debug) std::cerr << boost::format( + "tvrx RF AGC gain: %f dB, dac_volts: %f V" + ) % gain % dac_volts << std::endl; + + return dac_volts; +} + +/*! + * Convert a requested gain for the IF gain into a DAC voltage. + * The gain passed into the function will be set to the actual value. + * \param gain the requested gain in dB + * \return dac voltage value + */ + +static double if_gain_to_voltage(double gain){ + //clip the input + gain = get_tvrx_gain_ranges()["IF"].clip(gain); + + double gain_volts = gain_interp(gain, tvrx_if_gains_db, tvrx_gains_volts); + double dac_volts = gain_volts / opamp_gain; + + dac_volts = uhd::clip<double>(dac_volts, 0.0, 3.3); + + if (tvrx_debug) std::cerr << boost::format( + "tvrx IF AGC gain: %f dB, dac_volts: %f V" + ) % gain % dac_volts << std::endl; + + return dac_volts; +} + +void tvrx::set_gain(double gain, const std::string &name){ + assert_has(get_tvrx_gain_ranges().keys(), name, "tvrx gain name"); + if (name == "RF"){ + this->get_iface()->write_aux_dac(dboard_iface::UNIT_RX, dboard_iface::AUX_DAC_B, rf_gain_to_voltage(gain, _lo_freq)); + } + else if(name == "IF"){ + this->get_iface()->write_aux_dac(dboard_iface::UNIT_RX, dboard_iface::AUX_DAC_A, if_gain_to_voltage(gain)); + } + else UHD_THROW_INVALID_CODE_PATH(); + _gains[name] = gain; +} + +/*! + * Set the tuner to center the desired frequency at 43.75MHz + * \param freq the requested frequency + */ + +void tvrx::set_freq(double freq) { + freq = tvrx_freq_range.clip(freq); + std::string prev_band = get_band(_lo_freq - tvrx_if_freq); + std::string new_band = get_band(freq); + + double target_lo_freq = freq + tvrx_if_freq; //the desired LO freq for high-side mixing + double f_ref = reference_freq / double(reference_divider); //your tuning step size + + int divisor = int((target_lo_freq + (f_ref * 4.0)) / (f_ref * 8)); //the divisor we'll use + double actual_lo_freq = (f_ref * 8 * divisor); //the LO freq we'll actually get + + if((divisor & ~0x7fff)) UHD_THROW_INVALID_CODE_PATH(); + + //now we update the registers + _tuner_4937di5_regs.db1 = (divisor >> 8) & 0xff; + _tuner_4937di5_regs.db2 = divisor & 0xff; + + if(new_band == "VHFLO") _tuner_4937di5_regs.bandsel = tuner_4937di5_regs_t::BANDSEL_VHFLO; + else if(new_band == "VHFHI") _tuner_4937di5_regs.bandsel = tuner_4937di5_regs_t::BANDSEL_VHFHI; + else if(new_band == "UHF") _tuner_4937di5_regs.bandsel = tuner_4937di5_regs_t::BANDSEL_UHF; + else UHD_THROW_INVALID_CODE_PATH(); + + _tuner_4937di5_regs.power = tuner_4937di5_regs_t::POWER_OFF; + update_regs(); + + //ok don't forget to reset RF gain here if the new band != the old band + //we do this because the gains are different for different band settings + //not FAR off, but we do this to be consistent + if(prev_band != new_band) set_gain(_gains["RF"], "RF"); + + if(tvrx_debug) + std::cout << boost::format("set_freq: target LO: %f f_ref: %f divisor: %i actual LO: %f") % target_lo_freq % f_ref % divisor % actual_lo_freq << std::endl; + + _lo_freq = actual_lo_freq; //for rx props +} + +/*********************************************************************** + * Get the alias frequency of frequency freq when sampled at fs. + * \param freq the frequency of interest + * \param fs the sample rate + * \return the alias frequency + **********************************************************************/ + +static double get_alias(double freq, double fs) { + double alias; + freq = fmod(freq, fs); + if(freq >= (fs/2)) { + alias = freq - fs; + } else { + alias = freq; + } + return alias; +} + +/*********************************************************************** + * RX Get and Set + **********************************************************************/ +void tvrx::rx_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + double codec_rate; + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = get_rx_id().to_pp_string(); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + assert_has(_gains.keys(), key.name, "tvrx gain name"); + val = _gains[key.name]; + return; + + case SUBDEV_PROP_GAIN_RANGE: + assert_has(get_tvrx_gain_ranges().keys(), key.name, "tvrx gain name"); + val = get_tvrx_gain_ranges()[key.name]; + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(get_tvrx_gain_ranges().keys()); + return; + + case SUBDEV_PROP_FREQ: + /* + * so here we have to do some magic. because the TVRX uses a relatively high IF, + * we have to watch the sample rate to see if the IF will be aliased + * or if it will fall within Nyquist. + */ + codec_rate = this->get_iface()->get_codec_rate(dboard_iface::UNIT_RX); + val = (_lo_freq - tvrx_if_freq) + get_alias(tvrx_if_freq, codec_rate); + if(tvrx_debug) { + std::cout << "Getting TVRX freq..." << std::endl; + std::cout << "\tCodec rate: " << codec_rate << std::endl; + std::cout << "\tLO freq: " << _lo_freq << std::endl; + std::cout << "\tIF freq: " << tvrx_if_freq << std::endl; + std::cout << "\tAlias freq: " << get_alias(tvrx_if_freq, codec_rate) << std::endl; + std::cout << "\tCalculated freq: " << val.as<double>() << std::endl; + } + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = tvrx_freq_range; + return; + + case SUBDEV_PROP_ANTENNA: + val = tvrx_antennas.front(); //there's only one + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = tvrx_antennas; + return; + + case SUBDEV_PROP_CONNECTION: + val = SUBDEV_CONN_REAL_I; + return; + + case SUBDEV_PROP_ENABLED: + val = true; //always enabled + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_BANDWIDTH: + val = 6.0e6; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void tvrx::rx_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_GAIN: + this->set_gain(val.as<double>(), key.name); + return; + + case SUBDEV_PROP_FREQ: + this->set_freq(val.as<double>()); + return; + + case SUBDEV_PROP_ENABLED: + return; //always enabled + + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("TVRX: No tunable bandwidth, fixed filtered to 6MHz")) + ); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + diff --git a/host/lib/usrp/dboard/db_unknown.cpp b/host/lib/usrp/dboard/db_unknown.cpp new file mode 100644 index 000000000..cef4bee4a --- /dev/null +++ b/host/lib/usrp/dboard/db_unknown.cpp @@ -0,0 +1,291 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/types/ranges.hpp> +#include <uhd/utils/assert_has.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/utils/warning.hpp> +#include <uhd/usrp/dboard_base.hpp> +#include <uhd/usrp/dboard_manager.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/format.hpp> +#include <boost/foreach.hpp> +#include <boost/tuple/tuple.hpp> +#include <vector> + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +/*********************************************************************** + * Utility functions + **********************************************************************/ +static void warn_if_old_rfx(const dboard_id_t &dboard_id, const std::string &xx){ + typedef boost::tuple<std::string, dboard_id_t, dboard_id_t> old_ids_t; //name, rx_id, tx_id + static const std::vector<old_ids_t> old_rfx_ids = list_of + (old_ids_t("Flex 400 Classic", 0x0004, 0x0008)) + (old_ids_t("Flex 900 Classic", 0x0005, 0x0009)) + (old_ids_t("Flex 1200 Classic", 0x0006, 0x000a)) + (old_ids_t("Flex 1800 Classic", 0x0030, 0x0031)) + (old_ids_t("Flex 2400 Classic", 0x0007, 0x000b)) + ; + BOOST_FOREACH(const old_ids_t &old_id, old_rfx_ids){ + std::string name; dboard_id_t rx_id, tx_id; + boost::tie(name, rx_id, tx_id) = old_id; + if ( + (xx == "RX" and rx_id == dboard_id) or + (xx == "TX" and tx_id == dboard_id) + ) uhd::warning::post(str(boost::format( + "Detected %s daughterboard %s\n" + "This board requires modification to use.\n" + "See the daughterboard application notes.\n" + ) % xx % name)); + } +} + +/*********************************************************************** + * The unknown boards: + * Like a basic board, but with only one subdev. + **********************************************************************/ +class unknown_rx : public rx_dboard_base{ +public: + unknown_rx(ctor_args_t args); + + void rx_get(const wax::obj &key, wax::obj &val); + void rx_set(const wax::obj &key, const wax::obj &val); +}; + +class unknown_tx : public tx_dboard_base{ +public: + unknown_tx(ctor_args_t args); + + void tx_get(const wax::obj &key, wax::obj &val); + void tx_set(const wax::obj &key, const wax::obj &val); +}; + +/*********************************************************************** + * Register the unknown dboards + **********************************************************************/ +static dboard_base::sptr make_unknown_rx(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new unknown_rx(args)); +} + +static dboard_base::sptr make_unknown_tx(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new unknown_tx(args)); +} + +UHD_STATIC_BLOCK(reg_unknown_dboards){ + dboard_manager::register_dboard(0xfff0, &make_unknown_tx, "Unknown TX"); + dboard_manager::register_dboard(0xfff1, &make_unknown_rx, "Unknown RX"); +} + +/*********************************************************************** + * Unknown RX dboard + **********************************************************************/ +unknown_rx::unknown_rx(ctor_args_t args) : rx_dboard_base(args){ + warn_if_old_rfx(this->get_rx_id(), "RX"); +} + +void unknown_rx::rx_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = "Unknown - " + get_rx_id().to_pp_string(); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + val = double(0); + return; + + case SUBDEV_PROP_GAIN_RANGE: + val = gain_range_t(0, 0, 0); + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_FREQ: + val = double(0); + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = freq_range_t(0.0, 0.0); + return; + + case SUBDEV_PROP_ANTENNA: + val = std::string(""); + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = prop_names_t(1, ""); //vector of 1 empty string + return; + + case SUBDEV_PROP_CONNECTION: + val = SUBDEV_CONN_COMPLEX_IQ; + return; + + case SUBDEV_PROP_ENABLED: + val = true; //always enabled + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_BANDWIDTH: + val = 0.0; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void unknown_rx::rx_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_GAIN: + UHD_ASSERT_THROW(val.as<double>() == double(0)); + return; + + case SUBDEV_PROP_ANTENNA: + UHD_ASSERT_THROW(val.as<std::string>() == std::string("")); + return; + + case SUBDEV_PROP_FREQ: + return; // it wont do you much good, but you can set it + + case SUBDEV_PROP_ENABLED: + return; //always enabled + + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("Unknown Daughterboard: No tunable bandwidth, fixed filtered to 0.0MHz")) + ); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * Unknown TX dboard + **********************************************************************/ +unknown_tx::unknown_tx(ctor_args_t args) : tx_dboard_base(args){ + warn_if_old_rfx(this->get_tx_id(), "TX"); +} + +void unknown_tx::tx_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = "Unknown - " + get_tx_id().to_pp_string(); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + val = double(0); + return; + + case SUBDEV_PROP_GAIN_RANGE: + val = gain_range_t(0, 0, 0); + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_FREQ: + val = double(0); + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = freq_range_t(0.0, 0.0); + return; + + case SUBDEV_PROP_ANTENNA: + val = std::string(""); + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = prop_names_t(1, ""); //vector of 1 empty string + return; + + case SUBDEV_PROP_CONNECTION: + val = SUBDEV_CONN_COMPLEX_IQ; + return; + + case SUBDEV_PROP_ENABLED: + val = true; //always enabled + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_BANDWIDTH: + val = 0.0; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void unknown_tx::tx_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_GAIN: + UHD_ASSERT_THROW(val.as<double>() == double(0)); + return; + + case SUBDEV_PROP_ANTENNA: + UHD_ASSERT_THROW(val.as<std::string>() == std::string("")); + return; + + case SUBDEV_PROP_FREQ: + return; // it wont do you much good, but you can set it + + case SUBDEV_PROP_ENABLED: + return; //always enabled + + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("Unknown Daughterboard: No tunable bandwidth, fixed filtered to 0.0MHz")) + ); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/dboard/db_wbx.cpp b/host/lib/usrp/dboard/db_wbx.cpp new file mode 100644 index 000000000..2e9a1edc8 --- /dev/null +++ b/host/lib/usrp/dboard/db_wbx.cpp @@ -0,0 +1,677 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +// Common IO Pins +#define ANTSW_IO ((1 << 5)|(1 << 15)) // on UNIT_TX, 0 = TX, 1 = RX, on UNIT_RX 0 = main ant, 1 = RX2 +#define ADF4350_CE (1 << 3) +#define ADF4350_PDBRF (1 << 2) +#define ADF4350_MUXOUT (1 << 1) // INPUT!!! +#define LOCKDET_MASK (1 << 0) // INPUT!!! + +// TX IO Pins +#define TX_PUP_5V (1 << 7) // enables 5.0V power supply +#define TX_PUP_3V (1 << 6) // enables 3.3V supply +#define TXMOD_EN (1 << 4) // on UNIT_TX, 1 enables TX Modulator + +// RX IO Pins +#define RX_PUP_5V (1 << 7) // enables 5.0V power supply +#define RX_PUP_3V (1 << 6) // enables 3.3V supply +#define RXBB_PDB (1 << 4) // on UNIT_RX, 1 powers up RX baseband + +// RX Attenuator Pins +#define RX_ATTN_SHIFT 8 // lsb of RX Attenuator Control +#define RX_ATTN_MASK (63 << RX_ATTN_SHIFT) // valid bits of RX Attenuator Control + +// Mixer functions +#define TX_MIXER_ENB (TXMOD_EN|ADF4350_PDBRF) +#define TX_MIXER_DIS 0 + +#define RX_MIXER_ENB (RXBB_PDB|ADF4350_PDBRF) +#define RX_MIXER_DIS 0 + +// Pin functions +#define TX_POWER_IO (TX_PUP_5V|TX_PUP_3V) // high enables power supply +#define TXIO_MASK (TX_POWER_IO|ANTSW_IO|ADF4350_CE|ADF4350_PDBRF|TXMOD_EN) + +#define RX_POWER_IO (RX_PUP_5V|RX_PUP_3V) // high enables power supply +#define RXIO_MASK (RX_POWER_IO|ANTSW_IO|ADF4350_CE|ADF4350_PDBRF|RXBB_PDB|RX_ATTN_MASK) + +// Power functions +#define TX_POWER_UP (TX_POWER_IO|ADF4350_CE) +#define TX_POWER_DOWN 0 + +#define RX_POWER_UP (RX_POWER_IO|ADF4350_CE) +#define RX_POWER_DOWN 0 + +// Antenna constants +#define ANT_TX 0 //the tx line is transmitting +#define ANT_RX ANTSW_IO //the tx line is receiving +#define ANT_TXRX 0 //the rx line is on txrx +#define ANT_RX2 ANTSW_IO //the rx line in on rx2 +#define ANT_XX 0 //dont care how the antenna is set + +#include "adf4350_regs.hpp" +#include <uhd/types/dict.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/types/ranges.hpp> +#include <uhd/types/sensors.hpp> +#include <uhd/utils/assert_has.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/utils/algorithm.hpp> +#include <uhd/utils/warning.hpp> +#include <uhd/usrp/dboard_base.hpp> +#include <uhd/usrp/dboard_manager.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/format.hpp> +#include <boost/math/special_functions/round.hpp> + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +/*********************************************************************** + * The WBX dboard constants + **********************************************************************/ +static const bool wbx_debug = false; + +static const freq_range_t wbx_freq_range(68.75e6, 2.2e9); + +static const prop_names_t wbx_tx_antennas = list_of("TX/RX"); + +static const prop_names_t wbx_rx_antennas = list_of("TX/RX")("RX2"); + +static const uhd::dict<std::string, gain_range_t> wbx_tx_gain_ranges = map_list_of + ("PGA0", gain_range_t(0, 25, 0.05)) +; + +static const uhd::dict<std::string, gain_range_t> wbx_rx_gain_ranges = map_list_of + ("PGA0", gain_range_t(0, 31.5, 0.5)) +; + +/*********************************************************************** + * The WBX dboard + **********************************************************************/ +class wbx_xcvr : public xcvr_dboard_base{ +public: + wbx_xcvr(ctor_args_t args); + ~wbx_xcvr(void); + + void rx_get(const wax::obj &key, wax::obj &val); + void rx_set(const wax::obj &key, const wax::obj &val); + + void tx_get(const wax::obj &key, wax::obj &val); + void tx_set(const wax::obj &key, const wax::obj &val); + +private: + uhd::dict<std::string, double> _tx_gains, _rx_gains; + double _rx_lo_freq, _tx_lo_freq; + std::string _tx_ant, _rx_ant; + + void set_rx_lo_freq(double freq); + void set_tx_lo_freq(double freq); + void set_rx_ant(const std::string &ant); + void set_tx_ant(const std::string &ant); + void set_rx_gain(double gain, const std::string &name); + void set_tx_gain(double gain, const std::string &name); + + void update_atr(void); + + /*! + * Set the LO frequency for the particular dboard unit. + * \param unit which unit rx or tx + * \param target_freq the desired frequency in Hz + * \return the actual frequency in Hz + */ + double set_lo_freq(dboard_iface::unit_t unit, double target_freq); + + /*! + * Get the lock detect status of the LO. + * \param unit which unit rx or tx + * \return true for locked + */ + bool get_locked(dboard_iface::unit_t unit){ + return (this->get_iface()->read_gpio(unit) & LOCKDET_MASK) != 0; + } +}; + +/*********************************************************************** + * Register the WBX dboard (min freq, max freq, rx div2, tx div2) + **********************************************************************/ +static dboard_base::sptr make_wbx(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new wbx_xcvr(args)); +} + +UHD_STATIC_BLOCK(reg_wbx_dboards){ + dboard_manager::register_dboard(0x0053, 0x0052, &make_wbx, "WBX"); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +wbx_xcvr::wbx_xcvr(ctor_args_t args) : xcvr_dboard_base(args){ + + //enable the clocks that we need + this->get_iface()->set_clock_enabled(dboard_iface::UNIT_TX, true); + this->get_iface()->set_clock_enabled(dboard_iface::UNIT_RX, true); + + //set the gpio directions and atr controls (identically) + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_TX, TXIO_MASK); + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, RXIO_MASK); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, TXIO_MASK); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, RXIO_MASK); + if (wbx_debug) std::cerr << boost::format( + "WBX GPIO Direction: RX: 0x%08x, TX: 0x%08x" + ) % RXIO_MASK % TXIO_MASK << std::endl; + + //set some default values + set_rx_lo_freq((wbx_freq_range.start() + wbx_freq_range.stop())/2.0); + set_tx_lo_freq((wbx_freq_range.start() + wbx_freq_range.stop())/2.0); + set_rx_ant("RX2"); + + BOOST_FOREACH(const std::string &name, wbx_tx_gain_ranges.keys()){ + set_tx_gain(wbx_tx_gain_ranges[name].start(), name); + } + BOOST_FOREACH(const std::string &name, wbx_rx_gain_ranges.keys()){ + set_rx_gain(wbx_rx_gain_ranges[name].start(), name); + } +} + +wbx_xcvr::~wbx_xcvr(void){ + /* NOP */ +} + +/*********************************************************************** + * Gain Handling + **********************************************************************/ +static int rx_pga0_gain_to_iobits(double &gain){ + //clip the input + gain = wbx_rx_gain_ranges["PGA0"].clip(gain); + + //convert to attenuation and update iobits for atr + double attn = wbx_rx_gain_ranges["PGA0"].stop() - gain; + + //calculate the attenuation + int attn_code = boost::math::iround(attn*2); + int iobits = ((~attn_code) << RX_ATTN_SHIFT) & RX_ATTN_MASK; + + if (wbx_debug) std::cerr << boost::format( + "WBX Attenuation: %f dB, Code: %d, IO Bits %x, Mask: %x" + ) % attn % attn_code % (iobits & RX_ATTN_MASK) % RX_ATTN_MASK << std::endl; + + //the actual gain setting + gain = wbx_rx_gain_ranges["PGA0"].stop() - double(attn_code)/2; + + return iobits; +} + +static double tx_pga0_gain_to_dac_volts(double &gain){ + //clip the input + gain = wbx_tx_gain_ranges["PGA0"].clip(gain); + + //voltage level constants + static const double max_volts = 0.5, min_volts = 1.4; + static const double slope = (max_volts-min_volts)/wbx_tx_gain_ranges["PGA0"].stop(); + + //calculate the voltage for the aux dac + double dac_volts = gain*slope + min_volts; + + if (wbx_debug) std::cerr << boost::format( + "WBX TX Gain: %f dB, dac_volts: %f V" + ) % gain % dac_volts << std::endl; + + //the actual gain setting + gain = (dac_volts - min_volts)/slope; + + return dac_volts; +} + +void wbx_xcvr::set_tx_gain(double gain, const std::string &name){ + assert_has(wbx_tx_gain_ranges.keys(), name, "wbx tx gain name"); + if(name == "PGA0"){ + double dac_volts = tx_pga0_gain_to_dac_volts(gain); + _tx_gains[name] = gain; + + //write the new voltage to the aux dac + this->get_iface()->write_aux_dac(dboard_iface::UNIT_TX, dboard_iface::AUX_DAC_A, dac_volts); + } + else UHD_THROW_INVALID_CODE_PATH(); +} + +void wbx_xcvr::set_rx_gain(double gain, const std::string &name){ + assert_has(wbx_rx_gain_ranges.keys(), name, "wbx rx gain name"); + if(name == "PGA0"){ + rx_pga0_gain_to_iobits(gain); + _rx_gains[name] = gain; + + //write the new gain to atr regs + update_atr(); + } + else UHD_THROW_INVALID_CODE_PATH(); +} + +/*********************************************************************** + * Antenna Handling + **********************************************************************/ +void wbx_xcvr::update_atr(void){ + //calculate atr pins + int pga0_iobits = rx_pga0_gain_to_iobits(_rx_gains["PGA0"]); + + //setup the tx atr (this does not change with antenna) + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, TX_POWER_UP | ANT_XX | TX_MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, TX_POWER_UP | ANT_RX | TX_MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, TX_POWER_UP | ANT_TX | TX_MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, TX_POWER_UP | ANT_TX | TX_MIXER_ENB); + + //setup the rx atr (this does not change with antenna) + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, + pga0_iobits | RX_POWER_UP | ANT_XX | RX_MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, + pga0_iobits | RX_POWER_UP | ANT_XX | RX_MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, + pga0_iobits | RX_POWER_UP | ANT_RX2| RX_MIXER_ENB); + + //set the rx atr regs that change with antenna setting + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, + pga0_iobits | RX_POWER_UP | RX_MIXER_ENB | ((_rx_ant == "TX/RX")? ANT_TXRX : ANT_RX2)); + if (wbx_debug) std::cerr << boost::format( + "WBX RXONLY ATR REG: 0x%08x" + ) % (pga0_iobits | RX_POWER_UP | RX_MIXER_ENB | ((_rx_ant == "TX/RX")? ANT_TXRX : ANT_RX2)) << std::endl; +} + +void wbx_xcvr::set_rx_ant(const std::string &ant){ + //validate input + assert_has(wbx_rx_antennas, ant, "wbx rx antenna name"); + + //shadow the setting + _rx_ant = ant; + + //write the new antenna setting to atr regs + update_atr(); +} + +void wbx_xcvr::set_tx_ant(const std::string &ant){ + assert_has(wbx_tx_antennas, ant, "wbx tx antenna name"); + //only one antenna option, do nothing +} + +/*********************************************************************** + * Tuning + **********************************************************************/ +void wbx_xcvr::set_rx_lo_freq(double freq){ + _rx_lo_freq = set_lo_freq(dboard_iface::UNIT_RX, freq); +} + +void wbx_xcvr::set_tx_lo_freq(double freq){ + _tx_lo_freq = set_lo_freq(dboard_iface::UNIT_TX, freq); +} + +double wbx_xcvr::set_lo_freq( + dboard_iface::unit_t unit, + double target_freq +){ + if (wbx_debug) std::cerr << boost::format( + "WBX tune: target frequency %f Mhz" + ) % (target_freq/1e6) << std::endl; + + //clip the input + target_freq = wbx_freq_range.clip(target_freq); + + //map prescaler setting to mininmum integer divider (N) values (pg.18 prescaler) + static const uhd::dict<int, int> prescaler_to_min_int_div = map_list_of + (0,23) //adf4350_regs_t::PRESCALER_4_5 + (1,75) //adf4350_regs_t::PRESCALER_8_9 + ; + + //map rf divider select output dividers to enums + static const uhd::dict<int, adf4350_regs_t::rf_divider_select_t> rfdivsel_to_enum = map_list_of + (1, adf4350_regs_t::RF_DIVIDER_SELECT_DIV1) + (2, adf4350_regs_t::RF_DIVIDER_SELECT_DIV2) + (4, adf4350_regs_t::RF_DIVIDER_SELECT_DIV4) + (8, adf4350_regs_t::RF_DIVIDER_SELECT_DIV8) + (16, adf4350_regs_t::RF_DIVIDER_SELECT_DIV16) + ; + + double actual_freq, pfd_freq; + double ref_freq = this->get_iface()->get_clock_rate(unit); + int R=0, BS=0, N=0, FRAC=0, MOD=0; + int RFdiv = 1; + adf4350_regs_t::reference_divide_by_2_t T = adf4350_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED; + adf4350_regs_t::reference_doubler_t D = adf4350_regs_t::REFERENCE_DOUBLER_DISABLED; + + //Reference doubler for 50% duty cycle + // if ref_freq < 12.5MHz enable regs.reference_divide_by_2 + if(ref_freq <= 12.5e6) D = adf4350_regs_t::REFERENCE_DOUBLER_ENABLED; + + //increase RF divider until acceptable VCO frequency + //start with target_freq*2 because mixer has divide by 2 + double vco_freq = target_freq*2; + while (vco_freq < 2.2e9) { + vco_freq *= 2; + RFdiv *= 2; + } + + //use 8/9 prescaler for vco_freq > 3 GHz (pg.18 prescaler) + adf4350_regs_t::prescaler_t prescaler = vco_freq > 3e9 ? adf4350_regs_t::PRESCALER_8_9 : adf4350_regs_t::PRESCALER_4_5; + + /* + * The goal here is to loop though possible R dividers, + * band select clock dividers, N (int) dividers, and FRAC + * (frac) dividers. + * + * Calculate the N and F dividers for each set of values. + * The loop exists when it meets all of the constraints. + * The resulting loop values are loaded into the registers. + * + * from pg.21 + * + * f_pfd = f_ref*(1+D)/(R*(1+T)) + * f_vco = (N + (FRAC/MOD))*f_pfd + * N = f_vco/f_pfd - FRAC/MOD = f_vco*((R*(T+1))/(f_ref*(1+D))) - FRAC/MOD + * f_rf = f_vco/RFdiv) + * f_actual = f_rf/2 + */ + for(R = 1; R <= 1023; R+=1){ + //PFD input frequency = f_ref/R ... ignoring Reference doubler/divide-by-2 (D & T) + pfd_freq = ref_freq*(1+D)/(R*(1+T)); + + //keep the PFD frequency at or below 25MHz (Loop Filter Bandwidth) + if (pfd_freq > 25e6) continue; + + //ignore fractional part of tuning + N = int(std::floor(vco_freq/pfd_freq)); + + //keep N > minimum int divider requirement + if (N < prescaler_to_min_int_div[prescaler]) continue; + + for(BS=1; BS <= 255; BS+=1){ + //keep the band select frequency at or below 100KHz + //constraint on band select clock + if (pfd_freq/BS > 100e3) continue; + goto done_loop; + } + } done_loop: + + //Fractional-N calculation + MOD = 4095; //max fractional accuracy + FRAC = int((vco_freq/pfd_freq - N)*MOD); + + //Reference divide-by-2 for 50% duty cycle + // if R even, move one divide by 2 to to regs.reference_divide_by_2 + if(R % 2 == 0){ + T = adf4350_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED; + R /= 2; + } + + //actual frequency calculation + actual_freq = double((N + (double(FRAC)/double(MOD)))*ref_freq*(1+int(D))/(R*(1+int(T)))/RFdiv/2); + + + if (wbx_debug) { + std::cerr << boost::format("WBX Intermediates: ref=%0.2f, outdiv=%f, fbdiv=%f") % (ref_freq*(1+int(D))/(R*(1+int(T)))) % double(RFdiv*2) % double(N + double(FRAC)/double(MOD)) << std::endl; + + std::cerr << boost::format("WBX tune: R=%d, BS=%d, N=%d, FRAC=%d, MOD=%d, T=%d, D=%d, RFdiv=%d, LD=%d" + ) % R % BS % N % FRAC % MOD % T % D % RFdiv % get_locked(unit)<< std::endl + << boost::format("WBX Frequencies (MHz): REQ=%0.2f, ACT=%0.2f, VCO=%0.2f, PFD=%0.2f, BAND=%0.2f" + ) % (target_freq/1e6) % (actual_freq/1e6) % (vco_freq/1e6) % (pfd_freq/1e6) % (pfd_freq/BS/1e6) << std::endl; + } + + //load the register values + adf4350_regs_t regs; + + regs.frac_12_bit = FRAC; + regs.int_16_bit = N; + regs.mod_12_bit = MOD; + regs.prescaler = prescaler; + regs.r_counter_10_bit = R; + regs.reference_divide_by_2 = T; + regs.reference_doubler = D; + regs.band_select_clock_div = BS; + UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(RFdiv)); + regs.rf_divider_select = rfdivsel_to_enum[RFdiv]; + + //write the registers + //correct power-up sequence to write registers (5, 4, 3, 2, 1, 0) + int addr; + + for(addr=5; addr>=0; addr--){ + if (wbx_debug) std::cerr << boost::format( + "WBX SPI Reg (0x%02x): 0x%08x" + ) % addr % regs.get_reg(addr) << std::endl; + this->get_iface()->write_spi( + unit, spi_config_t::EDGE_RISE, + regs.get_reg(addr), 32 + ); + } + + //return the actual frequency + if (wbx_debug) std::cerr << boost::format( + "WBX tune: actual frequency %f Mhz" + ) % (actual_freq/1e6) << std::endl; + return actual_freq; +} + +/*********************************************************************** + * RX Get and Set + **********************************************************************/ +void wbx_xcvr::rx_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = get_rx_id().to_pp_string(); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + assert_has(_rx_gains.keys(), key.name, "wbx rx gain name"); + val = _rx_gains[key.name]; + return; + + case SUBDEV_PROP_GAIN_RANGE: + assert_has(wbx_rx_gain_ranges.keys(), key.name, "wbx rx gain name"); + val = wbx_rx_gain_ranges[key.name]; + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(wbx_rx_gain_ranges.keys()); + return; + + case SUBDEV_PROP_FREQ: + val = _rx_lo_freq; + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = wbx_freq_range; + return; + + case SUBDEV_PROP_ANTENNA: + val = _rx_ant; + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = wbx_rx_antennas; + return; + + case SUBDEV_PROP_CONNECTION: + val = SUBDEV_CONN_COMPLEX_IQ; + return; + + case SUBDEV_PROP_ENABLED: + val = true; //always enabled + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_SENSOR: + UHD_ASSERT_THROW(key.name == "lo_locked"); + val = sensor_value_t("LO", this->get_locked(dboard_iface::UNIT_RX), "locked", "unlocked"); + return; + + case SUBDEV_PROP_SENSOR_NAMES: + val = prop_names_t(1, "lo_locked"); + return; + + case SUBDEV_PROP_BANDWIDTH: + val = 2*20.0e6; //20MHz low-pass, we want complex double-sided + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void wbx_xcvr::rx_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + this->set_rx_lo_freq(val.as<double>()); + return; + + case SUBDEV_PROP_GAIN: + this->set_rx_gain(val.as<double>(), key.name); + return; + + case SUBDEV_PROP_ANTENNA: + this->set_rx_ant(val.as<std::string>()); + return; + + case SUBDEV_PROP_ENABLED: + return; //always enabled + + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("WBX: No tunable bandwidth, fixed filtered to 40MHz")) + ); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX Get and Set + **********************************************************************/ +void wbx_xcvr::tx_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = get_tx_id().to_pp_string(); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + assert_has(_tx_gains.keys(), key.name, "wbx tx gain name"); + val = _tx_gains[key.name]; + return; + + case SUBDEV_PROP_GAIN_RANGE: + assert_has(wbx_tx_gain_ranges.keys(), key.name, "wbx tx gain name"); + val = wbx_tx_gain_ranges[key.name]; + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(wbx_tx_gain_ranges.keys()); + return; + + case SUBDEV_PROP_FREQ: + val = _tx_lo_freq; + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = wbx_freq_range; + return; + + case SUBDEV_PROP_ANTENNA: + val = std::string("TX/RX"); + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = wbx_tx_antennas; + return; + + case SUBDEV_PROP_CONNECTION: + val = SUBDEV_CONN_COMPLEX_IQ; + return; + + case SUBDEV_PROP_ENABLED: + val = true; //always enabled + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_SENSOR: + UHD_ASSERT_THROW(key.name == "lo_locked"); + val = sensor_value_t("LO", this->get_locked(dboard_iface::UNIT_TX), "locked", "unlocked"); + return; + + case SUBDEV_PROP_SENSOR_NAMES: + val = prop_names_t(1, "lo_locked"); + return; + + case SUBDEV_PROP_BANDWIDTH: + val = 2*20.0e6; //20MHz low-pass, we want complex double-sided + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void wbx_xcvr::tx_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + this->set_tx_lo_freq(val.as<double>()); + return; + + case SUBDEV_PROP_GAIN: + this->set_tx_gain(val.as<double>(), key.name); + return; + + case SUBDEV_PROP_ANTENNA: + this->set_tx_ant(val.as<std::string>()); + return; + + case SUBDEV_PROP_ENABLED: + return; //always enabled + + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("WBX: No tunable bandwidth, fixed filtered to 40MHz")) + ); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/dboard/db_xcvr2450.cpp b/host/lib/usrp/dboard/db_xcvr2450.cpp new file mode 100644 index 000000000..9d25b30a5 --- /dev/null +++ b/host/lib/usrp/dboard/db_xcvr2450.cpp @@ -0,0 +1,774 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +// TX IO Pins +#define HB_PA_OFF_TXIO (1 << 15) // 5GHz PA, 1 = off, 0 = on +#define LB_PA_OFF_TXIO (1 << 14) // 2.4GHz PA, 1 = off, 0 = on +#define ANTSEL_TX1_RX2_TXIO (1 << 13) // 1 = Ant 1 to TX, Ant 2 to RX +#define ANTSEL_TX2_RX1_TXIO (1 << 12) // 1 = Ant 2 to TX, Ant 1 to RX +#define TX_EN_TXIO (1 << 11) // 1 = TX on, 0 = TX off +#define AD9515DIV_TXIO (1 << 4) // 1 = Div by 3, 0 = Div by 2 + +#define TXIO_MASK (HB_PA_OFF_TXIO | LB_PA_OFF_TXIO | ANTSEL_TX1_RX2_TXIO | ANTSEL_TX2_RX1_TXIO | TX_EN_TXIO | AD9515DIV_TXIO) + +// TX IO Functions +#define HB_PA_TXIO LB_PA_OFF_TXIO +#define LB_PA_TXIO HB_PA_OFF_TXIO +#define TX_ENB_TXIO TX_EN_TXIO +#define TX_DIS_TXIO 0 +#define AD9515DIV_3_TXIO AD9515DIV_TXIO +#define AD9515DIV_2_TXIO 0 + +// RX IO Pins +#define LOCKDET_RXIO (1 << 15) // This is an INPUT!!! +#define POWER_RXIO (1 << 14) // 1 = power on, 0 = shutdown +#define RX_EN_RXIO (1 << 13) // 1 = RX on, 0 = RX off +#define RX_HP_RXIO (1 << 12) // 0 = Fc set by rx_hpf, 1 = 600 KHz + +#define RXIO_MASK (POWER_RXIO | RX_EN_RXIO | RX_HP_RXIO) + +// RX IO Functions +#define POWER_UP_RXIO POWER_RXIO +#define POWER_DOWN_RXIO 0 +#define RX_ENB_RXIO RX_EN_RXIO +#define RX_DIS_RXIO 0 + +#include "max2829_regs.hpp" +#include <uhd/utils/static.hpp> +#include <uhd/utils/assert_has.hpp> +#include <uhd/utils/algorithm.hpp> +#include <uhd/utils/warning.hpp> +#include <uhd/types/ranges.hpp> +#include <uhd/types/sensors.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/usrp/dboard_base.hpp> +#include <uhd/usrp/dboard_manager.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <boost/math/special_functions/round.hpp> +#include <utility> + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +/*********************************************************************** + * The XCVR 2450 constants + **********************************************************************/ +static const bool xcvr2450_debug = false; + +static const freq_range_t xcvr_freq_range = list_of + (range_t(2.4e9, 2.5e9)) + (range_t(4.9e9, 6.0e9)) +; + +static const prop_names_t xcvr_antennas = list_of("J1")("J2"); + +static const uhd::dict<std::string, gain_range_t> xcvr_tx_gain_ranges = map_list_of + ("VGA", gain_range_t(0, 30, 0.5)) + ("BB", gain_range_t(0, 5, 1.5)) +; +static const uhd::dict<std::string, gain_range_t> xcvr_rx_gain_ranges = map_list_of + ("LNA", gain_range_t(list_of + (range_t(0)) + (range_t(15)) + (range_t(30.5)) + )) + ("VGA", gain_range_t(0, 62, 2.0)) +; + +/*********************************************************************** + * The XCVR 2450 dboard class + **********************************************************************/ +class xcvr2450 : public xcvr_dboard_base{ +public: + xcvr2450(ctor_args_t args); + ~xcvr2450(void); + + void rx_get(const wax::obj &key, wax::obj &val); + void rx_set(const wax::obj &key, const wax::obj &val); + + void tx_get(const wax::obj &key, wax::obj &val); + void tx_set(const wax::obj &key, const wax::obj &val); + +private: + double _lo_freq; + double _rx_bandwidth, _tx_bandwidth; + uhd::dict<std::string, double> _tx_gains, _rx_gains; + std::string _tx_ant, _rx_ant; + int _ad9515div; + max2829_regs_t _max2829_regs; + + void set_lo_freq(double target_freq); + void set_tx_ant(const std::string &ant); + void set_rx_ant(const std::string &ant); + void set_tx_gain(double gain, const std::string &name); + void set_rx_gain(double gain, const std::string &name); + void set_rx_bandwidth(double bandwidth); + void set_tx_bandwidth(double bandwidth); + + void update_atr(void); + void spi_reset(void); + void send_reg(boost::uint8_t addr){ + boost::uint32_t value = _max2829_regs.get_reg(addr); + if(xcvr2450_debug) std::cerr << boost::format( + "XCVR2450: send reg 0x%02x, value 0x%05x" + ) % int(addr) % value << std::endl; + this->get_iface()->write_spi( + dboard_iface::UNIT_RX, + spi_config_t::EDGE_RISE, + value, 24 + ); + } + + static bool is_highband(double freq){return freq > 3e9;} + + /*! + * Is the LO locked? + * \return true for locked + */ + bool get_locked(void){ + return (this->get_iface()->read_gpio(dboard_iface::UNIT_RX) & LOCKDET_RXIO) != 0; + } + + /*! + * Read the RSSI from the aux adc + * \return the rssi in dB + */ + double get_rssi(void){ + //constants for the rssi calculation + static const double min_v = 0.5, max_v = 2.5; + static const double rssi_dyn_range = 60; + //calculate the rssi from the voltage + double voltage = this->get_iface()->read_aux_adc(dboard_iface::UNIT_RX, dboard_iface::AUX_ADC_B); + return rssi_dyn_range*(voltage - min_v)/(max_v - min_v); + } +}; + +/*********************************************************************** + * Register the XCVR 2450 dboard + **********************************************************************/ +static dboard_base::sptr make_xcvr2450(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new xcvr2450(args)); +} + +UHD_STATIC_BLOCK(reg_xcvr2450_dboard){ + //register the factory function for the rx and tx dbids + dboard_manager::register_dboard(0x0061, 0x0060, &make_xcvr2450, "XCVR2450"); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +xcvr2450::xcvr2450(ctor_args_t args) : xcvr_dboard_base(args){ + //enable only the clocks we need + this->get_iface()->set_clock_enabled(dboard_iface::UNIT_TX, true); + + //set the gpio directions and atr controls (identically) + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_TX, TXIO_MASK); + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, RXIO_MASK); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, TXIO_MASK); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, RXIO_MASK); + + spi_reset(); //prepare the spi + + _rx_bandwidth = 9.5e6; + _tx_bandwidth = 12.0e6; + + //setup the misc max2829 registers + _max2829_regs.mimo_select = max2829_regs_t::MIMO_SELECT_MIMO; + _max2829_regs.band_sel_mimo = max2829_regs_t::BAND_SEL_MIMO_MIMO; + _max2829_regs.pll_cp_select = max2829_regs_t::PLL_CP_SELECT_4MA; + _max2829_regs.rssi_high_bw = max2829_regs_t::RSSI_HIGH_BW_6MHZ; + _max2829_regs.tx_lpf_coarse_adj = max2829_regs_t::TX_LPF_COARSE_ADJ_12MHZ; + _max2829_regs.rx_lpf_coarse_adj = max2829_regs_t::RX_LPF_COARSE_ADJ_9_5MHZ; + _max2829_regs.rx_lpf_fine_adj = max2829_regs_t::RX_LPF_FINE_ADJ_100; + _max2829_regs.rx_vga_gain_spi = max2829_regs_t::RX_VGA_GAIN_SPI_SPI; + _max2829_regs.rssi_output_range = max2829_regs_t::RSSI_OUTPUT_RANGE_HIGH; + _max2829_regs.rssi_op_mode = max2829_regs_t::RSSI_OP_MODE_ENABLED; + _max2829_regs.rssi_pin_fcn = max2829_regs_t::RSSI_PIN_FCN_RSSI; + _max2829_regs.rx_highpass = max2829_regs_t::RX_HIGHPASS_100HZ; + _max2829_regs.tx_vga_gain_spi = max2829_regs_t::TX_VGA_GAIN_SPI_SPI; + _max2829_regs.pa_driver_linearity = max2829_regs_t::PA_DRIVER_LINEARITY_78; + _max2829_regs.tx_vga_linearity = max2829_regs_t::TX_VGA_LINEARITY_78; + _max2829_regs.tx_upconv_linearity = max2829_regs_t::TX_UPCONV_LINEARITY_78; + + //send initial register settings + for(boost::uint8_t reg = 0x2; reg <= 0xC; reg++){ + this->send_reg(reg); + } + + //set defaults for LO, gains, antennas + set_lo_freq(2.45e9); + set_rx_ant(xcvr_antennas.at(0)); + set_tx_ant(xcvr_antennas.at(1)); + BOOST_FOREACH(const std::string &name, xcvr_tx_gain_ranges.keys()){ + set_tx_gain(xcvr_tx_gain_ranges[name].start(), name); + } + BOOST_FOREACH(const std::string &name, xcvr_rx_gain_ranges.keys()){ + set_rx_gain(xcvr_rx_gain_ranges[name].start(), name); + } +} + +xcvr2450::~xcvr2450(void){ + spi_reset(); +} + +void xcvr2450::spi_reset(void){ + //spi reset mode: global enable = off, tx and rx enable = on + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, TX_ENB_TXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, RX_ENB_RXIO | POWER_DOWN_RXIO); + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); + + //take it back out of spi reset mode and wait a bit + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, RX_DIS_RXIO | POWER_UP_RXIO); + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); +} + +void xcvr2450::update_atr(void){ + //calculate tx atr pins + int band_sel = (xcvr2450::is_highband(_lo_freq))? HB_PA_TXIO : LB_PA_TXIO; + int tx_ant_sel = (_tx_ant == "J1")? ANTSEL_TX1_RX2_TXIO : ANTSEL_TX2_RX1_TXIO; + int rx_ant_sel = (_rx_ant == "J2")? ANTSEL_TX1_RX2_TXIO : ANTSEL_TX2_RX1_TXIO; + int xx_ant_sel = tx_ant_sel; //Prefer the tx antenna selection for full duplex, + //due to the issue that USRP1 will take the value of full duplex for its TXATR. + int ad9515div = (_ad9515div == 3)? AD9515DIV_3_TXIO : AD9515DIV_2_TXIO; + + //set the tx registers + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, band_sel | ad9515div | TX_DIS_TXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, band_sel | ad9515div | TX_DIS_TXIO | rx_ant_sel); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, band_sel | ad9515div | TX_ENB_TXIO | tx_ant_sel); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, band_sel | ad9515div | TX_ENB_TXIO | xx_ant_sel); + + //set the rx registers + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, POWER_UP_RXIO | RX_DIS_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, POWER_UP_RXIO | RX_ENB_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, POWER_UP_RXIO | RX_DIS_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, POWER_UP_RXIO | RX_DIS_RXIO); +} + +/*********************************************************************** + * Tuning + **********************************************************************/ +void xcvr2450::set_lo_freq(double target_freq){ + + //clip the input to the range + target_freq = xcvr_freq_range.clip(target_freq); + + //variables used in the calculation below + double scaler = xcvr2450::is_highband(target_freq)? (4.0/5.0) : (4.0/3.0); + double ref_freq = this->get_iface()->get_clock_rate(dboard_iface::UNIT_TX); + int R, intdiv, fracdiv; + + //loop through values until we get a match + for(_ad9515div = 2; _ad9515div <= 3; _ad9515div++){ + for(R = 1; R <= 7; R++){ + double N = (target_freq*scaler*R*_ad9515div)/ref_freq; + intdiv = int(std::floor(N)); + fracdiv = boost::math::iround((N - intdiv)*double(1 << 16)); + //actual minimum is 128, but most chips seems to require higher to lock + if (intdiv < 131 or intdiv > 255) continue; + //constraints met: exit loop + goto done_loop; + } + } done_loop: + + //calculate the actual freq from the values above + double N = double(intdiv) + double(fracdiv)/double(1 << 16); + _lo_freq = (N*ref_freq)/(scaler*R*_ad9515div); + + if (xcvr2450_debug) std::cerr + << boost::format("XCVR2450 tune:\n") + << boost::format(" R=%d, N=%f, ad9515=%d, scaler=%f\n") % R % N % _ad9515div % scaler + << boost::format(" Ref Freq=%fMHz\n") % (ref_freq/1e6) + << boost::format(" Target Freq=%fMHz\n") % (target_freq/1e6) + << boost::format(" Actual Freq=%fMHz\n") % (_lo_freq/1e6) + << std::endl; + + //high-high band or low-high band? + if(_lo_freq > (5.35e9 + 5.47e9)/2.0){ + if (xcvr2450_debug) std::cerr << "XCVR2450 tune: Using high-high band" << std::endl; + _max2829_regs.band_select_802_11a = max2829_regs_t::BAND_SELECT_802_11A_5_47GHZ_TO_5_875GHZ; + }else{ + if (xcvr2450_debug) std::cerr << "XCVR2450 tune: Using low-high band" << std::endl; + _max2829_regs.band_select_802_11a = max2829_regs_t::BAND_SELECT_802_11A_4_9GHZ_TO_5_35GHZ; + } + + //new band select settings and ad9515 divider + this->update_atr(); + + //load new counters into registers + _max2829_regs.int_div_ratio_word = intdiv; + _max2829_regs.frac_div_ratio_lsb = fracdiv & 0x3; + _max2829_regs.frac_div_ratio_msb = fracdiv >> 2; + this->send_reg(0x3); //integer + this->send_reg(0x4); //fractional + + //load the reference divider and band select into registers + //toggle the bandswitch from off to automatic (which really means start) + _max2829_regs.ref_divider = R; + _max2829_regs.band_select = (xcvr2450::is_highband(_lo_freq))? + max2829_regs_t::BAND_SELECT_5GHZ : + max2829_regs_t::BAND_SELECT_2_4GHZ ; + _max2829_regs.vco_bandswitch = max2829_regs_t::VCO_BANDSWITCH_DISABLE; + this->send_reg(0x5); + _max2829_regs.vco_bandswitch = max2829_regs_t::VCO_BANDSWITCH_AUTOMATIC;; + this->send_reg(0x5); +} + +/*********************************************************************** + * Antenna Handling + **********************************************************************/ +void xcvr2450::set_tx_ant(const std::string &ant){ + assert_has(xcvr_antennas, ant, "xcvr antenna name"); + _tx_ant = ant; + this->update_atr(); //sets the atr to the new antenna setting +} + +void xcvr2450::set_rx_ant(const std::string &ant){ + assert_has(xcvr_antennas, ant, "xcvr antenna name"); + _rx_ant = ant; + this->update_atr(); //sets the atr to the new antenna setting +} + +/*********************************************************************** + * Gain Handling + **********************************************************************/ +/*! + * Convert a requested gain for the tx vga into the integer register value. + * The gain passed into the function will be set to the actual value. + * \param gain the requested gain in dB + * \return 6 bit the register value + */ +static int gain_to_tx_vga_reg(double &gain){ + //calculate the register value + int reg = uhd::clip(boost::math::iround(gain*60/30.0) + 3, 0, 63); + + //calculate the actual gain value + if (reg < 4) gain = 0; + else if (reg < 48) gain = double(reg/2 - 1); + else gain = double(reg/2.0 - 1.5); + + //return register value + return reg; +} + +/*! + * Convert a requested gain for the tx bb into the integer register value. + * The gain passed into the function will be set to the actual value. + * \param gain the requested gain in dB + * \return gain enum value + */ +static max2829_regs_t::tx_baseband_gain_t gain_to_tx_bb_reg(double &gain){ + int reg = uhd::clip(boost::math::iround(gain*3/5.0), 0, 3); + switch(reg){ + case 0: + gain = 0; + return max2829_regs_t::TX_BASEBAND_GAIN_0DB; + case 1: + gain = 2; + return max2829_regs_t::TX_BASEBAND_GAIN_2DB; + case 2: + gain = 3.5; + return max2829_regs_t::TX_BASEBAND_GAIN_3_5DB; + case 3: + gain = 5; + return max2829_regs_t::TX_BASEBAND_GAIN_5DB; + } + UHD_THROW_INVALID_CODE_PATH(); +} + +/*! + * Convert a requested gain for the rx vga into the integer register value. + * The gain passed into the function will be set to the actual value. + * \param gain the requested gain in dB + * \return 5 bit the register value + */ +static int gain_to_rx_vga_reg(double &gain){ + int reg = uhd::clip(boost::math::iround(gain/2.0), 0, 31); + gain = double(reg*2); + return reg; +} + +/*! + * Convert a requested gain for the rx lna into the integer register value. + * The gain passed into the function will be set to the actual value. + * \param gain the requested gain in dB + * \return 2 bit the register value + */ +static int gain_to_rx_lna_reg(double &gain){ + int reg = uhd::clip(boost::math::iround(gain*2/30.5) + 1, 0, 3); + switch(reg){ + case 0: + case 1: gain = 0; break; + case 2: gain = 15; break; + case 3: gain = 30.5; break; + } + return reg; +} + +void xcvr2450::set_tx_gain(double gain, const std::string &name){ + assert_has(xcvr_tx_gain_ranges.keys(), name, "xcvr tx gain name"); + if (name == "VGA"){ + _max2829_regs.tx_vga_gain = gain_to_tx_vga_reg(gain); + send_reg(0xC); + } + else if(name == "BB"){ + _max2829_regs.tx_baseband_gain = gain_to_tx_bb_reg(gain); + send_reg(0x9); + } + else UHD_THROW_INVALID_CODE_PATH(); + _tx_gains[name] = gain; +} + +void xcvr2450::set_rx_gain(double gain, const std::string &name){ + assert_has(xcvr_rx_gain_ranges.keys(), name, "xcvr rx gain name"); + if (name == "VGA"){ + _max2829_regs.rx_vga_gain = gain_to_rx_vga_reg(gain); + send_reg(0xB); + } + else if(name == "LNA"){ + _max2829_regs.rx_lna_gain = gain_to_rx_lna_reg(gain); + send_reg(0xB); + } + else UHD_THROW_INVALID_CODE_PATH(); + _rx_gains[name] = gain; +} + + +/*********************************************************************** + * Bandwidth Handling + **********************************************************************/ +static max2829_regs_t::tx_lpf_coarse_adj_t bandwidth_to_tx_lpf_coarse_reg(double &bandwidth){ + int reg = uhd::clip(boost::math::iround((bandwidth-6.0e6)/6.0e6), 1, 3); + + switch(reg){ + case 1: // bandwidth < 15MHz + bandwidth = 12e6; + return max2829_regs_t::TX_LPF_COARSE_ADJ_12MHZ; + case 2: // 15MHz < bandwidth < 21MHz + bandwidth = 18e6; + return max2829_regs_t::TX_LPF_COARSE_ADJ_18MHZ; + case 3: // bandwidth > 21MHz + bandwidth = 24e6; + return max2829_regs_t::TX_LPF_COARSE_ADJ_24MHZ; + } + UHD_THROW_INVALID_CODE_PATH(); +} + +static max2829_regs_t::rx_lpf_fine_adj_t bandwidth_to_rx_lpf_fine_reg(double &bandwidth, double requested_bandwidth){ + int reg = uhd::clip(boost::math::iround((requested_bandwidth/bandwidth)/0.05), 18, 22); + + switch(reg){ + case 18: // requested_bandwidth < 92.5% + bandwidth = 0.9 * bandwidth; + return max2829_regs_t::RX_LPF_FINE_ADJ_90; + case 19: // 92.5% < requested_bandwidth < 97.5% + bandwidth = 0.95 * bandwidth; + return max2829_regs_t::RX_LPF_FINE_ADJ_95; + case 20: // 97.5% < requested_bandwidth < 102.5% + bandwidth = 1.0 * bandwidth; + return max2829_regs_t::RX_LPF_FINE_ADJ_100; + case 21: // 102.5% < requested_bandwidth < 107.5% + bandwidth = 1.05 * bandwidth; + return max2829_regs_t::RX_LPF_FINE_ADJ_105; + case 22: // 107.5% < requested_bandwidth + bandwidth = 1.1 * bandwidth; + return max2829_regs_t::RX_LPF_FINE_ADJ_110; + } + UHD_THROW_INVALID_CODE_PATH(); +} + +static max2829_regs_t::rx_lpf_coarse_adj_t bandwidth_to_rx_lpf_coarse_reg(double &bandwidth){ + int reg = uhd::clip(boost::math::iround((bandwidth-7.0e6)/1.0e6), 0, 11); + + switch(reg){ + case 0: // bandwidth < 7.5MHz + case 1: // 7.5MHz < bandwidth < 8.5MHz + bandwidth = 7.5e6; + return max2829_regs_t::RX_LPF_COARSE_ADJ_7_5MHZ; + case 2: // 8.5MHz < bandwidth < 9.5MHz + case 3: // 9.5MHz < bandwidth < 10.5MHz + case 4: // 10.5MHz < bandwidth < 11.5MHz + bandwidth = 9.5e6; + return max2829_regs_t::RX_LPF_COARSE_ADJ_9_5MHZ; + case 5: // 11.5MHz < bandwidth < 12.5MHz + case 6: // 12.5MHz < bandwidth < 13.5MHz + case 7: // 13.5MHz < bandwidth < 14.5MHz + case 8: // 14.5MHz < bandwidth < 15.5MHz + bandwidth = 14e6; + return max2829_regs_t::RX_LPF_COARSE_ADJ_14MHZ; + case 9: // 15.5MHz < bandwidth < 16.5MHz + case 10: // 16.5MHz < bandwidth < 17.5MHz + case 11: // 17.5MHz < bandwidth + bandwidth = 18e6; + return max2829_regs_t::RX_LPF_COARSE_ADJ_18MHZ; + } + UHD_THROW_INVALID_CODE_PATH(); +} + +void xcvr2450::set_rx_bandwidth(double bandwidth){ + double requested_bandwidth = bandwidth; + + //compute coarse low pass cutoff frequency setting + _max2829_regs.rx_lpf_coarse_adj = bandwidth_to_rx_lpf_coarse_reg(bandwidth); + + //compute fine low pass cutoff frequency setting + _max2829_regs.rx_lpf_fine_adj = bandwidth_to_rx_lpf_fine_reg(bandwidth, requested_bandwidth); + + //shadow bandwidth setting + _rx_bandwidth = bandwidth; + + //update register + send_reg(0x7); + + if (xcvr2450_debug) std::cerr << boost::format( + "XCVR2450 RX Bandwidth (lp_fc): %f Hz, coarse reg: %d, fine reg: %d" + ) % _rx_bandwidth % (int(_max2829_regs.rx_lpf_coarse_adj)) % (int(_max2829_regs.rx_lpf_fine_adj)) << std::endl; +} + +void xcvr2450::set_tx_bandwidth(double bandwidth){ + //compute coarse low pass cutoff frequency setting + _max2829_regs.tx_lpf_coarse_adj = bandwidth_to_tx_lpf_coarse_reg(bandwidth); + + //shadow bandwidth setting + _tx_bandwidth = bandwidth; + + //update register + send_reg(0x7); + + if (xcvr2450_debug) std::cerr << boost::format( + "XCVR2450 TX Bandwidth (lp_fc): %f Hz, coarse reg: %d" + ) % _tx_bandwidth % (int(_max2829_regs.tx_lpf_coarse_adj)) << std::endl; +} + + +/*********************************************************************** + * RX Get and Set + **********************************************************************/ +void xcvr2450::rx_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = get_rx_id().to_pp_string(); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + assert_has(_rx_gains.keys(), key.name, "xcvr rx gain name"); + val = _rx_gains[key.name]; + return; + + case SUBDEV_PROP_GAIN_RANGE: + assert_has(xcvr_rx_gain_ranges.keys(), key.name, "xcvr rx gain name"); + val = xcvr_rx_gain_ranges[key.name]; + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(xcvr_rx_gain_ranges.keys()); + return; + + case SUBDEV_PROP_FREQ: + val = _lo_freq; + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = xcvr_freq_range; + return; + + case SUBDEV_PROP_ANTENNA: + val = _rx_ant; + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = xcvr_antennas; + return; + + case SUBDEV_PROP_CONNECTION: + val = SUBDEV_CONN_COMPLEX_IQ; + return; + + case SUBDEV_PROP_ENABLED: + val = true; //always enabled + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_SENSOR: + if (key.name == "lo_locked") + val = sensor_value_t("LO", this->get_locked(), "locked", "unlocked"); + else if (key.name == "rssi") + val = sensor_value_t("RSSI", this->get_rssi(), "dB"); + else + UHD_THROW_INVALID_CODE_PATH(); + return; + + case SUBDEV_PROP_SENSOR_NAMES:{ + prop_names_t names = list_of("lo_locked")("rssi"); + val = names; + } + return; + + case SUBDEV_PROP_BANDWIDTH: + val = 2*_rx_bandwidth; //_tx_bandwidth is low-pass, we want complex double-sided + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void xcvr2450::rx_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + this->set_lo_freq(val.as<double>()); + return; + + case SUBDEV_PROP_GAIN: + this->set_rx_gain(val.as<double>(), key.name); + return; + + case SUBDEV_PROP_ANTENNA: + this->set_rx_ant(val.as<std::string>()); + return; + + case SUBDEV_PROP_BANDWIDTH: + this->set_rx_bandwidth(val.as<double>()/2.0); //complex double-sided, we want low-pass + return; + + case SUBDEV_PROP_ENABLED: + return; //always enabled + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX Get and Set + **********************************************************************/ +void xcvr2450::tx_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = get_tx_id().to_pp_string(); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + assert_has(_tx_gains.keys(), key.name, "xcvr tx gain name"); + val = _tx_gains[key.name]; + return; + + case SUBDEV_PROP_GAIN_RANGE: + assert_has(xcvr_tx_gain_ranges.keys(), key.name, "xcvr tx gain name"); + val = xcvr_tx_gain_ranges[key.name]; + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(xcvr_tx_gain_ranges.keys()); + return; + + case SUBDEV_PROP_FREQ: + val = _lo_freq; + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = xcvr_freq_range; + return; + + case SUBDEV_PROP_ANTENNA: + val = _tx_ant; + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = xcvr_antennas; + return; + + case SUBDEV_PROP_CONNECTION: + val = SUBDEV_CONN_COMPLEX_QI; + return; + + case SUBDEV_PROP_ENABLED: + val = true; //always enabled + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_SENSOR: + UHD_ASSERT_THROW(key.name == "lo_locked"); + val = sensor_value_t("LO", this->get_locked(), "locked", "unlocked"); + return; + + case SUBDEV_PROP_SENSOR_NAMES: + val = prop_names_t(1, "lo_locked"); + return; + + case SUBDEV_PROP_BANDWIDTH: + val = 2*_tx_bandwidth; //_tx_bandwidth is low-pass, we want complex double-sided + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void xcvr2450::tx_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + set_lo_freq(val.as<double>()); + return; + + case SUBDEV_PROP_GAIN: + this->set_tx_gain(val.as<double>(), key.name); + return; + + case SUBDEV_PROP_BANDWIDTH: + this->set_tx_bandwidth(val.as<double>()/2.0); //complex double-sided, we want low-pass + return; + + case SUBDEV_PROP_ANTENNA: + this->set_tx_ant(val.as<std::string>()); + return; + + case SUBDEV_PROP_ENABLED: + return; //always enabled + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/dboard_base.cpp b/host/lib/usrp/dboard_base.cpp new file mode 100644 index 000000000..999dd9ffc --- /dev/null +++ b/host/lib/usrp/dboard_base.cpp @@ -0,0 +1,123 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "dboard_ctor_args.hpp" +#include <uhd/usrp/dboard_base.hpp> +#include <boost/format.hpp> +#include <stdexcept> + +using namespace uhd::usrp; + +/*********************************************************************** + * dboard_base dboard dboard_base class + **********************************************************************/ +struct dboard_base::impl{ + dboard_ctor_args_t args; +}; + +dboard_base::dboard_base(ctor_args_t args){ + _impl = UHD_PIMPL_MAKE(impl, ()); + _impl->args = *static_cast<dboard_ctor_args_t *>(args); +} + +dboard_base::~dboard_base(void){ + /* NOP */ +} + +std::string dboard_base::get_subdev_name(void){ + return _impl->args.sd_name; +} + +dboard_iface::sptr dboard_base::get_iface(void){ + return _impl->args.db_iface; +} + +dboard_id_t dboard_base::get_rx_id(void){ + return _impl->args.rx_id; +} + +dboard_id_t dboard_base::get_tx_id(void){ + return _impl->args.tx_id; +} + +/*********************************************************************** + * xcvr dboard dboard_base class + **********************************************************************/ +xcvr_dboard_base::xcvr_dboard_base(ctor_args_t args) : dboard_base(args){ + if (get_rx_id() == dboard_id_t::none()){ + throw uhd::runtime_error(str(boost::format( + "cannot create xcvr board when the rx id is \"%s\"" + ) % dboard_id_t::none().to_pp_string())); + } + if (get_tx_id() == dboard_id_t::none()){ + throw uhd::runtime_error(str(boost::format( + "cannot create xcvr board when the tx id is \"%s\"" + ) % dboard_id_t::none().to_pp_string())); + } +} + +xcvr_dboard_base::~xcvr_dboard_base(void){ + /* NOP */ +} + +/*********************************************************************** + * rx dboard dboard_base class + **********************************************************************/ +rx_dboard_base::rx_dboard_base(ctor_args_t args) : dboard_base(args){ + if (get_tx_id() != dboard_id_t::none()){ + throw uhd::runtime_error(str(boost::format( + "cannot create rx board when the tx id is \"%s\"" + " -> expected a tx id of \"%s\"" + ) % get_tx_id().to_pp_string() % dboard_id_t::none().to_pp_string())); + } +} + +rx_dboard_base::~rx_dboard_base(void){ + /* NOP */ +} + +void rx_dboard_base::tx_get(const wax::obj &, wax::obj &){ + throw uhd::runtime_error("cannot call tx_get on a rx dboard"); +} + +void rx_dboard_base::tx_set(const wax::obj &, const wax::obj &){ + throw uhd::runtime_error("cannot call tx_set on a rx dboard"); +} + +/*********************************************************************** + * tx dboard dboard_base class + **********************************************************************/ +tx_dboard_base::tx_dboard_base(ctor_args_t args) : dboard_base(args){ + if (get_rx_id() != dboard_id_t::none()){ + throw uhd::runtime_error(str(boost::format( + "cannot create tx board when the rx id is \"%s\"" + " -> expected a rx id of \"%s\"" + ) % get_rx_id().to_pp_string() % dboard_id_t::none().to_pp_string())); + } +} + +tx_dboard_base::~tx_dboard_base(void){ + /* NOP */ +} + +void tx_dboard_base::rx_get(const wax::obj &, wax::obj &){ + throw uhd::runtime_error("cannot call rx_get on a tx dboard"); +} + +void tx_dboard_base::rx_set(const wax::obj &, const wax::obj &){ + throw uhd::runtime_error("cannot call rx_set on a tx dboard"); +} diff --git a/host/lib/usrp/dboard_ctor_args.hpp b/host/lib/usrp/dboard_ctor_args.hpp new file mode 100644 index 000000000..708f2ea08 --- /dev/null +++ b/host/lib/usrp/dboard_ctor_args.hpp @@ -0,0 +1,36 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_LIBUHD_USRP_DBOARD_CTOR_ARGS_HPP +#define INCLUDED_LIBUHD_USRP_DBOARD_CTOR_ARGS_HPP + +#include <uhd/usrp/dboard_id.hpp> +#include <uhd/usrp/dboard_base.hpp> +#include <uhd/usrp/dboard_iface.hpp> +#include <string> + +namespace uhd{ namespace usrp{ + + struct dboard_ctor_args_t{ + std::string sd_name; + dboard_iface::sptr db_iface; + dboard_id_t rx_id, tx_id; + }; + +}} //namespace + +#endif /* INCLUDED_LIBUHD_USRP_DBOARD_CTOR_ARGS_HPP */ diff --git a/host/lib/usrp/dboard_eeprom.cpp b/host/lib/usrp/dboard_eeprom.cpp new file mode 100644 index 000000000..c1e44fb74 --- /dev/null +++ b/host/lib/usrp/dboard_eeprom.cpp @@ -0,0 +1,154 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/usrp/dboard_eeprom.hpp> +#include <uhd/exception.hpp> +#include <boost/foreach.hpp> +#include <boost/format.hpp> +#include <algorithm> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; + +static const bool _dboard_eeprom_debug = false; + +/*********************************************************************** + * Utility functions + **********************************************************************/ + +//! create a string from a byte vector, return empty if invalid ascii +static const std::string bytes_to_string(const byte_vector_t &bytes){ + std::string out; + BOOST_FOREACH(boost::uint8_t byte, bytes){ + if (byte < 32 or byte > 127) return out; + out += byte; + } + return out; +} + +//! create a byte vector from a string, null terminate unless max length +static const byte_vector_t string_to_bytes(const std::string &string, size_t max_length){ + byte_vector_t bytes; + for (size_t i = 0; i < std::min(string.size(), max_length); i++){ + bytes.push_back(string[i]); + } + if (bytes.size() < max_length - 1) bytes.push_back('\0'); + return bytes; +} + +//////////////////////////////////////////////////////////////////////// +// format of daughterboard EEPROM +// 00: 0xDB code for ``I'm a daughterboard'' +// 01: .. Daughterboard ID (LSB) +// 02: .. Daughterboard ID (MSB) +// 03: .. io bits 7-0 direction (bit set if it's an output from m'board) +// 04: .. io bits 15-8 direction (bit set if it's an output from m'board) +// 05: .. ADC0 DC offset correction (LSB) +// 06: .. ADC0 DC offset correction (MSB) +// 07: .. ADC1 DC offset correction (LSB) +// 08: .. ADC1 DC offset correction (MSB) +// ... +// 1f: .. negative of the sum of bytes [0x00, 0x1e] + +#define DB_EEPROM_MAGIC 0x00 +#define DB_EEPROM_MAGIC_VALUE 0xDB +#define DB_EEPROM_ID_LSB 0x01 +#define DB_EEPROM_ID_MSB 0x02 +#define DB_EEPROM_OE_LSB 0x03 +#define DB_EEPROM_OE_MSB 0x04 +#define DB_EEPROM_OFFSET_0_LSB 0x05 // offset correction for ADC or DAC 0 +#define DB_EEPROM_OFFSET_0_MSB 0x06 +#define DB_EEPROM_OFFSET_1_LSB 0x07 // offset correction for ADC or DAC 1 +#define DB_EEPROM_OFFSET_1_MSB 0x08 +#define DB_EEPROM_SERIAL 0x09 +#define DB_EEPROM_SERIAL_LEN 0x09 //9 ASCII characters +#define DB_EEPROM_CHKSUM 0x1f + +#define DB_EEPROM_CLEN 0x20 // length of common portion of eeprom + +#define DB_EEPROM_CUSTOM_BASE DB_EEPROM_CLEN // first avail offset for + // daughterboard specific use +//////////////////////////////////////////////////////////////////////// + +//negative sum of bytes excluding checksum byte +static boost::uint8_t checksum(const byte_vector_t &bytes){ + int sum = 0; + for (size_t i = 0; i < std::min(bytes.size(), size_t(DB_EEPROM_CHKSUM)); i++){ + sum -= int(bytes.at(i)); + } + if (_dboard_eeprom_debug) + std::cout << boost::format("sum: 0x%02x") % sum << std::endl; + return boost::uint8_t(sum); +} + +dboard_eeprom_t::dboard_eeprom_t(void){ + id = dboard_id_t::none(); + serial = ""; +} + +void dboard_eeprom_t::load(i2c_iface &iface, boost::uint8_t addr){ + byte_vector_t bytes = iface.read_eeprom(addr, 0, DB_EEPROM_CLEN); + + if (_dboard_eeprom_debug){ + for (size_t i = 0; i < bytes.size(); i++){ + std::cout << boost::format( + "eeprom byte[0x%02x] = 0x%02x") % i % int(bytes.at(i) + ) << std::endl; + } + } + + try{ + UHD_ASSERT_THROW(bytes.size() >= DB_EEPROM_CLEN); + UHD_ASSERT_THROW(bytes[DB_EEPROM_MAGIC] == DB_EEPROM_MAGIC_VALUE); + UHD_ASSERT_THROW(bytes[DB_EEPROM_CHKSUM] == checksum(bytes)); + + //parse the ids + id = dboard_id_t::from_uint16(0 + | (boost::uint16_t(bytes[DB_EEPROM_ID_LSB]) << 0) + | (boost::uint16_t(bytes[DB_EEPROM_ID_MSB]) << 8) + ); + + //parse the serial + serial = bytes_to_string( + byte_vector_t(&bytes.at(DB_EEPROM_SERIAL), + &bytes.at(DB_EEPROM_SERIAL+DB_EEPROM_SERIAL_LEN)) + ); + + }catch(const uhd::assertion_error &){ + id = dboard_id_t::none(); + serial = ""; + } +} + +void dboard_eeprom_t::store(i2c_iface &iface, boost::uint8_t addr){ + byte_vector_t bytes(DB_EEPROM_CLEN, 0); //defaults to all zeros + bytes[DB_EEPROM_MAGIC] = DB_EEPROM_MAGIC_VALUE; + + //load the id bytes + bytes[DB_EEPROM_ID_LSB] = boost::uint8_t(id.to_uint16() >> 0); + bytes[DB_EEPROM_ID_MSB] = boost::uint8_t(id.to_uint16() >> 8); + + //load the serial bytes + byte_vector_t ser_bytes = string_to_bytes(serial, DB_EEPROM_SERIAL_LEN); + std::copy(ser_bytes.begin(), ser_bytes.end(), &bytes.at(DB_EEPROM_SERIAL)); + + //load the checksum + bytes[DB_EEPROM_CHKSUM] = checksum(bytes); + + iface.write_eeprom(addr, 0, bytes); +} diff --git a/host/lib/usrp/dboard_id.cpp b/host/lib/usrp/dboard_id.cpp new file mode 100644 index 000000000..3028d2a3b --- /dev/null +++ b/host/lib/usrp/dboard_id.cpp @@ -0,0 +1,68 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/usrp/dboard_id.hpp> +#include <boost/lexical_cast.hpp> +#include <boost/format.hpp> +#include <sstream> +#include <iostream> + +using namespace uhd::usrp; + +dboard_id_t::dboard_id_t(boost::uint16_t id){ + _id = id; +} + +dboard_id_t dboard_id_t::none(void){ + return dboard_id_t(); +} + +dboard_id_t dboard_id_t::from_uint16(boost::uint16_t uint16){ + return dboard_id_t(uint16); +} + +boost::uint16_t dboard_id_t::to_uint16(void) const{ + return _id; +} + +//used with lexical cast to parse a hex string +template <class T> struct to_hex{ + T value; + operator T() const {return value;} + friend std::istream& operator>>(std::istream& in, to_hex& out){ + in >> std::hex >> out.value; + return in; + } +}; + +dboard_id_t dboard_id_t::from_string(const std::string &string){ + if (string.substr(0, 2) == "0x"){ + return dboard_id_t::from_uint16(boost::lexical_cast<to_hex<boost::uint16_t> >(string)); + } + return dboard_id_t::from_uint16(boost::lexical_cast<boost::uint16_t>(string)); +} + +std::string dboard_id_t::to_string(void) const{ + return str(boost::format("0x%04x") % this->to_uint16()); +} + +//Note: to_pp_string is implemented in the dboard manager +//because it needs access to the dboard registration table + +bool uhd::usrp::operator==(const dboard_id_t &lhs, const dboard_id_t &rhs){ + return lhs.to_uint16() == rhs.to_uint16(); +} diff --git a/host/lib/usrp/dboard_iface.cpp b/host/lib/usrp/dboard_iface.cpp new file mode 100644 index 000000000..5cc5ea470 --- /dev/null +++ b/host/lib/usrp/dboard_iface.cpp @@ -0,0 +1,78 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/usrp/dboard_iface.hpp> +#include <uhd/types/dict.hpp> + +using namespace uhd::usrp; + +struct dboard_iface::impl{ + uhd::dict<unit_t, boost::uint16_t> pin_ctrl_shadow; + uhd::dict<unit_t, uhd::dict<atr_reg_t, boost::uint16_t> > atr_reg_shadow; + uhd::dict<unit_t, boost::uint16_t> gpio_ddr_shadow; + uhd::dict<unit_t, boost::uint16_t> gpio_out_shadow; +}; + +dboard_iface::dboard_iface(void){ + _impl = UHD_PIMPL_MAKE(impl, ()); +} + +template <typename T> +static T shadow_it(T &shadow, const T &value, const T &mask){ + shadow = (shadow & ~mask) | (value & mask); + return shadow; +} + +void dboard_iface::set_pin_ctrl( + unit_t unit, boost::uint16_t value, boost::uint16_t mask +){ + _set_pin_ctrl(unit, shadow_it(_impl->pin_ctrl_shadow[unit], value, mask)); +} + +boost::uint16_t dboard_iface::get_pin_ctrl(unit_t unit){ + return _impl->pin_ctrl_shadow[unit]; +} + +void dboard_iface::set_atr_reg( + unit_t unit, atr_reg_t reg, boost::uint16_t value, boost::uint16_t mask +){ + _set_atr_reg(unit, reg, shadow_it(_impl->atr_reg_shadow[unit][reg], value, mask)); +} + +boost::uint16_t dboard_iface::get_atr_reg(unit_t unit, atr_reg_t reg){ + return _impl->atr_reg_shadow[unit][reg]; +} + +void dboard_iface::set_gpio_ddr( + unit_t unit, boost::uint16_t value, boost::uint16_t mask +){ + _set_gpio_ddr(unit, shadow_it(_impl->gpio_ddr_shadow[unit], value, mask)); +} + +boost::uint16_t dboard_iface::get_gpio_ddr(unit_t unit){ + return _impl->gpio_ddr_shadow[unit]; +} + +void dboard_iface::set_gpio_out( + unit_t unit, boost::uint16_t value, boost::uint16_t mask +){ + _set_gpio_out(unit, shadow_it(_impl->gpio_out_shadow[unit], value, mask)); +} + +boost::uint16_t dboard_iface::get_gpio_out(unit_t unit){ + return _impl->gpio_out_shadow[unit]; +} diff --git a/host/lib/usrp/dboard_manager.cpp b/host/lib/usrp/dboard_manager.cpp new file mode 100644 index 000000000..9055905b1 --- /dev/null +++ b/host/lib/usrp/dboard_manager.cpp @@ -0,0 +1,357 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "dboard_ctor_args.hpp" +#include <uhd/usrp/dboard_manager.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/utils/warning.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/exception.hpp> +#include <uhd/types/dict.hpp> +#include <boost/tuple/tuple.hpp> +#include <boost/format.hpp> +#include <boost/bind.hpp> +#include <boost/foreach.hpp> +#include <boost/assign/list_of.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * storage and registering for dboards + **********************************************************************/ +//dboard registry tuple: dboard constructor, canonical name, subdev names +typedef boost::tuple<dboard_manager::dboard_ctor_t, std::string, prop_names_t> args_t; + +//map a dboard id to a dboard constructor +typedef uhd::dict<dboard_id_t, args_t> id_to_args_map_t; +UHD_SINGLETON_FCN(id_to_args_map_t, get_id_to_args_map) + +void dboard_manager::register_dboard( + const dboard_id_t &dboard_id, + dboard_ctor_t dboard_ctor, + const std::string &name, + const prop_names_t &subdev_names +){ + //std::cout << "registering: " << name << std::endl; + if (get_id_to_args_map().has_key(dboard_id)){ + throw uhd::key_error(str(boost::format( + "The dboard id %s is already registered to %s." + ) % dboard_id.to_string() % dboard_id.to_pp_string())); + } + get_id_to_args_map()[dboard_id] = args_t(dboard_ctor, name, subdev_names); +} + +//map an xcvr dboard id to its partner dboard id +typedef uhd::dict<dboard_id_t, dboard_id_t> xcvr_id_to_id_map_t; +UHD_SINGLETON_FCN(xcvr_id_to_id_map_t, get_xcvr_id_to_id_map) + +void dboard_manager::register_dboard( + const dboard_id_t &rx_dboard_id, + const dboard_id_t &tx_dboard_id, + dboard_ctor_t dboard_ctor, + const std::string &name, + const prop_names_t &subdev_names +){ + //regular registration for ids + register_dboard(rx_dboard_id, dboard_ctor, name, subdev_names); + register_dboard(tx_dboard_id, dboard_ctor, name, subdev_names); + + //register xcvr mapping for ids + get_xcvr_id_to_id_map()[rx_dboard_id] = tx_dboard_id; + get_xcvr_id_to_id_map()[tx_dboard_id] = rx_dboard_id; +} + +std::string dboard_id_t::to_cname(void) const{ + if (not get_id_to_args_map().has_key(*this)) return "Unknown"; + return get_id_to_args_map()[*this].get<1>(); +} + +std::string dboard_id_t::to_pp_string(void) const{ + return str(boost::format("%s (%s)") % this->to_cname() % this->to_string()); +} + +/*********************************************************************** + * internal helper classes + **********************************************************************/ +/*! + * A special wax proxy object that forwards calls to a subdev. + * A sptr to an instance will be used in the properties structure. + */ +class subdev_proxy : boost::noncopyable, public wax::obj{ +public: + typedef boost::shared_ptr<subdev_proxy> sptr; + enum type_t{RX_TYPE, TX_TYPE}; + + //structors + subdev_proxy(dboard_base::sptr subdev, type_t type): + _subdev(subdev), _type(type) + { + /* NOP */ + } + +private: + dboard_base::sptr _subdev; + type_t _type; + + //forward the get calls to the rx or tx + void get(const wax::obj &key, wax::obj &val){ + switch(_type){ + case RX_TYPE: return _subdev->rx_get(key, val); + case TX_TYPE: return _subdev->tx_get(key, val); + } + } + + //forward the set calls to the rx or tx + void set(const wax::obj &key, const wax::obj &val){ + switch(_type){ + case RX_TYPE: return _subdev->rx_set(key, val); + case TX_TYPE: return _subdev->tx_set(key, val); + } + } +}; + +/*********************************************************************** + * dboard manager implementation class + **********************************************************************/ +class dboard_manager_impl : public dboard_manager{ + +public: + dboard_manager_impl( + dboard_id_t rx_dboard_id, + dboard_id_t tx_dboard_id, + dboard_iface::sptr iface + ); + ~dboard_manager_impl(void); + + //dboard_iface + prop_names_t get_rx_subdev_names(void); + prop_names_t get_tx_subdev_names(void); + wax::obj get_rx_subdev(const std::string &subdev_name); + wax::obj get_tx_subdev(const std::string &subdev_name); + +private: + void init(dboard_id_t, dboard_id_t); + //list of rx and tx dboards in this dboard_manager + //each dboard here is actually a subdevice proxy + //the subdevice proxy is internal to the cpp file + uhd::dict<std::string, subdev_proxy::sptr> _rx_dboards; + uhd::dict<std::string, subdev_proxy::sptr> _tx_dboards; + dboard_iface::sptr _iface; + void set_nice_dboard_if(void); +}; + +/*********************************************************************** + * make routine for dboard manager + **********************************************************************/ +dboard_manager::sptr dboard_manager::make( + dboard_id_t rx_dboard_id, + dboard_id_t tx_dboard_id, + dboard_iface::sptr iface +){ + return dboard_manager::sptr( + new dboard_manager_impl(rx_dboard_id, tx_dboard_id, iface) + ); +} + +/*********************************************************************** + * implementation class methods + **********************************************************************/ +static args_t get_dboard_args( + dboard_iface::unit_t unit, + dboard_id_t dboard_id, + bool force_to_unknown = false +){ + //special case, the none id was provided, use the following ids + if (dboard_id == dboard_id_t::none() or force_to_unknown){ + UHD_ASSERT_THROW(get_id_to_args_map().has_key(0xfff1)); + UHD_ASSERT_THROW(get_id_to_args_map().has_key(0xfff0)); + switch(unit){ + case dboard_iface::UNIT_RX: return get_dboard_args(unit, 0xfff1); + case dboard_iface::UNIT_TX: return get_dboard_args(unit, 0xfff0); + default: UHD_THROW_INVALID_CODE_PATH(); + } + } + + //verify that there is a registered constructor for this id + if (not get_id_to_args_map().has_key(dboard_id)){ + uhd::warning::post(str(boost::format( + "Unknown dboard ID: %s.\n" + ) % dboard_id.to_pp_string())); + return get_dboard_args(unit, dboard_id, true); + } + + //return the dboard args for this id + return get_id_to_args_map()[dboard_id]; +} + +dboard_manager_impl::dboard_manager_impl( + dboard_id_t rx_dboard_id, + dboard_id_t tx_dboard_id, + dboard_iface::sptr iface +): + _iface(iface) +{ + try{ + this->init(rx_dboard_id, tx_dboard_id); + } + catch(const std::exception &e){ + uhd::warning::post(e.what()); + this->init(dboard_id_t::none(), dboard_id_t::none()); + } +} + +void dboard_manager_impl::init( + dboard_id_t rx_dboard_id, dboard_id_t tx_dboard_id +){ + //determine xcvr status + bool rx_dboard_is_xcvr = get_xcvr_id_to_id_map().has_key(rx_dboard_id); + bool tx_dboard_is_xcvr = get_xcvr_id_to_id_map().has_key(tx_dboard_id); + bool this_dboard_is_xcvr = ( + rx_dboard_is_xcvr and tx_dboard_is_xcvr and + (get_xcvr_id_to_id_map()[rx_dboard_id] == tx_dboard_id) and + (get_xcvr_id_to_id_map()[tx_dboard_id] == rx_dboard_id) + ); + + //warn for invalid dboard id xcvr combinations + if (rx_dboard_is_xcvr != this_dboard_is_xcvr or tx_dboard_is_xcvr != this_dboard_is_xcvr){ + uhd::warning::post(str(boost::format( + "Unknown transceiver board ID combination...\n" + "RX dboard ID: %s\n" + "TX dboard ID: %s\n" + ) % rx_dboard_id.to_pp_string() % tx_dboard_id.to_pp_string())); + } + + //extract dboard constructor and settings (force to unknown for messed up xcvr status) + dboard_ctor_t rx_dboard_ctor; std::string rx_name; prop_names_t rx_subdevs; + boost::tie(rx_dboard_ctor, rx_name, rx_subdevs) = get_dboard_args( + dboard_iface::UNIT_RX, rx_dboard_id, rx_dboard_is_xcvr != this_dboard_is_xcvr + ); + + dboard_ctor_t tx_dboard_ctor; std::string tx_name; prop_names_t tx_subdevs; + boost::tie(tx_dboard_ctor, tx_name, tx_subdevs) = get_dboard_args( + dboard_iface::UNIT_TX, tx_dboard_id, tx_dboard_is_xcvr != this_dboard_is_xcvr + ); + + //initialize the gpio pins before creating subdevs + set_nice_dboard_if(); + + //dboard constructor args + dboard_ctor_args_t db_ctor_args; + db_ctor_args.db_iface = _iface; + + //make xcvr subdevs (make one subdev for both rx and tx dboards) + if (this_dboard_is_xcvr){ + UHD_ASSERT_THROW(rx_dboard_ctor == tx_dboard_ctor); + UHD_ASSERT_THROW(rx_subdevs == tx_subdevs); + BOOST_FOREACH(const std::string &subdev, rx_subdevs){ + db_ctor_args.sd_name = subdev; + db_ctor_args.rx_id = rx_dboard_id; + db_ctor_args.tx_id = tx_dboard_id; + dboard_base::sptr xcvr_dboard = rx_dboard_ctor(&db_ctor_args); + //create a rx proxy for this xcvr board + _rx_dboards[subdev] = subdev_proxy::sptr( + new subdev_proxy(xcvr_dboard, subdev_proxy::RX_TYPE) + ); + //create a tx proxy for this xcvr board + _tx_dboards[subdev] = subdev_proxy::sptr( + new subdev_proxy(xcvr_dboard, subdev_proxy::TX_TYPE) + ); + } + } + + //make tx and rx subdevs (separate subdevs for rx and tx dboards) + else{ + //make the rx subdevs + BOOST_FOREACH(const std::string &subdev, rx_subdevs){ + db_ctor_args.sd_name = subdev; + db_ctor_args.rx_id = rx_dboard_id; + db_ctor_args.tx_id = dboard_id_t::none(); + dboard_base::sptr rx_dboard = rx_dboard_ctor(&db_ctor_args); + //create a rx proxy for this rx board + _rx_dboards[subdev] = subdev_proxy::sptr( + new subdev_proxy(rx_dboard, subdev_proxy::RX_TYPE) + ); + } + //make the tx subdevs + BOOST_FOREACH(const std::string &subdev, tx_subdevs){ + db_ctor_args.sd_name = subdev; + db_ctor_args.rx_id = dboard_id_t::none(); + db_ctor_args.tx_id = tx_dboard_id; + dboard_base::sptr tx_dboard = tx_dboard_ctor(&db_ctor_args); + //create a tx proxy for this tx board + _tx_dboards[subdev] = subdev_proxy::sptr( + new subdev_proxy(tx_dboard, subdev_proxy::TX_TYPE) + ); + } + } +} + +dboard_manager_impl::~dboard_manager_impl(void){ + set_nice_dboard_if(); +} + +prop_names_t dboard_manager_impl::get_rx_subdev_names(void){ + return _rx_dboards.keys(); +} + +prop_names_t dboard_manager_impl::get_tx_subdev_names(void){ + return _tx_dboards.keys(); +} + +wax::obj dboard_manager_impl::get_rx_subdev(const std::string &subdev_name){ + if (not _rx_dboards.has_key(subdev_name)) throw uhd::key_error( + str(boost::format("Unknown rx subdev name %s") % subdev_name) + ); + //get a link to the rx subdev proxy + return _rx_dboards[subdev_name]->get_link(); +} + +wax::obj dboard_manager_impl::get_tx_subdev(const std::string &subdev_name){ + if (not _tx_dboards.has_key(subdev_name)) throw uhd::key_error( + str(boost::format("Unknown tx subdev name %s") % subdev_name) + ); + //get a link to the tx subdev proxy + return _tx_dboards[subdev_name]->get_link(); +} + +void dboard_manager_impl::set_nice_dboard_if(void){ + //make a list of possible unit types + std::vector<dboard_iface::unit_t> units = boost::assign::list_of + (dboard_iface::UNIT_RX) + (dboard_iface::UNIT_TX) + ; + + //set nice settings on each unit + BOOST_FOREACH(dboard_iface::unit_t unit, units){ + _iface->set_gpio_ddr(unit, 0x0000); //all inputs + _iface->set_gpio_out(unit, 0x0000); //all low + _iface->set_pin_ctrl(unit, 0x0000); //all gpio + _iface->set_clock_enabled(unit, false); //clock off + } + + //disable all rx subdevices + BOOST_FOREACH(const std::string &sd_name, this->get_rx_subdev_names()){ + this->get_rx_subdev(sd_name)[SUBDEV_PROP_ENABLED] = false; + } + + //disable all tx subdevices + BOOST_FOREACH(const std::string &sd_name, this->get_tx_subdev_names()){ + this->get_tx_subdev(sd_name)[SUBDEV_PROP_ENABLED] = false; + } +} diff --git a/host/lib/usrp/dsp_utils.cpp b/host/lib/usrp/dsp_utils.cpp new file mode 100644 index 000000000..a3a557060 --- /dev/null +++ b/host/lib/usrp/dsp_utils.cpp @@ -0,0 +1,141 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/usrp/dsp_utils.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/exception.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/tuple/tuple.hpp> +#include <boost/math/special_functions/round.hpp> +#include <boost/math/special_functions/sign.hpp> +#include <algorithm> +#include <cmath> + +using namespace uhd; +using namespace uhd::usrp; + +template <class T> T ceil_log2(T num){ + return std::ceil(std::log(num)/std::log(T(2))); +} + +/*! + * 3 2 1 0 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-------------------------------+-------+-------+-------+-------+ + * | | DDC0Q | DDC0I | + * +-------------------------------+-------+-------+-------+-------+ + */ +boost::uint32_t dsp_type1::calc_rx_mux_word(subdev_conn_t subdev_conn){ + switch(subdev_conn){ + case SUBDEV_CONN_COMPLEX_IQ: return (0x1 << 4) | (0x0 << 0); //DDC0Q=ADC0Q, DDC0I=ADC0I + case SUBDEV_CONN_COMPLEX_QI: return (0x0 << 4) | (0x1 << 0); //DDC0Q=ADC0I, DDC0I=ADC0Q + case SUBDEV_CONN_REAL_I: return (0xf << 4) | (0x0 << 0); //DDC0Q=ZERO, DDC0I=ADC0I + case SUBDEV_CONN_REAL_Q: return (0xf << 4) | (0x1 << 0); //DDC0Q=ZERO, DDC0I=ADC0Q + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +/*! + * 3 2 1 0 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-------------------------------+-------+-------+-------+-------+ + * | | DAC0Q | DAC0I | + * +-------------------------------+-------+-------+-------+-------+ + */ +boost::uint32_t dsp_type1::calc_tx_mux_word(subdev_conn_t subdev_conn){ + switch(subdev_conn){ + case SUBDEV_CONN_COMPLEX_IQ: return (0x1 << 4) | (0x0 << 0); //DAC0Q=DUC0Q, DAC0I=DUC0I + case SUBDEV_CONN_COMPLEX_QI: return (0x0 << 4) | (0x1 << 0); //DAC0Q=DUC0I, DAC0I=DUC0Q + case SUBDEV_CONN_REAL_I: return (0xf << 4) | (0x0 << 0); //DAC0Q=ZERO, DAC0I=DUC0I + case SUBDEV_CONN_REAL_Q: return (0x0 << 4) | (0xf << 0); //DAC0Q=DUC0I, DAC0I=ZERO + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +boost::uint32_t dsp_type1::calc_cordic_word_and_update( + double &freq, double codec_rate +){ + //correct for outside of rate (wrap around) + freq = std::fmod(freq, codec_rate); + if (std::abs(freq) > codec_rate/2.0) + freq -= boost::math::sign(freq)*codec_rate; + + //calculate the freq register word (signed) + UHD_ASSERT_THROW(std::abs(freq) <= codec_rate/2.0); + static const double scale_factor = std::pow(2.0, 32); + boost::int32_t freq_word = boost::int32_t(boost::math::round((freq / codec_rate) * scale_factor)); + + //update the actual frequency + freq = (double(freq_word) / scale_factor) * codec_rate; + + return boost::uint32_t(freq_word); +} + +boost::uint32_t dsp_type1::calc_cic_filter_word(unsigned rate){ + int hb0 = 0, hb1 = 0; + if (not (rate & 0x1)){ + hb0 = 1; + rate /= 2; + } + if (not (rate & 0x1)){ + hb1 = 1; + rate /= 2; + } + return (hb1 << 9) | (hb0 << 8) | (rate & 0xff); +} + +boost::uint32_t dsp_type1::calc_iq_scale_word( + boost::int16_t i, boost::int16_t q +){ + return (boost::uint32_t(i) << 16) | (boost::uint32_t(q) << 0); +} + +boost::uint32_t dsp_type1::calc_iq_scale_word(unsigned rate){ + // Calculate CIC interpolation (i.e., without halfband interpolators) + unsigned tmp_rate = calc_cic_filter_word(rate) & 0xff; + + // Calculate closest multiplier constant to reverse gain absent scale multipliers + double rate_cubed = std::pow(double(tmp_rate), 3); + boost::int16_t scale = boost::math::iround((4096*std::pow(2, ceil_log2(rate_cubed)))/(1.65*rate_cubed)); + return calc_iq_scale_word(scale, scale); +} + +boost::uint32_t dsp_type1::calc_stream_cmd_word(const stream_cmd_t &stream_cmd){ + UHD_ASSERT_THROW(stream_cmd.num_samps <= 0x3fffffff); + + //setup the mode to instruction flags + typedef boost::tuple<bool, bool, bool> inst_t; + static const uhd::dict<stream_cmd_t::stream_mode_t, inst_t> mode_to_inst = boost::assign::map_list_of + //reload, chain, samps + (stream_cmd_t::STREAM_MODE_START_CONTINUOUS, inst_t(true, true, false)) + (stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS, inst_t(false, false, false)) + (stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE, inst_t(false, false, true)) + (stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_MORE, inst_t(false, true, true)) + ; + + //setup the instruction flag values + bool inst_reload, inst_chain, inst_samps; + boost::tie(inst_reload, inst_chain, inst_samps) = mode_to_inst[stream_cmd.stream_mode]; + + //calculate the word from flags and length + boost::uint32_t word = 0; + word |= boost::uint32_t((stream_cmd.stream_now)? 1 : 0) << 31; + word |= boost::uint32_t((inst_chain)? 1 : 0) << 30; + word |= boost::uint32_t((inst_reload)? 1 : 0) << 29; + word |= (inst_samps)? stream_cmd.num_samps : ((inst_chain)? 1 : 0); + return word; +} diff --git a/host/lib/usrp/gps_ctrl.cpp b/host/lib/usrp/gps_ctrl.cpp new file mode 100644 index 000000000..e0ab6de90 --- /dev/null +++ b/host/lib/usrp/gps_ctrl.cpp @@ -0,0 +1,201 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/usrp/gps_ctrl.hpp> +#include <uhd/exception.hpp> +#include <boost/cstdint.hpp> +#include <boost/date_time/posix_time/posix_time.hpp> +#include <boost/thread/thread.hpp> +#include <boost/algorithm/string/trim.hpp> +#include <boost/tokenizer.hpp> + +using namespace uhd; +using namespace boost::gregorian; +using namespace boost::posix_time; +using namespace boost::algorithm; + +/*! + * A GPS control for Jackson Labs devices (and other NMEA compatible GPS's) + */ + +//TODO: multiple baud rate support (requires mboard_impl changes for poking UART registers) +class gps_ctrl_impl : public gps_ctrl{ +public: + gps_ctrl_impl(gps_send_fn_t send, gps_recv_fn_t recv){ + _send = send; + _recv = recv; + + std::string reply; + bool i_heard_some_nmea = false, i_heard_something_weird = false; + + gps_type = GPS_TYPE_NONE; + +// set_uart_baud_rate(GPS_UART, 115200); + //first we look for a Jackson Labs Firefly (since that's what we sell with the USRP2+...) + + _recv(); //get whatever junk is in the rx buffer right now, and throw it away + _send("HAAAY GUYYYYS\n"); //to elicit a response from the Firefly + + //then we loop until we either timeout, or until we get a response that indicates we're a JL device + int timeout = GPS_TIMEOUT_TRIES; + while(timeout--) { + reply = safe_gps_read(); + if(trim_right_copy(reply) == "Command Error") { + gps_type = GPS_TYPE_JACKSON_LABS; + break; + } + else if(reply.substr(0, 3) == "$GP") i_heard_some_nmea = true; //but keep looking for that "Command Error" response + else if(reply.length() != 0) i_heard_something_weird = true; //probably wrong baud rate + boost::this_thread::sleep(boost::posix_time::milliseconds(200)); + } + + if((i_heard_some_nmea) && (gps_type != GPS_TYPE_JACKSON_LABS)) gps_type = GPS_TYPE_GENERIC_NMEA; + + //otherwise, we can try some other common baud rates looking to see if a GPS is connected (todo, later) + if((gps_type == GPS_TYPE_NONE) && i_heard_something_weird) { + std::cout << "GPS invalid reply \"" << reply << "\", assuming none available" << std::endl; + } + + bool found_gprmc = false; + + switch(gps_type) { + case GPS_TYPE_JACKSON_LABS: + std::cout << "Found a Jackson Labs GPS" << std::endl; + //issue some setup stuff so it spits out the appropriate data + //none of these should issue replies so we don't bother looking for them + //we have to sleep between commands because the JL device, despite not acking, takes considerable time to process each command. + boost::this_thread::sleep(boost::posix_time::milliseconds(FIREFLY_STUPID_DELAY_MS)); + _send("SYST:COMM:SER:ECHO OFF\n"); + boost::this_thread::sleep(boost::posix_time::milliseconds(FIREFLY_STUPID_DELAY_MS)); + _send("SYST:COMM:SER:PRO OFF\n"); + boost::this_thread::sleep(boost::posix_time::milliseconds(FIREFLY_STUPID_DELAY_MS)); + _send("GPS:GPGGA 0\n"); + boost::this_thread::sleep(boost::posix_time::milliseconds(FIREFLY_STUPID_DELAY_MS)); + _send("GPS:GGAST 0\n"); + boost::this_thread::sleep(boost::posix_time::milliseconds(FIREFLY_STUPID_DELAY_MS)); + _send("GPS:GPRMC 1\n"); + boost::this_thread::sleep(boost::posix_time::milliseconds(FIREFLY_STUPID_DELAY_MS)); + +// break; + + case GPS_TYPE_GENERIC_NMEA: + if(gps_type == GPS_TYPE_GENERIC_NMEA) std::cout << "Found a generic NMEA GPS device" << std::endl; + found_gprmc = false; + //here we loop around looking for a GPRMC packet. if we don't get one, we don't have a usable GPS. + timeout = GPS_TIMEOUT_TRIES; + while(timeout--) { + reply = safe_gps_read(); + if(reply.substr(0, 6) == "$GPRMC") { + found_gprmc = true; + break; + } + boost::this_thread::sleep(boost::posix_time::milliseconds(200)); + } + if(!found_gprmc) { + if(gps_type == GPS_TYPE_JACKSON_LABS) std::cout << "Firefly GPS not locked or warming up." << std::endl; + else std::cout << "GPS does not output GPRMC packets. Cannot retrieve time." << std::endl; + gps_type = GPS_TYPE_NONE; + } + break; + + case GPS_TYPE_NONE: + default: + break; + + } + + + } + + ~gps_ctrl_impl(void){ + + } + +//TODO: this isn't generalizeable to non-USRP2 USRPs. + std::string safe_gps_read() { + return _recv(); + } + + ptime get_time(void) { + std::string reply; + ptime now; + boost::tokenizer<boost::escaped_list_separator<char> > tok(reply); + std::vector<std::string> toked; + int timeout = GPS_TIMEOUT_TRIES; + bool found_gprmc = false; + switch(gps_type) { + case GPS_TYPE_JACKSON_LABS: //deprecated in favor of a single NMEA parser + case GPS_TYPE_GENERIC_NMEA: + + while(timeout--) { + reply = safe_gps_read(); + if(reply.substr(0, 6) == "$GPRMC") { + found_gprmc = true; + break; + } + } + UHD_ASSERT_THROW(found_gprmc); + + tok.assign(reply); + toked.assign(tok.begin(), tok.end()); + + UHD_ASSERT_THROW(toked.size() == 11); //if it's not we got something weird in there + + now = ptime( date( + greg_year(boost::lexical_cast<int>(toked[8].substr(4, 2)) + 2000), //just trust me on this one + greg_month(boost::lexical_cast<int>(toked[8].substr(2, 2))), + greg_day(boost::lexical_cast<int>(toked[8].substr(0, 2))) + ), + hours( boost::lexical_cast<int>(toked[1].substr(0, 2))) + + minutes(boost::lexical_cast<int>(toked[1].substr(2, 2))) + + seconds(boost::lexical_cast<int>(toked[1].substr(4, 2))) + ); + break; + case GPS_TYPE_NONE: + default: + throw uhd::runtime_error("get_time(): Unsupported GPS or no GPS detected\n"); + break; + } + return now; + } + + bool gps_detected(void) { + return (gps_type != GPS_TYPE_NONE); + } + +private: + gps_send_fn_t _send; + gps_recv_fn_t _recv; + + enum { + GPS_TYPE_JACKSON_LABS, + GPS_TYPE_GENERIC_NMEA, + GPS_TYPE_NONE + } gps_type; + + static const int GPS_TIMEOUT_TRIES = 10; + static const int GPS_TIMEOUT_DELAY_MS = 200; + static const int FIREFLY_STUPID_DELAY_MS = 200; + +}; + +/*********************************************************************** + * Public make function for the GPS control + **********************************************************************/ +gps_ctrl::sptr gps_ctrl::make(gps_send_fn_t send, gps_recv_fn_t recv){ + return sptr(new gps_ctrl_impl(send, recv)); +} diff --git a/host/lib/usrp/mboard_eeprom.cpp b/host/lib/usrp/mboard_eeprom.cpp new file mode 100644 index 000000000..c90f4a2db --- /dev/null +++ b/host/lib/usrp/mboard_eeprom.cpp @@ -0,0 +1,292 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/usrp/mboard_eeprom.hpp> +#include <uhd/types/mac_addr.hpp> +#include <uhd/utils/byteswap.hpp> +#include <boost/asio/ip/address_v4.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/lexical_cast.hpp> +#include <boost/foreach.hpp> +#include <algorithm> +#include <cstddef> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * Constants + **********************************************************************/ +static const size_t SERIAL_LEN = 9; +static const size_t NAME_MAX_LEN = 32 - SERIAL_LEN; + +/*********************************************************************** + * Utility functions + **********************************************************************/ + +//! A wrapper around std::copy that takes ranges instead of iterators. +template<typename RangeSrc, typename RangeDst> inline +void byte_copy(const RangeSrc &src, RangeDst &dst){ + std::copy(boost::begin(src), boost::end(src), boost::begin(dst)); +} + +//! create a string from a byte vector, return empty if invalid ascii +static const std::string bytes_to_string(const byte_vector_t &bytes){ + std::string out; + BOOST_FOREACH(boost::uint8_t byte, bytes){ + if (byte < 32 or byte > 127) return out; + out += byte; + } + return out; +} + +//! create a byte vector from a string, null terminate unless max length +static const byte_vector_t string_to_bytes(const std::string &string, size_t max_length){ + byte_vector_t bytes; + for (size_t i = 0; i < std::min(string.size(), max_length); i++){ + bytes.push_back(string[i]); + } + if (bytes.size() < max_length - 1) bytes.push_back('\0'); + return bytes; +} + +/*********************************************************************** + * Implementation of N100 load/store + **********************************************************************/ +static const boost::uint8_t N100_EEPROM_ADDR = 0x50; + +static const uhd::dict<std::string, boost::uint8_t> USRP_N100_OFFSETS = boost::assign::map_list_of + ("rev-lsb-msb", 0x00) + ("mac-addr", 0x02) + ("ip-addr", 0x0C) + //leave space here for other addresses (perhaps) + ("serial", 0x18) + ("name", 0x18 + SERIAL_LEN) +; + +static void load_n100(mboard_eeprom_t &mb_eeprom, i2c_iface &iface){ + //extract the revision number + byte_vector_t rev_lsb_msb = iface.read_eeprom(N100_EEPROM_ADDR, USRP_N100_OFFSETS["rev-lsb-msb"], 2); + boost::uint16_t rev = (boost::uint16_t(rev_lsb_msb.at(0)) << 0) | (boost::uint16_t(rev_lsb_msb.at(1)) << 8); + mb_eeprom["rev"] = boost::lexical_cast<std::string>(rev); + + //extract the addresses + mb_eeprom["mac-addr"] = mac_addr_t::from_bytes(iface.read_eeprom( + N100_EEPROM_ADDR, USRP_N100_OFFSETS["mac-addr"], 6 + )).to_string(); + + boost::asio::ip::address_v4::bytes_type ip_addr_bytes; + byte_copy(iface.read_eeprom(N100_EEPROM_ADDR, USRP_N100_OFFSETS["ip-addr"], 4), ip_addr_bytes); + mb_eeprom["ip-addr"] = boost::asio::ip::address_v4(ip_addr_bytes).to_string(); + + //extract the serial + mb_eeprom["serial"] = bytes_to_string(iface.read_eeprom( + N100_EEPROM_ADDR, USRP_N100_OFFSETS["serial"], SERIAL_LEN + )); + + //extract the name + mb_eeprom["name"] = bytes_to_string(iface.read_eeprom( + N100_EEPROM_ADDR, USRP_N100_OFFSETS["name"], NAME_MAX_LEN + )); + + //Empty serial correction: use the mac address to determine serial. + //Older usrp2 models don't have a serial burned into EEPROM. + //The lower mac address bits will function as the serial number. + if (mb_eeprom["serial"].empty()){ + byte_vector_t mac_addr_bytes = mac_addr_t::from_string(mb_eeprom["mac-addr"]).to_bytes(); + unsigned serial = mac_addr_bytes.at(5) | (unsigned(mac_addr_bytes.at(4) & 0x0f) << 8); + mb_eeprom["serial"] = boost::lexical_cast<std::string>(serial); + } +} + +static void store_n100(const mboard_eeprom_t &mb_eeprom, i2c_iface &iface){ + //parse the revision number + if (mb_eeprom.has_key("rev")){ + boost::uint16_t rev = boost::lexical_cast<boost::uint16_t>(mb_eeprom["rev"]); + byte_vector_t rev_lsb_msb = boost::assign::list_of + (boost::uint8_t(rev >> 0)) + (boost::uint8_t(rev >> 8)) + ; + iface.write_eeprom(N100_EEPROM_ADDR, USRP_N100_OFFSETS["rev-lsb-msb"], rev_lsb_msb); + } + + //store the addresses + if (mb_eeprom.has_key("mac-addr")) iface.write_eeprom( + N100_EEPROM_ADDR, USRP_N100_OFFSETS["mac-addr"], + mac_addr_t::from_string(mb_eeprom["mac-addr"]).to_bytes() + ); + + if (mb_eeprom.has_key("ip-addr")){ + byte_vector_t ip_addr_bytes(4); + byte_copy(boost::asio::ip::address_v4::from_string(mb_eeprom["ip-addr"]).to_bytes(), ip_addr_bytes); + iface.write_eeprom(N100_EEPROM_ADDR, USRP_N100_OFFSETS["ip-addr"], ip_addr_bytes); + } + + //store the serial + if (mb_eeprom.has_key("serial")) iface.write_eeprom( + N100_EEPROM_ADDR, USRP_N100_OFFSETS["serial"], + string_to_bytes(mb_eeprom["serial"], SERIAL_LEN) + ); + + //store the name + if (mb_eeprom.has_key("name")) iface.write_eeprom( + N100_EEPROM_ADDR, USRP_N100_OFFSETS["name"], + string_to_bytes(mb_eeprom["name"], NAME_MAX_LEN) + ); +} + +/*********************************************************************** + * Implementation of B000 load/store + **********************************************************************/ +static const boost::uint8_t B000_EEPROM_ADDR = 0x50; +static const size_t B000_SERIAL_LEN = 8; + +static const uhd::dict<std::string, boost::uint8_t> USRP_B000_OFFSETS = boost::assign::map_list_of + ("serial", 0xf8) + ("name", 0xf8 - NAME_MAX_LEN) +; + +static void load_b000(mboard_eeprom_t &mb_eeprom, i2c_iface &iface){ + //extract the serial + mb_eeprom["serial"] = bytes_to_string(iface.read_eeprom( + B000_EEPROM_ADDR, USRP_B000_OFFSETS["serial"], B000_SERIAL_LEN + )); + + //extract the name + mb_eeprom["name"] = bytes_to_string(iface.read_eeprom( + B000_EEPROM_ADDR, USRP_B000_OFFSETS["name"], NAME_MAX_LEN + )); +} + +static void store_b000(const mboard_eeprom_t &mb_eeprom, i2c_iface &iface){ + //store the serial + if (mb_eeprom.has_key("serial")) iface.write_eeprom( + B000_EEPROM_ADDR, USRP_B000_OFFSETS["serial"], + string_to_bytes(mb_eeprom["serial"], B000_SERIAL_LEN) + ); + + //store the name + if (mb_eeprom.has_key("name")) iface.write_eeprom( + B000_EEPROM_ADDR, USRP_B000_OFFSETS["name"], + string_to_bytes(mb_eeprom["name"], NAME_MAX_LEN) + ); +} +/*********************************************************************** + * Implementation of E100 load/store + **********************************************************************/ +static const boost::uint8_t E100_EEPROM_ADDR = 0x51; + +struct e100_eeprom_map{ + boost::uint16_t vendor; + boost::uint16_t device; + unsigned char revision; + unsigned char content; + unsigned char model[8]; + unsigned char env_var[16]; + unsigned char env_setting[64]; + unsigned char serial[10]; + unsigned char name[NAME_MAX_LEN]; +}; + +template <typename T> static const byte_vector_t to_bytes(const T &item){ + return byte_vector_t( + reinterpret_cast<const byte_vector_t::value_type *>(&item), + reinterpret_cast<const byte_vector_t::value_type *>(&item)+sizeof(item) + ); +} + +#define sizeof_member(struct_name, member_name) \ + sizeof(reinterpret_cast<struct_name*>(NULL)->member_name) + +static void load_e100(mboard_eeprom_t &mb_eeprom, i2c_iface &iface){ + const size_t num_bytes = offsetof(e100_eeprom_map, model); + byte_vector_t map_bytes = iface.read_eeprom(E100_EEPROM_ADDR, 0, num_bytes); + e100_eeprom_map map; std::memcpy(&map, &map_bytes[0], map_bytes.size()); + + mb_eeprom["vendor"] = boost::lexical_cast<std::string>(uhd::ntohx(map.vendor)); + mb_eeprom["device"] = boost::lexical_cast<std::string>(uhd::ntohx(map.device)); + mb_eeprom["revision"] = boost::lexical_cast<std::string>(unsigned(map.revision)); + mb_eeprom["content"] = boost::lexical_cast<std::string>(unsigned(map.content)); + + #define load_e100_string_xx(key) mb_eeprom[#key] = bytes_to_string(iface.read_eeprom( \ + E100_EEPROM_ADDR, offsetof(e100_eeprom_map, key), sizeof_member(e100_eeprom_map, key) \ + )); + + load_e100_string_xx(model); + load_e100_string_xx(env_var); + load_e100_string_xx(env_setting); + load_e100_string_xx(serial); + load_e100_string_xx(name); +} + +static void store_e100(const mboard_eeprom_t &mb_eeprom, i2c_iface &iface){ + + if (mb_eeprom.has_key("vendor")) iface.write_eeprom( + E100_EEPROM_ADDR, offsetof(e100_eeprom_map, vendor), + to_bytes(uhd::htonx(boost::lexical_cast<boost::uint16_t>(mb_eeprom["vendor"]))) + ); + + if (mb_eeprom.has_key("device")) iface.write_eeprom( + E100_EEPROM_ADDR, offsetof(e100_eeprom_map, device), + to_bytes(uhd::htonx(boost::lexical_cast<boost::uint16_t>(mb_eeprom["device"]))) + ); + + if (mb_eeprom.has_key("revision")) iface.write_eeprom( + E100_EEPROM_ADDR, offsetof(e100_eeprom_map, revision), + byte_vector_t(1, boost::lexical_cast<unsigned>(mb_eeprom["revision"])) + ); + + if (mb_eeprom.has_key("content")) iface.write_eeprom( + E100_EEPROM_ADDR, offsetof(e100_eeprom_map, content), + byte_vector_t(1, boost::lexical_cast<unsigned>(mb_eeprom["content"])) + ); + + #define store_e100_string_xx(key) if (mb_eeprom.has_key(#key)) iface.write_eeprom( \ + E100_EEPROM_ADDR, offsetof(e100_eeprom_map, key), \ + string_to_bytes(mb_eeprom[#key], sizeof_member(e100_eeprom_map, key)) \ + ); + + store_e100_string_xx(model); + store_e100_string_xx(env_var); + store_e100_string_xx(env_setting); + store_e100_string_xx(serial); + store_e100_string_xx(name); + +} + +/*********************************************************************** + * Implementation of mboard eeprom + **********************************************************************/ +mboard_eeprom_t::mboard_eeprom_t(void){ + /* NOP */ +} + +mboard_eeprom_t::mboard_eeprom_t(i2c_iface &iface, map_type map){ + switch(map){ + case MAP_N100: load_n100(*this, iface); break; + case MAP_B000: load_b000(*this, iface); break; + case MAP_E100: load_e100(*this, iface); break; + } +} + +void mboard_eeprom_t::commit(i2c_iface &iface, map_type map){ + switch(map){ + case MAP_N100: store_n100(*this, iface); break; + case MAP_B000: store_b000(*this, iface); break; + case MAP_E100: store_e100(*this, iface); break; + } +} diff --git a/host/lib/usrp/misc_utils.cpp b/host/lib/usrp/misc_utils.cpp new file mode 100644 index 000000000..ddcad41cf --- /dev/null +++ b/host/lib/usrp/misc_utils.cpp @@ -0,0 +1,225 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/usrp/misc_utils.hpp> +#include <uhd/utils/assert_has.hpp> +#include <uhd/utils/algorithm.hpp> +#include <uhd/utils/gain_group.hpp> +#include <uhd/usrp/dboard_eeprom.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/usrp/mboard_props.hpp> +#include <uhd/usrp/dboard_props.hpp> +#include <uhd/usrp/codec_props.hpp> +#include <boost/bind.hpp> +#include <boost/foreach.hpp> +#include <boost/format.hpp> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * codec gain group helper functions: + * do this so we dont have to bind a templated function + **********************************************************************/ +static gain_range_t get_codec_gain_range(wax::obj codec, const std::string &name){ + return codec[named_prop_t(CODEC_PROP_GAIN_RANGE, name)].as<gain_range_t>(); +} + +static double get_codec_gain_i(wax::obj codec, const std::string &name){ + return codec[named_prop_t(CODEC_PROP_GAIN_I, name)].as<double>(); +} + +static double get_codec_gain_q(wax::obj codec, const std::string &name){ + return codec[named_prop_t(CODEC_PROP_GAIN_Q, name)].as<double>(); +} + +static void set_codec_gain_both(wax::obj codec, const std::string &name, double gain){ + codec[named_prop_t(CODEC_PROP_GAIN_I, name)] = gain; + codec[named_prop_t(CODEC_PROP_GAIN_Q, name)] = gain; +} + +static void set_codec_gain_i(wax::obj codec, const std::string &name, double gain){ + codec[named_prop_t(CODEC_PROP_GAIN_I, name)] = gain; +} + +static void set_codec_gain_q(wax::obj codec, const std::string &name, double gain){ + codec[named_prop_t(CODEC_PROP_GAIN_Q, name)] = gain; +} + +/*********************************************************************** + * subdev gain group helper functions: + * do this so we dont have to bind a templated function + **********************************************************************/ +static double get_subdev_gain(wax::obj subdev, const std::string &name){ + return subdev[named_prop_t(SUBDEV_PROP_GAIN, name)].as<double>(); +} + +static gain_range_t get_subdev_gain_range(wax::obj subdev, const std::string &name){ + return subdev[named_prop_t(SUBDEV_PROP_GAIN_RANGE, name)].as<gain_range_t>(); +} + +static void set_subdev_gain(wax::obj subdev, const std::string &name, double gain){ + subdev[named_prop_t(SUBDEV_PROP_GAIN, name)] = gain; +} + +/*********************************************************************** + * gain group factory function for usrp + **********************************************************************/ +gain_group::sptr usrp::make_gain_group( + const dboard_id_t &dboard_id, + wax::obj subdev, wax::obj codec, + gain_group_policy_t gain_group_policy +){ + const size_t subdev_gain_priority = 1; + const size_t codec_gain_priority = (gain_group_policy == GAIN_GROUP_POLICY_RX)? + (subdev_gain_priority - 1): //RX policy, codec gains fill last (lower priority) + (subdev_gain_priority + 1); //TX policy, codec gains fill first (higher priority) + const std::string subdev_prefix = dboard_id.to_cname() + "-"; + const std::string codec_prefix = (gain_group_policy == GAIN_GROUP_POLICY_RX)? "ADC-" : "DAC-"; + + gain_group::sptr gg = gain_group::make(); + gain_fcns_t fcns; + //add all the subdev gains first (antenna to dsp order) + BOOST_FOREACH(const std::string &name, subdev[SUBDEV_PROP_GAIN_NAMES].as<prop_names_t>()){ + fcns.get_range = boost::bind(&get_subdev_gain_range, subdev, name); + fcns.get_value = boost::bind(&get_subdev_gain, subdev, name); + fcns.set_value = boost::bind(&set_subdev_gain, subdev, name, _1); + gg->register_fcns(subdev_prefix+name, fcns, subdev_gain_priority); + } + //add all the codec gains last (antenna to dsp order) + BOOST_FOREACH(const std::string &name, codec[CODEC_PROP_GAIN_NAMES].as<prop_names_t>()){ + fcns.get_range = boost::bind(&get_codec_gain_range, codec, name); + + //register the value functions depending upon the connection type + switch(subdev[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>()){ + case SUBDEV_CONN_COMPLEX_IQ: + case SUBDEV_CONN_COMPLEX_QI: + fcns.get_value = boost::bind(&get_codec_gain_i, codec, name); //same as Q + fcns.set_value = boost::bind(&set_codec_gain_both, codec, name, _1); //sets both + break; + + case SUBDEV_CONN_REAL_I: + fcns.get_value = boost::bind(&get_codec_gain_i, codec, name); + fcns.set_value = boost::bind(&set_codec_gain_i, codec, name, _1); + break; + + case SUBDEV_CONN_REAL_Q: + fcns.get_value = boost::bind(&get_codec_gain_q, codec, name); + fcns.set_value = boost::bind(&set_codec_gain_q, codec, name, _1); + break; + } + gg->register_fcns(codec_prefix+name, fcns, codec_gain_priority); + } + return gg; +} + +/*********************************************************************** + * verify subdev specs + **********************************************************************/ +static void verify_xx_subdev_spec( + mboard_prop_t dboard_names_prop, + mboard_prop_t dboard_prop, + subdev_spec_t &subdev_spec, + wax::obj mboard, + std::string xx_type +){ + try{ + prop_names_t dboard_names = mboard[dboard_names_prop].as<prop_names_t>(); + UHD_ASSERT_THROW(dboard_names.size() > 0); //well i hope there is a dboard + + //the subdevice specification is empty: handle automatic + if (subdev_spec.empty()){ + BOOST_FOREACH(const std::string &db_name, dboard_names){ + wax::obj dboard = mboard[named_prop_t(dboard_prop, db_name)]; + + //if the dboard slot is populated, take the first subdevice + if (dboard[DBOARD_PROP_DBOARD_EEPROM].as<dboard_eeprom_t>().id != dboard_id_t::none()){ + std::string sd_name = dboard[DBOARD_PROP_SUBDEV_NAMES].as<prop_names_t>().front(); + subdev_spec.push_back(subdev_spec_pair_t(db_name, sd_name)); + break; + } + } + + //didnt find any populated dboards: add the first subdevice + if (subdev_spec.empty()){ + std::string db_name = dboard_names.front(); + wax::obj dboard = mboard[named_prop_t(dboard_prop, db_name)]; + std::string sd_name = dboard[DBOARD_PROP_SUBDEV_NAMES].as<prop_names_t>().front(); + subdev_spec.push_back(subdev_spec_pair_t(db_name, sd_name)); + } + } + + //sanity check that the dboard/subdevice names exist for this mboard + BOOST_FOREACH(subdev_spec_pair_t &pair, subdev_spec){ + //empty db name means select dboard automatically + if (pair.db_name.empty()){ + if (dboard_names.size() != 1) throw uhd::value_error( + "A daughterboard name must be provided for multi-slot motherboards: " + subdev_spec.to_string() + ); + pair.db_name = dboard_names.front(); + } + uhd::assert_has(dboard_names, pair.db_name, xx_type + " dboard name"); + wax::obj dboard = mboard[named_prop_t(dboard_prop, pair.db_name)]; + prop_names_t subdev_names = dboard[DBOARD_PROP_SUBDEV_NAMES].as<prop_names_t>(); + + //empty sd name means select the subdev automatically + if (pair.sd_name.empty()){ + if (subdev_names.size() != 1) throw uhd::value_error( + "A subdevice name must be provided for multi-subdev daughterboards: " + subdev_spec.to_string() + ); + pair.sd_name = subdev_names.front(); + } + uhd::assert_has(subdev_names, pair.sd_name, xx_type + " subdev name"); + } + }catch(const std::exception &e){ + throw uhd::value_error(str(boost::format( + "Validate %s subdev spec failed: %s\n %s" + ) % xx_type % subdev_spec.to_string() % e.what())); + } + + //now use the subdev spec to enable the subdevices in use and vice-versa + BOOST_FOREACH(const std::string &db_name, mboard[dboard_names_prop].as<prop_names_t>()){ + wax::obj dboard = mboard[named_prop_t(dboard_prop, db_name)]; + BOOST_FOREACH(const std::string &sd_name, dboard[DBOARD_PROP_SUBDEV_NAMES].as<prop_names_t>()){ + try{ + bool enable = uhd::has(subdev_spec, subdev_spec_pair_t(db_name, sd_name)); + dboard[named_prop_t(DBOARD_PROP_SUBDEV, sd_name)][SUBDEV_PROP_ENABLED] = enable; + } + catch(const std::exception &e){ + throw uhd::runtime_error(str(boost::format( + "Cannot set enabled property on subdevice %s:%s\n %s" + ) % db_name % sd_name % e.what())); + } + } + } +} + +void usrp::verify_rx_subdev_spec(subdev_spec_t &subdev_spec, wax::obj mboard){ + return verify_xx_subdev_spec( + MBOARD_PROP_RX_DBOARD_NAMES, + MBOARD_PROP_RX_DBOARD, + subdev_spec, mboard, "rx" + ); +} + +void usrp::verify_tx_subdev_spec(subdev_spec_t &subdev_spec, wax::obj mboard){ + return verify_xx_subdev_spec( + MBOARD_PROP_TX_DBOARD_NAMES, + MBOARD_PROP_TX_DBOARD, + subdev_spec, mboard, "tx" + ); +} diff --git a/host/lib/usrp/multi_usrp.cpp b/host/lib/usrp/multi_usrp.cpp new file mode 100644 index 000000000..83cbf339b --- /dev/null +++ b/host/lib/usrp/multi_usrp.cpp @@ -0,0 +1,561 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/usrp/multi_usrp.hpp> +#include <uhd/usrp/tune_helper.hpp> +#include <uhd/usrp/mboard_iface.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/warning.hpp> +#include <uhd/utils/gain_group.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/usrp/mboard_props.hpp> +#include <uhd/usrp/device_props.hpp> +#include <uhd/usrp/dboard_props.hpp> +#include <uhd/usrp/dsp_props.hpp> +#include <boost/thread.hpp> +#include <boost/foreach.hpp> +#include <boost/format.hpp> +#include <iostream> +#include <cmath> + +using namespace uhd; +using namespace uhd::usrp; + +const std::string multi_usrp::ALL_GAINS = ""; + +/*********************************************************************** + * Helper methods + **********************************************************************/ +static inline uhd::freq_range_t add_dsp_shift( + const uhd::freq_range_t &range, + wax::obj dsp +){ + double codec_rate = dsp[uhd::usrp::DSP_PROP_CODEC_RATE].as<double>(); + return uhd::freq_range_t(range.start() - codec_rate/2.0, range.stop() + codec_rate/2.0); +} + +static inline void do_samp_rate_warning_message( + double target_rate, + double actual_rate, + const std::string &xx +){ + static const double max_allowed_error = 1.0; //Sps + if (std::abs(target_rate - actual_rate) > max_allowed_error){ + uhd::warning::post(str(boost::format( + "The hardware does not support the requested %s sample rate:\n" + "Target sample rate: %f MSps\n" + "Actual sample rate: %f MSps\n" + ) % xx % (target_rate/1e6) % (actual_rate/1e6))); + } +} + +static inline void do_tune_freq_warning_message( + double target_freq, + double actual_freq, + const std::string &xx +){ + static const double max_allowed_error = 1.0; //Hz + if (std::abs(target_freq - actual_freq) > max_allowed_error){ + uhd::warning::post(str(boost::format( + "The hardware does not support the requested %s frequency:\n" + "Target frequency: %f MHz\n" + "Actual frequency: %f MHz\n" + ) % xx % (target_freq/1e6) % (actual_freq/1e6))); + } +} + +/*********************************************************************** + * Multi USRP Implementation + **********************************************************************/ +class multi_usrp_impl : public multi_usrp{ +public: + multi_usrp_impl(const device_addr_t &addr){ + _dev = device::make(addr); + } + + device::sptr get_device(void){ + return _dev; + } + + /******************************************************************* + * Mboard methods + ******************************************************************/ + void set_master_clock_rate(double rate, size_t mboard){ + if (mboard != ALL_MBOARDS){ + _mboard(mboard)[MBOARD_PROP_CLOCK_RATE] = rate; + return; + } + for (size_t m = 0; m < get_num_mboards(); m++){ + set_master_clock_rate(rate, m); + } + } + + double get_master_clock_rate(size_t mboard){ + return _mboard(mboard)[MBOARD_PROP_CLOCK_RATE].as<double>(); + } + + std::string get_pp_string(void){ + std::string buff = str(boost::format( + "%s USRP:\n" + " Device: %s\n" + ) + % ((get_num_mboards() > 1)? "Multi" : "Single") + % (*_dev)[DEVICE_PROP_NAME].as<std::string>() + ); + for (size_t m = 0; m < get_num_mboards(); m++){ + buff += str(boost::format( + " Mboard %d: %s\n" + ) % m + % _mboard(m)[MBOARD_PROP_NAME].as<std::string>() + ); + } + + //----------- rx side of life ---------------------------------- + for (size_t m = 0, chan = 0; m < get_num_mboards(); m++){ + for (; chan < (m + 1)*get_rx_subdev_spec(m).size(); chan++){ + buff += str(boost::format( + " RX Channel: %u\n" + " RX DSP: %s\n" + " RX Dboard: %s\n" + " RX Subdev: %s\n" + ) % chan + % _rx_dsp(chan)[DSP_PROP_NAME].as<std::string>() + % _rx_dboard(chan)[DBOARD_PROP_NAME].as<std::string>() + % _rx_subdev(chan)[SUBDEV_PROP_NAME].as<std::string>() + ); + } + } + + //----------- tx side of life ---------------------------------- + for (size_t m = 0, chan = 0; m < get_num_mboards(); m++){ + for (; chan < (m + 1)*get_tx_subdev_spec(m).size(); chan++){ + buff += str(boost::format( + " TX Channel: %u\n" + " TX DSP: %s\n" + " TX Dboard: %s\n" + " TX Subdev: %s\n" + ) % chan + % _tx_dsp(chan)[DSP_PROP_NAME].as<std::string>() + % _tx_dboard(chan)[DBOARD_PROP_NAME].as<std::string>() + % _tx_subdev(chan)[SUBDEV_PROP_NAME].as<std::string>() + ); + } + } + + return buff; + } + + std::string get_mboard_name(size_t mboard){ + return _mboard(mboard)[MBOARD_PROP_NAME].as<std::string>(); + } + + time_spec_t get_time_now(size_t mboard = 0){ + return _mboard(mboard)[MBOARD_PROP_TIME_NOW].as<time_spec_t>(); + } + + time_spec_t get_time_last_pps(size_t mboard = 0){ + return _mboard(mboard)[MBOARD_PROP_TIME_PPS].as<time_spec_t>(); + } + + void set_time_now(const time_spec_t &time_spec, size_t mboard){ + if (mboard != ALL_MBOARDS){ + _mboard(mboard)[MBOARD_PROP_TIME_NOW] = time_spec; + return; + } + for (size_t m = 0; m < get_num_mboards(); m++){ + set_time_now(time_spec, m); + } + } + + void set_time_next_pps(const time_spec_t &time_spec){ + for (size_t m = 0; m < get_num_mboards(); m++){ + _mboard(m)[MBOARD_PROP_TIME_PPS] = time_spec; + } + } + + void set_time_unknown_pps(const time_spec_t &time_spec){ + std::cout << " 1) catch time transition at pps edge" << std::endl; + time_spec_t time_start = get_time_now(); + time_spec_t time_start_last_pps = get_time_last_pps(); + while(true){ + if (get_time_last_pps() != time_start_last_pps) break; + if ((get_time_now() - time_start) > time_spec_t(1.1)){ + throw uhd::runtime_error( + "Board 0 may not be getting a PPS signal!\n" + "No PPS detected within the time interval.\n" + "See the application notes for your device.\n" + ); + } + } + + std::cout << " 2) set times next pps (synchronously)" << std::endl; + set_time_next_pps(time_spec); + boost::this_thread::sleep(boost::posix_time::seconds(1)); + + //verify that the time registers are read to be within a few RTT + for (size_t m = 1; m < get_num_mboards(); m++){ + time_spec_t time_0 = _mboard(0)[MBOARD_PROP_TIME_NOW].as<time_spec_t>(); + time_spec_t time_i = _mboard(m)[MBOARD_PROP_TIME_NOW].as<time_spec_t>(); + if (time_i < time_0 or (time_i - time_0) > time_spec_t(0.01)){ //10 ms: greater than RTT but not too big + uhd::warning::post(str(boost::format( + "Detected time deviation between board %d and board 0.\n" + "Board 0 time is %f seconds.\n" + "Board %d time is %f seconds.\n" + ) % m % time_0.get_real_secs() % m % time_i.get_real_secs())); + } + } + } + + bool get_time_synchronized(void){ + for (size_t m = 1; m < get_num_mboards(); m++){ + time_spec_t time_0 = _mboard(0)[MBOARD_PROP_TIME_NOW].as<time_spec_t>(); + time_spec_t time_i = _mboard(m)[MBOARD_PROP_TIME_NOW].as<time_spec_t>(); + if (time_i < time_0 or (time_i - time_0) > time_spec_t(0.01)) return false; + } + return true; + } + + void issue_stream_cmd(const stream_cmd_t &stream_cmd, size_t chan){ + if (chan != ALL_CHANS){ + _rx_dsp(chan)[DSP_PROP_STREAM_CMD] = stream_cmd; + return; + } + for (size_t c = 0; c < get_rx_num_channels(); c++){ + issue_stream_cmd(stream_cmd, c); + } + } + + void set_clock_config(const clock_config_t &clock_config, size_t mboard){ + if (mboard != ALL_MBOARDS){ + _mboard(mboard)[MBOARD_PROP_CLOCK_CONFIG] = clock_config; + return; + } + for (size_t m = 0; m < get_num_mboards(); m++){ + set_clock_config(clock_config, m); + } + } + + size_t get_num_mboards(void){ + return (*_dev)[DEVICE_PROP_MBOARD_NAMES].as<prop_names_t>().size(); + } + + sensor_value_t get_mboard_sensor(const std::string &name, size_t mboard){ + return _mboard(mboard)[named_prop_t(MBOARD_PROP_SENSOR, name)].as<sensor_value_t>(); + } + + std::vector<std::string> get_mboard_sensor_names(size_t mboard){ + return _mboard(mboard)[MBOARD_PROP_SENSOR_NAMES].as<prop_names_t>(); + } + + mboard_iface::sptr get_mboard_iface(size_t mboard){ + return _mboard(mboard)[MBOARD_PROP_IFACE].as<mboard_iface::sptr>(); + } + + /******************************************************************* + * RX methods + ******************************************************************/ + void set_rx_subdev_spec(const subdev_spec_t &spec, size_t mboard){ + if (mboard != ALL_MBOARDS){ + _mboard(mboard)[MBOARD_PROP_RX_SUBDEV_SPEC] = spec; + return; + } + for (size_t m = 0; m < get_num_mboards(); m++){ + set_rx_subdev_spec(spec, m); + } + } + + subdev_spec_t get_rx_subdev_spec(size_t mboard){ + return _mboard(mboard)[MBOARD_PROP_RX_SUBDEV_SPEC].as<subdev_spec_t>(); + } + + size_t get_rx_num_channels(void){ + size_t sum = 0; + for (size_t m = 0; m < get_num_mboards(); m++){ + sum += get_rx_subdev_spec(m).size(); + } + return sum; + } + + std::string get_rx_subdev_name(size_t chan){ + return _rx_subdev(chan)[SUBDEV_PROP_NAME].as<std::string>(); + } + + void set_rx_rate(double rate, size_t chan){ + if (chan != ALL_CHANS){ + _rx_dsp(chan)[DSP_PROP_HOST_RATE] = rate; + do_samp_rate_warning_message(rate, get_rx_rate(chan), "RX"); + return; + } + for (size_t c = 0; c < get_rx_num_channels(); c++){ + set_rx_rate(rate, c); + } + } + + double get_rx_rate(size_t chan){ + return _rx_dsp(chan)[DSP_PROP_HOST_RATE].as<double>(); + } + + tune_result_t set_rx_freq(const tune_request_t &tune_request, size_t chan){ + tune_result_t r = tune_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(chan), tune_request); + do_tune_freq_warning_message(tune_request.target_freq, get_rx_freq(chan), "RX"); + return r; + } + + double get_rx_freq(size_t chan){ + return derive_freq_from_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(chan)); + } + + freq_range_t get_rx_freq_range(size_t chan){ + return add_dsp_shift(_rx_subdev(chan)[SUBDEV_PROP_FREQ_RANGE].as<freq_range_t>(), _rx_dsp(chan)); + } + + void set_rx_gain(double gain, const std::string &name, size_t chan){ + return _rx_gain_group(chan)->set_value(gain, name); + } + + double get_rx_gain(const std::string &name, size_t chan){ + return _rx_gain_group(chan)->get_value(name); + } + + gain_range_t get_rx_gain_range(const std::string &name, size_t chan){ + return _rx_gain_group(chan)->get_range(name); + } + + std::vector<std::string> get_rx_gain_names(size_t chan){ + return _rx_gain_group(chan)->get_names(); + } + + void set_rx_antenna(const std::string &ant, size_t chan){ + _rx_subdev(chan)[SUBDEV_PROP_ANTENNA] = ant; + } + + std::string get_rx_antenna(size_t chan){ + return _rx_subdev(chan)[SUBDEV_PROP_ANTENNA].as<std::string>(); + } + + std::vector<std::string> get_rx_antennas(size_t chan){ + return _rx_subdev(chan)[SUBDEV_PROP_ANTENNA_NAMES].as<prop_names_t>(); + } + + void set_rx_bandwidth(double bandwidth, size_t chan){ + _rx_subdev(chan)[SUBDEV_PROP_BANDWIDTH] = bandwidth; + } + + double get_rx_bandwidth(size_t chan){ + return _rx_subdev(chan)[SUBDEV_PROP_BANDWIDTH].as<double>(); + } + + dboard_iface::sptr get_rx_dboard_iface(size_t chan){ + return _rx_dboard(chan)[DBOARD_PROP_DBOARD_IFACE].as<dboard_iface::sptr>(); + } + + sensor_value_t get_rx_sensor(const std::string &name, size_t chan){ + return _rx_subdev(chan)[named_prop_t(SUBDEV_PROP_SENSOR, name)].as<sensor_value_t>(); + } + + std::vector<std::string> get_rx_sensor_names(size_t chan){ + return _rx_subdev(chan)[SUBDEV_PROP_SENSOR_NAMES].as<prop_names_t>(); + } + + /******************************************************************* + * TX methods + ******************************************************************/ + void set_tx_subdev_spec(const subdev_spec_t &spec, size_t mboard){ + if (mboard != ALL_MBOARDS){ + _mboard(mboard)[MBOARD_PROP_TX_SUBDEV_SPEC] = spec; + return; + } + for (size_t m = 0; m < get_num_mboards(); m++){ + set_tx_subdev_spec(spec, m); + } + } + + subdev_spec_t get_tx_subdev_spec(size_t mboard){ + return _mboard(mboard)[MBOARD_PROP_TX_SUBDEV_SPEC].as<subdev_spec_t>(); + } + + std::string get_tx_subdev_name(size_t chan){ + return _tx_subdev(chan)[SUBDEV_PROP_NAME].as<std::string>(); + } + + size_t get_tx_num_channels(void){ + size_t sum = 0; + for (size_t m = 0; m < get_num_mboards(); m++){ + sum += get_tx_subdev_spec(m).size(); + } + return sum; + } + + void set_tx_rate(double rate, size_t chan){ + if (chan != ALL_CHANS){ + _tx_dsp(chan)[DSP_PROP_HOST_RATE] = rate; + do_samp_rate_warning_message(rate, get_tx_rate(chan), "TX"); + return; + } + for (size_t c = 0; c < get_tx_num_channels(); c++){ + set_tx_rate(rate, c); + } + } + + double get_tx_rate(size_t chan){ + return _tx_dsp(chan)[DSP_PROP_HOST_RATE].as<double>(); + } + + tune_result_t set_tx_freq(const tune_request_t &tune_request, size_t chan){ + tune_result_t r = tune_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(chan), tune_request); + do_tune_freq_warning_message(tune_request.target_freq, get_tx_freq(chan), "TX"); + return r; + } + + double get_tx_freq(size_t chan){ + return derive_freq_from_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(chan)); + } + + freq_range_t get_tx_freq_range(size_t chan){ + return add_dsp_shift(_tx_subdev(chan)[SUBDEV_PROP_FREQ_RANGE].as<freq_range_t>(), _tx_dsp(chan)); + } + + void set_tx_gain(double gain, const std::string &name, size_t chan){ + return _tx_gain_group(chan)->set_value(gain, name); + } + + double get_tx_gain(const std::string &name, size_t chan){ + return _tx_gain_group(chan)->get_value(name); + } + + gain_range_t get_tx_gain_range(const std::string &name, size_t chan){ + return _tx_gain_group(chan)->get_range(name); + } + + std::vector<std::string> get_tx_gain_names(size_t chan){ + return _tx_gain_group(chan)->get_names(); + } + + void set_tx_antenna(const std::string &ant, size_t chan){ + _tx_subdev(chan)[SUBDEV_PROP_ANTENNA] = ant; + } + + std::string get_tx_antenna(size_t chan){ + return _tx_subdev(chan)[SUBDEV_PROP_ANTENNA].as<std::string>(); + } + + std::vector<std::string> get_tx_antennas(size_t chan){ + return _tx_subdev(chan)[SUBDEV_PROP_ANTENNA_NAMES].as<prop_names_t>(); + } + + void set_tx_bandwidth(double bandwidth, size_t chan){ + _tx_subdev(chan)[SUBDEV_PROP_BANDWIDTH] = bandwidth; + } + + double get_tx_bandwidth(size_t chan){ + return _tx_subdev(chan)[SUBDEV_PROP_BANDWIDTH].as<double>(); + } + + dboard_iface::sptr get_tx_dboard_iface(size_t chan){ + return _tx_dboard(chan)[DBOARD_PROP_DBOARD_IFACE].as<dboard_iface::sptr>(); + } + + sensor_value_t get_tx_sensor(const std::string &name, size_t chan){ + return _tx_subdev(chan)[named_prop_t(SUBDEV_PROP_SENSOR, name)].as<sensor_value_t>(); + } + + std::vector<std::string> get_tx_sensor_names(size_t chan){ + return _tx_subdev(chan)[SUBDEV_PROP_SENSOR_NAMES].as<prop_names_t>(); + } + +private: + device::sptr _dev; + + struct mboard_chan_pair{ + size_t mboard, chan; + mboard_chan_pair(void): mboard(0), chan(0){} + }; + + mboard_chan_pair rx_chan_to_mcp(size_t chan){ + mboard_chan_pair mcp; + mcp.chan = chan; + for (mcp.mboard = 0; mcp.mboard < get_num_mboards(); mcp.mboard++){ + size_t sss = get_rx_subdev_spec(mcp.mboard).size(); + if (mcp.chan < sss) break; + mcp.chan -= sss; + } + return mcp; + } + + mboard_chan_pair tx_chan_to_mcp(size_t chan){ + mboard_chan_pair mcp; + mcp.chan = chan; + for (mcp.mboard = 0; mcp.mboard < get_num_mboards(); mcp.mboard++){ + size_t sss = get_tx_subdev_spec(mcp.mboard).size(); + if (mcp.chan < sss) break; + mcp.chan -= sss; + } + return mcp; + } + + wax::obj _mboard(size_t mboard){ + std::string mb_name = (*_dev)[DEVICE_PROP_MBOARD_NAMES].as<prop_names_t>().at(mboard); + return (*_dev)[named_prop_t(DEVICE_PROP_MBOARD, mb_name)]; + } + wax::obj _rx_dsp(size_t chan){ + mboard_chan_pair mcp = rx_chan_to_mcp(chan); + prop_names_t dsp_names = _mboard(mcp.mboard)[MBOARD_PROP_RX_DSP_NAMES].as<prop_names_t>(); + return _mboard(mcp.mboard)[named_prop_t(MBOARD_PROP_RX_DSP, dsp_names.at(mcp.chan))]; + } + wax::obj _tx_dsp(size_t chan){ + mboard_chan_pair mcp = tx_chan_to_mcp(chan); + prop_names_t dsp_names = _mboard(mcp.mboard)[MBOARD_PROP_TX_DSP_NAMES].as<prop_names_t>(); + return _mboard(mcp.mboard)[named_prop_t(MBOARD_PROP_TX_DSP, dsp_names.at(mcp.chan))]; + } + wax::obj _rx_dboard(size_t chan){ + mboard_chan_pair mcp = rx_chan_to_mcp(chan); + std::string db_name = get_rx_subdev_spec(mcp.mboard).at(mcp.chan).db_name; + return _mboard(mcp.mboard)[named_prop_t(MBOARD_PROP_RX_DBOARD, db_name)]; + } + wax::obj _tx_dboard(size_t chan){ + mboard_chan_pair mcp = tx_chan_to_mcp(chan); + std::string db_name = get_tx_subdev_spec(mcp.mboard).at(mcp.chan).db_name; + return _mboard(mcp.mboard)[named_prop_t(MBOARD_PROP_TX_DBOARD, db_name)]; + } + wax::obj _rx_subdev(size_t chan){ + mboard_chan_pair mcp = rx_chan_to_mcp(chan); + std::string sd_name = get_rx_subdev_spec(mcp.mboard).at(mcp.chan).sd_name; + return _rx_dboard(chan)[named_prop_t(DBOARD_PROP_SUBDEV, sd_name)]; + } + wax::obj _tx_subdev(size_t chan){ + mboard_chan_pair mcp = tx_chan_to_mcp(chan); + std::string sd_name = get_tx_subdev_spec(mcp.mboard).at(mcp.chan).sd_name; + return _tx_dboard(chan)[named_prop_t(DBOARD_PROP_SUBDEV, sd_name)]; + } + gain_group::sptr _rx_gain_group(size_t chan){ + mboard_chan_pair mcp = rx_chan_to_mcp(chan); + std::string sd_name = get_rx_subdev_spec(mcp.mboard).at(mcp.chan).sd_name; + return _rx_dboard(chan)[named_prop_t(DBOARD_PROP_GAIN_GROUP, sd_name)].as<gain_group::sptr>(); + } + gain_group::sptr _tx_gain_group(size_t chan){ + mboard_chan_pair mcp = tx_chan_to_mcp(chan); + std::string sd_name = get_tx_subdev_spec(mcp.mboard).at(mcp.chan).sd_name; + return _tx_dboard(chan)[named_prop_t(DBOARD_PROP_GAIN_GROUP, sd_name)].as<gain_group::sptr>(); + } +}; + +/*********************************************************************** + * The Make Function + **********************************************************************/ +multi_usrp::sptr multi_usrp::make(const device_addr_t &dev_addr){ + return sptr(new multi_usrp_impl(dev_addr)); +} diff --git a/host/lib/usrp/subdev_spec.cpp b/host/lib/usrp/subdev_spec.cpp new file mode 100644 index 000000000..6912afec8 --- /dev/null +++ b/host/lib/usrp/subdev_spec.cpp @@ -0,0 +1,80 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/usrp/subdev_spec.hpp> +#include <uhd/exception.hpp> +#include <boost/algorithm/string.hpp> //for split +#include <boost/tokenizer.hpp> +#include <boost/format.hpp> +#include <boost/foreach.hpp> +#include <sstream> +#include <vector> + +using namespace uhd; +using namespace uhd::usrp; + +#define pair_tokenizer(inp) \ + boost::tokenizer<boost::char_separator<char> > \ + (inp, boost::char_separator<char>(" ")) + +subdev_spec_pair_t::subdev_spec_pair_t( + const std::string &db_name, const std::string &sd_name +): + db_name(db_name), + sd_name(sd_name) +{ + /* NOP */ +} + +bool usrp::operator==(const subdev_spec_pair_t &lhs, const subdev_spec_pair_t &rhs){ + return (lhs.db_name == rhs.db_name) and (lhs.sd_name == rhs.sd_name); +} + +subdev_spec_t::subdev_spec_t(const std::string &markup){ + BOOST_FOREACH(const std::string &pair, pair_tokenizer(markup)){ + if (pair.empty()) continue; + std::vector<std::string> db_sd; boost::split(db_sd, pair, boost::is_any_of(":")); + switch(db_sd.size()){ + case 1: this->push_back(subdev_spec_pair_t("", db_sd.front())); break; + case 2: this->push_back(subdev_spec_pair_t(db_sd.front(), db_sd.back())); break; + default: throw uhd::value_error("invalid subdev-spec markup string: "+markup); + } + } +} + +std::string subdev_spec_t::to_pp_string(void) const{ + if (this->size() == 0) return "Empty Subdevice Specification"; + + std::stringstream ss; + size_t count = 0; + ss << "Subdevice Specification:" << std::endl; + BOOST_FOREACH(const subdev_spec_pair_t &pair, *this){ + ss << boost::format( + " Channel %d: Daughterboard %s, Subdevice %s" + ) % (count++) % pair.db_name % pair.sd_name << std::endl; + } + return ss.str(); +} + +std::string subdev_spec_t::to_string(void) const{ + std::string markup; + size_t count = 0; + BOOST_FOREACH(const subdev_spec_pair_t &pair, *this){ + markup += ((count++)? " " : "") + pair.db_name + ":" + pair.sd_name; + } + return markup; +} diff --git a/host/lib/usrp/tune_helper.cpp b/host/lib/usrp/tune_helper.cpp new file mode 100644 index 000000000..ced80c187 --- /dev/null +++ b/host/lib/usrp/tune_helper.cpp @@ -0,0 +1,147 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/usrp/tune_helper.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/usrp/dsp_props.hpp> +#include <uhd/usrp/dboard_iface.hpp> //unit_t +#include <uhd/utils/algorithm.hpp> +#include <cmath> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * Tune Helper Functions + **********************************************************************/ +static tune_result_t tune_xx_subdev_and_dsp( + dboard_iface::unit_t unit, + wax::obj subdev, wax::obj dsp, + const tune_request_t &tune_request +){ + wax::obj subdev_freq_proxy = subdev[SUBDEV_PROP_FREQ]; + wax::obj dsp_freq_proxy = dsp[DSP_PROP_FREQ_SHIFT]; + + //------------------------------------------------------------------ + //-- calculate the LO offset, only used with automatic policy + //------------------------------------------------------------------ + double lo_offset = 0.0; + if (subdev[SUBDEV_PROP_USE_LO_OFFSET].as<bool>()){ + //If the local oscillator will be in the passband, use an offset. + //But constrain the LO offset by the width of the filter bandwidth. + double rate = dsp[DSP_PROP_HOST_RATE].as<double>(); + double bw = subdev[SUBDEV_PROP_BANDWIDTH].as<double>(); + if (bw > rate) lo_offset = std::min((bw - rate)/2, rate/2); + } + + //------------------------------------------------------------------ + //-- set the intermediate frequency depending upon the IF policy + //------------------------------------------------------------------ + double target_inter_freq = 0.0; + switch (tune_request.inter_freq_policy){ + case tune_request_t::POLICY_AUTO: + target_inter_freq = tune_request.target_freq + lo_offset; + subdev_freq_proxy = target_inter_freq; + break; + + case tune_request_t::POLICY_MANUAL: + target_inter_freq = tune_request.inter_freq; + subdev_freq_proxy = target_inter_freq; + break; + + case tune_request_t::POLICY_NONE: break; //does not set + } + double actual_inter_freq = subdev_freq_proxy.as<double>(); + + //------------------------------------------------------------------ + //-- calculate the dsp freq, only used with automatic policy + //------------------------------------------------------------------ + double target_dsp_freq = actual_inter_freq - tune_request.target_freq; + + //invert the sign on the dsp freq given the following conditions + if (unit == dboard_iface::UNIT_TX) target_dsp_freq *= -1.0; + + //------------------------------------------------------------------ + //-- set the dsp frequency depending upon the dsp frequency policy + //------------------------------------------------------------------ + switch (tune_request.dsp_freq_policy){ + case tune_request_t::POLICY_AUTO: + dsp_freq_proxy = target_dsp_freq; + break; + + case tune_request_t::POLICY_MANUAL: + target_dsp_freq = tune_request.dsp_freq; + dsp_freq_proxy = target_dsp_freq; + break; + + case tune_request_t::POLICY_NONE: break; //does not set + } + double actual_dsp_freq = dsp_freq_proxy.as<double>(); + + //------------------------------------------------------------------ + //-- load and return the tune result + //------------------------------------------------------------------ + tune_result_t tune_result; + tune_result.target_inter_freq = target_inter_freq; + tune_result.actual_inter_freq = actual_inter_freq; + tune_result.target_dsp_freq = target_dsp_freq; + tune_result.actual_dsp_freq = actual_dsp_freq; + return tune_result; +} + +static double derive_freq_from_xx_subdev_and_dsp( + dboard_iface::unit_t unit, wax::obj subdev, wax::obj dsp +){ + //extract actual dsp and IF frequencies + double actual_inter_freq = subdev[SUBDEV_PROP_FREQ].as<double>(); + double actual_dsp_freq = dsp[DSP_PROP_FREQ_SHIFT].as<double>(); + + //invert the sign on the dsp freq given the following conditions + if (unit == dboard_iface::UNIT_TX) actual_dsp_freq *= -1.0; + + return actual_inter_freq - actual_dsp_freq; +} + +/*********************************************************************** + * RX Tune + **********************************************************************/ +tune_result_t usrp::tune_rx_subdev_and_dsp( + wax::obj subdev, wax::obj ddc, const tune_request_t &tune_request +){ + return tune_xx_subdev_and_dsp(dboard_iface::UNIT_RX, subdev, ddc, tune_request); +} + +double usrp::derive_freq_from_rx_subdev_and_dsp( + wax::obj subdev, wax::obj ddc +){ + return derive_freq_from_xx_subdev_and_dsp(dboard_iface::UNIT_RX, subdev, ddc); +} + +/*********************************************************************** + * TX Tune + **********************************************************************/ +tune_result_t usrp::tune_tx_subdev_and_dsp( + wax::obj subdev, wax::obj duc, const tune_request_t &tune_request +){ + return tune_xx_subdev_and_dsp(dboard_iface::UNIT_TX, subdev, duc, tune_request); +} + +double usrp::derive_freq_from_tx_subdev_and_dsp( + wax::obj subdev, wax::obj duc +){ + return derive_freq_from_xx_subdev_and_dsp(dboard_iface::UNIT_TX, subdev, duc); +} diff --git a/host/lib/usrp/usrp1/CMakeLists.txt b/host/lib/usrp/usrp1/CMakeLists.txt new file mode 100644 index 000000000..9e50f5728 --- /dev/null +++ b/host/lib/usrp/usrp1/CMakeLists.txt @@ -0,0 +1,49 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# This file included, use CMake directory variables +######################################################################## + +######################################################################## +# Conditionally configure the USRP1 support +######################################################################## +LIBUHD_REGISTER_COMPONENT("USRP1" ENABLE_USRP1 ON "ENABLE_LIBUHD;ENABLE_USB" OFF) + +IF(ENABLE_USRP1) + INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/../firmware/fx2/common) + + LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/clock_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/clock_ctrl.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/codec_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/codec_ctrl.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/codec_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dboard_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dboard_iface.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dsp_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/io_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/mboard_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/soft_time_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp1_iface.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp1_iface.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp1_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp1_impl.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp1_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp1_ctrl.hpp + ) +ENDIF(ENABLE_USRP1) diff --git a/host/lib/usrp/usrp1/clock_ctrl.cpp b/host/lib/usrp/usrp1/clock_ctrl.cpp new file mode 100644 index 000000000..df5353b54 --- /dev/null +++ b/host/lib/usrp/usrp1/clock_ctrl.cpp @@ -0,0 +1,54 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "clock_ctrl.hpp" + +using namespace uhd; + +/*********************************************************************** + * Constants + **********************************************************************/ +static const double default_master_clock_rate = 64e6; + +/*********************************************************************** + * Clock Control Implementation + **********************************************************************/ +class usrp1_clock_ctrl_impl : public usrp1_clock_ctrl { +public: + usrp1_clock_ctrl_impl(usrp1_iface::sptr iface): _iface(iface){ + this->set_master_clock_freq(default_master_clock_rate); + } + + void set_master_clock_freq(double freq){ + _freq = freq; + } + + double get_master_clock_freq(void){ + return _freq; + } + +private: + usrp1_iface::sptr _iface; + double _freq; +}; + +/*********************************************************************** + * Clock Control Make + **********************************************************************/ +usrp1_clock_ctrl::sptr usrp1_clock_ctrl::make(usrp1_iface::sptr iface){ + return sptr(new usrp1_clock_ctrl_impl(iface)); +} diff --git a/host/lib/usrp/usrp1/clock_ctrl.hpp b/host/lib/usrp/usrp1/clock_ctrl.hpp new file mode 100644 index 000000000..645472f02 --- /dev/null +++ b/host/lib/usrp/usrp1/clock_ctrl.hpp @@ -0,0 +1,57 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP1_CLOCK_CTRL_HPP +#define INCLUDED_USRP1_CLOCK_CTRL_HPP + +#include "usrp1_iface.hpp" +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include <vector> + +/*! + * The usrp1 clock control: + * - Setup system clocks. + * - Disable/enable clock lines. + */ +class usrp1_clock_ctrl : boost::noncopyable{ +public: + typedef boost::shared_ptr<usrp1_clock_ctrl> sptr; + + /*! + * Make a new clock control object. + * \param iface the usrp1 iface object + * \return the clock control object + */ + static sptr make(usrp1_iface::sptr iface); + + /*! + * Set the rate of the fpga clock line. + * Note: does not really set, its all software. + * \param freq the new clock rate in Hz + */ + virtual void set_master_clock_freq(double freq) = 0; + + /*! + * Get the rate of the fpga clock line. + * \return the fpga clock rate in Hz + */ + virtual double get_master_clock_freq(void) = 0; + +}; + +#endif /* INCLUDED_USRP1_CLOCK_CTRL_HPP */ diff --git a/host/lib/usrp/usrp1/codec_ctrl.cpp b/host/lib/usrp/usrp1/codec_ctrl.cpp new file mode 100644 index 000000000..1b4411002 --- /dev/null +++ b/host/lib/usrp/usrp1/codec_ctrl.cpp @@ -0,0 +1,449 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "codec_ctrl.hpp" +#include "usrp_commands.h" +#include "clock_ctrl.hpp" +#include "ad9862_regs.hpp" +#include <uhd/types/dict.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/algorithm.hpp> +#include <uhd/utils/byteswap.hpp> +#include <boost/cstdint.hpp> +#include <boost/format.hpp> +#include <boost/tuple/tuple.hpp> +#include <boost/math/special_functions/round.hpp> +#include <boost/assign/list_of.hpp> +#include <iostream> +#include <iomanip> + +using namespace uhd; + +static const bool codec_debug = false; + +const gain_range_t usrp1_codec_ctrl::tx_pga_gain_range(-20, 0, double(0.1)); +const gain_range_t usrp1_codec_ctrl::rx_pga_gain_range(0, 20, 1); + +/*********************************************************************** + * Codec Control Implementation + **********************************************************************/ +class usrp1_codec_ctrl_impl : public usrp1_codec_ctrl { +public: + //structors + usrp1_codec_ctrl_impl(usrp1_iface::sptr iface, + usrp1_clock_ctrl::sptr clock, + int spi_slave); + ~usrp1_codec_ctrl_impl(void); + + //aux adc and dac control + double read_aux_adc(aux_adc_t which); + void write_aux_dac(aux_dac_t which, double volts); + + //duc control + void set_duc_freq(double freq); + void enable_tx_digital(bool enb); + + //pga gain control + void set_tx_pga_gain(double); + double get_tx_pga_gain(void); + void set_rx_pga_gain(double, char); + double get_rx_pga_gain(char); + + //rx adc buffer control + void bypass_adc_buffers(bool bypass); + +private: + usrp1_iface::sptr _iface; + usrp1_clock_ctrl::sptr _clock_ctrl; + int _spi_slave; + ad9862_regs_t _ad9862_regs; + aux_adc_t _last_aux_adc_a, _last_aux_adc_b; + void send_reg(boost::uint8_t addr); + void recv_reg(boost::uint8_t addr); + + double coarse_tune(double codec_rate, double freq); + double fine_tune(double codec_rate, double freq); +}; + +/*********************************************************************** + * Codec Control Structors + **********************************************************************/ +usrp1_codec_ctrl_impl::usrp1_codec_ctrl_impl(usrp1_iface::sptr iface, + usrp1_clock_ctrl::sptr clock, + int spi_slave) +{ + _iface = iface; + _clock_ctrl = clock; + _spi_slave = spi_slave; + + //soft reset + _ad9862_regs.soft_reset = 1; + this->send_reg(0); + + //initialize the codec register settings + _ad9862_regs.sdio_bidir = ad9862_regs_t::SDIO_BIDIR_SDIO_SDO; + _ad9862_regs.lsb_first = ad9862_regs_t::LSB_FIRST_MSB; + _ad9862_regs.soft_reset = 0; + + //setup rx side of codec + _ad9862_regs.byp_buffer_a = 1; + _ad9862_regs.byp_buffer_b = 1; + _ad9862_regs.buffer_a_pd = 1; + _ad9862_regs.buffer_b_pd = 1; + _ad9862_regs.rx_pga_a = 0; + _ad9862_regs.rx_pga_b = 0; + _ad9862_regs.rx_twos_comp = 1; + _ad9862_regs.rx_hilbert = ad9862_regs_t::RX_HILBERT_DIS; + + //setup tx side of codec + _ad9862_regs.two_data_paths = ad9862_regs_t::TWO_DATA_PATHS_BOTH; + _ad9862_regs.interleaved = ad9862_regs_t::INTERLEAVED_INTERLEAVED; + _ad9862_regs.tx_pga_gain = 199; + _ad9862_regs.tx_hilbert = ad9862_regs_t::TX_HILBERT_DIS; + _ad9862_regs.interp = ad9862_regs_t::INTERP_4; + _ad9862_regs.tx_twos_comp = 1; + _ad9862_regs.fine_mode = ad9862_regs_t::FINE_MODE_NCO; + _ad9862_regs.coarse_mod = ad9862_regs_t::COARSE_MOD_BYPASS; + _ad9862_regs.dac_a_coarse_gain = 0x3; + _ad9862_regs.dac_b_coarse_gain = 0x3; + + //setup the dll + _ad9862_regs.input_clk_ctrl = ad9862_regs_t::INPUT_CLK_CTRL_EXTERNAL; + _ad9862_regs.dll_mult = ad9862_regs_t::DLL_MULT_2; + _ad9862_regs.dll_mode = ad9862_regs_t::DLL_MODE_FAST; + + //setup clockout + _ad9862_regs.clkout2_div_factor = ad9862_regs_t::CLKOUT2_DIV_FACTOR_2; + + //write the register settings to the codec + for (boost::uint8_t addr = 0; addr <= 25; addr++) { + this->send_reg(addr); + } + + //aux adc clock + _ad9862_regs.clk_4 = ad9862_regs_t::CLK_4_1_4; + this->send_reg(34); +} + +usrp1_codec_ctrl_impl::~usrp1_codec_ctrl_impl(void) +{ + //set aux dacs to zero + this->write_aux_dac(AUX_DAC_A, 0); + this->write_aux_dac(AUX_DAC_B, 0); + this->write_aux_dac(AUX_DAC_C, 0); + this->write_aux_dac(AUX_DAC_D, 0); + + //power down + _ad9862_regs.all_rx_pd = 1; + this->send_reg(1); + _ad9862_regs.tx_digital_pd = 1; + _ad9862_regs.tx_analog_pd = ad9862_regs_t::TX_ANALOG_PD_BOTH; + this->send_reg(8); +} + +/*********************************************************************** + * Codec Control Gain Control Methods + **********************************************************************/ +static const int mtpgw = 255; //maximum tx pga gain word + +void usrp1_codec_ctrl_impl::set_tx_pga_gain(double gain){ + int gain_word = int(mtpgw*(gain - tx_pga_gain_range.start())/(tx_pga_gain_range.stop() - tx_pga_gain_range.start())); + _ad9862_regs.tx_pga_gain = uhd::clip(gain_word, 0, mtpgw); + this->send_reg(16); +} + +double usrp1_codec_ctrl_impl::get_tx_pga_gain(void){ + return (_ad9862_regs.tx_pga_gain*(tx_pga_gain_range.stop() - tx_pga_gain_range.start())/mtpgw) + tx_pga_gain_range.start(); +} + +static const int mrpgw = 0x14; //maximum rx pga gain word + +void usrp1_codec_ctrl_impl::set_rx_pga_gain(double gain, char which){ + int gain_word = int(mrpgw*(gain - rx_pga_gain_range.start())/(rx_pga_gain_range.stop() - rx_pga_gain_range.start())); + gain_word = uhd::clip(gain_word, 0, mrpgw); + switch(which){ + case 'A': + _ad9862_regs.rx_pga_a = gain_word; + this->send_reg(2); + return; + case 'B': + _ad9862_regs.rx_pga_b = gain_word; + this->send_reg(3); + return; + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +double usrp1_codec_ctrl_impl::get_rx_pga_gain(char which){ + int gain_word; + switch(which){ + case 'A': gain_word = _ad9862_regs.rx_pga_a; break; + case 'B': gain_word = _ad9862_regs.rx_pga_b; break; + default: UHD_THROW_INVALID_CODE_PATH(); + } + return (gain_word*(rx_pga_gain_range.stop() - rx_pga_gain_range.start())/mrpgw) + rx_pga_gain_range.start(); +} + +/*********************************************************************** + * Codec Control AUX ADC Methods + **********************************************************************/ +static double aux_adc_to_volts(boost::uint8_t high, boost::uint8_t low) +{ + return double(((boost::uint16_t(high) << 2) | low)*3.3)/0x3ff; +} + +double usrp1_codec_ctrl_impl::read_aux_adc(aux_adc_t which) +{ + //check to see if the switch needs to be set + bool write_switch = false; + switch(which) { + + case AUX_ADC_A1: + case AUX_ADC_A2: + if (which != _last_aux_adc_a) { + _ad9862_regs.select_a = (which == AUX_ADC_A1)? + ad9862_regs_t::SELECT_A_AUX_ADC1: ad9862_regs_t::SELECT_A_AUX_ADC2; + _last_aux_adc_a = which; + write_switch = true; + } + break; + + case AUX_ADC_B1: + case AUX_ADC_B2: + if (which != _last_aux_adc_b) { + _ad9862_regs.select_b = (which == AUX_ADC_B1)? + ad9862_regs_t::SELECT_B_AUX_ADC1: ad9862_regs_t::SELECT_B_AUX_ADC2; + _last_aux_adc_b = which; + write_switch = true; + } + break; + + } + + //write the switch if it changed + if(write_switch) this->send_reg(34); + + //map aux adcs to register values to read + static const uhd::dict<aux_adc_t, boost::uint8_t> aux_dac_to_addr = boost::assign::map_list_of + (AUX_ADC_A2, 26) (AUX_ADC_A1, 28) + (AUX_ADC_B2, 30) (AUX_ADC_B1, 32) + ; + + //read the value + this->recv_reg(aux_dac_to_addr[which]+0); + this->recv_reg(aux_dac_to_addr[which]+1); + + //return the value scaled to volts + switch(which) { + case AUX_ADC_A1: return aux_adc_to_volts(_ad9862_regs.aux_adc_a1_9_2, _ad9862_regs.aux_adc_a1_1_0); + case AUX_ADC_A2: return aux_adc_to_volts(_ad9862_regs.aux_adc_a2_9_2, _ad9862_regs.aux_adc_a2_1_0); + case AUX_ADC_B1: return aux_adc_to_volts(_ad9862_regs.aux_adc_b1_9_2, _ad9862_regs.aux_adc_b1_1_0); + case AUX_ADC_B2: return aux_adc_to_volts(_ad9862_regs.aux_adc_b2_9_2, _ad9862_regs.aux_adc_b2_1_0); + } + UHD_ASSERT_THROW(false); +} + +/*********************************************************************** + * Codec Control AUX DAC Methods + **********************************************************************/ +void usrp1_codec_ctrl_impl::write_aux_dac(aux_dac_t which, double volts) +{ + //special case for aux dac d (aka sigma delta word) + if (which == AUX_DAC_D) { + boost::uint16_t dac_word = uhd::clip(boost::math::iround(volts*0xfff/3.3), 0, 0xfff); + _ad9862_regs.sig_delt_11_4 = boost::uint8_t(dac_word >> 4); + _ad9862_regs.sig_delt_3_0 = boost::uint8_t(dac_word & 0xf); + this->send_reg(42); + this->send_reg(43); + return; + } + + //calculate the dac word for aux dac a, b, c + boost::uint8_t dac_word = uhd::clip(boost::math::iround(volts*0xff/3.3), 0, 0xff); + + //setup a lookup table for the aux dac params (reg ref, reg addr) + typedef boost::tuple<boost::uint8_t*, boost::uint8_t> dac_params_t; + uhd::dict<aux_dac_t, dac_params_t> aux_dac_to_params = boost::assign::map_list_of + (AUX_DAC_A, dac_params_t(&_ad9862_regs.aux_dac_a, 36)) + (AUX_DAC_B, dac_params_t(&_ad9862_regs.aux_dac_b, 37)) + (AUX_DAC_C, dac_params_t(&_ad9862_regs.aux_dac_c, 38)) + ; + + //set the aux dac register + UHD_ASSERT_THROW(aux_dac_to_params.has_key(which)); + boost::uint8_t *reg_ref, reg_addr; + boost::tie(reg_ref, reg_addr) = aux_dac_to_params[which]; + *reg_ref = dac_word; + this->send_reg(reg_addr); +} + +/*********************************************************************** + * Codec Control SPI Methods + **********************************************************************/ +void usrp1_codec_ctrl_impl::send_reg(boost::uint8_t addr) +{ + boost::uint32_t reg = _ad9862_regs.get_write_reg(addr); + + if (codec_debug) { + std::cout.fill('0'); + std::cout << "codec control write reg: 0x"; + std::cout << std::setw(8) << std::hex << reg << std::endl; + } + _iface->write_spi(_spi_slave, + spi_config_t::EDGE_RISE, reg, 16); +} + +void usrp1_codec_ctrl_impl::recv_reg(boost::uint8_t addr) +{ + boost::uint32_t reg = _ad9862_regs.get_read_reg(addr); + + if (codec_debug) { + std::cout.fill('0'); + std::cout << "codec control read reg: 0x"; + std::cout << std::setw(8) << std::hex << reg << std::endl; + } + + boost::uint32_t ret = _iface->read_spi(_spi_slave, + spi_config_t::EDGE_RISE, reg, 16); + + if (codec_debug) { + std::cout.fill('0'); + std::cout << "codec control read ret: 0x"; + std::cout << std::setw(8) << std::hex << ret << std::endl; + } + + _ad9862_regs.set_reg(addr, boost::uint16_t(ret)); +} + +/*********************************************************************** + * DUC tuning + **********************************************************************/ +double usrp1_codec_ctrl_impl::coarse_tune(double codec_rate, double freq) +{ + double coarse_freq; + + double coarse_freq_1 = codec_rate / 8; + double coarse_freq_2 = codec_rate / 4; + double coarse_limit_1 = coarse_freq_1 / 2; + double coarse_limit_2 = (coarse_freq_1 + coarse_freq_2) / 2; + double max_freq = coarse_freq_2 + .09375 * codec_rate; + + if (freq < -max_freq) { + return false; + } + else if (freq < -coarse_limit_2) { + _ad9862_regs.neg_coarse_tune = ad9862_regs_t::NEG_COARSE_TUNE_NEG_SHIFT; + _ad9862_regs.coarse_mod = ad9862_regs_t::COARSE_MOD_FDAC_4; + coarse_freq = -coarse_freq_2; + } + else if (freq < -coarse_limit_1) { + _ad9862_regs.neg_coarse_tune = ad9862_regs_t::NEG_COARSE_TUNE_NEG_SHIFT; + _ad9862_regs.coarse_mod = ad9862_regs_t::COARSE_MOD_FDAC_8; + coarse_freq = -coarse_freq_1; + } + else if (freq < coarse_limit_1) { + _ad9862_regs.coarse_mod = ad9862_regs_t::COARSE_MOD_BYPASS; + coarse_freq = 0; + } + else if (freq < coarse_limit_2) { + _ad9862_regs.neg_coarse_tune = ad9862_regs_t::NEG_COARSE_TUNE_POS_SHIFT; + _ad9862_regs.coarse_mod = ad9862_regs_t::COARSE_MOD_FDAC_8; + coarse_freq = coarse_freq_1; + } + else if (freq <= max_freq) { + _ad9862_regs.neg_coarse_tune = ad9862_regs_t::NEG_COARSE_TUNE_POS_SHIFT; + _ad9862_regs.coarse_mod = ad9862_regs_t::COARSE_MOD_FDAC_4; + coarse_freq = coarse_freq_2; + } + else { + return 0; + } + + return coarse_freq; +} + +double usrp1_codec_ctrl_impl::fine_tune(double codec_rate, double target_freq) +{ + static const double scale_factor = std::pow(2.0, 24); + + boost::uint32_t freq_word = boost::uint32_t( + boost::math::round(abs((target_freq / codec_rate) * scale_factor))); + + double actual_freq = freq_word * codec_rate / scale_factor; + + if (target_freq < 0) { + _ad9862_regs.neg_fine_tune = ad9862_regs_t::NEG_FINE_TUNE_NEG_SHIFT; + actual_freq = -actual_freq; + } + else { + _ad9862_regs.neg_fine_tune = ad9862_regs_t::NEG_FINE_TUNE_POS_SHIFT; + } + + _ad9862_regs.fine_mode = ad9862_regs_t::FINE_MODE_NCO; + _ad9862_regs.ftw_23_16 = (freq_word >> 16) & 0xff; + _ad9862_regs.ftw_15_8 = (freq_word >> 8) & 0xff; + _ad9862_regs.ftw_7_0 = (freq_word >> 0) & 0xff; + + return actual_freq; +} + +void usrp1_codec_ctrl_impl::set_duc_freq(double freq) +{ + double codec_rate = _clock_ctrl->get_master_clock_freq() * 2; + double coarse_freq = coarse_tune(codec_rate, freq); + double fine_freq = fine_tune(codec_rate / 4, freq - coarse_freq); + + if (codec_debug) { + std::cout << "ad9862 tuning result:" << std::endl; + std::cout << " requested: " << freq << std::endl; + std::cout << " actual: " << coarse_freq + fine_freq << std::endl; + std::cout << " coarse freq: " << coarse_freq << std::endl; + std::cout << " fine freq: " << fine_freq << std::endl; + std::cout << " codec rate: " << codec_rate << std::endl; + } + + this->send_reg(20); + this->send_reg(21); + this->send_reg(22); + this->send_reg(23); +} + +void usrp1_codec_ctrl_impl::enable_tx_digital(bool enb){ + _ad9862_regs.tx_digital_pd = (enb)? 0 : 1; + this->send_reg(8); +} + +/*********************************************************************** + * Codec Control ADC buffer bypass + * Disable this for AC-coupled daughterboards (TVRX) + * By default it is initialized TRUE. + **********************************************************************/ +void usrp1_codec_ctrl_impl::bypass_adc_buffers(bool bypass) { + _ad9862_regs.byp_buffer_a = bypass; + _ad9862_regs.byp_buffer_b = bypass; + this->send_reg(2); +} + +/*********************************************************************** + * Codec Control Make + **********************************************************************/ +usrp1_codec_ctrl::sptr usrp1_codec_ctrl::make(usrp1_iface::sptr iface, + usrp1_clock_ctrl::sptr clock, + int spi_slave) +{ + return sptr(new usrp1_codec_ctrl_impl(iface, clock, spi_slave)); +} diff --git a/host/lib/usrp/usrp1/codec_ctrl.hpp b/host/lib/usrp/usrp1/codec_ctrl.hpp new file mode 100644 index 000000000..20e4015c5 --- /dev/null +++ b/host/lib/usrp/usrp1/codec_ctrl.hpp @@ -0,0 +1,103 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP1_CODEC_CTRL_HPP +#define INCLUDED_USRP1_CODEC_CTRL_HPP + +#include "usrp1_iface.hpp" +#include "clock_ctrl.hpp" +#include <uhd/types/ranges.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> + +/*! + * The usrp1 codec control: + * - Init/power down codec. + * - Read aux adc, write aux dac. + */ +class usrp1_codec_ctrl : boost::noncopyable{ +public: + typedef boost::shared_ptr<usrp1_codec_ctrl> sptr; + + static const uhd::gain_range_t tx_pga_gain_range; + static const uhd::gain_range_t rx_pga_gain_range; + + /*! + * Make a new clock control object. + * \param iface the usrp1 iface object + * \param spi_slave which spi device + * \return the clock control object + */ + static sptr make(usrp1_iface::sptr iface, + usrp1_clock_ctrl::sptr clock, int spi_slave + ); + + //! aux adc identifier constants + enum aux_adc_t{ + AUX_ADC_A2 = 0xA2, + AUX_ADC_A1 = 0xA1, + AUX_ADC_B2 = 0xB2, + AUX_ADC_B1 = 0xB1 + }; + + /*! + * Read an auxiliary adc: + * The internals remember which aux adc was read last. + * Therefore, the aux adc switch is only changed as needed. + * \param which which of the 4 adcs + * \return a value in volts + */ + virtual double read_aux_adc(aux_adc_t which) = 0; + + //! aux dac identifier constants + enum aux_dac_t{ + AUX_DAC_A = 0xA, + AUX_DAC_B = 0xB, + AUX_DAC_C = 0xC, + AUX_DAC_D = 0xD + }; + + /*! + * Write an auxiliary dac. + * \param which which of the 4 dacs + * \param volts the level in in volts + */ + virtual void write_aux_dac(aux_dac_t which, double volts) = 0; + + //! Set the TX PGA gain + virtual void set_tx_pga_gain(double gain) = 0; + + //! Get the TX PGA gain + virtual double get_tx_pga_gain(void) = 0; + + //! Set the RX PGA gain ('A' or 'B') + virtual void set_rx_pga_gain(double gain, char which) = 0; + + //! Get the RX PGA gain ('A' or 'B') + virtual double get_rx_pga_gain(char which) = 0; + + //! Set the TX modulator frequency + virtual void set_duc_freq(double freq) = 0; + + //! Enable or disable the digital part of the DAC + virtual void enable_tx_digital(bool enb) = 0; + + //! Enable or disable ADC buffer bypass + virtual void bypass_adc_buffers(bool bypass) = 0; +}; + +#endif /* INCLUDED_USRP1_CODEC_CTRL_HPP */ diff --git a/host/lib/usrp/usrp1/codec_impl.cpp b/host/lib/usrp/usrp1/codec_impl.cpp new file mode 100644 index 000000000..7e4032131 --- /dev/null +++ b/host/lib/usrp/usrp1/codec_impl.cpp @@ -0,0 +1,159 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp1_impl.hpp" +#include <uhd/exception.hpp> +#include <uhd/usrp/codec_props.hpp> +#include <boost/bind.hpp> +#include <boost/foreach.hpp> +#include <boost/format.hpp> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * Helper Methods + **********************************************************************/ +void usrp1_impl::codec_init(void) +{ + //make proxies + BOOST_FOREACH(dboard_slot_t dboard_slot, _dboard_slots){ + _rx_codec_proxies[dboard_slot] = wax_obj_proxy::make( + boost::bind(&usrp1_impl::rx_codec_get, this, _1, _2, dboard_slot), + boost::bind(&usrp1_impl::rx_codec_set, this, _1, _2, dboard_slot)); + + _tx_codec_proxies[dboard_slot] = wax_obj_proxy::make( + boost::bind(&usrp1_impl::tx_codec_get, this, _1, _2, dboard_slot), + boost::bind(&usrp1_impl::tx_codec_set, this, _1, _2, dboard_slot)); + } +} + +/*********************************************************************** + * RX Codec Properties + **********************************************************************/ +static const std::string adc_pga_gain_name = "PGA"; + +void usrp1_impl::rx_codec_get(const wax::obj &key_, wax::obj &val, dboard_slot_t dboard_slot) +{ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<codec_prop_t>()) { + case CODEC_PROP_NAME: + val = str(boost::format("usrp1 adc - ad9862 - slot %c") % char(dboard_slot)); + return; + + case CODEC_PROP_OTHERS: + val = prop_names_t(); + return; + + case CODEC_PROP_GAIN_NAMES: + val = prop_names_t(1, adc_pga_gain_name); + return; + + case CODEC_PROP_GAIN_RANGE: + UHD_ASSERT_THROW(key.name == adc_pga_gain_name); + val = usrp1_codec_ctrl::rx_pga_gain_range; + return; + + case CODEC_PROP_GAIN_I: + UHD_ASSERT_THROW(key.name == adc_pga_gain_name); + val = _codec_ctrls[dboard_slot]->get_rx_pga_gain('A'); + return; + + case CODEC_PROP_GAIN_Q: + UHD_ASSERT_THROW(key.name == adc_pga_gain_name); + val = _codec_ctrls[dboard_slot]->get_rx_pga_gain('B'); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void usrp1_impl::rx_codec_set(const wax::obj &key_, const wax::obj &val, dboard_slot_t dboard_slot) +{ + named_prop_t key = named_prop_t::extract(key_); + + //handle the set request conditioned on the key + switch(key.as<codec_prop_t>()) { + case CODEC_PROP_GAIN_I: + UHD_ASSERT_THROW(key.name == adc_pga_gain_name); + _codec_ctrls[dboard_slot]->set_rx_pga_gain(val.as<double>(), 'A'); + return; + + case CODEC_PROP_GAIN_Q: + UHD_ASSERT_THROW(key.name == adc_pga_gain_name); + _codec_ctrls[dboard_slot]->set_rx_pga_gain(val.as<double>(), 'B'); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX Codec Properties + **********************************************************************/ +static const std::string dac_pga_gain_name = "PGA"; + +void usrp1_impl::tx_codec_get(const wax::obj &key_, wax::obj &val, dboard_slot_t dboard_slot) +{ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<codec_prop_t>()) { + case CODEC_PROP_NAME: + val = str(boost::format("usrp1 dac - ad9862 - slot %c") % char(dboard_slot)); + return; + + case CODEC_PROP_OTHERS: + val = prop_names_t(); + return; + + case CODEC_PROP_GAIN_NAMES: + val = prop_names_t(1, dac_pga_gain_name); + return; + + case CODEC_PROP_GAIN_RANGE: + UHD_ASSERT_THROW(key.name == dac_pga_gain_name); + val = usrp1_codec_ctrl::tx_pga_gain_range; + return; + + case CODEC_PROP_GAIN_I: //only one gain for I and Q + case CODEC_PROP_GAIN_Q: + UHD_ASSERT_THROW(key.name == dac_pga_gain_name); + val = _codec_ctrls[dboard_slot]->get_tx_pga_gain(); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void usrp1_impl::tx_codec_set(const wax::obj &key_, const wax::obj &val, dboard_slot_t dboard_slot) +{ + named_prop_t key = named_prop_t::extract(key_); + + //handle the set request conditioned on the key + switch(key.as<codec_prop_t>()){ + case CODEC_PROP_GAIN_I: //only one gain for I and Q + case CODEC_PROP_GAIN_Q: + UHD_ASSERT_THROW(key.name == dac_pga_gain_name); + _codec_ctrls[dboard_slot]->set_tx_pga_gain(val.as<double>()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/usrp1/dboard_iface.cpp b/host/lib/usrp/usrp1/dboard_iface.cpp new file mode 100644 index 000000000..3f3a98b7a --- /dev/null +++ b/host/lib/usrp/usrp1/dboard_iface.cpp @@ -0,0 +1,398 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp1_iface.hpp" +#include "usrp1_impl.hpp" +#include "fpga_regs_common.h" +#include "usrp_spi_defs.h" +#include "fpga_regs_standard.h" +#include "clock_ctrl.hpp" +#include "codec_ctrl.hpp" +#include <uhd/usrp/dboard_iface.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/utils/assert_has.hpp> +#include <boost/assign/list_of.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +static const dboard_id_t tvrx_id(0x0040); + +class usrp1_dboard_iface : public dboard_iface { +public: + + usrp1_dboard_iface(usrp1_iface::sptr iface, + usrp1_clock_ctrl::sptr clock, + usrp1_codec_ctrl::sptr codec, + usrp1_impl::dboard_slot_t dboard_slot, + const dboard_id_t &rx_dboard_id + ): + _dboard_slot(dboard_slot), + _rx_dboard_id(rx_dboard_id) + { + _iface = iface; + _clock = clock; + _codec = codec; + + //init the clock rate shadows + this->set_clock_rate(UNIT_RX, this->get_clock_rates(UNIT_RX).front()); + this->set_clock_rate(UNIT_TX, this->get_clock_rates(UNIT_TX).front()); + + //yes this is evil but it's necessary for TVRX to work on USRP1 + if(_rx_dboard_id == tvrx_id) _codec->bypass_adc_buffers(false); + //else _codec->bypass_adc_buffers(false); //don't think this is necessary + } + + ~usrp1_dboard_iface() + { + /* NOP */ + } + + special_props_t get_special_props() + { + special_props_t props; + props.soft_clock_divider = true; + props.mangle_i2c_addrs = (_dboard_slot == usrp1_impl::DBOARD_SLOT_B); + return props; + } + + void write_aux_dac(unit_t, aux_dac_t, double); + double read_aux_adc(unit_t, aux_adc_t); + + void _set_pin_ctrl(unit_t, boost::uint16_t); + void _set_atr_reg(unit_t, atr_reg_t, boost::uint16_t); + void _set_gpio_ddr(unit_t, boost::uint16_t); + void _set_gpio_out(unit_t, boost::uint16_t); + void set_gpio_debug(unit_t, int); + boost::uint16_t read_gpio(unit_t); + + void write_i2c(boost::uint8_t, const byte_vector_t &); + byte_vector_t read_i2c(boost::uint8_t, size_t); + + void write_spi(unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits); + + boost::uint32_t read_write_spi(unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits); + + void set_clock_rate(unit_t, double); + std::vector<double> get_clock_rates(unit_t); + double get_clock_rate(unit_t); + void set_clock_enabled(unit_t, bool); + double get_codec_rate(unit_t); + +private: + usrp1_iface::sptr _iface; + usrp1_clock_ctrl::sptr _clock; + usrp1_codec_ctrl::sptr _codec; + uhd::dict<unit_t, double> _clock_rates; + const usrp1_impl::dboard_slot_t _dboard_slot; + const dboard_id_t &_rx_dboard_id; +}; + +/*********************************************************************** + * Make Function + **********************************************************************/ +dboard_iface::sptr usrp1_impl::make_dboard_iface(usrp1_iface::sptr iface, + usrp1_clock_ctrl::sptr clock, + usrp1_codec_ctrl::sptr codec, + dboard_slot_t dboard_slot, + const dboard_id_t &rx_dboard_id +){ + return dboard_iface::sptr(new usrp1_dboard_iface( + iface, clock, codec, dboard_slot, rx_dboard_id + )); +} + +/*********************************************************************** + * Clock Rates + **********************************************************************/ +static const dboard_id_t dbsrx_classic_id(0x0002); + +/* + * Daughterboard reference clock register + * + * Bit 7 - 1 turns on refclk, 0 allows IO use + * Bits 6:0 - Divider value + */ +void usrp1_dboard_iface::set_clock_rate(unit_t unit, double rate) +{ + assert_has(this->get_clock_rates(unit), rate, "dboard clock rate"); + _clock_rates[unit] = rate; + + if (unit == UNIT_RX && _rx_dboard_id == dbsrx_classic_id){ + size_t divider = size_t(_clock->get_master_clock_freq()/rate); + switch(_dboard_slot){ + case usrp1_impl::DBOARD_SLOT_A: + _iface->poke32(FR_RX_A_REFCLK, (divider & 0x7f) | 0x80); + break; + + case usrp1_impl::DBOARD_SLOT_B: + _iface->poke32(FR_RX_B_REFCLK, (divider & 0x7f) | 0x80); + break; + } + } +} + +std::vector<double> usrp1_dboard_iface::get_clock_rates(unit_t unit) +{ + std::vector<double> rates; + if (unit == UNIT_RX && _rx_dboard_id == dbsrx_classic_id){ + for (size_t div = 1; div <= 127; div++) + rates.push_back(_clock->get_master_clock_freq() / div); + } + else{ + rates.push_back(_clock->get_master_clock_freq()); + } + return rates; +} + +double usrp1_dboard_iface::get_clock_rate(unit_t unit) +{ + return _clock_rates[unit]; +} + +void usrp1_dboard_iface::set_clock_enabled(unit_t, bool) +{ + //TODO we can only enable for special case anyway... +} + +double usrp1_dboard_iface::get_codec_rate(unit_t){ + return _clock->get_master_clock_freq(); +} + +/*********************************************************************** + * GPIO + **********************************************************************/ +void usrp1_dboard_iface::_set_pin_ctrl(unit_t unit, boost::uint16_t value) +{ + switch(unit) { + case UNIT_RX: + if (_dboard_slot == usrp1_impl::DBOARD_SLOT_A) + _iface->poke32(FR_ATR_MASK_1, value); + else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) + _iface->poke32(FR_ATR_MASK_3, value); + break; + case UNIT_TX: + if (_dboard_slot == usrp1_impl::DBOARD_SLOT_A) + _iface->poke32(FR_ATR_MASK_0, value); + else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) + _iface->poke32(FR_ATR_MASK_2, value); + break; + } +} + +void usrp1_dboard_iface::_set_gpio_ddr(unit_t unit, boost::uint16_t value) +{ + switch(unit) { + case UNIT_RX: + if (_dboard_slot == usrp1_impl::DBOARD_SLOT_A) + _iface->poke32(FR_OE_1, 0xffff0000 | value); + else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) + _iface->poke32(FR_OE_3, 0xffff0000 | value); + break; + case UNIT_TX: + if (_dboard_slot == usrp1_impl::DBOARD_SLOT_A) + _iface->poke32(FR_OE_0, 0xffff0000 | value); + else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) + _iface->poke32(FR_OE_2, 0xffff0000 | value); + break; + } +} + +void usrp1_dboard_iface::_set_gpio_out(unit_t unit, boost::uint16_t value) +{ + switch(unit) { + case UNIT_RX: + if (_dboard_slot == usrp1_impl::DBOARD_SLOT_A) + _iface->poke32(FR_IO_1, 0xffff0000 | value); + else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) + _iface->poke32(FR_IO_3, 0xffff0000 | value); + break; + case UNIT_TX: + if (_dboard_slot == usrp1_impl::DBOARD_SLOT_A) + _iface->poke32(FR_IO_0, 0xffff0000 | value); + else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) + _iface->poke32(FR_IO_2, 0xffff0000 | value); + break; + } +} + +void usrp1_dboard_iface::set_gpio_debug(unit_t, int) +{ + /* NOP */ +} + +boost::uint16_t usrp1_dboard_iface::read_gpio(unit_t unit) +{ + boost::uint32_t out_value; + + if (_dboard_slot == usrp1_impl::DBOARD_SLOT_A) + out_value = _iface->peek32(1); + else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) + out_value = _iface->peek32(2); + else + UHD_THROW_INVALID_CODE_PATH(); + + switch(unit) { + case UNIT_RX: + return (boost::uint16_t)((out_value >> 16) & 0x0000ffff); + case UNIT_TX: + return (boost::uint16_t)((out_value >> 0) & 0x0000ffff); + } + UHD_ASSERT_THROW(false); +} + +void usrp1_dboard_iface::_set_atr_reg(unit_t unit, + atr_reg_t atr, boost::uint16_t value) +{ + // Ignore unsupported states + if ((atr == ATR_REG_IDLE) || (atr == ATR_REG_TX_ONLY)) + return; + if(atr == ATR_REG_RX_ONLY) { + switch(unit) { + case UNIT_RX: + if (_dboard_slot == usrp1_impl::DBOARD_SLOT_A) + _iface->poke32(FR_ATR_RXVAL_1, value); + else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) + _iface->poke32(FR_ATR_RXVAL_3, value); + break; + case UNIT_TX: + if (_dboard_slot == usrp1_impl::DBOARD_SLOT_A) + _iface->poke32(FR_ATR_RXVAL_0, value); + else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) + _iface->poke32(FR_ATR_RXVAL_2, value); + break; + } + } else if (atr == ATR_REG_FULL_DUPLEX) { + switch(unit) { + case UNIT_RX: + if (_dboard_slot == usrp1_impl::DBOARD_SLOT_A) + _iface->poke32(FR_ATR_TXVAL_1, value); + else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) + _iface->poke32(FR_ATR_TXVAL_3, value); + break; + case UNIT_TX: + if (_dboard_slot == usrp1_impl::DBOARD_SLOT_A) + _iface->poke32(FR_ATR_TXVAL_0, value); + else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) + _iface->poke32(FR_ATR_TXVAL_2, value); + break; + } + } +} +/*********************************************************************** + * SPI + **********************************************************************/ +/*! + * Static function to convert a unit type to a spi slave device number. + * \param unit the dboard interface unit type enum + * \param slot the side (A or B) the dboard is attached + * \return the slave device number + */ +static boost::uint32_t unit_to_otw_spi_dev(dboard_iface::unit_t unit, + usrp1_impl::dboard_slot_t slot) +{ + switch(unit) { + case dboard_iface::UNIT_TX: + if (slot == usrp1_impl::DBOARD_SLOT_A) + return SPI_ENABLE_TX_A; + else if (slot == usrp1_impl::DBOARD_SLOT_B) + return SPI_ENABLE_TX_B; + else + break; + case dboard_iface::UNIT_RX: + if (slot == usrp1_impl::DBOARD_SLOT_A) + return SPI_ENABLE_RX_A; + else if (slot == usrp1_impl::DBOARD_SLOT_B) + return SPI_ENABLE_RX_B; + else + break; + } + UHD_THROW_INVALID_CODE_PATH(); +} + +void usrp1_dboard_iface::write_spi(unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits) +{ + _iface->write_spi(unit_to_otw_spi_dev(unit, _dboard_slot), + config, data, num_bits); +} + +boost::uint32_t usrp1_dboard_iface::read_write_spi(unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits) +{ + return _iface->read_spi(unit_to_otw_spi_dev(unit, _dboard_slot), + config, data, num_bits); +} + +/*********************************************************************** + * I2C + **********************************************************************/ +void usrp1_dboard_iface::write_i2c(boost::uint8_t addr, + const byte_vector_t &bytes) +{ + return _iface->write_i2c(addr, bytes); +} + +byte_vector_t usrp1_dboard_iface::read_i2c(boost::uint8_t addr, + size_t num_bytes) +{ + return _iface->read_i2c(addr, num_bytes); +} + +/*********************************************************************** + * Aux DAX/ADC + **********************************************************************/ +void usrp1_dboard_iface::write_aux_dac(dboard_iface::unit_t, + aux_dac_t which, double value) +{ + //same aux dacs for each unit + static const uhd::dict<aux_dac_t, usrp1_codec_ctrl::aux_dac_t> + which_to_aux_dac = map_list_of + (AUX_DAC_A, usrp1_codec_ctrl::AUX_DAC_A) + (AUX_DAC_B, usrp1_codec_ctrl::AUX_DAC_B) + (AUX_DAC_C, usrp1_codec_ctrl::AUX_DAC_C) + (AUX_DAC_D, usrp1_codec_ctrl::AUX_DAC_D); + + _codec->write_aux_dac(which_to_aux_dac[which], value); +} + +double usrp1_dboard_iface::read_aux_adc(dboard_iface::unit_t unit, + aux_adc_t which) +{ + static const + uhd::dict<unit_t, uhd::dict<aux_adc_t, usrp1_codec_ctrl::aux_adc_t> > + unit_to_which_to_aux_adc = map_list_of(UNIT_RX, map_list_of + (AUX_ADC_A, usrp1_codec_ctrl::AUX_ADC_A1) + (AUX_ADC_B, usrp1_codec_ctrl::AUX_ADC_B1)) + (UNIT_TX, map_list_of + (AUX_ADC_A, usrp1_codec_ctrl::AUX_ADC_A2) + (AUX_ADC_B, usrp1_codec_ctrl::AUX_ADC_B2)); + + return _codec->read_aux_adc(unit_to_which_to_aux_adc[unit][which]); +} diff --git a/host/lib/usrp/usrp1/dboard_impl.cpp b/host/lib/usrp/usrp1/dboard_impl.cpp new file mode 100644 index 000000000..02906fc45 --- /dev/null +++ b/host/lib/usrp/usrp1/dboard_impl.cpp @@ -0,0 +1,208 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp1_impl.hpp" +#include "usrp_i2c_addr.h" +#include <uhd/usrp/dsp_utils.hpp> +#include <uhd/usrp/misc_utils.hpp> +#include <uhd/exception.hpp> +#include <uhd/usrp/dboard_props.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <boost/bind.hpp> +#include <boost/foreach.hpp> +#include <boost/format.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * Helper Functions + **********************************************************************/ +static boost::uint8_t get_rx_ee_addr(usrp1_impl::dboard_slot_t dboard_slot){ + switch(dboard_slot){ + case usrp1_impl::DBOARD_SLOT_A: return I2C_ADDR_RX_A; + case usrp1_impl::DBOARD_SLOT_B: return I2C_ADDR_RX_B; + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +static boost::uint8_t get_tx_ee_addr(usrp1_impl::dboard_slot_t dboard_slot){ + switch(dboard_slot){ + case usrp1_impl::DBOARD_SLOT_A: return I2C_ADDR_TX_A; + case usrp1_impl::DBOARD_SLOT_B: return I2C_ADDR_TX_B; + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +/*********************************************************************** + * Dboard Initialization + **********************************************************************/ +void usrp1_impl::dboard_init(void) +{ + BOOST_FOREACH(dboard_slot_t dboard_slot, _dboard_slots){ + + //read the tx and rx dboard eeproms + _rx_db_eeproms[dboard_slot].load(*_iface, get_rx_ee_addr(dboard_slot)); + _tx_db_eeproms[dboard_slot].load(*_iface, get_tx_ee_addr(dboard_slot)); + + //create a new dboard interface and manager + _dboard_ifaces[dboard_slot] = make_dboard_iface( + _iface, _clock_ctrl, _codec_ctrls[dboard_slot], + dboard_slot, _rx_db_eeproms[dboard_slot].id + ); + + _dboard_managers[dboard_slot] = dboard_manager::make( + _rx_db_eeproms[dboard_slot].id, + _tx_db_eeproms[dboard_slot].id, + _dboard_ifaces[dboard_slot] + ); + + //setup the dboard proxies + _rx_dboard_proxies[dboard_slot] = wax_obj_proxy::make( + boost::bind(&usrp1_impl::rx_dboard_get, this, _1, _2, dboard_slot), + boost::bind(&usrp1_impl::rx_dboard_set, this, _1, _2, dboard_slot)); + + _tx_dboard_proxies[dboard_slot] = wax_obj_proxy::make( + boost::bind(&usrp1_impl::tx_dboard_get, this, _1, _2, dboard_slot), + boost::bind(&usrp1_impl::tx_dboard_set, this, _1, _2, dboard_slot)); + } + +} + +/*********************************************************************** + * RX Dboard Get + **********************************************************************/ +void usrp1_impl::rx_dboard_get(const wax::obj &key_, wax::obj &val, dboard_slot_t dboard_slot) +{ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_NAME: + val = str(boost::format("usrp1 dboard (rx unit) - %c") % char(dboard_slot)); + return; + + case DBOARD_PROP_SUBDEV: + val = _dboard_managers[dboard_slot]->get_rx_subdev(key.name); + return; + + case DBOARD_PROP_SUBDEV_NAMES: + val = _dboard_managers[dboard_slot]->get_rx_subdev_names(); + return; + + case DBOARD_PROP_DBOARD_EEPROM: + val = _rx_db_eeproms[dboard_slot]; + return; + + case DBOARD_PROP_DBOARD_IFACE: + val = _dboard_ifaces[dboard_slot]; + return; + + case DBOARD_PROP_CODEC: + val = _rx_codec_proxies[dboard_slot]->get_link(); + return; + + case DBOARD_PROP_GAIN_GROUP: + val = make_gain_group( + _rx_db_eeproms[dboard_slot].id, + _dboard_managers[dboard_slot]->get_rx_subdev(key.name), + _rx_codec_proxies[dboard_slot]->get_link(), + GAIN_GROUP_POLICY_RX + ); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * RX Dboard Set + **********************************************************************/ +void usrp1_impl::rx_dboard_set(const wax::obj &key, const wax::obj &val, dboard_slot_t dboard_slot) +{ + switch(key.as<dboard_prop_t>()) { + case DBOARD_PROP_DBOARD_EEPROM: + _rx_db_eeproms[dboard_slot] = val.as<dboard_eeprom_t>(); + _rx_db_eeproms[dboard_slot].store(*_iface, get_rx_ee_addr(dboard_slot)); + return; + + default: + UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX Dboard Get + **********************************************************************/ +void usrp1_impl::tx_dboard_get(const wax::obj &key_, wax::obj &val, dboard_slot_t dboard_slot) +{ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_NAME: + val = str(boost::format("usrp1 dboard (tx unit) - %c") % char(dboard_slot)); + return; + + case DBOARD_PROP_SUBDEV: + val = _dboard_managers[dboard_slot]->get_tx_subdev(key.name); + return; + + case DBOARD_PROP_SUBDEV_NAMES: + val = _dboard_managers[dboard_slot]->get_tx_subdev_names(); + return; + + case DBOARD_PROP_DBOARD_EEPROM: + val = _tx_db_eeproms[dboard_slot]; + return; + + case DBOARD_PROP_DBOARD_IFACE: + val = _dboard_ifaces[dboard_slot]; + return; + + case DBOARD_PROP_CODEC: + val = _tx_codec_proxies[dboard_slot]->get_link(); + return; + + case DBOARD_PROP_GAIN_GROUP: + val = make_gain_group( + _tx_db_eeproms[dboard_slot].id, + _dboard_managers[dboard_slot]->get_tx_subdev(key.name), + _tx_codec_proxies[dboard_slot]->get_link(), + GAIN_GROUP_POLICY_TX + ); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * TX Dboard Set + **********************************************************************/ +void usrp1_impl::tx_dboard_set(const wax::obj &key, const wax::obj &val, dboard_slot_t dboard_slot) +{ + switch(key.as<dboard_prop_t>()) { + case DBOARD_PROP_DBOARD_EEPROM: + _tx_db_eeproms[dboard_slot] = val.as<dboard_eeprom_t>(); + _tx_db_eeproms[dboard_slot].store(*_iface, get_tx_ee_addr(dboard_slot)); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/usrp1/dsp_impl.cpp b/host/lib/usrp/usrp1/dsp_impl.cpp new file mode 100644 index 000000000..8152c4e34 --- /dev/null +++ b/host/lib/usrp/usrp1/dsp_impl.cpp @@ -0,0 +1,221 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp1_impl.hpp" +#include "fpga_regs_standard.h" +#include <uhd/usrp/dsp_utils.hpp> +#include <uhd/usrp/dsp_props.hpp> +#include <boost/bind.hpp> +#include <boost/format.hpp> +#include <boost/lexical_cast.hpp> +#include <boost/assign/list_of.hpp> +#include <iostream> +#include <cmath> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * RX DDC Initialization + **********************************************************************/ +void usrp1_impl::rx_dsp_init(void) +{ + for (size_t i = 0; i < this->get_num_ddcs(); i++){ + _rx_dsp_proxies[str(boost::format("DSP%d")%i)] = wax_obj_proxy::make( + boost::bind(&usrp1_impl::rx_dsp_get, this, _1, _2, i), + boost::bind(&usrp1_impl::rx_dsp_set, this, _1, _2, i) + ); + rx_dsp_set(DSP_PROP_HOST_RATE, _clock_ctrl->get_master_clock_freq() / 16, i); + } +} + +/*********************************************************************** + * RX DDC Get + **********************************************************************/ +void usrp1_impl::rx_dsp_get(const wax::obj &key_, wax::obj &val, size_t which_dsp){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + case DSP_PROP_NAME: + val = str(boost::format("usrp1 ddc%d %s") + % which_dsp + % (this->has_rx_halfband()? "+ hb" : "") + ); + return; + + case DSP_PROP_OTHERS: + val = prop_names_t(); + return; + + case DSP_PROP_FREQ_SHIFT: + val = _rx_dsp_freqs[which_dsp]; + return; + + case DSP_PROP_CODEC_RATE: + val = _clock_ctrl->get_master_clock_freq(); + return; + + case DSP_PROP_HOST_RATE: + val = _clock_ctrl->get_master_clock_freq()/_rx_dsp_decim; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } + +} + +/*********************************************************************** + * RX DDC Set + **********************************************************************/ +void usrp1_impl::rx_dsp_set(const wax::obj &key_, const wax::obj &val, size_t which_dsp){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()) { + case DSP_PROP_FREQ_SHIFT: { + double new_freq = val.as<double>(); + boost::uint32_t reg_word = dsp_type1::calc_cordic_word_and_update( + new_freq, _clock_ctrl->get_master_clock_freq()); + + static const boost::uint32_t dsp_index_to_reg_val[4] = { + FR_RX_FREQ_0, FR_RX_FREQ_1, FR_RX_FREQ_2, FR_RX_FREQ_3 + }; + _iface->poke32(dsp_index_to_reg_val[which_dsp], ~reg_word + 1); + _rx_dsp_freqs[which_dsp] = new_freq; + return; + } + + case DSP_PROP_HOST_RATE: + if (which_dsp != 0) return; //only for dsp[0] as this is vectorized + { + size_t rate = size_t(_clock_ctrl->get_master_clock_freq() / val.as<double>()); + + if ((rate & 0x01) || (rate < 4) || (rate > 256)) { + std::cerr << "Decimation must be even and between 4 and 256" + << std::endl; + return; + } + + _rx_dsp_decim = rate; + //TODO Poll every 100ms. Make it selectable? + _rx_samps_per_poll_interval = size_t(0.1 * _clock_ctrl->get_master_clock_freq() / rate); + + _iface->poke32(FR_DECIM_RATE, _rx_dsp_decim/2 - 1); + } + return; + + case DSP_PROP_STREAM_CMD: + if (which_dsp != 0) return; //only for dsp[0] as this is vectorized + _soft_time_ctrl->issue_stream_cmd(val.as<stream_cmd_t>()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } + +} + +/*********************************************************************** + * TX DUC Initialization + **********************************************************************/ +void usrp1_impl::tx_dsp_init(void) +{ + for (size_t i = 0; i < this->get_num_ducs(); i++){ + _tx_dsp_proxies[str(boost::format("DSP%d")%i)] = wax_obj_proxy::make( + boost::bind(&usrp1_impl::tx_dsp_get, this, _1, _2, i), + boost::bind(&usrp1_impl::tx_dsp_set, this, _1, _2, i) + ); + tx_dsp_set(DSP_PROP_HOST_RATE, _clock_ctrl->get_master_clock_freq() / 16, i); + } +} + +/*********************************************************************** + * TX DUC Get + **********************************************************************/ +void usrp1_impl::tx_dsp_get(const wax::obj &key_, wax::obj &val, size_t which_dsp){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()) { + case DSP_PROP_NAME: + val = str(boost::format("usrp1 duc%d %s") + % which_dsp + % (this->has_tx_halfband()? "+ hb" : "") + ); + return; + + case DSP_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case DSP_PROP_FREQ_SHIFT: + val = _tx_dsp_freqs[which_dsp]; + return; + + case DSP_PROP_CODEC_RATE: + val = _clock_ctrl->get_master_clock_freq() * 2; + return; + + case DSP_PROP_HOST_RATE: + val = _clock_ctrl->get_master_clock_freq() * 2 / _tx_dsp_interp; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } + +} + +/*********************************************************************** + * TX DUC Set + **********************************************************************/ +void usrp1_impl::tx_dsp_set(const wax::obj &key_, const wax::obj &val, size_t which_dsp){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()) { + + case DSP_PROP_FREQ_SHIFT: { + double new_freq = val.as<double>(); + + //map the freq shift key to a subdev spec to a particular codec chip + std::string db_name = _tx_subdev_spec.at(which_dsp).db_name; + if (db_name == "A") _codec_ctrls[DBOARD_SLOT_A]->set_duc_freq(new_freq); + if (db_name == "B") _codec_ctrls[DBOARD_SLOT_B]->set_duc_freq(new_freq); + + _tx_dsp_freqs[which_dsp] = new_freq; + return; + } + + case DSP_PROP_HOST_RATE: + if (which_dsp != 0) return; //only for dsp[0] as this is vectorized + { + size_t rate = size_t(_clock_ctrl->get_master_clock_freq() * 2 / val.as<double>()); + + if ((rate & 0x01) || (rate < 8) || (rate > 512)) { + std::cerr << "Interpolation rate must be even and between 8 and 512" + << std::endl; + return; + } + + _tx_dsp_interp = rate; + + //TODO Poll every 100ms. Make it selectable? + _tx_samps_per_poll_interval = size_t(0.1 * _clock_ctrl->get_master_clock_freq() * 2 / rate); + + _iface->poke32(FR_INTERP_RATE, _tx_dsp_interp / 4 - 1); + return; + } + default: UHD_THROW_PROP_SET_ERROR(); + } + +} diff --git a/host/lib/usrp/usrp1/io_impl.cpp b/host/lib/usrp/usrp1/io_impl.cpp new file mode 100644 index 000000000..b3268298e --- /dev/null +++ b/host/lib/usrp/usrp1/io_impl.cpp @@ -0,0 +1,378 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "../../transport/vrt_packet_handler.hpp" +#include "usrp_commands.h" +#include "usrp1_impl.hpp" +#include <uhd/utils/safe_call.hpp> +#include <uhd/utils/thread_priority.hpp> +#include <uhd/transport/bounded_buffer.hpp> +#include <boost/bind.hpp> +#include <boost/format.hpp> +#include <boost/asio.hpp> +#include <boost/bind.hpp> +#include <boost/thread.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; +namespace asio = boost::asio; + +static const size_t alignment_padding = 512; + +/*********************************************************************** + * Helper struct to associate an offset with a buffer + **********************************************************************/ +struct offset_send_buffer{ + offset_send_buffer(void){ + /* NOP */ + } + + offset_send_buffer(managed_send_buffer::sptr buff, size_t offset = 0): + buff(buff), offset(offset) + { + /* NOP */ + } + + //member variables + managed_send_buffer::sptr buff; + size_t offset; /* in bytes */ +}; + +/*********************************************************************** + * Reusable managed send buffer to handle aligned commits + **********************************************************************/ +class offset_managed_send_buffer : public managed_send_buffer{ +public: + typedef boost::function<void(offset_send_buffer&, offset_send_buffer&, size_t)> commit_cb_type; + offset_managed_send_buffer(const commit_cb_type &commit_cb): + _expired(true), _commit_cb(commit_cb) + { + /* NOP */ + } + + bool expired(void){return _expired;} + + void commit(size_t size){ + if (_expired) return; + this->_commit_cb(_curr_buff, _next_buff, size); + _expired = true; + } + + sptr get_new( + offset_send_buffer &curr_buff, + offset_send_buffer &next_buff + ){ + _expired = false; + _curr_buff = curr_buff; + _next_buff = next_buff; + return sptr(this, &offset_managed_send_buffer::fake_deleter); + } + +private: + static void fake_deleter(void *){ + //dont do anything and assume the bastard committed it + //static_cast<offset_managed_send_buffer *>(obj)->commit(0); + } + + void *get_buff(void) const{return _curr_buff.buff->cast<char *>() + _curr_buff.offset;} + size_t get_size(void) const{return _curr_buff.buff->size() - _curr_buff.offset;} + + bool _expired; + offset_send_buffer _curr_buff, _next_buff; + commit_cb_type _commit_cb; +}; + +/*********************************************************************** + * IO Implementation Details + **********************************************************************/ +struct usrp1_impl::io_impl{ + io_impl(zero_copy_if::sptr data_transport): + data_transport(data_transport), + get_recv_buffs_fcn(boost::bind(&usrp1_impl::io_impl::get_recv_buffs, this, _1)), + get_send_buffs_fcn(boost::bind(&usrp1_impl::io_impl::get_send_buffs, this, _1)), + underflow_poll_samp_count(0), + overflow_poll_samp_count(0), + curr_buff(offset_send_buffer(data_transport->get_send_buff())), + omsb(boost::bind(&usrp1_impl::io_impl::commit_send_buff, this, _1, _2, _3)) + { + /* NOP */ + } + + ~io_impl(void){ + UHD_SAFE_CALL(flush_send_buff();) + } + + zero_copy_if::sptr data_transport; + + //timeouts set on calls to recv/send (passed into get buffs methods) + double recv_timeout, send_timeout; + + //bound callbacks for get buffs (bound once here, not in fast-path) + vrt_packet_handler::get_recv_buffs_t get_recv_buffs_fcn; + vrt_packet_handler::get_send_buffs_t get_send_buffs_fcn; + + //state management for the vrt packet handler code + vrt_packet_handler::recv_state packet_handler_recv_state; + vrt_packet_handler::send_state packet_handler_send_state; + + //state management for overflow and underflow + size_t underflow_poll_samp_count; + size_t overflow_poll_samp_count; + + //wrapper around the actual send buffer interface + //all of this to ensure only aligned lengths are committed + //NOTE: you must commit before getting a new buffer + //since the vrt packet handler obeys this, we are ok + offset_send_buffer curr_buff; + offset_managed_send_buffer omsb; + void commit_send_buff(offset_send_buffer&, offset_send_buffer&, size_t); + void flush_send_buff(void); + bool get_send_buffs(vrt_packet_handler::managed_send_buffs_t &); + bool get_recv_buffs(vrt_packet_handler::managed_recv_buffs_t &buffs){ + UHD_ASSERT_THROW(buffs.size() == 1); + buffs[0] = data_transport->get_recv_buff(recv_timeout); + return buffs[0].get() != NULL; + } +}; + +/*! + * Perform an actual commit on the send buffer: + * Copy the remainder of alignment to the next buffer. + * Commit the current buffer at multiples of alignment. + */ +void usrp1_impl::io_impl::commit_send_buff( + offset_send_buffer &curr, + offset_send_buffer &next, + size_t num_bytes +){ + //total number of bytes now in the current buffer + size_t bytes_in_curr_buffer = curr.offset + num_bytes; + + //calculate how many to commit and remainder + size_t num_bytes_remaining = bytes_in_curr_buffer % alignment_padding; + size_t num_bytes_to_commit = bytes_in_curr_buffer - num_bytes_remaining; + + //copy the remainder into the next buffer + std::memcpy( + next.buff->cast<char *>() + next.offset, + curr.buff->cast<char *>() + num_bytes_to_commit, + num_bytes_remaining + ); + + //update the offset into the next buffer + next.offset += num_bytes_remaining; + + //commit the current buffer + curr.buff->commit(num_bytes_to_commit); +} + +/*! + * Flush the current buffer by padding out to alignment and committing. + */ +void usrp1_impl::io_impl::flush_send_buff(void){ + //calculate the number of bytes to alignment + size_t bytes_to_pad = (-1*curr_buff.offset)%alignment_padding; + + //send at least alignment_padding to guarantee zeros are sent + if (bytes_to_pad == 0) bytes_to_pad = alignment_padding; + + //get the buffer, clear, and commit (really current buffer) + vrt_packet_handler::managed_send_buffs_t buffs(1); + if (this->get_send_buffs(buffs)){ + std::memset(buffs[0]->cast<void *>(), 0, bytes_to_pad); + buffs[0]->commit(bytes_to_pad); + } +} + +/*! + * Get a managed send buffer with the alignment padding: + * Always grab the next send buffer so we can timeout here. + */ +bool usrp1_impl::io_impl::get_send_buffs( + vrt_packet_handler::managed_send_buffs_t &buffs +){ + UHD_ASSERT_THROW(omsb.expired() and buffs.size() == 1); + + //try to get a new managed buffer with timeout + offset_send_buffer next_buff(data_transport->get_send_buff(send_timeout)); + if (not next_buff.buff.get()) return false; /* propagate timeout here */ + + //make a new managed buffer with the offset buffs + buffs[0] = omsb.get_new(curr_buff, next_buff); + + //store the next buffer for the next call + curr_buff = next_buff; + + return true; +} + +/*********************************************************************** + * Initialize internals within this file + **********************************************************************/ +void usrp1_impl::io_init(void){ + _rx_otw_type.width = 16; + _rx_otw_type.shift = 0; + _rx_otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; + + _tx_otw_type.width = 16; + _tx_otw_type.shift = 0; + _tx_otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; + + _io_impl = UHD_PIMPL_MAKE(io_impl, (_data_transport)); + + _soft_time_ctrl = soft_time_ctrl::make( + boost::bind(&usrp1_impl::rx_stream_on_off, this, _1) + ); + + rx_stream_on_off(false); + _io_impl->flush_send_buff(); +} + +void usrp1_impl::rx_stream_on_off(bool enb){ + return _iface->write_firmware_cmd(VRQ_FPGA_SET_RX_ENABLE, enb, 0, 0, 0); + //drain any junk in the receive transport after stop streaming command + while(not enb and _data_transport->get_recv_buff().get() != NULL){ + /* NOP */ + } +} + +/*********************************************************************** + * Data send + helper functions + **********************************************************************/ +static void usrp1_bs_vrt_packer( + boost::uint32_t *, + vrt::if_packet_info_t &if_packet_info +){ + if_packet_info.num_header_words32 = 0; + if_packet_info.num_packet_words32 = if_packet_info.num_payload_words32; +} + +size_t usrp1_impl::get_max_send_samps_per_packet(void) const { + return (_data_transport->get_send_frame_size() - alignment_padding) + / _tx_otw_type.get_sample_size() + / _tx_subdev_spec.size() + ; +} + +size_t usrp1_impl::send( + const send_buffs_type &buffs, size_t num_samps, + const tx_metadata_t &metadata, const io_type_t &io_type, + send_mode_t send_mode, double timeout +){ + if (_soft_time_ctrl->send_pre(metadata, timeout)) return num_samps; + + _io_impl->send_timeout = timeout; + size_t num_samps_sent = vrt_packet_handler::send( + _io_impl->packet_handler_send_state, //last state of the send handler + buffs, num_samps, //buffer to fill + metadata, send_mode, //samples metadata + io_type, _tx_otw_type, //input and output types to convert + _clock_ctrl->get_master_clock_freq(), //master clock tick rate + &usrp1_bs_vrt_packer, + _io_impl->get_send_buffs_fcn, + get_max_send_samps_per_packet(), + 0, //vrt header offset + _tx_subdev_spec.size() //num channels + ); + + //handle eob flag (commit the buffer, disable the DACs) + //check num samps sent to avoid flush on incomplete/timeout + if (metadata.end_of_burst and num_samps_sent == num_samps){ + _io_impl->flush_send_buff(); + } + + //handle the polling for underflow conditions + _io_impl->underflow_poll_samp_count += num_samps_sent; + if (_io_impl->underflow_poll_samp_count >= _tx_samps_per_poll_interval){ + _io_impl->underflow_poll_samp_count = 0; //reset count + boost::uint8_t underflow = 0; + ssize_t ret = _ctrl_transport->usrp_control_read( + VRQ_GET_STATUS, 0, GS_TX_UNDERRUN, + &underflow, sizeof(underflow) + ); + if (ret < 0) std::cerr << "USRP: underflow check failed" << std::endl; + else if (underflow) std::cerr << "U" << std::flush; + } + + return num_samps_sent; +} + +/*********************************************************************** + * Data recv + helper functions + **********************************************************************/ +static void usrp1_bs_vrt_unpacker( + const boost::uint32_t *, + vrt::if_packet_info_t &if_packet_info +){ + if_packet_info.packet_type = vrt::if_packet_info_t::PACKET_TYPE_DATA; + if_packet_info.num_payload_words32 = if_packet_info.num_packet_words32; + if_packet_info.num_header_words32 = 0; + if_packet_info.packet_count = 0; + if_packet_info.sob = false; + if_packet_info.eob = false; + if_packet_info.has_sid = false; + if_packet_info.has_cid = false; + if_packet_info.has_tsi = false; + if_packet_info.has_tsf = false; + if_packet_info.has_tlr = false; +} + +size_t usrp1_impl::get_max_recv_samps_per_packet(void) const { + return _data_transport->get_recv_frame_size() + / _rx_otw_type.get_sample_size() + / _rx_subdev_spec.size() + ; +} + +size_t usrp1_impl::recv( + const recv_buffs_type &buffs, size_t num_samps, + rx_metadata_t &metadata, const io_type_t &io_type, + recv_mode_t recv_mode, double timeout +){ + _io_impl->recv_timeout = timeout; + size_t num_samps_recvd = vrt_packet_handler::recv( + _io_impl->packet_handler_recv_state, //last state of the recv handler + buffs, num_samps, //buffer to fill + metadata, recv_mode, //samples metadata + io_type, _rx_otw_type, //input and output types to convert + _clock_ctrl->get_master_clock_freq(), //master clock tick rate + &usrp1_bs_vrt_unpacker, + _io_impl->get_recv_buffs_fcn, + &vrt_packet_handler::handle_overflow_nop, + 0, //vrt header offset + _rx_subdev_spec.size() //num channels + ); + + _soft_time_ctrl->recv_post(metadata, num_samps_recvd); + + //handle the polling for overflow conditions + _io_impl->overflow_poll_samp_count += num_samps_recvd; + if (_io_impl->overflow_poll_samp_count >= _rx_samps_per_poll_interval){ + _io_impl->overflow_poll_samp_count = 0; //reset count + boost::uint8_t overflow = 0; + ssize_t ret = _ctrl_transport->usrp_control_read( + VRQ_GET_STATUS, 0, GS_RX_OVERRUN, + &overflow, sizeof(overflow) + ); + if (ret < 0) std::cerr << "USRP: overflow check failed" << std::endl; + else if (overflow) std::cerr << "O" << std::flush; + } + + return num_samps_recvd; +} diff --git a/host/lib/usrp/usrp1/mboard_impl.cpp b/host/lib/usrp/usrp1/mboard_impl.cpp new file mode 100644 index 000000000..4e2fad6e5 --- /dev/null +++ b/host/lib/usrp/usrp1/mboard_impl.cpp @@ -0,0 +1,386 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp1_impl.hpp" +#include "usrp_commands.h" +#include "fpga_regs_standard.h" +#include "fpga_regs_common.h" +#include "usrp_i2c_addr.h" +#include <uhd/usrp/misc_utils.hpp> +#include <uhd/usrp/mboard_props.hpp> +#include <uhd/usrp/dboard_props.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/utils/warning.hpp> +#include <uhd/utils/assert_has.hpp> +#include <uhd/utils/images.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/foreach.hpp> +#include <boost/bind.hpp> +#include <boost/thread/thread.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; + +static const bool usrp1_mboard_verbose = false; + +/*********************************************************************** + * Calculate the RX mux value: + * The I and Q mux values are intentionally reversed to flip I and Q + * to account for the reversal in the type conversion routines. + **********************************************************************/ +static int calc_rx_mux_pair(int adc_for_i, int adc_for_q){ + return (adc_for_i << 2) | (adc_for_q << 0); //shift reversal here +} + +/*! + * 3 2 1 0 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-----------------------+-------+-------+-------+-------+-+-----+ + * | must be zero | Q3| I3| Q2| I2| Q1| I1| Q0| I0|Z| NCH | + * +-----------------------+-------+-------+-------+-------+-+-----+ + */ +static boost::uint32_t calc_rx_mux( + const subdev_spec_t &subdev_spec, wax::obj mboard +){ + //create look-up-table for mapping dboard name and connection type to ADC flags + static const int ADC0 = 0, ADC1 = 1, ADC2 = 2, ADC3 = 3; + static const uhd::dict<std::string, uhd::dict<subdev_conn_t, int> > name_to_conn_to_flag = boost::assign::map_list_of + ("A", boost::assign::map_list_of + (SUBDEV_CONN_COMPLEX_IQ, calc_rx_mux_pair(ADC0, ADC1)) //I and Q + (SUBDEV_CONN_COMPLEX_QI, calc_rx_mux_pair(ADC1, ADC0)) //I and Q + (SUBDEV_CONN_REAL_I, calc_rx_mux_pair(ADC0, ADC0)) //I and Q (Q identical but ignored Z=1) + (SUBDEV_CONN_REAL_Q, calc_rx_mux_pair(ADC1, ADC1)) //I and Q (Q identical but ignored Z=1) + ) + ("B", boost::assign::map_list_of + (SUBDEV_CONN_COMPLEX_IQ, calc_rx_mux_pair(ADC2, ADC3)) //I and Q + (SUBDEV_CONN_COMPLEX_QI, calc_rx_mux_pair(ADC3, ADC2)) //I and Q + (SUBDEV_CONN_REAL_I, calc_rx_mux_pair(ADC2, ADC2)) //I and Q (Q identical but ignored Z=1) + (SUBDEV_CONN_REAL_Q, calc_rx_mux_pair(ADC3, ADC3)) //I and Q (Q identical but ignored Z=1) + ) + ; + + //extract the number of channels + size_t nchan = subdev_spec.size(); + + //calculate the channel flags + int channel_flags = 0; + size_t num_reals = 0, num_quads = 0; + BOOST_FOREACH(const subdev_spec_pair_t &pair, subdev_spec){ + wax::obj dboard = mboard[named_prop_t(MBOARD_PROP_RX_DBOARD, pair.db_name)]; + wax::obj subdev = dboard[named_prop_t(DBOARD_PROP_SUBDEV, pair.sd_name)]; + subdev_conn_t conn = subdev[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>(); + switch(conn){ + case SUBDEV_CONN_COMPLEX_IQ: + case SUBDEV_CONN_COMPLEX_QI: num_quads++; break; + case SUBDEV_CONN_REAL_I: + case SUBDEV_CONN_REAL_Q: num_reals++; break; + } + channel_flags = (channel_flags << 4) | name_to_conn_to_flag[pair.db_name][conn]; + } + + //calculate Z: + // for all real sources: Z = 1 + // for all quadrature sources: Z = 0 + // for mixed sources: warning + Z = 0 + int Z = (num_quads > 0)? 0 : 1; + if (num_quads != 0 and num_reals != 0) uhd::warning::post( + "Mixing real and quadrature rx subdevices is not supported.\n" + "The Q input to the real source(s) will be non-zero.\n" + ); + + //calculate the rx mux value + return ((channel_flags & 0xffff) << 4) | ((Z & 0x1) << 3) | ((nchan & 0x7) << 0); +} + +/*********************************************************************** + * Calculate the TX mux value: + * The I and Q mux values are intentionally reversed to flip I and Q + * to account for the reversal in the type conversion routines. + **********************************************************************/ +static int calc_tx_mux_pair(int chn_for_i, int chn_for_q){ + return (chn_for_i << 4) | (chn_for_q << 0); //shift reversal here +} + +/*! + * 3 2 1 0 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-----------------------+-------+-------+-------+-------+-+-----+ + * | | DAC1Q | DAC1I | DAC0Q | DAC0I |0| NCH | + * +-----------------------------------------------+-------+-+-----+ + */ +static boost::uint32_t calc_tx_mux( + const subdev_spec_t &subdev_spec, wax::obj mboard +){ + //create look-up-table for mapping channel number and connection type to flags + static const int ENB = 1 << 3, CHAN_I0 = 0, CHAN_Q0 = 1, CHAN_I1 = 2, CHAN_Q1 = 3; + static const uhd::dict<size_t, uhd::dict<subdev_conn_t, int> > chan_to_conn_to_flag = boost::assign::map_list_of + (0, boost::assign::map_list_of + (SUBDEV_CONN_COMPLEX_IQ, calc_tx_mux_pair(CHAN_I0 | ENB, CHAN_Q0 | ENB)) + (SUBDEV_CONN_COMPLEX_QI, calc_tx_mux_pair(CHAN_Q0 | ENB, CHAN_I0 | ENB)) + (SUBDEV_CONN_REAL_I, calc_tx_mux_pair(CHAN_I0 | ENB, 0 )) + (SUBDEV_CONN_REAL_Q, calc_tx_mux_pair(0, CHAN_I0 | ENB)) + ) + (1, boost::assign::map_list_of + (SUBDEV_CONN_COMPLEX_IQ, calc_tx_mux_pair(CHAN_I1 | ENB, CHAN_Q1 | ENB)) + (SUBDEV_CONN_COMPLEX_QI, calc_tx_mux_pair(CHAN_Q1 | ENB, CHAN_I1 | ENB)) + (SUBDEV_CONN_REAL_I, calc_tx_mux_pair(CHAN_I1 | ENB, 0 )) + (SUBDEV_CONN_REAL_Q, calc_tx_mux_pair(0, CHAN_I1 | ENB)) + ) + ; + + //extract the number of channels + size_t nchan = subdev_spec.size(); + + //calculate the channel flags + int channel_flags = 0, chan = 0; + uhd::dict<std::string, int> slot_to_chan_count = boost::assign::map_list_of("A", 0)("B", 0); + BOOST_FOREACH(const subdev_spec_pair_t &pair, subdev_spec){ + wax::obj dboard = mboard[named_prop_t(MBOARD_PROP_TX_DBOARD, pair.db_name)]; + wax::obj subdev = dboard[named_prop_t(DBOARD_PROP_SUBDEV, pair.sd_name)]; + subdev_conn_t conn = subdev[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>(); + + //combine the channel flags: shift for slot A vs B + if (pair.db_name == "A") channel_flags |= chan_to_conn_to_flag[chan][conn] << 0; + if (pair.db_name == "B") channel_flags |= chan_to_conn_to_flag[chan][conn] << 8; + + //sanity check, only 1 channel per slot + slot_to_chan_count[pair.db_name]++; + if (slot_to_chan_count[pair.db_name] > 1){ + throw uhd::value_error(str(boost::format( + "dboard slot %s assigned to multiple channels in subdev spec %s" + ) % pair.db_name % subdev_spec.to_string())); + } + + //increment for the next channel + chan++; + } + + //calculate the tx mux value + return ((channel_flags & 0xffff) << 4) | ((nchan & 0x7) << 0); +} + +/*! + * Capabilities Register + * + * 3 2 1 0 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-----------------------------------------------+-+-----+-+-----+ + * | Reserved |T|DUCs |R|DDCs | + * +-----------------------------------------------+-+-----+-+-----+ + */ +size_t usrp1_impl::get_num_ddcs(void){ + boost::uint32_t regval = _iface->peek32(FR_RB_CAPS); + return (regval >> 0) & 0x0007; +} + +size_t usrp1_impl::get_num_ducs(void){ + boost::uint32_t regval = _iface->peek32(FR_RB_CAPS); + return (regval >> 4) & 0x0007; +} + +bool usrp1_impl::has_rx_halfband(void){ + boost::uint32_t regval = _iface->peek32(FR_RB_CAPS); + return (regval >> 3) & 0x0001; +} + +bool usrp1_impl::has_tx_halfband(void){ + boost::uint32_t regval = _iface->peek32(FR_RB_CAPS); + return (regval >> 7) & 0x0001; +} + +/*********************************************************************** + * Mboard Initialization + **********************************************************************/ +void usrp1_impl::mboard_init(void) +{ + _mboard_proxy = wax_obj_proxy::make( + boost::bind(&usrp1_impl::mboard_get, this, _1, _2), + boost::bind(&usrp1_impl::mboard_set, this, _1, _2)); + + // Normal mode with no loopback or Rx counting + _iface->poke32(FR_MODE, 0x00000000); + _iface->poke32(FR_DEBUG_EN, 0x00000000); + _iface->poke32(FR_RX_SAMPLE_RATE_DIV, 0x00000001); + _iface->poke32(FR_TX_SAMPLE_RATE_DIV, 0x00000003); + _iface->poke32(FR_DC_OFFSET_CL_EN, 0x0000000f); + + // Reset offset correction registers + _iface->poke32(FR_ADC_OFFSET_0, 0x00000000); + _iface->poke32(FR_ADC_OFFSET_1, 0x00000000); + _iface->poke32(FR_ADC_OFFSET_2, 0x00000000); + _iface->poke32(FR_ADC_OFFSET_3, 0x00000000); + + // Set default for RX format to 16-bit I&Q and no half-band filter bypass + _iface->poke32(FR_RX_FORMAT, 0x00000300); + + // Set default for TX format to 16-bit I&Q + _iface->poke32(FR_TX_FORMAT, 0x00000000); + + if (usrp1_mboard_verbose){ + std::cout << "USRP1 Capabilities" << std::endl; + std::cout << " number of duc's: " << get_num_ddcs() << std::endl; + std::cout << " number of ddc's: " << get_num_ducs() << std::endl; + std::cout << " rx halfband: " << has_rx_halfband() << std::endl; + std::cout << " tx halfband: " << has_tx_halfband() << std::endl; + } +} + +/*********************************************************************** + * Mboard Get + **********************************************************************/ +static prop_names_t dboard_names = boost::assign::list_of("A")("B"); + +void usrp1_impl::mboard_get(const wax::obj &key_, wax::obj &val) +{ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<mboard_prop_t>()){ + case MBOARD_PROP_NAME: + val = std::string("usrp1 mboard - " + _iface->mb_eeprom["serial"]); + return; + + case MBOARD_PROP_OTHERS: + val = prop_names_t(); + return; + + case MBOARD_PROP_RX_DBOARD: + uhd::assert_has(dboard_names, key.name, "dboard name"); + if (key.name == "A") val = _rx_dboard_proxies[DBOARD_SLOT_A]->get_link(); + if (key.name == "B") val = _rx_dboard_proxies[DBOARD_SLOT_B]->get_link(); + return; + + case MBOARD_PROP_RX_DBOARD_NAMES: + val = dboard_names; + return; + + case MBOARD_PROP_TX_DBOARD: + uhd::assert_has(dboard_names, key.name, "dboard name"); + if (key.name == "A") val = _tx_dboard_proxies[DBOARD_SLOT_A]->get_link(); + if (key.name == "B") val = _tx_dboard_proxies[DBOARD_SLOT_B]->get_link(); + return; + + case MBOARD_PROP_TX_DBOARD_NAMES: + val = dboard_names; + return; + + case MBOARD_PROP_RX_DSP: + val = _rx_dsp_proxies.get(key.name)->get_link(); + return; + + case MBOARD_PROP_RX_DSP_NAMES: + val = _rx_dsp_proxies.keys(); + return; + + case MBOARD_PROP_TX_DSP: + val = _tx_dsp_proxies.get(key.name)->get_link(); + return; + + case MBOARD_PROP_TX_DSP_NAMES: + val = _tx_dsp_proxies.keys(); + return; + + case MBOARD_PROP_CLOCK_CONFIG: + val = _clock_config; + return; + + case MBOARD_PROP_RX_SUBDEV_SPEC: + val = _rx_subdev_spec; + return; + + case MBOARD_PROP_TX_SUBDEV_SPEC: + val = _tx_subdev_spec; + return; + + case MBOARD_PROP_EEPROM_MAP: + val = _iface->mb_eeprom; + return; + + case MBOARD_PROP_TIME_NOW: + val = _soft_time_ctrl->get_time(); + return; + + case MBOARD_PROP_CLOCK_RATE: + val = _clock_ctrl->get_master_clock_freq(); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * Mboard Set + **********************************************************************/ +void usrp1_impl::mboard_set(const wax::obj &key, const wax::obj &val) +{ + if(key.type() == typeid(std::string)) { + if(key.as<std::string>() == "load_eeprom") { + std::string usrp1_eeprom_image = val.as<std::string>(); + std::cout << "USRP1 EEPROM image: " << usrp1_eeprom_image << std::endl; + _ctrl_transport->usrp_load_eeprom(val.as<std::string>()); + } + return; + } + + //handle the get request conditioned on the key + switch(key.as<mboard_prop_t>()){ + + case MBOARD_PROP_RX_SUBDEV_SPEC: + _rx_subdev_spec = val.as<subdev_spec_t>(); + if (_rx_subdev_spec.size() > this->get_num_ddcs()){ + throw uhd::value_error(str(boost::format( + "USRP1 suports up to %u RX channels.\n" + "However, this RX subdev spec requires %u channels\n" + ) % this->get_num_ddcs() % _rx_subdev_spec.size())); + } + verify_rx_subdev_spec(_rx_subdev_spec, _mboard_proxy->get_link()); + //set the mux and set the number of rx channels + _iface->poke32(FR_RX_MUX, calc_rx_mux(_rx_subdev_spec, _mboard_proxy->get_link())); + return; + + case MBOARD_PROP_TX_SUBDEV_SPEC: + _tx_subdev_spec = val.as<subdev_spec_t>(); + if (_tx_subdev_spec.size() > this->get_num_ducs()){ + throw uhd::value_error(str(boost::format( + "USRP1 suports up to %u TX channels.\n" + "However, this TX subdev spec requires %u channels\n" + ) % this->get_num_ducs() % _tx_subdev_spec.size())); + } + verify_tx_subdev_spec(_tx_subdev_spec, _mboard_proxy->get_link()); + //set the mux and set the number of tx channels + _iface->poke32(FR_TX_MUX, calc_tx_mux(_tx_subdev_spec, _mboard_proxy->get_link())); + return; + + case MBOARD_PROP_EEPROM_MAP: + // Step1: commit the map, writing only those values set. + // Step2: readback the entire eeprom map into the iface. + val.as<mboard_eeprom_t>().commit(*_iface, mboard_eeprom_t::MAP_B000); + _iface->mb_eeprom = mboard_eeprom_t(*_iface, mboard_eeprom_t::MAP_B000); + return; + + case MBOARD_PROP_TIME_NOW: + _soft_time_ctrl->set_time(val.as<time_spec_t>()); + return; + + case MBOARD_PROP_CLOCK_RATE: + _clock_ctrl->set_master_clock_freq(val.as<double>()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/usrp1/soft_time_ctrl.cpp b/host/lib/usrp/usrp1/soft_time_ctrl.cpp new file mode 100644 index 000000000..e1b671811 --- /dev/null +++ b/host/lib/usrp/usrp1/soft_time_ctrl.cpp @@ -0,0 +1,204 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "soft_time_ctrl.hpp" +#include <uhd/transport/bounded_buffer.hpp> +#include <boost/any.hpp> +#include <boost/thread/thread.hpp> +#include <boost/thread/condition_variable.hpp> +#include <boost/date_time/posix_time/posix_time.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; +namespace pt = boost::posix_time; + +static const time_spec_t TWIDDLE(0.0011); + +/*********************************************************************** + * Soft time control implementation + **********************************************************************/ +class soft_time_ctrl_impl : public soft_time_ctrl{ +public: + + soft_time_ctrl_impl(const cb_fcn_type &stream_on_off): + _nsamps_remaining(0), + _stream_mode(stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS), + _cmd_queue(2), + _stream_on_off(stream_on_off) + { + //synchronously spawn a new thread + _update_mutex.lock(); //lock mutex before spawned + _thread_group.create_thread(boost::bind(&soft_time_ctrl_impl::recv_cmd_dispatcher, this)); + _update_mutex.lock(); //lock blocks until spawned + _update_mutex.unlock(); //unlock mutex before done + + //initialize the time to something + this->set_time(time_spec_t(0.0)); + } + + ~soft_time_ctrl_impl(void){ + _thread_group.interrupt_all(); + _thread_group.join_all(); + } + + /******************************************************************* + * Time control + ******************************************************************/ + void set_time(const time_spec_t &time){ + boost::mutex::scoped_lock lock(_update_mutex); + _time_offset = time_spec_t::get_system_time() - time; + } + + time_spec_t get_time(void){ + boost::mutex::scoped_lock lock(_update_mutex); + return time_now(); + } + + UHD_INLINE time_spec_t time_now(void){ + //internal get time without scoped lock + return time_spec_t::get_system_time() - _time_offset; + } + + UHD_INLINE void sleep_until_time( + boost::mutex::scoped_lock &lock, const time_spec_t &time + ){ + boost::condition_variable cond; + //use a condition variable to unlock, sleep, lock + double seconds_to_sleep = (time - time_now()).get_real_secs(); + cond.timed_wait(lock, pt::microseconds(long(seconds_to_sleep*1e6))); + } + + /******************************************************************* + * Receive control + ******************************************************************/ + void recv_post(rx_metadata_t &md, size_t &nsamps){ + boost::mutex::scoped_lock lock(_update_mutex); + + //load the metadata with the expected time + md.has_time_spec = true; + md.time_spec = time_now(); + + //none of the stuff below matters in continuous streaming mode + if (_stream_mode == stream_cmd_t::STREAM_MODE_START_CONTINUOUS) return; + + //When to stop streaming: + //The samples have been received and the stream mode is non-continuous. + //Rewrite the sample count to clip to the requested number of samples. + if (_nsamps_remaining <= nsamps){ + nsamps = _nsamps_remaining; //set nsamps, then stop + md.end_of_burst = true; + stream_on_off(false); + return; + } + + //update the consumed samples + _nsamps_remaining -= nsamps; + } + + void issue_stream_cmd(const stream_cmd_t &cmd){ + _cmd_queue.push_with_wait(cmd); + } + + void stream_on_off(bool enb){ + _stream_on_off(enb); + _nsamps_remaining = 0; + } + + /******************************************************************* + * Transmit control + ******************************************************************/ + bool send_pre(const tx_metadata_t &md, double &timeout){ + if (not md.has_time_spec) return false; + + boost::mutex::scoped_lock lock(_update_mutex); + + time_spec_t time_at(md.time_spec - TWIDDLE); + + //handle late packets + if (time_at < time_now()){ + //TODO post async message + return true; + } + + timeout -= (time_at - time_now()).get_real_secs(); + sleep_until_time(lock, time_at); + return false; + } + + /******************************************************************* + * Thread control + ******************************************************************/ + void recv_cmd_handle_cmd(const stream_cmd_t &cmd){ + boost::mutex::scoped_lock lock(_update_mutex); + + //handle the stream at time by sleeping + if (not cmd.stream_now){ + time_spec_t time_at(cmd.time_spec - TWIDDLE); + if (time_at < time_now()){ + //TODO inject late cmd inline error + } + else{ + sleep_until_time(lock, time_at); + } + } + + //When to stop streaming: + //Stop streaming when the command is a stop and streaming. + if (cmd.stream_mode == stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS + and _stream_mode != stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS + ) stream_on_off(false); + + //When to start streaming: + //Start streaming when the command is not a stop and not streaming. + if (cmd.stream_mode != stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS + and _stream_mode == stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS + ) stream_on_off(true); + + //update the state + _nsamps_remaining += cmd.num_samps; + _stream_mode = cmd.stream_mode; + } + + void recv_cmd_dispatcher(void){ + _update_mutex.unlock(); + try{ + boost::any cmd; + while (true){ + _cmd_queue.pop_with_wait(cmd); + recv_cmd_handle_cmd(boost::any_cast<stream_cmd_t>(cmd)); + } + } catch(const boost::thread_interrupted &){} + } + +private: + boost::mutex _update_mutex; + size_t _nsamps_remaining; + stream_cmd_t::stream_mode_t _stream_mode; + time_spec_t _time_offset; + bounded_buffer<boost::any> _cmd_queue; + const cb_fcn_type _stream_on_off; + boost::thread_group _thread_group; +}; + +/*********************************************************************** + * Soft time control factor + **********************************************************************/ +soft_time_ctrl::sptr soft_time_ctrl::make(const cb_fcn_type &stream_on_off){ + return sptr(new soft_time_ctrl_impl(stream_on_off)); +} diff --git a/host/lib/usrp/usrp1/soft_time_ctrl.hpp b/host/lib/usrp/usrp1/soft_time_ctrl.hpp new file mode 100644 index 000000000..7fdac7fc8 --- /dev/null +++ b/host/lib/usrp/usrp1/soft_time_ctrl.hpp @@ -0,0 +1,69 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_LIBUHD_USRP_USRP1_SOFT_TIME_CTRL_HPP +#define INCLUDED_LIBUHD_USRP_USRP1_SOFT_TIME_CTRL_HPP + +#include <uhd/types/stream_cmd.hpp> +#include <uhd/types/time_spec.hpp> +#include <uhd/types/metadata.hpp> +#include <boost/utility.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/function.hpp> + +namespace uhd{ namespace usrp{ + +/*! + * The soft time control emulates some of the + * advanced streaming capabilities of the later USRP models. + * Soft time control uses the system time to emulate + * timed transmits, timed receive commands, device time, + * and inline and async error messages. + */ +class soft_time_ctrl : boost::noncopyable{ +public: + typedef boost::shared_ptr<soft_time_ctrl> sptr; + typedef boost::function<void(bool)> cb_fcn_type; + + /*! + * Make a new soft time control. + * \param stream_on_off a function to enable/disable rx + * \return a new soft time control object + */ + static sptr make(const cb_fcn_type &stream_on_off); + //TODO pass in the error queue for async msgs + //TODO pass in the queue for inline msgs + + //! Set the current time + virtual void set_time(const time_spec_t &time) = 0; + + //! Get the current time + virtual time_spec_t get_time(void) = 0; + + //! Call after the internal recv function + virtual void recv_post(rx_metadata_t &md, size_t &nsamps) = 0; + + //! Call before the internal send function + virtual bool send_pre(const tx_metadata_t &md, double &timeout) = 0; + + //! Issue a stream command to receive + virtual void issue_stream_cmd(const stream_cmd_t &cmd) = 0; +}; + +}} //namespace + +#endif /* INCLUDED_LIBUHD_USRP_USRP1_SOFT_TIME_CTRL_HPP */ diff --git a/host/lib/usrp/usrp1/usrp1_ctrl.cpp b/host/lib/usrp/usrp1/usrp1_ctrl.cpp new file mode 100644 index 000000000..3fa6cb8b7 --- /dev/null +++ b/host/lib/usrp/usrp1/usrp1_ctrl.cpp @@ -0,0 +1,416 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp1_ctrl.hpp" +#include "usrp_commands.h" +#include <uhd/exception.hpp> +#include <uhd/transport/usb_control.hpp> +#include <boost/functional/hash.hpp> +#include <boost/thread/thread.hpp> +#include <iostream> +#include <fstream> +#include <sstream> +#include <string> +#include <vector> +#include <cstring> + +using namespace uhd; + +#define FX2_FIRMWARE_LOAD 0xa0 + +static const bool load_img_msg = true; + +/*********************************************************************** + * Helper Functions + **********************************************************************/ +/*! + * Create a file hash + * The hash will be used to identify the loaded firmware and fpga image + * \param filename file used to generate hash value + * \return hash value in a size_t type + */ +static size_t generate_hash(const char *filename) +{ + std::ifstream file(filename); + if (not file){ + throw uhd::io_error(std::string("cannot open input file ") + filename); + } + + size_t hash = 0; + + char ch; + while (file.get(ch)) { + boost::hash_combine(hash, ch); + } + + if (not file.eof()){ + throw uhd::io_error(std::string("file error ") + filename); + } + + file.close(); + return hash; +} + + +/*! + * Verify checksum of a Intel HEX record + * \param record a line from an Intel HEX file + * \return true if record is valid, false otherwise + */ +static bool checksum(std::string *record) +{ + + size_t len = record->length(); + unsigned int i; + unsigned char sum = 0; + unsigned int val; + + for (i = 1; i < len; i += 2) { + std::istringstream(record->substr(i, 2)) >> std::hex >> val; + sum += val; + } + + if (sum == 0) + return true; + else + return false; +} + + +/*! + * Parse Intel HEX record + * + * \param record a line from an Intel HEX file + * \param len output length of record + * \param addr output address + * \param type output type + * \param data output data + * \return true if record is sucessfully read, false on error + */ +bool parse_record(std::string *record, unsigned int &len, + unsigned int &addr, unsigned int &type, + unsigned char* data) +{ + unsigned int i; + std::string _data; + unsigned int val; + + if (record->substr(0, 1) != ":") + return false; + + std::istringstream(record->substr(1, 2)) >> std::hex >> len; + std::istringstream(record->substr(3, 4)) >> std::hex >> addr; + std::istringstream(record->substr(7, 2)) >> std::hex >> type; + + for (i = 0; i < len; i++) { + std::istringstream(record->substr(9 + 2 * i, 2)) >> std::hex >> val; + data[i] = (unsigned char) val; + } + + return true; +} + + +/*! + * USRP control implementation for device discovery and configuration + */ +class usrp_ctrl_impl : public usrp_ctrl { +public: + usrp_ctrl_impl(uhd::transport::usb_control::sptr ctrl_transport) + { + _ctrl_transport = ctrl_transport; + } + + void usrp_load_firmware(std::string filestring, bool force) + { + const char *filename = filestring.c_str(); + + size_t hash = generate_hash(filename); + + size_t loaded_hash; usrp_get_firmware_hash(loaded_hash); + + if (not force and (hash == loaded_hash)) return; + + //FIXME: verify types + unsigned int len; + unsigned int addr; + unsigned int type; + unsigned char data[512]; + + std::ifstream file; + file.open(filename, std::ifstream::in); + + if (!file.good()) { + throw uhd::io_error("usrp_load_firmware: cannot open firmware input file"); + } + + unsigned char reset_y = 1; + unsigned char reset_n = 0; + + //hit the reset line + if (load_img_msg) std::cout << "Loading firmware image: " << filestring << "..." << std::flush; + usrp_control_write(FX2_FIRMWARE_LOAD, 0xe600, 0, &reset_y, 1); + + while (!file.eof()) { + std::string record; + file >> record; + + //check for valid record + if (not checksum(&record) or not parse_record(&record, len, addr, type, data)) { + throw uhd::io_error("usrp_load_firmware: bad record checksum"); + } + + //type 0x00 is data + if (type == 0x00) { + int ret = usrp_control_write(FX2_FIRMWARE_LOAD, addr, 0, data, len); + if (ret < 0) throw uhd::io_error("usrp_load_firmware: usrp_control_write failed"); + } + //type 0x01 is end + else if (type == 0x01) { + usrp_set_firmware_hash(hash); //set hash before reset + usrp_control_write(FX2_FIRMWARE_LOAD, 0xe600, 0, &reset_n, 1); + file.close(); + + //wait for things to settle + boost::this_thread::sleep(boost::posix_time::milliseconds(1000)); + if (load_img_msg) std::cout << " done" << std::endl; + return; + } + //type anything else is unhandled + else { + throw uhd::io_error("usrp_load_firmware: unsupported record"); + } + } + + //file did not end + throw uhd::io_error("usrp_load_firmware: bad record"); + } + + void usrp_init(void){ + /* not calling because this causes junk to come at init + * and it does not seem to be necessary to call anyway + usrp_rx_enable(false); + usrp_rx_reset(true); + usrp_rx_reset(false); + usrp_rx_enable(true); + */ + + usrp_tx_enable(false); + usrp_tx_reset(true); + usrp_tx_reset(false); + usrp_tx_enable(true); + } + + void usrp_load_fpga(std::string filestring) + { + const char *filename = filestring.c_str(); + + size_t hash = generate_hash(filename); + + size_t loaded_hash; usrp_get_fpga_hash(loaded_hash); + + if (hash == loaded_hash) return; + const int ep0_size = 64; + unsigned char buf[ep0_size]; + + if (load_img_msg) std::cout << "Loading FPGA image: " << filestring << "..." << std::flush; + std::ifstream file; + file.open(filename, std::ios::in | std::ios::binary); + if (not file.good()) { + throw uhd::io_error("usrp_load_fpga: cannot open fpga input file"); + } + + if (usrp_control_write_cmd(VRQ_FPGA_LOAD, 0, FL_BEGIN) < 0) { + throw uhd::io_error("usrp_load_fpga: fpga load error"); + } + + while (not file.eof()) { + file.read((char *)buf, sizeof(buf)); + size_t n = file.gcount(); + int ret = usrp_control_write(VRQ_FPGA_LOAD, 0, FL_XFER, buf, n); + if (ret < 0 or size_t(ret) != n) { + throw uhd::io_error("usrp_load_fpga: fpga load error"); + } + } + + if (usrp_control_write_cmd(VRQ_FPGA_LOAD, 0, FL_END) < 0) { + throw uhd::io_error("usrp_load_fpga: fpga load error"); + } + + usrp_set_fpga_hash(hash); + file.close(); + if (load_img_msg) std::cout << " done" << std::endl; + } + + void usrp_load_eeprom(std::string filestring) + { + const char *filename = filestring.c_str(); + const boost::uint16_t i2c_addr = 0x50; + + //FIXME: verify types + int len; + unsigned int addr; + unsigned char data[256]; + unsigned char sendbuf[17]; + + std::ifstream file; + file.open(filename, std::ifstream::in); + + if (not file.good()) { + throw uhd::io_error("usrp_load_eeprom: cannot open EEPROM input file"); + } + + file.read((char *)data, 256); + len = file.gcount(); + + if(len == 256) { + throw uhd::io_error("usrp_load_eeprom: image size too large"); + } + + const int pagesize = 16; + addr = 0; + while(len > 0) { + sendbuf[0] = addr; + memcpy(sendbuf+1, &data[addr], len > pagesize ? pagesize : len); + int ret = usrp_i2c_write(i2c_addr, sendbuf, (len > pagesize ? pagesize : len)+1); + if (ret < 0) { + throw uhd::io_error("usrp_load_eeprom: usrp_i2c_write failed"); + } + addr += pagesize; + len -= pagesize; + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + } + file.close(); + } + + + void usrp_set_led(int led_num, bool on) + { + UHD_ASSERT_THROW(usrp_control_write_cmd(VRQ_SET_LED, on, led_num) >= 0); + } + + + void usrp_get_firmware_hash(size_t &hash) + { + UHD_ASSERT_THROW(usrp_control_read(0xa0, USRP_HASH_SLOT_0_ADDR, 0, + (unsigned char*) &hash, sizeof(size_t)) >= 0); + } + + + void usrp_set_firmware_hash(size_t hash) + { + UHD_ASSERT_THROW(usrp_control_write(0xa0, USRP_HASH_SLOT_0_ADDR, 0, + (unsigned char*) &hash, sizeof(size_t)) >= 0); + + } + + + void usrp_get_fpga_hash(size_t &hash) + { + UHD_ASSERT_THROW(usrp_control_read(0xa0, USRP_HASH_SLOT_1_ADDR, 0, + (unsigned char*) &hash, sizeof(size_t)) >= 0); + } + + + void usrp_set_fpga_hash(size_t hash) + { + UHD_ASSERT_THROW(usrp_control_write(0xa0, USRP_HASH_SLOT_1_ADDR, 0, + (unsigned char*) &hash, sizeof(size_t)) >= 0); + } + + void usrp_tx_enable(bool on) + { + UHD_ASSERT_THROW(usrp_control_write_cmd(VRQ_FPGA_SET_TX_ENABLE, on, 0) >= 0); + } + + + void usrp_rx_enable(bool on) + { + UHD_ASSERT_THROW(usrp_control_write_cmd(VRQ_FPGA_SET_RX_ENABLE, on, 0) >= 0); + } + + + void usrp_tx_reset(bool on) + { + UHD_ASSERT_THROW(usrp_control_write_cmd(VRQ_FPGA_SET_TX_RESET, on, 0) >= 0); + } + + + void usrp_rx_reset(bool on) + { + UHD_ASSERT_THROW(usrp_control_write_cmd(VRQ_FPGA_SET_RX_RESET, on, 0) >= 0); + } + + + int usrp_control_write(boost::uint8_t request, + boost::uint16_t value, + boost::uint16_t index, + unsigned char *buff, + boost::uint16_t length) + { + return _ctrl_transport->submit(VRT_VENDOR_OUT, // bmReqeustType + request, // bRequest + value, // wValue + index, // wIndex + buff, // data + length); // wLength + } + + + int usrp_control_read(boost::uint8_t request, + boost::uint16_t value, + boost::uint16_t index, + unsigned char *buff, + boost::uint16_t length) + { + return _ctrl_transport->submit(VRT_VENDOR_IN, // bmReqeustType + request, // bRequest + value, // wValue + index, // wIndex + buff, // data + length); // wLength + } + + + int usrp_control_write_cmd(boost::uint8_t request, boost::uint16_t value, boost::uint16_t index) + { + return usrp_control_write(request, value, index, 0, 0); + } + + int usrp_i2c_write(boost::uint16_t i2c_addr, unsigned char *buf, boost::uint16_t len) + { + return usrp_control_write(VRQ_I2C_WRITE, i2c_addr, 0, buf, len); + } + + int usrp_i2c_read(boost::uint16_t i2c_addr, unsigned char *buf, boost::uint16_t len) + { + return usrp_control_read(VRQ_I2C_READ, i2c_addr, 0, buf, len); + } + + + +private: + uhd::transport::usb_control::sptr _ctrl_transport; +}; + +/*********************************************************************** + * Public make function for usrp_ctrl interface + **********************************************************************/ +usrp_ctrl::sptr usrp_ctrl::make(uhd::transport::usb_control::sptr ctrl_transport){ + return sptr(new usrp_ctrl_impl(ctrl_transport)); +} + diff --git a/host/lib/usrp/usrp1/usrp1_ctrl.hpp b/host/lib/usrp/usrp1/usrp1_ctrl.hpp new file mode 100644 index 000000000..ee68f8401 --- /dev/null +++ b/host/lib/usrp/usrp1/usrp1_ctrl.hpp @@ -0,0 +1,113 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP_CTRL_HPP +#define INCLUDED_USRP_CTRL_HPP + +#include <uhd/transport/usb_control.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> + +class usrp_ctrl : boost::noncopyable{ +public: + typedef boost::shared_ptr<usrp_ctrl> sptr; + + /*! + * Make a usrp control object from a control transport + * \param ctrl_transport a USB control transport + * \return a new usrp control object + */ + static sptr make(uhd::transport::usb_control::sptr ctrl_transport); + + //! Call init after the fpga is loaded + virtual void usrp_init(void) = 0; + + /*! + * Load firmware in Intel HEX Format onto device + * \param filename name of firmware file + * \param force reload firmware if already loaded + */ + virtual void usrp_load_firmware(std::string filename, + bool force = false) = 0; + + /*! + * Load fpga file onto usrp + * \param filename name of fpga image + */ + virtual void usrp_load_fpga(std::string filename) = 0; + + /*! + * Load USB descriptor file in Intel HEX format into EEPROM + * \param filename name of EEPROM image + */ + virtual void usrp_load_eeprom(std::string filestring) = 0; + + /*! + * Submit an IN transfer + * \param request device specific request + * \param value device specific field + * \param index device specific field + * \param buff buffer to place data + * \return number of bytes read or error + */ + virtual int usrp_control_read(boost::uint8_t request, + boost::uint16_t value, + boost::uint16_t index, + unsigned char *buff, + boost::uint16_t length) = 0; + + /*! + * Submit an OUT transfer + * \param request device specific request + * \param value device specific field + * \param index device specific field + * \param buff buffer of data to be sent + * \return number of bytes written or error + */ + virtual int usrp_control_write(boost::uint8_t request, + boost::uint16_t value, + boost::uint16_t index, + unsigned char *buff, + boost::uint16_t length) = 0; + + /*! + * Perform an I2C write + * \param i2c_addr I2C device address + * \param buf data to be written + * \param len length of data in bytes + * \return number of bytes written or error + */ + + virtual int usrp_i2c_write(boost::uint16_t i2c_addr, + unsigned char *buf, + boost::uint16_t len) = 0; + + /*! + * Perform an I2C read + * \param i2c_addr I2C device address + * \param buf data to be read + * \param len length of data in bytes + * \return number of bytes read or error + */ + + virtual int usrp_i2c_read(boost::uint16_t i2c_addr, + unsigned char *buf, + boost::uint16_t len) = 0; + +}; + +#endif /* INCLUDED_USRP_CTRL_HPP */ diff --git a/host/lib/usrp/usrp1/usrp1_iface.cpp b/host/lib/usrp/usrp1/usrp1_iface.cpp new file mode 100644 index 000000000..0c37610ce --- /dev/null +++ b/host/lib/usrp/usrp1/usrp1_iface.cpp @@ -0,0 +1,259 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp1_iface.hpp" +#include "usrp_commands.h" +#include <uhd/exception.hpp> +#include <uhd/utils/byteswap.hpp> +#include <boost/format.hpp> +#include <stdexcept> +#include <iostream> +#include <iomanip> + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; + +static const bool iface_debug = false; + +class usrp1_iface_impl : public usrp1_iface{ +public: + /******************************************************************* + * Structors + ******************************************************************/ + usrp1_iface_impl(usrp_ctrl::sptr ctrl_transport) + { + _ctrl_transport = ctrl_transport; + mb_eeprom = mboard_eeprom_t(*this, mboard_eeprom_t::MAP_B000); + } + + ~usrp1_iface_impl(void) + { + /* NOP */ + } + + /******************************************************************* + * Peek and Poke + ******************************************************************/ + void poke32(boost::uint32_t addr, boost::uint32_t value) + { + boost::uint32_t swapped = uhd::htonx(value); + + if (iface_debug) { + std::cout.fill('0'); + std::cout << "poke32("; + std::cout << std::dec << std::setw(2) << addr << ", 0x"; + std::cout << std::hex << std::setw(8) << value << ")" << std::endl; + } + + boost::uint8_t w_index_h = SPI_ENABLE_FPGA & 0xff; + boost::uint8_t w_index_l = (SPI_FMT_MSB | SPI_FMT_HDR_1) & 0xff; + + int ret =_ctrl_transport->usrp_control_write( + VRQ_SPI_WRITE, + addr & 0x7f, + (w_index_h << 8) | (w_index_l << 0), + (unsigned char*) &swapped, + sizeof(boost::uint32_t)); + + if (ret < 0) throw uhd::io_error("USRP1: failed control write"); + } + + boost::uint32_t peek32(boost::uint32_t addr) + { + boost::uint32_t value_out; + + boost::uint8_t w_index_h = SPI_ENABLE_FPGA & 0xff; + boost::uint8_t w_index_l = (SPI_FMT_MSB | SPI_FMT_HDR_1) & 0xff; + + int ret = _ctrl_transport->usrp_control_read( + VRQ_SPI_READ, + 0x80 | (addr & 0x7f), + (w_index_h << 8) | (w_index_l << 0), + (unsigned char*) &value_out, + sizeof(boost::uint32_t)); + + if (ret < 0) throw uhd::io_error("USRP1: failed control read"); + + return uhd::ntohx(value_out); + } + + void poke16(boost::uint32_t, boost::uint16_t) { + throw uhd::not_implemented_error("Unhandled command poke16()"); + } + + boost::uint16_t peek16(boost::uint32_t) { + throw uhd::not_implemented_error("Unhandled command peek16()"); + return 0; + } + + void write_uart(boost::uint8_t, const std::string &) { + throw uhd::not_implemented_error("Unhandled command write_uart()"); + } + + std::string read_uart(boost::uint8_t) { + throw uhd::not_implemented_error("Unhandled command read_uart()"); + } + + /******************************************************************* + * I2C + ******************************************************************/ + static const size_t max_i2c_data_bytes = 64; + + //TODO: make this handle EEPROM page sizes. right now you can't write over a 16-byte boundary. + //to accomplish this you'll have to have addr offset as a separate parameter. + + void write_i2c(boost::uint8_t addr, const byte_vector_t &bytes) + { + UHD_ASSERT_THROW(bytes.size() < max_i2c_data_bytes); + + unsigned char buff[max_i2c_data_bytes]; + std::copy(bytes.begin(), bytes.end(), buff); + + int ret = _ctrl_transport->usrp_i2c_write(addr & 0xff, + buff, + bytes.size()); + + // TODO throw and catch i2c failures during eeprom read + if (iface_debug && (ret < 0)) + std::cerr << "USRP: failed i2c write: " << ret << std::endl; + } + + byte_vector_t read_i2c(boost::uint8_t addr, size_t num_bytes) + { + UHD_ASSERT_THROW(num_bytes < max_i2c_data_bytes); + + unsigned char buff[max_i2c_data_bytes]; + int ret = _ctrl_transport->usrp_i2c_read(addr & 0xff, + buff, + num_bytes); + + // TODO throw and catch i2c failures during eeprom read + if (iface_debug && ((ret < 0) || (unsigned)ret < (num_bytes))) { + std::cerr << "USRP: failed i2c read: " << ret << std::endl; + return byte_vector_t(num_bytes, 0xff); + } + + byte_vector_t out_bytes; + for (size_t i = 0; i < num_bytes; i++) + out_bytes.push_back(buff[i]); + + return out_bytes; + } + + /******************************************************************* + * SPI + * + * For non-readback transactions use the SPI_WRITE command, which is + * simpler and uses the USB control buffer for OUT data. No data + * needs to be returned. + * + * For readback transactions use SPI_TRANSACT, which places up to + * 4 bytes of OUT data in the device request fields and uses the + * control buffer for IN data. + ******************************************************************/ + boost::uint32_t transact_spi(int which_slave, + const spi_config_t &, + boost::uint32_t bits, + size_t num_bits, + bool readback) + { + UHD_ASSERT_THROW((num_bits <= 32) && !(num_bits % 8)); + size_t num_bytes = num_bits / 8; + + // Byteswap on num_bytes + unsigned char buff[4] = { 0 }; + for (size_t i = 1; i <= num_bytes; i++) + buff[num_bytes - i] = (bits >> ((i - 1) * 8)) & 0xff; + + if (readback) { + boost::uint8_t w_len_h = which_slave & 0xff; + boost::uint8_t w_len_l = num_bytes & 0xff; + + int ret = _ctrl_transport->usrp_control_read( + VRQ_SPI_TRANSACT, + (buff[0] << 8) | (buff[1] << 0), + (buff[2] << 8) | (buff[3] << 0), + buff, + (w_len_h << 8) | (w_len_l << 0)); + + if (ret < 0) throw uhd::io_error("USRP1: failed SPI readback transaction"); + + boost::uint32_t val = (((boost::uint32_t)buff[0]) << 0) | + (((boost::uint32_t)buff[1]) << 8) | + (((boost::uint32_t)buff[2]) << 16) | + (((boost::uint32_t)buff[3]) << 24); + return val; + } + else { + boost::uint8_t w_index_h = which_slave & 0xff; + boost::uint8_t w_index_l = (SPI_FMT_MSB | SPI_FMT_HDR_0) & 0xff; + + int ret =_ctrl_transport->usrp_control_write( + VRQ_SPI_WRITE, + 0x00, + (w_index_h << 8) | (w_index_l << 0), + buff, num_bytes); + + if (ret < 0) throw uhd::io_error("USRP1: failed SPI transaction"); + + return 0; + } + } + + /******************************************************************* + * Firmware + * + * This call is deprecated. + ******************************************************************/ + void write_firmware_cmd(boost::uint8_t request, + boost::uint16_t value, + boost::uint16_t index, + unsigned char *buff, + boost::uint16_t length) + { + int ret; + + if (request & 0x80) { + ret = _ctrl_transport->usrp_control_read(request, + value, + index, + buff, + length); + } + else { + ret = _ctrl_transport->usrp_control_write(request, + value, + index, + buff, + length); + } + + if (ret < 0) throw uhd::io_error("USRP1: failed firmware command"); + } + +private: + usrp_ctrl::sptr _ctrl_transport; +}; + +/*********************************************************************** + * Public Make Function + **********************************************************************/ +usrp1_iface::sptr usrp1_iface::make(usrp_ctrl::sptr ctrl_transport) +{ + return sptr(new usrp1_iface_impl(ctrl_transport)); +} diff --git a/host/lib/usrp/usrp1/usrp1_iface.hpp b/host/lib/usrp/usrp1/usrp1_iface.hpp new file mode 100644 index 000000000..fdb7464ce --- /dev/null +++ b/host/lib/usrp/usrp1/usrp1_iface.hpp @@ -0,0 +1,60 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP1_IFACE_HPP +#define INCLUDED_USRP1_IFACE_HPP + +#include <uhd/usrp/mboard_iface.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include "usrp1_ctrl.hpp" + +/*! + * The usrp1 interface class: + * Provides a set of functions to implementation layer. + * Including spi, peek, poke, control... + */ +class usrp1_iface : public uhd::usrp::mboard_iface, boost::noncopyable{ +public: + typedef boost::shared_ptr<usrp1_iface> sptr; + + //motherboard eeprom map structure + uhd::usrp::mboard_eeprom_t mb_eeprom; + + /*! + * Make a new usrp1 interface with the control transport. + * \param ctrl_transport the usrp controller object + * \return a new usrp1 interface object + */ + static sptr make(usrp_ctrl::sptr ctrl_transport); + + /*! + * Perform a general USB firmware OUT operation + * \param request + * \param value + * \param index + * \param data + * \return + */ + virtual void write_firmware_cmd(boost::uint8_t request, + boost::uint16_t value, + boost::uint16_t index, + unsigned char* buff, + boost::uint16_t length) = 0; +}; + +#endif /* INCLUDED_USRP1_IFACE_HPP */ diff --git a/host/lib/usrp/usrp1/usrp1_impl.cpp b/host/lib/usrp/usrp1/usrp1_impl.cpp new file mode 100644 index 000000000..7005c59f2 --- /dev/null +++ b/host/lib/usrp/usrp1/usrp1_impl.cpp @@ -0,0 +1,253 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp1_impl.hpp" +#include "usrp1_ctrl.hpp" +#include "fpga_regs_standard.h" +#include "usrp_spi_defs.h" +#include <uhd/utils/safe_call.hpp> +#include <uhd/transport/usb_control.hpp> +#include <uhd/usrp/device_props.hpp> +#include <uhd/usrp/mboard_props.hpp> +#include <uhd/utils/warning.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/utils/images.hpp> +#include <boost/format.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/filesystem.hpp> +#include <boost/thread/thread.hpp> +#include <boost/lexical_cast.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; + +const boost::uint16_t USRP1_VENDOR_ID = 0xfffe; +const boost::uint16_t USRP1_PRODUCT_ID = 0x0002; +const boost::uint16_t FX2_VENDOR_ID = 0x04b4; +const boost::uint16_t FX2_PRODUCT_ID = 0x8613; + +const std::vector<usrp1_impl::dboard_slot_t> usrp1_impl::_dboard_slots = boost::assign::list_of + (usrp1_impl::DBOARD_SLOT_A)(usrp1_impl::DBOARD_SLOT_B) +; + +/*********************************************************************** + * Discovery + **********************************************************************/ +static device_addrs_t usrp1_find(const device_addr_t &hint) +{ + device_addrs_t usrp1_addrs; + + //return an empty list of addresses when type is set to non-usrp1 + if (hint.has_key("type") and hint["type"] != "usrp1") return usrp1_addrs; + + //Return an empty list of addresses when an address is specified, + //since an address is intended for a different, non-USB, device. + if (hint.has_key("addr")) return usrp1_addrs; + + boost::uint16_t vid = hint.has_key("uninit") ? FX2_VENDOR_ID : USRP1_VENDOR_ID; + boost::uint16_t pid = hint.has_key("uninit") ? FX2_PRODUCT_ID : USRP1_PRODUCT_ID; + + // Important note: + // The get device list calls are nested inside the for loop. + // This allows the usb guts to decontruct when not in use, + // so that re-enumeration after fw load can occur successfully. + // This requirement is a courtesy of libusb1.0 on windows. + + //find the usrps and load firmware + BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) { + //extract the firmware path for the USRP1 + std::string usrp1_fw_image; + try{ + usrp1_fw_image = find_image_path(hint.get("fw", "usrp1_fw.ihx")); + } + catch(...){ + uhd::warning::post( + "Could not locate USRP1 firmware.\n" + "Please install the images package.\n" + ); + return usrp1_addrs; + } + //std::cout << "USRP1 firmware image: " << usrp1_fw_image << std::endl; + + usrp_ctrl::make(usb_control::make(handle))->usrp_load_firmware(usrp1_fw_image); + } + + //get descriptors again with serial number, but using the initialized VID/PID now since we have firmware + vid = USRP1_VENDOR_ID; + pid = USRP1_PRODUCT_ID; + + BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) { + usrp1_iface::sptr iface = usrp1_iface::make(usrp_ctrl::make(usb_control::make(handle))); + device_addr_t new_addr; + new_addr["type"] = "usrp1"; + new_addr["name"] = iface->mb_eeprom["name"]; + new_addr["serial"] = handle->get_serial(); + //this is a found usrp1 when the hint serial and name match or blank + if ( + (not hint.has_key("name") or hint["name"] == new_addr["name"]) and + (not hint.has_key("serial") or hint["serial"] == new_addr["serial"]) + ){ + usrp1_addrs.push_back(new_addr); + } + } + + return usrp1_addrs; +} + +/*********************************************************************** + * Make + **********************************************************************/ +static device::sptr usrp1_make(const device_addr_t &device_addr){ + + //extract the FPGA path for the USRP1 + std::string usrp1_fpga_image = find_image_path( + device_addr.get("fpga", "usrp1_fpga.rbf") + ); + //std::cout << "USRP1 FPGA image: " << usrp1_fpga_image << std::endl; + + //try to match the given device address with something on the USB bus + std::vector<usb_device_handle::sptr> device_list = + usb_device_handle::get_device_list(USRP1_VENDOR_ID, USRP1_PRODUCT_ID); + + //locate the matching handle in the device list + usb_device_handle::sptr handle; + BOOST_FOREACH(usb_device_handle::sptr dev_handle, device_list) { + if (dev_handle->get_serial() == device_addr["serial"]){ + handle = dev_handle; + break; + } + } + UHD_ASSERT_THROW(handle.get() != NULL); //better be found + + //create control objects and a data transport + usb_control::sptr ctrl_transport = usb_control::make(handle); + usrp_ctrl::sptr usrp_ctrl = usrp_ctrl::make(ctrl_transport); + usrp_ctrl->usrp_load_fpga(usrp1_fpga_image); + usrp_ctrl->usrp_init(); + usb_zero_copy::sptr data_transport = usb_zero_copy::make( + handle, // identifier + 6, // IN endpoint + 2, // OUT endpoint + device_addr // param hints + ); + + //create the usrp1 implementation guts + return device::sptr(new usrp1_impl(data_transport, usrp_ctrl)); +} + +UHD_STATIC_BLOCK(register_usrp1_device){ + device::register_device(&usrp1_find, &usrp1_make); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +usrp1_impl::usrp1_impl(uhd::transport::usb_zero_copy::sptr data_transport, + usrp_ctrl::sptr ctrl_transport) + : _data_transport(data_transport), _ctrl_transport(ctrl_transport) +{ + _iface = usrp1_iface::make(ctrl_transport); + + //create clock interface + _clock_ctrl = usrp1_clock_ctrl::make(_iface); + + //create codec interface + _codec_ctrls[DBOARD_SLOT_A] = usrp1_codec_ctrl::make( + _iface, _clock_ctrl, SPI_ENABLE_CODEC_A + ); + _codec_ctrls[DBOARD_SLOT_B] = usrp1_codec_ctrl::make( + _iface, _clock_ctrl, SPI_ENABLE_CODEC_B + ); + + //initialize the codecs + codec_init(); + + //initialize the mboard + mboard_init(); + + //initialize the dboards + dboard_init(); + + //initialize the dsps + rx_dsp_init(); + + //initialize the dsps + tx_dsp_init(); + + //initialize the send/recv + io_init(); + + //init the subdev specs + this->mboard_set(MBOARD_PROP_RX_SUBDEV_SPEC, subdev_spec_t()); + this->mboard_set(MBOARD_PROP_TX_SUBDEV_SPEC, subdev_spec_t()); +} + +usrp1_impl::~usrp1_impl(void){ + //Safely destruct all RAII objects in a device. + //This prevents the mboard deconstructor from throwing, + //which allows the device to be safely deconstructed. + BOOST_FOREACH(dboard_slot_t slot, _dboard_slots){ + UHD_SAFE_CALL(_dboard_managers[slot].reset();) + UHD_SAFE_CALL(_dboard_ifaces[slot].reset();) + UHD_SAFE_CALL(_codec_ctrls[slot].reset();) + } + UHD_SAFE_CALL(_clock_ctrl.reset();) + UHD_SAFE_CALL(_io_impl.reset();) +} + +bool usrp1_impl::recv_async_msg(uhd::async_metadata_t &, double timeout){ + //dummy fill-in for the recv_async_msg + boost::this_thread::sleep(boost::posix_time::microseconds(long(timeout*1e6))); + return false; +} + +/*********************************************************************** + * Device Get + **********************************************************************/ +void usrp1_impl::get(const wax::obj &key_, wax::obj &val) +{ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<device_prop_t>()){ + case DEVICE_PROP_NAME: + val = std::string("usrp1 device"); + return; + + case DEVICE_PROP_MBOARD: + UHD_ASSERT_THROW(key.name == ""); + val = _mboard_proxy->get_link(); + return; + + case DEVICE_PROP_MBOARD_NAMES: + val = prop_names_t(1, ""); //vector of size 1 with empty string + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * Device Set + **********************************************************************/ +void usrp1_impl::set(const wax::obj &, const wax::obj &) +{ + UHD_THROW_PROP_SET_ERROR(); +} diff --git a/host/lib/usrp/usrp1/usrp1_impl.hpp b/host/lib/usrp/usrp1/usrp1_impl.hpp new file mode 100644 index 000000000..9755c466d --- /dev/null +++ b/host/lib/usrp/usrp1/usrp1_impl.hpp @@ -0,0 +1,210 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp1_iface.hpp" +#include "usrp1_ctrl.hpp" +#include "clock_ctrl.hpp" +#include "codec_ctrl.hpp" +#include "soft_time_ctrl.hpp" +#include <uhd/device.hpp> +#include <uhd/utils/pimpl.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/types/otw_type.hpp> +#include <uhd/types/clock_config.hpp> +#include <uhd/types/stream_cmd.hpp> +#include <uhd/usrp/dboard_id.hpp> +#include <uhd/usrp/subdev_spec.hpp> +#include <uhd/usrp/dboard_eeprom.hpp> +#include <uhd/usrp/dboard_manager.hpp> +#include <uhd/transport/usb_zero_copy.hpp> + +#ifndef INCLUDED_USRP1_IMPL_HPP +#define INCLUDED_USRP1_IMPL_HPP + +/*! + * Simple wax obj proxy class: + * Provides a wax obj interface for a set and a get function. + * This allows us to create nested properties structures + * while maintaining flattened code within the implementation. + */ +class wax_obj_proxy : public wax::obj { +public: + typedef boost::function<void(const wax::obj &, wax::obj &)> get_t; + typedef boost::function<void(const wax::obj &, const wax::obj &)> set_t; + typedef boost::shared_ptr<wax_obj_proxy> sptr; + + static sptr make(const get_t &get, const set_t &set){ + return sptr(new wax_obj_proxy(get, set)); + } + +private: + get_t _get; set_t _set; + wax_obj_proxy(const get_t &get, const set_t &set): _get(get), _set(set) {}; + void get(const wax::obj &key, wax::obj &val) {return _get(key, val);} + void set(const wax::obj &key, const wax::obj &val) {return _set(key, val);} +}; + +/*! + * USRP1 implementation guts: + * The implementation details are encapsulated here. + * Handles properties on the mboard, dboard, dsps... + */ +class usrp1_impl : public uhd::device { +public: + //! used everywhere to differentiate slots/sides... + enum dboard_slot_t{ + DBOARD_SLOT_A = 'A', + DBOARD_SLOT_B = 'B' + }; + //and a way to enumerate through a list of the above... + static const std::vector<dboard_slot_t> _dboard_slots; + + //structors + usrp1_impl(uhd::transport::usb_zero_copy::sptr data_transport, + usrp_ctrl::sptr ctrl_transport); + + ~usrp1_impl(void); + + //the io interface + size_t send(const send_buffs_type &, + size_t, + const uhd::tx_metadata_t &, + const uhd::io_type_t &, + send_mode_t, double); + + size_t recv(const recv_buffs_type &, + size_t, uhd::rx_metadata_t &, + const uhd::io_type_t &, + recv_mode_t, double); + + size_t get_max_send_samps_per_packet(void) const; + + size_t get_max_recv_samps_per_packet(void) const; + + bool recv_async_msg(uhd::async_metadata_t &, double); + +private: + /*! + * Make a usrp1 dboard interface. + * \param iface the usrp1 interface object + * \param clock the clock control interface + * \param codec the codec control interface + * \param dboard_slot the slot identifier + * \param rx_dboard_id the db id for the rx board (used for evil dbsrx purposes) + * \return a sptr to a new dboard interface + */ + static uhd::usrp::dboard_iface::sptr make_dboard_iface( + usrp1_iface::sptr iface, + usrp1_clock_ctrl::sptr clock, + usrp1_codec_ctrl::sptr codec, + dboard_slot_t dboard_slot, + const uhd::usrp::dboard_id_t &rx_dboard_id + ); + + //soft time control emulation + uhd::usrp::soft_time_ctrl::sptr _soft_time_ctrl; + + //interface to ioctls and file descriptor + usrp1_iface::sptr _iface; + + //handle io stuff + UHD_PIMPL_DECL(io_impl) _io_impl; + void io_init(void); + void rx_stream_on_off(bool); + void handle_overrun(size_t); + + //underrun and overrun poll intervals + size_t _rx_samps_per_poll_interval; + size_t _tx_samps_per_poll_interval; + + //otw types + uhd::otw_type_t _rx_otw_type; + uhd::otw_type_t _tx_otw_type; + + //configuration shadows + uhd::clock_config_t _clock_config; + uhd::usrp::subdev_spec_t _rx_subdev_spec, _tx_subdev_spec; + + //clock control + usrp1_clock_ctrl::sptr _clock_ctrl; + + //ad9862 codec control interface + uhd::dict<dboard_slot_t, usrp1_codec_ctrl::sptr> _codec_ctrls; + + //codec properties interfaces + void codec_init(void); + void rx_codec_get(const wax::obj &, wax::obj &, dboard_slot_t); + void rx_codec_set(const wax::obj &, const wax::obj &, dboard_slot_t); + void tx_codec_get(const wax::obj &, wax::obj &, dboard_slot_t); + void tx_codec_set(const wax::obj &, const wax::obj &, dboard_slot_t); + uhd::dict<dboard_slot_t, wax_obj_proxy::sptr> _rx_codec_proxies, _tx_codec_proxies; + + //device functions and settings + void get(const wax::obj &, wax::obj &); + void set(const wax::obj &, const wax::obj &); + + //mboard functions and settings + void mboard_init(void); + void mboard_get(const wax::obj &, wax::obj &); + void mboard_set(const wax::obj &, const wax::obj &); + wax_obj_proxy::sptr _mboard_proxy; + + //xx dboard functions and settings + void dboard_init(void); + uhd::dict<dboard_slot_t, uhd::usrp::dboard_manager::sptr> _dboard_managers; + uhd::dict<dboard_slot_t, uhd::usrp::dboard_iface::sptr> _dboard_ifaces; + + //rx dboard functions and settings + uhd::dict<dboard_slot_t, uhd::usrp::dboard_eeprom_t> _rx_db_eeproms; + void rx_dboard_get(const wax::obj &, wax::obj &, dboard_slot_t); + void rx_dboard_set(const wax::obj &, const wax::obj &, dboard_slot_t); + uhd::dict<dboard_slot_t, wax_obj_proxy::sptr> _rx_dboard_proxies; + + //tx dboard functions and settings + uhd::dict<dboard_slot_t, uhd::usrp::dboard_eeprom_t> _tx_db_eeproms; + void tx_dboard_get(const wax::obj &, wax::obj &, dboard_slot_t); + void tx_dboard_set(const wax::obj &, const wax::obj &, dboard_slot_t); + uhd::dict<dboard_slot_t, wax_obj_proxy::sptr> _tx_dboard_proxies; + + //rx dsp functions and settings + void rx_dsp_init(void); + void rx_dsp_get(const wax::obj &, wax::obj &, size_t); + void rx_dsp_set(const wax::obj &, const wax::obj &, size_t); + uhd::dict<size_t, double> _rx_dsp_freqs; + size_t _rx_dsp_decim; + uhd::dict<std::string, wax_obj_proxy::sptr> _rx_dsp_proxies; + + //tx dsp functions and settings + void tx_dsp_init(void); + void tx_dsp_get(const wax::obj &, wax::obj &, size_t); + void tx_dsp_set(const wax::obj &, const wax::obj &, size_t); + uhd::dict<size_t, double> _tx_dsp_freqs; + size_t _tx_dsp_interp; + uhd::dict<std::string, wax_obj_proxy::sptr> _tx_dsp_proxies; + + //transports + uhd::transport::usb_zero_copy::sptr _data_transport; + usrp_ctrl::sptr _ctrl_transport; + + //capabilities + size_t get_num_ducs(void); + size_t get_num_ddcs(void); + bool has_rx_halfband(void); + bool has_tx_halfband(void); +}; + +#endif /* INCLUDED_USRP1_IMPL_HPP */ diff --git a/host/lib/usrp/usrp2/CMakeLists.txt b/host/lib/usrp/usrp2/CMakeLists.txt new file mode 100644 index 000000000..e8811a8fb --- /dev/null +++ b/host/lib/usrp/usrp2/CMakeLists.txt @@ -0,0 +1,46 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# This file included, use CMake directory variables +######################################################################## + +######################################################################## +# Conditionally configure the USRP2 support +######################################################################## +LIBUHD_REGISTER_COMPONENT("USRP2" ENABLE_USRP2 ON "ENABLE_LIBUHD" OFF) + +IF(ENABLE_USRP2) + LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/clock_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/clock_ctrl.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/codec_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/codec_ctrl.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/codec_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dboard_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dboard_iface.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dsp_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/io_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/mboard_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp2_iface.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp2_iface.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp2_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp2_impl.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp2_regs.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp2_regs.cpp + ) +ENDIF(ENABLE_USRP2) diff --git a/host/lib/usrp/usrp2/clock_ctrl.cpp b/host/lib/usrp/usrp2/clock_ctrl.cpp new file mode 100644 index 000000000..abda53bf2 --- /dev/null +++ b/host/lib/usrp/usrp2/clock_ctrl.cpp @@ -0,0 +1,364 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "clock_ctrl.hpp" +#include "ad9510_regs.hpp" +#include "usrp2_regs.hpp" //spi slave constants +#include "usrp2_clk_regs.hpp" +#include <uhd/utils/assert_has.hpp> +#include <boost/cstdint.hpp> +#include <boost/lexical_cast.hpp> +#include <boost/math/special_functions/round.hpp> +#include <iostream> + +using namespace uhd; + +static const bool enb_test_clk = false; + +/*! + * A usrp2 clock control specific to the ad9510 ic. + */ +class usrp2_clock_ctrl_impl : public usrp2_clock_ctrl{ +public: + usrp2_clock_ctrl_impl(usrp2_iface::sptr iface){ + _iface = iface; + clk_regs = usrp2_clk_regs_t(_iface->get_rev()); + + _ad9510_regs.cp_current_setting = ad9510_regs_t::CP_CURRENT_SETTING_3_0MA; + this->write_reg(clk_regs.pll_3); + + // Setup the clock registers to 100MHz: + // This was already done by the firmware (or the host couldnt communicate). + // We could remove this part, and just leave it to the firmware. + // But why not leave it in for those who want to mess with clock settings? + // 100mhz = 10mhz/R * (P*B + A) + + _ad9510_regs.pll_power_down = ad9510_regs_t::PLL_POWER_DOWN_NORMAL; + _ad9510_regs.prescaler_value = ad9510_regs_t::PRESCALER_VALUE_DIV2; + this->write_reg(clk_regs.pll_4); + + _ad9510_regs.acounter = 0; + this->write_reg(clk_regs.acounter); + + _ad9510_regs.bcounter_msb = 0; + _ad9510_regs.bcounter_lsb = 5; + this->write_reg(clk_regs.bcounter_msb); + this->write_reg(clk_regs.bcounter_lsb); + + _ad9510_regs.ref_counter_msb = 0; + _ad9510_regs.ref_counter_lsb = 1; // r divider = 1 + this->write_reg(clk_regs.ref_counter_msb); + this->write_reg(clk_regs.ref_counter_lsb); + + /* regs will be updated in commands below */ + + this->enable_external_ref(false); + this->enable_rx_dboard_clock(false); + this->enable_tx_dboard_clock(false); + this->enable_mimo_clock_out(false); + + /* private clock enables, must be set here */ + this->enable_dac_clock(true); + this->enable_adc_clock(true); + this->enable_test_clock(enb_test_clk); + } + + ~usrp2_clock_ctrl_impl(void){ + //power down clock outputs + this->enable_external_ref(false); + this->enable_rx_dboard_clock(false); + this->enable_tx_dboard_clock(false); + this->enable_dac_clock(false); + this->enable_adc_clock(false); + this->enable_mimo_clock_out(false); + this->enable_test_clock(false); + } + + void enable_mimo_clock_out(bool enb){ + //calculate the low and high dividers + size_t divider = size_t(this->get_master_clock_rate()/10e6); + size_t high = divider/2; + size_t low = divider - high; + + switch(clk_regs.exp){ + case 2: //U2 rev 3 + _ad9510_regs.power_down_lvpecl_out2 = enb? + ad9510_regs_t::POWER_DOWN_LVPECL_OUT2_NORMAL : + ad9510_regs_t::POWER_DOWN_LVPECL_OUT2_SAFE_PD; + _ad9510_regs.output_level_lvpecl_out2 = ad9510_regs_t::OUTPUT_LEVEL_LVPECL_OUT2_810MV; + //set the registers (divider - 1) + _ad9510_regs.divider_low_cycles_out2 = low - 1; + _ad9510_regs.divider_high_cycles_out2 = high - 1; + _ad9510_regs.bypass_divider_out2 = 0; + break; + + case 5: //U2 rev 4 + _ad9510_regs.power_down_lvds_cmos_out5 = enb? 0 : 1; + _ad9510_regs.lvds_cmos_select_out5 = ad9510_regs_t::LVDS_CMOS_SELECT_OUT5_LVDS; + _ad9510_regs.output_level_lvds_out5 = ad9510_regs_t::OUTPUT_LEVEL_LVDS_OUT5_1_75MA; + //set the registers (divider - 1) + _ad9510_regs.divider_low_cycles_out5 = low - 1; + _ad9510_regs.divider_high_cycles_out5 = high - 1; + _ad9510_regs.bypass_divider_out5 = 0; + break; + + case 6: //U2+ + _ad9510_regs.power_down_lvds_cmos_out6 = enb? 0 : 1; + _ad9510_regs.lvds_cmos_select_out6 = ad9510_regs_t::LVDS_CMOS_SELECT_OUT6_LVDS; + _ad9510_regs.output_level_lvds_out6 = ad9510_regs_t::OUTPUT_LEVEL_LVDS_OUT6_1_75MA; + //set the registers (divider - 1) + _ad9510_regs.divider_low_cycles_out6 = low - 1; + _ad9510_regs.divider_high_cycles_out6 = high - 1; + _ad9510_regs.bypass_divider_out5 = 0; + break; + + default: + break; + } + this->write_reg(clk_regs.output(clk_regs.exp)); + this->write_reg(clk_regs.div_lo(clk_regs.exp)); + this->update_regs(); + } + + //uses output clock 7 (cmos) + void enable_rx_dboard_clock(bool enb){ + _ad9510_regs.power_down_lvds_cmos_out7 = enb? 0 : 1; + _ad9510_regs.lvds_cmos_select_out7 = ad9510_regs_t::LVDS_CMOS_SELECT_OUT7_CMOS; + _ad9510_regs.output_level_lvds_out7 = ad9510_regs_t::OUTPUT_LEVEL_LVDS_OUT7_1_75MA; + this->write_reg(clk_regs.output(clk_regs.rx_db)); + this->update_regs(); + } + + void set_rate_rx_dboard_clock(double rate){ + assert_has(get_rates_rx_dboard_clock(), rate, "rx dboard clock rate"); + size_t divider = size_t(get_master_clock_rate()/rate); + //bypass when the divider ratio is one + _ad9510_regs.bypass_divider_out7 = (divider == 1)? 1 : 0; + //calculate the low and high dividers + size_t high = divider/2; + size_t low = divider - high; + //set the registers (divider - 1) + _ad9510_regs.divider_low_cycles_out7 = low - 1; + _ad9510_regs.divider_high_cycles_out7 = high - 1; + //write the registers + this->write_reg(clk_regs.div_lo(clk_regs.rx_db)); + this->write_reg(clk_regs.div_hi(clk_regs.rx_db)); + this->update_regs(); + } + + std::vector<double> get_rates_rx_dboard_clock(void){ + std::vector<double> rates; + for (size_t i = 1; i <= 16+16; i++) rates.push_back(get_master_clock_rate()/i); + return rates; + } + + //uses output clock 6 (cmos) on USRP2 and output clock 5 (cmos) on USRP2+ + void enable_tx_dboard_clock(bool enb){ + switch(clk_regs.tx_db) { + case 5: //USRP2+ + _ad9510_regs.power_down_lvds_cmos_out5 = enb? 0 : 1; + _ad9510_regs.lvds_cmos_select_out5 = ad9510_regs_t::LVDS_CMOS_SELECT_OUT5_CMOS; + _ad9510_regs.output_level_lvds_out5 = ad9510_regs_t::OUTPUT_LEVEL_LVDS_OUT5_1_75MA; + break; + case 6: //USRP2 + _ad9510_regs.power_down_lvds_cmos_out6 = enb? 0 : 1; + _ad9510_regs.lvds_cmos_select_out6 = ad9510_regs_t::LVDS_CMOS_SELECT_OUT6_CMOS; + _ad9510_regs.output_level_lvds_out6 = ad9510_regs_t::OUTPUT_LEVEL_LVDS_OUT6_1_75MA; + break; + } + + this->write_reg(clk_regs.output(clk_regs.tx_db)); + this->update_regs(); + } + + void set_rate_tx_dboard_clock(double rate){ + assert_has(get_rates_tx_dboard_clock(), rate, "tx dboard clock rate"); + size_t divider = size_t(get_master_clock_rate()/rate); + //bypass when the divider ratio is one + _ad9510_regs.bypass_divider_out6 = (divider == 1)? 1 : 0; + //calculate the low and high dividers + size_t high = divider/2; + size_t low = divider - high; + + switch(clk_regs.tx_db) { + case 5: //USRP2+ + _ad9510_regs.bypass_divider_out5 = (divider == 1)? 1 : 0; + _ad9510_regs.divider_low_cycles_out5 = low - 1; + _ad9510_regs.divider_high_cycles_out5 = high - 1; + break; + case 6: //USRP2 + //bypass when the divider ratio is one + _ad9510_regs.bypass_divider_out6 = (divider == 1)? 1 : 0; + //set the registers (divider - 1) + _ad9510_regs.divider_low_cycles_out6 = low - 1; + _ad9510_regs.divider_high_cycles_out6 = high - 1; + break; + } + + //write the registers + this->write_reg(clk_regs.div_hi(clk_regs.tx_db)); + this->write_reg(clk_regs.div_lo(clk_regs.tx_db)); + this->update_regs(); + } + + std::vector<double> get_rates_tx_dboard_clock(void){ + return get_rates_rx_dboard_clock(); //same master clock, same dividers... + } + + void enable_test_clock(bool enb) { + _ad9510_regs.power_down_lvpecl_out0 = enb? + ad9510_regs_t::POWER_DOWN_LVPECL_OUT0_NORMAL : + ad9510_regs_t::POWER_DOWN_LVPECL_OUT0_SAFE_PD; + _ad9510_regs.output_level_lvpecl_out0 = ad9510_regs_t::OUTPUT_LEVEL_LVPECL_OUT0_810MV; + _ad9510_regs.divider_low_cycles_out0 = 0; + _ad9510_regs.divider_high_cycles_out0 = 0; + _ad9510_regs.bypass_divider_out0 = 1; + this->write_reg(0x3c); + this->write_reg(0x48); + this->write_reg(0x49); + } + + /*! + * If we are to use an external reference, enable the charge pump. + * \param enb true to enable the CP + */ + void enable_external_ref(bool enb){ + _ad9510_regs.charge_pump_mode = (enb)? + ad9510_regs_t::CHARGE_PUMP_MODE_NORMAL : + ad9510_regs_t::CHARGE_PUMP_MODE_3STATE ; + _ad9510_regs.pll_mux_control = ad9510_regs_t::PLL_MUX_CONTROL_DLD_HIGH; + _ad9510_regs.pfd_polarity = ad9510_regs_t::PFD_POLARITY_POS; + this->write_reg(clk_regs.pll_2); + this->update_regs(); + } + + double get_master_clock_rate(void){ + return 100e6; + } + + void set_mimo_clock_delay(double delay) { + //delay_val is a 5-bit value (0-31) for fine control + //the equations below determine delay for a given ramp current, # of caps and fine delay register + //delay range: + //range_ns = 200*((caps+3)/i_ramp_ua)*1.3286 + //offset (zero delay): + //offset_ns = 0.34 + (1600 - i_ramp_ua)*1e-4 + ((caps-1)/ramp)*6 + //delay_ns = offset_ns + range_ns * delay / 31 + + int delay_val = boost::math::iround(delay/9.744e-9*31); + + if(delay_val == 0) { + switch(clk_regs.exp) { + case 5: + _ad9510_regs.delay_control_out5 = 1; + break; + case 6: + _ad9510_regs.delay_control_out6 = 1; + break; + default: + break; //delay not supported on U2 rev 3 + } + } else { + switch(clk_regs.exp) { + case 5: + _ad9510_regs.delay_control_out5 = 0; + _ad9510_regs.ramp_current_out5 = ad9510_regs_t::RAMP_CURRENT_OUT5_200UA; + _ad9510_regs.ramp_capacitor_out5 = ad9510_regs_t::RAMP_CAPACITOR_OUT5_4CAPS; + _ad9510_regs.delay_fine_adjust_out5 = delay_val; + this->write_reg(0x34); + this->write_reg(0x35); + this->write_reg(0x36); + break; + case 6: + _ad9510_regs.delay_control_out6 = 0; + _ad9510_regs.ramp_current_out6 = ad9510_regs_t::RAMP_CURRENT_OUT6_200UA; + _ad9510_regs.ramp_capacitor_out6 = ad9510_regs_t::RAMP_CAPACITOR_OUT6_4CAPS; + _ad9510_regs.delay_fine_adjust_out6 = delay_val; + this->write_reg(0x38); + this->write_reg(0x39); + this->write_reg(0x3A); + break; + default: + break; + } + } + } + +private: + /*! + * Write a single register to the spi regs. + * \param addr the address to write + */ + void write_reg(boost::uint8_t addr){ + boost::uint32_t data = _ad9510_regs.get_write_reg(addr); + _iface->write_spi(SPI_SS_AD9510, spi_config_t::EDGE_RISE, data, 24); + } + + /*! + * Tells the ad9510 to latch the settings into the operational registers. + */ + void update_regs(void){ + _ad9510_regs.update_registers = 1; + this->write_reg(clk_regs.update); + } + + //uses output clock 3 (pecl) + //this is the same between USRP2 and USRP2+ and doesn't get a switch statement + void enable_dac_clock(bool enb){ + _ad9510_regs.power_down_lvpecl_out3 = (enb)? + ad9510_regs_t::POWER_DOWN_LVPECL_OUT3_NORMAL : + ad9510_regs_t::POWER_DOWN_LVPECL_OUT3_SAFE_PD; + _ad9510_regs.output_level_lvpecl_out3 = ad9510_regs_t::OUTPUT_LEVEL_LVPECL_OUT3_810MV; + _ad9510_regs.bypass_divider_out3 = 1; + this->write_reg(clk_regs.output(clk_regs.dac)); + this->write_reg(clk_regs.div_hi(clk_regs.dac)); + this->update_regs(); + } + + //uses output clock 4 (lvds) on USRP2 and output clock 2 (lvpecl) on USRP2+ + void enable_adc_clock(bool enb){ + switch(clk_regs.adc) { + case 2: + _ad9510_regs.power_down_lvpecl_out2 = enb? ad9510_regs_t::POWER_DOWN_LVPECL_OUT2_NORMAL : ad9510_regs_t::POWER_DOWN_LVPECL_OUT2_SAFE_PD; + _ad9510_regs.output_level_lvpecl_out2 = ad9510_regs_t::OUTPUT_LEVEL_LVPECL_OUT2_500MV; + _ad9510_regs.bypass_divider_out2 = 1; + break; + case 4: + _ad9510_regs.power_down_lvds_cmos_out4 = enb? 0 : 1; + _ad9510_regs.lvds_cmos_select_out4 = ad9510_regs_t::LVDS_CMOS_SELECT_OUT4_LVDS; + _ad9510_regs.output_level_lvds_out4 = ad9510_regs_t::OUTPUT_LEVEL_LVDS_OUT4_1_75MA; + _ad9510_regs.bypass_divider_out4 = 1; + break; + } + + this->write_reg(clk_regs.output(clk_regs.adc)); + this->write_reg(clk_regs.div_hi(clk_regs.adc)); + this->update_regs(); + } + + usrp2_iface::sptr _iface; + + usrp2_clk_regs_t clk_regs; + ad9510_regs_t _ad9510_regs; +}; + +/*********************************************************************** + * Public make function for the ad9510 clock control + **********************************************************************/ +usrp2_clock_ctrl::sptr usrp2_clock_ctrl::make(usrp2_iface::sptr iface){ + return sptr(new usrp2_clock_ctrl_impl(iface)); +} diff --git a/host/lib/usrp/usrp2/clock_ctrl.hpp b/host/lib/usrp/usrp2/clock_ctrl.hpp new file mode 100644 index 000000000..9ccbc959e --- /dev/null +++ b/host/lib/usrp/usrp2/clock_ctrl.hpp @@ -0,0 +1,109 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_CLOCK_CTRL_HPP +#define INCLUDED_CLOCK_CTRL_HPP + +#include "usrp2_iface.hpp" +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include <vector> + +class usrp2_clock_ctrl : boost::noncopyable{ +public: + typedef boost::shared_ptr<usrp2_clock_ctrl> sptr; + + /*! + * Make a clock config for the ad9510 ic. + * \param _iface a pointer to the usrp2 interface object + * \return a new clock control object + */ + static sptr make(usrp2_iface::sptr iface); + + /*! + * Get the master clock frequency for the fpga. + * \return the clock frequency in Hz + */ + virtual double get_master_clock_rate(void) = 0; + + /*! + * Enable/disable the rx dboard clock. + * \param enb true to enable + */ + virtual void enable_rx_dboard_clock(bool enb) = 0; + + /*! + * Set the clock rate on the rx dboard clock. + * \param rate the new clock rate + * \throw exception when rate invalid + */ + virtual void set_rate_rx_dboard_clock(double rate) = 0; + + /*! + * Get a list of possible rx dboard clock rates. + * \return a list of clock rates in Hz + */ + virtual std::vector<double> get_rates_rx_dboard_clock(void) = 0; + + /*! + * Enable/disable the tx dboard clock. + * \param enb true to enable + */ + virtual void enable_tx_dboard_clock(bool enb) = 0; + + /*! + * Set the clock rate on the tx dboard clock. + * \param rate the new clock rate + * \throw exception when rate invalid + */ + virtual void set_rate_tx_dboard_clock(double rate) = 0; + + /*! + * Get a list of possible tx dboard clock rates. + * \return a list of clock rates in Hz + */ + virtual std::vector<double> get_rates_tx_dboard_clock(void) = 0; + + /*! + * Enable/disable external reference. + * \param enb true to enable + */ + virtual void enable_external_ref(bool enb) = 0; + + /*! + * Enable/disable test clock output. + * \param enb true to enable + */ + virtual void enable_test_clock(bool enb) = 0; + + /*! + * Enable/disable the ref clock output over the serdes cable. + * \param enb true to enable + */ + virtual void enable_mimo_clock_out(bool enb) = 0; + + /*! + * Set the output delay of the mimo clock + * Used to synchronise daisy-chained USRPs over the MIMO cable + * Can also be used to adjust delay for uneven reference cable lengths + * \param delay the clock delay in seconds + */ + virtual void set_mimo_clock_delay(double delay) = 0; + +}; + +#endif /* INCLUDED_CLOCK_CTRL_HPP */ diff --git a/host/lib/usrp/usrp2/codec_ctrl.cpp b/host/lib/usrp/usrp2/codec_ctrl.cpp new file mode 100644 index 000000000..0fdcedf62 --- /dev/null +++ b/host/lib/usrp/usrp2/codec_ctrl.cpp @@ -0,0 +1,191 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "codec_ctrl.hpp" +#include "ad9777_regs.hpp" +#include "ads62p44_regs.hpp" +#include "usrp2_regs.hpp" +#include <uhd/exception.hpp> +#include <boost/cstdint.hpp> +#include <boost/foreach.hpp> +#include <iostream> + +static const bool codec_ctrl_debug = false; + +using namespace uhd; + +/*! + * A usrp2 codec control specific to the ad9777 ic. + */ +class usrp2_codec_ctrl_impl : public usrp2_codec_ctrl{ +public: + usrp2_codec_ctrl_impl(usrp2_iface::sptr iface){ + _iface = iface; + + //setup the ad9777 dac + _ad9777_regs.x_1r_2r_mode = ad9777_regs_t::X_1R_2R_MODE_1R; + _ad9777_regs.filter_interp_rate = ad9777_regs_t::FILTER_INTERP_RATE_4X; + _ad9777_regs.mix_mode = ad9777_regs_t::MIX_MODE_COMPLEX; + _ad9777_regs.pll_divide_ratio = ad9777_regs_t::PLL_DIVIDE_RATIO_DIV1; + _ad9777_regs.pll_state = ad9777_regs_t::PLL_STATE_ON; + _ad9777_regs.auto_cp_control = ad9777_regs_t::AUTO_CP_CONTROL_AUTO; + //I dac values + _ad9777_regs.idac_fine_gain_adjust = 0; + _ad9777_regs.idac_coarse_gain_adjust = 0xf; + _ad9777_regs.idac_offset_adjust_lsb = 0; + _ad9777_regs.idac_offset_adjust_msb = 0; + //Q dac values + _ad9777_regs.qdac_fine_gain_adjust = 0; + _ad9777_regs.qdac_coarse_gain_adjust = 0xf; + _ad9777_regs.qdac_offset_adjust_lsb = 0; + _ad9777_regs.qdac_offset_adjust_msb = 0; + //write all regs + for(boost::uint8_t addr = 0; addr <= 0xC; addr++){ + this->send_ad9777_reg(addr); + } + set_tx_mod_mode(0); + + //power-up adc + switch(_iface->get_rev()){ + case usrp2_iface::USRP2_REV3: + case usrp2_iface::USRP2_REV4: + _iface->poke32(_iface->regs.misc_ctrl_adc, U2_FLAG_MISC_CTRL_ADC_ON); + break; + + case usrp2_iface::USRP_N200: + case usrp2_iface::USRP_N210: + _ads62p44_regs.reset = 1; + this->send_ads62p44_reg(0x00); //issue a reset to the ADC + //everything else should be pretty much default, i think + //_ads62p44_regs.decimation = DECIMATION_DECIMATE_1; + _ads62p44_regs.power_down = ads62p44_regs_t::POWER_DOWN_NORMAL; + this->send_ads62p44_reg(0x14); + this->set_rx_analog_gain(1); + break; + + case usrp2_iface::USRP_NXXX: break; + } + } + + ~usrp2_codec_ctrl_impl(void){ + //power-down dac + _ad9777_regs.power_down_mode = 1; + this->send_ad9777_reg(0); + + //power-down adc + switch(_iface->get_rev()){ + case usrp2_iface::USRP2_REV3: + case usrp2_iface::USRP2_REV4: + _iface->poke32(_iface->regs.misc_ctrl_adc, U2_FLAG_MISC_CTRL_ADC_OFF); + break; + + case usrp2_iface::USRP_N200: + case usrp2_iface::USRP_N210: + //send a global power-down to the ADC here... it will get lifted on reset + _ads62p44_regs.power_down = ads62p44_regs_t::POWER_DOWN_GLOBAL_PD; + this->send_ads62p44_reg(0x14); + break; + + case usrp2_iface::USRP_NXXX: break; + } + } + + void set_tx_mod_mode(int mod_mode){ + //set the sign of the frequency shift + _ad9777_regs.modulation_form = (mod_mode > 0)? + ad9777_regs_t::MODULATION_FORM_E_PLUS_JWT: + ad9777_regs_t::MODULATION_FORM_E_MINUS_JWT + ; + + //set the frequency shift + switch(std::abs(mod_mode)){ + case 0: + case 1: _ad9777_regs.modulation_mode = ad9777_regs_t::MODULATION_MODE_NONE; break; + case 2: _ad9777_regs.modulation_mode = ad9777_regs_t::MODULATION_MODE_FS_2; break; + case 4: _ad9777_regs.modulation_mode = ad9777_regs_t::MODULATION_MODE_FS_4; break; + case 8: _ad9777_regs.modulation_mode = ad9777_regs_t::MODULATION_MODE_FS_8; break; + default: throw uhd::value_error("unknown modulation mode for ad9777"); + } + + this->send_ad9777_reg(0x01); //set the register + } + + void set_rx_digital_gain(double gain) { //fine digital gain + switch(_iface->get_rev()){ + case usrp2_iface::USRP_N200: + case usrp2_iface::USRP_N210: + _ads62p44_regs.fine_gain = int(gain/0.5); + this->send_ads62p44_reg(0x17); + break; + + default: UHD_THROW_INVALID_CODE_PATH(); + } + } + + void set_rx_digital_fine_gain(double gain) { //gain correction + switch(_iface->get_rev()){ + case usrp2_iface::USRP_N200: + case usrp2_iface::USRP_N210: + _ads62p44_regs.gain_correction = int(gain / 0.05); + this->send_ads62p44_reg(0x1A); + break; + + default: UHD_THROW_INVALID_CODE_PATH(); + } + } + + void set_rx_analog_gain(bool /*gain*/) { //turns on/off analog 3.5dB preamp + switch(_iface->get_rev()){ + case usrp2_iface::USRP_N200: + case usrp2_iface::USRP_N210: + _ads62p44_regs.coarse_gain = ads62p44_regs_t::COARSE_GAIN_3_5DB;//gain ? ads62p44_regs_t::COARSE_GAIN_3_5DB : ads62p44_regs_t::COARSE_GAIN_0DB; + this->send_ads62p44_reg(0x14); + break; + + default: UHD_THROW_INVALID_CODE_PATH(); + } + } + +private: + ad9777_regs_t _ad9777_regs; + ads62p44_regs_t _ads62p44_regs; + usrp2_iface::sptr _iface; + + void send_ad9777_reg(boost::uint8_t addr){ + boost::uint16_t reg = _ad9777_regs.get_write_reg(addr); + if (codec_ctrl_debug) std::cout << "send_ad9777_reg: " << std::hex << reg << std::endl; + _iface->write_spi( + SPI_SS_AD9777, spi_config_t::EDGE_RISE, + reg, 16 + ); + } + + void send_ads62p44_reg(boost::uint8_t addr) { + boost::uint16_t reg = _ads62p44_regs.get_write_reg(addr); + _iface->write_spi( + SPI_SS_ADS62P44, spi_config_t::EDGE_FALL, + reg, 16 + ); + } +}; + +/*********************************************************************** + * Public make function for the usrp2 codec control + **********************************************************************/ +usrp2_codec_ctrl::sptr usrp2_codec_ctrl::make(usrp2_iface::sptr iface){ + return sptr(new usrp2_codec_ctrl_impl(iface)); +} diff --git a/host/lib/usrp/usrp2/codec_ctrl.hpp b/host/lib/usrp/usrp2/codec_ctrl.hpp new file mode 100644 index 000000000..ca300e2b1 --- /dev/null +++ b/host/lib/usrp/usrp2/codec_ctrl.hpp @@ -0,0 +1,68 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_CODEC_CTRL_HPP +#define INCLUDED_CODEC_CTRL_HPP + +#include "usrp2_iface.hpp" +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> + +class usrp2_codec_ctrl : boost::noncopyable{ +public: + typedef boost::shared_ptr<usrp2_codec_ctrl> sptr; + + /*! + * Make a codec control for the DAC and ADC. + * \param _iface a pointer to the usrp2 interface object + * \return a new codec control object + */ + static sptr make(usrp2_iface::sptr iface); + + /*! + * Set the modulation mode for the DAC. + * Possible modes are 0, +/-1, +/-2, +/-4, +/-8 + * which correspond to shifts of fs/mod_mode. + * A mode of 0 or +/-1 means no modulation. + * \param mod_mode the modulation mode + */ + virtual void set_tx_mod_mode(int mod_mode) = 0; + + /*! + * Set the analog preamplifier on the USRP2+ ADC (ADS62P44). + * \param gain enable or disable the 3.5dB preamp + */ + + virtual void set_rx_analog_gain(bool gain) = 0; + + /*! + * Set the digital gain on the USRP2+ ADC (ADS62P44). + * \param gain from 0-6dB + */ + + virtual void set_rx_digital_gain(double gain) = 0; + + /*! + * Set the digital gain correction on the USRP2+ ADC (ADS62P44). + * \param gain from 0-0.5dB + */ + + virtual void set_rx_digital_fine_gain(double gain) = 0; + +}; + +#endif /* INCLUDED_CODEC_CTRL_HPP */ diff --git a/host/lib/usrp/usrp2/codec_impl.cpp b/host/lib/usrp/usrp2/codec_impl.cpp new file mode 100644 index 000000000..50320773f --- /dev/null +++ b/host/lib/usrp/usrp2/codec_impl.cpp @@ -0,0 +1,179 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp2_impl.hpp" +#include <uhd/utils/assert_has.hpp> +#include <uhd/exception.hpp> +#include <uhd/usrp/codec_props.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/types/ranges.hpp> +#include <boost/bind.hpp> +#include <boost/assign/list_of.hpp> + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +//this only applies to N2XX +static const uhd::dict<std::string, gain_range_t> codec_rx_gain_ranges = map_list_of + ("digital", gain_range_t(0, 6.0, 0.5)) + ("digital-fine", gain_range_t(0, 0.5, 0.05)); + + +/*********************************************************************** + * Helper Methods + **********************************************************************/ +void usrp2_mboard_impl::codec_init(void){ + //make proxies + _rx_codec_proxy = wax_obj_proxy::make( + boost::bind(&usrp2_mboard_impl::rx_codec_get, this, _1, _2), + boost::bind(&usrp2_mboard_impl::rx_codec_set, this, _1, _2) + ); + _tx_codec_proxy = wax_obj_proxy::make( + boost::bind(&usrp2_mboard_impl::tx_codec_get, this, _1, _2), + boost::bind(&usrp2_mboard_impl::tx_codec_set, this, _1, _2) + ); + + //initialize gain names. keeps get_rx_gain() from getting a gain + //that hasn't been set yet. + BOOST_FOREACH(std::string key, codec_rx_gain_ranges.keys()) { + _codec_rx_gains[key] = codec_rx_gain_ranges[key].start(); + } +} + +/*********************************************************************** + * RX Codec Properties + **********************************************************************/ +void usrp2_mboard_impl::rx_codec_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<codec_prop_t>()){ + case CODEC_PROP_NAME: + switch(_iface->get_rev()){ + case usrp2_iface::USRP_N200: + case usrp2_iface::USRP_N210: + val = _iface->get_cname() + " adc - ads62p44"; + break; + + case usrp2_iface::USRP2_REV3: + case usrp2_iface::USRP2_REV4: + val = _iface->get_cname() + " adc - ltc2284"; + break; + + case usrp2_iface::USRP_NXXX: + val = _iface->get_cname() + " adc - ??????"; + break; + } + return; + + case CODEC_PROP_OTHERS: + val = prop_names_t(); + return; + + case CODEC_PROP_GAIN_NAMES: + switch(_iface->get_rev()){ + case usrp2_iface::USRP_N200: + case usrp2_iface::USRP_N210: + val = prop_names_t(codec_rx_gain_ranges.keys()); + return; + + default: val = prop_names_t(); + } + return; + + case CODEC_PROP_GAIN_I: + case CODEC_PROP_GAIN_Q: + assert_has(_codec_rx_gains.keys(), key.name, "codec rx gain name"); + val = _codec_rx_gains[key.name]; + return; + + case CODEC_PROP_GAIN_RANGE: + assert_has(codec_rx_gain_ranges.keys(), key.name, "codec rx gain range name"); + val = codec_rx_gain_ranges[key.name]; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void usrp2_mboard_impl::rx_codec_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<codec_prop_t>()) { + case CODEC_PROP_GAIN_I: + case CODEC_PROP_GAIN_Q: + this->rx_codec_set_gain(val.as<double>(), key.name); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * Helper function to set RX codec gain + ***********************************************************************/ + +void usrp2_mboard_impl::rx_codec_set_gain(double gain, const std::string &name){ + assert_has(codec_rx_gain_ranges.keys(), name, "codec rx gain name"); + + _codec_rx_gains[name] = gain; +/* + if(name == "analog") { + _codec_ctrl->set_rx_analog_gain(gain > 0); //just turn it on or off + return; + } +*/ + if(name == "digital") { + _codec_ctrl->set_rx_digital_gain(gain); + return; + } + if(name == "digital-fine") { + _codec_ctrl->set_rx_digital_fine_gain(gain); + return; + } + UHD_THROW_PROP_SET_ERROR(); +} + + +/*********************************************************************** + * TX Codec Properties + **********************************************************************/ +void usrp2_mboard_impl::tx_codec_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<codec_prop_t>()){ + case CODEC_PROP_NAME: + val = _iface->get_cname() + " dac - ad9777"; + return; + + case CODEC_PROP_OTHERS: + val = prop_names_t(); + return; + + case CODEC_PROP_GAIN_NAMES: + val = prop_names_t(); //no gain elements to be controlled + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void usrp2_mboard_impl::tx_codec_set(const wax::obj &, const wax::obj &){ + UHD_THROW_PROP_SET_ERROR(); +} diff --git a/host/lib/usrp/usrp2/dboard_iface.cpp b/host/lib/usrp/usrp2/dboard_iface.cpp new file mode 100644 index 000000000..924a6e901 --- /dev/null +++ b/host/lib/usrp/usrp2/dboard_iface.cpp @@ -0,0 +1,350 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp2_iface.hpp" +#include "clock_ctrl.hpp" +#include "usrp2_regs.hpp" //wishbone address constants +#include <uhd/usrp/dboard_iface.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/algorithm.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/asio.hpp> //htonl and ntohl +#include <boost/math/special_functions/round.hpp> +#include "ad7922_regs.hpp" //aux adc +#include "ad5623_regs.hpp" //aux dac + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +class usrp2_dboard_iface : public dboard_iface{ +public: + usrp2_dboard_iface(usrp2_iface::sptr iface, usrp2_clock_ctrl::sptr clock_ctrl); + ~usrp2_dboard_iface(void); + + special_props_t get_special_props(void){ + special_props_t props; + props.soft_clock_divider = false; + props.mangle_i2c_addrs = false; + return props; + } + + void write_aux_dac(unit_t, aux_dac_t, double); + double read_aux_adc(unit_t, aux_adc_t); + + void _set_pin_ctrl(unit_t, boost::uint16_t); + void _set_atr_reg(unit_t, atr_reg_t, boost::uint16_t); + void _set_gpio_ddr(unit_t, boost::uint16_t); + void _set_gpio_out(unit_t, boost::uint16_t); + void set_gpio_debug(unit_t, int); + boost::uint16_t read_gpio(unit_t); + + void write_i2c(boost::uint8_t, const byte_vector_t &); + byte_vector_t read_i2c(boost::uint8_t, size_t); + + void set_clock_rate(unit_t, double); + double get_clock_rate(unit_t); + std::vector<double> get_clock_rates(unit_t); + void set_clock_enabled(unit_t, bool); + double get_codec_rate(unit_t); + + void write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits + ); + + boost::uint32_t read_write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits + ); + +private: + usrp2_iface::sptr _iface; + usrp2_clock_ctrl::sptr _clock_ctrl; + boost::uint32_t _ddr_shadow; + boost::uint32_t _gpio_shadow; + + uhd::dict<unit_t, ad5623_regs_t> _dac_regs; + uhd::dict<unit_t, double> _clock_rates; + void _write_aux_dac(unit_t); +}; + +/*********************************************************************** + * Make Function + **********************************************************************/ +dboard_iface::sptr make_usrp2_dboard_iface( + usrp2_iface::sptr iface, + usrp2_clock_ctrl::sptr clock_ctrl +){ + return dboard_iface::sptr(new usrp2_dboard_iface(iface, clock_ctrl)); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +usrp2_dboard_iface::usrp2_dboard_iface( + usrp2_iface::sptr iface, + usrp2_clock_ctrl::sptr clock_ctrl +){ + _iface = iface; + _clock_ctrl = clock_ctrl; + _ddr_shadow = 0; + _gpio_shadow = 0; + + //reset the aux dacs + _dac_regs[UNIT_RX] = ad5623_regs_t(); + _dac_regs[UNIT_TX] = ad5623_regs_t(); + BOOST_FOREACH(unit_t unit, _dac_regs.keys()){ + _dac_regs[unit].data = 1; + _dac_regs[unit].addr = ad5623_regs_t::ADDR_ALL; + _dac_regs[unit].cmd = ad5623_regs_t::CMD_RESET; + this->_write_aux_dac(unit); + } + + //init the clock rate shadows with max rate clock + this->set_clock_rate(UNIT_RX, sorted(this->get_clock_rates(UNIT_RX)).back()); + this->set_clock_rate(UNIT_TX, sorted(this->get_clock_rates(UNIT_TX)).back()); +} + +usrp2_dboard_iface::~usrp2_dboard_iface(void){ + /* NOP */ +} + +/*********************************************************************** + * Clocks + **********************************************************************/ +void usrp2_dboard_iface::set_clock_rate(unit_t unit, double rate){ + _clock_rates[unit] = rate; //set to shadow + switch(unit){ + case UNIT_RX: _clock_ctrl->set_rate_rx_dboard_clock(rate); return; + case UNIT_TX: _clock_ctrl->set_rate_tx_dboard_clock(rate); return; + } +} + +double usrp2_dboard_iface::get_clock_rate(unit_t unit){ + return _clock_rates[unit]; //get from shadow +} + +std::vector<double> usrp2_dboard_iface::get_clock_rates(unit_t unit){ + switch(unit){ + case UNIT_RX: return _clock_ctrl->get_rates_rx_dboard_clock(); + case UNIT_TX: return _clock_ctrl->get_rates_tx_dboard_clock(); + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +void usrp2_dboard_iface::set_clock_enabled(unit_t unit, bool enb){ + switch(unit){ + case UNIT_RX: _clock_ctrl->enable_rx_dboard_clock(enb); return; + case UNIT_TX: _clock_ctrl->enable_tx_dboard_clock(enb); return; + } +} + +double usrp2_dboard_iface::get_codec_rate(unit_t){ + return _clock_ctrl->get_master_clock_rate(); +} +/*********************************************************************** + * GPIO + **********************************************************************/ +static const uhd::dict<dboard_iface::unit_t, int> unit_to_shift = map_list_of + (dboard_iface::UNIT_RX, 0) + (dboard_iface::UNIT_TX, 16) +; + +void usrp2_dboard_iface::_set_pin_ctrl(unit_t unit, boost::uint16_t value){ + //calculate the new selection mux setting + boost::uint32_t new_sels = 0x0; + for(size_t i = 0; i < 16; i++){ + bool is_bit_set = (value & (0x1 << i)) != 0; + new_sels |= ((is_bit_set)? U2_FLAG_GPIO_SEL_ATR : U2_FLAG_GPIO_SEL_GPIO) << (i*2); + } + + //write the selection mux value to register + switch(unit){ + case UNIT_RX: _iface->poke32(_iface->regs.gpio_rx_sel, new_sels); return; + case UNIT_TX: _iface->poke32(_iface->regs.gpio_tx_sel, new_sels); return; + } +} + +void usrp2_dboard_iface::_set_gpio_ddr(unit_t unit, boost::uint16_t value){ + _ddr_shadow = \ + (_ddr_shadow & ~(0xffff << unit_to_shift[unit])) | + (boost::uint32_t(value) << unit_to_shift[unit]); + _iface->poke32(_iface->regs.gpio_ddr, _ddr_shadow); +} + +void usrp2_dboard_iface::_set_gpio_out(unit_t unit, boost::uint16_t value){ + _gpio_shadow = \ + (_gpio_shadow & ~(0xffff << unit_to_shift[unit])) | + (boost::uint32_t(value) << unit_to_shift[unit]); + _iface->poke32(_iface->regs.gpio_io, _gpio_shadow); +} + +boost::uint16_t usrp2_dboard_iface::read_gpio(unit_t unit){ + return boost::uint16_t(_iface->peek32(_iface->regs.gpio_io) >> unit_to_shift[unit]); +} + +void usrp2_dboard_iface::_set_atr_reg(unit_t unit, atr_reg_t atr, boost::uint16_t value){ + //define mapping of unit to atr regs to register address + static const uhd::dict< + unit_t, uhd::dict<atr_reg_t, boost::uint32_t> + > unit_to_atr_to_addr = map_list_of + (UNIT_RX, map_list_of + (ATR_REG_IDLE, _iface->regs.atr_idle_rxside) + (ATR_REG_TX_ONLY, _iface->regs.atr_intx_rxside) + (ATR_REG_RX_ONLY, _iface->regs.atr_inrx_rxside) + (ATR_REG_FULL_DUPLEX, _iface->regs.atr_full_rxside) + ) + (UNIT_TX, map_list_of + (ATR_REG_IDLE, _iface->regs.atr_idle_txside) + (ATR_REG_TX_ONLY, _iface->regs.atr_intx_txside) + (ATR_REG_RX_ONLY, _iface->regs.atr_inrx_txside) + (ATR_REG_FULL_DUPLEX, _iface->regs.atr_full_txside) + ) + ; + _iface->poke16(unit_to_atr_to_addr[unit][atr], value); +} + +void usrp2_dboard_iface::set_gpio_debug(unit_t unit, int which){ + this->set_gpio_ddr(unit, 0xffff); //all outputs + + //calculate the new selection mux setting + boost::uint32_t new_sels = 0x0; + int sel = (which == 0)? + U2_FLAG_GPIO_SEL_DEBUG_0: + U2_FLAG_GPIO_SEL_DEBUG_1; + for(size_t i = 0; i < 16; i++){ + new_sels |= sel << (i*2); + } + + //write the selection mux value to register + switch(unit){ + case UNIT_RX: _iface->poke32(_iface->regs.gpio_rx_sel, new_sels); return; + case UNIT_TX: _iface->poke32(_iface->regs.gpio_tx_sel, new_sels); return; + } +} + +/*********************************************************************** + * SPI + **********************************************************************/ +static const uhd::dict<dboard_iface::unit_t, int> unit_to_spi_dev = map_list_of + (dboard_iface::UNIT_TX, SPI_SS_TX_DB) + (dboard_iface::UNIT_RX, SPI_SS_RX_DB) +; + +void usrp2_dboard_iface::write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits +){ + _iface->write_spi(unit_to_spi_dev[unit], config, data, num_bits); +} + +boost::uint32_t usrp2_dboard_iface::read_write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits +){ + return _iface->read_spi(unit_to_spi_dev[unit], config, data, num_bits); +} + +/*********************************************************************** + * I2C + **********************************************************************/ +void usrp2_dboard_iface::write_i2c(boost::uint8_t addr, const byte_vector_t &bytes){ + return _iface->write_i2c(addr, bytes); +} + +byte_vector_t usrp2_dboard_iface::read_i2c(boost::uint8_t addr, size_t num_bytes){ + return _iface->read_i2c(addr, num_bytes); +} + +/*********************************************************************** + * Aux DAX/ADC + **********************************************************************/ +void usrp2_dboard_iface::_write_aux_dac(unit_t unit){ + static const uhd::dict<unit_t, int> unit_to_spi_dac = map_list_of + (UNIT_RX, SPI_SS_RX_DAC) + (UNIT_TX, SPI_SS_TX_DAC) + ; + _iface->write_spi( + unit_to_spi_dac[unit], spi_config_t::EDGE_FALL, + _dac_regs[unit].get_reg(), 24 + ); +} + +void usrp2_dboard_iface::write_aux_dac(unit_t unit, aux_dac_t which, double value){ + _dac_regs[unit].data = boost::math::iround(4095*value/3.3); + _dac_regs[unit].cmd = ad5623_regs_t::CMD_WR_UP_DAC_CHAN_N; + + typedef uhd::dict<aux_dac_t, ad5623_regs_t::addr_t> aux_dac_to_addr; + static const uhd::dict<unit_t, aux_dac_to_addr> unit_to_which_to_addr = map_list_of + (UNIT_RX, map_list_of + (AUX_DAC_A, ad5623_regs_t::ADDR_DAC_B) + (AUX_DAC_B, ad5623_regs_t::ADDR_DAC_A) + (AUX_DAC_C, ad5623_regs_t::ADDR_DAC_A) + (AUX_DAC_D, ad5623_regs_t::ADDR_DAC_B) + ) + (UNIT_TX, map_list_of + (AUX_DAC_A, ad5623_regs_t::ADDR_DAC_A) + (AUX_DAC_B, ad5623_regs_t::ADDR_DAC_B) + (AUX_DAC_C, ad5623_regs_t::ADDR_DAC_B) + (AUX_DAC_D, ad5623_regs_t::ADDR_DAC_A) + ) + ; + _dac_regs[unit].addr = unit_to_which_to_addr[unit][which]; + this->_write_aux_dac(unit); +} + +double usrp2_dboard_iface::read_aux_adc(unit_t unit, aux_adc_t which){ + static const uhd::dict<unit_t, int> unit_to_spi_adc = map_list_of + (UNIT_RX, SPI_SS_RX_ADC) + (UNIT_TX, SPI_SS_TX_ADC) + ; + + //setup spi config args + spi_config_t config; + config.mosi_edge = spi_config_t::EDGE_FALL; + config.miso_edge = spi_config_t::EDGE_RISE; + + //setup the spi registers + ad7922_regs_t ad7922_regs; + switch(which){ + case AUX_ADC_A: ad7922_regs.mod = 0; break; + case AUX_ADC_B: ad7922_regs.mod = 1; break; + } ad7922_regs.chn = ad7922_regs.mod; //normal mode: mod == chn + + //write and read spi + _iface->write_spi( + unit_to_spi_adc[unit], config, + ad7922_regs.get_reg(), 16 + ); + ad7922_regs.set_reg(boost::uint16_t(_iface->read_spi( + unit_to_spi_adc[unit], config, + ad7922_regs.get_reg(), 16 + ))); + + //convert to voltage and return + return 3.3*ad7922_regs.result/4095; +} diff --git a/host/lib/usrp/usrp2/dboard_impl.cpp b/host/lib/usrp/usrp2/dboard_impl.cpp new file mode 100644 index 000000000..3f41cddcf --- /dev/null +++ b/host/lib/usrp/usrp2/dboard_impl.cpp @@ -0,0 +1,171 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp2_impl.hpp" +#include "usrp2_regs.hpp" +#include "fw_common.h" +#include <uhd/usrp/misc_utils.hpp> +#include <uhd/usrp/dsp_utils.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/usrp/dboard_props.hpp> +#include <uhd/exception.hpp> +#include <boost/format.hpp> +#include <boost/bind.hpp> +#include <boost/asio.hpp> //htonl and ntohl +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * Helper Methods + **********************************************************************/ +void usrp2_mboard_impl::dboard_init(void){ + //read the dboard eeprom to extract the dboard ids + _rx_db_eeprom.load(*_iface, USRP2_I2C_ADDR_RX_DB); + _tx_db_eeprom.load(*_iface, USRP2_I2C_ADDR_TX_DB); + + //create a new dboard interface and manager + _dboard_iface = make_usrp2_dboard_iface(_iface, _clock_ctrl); + _dboard_manager = dboard_manager::make( + _rx_db_eeprom.id, _tx_db_eeprom.id, _dboard_iface + ); + + //load dboards + _rx_dboard_proxy = wax_obj_proxy::make( + boost::bind(&usrp2_mboard_impl::rx_dboard_get, this, _1, _2), + boost::bind(&usrp2_mboard_impl::rx_dboard_set, this, _1, _2) + ); + _tx_dboard_proxy = wax_obj_proxy::make( + boost::bind(&usrp2_mboard_impl::tx_dboard_get, this, _1, _2), + boost::bind(&usrp2_mboard_impl::tx_dboard_set, this, _1, _2) + ); +} + +/*********************************************************************** + * RX DBoard Properties + **********************************************************************/ +void usrp2_mboard_impl::rx_dboard_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_NAME: + val = _iface->get_cname() + " dboard (rx unit)"; + return; + + case DBOARD_PROP_SUBDEV: + val = _dboard_manager->get_rx_subdev(key.name); + return; + + case DBOARD_PROP_SUBDEV_NAMES: + val = _dboard_manager->get_rx_subdev_names(); + return; + + case DBOARD_PROP_DBOARD_EEPROM: + val = _rx_db_eeprom; + return; + + case DBOARD_PROP_DBOARD_IFACE: + val = _dboard_iface; + return; + + case DBOARD_PROP_CODEC: + val = _rx_codec_proxy->get_link(); + return; + + case DBOARD_PROP_GAIN_GROUP: + val = make_gain_group( + _rx_db_eeprom.id, + _dboard_manager->get_rx_subdev(key.name), + _rx_codec_proxy->get_link(), + GAIN_GROUP_POLICY_RX + ); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void usrp2_mboard_impl::rx_dboard_set(const wax::obj &key, const wax::obj &val){ + switch(key.as<dboard_prop_t>()){ + + case DBOARD_PROP_DBOARD_EEPROM: + _rx_db_eeprom = val.as<dboard_eeprom_t>(); + _rx_db_eeprom.store(*_iface, USRP2_I2C_ADDR_RX_DB); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX DBoard Properties + **********************************************************************/ +void usrp2_mboard_impl::tx_dboard_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_NAME: + val = _iface->get_cname() + " dboard (tx unit)"; + return; + + case DBOARD_PROP_SUBDEV: + val = _dboard_manager->get_tx_subdev(key.name); + return; + + case DBOARD_PROP_SUBDEV_NAMES: + val = _dboard_manager->get_tx_subdev_names(); + return; + + case DBOARD_PROP_DBOARD_EEPROM: + val = _tx_db_eeprom; + return; + + case DBOARD_PROP_DBOARD_IFACE: + val = _dboard_iface; + return; + + case DBOARD_PROP_CODEC: + val = _tx_codec_proxy->get_link(); + return; + + case DBOARD_PROP_GAIN_GROUP: + val = make_gain_group( + _tx_db_eeprom.id, + _dboard_manager->get_tx_subdev(key.name), + _tx_codec_proxy->get_link(), + GAIN_GROUP_POLICY_TX + ); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void usrp2_mboard_impl::tx_dboard_set(const wax::obj &key, const wax::obj &val){ + switch(key.as<dboard_prop_t>()){ + + case DBOARD_PROP_DBOARD_EEPROM: + _tx_db_eeprom = val.as<dboard_eeprom_t>(); + _tx_db_eeprom.store(*_iface, USRP2_I2C_ADDR_TX_DB); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/usrp2/dsp_impl.cpp b/host/lib/usrp/usrp2/dsp_impl.cpp new file mode 100644 index 000000000..cdd559e94 --- /dev/null +++ b/host/lib/usrp/usrp2/dsp_impl.cpp @@ -0,0 +1,266 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp2_impl.hpp" +#include "usrp2_regs.hpp" +#include <uhd/usrp/dsp_utils.hpp> +#include <uhd/usrp/dsp_props.hpp> +#include <boost/bind.hpp> +#include <boost/math/special_functions/round.hpp> +#include <boost/math/special_functions/sign.hpp> +#include <algorithm> +#include <cmath> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * DSP impl and methods + **********************************************************************/ +struct usrp2_mboard_impl::dsp_impl{ + uhd::dict<size_t, size_t> ddc_decim; + uhd::dict<size_t, double> ddc_freq; + uhd::dict<size_t, size_t> duc_interp; + uhd::dict<size_t, double> duc_freq; + std::vector<size_t> decim_and_interp_rates; + uhd::dict<size_t, bool> continuous_streaming; +}; + +void usrp2_mboard_impl::dsp_init(void){ + //create new dsp impl + _dsp_impl = UHD_PIMPL_MAKE(dsp_impl, ()); + + //load the allowed decim/interp rates + //range(4, 128+1, 1) + range(130, 256+1, 2) + range(260, 512+1, 4) + for (size_t i = 4; i <= 128; i+=1){ + _dsp_impl->decim_and_interp_rates.push_back(i); + } + for (size_t i = 130; i <= 256; i+=2){ + _dsp_impl->decim_and_interp_rates.push_back(i); + } + for (size_t i = 260; i <= 512; i+=4){ + _dsp_impl->decim_and_interp_rates.push_back(i); + } + + //bind and initialize the rx dsps + for (size_t i = 0; i < NUM_RX_DSPS; i++){ + _rx_dsp_proxies[str(boost::format("DSP%d")%i)] = wax_obj_proxy::make( + boost::bind(&usrp2_mboard_impl::ddc_get, this, _1, _2, i), + boost::bind(&usrp2_mboard_impl::ddc_set, this, _1, _2, i) + ); + + //initial config and update + ddc_set(DSP_PROP_FREQ_SHIFT, double(0), i); + ddc_set(DSP_PROP_HOST_RATE, double(get_master_clock_freq()/16), i); + + //setup the rx control registers + _iface->poke32(_iface->regs.rx_ctrl[i].clear_overrun, 1); //reset + _iface->poke32(_iface->regs.rx_ctrl[i].nsamps_per_pkt, _device.get_max_recv_samps_per_packet()); + _iface->poke32(_iface->regs.rx_ctrl[i].nchannels, 1); + _iface->poke32(_iface->regs.rx_ctrl[i].vrt_header, 0 + | (0x1 << 28) //if data with stream id + | (0x1 << 26) //has trailer + | (0x3 << 22) //integer time other + | (0x1 << 20) //fractional time sample count + ); + _iface->poke32(_iface->regs.rx_ctrl[i].vrt_stream_id, usrp2_impl::RECV_SID); + _iface->poke32(_iface->regs.rx_ctrl[i].vrt_trailer, 0); + _iface->poke32(_iface->regs.time64_tps, size_t(get_master_clock_freq())); + } + + //bind and initialize the tx dsps + for (size_t i = 0; i < NUM_TX_DSPS; i++){ + _tx_dsp_proxies[str(boost::format("DSP%d")%i)] = wax_obj_proxy::make( + boost::bind(&usrp2_mboard_impl::duc_get, this, _1, _2, i), + boost::bind(&usrp2_mboard_impl::duc_set, this, _1, _2, i) + ); + + //initial config and update + duc_set(DSP_PROP_FREQ_SHIFT, double(0), i); + duc_set(DSP_PROP_HOST_RATE, double(get_master_clock_freq()/16), i); + + //init the tx control registers + _iface->poke32(_iface->regs.tx_ctrl_clear_state, 1); //reset + _iface->poke32(_iface->regs.tx_ctrl_num_chan, 0); //1 channel + _iface->poke32(_iface->regs.tx_ctrl_report_sid, usrp2_impl::ASYNC_SID); + _iface->poke32(_iface->regs.tx_ctrl_policy, U2_FLAG_TX_CTRL_POLICY_NEXT_PACKET); + } +} + +template <typename rate_type> +static rate_type pick_closest_rate(double exact_rate, const std::vector<rate_type> &rates){ + unsigned closest_match = rates.front(); + BOOST_FOREACH(rate_type possible_rate, rates){ + if(std::abs(exact_rate - possible_rate) < std::abs(exact_rate - closest_match)) + closest_match = possible_rate; + } + return closest_match; +} + +void usrp2_mboard_impl::issue_ddc_stream_cmd(const stream_cmd_t &stream_cmd, size_t which_dsp){ + _dsp_impl->continuous_streaming[which_dsp] = stream_cmd.stream_mode == stream_cmd_t::STREAM_MODE_START_CONTINUOUS; + _iface->poke32(_iface->regs.rx_ctrl[which_dsp].stream_cmd, dsp_type1::calc_stream_cmd_word(stream_cmd)); + _iface->poke32(_iface->regs.rx_ctrl[which_dsp].time_secs, boost::uint32_t(stream_cmd.time_spec.get_full_secs())); + _iface->poke32(_iface->regs.rx_ctrl[which_dsp].time_ticks, stream_cmd.time_spec.get_tick_count(get_master_clock_freq())); +} + +void usrp2_mboard_impl::handle_overflow(size_t which_dsp){ + if (_dsp_impl->continuous_streaming[which_dsp]){ //re-issue the stream command if already continuous + this->issue_ddc_stream_cmd(stream_cmd_t::STREAM_MODE_START_CONTINUOUS, which_dsp); + } +} + +/*********************************************************************** + * DDC Properties + **********************************************************************/ +void usrp2_mboard_impl::ddc_get(const wax::obj &key_, wax::obj &val, size_t which_dsp){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + case DSP_PROP_NAME: + val = str(boost::format("%s ddc%d") % _iface->get_cname() % which_dsp); + return; + + case DSP_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case DSP_PROP_FREQ_SHIFT: + val = _dsp_impl->ddc_freq[which_dsp]; + return; + + case DSP_PROP_CODEC_RATE: + val = get_master_clock_freq(); + return; + + case DSP_PROP_HOST_RATE: + val = get_master_clock_freq()/_dsp_impl->ddc_decim[which_dsp]; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void usrp2_mboard_impl::ddc_set(const wax::obj &key_, const wax::obj &val, size_t which_dsp){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + + case DSP_PROP_STREAM_CMD: + issue_ddc_stream_cmd(val.as<stream_cmd_t>(), which_dsp); + return; + + case DSP_PROP_FREQ_SHIFT:{ + double new_freq = val.as<double>(); + _iface->poke32(_iface->regs.dsp_rx[which_dsp].freq, + dsp_type1::calc_cordic_word_and_update(new_freq, get_master_clock_freq()) + ); + _dsp_impl->ddc_freq[which_dsp] = new_freq; //shadow + } + return; + + case DSP_PROP_HOST_RATE:{ + double extact_rate = get_master_clock_freq()/val.as<double>(); + _dsp_impl->ddc_decim[which_dsp] = pick_closest_rate(extact_rate, _dsp_impl->decim_and_interp_rates); + + //set the decimation + _iface->poke32(_iface->regs.dsp_rx[which_dsp].decim_rate, dsp_type1::calc_cic_filter_word(_dsp_impl->ddc_decim[which_dsp])); + + //set the scaling + static const boost::int16_t default_rx_scale_iq = 1024; + _iface->poke32(_iface->regs.dsp_rx[which_dsp].scale_iq, + dsp_type1::calc_iq_scale_word(default_rx_scale_iq, default_rx_scale_iq) + ); + } + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * DUC Properties + **********************************************************************/ +void usrp2_mboard_impl::duc_get(const wax::obj &key_, wax::obj &val, size_t which_dsp){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + case DSP_PROP_NAME: + val = str(boost::format("%s duc%d") % _iface->get_cname() % which_dsp); + return; + + case DSP_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case DSP_PROP_FREQ_SHIFT: + val = _dsp_impl->duc_freq[which_dsp]; + return; + + case DSP_PROP_CODEC_RATE: + val = get_master_clock_freq(); + return; + + case DSP_PROP_HOST_RATE: + val = get_master_clock_freq()/_dsp_impl->duc_interp[which_dsp]; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void usrp2_mboard_impl::duc_set(const wax::obj &key_, const wax::obj &val, size_t which_dsp){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + + case DSP_PROP_FREQ_SHIFT:{ + const double codec_rate = get_master_clock_freq(); + double new_freq = val.as<double>(); + + //calculate the DAC shift (multiples of rate) + const int sign = boost::math::sign(new_freq); + const int zone = std::min(boost::math::iround(new_freq/codec_rate), 2); + const double dac_shift = sign*zone*codec_rate; + new_freq -= dac_shift; //update FPGA DSP target freq + + //set the DAC shift (modulation mode) + if (zone == 0) _codec_ctrl->set_tx_mod_mode(0); //no shift + else _codec_ctrl->set_tx_mod_mode(sign*4/zone); //DAC interp = 4 + + _iface->poke32(_iface->regs.dsp_tx_freq, + dsp_type1::calc_cordic_word_and_update(new_freq, codec_rate) + ); + _dsp_impl->duc_freq[which_dsp] = new_freq + dac_shift; //shadow + } + return; + + case DSP_PROP_HOST_RATE:{ + double extact_rate = get_master_clock_freq()/val.as<double>(); + _dsp_impl->duc_interp[which_dsp] = pick_closest_rate(extact_rate, _dsp_impl->decim_and_interp_rates); + + //set the interpolation + _iface->poke32(_iface->regs.dsp_tx_interp_rate, dsp_type1::calc_cic_filter_word(_dsp_impl->duc_interp[which_dsp])); + + //set the scaling + _iface->poke32(_iface->regs.dsp_tx_scale_iq, dsp_type1::calc_iq_scale_word(_dsp_impl->duc_interp[which_dsp])); + } + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/usrp2/fw_common.h b/host/lib/usrp/usrp2/fw_common.h new file mode 100644 index 000000000..9b49610d9 --- /dev/null +++ b/host/lib/usrp/usrp2/fw_common.h @@ -0,0 +1,149 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP2_FW_COMMON_H +#define INCLUDED_USRP2_FW_COMMON_H + +#include <stdint.h> + +/*! + * Structs and constants for usrp2 communication. + * This header is shared by the firmware and host code. + * Therefore, this header may only contain valid C code. + */ +#ifdef __cplusplus +extern "C" { +#endif + +//fpga and firmware compatibility numbers +#define USRP2_FPGA_COMPAT_NUM 6 +#define USRP2_FW_COMPAT_NUM 10 + +//used to differentiate control packets over data port +#define USRP2_INVALID_VRT_HEADER 0 + +// udp ports for the usrp2 communication +// Dynamic and/or private ports: 49152-65535 +#define USRP2_UDP_CTRL_PORT 49152 +//#define USRP2_UDP_UPDATE_PORT 49154 +#define USRP2_UDP_DSP0_PORT 49156 +#define USRP2_UDP_ERR0_PORT 49157 +#define USRP2_UDP_DSP1_PORT 49158 + +//////////////////////////////////////////////////////////////////////// +// I2C addresses +//////////////////////////////////////////////////////////////////////// +#define USRP2_I2C_DEV_EEPROM 0x50 // 24LC02[45]: 7-bits 1010xxx +#define USRP2_I2C_ADDR_MBOARD (USRP2_I2C_DEV_EEPROM | 0x0) +#define USRP2_I2C_ADDR_TX_DB (USRP2_I2C_DEV_EEPROM | 0x4) +#define USRP2_I2C_ADDR_RX_DB (USRP2_I2C_DEV_EEPROM | 0x5) + +//////////////////////////////////////////////////////////////////////// +// EEPROM Layout +//////////////////////////////////////////////////////////////////////// +#define USRP2_EE_MBOARD_REV 0x00 //2 bytes, little-endian (historic, don't blame me) +#define USRP2_EE_MBOARD_MAC_ADDR 0x02 //6 bytes +#define USRP2_EE_MBOARD_IP_ADDR 0x0C //uint32, big-endian +#define USRP2_EE_MBOARD_BOOTLOADER_FLAGS 0xF7 + +typedef enum{ + USRP2_CTRL_ID_HUH_WHAT = ' ', + //USRP2_CTRL_ID_FOR_SURE, //TODO error condition enums + //USRP2_CTRL_ID_SUX_MAN, + + USRP2_CTRL_ID_WAZZUP_BRO = 'a', + USRP2_CTRL_ID_WAZZUP_DUDE = 'A', + + USRP2_CTRL_ID_TRANSACT_ME_SOME_SPI_BRO = 's', + USRP2_CTRL_ID_OMG_TRANSACTED_SPI_DUDE = 'S', + + USRP2_CTRL_ID_DO_AN_I2C_READ_FOR_ME_BRO = 'i', + USRP2_CTRL_ID_HERES_THE_I2C_DATA_DUDE = 'I', + + USRP2_CTRL_ID_WRITE_THESE_I2C_VALUES_BRO = 'h', + USRP2_CTRL_ID_COOL_IM_DONE_I2C_WRITE_DUDE = 'H', + + USRP2_CTRL_ID_POKE_THIS_REGISTER_FOR_ME_BRO = 'p', + USRP2_CTRL_ID_OMG_POKED_REGISTER_SO_BAD_DUDE = 'P', + + USRP2_CTRL_ID_PEEK_AT_THIS_REGISTER_FOR_ME_BRO = 'r', + USRP2_CTRL_ID_WOAH_I_DEFINITELY_PEEKED_IT_DUDE = 'R', + + USRP2_CTRL_ID_HEY_WRITE_THIS_UART_FOR_ME_BRO = 'u', + USRP2_CTRL_ID_MAN_I_TOTALLY_WROTE_THAT_UART_DUDE = 'U', + + USRP2_CTRL_ID_SO_LIKE_CAN_YOU_READ_THIS_UART_BRO = 'v', + USRP2_CTRL_ID_I_HELLA_READ_THAT_UART_DUDE = 'V', + + USRP2_CTRL_ID_HOLLER_AT_ME_BRO = 'l', + USRP2_CTRL_ID_HOLLER_BACK_DUDE = 'L', + + USRP2_CTRL_ID_PEACE_OUT = '~' + +} usrp2_ctrl_id_t; + +typedef enum{ + USRP2_DIR_RX = 'r', + USRP2_DIR_TX = 't' +} usrp2_dir_which_t; + +typedef enum{ + USRP2_CLK_EDGE_RISE = 'r', + USRP2_CLK_EDGE_FALL = 'f' +} usrp2_clk_edge_t; + +typedef struct{ + uint32_t proto_ver; + uint32_t id; + uint32_t seq; + union{ + uint32_t ip_addr; + struct { + uint32_t dev; + uint32_t data; + uint8_t miso_edge; + uint8_t mosi_edge; + uint8_t num_bits; + uint8_t readback; + } spi_args; + struct { + uint8_t addr; + uint8_t bytes; + uint8_t data[20]; + } i2c_args; + struct { + uint32_t addr; + uint32_t data; + uint32_t _pad[2]; + uint8_t num_bytes; //1, 2, 4 + } poke_args; + struct { + uint8_t dev; + uint8_t bytes; + uint8_t data[20]; + } uart_args; + struct { + uint32_t len; + } echo_args; + } data; +} usrp2_ctrl_data_t; + +#ifdef __cplusplus +} +#endif + +#endif /* INCLUDED_USRP2_FW_COMMON_H */ diff --git a/host/lib/usrp/usrp2/io_impl.cpp b/host/lib/usrp/usrp2/io_impl.cpp new file mode 100644 index 000000000..340e9d155 --- /dev/null +++ b/host/lib/usrp/usrp2/io_impl.cpp @@ -0,0 +1,529 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "../../transport/vrt_packet_handler.hpp" +#include "usrp2_impl.hpp" +#include "usrp2_regs.hpp" +#include <uhd/exception.hpp> +#include <uhd/usrp/mboard_props.hpp> +#include <uhd/utils/byteswap.hpp> +#include <uhd/utils/thread_priority.hpp> +#include <uhd/transport/bounded_buffer.hpp> +#include <boost/format.hpp> +#include <boost/bind.hpp> +#include <boost/thread.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; +namespace asio = boost::asio; +namespace pt = boost::posix_time; + +/*********************************************************************** + * helpers + **********************************************************************/ +static UHD_INLINE pt::time_duration to_time_dur(double timeout){ + return pt::microseconds(long(timeout*1e6)); +} + +static UHD_INLINE double from_time_dur(const pt::time_duration &time_dur){ + return 1e-6*time_dur.total_microseconds(); +} + +/*********************************************************************** + * constants + **********************************************************************/ +static const int underflow_flags = 0 + | async_metadata_t::EVENT_CODE_UNDERFLOW + | async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET +; + +static const size_t vrt_send_header_offset_words32 = 1; + +/*********************************************************************** + * flow control monitor for a single tx channel + * - the pirate thread calls update + * - the get send buffer calls check + **********************************************************************/ +class flow_control_monitor{ +public: + typedef boost::uint32_t seq_type; + typedef boost::shared_ptr<flow_control_monitor> sptr; + + /*! + * Make a new flow control monitor. + * \param max_seqs_out num seqs before throttling + */ + flow_control_monitor(seq_type max_seqs_out){ + _last_seq_out = 0; + _last_seq_ack = 0; + _max_seqs_out = max_seqs_out; + _ready_fcn = boost::bind(&flow_control_monitor::ready, this); + } + + /*! + * Check the flow control condition. + * \param seq the sequence to go out + * \param timeout the timeout in seconds + * \return false on timeout + */ + UHD_INLINE bool check_fc_condition(seq_type seq, double timeout){ + boost::unique_lock<boost::mutex> lock(_fc_mutex); + _last_seq_out = seq; + if (this->ready()) return true; + boost::this_thread::disable_interruption di; //disable because the wait can throw + return _fc_cond.timed_wait(lock, to_time_dur(timeout), _ready_fcn); + } + + /*! + * Update the flow control condition. + * \param seq the last sequence number to be ACK'd + */ + UHD_INLINE void update_fc_condition(seq_type seq){ + boost::unique_lock<boost::mutex> lock(_fc_mutex); + _last_seq_ack = seq; + lock.unlock(); + _fc_cond.notify_one(); + } + +private: + bool ready(void){ + return seq_type(_last_seq_out -_last_seq_ack) < _max_seqs_out; + } + + boost::mutex _fc_mutex; + boost::condition _fc_cond; + seq_type _last_seq_out, _last_seq_ack, _max_seqs_out; + boost::function<bool(void)> _ready_fcn; +}; + +/*********************************************************************** + * Alignment indexes class: keeps track of indexes + **********************************************************************/ +class alignment_indexes{ +public: + alignment_indexes(void){_indexes = 0;} + void reset(size_t len){_indexes = (1 << len) - 1;} + size_t front(void){ //TODO replace with look-up table + size_t index = 0; + while ((_indexes & (1 << index)) == 0) index++; + return index; + } + void remove(size_t index){_indexes &= ~(1 << index);} + bool empty(void){return _indexes == 0;} +private: size_t _indexes; +}; + +/*********************************************************************** + * io impl details (internal to this file) + * - pirate crew + * - alignment buffer + * - thread loop + * - vrt packet handler states + **********************************************************************/ +struct usrp2_impl::io_impl{ + + io_impl(std::vector<zero_copy_if::sptr> &dsp_xports): + dsp_xports(dsp_xports), //the assumption is that all data transports should be identical + get_recv_buffs_fcn(boost::bind(&usrp2_impl::io_impl::get_recv_buffs, this, _1)), + get_send_buffs_fcn(boost::bind(&usrp2_impl::io_impl::get_send_buffs, this, _1)), + async_msg_fifo(100/*messages deep*/) + { + for (size_t i = 0; i < dsp_xports.size(); i++){ + fc_mons.push_back(flow_control_monitor::sptr(new flow_control_monitor( + usrp2_impl::sram_bytes/dsp_xports.front()->get_send_frame_size() + )));; + } + + //init empty packet infos + vrt::if_packet_info_t packet_info = vrt::if_packet_info_t(); + packet_info.packet_count = 0xf; + packet_info.has_tsi = true; + packet_info.tsi = 0; + packet_info.has_tsf = true; + packet_info.tsf = 0; + prev_infos.resize(dsp_xports.size(), packet_info); + } + + ~io_impl(void){ + recv_pirate_crew_raiding = false; + recv_pirate_crew.interrupt_all(); + recv_pirate_crew.join_all(); + } + + bool get_send_buffs(vrt_packet_handler::managed_send_buffs_t &buffs){ + UHD_ASSERT_THROW(send_map.size() == buffs.size()); + + //calculate the flow control word + const boost::uint32_t fc_word32 = packet_handler_send_state.next_packet_seq; + + //grab a managed buffer for each index + for (size_t i = 0; i < buffs.size(); i++){ + if (not fc_mons[send_map[i]]->check_fc_condition(fc_word32, send_timeout)) return false; + buffs[i] = dsp_xports[send_map[i]]->get_send_buff(send_timeout); + if (not buffs[i].get()) return false; + buffs[i]->cast<boost::uint32_t *>()[0] = uhd::htonx(fc_word32); + } + return true; + } + + alignment_indexes indexes_to_do; //used in alignment logic + time_spec_t expected_time; //used in alignment logic + bool get_recv_buffs(vrt_packet_handler::managed_recv_buffs_t &buffs); + + std::vector<zero_copy_if::sptr> &dsp_xports; + + //mappings from channel index to dsp xport + std::vector<size_t> send_map, recv_map; + + //timeouts set on calls to recv/send (passed into get buffs methods) + double recv_timeout, send_timeout; + + //bound callbacks for get buffs (bound once here, not in fast-path) + vrt_packet_handler::get_recv_buffs_t get_recv_buffs_fcn; + vrt_packet_handler::get_send_buffs_t get_send_buffs_fcn; + + //previous state for each buffer + std::vector<vrt::if_packet_info_t> prev_infos; + + //flow control monitors + std::vector<flow_control_monitor::sptr> fc_mons; + + //state management for the vrt packet handler code + vrt_packet_handler::recv_state packet_handler_recv_state; + vrt_packet_handler::send_state packet_handler_send_state; + + //methods and variables for the pirate crew + void recv_pirate_loop(usrp2_mboard_impl::sptr, zero_copy_if::sptr, size_t); + boost::thread_group recv_pirate_crew; + bool recv_pirate_crew_raiding; + bounded_buffer<async_metadata_t> async_msg_fifo; + boost::mutex spawn_mutex; +}; + +/*********************************************************************** + * Receive Pirate Loop + * - while raiding, loot for message packet + * - update flow control condition count + * - put async message packets into queue + **********************************************************************/ +void usrp2_impl::io_impl::recv_pirate_loop( + usrp2_mboard_impl::sptr mboard, zero_copy_if::sptr err_xport, size_t index +){ + set_thread_priority_safe(); + recv_pirate_crew_raiding = true; + + spawn_mutex.unlock(); + + //store a reference to the flow control monitor (offset by max dsps) + flow_control_monitor &fc_mon = *(this->fc_mons[index*usrp2_mboard_impl::MAX_NUM_DSPS]); + + while(recv_pirate_crew_raiding){ + managed_recv_buffer::sptr buff = err_xport->get_recv_buff(); + if (not buff.get()) continue; //ignore timeout/error buffers + + try{ + //extract the vrt header packet info + vrt::if_packet_info_t if_packet_info; + if_packet_info.num_packet_words32 = buff->size()/sizeof(boost::uint32_t); + const boost::uint32_t *vrt_hdr = buff->cast<const boost::uint32_t *>(); + vrt::if_hdr_unpack_be(vrt_hdr, if_packet_info); + + //handle a tx async report message + if (if_packet_info.sid == usrp2_impl::ASYNC_SID and if_packet_info.packet_type != vrt::if_packet_info_t::PACKET_TYPE_DATA){ + + //fill in the async metadata + async_metadata_t metadata; + metadata.channel = index; + metadata.has_time_spec = if_packet_info.has_tsi and if_packet_info.has_tsf; + metadata.time_spec = time_spec_t( + time_t(if_packet_info.tsi), size_t(if_packet_info.tsf), mboard->get_master_clock_freq() + ); + metadata.event_code = vrt_packet_handler::get_context_code<async_metadata_t::event_code_t>(vrt_hdr, if_packet_info); + + //catch the flow control packets and react + if (metadata.event_code == 0){ + boost::uint32_t fc_word32 = (vrt_hdr + if_packet_info.num_header_words32)[1]; + fc_mon.update_fc_condition(uhd::ntohx(fc_word32)); + continue; + } + + //print the famous U, and push the metadata into the message queue + if (metadata.event_code & underflow_flags) std::cerr << "U" << std::flush; + //else std::cout << "metadata.event_code " << metadata.event_code << std::endl; + async_msg_fifo.push_with_pop_on_full(metadata); + } + else{ + //TODO unknown received packet, may want to print error... + } + }catch(const std::exception &e){ + std::cerr << "Error (usrp2 recv pirate loop): " << e.what() << std::endl; + } + } +} + +/*********************************************************************** + * Helper Functions + **********************************************************************/ +void usrp2_impl::io_init(void){ + + //create new io impl + _io_impl = UHD_PIMPL_MAKE(io_impl, (dsp_xports)); + + //create a new pirate thread for each zc if (yarr!!) + for (size_t i = 0; i < _mboards.size(); i++){ + //lock the unlocked mutex (non-blocking) + _io_impl->spawn_mutex.lock(); + //spawn a new pirate to plunder the recv booty + _io_impl->recv_pirate_crew.create_thread(boost::bind( + &usrp2_impl::io_impl::recv_pirate_loop, + _io_impl.get(), _mboards.at(i), err_xports.at(i), i + )); + //block here until the spawned thread unlocks + _io_impl->spawn_mutex.lock(); + //exit loop iteration in an unlocked condition + _io_impl->spawn_mutex.unlock(); + } + + //update mapping here since it didnt b4 when io init not called first + update_xport_channel_mapping(); +} + +void usrp2_impl::update_xport_channel_mapping(void){ + if (_io_impl.get() == NULL) return; //not inited yet + + _io_impl->recv_map.clear(); + _io_impl->send_map.clear(); + + for (size_t i = 0; i < _mboards.size(); i++){ + + subdev_spec_t rx_subdev_spec = _mboards[i]->get_link()[MBOARD_PROP_RX_SUBDEV_SPEC].as<subdev_spec_t>(); + for (size_t j = 0; j < rx_subdev_spec.size(); j++){ + _io_impl->recv_map.push_back(i*usrp2_mboard_impl::MAX_NUM_DSPS+j); + //std::cout << "recv_map.back() " << _io_impl->recv_map.back() << std::endl; + } + + subdev_spec_t tx_subdev_spec = _mboards[i]->get_link()[MBOARD_PROP_TX_SUBDEV_SPEC].as<subdev_spec_t>(); + for (size_t j = 0; j < tx_subdev_spec.size(); j++){ + _io_impl->send_map.push_back(i*usrp2_mboard_impl::MAX_NUM_DSPS+j); + //std::cout << "send_map.back() " << _io_impl->send_map.back() << std::endl; + } + + } + + _io_impl->packet_handler_recv_state = vrt_packet_handler::recv_state(_io_impl->recv_map.size()); + _io_impl->packet_handler_send_state = vrt_packet_handler::send_state(_io_impl->send_map.size()); +} + +/*********************************************************************** + * Async Data + **********************************************************************/ +bool usrp2_impl::recv_async_msg( + async_metadata_t &async_metadata, double timeout +){ + boost::this_thread::disable_interruption di; //disable because the wait can throw + return _io_impl->async_msg_fifo.pop_with_timed_wait(async_metadata, timeout); +} + +/*********************************************************************** + * Send Data + **********************************************************************/ +size_t usrp2_impl::get_max_send_samps_per_packet(void) const{ + static const size_t hdr_size = 0 + + vrt::max_if_hdr_words32*sizeof(boost::uint32_t) + + vrt_send_header_offset_words32*sizeof(boost::uint32_t) + - sizeof(vrt::if_packet_info_t().cid) //no class id ever used + ; + const size_t bpp = dsp_xports.front()->get_send_frame_size() - hdr_size; + return bpp/_tx_otw_type.get_sample_size(); +} + +size_t usrp2_impl::send( + const send_buffs_type &buffs, size_t num_samps, + const tx_metadata_t &metadata, const io_type_t &io_type, + send_mode_t send_mode, double timeout +){ + _io_impl->send_timeout = timeout; + return vrt_packet_handler::send( + _io_impl->packet_handler_send_state, //last state of the send handler + buffs, num_samps, //buffer to fill + metadata, send_mode, //samples metadata + io_type, _tx_otw_type, //input and output types to convert + _mboards.front()->get_master_clock_freq(), //master clock tick rate + uhd::transport::vrt::if_hdr_pack_be, + _io_impl->get_send_buffs_fcn, + get_max_send_samps_per_packet(), + vrt_send_header_offset_words32 + ); +} + +/*********************************************************************** + * Alignment logic on receive + **********************************************************************/ +static UHD_INLINE time_spec_t extract_time_spec( + const vrt::if_packet_info_t &packet_info +){ + return time_spec_t( //assumes has_tsi and has_tsf are true + time_t(packet_info.tsi), size_t(packet_info.tsf), + 100e6 //tick rate does not have to be correct for comparison purposes + ); +} + +static UHD_INLINE void extract_packet_info( + managed_recv_buffer::sptr &buff, + vrt::if_packet_info_t &prev_info, + time_spec_t &time, bool &clear, bool &msg +){ + //extract packet info + vrt::if_packet_info_t next_info; + next_info.num_packet_words32 = buff->size()/sizeof(boost::uint32_t); + vrt::if_hdr_unpack_be(buff->cast<const boost::uint32_t *>(), next_info); + + //handle the packet count / sequence number + if ((prev_info.packet_count+1)%16 != next_info.packet_count){ + std::cerr << "O" << std::flush; //report overflow (drops in the kernel) + } + + time = extract_time_spec(next_info); + clear = extract_time_spec(prev_info) > time; + msg = next_info.packet_type != vrt::if_packet_info_t::PACKET_TYPE_DATA; + prev_info = next_info; +} + +static UHD_INLINE bool handle_msg_packet( + vrt_packet_handler::managed_recv_buffs_t &buffs, size_t index +){ + for (size_t i = 0; i < buffs.size(); i++){ + if (i == index) continue; + buffs[i].reset(); //set NULL + } + return true; +} + +UHD_INLINE bool usrp2_impl::io_impl::get_recv_buffs( + vrt_packet_handler::managed_recv_buffs_t &buffs +){ + if (buffs.size() == 1){ + buffs[0] = dsp_xports[recv_map[0]]->get_recv_buff(recv_timeout); + if (buffs[0].get() == NULL) return false; + bool clear, msg; time_spec_t time; //unused variables + //call extract_packet_info to handle printing the overflows + extract_packet_info(buffs[0], this->prev_infos[recv_map[0]], time, clear, msg); + return true; + } + //-------------------- begin alignment logic ---------------------// + UHD_ASSERT_THROW(recv_map.size() == buffs.size()); + boost::system_time exit_time = boost::get_system_time() + to_time_dur(recv_timeout); + managed_recv_buffer::sptr buff_tmp; + bool clear, msg; + size_t index; + + //If we did not enter this routine with an empty indexes set, + //jump to after the clear so we can preserve the previous state. + //This saves buffers from being lost when using non-blocking recv. + if (not indexes_to_do.empty()) goto skip_pop_initial; + + //respond to a clear by starting from scratch + got_clear: + indexes_to_do.reset(buffs.size()); + clear = false; + + //do an initial pop to load an initial sequence id + index = indexes_to_do.front(); + buff_tmp = dsp_xports[recv_map[index]]->get_recv_buff(from_time_dur(exit_time - boost::get_system_time())); + if (buff_tmp.get() == NULL) return false; + extract_packet_info(buff_tmp, this->prev_infos[recv_map[index]], expected_time, clear, msg); + if (clear) goto got_clear; + buffs[index] = buff_tmp; + if (msg) return handle_msg_packet(buffs, index); + indexes_to_do.remove(index); + skip_pop_initial: + + //get an aligned set of elements from the buffers: + while(not indexes_to_do.empty()){ + + //pop an element off for this index + index = indexes_to_do.front(); + buff_tmp = dsp_xports[recv_map[index]]->get_recv_buff(from_time_dur(exit_time - boost::get_system_time())); + if (buff_tmp.get() == NULL) return false; + time_spec_t this_time; + extract_packet_info(buff_tmp, this->prev_infos[recv_map[index]], this_time, clear, msg); + if (clear) goto got_clear; + buffs[index] = buff_tmp; + if (msg) return handle_msg_packet(buffs, index); + + //if the sequence id matches: + // remove this index from the list and continue + if (this_time == expected_time){ + indexes_to_do.remove(index); + } + + //if the sequence id is newer: + // use the new expected time for comparison + // add all other indexes back into the list + else if (this_time > expected_time){ + expected_time = this_time; + indexes_to_do.reset(buffs.size()); + indexes_to_do.remove(index); + } + + //if the sequence id is older: + // continue with the same index to try again + //else if (this_time < expected_time)... + + } + return true; + //-------------------- end alignment logic -----------------------// +} + +/*********************************************************************** + * Receive Data + **********************************************************************/ +size_t usrp2_impl::get_max_recv_samps_per_packet(void) const{ + static const size_t hdr_size = 0 + + vrt::max_if_hdr_words32*sizeof(boost::uint32_t) + + sizeof(vrt::if_packet_info_t().tlr) //forced to have trailer + - sizeof(vrt::if_packet_info_t().cid) //no class id ever used + ; + const size_t bpp = dsp_xports.front()->get_recv_frame_size() - hdr_size; + return bpp/_rx_otw_type.get_sample_size(); +} + +void usrp2_impl::handle_overflow(size_t chan){ + std::cerr << "O" << std::flush; + ldiv_t indexes = ldiv(chan, usrp2_mboard_impl::NUM_RX_DSPS); + _mboards.at(indexes.quot)->handle_overflow(indexes.rem); +} + +size_t usrp2_impl::recv( + const recv_buffs_type &buffs, size_t num_samps, + rx_metadata_t &metadata, const io_type_t &io_type, + recv_mode_t recv_mode, double timeout +){ + _io_impl->recv_timeout = timeout; + return vrt_packet_handler::recv( + _io_impl->packet_handler_recv_state, //last state of the recv handler + buffs, num_samps, //buffer to fill + metadata, recv_mode, //samples metadata + io_type, _rx_otw_type, //input and output types to convert + _mboards.front()->get_master_clock_freq(), //master clock tick rate + uhd::transport::vrt::if_hdr_unpack_be, + _io_impl->get_recv_buffs_fcn, + boost::bind(&usrp2_impl::handle_overflow, this, _1) + ); +} diff --git a/host/lib/usrp/usrp2/mboard_impl.cpp b/host/lib/usrp/usrp2/mboard_impl.cpp new file mode 100644 index 000000000..40fc5098b --- /dev/null +++ b/host/lib/usrp/usrp2/mboard_impl.cpp @@ -0,0 +1,419 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp2_impl.hpp" +#include "usrp2_regs.hpp" +#include "fw_common.h" +#include <uhd/utils/safe_call.hpp> +#include <uhd/exception.hpp> +#include <uhd/usrp/gps_ctrl.hpp> +#include <uhd/usrp/misc_utils.hpp> +#include <uhd/usrp/dsp_utils.hpp> +#include <uhd/usrp/mboard_props.hpp> +#include <uhd/utils/byteswap.hpp> +#include <uhd/utils/algorithm.hpp> +#include <boost/bind.hpp> +#include <iostream> + +static const double mimo_clock_delay_usrp2_rev4 = 4.18e-9; +static const double mimo_clock_delay_usrp_n2xx = 3.55e-9; +static const size_t mimo_clock_sync_delay_cycles = 137; + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; + +/*********************************************************************** + * Helpers + **********************************************************************/ +static void init_xport(zero_copy_if::sptr xport){ + //Send a small data packet so the usrp2 knows the udp source port. + //This setup must happen before further initialization occurs + //or the async update packets will cause ICMP destination unreachable. + static const boost::uint32_t data[2] = { + uhd::htonx(boost::uint32_t(0 /* don't care seq num */)), + uhd::htonx(boost::uint32_t(USRP2_INVALID_VRT_HEADER)) + }; + + transport::managed_send_buffer::sptr send_buff = xport->get_send_buff(); + std::memcpy(send_buff->cast<void*>(), &data, sizeof(data)); + send_buff->commit(sizeof(data)); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +usrp2_mboard_impl::usrp2_mboard_impl( + const device_addr_t &device_addr, + size_t index, usrp2_impl &device +): + _index(index), _device(device), + _iface(usrp2_iface::make(udp_simple::make_connected( + device_addr["addr"], BOOST_STRINGIZE(USRP2_UDP_CTRL_PORT) + ))) +{ + //construct transports for dsp and async errors + std::cout << "Making transport for DSP0..." << std::endl; + device.dsp_xports.push_back(udp_zero_copy::make( + device_addr["addr"], BOOST_STRINGIZE(USRP2_UDP_DSP0_PORT), device_addr + )); + init_xport(device.dsp_xports.back()); + + std::cout << "Making transport for DSP1..." << std::endl; + device.dsp_xports.push_back(udp_zero_copy::make( + device_addr["addr"], BOOST_STRINGIZE(USRP2_UDP_DSP1_PORT), device_addr + )); + init_xport(device.dsp_xports.back()); + + std::cout << "Making transport for ERR0..." << std::endl; + device.err_xports.push_back(udp_zero_copy::make( + device_addr["addr"], BOOST_STRINGIZE(USRP2_UDP_ERR0_PORT), device_addr_t() + )); + init_xport(device.err_xports.back()); + + //contruct the interfaces to mboard perifs + _clock_ctrl = usrp2_clock_ctrl::make(_iface); + _codec_ctrl = usrp2_codec_ctrl::make(_iface); +// _gps_ctrl = gps_ctrl::make( +// _iface->get_gps_write_fn(), +// _iface->get_gps_read_fn()); + + //if(_gps_ctrl->gps_detected()) std::cout << "GPS time: " << _gps_ctrl->get_time() << std::endl; + + //init the dsp stuff (before setting update packets) + dsp_init(); + + //setting the cycles per update (disabled by default) + const double ups_per_sec = device_addr.cast<double>("ups_per_sec", 0.0); + if (ups_per_sec > 0.0){ + const size_t cycles_per_up = size_t(_clock_ctrl->get_master_clock_rate()/ups_per_sec); + _iface->poke32(_iface->regs.tx_ctrl_cycles_per_up, U2_FLAG_TX_CTRL_UP_ENB | cycles_per_up); + } + + //setting the packets per update (enabled by default) + size_t send_frame_size = device.dsp_xports[0]->get_send_frame_size(); + const double ups_per_fifo = device_addr.cast<double>("ups_per_fifo", 8.0); + if (ups_per_fifo > 0.0){ + const size_t packets_per_up = size_t(usrp2_impl::sram_bytes/ups_per_fifo/send_frame_size); + _iface->poke32(_iface->regs.tx_ctrl_packets_per_up, U2_FLAG_TX_CTRL_UP_ENB | packets_per_up); + } + + //initialize the clock configuration + if (device_addr.has_key("mimo_mode")){ + if (device_addr["mimo_mode"] == "master"){ + _mimo_clocking_mode_is_master = true; + } + else if (device_addr["mimo_mode"] == "slave"){ + _mimo_clocking_mode_is_master = false; + } + else throw uhd::value_error( + "mimo_mode must be set to master or slave" + ); + } + else { + _mimo_clocking_mode_is_master = (_iface->peek32(_iface->regs.status) & (1 << 8)) != 0; + } + std::cout << boost::format("mboard%d MIMO %s") % _index % + (_mimo_clocking_mode_is_master?"master":"slave") << std::endl; + + //init the clock config + _clock_config = clock_config_t::internal(); + update_clock_config(); + + //init the codec before the dboard + codec_init(); + + //init the tx and rx dboards (do last) + dboard_init(); + + //set default subdev specs + (*this)[MBOARD_PROP_RX_SUBDEV_SPEC] = subdev_spec_t(); + (*this)[MBOARD_PROP_TX_SUBDEV_SPEC] = subdev_spec_t(); + + //------------------------------------------------------------------ + //This is a hack/fix for the lingering packet problem. + stream_cmd_t stream_cmd(stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); + for (size_t i = 0; i < NUM_RX_DSPS; i++){ + size_t index = device.dsp_xports.size() - NUM_RX_DSPS + i; + stream_cmd.num_samps = 1; + this->issue_ddc_stream_cmd(stream_cmd, i); + device.dsp_xports.at(index)->get_recv_buff(0.01).get(); //recv with timeout for lingering + device.dsp_xports.at(index)->get_recv_buff(0.01).get(); //recv with timeout for expected + _iface->poke32(_iface->regs.rx_ctrl[i].clear_overrun, 1); //resets sequence + } + //------------------------------------------------------------------ +} + +usrp2_mboard_impl::~usrp2_mboard_impl(void){ + //Safely destruct all RAII objects in an mboard. + //This prevents the mboard deconstructor from throwing, + //which allows the device to be safely deconstructed. + UHD_SAFE_CALL(_iface->poke32(_iface->regs.tx_ctrl_cycles_per_up, 0);) + UHD_SAFE_CALL(_iface->poke32(_iface->regs.tx_ctrl_packets_per_up, 0);) + UHD_SAFE_CALL(_dboard_manager.reset();) + UHD_SAFE_CALL(_dboard_iface.reset();) + UHD_SAFE_CALL(_codec_ctrl.reset();) + UHD_SAFE_CALL(_clock_ctrl.reset();) + UHD_SAFE_CALL(_gps_ctrl.reset();) +} + +/*********************************************************************** + * Helper Methods + **********************************************************************/ +void usrp2_mboard_impl::update_clock_config(void){ + boost::uint32_t pps_flags = 0; + + //translate pps source enums + switch(_clock_config.pps_source){ + case clock_config_t::PPS_SMA: pps_flags |= U2_FLAG_TIME64_PPS_SMA; break; + default: throw uhd::value_error("unhandled clock configuration pps source"); + } + + //translate pps polarity enums + switch(_clock_config.pps_polarity){ + case clock_config_t::PPS_POS: pps_flags |= U2_FLAG_TIME64_PPS_POSEDGE; break; + case clock_config_t::PPS_NEG: pps_flags |= U2_FLAG_TIME64_PPS_NEGEDGE; break; + default: throw uhd::value_error("unhandled clock configuration pps polarity"); + } + + //set the pps flags + _iface->poke32(_iface->regs.time64_flags, pps_flags); + + //clock source ref 10mhz + switch(_iface->get_rev()){ + case usrp2_iface::USRP_N200: + case usrp2_iface::USRP_N210: + switch(_clock_config.ref_source){ + case clock_config_t::REF_INT : _iface->poke32(_iface->regs.misc_ctrl_clock, 0x12); break; + case clock_config_t::REF_SMA : _iface->poke32(_iface->regs.misc_ctrl_clock, 0x1C); break; + default: throw uhd::value_error("unhandled clock configuration reference source"); + } + _clock_ctrl->enable_external_ref(true); //USRP2P has an internal 10MHz TCXO + break; + + case usrp2_iface::USRP2_REV3: + case usrp2_iface::USRP2_REV4: + switch(_clock_config.ref_source){ + case clock_config_t::REF_INT : _iface->poke32(_iface->regs.misc_ctrl_clock, 0x10); break; + case clock_config_t::REF_SMA : _iface->poke32(_iface->regs.misc_ctrl_clock, 0x1C); break; + default: throw uhd::value_error("unhandled clock configuration reference source"); + } + _clock_ctrl->enable_external_ref(_clock_config.ref_source != clock_config_t::REF_INT); + break; + + case usrp2_iface::USRP_NXXX: break; + } + + //Handle the serdes clocking based on master/slave mode: + // - Masters always drive the clock over serdes. + // - Slaves always lock to this serdes clock. + // - Slaves lock their time over the serdes. + if (_mimo_clocking_mode_is_master){ + _clock_ctrl->enable_mimo_clock_out(true); + switch(_iface->get_rev()){ + case usrp2_iface::USRP_N200: + case usrp2_iface::USRP_N210: + _clock_ctrl->set_mimo_clock_delay(mimo_clock_delay_usrp_n2xx); + break; + + case usrp2_iface::USRP2_REV4: + _clock_ctrl->set_mimo_clock_delay(mimo_clock_delay_usrp2_rev4); + break; + + default: break; //not handled + } + _iface->poke32(_iface->regs.time64_mimo_sync, 0); + } + else{ + _iface->poke32(_iface->regs.misc_ctrl_clock, 0x15); + _clock_ctrl->enable_external_ref(true); + _clock_ctrl->enable_mimo_clock_out(false); + _iface->poke32(_iface->regs.time64_mimo_sync, + (1 << 8) | (mimo_clock_sync_delay_cycles & 0xff) + ); + } + +} + +void usrp2_mboard_impl::set_time_spec(const time_spec_t &time_spec, bool now){ + //dont set the time for slave devices, they always take from mimo cable + if (not _mimo_clocking_mode_is_master) return; + + //set the ticks + _iface->poke32(_iface->regs.time64_ticks, time_spec.get_tick_count(get_master_clock_freq())); + + //set the flags register + boost::uint32_t imm_flags = (now)? U2_FLAG_TIME64_LATCH_NOW : U2_FLAG_TIME64_LATCH_NEXT_PPS; + _iface->poke32(_iface->regs.time64_imm, imm_flags); + + //set the seconds (latches in all 3 registers) + _iface->poke32(_iface->regs.time64_secs, boost::uint32_t(time_spec.get_full_secs())); +} + +/*********************************************************************** + * MBoard Get Properties + **********************************************************************/ +static const std::string dboard_name = "0"; + +void usrp2_mboard_impl::get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + //handle the get request conditioned on the key + switch(key.as<mboard_prop_t>()){ + case MBOARD_PROP_NAME: + val = _iface->get_cname() + " mboard"; + return; + + case MBOARD_PROP_OTHERS: + val = prop_names_t(); + return; + + case MBOARD_PROP_RX_DBOARD: + UHD_ASSERT_THROW(key.name == dboard_name); + val = _rx_dboard_proxy->get_link(); + return; + + case MBOARD_PROP_RX_DBOARD_NAMES: + val = prop_names_t(1, dboard_name); + return; + + case MBOARD_PROP_TX_DBOARD: + UHD_ASSERT_THROW(key.name == dboard_name); + val = _tx_dboard_proxy->get_link(); + return; + + case MBOARD_PROP_TX_DBOARD_NAMES: + val = prop_names_t(1, dboard_name); + return; + + case MBOARD_PROP_RX_DSP: + val = _rx_dsp_proxies[key.name]->get_link(); + return; + + case MBOARD_PROP_RX_DSP_NAMES: + val = _rx_dsp_proxies.keys(); + return; + + case MBOARD_PROP_TX_DSP: + val = _tx_dsp_proxies[key.name]->get_link(); + return; + + case MBOARD_PROP_TX_DSP_NAMES: + val = _tx_dsp_proxies.keys(); + return; + + case MBOARD_PROP_CLOCK_CONFIG: + val = _clock_config; + return; + + case MBOARD_PROP_TIME_NOW: while(true){ + uint32_t secs = _iface->peek32(_iface->regs.time64_secs_rb_imm); + uint32_t ticks = _iface->peek32(_iface->regs.time64_ticks_rb_imm); + if (secs != _iface->peek32(_iface->regs.time64_secs_rb_imm)) continue; + val = time_spec_t(secs, ticks, get_master_clock_freq()); + return; + } + + case MBOARD_PROP_TIME_PPS: while(true){ + uint32_t secs = _iface->peek32(_iface->regs.time64_secs_rb_pps); + uint32_t ticks = _iface->peek32(_iface->regs.time64_ticks_rb_pps); + if (secs != _iface->peek32(_iface->regs.time64_secs_rb_pps)) continue; + val = time_spec_t(secs, ticks, get_master_clock_freq()); + return; + } + + case MBOARD_PROP_RX_SUBDEV_SPEC: + val = _rx_subdev_spec; + return; + + case MBOARD_PROP_TX_SUBDEV_SPEC: + val = _tx_subdev_spec; + return; + + case MBOARD_PROP_EEPROM_MAP: + val = _iface->mb_eeprom; + return; + + case MBOARD_PROP_CLOCK_RATE: + val = this->get_master_clock_freq(); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * MBoard Set Properties + **********************************************************************/ +void usrp2_mboard_impl::set(const wax::obj &key, const wax::obj &val){ + //handle the set request conditioned on the key + switch(key.as<mboard_prop_t>()){ + + case MBOARD_PROP_CLOCK_CONFIG: + _clock_config = val.as<clock_config_t>(); + update_clock_config(); + return; + + case MBOARD_PROP_TIME_NOW: + set_time_spec(val.as<time_spec_t>(), true); + return; + + case MBOARD_PROP_TIME_PPS: + set_time_spec(val.as<time_spec_t>(), false); + return; + + case MBOARD_PROP_RX_SUBDEV_SPEC: + _rx_subdev_spec = val.as<subdev_spec_t>(); + verify_rx_subdev_spec(_rx_subdev_spec, this->get_link()); + //sanity check + UHD_ASSERT_THROW(_rx_subdev_spec.size() <= NUM_RX_DSPS); + //set the mux + for (size_t i = 0; i < _rx_subdev_spec.size(); i++){ + if (_rx_subdev_spec.size() >= 1) _iface->poke32(_iface->regs.dsp_rx[i].mux, dsp_type1::calc_rx_mux_word( + _dboard_manager->get_rx_subdev(_rx_subdev_spec[i].sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() + )); + } + _device.update_xport_channel_mapping(); + return; + + case MBOARD_PROP_TX_SUBDEV_SPEC: + _tx_subdev_spec = val.as<subdev_spec_t>(); + verify_tx_subdev_spec(_tx_subdev_spec, this->get_link()); + //sanity check + UHD_ASSERT_THROW(_tx_subdev_spec.size() <= NUM_TX_DSPS); + //set the mux + for (size_t i = 0; i < _rx_subdev_spec.size(); i++){ + _iface->poke32(_iface->regs.dsp_tx_mux, dsp_type1::calc_tx_mux_word( + _dboard_manager->get_tx_subdev(_tx_subdev_spec[i].sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() + )); + } + _device.update_xport_channel_mapping(); + return; + + case MBOARD_PROP_EEPROM_MAP: + // Step1: commit the map, writing only those values set. + // Step2: readback the entire eeprom map into the iface. + val.as<mboard_eeprom_t>().commit(*_iface, mboard_eeprom_t::MAP_N100); + _iface->mb_eeprom = mboard_eeprom_t(*_iface, mboard_eeprom_t::MAP_N100); + return; + + case MBOARD_PROP_CLOCK_RATE: + UHD_ASSERT_THROW(val.as<double>() == this->get_master_clock_freq()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/usrp2/usrp2_clk_regs.hpp b/host/lib/usrp/usrp2/usrp2_clk_regs.hpp new file mode 100644 index 000000000..6c46d0a35 --- /dev/null +++ b/host/lib/usrp/usrp2/usrp2_clk_regs.hpp @@ -0,0 +1,85 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP2_CLK_REGS_HPP +#define INCLUDED_USRP2_CLK_REGS_HPP + +#include "usrp2_iface.hpp" + +class usrp2_clk_regs_t { +public: + usrp2_clk_regs_t(void) { ; } + usrp2_clk_regs_t(usrp2_iface::rev_type rev) { + test = 0; + fpga = 1; + dac = 3; + + switch(rev) { + case usrp2_iface::USRP2_REV3: + exp = 2; + adc = 4; + serdes = 2; + tx_db = 6; + break; + case usrp2_iface::USRP2_REV4: + exp = 5; + adc = 4; + serdes = 2; + tx_db = 6; + break; + case usrp2_iface::USRP_N200: + case usrp2_iface::USRP_N210: + exp = 6; + adc = 2; + serdes = 4; + tx_db = 5; + break; + case usrp2_iface::USRP_NXXX: + //dont throw, it may be unitialized + break; + } + + rx_db = 7; + } + + static int output(int clknum) { return 0x3C + clknum; } + static int div_lo(int clknum) { return 0x48 + 2 * clknum; } + static int div_hi(int clknum) { return 0x49 + 2 * clknum; } + + const static int acounter = 0x04; + const static int bcounter_msb = 0x05; + const static int bcounter_lsb = 0x06; + const static int pll_1 = 0x07; + const static int pll_2 = 0x08; + const static int pll_3 = 0x09; + const static int pll_4 = 0x0A; + const static int ref_counter_msb = 0x0B; + const static int ref_counter_lsb = 0x0C; + const static int pll_5 = 0x0D; + const static int update = 0x5A; + + int test; + int fpga; + int adc; + int dac; + int serdes; + int exp; + int tx_db; + int rx_db; +}; + +#endif //INCLUDED_USRP2_CLK_REGS_HPP diff --git a/host/lib/usrp/usrp2/usrp2_iface.cpp b/host/lib/usrp/usrp2/usrp2_iface.cpp new file mode 100644 index 000000000..e3827233b --- /dev/null +++ b/host/lib/usrp/usrp2/usrp2_iface.cpp @@ -0,0 +1,324 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp2_regs.hpp" +#include "fw_common.h" +#include "usrp2_iface.hpp" +#include <uhd/exception.hpp> +#include <uhd/types/dict.hpp> +#include <boost/thread.hpp> +#include <boost/foreach.hpp> +#include <boost/asio.hpp> //used for htonl and ntohl +#include <boost/assign/list_of.hpp> +#include <boost/format.hpp> +#include <boost/tokenizer.hpp> +#include <algorithm> + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; + +static const double CTRL_RECV_TIMEOUT = 1.0; + +class usrp2_iface_impl : public usrp2_iface{ +public: +/*********************************************************************** + * Structors + **********************************************************************/ + usrp2_iface_impl(udp_simple::sptr ctrl_transport){ + _ctrl_transport = ctrl_transport; + _ctrl_seq_num = 0; + + mb_eeprom = mboard_eeprom_t(*this, mboard_eeprom_t::MAP_N100); + switch(this->get_rev()){ + case USRP2_REV3: + case USRP2_REV4: + regs = usrp2_get_regs(false); + break; + + case USRP_N200: + case USRP_N210: + regs = usrp2_get_regs(true); + break; + + case USRP_NXXX: //fallthough case is old register map (USRP2) + regs = usrp2_get_regs(false); + break; + } + + //check the fpga compatibility number + const boost::uint32_t fpga_compat_num = this->peek32(this->regs.compat_num_rb); + if (fpga_compat_num != USRP2_FPGA_COMPAT_NUM){ + throw uhd::runtime_error(str(boost::format( + "Expected fpga compatibility number %d, but got %d:\n" + "The fpga build is not compatible with the host code build." + ) % int(USRP2_FPGA_COMPAT_NUM) % fpga_compat_num)); + } + } + +/*********************************************************************** + * Peek and Poke + **********************************************************************/ + void poke32(boost::uint32_t addr, boost::uint32_t data){ + return this->poke<boost::uint32_t>(addr, data); + } + + boost::uint32_t peek32(boost::uint32_t addr){ + return this->peek<boost::uint32_t>(addr); + } + + void poke16(boost::uint32_t addr, boost::uint16_t data){ + return this->poke<boost::uint16_t>(addr, data); + } + + boost::uint16_t peek16(boost::uint32_t addr){ + return this->peek<boost::uint16_t>(addr); + } + +/*********************************************************************** + * SPI + **********************************************************************/ + boost::uint32_t transact_spi( + int which_slave, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits, + bool readback + ){ + static const uhd::dict<spi_config_t::edge_t, int> spi_edge_to_otw = boost::assign::map_list_of + (spi_config_t::EDGE_RISE, USRP2_CLK_EDGE_RISE) + (spi_config_t::EDGE_FALL, USRP2_CLK_EDGE_FALL) + ; + + //setup the out data + usrp2_ctrl_data_t out_data; + out_data.id = htonl(USRP2_CTRL_ID_TRANSACT_ME_SOME_SPI_BRO); + out_data.data.spi_args.dev = htonl(which_slave); + out_data.data.spi_args.miso_edge = spi_edge_to_otw[config.miso_edge]; + out_data.data.spi_args.mosi_edge = spi_edge_to_otw[config.mosi_edge]; + out_data.data.spi_args.readback = (readback)? 1 : 0; + out_data.data.spi_args.num_bits = num_bits; + out_data.data.spi_args.data = htonl(data); + + //send and recv + usrp2_ctrl_data_t in_data = this->ctrl_send_and_recv(out_data); + UHD_ASSERT_THROW(ntohl(in_data.id) == USRP2_CTRL_ID_OMG_TRANSACTED_SPI_DUDE); + + return ntohl(in_data.data.spi_args.data); + } + +/*********************************************************************** + * I2C + **********************************************************************/ + void write_i2c(boost::uint8_t addr, const byte_vector_t &buf){ + //setup the out data + usrp2_ctrl_data_t out_data; + out_data.id = htonl(USRP2_CTRL_ID_WRITE_THESE_I2C_VALUES_BRO); + out_data.data.i2c_args.addr = addr; + out_data.data.i2c_args.bytes = buf.size(); + + //limitation of i2c transaction size + UHD_ASSERT_THROW(buf.size() <= sizeof(out_data.data.i2c_args.data)); + + //copy in the data + std::copy(buf.begin(), buf.end(), out_data.data.i2c_args.data); + + //send and recv + usrp2_ctrl_data_t in_data = this->ctrl_send_and_recv(out_data); + UHD_ASSERT_THROW(ntohl(in_data.id) == USRP2_CTRL_ID_COOL_IM_DONE_I2C_WRITE_DUDE); + } + + byte_vector_t read_i2c(boost::uint8_t addr, size_t num_bytes){ + //setup the out data + usrp2_ctrl_data_t out_data; + out_data.id = htonl(USRP2_CTRL_ID_DO_AN_I2C_READ_FOR_ME_BRO); + out_data.data.i2c_args.addr = addr; + out_data.data.i2c_args.bytes = num_bytes; + + //limitation of i2c transaction size + UHD_ASSERT_THROW(num_bytes <= sizeof(out_data.data.i2c_args.data)); + + //send and recv + usrp2_ctrl_data_t in_data = this->ctrl_send_and_recv(out_data); + UHD_ASSERT_THROW(ntohl(in_data.id) == USRP2_CTRL_ID_HERES_THE_I2C_DATA_DUDE); + UHD_ASSERT_THROW(in_data.data.i2c_args.addr = num_bytes); + + //copy out the data + byte_vector_t result(num_bytes); + std::copy(in_data.data.i2c_args.data, in_data.data.i2c_args.data + num_bytes, result.begin()); + return result; + } + +/*********************************************************************** + * UART + **********************************************************************/ + void write_uart(boost::uint8_t dev, const std::string &buf){ + //first tokenize the string into 20-byte substrings + boost::offset_separator f(20, 1, true, true); + boost::tokenizer<boost::offset_separator> tok(buf, f); + std::vector<std::string> queue(tok.begin(), tok.end()); + + BOOST_FOREACH(std::string item, queue) { + //setup the out data + usrp2_ctrl_data_t out_data; + out_data.id = htonl(USRP2_CTRL_ID_HEY_WRITE_THIS_UART_FOR_ME_BRO); + out_data.data.uart_args.dev = dev; + out_data.data.uart_args.bytes = item.size(); + + //limitation of uart transaction size + UHD_ASSERT_THROW(item.size() <= sizeof(out_data.data.uart_args.data)); + + //copy in the data + std::copy(item.begin(), item.end(), out_data.data.uart_args.data); + + //send and recv + usrp2_ctrl_data_t in_data = this->ctrl_send_and_recv(out_data); + UHD_ASSERT_THROW(ntohl(in_data.id) == USRP2_CTRL_ID_MAN_I_TOTALLY_WROTE_THAT_UART_DUDE); + } + } + + std::string read_uart(boost::uint8_t dev){ + int readlen = 20; + std::string result; + while(readlen == 20) { //while we keep receiving full packets + //setup the out data + usrp2_ctrl_data_t out_data; + out_data.id = htonl(USRP2_CTRL_ID_SO_LIKE_CAN_YOU_READ_THIS_UART_BRO); + out_data.data.uart_args.dev = dev; + out_data.data.uart_args.bytes = 20; + + //limitation of uart transaction size + //UHD_ASSERT_THROW(num_bytes <= sizeof(out_data.data.uart_args.data)); + + //send and recv + usrp2_ctrl_data_t in_data = this->ctrl_send_and_recv(out_data); + UHD_ASSERT_THROW(ntohl(in_data.id) == USRP2_CTRL_ID_I_HELLA_READ_THAT_UART_DUDE); + readlen = in_data.data.uart_args.bytes; + + //copy out the data + result += std::string((const char *)in_data.data.uart_args.data, (size_t)readlen); + } + return result; + } + + gps_send_fn_t get_gps_write_fn(void) { + return boost::bind(&usrp2_iface_impl::write_uart, this, 2, _1); //2 is the GPS UART port on USRP2 + } + + gps_recv_fn_t get_gps_read_fn(void) { + return boost::bind(&usrp2_iface_impl::read_uart, this, 2); //2 is the GPS UART port on USRP2 + } + +/*********************************************************************** + * Send/Recv over control + **********************************************************************/ + usrp2_ctrl_data_t ctrl_send_and_recv(const usrp2_ctrl_data_t &out_data){ + boost::mutex::scoped_lock lock(_ctrl_mutex); + + //fill in the seq number and send + usrp2_ctrl_data_t out_copy = out_data; + out_copy.proto_ver = htonl(USRP2_FW_COMPAT_NUM); + out_copy.seq = htonl(++_ctrl_seq_num); + _ctrl_transport->send(boost::asio::buffer(&out_copy, sizeof(usrp2_ctrl_data_t))); + + //loop until we get the packet or timeout + boost::uint8_t usrp2_ctrl_data_in_mem[udp_simple::mtu]; //allocate max bytes for recv + const usrp2_ctrl_data_t *ctrl_data_in = reinterpret_cast<const usrp2_ctrl_data_t *>(usrp2_ctrl_data_in_mem); + while(true){ + size_t len = _ctrl_transport->recv(boost::asio::buffer(usrp2_ctrl_data_in_mem), CTRL_RECV_TIMEOUT); + if(len >= sizeof(boost::uint32_t) and ntohl(ctrl_data_in->proto_ver) != USRP2_FW_COMPAT_NUM){ + throw uhd::runtime_error(str(boost::format( + "Expected protocol compatibility number %d, but got %d:\n" + "The firmware build is not compatible with the host code build." + ) % int(USRP2_FW_COMPAT_NUM) % ntohl(ctrl_data_in->proto_ver))); + } + if (len >= sizeof(usrp2_ctrl_data_t) and ntohl(ctrl_data_in->seq) == _ctrl_seq_num){ + return *ctrl_data_in; + } + if (len == 0) break; //timeout + //didnt get seq or bad packet, continue looking... + } + throw uhd::runtime_error("no control response"); + } + + rev_type get_rev(void){ + switch (boost::lexical_cast<boost::uint16_t>(mb_eeprom["rev"])){ + case 0x0300: + case 0x0301: return USRP2_REV3; + case 0x0400: return USRP2_REV4; + case 0x0A00: return USRP_N200; + case 0x0A01: return USRP_N210; + } + return USRP_NXXX; //unknown type + } + + const std::string get_cname(void){ + switch(this->get_rev()){ + case USRP2_REV3: return "USRP2-REV3"; + case USRP2_REV4: return "USRP2-REV4"; + case USRP_N200: return "USRP-N200"; + case USRP_N210: return "USRP-N210"; + case USRP_NXXX: return "USRP-N???"; + } + UHD_THROW_INVALID_CODE_PATH(); + } + +private: + //this lovely lady makes it all possible + udp_simple::sptr _ctrl_transport; + + //used in send/recv + boost::mutex _ctrl_mutex; + boost::uint32_t _ctrl_seq_num; + +/*********************************************************************** + * Private Templated Peek and Poke + **********************************************************************/ + template <class T> void poke(boost::uint32_t addr, T data){ + //setup the out data + usrp2_ctrl_data_t out_data; + out_data.id = htonl(USRP2_CTRL_ID_POKE_THIS_REGISTER_FOR_ME_BRO); + out_data.data.poke_args.addr = htonl(addr); + out_data.data.poke_args.data = htonl(boost::uint32_t(data)); + out_data.data.poke_args.num_bytes = sizeof(T); + + //send and recv + usrp2_ctrl_data_t in_data = this->ctrl_send_and_recv(out_data); + UHD_ASSERT_THROW(ntohl(in_data.id) == USRP2_CTRL_ID_OMG_POKED_REGISTER_SO_BAD_DUDE); + } + + template <class T> T peek(boost::uint32_t addr){ + //setup the out data + usrp2_ctrl_data_t out_data; + out_data.id = htonl(USRP2_CTRL_ID_PEEK_AT_THIS_REGISTER_FOR_ME_BRO); + out_data.data.poke_args.addr = htonl(addr); + out_data.data.poke_args.num_bytes = sizeof(T); + + //send and recv + usrp2_ctrl_data_t in_data = this->ctrl_send_and_recv(out_data); + UHD_ASSERT_THROW(ntohl(in_data.id) == USRP2_CTRL_ID_WOAH_I_DEFINITELY_PEEKED_IT_DUDE); + return T(ntohl(in_data.data.poke_args.data)); + } +}; + +/*********************************************************************** + * Public make function for usrp2 interface + **********************************************************************/ +usrp2_iface::sptr usrp2_iface::make(udp_simple::sptr ctrl_transport){ + return usrp2_iface::sptr(new usrp2_iface_impl(ctrl_transport)); +} + diff --git a/host/lib/usrp/usrp2/usrp2_iface.hpp b/host/lib/usrp/usrp2/usrp2_iface.hpp new file mode 100644 index 000000000..df53ec66a --- /dev/null +++ b/host/lib/usrp/usrp2/usrp2_iface.hpp @@ -0,0 +1,78 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP2_IFACE_HPP +#define INCLUDED_USRP2_IFACE_HPP + +#include <uhd/transport/udp_simple.hpp> +#include <uhd/usrp/mboard_iface.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include <boost/cstdint.hpp> +#include <boost/function.hpp> +#include <utility> +#include <string> +#include "usrp2_regs.hpp" + + +//TODO: kill this crap when you have the top level GPS include file +typedef boost::function<void(std::string)> gps_send_fn_t; +typedef boost::function<std::string(void)> gps_recv_fn_t; + +/*! + * The usrp2 interface class: + * Provides a set of functions to implementation layer. + * Including spi, peek, poke, control... + */ +class usrp2_iface : public uhd::usrp::mboard_iface, boost::noncopyable{ +public: + typedef boost::shared_ptr<usrp2_iface> sptr; + /*! + * Make a new usrp2 interface with the control transport. + * \param ctrl_transport the udp transport object + * \return a new usrp2 interface object + */ + static sptr make(uhd::transport::udp_simple::sptr ctrl_transport); + + virtual gps_recv_fn_t get_gps_read_fn(void) = 0; + virtual gps_send_fn_t get_gps_write_fn(void) = 0; + + //! The list of possible revision types + enum rev_type { + USRP2_REV3 = 3, + USRP2_REV4 = 4, + USRP_N200 = 200, + USRP_N210 = 210, + USRP_NXXX = 0 + }; + + //! Get the revision type for this device + virtual rev_type get_rev(void) = 0; + + //! Get the canonical name for this device + virtual const std::string get_cname(void) = 0; + + /*! + * Register map selected from USRP2/USRP2+. + */ + usrp2_regs_t regs; + + //motherboard eeprom map structure + uhd::usrp::mboard_eeprom_t mb_eeprom; +}; + +#endif /* INCLUDED_USRP2_IFACE_HPP */ diff --git a/host/lib/usrp/usrp2/usrp2_impl.cpp b/host/lib/usrp/usrp2/usrp2_impl.cpp new file mode 100644 index 000000000..96552929a --- /dev/null +++ b/host/lib/usrp/usrp2/usrp2_impl.cpp @@ -0,0 +1,316 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp2_impl.hpp" +#include "fw_common.h" +#include <uhd/exception.hpp> +#include <uhd/transport/if_addrs.hpp> +#include <uhd/transport/udp_zero_copy.hpp> +#include <uhd/usrp/device_props.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/utils/warning.hpp> +#include <uhd/utils/byteswap.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/format.hpp> +#include <boost/foreach.hpp> +#include <boost/lexical_cast.hpp> +#include <boost/bind.hpp> +#include <boost/asio/ip/address_v4.hpp> +#include <boost/asio.hpp> //used for htonl and ntohl +#include <iostream> +#include <vector> + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; +namespace asio = boost::asio; + +/*********************************************************************** + * Discovery over the udp transport + **********************************************************************/ +static device_addrs_t usrp2_find(const device_addr_t &hint_){ + //handle the multi-device discovery + device_addrs_t hints = separate_device_addr(hint_); + if (hints.size() > 1){ + device_addrs_t found_devices; + BOOST_FOREACH(const device_addr_t &hint_i, hints){ + device_addrs_t found_devices_i = usrp2_find(hint_i); + if (found_devices_i.size() != 1) throw uhd::value_error(str(boost::format( + "Could not resolve device hint \"%s\" to a single device." + ) % hint_i.to_string())); + found_devices.push_back(found_devices_i[0]); + } + return device_addrs_t(1, combine_device_addrs(found_devices)); + } + + //initialize the hint for a single device case + UHD_ASSERT_THROW(hints.size() <= 1); + hints.resize(1); //in case it was empty + device_addr_t hint = hints[0]; + device_addrs_t usrp2_addrs; + + //return an empty list of addresses when type is set to non-usrp2 + if (hint.has_key("type") and hint["type"] != "usrp2") return usrp2_addrs; + + //if no address was specified, send a broadcast on each interface + if (not hint.has_key("addr")){ + BOOST_FOREACH(const if_addrs_t &if_addrs, get_if_addrs()){ + //avoid the loopback device + if (if_addrs.inet == asio::ip::address_v4::loopback().to_string()) continue; + + //create a new hint with this broadcast address + device_addr_t new_hint = hint; + new_hint["addr"] = if_addrs.bcast; + + //call discover with the new hint and append results + device_addrs_t new_usrp2_addrs = usrp2_find(new_hint); + usrp2_addrs.insert(usrp2_addrs.begin(), + new_usrp2_addrs.begin(), new_usrp2_addrs.end() + ); + } + return usrp2_addrs; + } + + //create a udp transport to communicate + std::string ctrl_port = boost::lexical_cast<std::string>(USRP2_UDP_CTRL_PORT); + udp_simple::sptr udp_transport = udp_simple::make_broadcast( + hint["addr"], ctrl_port + ); + + //send a hello control packet + usrp2_ctrl_data_t ctrl_data_out; + ctrl_data_out.proto_ver = uhd::htonx<boost::uint32_t>(USRP2_FW_COMPAT_NUM); + ctrl_data_out.id = uhd::htonx<boost::uint32_t>(USRP2_CTRL_ID_WAZZUP_BRO); + udp_transport->send(boost::asio::buffer(&ctrl_data_out, sizeof(ctrl_data_out))); + + //loop and recieve until the timeout + boost::uint8_t usrp2_ctrl_data_in_mem[udp_simple::mtu]; //allocate max bytes for recv + const usrp2_ctrl_data_t *ctrl_data_in = reinterpret_cast<const usrp2_ctrl_data_t *>(usrp2_ctrl_data_in_mem); + while(true){ + size_t len = udp_transport->recv(asio::buffer(usrp2_ctrl_data_in_mem)); + //std::cout << len << "\n"; + if (len > offsetof(usrp2_ctrl_data_t, data) and ntohl(ctrl_data_in->id) == USRP2_CTRL_ID_WAZZUP_DUDE){ + //make a boost asio ipv4 with the raw addr in host byte order + boost::asio::ip::address_v4 ip_addr(ntohl(ctrl_data_in->data.ip_addr)); + device_addr_t new_addr; + new_addr["type"] = "usrp2"; + new_addr["addr"] = ip_addr.to_string(); + //Attempt to read the name from the EEPROM and perform filtering. + //This operation can throw due to compatibility mismatch. + //In this case, the discovered device will be ignored. + try{ + mboard_eeprom_t mb_eeprom = usrp2_iface::make(udp_simple::make_connected( + new_addr["addr"], boost::lexical_cast<std::string>(USRP2_UDP_CTRL_PORT) + ))->mb_eeprom; + new_addr["name"] = mb_eeprom["name"]; + new_addr["serial"] = mb_eeprom["serial"]; + if ( + (not hint.has_key("name") or hint["name"] == new_addr["name"]) and + (not hint.has_key("serial") or hint["serial"] == new_addr["serial"]) + ){ + usrp2_addrs.push_back(new_addr); + } + } + catch(const std::exception &e){ + uhd::warning::post( + std::string("Ignoring discovered device\n") + + e.what() + ); + } + //dont break here, it will exit the while loop + //just continue on to the next loop iteration + } + if (len == 0) break; //timeout + } + + return usrp2_addrs; +} + +/*********************************************************************** + * Make + **********************************************************************/ +static device::sptr usrp2_make(const device_addr_t &device_addr){ + return device::sptr(new usrp2_impl(device_addr)); +} + +UHD_STATIC_BLOCK(register_usrp2_device){ + device::register_device(&usrp2_find, &usrp2_make); +} + +/*********************************************************************** + * MTU Discovery + **********************************************************************/ +struct mtu_result_t{ + size_t recv_mtu, send_mtu; +}; + +static mtu_result_t determine_mtu(const std::string &addr){ + udp_simple::sptr udp_sock = udp_simple::make_connected( + addr, BOOST_STRINGIZE(USRP2_UDP_CTRL_PORT) + ); + + //The FPGA offers 4K buffers, and the user may manually request this. + //However, multiple simultaneous receives (2DSP slave + 2DSP master), + //require that buffering to be used internally, and this is a safe setting. + boost::uint8_t buffer[2000]; + usrp2_ctrl_data_t *ctrl_data = reinterpret_cast<usrp2_ctrl_data_t *>(buffer); + static const double echo_timeout = 0.020; //20 ms + + size_t min_recv_mtu = sizeof(usrp2_ctrl_data_t), max_recv_mtu = sizeof(buffer); + size_t min_send_mtu = sizeof(usrp2_ctrl_data_t), max_send_mtu = sizeof(buffer); + + while (min_recv_mtu < max_recv_mtu){ + + size_t test_mtu = (max_recv_mtu/2 + min_recv_mtu/2 + 3) & ~3; + //std::cout << "recv_mtu " << mtu.recv_mtu << std::endl; + + ctrl_data->id = htonl(USRP2_CTRL_ID_HOLLER_AT_ME_BRO); + ctrl_data->proto_ver = htonl(USRP2_FW_COMPAT_NUM); + ctrl_data->data.echo_args.len = htonl(test_mtu); + udp_sock->send(boost::asio::buffer(buffer, sizeof(usrp2_ctrl_data_t))); + + size_t len = udp_sock->recv(boost::asio::buffer(buffer), echo_timeout); + + if (len >= test_mtu) min_recv_mtu = test_mtu; + else max_recv_mtu = test_mtu - 4; + + } + + while (min_send_mtu < max_send_mtu){ + + size_t test_mtu = (max_send_mtu/2 + min_send_mtu/2 + 3) & ~3; + //std::cout << "send_mtu " << mtu.send_mtu << std::endl; + + ctrl_data->id = htonl(USRP2_CTRL_ID_HOLLER_AT_ME_BRO); + ctrl_data->proto_ver = htonl(USRP2_FW_COMPAT_NUM); + ctrl_data->data.echo_args.len = htonl(sizeof(usrp2_ctrl_data_t)); + udp_sock->send(boost::asio::buffer(buffer, test_mtu)); + + size_t len = udp_sock->recv(boost::asio::buffer(buffer), echo_timeout); + if (len >= sizeof(usrp2_ctrl_data_t)) len = ntohl(ctrl_data->data.echo_args.len); + + if (len >= test_mtu) min_send_mtu = test_mtu; + else max_send_mtu = test_mtu - 4; + } + + mtu_result_t mtu; + mtu.recv_mtu = min_recv_mtu; + mtu.send_mtu = min_send_mtu; + return mtu; +} + +/*********************************************************************** + * Structors + **********************************************************************/ +usrp2_impl::usrp2_impl(const device_addr_t &_device_addr){ + device_addr_t device_addr = _device_addr; + + //setup the dsp transport hints (default to a large recv buff) + if (not device_addr.has_key("recv_buff_size")){ + #if defined(UHD_PLATFORM_MACOS) || defined(UHD_PLATFORM_BSD) + //limit buffer resize on macos or it will error + device_addr["recv_buff_size"] = "1e6"; + #elif defined(UHD_PLATFORM_LINUX) || defined(UHD_PLATFORM_WIN32) + //set to half-a-second of buffering at max rate + device_addr["recv_buff_size"] = "50e6"; + #endif + } + + device_addrs_t device_args = separate_device_addr(device_addr); + + //calculate the minimum send and recv mtu of all devices + mtu_result_t mtu = determine_mtu(device_args[0]["addr"]); + for (size_t i = 1; i < device_args.size(); i++){ + mtu_result_t mtu_i = determine_mtu(device_args[i]["addr"]); + mtu.recv_mtu = std::min(mtu.recv_mtu, mtu_i.recv_mtu); + mtu.send_mtu = std::min(mtu.send_mtu, mtu_i.send_mtu); + } + + std::cout << "mtu recv bytes " << mtu.recv_mtu << std::endl; + std::cout << "mtu send bytes " << mtu.send_mtu << std::endl; + + //use the discovered mtu if not specified by the user + if (not device_addr.has_key("recv_frame_size")) + device_addr["recv_frame_size"] = boost::lexical_cast<std::string>(mtu.recv_mtu); + if (not device_addr.has_key("send_frame_size")) + device_addr["send_frame_size"] = boost::lexical_cast<std::string>(mtu.send_mtu); + + //setup rx otw type + _rx_otw_type.width = 16; + _rx_otw_type.shift = 0; + _rx_otw_type.byteorder = uhd::otw_type_t::BO_BIG_ENDIAN; + + //setup tx otw type + _tx_otw_type.width = 16; + _tx_otw_type.shift = 0; + _tx_otw_type.byteorder = uhd::otw_type_t::BO_BIG_ENDIAN; + + //!!!!! set the otw type here before continuing, its used below + + //create a new mboard handler for each control transport + for(size_t i = 0; i < device_args.size(); i++){ + device_addr_t dev_addr_i = device_args[i]; + BOOST_FOREACH(const std::string &key, device_addr.keys()){ + if (dev_addr_i.has_key(key)) continue; + dev_addr_i[key] = device_addr[key]; + } + _mboards.push_back(usrp2_mboard_impl::sptr( + new usrp2_mboard_impl(dev_addr_i, i, *this) + )); + //use an empty name when there is only one mboard + std::string name = (device_args.size() > 1)? boost::lexical_cast<std::string>(i) : ""; + _mboard_dict[name] = _mboards.back(); + } + + //init the send and recv io + io_init(); + +} + +usrp2_impl::~usrp2_impl(void){ + /* NOP */ +} + +/*********************************************************************** + * Device Properties + **********************************************************************/ +void usrp2_impl::get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<device_prop_t>()){ + case DEVICE_PROP_NAME: + if (_mboards.size() > 1) val = std::string("USRP2/N Series multi-device"); + else val = std::string("USRP2/N Series device"); + return; + + case DEVICE_PROP_MBOARD: + val = _mboard_dict[key.name]->get_link(); + return; + + case DEVICE_PROP_MBOARD_NAMES: + val = prop_names_t(_mboard_dict.keys()); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void usrp2_impl::set(const wax::obj &, const wax::obj &){ + UHD_THROW_PROP_SET_ERROR(); +} diff --git a/host/lib/usrp/usrp2/usrp2_impl.hpp b/host/lib/usrp/usrp2/usrp2_impl.hpp new file mode 100644 index 000000000..0676cecf2 --- /dev/null +++ b/host/lib/usrp/usrp2/usrp2_impl.hpp @@ -0,0 +1,223 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP2_IMPL_HPP +#define INCLUDED_USRP2_IMPL_HPP + +#include "usrp2_iface.hpp" +#include "clock_ctrl.hpp" +#include "codec_ctrl.hpp" +#include <uhd/usrp/gps_ctrl.hpp> +#include <uhd/device.hpp> +#include <uhd/utils/pimpl.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/types/otw_type.hpp> +#include <uhd/types/stream_cmd.hpp> +#include <uhd/types/clock_config.hpp> +#include <uhd/usrp/dboard_eeprom.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/function.hpp> +#include <uhd/transport/vrt_if_packet.hpp> +#include <uhd/transport/udp_simple.hpp> +#include <uhd/transport/udp_zero_copy.hpp> +#include <uhd/usrp/dboard_manager.hpp> +#include <uhd/usrp/subdev_spec.hpp> + +/*! + * Make a usrp2 dboard interface. + * \param iface the usrp2 interface object + * \param clk_ctrl the clock control object + * \return a sptr to a new dboard interface + */ +uhd::usrp::dboard_iface::sptr make_usrp2_dboard_iface( + usrp2_iface::sptr iface, + usrp2_clock_ctrl::sptr clk_ctrl +); + +/*! + * Simple wax obj proxy class: + * Provides a wax obj interface for a set and a get function. + * This allows us to create nested properties structures + * while maintaining flattened code within the implementation. + */ +class wax_obj_proxy : public wax::obj{ +public: + typedef boost::function<void(const wax::obj &, wax::obj &)> get_t; + typedef boost::function<void(const wax::obj &, const wax::obj &)> set_t; + typedef boost::shared_ptr<wax_obj_proxy> sptr; + + static sptr make(const get_t &get, const set_t &set){ + return sptr(new wax_obj_proxy(get, set)); + } + +private: + get_t _get; set_t _set; + wax_obj_proxy(const get_t &get, const set_t &set): _get(get), _set(set){}; + void get(const wax::obj &key, wax::obj &val){return _get(key, val);} + void set(const wax::obj &key, const wax::obj &val){return _set(key, val);} +}; + +class usrp2_impl; + +/*! + * USRP2 mboard implementation guts: + * The implementation details are encapsulated here. + * Handles properties on the mboard, dboard, dsps... + */ +class usrp2_mboard_impl : public wax::obj{ +public: + typedef boost::shared_ptr<usrp2_mboard_impl> sptr; + + static const size_t NUM_RX_DSPS = 2; + static const size_t NUM_TX_DSPS = 1; + static const size_t MAX_NUM_DSPS = 2; + + //structors + usrp2_mboard_impl( + const uhd::device_addr_t &device_addr, + size_t index, usrp2_impl &device + ); + ~usrp2_mboard_impl(void); + + inline double get_master_clock_freq(void){ + return _clock_ctrl->get_master_clock_rate(); + } + + void handle_overflow(size_t); + +private: + size_t _index; + usrp2_impl &_device; + bool _mimo_clocking_mode_is_master; + + //interfaces + usrp2_iface::sptr _iface; + usrp2_clock_ctrl::sptr _clock_ctrl; + usrp2_codec_ctrl::sptr _codec_ctrl; + gps_ctrl::sptr _gps_ctrl; + + //properties for this mboard + void get(const wax::obj &, wax::obj &); + void set(const wax::obj &, const wax::obj &); + uhd::usrp::subdev_spec_t _rx_subdev_spec, _tx_subdev_spec; + + //rx and tx dboard methods and objects + uhd::usrp::dboard_manager::sptr _dboard_manager; + uhd::usrp::dboard_iface::sptr _dboard_iface; + void dboard_init(void); + + //methods and shadows for clock configuration + uhd::clock_config_t _clock_config; + void update_clock_config(void); + void set_time_spec(const uhd::time_spec_t &time_spec, bool now); + + //properties interface for the codec + void codec_init(void); + void rx_codec_get(const wax::obj &, wax::obj &); + void rx_codec_set(const wax::obj &, const wax::obj &); + void tx_codec_get(const wax::obj &, wax::obj &); + void tx_codec_set(const wax::obj &, const wax::obj &); + wax_obj_proxy::sptr _rx_codec_proxy; + wax_obj_proxy::sptr _tx_codec_proxy; + + void rx_codec_set_gain(double, const std::string &); + uhd::dict<std::string, double> _codec_rx_gains; + + //properties interface for rx dboard + void rx_dboard_get(const wax::obj &, wax::obj &); + void rx_dboard_set(const wax::obj &, const wax::obj &); + wax_obj_proxy::sptr _rx_dboard_proxy; + uhd::usrp::dboard_eeprom_t _rx_db_eeprom; + + //properties interface for tx dboard + void tx_dboard_get(const wax::obj &, wax::obj &); + void tx_dboard_set(const wax::obj &, const wax::obj &); + wax_obj_proxy::sptr _tx_dboard_proxy; + uhd::usrp::dboard_eeprom_t _tx_db_eeprom; + + //methods and shadows for the dsps + UHD_PIMPL_DECL(dsp_impl) _dsp_impl; + void dsp_init(void); + void issue_ddc_stream_cmd(const uhd::stream_cmd_t &, size_t); + + //properties interface for ddc + void ddc_get(const wax::obj &, wax::obj &, size_t); + void ddc_set(const wax::obj &, const wax::obj &, size_t); + uhd::dict<std::string, wax_obj_proxy::sptr> _rx_dsp_proxies; + + //properties interface for duc + void duc_get(const wax::obj &, wax::obj &, size_t); + void duc_set(const wax::obj &, const wax::obj &, size_t); + uhd::dict<std::string, wax_obj_proxy::sptr> _tx_dsp_proxies; + +}; + +/*! + * USRP2 implementation guts: + * The implementation details are encapsulated here. + * Handles device properties and streaming... + */ +class usrp2_impl : public uhd::device{ +public: + static const size_t sram_bytes = size_t(1 << 20); + static const boost::uint32_t RECV_SID = 1; + static const boost::uint32_t ASYNC_SID = 2; + + usrp2_impl(const uhd::device_addr_t &); + + ~usrp2_impl(void); + + //the io interface + size_t send( + const send_buffs_type &, size_t, + const uhd::tx_metadata_t &, const uhd::io_type_t &, + uhd::device::send_mode_t, double + ); + size_t recv( + const recv_buffs_type &, size_t, + uhd::rx_metadata_t &, const uhd::io_type_t &, + uhd::device::recv_mode_t, double + ); + size_t get_max_send_samps_per_packet(void) const; + size_t get_max_recv_samps_per_packet(void) const; + bool recv_async_msg(uhd::async_metadata_t &, double); + + void update_xport_channel_mapping(void); + + //public frame sizes, set by mboard, used by io impl + size_t recv_frame_size, send_frame_size; + + std::vector<uhd::transport::zero_copy_if::sptr> dsp_xports; + std::vector<uhd::transport::zero_copy_if::sptr> err_xports; + +private: + //device properties interface + void get(const wax::obj &, wax::obj &); + void set(const wax::obj &, const wax::obj &); + + //pointers to mboards on this device (think mimo setup) + std::vector<usrp2_mboard_impl::sptr> _mboards; + uhd::dict<std::string, usrp2_mboard_impl::sptr> _mboard_dict; + + //io impl methods and members + uhd::otw_type_t _rx_otw_type, _tx_otw_type; + UHD_PIMPL_DECL(io_impl) _io_impl; + void io_init(void); + void handle_overflow(size_t); +}; + +#endif /* INCLUDED_USRP2_IMPL_HPP */ diff --git a/host/lib/usrp/usrp2/usrp2_regs.cpp b/host/lib/usrp/usrp2/usrp2_regs.cpp new file mode 100644 index 000000000..57ae36857 --- /dev/null +++ b/host/lib/usrp/usrp2/usrp2_regs.cpp @@ -0,0 +1,136 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp2_regs.hpp" +#include "usrp2_iface.hpp" + +//////////////////////////////////////////////////////////////////////// +// Define slave bases +//////////////////////////////////////////////////////////////////////// +#define ROUTER_RAM_BASE 0x4000 +#define SPI_BASE 0x5000 +#define I2C_BASE 0x5400 +#define GPIO_BASE 0x5800 +#define READBACK_BASE 0x5C00 +#define ETH_BASE 0x6000 +#define SETTING_REGS_BASE 0x7000 +#define PIC_BASE 0x8000 +#define UART_BASE 0x8800 +#define ATR_BASE 0x8C00 + +//////////////////////////////////////////////////////////////////////// +// Setting register offsets +//////////////////////////////////////////////////////////////////////// +#define SR_MISC 0 // 7 regs +#define SR_SIMTIMER 8 // 2 +#define SR_TIME64 10 // 6 +#define SR_BUF_POOL 16 // 4 + +#define SR_RX_FRONT 24 // 5 +#define SR_RX_CTRL0 32 // 9 +#define SR_RX_DSP0 48 // 7 +#define SR_RX_CTRL1 80 // 9 +#define SR_RX_DSP1 96 // 7 + +#define SR_TX_FRONT 128 // ? +#define SR_TX_CTRL 144 // 6 +#define SR_TX_DSP 160 // 5 + +#define SR_UDP_SM 192 // 64 + +int sr_addr(int sr) { + return SETTING_REGS_BASE + (4 * sr); +} + +usrp2_regs_t usrp2_get_regs(bool) { + usrp2_regs_t x; + x.misc_ctrl_clock = sr_addr(0); + x.misc_ctrl_serdes = sr_addr(1); + x.misc_ctrl_adc = sr_addr(2); + x.misc_ctrl_leds = sr_addr(3); + x.misc_ctrl_phy = sr_addr(4); + x.misc_ctrl_dbg_mux = sr_addr(5); + x.misc_ctrl_ram_page = sr_addr(6); + x.misc_ctrl_flush_icache = sr_addr(7); + x.misc_ctrl_led_src = sr_addr(8); + x.time64_secs = sr_addr(SR_TIME64 + 0); + x.time64_ticks = sr_addr(SR_TIME64 + 1); + x.time64_flags = sr_addr(SR_TIME64 + 2); + x.time64_imm = sr_addr(SR_TIME64 + 3); + x.time64_tps = sr_addr(SR_TIME64 + 4); + x.time64_mimo_sync = sr_addr(SR_TIME64 + 5); + x.status = READBACK_BASE + 4*8; + x.time64_secs_rb_imm = READBACK_BASE + 4*10; + x.time64_ticks_rb_imm = READBACK_BASE + 4*11; + x.compat_num_rb = READBACK_BASE + 4*12; + x.time64_secs_rb_pps = READBACK_BASE + 4*14; + x.time64_ticks_rb_pps = READBACK_BASE + 4*15; + x.dsp_tx_freq = sr_addr(SR_TX_DSP + 0); + x.dsp_tx_scale_iq = sr_addr(SR_TX_DSP + 1); + x.dsp_tx_interp_rate = sr_addr(SR_TX_DSP + 2); + x.dsp_tx_mux = sr_addr(SR_TX_DSP + 4); + x.dsp_rx[0].freq = sr_addr(SR_RX_DSP0 + 0); + x.dsp_rx[0].scale_iq = sr_addr(SR_RX_DSP0 + 1); + x.dsp_rx[0].decim_rate = sr_addr(SR_RX_DSP0 + 2); + x.dsp_rx[0].dcoffset_i = sr_addr(SR_RX_DSP0 + 3); + x.dsp_rx[0].dcoffset_q = sr_addr(SR_RX_DSP0 + 4); + x.dsp_rx[0].mux = sr_addr(SR_RX_DSP0 + 5); + x.dsp_rx[1].freq = sr_addr(SR_RX_DSP1 + 0); + x.dsp_rx[1].scale_iq = sr_addr(SR_RX_DSP1 + 1); + x.dsp_rx[1].decim_rate = sr_addr(SR_RX_DSP1 + 2); + x.dsp_rx[1].dcoffset_i = sr_addr(SR_RX_DSP1 + 3); + x.dsp_rx[1].dcoffset_q = sr_addr(SR_RX_DSP1 + 4); + x.dsp_rx[1].mux = sr_addr(SR_RX_DSP1 + 5); + x.gpio_io = GPIO_BASE + 0; + x.gpio_ddr = GPIO_BASE + 4; + x.gpio_tx_sel = GPIO_BASE + 8; + x.gpio_rx_sel = GPIO_BASE + 12; + x.atr_idle_txside = ATR_BASE + 0; + x.atr_idle_rxside = ATR_BASE + 2; + x.atr_intx_txside = ATR_BASE + 4; + x.atr_intx_rxside = ATR_BASE + 6; + x.atr_inrx_txside = ATR_BASE + 8; + x.atr_inrx_rxside = ATR_BASE + 10; + x.atr_full_txside = ATR_BASE + 12; + x.atr_full_rxside = ATR_BASE + 14; + x.rx_ctrl[0].stream_cmd = sr_addr(SR_RX_CTRL0 + 0); + x.rx_ctrl[0].time_secs = sr_addr(SR_RX_CTRL0 + 1); + x.rx_ctrl[0].time_ticks = sr_addr(SR_RX_CTRL0 + 2); + x.rx_ctrl[0].clear_overrun = sr_addr(SR_RX_CTRL0 + 3); + x.rx_ctrl[0].vrt_header = sr_addr(SR_RX_CTRL0 + 4); + x.rx_ctrl[0].vrt_stream_id = sr_addr(SR_RX_CTRL0 + 5); + x.rx_ctrl[0].vrt_trailer = sr_addr(SR_RX_CTRL0 + 6); + x.rx_ctrl[0].nsamps_per_pkt = sr_addr(SR_RX_CTRL0 + 7); + x.rx_ctrl[0].nchannels = sr_addr(SR_RX_CTRL0 + 8); + x.rx_ctrl[1].stream_cmd = sr_addr(SR_RX_CTRL1 + 0); + x.rx_ctrl[1].time_secs = sr_addr(SR_RX_CTRL1 + 1); + x.rx_ctrl[1].time_ticks = sr_addr(SR_RX_CTRL1 + 2); + x.rx_ctrl[1].clear_overrun = sr_addr(SR_RX_CTRL1 + 3); + x.rx_ctrl[1].vrt_header = sr_addr(SR_RX_CTRL1 + 4); + x.rx_ctrl[1].vrt_stream_id = sr_addr(SR_RX_CTRL1 + 5); + x.rx_ctrl[1].vrt_trailer = sr_addr(SR_RX_CTRL1 + 6); + x.rx_ctrl[1].nsamps_per_pkt = sr_addr(SR_RX_CTRL1 + 7); + x.rx_ctrl[1].nchannels = sr_addr(SR_RX_CTRL1 + 8); + x.tx_ctrl_num_chan = sr_addr(SR_TX_CTRL + 0); + x.tx_ctrl_clear_state = sr_addr(SR_TX_CTRL + 1); + x.tx_ctrl_report_sid = sr_addr(SR_TX_CTRL + 2); + x.tx_ctrl_policy = sr_addr(SR_TX_CTRL + 3); + x.tx_ctrl_cycles_per_up = sr_addr(SR_TX_CTRL + 4); + x.tx_ctrl_packets_per_up = sr_addr(SR_TX_CTRL + 5); + + return x; +} diff --git a/host/lib/usrp/usrp2/usrp2_regs.hpp b/host/lib/usrp/usrp2/usrp2_regs.hpp new file mode 100644 index 000000000..e7803d9ee --- /dev/null +++ b/host/lib/usrp/usrp2/usrp2_regs.hpp @@ -0,0 +1,273 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP2_REGS_HPP +#define INCLUDED_USRP2_REGS_HPP + +typedef struct { + int misc_ctrl_clock; + int misc_ctrl_serdes; + int misc_ctrl_adc; + int misc_ctrl_leds; + int misc_ctrl_phy; + int misc_ctrl_dbg_mux; + int misc_ctrl_ram_page; + int misc_ctrl_flush_icache; + int misc_ctrl_led_src; + int time64_secs; // value to set absolute secs to on next PPS + int time64_ticks; // value to set absolute ticks to on next PPS + int time64_flags; // flags -- see chart below + int time64_imm; // set immediate (0=latch on next pps, 1=latch immediate, default=0) + int time64_tps; // ticks per second rollover count + int time64_mimo_sync; + int status; + int time64_secs_rb_imm; + int time64_ticks_rb_imm; + int time64_secs_rb_pps; + int time64_ticks_rb_pps; + int compat_num_rb; + int dsp_tx_freq; + int dsp_tx_scale_iq; + int dsp_tx_interp_rate; + int dsp_tx_mux; + struct{ + int freq; + int scale_iq; + int decim_rate; + int dcoffset_i; + int dcoffset_q; + int mux; + } dsp_rx[2]; + int gpio_base; + int gpio_io; + int gpio_ddr; + int gpio_tx_sel; + int gpio_rx_sel; + int atr_base; + int atr_idle_txside; + int atr_idle_rxside; + int atr_intx_txside; + int atr_intx_rxside; + int atr_inrx_txside; + int atr_inrx_rxside; + int atr_full_txside; + int atr_full_rxside; + struct{ + int stream_cmd; + int time_secs; + int time_ticks; + int clear_overrun; + int vrt_header; + int vrt_stream_id; + int vrt_trailer; + int nsamps_per_pkt; + int nchannels; + } rx_ctrl[2]; + int tx_ctrl_num_chan; + int tx_ctrl_clear_state; + int tx_ctrl_report_sid; + int tx_ctrl_policy; + int tx_ctrl_cycles_per_up; + int tx_ctrl_packets_per_up; +} usrp2_regs_t; + +extern const usrp2_regs_t usrp2_regs; //the register definitions, set in usrp2_regs.cpp and usrp2p_regs.cpp + +usrp2_regs_t usrp2_get_regs(bool); + +//////////////////////////////////////////////////// +// Settings Bus, Slave #7, Not Byte Addressable! +// +// Output-only from processor point-of-view. +// 1KB of address space (== 256 32-bit write-only regs) + + +//#define MISC_OUTPUT_BASE 0xD400 +//#define TX_PROTOCOL_ENGINE_BASE 0xD480 +//#define RX_PROTOCOL_ENGINE_BASE 0xD4C0 +//#define BUFFER_POOL_CTRL_BASE 0xD500 +//#define LAST_SETTING_REG 0xD7FC // last valid setting register + +///////////////////////////////////////////////// +// SPI Slave Constants +//////////////////////////////////////////////// +// Masks for controlling different peripherals +#define SPI_SS_AD9510 1 +#define SPI_SS_AD9777 2 +#define SPI_SS_RX_DAC 4 +#define SPI_SS_RX_ADC 8 +#define SPI_SS_RX_DB 16 +#define SPI_SS_TX_DAC 32 +#define SPI_SS_TX_ADC 64 +#define SPI_SS_TX_DB 128 +#define SPI_SS_ADS62P44 256 //for usrp2p + +///////////////////////////////////////////////// +// Misc Control +//////////////////////////////////////////////// +#define U2_FLAG_MISC_CTRL_SERDES_ENABLE 8 +#define U2_FLAG_MISC_CTRL_SERDES_PRBSEN 4 +#define U2_FLAG_MISC_CTRL_SERDES_LOOPEN 2 +#define U2_FLAG_MISC_CTRL_SERDES_RXEN 1 + +#define U2_FLAG_MISC_CTRL_ADC_ON 0x0F +#define U2_FLAG_MISC_CTRL_ADC_OFF 0x00 + +///////////////////////////////////////////////// +// VITA49 64 bit time (write only) +//////////////////////////////////////////////// + /*! + * \brief Time 64 flags + * + * <pre> + * + * 3 2 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-----------------------------------------------------------+-+-+ + * | |S|P| + * +-----------------------------------------------------------+-+-+ + * + * P - PPS edge selection (0=negedge, 1=posedge, default=0) + * S - Source (0=sma, 1=mimo, 0=default) + * + * </pre> + */ + +//pps flags (see above) +#define U2_FLAG_TIME64_PPS_NEGEDGE (0 << 0) +#define U2_FLAG_TIME64_PPS_POSEDGE (1 << 0) +#define U2_FLAG_TIME64_PPS_SMA (0 << 1) +#define U2_FLAG_TIME64_PPS_MIMO (1 << 1) + +#define U2_FLAG_TIME64_LATCH_NOW 1 +#define U2_FLAG_TIME64_LATCH_NEXT_PPS 0 + +///////////////////////////////////////////////// +// DSP TX Regs +//////////////////////////////////////////////// + + /*! + * \brief output mux configuration. + * + * <pre> + * 3 2 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-------------------------------+-------+-------+-------+-------+ + * | | DAC1 | DAC0 | + * +-------------------------------+-------+-------+-------+-------+ + * + * There are N DUCs (1 now) with complex inputs and outputs. + * There are two DACs. + * + * Each 4-bit DACx field specifies the source for the DAC + * Each subfield is coded like this: + * + * 3 2 1 0 + * +-------+ + * | N | + * +-------+ + * + * N specifies which DUC output is connected to this DAC. + * + * N which interp output + * --- ------------------- + * 0 DUC 0 I + * 1 DUC 0 Q + * 2 DUC 1 I + * 3 DUC 1 Q + * F All Zeros + * + * The default value is 0x10 + * </pre> + */ + + +///////////////////////////////////////////////// +// DSP RX Regs +//////////////////////////////////////////////// + + /*! + * \brief input mux configuration. + * + * This determines which ADC (or constant zero) is connected to + * each DDC input. There are N DDCs (1 now). Each has two inputs. + * + * <pre> + * Mux value: + * + * 3 2 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | |Q0 |I0 | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * + * Each 2-bit I field is either 00 (A/D A), 01 (A/D B) or 1X (const zero) + * Each 2-bit Q field is either 00 (A/D A), 01 (A/D B) or 1X (const zero) + * + * The default value is 0x4 + * </pre> + */ + +//////////////////////////////////////////////// +// GPIO, Slave 4 +//////////////////////////////////////////////// + +// each 2-bit sel field is layed out this way +#define U2_FLAG_GPIO_SEL_GPIO 0 // if pin is an output, set by GPIO register +#define U2_FLAG_GPIO_SEL_ATR 1 // if pin is an output, set by ATR logic +#define U2_FLAG_GPIO_SEL_DEBUG_0 2 // if pin is an output, debug lines from FPGA fabric +#define U2_FLAG_GPIO_SEL_DEBUG_1 3 // if pin is an output, debug lines from FPGA fabric + +/////////////////////////////////////////////////// +// ATR Controller, Slave 11 +//////////////////////////////////////////////// + + +/////////////////////////////////////////////////// +// RX CTRL regs +/////////////////////////////////////////////////// +// The following 3 are logically a single command register. +// They are clocked into the underlying fifo when time_ticks is written. +//#define U2_REG_RX_CTRL_STREAM_CMD _SR_ADDR(SR_RX_CTRL + 0) // {now, chain, num_samples(30) +//#define U2_REG_RX_CTRL_TIME_SECS _SR_ADDR(SR_RX_CTRL + 1) +//#define U2_REG_RX_CTRL_TIME_TICKS _SR_ADDR(SR_RX_CTRL + 2) + +//#define U2_REG_RX_CTRL_CLEAR_STATE _SR_ADDR(SR_RX_CTRL + 3) +//#define U2_REG_RX_CTRL_VRT_HEADER _SR_ADDR(SR_RX_CTRL + 4) // word 0 of packet. FPGA fills in packet counter +//#define U2_REG_RX_CTRL_VRT_STREAM_ID _SR_ADDR(SR_RX_CTRL + 5) // word 1 of packet. +//#define U2_REG_RX_CTRL_VRT_TRAILER _SR_ADDR(SR_RX_CTRL + 6) +//#define U2_REG_RX_CTRL_NSAMPS_PER_PKT _SR_ADDR(SR_RX_CTRL + 7) +//#define U2_REG_RX_CTRL_NCHANNELS _SR_ADDR(SR_RX_CTRL + 8) // 1 in basic case, up to 4 for vector sources + +/////////////////////////////////////////////////// +// TX CTRL regs +/////////////////////////////////////////////////// +//#define U2_REG_TX_CTRL_NUM_CHAN _SR_ADDR(SR_TX_CTRL + 0) +//#define U2_REG_TX_CTRL_CLEAR_STATE _SR_ADDR(SR_TX_CTRL + 1) +//#define U2_REG_TX_CTRL_REPORT_SID _SR_ADDR(SR_TX_CTRL + 2) +//#define U2_REG_TX_CTRL_POLICY _SR_ADDR(SR_TX_CTRL + 3) +//#define U2_REG_TX_CTRL_CYCLES_PER_UP _SR_ADDR(SR_TX_CTRL + 4) +//#define U2_REG_TX_CTRL_PACKETS_PER_UP _SR_ADDR(SR_TX_CTRL + 5) + +#define U2_FLAG_TX_CTRL_POLICY_WAIT (0x1 << 0) +#define U2_FLAG_TX_CTRL_POLICY_NEXT_PACKET (0x1 << 1) +#define U2_FLAG_TX_CTRL_POLICY_NEXT_BURST (0x1 << 2) + +//enable flag for registers: cycles and packets per update packet +#define U2_FLAG_TX_CTRL_UP_ENB (1ul << 31) + +#endif /* INCLUDED_USRP2_REGS_HPP */ diff --git a/host/lib/usrp/usrp_e100/CMakeLists.txt b/host/lib/usrp/usrp_e100/CMakeLists.txt new file mode 100644 index 000000000..acbac177e --- /dev/null +++ b/host/lib/usrp/usrp_e100/CMakeLists.txt @@ -0,0 +1,53 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# This file included, use CMake directory variables +######################################################################## + +######################################################################## +# Conditionally configure the USRP-E100 support +######################################################################## +IF(CMAKE_SYSTEM_NAME STREQUAL "Linux") + SET(LINUX_TARGET TRUE) +ENDIF(CMAKE_SYSTEM_NAME STREQUAL "Linux") + +LIBUHD_REGISTER_COMPONENT("USRP-E100" ENABLE_USRP_E100 OFF "ENABLE_LIBUHD;LINUX_TARGET" OFF) + +IF(ENABLE_USRP_E100) + INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}/include) + + LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/clock_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/clock_ctrl.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/codec_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/codec_ctrl.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/codec_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dboard_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dboard_iface.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dsp_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/fpga_downloader.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/io_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/mboard_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp_e100_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp_e100_impl.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp_e100_iface.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp_e100_iface.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp_e100_mmap_zero_copy.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp_e100_regs.hpp + ) +ENDIF(ENABLE_USRP_E100) diff --git a/host/lib/usrp/usrp_e100/clock_ctrl.cpp b/host/lib/usrp/usrp_e100/clock_ctrl.cpp new file mode 100644 index 000000000..bb6fb7e3b --- /dev/null +++ b/host/lib/usrp/usrp_e100/clock_ctrl.cpp @@ -0,0 +1,465 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "clock_ctrl.hpp" +#include "ad9522_regs.hpp" +#include <uhd/utils/assert_has.hpp> +#include <boost/cstdint.hpp> +#include "usrp_e100_regs.hpp" //spi slave constants +#include <boost/assign/list_of.hpp> +#include <boost/foreach.hpp> +#include <boost/format.hpp> +#include <boost/thread/thread.hpp> +#include <boost/math/common_factor_rt.hpp> //gcd +#include <algorithm> +#include <utility> +#include <iostream> + +using namespace uhd; + +/*********************************************************************** + * Constants + **********************************************************************/ +static const bool CLOCK_SETTINGS_DEBUG = false; +static const bool ENABLE_THE_TEST_OUT = true; +static const double REFERENCE_INPUT_RATE = 10e6; +static const double DEFAULT_OUTPUT_RATE = 64e6; + +/*********************************************************************** + * Helpers + **********************************************************************/ +template <typename div_type, typename bypass_type> static void set_clock_divider( + size_t divider, div_type &low, div_type &high, bypass_type &bypass +){ + high = divider/2 - 1; + low = divider - high - 2; + bypass = (divider == 1)? 1 : 0; +} + +/*********************************************************************** + * Clock rate calculation stuff: + * Using the internal VCO between 1400 and 1800 MHz + **********************************************************************/ +struct clock_settings_type{ + size_t ref_clock_doubler, r_counter, a_counter, b_counter, prescaler, vco_divider, chan_divider; + size_t get_n_counter(void) const{return prescaler * b_counter + a_counter;} + double get_ref_rate(void) const{return REFERENCE_INPUT_RATE * ref_clock_doubler;} + double get_vco_rate(void) const{return get_ref_rate()/r_counter * get_n_counter();} + double get_chan_rate(void) const{return get_vco_rate()/vco_divider;} + double get_out_rate(void) const{return get_chan_rate()/chan_divider;} + std::string to_pp_string(void) const{ + return str(boost::format( + " r_counter: %d\n" + " a_counter: %d\n" + " b_counter: %d\n" + " prescaler: %d\n" + " vco_divider: %d\n" + " chan_divider: %d\n" + " vco_rate: %fMHz\n" + " chan_rate: %fMHz\n" + " out_rate: %fMHz\n" + ) + % r_counter + % a_counter + % b_counter + % prescaler + % vco_divider + % chan_divider + % (get_vco_rate()/1e6) + % (get_chan_rate()/1e6) + % (get_out_rate()/1e6) + ); + } +}; + +//! gives the greatest divisor of num between 1 and max inclusive +template<typename T> static inline T greatest_divisor(T num, T max){ + for (T i = max; i > 1; i--) if (num%i == 0) return i; return 1; +} + +//! gives the least divisor of num between min and num exclusive +template<typename T> static inline T least_divisor(T num, T min){ + for (T i = min; i < num; i++) if (num%i == 0) return i; return 1; +} + +static clock_settings_type get_clock_settings(double rate){ + clock_settings_type cs; + cs.ref_clock_doubler = 2; //always doubling + cs.prescaler = 8; //set to 8 when input is under 2400 MHz + + //basic formulas used below: + //out_rate*X = ref_rate*Y + //X = i*ref_rate/gcd + //Y = i*out_rate/gcd + //X = chan_div * vco_div * R + //Y = P*B + A + + const boost::uint64_t out_rate = boost::uint64_t(rate); + const boost::uint64_t ref_rate = boost::uint64_t(cs.get_ref_rate()); + const size_t gcd = size_t(boost::math::gcd(ref_rate, out_rate)); + + for (size_t i = 1; i <= 100; i++){ + const size_t X = i*ref_rate/gcd; + const size_t Y = i*out_rate/gcd; + + //determine A and B (P is fixed) + cs.b_counter = Y/cs.prescaler; + cs.a_counter = Y - cs.b_counter*cs.prescaler; + + static const double vco_bound_pad = 100e6; + for ( //calculate an r divider that fits into the bounds of the vco + cs.r_counter = size_t(cs.get_n_counter()*cs.get_ref_rate()/(1800e6 - vco_bound_pad)); + cs.r_counter <= size_t(cs.get_n_counter()*cs.get_ref_rate()/(1400e6 + vco_bound_pad)) + and cs.r_counter > 0; cs.r_counter++ + ){ + + //determine chan_div and vco_div + //and fill in that order of preference + cs.chan_divider = greatest_divisor<size_t>(X/cs.r_counter, 32); + cs.vco_divider = greatest_divisor<size_t>(X/cs.chan_divider/cs.r_counter, 6); + + //avoid a vco divider of 1 (if possible) + if (cs.vco_divider == 1){ + cs.vco_divider = least_divisor<size_t>(cs.chan_divider, 2); + cs.chan_divider /= cs.vco_divider; + } + + if (CLOCK_SETTINGS_DEBUG){ + std::cout << "gcd " << gcd << std::endl; + std::cout << "X " << X << std::endl; + std::cout << "Y " << Y << std::endl; + std::cout << cs.to_pp_string() << std::endl; + } + + //filter limits on the counters + if (cs.vco_divider == 1) continue; + if (cs.r_counter >= (1<<14)) continue; + if (cs.b_counter == 2) continue; + if (cs.b_counter == 1 and cs.a_counter != 0) continue; + if (cs.b_counter >= (1<<13)) continue; + if (cs.a_counter >= (1<<6)) continue; + + std::cout << "USRP-E100 clock control: " << i << std::endl << cs.to_pp_string() << std::endl; + return cs; + } + } + + throw uhd::value_error(str(boost::format( + "USRP-E100 clock control: could not calculate settings for clock rate %fMHz" + ) % (rate/1e6))); +} + +/*********************************************************************** + * Clock Control Implementation + **********************************************************************/ +class usrp_e100_clock_ctrl_impl : public usrp_e100_clock_ctrl{ +public: + usrp_e100_clock_ctrl_impl(usrp_e100_iface::sptr iface){ + _iface = iface; + _chan_rate = 0.0; + _out_rate = 0.0; + + //init the clock gen registers + //Note: out0 should already be clocking the FPGA or this isnt going to work + _ad9522_regs.sdo_active = ad9522_regs_t::SDO_ACTIVE_SDO_SDIO; + _ad9522_regs.enb_stat_eeprom_at_stat_pin = 0; //use status pin + _ad9522_regs.status_pin_control = 0x1; //n divider + _ad9522_regs.ld_pin_control = 0x00; //dld + _ad9522_regs.refmon_pin_control = 0x12; //show ref2 + _ad9522_regs.lock_detect_counter = ad9522_regs_t::LOCK_DETECT_COUNTER_16CYC; + + this->use_internal_ref(); + + this->set_fpga_clock_rate(DEFAULT_OUTPUT_RATE); //initialize to something + + this->enable_test_clock(ENABLE_THE_TEST_OUT); + this->enable_rx_dboard_clock(false); + this->enable_tx_dboard_clock(false); + } + + ~usrp_e100_clock_ctrl_impl(void){ + this->enable_test_clock(ENABLE_THE_TEST_OUT); + this->enable_rx_dboard_clock(false); + this->enable_tx_dboard_clock(false); + } + + /*********************************************************************** + * Clock rate control: + * - set clock rate w/ internal VCO + * - set clock rate w/ external VCXO + **********************************************************************/ + void set_clock_settings_with_internal_vco(double rate){ + const clock_settings_type cs = get_clock_settings(rate); + + //set the rates to private variables so the implementation knows! + _chan_rate = cs.get_chan_rate(); + _out_rate = cs.get_out_rate(); + + _ad9522_regs.enable_clock_doubler = (cs.ref_clock_doubler == 2)? 1 : 0; + + _ad9522_regs.set_r_counter(cs.r_counter); + _ad9522_regs.a_counter = cs.a_counter; + _ad9522_regs.set_b_counter(cs.b_counter); + UHD_ASSERT_THROW(cs.prescaler == 8); //assumes this below: + _ad9522_regs.prescaler_p = ad9522_regs_t::PRESCALER_P_DIV8_9; + + _ad9522_regs.pll_power_down = ad9522_regs_t::PLL_POWER_DOWN_NORMAL; + _ad9522_regs.cp_current = ad9522_regs_t::CP_CURRENT_1_2MA; + + _ad9522_regs.bypass_vco_divider = 0; + switch(cs.vco_divider){ + case 1: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV1; break; + case 2: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV2; break; + case 3: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV3; break; + case 4: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV4; break; + case 5: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV5; break; + case 6: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV6; break; + } + _ad9522_regs.select_vco_or_clock = ad9522_regs_t::SELECT_VCO_OR_CLOCK_VCO; + + //setup fpga master clock + _ad9522_regs.out0_format = ad9522_regs_t::OUT0_FORMAT_LVDS; + set_clock_divider(cs.chan_divider, + _ad9522_regs.divider0_low_cycles, + _ad9522_regs.divider0_high_cycles, + _ad9522_regs.divider0_bypass + ); + + //setup codec clock + _ad9522_regs.out3_format = ad9522_regs_t::OUT3_FORMAT_LVDS; + set_clock_divider(cs.chan_divider, + _ad9522_regs.divider1_low_cycles, + _ad9522_regs.divider1_high_cycles, + _ad9522_regs.divider1_bypass + ); + + this->send_all_regs(); + calibrate_now(); + } + + void set_clock_settings_with_external_vcxo(double rate){ + //set the rates to private variables so the implementation knows! + _chan_rate = rate; + _out_rate = rate; + + _ad9522_regs.enable_clock_doubler = 1; //doubler always on + const double ref_rate = REFERENCE_INPUT_RATE*2; + + //bypass prescaler such that N = B + long gcd = boost::math::gcd(long(ref_rate), long(rate)); + _ad9522_regs.set_r_counter(int(ref_rate/gcd)); + _ad9522_regs.a_counter = 0; + _ad9522_regs.set_b_counter(int(rate/gcd)); + _ad9522_regs.prescaler_p = ad9522_regs_t::PRESCALER_P_DIV1; + + //setup external vcxo + _ad9522_regs.pll_power_down = ad9522_regs_t::PLL_POWER_DOWN_NORMAL; + _ad9522_regs.cp_current = ad9522_regs_t::CP_CURRENT_1_2MA; + _ad9522_regs.bypass_vco_divider = 1; + _ad9522_regs.select_vco_or_clock = ad9522_regs_t::SELECT_VCO_OR_CLOCK_EXTERNAL; + + //setup fpga master clock + _ad9522_regs.out0_format = ad9522_regs_t::OUT0_FORMAT_LVDS; + _ad9522_regs.divider0_bypass = 1; + + //setup codec clock + _ad9522_regs.out3_format = ad9522_regs_t::OUT3_FORMAT_LVDS; + _ad9522_regs.divider1_bypass = 1; + + this->send_all_regs(); + } + + void set_fpga_clock_rate(double rate){ + if (_out_rate == rate) return; + if (rate == 61.44e6) set_clock_settings_with_external_vcxo(rate); + else set_clock_settings_with_internal_vco(rate); + } + + double get_fpga_clock_rate(void){ + return this->_out_rate; + } + + /*********************************************************************** + * Special test clock output + **********************************************************************/ + void enable_test_clock(bool enb){ + //setup test clock (same divider as codec clock) + _ad9522_regs.out4_format = ad9522_regs_t::OUT4_FORMAT_CMOS; + _ad9522_regs.out4_cmos_configuration = (enb)? + ad9522_regs_t::OUT4_CMOS_CONFIGURATION_A_ON : + ad9522_regs_t::OUT4_CMOS_CONFIGURATION_OFF; + this->send_reg(0x0F0); + this->latch_regs(); + } + + /*********************************************************************** + * RX Dboard Clock Control (output 9, divider 3) + **********************************************************************/ + void enable_rx_dboard_clock(bool enb){ + _ad9522_regs.out9_format = ad9522_regs_t::OUT9_FORMAT_CMOS; + _ad9522_regs.out9_cmos_configuration = (enb)? + ad9522_regs_t::OUT9_CMOS_CONFIGURATION_B_ON : + ad9522_regs_t::OUT9_CMOS_CONFIGURATION_OFF; + this->send_reg(0x0F9); + this->latch_regs(); + } + + std::vector<double> get_rx_dboard_clock_rates(void){ + std::vector<double> rates; + for(size_t div = 1; div <= 16+16; div++) + rates.push_back(this->_chan_rate/div); + return rates; + } + + void set_rx_dboard_clock_rate(double rate){ + assert_has(get_rx_dboard_clock_rates(), rate, "rx dboard clock rate"); + size_t divider = size_t(this->_chan_rate/rate); + //set the divider registers + set_clock_divider(divider, + _ad9522_regs.divider3_low_cycles, + _ad9522_regs.divider3_high_cycles, + _ad9522_regs.divider3_bypass + ); + this->send_reg(0x199); + this->send_reg(0x19a); + this->latch_regs(); + } + + /*********************************************************************** + * TX Dboard Clock Control (output 6, divider 2) + **********************************************************************/ + void enable_tx_dboard_clock(bool enb){ + _ad9522_regs.out6_format = ad9522_regs_t::OUT6_FORMAT_CMOS; + _ad9522_regs.out6_cmos_configuration = (enb)? + ad9522_regs_t::OUT6_CMOS_CONFIGURATION_B_ON : + ad9522_regs_t::OUT6_CMOS_CONFIGURATION_OFF; + this->send_reg(0x0F6); + this->latch_regs(); + } + + std::vector<double> get_tx_dboard_clock_rates(void){ + return get_rx_dboard_clock_rates(); //same master clock, same dividers... + } + + void set_tx_dboard_clock_rate(double rate){ + assert_has(get_tx_dboard_clock_rates(), rate, "tx dboard clock rate"); + size_t divider = size_t(this->_chan_rate/rate); + //set the divider registers + set_clock_divider(divider, + _ad9522_regs.divider2_low_cycles, + _ad9522_regs.divider2_high_cycles, + _ad9522_regs.divider2_bypass + ); + this->send_reg(0x196); + this->send_reg(0x197); + this->latch_regs(); + } + + /*********************************************************************** + * Clock reference control + **********************************************************************/ + void use_internal_ref(void) { + _ad9522_regs.enable_ref2 = 1; + _ad9522_regs.enable_ref1 = 0; + _ad9522_regs.select_ref = ad9522_regs_t::SELECT_REF_REF2; + _ad9522_regs.enb_auto_ref_switchover = ad9522_regs_t::ENB_AUTO_REF_SWITCHOVER_MANUAL; + this->send_reg(0x01C); + } + + void use_external_ref(void) { + _ad9522_regs.enable_ref2 = 0; + _ad9522_regs.enable_ref1 = 1; + _ad9522_regs.select_ref = ad9522_regs_t::SELECT_REF_REF1; + _ad9522_regs.enb_auto_ref_switchover = ad9522_regs_t::ENB_AUTO_REF_SWITCHOVER_MANUAL; + this->send_reg(0x01C); + } + + void use_auto_ref(void) { + _ad9522_regs.enable_ref2 = 1; + _ad9522_regs.enable_ref1 = 1; + _ad9522_regs.select_ref = ad9522_regs_t::SELECT_REF_REF1; + _ad9522_regs.enb_auto_ref_switchover = ad9522_regs_t::ENB_AUTO_REF_SWITCHOVER_AUTO; + } + +private: + usrp_e100_iface::sptr _iface; + ad9522_regs_t _ad9522_regs; + double _out_rate; //rate at the fpga and codec + double _chan_rate; //rate before final dividers + + void latch_regs(void){ + _ad9522_regs.io_update = 1; + this->send_reg(0x232); + } + + void send_reg(boost::uint16_t addr){ + boost::uint32_t reg = _ad9522_regs.get_write_reg(addr); + //std::cout << "clock control write reg: " << std::hex << reg << std::endl; + _iface->write_spi( + UE_SPI_SS_AD9522, + spi_config_t::EDGE_RISE, + reg, 24 + ); + } + + void calibrate_now(void){ + //vco calibration routine: + _ad9522_regs.vco_calibration_now = 0; + this->send_reg(0x18); + this->latch_regs(); + _ad9522_regs.vco_calibration_now = 1; + this->send_reg(0x18); + this->latch_regs(); + //wait for calibration done: + static const boost::uint8_t addr = 0x01F; + for (size_t ms10 = 0; ms10 < 100; ms10++){ + boost::uint32_t reg = _iface->read_spi( + UE_SPI_SS_AD9522, spi_config_t::EDGE_RISE, + _ad9522_regs.get_read_reg(addr), 24 + ); + _ad9522_regs.set_reg(addr, reg); + if (_ad9522_regs.vco_calibration_finished) return; + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); + } + std::cerr << "USRP-E100 clock control: VCO calibration timeout" << std::endl; + } + + void send_all_regs(void){ + //setup a list of register ranges to write + typedef std::pair<boost::uint16_t, boost::uint16_t> range_t; + static const std::vector<range_t> ranges = boost::assign::list_of + (range_t(0x000, 0x000)) (range_t(0x010, 0x01F)) + (range_t(0x0F0, 0x0FD)) (range_t(0x190, 0x19B)) + (range_t(0x1E0, 0x1E1)) (range_t(0x230, 0x230)) + ; + + //write initial register values and latch/update + BOOST_FOREACH(const range_t &range, ranges){ + for(boost::uint16_t addr = range.first; addr <= range.second; addr++){ + this->send_reg(addr); + } + } + this->latch_regs(); + } +}; + +/*********************************************************************** + * Clock Control Make + **********************************************************************/ +usrp_e100_clock_ctrl::sptr usrp_e100_clock_ctrl::make(usrp_e100_iface::sptr iface){ + return sptr(new usrp_e100_clock_ctrl_impl(iface)); +} diff --git a/host/lib/usrp/usrp_e100/clock_ctrl.hpp b/host/lib/usrp/usrp_e100/clock_ctrl.hpp new file mode 100644 index 000000000..1f9960ce4 --- /dev/null +++ b/host/lib/usrp/usrp_e100/clock_ctrl.hpp @@ -0,0 +1,110 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP_E100_CLOCK_CTRL_HPP +#define INCLUDED_USRP_E100_CLOCK_CTRL_HPP + +#include "usrp_e100_iface.hpp" +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include <vector> + +/*! + * The usrp-e clock control: + * - Setup system clocks. + * - Disable/enable clock lines. + */ +class usrp_e100_clock_ctrl : boost::noncopyable{ +public: + typedef boost::shared_ptr<usrp_e100_clock_ctrl> sptr; + + /*! + * Make a new clock control object. + * \param iface the usrp_e100 iface object + * \return the clock control object + */ + static sptr make(usrp_e100_iface::sptr iface); + + /*! + * Set the rate of the fpga clock line. + * Throws if rate is not valid. + * \param rate the new rate in Hz + */ + virtual void set_fpga_clock_rate(double rate) = 0; + + /*! + * Get the rate of the fpga clock line. + * \return the fpga clock rate in Hz + */ + virtual double get_fpga_clock_rate(void) = 0; + + /*! + * Get the possible rates of the rx dboard clock. + * \return a vector of clock rates in Hz + */ + virtual std::vector<double> get_rx_dboard_clock_rates(void) = 0; + + /*! + * Get the possible rates of the tx dboard clock. + * \return a vector of clock rates in Hz + */ + virtual std::vector<double> get_tx_dboard_clock_rates(void) = 0; + + /*! + * Set the rx dboard clock rate to a possible rate. + * \param rate the new clock rate in Hz + * \throw exception when rate cannot be achieved + */ + virtual void set_rx_dboard_clock_rate(double rate) = 0; + + /*! + * Set the tx dboard clock rate to a possible rate. + * \param rate the new clock rate in Hz + * \throw exception when rate cannot be achieved + */ + virtual void set_tx_dboard_clock_rate(double rate) = 0; + + /*! + * Enable/disable the rx dboard clock. + * \param enb true to enable + */ + virtual void enable_rx_dboard_clock(bool enb) = 0; + + /*! + * Enable/disable the tx dboard clock. + * \param enb true to enable + */ + virtual void enable_tx_dboard_clock(bool enb) = 0; + + /*! + * Use the internal TCXO reference + */ + virtual void use_internal_ref(void) = 0; + + /*! + * Use the external SMA reference + */ + virtual void use_external_ref(void) = 0; + + /*! + * Use external if available, internal otherwise + */ + virtual void use_auto_ref(void) = 0; + +}; + +#endif /* INCLUDED_USRP_E100_CLOCK_CTRL_HPP */ diff --git a/host/lib/usrp/usrp_e100/codec_ctrl.cpp b/host/lib/usrp/usrp_e100/codec_ctrl.cpp new file mode 100644 index 000000000..50442546a --- /dev/null +++ b/host/lib/usrp/usrp_e100/codec_ctrl.cpp @@ -0,0 +1,296 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "codec_ctrl.hpp" +#include "ad9862_regs.hpp" +#include <uhd/types/dict.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/algorithm.hpp> +#include <boost/cstdint.hpp> +#include <boost/tuple/tuple.hpp> +#include <boost/math/special_functions/round.hpp> +#include "usrp_e100_regs.hpp" //spi slave constants +#include <boost/assign/list_of.hpp> +#include <iostream> + +using namespace uhd; + +static const bool codec_debug = false; + +const gain_range_t usrp_e100_codec_ctrl::tx_pga_gain_range(-20, 0, double(0.1)); +const gain_range_t usrp_e100_codec_ctrl::rx_pga_gain_range(0, 20, 1); + +/*********************************************************************** + * Codec Control Implementation + **********************************************************************/ +class usrp_e100_codec_ctrl_impl : public usrp_e100_codec_ctrl{ +public: + //structors + usrp_e100_codec_ctrl_impl(usrp_e100_iface::sptr iface); + ~usrp_e100_codec_ctrl_impl(void); + + //aux adc and dac control + double read_aux_adc(aux_adc_t which); + void write_aux_dac(aux_dac_t which, double volts); + + //pga gain control + void set_tx_pga_gain(double); + double get_tx_pga_gain(void); + void set_rx_pga_gain(double, char); + double get_rx_pga_gain(char); + +private: + usrp_e100_iface::sptr _iface; + ad9862_regs_t _ad9862_regs; + aux_adc_t _last_aux_adc_a, _last_aux_adc_b; + void send_reg(boost::uint8_t addr); + void recv_reg(boost::uint8_t addr); +}; + +/*********************************************************************** + * Codec Control Structors + **********************************************************************/ +usrp_e100_codec_ctrl_impl::usrp_e100_codec_ctrl_impl(usrp_e100_iface::sptr iface){ + _iface = iface; + + //soft reset + _ad9862_regs.soft_reset = 1; + this->send_reg(0); + + //initialize the codec register settings + _ad9862_regs.sdio_bidir = ad9862_regs_t::SDIO_BIDIR_SDIO_SDO; + _ad9862_regs.lsb_first = ad9862_regs_t::LSB_FIRST_MSB; + _ad9862_regs.soft_reset = 0; + + //setup rx side of codec + _ad9862_regs.byp_buffer_a = 1; + _ad9862_regs.byp_buffer_b = 1; + _ad9862_regs.buffer_a_pd = 1; + _ad9862_regs.buffer_b_pd = 1; + _ad9862_regs.rx_pga_a = 0;//0x1f; //TODO bring under api control + _ad9862_regs.rx_pga_b = 0;//0x1f; //TODO bring under api control + _ad9862_regs.rx_twos_comp = 1; + _ad9862_regs.rx_hilbert = ad9862_regs_t::RX_HILBERT_DIS; + + //setup tx side of codec + _ad9862_regs.two_data_paths = ad9862_regs_t::TWO_DATA_PATHS_BOTH; + _ad9862_regs.interleaved = ad9862_regs_t::INTERLEAVED_INTERLEAVED; + _ad9862_regs.tx_retime = ad9862_regs_t::TX_RETIME_CLKOUT2; + _ad9862_regs.tx_pga_gain = 199; //TODO bring under api control + _ad9862_regs.tx_hilbert = ad9862_regs_t::TX_HILBERT_DIS; + _ad9862_regs.interp = ad9862_regs_t::INTERP_2; + _ad9862_regs.tx_twos_comp = 1; + _ad9862_regs.fine_mode = ad9862_regs_t::FINE_MODE_BYPASS; + _ad9862_regs.coarse_mod = ad9862_regs_t::COARSE_MOD_BYPASS; + _ad9862_regs.dac_a_coarse_gain = 0x3; + _ad9862_regs.dac_b_coarse_gain = 0x3; + _ad9862_regs.edges = ad9862_regs_t::EDGES_NORMAL; + + //setup the dll + _ad9862_regs.input_clk_ctrl = ad9862_regs_t::INPUT_CLK_CTRL_EXTERNAL; + _ad9862_regs.dll_mult = ad9862_regs_t::DLL_MULT_2; + _ad9862_regs.dll_mode = ad9862_regs_t::DLL_MODE_FAST; + + //write the register settings to the codec + for (uint8_t addr = 0; addr <= 25; addr++){ + this->send_reg(addr); + } + + //aux adc clock + _ad9862_regs.clk_4 = ad9862_regs_t::CLK_4_1_4; + this->send_reg(34); +} + +usrp_e100_codec_ctrl_impl::~usrp_e100_codec_ctrl_impl(void){ + //set aux dacs to zero + this->write_aux_dac(AUX_DAC_A, 0); + this->write_aux_dac(AUX_DAC_B, 0); + this->write_aux_dac(AUX_DAC_C, 0); + this->write_aux_dac(AUX_DAC_D, 0); + + //power down + _ad9862_regs.all_rx_pd = 1; + this->send_reg(1); + _ad9862_regs.tx_digital_pd = 1; + _ad9862_regs.tx_analog_pd = ad9862_regs_t::TX_ANALOG_PD_BOTH; + this->send_reg(8); +} + +/*********************************************************************** + * Codec Control Gain Control Methods + **********************************************************************/ +static const int mtpgw = 255; //maximum tx pga gain word + +void usrp_e100_codec_ctrl_impl::set_tx_pga_gain(double gain){ + int gain_word = int(mtpgw*(gain - tx_pga_gain_range.start())/(tx_pga_gain_range.stop() - tx_pga_gain_range.start())); + _ad9862_regs.tx_pga_gain = uhd::clip(gain_word, 0, mtpgw); + this->send_reg(16); +} + +double usrp_e100_codec_ctrl_impl::get_tx_pga_gain(void){ + return (_ad9862_regs.tx_pga_gain*(tx_pga_gain_range.stop() - tx_pga_gain_range.start())/mtpgw) + tx_pga_gain_range.start(); +} + +static const int mrpgw = 0x14; //maximum rx pga gain word + +void usrp_e100_codec_ctrl_impl::set_rx_pga_gain(double gain, char which){ + int gain_word = int(mrpgw*(gain - rx_pga_gain_range.start())/(rx_pga_gain_range.stop() - rx_pga_gain_range.start())); + gain_word = uhd::clip(gain_word, 0, mrpgw); + switch(which){ + case 'A': + _ad9862_regs.rx_pga_a = gain_word; + this->send_reg(2); + return; + case 'B': + _ad9862_regs.rx_pga_b = gain_word; + this->send_reg(3); + return; + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +double usrp_e100_codec_ctrl_impl::get_rx_pga_gain(char which){ + int gain_word; + switch(which){ + case 'A': gain_word = _ad9862_regs.rx_pga_a; break; + case 'B': gain_word = _ad9862_regs.rx_pga_b; break; + default: UHD_THROW_INVALID_CODE_PATH(); + } + return (gain_word*(rx_pga_gain_range.stop() - rx_pga_gain_range.start())/mrpgw) + rx_pga_gain_range.start(); +} + +/*********************************************************************** + * Codec Control AUX ADC Methods + **********************************************************************/ +static double aux_adc_to_volts(boost::uint8_t high, boost::uint8_t low){ + return double((boost::uint16_t(high) << 2) | low)*3.3/0x3ff; +} + +double usrp_e100_codec_ctrl_impl::read_aux_adc(aux_adc_t which){ + //check to see if the switch needs to be set + bool write_switch = false; + switch(which){ + + case AUX_ADC_A1: + case AUX_ADC_A2: + if (which != _last_aux_adc_a){ + _ad9862_regs.select_a = (which == AUX_ADC_A1)? + ad9862_regs_t::SELECT_A_AUX_ADC1: ad9862_regs_t::SELECT_A_AUX_ADC2; + _last_aux_adc_a = which; + write_switch = true; + } + break; + + case AUX_ADC_B1: + case AUX_ADC_B2: + if (which != _last_aux_adc_b){ + _ad9862_regs.select_b = (which == AUX_ADC_B1)? + ad9862_regs_t::SELECT_B_AUX_ADC1: ad9862_regs_t::SELECT_B_AUX_ADC2; + _last_aux_adc_b = which; + write_switch = true; + } + break; + + } + + //write the switch if it changed + if(write_switch) this->send_reg(34); + + //map aux adcs to register values to read + static const uhd::dict<aux_adc_t, boost::uint8_t> aux_dac_to_addr = boost::assign::map_list_of + (AUX_ADC_A2, 26) (AUX_ADC_A1, 28) + (AUX_ADC_B2, 30) (AUX_ADC_B1, 32) + ; + + //read the value + this->recv_reg(aux_dac_to_addr[which]+0); + this->recv_reg(aux_dac_to_addr[which]+1); + + //return the value scaled to volts + switch(which){ + case AUX_ADC_A1: return aux_adc_to_volts(_ad9862_regs.aux_adc_a1_9_2, _ad9862_regs.aux_adc_a1_1_0); + case AUX_ADC_A2: return aux_adc_to_volts(_ad9862_regs.aux_adc_a2_9_2, _ad9862_regs.aux_adc_a2_1_0); + case AUX_ADC_B1: return aux_adc_to_volts(_ad9862_regs.aux_adc_b1_9_2, _ad9862_regs.aux_adc_b1_1_0); + case AUX_ADC_B2: return aux_adc_to_volts(_ad9862_regs.aux_adc_b2_9_2, _ad9862_regs.aux_adc_b2_1_0); + } + UHD_THROW_INVALID_CODE_PATH(); +} + +/*********************************************************************** + * Codec Control AUX DAC Methods + **********************************************************************/ +void usrp_e100_codec_ctrl_impl::write_aux_dac(aux_dac_t which, double volts){ + //special case for aux dac d (aka sigma delta word) + if (which == AUX_DAC_D){ + boost::uint16_t dac_word = uhd::clip(boost::math::iround(volts*0xfff/3.3), 0, 0xfff); + _ad9862_regs.sig_delt_11_4 = boost::uint8_t(dac_word >> 4); + _ad9862_regs.sig_delt_3_0 = boost::uint8_t(dac_word & 0xf); + this->send_reg(42); + this->send_reg(43); + return; + } + + //calculate the dac word for aux dac a, b, c + boost::uint8_t dac_word = uhd::clip(boost::math::iround(volts*0xff/3.3), 0, 0xff); + + //setup a lookup table for the aux dac params (reg ref, reg addr) + typedef boost::tuple<boost::uint8_t*, boost::uint8_t> dac_params_t; + uhd::dict<aux_dac_t, dac_params_t> aux_dac_to_params = boost::assign::map_list_of + (AUX_DAC_A, dac_params_t(&_ad9862_regs.aux_dac_a, 36)) + (AUX_DAC_B, dac_params_t(&_ad9862_regs.aux_dac_b, 37)) + (AUX_DAC_C, dac_params_t(&_ad9862_regs.aux_dac_c, 38)) + ; + + //set the aux dac register + UHD_ASSERT_THROW(aux_dac_to_params.has_key(which)); + boost::uint8_t *reg_ref, reg_addr; + boost::tie(reg_ref, reg_addr) = aux_dac_to_params[which]; + *reg_ref = dac_word; + this->send_reg(reg_addr); +} + +/*********************************************************************** + * Codec Control SPI Methods + **********************************************************************/ +void usrp_e100_codec_ctrl_impl::send_reg(boost::uint8_t addr){ + boost::uint32_t reg = _ad9862_regs.get_write_reg(addr); + if (codec_debug) std::cout << "codec control write reg: " << std::hex << reg << std::endl; + _iface->write_spi( + UE_SPI_SS_AD9862, + spi_config_t::EDGE_RISE, + reg, 16 + ); +} + +void usrp_e100_codec_ctrl_impl::recv_reg(boost::uint8_t addr){ + boost::uint32_t reg = _ad9862_regs.get_read_reg(addr); + if (codec_debug) std::cout << "codec control read reg: " << std::hex << reg << std::endl; + boost::uint32_t ret = _iface->read_spi( + UE_SPI_SS_AD9862, + spi_config_t::EDGE_RISE, + reg, 16 + ); + if (codec_debug) std::cout << "codec control read ret: " << std::hex << ret << std::endl; + _ad9862_regs.set_reg(addr, boost::uint16_t(ret)); +} + +/*********************************************************************** + * Codec Control Make + **********************************************************************/ +usrp_e100_codec_ctrl::sptr usrp_e100_codec_ctrl::make(usrp_e100_iface::sptr iface){ + return sptr(new usrp_e100_codec_ctrl_impl(iface)); +} diff --git a/host/lib/usrp/usrp_e100/codec_ctrl.hpp b/host/lib/usrp/usrp_e100/codec_ctrl.hpp new file mode 100644 index 000000000..05d7aab38 --- /dev/null +++ b/host/lib/usrp/usrp_e100/codec_ctrl.hpp @@ -0,0 +1,90 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP_E100_CODEC_CTRL_HPP +#define INCLUDED_USRP_E100_CODEC_CTRL_HPP + +#include "usrp_e100_iface.hpp" +#include <uhd/types/ranges.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> + +/*! + * The usrp-e codec control: + * - Init/power down codec. + * - Read aux adc, write aux dac. + */ +class usrp_e100_codec_ctrl : boost::noncopyable{ +public: + typedef boost::shared_ptr<usrp_e100_codec_ctrl> sptr; + + static const uhd::gain_range_t tx_pga_gain_range; + static const uhd::gain_range_t rx_pga_gain_range; + + /*! + * Make a new codec control object. + * \param iface the usrp_e100 iface object + * \return the codec control object + */ + static sptr make(usrp_e100_iface::sptr iface); + + //! aux adc identifier constants + enum aux_adc_t{ + AUX_ADC_A2 = 0xA2, + AUX_ADC_A1 = 0xA1, + AUX_ADC_B2 = 0xB2, + AUX_ADC_B1 = 0xB1 + }; + + /*! + * Read an auxiliary adc: + * The internals remember which aux adc was read last. + * Therefore, the aux adc switch is only changed as needed. + * \param which which of the 4 adcs + * \return a value in volts + */ + virtual double read_aux_adc(aux_adc_t which) = 0; + + //! aux dac identifier constants + enum aux_dac_t{ + AUX_DAC_A = 0xA, + AUX_DAC_B = 0xB, + AUX_DAC_C = 0xC, + AUX_DAC_D = 0xD //really the sigma delta output + }; + + /*! + * Write an auxiliary dac. + * \param which which of the 4 dacs + * \param volts the level in in volts + */ + virtual void write_aux_dac(aux_dac_t which, double volts) = 0; + + //! Set the TX PGA gain + virtual void set_tx_pga_gain(double gain) = 0; + + //! Get the TX PGA gain + virtual double get_tx_pga_gain(void) = 0; + + //! Set the RX PGA gain ('A' or 'B') + virtual void set_rx_pga_gain(double gain, char which) = 0; + + //! Get the RX PGA gain ('A' or 'B') + virtual double get_rx_pga_gain(char which) = 0; +}; + +#endif /* INCLUDED_USRP_E100_CODEC_CTRL_HPP */ diff --git a/host/lib/usrp/usrp_e100/codec_impl.cpp b/host/lib/usrp/usrp_e100/codec_impl.cpp new file mode 100644 index 000000000..ae198aaa5 --- /dev/null +++ b/host/lib/usrp/usrp_e100/codec_impl.cpp @@ -0,0 +1,149 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e100_impl.hpp" +#include <uhd/exception.hpp> +#include <uhd/usrp/codec_props.hpp> +#include <boost/bind.hpp> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * Helper Methods + **********************************************************************/ +void usrp_e100_impl::codec_init(void){ + //make proxies + _rx_codec_proxy = wax_obj_proxy::make( + boost::bind(&usrp_e100_impl::rx_codec_get, this, _1, _2), + boost::bind(&usrp_e100_impl::rx_codec_set, this, _1, _2) + ); + _tx_codec_proxy = wax_obj_proxy::make( + boost::bind(&usrp_e100_impl::tx_codec_get, this, _1, _2), + boost::bind(&usrp_e100_impl::tx_codec_set, this, _1, _2) + ); +} + +/*********************************************************************** + * RX Codec Properties + **********************************************************************/ +static const std::string ad9862_pga_gain_name = "ad9862 pga"; + +void usrp_e100_impl::rx_codec_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<codec_prop_t>()){ + case CODEC_PROP_NAME: + val = std::string("usrp-e adc - ad9522"); + return; + + case CODEC_PROP_OTHERS: + val = prop_names_t(); + return; + + case CODEC_PROP_GAIN_NAMES: + val = prop_names_t(1, ad9862_pga_gain_name); + return; + + case CODEC_PROP_GAIN_RANGE: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + val = usrp_e100_codec_ctrl::rx_pga_gain_range; + return; + + case CODEC_PROP_GAIN_I: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + val = _codec_ctrl->get_rx_pga_gain('A'); + return; + + case CODEC_PROP_GAIN_Q: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + val = _codec_ctrl->get_rx_pga_gain('B'); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void usrp_e100_impl::rx_codec_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the set request conditioned on the key + switch(key.as<codec_prop_t>()){ + case CODEC_PROP_GAIN_I: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + _codec_ctrl->set_rx_pga_gain(val.as<double>(), 'A'); + return; + + case CODEC_PROP_GAIN_Q: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + _codec_ctrl->set_rx_pga_gain(val.as<double>(), 'B'); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX Codec Properties + **********************************************************************/ +void usrp_e100_impl::tx_codec_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<codec_prop_t>()){ + case CODEC_PROP_NAME: + val = std::string("usrp-e dac - ad9522"); + return; + + case CODEC_PROP_OTHERS: + val = prop_names_t(); + return; + + case CODEC_PROP_GAIN_NAMES: + val = prop_names_t(1, ad9862_pga_gain_name); + return; + + case CODEC_PROP_GAIN_RANGE: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + val = usrp_e100_codec_ctrl::tx_pga_gain_range; + return; + + case CODEC_PROP_GAIN_I: //only one gain for I and Q + case CODEC_PROP_GAIN_Q: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + val = _codec_ctrl->get_tx_pga_gain(); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void usrp_e100_impl::tx_codec_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the set request conditioned on the key + switch(key.as<codec_prop_t>()){ + case CODEC_PROP_GAIN_I: //only one gain for I and Q + case CODEC_PROP_GAIN_Q: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + _codec_ctrl->set_tx_pga_gain(val.as<double>()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/usrp_e100/dboard_iface.cpp b/host/lib/usrp/usrp_e100/dboard_iface.cpp new file mode 100644 index 000000000..4ee354486 --- /dev/null +++ b/host/lib/usrp/usrp_e100/dboard_iface.cpp @@ -0,0 +1,298 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e100_iface.hpp" +#include "usrp_e100_regs.hpp" +#include "clock_ctrl.hpp" +#include "codec_ctrl.hpp" +#include <uhd/usrp/dboard_iface.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/exception.hpp> +#include <boost/assign/list_of.hpp> +#include <linux/usrp_e.h> //i2c and spi constants + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +class usrp_e100_dboard_iface : public dboard_iface{ +public: + + usrp_e100_dboard_iface( + usrp_e100_iface::sptr iface, + usrp_e100_clock_ctrl::sptr clock, + usrp_e100_codec_ctrl::sptr codec + ){ + _iface = iface; + _clock = clock; + _codec = codec; + + //init the clock rate shadows + this->set_clock_rate(UNIT_RX, _clock->get_fpga_clock_rate()); + this->set_clock_rate(UNIT_TX, _clock->get_fpga_clock_rate()); + + _iface->poke16(UE_REG_GPIO_RX_DBG, 0); + _iface->poke16(UE_REG_GPIO_TX_DBG, 0); + } + + ~usrp_e100_dboard_iface(void){ + /* NOP */ + } + + special_props_t get_special_props(void){ + special_props_t props; + props.soft_clock_divider = false; + props.mangle_i2c_addrs = false; + return props; + } + + void write_aux_dac(unit_t, aux_dac_t, double); + double read_aux_adc(unit_t, aux_adc_t); + + void _set_pin_ctrl(unit_t, boost::uint16_t); + void _set_atr_reg(unit_t, atr_reg_t, boost::uint16_t); + void _set_gpio_ddr(unit_t, boost::uint16_t); + void _set_gpio_out(unit_t, boost::uint16_t); + void set_gpio_debug(unit_t, int); + boost::uint16_t read_gpio(unit_t); + + void write_i2c(boost::uint8_t, const byte_vector_t &); + byte_vector_t read_i2c(boost::uint8_t, size_t); + + void write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits + ); + + boost::uint32_t read_write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits + ); + + void set_clock_rate(unit_t, double); + std::vector<double> get_clock_rates(unit_t); + double get_clock_rate(unit_t); + void set_clock_enabled(unit_t, bool); + double get_codec_rate(unit_t); + +private: + usrp_e100_iface::sptr _iface; + usrp_e100_clock_ctrl::sptr _clock; + usrp_e100_codec_ctrl::sptr _codec; + uhd::dict<unit_t, double> _clock_rates; +}; + +/*********************************************************************** + * Make Function + **********************************************************************/ +dboard_iface::sptr make_usrp_e100_dboard_iface( + usrp_e100_iface::sptr iface, + usrp_e100_clock_ctrl::sptr clock, + usrp_e100_codec_ctrl::sptr codec +){ + return dboard_iface::sptr(new usrp_e100_dboard_iface(iface, clock, codec)); +} + +/*********************************************************************** + * Clock Rates + **********************************************************************/ +void usrp_e100_dboard_iface::set_clock_rate(unit_t unit, double rate){ + _clock_rates[unit] = rate; + switch(unit){ + case UNIT_RX: return _clock->set_rx_dboard_clock_rate(rate); + case UNIT_TX: return _clock->set_tx_dboard_clock_rate(rate); + } +} + +std::vector<double> usrp_e100_dboard_iface::get_clock_rates(unit_t unit){ + switch(unit){ + case UNIT_RX: return _clock->get_rx_dboard_clock_rates(); + case UNIT_TX: return _clock->get_tx_dboard_clock_rates(); + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +double usrp_e100_dboard_iface::get_clock_rate(unit_t unit){ + return _clock_rates[unit]; +} + +void usrp_e100_dboard_iface::set_clock_enabled(unit_t unit, bool enb){ + switch(unit){ + case UNIT_RX: return _clock->enable_rx_dboard_clock(enb); + case UNIT_TX: return _clock->enable_tx_dboard_clock(enb); + } +} + +double usrp_e100_dboard_iface::get_codec_rate(unit_t){ + return _clock->get_fpga_clock_rate(); +} + +/*********************************************************************** + * GPIO + **********************************************************************/ +void usrp_e100_dboard_iface::_set_pin_ctrl(unit_t unit, boost::uint16_t value){ + UHD_ASSERT_THROW(GPIO_SEL_ATR == 1); //make this assumption + switch(unit){ + case UNIT_RX: _iface->poke16(UE_REG_GPIO_RX_SEL, value); return; + case UNIT_TX: _iface->poke16(UE_REG_GPIO_TX_SEL, value); return; + } +} + +void usrp_e100_dboard_iface::_set_gpio_ddr(unit_t unit, boost::uint16_t value){ + switch(unit){ + case UNIT_RX: _iface->poke16(UE_REG_GPIO_RX_DDR, value); return; + case UNIT_TX: _iface->poke16(UE_REG_GPIO_TX_DDR, value); return; + } +} + +void usrp_e100_dboard_iface::_set_gpio_out(unit_t unit, boost::uint16_t value){ + switch(unit){ + case UNIT_RX: _iface->poke16(UE_REG_GPIO_RX_IO, value); return; + case UNIT_TX: _iface->poke16(UE_REG_GPIO_TX_IO, value); return; + } +} + +boost::uint16_t usrp_e100_dboard_iface::read_gpio(unit_t unit){ + switch(unit){ + case UNIT_RX: return _iface->peek16(UE_REG_GPIO_RX_IO); + case UNIT_TX: return _iface->peek16(UE_REG_GPIO_TX_IO); + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +void usrp_e100_dboard_iface::_set_atr_reg(unit_t unit, atr_reg_t atr, boost::uint16_t value){ + //define mapping of unit to atr regs to register address + static const uhd::dict< + unit_t, uhd::dict<atr_reg_t, boost::uint32_t> + > unit_to_atr_to_addr = map_list_of + (UNIT_RX, map_list_of + (ATR_REG_IDLE, UE_REG_ATR_IDLE_RXSIDE) + (ATR_REG_TX_ONLY, UE_REG_ATR_INTX_RXSIDE) + (ATR_REG_RX_ONLY, UE_REG_ATR_INRX_RXSIDE) + (ATR_REG_FULL_DUPLEX, UE_REG_ATR_FULL_RXSIDE) + ) + (UNIT_TX, map_list_of + (ATR_REG_IDLE, UE_REG_ATR_IDLE_TXSIDE) + (ATR_REG_TX_ONLY, UE_REG_ATR_INTX_TXSIDE) + (ATR_REG_RX_ONLY, UE_REG_ATR_INRX_TXSIDE) + (ATR_REG_FULL_DUPLEX, UE_REG_ATR_FULL_TXSIDE) + ) + ; + _iface->poke16(unit_to_atr_to_addr[unit][atr], value); +} + +void usrp_e100_dboard_iface::set_gpio_debug(unit_t unit, int which){ + //set this unit to all outputs + this->set_gpio_ddr(unit, 0xffff); + + //calculate the debug selections + boost::uint32_t dbg_sels = 0x0; + int sel = (which == 0)? GPIO_SEL_DEBUG_0 : GPIO_SEL_DEBUG_1; + for(size_t i = 0; i < 16; i++) dbg_sels |= sel << i; + + //set the debug on and which debug selection + switch(unit){ + case UNIT_RX: + _iface->poke16(UE_REG_GPIO_RX_DBG, 0xffff); + _iface->poke16(UE_REG_GPIO_RX_SEL, dbg_sels); + return; + + case UNIT_TX: + _iface->poke16(UE_REG_GPIO_TX_DBG, 0xffff); + _iface->poke16(UE_REG_GPIO_TX_SEL, dbg_sels); + return; + } +} + +/*********************************************************************** + * SPI + **********************************************************************/ +/*! + * Static function to convert a unit type to a spi slave device number. + * \param unit the dboard interface unit type enum + * \return the slave device number + */ +static boost::uint32_t unit_to_otw_spi_dev(dboard_iface::unit_t unit){ + switch(unit){ + case dboard_iface::UNIT_TX: return UE_SPI_SS_TX_DB; + case dboard_iface::UNIT_RX: return UE_SPI_SS_RX_DB; + } + UHD_THROW_INVALID_CODE_PATH(); +} + +void usrp_e100_dboard_iface::write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits +){ + _iface->write_spi(unit_to_otw_spi_dev(unit), config, data, num_bits); +} + +boost::uint32_t usrp_e100_dboard_iface::read_write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits +){ + return _iface->read_spi(unit_to_otw_spi_dev(unit), config, data, num_bits); +} + +/*********************************************************************** + * I2C + **********************************************************************/ +void usrp_e100_dboard_iface::write_i2c(boost::uint8_t addr, const byte_vector_t &bytes){ + return _iface->write_i2c(addr, bytes); +} + +byte_vector_t usrp_e100_dboard_iface::read_i2c(boost::uint8_t addr, size_t num_bytes){ + return _iface->read_i2c(addr, num_bytes); +} + +/*********************************************************************** + * Aux DAX/ADC + **********************************************************************/ +void usrp_e100_dboard_iface::write_aux_dac(dboard_iface::unit_t, aux_dac_t which, double value){ + //same aux dacs for each unit + static const uhd::dict<aux_dac_t, usrp_e100_codec_ctrl::aux_dac_t> which_to_aux_dac = map_list_of + (AUX_DAC_A, usrp_e100_codec_ctrl::AUX_DAC_A) + (AUX_DAC_B, usrp_e100_codec_ctrl::AUX_DAC_B) + (AUX_DAC_C, usrp_e100_codec_ctrl::AUX_DAC_C) + (AUX_DAC_D, usrp_e100_codec_ctrl::AUX_DAC_D) + ; + _codec->write_aux_dac(which_to_aux_dac[which], value); +} + +double usrp_e100_dboard_iface::read_aux_adc(dboard_iface::unit_t unit, aux_adc_t which){ + static const uhd::dict< + unit_t, uhd::dict<aux_adc_t, usrp_e100_codec_ctrl::aux_adc_t> + > unit_to_which_to_aux_adc = map_list_of + (UNIT_RX, map_list_of + (AUX_ADC_A, usrp_e100_codec_ctrl::AUX_ADC_A1) + (AUX_ADC_B, usrp_e100_codec_ctrl::AUX_ADC_B1) + ) + (UNIT_TX, map_list_of + (AUX_ADC_A, usrp_e100_codec_ctrl::AUX_ADC_A2) + (AUX_ADC_B, usrp_e100_codec_ctrl::AUX_ADC_B2) + ) + ; + return _codec->read_aux_adc(unit_to_which_to_aux_adc[unit][which]); +} diff --git a/host/lib/usrp/usrp_e100/dboard_impl.cpp b/host/lib/usrp/usrp_e100/dboard_impl.cpp new file mode 100644 index 000000000..0b89fed9f --- /dev/null +++ b/host/lib/usrp/usrp_e100/dboard_impl.cpp @@ -0,0 +1,172 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e100_impl.hpp" +#include "usrp_e100_regs.hpp" +#include <uhd/exception.hpp> +#include <uhd/usrp/dboard_props.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/usrp/misc_utils.hpp> +#include <boost/bind.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * Dboard Initialization + **********************************************************************/ +void usrp_e100_impl::dboard_init(void){ + _rx_db_eeprom.load(*_iface, I2C_ADDR_RX_DB); + _tx_db_eeprom.load(*_iface, I2C_ADDR_TX_DB); + + //create a new dboard interface and manager + _dboard_iface = make_usrp_e100_dboard_iface( + _iface, _clock_ctrl, _codec_ctrl + ); + _dboard_manager = dboard_manager::make( + _rx_db_eeprom.id, _tx_db_eeprom.id, _dboard_iface + ); + + //setup the dboard proxies + _rx_dboard_proxy = wax_obj_proxy::make( + boost::bind(&usrp_e100_impl::rx_dboard_get, this, _1, _2), + boost::bind(&usrp_e100_impl::rx_dboard_set, this, _1, _2) + ); + _tx_dboard_proxy = wax_obj_proxy::make( + boost::bind(&usrp_e100_impl::tx_dboard_get, this, _1, _2), + boost::bind(&usrp_e100_impl::tx_dboard_set, this, _1, _2) + ); +} + +/*********************************************************************** + * RX Dboard Get + **********************************************************************/ +void usrp_e100_impl::rx_dboard_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_NAME: + val = std::string("usrp-e dboard (rx unit)"); + return; + + case DBOARD_PROP_SUBDEV: + val = _dboard_manager->get_rx_subdev(key.name); + return; + + case DBOARD_PROP_SUBDEV_NAMES: + val = _dboard_manager->get_rx_subdev_names(); + return; + + case DBOARD_PROP_DBOARD_EEPROM: + val = _rx_db_eeprom; + return; + + case DBOARD_PROP_DBOARD_IFACE: + val = _dboard_iface; + return; + + case DBOARD_PROP_CODEC: + val = _rx_codec_proxy->get_link(); + return; + + case DBOARD_PROP_GAIN_GROUP: + val = make_gain_group( + _rx_db_eeprom.id, + _dboard_manager->get_rx_subdev(key.name), + _rx_codec_proxy->get_link(), + GAIN_GROUP_POLICY_RX + ); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * RX Dboard Set + **********************************************************************/ +void usrp_e100_impl::rx_dboard_set(const wax::obj &key, const wax::obj &val){ + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_DBOARD_EEPROM: + _rx_db_eeprom = val.as<dboard_eeprom_t>(); + _rx_db_eeprom.store(*_iface, I2C_ADDR_RX_DB); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX Dboard Get + **********************************************************************/ +void usrp_e100_impl::tx_dboard_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_NAME: + val = std::string("usrp-e dboard (tx unit)"); + return; + + case DBOARD_PROP_SUBDEV: + val = _dboard_manager->get_tx_subdev(key.name); + return; + + case DBOARD_PROP_SUBDEV_NAMES: + val = _dboard_manager->get_tx_subdev_names(); + return; + + case DBOARD_PROP_DBOARD_EEPROM: + val = _tx_db_eeprom; + return; + + case DBOARD_PROP_DBOARD_IFACE: + val = _dboard_iface; + return; + + case DBOARD_PROP_CODEC: + val = _tx_codec_proxy->get_link(); + return; + + case DBOARD_PROP_GAIN_GROUP: + val = make_gain_group( + _tx_db_eeprom.id, + _dboard_manager->get_tx_subdev(key.name), + _tx_codec_proxy->get_link(), + GAIN_GROUP_POLICY_TX + ); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * TX Dboard Set + **********************************************************************/ +void usrp_e100_impl::tx_dboard_set(const wax::obj &key, const wax::obj &val){ + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_DBOARD_EEPROM: + _tx_db_eeprom = val.as<dboard_eeprom_t>(); + _tx_db_eeprom.store(*_iface, I2C_ADDR_TX_DB); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/usrp_e100/dsp_impl.cpp b/host/lib/usrp/usrp_e100/dsp_impl.cpp new file mode 100644 index 000000000..8d084f066 --- /dev/null +++ b/host/lib/usrp/usrp_e100/dsp_impl.cpp @@ -0,0 +1,188 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e100_impl.hpp" +#include "usrp_e100_regs.hpp" +#include <uhd/usrp/dsp_utils.hpp> +#include <uhd/usrp/dsp_props.hpp> +#include <boost/math/special_functions/round.hpp> +#include <boost/bind.hpp> + +#define rint boost::math::iround + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * RX DDC Initialization + **********************************************************************/ +void usrp_e100_impl::rx_ddc_init(void){ + _rx_ddc_proxy = wax_obj_proxy::make( + boost::bind(&usrp_e100_impl::rx_ddc_get, this, _1, _2), + boost::bind(&usrp_e100_impl::rx_ddc_set, this, _1, _2) + ); + + //initial config and update + rx_ddc_set(DSP_PROP_FREQ_SHIFT, double(0)); + rx_ddc_set(DSP_PROP_HOST_RATE, double(16e6)); +} + +/*********************************************************************** + * RX DDC Get + **********************************************************************/ +void usrp_e100_impl::rx_ddc_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + case DSP_PROP_NAME: + val = std::string("usrp-e ddc0"); + return; + + case DSP_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case DSP_PROP_FREQ_SHIFT: + val = _ddc_freq; + return; + + case DSP_PROP_CODEC_RATE: + val = _clock_ctrl->get_fpga_clock_rate(); + return; + + case DSP_PROP_HOST_RATE: + val = _clock_ctrl->get_fpga_clock_rate()/_ddc_decim; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * RX DDC Set + **********************************************************************/ +void usrp_e100_impl::rx_ddc_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + + case DSP_PROP_STREAM_CMD: + issue_stream_cmd(val.as<stream_cmd_t>()); + return; + + case DSP_PROP_FREQ_SHIFT:{ + double new_freq = val.as<double>(); + _iface->poke32(UE_REG_DSP_RX_FREQ, + dsp_type1::calc_cordic_word_and_update(new_freq, _clock_ctrl->get_fpga_clock_rate()) + ); + _ddc_freq = new_freq; //shadow + } + return; + + case DSP_PROP_HOST_RATE:{ + //set the decimation + _ddc_decim = rint(_clock_ctrl->get_fpga_clock_rate()/val.as<double>()); + _iface->poke32(UE_REG_DSP_RX_DECIM_RATE, dsp_type1::calc_cic_filter_word(_ddc_decim)); + + //set the scaling + static const boost::int16_t default_rx_scale_iq = 1024; + _iface->poke32(UE_REG_DSP_RX_SCALE_IQ, + dsp_type1::calc_iq_scale_word(default_rx_scale_iq, default_rx_scale_iq) + ); + } + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX DUC Initialization + **********************************************************************/ +void usrp_e100_impl::tx_duc_init(void){ + _tx_duc_proxy = wax_obj_proxy::make( + boost::bind(&usrp_e100_impl::tx_duc_get, this, _1, _2), + boost::bind(&usrp_e100_impl::tx_duc_set, this, _1, _2) + ); + + //initial config and update + tx_duc_set(DSP_PROP_FREQ_SHIFT, double(0)); + tx_duc_set(DSP_PROP_HOST_RATE, double(16e6)); +} + +/*********************************************************************** + * TX DUC Get + **********************************************************************/ +void usrp_e100_impl::tx_duc_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + case DSP_PROP_NAME: + val = std::string("usrp-e duc0"); + return; + + case DSP_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case DSP_PROP_FREQ_SHIFT: + val = _duc_freq; + return; + + case DSP_PROP_CODEC_RATE: + val = _clock_ctrl->get_fpga_clock_rate(); + return; + + case DSP_PROP_HOST_RATE: + val = _clock_ctrl->get_fpga_clock_rate()/_duc_interp; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * TX DUC Set + **********************************************************************/ +void usrp_e100_impl::tx_duc_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + + case DSP_PROP_FREQ_SHIFT:{ + double new_freq = val.as<double>(); + _iface->poke32(UE_REG_DSP_TX_FREQ, + dsp_type1::calc_cordic_word_and_update(new_freq, _clock_ctrl->get_fpga_clock_rate()) + ); + _duc_freq = new_freq; //shadow + } + return; + + case DSP_PROP_HOST_RATE:{ + _duc_interp = rint(_clock_ctrl->get_fpga_clock_rate()/val.as<double>()); + + //set the interpolation + _iface->poke32(UE_REG_DSP_TX_INTERP_RATE, dsp_type1::calc_cic_filter_word(_duc_interp)); + + //set the scaling + _iface->poke32(UE_REG_DSP_TX_SCALE_IQ, dsp_type1::calc_iq_scale_word(_duc_interp)); + } + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/usrp_e100/fpga_downloader.cpp b/host/lib/usrp/usrp_e100/fpga_downloader.cpp new file mode 100644 index 000000000..018a120d6 --- /dev/null +++ b/host/lib/usrp/usrp_e100/fpga_downloader.cpp @@ -0,0 +1,269 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/config.hpp> +#ifdef UHD_DLL_EXPORTS +#include <uhd/exception.hpp> +#else //special case when this file is externally included +#include <stdexcept> +namespace uhd{ + typedef std::runtime_error os_error; + typedef std::runtime_error io_error; +} +#endif + +#include <iostream> +#include <sstream> +#include <fstream> +#include <string> +#include <cstdlib> + +#include <fcntl.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/ioctl.h> + +#include <linux/spi/spidev.h> + +/* + * Configuration connections + * + * CCK - MCSPI1_CLK + * DIN - MCSPI1_MOSI + * PROG_B - GPIO_175 - output (change mux) + * DONE - GPIO_173 - input (change mux) + * INIT_B - GPIO_114 - input (change mux) + * +*/ + +namespace usrp_e_fpga_downloader_utility{ + +const unsigned int PROG_B = 175; +const unsigned int DONE = 173; +const unsigned int INIT_B = 114; + +//static std::string bit_file = "safe_u1e.bin"; + +const int BUF_SIZE = 4096; + +enum gpio_direction {IN, OUT}; + +class gpio { + public: + + gpio(unsigned int gpio_num, gpio_direction pin_direction); + + bool get_value(); + void set_value(bool state); + + private: + + std::stringstream base_path; + std::fstream value_file; +}; + +class spidev { + public: + + spidev(std::string dev_name); + ~spidev(); + + void send(char *wbuf, char *rbuf, unsigned int nbytes); + + private: + + int fd; + +}; + +gpio::gpio(unsigned int gpio_num, gpio_direction pin_direction) +{ + std::fstream export_file; + + export_file.open("/sys/class/gpio/export", std::ios::out); + if (not export_file.is_open()) throw uhd::os_error( + "Failed to open gpio export file." + ); + + export_file << gpio_num << std::endl; + + base_path << "/sys/class/gpio/gpio" << gpio_num << std::flush; + + std::fstream direction_file; + std::string direction_file_name; + + if (gpio_num != 114) { + direction_file_name = base_path.str() + "/direction"; + + direction_file.open(direction_file_name.c_str()); + if (!direction_file.is_open()) + std::cout << "Failed to open direction file." << std::endl; + if (pin_direction == OUT) + direction_file << "out" << std::endl; + else + direction_file << "in" << std::endl; + } + + std::string value_file_name; + + value_file_name = base_path.str() + "/value"; + + value_file.open(value_file_name.c_str(), std::ios_base::in | std::ios_base::out); + if (!value_file.is_open()) + std::cout << "Failed to open value file." << std::endl; +} + +bool gpio::get_value() +{ + + std::string val; + + std::getline(value_file, val); + value_file.seekg(0); + + if (val == "0") + return false; + else if (val == "1") + return true; + else + std::cout << "Data read from value file|" << val << "|" << std::endl; + + return false; +} + +void gpio::set_value(bool state) +{ + + if (state) + value_file << "1" << std::endl; + else + value_file << "0" << std::endl; +} + +static void prepare_fpga_for_configuration(gpio &prog, gpio &)//init) +{ + + prog.set_value(true); + prog.set_value(false); + prog.set_value(true); + +#if 0 + bool ready_to_program(false); + unsigned int count(0); + do { + ready_to_program = init.get_value(); + count++; + + sleep(1); + } while (count < 10 && !ready_to_program); + + if (count == 10) { + std::cout << "FPGA not ready for programming." << std::endl; + exit(-1); + } +#endif +} + +spidev::spidev(std::string fname) +{ + int ret; + int mode = 0; + int speed = 12000000; + int bits = 8; + + fd = open(fname.c_str(), O_RDWR); + + ret = ioctl(fd, SPI_IOC_WR_MODE, &mode); + ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed); + ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits); +} + + +spidev::~spidev() +{ + close(fd); +} + +void spidev::send(char *buf, char *rbuf, unsigned int nbytes) +{ + int ret; + + struct spi_ioc_transfer tr; + tr.tx_buf = (unsigned long) buf; + tr.rx_buf = (unsigned long) rbuf; + tr.len = nbytes; + tr.delay_usecs = 0; + tr.speed_hz = 48000000; + tr.bits_per_word = 8; + + ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); + +} + +static void send_file_to_fpga(const std::string &file_name, gpio &error, gpio &done) +{ + std::ifstream bitstream; + + bitstream.open(file_name.c_str(), std::ios::binary); + if (!bitstream.is_open()) throw uhd::os_error( + "Coult not open the file: " + file_name + ); + + spidev spi("/dev/spidev1.0"); + char buf[BUF_SIZE]; + char rbuf[BUF_SIZE]; + + do { + bitstream.read(buf, BUF_SIZE); + spi.send(buf, rbuf, bitstream.gcount()); + + if (error.get_value()) + std::cout << "INIT_B went high, error occured." << std::endl; + + if (!done.get_value()) + std::cout << "Configuration complete." << std::endl; + + } while (bitstream.gcount() == BUF_SIZE); +} + +}//namespace usrp_e_fpga_downloader_utility + +void usrp_e100_load_fpga(const std::string &bin_file){ + using namespace usrp_e_fpga_downloader_utility; + + gpio gpio_prog_b(PROG_B, OUT); + gpio gpio_init_b(INIT_B, IN); + gpio gpio_done (DONE, IN); + + std::cout << "Loading FPGA image: " << bin_file << "... " << std::flush; + + if(std::system("/sbin/rmmod usrp_e") != 0){ + std::cerr << "USRP-E100 FPGA downloader: could not unload usrp_e module" << std::endl; + } + + prepare_fpga_for_configuration(gpio_prog_b, gpio_init_b); + + std::cout << "done = " << gpio_done.get_value() << std::endl; + + send_file_to_fpga(bin_file, gpio_init_b, gpio_done); + + if(std::system("/sbin/modprobe usrp_e") != 0){ + std::cerr << "USRP-E100 FPGA downloader: could not load usrp_e module" << std::endl; + } + +} + diff --git a/host/lib/usrp/usrp_e100/include/linux/usrp_e.h b/host/lib/usrp/usrp_e100/include/linux/usrp_e.h new file mode 100644 index 000000000..4c6a5dd89 --- /dev/null +++ b/host/lib/usrp/usrp_e100/include/linux/usrp_e.h @@ -0,0 +1,91 @@ + +/* + * Copyright (C) 2010 Ettus Research, LLC + * + * Written by Philip Balister <philip@opensdr.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __USRP_E_H +#define __USRP_E_H + +#include <linux/types.h> +#include <linux/ioctl.h> + +struct usrp_e_ctl16 { + __u32 offset; + __u32 count; + __u16 buf[20]; +}; + +struct usrp_e_ctl32 { + __u32 offset; + __u32 count; + __u32 buf[10]; +}; + +/* SPI interface */ + +#define UE_SPI_TXONLY 0 +#define UE_SPI_TXRX 1 + +/* Defines for spi ctrl register */ +#define UE_SPI_CTRL_TXNEG (1<<10) +#define UE_SPI_CTRL_RXNEG (1<<9) + +#define UE_SPI_PUSH_RISE 0 +#define UE_SPI_PUSH_FALL UE_SPI_CTRL_TXNEG +#define UE_SPI_LATCH_RISE 0 +#define UE_SPI_LATCH_FALL UE_SPI_CTRL_RXNEG + +struct usrp_e_spi { + __u8 readback; + __u32 slave; + __u32 data; + __u32 length; + __u32 flags; +}; + +struct usrp_e_i2c { + __u8 addr; + __u32 len; + __u8 data[]; +}; + +#define USRP_E_IOC_MAGIC 'u' +#define USRP_E_WRITE_CTL16 _IOW(USRP_E_IOC_MAGIC, 0x20, struct usrp_e_ctl16) +#define USRP_E_READ_CTL16 _IOWR(USRP_E_IOC_MAGIC, 0x21, struct usrp_e_ctl16) +#define USRP_E_WRITE_CTL32 _IOW(USRP_E_IOC_MAGIC, 0x22, struct usrp_e_ctl32) +#define USRP_E_READ_CTL32 _IOWR(USRP_E_IOC_MAGIC, 0x23, struct usrp_e_ctl32) +#define USRP_E_SPI _IOWR(USRP_E_IOC_MAGIC, 0x24, struct usrp_e_spi) +#define USRP_E_I2C_READ _IOWR(USRP_E_IOC_MAGIC, 0x25, struct usrp_e_i2c) +#define USRP_E_I2C_WRITE _IOW(USRP_E_IOC_MAGIC, 0x26, struct usrp_e_i2c) +#define USRP_E_GET_RB_INFO _IOR(USRP_E_IOC_MAGIC, 0x27, struct usrp_e_ring_buffer_size_t) +#define USRP_E_GET_COMPAT_NUMBER _IO(USRP_E_IOC_MAGIC, 0x28) + +#define USRP_E_COMPAT_NUMBER 1 + +/* Flag defines */ +#define RB_USER (1<<0) +#define RB_KERNEL (1<<1) +#define RB_OVERRUN (1<<2) +#define RB_DMA_ACTIVE (1<<3) +#define RB_USER_PROCESS (1<<4) + +struct ring_buffer_info { + int flags; + int len; +}; + +struct usrp_e_ring_buffer_size_t { + int num_pages_rx_flags; + int num_rx_frames; + int num_pages_tx_flags; + int num_tx_frames; +}; + +#endif diff --git a/host/lib/usrp/usrp_e100/io_impl.cpp b/host/lib/usrp/usrp_e100/io_impl.cpp new file mode 100644 index 000000000..fc6aaeaee --- /dev/null +++ b/host/lib/usrp/usrp_e100/io_impl.cpp @@ -0,0 +1,292 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e100_impl.hpp" +#include "usrp_e100_regs.hpp" +#include <uhd/usrp/dsp_utils.hpp> +#include <uhd/utils/thread_priority.hpp> +#include <uhd/transport/bounded_buffer.hpp> +#include "../../transport/vrt_packet_handler.hpp" +#include <boost/bind.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; + +zero_copy_if::sptr usrp_e100_make_mmap_zero_copy(usrp_e100_iface::sptr iface); + +/*********************************************************************** + * Constants + **********************************************************************/ +static const size_t rx_data_inline_sid = 1; +static const size_t tx_async_report_sid = 2; +static const int underflow_flags = async_metadata_t::EVENT_CODE_UNDERFLOW | async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET; +static const bool recv_debug = false; + +/*********************************************************************** + * io impl details (internal to this file) + * - pirate crew of 1 + * - bounded buffer + * - thread loop + * - vrt packet handler states + **********************************************************************/ +struct usrp_e100_impl::io_impl{ + io_impl(usrp_e100_iface::sptr iface): + data_xport(usrp_e100_make_mmap_zero_copy(iface)), + get_recv_buffs_fcn(boost::bind(&usrp_e100_impl::io_impl::get_recv_buffs, this, _1)), + get_send_buffs_fcn(boost::bind(&usrp_e100_impl::io_impl::get_send_buffs, this, _1)), + recv_pirate_booty(data_xport->get_num_recv_frames()), + async_msg_fifo(100/*messages deep*/) + { + /* NOP */ + } + + ~io_impl(void){ + recv_pirate_crew_raiding = false; + recv_pirate_crew.interrupt_all(); + recv_pirate_crew.join_all(); + } + + bool get_recv_buffs(vrt_packet_handler::managed_recv_buffs_t &buffs){ + UHD_ASSERT_THROW(buffs.size() == 1); + boost::this_thread::disable_interruption di; //disable because the wait can throw + return recv_pirate_booty.pop_with_timed_wait(buffs.front(), recv_timeout); + } + + bool get_send_buffs(vrt_packet_handler::managed_send_buffs_t &buffs){ + UHD_ASSERT_THROW(buffs.size() == 1); + buffs[0] = data_xport->get_send_buff(send_timeout); + return buffs[0].get() != NULL; + } + + //The data transport is listed first so that it is deconstructed last, + //which is after the states and booty which may hold managed buffers. + zero_copy_if::sptr data_xport; + + //bound callbacks for get buffs (bound once here, not in fast-path) + vrt_packet_handler::get_recv_buffs_t get_recv_buffs_fcn; + vrt_packet_handler::get_send_buffs_t get_send_buffs_fcn; + + //timeouts set on calls to recv/send (passed into get buffs methods) + double recv_timeout, send_timeout; + + //state management for the vrt packet handler code + vrt_packet_handler::recv_state packet_handler_recv_state; + vrt_packet_handler::send_state packet_handler_send_state; + bool continuous_streaming; + + //a pirate's life is the life for me! + void recv_pirate_loop(usrp_e100_clock_ctrl::sptr); + bounded_buffer<managed_recv_buffer::sptr> recv_pirate_booty; + bounded_buffer<async_metadata_t> async_msg_fifo; + boost::thread_group recv_pirate_crew; + bool recv_pirate_crew_raiding; +}; + +/*********************************************************************** + * Receive Pirate Loop + * - while raiding, loot for recv buffers + * - put booty into the alignment buffer + **********************************************************************/ +void usrp_e100_impl::io_impl::recv_pirate_loop(usrp_e100_clock_ctrl::sptr clock_ctrl) +{ + set_thread_priority_safe(); + recv_pirate_crew_raiding = true; + + while(recv_pirate_crew_raiding){ + managed_recv_buffer::sptr buff = this->data_xport->get_recv_buff(); + if (not buff.get()) continue; //ignore timeout/error buffers + + if (recv_debug){ + std::cout << "len " << buff->size() << std::endl; + for (size_t i = 0; i < 9; i++){ + std::cout << boost::format(" 0x%08x") % buff->cast<const boost::uint32_t *>()[i] << std::endl; + } + std::cout << std::endl << std::endl; + } + + try{ + //extract the vrt header packet info + vrt::if_packet_info_t if_packet_info; + if_packet_info.num_packet_words32 = buff->size()/sizeof(boost::uint32_t); + const boost::uint32_t *vrt_hdr = buff->cast<const boost::uint32_t *>(); + vrt::if_hdr_unpack_le(vrt_hdr, if_packet_info); + + //handle an rx data packet or inline message + if (if_packet_info.sid == rx_data_inline_sid){ + if (recv_debug) std::cout << "this is rx_data_inline_sid\n"; + //same number of frames as the data transport -> always immediate + recv_pirate_booty.push_with_wait(buff); + continue; + } + + //handle a tx async report message + if (if_packet_info.sid == tx_async_report_sid and if_packet_info.packet_type != vrt::if_packet_info_t::PACKET_TYPE_DATA){ + if (recv_debug) std::cout << "this is tx_async_report_sid\n"; + + //fill in the async metadata + async_metadata_t metadata; + metadata.channel = 0; + metadata.has_time_spec = if_packet_info.has_tsi and if_packet_info.has_tsf; + metadata.time_spec = time_spec_t( + time_t(if_packet_info.tsi), size_t(if_packet_info.tsf), clock_ctrl->get_fpga_clock_rate() + ); + metadata.event_code = vrt_packet_handler::get_context_code<async_metadata_t::event_code_t>(vrt_hdr, if_packet_info); + + //print the famous U, and push the metadata into the message queue + if (metadata.event_code & underflow_flags) std::cerr << "U" << std::flush; + async_msg_fifo.push_with_pop_on_full(metadata); + continue; + } + + if (recv_debug) std::cout << "this is unknown packet\n"; + + }catch(const std::exception &e){ + std::cerr << "Error (usrp-e recv pirate loop): " << e.what() << std::endl; + } + } +} + +/*********************************************************************** + * Helper Functions + **********************************************************************/ +void usrp_e100_impl::io_init(void){ + //setup otw types + _send_otw_type.width = 16; + _send_otw_type.shift = 0; + _send_otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; + + _recv_otw_type.width = 16; + _recv_otw_type.shift = 0; + _recv_otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; + + //setup before the registers (transport called to calculate max spp) + _io_impl = UHD_PIMPL_MAKE(io_impl, (_iface)); + + //clear state machines + _iface->poke32(UE_REG_CTRL_RX_CLEAR, 0); + _iface->poke32(UE_REG_CTRL_TX_CLEAR, 0); + + //setup rx data path + _iface->poke32(UE_REG_CTRL_RX_NSAMPS_PER_PKT, get_max_recv_samps_per_packet()); + _iface->poke32(UE_REG_CTRL_RX_NCHANNELS, 1); + _iface->poke32(UE_REG_CTRL_RX_VRT_HEADER, 0 + | (0x1 << 28) //if data with stream id + | (0x1 << 26) //has trailer + | (0x3 << 22) //integer time other + | (0x1 << 20) //fractional time sample count + ); + _iface->poke32(UE_REG_CTRL_RX_VRT_STREAM_ID, rx_data_inline_sid); + _iface->poke32(UE_REG_CTRL_RX_VRT_TRAILER, 0); + + //setup the tx policy + _iface->poke32(UE_REG_CTRL_TX_REPORT_SID, tx_async_report_sid); + _iface->poke32(UE_REG_CTRL_TX_POLICY, UE_FLAG_CTRL_TX_POLICY_NEXT_PACKET); + + //spawn a pirate, yarrr! + _io_impl->recv_pirate_crew.create_thread(boost::bind( + &usrp_e100_impl::io_impl::recv_pirate_loop, _io_impl.get(), _clock_ctrl + )); +} + +void usrp_e100_impl::issue_stream_cmd(const stream_cmd_t &stream_cmd){ + _io_impl->continuous_streaming = (stream_cmd.stream_mode == stream_cmd_t::STREAM_MODE_START_CONTINUOUS); + _iface->poke32(UE_REG_CTRL_RX_STREAM_CMD, dsp_type1::calc_stream_cmd_word(stream_cmd)); + _iface->poke32(UE_REG_CTRL_RX_TIME_SECS, boost::uint32_t(stream_cmd.time_spec.get_full_secs())); + _iface->poke32(UE_REG_CTRL_RX_TIME_TICKS, stream_cmd.time_spec.get_tick_count(_clock_ctrl->get_fpga_clock_rate())); +} + +void usrp_e100_impl::handle_overrun(size_t){ + std::cerr << "O"; //the famous OOOOOOOOOOO + if (_io_impl->continuous_streaming){ + this->issue_stream_cmd(stream_cmd_t::STREAM_MODE_START_CONTINUOUS); + } +} + +/*********************************************************************** + * Data Send + **********************************************************************/ +size_t usrp_e100_impl::get_max_send_samps_per_packet(void) const{ + static const size_t hdr_size = 0 + + vrt::max_if_hdr_words32*sizeof(boost::uint32_t) + - sizeof(vrt::if_packet_info_t().cid) //no class id ever used + ; + size_t bpp = _io_impl->data_xport->get_send_frame_size() - hdr_size; + return bpp/_send_otw_type.get_sample_size(); +} + +size_t usrp_e100_impl::send( + const send_buffs_type &buffs, size_t num_samps, + const tx_metadata_t &metadata, const io_type_t &io_type, + send_mode_t send_mode, double timeout +){ + _io_impl->send_timeout = timeout; + return vrt_packet_handler::send( + _io_impl->packet_handler_send_state, //last state of the send handler + buffs, num_samps, //buffer to fill + metadata, send_mode, //samples metadata + io_type, _send_otw_type, //input and output types to convert + _clock_ctrl->get_fpga_clock_rate(), //master clock tick rate + uhd::transport::vrt::if_hdr_pack_le, + _io_impl->get_send_buffs_fcn, + get_max_send_samps_per_packet() + ); +} + +/*********************************************************************** + * Data Recv + **********************************************************************/ +size_t usrp_e100_impl::get_max_recv_samps_per_packet(void) const{ + static const size_t hdr_size = 0 + + vrt::max_if_hdr_words32*sizeof(boost::uint32_t) + + sizeof(vrt::if_packet_info_t().tlr) //forced to have trailer + - sizeof(vrt::if_packet_info_t().cid) //no class id ever used + ; + size_t bpp = _io_impl->data_xport->get_recv_frame_size() - hdr_size; + return bpp/_recv_otw_type.get_sample_size(); +} + +size_t usrp_e100_impl::recv( + const recv_buffs_type &buffs, size_t num_samps, + rx_metadata_t &metadata, const io_type_t &io_type, + recv_mode_t recv_mode, double timeout +){ + _io_impl->recv_timeout = timeout; + return vrt_packet_handler::recv( + _io_impl->packet_handler_recv_state, //last state of the recv handler + buffs, num_samps, //buffer to fill + metadata, recv_mode, //samples metadata + io_type, _recv_otw_type, //input and output types to convert + _clock_ctrl->get_fpga_clock_rate(), //master clock tick rate + uhd::transport::vrt::if_hdr_unpack_le, + _io_impl->get_recv_buffs_fcn, + boost::bind(&usrp_e100_impl::handle_overrun, this, _1) + ); +} + +/*********************************************************************** + * Async Recv + **********************************************************************/ +bool usrp_e100_impl::recv_async_msg( + async_metadata_t &async_metadata, double timeout +){ + boost::this_thread::disable_interruption di; //disable because the wait can throw + return _io_impl->async_msg_fifo.pop_with_timed_wait(async_metadata, timeout); +} diff --git a/host/lib/usrp/usrp_e100/mboard_impl.cpp b/host/lib/usrp/usrp_e100/mboard_impl.cpp new file mode 100644 index 000000000..cec4fd0ad --- /dev/null +++ b/host/lib/usrp/usrp_e100/mboard_impl.cpp @@ -0,0 +1,220 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e100_impl.hpp" +#include "usrp_e100_regs.hpp" +#include <uhd/exception.hpp> +#include <uhd/usrp/dsp_utils.hpp> +#include <uhd/usrp/misc_utils.hpp> +#include <uhd/usrp/mboard_props.hpp> +#include <boost/bind.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * Mboard Initialization + **********************************************************************/ +void usrp_e100_impl::mboard_init(void){ + _mboard_proxy = wax_obj_proxy::make( + boost::bind(&usrp_e100_impl::mboard_get, this, _1, _2), + boost::bind(&usrp_e100_impl::mboard_set, this, _1, _2) + ); + + //set the ticks per seconds into the vita time control + _iface->poke32(UE_REG_TIME64_TPS, + boost::uint32_t(_clock_ctrl->get_fpga_clock_rate()) + ); + + //init the clock config + _clock_config = clock_config_t::internal(); + update_clock_config(); +} + +void usrp_e100_impl::update_clock_config(void){ + boost::uint32_t pps_flags = 0; + + //translate pps polarity enums + switch(_clock_config.pps_polarity){ + case clock_config_t::PPS_POS: pps_flags |= UE_FLAG_TIME64_PPS_POSEDGE; break; + case clock_config_t::PPS_NEG: pps_flags |= UE_FLAG_TIME64_PPS_NEGEDGE; break; + default: throw uhd::value_error("unhandled clock configuration pps polarity"); + } + + //set the pps flags + _iface->poke32(UE_REG_TIME64_FLAGS, pps_flags); + + //clock source ref 10mhz + switch(_clock_config.ref_source){ + case clock_config_t::REF_AUTO: _clock_ctrl->use_auto_ref(); break; + case clock_config_t::REF_INT: _clock_ctrl->use_internal_ref(); break; + case clock_config_t::REF_SMA: _clock_ctrl->use_auto_ref(); break; + default: throw uhd::value_error("unhandled clock configuration ref source"); + } +} + +/*********************************************************************** + * Mboard Get + **********************************************************************/ +void usrp_e100_impl::mboard_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<mboard_prop_t>()){ + case MBOARD_PROP_NAME: + val = std::string("usrp-e mboard"); + return; + + case MBOARD_PROP_OTHERS: + val = prop_names_t(); + return; + + case MBOARD_PROP_RX_DBOARD: + UHD_ASSERT_THROW(key.name == ""); + val = _rx_dboard_proxy->get_link(); + return; + + case MBOARD_PROP_RX_DBOARD_NAMES: + val = prop_names_t(1, ""); //vector of size 1 with empty string + return; + + case MBOARD_PROP_TX_DBOARD: + UHD_ASSERT_THROW(key.name == ""); + val = _tx_dboard_proxy->get_link(); + return; + + case MBOARD_PROP_TX_DBOARD_NAMES: + val = prop_names_t(1, ""); //vector of size 1 with empty string + return; + + case MBOARD_PROP_RX_DSP: + UHD_ASSERT_THROW(key.name == ""); + val = _rx_ddc_proxy->get_link(); + return; + + case MBOARD_PROP_RX_DSP_NAMES: + val = prop_names_t(1, ""); + return; + + case MBOARD_PROP_TX_DSP: + UHD_ASSERT_THROW(key.name == ""); + val = _tx_duc_proxy->get_link(); + return; + + case MBOARD_PROP_TX_DSP_NAMES: + val = prop_names_t(1, ""); + return; + + case MBOARD_PROP_CLOCK_CONFIG: + val = _clock_config; + return; + + case MBOARD_PROP_RX_SUBDEV_SPEC: + val = _rx_subdev_spec; + return; + + case MBOARD_PROP_TX_SUBDEV_SPEC: + val = _tx_subdev_spec; + return; + + case MBOARD_PROP_EEPROM_MAP: + val = _iface->mb_eeprom; + return; + + case MBOARD_PROP_TIME_NOW: while(true){ + uint32_t secs = _iface->peek32(UE_REG_RB_TIME_NOW_SECS); + uint32_t ticks = _iface->peek32(UE_REG_RB_TIME_NOW_TICKS); + if (secs != _iface->peek32(UE_REG_RB_TIME_NOW_SECS)) continue; + val = time_spec_t(secs, ticks, _clock_ctrl->get_fpga_clock_rate()); + return; + } + + case MBOARD_PROP_TIME_PPS: while(true){ + uint32_t secs = _iface->peek32(UE_REG_RB_TIME_PPS_SECS); + uint32_t ticks = _iface->peek32(UE_REG_RB_TIME_PPS_TICKS); + if (secs != _iface->peek32(UE_REG_RB_TIME_PPS_SECS)) continue; + val = time_spec_t(secs, ticks, _clock_ctrl->get_fpga_clock_rate()); + return; + } + + case MBOARD_PROP_CLOCK_RATE: + val = _clock_ctrl->get_fpga_clock_rate(); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * Mboard Set + **********************************************************************/ +void usrp_e100_impl::mboard_set(const wax::obj &key, const wax::obj &val){ + //handle the get request conditioned on the key + switch(key.as<mboard_prop_t>()){ + + case MBOARD_PROP_TIME_NOW: + case MBOARD_PROP_TIME_PPS:{ + time_spec_t time_spec = val.as<time_spec_t>(); + _iface->poke32(UE_REG_TIME64_TICKS, time_spec.get_tick_count(_clock_ctrl->get_fpga_clock_rate())); + boost::uint32_t imm_flags = (key.as<mboard_prop_t>() == MBOARD_PROP_TIME_NOW)? 1 : 0; + _iface->poke32(UE_REG_TIME64_IMM, imm_flags); + _iface->poke32(UE_REG_TIME64_SECS, time_spec.get_full_secs()); + } + return; + + case MBOARD_PROP_RX_SUBDEV_SPEC: + _rx_subdev_spec = val.as<subdev_spec_t>(); + verify_rx_subdev_spec(_rx_subdev_spec, _mboard_proxy->get_link()); + //sanity check + UHD_ASSERT_THROW(_rx_subdev_spec.size() == 1); + //set the mux + _iface->poke32(UE_REG_DSP_RX_MUX, dsp_type1::calc_rx_mux_word( + _dboard_manager->get_rx_subdev(_rx_subdev_spec.front().sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() + )); + return; + + case MBOARD_PROP_TX_SUBDEV_SPEC: + _tx_subdev_spec = val.as<subdev_spec_t>(); + verify_tx_subdev_spec(_tx_subdev_spec, _mboard_proxy->get_link()); + //sanity check + UHD_ASSERT_THROW(_tx_subdev_spec.size() == 1); + //set the mux + _iface->poke32(UE_REG_DSP_TX_MUX, dsp_type1::calc_tx_mux_word( + _dboard_manager->get_tx_subdev(_tx_subdev_spec.front().sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() + )); + return; + + case MBOARD_PROP_EEPROM_MAP: + // Step1: commit the map, writing only those values set. + // Step2: readback the entire eeprom map into the iface. + val.as<mboard_eeprom_t>().commit(_iface->get_i2c_dev_iface(), mboard_eeprom_t::MAP_E100); + _iface->mb_eeprom = mboard_eeprom_t(_iface->get_i2c_dev_iface(), mboard_eeprom_t::MAP_E100); + return; + + case MBOARD_PROP_CLOCK_CONFIG: + _clock_config = val.as<clock_config_t>(); + update_clock_config(); + return; + + case MBOARD_PROP_CLOCK_RATE: + _clock_ctrl->set_fpga_clock_rate(val.as<double>()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/usrp_e100/usrp_e100_iface.cpp b/host/lib/usrp/usrp_e100/usrp_e100_iface.cpp new file mode 100644 index 000000000..ec0baf490 --- /dev/null +++ b/host/lib/usrp/usrp_e100/usrp_e100_iface.cpp @@ -0,0 +1,277 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e100_iface.hpp" +#include "usrp_e100_regs.hpp" +#include <uhd/exception.hpp> +#include <sys/ioctl.h> //ioctl +#include <fcntl.h> //open, close +#include <linux/usrp_e.h> //ioctl structures and constants +#include <boost/format.hpp> +#include <boost/thread.hpp> //mutex +#include <linux/i2c-dev.h> +#include <linux/i2c.h> +#include <stdexcept> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * I2C device node implementation wrapper + **********************************************************************/ +class i2c_dev_iface : public i2c_iface{ +public: + i2c_dev_iface(const std::string &node){ + if ((_node_fd = ::open(node.c_str(), O_RDWR)) < 0){ + throw uhd::io_error("Failed to open " + node); + } + } + + ~i2c_dev_iface(void){ + ::close(_node_fd); + } + + void write_i2c(boost::uint8_t addr, const byte_vector_t &bytes){ + byte_vector_t rw_bytes(bytes); + + //setup the message + i2c_msg msg; + msg.addr = addr; + msg.flags = 0; + msg.len = bytes.size(); + msg.buf = &rw_bytes.front(); + + //setup the data + i2c_rdwr_ioctl_data data; + data.msgs = &msg; + data.nmsgs = 1; + + //call the ioctl + UHD_ASSERT_THROW(::ioctl(_node_fd, I2C_RDWR, &data) >= 0); + } + + byte_vector_t read_i2c(boost::uint8_t addr, size_t num_bytes){ + byte_vector_t bytes(num_bytes); + + //setup the message + i2c_msg msg; + msg.addr = addr; + msg.flags = I2C_M_RD; + msg.len = bytes.size(); + msg.buf = &bytes.front(); + + //setup the data + i2c_rdwr_ioctl_data data; + data.msgs = &msg; + data.nmsgs = 1; + + //call the ioctl + UHD_ASSERT_THROW(::ioctl(_node_fd, I2C_RDWR, &data) >= 0); + + return bytes; + } + +private: int _node_fd; +}; + +/*********************************************************************** + * USRP-E100 interface implementation + **********************************************************************/ +class usrp_e100_iface_impl : public usrp_e100_iface{ +public: + + int get_file_descriptor(void){ + return _node_fd; + } + + /******************************************************************* + * Structors + ******************************************************************/ + usrp_e100_iface_impl(const std::string &node): + _i2c_dev_iface(i2c_dev_iface("/dev/i2c-3")) + { + //open the device node and check file descriptor + if ((_node_fd = ::open(node.c_str(), O_RDWR)) < 0){ + throw uhd::io_error("Failed to open " + node); + } + + mb_eeprom = mboard_eeprom_t(get_i2c_dev_iface(), mboard_eeprom_t::MAP_E100); + } + + ~usrp_e100_iface_impl(void){ + //close the device node file descriptor + ::close(_node_fd); + } + + /******************************************************************* + * IOCTL: provides the communication base for all other calls + ******************************************************************/ + void ioctl(int request, void *mem){ + boost::mutex::scoped_lock lock(_ctrl_mutex); + + if (::ioctl(_node_fd, request, mem) < 0){ + throw uhd::os_error(str( + boost::format("ioctl failed with request %d") % request + )); + } + } + + /******************************************************************* + * I2C device node interface + ******************************************************************/ + i2c_iface &get_i2c_dev_iface(void){ + return _i2c_dev_iface; + } + + /******************************************************************* + * Peek and Poke + ******************************************************************/ + void poke32(boost::uint32_t addr, boost::uint32_t value){ + //load the data struct + usrp_e_ctl32 data; + data.offset = addr; + data.count = 1; + data.buf[0] = value; + + //call the ioctl + this->ioctl(USRP_E_WRITE_CTL32, &data); + } + + void poke16(boost::uint32_t addr, boost::uint16_t value){ + //load the data struct + usrp_e_ctl16 data; + data.offset = addr; + data.count = 1; + data.buf[0] = value; + + //call the ioctl + this->ioctl(USRP_E_WRITE_CTL16, &data); + } + + boost::uint32_t peek32(boost::uint32_t addr){ + //load the data struct + usrp_e_ctl32 data; + data.offset = addr; + data.count = 1; + + //call the ioctl + this->ioctl(USRP_E_READ_CTL32, &data); + + return data.buf[0]; + } + + boost::uint16_t peek16(boost::uint32_t addr){ + //load the data struct + usrp_e_ctl16 data; + data.offset = addr; + data.count = 1; + + //call the ioctl + this->ioctl(USRP_E_READ_CTL16, &data); + + return data.buf[0]; + } + + /******************************************************************* + * I2C + ******************************************************************/ + static const size_t max_i2c_data_bytes = 10; + + void write_i2c(boost::uint8_t addr, const byte_vector_t &bytes){ + //allocate some memory for this transaction + UHD_ASSERT_THROW(bytes.size() <= max_i2c_data_bytes); + boost::uint8_t mem[sizeof(usrp_e_i2c) + max_i2c_data_bytes]; + + //load the data struct + usrp_e_i2c *data = reinterpret_cast<usrp_e_i2c*>(mem); + data->addr = addr; + data->len = bytes.size(); + std::copy(bytes.begin(), bytes.end(), data->data); + + //call the spi ioctl + this->ioctl(USRP_E_I2C_WRITE, data); + } + + byte_vector_t read_i2c(boost::uint8_t addr, size_t num_bytes){ + //allocate some memory for this transaction + UHD_ASSERT_THROW(num_bytes <= max_i2c_data_bytes); + boost::uint8_t mem[sizeof(usrp_e_i2c) + max_i2c_data_bytes]; + + //load the data struct + usrp_e_i2c *data = reinterpret_cast<usrp_e_i2c*>(mem); + data->addr = addr; + data->len = num_bytes; + + //call the spi ioctl + this->ioctl(USRP_E_I2C_READ, data); + + //unload the data + byte_vector_t bytes(data->len); + UHD_ASSERT_THROW(bytes.size() == num_bytes); + std::copy(data->data, data->data+bytes.size(), bytes.begin()); + return bytes; + } + + /******************************************************************* + * SPI + ******************************************************************/ + boost::uint32_t transact_spi( + int which_slave, + const spi_config_t &config, + boost::uint32_t bits, + size_t num_bits, + bool readback + ){ + //load data struct + usrp_e_spi data; + data.readback = (readback)? UE_SPI_TXRX : UE_SPI_TXONLY; + data.slave = which_slave; + data.length = num_bits; + data.data = bits; + + //load the flags + data.flags = 0; + data.flags |= (config.miso_edge == spi_config_t::EDGE_RISE)? UE_SPI_LATCH_RISE : UE_SPI_LATCH_FALL; + data.flags |= (config.mosi_edge == spi_config_t::EDGE_RISE)? UE_SPI_PUSH_FALL : UE_SPI_PUSH_RISE; + + //call the spi ioctl + this->ioctl(USRP_E_SPI, &data); + + //unload the data + return data.data; + } + + void write_uart(boost::uint8_t, const std::string &) { + throw uhd::not_implemented_error("Unhandled command write_uart()"); + } + + std::string read_uart(boost::uint8_t) { + throw uhd::not_implemented_error("Unhandled command read_uart()"); + } + +private: + int _node_fd; + i2c_dev_iface _i2c_dev_iface; + boost::mutex _ctrl_mutex; +}; + +/*********************************************************************** + * Public Make Function + **********************************************************************/ +usrp_e100_iface::sptr usrp_e100_iface::make(const std::string &node){ + return sptr(new usrp_e100_iface_impl(node)); +} diff --git a/host/lib/usrp/usrp_e100/usrp_e100_iface.hpp b/host/lib/usrp/usrp_e100/usrp_e100_iface.hpp new file mode 100644 index 000000000..cb0ca2dd4 --- /dev/null +++ b/host/lib/usrp/usrp_e100/usrp_e100_iface.hpp @@ -0,0 +1,75 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP_E100_IFACE_HPP +#define INCLUDED_USRP_E100_IFACE_HPP + +#include <uhd/transport/udp_simple.hpp> +#include <uhd/usrp/mboard_eeprom.hpp> +#include <uhd/types/serial.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include <boost/cstdint.hpp> +#include <uhd/usrp/mboard_iface.hpp> + +//////////////////////////////////////////////////////////////////////// +// I2C addresses +//////////////////////////////////////////////////////////////////////// +#define I2C_DEV_EEPROM 0x50 // 24LC02[45]: 7-bits 1010xxx +#define I2C_ADDR_MBOARD (I2C_DEV_EEPROM | 0x0) +#define I2C_ADDR_TX_DB (I2C_DEV_EEPROM | 0x4) +#define I2C_ADDR_RX_DB (I2C_DEV_EEPROM | 0x5) +//////////////////////////////////////////////////////////////////////// + +/*! + * The usrp-e interface class: + * Provides a set of functions to implementation layer. + * Including spi, peek, poke, control... + */ +class usrp_e100_iface : boost::noncopyable, public uhd::usrp::mboard_iface{ +public: + typedef boost::shared_ptr<usrp_e100_iface> sptr; + + /*! + * Make a new usrp-e interface with the control transport. + * \param node the device node name + * \return a new usrp-e interface object + */ + static sptr make(const std::string &node); + + /*! + * Get the underlying file descriptor. + * \return the file descriptor + */ + virtual int get_file_descriptor(void) = 0; + + /*! + * Perform an ioctl call on the device node file descriptor. + * This will throw when the internal ioctl call fails. + * \param request the control word + * \param mem pointer to some memory + */ + virtual void ioctl(int request, void *mem) = 0; + + //! Get the I2C interface for the I2C device node + virtual uhd::i2c_iface &get_i2c_dev_iface(void) = 0; + + //motherboard eeprom map structure + uhd::usrp::mboard_eeprom_t mb_eeprom; +}; + +#endif /* INCLUDED_USRP_E100_IFACE_HPP */ diff --git a/host/lib/usrp/usrp_e100/usrp_e100_impl.cpp b/host/lib/usrp/usrp_e100/usrp_e100_impl.cpp new file mode 100644 index 000000000..1385688e0 --- /dev/null +++ b/host/lib/usrp/usrp_e100/usrp_e100_impl.cpp @@ -0,0 +1,212 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e100_impl.hpp" +#include "usrp_e100_regs.hpp" +#include <uhd/usrp/device_props.hpp> +#include <uhd/usrp/mboard_props.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/utils/images.hpp> +#include <uhd/utils/warning.hpp> +#include <boost/format.hpp> +#include <boost/filesystem.hpp> +#include <boost/functional/hash.hpp> +#include <iostream> +#include <fstream> + +using namespace uhd; +using namespace uhd::usrp; +namespace fs = boost::filesystem; + +/*********************************************************************** + * Discovery + **********************************************************************/ +static device_addrs_t usrp_e100_find(const device_addr_t &hint){ + device_addrs_t usrp_e100_addrs; + + //return an empty list of addresses when type is set to non-usrp-e + if (hint.has_key("type") and hint["type"] != "usrp-e") return usrp_e100_addrs; + + //device node not provided, assume its 0 + if (not hint.has_key("node")){ + device_addr_t new_addr = hint; + new_addr["node"] = "/dev/usrp_e0"; + return usrp_e100_find(new_addr); + } + + //use the given device node name + if (fs::exists(hint["node"])){ + device_addr_t new_addr; + new_addr["type"] = "usrp-e"; + new_addr["node"] = fs::system_complete(fs::path(hint["node"])).file_string(); + try{ + usrp_e100_iface::sptr iface = usrp_e100_iface::make(new_addr["node"]); + new_addr["name"] = iface->mb_eeprom["name"]; + new_addr["serial"] = iface->mb_eeprom["serial"]; + if ( + (not hint.has_key("name") or hint["name"] == new_addr["name"]) and + (not hint.has_key("serial") or hint["serial"] == new_addr["serial"]) + ){ + usrp_e100_addrs.push_back(new_addr); + } + } + catch(const std::exception &e){ + uhd::warning::post( + std::string("Ignoring discovered device\n") + + e.what() + ); + } + } + + return usrp_e100_addrs; +} + +/*********************************************************************** + * Make + **********************************************************************/ +static device::sptr usrp_e100_make(const device_addr_t &device_addr){ + + //setup the main interface into fpga + std::string node = device_addr["node"]; + std::cout << boost::format("Opening USRP-E on %s") % node << std::endl; + usrp_e100_iface::sptr iface = usrp_e100_iface::make(node); + + //------------------------------------------------------------------ + //-- Handle the FPGA loading... + //-- The image can be confimed as already loaded when: + //-- 1) The compatibility number matches. + //-- 2) The hash in the hash-file matches. + //------------------------------------------------------------------ + static const char *hash_file_path = "/tmp/usrp_e100_hash"; + + //extract the fpga path for usrp-e + std::string usrp_e100_fpga_image = find_image_path( + device_addr.has_key("fpga")? device_addr["fpga"] : "usrp_e100_fpga.bin" + ); + + //calculate a hash of the fpga file + size_t fpga_hash = 0; + { + std::ifstream file(usrp_e100_fpga_image.c_str()); + if (not file.good()) throw uhd::io_error( + "cannot open fpga file for read: " + usrp_e100_fpga_image + ); + do{ + boost::hash_combine(fpga_hash, file.get()); + } while (file.good()); + file.close(); + } + + //read the compatibility number + boost::uint16_t fpga_compat_num = iface->peek16(UE_REG_MISC_COMPAT); + + //read the hash in the hash-file + size_t loaded_hash = 0; + try{std::ifstream(hash_file_path) >> loaded_hash;}catch(...){} + + //if not loaded: load the fpga image and write the hash-file + if (fpga_compat_num != USRP_E_COMPAT_NUM or loaded_hash != fpga_hash){ + iface.reset(); + usrp_e100_load_fpga(usrp_e100_fpga_image); + sleep(1); ///\todo do this better one day. + std::cout << boost::format("re-Opening USRP-E on %s") % node << std::endl; + iface = usrp_e100_iface::make(node); + try{std::ofstream(hash_file_path) << fpga_hash;}catch(...){} + } + + //check that the compatibility is correct + fpga_compat_num = iface->peek16(UE_REG_MISC_COMPAT); + if (fpga_compat_num != USRP_E_COMPAT_NUM){ + throw uhd::runtime_error(str(boost::format( + "Expected fpga compatibility number 0x%x, but got 0x%x:\n" + "The fpga build is not compatible with the host code build." + ) % USRP_E_COMPAT_NUM % fpga_compat_num)); + } + + return device::sptr(new usrp_e100_impl(iface)); +} + +UHD_STATIC_BLOCK(register_usrp_e100_device){ + device::register_device(&usrp_e100_find, &usrp_e100_make); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +usrp_e100_impl::usrp_e100_impl(usrp_e100_iface::sptr iface): _iface(iface){ + + //setup interfaces into hardware + _clock_ctrl = usrp_e100_clock_ctrl::make(_iface); + _codec_ctrl = usrp_e100_codec_ctrl::make(_iface); + + //initialize the mboard + mboard_init(); + + //initialize the dboards + dboard_init(); + + //initialize the dsps + rx_ddc_init(); + tx_duc_init(); + + //init the codec properties + codec_init(); + + //init the io send/recv + io_init(); + + //set default subdev specs + this->mboard_set(MBOARD_PROP_RX_SUBDEV_SPEC, subdev_spec_t()); + this->mboard_set(MBOARD_PROP_TX_SUBDEV_SPEC, subdev_spec_t()); +} + +usrp_e100_impl::~usrp_e100_impl(void){ + /* NOP */ +} + +/*********************************************************************** + * Device Get + **********************************************************************/ +void usrp_e100_impl::get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<device_prop_t>()){ + case DEVICE_PROP_NAME: + val = std::string("usrp-e device"); + return; + + case DEVICE_PROP_MBOARD: + UHD_ASSERT_THROW(key.name == ""); + val = _mboard_proxy->get_link(); + return; + + case DEVICE_PROP_MBOARD_NAMES: + val = prop_names_t(1, ""); //vector of size 1 with empty string + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * Device Set + **********************************************************************/ +void usrp_e100_impl::set(const wax::obj &, const wax::obj &){ + UHD_THROW_PROP_SET_ERROR(); +} diff --git a/host/lib/usrp/usrp_e100/usrp_e100_impl.hpp b/host/lib/usrp/usrp_e100/usrp_e100_impl.hpp new file mode 100644 index 000000000..897616320 --- /dev/null +++ b/host/lib/usrp/usrp_e100/usrp_e100_impl.hpp @@ -0,0 +1,167 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e100_iface.hpp" +#include "clock_ctrl.hpp" +#include "codec_ctrl.hpp" +#include <uhd/device.hpp> +#include <uhd/utils/pimpl.hpp> +#include <uhd/usrp/subdev_spec.hpp> +#include <uhd/usrp/dboard_eeprom.hpp> +#include <uhd/types/otw_type.hpp> +#include <uhd/types/clock_config.hpp> +#include <uhd/types/stream_cmd.hpp> +#include <uhd/usrp/dboard_manager.hpp> + +#ifndef INCLUDED_USRP_E100_IMPL_HPP +#define INCLUDED_USRP_E100_IMPL_HPP + +static const boost::uint16_t USRP_E_COMPAT_NUM = 0x03; + +//! load an fpga image from a bin file into the usrp-e fpga +extern void usrp_e100_load_fpga(const std::string &bin_file); + +/*! + * Make a usrp-e dboard interface. + * \param iface the usrp-e interface object + * \param clock the clock control interface + * \param codec the codec control interface + * \return a sptr to a new dboard interface + */ +uhd::usrp::dboard_iface::sptr make_usrp_e100_dboard_iface( + usrp_e100_iface::sptr iface, + usrp_e100_clock_ctrl::sptr clock, + usrp_e100_codec_ctrl::sptr codec +); + +/*! + * Simple wax obj proxy class: + * Provides a wax obj interface for a set and a get function. + * This allows us to create nested properties structures + * while maintaining flattened code within the implementation. + */ +class wax_obj_proxy : public wax::obj{ +public: + typedef boost::function<void(const wax::obj &, wax::obj &)> get_t; + typedef boost::function<void(const wax::obj &, const wax::obj &)> set_t; + typedef boost::shared_ptr<wax_obj_proxy> sptr; + + static sptr make(const get_t &get, const set_t &set){ + return sptr(new wax_obj_proxy(get, set)); + } + +private: + get_t _get; set_t _set; + wax_obj_proxy(const get_t &get, const set_t &set): _get(get), _set(set){}; + void get(const wax::obj &key, wax::obj &val){return _get(key, val);} + void set(const wax::obj &key, const wax::obj &val){return _set(key, val);} +}; + +/*! + * USRP-E100 implementation guts: + * The implementation details are encapsulated here. + * Handles properties on the mboard, dboard, dsps... + */ +class usrp_e100_impl : public uhd::device{ +public: + //structors + usrp_e100_impl(usrp_e100_iface::sptr); + ~usrp_e100_impl(void); + + //the io interface + size_t send(const send_buffs_type &, size_t, const uhd::tx_metadata_t &, const uhd::io_type_t &, send_mode_t, double); + size_t recv(const recv_buffs_type &, size_t, uhd::rx_metadata_t &, const uhd::io_type_t &, recv_mode_t, double); + bool recv_async_msg(uhd::async_metadata_t &, double); + size_t get_max_send_samps_per_packet(void) const; + size_t get_max_recv_samps_per_packet(void) const; + +private: + //interface to ioctls and file descriptor + usrp_e100_iface::sptr _iface; + + //handle io stuff + UHD_PIMPL_DECL(io_impl) _io_impl; + uhd::otw_type_t _send_otw_type, _recv_otw_type; + void io_init(void); + void issue_stream_cmd(const uhd::stream_cmd_t &stream_cmd); + void handle_overrun(size_t); + + //configuration shadows + uhd::clock_config_t _clock_config; + + //ad9522 clock control + usrp_e100_clock_ctrl::sptr _clock_ctrl; + + //ad9862 codec control + usrp_e100_codec_ctrl::sptr _codec_ctrl; + + //device functions and settings + void get(const wax::obj &, wax::obj &); + void set(const wax::obj &, const wax::obj &); + + //mboard functions and settings + void mboard_init(void); + void mboard_get(const wax::obj &, wax::obj &); + void mboard_set(const wax::obj &, const wax::obj &); + wax_obj_proxy::sptr _mboard_proxy; + uhd::usrp::subdev_spec_t _rx_subdev_spec, _tx_subdev_spec; + + //xx dboard functions and settings + void dboard_init(void); + uhd::usrp::dboard_manager::sptr _dboard_manager; + uhd::usrp::dboard_iface::sptr _dboard_iface; + + //rx dboard functions and settings + uhd::usrp::dboard_eeprom_t _rx_db_eeprom; + void rx_dboard_get(const wax::obj &, wax::obj &); + void rx_dboard_set(const wax::obj &, const wax::obj &); + wax_obj_proxy::sptr _rx_dboard_proxy; + + //tx dboard functions and settings + uhd::usrp::dboard_eeprom_t _tx_db_eeprom; + void tx_dboard_get(const wax::obj &, wax::obj &); + void tx_dboard_set(const wax::obj &, const wax::obj &); + wax_obj_proxy::sptr _tx_dboard_proxy; + + //rx ddc functions and settings + void rx_ddc_init(void); + void rx_ddc_get(const wax::obj &, wax::obj &); + void rx_ddc_set(const wax::obj &, const wax::obj &); + double _ddc_freq; size_t _ddc_decim; + wax_obj_proxy::sptr _rx_ddc_proxy; + + //tx duc functions and settings + void tx_duc_init(void); + void tx_duc_get(const wax::obj &, wax::obj &); + void tx_duc_set(const wax::obj &, const wax::obj &); + double _duc_freq; size_t _duc_interp; + wax_obj_proxy::sptr _tx_duc_proxy; + + //codec functions and settings + void codec_init(void); + void rx_codec_get(const wax::obj &, wax::obj &); + void rx_codec_set(const wax::obj &, const wax::obj &); + void tx_codec_get(const wax::obj &, wax::obj &); + void tx_codec_set(const wax::obj &, const wax::obj &); + wax_obj_proxy::sptr _rx_codec_proxy, _tx_codec_proxy; + + //clock control functions and settings + void init_clock_config(void); + void update_clock_config(void); +}; + +#endif /* INCLUDED_USRP_E100_IMPL_HPP */ diff --git a/host/lib/usrp/usrp_e100/usrp_e100_mmap_zero_copy.cpp b/host/lib/usrp/usrp_e100/usrp_e100_mmap_zero_copy.cpp new file mode 100644 index 000000000..f4274dc5a --- /dev/null +++ b/host/lib/usrp/usrp_e100/usrp_e100_mmap_zero_copy.cpp @@ -0,0 +1,278 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e100_iface.hpp" +#include <uhd/transport/zero_copy.hpp> +#include <uhd/exception.hpp> +#include <linux/usrp_e.h> +#include <sys/mman.h> //mmap +#include <unistd.h> //getpagesize +#include <poll.h> //poll +#include <vector> +#include <iostream> + +using namespace uhd; +using namespace uhd::transport; + +static const bool fp_verbose = false; //fast-path verbose +static const bool sp_verbose = false; //slow-path verbose +static const size_t poll_breakout = 10; //how many poll timeouts constitute a full timeout + +/*********************************************************************** + * Reusable managed receiver buffer: + * - The buffer knows how to claim and release a frame. + **********************************************************************/ +class usrp_e100_mmap_zero_copy_mrb : public managed_recv_buffer{ +public: + usrp_e100_mmap_zero_copy_mrb(void *mem, ring_buffer_info *info): + _mem(mem), _info(info) { /* NOP */ } + + void release(void){ + if (_info->flags != RB_USER_PROCESS) return; + if (fp_verbose) std::cout << "recv buff: release" << std::endl; + _info->flags = RB_KERNEL; //release the frame + } + + bool ready(void){return _info->flags & RB_USER;} + + sptr get_new(void){ + if (fp_verbose) std::cout << " make_recv_buff: " << get_size() << std::endl; + _info->flags = RB_USER_PROCESS; //claim the frame + return sptr(this, &usrp_e100_mmap_zero_copy_mrb::fake_deleter); + } + +private: + static void fake_deleter(void *obj){ + static_cast<usrp_e100_mmap_zero_copy_mrb *>(obj)->release(); + } + + const void *get_buff(void) const{return _mem;} + size_t get_size(void) const{return _info->len;} + + void *_mem; + ring_buffer_info *_info; +}; + +/*********************************************************************** + * Reusable managed send buffer: + * - The buffer knows how to claim and release a frame. + **********************************************************************/ +class usrp_e100_mmap_zero_copy_msb : public managed_send_buffer{ +public: + usrp_e100_mmap_zero_copy_msb(void *mem, ring_buffer_info *info, size_t len, int fd): + _mem(mem), _info(info), _len(len), _fd(fd) { /* NOP */ } + + void commit(size_t len){ + if (_info->flags != RB_USER_PROCESS) return; + if (fp_verbose) std::cout << "send buff: commit " << len << std::endl; + _info->len = len; + _info->flags = RB_USER; //release the frame + if (::write(_fd, NULL, 0) < 0){ //notifies the kernel + std::cerr << UHD_THROW_SITE_INFO("write error") << std::endl; + } + } + + bool ready(void){return _info->flags & RB_KERNEL;} + + sptr get_new(void){ + if (fp_verbose) std::cout << " make_send_buff: " << get_size() << std::endl; + _info->flags = RB_USER_PROCESS; //claim the frame + return sptr(this, &usrp_e100_mmap_zero_copy_msb::fake_deleter); + } + +private: + static void fake_deleter(void *obj){ + static_cast<usrp_e100_mmap_zero_copy_msb *>(obj)->commit(0); + } + + void *get_buff(void) const{return _mem;} + size_t get_size(void) const{return _len;} + + void *_mem; + ring_buffer_info *_info; + size_t _len; + int _fd; +}; + +/*********************************************************************** + * The zero copy interface implementation + **********************************************************************/ +class usrp_e100_mmap_zero_copy_impl : public zero_copy_if{ +public: + usrp_e100_mmap_zero_copy_impl(usrp_e100_iface::sptr iface): + _fd(iface->get_file_descriptor()), _recv_index(0), _send_index(0) + { + //get system sizes + iface->ioctl(USRP_E_GET_RB_INFO, &_rb_size); + size_t page_size = getpagesize(); + _frame_size = page_size/2; + + //calculate the memory size + _map_size = + (_rb_size.num_pages_rx_flags + _rb_size.num_pages_tx_flags) * page_size + + (_rb_size.num_rx_frames + _rb_size.num_tx_frames) * _frame_size; + + //print sizes summary + if (sp_verbose){ + std::cout << "page_size: " << page_size << std::endl; + std::cout << "frame_size: " << _frame_size << std::endl; + std::cout << "num_pages_rx_flags: " << _rb_size.num_pages_rx_flags << std::endl; + std::cout << "num_rx_frames: " << _rb_size.num_rx_frames << std::endl; + std::cout << "num_pages_tx_flags: " << _rb_size.num_pages_tx_flags << std::endl; + std::cout << "num_tx_frames: " << _rb_size.num_tx_frames << std::endl; + std::cout << "map_size: " << _map_size << std::endl; + } + + //call mmap to get the memory + _mapped_mem = ::mmap( + NULL, _map_size, PROT_READ | PROT_WRITE, MAP_SHARED, _fd, 0 + ); + UHD_ASSERT_THROW(_mapped_mem != MAP_FAILED); + + //calculate the memory offsets for info and buffers + size_t recv_info_off = 0; + size_t recv_buff_off = recv_info_off + (_rb_size.num_pages_rx_flags * page_size); + size_t send_info_off = recv_buff_off + (_rb_size.num_rx_frames * _frame_size); + size_t send_buff_off = send_info_off + (_rb_size.num_pages_tx_flags * page_size); + + //print offset summary + if (sp_verbose){ + std::cout << "recv_info_off: " << recv_info_off << std::endl; + std::cout << "recv_buff_off: " << recv_buff_off << std::endl; + std::cout << "send_info_off: " << send_info_off << std::endl; + std::cout << "send_buff_off: " << send_buff_off << std::endl; + } + + //pointers to sections in the mapped memory + ring_buffer_info (*recv_info)[], (*send_info)[]; + char *recv_buff, *send_buff; + + //set the internal pointers for info and buffers + typedef ring_buffer_info (*rbi_pta)[]; + char *rb_ptr = reinterpret_cast<char *>(_mapped_mem); + recv_info = reinterpret_cast<rbi_pta>(rb_ptr + recv_info_off); + recv_buff = rb_ptr + recv_buff_off; + send_info = reinterpret_cast<rbi_pta>(rb_ptr + send_info_off); + send_buff = rb_ptr + send_buff_off; + + //initialize the managed receive buffers + for (size_t i = 0; i < get_num_recv_frames(); i++){ + _mrb_pool.push_back(usrp_e100_mmap_zero_copy_mrb( + recv_buff + get_recv_frame_size()*i, (*recv_info) + i + )); + } + + //initialize the managed send buffers + for (size_t i = 0; i < get_num_recv_frames(); i++){ + _msb_pool.push_back(usrp_e100_mmap_zero_copy_msb( + send_buff + get_send_frame_size()*i, (*send_info) + i, + get_send_frame_size(), _fd + )); + } + } + + ~usrp_e100_mmap_zero_copy_impl(void){ + if (sp_verbose) std::cout << "cleanup: munmap" << std::endl; + ::munmap(_mapped_mem, _map_size); + } + + managed_recv_buffer::sptr get_recv_buff(double timeout){ + if (fp_verbose) std::cout << "get_recv_buff: " << _recv_index << std::endl; + usrp_e100_mmap_zero_copy_mrb &mrb = _mrb_pool[_recv_index]; + + //poll/wait for a ready frame + if (not mrb.ready()){ + for (size_t i = 0; i < poll_breakout; i++){ + pollfd pfd; + pfd.fd = _fd; + pfd.events = POLLIN; + ssize_t poll_ret = ::poll(&pfd, 1, size_t(timeout*1e3/poll_breakout)); + if (fp_verbose) std::cout << " POLLIN: " << poll_ret << std::endl; + if (poll_ret > 0) goto found_user_frame; //good poll, continue on + } + return managed_recv_buffer::sptr(); //timed-out for real + } found_user_frame: + + //increment the index for the next call + if (++_recv_index == get_num_recv_frames()) _recv_index = 0; + + //return the managed buffer for this frame + return mrb.get_new(); + } + + size_t get_num_recv_frames(void) const{ + return _rb_size.num_rx_frames; + } + + size_t get_recv_frame_size(void) const{ + return _frame_size; + } + + managed_send_buffer::sptr get_send_buff(double timeout){ + if (fp_verbose) std::cout << "get_send_buff: " << _send_index << std::endl; + usrp_e100_mmap_zero_copy_msb &msb = _msb_pool[_send_index]; + + //poll/wait for a ready frame + if (not msb.ready()){ + pollfd pfd; + pfd.fd = _fd; + pfd.events = POLLOUT; + ssize_t poll_ret = ::poll(&pfd, 1, size_t(timeout*1e3)); + if (fp_verbose) std::cout << " POLLOUT: " << poll_ret << std::endl; + if (poll_ret <= 0) return managed_send_buffer::sptr(); + } + + //increment the index for the next call + if (++_send_index == get_num_send_frames()) _send_index = 0; + + //return the managed buffer for this frame + return msb.get_new(); + } + + size_t get_num_send_frames(void) const{ + return _rb_size.num_tx_frames; + } + + size_t get_send_frame_size(void) const{ + return _frame_size; + } + +private: + //file descriptor for mmap + int _fd; + + //the mapped memory itself + void *_mapped_mem; + + //mapped memory sizes + usrp_e_ring_buffer_size_t _rb_size; + size_t _frame_size, _map_size; + + //re-usable managed buffers + std::vector<usrp_e100_mmap_zero_copy_mrb> _mrb_pool; + std::vector<usrp_e100_mmap_zero_copy_msb> _msb_pool; + + //indexes into sub-sections of mapped memory + size_t _recv_index, _send_index; +}; + +/*********************************************************************** + * The zero copy interface make function + **********************************************************************/ +zero_copy_if::sptr usrp_e100_make_mmap_zero_copy(usrp_e100_iface::sptr iface){ + return zero_copy_if::sptr(new usrp_e100_mmap_zero_copy_impl(iface)); +} diff --git a/host/lib/usrp/usrp_e100/usrp_e100_regs.hpp b/host/lib/usrp/usrp_e100/usrp_e100_regs.hpp new file mode 100644 index 000000000..1bcae64c7 --- /dev/null +++ b/host/lib/usrp/usrp_e100/usrp_e100_regs.hpp @@ -0,0 +1,221 @@ + + +//////////////////////////////////////////////////////////////// +// +// Memory map for embedded wishbone bus +// +//////////////////////////////////////////////////////////////// + +// All addresses are byte addresses. All accesses are word (16-bit) accesses. +// This means that address bit 0 is usually 0. +// There are 11 bits of address for the control. + +#ifndef INCLUDED_USRP_E100_REGS_HPP +#define INCLUDED_USRP_E100_REGS_HPP + +///////////////////////////////////////////////////// +// Slave pointers + +#define UE_REG_SLAVE(n) ((n)<<7) + +///////////////////////////////////////////////////// +// Slave 0 -- Misc Regs + +#define UE_REG_MISC_BASE UE_REG_SLAVE(0) + +#define UE_REG_MISC_LED UE_REG_MISC_BASE + 0 +#define UE_REG_MISC_SW UE_REG_MISC_BASE + 2 +#define UE_REG_MISC_CGEN_CTRL UE_REG_MISC_BASE + 4 +#define UE_REG_MISC_CGEN_ST UE_REG_MISC_BASE + 6 +#define UE_REG_MISC_TEST UE_REG_MISC_BASE + 8 +#define UE_REG_MISC_RX_LEN UE_REG_MISC_BASE + 10 +#define UE_REG_MISC_TX_LEN UE_REG_MISC_BASE + 12 +#define UE_REG_MISC_XFER_RATE UE_REG_MISC_BASE + 14 +#define UE_REG_MISC_COMPAT UE_REG_MISC_BASE + 16 + +///////////////////////////////////////////////////// +// Slave 1 -- UART +// CLKDIV is 16 bits, others are only 8 + +#define UE_REG_UART_BASE UE_REG_SLAVE(1) + +#define UE_REG_UART_CLKDIV UE_REG_UART_BASE + 0 +#define UE_REG_UART_TXLEVEL UE_REG_UART_BASE + 2 +#define UE_REG_UART_RXLEVEL UE_REG_UART_BASE + 4 +#define UE_REG_UART_TXCHAR UE_REG_UART_BASE + 6 +#define UE_REG_UART_RXCHAR UE_REG_UART_BASE + 8 + +///////////////////////////////////////////////////// +// Slave 2 -- SPI Core +// This should be accessed through the IOCTL +// Users should not touch directly + +#define UE_REG_SPI_BASE UE_REG_SLAVE(2) + +//spi slave constants +#define UE_SPI_SS_AD9522 (1 << 3) +#define UE_SPI_SS_AD9862 (1 << 2) +#define UE_SPI_SS_TX_DB (1 << 1) +#define UE_SPI_SS_RX_DB (1 << 0) + +//////////////////////////////////////////////// +// Slave 3 -- I2C Core +// This should be accessed through the IOCTL +// Users should not touch directly + +#define UE_REG_I2C_BASE UE_REG_SLAVE(3) + + +//////////////////////////////////////////////// +// Slave 4 -- GPIO + +#define UE_REG_GPIO_BASE UE_REG_SLAVE(4) + +#define UE_REG_GPIO_RX_IO UE_REG_GPIO_BASE + 0 +#define UE_REG_GPIO_TX_IO UE_REG_GPIO_BASE + 2 +#define UE_REG_GPIO_RX_DDR UE_REG_GPIO_BASE + 4 +#define UE_REG_GPIO_TX_DDR UE_REG_GPIO_BASE + 6 +#define UE_REG_GPIO_RX_SEL UE_REG_GPIO_BASE + 8 +#define UE_REG_GPIO_TX_SEL UE_REG_GPIO_BASE + 10 +#define UE_REG_GPIO_RX_DBG UE_REG_GPIO_BASE + 12 +#define UE_REG_GPIO_TX_DBG UE_REG_GPIO_BASE + 14 + +//possible bit values for sel when dbg is 0: +#define GPIO_SEL_SW 0 // if pin is an output, set by software in the io reg +#define GPIO_SEL_ATR 1 // if pin is an output, set by ATR logic + +//possible bit values for sel when dbg is 1: +#define GPIO_SEL_DEBUG_0 0 // if pin is an output, debug lines from FPGA fabric +#define GPIO_SEL_DEBUG_1 1 // if pin is an output, debug lines from FPGA fabric + +/////////////////////////////////////////////////// +// Slave 6 -- ATR Controller +// 16 regs + +#define UE_REG_ATR_BASE UE_REG_SLAVE(6) + +#define UE_REG_ATR_IDLE_RXSIDE UE_REG_ATR_BASE + 0 +#define UE_REG_ATR_IDLE_TXSIDE UE_REG_ATR_BASE + 2 +#define UE_REG_ATR_INTX_RXSIDE UE_REG_ATR_BASE + 4 +#define UE_REG_ATR_INTX_TXSIDE UE_REG_ATR_BASE + 6 +#define UE_REG_ATR_INRX_RXSIDE UE_REG_ATR_BASE + 8 +#define UE_REG_ATR_INRX_TXSIDE UE_REG_ATR_BASE + 10 +#define UE_REG_ATR_FULL_RXSIDE UE_REG_ATR_BASE + 12 +#define UE_REG_ATR_FULL_TXSIDE UE_REG_ATR_BASE + 14 + +/////////////////////////////////////////////////// +// Slave 7 -- Readback Mux 32 + +#define UE_REG_RB_MUX_32_BASE UE_REG_SLAVE(7) + +#define UE_REG_RB_TIME_NOW_SECS UE_REG_RB_MUX_32_BASE + 0 +#define UE_REG_RB_TIME_NOW_TICKS UE_REG_RB_MUX_32_BASE + 4 +#define UE_REG_RB_TIME_PPS_SECS UE_REG_RB_MUX_32_BASE + 8 +#define UE_REG_RB_TIME_PPS_TICKS UE_REG_RB_MUX_32_BASE + 12 +#define UE_REG_RB_MISC_TEST32 UE_REG_RB_MUX_32_BASE + 16 + +//////////////////////////////////////////////////// +// Slave 8 -- Settings Bus +// +// Output-only, no readback, 64 registers total +// Each register must be written 64 bits at a time +// First the address xxx_xx00 and then xxx_xx10 + +#define UE_REG_SETTINGS_BASE_ADDR(n) (UE_REG_SLAVE(8) + (4*(n))) + +#define UE_REG_SR_MISC_TEST32 UE_REG_SETTINGS_BASE_ADDR(52) + +///////////////////////////////////////////////// +// Magic reset regs +//////////////////////////////////////////////// +#define UE_REG_CLEAR_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(48) + (4*(n))) +#define UE_REG_CLEAR_RX UE_REG_CLEAR_ADDR(0) +#define UE_REG_CLEAR_TX UE_REG_CLEAR_ADDR(1) + +///////////////////////////////////////////////// +// DSP RX Regs +//////////////////////////////////////////////// +#define UE_REG_DSP_RX_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(16) + (4*(n))) +#define UE_REG_DSP_RX_FREQ UE_REG_DSP_RX_ADDR(0) +#define UE_REG_DSP_RX_SCALE_IQ UE_REG_DSP_RX_ADDR(1) // {scale_i,scale_q} +#define UE_REG_DSP_RX_DECIM_RATE UE_REG_DSP_RX_ADDR(2) // hb and decim rate +#define UE_REG_DSP_RX_DCOFFSET_I UE_REG_DSP_RX_ADDR(3) // Bit 31 high sets fixed offset mode, using lower 14 bits, // otherwise it is automatic +#define UE_REG_DSP_RX_DCOFFSET_Q UE_REG_DSP_RX_ADDR(4) // Bit 31 high sets fixed offset mode, using lower 14 bits +#define UE_REG_DSP_RX_MUX UE_REG_DSP_RX_ADDR(5) + +/////////////////////////////////////////////////// +// VITA RX CTRL regs +/////////////////////////////////////////////////// +#define UE_REG_CTRL_RX_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(0) + (4*(n))) +// The following 3 are logically a single command register. +// They are clocked into the underlying fifo when time_ticks is written. +#define UE_REG_CTRL_RX_STREAM_CMD UE_REG_CTRL_RX_ADDR(0) // {now, chain, num_samples(30) +#define UE_REG_CTRL_RX_TIME_SECS UE_REG_CTRL_RX_ADDR(1) +#define UE_REG_CTRL_RX_TIME_TICKS UE_REG_CTRL_RX_ADDR(2) +#define UE_REG_CTRL_RX_CLEAR UE_REG_CTRL_RX_ADDR(3) // write anything to clear +#define UE_REG_CTRL_RX_VRT_HEADER UE_REG_CTRL_RX_ADDR(4) // word 0 of packet. FPGA fills in packet counter +#define UE_REG_CTRL_RX_VRT_STREAM_ID UE_REG_CTRL_RX_ADDR(5) // word 1 of packet. +#define UE_REG_CTRL_RX_VRT_TRAILER UE_REG_CTRL_RX_ADDR(6) +#define UE_REG_CTRL_RX_NSAMPS_PER_PKT UE_REG_CTRL_RX_ADDR(7) +#define UE_REG_CTRL_RX_NCHANNELS UE_REG_CTRL_RX_ADDR(8) // 1 in basic case, up to 4 for vector sources + +///////////////////////////////////////////////// +// DSP TX Regs +//////////////////////////////////////////////// +#define UE_REG_DSP_TX_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(32) + (4*(n))) +#define UE_REG_DSP_TX_FREQ UE_REG_DSP_TX_ADDR(0) +#define UE_REG_DSP_TX_SCALE_IQ UE_REG_DSP_TX_ADDR(1) // {scale_i,scale_q} +#define UE_REG_DSP_TX_INTERP_RATE UE_REG_DSP_TX_ADDR(2) +#define UE_REG_DSP_TX_UNUSED UE_REG_DSP_TX_ADDR(3) +#define UE_REG_DSP_TX_MUX UE_REG_DSP_TX_ADDR(4) + +///////////////////////////////////////////////// +// VITA TX CTRL regs +//////////////////////////////////////////////// +#define UE_REG_CTRL_TX_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(24) + (4*(n))) +#define UE_REG_CTRL_TX_NCHANNELS UE_REG_CTRL_TX_ADDR(0) +#define UE_REG_CTRL_TX_CLEAR UE_REG_CTRL_TX_ADDR(1) +#define UE_REG_CTRL_TX_REPORT_SID UE_REG_CTRL_TX_ADDR(2) +#define UE_REG_CTRL_TX_POLICY UE_REG_CTRL_TX_ADDR(3) + +#define UE_FLAG_CTRL_TX_POLICY_WAIT (0x1 << 0) +#define UE_FLAG_CTRL_TX_POLICY_NEXT_PACKET (0x1 << 1) +#define UE_FLAG_CTRL_TX_POLICY_NEXT_BURST (0x1 << 2) + +///////////////////////////////////////////////// +// VITA49 64 bit time (write only) +//////////////////////////////////////////////// + /*! + * \brief Time 64 flags + * + * <pre> + * + * 3 2 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-----------------------------------------------------------+-+-+ + * | |S|P| + * +-----------------------------------------------------------+-+-+ + * + * P - PPS edge selection (0=negedge, 1=posedge, default=0) + * S - Source (0=sma, 1=mimo, 0=default) + * + * </pre> + */ +#define UE_REG_TIME64_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(40) + (4*(n))) +#define UE_REG_TIME64_SECS UE_REG_TIME64_ADDR(0) // value to set absolute secs to on next PPS +#define UE_REG_TIME64_TICKS UE_REG_TIME64_ADDR(1) // value to set absolute ticks to on next PPS +#define UE_REG_TIME64_FLAGS UE_REG_TIME64_ADDR(2) // flags - see chart above +#define UE_REG_TIME64_IMM UE_REG_TIME64_ADDR(3) // set immediate (0=latch on next pps, 1=latch immediate, default=0) +#define UE_REG_TIME64_TPS UE_REG_TIME64_ADDR(4) // clock ticks per second (counter rollover) + +//pps flags (see above) +#define UE_FLAG_TIME64_PPS_NEGEDGE (0 << 0) +#define UE_FLAG_TIME64_PPS_POSEDGE (1 << 0) +#define UE_FLAG_TIME64_PPS_SMA (0 << 1) +#define UE_FLAG_TIME64_PPS_MIMO (1 << 1) + +#define UE_FLAG_TIME64_LATCH_NOW 1 +#define UE_FLAG_TIME64_LATCH_NEXT_PPS 0 + +#endif + diff --git a/host/lib/utils/CMakeLists.txt b/host/lib/utils/CMakeLists.txt new file mode 100644 index 000000000..c0d99b37e --- /dev/null +++ b/host/lib/utils/CMakeLists.txt @@ -0,0 +1,121 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# This file included, use CMake directory variables +######################################################################## + +######################################################################## +# Setup defines for process scheduling +######################################################################## +MESSAGE(STATUS "") +MESSAGE(STATUS "Configuring priority scheduling...") +INCLUDE(CheckCXXSourceCompiles) + +CHECK_CXX_SOURCE_COMPILES(" + #include <pthread.h> + int main(){ + struct sched_param sp; + pthread_setschedparam(pthread_self(), SCHED_RR, &sp); + return 0; + } + " HAVE_PTHREAD_SETSCHEDPARAM +) + +CHECK_CXX_SOURCE_COMPILES(" + #include <windows.h> + int main(){ + SetThreadPriority(GetCurrentThread(), 0); + SetPriorityClass(GetCurrentProcess(), 0); + return 0; + } + " HAVE_WIN_SETTHREADPRIORITY +) + +IF(HAVE_PTHREAD_SETSCHEDPARAM) + MESSAGE(STATUS " Priority scheduling supported through pthread_setschedparam.") + SET(THREAD_PRIO_DEFS HAVE_PTHREAD_SETSCHEDPARAM) +ELSEIF(HAVE_WIN_SETTHREADPRIORITY) + MESSAGE(STATUS " Priority scheduling supported through windows SetThreadPriority.") + SET(THREAD_PRIO_DEFS HAVE_WIN_SETTHREADPRIORITY) +ELSE() + MESSAGE(STATUS " Priority scheduling not supported.") + SET(THREAD_PRIO_DEFS HAVE_THREAD_PRIO_DUMMY) +ENDIF() + +SET_SOURCE_FILES_PROPERTIES( + ${CMAKE_CURRENT_SOURCE_DIR}/thread_priority.cpp + PROPERTIES COMPILE_DEFINITIONS "${THREAD_PRIO_DEFS}" +) + +######################################################################## +# Setup defines for module loading +######################################################################## +MESSAGE(STATUS "") +MESSAGE(STATUS "Configuring module loading...") +INCLUDE(CheckCXXSourceCompiles) + +SET(CMAKE_REQUIRED_LIBRARIES ${CMAKE_DL_LIBS}) +CHECK_CXX_SOURCE_COMPILES(" + #include <dlfcn.h> + int main(){ + dlopen(0, 0); + return 0; + } + " HAVE_DLOPEN +) +UNSET(CMAKE_REQUIRED_LIBRARIES) + +CHECK_CXX_SOURCE_COMPILES(" + #include <windows.h> + int main(){ + LoadLibrary(0); + return 0; + } + " HAVE_LOAD_LIBRARY +) + +IF(HAVE_DLOPEN) + MESSAGE(STATUS " Module loading supported through dlopen.") + SET(LOAD_MODULES_DEFS HAVE_DLOPEN) + LIBUHD_APPEND_LIBS(${CMAKE_DL_LIBS}) +ELSEIF(HAVE_LOAD_LIBRARY) + MESSAGE(STATUS " Module loading supported through LoadLibrary.") + SET(LOAD_MODULES_DEFS HAVE_LOAD_LIBRARY) +ELSE() + MESSAGE(STATUS " Module loading not supported.") + SET(LOAD_MODULES_DEFS HAVE_LOAD_MODULES_DUMMY) +ENDIF() + +SET_SOURCE_FILES_PROPERTIES( + ${CMAKE_CURRENT_SOURCE_DIR}/load_modules.cpp + PROPERTIES COMPILE_DEFINITIONS "${LOAD_MODULES_DEFS}" +) + +######################################################################## +# Append sources +######################################################################## +LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/gain_group.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/images.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/load_modules.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/paths.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/props.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/static.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/thread_priority.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/warning.cpp +) diff --git a/host/lib/utils/gain_group.cpp b/host/lib/utils/gain_group.cpp new file mode 100644 index 000000000..3af8a543d --- /dev/null +++ b/host/lib/utils/gain_group.cpp @@ -0,0 +1,186 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/gain_group.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/utils/algorithm.hpp> +#include <uhd/exception.hpp> +#include <boost/foreach.hpp> +#include <boost/bind.hpp> +#include <algorithm> +#include <vector> +#include <iostream> + +using namespace uhd; + +static const bool verbose = false; + +static bool compare_by_step_size( + const size_t &rhs, const size_t &lhs, std::vector<gain_fcns_t> &fcns +){ + return fcns.at(rhs).get_range().step() > fcns.at(lhs).get_range().step(); +} + +/*! + * Get a multiple of step with the following relation: + * result = step*floor(num/step) + * + * Due to small doubleing-point inaccuracies: + * num = n*step + e, where e is a small inaccuracy. + * When e is negative, floor would yeild (n-1)*step, + * despite that n*step is really the desired result. + * This function is designed to mitigate that issue. + * + * \param num the number to approximate + * \param step the step size to round with + * \param e the small inaccuracy to account for + * \return a multiple of step approximating num + */ +template <typename T> static T floor_step(T num, T step, T e = T(0.001)){ + return step*int(num/step + e); +} + +/*********************************************************************** + * gain group implementation + **********************************************************************/ +class gain_group_impl : public gain_group{ +public: + gain_group_impl(void){ + /*NOP*/ + } + + gain_range_t get_range(const std::string &name){ + if (not name.empty()) return _name_to_fcns[name].get_range(); + + double overall_min = 0, overall_max = 0, overall_step = 0; + BOOST_FOREACH(const gain_fcns_t &fcns, get_all_fcns()){ + const gain_range_t range = fcns.get_range(); + overall_min += range.start(); + overall_max += range.stop(); + //the overall step is the min (zero is invalid, first run) + if (overall_step == 0) overall_step = range.step(); + overall_step = std::min(overall_step, range.step()); + } + return gain_range_t(overall_min, overall_max, overall_step); + } + + double get_value(const std::string &name){ + if (not name.empty()) return _name_to_fcns[name].get_value(); + + double overall_gain = 0; + BOOST_FOREACH(const gain_fcns_t &fcns, get_all_fcns()){ + overall_gain += fcns.get_value(); + } + return overall_gain; + } + + void set_value(double gain, const std::string &name){ + if (not name.empty()) return _name_to_fcns[name].set_value(gain); + + std::vector<gain_fcns_t> all_fcns = get_all_fcns(); + if (all_fcns.size() == 0) return; //nothing to set! + + //get the max step size among the gains + double max_step = 0; + BOOST_FOREACH(const gain_fcns_t &fcns, all_fcns){ + max_step = std::max(max_step, fcns.get_range().step()); + } + + //create gain bucket to distribute power + std::vector<double> gain_bucket; + + //distribute power according to priority (round to max step) + double gain_left_to_distribute = gain; + BOOST_FOREACH(const gain_fcns_t &fcns, all_fcns){ + const gain_range_t range = fcns.get_range(); + gain_bucket.push_back(floor_step(uhd::clip( + gain_left_to_distribute, range.start(), range.stop() + ), max_step)); + gain_left_to_distribute -= gain_bucket.back(); + } + + //get a list of indexes sorted by step size large to small + std::vector<size_t> indexes_step_size_dec; + for (size_t i = 0; i < all_fcns.size(); i++){ + indexes_step_size_dec.push_back(i); + } + std::sort( + indexes_step_size_dec.begin(), indexes_step_size_dec.end(), + boost::bind(&compare_by_step_size, _1, _2, all_fcns) + ); + UHD_ASSERT_THROW( + all_fcns.at(indexes_step_size_dec.front()).get_range().step() >= + all_fcns.at(indexes_step_size_dec.back()).get_range().step() + ); + + //distribute the remainder (less than max step) + //fill in the largest step sizes first that are less than the remainder + BOOST_FOREACH(size_t i, indexes_step_size_dec){ + const gain_range_t range = all_fcns.at(i).get_range(); + double additional_gain = floor_step(uhd::clip( + gain_bucket.at(i) + gain_left_to_distribute, range.start(), range.stop() + ), range.step()) - gain_bucket.at(i); + gain_bucket.at(i) += additional_gain; + gain_left_to_distribute -= additional_gain; + } + if (verbose) std::cout << "gain_left_to_distribute " << gain_left_to_distribute << std::endl; + + //now write the bucket out to the individual gain values + for (size_t i = 0; i < gain_bucket.size(); i++){ + if (verbose) std::cout << gain_bucket.at(i) << std::endl; + all_fcns.at(i).set_value(gain_bucket.at(i)); + } + } + + const std::vector<std::string> get_names(void){ + return _name_to_fcns.keys(); + } + + void register_fcns( + const std::string &name, + const gain_fcns_t &gain_fcns, + size_t priority + ){ + if (name.empty() or _name_to_fcns.has_key(name)){ + //ensure the name name is unique and non-empty + return register_fcns(name + "_", gain_fcns, priority); + } + _registry[priority].push_back(gain_fcns); + _name_to_fcns[name] = gain_fcns; + } + +private: + //! get the gain function sets in order (highest priority first) + std::vector<gain_fcns_t> get_all_fcns(void){ + std::vector<gain_fcns_t> all_fcns; + BOOST_FOREACH(size_t key, uhd::sorted(_registry.keys())){ + const std::vector<gain_fcns_t> &fcns = _registry[key]; + all_fcns.insert(all_fcns.begin(), fcns.begin(), fcns.end()); + } + return all_fcns; + } + + uhd::dict<size_t, std::vector<gain_fcns_t> > _registry; + uhd::dict<std::string, gain_fcns_t> _name_to_fcns; +}; + +/*********************************************************************** + * gain group factory function + **********************************************************************/ +gain_group::sptr gain_group::make(void){ + return sptr(new gain_group_impl()); +} diff --git a/host/lib/utils/images.cpp b/host/lib/utils/images.cpp new file mode 100644 index 000000000..3756f035a --- /dev/null +++ b/host/lib/utils/images.cpp @@ -0,0 +1,40 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/images.hpp> +#include <uhd/exception.hpp> +#include <boost/foreach.hpp> +#include <boost/filesystem.hpp> +#include <vector> + +namespace fs = boost::filesystem; + +std::vector<fs::path> get_image_paths(void); //defined in paths.cpp + +/*********************************************************************** + * Find a image in the image paths + **********************************************************************/ +std::string uhd::find_image_path(const std::string &image_name){ + if (fs::exists(image_name)){ + return fs::system_complete(image_name).file_string(); + } + BOOST_FOREACH(const fs::path &path, get_image_paths()){ + fs::path image_path = path / image_name; + if (fs::exists(image_path)) return image_path.file_string(); + } + throw uhd::io_error("Could not find path for image: " + image_name); +} diff --git a/host/lib/utils/load_modules.cpp b/host/lib/utils/load_modules.cpp new file mode 100644 index 000000000..ad39960bb --- /dev/null +++ b/host/lib/utils/load_modules.cpp @@ -0,0 +1,109 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/static.hpp> +#include <uhd/exception.hpp> +#include <boost/format.hpp> +#include <boost/foreach.hpp> +#include <boost/filesystem.hpp> +#include <iostream> +#include <string> +#include <vector> + +namespace fs = boost::filesystem; + +/*********************************************************************** + * Module Load Function + **********************************************************************/ +#ifdef HAVE_DLOPEN +#include <dlfcn.h> +static void load_module(const std::string &file_name){ + if (dlopen(file_name.c_str(), RTLD_LAZY) == NULL){ + throw uhd::os_error(str( + boost::format("dlopen failed to load \"%s\"") % file_name + )); + } +} +#endif /* HAVE_DLOPEN */ + + +#ifdef HAVE_LOAD_LIBRARY +#include <windows.h> +static void load_module(const std::string &file_name){ + if (LoadLibrary(file_name.c_str()) == NULL){ + throw uhd::os_error(str( + boost::format("LoadLibrary failed to load \"%s\"") % file_name + )); + } +} +#endif /* HAVE_LOAD_LIBRARY */ + + +#ifdef HAVE_LOAD_MODULES_DUMMY +static void load_module(const std::string &file_name){ + throw uhd::not_implemented_error(str( + boost::format("Module loading not supported: Cannot load \"%s\"") % file_name + )); +} +#endif /* HAVE_LOAD_MODULES_DUMMY */ + +/*********************************************************************** + * Load Modules + **********************************************************************/ +/*! + * Load all modules in a given path. + * This will recurse into sub-directories. + * Does not throw, prints to std error. + * \param path the filesystem path + */ +static void load_module_path(const fs::path &path){ + if (not fs::exists(path)){ + //std::cerr << boost::format("Module path \"%s\" not found.") % path.file_string() << std::endl; + return; + } + + //try to load the files in this path + if (fs::is_directory(path)){ + for( + fs::directory_iterator dir_itr(path); + dir_itr != fs::directory_iterator(); + ++dir_itr + ){ + load_module_path(dir_itr->path()); + } + return; + } + + //its not a directory, try to load it + try{ + load_module(path.file_string()); + } + catch(const std::exception &err){ + std::cerr << boost::format("Error: %s") % err.what() << std::endl; + } +} + +std::vector<fs::path> get_module_paths(void); //defined in paths.cpp + +/*! + * Load all the modules given in the module paths. + */ +UHD_STATIC_BLOCK(load_modules){ + BOOST_FOREACH(const fs::path &path, get_module_paths()){ + load_module_path(path); + } +} diff --git a/host/lib/utils/paths.cpp b/host/lib/utils/paths.cpp new file mode 100644 index 000000000..329695873 --- /dev/null +++ b/host/lib/utils/paths.cpp @@ -0,0 +1,91 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "constants.hpp" +#include <uhd/config.hpp> +#include <boost/tokenizer.hpp> +#include <boost/program_options.hpp> +#include <boost/filesystem.hpp> +#include <boost/foreach.hpp> +#include <boost/bind.hpp> +#include <string> +#include <vector> + +namespace po = boost::program_options; +namespace fs = boost::filesystem; + +/*********************************************************************** + * Determine the paths separator + **********************************************************************/ +#ifdef UHD_PLATFORM_WIN32 + static const std::string env_path_sep = ";"; +#else + static const std::string env_path_sep = ":"; +#endif /*UHD_PLATFORM_WIN32*/ + +#define path_tokenizer(inp) \ + boost::tokenizer<boost::char_separator<char> > \ + (inp, boost::char_separator<char>(env_path_sep.c_str())) + +/*********************************************************************** + * Get a list of paths for an environment variable + **********************************************************************/ +static std::string name_mapper(const std::string &key, const std::string &var_name){ + return (var_name == key)? var_name : ""; +} + +static std::vector<fs::path> get_env_paths(const std::string &var_name){ + //register the options + std::string var_value; + po::options_description desc; + desc.add_options() + (var_name.c_str(), po::value<std::string>(&var_value)->default_value("")) + ; + + //parse environment variables + po::variables_map vm; + po::store(po::parse_environment(desc, boost::bind(&name_mapper, var_name, _1)), vm); + po::notify(vm); + + //convert to filesystem path, filter blank paths + std::vector<fs::path> paths; + if (var_value.empty()) return paths; //FIXME boost tokenizer throws w/ blank strings on some platforms + BOOST_FOREACH(const std::string &path_string, path_tokenizer(var_value)){ + if (path_string.empty()) continue; + paths.push_back(fs::system_complete(path_string)); + } + return paths; +} + +/*********************************************************************** + * Get a list of special purpose paths + **********************************************************************/ +std::vector<fs::path> get_image_paths(void){ + std::vector<fs::path> paths = get_env_paths("UHD_IMAGE_PATH"); + paths.push_back(fs::path(LOCAL_PKG_DATA_DIR) / "images"); + if (not std::string(INSTALLER_PKG_DATA_DIR).empty()) + paths.push_back(fs::path(INSTALLER_PKG_DATA_DIR) / "images"); + return paths; +} + +std::vector<fs::path> get_module_paths(void){ + std::vector<fs::path> paths = get_env_paths("UHD_MODULE_PATH"); + paths.push_back(fs::path(LOCAL_PKG_DATA_DIR) / "modules"); + if (not std::string(INSTALLER_PKG_DATA_DIR).empty()) + paths.push_back(fs::path(INSTALLER_PKG_DATA_DIR) / "modules"); + return paths; +} diff --git a/host/lib/utils/props.cpp b/host/lib/utils/props.cpp new file mode 100644 index 000000000..fc9f8e63f --- /dev/null +++ b/host/lib/utils/props.cpp @@ -0,0 +1,40 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/props.hpp> + +using namespace uhd; + +named_prop_t::named_prop_t( + const wax::obj &key, + const std::string &name +): + key(key), + name(name) +{ + /* NOP */ +} + +named_prop_t named_prop_t::extract( + const wax::obj &key, + const std::string &name +){ + if (key.type() == typeid(named_prop_t)){ + return key.as<named_prop_t>(); + } + return named_prop_t(key, name); +} diff --git a/host/lib/utils/static.cpp b/host/lib/utils/static.cpp new file mode 100644 index 000000000..a0dea3372 --- /dev/null +++ b/host/lib/utils/static.cpp @@ -0,0 +1,32 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/static.hpp> +#include <stdexcept> +#include <iostream> +_uhd_static_fixture::_uhd_static_fixture(void (*fcn)(void), const char *name){ + try{ + fcn(); + } + catch(const std::exception &e){ + std::cerr << "Exception in static block " << name << std::endl; + std::cerr << " " << e.what() << std::endl; + } + catch(...){ + std::cerr << "Exception in static block " << name << std::endl; + } +} diff --git a/host/lib/utils/thread_priority.cpp b/host/lib/utils/thread_priority.cpp new file mode 100644 index 000000000..bd34055e8 --- /dev/null +++ b/host/lib/utils/thread_priority.cpp @@ -0,0 +1,107 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/warning.hpp> +#include <uhd/exception.hpp> +#include <boost/format.hpp> +#include <iostream> + +bool uhd::set_thread_priority_safe(float priority, bool realtime){ + try{ + set_thread_priority(priority, realtime); + return true; + }catch(const std::exception &e){ + uhd::warning::post(str(boost::format( + "%s\n" + "Failed to set thread priority %d (%s):\n" + "Performance may be negatively affected.\n" + "See the general application notes.\n" + ) % e.what() % priority % (realtime?"realtime":""))); + return false; + } +} + +static void check_priority_range(float priority){ + if (priority > +1.0 or priority < -1.0) + throw std::range_error("priority out of range [-1.0, +1.0]"); +} + +/*********************************************************************** + * Pthread API to set priority + **********************************************************************/ +#ifdef HAVE_PTHREAD_SETSCHEDPARAM + #include <pthread.h> + + void uhd::set_thread_priority(float priority, bool realtime){ + check_priority_range(priority); + + //when realtime is not enabled, use sched other + int policy = (realtime)? SCHED_RR : SCHED_OTHER; + + //we cannot have below normal priority, set to zero + if (priority < 0) priority = 0; + + //get the priority bounds for the selected policy + int min_pri = sched_get_priority_min(policy); + int max_pri = sched_get_priority_max(policy); + if (min_pri == -1 or max_pri == -1) throw uhd::os_error("error in sched_get_priority_min/max"); + + //set the new priority and policy + sched_param sp; + sp.sched_priority = int(priority*(max_pri - min_pri)) + min_pri; + int ret = pthread_setschedparam(pthread_self(), policy, &sp); + if (ret != 0) throw uhd::os_error("error in pthread_setschedparam"); + } +#endif /* HAVE_PTHREAD_SETSCHEDPARAM */ + +/*********************************************************************** + * Windows API to set priority + **********************************************************************/ +#ifdef HAVE_WIN_SETTHREADPRIORITY + #include <windows.h> + + void uhd::set_thread_priority(float priority, bool realtime){ + check_priority_range(priority); + + //set the priority class on the process + int pri_class = (realtime)? REALTIME_PRIORITY_CLASS : NORMAL_PRIORITY_CLASS; + if (SetPriorityClass(GetCurrentProcess(), pri_class) == 0) + throw uhd::os_error("error in SetPriorityClass"); + + //scale the priority value to the constants + int priorities[] = { + THREAD_PRIORITY_IDLE, THREAD_PRIORITY_LOWEST, THREAD_PRIORITY_BELOW_NORMAL, THREAD_PRIORITY_NORMAL, + THREAD_PRIORITY_ABOVE_NORMAL, THREAD_PRIORITY_HIGHEST, THREAD_PRIORITY_TIME_CRITICAL + }; + size_t pri_index = size_t((priority+1.0)*6/2.0); // -1 -> 0, +1 -> 6 + + //set the thread priority on the thread + if (SetThreadPriority(GetCurrentThread(), priorities[pri_index]) == 0) + throw uhd::os_error("error in SetThreadPriority"); + } +#endif /* HAVE_WIN_SETTHREADPRIORITY */ + +/*********************************************************************** + * Unimplemented API to set priority + **********************************************************************/ +#ifdef HAVE_LOAD_MODULES_DUMMY + void uhd::set_thread_priority(float, bool){ + throw uhd::not_implemented_error("set thread priority not implemented"); + } + +#endif /* HAVE_LOAD_MODULES_DUMMY */ diff --git a/host/lib/utils/warning.cpp b/host/lib/utils/warning.cpp new file mode 100644 index 000000000..6a94a0a2c --- /dev/null +++ b/host/lib/utils/warning.cpp @@ -0,0 +1,87 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/warning.hpp> +#include <uhd/exception.hpp> +#include <boost/tokenizer.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/types/dict.hpp> +#include <boost/foreach.hpp> +#include <sstream> +#include <iostream> +#include <vector> + +using namespace uhd; + +#define tokenizer(inp, sep) \ + boost::tokenizer<boost::char_separator<char> > \ + (inp, boost::char_separator<char>(sep)) + +/*********************************************************************** + * Registry implementation + **********************************************************************/ +//create the registry for the handlers +typedef uhd::dict<std::string, warning::handler_t> registry_t; +UHD_SINGLETON_FCN(registry_t, get_registry) + +//the default warning handler +static void stderr_warning(const std::string &msg){ + std::cerr << msg; +} + +//register a default handler +UHD_STATIC_BLOCK(warning_register_default){ + warning::register_handler("default", &stderr_warning); +} + +/*********************************************************************** + * Post + format + **********************************************************************/ +void warning::post(const std::string &msg){ + std::stringstream ss; + + //format the warning message + ss << std::endl << "Warning:" << std::endl; + BOOST_FOREACH(const std::string &line, tokenizer(msg, "\n")){ + ss << " " << line << std::endl; + } + + //post the formatted message + BOOST_FOREACH(const std::string &name, get_registry().keys()){ + get_registry()[name](ss.str()); + } +} + +/*********************************************************************** + * Registry accessor functions + **********************************************************************/ +void warning::register_handler( + const std::string &name, const handler_t &handler +){ + get_registry()[name] = handler; +} + +warning::handler_t warning::unregister_handler(const std::string &name){ + if (not get_registry().has_key(name)) throw uhd::key_error( + "The warning registry does not have a handler registered to " + name + ); + return get_registry().pop(name); +} + +const std::vector<std::string> warning::registry_names(void){ + return get_registry().keys(); +} diff --git a/host/lib/version.cpp b/host/lib/version.cpp new file mode 100644 index 000000000..93fdecb1a --- /dev/null +++ b/host/lib/version.cpp @@ -0,0 +1,37 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "constants.hpp" +#include <uhd/version.hpp> + +std::string uhd::get_version_string(void){ + return UHD_VERSION_STRING; +} + +#include <uhd/utils/static.hpp> +#include <boost/version.hpp> +#include <iostream> + +UHD_STATIC_BLOCK(print_system_info){ + std::cout + << BOOST_PLATFORM << "; " + << BOOST_COMPILER << "; " + << "Boost_" << BOOST_VERSION << "; " + << "UHD_" << uhd::get_version_string() + << std::endl << std::endl + ; +} diff --git a/host/lib/wax.cpp b/host/lib/wax.cpp new file mode 100644 index 000000000..5f658acd8 --- /dev/null +++ b/host/lib/wax.cpp @@ -0,0 +1,151 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/wax.hpp> +#include <uhd/exception.hpp> +#include <boost/format.hpp> +#include <stdexcept> + +/*! + * The link args for internal use within this cpp file: + * + * It contains a link (in this case a pointer) to a wax object. + * Only the methods in this file may create or parse link args. + * The get_link method is the creator of a link args object. + * The [] operator will resolve the link and make the [] call. + * + * TODO: register the link args with the wax obj that it links to. + * That way, if the obj destructs, the link can be invalidated. + * The operator() will throw, rather than dereferencing bad memory. + */ +class link_args_t{ +public: + link_args_t(const wax::obj *obj_ptr) : _obj_ptr(obj_ptr){ + /* NOP */ + } + wax::obj & operator()(void) const{ + //recursively resolve link args to get at original pointer + if (_obj_ptr->type() == typeid(link_args_t)){ + return _obj_ptr->as<link_args_t>()(); + } + return *const_cast<wax::obj *>(_obj_ptr); + } +private: + const wax::obj *_obj_ptr; +}; + +/*! + * The proxy args for internal use within this cpp file: + * + * It contains a link and a key for setting/getting a property. + * Only the methods in this file may create or parse proxy args. + * Class methods have special handling for the case when the + * wax obj contains an instance of the proxy args. + */ +class proxy_args_t{ +public: + proxy_args_t(const wax::obj *obj_ptr, const wax::obj &key) : _key(key){ + _obj_link = obj_ptr->get_link(); + } + wax::obj & operator()(void) const{ + return _obj_link.as<link_args_t>()(); + } + const wax::obj & key(void) const{ + return _key; + } +private: + wax::obj _obj_link; + const wax::obj _key; +}; + +/*********************************************************************** + * Structors + **********************************************************************/ +wax::obj::obj(void){ + /* NOP */ +} + +wax::obj::obj(const obj &o){ + _contents = o._contents; +} + +wax::obj::~obj(void){ + /* NOP */ +} + +/*********************************************************************** + * Special Operators + **********************************************************************/ +wax::obj wax::obj::operator[](const obj &key){ + if (_contents.type() == typeid(proxy_args_t)){ + obj val = resolve(); + //check if its a special link and call + if (val.type() == typeid(link_args_t)){ + return val.as<link_args_t>()()[key]; + } + //unknown obj + throw uhd::type_error("cannot use [] on non wax::obj link"); + } + else{ + return proxy_args_t(this, key); + } +} + +wax::obj & wax::obj::operator=(const obj &val){ + if (_contents.type() == typeid(proxy_args_t)){ + proxy_args_t proxy_args = boost::any_cast<proxy_args_t>(_contents); + proxy_args().set(proxy_args.key(), val); + } + else{ + _contents = val._contents; + } + return *this; +} + +/*********************************************************************** + * Public Methods + **********************************************************************/ +wax::obj wax::obj::get_link(void) const{ + return link_args_t(this); +} + +const std::type_info & wax::obj::type(void) const{ + return resolve().type(); +} + +/*********************************************************************** + * Private Methods + **********************************************************************/ +boost::any wax::obj::resolve(void) const{ + if (_contents.type() == typeid(proxy_args_t)){ + obj val; + proxy_args_t proxy_args = boost::any_cast<proxy_args_t>(_contents); + proxy_args().get(proxy_args.key(), val); + return val.resolve(); + } + else{ + return _contents; + } +} + +void wax::obj::get(const obj &, obj &){ + throw uhd::type_error("Cannot call get on wax obj base class"); +} + +void wax::obj::set(const obj &, const obj &){ + throw uhd::type_error("Cannot call set on wax obj base class"); +} diff --git a/host/msvc/inttypes.h b/host/msvc/inttypes.h new file mode 100644 index 000000000..1c2baa82e --- /dev/null +++ b/host/msvc/inttypes.h @@ -0,0 +1,301 @@ +// ISO C9x compliant inttypes.h for Microsoft Visual Studio +// Based on ISO/IEC 9899:TC2 Committee draft (May 6, 2005) WG14/N1124 +// +// Copyright (c) 2006 Alexander Chemeris +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are met: +// +// 1. Redistributions of source code must retain the above copyright notice, +// this list of conditions and the following disclaimer. +// +// 2. Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the distribution. +// +// 3. The name of the author may be used to endorse or promote products +// derived from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +// WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +// EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +// OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +// WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +// OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef _MSC_VER // [ +#error "Use this header only with Microsoft Visual C++ compilers!" +#endif // _MSC_VER ] + +#ifndef _MSC_INTTYPES_H_ // [ +#define _MSC_INTTYPES_H_ + +#if _MSC_VER > 1000 +#pragma once +#endif + +#include <stdint.h> + +// 7.8 Format conversion of integer types + +typedef struct { + intmax_t quot; + intmax_t rem; +} imaxdiv_t; + +// 7.8.1 Macros for format specifiers + +// The fprintf macros for signed integers are: +#define PRId8 "d" +#define PRIi8 "i" +#define PRIdLEAST8 "d" +#define PRIiLEAST8 "i" +#define PRIdFAST8 "d" +#define PRIiFAST8 "i" + +#define PRId16 "hd" +#define PRIi16 "hi" +#define PRIdLEAST16 "hd" +#define PRIiLEAST16 "hi" +#define PRIdFAST16 "hd" +#define PRIiFAST16 "hi" + +#define PRId32 "I32d" +#define PRIi32 "I32i" +#define PRIdLEAST32 "I32d" +#define PRIiLEAST32 "I32i" +#define PRIdFAST32 "I32d" +#define PRIiFAST32 "I32i" + +#define PRId64 "I64d" +#define PRIi64 "I64i" +#define PRIdLEAST64 "I64d" +#define PRIiLEAST64 "I64i" +#define PRIdFAST64 "I64d" +#define PRIiFAST64 "I64i" + +#define PRIdMAX "I64d" +#define PRIiMAX "I64i" + +#define PRIdPTR "Id" +#define PRIiPTR "Ii" + +// The fprintf macros for unsigned integers are: +#define PRIo8 "o" +#define PRIu8 "u" +#define PRIx8 "x" +#define PRIX8 "X" +#define PRIoLEAST8 "o" +#define PRIuLEAST8 "u" +#define PRIxLEAST8 "x" +#define PRIXLEAST8 "X" +#define PRIoFAST8 "o" +#define PRIuFAST8 "u" +#define PRIxFAST8 "x" +#define PRIXFAST8 "X" + +#define PRIo16 "ho" +#define PRIu16 "hu" +#define PRIx16 "hx" +#define PRIX16 "hX" +#define PRIoLEAST16 "ho" +#define PRIuLEAST16 "hu" +#define PRIxLEAST16 "hx" +#define PRIXLEAST16 "hX" +#define PRIoFAST16 "ho" +#define PRIuFAST16 "hu" +#define PRIxFAST16 "hx" +#define PRIXFAST16 "hX" + +#define PRIo32 "I32o" +#define PRIu32 "I32u" +#define PRIx32 "I32x" +#define PRIX32 "I32X" +#define PRIoLEAST32 "I32o" +#define PRIuLEAST32 "I32u" +#define PRIxLEAST32 "I32x" +#define PRIXLEAST32 "I32X" +#define PRIoFAST32 "I32o" +#define PRIuFAST32 "I32u" +#define PRIxFAST32 "I32x" +#define PRIXFAST32 "I32X" + +#define PRIo64 "I64o" +#define PRIu64 "I64u" +#define PRIx64 "I64x" +#define PRIX64 "I64X" +#define PRIoLEAST64 "I64o" +#define PRIuLEAST64 "I64u" +#define PRIxLEAST64 "I64x" +#define PRIXLEAST64 "I64X" +#define PRIoFAST64 "I64o" +#define PRIuFAST64 "I64u" +#define PRIxFAST64 "I64x" +#define PRIXFAST64 "I64X" + +#define PRIoMAX "I64o" +#define PRIuMAX "I64u" +#define PRIxMAX "I64x" +#define PRIXMAX "I64X" + +#define PRIoPTR "Io" +#define PRIuPTR "Iu" +#define PRIxPTR "Ix" +#define PRIXPTR "IX" + +// The fscanf macros for signed integers are: +#define SCNd8 "d" +#define SCNi8 "i" +#define SCNdLEAST8 "d" +#define SCNiLEAST8 "i" +#define SCNdFAST8 "d" +#define SCNiFAST8 "i" + +#define SCNd16 "hd" +#define SCNi16 "hi" +#define SCNdLEAST16 "hd" +#define SCNiLEAST16 "hi" +#define SCNdFAST16 "hd" +#define SCNiFAST16 "hi" + +#define SCNd32 "ld" +#define SCNi32 "li" +#define SCNdLEAST32 "ld" +#define SCNiLEAST32 "li" +#define SCNdFAST32 "ld" +#define SCNiFAST32 "li" + +#define SCNd64 "I64d" +#define SCNi64 "I64i" +#define SCNdLEAST64 "I64d" +#define SCNiLEAST64 "I64i" +#define SCNdFAST64 "I64d" +#define SCNiFAST64 "I64i" + +#define SCNdMAX "I64d" +#define SCNiMAX "I64i" + +#ifdef _WIN64 // [ +# define SCNdPTR "I64d" +# define SCNiPTR "I64i" +#else // _WIN64 ][ +# define SCNdPTR "ld" +# define SCNiPTR "li" +#endif // _WIN64 ] + +// The fscanf macros for unsigned integers are: +#define SCNo8 "o" +#define SCNu8 "u" +#define SCNx8 "x" +#define SCNX8 "X" +#define SCNoLEAST8 "o" +#define SCNuLEAST8 "u" +#define SCNxLEAST8 "x" +#define SCNXLEAST8 "X" +#define SCNoFAST8 "o" +#define SCNuFAST8 "u" +#define SCNxFAST8 "x" +#define SCNXFAST8 "X" + +#define SCNo16 "ho" +#define SCNu16 "hu" +#define SCNx16 "hx" +#define SCNX16 "hX" +#define SCNoLEAST16 "ho" +#define SCNuLEAST16 "hu" +#define SCNxLEAST16 "hx" +#define SCNXLEAST16 "hX" +#define SCNoFAST16 "ho" +#define SCNuFAST16 "hu" +#define SCNxFAST16 "hx" +#define SCNXFAST16 "hX" + +#define SCNo32 "lo" +#define SCNu32 "lu" +#define SCNx32 "lx" +#define SCNX32 "lX" +#define SCNoLEAST32 "lo" +#define SCNuLEAST32 "lu" +#define SCNxLEAST32 "lx" +#define SCNXLEAST32 "lX" +#define SCNoFAST32 "lo" +#define SCNuFAST32 "lu" +#define SCNxFAST32 "lx" +#define SCNXFAST32 "lX" + +#define SCNo64 "I64o" +#define SCNu64 "I64u" +#define SCNx64 "I64x" +#define SCNX64 "I64X" +#define SCNoLEAST64 "I64o" +#define SCNuLEAST64 "I64u" +#define SCNxLEAST64 "I64x" +#define SCNXLEAST64 "I64X" +#define SCNoFAST64 "I64o" +#define SCNuFAST64 "I64u" +#define SCNxFAST64 "I64x" +#define SCNXFAST64 "I64X" + +#define SCNoMAX "I64o" +#define SCNuMAX "I64u" +#define SCNxMAX "I64x" +#define SCNXMAX "I64X" + +#ifdef _WIN64 // [ +# define SCNoPTR "I64o" +# define SCNuPTR "I64u" +# define SCNxPTR "I64x" +# define SCNXPTR "I64X" +#else // _WIN64 ][ +# define SCNoPTR "lo" +# define SCNuPTR "lu" +# define SCNxPTR "lx" +# define SCNXPTR "lX" +#endif // _WIN64 ] + +// 7.8.2 Functions for greatest-width integer types + +// 7.8.2.1 The imaxabs function +#define imaxabs _abs64 + +// 7.8.2.2 The imaxdiv function + +// This is modified version of div() function from Microsoft's div.c found +// in %MSVC.NET%\crt\src\div.c +#ifdef STATIC_IMAXDIV // [ +static +#else // STATIC_IMAXDIV ][ +_inline +#endif // STATIC_IMAXDIV ] +imaxdiv_t __cdecl imaxdiv(intmax_t numer, intmax_t denom) +{ + imaxdiv_t result; + + result.quot = numer / denom; + result.rem = numer % denom; + + if (numer < 0 && result.rem > 0) { + // did division wrong; must fix up + ++result.quot; + result.rem -= denom; + } + + return result; +} + +// 7.8.2.3 The strtoimax and strtoumax functions +#define strtoimax _strtoi64 +#define strtoumax _strtoui64 + +// 7.8.2.4 The wcstoimax and wcstoumax functions +#define wcstoimax _wcstoi64 +#define wcstoumax _wcstoui64 + + +#endif // _MSC_INTTYPES_H_ ] diff --git a/host/msvc/stdint.h b/host/msvc/stdint.h new file mode 100644 index 000000000..15333b467 --- /dev/null +++ b/host/msvc/stdint.h @@ -0,0 +1,226 @@ +// ISO C9x compliant stdint.h for Microsoft Visual Studio +// Based on ISO/IEC 9899:TC2 Committee draft (May 6, 2005) WG14/N1124 +// +// Copyright (c) 2006 Alexander Chemeris +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are met: +// +// 1. Redistributions of source code must retain the above copyright notice, +// this list of conditions and the following disclaimer. +// +// 2. Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the distribution. +// +// 3. The name of the author may be used to endorse or promote products +// derived from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +// WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +// EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +// OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +// WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +// OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +/////////////////////////////////////////////////////////////////////////////// + +#ifndef _MSC_VER // [ +#error "Use this header only with Microsoft Visual C++ compilers!" +#endif // _MSC_VER ] + +#ifndef _MSC_STDINT_H_ // [ +#define _MSC_STDINT_H_ + +#if _MSC_VER > 1000 +#pragma once +#endif + +#include <limits.h> + +// For Visual Studio 6 in C++ mode wrap <wchar.h> include with 'extern "C++" {}' +// or compiler give many errors like this: +// error C2733: second C linkage of overloaded function 'wmemchr' not allowed +#if (_MSC_VER < 1300) && defined(__cplusplus) + extern "C++" { +#endif +# include <wchar.h> +#if (_MSC_VER < 1300) && defined(__cplusplus) + } +#endif + +// 7.18.1 Integer types + +// 7.18.1.1 Exact-width integer types +typedef __int8 int8_t; +typedef __int16 int16_t; +typedef __int32 int32_t; +typedef __int64 int64_t; +typedef unsigned __int8 uint8_t; +typedef unsigned __int16 uint16_t; +typedef unsigned __int32 uint32_t; +typedef unsigned __int64 uint64_t; + +// 7.18.1.2 Minimum-width integer types +typedef int8_t int_least8_t; +typedef int16_t int_least16_t; +typedef int32_t int_least32_t; +typedef int64_t int_least64_t; +typedef uint8_t uint_least8_t; +typedef uint16_t uint_least16_t; +typedef uint32_t uint_least32_t; +typedef uint64_t uint_least64_t; + +// 7.18.1.3 Fastest minimum-width integer types +typedef int8_t int_fast8_t; +typedef int16_t int_fast16_t; +typedef int32_t int_fast32_t; +typedef int64_t int_fast64_t; +typedef uint8_t uint_fast8_t; +typedef uint16_t uint_fast16_t; +typedef uint32_t uint_fast32_t; +typedef uint64_t uint_fast64_t; + +// 7.18.1.4 Integer types capable of holding object pointers +#ifdef _WIN64 // [ + typedef __int64 intptr_t; + typedef unsigned __int64 uintptr_t; +#else // _WIN64 ][ + typedef int intptr_t; + typedef unsigned int uintptr_t; +#endif // _WIN64 ] + +// 7.18.1.5 Greatest-width integer types +typedef int64_t intmax_t; +typedef uint64_t uintmax_t; + + +// 7.18.2 Limits of specified-width integer types + +#if !defined(__cplusplus) || defined(__STDC_LIMIT_MACROS) // [ See footnote 220 at page 257 and footnote 221 at page 259 + +// 7.18.2.1 Limits of exact-width integer types +#define INT8_MIN ((int8_t)_I8_MIN) +#define INT8_MAX _I8_MAX +#define INT16_MIN ((int16_t)_I16_MIN) +#define INT16_MAX _I16_MAX +#define INT32_MIN ((int32_t)_I32_MIN) +#define INT32_MAX _I32_MAX +#define INT64_MIN ((int64_t)_I64_MIN) +#define INT64_MAX _I64_MAX +#define UINT8_MAX _UI8_MAX +#define UINT16_MAX _UI16_MAX +#define UINT32_MAX _UI32_MAX +#define UINT64_MAX _UI64_MAX + +// 7.18.2.2 Limits of minimum-width integer types +#define INT_LEAST8_MIN INT8_MIN +#define INT_LEAST8_MAX INT8_MAX +#define INT_LEAST16_MIN INT16_MIN +#define INT_LEAST16_MAX INT16_MAX +#define INT_LEAST32_MIN INT32_MIN +#define INT_LEAST32_MAX INT32_MAX +#define INT_LEAST64_MIN INT64_MIN +#define INT_LEAST64_MAX INT64_MAX +#define UINT_LEAST8_MAX UINT8_MAX +#define UINT_LEAST16_MAX UINT16_MAX +#define UINT_LEAST32_MAX UINT32_MAX +#define UINT_LEAST64_MAX UINT64_MAX + +// 7.18.2.3 Limits of fastest minimum-width integer types +#define INT_FAST8_MIN INT8_MIN +#define INT_FAST8_MAX INT8_MAX +#define INT_FAST16_MIN INT16_MIN +#define INT_FAST16_MAX INT16_MAX +#define INT_FAST32_MIN INT32_MIN +#define INT_FAST32_MAX INT32_MAX +#define INT_FAST64_MIN INT64_MIN +#define INT_FAST64_MAX INT64_MAX +#define UINT_FAST8_MAX UINT8_MAX +#define UINT_FAST16_MAX UINT16_MAX +#define UINT_FAST32_MAX UINT32_MAX +#define UINT_FAST64_MAX UINT64_MAX + +// 7.18.2.4 Limits of integer types capable of holding object pointers +#ifdef _WIN64 // [ +# define INTPTR_MIN INT64_MIN +# define INTPTR_MAX INT64_MAX +# define UINTPTR_MAX UINT64_MAX +#else // _WIN64 ][ +# define INTPTR_MIN INT32_MIN +# define INTPTR_MAX INT32_MAX +# define UINTPTR_MAX UINT32_MAX +#endif // _WIN64 ] + +// 7.18.2.5 Limits of greatest-width integer types +#define INTMAX_MIN INT64_MIN +#define INTMAX_MAX INT64_MAX +#define UINTMAX_MAX UINT64_MAX + +// 7.18.3 Limits of other integer types + +#ifdef _WIN64 // [ +# define PTRDIFF_MIN _I64_MIN +# define PTRDIFF_MAX _I64_MAX +#else // _WIN64 ][ +# define PTRDIFF_MIN _I32_MIN +# define PTRDIFF_MAX _I32_MAX +#endif // _WIN64 ] + +#define SIG_ATOMIC_MIN INT_MIN +#define SIG_ATOMIC_MAX INT_MAX + +#ifndef SIZE_MAX // [ +# ifdef _WIN64 // [ +# define SIZE_MAX _UI64_MAX +# else // _WIN64 ][ +# define SIZE_MAX _UI32_MAX +# endif // _WIN64 ] +#endif // SIZE_MAX ] + +// WCHAR_MIN and WCHAR_MAX are also defined in <wchar.h> +#ifndef WCHAR_MIN // [ +# define WCHAR_MIN 0 +#endif // WCHAR_MIN ] +#ifndef WCHAR_MAX // [ +# define WCHAR_MAX _UI16_MAX +#endif // WCHAR_MAX ] + +#define WINT_MIN 0 +#define WINT_MAX _UI16_MAX + +#endif // __STDC_LIMIT_MACROS ] + + +// 7.18.4 Limits of other integer types + +#if !defined(__cplusplus) || defined(__STDC_CONSTANT_MACROS) // [ See footnote 224 at page 260 + +// 7.18.4.1 Macros for minimum-width integer constants + +#define INT8_C(val) val##i8 +#define INT16_C(val) val##i16 +#define INT32_C(val) val##i32 +#define INT64_C(val) val##i64 + +#define UINT8_C(val) val##ui8 +#define UINT16_C(val) val##ui16 +#define UINT32_C(val) val##ui32 +#define UINT64_C(val) val##ui64 + +// 7.18.4.2 Macros for greatest-width integer constants +#ifndef INTMAX_C +#define INTMAX_C INT64_C +#endif +#ifndef UINTMAX_C +#define UINTMAX_C UINT64_C +#endif + +#endif // __STDC_CONSTANT_MACROS ] + + +#endif // _MSC_STDINT_H_ ] diff --git a/host/tests/CMakeLists.txt b/host/tests/CMakeLists.txt new file mode 100644 index 000000000..79b20cd47 --- /dev/null +++ b/host/tests/CMakeLists.txt @@ -0,0 +1,58 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# unit test suite +######################################################################## +SET(test_sources + addr_test.cpp + buffer_test.cpp + byteswap_test.cpp + convert_test.cpp + dict_test.cpp + error_test.cpp + gain_group_test.cpp + ranges_test.cpp + subdev_spec_test.cpp + time_spec_test.cpp + tune_helper_test.cpp + vrt_test.cpp + warning_test.cpp + wax_test.cpp +) + +#turn each test cpp file into an executable with an int main() function +ADD_DEFINITIONS(-DBOOST_TEST_DYN_LINK -DBOOST_TEST_MAIN) + +#for each source: build an executable, register it as a test, and install +FOREACH(test_source ${test_sources}) + GET_FILENAME_COMPONENT(test_name ${test_source} NAME_WE) + ADD_EXECUTABLE(${test_name} ${test_source}) + TARGET_LINK_LIBRARIES(${test_name} uhd) + ADD_TEST(${test_name} ${test_name}) + INSTALL(TARGETS ${test_name} RUNTIME DESTINATION ${PKG_DATA_DIR}/tests) +ENDFOREACH(test_source) + +######################################################################## +# demo of a loadable module +######################################################################## +ADD_LIBRARY(module_test MODULE module_test.cpp) +TARGET_LINK_LIBRARIES(module_test uhd) + +INSTALL(TARGETS + RUNTIME DESTINATION ${PKG_DATA_DIR}/tests +) diff --git a/host/tests/addr_test.cpp b/host/tests/addr_test.cpp new file mode 100644 index 000000000..d4b45aa1a --- /dev/null +++ b/host/tests/addr_test.cpp @@ -0,0 +1,80 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/test/unit_test.hpp> +#include <uhd/types/mac_addr.hpp> +#include <uhd/types/device_addr.hpp> +#include <uhd/usrp/dboard_id.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/foreach.hpp> +#include <algorithm> +#include <iostream> + +BOOST_AUTO_TEST_CASE(test_mac_addr){ + std::cout << "Testing mac addr..." << std::endl; + const std::string mac_addr_str("00:01:23:45:67:89"); + uhd::mac_addr_t mac_addr = uhd::mac_addr_t::from_string(mac_addr_str); + std::cout << "Input: " << mac_addr_str << std::endl; + std::cout << "Output: " << mac_addr.to_string() << std::endl; + BOOST_CHECK_EQUAL(mac_addr_str, mac_addr.to_string()); +} + +BOOST_AUTO_TEST_CASE(test_device_addr){ + std::cout << "Testing device addr..." << std::endl; + + //load the device address with something + uhd::device_addr_t dev_addr; + dev_addr["key1"] = "val1"; + dev_addr["key2"] = "val2"; + + //convert to and from args string + std::cout << "Pretty Print: " << std::endl << dev_addr.to_pp_string(); + std::string args_str = dev_addr.to_string(); + std::cout << "Args String: " << args_str << std::endl; + uhd::device_addr_t new_dev_addr(args_str); + + //they should be the same size + BOOST_REQUIRE_EQUAL(dev_addr.size(), new_dev_addr.size()); + + //the keys should match + std::vector<std::string> old_dev_addr_keys = dev_addr.keys(); + std::vector<std::string> new_dev_addr_keys = new_dev_addr.keys(); + BOOST_CHECK_EQUAL_COLLECTIONS( + old_dev_addr_keys.begin(), old_dev_addr_keys.end(), + new_dev_addr_keys.begin(), new_dev_addr_keys.end() + ); + + //the vals should match + std::vector<std::string> old_dev_addr_vals = dev_addr.vals(); + std::vector<std::string> new_dev_addr_vals = new_dev_addr.vals(); + BOOST_CHECK_EQUAL_COLLECTIONS( + old_dev_addr_vals.begin(), old_dev_addr_vals.end(), + new_dev_addr_vals.begin(), new_dev_addr_vals.end() + ); +} + +BOOST_AUTO_TEST_CASE(test_dboard_id){ + std::cout << "Testing dboard id..." << std::endl; + + using namespace uhd::usrp; + + BOOST_CHECK(dboard_id_t() == dboard_id_t::none()); + BOOST_CHECK_EQUAL(dboard_id_t().to_uint16(), dboard_id_t::none().to_uint16()); + BOOST_CHECK_EQUAL(dboard_id_t::from_string("0x1234").to_uint16(), 0x1234); + BOOST_CHECK_EQUAL(dboard_id_t::from_string("1234").to_uint16(), 1234); + std::cout << "Pretty Print: " << std::endl << dboard_id_t::none().to_pp_string(); +} diff --git a/host/tests/buffer_test.cpp b/host/tests/buffer_test.cpp new file mode 100644 index 000000000..23b52a9bf --- /dev/null +++ b/host/tests/buffer_test.cpp @@ -0,0 +1,64 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/test/unit_test.hpp> +#include <uhd/transport/bounded_buffer.hpp> +#include <boost/assign/list_of.hpp> + +using namespace boost::assign; +using namespace uhd::transport; + +static const double timeout = 0.01/*secs*/; + +BOOST_AUTO_TEST_CASE(test_bounded_buffer_with_timed_wait){ + bounded_buffer<int> bb(3); + + //push elements, check for timeout + BOOST_CHECK(bb.push_with_timed_wait(0, timeout)); + BOOST_CHECK(bb.push_with_timed_wait(1, timeout)); + BOOST_CHECK(bb.push_with_timed_wait(2, timeout)); + BOOST_CHECK(not bb.push_with_timed_wait(3, timeout)); + + int val; + //pop elements, check for timeout and check values + BOOST_CHECK(bb.pop_with_timed_wait(val, timeout)); + BOOST_CHECK_EQUAL(val, 0); + BOOST_CHECK(bb.pop_with_timed_wait(val, timeout)); + BOOST_CHECK_EQUAL(val, 1); + BOOST_CHECK(bb.pop_with_timed_wait(val, timeout)); + BOOST_CHECK_EQUAL(val, 2); + BOOST_CHECK(not bb.pop_with_timed_wait(val, timeout)); +} + +BOOST_AUTO_TEST_CASE(test_bounded_buffer_with_pop_on_full){ + bounded_buffer<int> bb(3); + + //push elements, check for timeout + BOOST_CHECK(bb.push_with_pop_on_full(0)); + BOOST_CHECK(bb.push_with_pop_on_full(1)); + BOOST_CHECK(bb.push_with_pop_on_full(2)); + BOOST_CHECK(not bb.push_with_pop_on_full(3)); + + int val; + //pop elements, check for timeout and check values + BOOST_CHECK(bb.pop_with_timed_wait(val, timeout)); + BOOST_CHECK_EQUAL(val, 1); + BOOST_CHECK(bb.pop_with_timed_wait(val, timeout)); + BOOST_CHECK_EQUAL(val, 2); + BOOST_CHECK(bb.pop_with_timed_wait(val, timeout)); + BOOST_CHECK_EQUAL(val, 3); +} diff --git a/host/tests/byteswap_test.cpp b/host/tests/byteswap_test.cpp new file mode 100644 index 000000000..3d50c9bfa --- /dev/null +++ b/host/tests/byteswap_test.cpp @@ -0,0 +1,39 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/test/unit_test.hpp> +#include <uhd/utils/byteswap.hpp> + +BOOST_AUTO_TEST_CASE(test_byteswap16){ + boost::uint16_t x = 0x0123; + boost::uint16_t y = 0x2301; + BOOST_CHECK_EQUAL(uhd::byteswap(x), y); +} + +BOOST_AUTO_TEST_CASE(test_byteswap32){ + boost::uint32_t x = 0x01234567; + boost::uint32_t y = 0x67452301; + BOOST_CHECK_EQUAL(uhd::byteswap(x), y); +} + +BOOST_AUTO_TEST_CASE(test_byteswap64){ + //split up 64 bit constants to avoid long-long compiler warnings + boost::uint64_t x = 0x01234567 | (boost::uint64_t(0x89abcdef) << 32); + boost::uint64_t y = 0xefcdab89 | (boost::uint64_t(0x67452301) << 32); + BOOST_CHECK_EQUAL(uhd::byteswap(x), y); +} + diff --git a/host/tests/convert_test.cpp b/host/tests/convert_test.cpp new file mode 100644 index 000000000..d1c2b7625 --- /dev/null +++ b/host/tests/convert_test.cpp @@ -0,0 +1,262 @@ +// +// Copyright 2011-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/convert.hpp> +#include <boost/test/unit_test.hpp> +#include <boost/foreach.hpp> +#include <boost/cstdint.hpp> +#include <complex> +#include <vector> +#include <cstdlib> +#include <iostream> + +using namespace uhd; + +//typedefs for complex types +typedef std::complex<boost::int16_t> sc16_t; +typedef std::complex<float> fc32_t; +typedef std::complex<double> fc64_t; + +#define MY_CHECK_CLOSE(a, b, f) if ((std::abs(a) > (f) and std::abs(b) > (f))) \ + BOOST_CHECK_CLOSE_FRACTION(a, b, f) + +/*********************************************************************** + * Loopback runner: + * convert input buffer into intermediate buffer + * convert intermediate buffer into output buffer + **********************************************************************/ +template <typename Range> static void loopback( + size_t nsamps, + const io_type_t &io_type, + const otw_type_t &otw_type, + const Range &input, + Range &output +){ + //item32 is largest device type + std::vector<boost::uint32_t> interm(nsamps); + + std::vector<const void *> input0(1, &input[0]), input1(1, &interm[0]); + std::vector<void *> output0(1, &interm[0]), output1(1, &output[0]); + + //convert to intermediate type + convert::get_converter_cpu_to_otw( + io_type, otw_type, input0.size(), output0.size() + )(input0, output0, nsamps); + + //convert back to host type + convert::get_converter_otw_to_cpu( + io_type, otw_type, input1.size(), output1.size() + )(input1, output1, nsamps); +} + +/*********************************************************************** + * Test short conversion + **********************************************************************/ +static void test_convert_types_sc16( + size_t nsamps, + const io_type_t &io_type, + const otw_type_t &otw_type +){ + //fill the input samples + std::vector<sc16_t> input(nsamps), output(nsamps); + BOOST_FOREACH(sc16_t &in, input) in = sc16_t( + std::rand()-(RAND_MAX/2), + std::rand()-(RAND_MAX/2) + ); + + //run the loopback and test + loopback(nsamps, io_type, otw_type, input, output); + BOOST_CHECK_EQUAL_COLLECTIONS(input.begin(), input.end(), output.begin(), output.end()); +} + +BOOST_AUTO_TEST_CASE(test_convert_types_be_sc16){ + io_type_t io_type(io_type_t::COMPLEX_INT16); + otw_type_t otw_type; + otw_type.byteorder = otw_type_t::BO_BIG_ENDIAN; + otw_type.width = 16; + + //try various lengths to test edge cases + for (size_t nsamps = 1; nsamps < 16; nsamps++){ + test_convert_types_sc16(nsamps, io_type, otw_type); + } +} + +BOOST_AUTO_TEST_CASE(test_convert_types_le_sc16){ + io_type_t io_type(io_type_t::COMPLEX_INT16); + otw_type_t otw_type; + otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; + otw_type.width = 16; + + //try various lengths to test edge cases + for (size_t nsamps = 1; nsamps < 16; nsamps++){ + test_convert_types_sc16(nsamps, io_type, otw_type); + } +} + +/*********************************************************************** + * Test float conversion + **********************************************************************/ +template <typename data_type> +static void test_convert_types_for_floats( + size_t nsamps, + const io_type_t &io_type, + const otw_type_t &otw_type +){ + typedef typename data_type::value_type value_type; + + //fill the input samples + std::vector<data_type> input(nsamps), output(nsamps); + BOOST_FOREACH(data_type &in, input) in = data_type( + (std::rand()/value_type(RAND_MAX/2)) - 1, + (std::rand()/value_type(RAND_MAX/2)) - 1 + ); + + //run the loopback and test + loopback(nsamps, io_type, otw_type, input, output); + for (size_t i = 0; i < nsamps; i++){ + MY_CHECK_CLOSE(input[i].real(), output[i].real(), value_type(0.01)); + MY_CHECK_CLOSE(input[i].imag(), output[i].imag(), value_type(0.01)); + } +} + +BOOST_AUTO_TEST_CASE(test_convert_types_be_fc32){ + io_type_t io_type(io_type_t::COMPLEX_FLOAT32); + otw_type_t otw_type; + otw_type.byteorder = otw_type_t::BO_BIG_ENDIAN; + otw_type.width = 16; + + //try various lengths to test edge cases + for (size_t nsamps = 1; nsamps < 16; nsamps++){ + test_convert_types_for_floats<fc32_t>(nsamps, io_type, otw_type); + } +} + +BOOST_AUTO_TEST_CASE(test_convert_types_le_fc32){ + io_type_t io_type(io_type_t::COMPLEX_FLOAT32); + otw_type_t otw_type; + otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; + otw_type.width = 16; + + //try various lengths to test edge cases + for (size_t nsamps = 1; nsamps < 16; nsamps++){ + test_convert_types_for_floats<fc32_t>(nsamps, io_type, otw_type); + } +} + +BOOST_AUTO_TEST_CASE(test_convert_types_be_fc64){ + io_type_t io_type(io_type_t::COMPLEX_FLOAT64); + otw_type_t otw_type; + otw_type.byteorder = otw_type_t::BO_BIG_ENDIAN; + otw_type.width = 16; + + //try various lengths to test edge cases + for (size_t nsamps = 1; nsamps < 16; nsamps++){ + test_convert_types_for_floats<fc64_t>(nsamps, io_type, otw_type); + } +} + +BOOST_AUTO_TEST_CASE(test_convert_types_le_fc64){ + io_type_t io_type(io_type_t::COMPLEX_FLOAT64); + otw_type_t otw_type; + otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; + otw_type.width = 16; + + //try various lengths to test edge cases + for (size_t nsamps = 1; nsamps < 16; nsamps++){ + test_convert_types_for_floats<fc64_t>(nsamps, io_type, otw_type); + } +} + +/*********************************************************************** + * Test float to short conversion loopback + **********************************************************************/ +BOOST_AUTO_TEST_CASE(test_convert_types_fc32_to_sc16){ + io_type_t io_type_in(io_type_t::COMPLEX_FLOAT32); + io_type_t io_type_out(io_type_t::COMPLEX_INT16); + + otw_type_t otw_type; + otw_type.byteorder = otw_type_t::BO_NATIVE; + otw_type.width = 16; + + const size_t nsamps = 13; + std::vector<fc32_t> input(nsamps); + BOOST_FOREACH(fc32_t &in, input) in = fc32_t( + (std::rand()/float(RAND_MAX/2)) - 1, + (std::rand()/float(RAND_MAX/2)) - 1 + ); + std::vector<boost::uint32_t> interm(nsamps); + std::vector<sc16_t> output(nsamps); + + std::vector<const void *> input0(1, &input[0]), input1(1, &interm[0]); + std::vector<void *> output0(1, &interm[0]), output1(1, &output[0]); + + //convert float to intermediate + convert::get_converter_cpu_to_otw( + io_type_in, otw_type, input0.size(), output0.size() + )(input0, output0, nsamps); + + //convert intermediate to short + convert::get_converter_otw_to_cpu( + io_type_out, otw_type, input1.size(), output1.size() + )(input1, output1, nsamps); + + //test that the inputs and outputs match + for (size_t i = 0; i < nsamps; i++){ + MY_CHECK_CLOSE(input[i].real(), output[i].real()/float(32767), float(0.01)); + MY_CHECK_CLOSE(input[i].imag(), output[i].imag()/float(32767), float(0.01)); + } +} + +/*********************************************************************** + * Test short to float conversion loopback + **********************************************************************/ +BOOST_AUTO_TEST_CASE(test_convert_types_sc16_to_fc32){ + io_type_t io_type_in(io_type_t::COMPLEX_INT16); + io_type_t io_type_out(io_type_t::COMPLEX_FLOAT32); + + otw_type_t otw_type; + otw_type.byteorder = otw_type_t::BO_NATIVE; + otw_type.width = 16; + + const size_t nsamps = 13; + std::vector<sc16_t> input(nsamps); + BOOST_FOREACH(sc16_t &in, input) in = sc16_t( + std::rand()-(RAND_MAX/2), + std::rand()-(RAND_MAX/2) + ); + std::vector<boost::uint32_t> interm(nsamps); + std::vector<fc32_t> output(nsamps); + + std::vector<const void *> input0(1, &input[0]), input1(1, &interm[0]); + std::vector<void *> output0(1, &interm[0]), output1(1, &output[0]); + + //convert short to intermediate + convert::get_converter_cpu_to_otw( + io_type_in, otw_type, input0.size(), output0.size() + )(input0, output0, nsamps); + + //convert intermediate to float + convert::get_converter_otw_to_cpu( + io_type_out, otw_type, input1.size(), output1.size() + )(input1, output1, nsamps); + + //test that the inputs and outputs match + for (size_t i = 0; i < nsamps; i++){ + MY_CHECK_CLOSE(input[i].real()/float(32767), output[i].real(), float(0.01)); + MY_CHECK_CLOSE(input[i].imag()/float(32767), output[i].imag(), float(0.01)); + } +} diff --git a/host/tests/dict_test.cpp b/host/tests/dict_test.cpp new file mode 100644 index 000000000..0501a7878 --- /dev/null +++ b/host/tests/dict_test.cpp @@ -0,0 +1,72 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/test/unit_test.hpp> +#include <uhd/types/dict.hpp> +#include <boost/assign/list_of.hpp> + +BOOST_AUTO_TEST_CASE(test_dict_init){ + uhd::dict<int, int> d; + d[-1] = 3; + d[0] = 4; + d[1] = 5; + BOOST_CHECK(d.has_key(0)); + BOOST_CHECK(not d.has_key(2)); + BOOST_CHECK(d.keys()[1] == 0); + BOOST_CHECK(d.vals()[1] == 4); + BOOST_CHECK_EQUAL(d[-1], 3); +} + +BOOST_AUTO_TEST_CASE(test_dict_assign){ + uhd::dict<int, int> d = boost::assign::map_list_of + (-1, 3) + (0, 4) + (1, 5) + ; + BOOST_CHECK(d.has_key(0)); + BOOST_CHECK(not d.has_key(2)); + BOOST_CHECK(d.keys()[1] == 0); + BOOST_CHECK(d.vals()[1] == 4); + BOOST_CHECK_EQUAL(d[-1], 3); +} + +BOOST_AUTO_TEST_CASE(test_const_dict){ + const uhd::dict<int, int> d = boost::assign::map_list_of + (-1, 3) + (0, 4) + (1, 5) + ; + BOOST_CHECK(d.has_key(0)); + BOOST_CHECK(not d.has_key(2)); + BOOST_CHECK(d.keys()[1] == 0); + BOOST_CHECK(d.vals()[1] == 4); + BOOST_CHECK_EQUAL(d[-1], 3); + BOOST_CHECK_THROW(d[2], std::exception); +} + +BOOST_AUTO_TEST_CASE(test_dict_pop){ + uhd::dict<int, int> d = boost::assign::map_list_of + (-1, 3) + (0, 4) + (1, 5) + ; + BOOST_CHECK(d.has_key(0)); + BOOST_CHECK_EQUAL(d.pop(0), 4); + BOOST_CHECK(not d.has_key(0)); + BOOST_CHECK(d.keys()[0] == -1); + BOOST_CHECK(d.keys()[1] == 1); +} diff --git a/host/tests/error_test.cpp b/host/tests/error_test.cpp new file mode 100644 index 000000000..983f0150c --- /dev/null +++ b/host/tests/error_test.cpp @@ -0,0 +1,59 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/test/unit_test.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/assert_has.hpp> +#include <vector> +#include <iostream> + +BOOST_AUTO_TEST_CASE(test_exception_methods){ + try{ + throw uhd::assertion_error("your assertion failed: 1 != 2"); + } + catch(const uhd::exception &e){ + std::cout << "what: " << e.what() << std::endl; + std::cout << "code: " << e.code() << std::endl; + } +} + +BOOST_AUTO_TEST_CASE(test_assert_has){ + std::vector<int> vec; + vec.push_back(2); + vec.push_back(3); + vec.push_back(5); + + //verify the uhd::has utility + BOOST_CHECK(uhd::has(vec, 2)); + BOOST_CHECK(not uhd::has(vec, 1)); + + std::cout << "The output of the assert_has error:" << std::endl; + try{ + uhd::assert_has(vec, 1, "prime"); + }catch(const std::exception &e){ + std::cout << e.what() << std::endl; + } +} + +BOOST_AUTO_TEST_CASE(test_assert_throw){ + std::cout << "The output of the assert throw error:" << std::endl; + try{ + UHD_ASSERT_THROW(2 + 2 == 5); + }catch(const std::exception &e){ + std::cout << e.what() << std::endl; + } +} diff --git a/host/tests/gain_group_test.cpp b/host/tests/gain_group_test.cpp new file mode 100644 index 000000000..07eaf146e --- /dev/null +++ b/host/tests/gain_group_test.cpp @@ -0,0 +1,122 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/test/unit_test.hpp> +#include <uhd/utils/gain_group.hpp> +#include <boost/bind.hpp> +#include <boost/math/special_functions/round.hpp> +#include <iostream> + +#define rint(x) boost::math::iround(x) + +using namespace uhd; + +/*********************************************************************** + * Define gain element classes with needed functions + **********************************************************************/ +class gain_element1{ +public: + + gain_range_t get_range(void){ + return gain_range_t(0, 90, 1); + } + + double get_value(void){ + return _gain; + } + + void set_value(double gain){ + double step = get_range().step(); + _gain = step*rint(gain/step); + } + +private: + double _gain; +}; + +class gain_element2{ +public: + + gain_range_t get_range(void){ + return gain_range_t(-20, 10, 0.1); + } + + double get_value(void){ + return _gain; + } + + void set_value(double gain){ + double step = get_range().step(); + _gain = step*rint(gain/step); + } + +private: + double _gain; +}; + +//create static instances of gain elements to be shared by the tests +static gain_element1 g1; +static gain_element2 g2; + +static gain_group::sptr get_gain_group(size_t pri1 = 0, size_t pri2 = 0){ + //create instance of gain group + gain_fcns_t gain_fcns; + gain_group::sptr gg(gain_group::make()); + + //load gain group with function sets + gain_fcns.get_range = boost::bind(&gain_element1::get_range, &g1); + gain_fcns.get_value = boost::bind(&gain_element1::get_value, &g1); + gain_fcns.set_value = boost::bind(&gain_element1::set_value, &g1, _1); + gg->register_fcns("g1", gain_fcns, pri1); + + gain_fcns.get_range = boost::bind(&gain_element2::get_range, &g2); + gain_fcns.get_value = boost::bind(&gain_element2::get_value, &g2); + gain_fcns.set_value = boost::bind(&gain_element2::set_value, &g2, _1); + gg->register_fcns("g2", gain_fcns, pri2); + + return gg; +} + +/*********************************************************************** + * Test cases + **********************************************************************/ +static const double tolerance = 0.001; + +BOOST_AUTO_TEST_CASE(test_gain_group_overall){ + gain_group::sptr gg = get_gain_group(); + + //test the overall stuff + gg->set_value(80); + BOOST_CHECK_CLOSE(gg->get_value(), 80.0, tolerance); + BOOST_CHECK_CLOSE(gg->get_range().start(), -20.0, tolerance); + BOOST_CHECK_CLOSE(gg->get_range().stop(), 100.0, tolerance); + BOOST_CHECK_CLOSE(gg->get_range().step(), 0.1, tolerance); +} + +BOOST_AUTO_TEST_CASE(test_gain_group_priority){ + gain_group::sptr gg = get_gain_group(0, 1); + + //test the overall stuff + gg->set_value(80); + BOOST_CHECK_CLOSE(gg->get_value(), 80.0, tolerance); + BOOST_CHECK_CLOSE(gg->get_range().start(), -20.0, tolerance); + BOOST_CHECK_CLOSE(gg->get_range().stop(), 100.0, tolerance); + BOOST_CHECK_CLOSE(gg->get_range().step(), 0.1, tolerance); + + //test the the higher priority gain got filled first (gain 2) + BOOST_CHECK_CLOSE(g2.get_value(), g2.get_range().stop(), tolerance); +} diff --git a/host/tests/module_test.cpp b/host/tests/module_test.cpp new file mode 100644 index 000000000..47a0e1af9 --- /dev/null +++ b/host/tests/module_test.cpp @@ -0,0 +1,26 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/static.hpp> +#include <iostream> + +UHD_STATIC_BLOCK(module_test){ + std::cout << "---------------------------------------" << std::endl; + std::cout << "-- Good news, everyone!" << std::endl; + std::cout << "-- The test module has been loaded." << std::endl; + std::cout << "---------------------------------------" << std::endl; +} diff --git a/host/tests/ranges_test.cpp b/host/tests/ranges_test.cpp new file mode 100644 index 000000000..5f6de4645 --- /dev/null +++ b/host/tests/ranges_test.cpp @@ -0,0 +1,57 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/test/unit_test.hpp> +#include <uhd/types/ranges.hpp> +#include <iostream> + +using namespace uhd; + +static const double tolerance = 0.001; + +BOOST_AUTO_TEST_CASE(test_ranges_bounds){ + meta_range_t mr; + mr.push_back(range_t(-1.0, +1.0, 0.1)); + BOOST_CHECK_CLOSE(mr.start(), -1.0, tolerance); + BOOST_CHECK_CLOSE(mr.stop(), +1.0, tolerance); + BOOST_CHECK_CLOSE(mr.step(), 0.1, tolerance); + + mr.push_back(range_t(40.0, 60.0, 1.0)); + BOOST_CHECK_CLOSE(mr.start(), -1.0, tolerance); + BOOST_CHECK_CLOSE(mr.stop(), 60.0, tolerance); + BOOST_CHECK_CLOSE(mr.step(), 0.1, tolerance); + + BOOST_CHECK_EQUAL(mr.size(), unsigned(2)); + + BOOST_CHECK_CLOSE(mr[0].start(), -1.0, tolerance); + BOOST_CHECK_CLOSE(mr[0].stop(), +1.0, tolerance); + BOOST_CHECK_CLOSE(mr[0].step(), 0.1, tolerance); +} + +BOOST_AUTO_TEST_CASE(test_ranges_clip){ + meta_range_t mr; + mr.push_back(range_t(-1.0, +1.0, 0.1)); + mr.push_back(range_t(40.0, 60.0, 1.0)); + + BOOST_CHECK_CLOSE(mr.clip(-30.0), -1.0, tolerance); + BOOST_CHECK_CLOSE(mr.clip(70.0), 60.0, tolerance); + BOOST_CHECK_CLOSE(mr.clip(20.0), 1.0, tolerance); + BOOST_CHECK_CLOSE(mr.clip(50.0), 50.0, tolerance); + + BOOST_CHECK_CLOSE(mr.clip(50.9, false), 50.9, tolerance); + BOOST_CHECK_CLOSE(mr.clip(50.9, true), 51.0, tolerance); +} diff --git a/host/tests/subdev_spec_test.cpp b/host/tests/subdev_spec_test.cpp new file mode 100644 index 000000000..8817d5eee --- /dev/null +++ b/host/tests/subdev_spec_test.cpp @@ -0,0 +1,45 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/test/unit_test.hpp> +#include <uhd/usrp/subdev_spec.hpp> +#include <boost/foreach.hpp> +#include <iostream> + +BOOST_AUTO_TEST_CASE(test_subdevice_spec){ + std::cout << "Testing subdevice specification..." << std::endl; + + //load the subdev spec with something + uhd::usrp::subdev_spec_t sd_spec; + sd_spec.push_back(uhd::usrp::subdev_spec_pair_t("A", "AB")); + sd_spec.push_back(uhd::usrp::subdev_spec_pair_t("B", "AB")); + + //convert to and from args string + std::cout << "Pretty Print: " << std::endl << sd_spec.to_pp_string(); + std::string markup_str = sd_spec.to_string(); + std::cout << "Markup String: " << markup_str << std::endl; + uhd::usrp::subdev_spec_t new_sd_spec(markup_str); + + //they should be the same size + BOOST_REQUIRE_EQUAL(sd_spec.size(), new_sd_spec.size()); + + //the contents should match + for (size_t i = 0; i < sd_spec.size(); i++){ + BOOST_CHECK_EQUAL(sd_spec.at(i).db_name, new_sd_spec.at(i).db_name); + BOOST_CHECK_EQUAL(sd_spec.at(i).sd_name, new_sd_spec.at(i).sd_name); + } +} diff --git a/host/tests/time_spec_test.cpp b/host/tests/time_spec_test.cpp new file mode 100644 index 000000000..070392f93 --- /dev/null +++ b/host/tests/time_spec_test.cpp @@ -0,0 +1,80 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/test/unit_test.hpp> +#include <uhd/types/time_spec.hpp> +#include <boost/foreach.hpp> +#include <boost/thread.hpp> //sleep +#include <iostream> + +BOOST_AUTO_TEST_CASE(test_time_spec_compare){ + std::cout << "Testing time specification compare..." << std::endl; + + BOOST_CHECK(uhd::time_spec_t(2.0) == uhd::time_spec_t(2.0)); + BOOST_CHECK(uhd::time_spec_t(2.0) > uhd::time_spec_t(1.0)); + BOOST_CHECK(uhd::time_spec_t(1.0) < uhd::time_spec_t(2.0)); + + BOOST_CHECK(uhd::time_spec_t(1.1) == uhd::time_spec_t(1.1)); + BOOST_CHECK(uhd::time_spec_t(1.1) > uhd::time_spec_t(1.0)); + BOOST_CHECK(uhd::time_spec_t(1.0) < uhd::time_spec_t(1.1)); + + BOOST_CHECK(uhd::time_spec_t(0.1) == uhd::time_spec_t(0.1)); + BOOST_CHECK(uhd::time_spec_t(0.2) > uhd::time_spec_t(0.1)); + BOOST_CHECK(uhd::time_spec_t(0.1) < uhd::time_spec_t(0.2)); +} + +#define CHECK_TS_EQUAL(lhs, rhs) \ + BOOST_CHECK_CLOSE((lhs).get_real_secs(), (rhs).get_real_secs(), 0.001) + +BOOST_AUTO_TEST_CASE(test_time_spec_arithmetic){ + std::cout << "Testing time specification arithmetic..." << std::endl; + + CHECK_TS_EQUAL(uhd::time_spec_t(2.3) + uhd::time_spec_t(1.0), uhd::time_spec_t(3.3)); + CHECK_TS_EQUAL(uhd::time_spec_t(2.3) - uhd::time_spec_t(1.0), uhd::time_spec_t(1.3)); + CHECK_TS_EQUAL(uhd::time_spec_t(1.0) + uhd::time_spec_t(2.3), uhd::time_spec_t(3.3)); + CHECK_TS_EQUAL(uhd::time_spec_t(1.0) - uhd::time_spec_t(2.3), uhd::time_spec_t(-1.3)); +} + +BOOST_AUTO_TEST_CASE(test_time_spec_parts){ + std::cout << "Testing time specification parts..." << std::endl; + + BOOST_CHECK_EQUAL(uhd::time_spec_t(1.1).get_full_secs(), 1); + BOOST_CHECK_CLOSE(uhd::time_spec_t(1.1).get_frac_secs(), 0.1, 0.001); + BOOST_CHECK_EQUAL(uhd::time_spec_t(1.1).get_tick_count(100), 10); + + BOOST_CHECK_EQUAL(uhd::time_spec_t(-1.1).get_full_secs(), -1); + BOOST_CHECK_CLOSE(uhd::time_spec_t(-1.1).get_frac_secs(), -0.1, 0.001); + BOOST_CHECK_EQUAL(uhd::time_spec_t(-1.1).get_tick_count(100), -10); +} + +BOOST_AUTO_TEST_CASE(test_time_spec_get_system_time){ + std::cout << "Testing time specification get system time..." << std::endl; + + //Not really checking for high resolution timing here, + //just need to check that system time is minimally working. + + uhd::time_spec_t start = uhd::time_spec_t::get_system_time(); + boost::this_thread::sleep(boost::posix_time::milliseconds(500)); + uhd::time_spec_t stop = uhd::time_spec_t::get_system_time(); + + uhd::time_spec_t diff = stop - start; + std::cout << "start: " << start.get_real_secs() << std::endl; + std::cout << "stop: " << stop.get_real_secs() << std::endl; + std::cout << "diff: " << diff.get_real_secs() << std::endl; + BOOST_CHECK(diff.get_real_secs() > 0); //assert positive + BOOST_CHECK(diff.get_real_secs() < 1.0); //assert under 1s +} diff --git a/host/tests/tune_helper_test.cpp b/host/tests/tune_helper_test.cpp new file mode 100644 index 000000000..aabaaaf6e --- /dev/null +++ b/host/tests/tune_helper_test.cpp @@ -0,0 +1,251 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/test/unit_test.hpp> +#include <uhd/usrp/tune_helper.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/usrp/dsp_props.hpp> +#include <uhd/usrp/dsp_utils.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * Dummy properties objects + **********************************************************************/ +class dummy_subdev : public wax::obj{ +public: + dummy_subdev(double resolution): + _resolution(resolution) + { + /* NOP */ + } +private: + void get(const wax::obj &key, wax::obj &val){ + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + val = _freq; + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } + } + + void set(const wax::obj &key, const wax::obj &val){ + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_FREQ: + _freq = _resolution*int(val.as<double>()/_resolution); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } + } + + double _freq, _resolution; +}; + +class dummy_subdev_basic : public wax::obj{ +private: + void get(const wax::obj &key, wax::obj &val){ + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + val = double(0.0); //always zero + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } + } + + void set(const wax::obj &key, const wax::obj &){ + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_FREQ: + // do nothing + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } + } +}; + +class dummy_subdev_bw : public wax::obj{ +private: + void get(const wax::obj &key, wax::obj &val){ + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + val = _freq; + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = true; + return; + + case SUBDEV_PROP_BANDWIDTH: + val = _bandwidth; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } + } + + void set(const wax::obj &key, const wax::obj &val){ + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_FREQ: + _freq = val.as<double>(); + return; + + case SUBDEV_PROP_BANDWIDTH: + _bandwidth = val.as<double>(); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } + } + + double _freq, _bandwidth; +}; + +class dummy_dsp : public wax::obj{ +public: + dummy_dsp(double codec_rate): + _codec_rate(codec_rate) + { + /* NOP */ + } +private: + void get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + switch(key.as<dsp_prop_t>()){ + case DSP_PROP_CODEC_RATE: + val = _codec_rate; + return; + + case DSP_PROP_HOST_RATE: + val = _host_rate; + return; + + case DSP_PROP_FREQ_SHIFT: + val = _freq_shift; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } + } + + void set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + switch(key.as<dsp_prop_t>()){ + case DSP_PROP_FREQ_SHIFT: + _freq_shift = val.as<double>(); + dsp_type1::calc_cordic_word_and_update(_freq_shift, _codec_rate); + return; + + case DSP_PROP_HOST_RATE: + _host_rate = val.as<double>(); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } + } + + double _codec_rate, _freq_shift, _host_rate; +}; + +/*********************************************************************** + * Test cases + **********************************************************************/ +static const double tolerance = 0.001; + +BOOST_AUTO_TEST_CASE(test_tune_helper_rx){ + dummy_subdev subdev(1e6); + dummy_dsp dsp(100e6); + + std::cout << "Testing tune helper RX automatic IF offset" << std::endl; + tune_result_t tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 2.3451e9); + std::cout << tr.to_pp_string() << std::endl; + BOOST_CHECK_CLOSE(tr.actual_inter_freq, 2.345e9, tolerance); + BOOST_CHECK_CLOSE(tr.actual_dsp_freq, -100e3, tolerance); + + double freq_derived = derive_freq_from_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link()); + BOOST_CHECK_CLOSE(freq_derived, 2.3451e9, tolerance); +} + +BOOST_AUTO_TEST_CASE(test_tune_helper_tx){ + dummy_subdev subdev(1e6); + dummy_dsp dsp(100e6); + + std::cout << "Testing tune helper TX automatic IF offset" << std::endl; + tune_result_t tr = tune_tx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 2.3451e9); + std::cout << tr.to_pp_string() << std::endl; + BOOST_CHECK_CLOSE(tr.actual_inter_freq, 2.345e9, tolerance); + BOOST_CHECK_CLOSE(tr.actual_dsp_freq, 100e3, tolerance); + + double freq_derived = derive_freq_from_tx_subdev_and_dsp(subdev.get_link(), dsp.get_link()); + BOOST_CHECK_CLOSE(freq_derived, 2.3451e9, tolerance); +} + +BOOST_AUTO_TEST_CASE(test_tune_helper_rx_nyquist){ + dummy_subdev_basic subdev; + dummy_dsp dsp(100e6); + + std::cout << "Testing tune helper RX dummy basic board" << std::endl; + tune_result_t tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 55e6); + std::cout << tr.to_pp_string() << std::endl; + BOOST_CHECK_CLOSE(tr.actual_inter_freq, 0.0, tolerance); + BOOST_CHECK_CLOSE(tr.actual_dsp_freq, 45e6, tolerance); + + double freq_derived = derive_freq_from_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link()); + BOOST_CHECK_CLOSE(freq_derived, -45e6, tolerance); +} + +BOOST_AUTO_TEST_CASE(test_tune_helper_rx_lo_off){ + dummy_subdev_bw subdev; + dummy_dsp dsp(100e6); + tune_result_t tr; + + std::cout << "Testing tune helper RX automatic LO offset B >> fs" << std::endl; + subdev[SUBDEV_PROP_BANDWIDTH] = double(40e6); + dsp[DSP_PROP_HOST_RATE] = double(4e6); + tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 2.45e9); + std::cout << tr.to_pp_string() << std::endl; + BOOST_CHECK_CLOSE(tr.actual_inter_freq, 2.45e9+4e6/2, tolerance); + + std::cout << "Testing tune helper RX automatic LO offset B > fs" << std::endl; + subdev[SUBDEV_PROP_BANDWIDTH] = double(40e6); + dsp[DSP_PROP_HOST_RATE] = double(25e6); + tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 2.45e9); + std::cout << tr.to_pp_string() << std::endl; + BOOST_CHECK_CLOSE(tr.actual_inter_freq, 2.45e9+(40e6-25e6)/2, tolerance); + + std::cout << "Testing tune helper RX automatic LO offset B < fs" << std::endl; + subdev[SUBDEV_PROP_BANDWIDTH] = double(20e6); + dsp[DSP_PROP_HOST_RATE] = double(25e6); + tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 2.45e9); + std::cout << tr.to_pp_string() << std::endl; + BOOST_CHECK_CLOSE(tr.actual_inter_freq, 2.45e9, tolerance); +} diff --git a/host/tests/vrt_test.cpp b/host/tests/vrt_test.cpp new file mode 100644 index 000000000..9e131a10b --- /dev/null +++ b/host/tests/vrt_test.cpp @@ -0,0 +1,141 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/test/unit_test.hpp> +#include <uhd/transport/vrt_if_packet.hpp> +#include <cstdlib> + +using namespace uhd::transport; + +static void pack_and_unpack( + vrt::if_packet_info_t &if_packet_info_in +){ + boost::uint32_t header_buff[vrt::max_if_hdr_words32]; + + //pack metadata into a vrt header + vrt::if_hdr_pack_be( + header_buff, if_packet_info_in + ); + + vrt::if_packet_info_t if_packet_info_out; + if_packet_info_out.num_packet_words32 = if_packet_info_in.num_packet_words32; + + //unpack the vrt header back into metadata + vrt::if_hdr_unpack_be( + header_buff, if_packet_info_out + ); + + //check the the unpacked metadata is the same + BOOST_CHECK_EQUAL(if_packet_info_in.packet_count, if_packet_info_out.packet_count); + BOOST_CHECK_EQUAL(if_packet_info_in.num_header_words32, if_packet_info_out.num_header_words32); + BOOST_CHECK_EQUAL(if_packet_info_in.num_payload_words32, if_packet_info_out.num_payload_words32); + BOOST_CHECK_EQUAL(if_packet_info_in.has_sid, if_packet_info_out.has_sid); + if (if_packet_info_in.has_sid and if_packet_info_out.has_sid){ + BOOST_CHECK_EQUAL(if_packet_info_in.sid, if_packet_info_out.sid); + } + BOOST_CHECK_EQUAL(if_packet_info_in.has_cid, if_packet_info_out.has_cid); + if (if_packet_info_in.has_cid and if_packet_info_out.has_cid){ + BOOST_CHECK_EQUAL(if_packet_info_in.cid, if_packet_info_out.cid); + } + BOOST_CHECK_EQUAL(if_packet_info_in.has_tsi, if_packet_info_out.has_tsi); + if (if_packet_info_in.has_tsi and if_packet_info_out.has_tsi){ + BOOST_CHECK_EQUAL(if_packet_info_in.tsi, if_packet_info_out.tsi); + } + BOOST_CHECK_EQUAL(if_packet_info_in.has_tsf, if_packet_info_out.has_tsf); + if (if_packet_info_in.has_tsf and if_packet_info_out.has_tsf){ + BOOST_CHECK_EQUAL(if_packet_info_in.tsf, if_packet_info_out.tsf); + } + BOOST_CHECK_EQUAL(if_packet_info_in.has_tlr, if_packet_info_out.has_tlr); + if (if_packet_info_in.has_tlr and if_packet_info_out.has_tlr){ + BOOST_CHECK_EQUAL(if_packet_info_in.tlr, if_packet_info_out.tlr); + } +} + +/*********************************************************************** + * Loopback test the vrt packer/unpacker with various packet info combos + * The trailer is not tested as it is not convenient to do so. + **********************************************************************/ + +BOOST_AUTO_TEST_CASE(test_with_none){ + vrt::if_packet_info_t if_packet_info; + if_packet_info.packet_count = 0; + if_packet_info.has_sid = false; + if_packet_info.has_cid = false; + if_packet_info.has_tsi = false; + if_packet_info.has_tsf = false; + if_packet_info.has_tlr = false; + if_packet_info.num_payload_words32 = 0; + pack_and_unpack(if_packet_info); +} + +BOOST_AUTO_TEST_CASE(test_with_sid){ + vrt::if_packet_info_t if_packet_info; + if_packet_info.packet_count = 1; + if_packet_info.has_sid = true; + if_packet_info.has_cid = false; + if_packet_info.has_tsi = false; + if_packet_info.has_tsf = false; + if_packet_info.has_tlr = false; + if_packet_info.sid = std::rand(); + if_packet_info.num_payload_words32 = 1111; + pack_and_unpack(if_packet_info); +} + +static const bool cid_enb = false; + +BOOST_AUTO_TEST_CASE(test_with_cid){ + vrt::if_packet_info_t if_packet_info; + if_packet_info.packet_count = 2; + if_packet_info.has_sid = false; + if_packet_info.has_cid = cid_enb; + if_packet_info.has_tsi = false; + if_packet_info.has_tsf = false; + if_packet_info.has_tlr = false; + if_packet_info.cid = std::rand(); + if_packet_info.num_payload_words32 = 2222; + pack_and_unpack(if_packet_info); +} + +BOOST_AUTO_TEST_CASE(test_with_time){ + vrt::if_packet_info_t if_packet_info; + if_packet_info.packet_count = 3; + if_packet_info.has_sid = false; + if_packet_info.has_cid = false; + if_packet_info.has_tsi = true; + if_packet_info.has_tsf = true; + if_packet_info.has_tlr = false; + if_packet_info.tsi = std::rand(); + if_packet_info.tsf = std::rand(); + if_packet_info.num_payload_words32 = 33333; + pack_and_unpack(if_packet_info); +} + +BOOST_AUTO_TEST_CASE(test_with_all){ + vrt::if_packet_info_t if_packet_info; + if_packet_info.packet_count = 4; + if_packet_info.has_sid = true; + if_packet_info.has_cid = cid_enb; + if_packet_info.has_tsi = true; + if_packet_info.has_tsf = true; + if_packet_info.has_tlr = false; + if_packet_info.sid = std::rand(); + if_packet_info.cid = std::rand(); + if_packet_info.tsi = std::rand(); + if_packet_info.tsf = std::rand(); + if_packet_info.num_payload_words32 = 44444; + pack_and_unpack(if_packet_info); +} diff --git a/host/tests/warning_test.cpp b/host/tests/warning_test.cpp new file mode 100644 index 000000000..db19955de --- /dev/null +++ b/host/tests/warning_test.cpp @@ -0,0 +1,29 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/test/unit_test.hpp> +#include <uhd/utils/warning.hpp> +#include <iostream> + +BOOST_AUTO_TEST_CASE(test_warning_post){ + std::cerr << "---begin print test ---" << std::endl; + uhd::warning::post( + "This is a test print for a warning message.\n" + "And this is the second line of the test print.\n" + ); + std::cerr << "---end print test ---" << std::endl; +} diff --git a/host/tests/wax_test.cpp b/host/tests/wax_test.cpp new file mode 100644 index 000000000..18730e0c2 --- /dev/null +++ b/host/tests/wax_test.cpp @@ -0,0 +1,104 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/test/unit_test.hpp> +#include <boost/shared_ptr.hpp> +#include <uhd/wax.hpp> +#include <iostream> + +enum opt_a_t{OPTION_A_0, OPTION_A_1}; +enum opt_b_t{OPTION_B_0, OPTION_B_1}; + +BOOST_AUTO_TEST_CASE(test_enums){ + wax::obj opta = OPTION_A_0; + BOOST_CHECK_THROW(opta.as<opt_b_t>(), std::exception); + BOOST_CHECK_EQUAL(opta.as<opt_a_t>(), OPTION_A_0); +} + +/*********************************************************************** + * demo class for wax framework + **********************************************************************/ +class wax_demo : public wax::obj{ +public: + typedef boost::shared_ptr<wax_demo> sptr; + + wax_demo(size_t sub_demos, size_t len){ + d_nums = std::vector<float>(len); + if (sub_demos != 0){ + for (size_t i = 0; i < len; i++){ + d_subs.push_back(sptr(new wax_demo(sub_demos-1, len))); + } + } + } + ~wax_demo(void){ + /* NOP */ + } +private: + std::vector<float> d_nums; + std::vector<sptr> d_subs; + + void get(const wax::obj &key, wax::obj &value){ + if (d_subs.size() == 0){ + value = d_nums[key.as<size_t>()]; + }else{ + value = d_subs[key.as<size_t>()]->get_link(); + } + } + void set(const wax::obj &key, const wax::obj &value){ + if (d_subs.size() == 0){ + d_nums[key.as<size_t>()] = value.as<float>(); + }else{ + throw std::runtime_error("cant set to a wax demo with sub demos"); + } + } +}; + +BOOST_AUTO_TEST_CASE(test_chaining){ + wax_demo wd(2, 1); + std::cout << "chain 1" << std::endl; + wd[size_t(0)]; + std::cout << "chain 2" << std::endl; + wd[size_t(0)][size_t(0)]; + std::cout << "chain 3" << std::endl; + wd[size_t(0)][size_t(0)][size_t(0)]; +} + +BOOST_AUTO_TEST_CASE(test_set_get){ + wax_demo wd(2, 10); + std::cout << "set and get all" << std::endl; + for (size_t i = 0; i < 10; i++){ + for (size_t j = 0; j < 10; j++){ + for (size_t k = 0; k < 10; k++){ + float val = float(i * j * k + i + j + k); + //std::cout << i << " " << j << " " << k << std::endl; + wd[i][j][k] = val; + BOOST_CHECK_EQUAL(val, wd[i][j][k].as<float>()); + } + } + } +} + +BOOST_AUTO_TEST_CASE(test_proxy){ + wax_demo wd(2, 1); + std::cout << "store proxy" << std::endl; + wax::obj p = wd[size_t(0)][size_t(0)]; + p[size_t(0)] = float(5); + + std::cout << "assign proxy" << std::endl; + wax::obj a = p[size_t(0)]; + BOOST_CHECK_EQUAL(a.as<float>(), float(5)); +} diff --git a/host/uhd.pc.in b/host/uhd.pc.in new file mode 100644 index 000000000..536f254ed --- /dev/null +++ b/host/uhd.pc.in @@ -0,0 +1,11 @@ +prefix=@CMAKE_INSTALL_PREFIX@ +exec_prefix=${prefix} +libdir=${exec_prefix}/@LIBRARY_DIR@ +includedir=${prefix}/@INCLUDE_DIR@ + +Name: @CPACK_PACKAGE_NAME@ +Description: @CPACK_PACKAGE_DESCRIPTION_SUMMARY@ +Requires: +Version: @CPACK_PACKAGE_VERSION@ +Libs: -L${libdir} -luhd +Cflags: -I${includedir} diff --git a/host/usrp_e_utils/CMakeLists.txt b/host/usrp_e_utils/CMakeLists.txt new file mode 100644 index 000000000..1ecd2ac46 --- /dev/null +++ b/host/usrp_e_utils/CMakeLists.txt @@ -0,0 +1,52 @@ +# +# Copyright 2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# USRP embedded utilities that get installed into the share path +######################################################################## +IF(CMAKE_SYSTEM_NAME STREQUAL "Linux") + SET(LINUX_TARGET TRUE) +ENDIF(CMAKE_SYSTEM_NAME STREQUAL "Linux") + +LIBUHD_REGISTER_COMPONENT("USRP-E Utils" ENABLE_USRP_E_UTILS OFF "LINUX_TARGET" OFF) + +IF(ENABLE_USRP_E_UTILS) + ENABLE_LANGUAGE(C) + INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}) + INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e100) + INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e100/include) + INCLUDE_DIRECTORIES(${CMAKE_BINARY_DIR}/lib/ic_reg_maps) + + SET(usrp_e_utils_sources + usrp-e-utility.cpp + usrp-e-loopback.c + usrp-e-timed.c + usrp-e-wb-test.cpp + usrp-e-debug-pins.c + usrp-e-i2c.c + usrp-e-spi.c + ) + + #for each source: build an executable and install + FOREACH(util_source ${usrp_e_utils_sources}) + GET_FILENAME_COMPONENT(util_name ${util_source} NAME_WE) + ADD_EXECUTABLE(${util_name} ${util_source}) + TARGET_LINK_LIBRARIES(${util_name} ${Boost_LIBRARIES}) + INSTALL(TARGETS ${util_name} RUNTIME DESTINATION ${PKG_DATA_DIR}/usrp_e_utils) + ENDFOREACH(util_source) + +ENDIF(ENABLE_USRP_E_UTILS) diff --git a/host/usrp_e_utils/clkgen_config.hpp b/host/usrp_e_utils/clkgen_config.hpp new file mode 100644 index 000000000..f39f8bb19 --- /dev/null +++ b/host/usrp_e_utils/clkgen_config.hpp @@ -0,0 +1,305 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef USRP_E_UTILS_CLKGEN_CONFIG_HPP +#define USRP_E_UTILS_CLKGEN_CONFIG_HPP + +#include <iostream> +#include <sstream> +#include <fstream> +#include <string> +#include <cstdlib> + +#include <fcntl.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/ioctl.h> + +#include <linux/spi/spidev.h> + +namespace usrp_e_clkgen_config_utility{ + +// Programming data for clock gen chip +static const unsigned int config_data[] = { + 0x000024, + 0x023201, + 0x000081, + 0x000400, + 0x00104c, + 0x001101, + 0x001200, + 0x001300, + 0x001414, + 0x001500, + 0x001604, + 0x001704, + 0x001807, + 0x001900, + //0x001a00,//for debug + 0x001a32, + 0x001b12, + 0x001c44, + 0x001d00, + 0x001e00, + 0x00f062, + 0x00f162, + 0x00f262, + 0x00f362, + 0x00f462, + 0x00f562, + 0x00f662, + 0x00f762, + 0x00f862, + 0x00f962, + 0x00fa62, + 0x00fb62, + 0x00fc00, + 0x00fd00, + 0x019021, + 0x019100, + 0x019200, + 0x019321, + 0x019400, + 0x019500, + 0x019611, + 0x019700, + 0x019800, + 0x019900, + 0x019a00, + 0x019b00, + 0x01e003, + 0x01e102, + 0x023000, + 0x023201, + 0x0b0201, + 0x0b0300, + 0x001fff, + 0x0a0000, + 0x0a0100, + 0x0a0200, + 0x0a0302, + 0x0a0400, + 0x0a0504, + 0x0a060e, + 0x0a0700, + 0x0a0810, + 0x0a090e, + 0x0a0a00, + 0x0a0bf0, + 0x0a0c0b, + 0x0a0d01, + 0x0a0e90, + 0x0a0f01, + 0x0a1001, + 0x0a11e0, + 0x0a1201, + 0x0a1302, + 0x0a1430, + 0x0a1580, + 0x0a16ff, + 0x023201, + 0x0b0301, + 0x023201, +}; + + +const unsigned int CLKGEN_SELECT = 145; + + +enum gpio_direction {IN, OUT}; + +class gpio { + public: + + gpio(unsigned int gpio_num, gpio_direction pin_direction, bool close_action); + ~gpio(); + + bool get_value(); + void set_value(bool state); + + private: + + unsigned int gpio_num; + + std::stringstream base_path; + std::fstream value_file; + std::fstream direction_file; + bool close_action; // True set to input and release, false do nothing +}; + +class spidev { + public: + + spidev(std::string dev_name); + ~spidev(); + + void send(char *wbuf, char *rbuf, unsigned int nbytes); + + private: + + int fd; + +}; + +gpio::gpio(unsigned int _gpio_num, gpio_direction pin_direction, bool close_action) +:close_action(close_action) +{ + std::fstream export_file; + + gpio_num = _gpio_num; + + export_file.open("/sys/class/gpio/export", std::ios::out); + if (!export_file.is_open()) ///\todo Poor error handling + std::cout << "Failed to open gpio export file." << std::endl; + + export_file << gpio_num << std::endl; + + base_path << "/sys/class/gpio/gpio" << gpio_num << std::flush; + + std::string direction_file_name; + + direction_file_name = base_path.str() + "/direction"; + + direction_file.open(direction_file_name.c_str()); + if (!direction_file.is_open()) + std::cout << "Failed to open direction file." << std::endl; + if (pin_direction == OUT) + direction_file << "out" << std::endl; + else + direction_file << "in" << std::endl; + + std::string value_file_name; + + value_file_name = base_path.str() + "/value"; + + value_file.open(value_file_name.c_str(), std::ios_base::in | std::ios_base::out); + if (!value_file.is_open()) + std::cout << "Failed to open value file." << std::endl; +} + +bool gpio::get_value() +{ + + std::string val; + + std::getline(value_file, val); + value_file.seekg(0); + + if (val == "0") + return false; + else if (val == "1") + return true; + else + std::cout << "Data read from value file|" << val << "|" << std::endl; + + return false; +} + +void gpio::set_value(bool state) +{ + + if (state) + value_file << "1" << std::endl; + else + value_file << "0" << std::endl; +} + +gpio::~gpio() +{ + if (close_action) { + std::fstream unexport_file; + + direction_file << "in" << std::endl; + + unexport_file.open("/sys/class/gpio/unexport", std::ios::out); + if (!unexport_file.is_open()) ///\todo Poor error handling + std::cout << "Failed to open gpio export file." << std::endl; + + unexport_file << gpio_num << std::endl; + + } + +} + +spidev::spidev(std::string fname) +{ + int ret; + int mode = 0; + int speed = 12000; + int bits = 24; + + fd = open(fname.c_str(), O_RDWR); + + ret = ioctl(fd, SPI_IOC_WR_MODE, &mode); + ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed); + ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits); +} + + +spidev::~spidev() +{ + close(fd); +} + +void spidev::send(char *buf, char *rbuf, unsigned int nbytes) +{ + int ret; + + struct spi_ioc_transfer tr; + tr.tx_buf = (unsigned long) buf; + tr.rx_buf = (unsigned long) rbuf; + tr.len = nbytes; + tr.delay_usecs = 0; + tr.speed_hz = 12000; + tr.bits_per_word = 24; + + ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); + +} + +static void send_config_to_clkgen(gpio &chip_select, const unsigned int data[], unsigned int data_size) +{ + spidev spi("/dev/spidev1.0"); + unsigned int rbuf; + + for (unsigned int i = 0; i < data_size; i++) { + + //std::cout << "sending " << std::hex << data[i] << std::endl; + chip_select.set_value(0); + spi.send((char *)&data[i], (char *)&rbuf, 4); + chip_select.set_value(1); + unsigned int addr = (data[i] >> 8) & 0xfff; + if (addr == 0x232 || addr == 0x000){ + std::cout << "." << std::flush; + sleep(1); + } + }; + std::cout << std::endl; +} + +}//namespace usrp_e_clkgen_config_utility + +//int main(int argc, char *argv[]) +static void clock_genconfig_main(void) +{ + using namespace usrp_e_clkgen_config_utility; + gpio clkgen_select(CLKGEN_SELECT, OUT, true); + + send_config_to_clkgen(clkgen_select, config_data, sizeof(config_data)/sizeof(config_data[0])); +} + +#endif /*USRP_E_UTILS_CLKGEN_CONFIG_HPP*/ diff --git a/host/usrp_e_utils/usrp-e-debug-pins.c b/host/usrp_e_utils/usrp-e-debug-pins.c new file mode 100644 index 000000000..94f898b67 --- /dev/null +++ b/host/usrp_e_utils/usrp-e-debug-pins.c @@ -0,0 +1,78 @@ +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/types.h> +#include <fcntl.h> +#include <string.h> +#include <sys/ioctl.h> + +#include <linux/usrp_e.h> +#include "usrp_e100_regs.hpp" + +// Usage: usrp_e_gpio <string> + +static int fp; + +static int read_reg(__u16 reg) +{ + int ret; + struct usrp_e_ctl16 d; + + d.offset = reg; + d.count = 1; + ret = ioctl(fp, USRP_E_READ_CTL16, &d); + return d.buf[0]; +} + +static void write_reg(__u16 reg, __u16 val) +{ + int ret; + struct usrp_e_ctl16 d; + + d.offset = reg; + d.count = 1; + d.buf[0] = val; + ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); +} + +int main(int argc, char *argv[]) +{ + int test; + + test = 0; + if (argc < 2) { + printf("%s 0|1|off\n", argv[0]); + return -1; + } + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + if (fp < 0) { + perror("Open failed"); + return -1; + } + + if (strcmp(argv[1], "0") == 0) { + printf("Selected 0 based on %s\n", argv[1]); + write_reg(UE_REG_GPIO_TX_DDR, 0xFFFF); + write_reg(UE_REG_GPIO_RX_DDR, 0xFFFF); + write_reg(UE_REG_GPIO_TX_SEL, 0x0); + write_reg(UE_REG_GPIO_RX_SEL, 0x0); + write_reg(UE_REG_GPIO_TX_DBG, 0xFFFF); + write_reg(UE_REG_GPIO_RX_DBG, 0xFFFF); + } else if (strcmp(argv[1], "1") == 0) { + printf("Selected 1 based on %s\n", argv[1]); + write_reg(UE_REG_GPIO_TX_DDR, 0xFFFF); + write_reg(UE_REG_GPIO_RX_DDR, 0xFFFF); + write_reg(UE_REG_GPIO_TX_SEL, 0xFFFF); + write_reg(UE_REG_GPIO_RX_SEL, 0xFFFF); + write_reg(UE_REG_GPIO_TX_DBG, 0xFFFF); + write_reg(UE_REG_GPIO_RX_DBG, 0xFFFF); + } else { + printf("Selected off based on %s\n", argv[1]); + write_reg(UE_REG_GPIO_TX_DDR, 0x0); + write_reg(UE_REG_GPIO_RX_DDR, 0x0); + } + + return 0; +} diff --git a/host/usrp_e_utils/usrp-e-i2c.c b/host/usrp_e_utils/usrp-e-i2c.c new file mode 100644 index 000000000..c6fd4c632 --- /dev/null +++ b/host/usrp_e_utils/usrp-e-i2c.c @@ -0,0 +1,87 @@ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <sys/types.h> +#include <fcntl.h> +#include <sys/ioctl.h> + +#include <linux/usrp_e.h> + +// Usage: usrp_e_i2c w address data0 data1 data 2 .... +// Usage: usrp_e_i2c r address count + +int main(int argc, char *argv[]) +{ + int fp, ret, i, tmp; + struct usrp_e_i2c *i2c_msg; + int direction, address, count; + + if (argc < 3) { + printf("Usage: usrp-e-i2c w address data0 data1 data2 ...\n"); + printf("Usage: usrp-e-i2c r address count\n"); + printf("All addresses and data in hex.\n"); + exit(-1); + } + + if (strcmp(argv[1], "r") == 0) { + direction = 0; + } else if (strcmp(argv[1], "w") == 0) { + direction = 1; + } else { + return -1; + } + + sscanf(argv[2], "%X", &address); + printf("Address = %X\n", address); + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + if (fp < 0) { + perror("Open failed"); + return -1; + } + +// sleep(1); + + if (direction) { + count = argc - 3; + } else { + sscanf(argv[3], "%X", &count); + } + printf("Count = %X\n", count); + + i2c_msg = malloc(sizeof(i2c_msg) + count * sizeof(char)); + + i2c_msg->addr = address; + i2c_msg->len = count; + + for (i = 0; i < count; i++) { + i2c_msg->data[i] = i; + } + + if (direction) { + // Write + + for (i=0; i<count; i++) { + sscanf(argv[3+i], "%X", &tmp); + i2c_msg->data[i] = tmp; + } + + ret = ioctl(fp, USRP_E_I2C_WRITE, i2c_msg); + printf("Return value from i2c_write ioctl: %d\n", ret); + } else { + // Read + + ret = ioctl(fp, USRP_E_I2C_READ, i2c_msg); + printf("Return value from i2c_read ioctl: %d\n", ret); + + printf("Ioctl: %d Data read :", ret); + for (i=0; i<count; i++) { + printf(" %X", i2c_msg->data[i]); + } + printf("\n"); + + } + return 0; +} diff --git a/host/usrp_e_utils/usrp-e-loopback.c b/host/usrp_e_utils/usrp-e-loopback.c new file mode 100644 index 000000000..78e2b5d16 --- /dev/null +++ b/host/usrp_e_utils/usrp-e-loopback.c @@ -0,0 +1,278 @@ +#include <stdio.h> +#include <string.h> +#include <sys/types.h> +#include <sys/ioctl.h> +#include <fcntl.h> +#include <pthread.h> +#include <stdlib.h> +#include <unistd.h> +#include <stddef.h> +#include <sys/mman.h> +#include <sys/time.h> +#include <poll.h> +#include "linux/usrp_e.h" + +// max length #define PKT_DATA_LENGTH 1016 +static int packet_data_length; +static int error; + +struct pkt { + int len; + int checksum; + int seq_num; + short data[1024-6]; +}; + +struct ring_buffer_info (*rxi)[]; +struct ring_buffer_info (*txi)[]; +struct pkt (*rx_buf)[200]; +struct pkt (*tx_buf)[200]; + +static int fp; +static struct usrp_e_ring_buffer_size_t rb_size; + +static int calc_checksum(struct pkt *p) +{ + int i, sum; + + i = 0; + sum = 0; + + for (i=0; i < p->len; i++) + sum += p->data[i]; + + sum += p->seq_num; + sum += p->len; + + return sum; +} + +static void *read_thread(void *threadid) +{ + int cnt, prev_seq_num, pkt_count, seq_num_failure; + struct pkt *p; + unsigned long bytes_transfered, elapsed_seconds; + struct timeval start_time, finish_time; + int rb_read; + + printf("Greetings from the reading thread!\n"); + printf("sizeof pkt = %d\n", sizeof(struct pkt)); + + rb_read = 0; + + bytes_transfered = 0; + gettimeofday(&start_time, NULL); + + prev_seq_num = 0; + pkt_count = 0; + seq_num_failure = 0; + + while (1) { + + if (!((*rxi)[rb_read].flags & RB_USER)) { +// printf("Waiting for data\n"); + struct pollfd pfd; + pfd.fd = fp; + pfd.events = POLLIN; + poll(&pfd, 1, -1); + } + + (*rxi)[rb_read].flags = RB_USER_PROCESS; + +// printf("pkt received, rb_read = %d\n", rb_read); + + cnt = (*rxi)[rb_read].len; + p = &(*rx_buf)[rb_read]; + +// cnt = read(fp, rx_data, 2048); +// if (cnt < 0) +// printf("Error returned from read: %d, sequence number = %d\n", cnt, p->seq_num); + +// printf("p = %X, p->seq_num = %d p->len = %d\n", p, p->seq_num, p->len); + + + pkt_count++; + + if (p->seq_num != prev_seq_num + 1) { + printf("Sequence number fail, current = %d, previous = %d, pkt_count = %d\n", + p->seq_num, prev_seq_num, pkt_count); + printf("pkt received, rb_read = %d\n", rb_read); + printf("p = %p, p->seq_num = %d p->len = %d\n", p, p->seq_num, p->len); + + seq_num_failure ++; + if (seq_num_failure > 2) + error = 1; + } + + prev_seq_num = p->seq_num; + + if (calc_checksum(p) != p->checksum) { + printf("Checksum fail packet = %X, expected = %X, pkt_count = %d\n", + calc_checksum(p), p->checksum, pkt_count); + error = 1; + } + + (*rxi)[rb_read].flags = RB_KERNEL; + + rb_read++; + if (rb_read == rb_size.num_rx_frames) + rb_read = 0; + + bytes_transfered += cnt; + + if (bytes_transfered > (100 * 1000000)) { + gettimeofday(&finish_time, NULL); + elapsed_seconds = finish_time.tv_sec - start_time.tv_sec; + + printf("RX data transfer rate = %f K Samples/second\n", + (float) bytes_transfered / (float) elapsed_seconds / 4000); + + + start_time = finish_time; + bytes_transfered = 0; + } + + +// printf("."); +// fflush(stdout); +// printf("\n"); + } + return NULL; +} + +static void *write_thread(void *threadid) +{ + int seq_number, i, cnt, rb_write; + void *tx_data; + struct pkt *p; + + printf("Greetings from the write thread!\n"); + + tx_data = malloc(2048); + p = (struct pkt *) ((void *)tx_data); + + for (i=0; i < packet_data_length; i++) +// p->data[i] = random() >> 16; + p->data[i] = i; + + seq_number = 1; + rb_write = 0; + + while (1) { + p->seq_num = seq_number++; + + if (packet_data_length > 0) + p->len = packet_data_length; + else + p->len = (random() & 0x1ff) + (1004 - 512); + + p->checksum = calc_checksum(p); + + if (!((*txi)[rb_write].flags & RB_KERNEL)) { +// printf("Waiting for space\n"); + struct pollfd pfd; + pfd.fd = fp; + pfd.events = POLLOUT; + poll(&pfd, 1, -1); + } + + memcpy(&(*tx_buf)[rb_write], tx_data, p->len * 2 + 12); + + (*txi)[rb_write].len = p->len * 2 + 12; + (*txi)[rb_write].flags = RB_USER; + + rb_write++; + if (rb_write == rb_size.num_tx_frames) + rb_write = 0; + + cnt = write(fp, NULL, 0); +// if (cnt < 0) +// printf("Error returned from write: %d\n", cnt); +// sleep(1); + } + return NULL; +} + + +int main(int argc, char *argv[]) +{ + pthread_t tx, rx; + long int t = 0; + struct sched_param s = { + .sched_priority = 1 + }; + int ret, map_size, page_size; + void *rb; + struct usrp_e_ctl16 d; + + if (argc < 2) { + printf("%s data_size\n", argv[0]); + return -1; + } + + packet_data_length = atoi(argv[1]); + + if (packet_data_length > 1016) { + packet_data_length = 1016; + printf("Max data length = 1016, clamping.\n"); + } + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + d.offset = 14; + d.count = 1; + d.buf[0] = (1<<8) | (1<<9); + ioctl(fp, USRP_E_WRITE_CTL16, &d); + + page_size = getpagesize(); + + ret = ioctl(fp, USRP_E_GET_RB_INFO, &rb_size); + + map_size = (rb_size.num_pages_rx_flags + rb_size.num_pages_tx_flags) * page_size + + (rb_size.num_rx_frames + rb_size.num_tx_frames) * (page_size >> 1); + + rb = mmap(0, map_size, PROT_READ|PROT_WRITE, MAP_SHARED, fp, 0); + if (rb == MAP_FAILED) { + perror("mmap failed"); + return -1; + } + + printf("rb = %p\n", rb); + + rxi = rb; + rx_buf = rb + (rb_size.num_pages_rx_flags * page_size); + txi = rb + (rb_size.num_pages_rx_flags * page_size) + + (rb_size.num_rx_frames * page_size >> 1); + tx_buf = rb + (rb_size.num_pages_rx_flags * page_size) + + (rb_size.num_rx_frames * page_size >> 1) + + (rb_size.num_pages_tx_flags * page_size); + + printf("rxi = %p, rx_buf = %p, txi = %p, tx_buf = %p\n", rxi, rx_buf, txi, tx_buf); + + if ((ret = sched_setscheduler(0, SCHED_RR, &s))) + perror("sched_setscheduler"); + + error = 0; + +#if 1 + if (pthread_create(&rx, NULL, read_thread, (void *) t)) { + printf("Failed to create rx thread\n"); + exit(-1); + } + + sleep(1); +#endif + + if (pthread_create(&tx, NULL, write_thread, (void *) t)) { + printf("Failed to create tx thread\n"); + exit(-1); + } + +// while (!error) + sleep(1000000000); + + printf("Done sleeping\n"); + + return 0; +} diff --git a/host/usrp_e_utils/usrp-e-spi.c b/host/usrp_e_utils/usrp-e-spi.c new file mode 100644 index 000000000..5203f56a8 --- /dev/null +++ b/host/usrp_e_utils/usrp-e-spi.c @@ -0,0 +1,54 @@ +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/types.h> +#include <fcntl.h> +#include <sys/ioctl.h> + +#include <linux/usrp_e.h> + +// Usage: usrp_e_spi w|rb slave data + +int main(int argc, char *argv[]) +{ + int fp, slave, length, ret; + unsigned int data; + struct usrp_e_spi spi_dat; + + if (argc < 5) { + printf("Usage: usrp_e_spi w|rb slave transfer_length data\n"); + exit(-1); + } + + slave = atoi(argv[2]); + length = atoi(argv[3]); + data = atoll(argv[4]); + + printf("Data = %X\n", data); + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + if (fp < 0) { + perror("Open failed"); + return -1; + } + +// sleep(1); + + + spi_dat.slave = slave; + spi_dat.data = data; + spi_dat.length = length; + spi_dat.flags = UE_SPI_PUSH_FALL | UE_SPI_LATCH_RISE; + + if (*argv[1] == 'r') { + spi_dat.readback = 1; + ret = ioctl(fp, USRP_E_SPI, &spi_dat); + printf("Ioctl returns: %d, Data returned = %d\n", ret, spi_dat.data); + } else { + spi_dat.readback = 0; + ioctl(fp, USRP_E_SPI, &spi_dat); + } + + return 0; +} diff --git a/host/usrp_e_utils/usrp-e-timed.c b/host/usrp_e_utils/usrp-e-timed.c new file mode 100644 index 000000000..06dfdf512 --- /dev/null +++ b/host/usrp_e_utils/usrp-e-timed.c @@ -0,0 +1,382 @@ +#include <stdio.h> +#include <sys/types.h> +#include <sys/time.h> +#include <sys/ioctl.h> +#include <string.h> +#include <fcntl.h> +#include <pthread.h> +#include <stdlib.h> +#include <unistd.h> +#include <stddef.h> +#include <poll.h> +#include <sys/mman.h> +#include "linux/usrp_e.h" + +// max length #define PKT_DATA_LENGTH 1016 +static int packet_data_length; + +struct ring_buffer_info (*rxi)[]; +struct ring_buffer_info (*txi)[]; +__u8 *rx_buf; +__u8 *tx_buf; +static struct usrp_e_ring_buffer_size_t rb_size; + +static int fp; +static u_int32_t crc_tab[256]; + +// CRC code from http://www.koders.com/c/fid699AFE0A656F0022C9D6B9D1743E697B69CE5815.aspx +// GPLv2 + +static u_int32_t chksum_crc32_gentab(void) +{ + unsigned long crc, poly; + unsigned long i, j; + + poly = 0x04C11DB7L; + + for (i = 0; i < 256; i++) { + crc = i; + for (j = 8; j > 0; j--) { + if (crc & 1) { + crc = (crc >> 1) ^ poly; + } else { + crc >>= 1; + } + } + crc_tab[i] = crc; +// printf("crc_tab[%d] = %X\n", i , crc); + } + + return 0; +} + +struct timeval delta_time(struct timeval f, struct timeval s) +{ + struct timeval d; + + if (f.tv_usec > s.tv_usec) { + d.tv_usec = f.tv_usec - s.tv_usec; + d.tv_sec = f.tv_sec - s.tv_sec; + } else { + d.tv_usec = f.tv_usec - s.tv_usec + 1e6; + d.tv_sec = f.tv_sec - s.tv_sec - 1; + } + + return d; +} + + +static void *read_thread(void *threadid) +{ + unsigned int cnt; + int rx_pkt_cnt, rb_read; + unsigned int i; + unsigned long crc, ck_sum; + unsigned int rx_crc, pkt_len, pkt_seq; + unsigned long bytes_transfered; + struct timeval start_time; + unsigned int prev_seq = 0; + int first = 1; + long tid; + __u8 *p; + + + tid = (long)threadid; + printf("Greetings from the reading thread(%ld)!\n", tid); + + // IMPORTANT: must assume max length packet from fpga + + rx_pkt_cnt = 0; + rb_read = 0; + + bytes_transfered = 0; + gettimeofday(&start_time, NULL); + + while (1) { + + while (!((*rxi)[rb_read].flags & RB_USER)) { + struct pollfd pfd; + pfd.fd = fp; + pfd.events = POLLIN; + poll(&pfd, 1, -1); + } + (*rxi)[rb_read].flags = RB_USER_PROCESS; + + rx_pkt_cnt++; + cnt = (*rxi)[rb_read].len; + p = rx_buf + (rb_read * 2048); + + rx_crc = *(int *) &p[cnt-4]; + crc = 0xFFFFFFFF; + ck_sum = 0; + + pkt_len = *(unsigned int *) &p[0]; + pkt_seq = *(unsigned int *) &p[4]; + +// printf("Pkt len = %X, pkt seq = %X, driver len = %X\n", pkt_len, pkt_seq, cnt); + + if (pkt_len != (cnt - 4)) + printf("Packet length check fail, driver len = %ud, content = %ud\n", + cnt, pkt_len); + + if (!first && (pkt_seq != (prev_seq + 1))) + printf("Sequence number check fail, pkt_seq = %ud, prev_seq = %ud\n", + pkt_seq, prev_seq); + first = 0; + prev_seq = pkt_seq; + + for (i = 0; i < cnt-4; i++) { + ck_sum += p[i]; + + crc = ((crc >> 8) & 0x00FFFFFF) ^ + crc_tab[(crc ^ p[i]) & 0xFF]; +//printf("idx = %d, data = %X, crc = %X, ck_sum = %X\n", i, p[i], crc, ck_sum); +// crc = ((crc >> 8) & 0x00FFFFFF) ^ +// crc_tab[(crc ^ p[i+1]) & 0xFF]; +//printf("idx = %d, data = %X, crc = %X\n", i, p[i+1],crc); + } + + (*rxi)[rb_read].flags = RB_KERNEL; + write(fp, NULL, 1); + + if (rx_crc != ck_sum) + printf("Ck_sum eror, calc ck_sum = %lX, rx ck_sum = %X\n", + ck_sum, rx_crc); + +#if 0 + if (rx_crc != (crc & 0xFFFFFFFF)) { + printf("CRC Error, calc crc: %X, rx_crc: %X\n", + (crc & 0xFFFFFFFF), rx_crc); + } +#endif + + rb_read++; + if (rb_read == rb_size.num_rx_frames) + rb_read = 0; + + bytes_transfered += cnt; + + if (bytes_transfered > (100 * 1000000)) { + struct timeval finish_time, d_time; + float elapsed_seconds; + + gettimeofday(&finish_time, NULL); + + printf("sec = %ld, usec = %ld\n", finish_time.tv_sec, finish_time.tv_usec); + + d_time = delta_time(finish_time, start_time); + + elapsed_seconds = (float)d_time.tv_sec + ((float)d_time.tv_usec * 1e-6f); + + printf("Bytes transfered = %ld, elapsed seconds = %f\n", bytes_transfered, elapsed_seconds); + printf("RX data transfer rate = %f K Samples/second\n", + (float) bytes_transfered / (float) elapsed_seconds / 4000); + + + start_time = finish_time; + bytes_transfered = 0; + } + } + return NULL; +} + +static void *write_thread(void *threadid) +{ + int i, tx_pkt_cnt, rb_write; + int tx_len; + unsigned long crc; + unsigned long bytes_transfered; + struct timeval start_time; + unsigned int pkt_seq = 0; + long tid; + __u8 *p; + + tid = (long)threadid; + printf("Greetings from the write thread(%ld)!\n", tid); + + rb_write = 0; + tx_pkt_cnt = 0; + + bytes_transfered = 0; + gettimeofday(&start_time, NULL); + + while (1) { + + tx_pkt_cnt++; + p = tx_buf + (rb_write * 2048); + +// printf("p = %p\n", p); + + if (packet_data_length > 0) + tx_len = packet_data_length; + else + tx_len = (random() & 0x1ff) + (2044 - 512); + +#if 0 + if (tx_pkt_cnt == 512) { + printf("."); + fflush(stdout); + } + if (tx_pkt_cnt == 1024) { + printf("'"); + fflush(stdout); + } + if (tx_pkt_cnt == 1536) { + printf(":"); + fflush(stdout); + tx_pkt_cnt = 0; + } +#endif + +// printf("Checking for space at rb entry = %d\n", rb_write); + while (!((*txi)[rb_write].flags & RB_KERNEL)) { + struct pollfd pfd; + pfd.fd = fp; + pfd.events = POLLOUT; + poll(&pfd, 1, -1); + } +// printf("Got space\n"); + + for (i=8; i < tx_len-4; i++) { + p[i] = i & 0xFF; + } + + *(unsigned int *) &p[0] = tx_len-4; + *(unsigned int *) &p[4] = pkt_seq; + + pkt_seq++; + + crc = 0xFFFFFFFF; + for (i = 0; i < tx_len-4; i++) { +// printf("%X ", p[i]); + crc = ((crc >> 8) & 0x00FFFFFF) ^ + crc_tab[(crc ^ p[i]) & 0xFF]; + + } + *(unsigned int *) &p[tx_len-4] = crc; +// printf("\n crc = %lX\n", crc); + + (*txi)[rb_write].len = tx_len; + (*txi)[rb_write].flags = RB_USER; + + rb_write++; + if (rb_write == rb_size.num_tx_frames) + rb_write = 0; + + bytes_transfered += tx_len; + + if (bytes_transfered > (100 * 1000000)) { + struct timeval finish_time, d_time; + float elapsed_seconds; + + gettimeofday(&finish_time, NULL); + + d_time = delta_time(finish_time, start_time); + + elapsed_seconds = (float)d_time.tv_sec - ((float)d_time.tv_usec * 1e-6f); + + printf("Bytes transfered = %ld, elapsed seconds = %f\n", bytes_transfered, elapsed_seconds); + printf("TX data transfer rate = %f K Samples/second\n", + (float) bytes_transfered / (float) elapsed_seconds / 4000); + + + start_time = finish_time; + bytes_transfered = 0; + } + +// sleep(1); + } + return NULL; +} + + +int main(int argc, char *argv[]) +{ + pthread_t tx, rx; + long int t=0; + int fpga_config_flag ,decimation; + int ret, map_size, page_size; + void *rb; + + struct usrp_e_ctl16 d; + struct sched_param s = { + .sched_priority = 1 + }; + + if (argc < 4) { + printf("%s r|w|rw decimation data_size\n", argv[0]); + return -1; + } + + chksum_crc32_gentab(); + + decimation = atoi(argv[2]); + packet_data_length = atoi(argv[3]); + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + page_size = getpagesize(); + + ret = ioctl(fp, USRP_E_GET_RB_INFO, &rb_size); + + map_size = (rb_size.num_pages_rx_flags + rb_size.num_pages_tx_flags) * page_size + + (rb_size.num_rx_frames + rb_size.num_tx_frames) * (page_size >> 1); + + rb = mmap(0, map_size, PROT_READ|PROT_WRITE, MAP_SHARED, fp, 0); + if (rb == MAP_FAILED) { + perror("mmap failed"); + return -1; + } + + printf("rb = %p\n", rb); + + rxi = rb; + rx_buf = rb + (rb_size.num_pages_rx_flags * page_size); + txi = rb + (rb_size.num_pages_rx_flags * page_size) + + (rb_size.num_rx_frames * page_size >> 1); + tx_buf = rb + (rb_size.num_pages_rx_flags * page_size) + + (rb_size.num_rx_frames * page_size >> 1) + + (rb_size.num_pages_tx_flags * page_size); + + fpga_config_flag = (1<<8); + if (strcmp(argv[1], "w") == 0) + fpga_config_flag |= (1 << 11); + else if (strcmp(argv[1], "r") == 0) + fpga_config_flag |= (1 << 10); + else if (strcmp(argv[1], "rw") == 0) + fpga_config_flag |= ((1 << 10) | (1 << 11)); + + fpga_config_flag |= decimation; + + d.offset = 14; + d.count = 1; + d.buf[0] = fpga_config_flag; + ioctl(fp, USRP_E_WRITE_CTL16, &d); + + sleep(1); // in case the kernel threads need time to start. FIXME if so + + sched_setscheduler(0, SCHED_RR, &s); + + if (fpga_config_flag & (1 << 10)) { + if (pthread_create(&rx, NULL, read_thread, (void *) t)) { + printf("Failed to create rx thread\n"); + exit(-1); + } + } + + sleep(1); + + if (fpga_config_flag & (1 << 11)) { + if (pthread_create(&tx, NULL, write_thread, (void *) t)) { + printf("Failed to create tx thread\n"); + exit(-1); + } + } + + sleep(10000); + + printf("Done sleeping\n"); + + return 0; +} diff --git a/host/usrp_e_utils/usrp-e-utility.cpp b/host/usrp_e_utils/usrp-e-utility.cpp new file mode 100644 index 000000000..b926cf49d --- /dev/null +++ b/host/usrp_e_utils/usrp-e-utility.cpp @@ -0,0 +1,75 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/safe_main.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <stdexcept> +#include <iostream> + +#include "fpga_downloader.cpp" +#include "clkgen_config.hpp" + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + + //variables to be set by po + std::string fpga_path; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("fpga", po::value<std::string>(&fpga_path), "loads the specified FPGA file") + ("reclk", "runs the clock recovery") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD USRP-E Utility %s") % desc << std::endl; + return ~0; + } + + bool loaded_fpga_image = false; + if (vm.count("fpga") != 0){ + std::cout << "USRP-E Utility loading the FPGA..." << std::endl << std::endl; + usrp_e100_load_fpga(fpga_path); + loaded_fpga_image = true; + sleep(1); + } + + if (vm.count("reclk") != 0){ + std::cout << "USRP-E Utility running the clock recovery..." << std::flush; + //if an image was not loaded or specified, we load pass-through + if (fpga_path.empty()) throw std::runtime_error( + "Please specify the path to the pass-though FPGA image for your device.\n" + " usrp-e-utility --reclk --fpga=/usr/share/uhd/images/usrp_e1xx_pt_fpga.bin" + ); + clock_genconfig_main(); + if (std::system("rm /tmp/usrp*hash") != 0){ //clear hash so driver must reload + std::cerr << "No hash to remove! Don't worry, its not a problem." << std::endl; + } + } + + std::cout << "Done!" << std::endl; + + return 0; +} diff --git a/host/usrp_e_utils/usrp-e-wb-test.cpp b/host/usrp_e_utils/usrp-e-wb-test.cpp new file mode 100644 index 000000000..3d6a8d101 --- /dev/null +++ b/host/usrp_e_utils/usrp-e-wb-test.cpp @@ -0,0 +1,115 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <cstdlib> +#include <cstdio> +#include <ctime> +#include <iostream> + +#include <sys/ioctl.h> //ioctl +#include <fcntl.h> //open, close + +#include <linux/usrp_e.h> +#include "usrp_e100_regs.hpp" + +static const size_t num_test_iters = 10000000; + +static int fp; + +static int peek16(int reg){ + int ret; + struct usrp_e_ctl16 d; + + d.offset = reg; + d.count = 1; + ret = ioctl(fp, USRP_E_READ_CTL16, &d); + return d.buf[0]; +} + +static void poke16(int reg, int val){ + int ret; + struct usrp_e_ctl16 d; + + d.offset = reg; + d.count = 1; + d.buf[0] = val; + ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); +} + +static int peek32(int reg){ + int ret; + struct usrp_e_ctl32 d; + + d.offset = reg; + d.count = 1; + ret = ioctl(fp, USRP_E_READ_CTL32, &d); + return d.buf[0]; +} + +static void poke32(int reg, int val){ + int ret; + struct usrp_e_ctl32 d; + + d.offset = reg; + d.count = 1; + d.buf[0] = val; + ret = ioctl(fp, USRP_E_WRITE_CTL32, &d); +} + +int main(int, char *[]){ + + srandom(time(NULL)); //seed random() + + if ((fp = ::open("/dev/usrp_e0", O_RDWR)) < 0){ + std::cerr << "Open failed" << std::endl; + return -1; + } + + size_t num_pass = 0, num_fail = 0; + for (size_t i = 0; i < num_test_iters; i++){ + if(i%1000000 == 0) { + std::cout << "num pass: " << num_pass; + std::cout << "\tnum fail: " << num_fail << std::endl; + } + //make random values + int random_test32 = ::random(); + int random_test16 = ::random() & 0xffff; + int random_secs = ::random(); + + //set a bunch of registers + poke16(UE_REG_MISC_TEST, random_test16); + poke32(UE_REG_SR_MISC_TEST32, random_test32); + poke32(UE_REG_TIME64_TICKS, 0); + poke32(UE_REG_TIME64_IMM, 1); //immediate + poke32(UE_REG_TIME64_SECS, random_secs); + + //read a bunch of registers + if ( + (peek16(UE_REG_MISC_TEST) == random_test16) and + (peek32(UE_REG_RB_MISC_TEST32) == random_test32) and + (peek32(UE_REG_RB_TIME_NOW_SECS) == random_secs) and +// (peek32(UE_REG_RB_TIME_NOW_TICKS) < 1000000) and + true) num_pass++; + else num_fail++; + } + + std::cout << "num pass: " << num_pass << std::endl; + std::cout << "num fail: " << num_fail << std::endl; + + ::close(fp); + return 0; +} diff --git a/host/utils/CMakeLists.txt b/host/utils/CMakeLists.txt new file mode 100644 index 000000000..53527c03d --- /dev/null +++ b/host/utils/CMakeLists.txt @@ -0,0 +1,64 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Utilities that get installed into the runtime path +######################################################################## +SET(util_runtime_sources + uhd_find_devices.cpp + uhd_usrp_probe.cpp +) + +#for each source: build an executable and install +FOREACH(util_source ${util_runtime_sources}) + GET_FILENAME_COMPONENT(util_name ${util_source} NAME_WE) + ADD_EXECUTABLE(${util_name} ${util_source}) + TARGET_LINK_LIBRARIES(${util_name} uhd) + INSTALL(TARGETS ${util_name} RUNTIME DESTINATION ${RUNTIME_DIR}) +ENDFOREACH(util_source) + +######################################################################## +# Utilities that get installed into the share path +######################################################################## +SET(util_share_sources + usrp_burn_db_eeprom.cpp + usrp_burn_mb_eeprom.cpp +) + +IF(ENABLE_USRP1) + LIST(APPEND util_share_sources + usrp1_init_eeprom.cpp + ) +ENDIF(ENABLE_USRP1) + +#for each source: build an executable and install +FOREACH(util_source ${util_share_sources}) + GET_FILENAME_COMPONENT(util_name ${util_source} NAME_WE) + ADD_EXECUTABLE(${util_name} ${util_source}) + TARGET_LINK_LIBRARIES(${util_name} uhd) + INSTALL(TARGETS ${util_name} RUNTIME DESTINATION ${PKG_DATA_DIR}/utils) +ENDFOREACH(util_source) + +IF(ENABLE_USRP2) + INSTALL(PROGRAMS + usrp2_recovery.py + usrp2_card_burner.py + usrp2_card_burner_gui.py + usrp_n2xx_net_burner.py + DESTINATION ${PKG_DATA_DIR}/utils + ) +ENDIF(ENABLE_USRP2) diff --git a/host/utils/uhd_find_devices.cpp b/host/utils/uhd_find_devices.cpp new file mode 100644 index 000000000..b778eeb68 --- /dev/null +++ b/host/utils/uhd_find_devices.cpp @@ -0,0 +1,60 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/safe_main.hpp> +#include <uhd/device.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <iostream> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>()->default_value(""), "device address args") + ; + + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD Find Devices %s") % desc << std::endl; + return ~0; + } + + //discover the usrps and print the results + uhd::device_addrs_t device_addrs = uhd::device::find(vm["args"].as<std::string>()); + + if (device_addrs.size() == 0){ + std::cerr << "No UHD Devices Found" << std::endl; + return ~0; + } + + for (size_t i = 0; i < device_addrs.size(); i++){ + std::cout << "--------------------------------------------------" << std::endl; + std::cout << "-- UHD Device " << i << std::endl; + std::cout << "--------------------------------------------------" << std::endl; + std::cout << device_addrs[i].to_pp_string() << std::endl << std::endl; + //uhd::device::make(device_addrs[i]); //test make + } + + return 0; +} diff --git a/host/utils/uhd_usrp_probe.cpp b/host/utils/uhd_usrp_probe.cpp new file mode 100644 index 000000000..b32131b2a --- /dev/null +++ b/host/utils/uhd_usrp_probe.cpp @@ -0,0 +1,180 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/safe_main.hpp> +#include <uhd/device.hpp> +#include <uhd/types/ranges.hpp> +#include <boost/algorithm/string.hpp> //for split +#include <uhd/usrp/device_props.hpp> +#include <uhd/usrp/mboard_props.hpp> +#include <uhd/usrp/dboard_props.hpp> +#include <uhd/usrp/codec_props.hpp> +#include <uhd/usrp/dsp_props.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/usrp/dboard_id.hpp> +#include <uhd/usrp/mboard_eeprom.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <boost/foreach.hpp> +#include <iostream> +#include <sstream> +#include <vector> + +namespace po = boost::program_options; +using namespace uhd; + +static std::string indent(size_t level){ + return (level)? (indent(level-1) + " ") : ""; +} + +static std::string make_border(const std::string &text){ + std::stringstream ss; + ss << boost::format(" _____________________________________________________") << std::endl; + ss << boost::format(" /") << std::endl; + std::vector<std::string> lines; boost::split(lines, text, boost::is_any_of("\n")); + while (lines.back() == "") lines.pop_back(); //strip trailing newlines + if (lines.size()) lines[0] = " " + lines[0]; //indent the title line + BOOST_FOREACH(const std::string &line, lines){ + ss << boost::format("| %s") % line << std::endl; + } + //ss << boost::format(" \\____________________________________________________") << std::endl; + return ss.str(); +} + +static std::string get_dsp_pp_string(const std::string &type, wax::obj dsp){ + std::stringstream ss; + ss << boost::format("%s DSP: %s") % type % dsp[usrp::DSP_PROP_NAME].as<std::string>() << std::endl; + //ss << std::endl; + ss << boost::format("Codec Rate: %f Msps") % (dsp[usrp::DSP_PROP_CODEC_RATE].as<double>()/1e6) << std::endl; + //ss << boost::format("Host Rate: %f Msps") % (dsp[usrp::DSP_PROP_HOST_RATE].as<double>()/1e6) << std::endl; + //ss << boost::format("Freq Shift: %f Mhz") % (dsp[usrp::DSP_PROP_FREQ_SHIFT].as<double>()/1e6) << std::endl; + return ss.str(); +} + +static std::string prop_names_to_pp_string(const prop_names_t &prop_names){ + std::stringstream ss; size_t count = 0; + BOOST_FOREACH(const std::string &prop_name, prop_names){ + ss << ((count++)? ", " : "") << prop_name; + } + return ss.str(); +} + +static std::string get_subdev_pp_string(const std::string &type, wax::obj subdev){ + std::stringstream ss; + ss << boost::format("%s Subdev: %s") % type % subdev[usrp::SUBDEV_PROP_NAME].as<std::string>() << std::endl; + //ss << std::endl; + + prop_names_t ant_names(subdev[usrp::SUBDEV_PROP_ANTENNA_NAMES].as<prop_names_t>()); + ss << boost::format("Antennas: %s") % prop_names_to_pp_string(ant_names) << std::endl; + + freq_range_t freq_range(subdev[usrp::SUBDEV_PROP_FREQ_RANGE].as<freq_range_t>()); + ss << boost::format("Freq range: %.3f to %.3f Mhz") % (freq_range.start()/1e6) % (freq_range.stop()/1e6) << std::endl; + + prop_names_t gain_names(subdev[usrp::SUBDEV_PROP_GAIN_NAMES].as<prop_names_t>()); + if (gain_names.size() == 0) ss << "Gain Elements: None" << std::endl; + BOOST_FOREACH(const std::string &gain_name, gain_names){ + gain_range_t gain_range(subdev[named_prop_t(usrp::SUBDEV_PROP_GAIN_RANGE, gain_name)].as<gain_range_t>()); + ss << boost::format("Gain range %s: %.1f to %.1f step %.1f dB") % gain_name % gain_range.start() % gain_range.stop() % gain_range.step() << std::endl; + } + + ss << boost::format("Connection Type: %c") % char(subdev[usrp::SUBDEV_PROP_CONNECTION].as<usrp::subdev_conn_t>()) << std::endl; + ss << boost::format("Uses LO offset: %s") % (subdev[usrp::SUBDEV_PROP_USE_LO_OFFSET].as<bool>()? "Yes" : "No") << std::endl; + + return ss.str(); +} + +static std::string get_codec_pp_string(const std::string &type, wax::obj codec){ + std::stringstream ss; + ss << boost::format("%s Codec: %s") % type % codec[usrp::CODEC_PROP_NAME].as<std::string>() << std::endl; + //ss << std::endl; + prop_names_t gain_names(codec[usrp::CODEC_PROP_GAIN_NAMES].as<prop_names_t>()); + if (gain_names.size() == 0) ss << "Gain Elements: None" << std::endl; + BOOST_FOREACH(const std::string &gain_name, gain_names){ + gain_range_t gain_range(codec[named_prop_t(usrp::CODEC_PROP_GAIN_RANGE, gain_name)].as<gain_range_t>()); + ss << boost::format("Gain range %s: %.1f to %.1f step %.1f dB") % gain_name % gain_range.start() % gain_range.stop() % gain_range.step() << std::endl; + } + return ss.str(); +} + +static std::string get_dboard_pp_string(const std::string &type, wax::obj dboard){ + std::stringstream ss; + ss << boost::format("%s Dboard: %s") % type % dboard[usrp::DBOARD_PROP_NAME].as<std::string>() << std::endl; + //ss << std::endl; + BOOST_FOREACH(const std::string &subdev_name, dboard[usrp::DBOARD_PROP_SUBDEV_NAMES].as<prop_names_t>()){ + ss << make_border(get_subdev_pp_string(type, dboard[named_prop_t(usrp::DBOARD_PROP_SUBDEV, subdev_name)])); + } + ss << make_border(get_codec_pp_string(type, dboard[usrp::DBOARD_PROP_CODEC])); + return ss.str(); +} + +static std::string get_mboard_pp_string(wax::obj mboard){ + std::stringstream ss; + ss << boost::format("Mboard: %s") % mboard[usrp::MBOARD_PROP_NAME].as<std::string>() << std::endl; + //ss << std::endl; + usrp::mboard_eeprom_t mb_eeprom = mboard[usrp::MBOARD_PROP_EEPROM_MAP].as<usrp::mboard_eeprom_t>(); + BOOST_FOREACH(const std::string &key, mb_eeprom.keys()){ + if (not mb_eeprom[key].empty()) ss << boost::format("%s: %s") % key % mb_eeprom[key] << std::endl; + } + BOOST_FOREACH(const std::string &dsp_name, mboard[usrp::MBOARD_PROP_RX_DSP_NAMES].as<prop_names_t>()){ + ss << make_border(get_dsp_pp_string("RX", mboard[named_prop_t(usrp::MBOARD_PROP_RX_DSP, dsp_name)])); + } + BOOST_FOREACH(const std::string &dsp_name, mboard[usrp::MBOARD_PROP_TX_DSP_NAMES].as<prop_names_t>()){ + ss << make_border(get_dsp_pp_string("TX", mboard[named_prop_t(usrp::MBOARD_PROP_TX_DSP, dsp_name)])); + } + BOOST_FOREACH(const std::string &dsp_name, mboard[usrp::MBOARD_PROP_RX_DBOARD_NAMES].as<prop_names_t>()){ + ss << make_border(get_dboard_pp_string("RX", mboard[named_prop_t(usrp::MBOARD_PROP_RX_DBOARD, dsp_name)])); + } + BOOST_FOREACH(const std::string &dsp_name, mboard[usrp::MBOARD_PROP_TX_DBOARD_NAMES].as<prop_names_t>()){ + ss << make_border(get_dboard_pp_string("TX", mboard[named_prop_t(usrp::MBOARD_PROP_TX_DBOARD, dsp_name)])); + } + return ss.str(); +} + + +static std::string get_device_pp_string(device::sptr dev){ + std::stringstream ss; + ss << boost::format("Device: %s") % (*dev)[usrp::DEVICE_PROP_NAME].as<std::string>() << std::endl; + //ss << std::endl; + BOOST_FOREACH(const std::string &mboard_name, (*dev)[usrp::DEVICE_PROP_MBOARD_NAMES].as<prop_names_t>()){ + ss << make_border(get_mboard_pp_string((*dev)[named_prop_t(usrp::DEVICE_PROP_MBOARD, mboard_name)])); + } + return ss.str(); +} + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>()->default_value(""), "device address args") + ; + + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD USRP Probe %s") % desc << std::endl; + return ~0; + } + + device::sptr dev = device::make(vm["args"].as<std::string>()); + + std::cout << make_border(get_device_pp_string(dev)) << std::endl; + + return 0; +} diff --git a/host/utils/usrp1_init_eeprom.cpp b/host/utils/usrp1_init_eeprom.cpp new file mode 100644 index 000000000..b05e400b1 --- /dev/null +++ b/host/utils/usrp1_init_eeprom.cpp @@ -0,0 +1,69 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/safe_main.hpp> +#include <uhd/device.hpp> +#include <uhd/usrp/device_props.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <iostream> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("image", po::value<std::string>(), "BIN image file") + ; + + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("USRP EEPROM initialization %s") % desc << std::endl; + return ~0; + } + + //load the options into the address + uhd::device_addr_t device_addr; + device_addr["type"] = "usrp1"; + device_addr["uninit"] = "yeah"; //tell find to look for an uninitialized FX2 + + //find and create a control transport to do the writing. + + uhd::device_addrs_t found_addrs = uhd::device::find(device_addr); + + if (found_addrs.size() == 0){ + std::cerr << "No uninitialized USRP devices found" << std::endl; + return ~0; + } + + for (size_t i = 0; i < found_addrs.size(); i++){ + std::cout << "Writing EEPROM data..." << std::endl; + //uhd::device_addrs_t devs = uhd::device::find(found_addrs[i]); + uhd::device::sptr dev = uhd::device::make(found_addrs[i]); + wax::obj mb = (*dev)[uhd::usrp::DEVICE_PROP_MBOARD]; + mb[std::string("load_eeprom")] = vm["image"].as<std::string>(); + } + + + std::cout << "Power-cycle the usrp for the changes to take effect." << std::endl; + return 0; +} diff --git a/host/utils/usrp2_card_burner.py b/host/utils/usrp2_card_burner.py new file mode 100755 index 000000000..1db5e59ce --- /dev/null +++ b/host/utils/usrp2_card_burner.py @@ -0,0 +1,246 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +import platform +import tempfile +import subprocess +import urllib +import optparse +import math +import os +import re + +######################################################################## +# constants +######################################################################## +SECTOR_SIZE = 512 # bytes +MAX_FILE_SIZE = 1 * (2**20) # maximum number of bytes we'll burn to a slot + +FPGA_OFFSET = 0 # offset in flash to fpga image +FIRMWARE_OFFSET = 1 * (2**20) # offset in flash to firmware image + +MAX_SD_CARD_SIZE = 2048e6 # bytes (any bigger is sdhc) + +######################################################################## +# helper functions +######################################################################## +def command(*args): + p = subprocess.Popen( + args, + stdout=subprocess.PIPE, + stderr=subprocess.STDOUT, + ) + ret = p.wait() + verbose = p.stdout.read() + if ret != 0: raise Exception, verbose + return verbose + +def get_dd_path(): + if platform.system() == 'Windows': + dd_path = os.path.join(tempfile.gettempdir(), 'dd.exe') + if not os.path.exists(dd_path): + print 'Downloading dd.exe to %s'%dd_path + dd_bin = urllib.urlopen('http://www.ettus.com/downloads/dd.exe').read() + open(dd_path, 'wb').write(dd_bin) + return dd_path + return 'dd' + +def int_ceil_div(num, den): + return int(math.ceil(float(num)/float(den))) + +def get_tmp_file(): + tmp = tempfile.mkstemp() + os.close(tmp[0]) + return tmp[1] + +######################################################################## +# list possible devices +######################################################################## +def get_raw_device_hints(): + #################################################################### + # Platform Windows: parse the output of dd.exe --list + #################################################################### + if platform.system() == 'Windows': + def extract_info_value(info, key): + return info.split(key)[-1].split()[0] + def get_info_list(output): + in_info = False + for line in output.splitlines(): + if line.startswith('\\\\'): in_info = True; info = '' + elif in_info and not line.strip(): in_info = False; yield info + if in_info: info += '\n'+line.strip() + def is_info_valid(info): + try: + assert 'link to' in info + #handles two spellings of remov(e)able: + assert 'remov' in info.lower() + if 'size is' in info: assert int(extract_info_value(info, 'size is')) <= MAX_SD_CARD_SIZE + return True + except: return False + def extract_info_name(info): + for key in ('Mounted on', 'link to'): + if key in info: return extract_info_value(info, key) + return info.splitlines()[0].strip() + + return sorted(set(map(extract_info_name, filter(is_info_valid, get_info_list(command(get_dd_path(), '--list')))))) + + #################################################################### + # Platform Linux: parse procfs /proc/partitions + #################################################################### + if platform.system() == 'Linux': + devs = list() + try: output = open('/proc/partitions', 'r').read() + except: return devs + for line in output.splitlines(): + try: + major, minor, blocks, name = line.split() + assert not name[-1].isdigit() or int(minor) == 0 + assert int(blocks)*1024 <= MAX_SD_CARD_SIZE + except: continue + devs.append(os.path.join('/dev', name)) + + return sorted(set(devs)) + + #################################################################### + # Platform Mac OS X: parse diskutil list and info commands + #################################################################### + if platform.system() == 'Darwin': + devs = map(lambda d: d.split()[0], filter(lambda l: l.startswith('/dev'), command('diskutil', 'list').splitlines())) + def output_to_info(output): + return dict([map(str.strip, pair.lower().split(':')) for pair in filter(lambda l: ':' in l, output.splitlines())]) + def is_dev_valid(dev): + info = output_to_info(command('diskutil', 'info', dev)) + try: + if info.has_key('internal'): assert info['internal'] == 'no' + if info.has_key('ejectable'): assert info['ejectable'] == 'yes' + if info.has_key('total size'): + size_match = re.match('^.*\((\d+)\s*bytes\).*$', info['total size']) + if size_match: assert int(size_match.groups()[0]) <= MAX_SD_CARD_SIZE + return True + except: return False + + return sorted(set(filter(is_dev_valid, devs))) + + #################################################################### + # Platform Others: + #################################################################### + return () + +######################################################################## +# write and verify with dd +######################################################################## +def verify_image(image_file, device_file, offset): + #create a temporary file to store the readback image + tmp_file = get_tmp_file() + + #read the image data + img_data = open(image_file, 'rb').read() + count = int_ceil_div(len(img_data), SECTOR_SIZE) + + #execute a dd subprocess + verbose = command( + get_dd_path(), + "of=%s"%tmp_file, + "if=%s"%device_file, + "skip=%d"%(offset/SECTOR_SIZE), + "bs=%d"%SECTOR_SIZE, + "count=%d"%count, + ) + + #verfy the data + tmp_data = open(tmp_file, 'rb').read(len(img_data)) + if img_data != tmp_data: return 'Verification Failed:\n%s'%verbose + return 'Verification Passed:\n%s'%verbose + +def write_image(image_file, device_file, offset): + #create a temporary file to store the padded image + tmp_file = get_tmp_file() + + #write the padded image data + img_data = open(image_file, 'rb').read() + count = int_ceil_div(len(img_data), SECTOR_SIZE) + pad_len = SECTOR_SIZE*count - len(img_data) + pad_str = ''.join([chr(0)]*pad_len) #zero-padding + open(tmp_file, 'wb').write(img_data + pad_str) + + #execute a dd subprocess + verbose = command( + get_dd_path(), + "if=%s"%tmp_file, + "of=%s"%device_file, + "seek=%d"%(offset/SECTOR_SIZE), + "bs=%d"%SECTOR_SIZE, + "count=%d"%count, + ) + + try: #exec the sync command (only works on linux) + if platform.system() == 'Linux': command('sync') + except: pass + + return verbose + +def write_and_verify(image_file, device_file, offset): + if os.path.getsize(image_file) > MAX_FILE_SIZE: + raise Exception, 'Image file larger than %d bytes!'%MAX_FILE_SIZE + return '%s\n%s'%( + write_image( + image_file=image_file, + device_file=device_file, + offset=offset, + ), verify_image( + image_file=image_file, + device_file=device_file, + offset=offset, + ), + ) + +def burn_sd_card(dev, fw, fpga): + verbose = '' + if fw: verbose += 'Burn firmware image:\n%s\n'%write_and_verify( + image_file=fw, device_file=dev, offset=FIRMWARE_OFFSET + ) + if fpga: verbose += 'Burn fpga image:\n%s\n'%write_and_verify( + image_file=fpga, device_file=dev, offset=FPGA_OFFSET + ) + return verbose + +######################################################################## +# command line options +######################################################################## +def get_options(): + parser = optparse.OptionParser() + parser.add_option("--dev", type="string", help="raw device path", default='') + parser.add_option("--fw", type="string", help="firmware image path (optional)", default='') + parser.add_option("--fpga", type="string", help="fpga image path (optional)", default='') + parser.add_option("--list", action="store_true", help="list possible raw devices", default=False) + (options, args) = parser.parse_args() + + if options.list: + print 'Possible raw devices:' + print ' ' + '\n '.join(get_raw_device_hints()) + exit() + + return options + +######################################################################## +# main +######################################################################## +if __name__=='__main__': + options = get_options() + if not options.dev: raise Exception, 'no raw device path specified' + print burn_sd_card(dev=options.dev, fw=options.fw, fpga=options.fpga) diff --git a/host/utils/usrp2_card_burner_gui.py b/host/utils/usrp2_card_burner_gui.py new file mode 100755 index 000000000..58b7a514a --- /dev/null +++ b/host/utils/usrp2_card_burner_gui.py @@ -0,0 +1,169 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +import usrp2_card_burner #import implementation +import Tkinter, tkFileDialog, tkFont, tkMessageBox +import os + +class BinFileEntry(Tkinter.Frame): + """ + Simple file entry widget for getting the file path of bin files. + Combines a label, entry, and button with file dialog callback. + """ + + def __init__(self, root, what, def_path=''): + self._what = what + Tkinter.Frame.__init__(self, root) + Tkinter.Label(self, text=what+":").pack(side=Tkinter.LEFT) + self._entry = Tkinter.Entry(self, width=50) + self._entry.insert(Tkinter.END, def_path) + self._entry.pack(side=Tkinter.LEFT) + Tkinter.Button(self, text="...", command=self._button_cb).pack(side=Tkinter.LEFT) + + def _button_cb(self): + filename = tkFileDialog.askopenfilename( + parent=self, + filetypes=[('bin files', '*.bin'), ('all files', '*.*')], + title="Select bin file for %s"%self._what, + initialdir=os.path.dirname(self.get_filename()), + ) + + # open file on your own + if filename: + self._entry.delete(0, Tkinter.END) + self._entry.insert(0, filename) + + def get_filename(self): + return self._entry.get() + +class DeviceEntryWidget(Tkinter.Frame): + """ + Simple entry widget for getting the raw device name. + Combines a label, entry, and helpful text box with hints. + """ + + def __init__(self, root, text=''): + Tkinter.Frame.__init__(self, root) + + Tkinter.Button(self, text="Rescan for Devices", command=self._reload_cb).pack() + + self._hints = Tkinter.Listbox(self) + self._hints.bind("<<ListboxSelect>>", self._listbox_cb) + self._reload_cb() + self._hints.pack(expand=Tkinter.YES, fill=Tkinter.X) + + frame = Tkinter.Frame(self) + frame.pack() + + Tkinter.Label(frame, text="Raw Device:").pack(side=Tkinter.LEFT) + self._entry = Tkinter.Entry(frame, width=50) + self._entry.insert(Tkinter.END, text) + self._entry.pack(side=Tkinter.LEFT) + + def _reload_cb(self): + self._hints.delete(0, Tkinter.END) + for hint in usrp2_card_burner.get_raw_device_hints(): + self._hints.insert(Tkinter.END, hint) + + def _listbox_cb(self, event): + try: + sel = self._hints.get(self._hints.curselection()[0]) + self._entry.delete(0, Tkinter.END) + self._entry.insert(0, sel) + except Exception, e: print e + + def get_devname(self): + return self._entry.get() + +class SectionLabel(Tkinter.Label): + """ + Make a text label with bold font. + """ + + def __init__(self, root, text): + Tkinter.Label.__init__(self, root, text=text) + + #set the font bold + f = tkFont.Font(font=self['font']) + f['weight'] = 'bold' + self['font'] = f.name + +class USRP2CardBurnerApp(Tkinter.Frame): + """ + The top level gui application for the usrp2 sd card burner. + Creates entry widgets and button with callback to write images. + """ + + def __init__(self, root, dev, fw, fpga): + + Tkinter.Frame.__init__(self, root) + + #pack the file entry widgets + SectionLabel(self, text="Select Images").pack(pady=5) + self._fw_img_entry = BinFileEntry(self, "Firmware Image", def_path=fw) + self._fw_img_entry.pack() + self._fpga_img_entry = BinFileEntry(self, "FPGA Image", def_path=fpga) + self._fpga_img_entry.pack() + + #pack the destination entry widget + SectionLabel(self, text="Select Device").pack(pady=5) + self._raw_dev_entry = DeviceEntryWidget(self, text=dev) + self._raw_dev_entry.pack() + + #the do it button + SectionLabel(self, text="").pack(pady=5) + Tkinter.Label(self, text="Warning! This tool can overwrite your hard drive. Use with caution.").pack() + Tkinter.Button(self, text="Burn SD Card", command=self._burn).pack() + + def _burn(self): + #grab strings from the gui + fw = self._fw_img_entry.get_filename() + fpga = self._fpga_img_entry.get_filename() + dev = self._raw_dev_entry.get_devname() + + #check input + if not dev: + tkMessageBox.showerror('Error:', 'No device specified!') + return + if not fw and not fpga: + tkMessageBox.showerror('Error:', 'No images specified!') + return + if fw and not os.path.exists(fw): + tkMessageBox.showerror('Error:', 'Firmware image not found!') + return + if fpga and not os.path.exists(fpga): + tkMessageBox.showerror('Error:', 'FPGA image not found!') + return + + #burn the sd card + try: + verbose = usrp2_card_burner.burn_sd_card(dev=dev, fw=fw, fpga=fpga) + tkMessageBox.showinfo('Verbose:', verbose) + except Exception, e: + tkMessageBox.showerror('Verbose:', 'Error: %s'%str(e)) + +######################################################################## +# main +######################################################################## +if __name__=='__main__': + options = usrp2_card_burner.get_options() + root = Tkinter.Tk() + root.title('USRP2 SD Card Burner') + USRP2CardBurnerApp(root, dev=options.dev, fw=options.fw, fpga=options.fpga).pack() + root.mainloop() + exit() diff --git a/host/utils/usrp2_recovery.py b/host/utils/usrp2_recovery.py new file mode 100755 index 000000000..5654e93d3 --- /dev/null +++ b/host/utils/usrp2_recovery.py @@ -0,0 +1,68 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +""" +The usrp2 recovery app: + +When the usrp2 has an unknown or bad ip address in its eeprom, +it may not be possible to communicate with the usrp2 over ip/udp. + +This app will send a raw ethernet packet to bypass the ip layer. +The packet will contain a known ip address to burn into eeprom. +Because the recovery packet is sent with a broadcast mac address, +only one usrp2 should be present on the interface upon execution. + +This app requires super-user privileges and only works on linux. +""" + +import socket +import struct +import optparse + +BCAST_MAC_ADDR = 'ff:ff:ff:ff:ff:ff' +RECOVERY_ETHERTYPE = 0xbeee +IP_RECOVERY_CODE = 'addr' + +def mac_addr_repr_to_binary_string(mac_addr): + return ''.join(map(lambda x: chr(int(x, 16)), mac_addr.split(':'))) + +if __name__ == '__main__': + parser = optparse.OptionParser(usage='usage: %prog [options]\n'+__doc__) + parser.add_option('--ifc', type='string', help='ethernet interface name [default=%default]', default='eth0') + parser.add_option('--new-ip', type='string', help='ip address to set [default=%default]', default='192.168.10.2') + (options, args) = parser.parse_args() + + #create the raw socket + print "Opening raw socket on interface:", options.ifc + soc = socket.socket(socket.PF_PACKET, socket.SOCK_RAW) + soc.bind((options.ifc, RECOVERY_ETHERTYPE)) + + #create the recovery packet + print "Loading packet with ip address:", options.new_ip + packet = struct.pack( + '!6s6sH4s4s', + mac_addr_repr_to_binary_string(BCAST_MAC_ADDR), + mac_addr_repr_to_binary_string(BCAST_MAC_ADDR), + RECOVERY_ETHERTYPE, + IP_RECOVERY_CODE, + socket.inet_aton(options.new_ip), + ) + + print "Sending packet (%d bytes)"%len(packet) + soc.send(packet) + print "Done" diff --git a/host/utils/usrp_burn_db_eeprom.cpp b/host/utils/usrp_burn_db_eeprom.cpp new file mode 100644 index 000000000..617417e09 --- /dev/null +++ b/host/utils/usrp_burn_db_eeprom.cpp @@ -0,0 +1,103 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + + +#include <uhd/utils/safe_main.hpp> +#include <uhd/device.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/utils/assert_has.hpp> +#include <uhd/usrp/dboard_eeprom.hpp> +#include <uhd/usrp/device_props.hpp> +#include <uhd/usrp/mboard_props.hpp> +#include <uhd/usrp/dboard_props.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <boost/assign.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + //command line variables + std::string args, slot, unit; + static const uhd::dict<std::string, mboard_prop_t> unit_to_db_prop = boost::assign::map_list_of + ("RX", MBOARD_PROP_RX_DBOARD) ("TX", MBOARD_PROP_TX_DBOARD) + ; + static const uhd::dict<std::string, mboard_prop_t> unit_to_db_names_prop = boost::assign::map_list_of + ("RX", MBOARD_PROP_RX_DBOARD_NAMES) ("TX", MBOARD_PROP_TX_DBOARD_NAMES) + ; + + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "device address args [default = \"\"]") + ("slot", po::value<std::string>(&slot)->default_value(""), "dboard slot name [default is blank for automatic]") + ("unit", po::value<std::string>(&unit)->default_value(""), "which unit [RX or TX]") + ("id", po::value<std::string>(), "dboard id to burn, omit for readback") + ("ser", po::value<std::string>(), "serial to burn, omit for readback") + ; + + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("USRP Burn Daughterboard EEPROM %s") % desc << std::endl; + std::cout << boost::format( + "Omit the ID argument to perform readback,\n" + "Or specify a new ID to burn into the EEPROM.\n" + ) << std::endl; + return ~0; + } + + //check inputs + if (not unit_to_db_prop.has_key(unit)){ + std::cout << "Error: specify RX or TX for unit" << std::endl; + return ~0; + } + + //make the device and extract the dboard w/ property + device::sptr dev = device::make(args); + uhd::prop_names_t dboard_names = (*dev)[DEVICE_PROP_MBOARD][unit_to_db_names_prop[unit]].as<uhd::prop_names_t>(); + if (dboard_names.size() == 1 and slot.empty()) slot = dboard_names.front(); + uhd::assert_has(dboard_names, slot, "dboard slot name"); + wax::obj dboard = (*dev)[DEVICE_PROP_MBOARD][named_prop_t(unit_to_db_prop[unit], slot)]; + std::string prefix = unit + ":" + slot; + + std::cout << boost::format("Reading EEPROM on %s dboard...") % prefix << std::endl; + dboard_eeprom_t db_eeprom = dboard[DBOARD_PROP_DBOARD_EEPROM].as<dboard_eeprom_t>(); + + //------------- handle the dboard ID -----------------------------// + if (vm.count("id")){ + db_eeprom.id = dboard_id_t::from_string(vm["id"].as<std::string>()); + dboard[DBOARD_PROP_DBOARD_EEPROM] = db_eeprom; + } + std::cout << boost::format(" Current ID: %s") % db_eeprom.id.to_pp_string() << std::endl; + + //------------- handle the dboard serial--------------------------// + if (vm.count("ser")){ + db_eeprom.serial = vm["ser"].as<std::string>(); + dboard[DBOARD_PROP_DBOARD_EEPROM] = db_eeprom; + } + std::cout << boost::format(" Current serial: \"%s\"") % db_eeprom.serial << std::endl; + + std::cout << " Done" << std::endl << std::endl; + return 0; +} diff --git a/host/utils/usrp_burn_mb_eeprom.cpp b/host/utils/usrp_burn_mb_eeprom.cpp new file mode 100644 index 000000000..20e1b58b1 --- /dev/null +++ b/host/utils/usrp_burn_mb_eeprom.cpp @@ -0,0 +1,81 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/safe_main.hpp> +#include <uhd/device.hpp> +#include <uhd/usrp/device_props.hpp> +#include <uhd/usrp/mboard_props.hpp> +#include <uhd/usrp/mboard_eeprom.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <iostream> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + std::string args, key, val; + + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "device address args [default = \"\"]") + ("key", po::value<std::string>(&key), "the indentifier for a value in EEPROM") + ("val", po::value<std::string>(&val), "the new value to set, omit for readback") + ; + + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help") or not vm.count("key")){ + std::cout << boost::format("USRP Burn Motherboard EEPROM %s") % desc << std::endl; + std::cout << boost::format( + "Omit the value argument to perform a readback,\n" + "Or specify a new value to burn into the EEPROM.\n" + ) << std::endl; + return ~0; + } + + std::cout << "Creating USRP device from address: " + args << std::endl; + uhd::device::sptr dev = uhd::device::make(args); + //FIXME the default mboard for now (may be others) + wax::obj mboard = (*dev)[uhd::usrp::DEVICE_PROP_MBOARD]; + std::cout << std::endl; + + if (true /*always readback*/){ + std::cout << "Fetching current settings from EEPROM..." << std::endl; + uhd::usrp::mboard_eeprom_t mb_eeprom = \ + mboard[uhd::usrp::MBOARD_PROP_EEPROM_MAP].as<uhd::usrp::mboard_eeprom_t>(); + if (not mb_eeprom.has_key(key)){ + std::cerr << boost::format("Cannot find value for EEPROM[%s]") % key << std::endl; + return ~0; + } + std::cout << boost::format(" EEPROM [\"%s\"] is \"%s\"") % key % mb_eeprom[key] << std::endl; + std::cout << std::endl; + } + if (vm.count("val")){ + uhd::usrp::mboard_eeprom_t mb_eeprom; mb_eeprom[key] = val; + std::cout << boost::format("Setting EEPROM [\"%s\"] to \"%s\"...") % key % val << std::endl; + mboard[uhd::usrp::MBOARD_PROP_EEPROM_MAP] = mb_eeprom; + std::cout << "Power-cycle the USRP device for the changes to take effect." << std::endl; + std::cout << std::endl; + } + + std::cout << "Done" << std::endl; + return 0; +} diff --git a/host/utils/usrp_n2xx_net_burner.py b/host/utils/usrp_n2xx_net_burner.py new file mode 100755 index 000000000..6fdc9df20 --- /dev/null +++ b/host/utils/usrp_n2xx_net_burner.py @@ -0,0 +1,369 @@ +#!/usr/bin/env python +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +# TODO: make it autodetect UHD devices +# TODO: you should probably watch sequence numbers +# TODO: validate images in 1) size and 2) header content so you can't write a Justin Bieber MP3 to Flash + +import optparse +import math +import os +import re +import struct +import socket +import sys +import time + +######################################################################## +# constants +######################################################################## +UDP_FW_UPDATE_PORT = 49154 +UDP_MAX_XFER_BYTES = 1024 +UDP_TIMEOUT = 3 +UDP_POLL_INTERVAL = 0.10 #in seconds + +USRP2_FW_PROTO_VERSION = 7 #should be unused after r6 + +#from bootloader_utils.h + +FPGA_IMAGE_SIZE_BYTES = 1572864 +FW_IMAGE_SIZE_BYTES = 31744 +SAFE_FPGA_IMAGE_LOCATION_ADDR = 0x00000000 +SAFE_FW_IMAGE_LOCATION_ADDR = 0x003F0000 +PROD_FPGA_IMAGE_LOCATION_ADDR = 0x00180000 +PROD_FW_IMAGE_LOCATION_ADDR = 0x00300000 + +FLASH_DATA_PACKET_SIZE = 256 + +#see fw_common.h +FLASH_ARGS_FMT = '!LLLLL256s' +FLASH_INFO_FMT = '!LLLLL256x' +FLASH_IP_FMT = '!LLLL260x' + +class update_id_t: + USRP2_FW_UPDATE_ID_WAT = ord(' ') + USRP2_FW_UPDATE_ID_OHAI_LOL = ord('a') + USRP2_FW_UPDATE_ID_OHAI_OMG = ord('A') + USRP2_FW_UPDATE_ID_WATS_TEH_FLASH_INFO_LOL = ord('f') + USRP2_FW_UPDATE_ID_HERES_TEH_FLASH_INFO_OMG = ord('F') + USRP2_FW_UPDATE_ID_ERASE_TEH_FLASHES_LOL = ord('e') + USRP2_FW_UPDATE_ID_ERASING_TEH_FLASHES_OMG = ord('E') + USRP2_FW_UPDATE_ID_R_U_DONE_ERASING_LOL = ord('d') + USRP2_FW_UPDATE_ID_IM_DONE_ERASING_OMG = ord('D') + USRP2_FW_UPDATE_ID_NOPE_NOT_DONE_ERASING_OMG = ord('B') + USRP2_FW_UPDATE_ID_WRITE_TEH_FLASHES_LOL = ord('w') + USRP2_FW_UPDATE_ID_WROTE_TEH_FLASHES_OMG = ord('W') + USRP2_FW_UPDATE_ID_READ_TEH_FLASHES_LOL = ord('r') + USRP2_FW_UPDATE_ID_KK_READ_TEH_FLASHES_OMG = ord('R') + USRP2_FW_UPDATE_ID_RESET_MAH_COMPUTORZ_LOL = ord('s') + USRP2_FW_UPDATE_ID_RESETTIN_TEH_COMPUTORZ_OMG = ord('S') + USRP2_FW_UPDATE_ID_KTHXBAI = ord('~') + +_seq = -1 +def seq(): + global _seq + _seq = _seq+1 + return _seq + +######################################################################## +# helper functions +######################################################################## +def unpack_flash_args_fmt(s): + return struct.unpack(FLASH_ARGS_FMT, s) #(proto_ver, pktid, seq, flash_addr, length, data) + +def unpack_flash_info_fmt(s): + return struct.unpack(FLASH_INFO_FMT, s) #(proto_ver, pktid, seq, sector_size_bytes, memory_size_bytes) + +def unpack_flash_ip_fmt(s): + return struct.unpack(FLASH_IP_FMT, s) #(proto_ver, pktid, seq, ip_addr) + +def pack_flash_args_fmt(proto_ver, pktid, seq, flash_addr, length, data): + return struct.pack(FLASH_ARGS_FMT, proto_ver, pktid, seq, flash_addr, length, data) + +def pack_flash_info_fmt(proto_ver, pktid, seq, sector_size_bytes, memory_size_bytes): + return struct.pack(FLASH_INFO_FMT, proto_ver, pktid, seq, sector_size_bytes, memory_size_bytes) + +def is_valid_fpga_image(fpga_image): + for i in range(0,63): + if ord(fpga_image[i]) == 0xFF: + continue + if ord(fpga_image[i]) == 0xAA and ord(fpga_image[i+1]) == 0x99: + return 1 + + return 0 + +def is_valid_fw_image(fw_image): + for i in range(0,4): + if ord(fw_image[i]) != 0x0B: + return 0; + + return 1 + +######################################################################## +# Burner class, holds a socket and send/recv routines +######################################################################## +class burner_socket(object): + def __init__(self, ip): + self._sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) + self._sock.settimeout(UDP_TIMEOUT) + self._sock.connect((ip, UDP_FW_UPDATE_PORT)) + + def send_and_recv(self, pkt): + try: self._sock.send(pkt) + except Exception, e: + print e + sys.exit(1) + + try: recv_pkt = self._sock.recv(UDP_MAX_XFER_BYTES) + except Exception, e: + print e + sys.exit(1) + + return recv_pkt + + #just here to validate comms + def init_update(self): + out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_OHAI_LOL, seq(), 0, 0, "") + in_pkt = self.send_and_recv(out_pkt) + (proto_ver, pktid, rxseq, ip_addr) = unpack_flash_ip_fmt(in_pkt) + if pktid == update_id_t.USRP2_FW_UPDATE_ID_OHAI_OMG: + print "USRP2P found." + else: + raise Exception, "Invalid reply received from device." + + # print "Incoming:\n\tVer: %i\n\tID: %c\n\tSeq: %i\n\tIP: %i\n" % (proto_ver, chr(pktid), rxseq, ip_addr) + + def get_flash_info(self): + out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_WATS_TEH_FLASH_INFO_LOL, seq(), 0, 0, "") + in_pkt = self.send_and_recv(out_pkt) + + (proto_ver, pktid, rxseq, sector_size_bytes, memory_size_bytes) = unpack_flash_info_fmt(in_pkt) + + if pktid != update_id_t.USRP2_FW_UPDATE_ID_HERES_TEH_FLASH_INFO_OMG: + raise Exception, "Invalid reply %c from device." % (chr(pktid)) + + return (memory_size_bytes, sector_size_bytes) + + def burn_fw(self, fw, fpga, reset, safe): + (flash_size, sector_size) = self.get_flash_info() + + print "Flash size: %i\nSector size: %i\n\n" % (flash_size, sector_size) + + if fpga: + if safe: image_location = SAFE_FPGA_IMAGE_LOCATION_ADDR + else: image_location = PROD_FPGA_IMAGE_LOCATION_ADDR + + fpga_file = open(fpga, 'rb') + fpga_image = fpga_file.read() + + if len(fpga_image) > FPGA_IMAGE_SIZE_BYTES: + print "Error: FPGA image file too large." + return 0 + + if not is_valid_fpga_image(fpga_image): + print "Error: Invalid FPGA image file." + return 0 + + print "Begin FPGA write: this should take about 1 minute..." + start_time = time.time() + self.erase_image(image_location, FPGA_IMAGE_SIZE_BYTES) + self.write_image(fpga_image, image_location) + self.verify_image(fpga_image, image_location) + print "Time elapsed: %f seconds"%(time.time() - start_time) + print "\n\n" + + if fw: + if safe: image_location = SAFE_FW_IMAGE_LOCATION_ADDR + else: image_location = PROD_FW_IMAGE_LOCATION_ADDR + + fw_file = open(fw, 'rb') + fw_image = fw_file.read() + + if len(fw_image) > FW_IMAGE_SIZE_BYTES: + print "Error: Firmware image file too large." + return 0 + + if not is_valid_fw_image(fw_image): + print "Error: Invalid firmware image file." + return 0 + + print "Begin firmware write: this should take about 1 second..." + start_time = time.time() + self.erase_image(image_location, FW_IMAGE_SIZE_BYTES) + self.write_image(fw_image, image_location) + self.verify_image(fw_image, image_location) + print "Time elapsed: %f seconds"%(time.time() - start_time) + print "\n\n" + + if reset: self.reset_usrp() + + def write_image(self, image, addr): + print "Writing image" + #we split the image into smaller (256B) bits and send them down the wire + while image: + out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_WRITE_TEH_FLASHES_LOL, seq(), addr, FLASH_DATA_PACKET_SIZE, image[:FLASH_DATA_PACKET_SIZE]) + in_pkt = self.send_and_recv(out_pkt) + + (proto_ver, pktid, rxseq, flash_addr, rxlength, data) = unpack_flash_args_fmt(in_pkt) + + if pktid != update_id_t.USRP2_FW_UPDATE_ID_WROTE_TEH_FLASHES_OMG: + raise Exception, "Invalid reply %c from device." % (chr(pktid)) + + image = image[FLASH_DATA_PACKET_SIZE:] + addr += FLASH_DATA_PACKET_SIZE + + def verify_image(self, image, addr): + print "Verifying data" + readsize = len(image) + readdata = str() + while readsize > 0: + if readsize < FLASH_DATA_PACKET_SIZE: thisreadsize = readsize + else: thisreadsize = FLASH_DATA_PACKET_SIZE + out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_READ_TEH_FLASHES_LOL, seq(), addr, thisreadsize, "") + in_pkt = self.send_and_recv(out_pkt) + + (proto_ver, pktid, rxseq, flash_addr, rxlength, data) = unpack_flash_args_fmt(in_pkt) + + if pktid != update_id_t.USRP2_FW_UPDATE_ID_KK_READ_TEH_FLASHES_OMG: + raise Exception, "Invalid reply %c from device." % (chr(pktid)) + + readdata += data[:thisreadsize] + readsize -= FLASH_DATA_PACKET_SIZE + addr += FLASH_DATA_PACKET_SIZE + + print "Read back %i bytes" % len(readdata) + # print readdata + + # for i in range(256, 512): + # print "out: %i in: %i" % (ord(image[i]), ord(readdata[i])) + + if readdata != image: + print "Verify failed. Image did not write correctly." + else: + print "Success." + + def read_image(self, image, size, addr): + print "Reading image" + readsize = size + readdata = str() + while readsize > 0: + if readsize < FLASH_DATA_PACKET_SIZE: thisreadsize = readsize + else: thisreadsize = FLASH_DATA_PACKET_SIZE + out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_READ_TEH_FLASHES_LOL, seq(), addr, thisreadsize, "") + in_pkt = self.send_and_recv(out_pkt) + + (proto_ver, pktid, rxseq, flash_addr, rxlength, data) = unpack_flash_args_fmt(in_pkt) + + if pktid != update_id_t.USRP2_FW_UPDATE_ID_KK_READ_TEH_FLASHES_OMG: + raise Exception, "Invalid reply %c from device." % (chr(pktid)) + + readdata += data[:thisreadsize] + readsize -= FLASH_DATA_PACKET_SIZE + addr += FLASH_DATA_PACKET_SIZE + + print "Read back %i bytes" % len(readdata) + + #write to disk + f = open(image, 'w') + f.write(readdata) + f.close() + + def reset_usrp(self): + out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_RESET_MAH_COMPUTORZ_LOL, seq(), 0, 0, "") + in_pkt = self.send_and_recv(out_pkt) + + (proto_ver, pktid, rxseq, flash_addr, rxlength, data) = unpack_flash_args_fmt(in_pkt) + if pktid == update_id_t.USRP2_FW_UPDATE_ID_RESETTIN_TEH_COMPUTORZ_OMG: + raise Exception, "Device failed to reset." + + def erase_image(self, addr, length): + #get flash info first + out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_ERASE_TEH_FLASHES_LOL, seq(), addr, length, "") + in_pkt = self.send_and_recv(out_pkt) + + (proto_ver, pktid, rxseq, flash_addr, rxlength, data) = unpack_flash_args_fmt(in_pkt) + + if pktid != update_id_t.USRP2_FW_UPDATE_ID_ERASING_TEH_FLASHES_OMG: + raise Exception, "Invalid reply %c from device." % (chr(pktid)) + + print "Erasing %i bytes at %i" % (length, addr) + + #now wait for it to finish + while(True): + out_pkt = pack_flash_args_fmt(USRP2_FW_PROTO_VERSION, update_id_t.USRP2_FW_UPDATE_ID_R_U_DONE_ERASING_LOL, seq(), 0, 0, "") + in_pkt = self.send_and_recv(out_pkt) + + (proto_ver, pktid, rxseq, flash_addr, rxlength, data) = unpack_flash_args_fmt(in_pkt) + + if pktid == update_id_t.USRP2_FW_UPDATE_ID_IM_DONE_ERASING_OMG: break + elif pktid != update_id_t.USRP2_FW_UPDATE_ID_NOPE_NOT_DONE_ERASING_OMG: + raise Exception, "Invalid reply %c from device." % (chr(pktid)) + + +######################################################################## +# command line options +######################################################################## +def get_options(): + parser = optparse.OptionParser() + parser.add_option("--ip", type="string", help="USRP2P firmware address", default='') + parser.add_option("--fw", type="string", help="firmware image path (optional)", default='') + parser.add_option("--fpga", type="string", help="fpga image path (optional)", default='') + parser.add_option("--reset", action="store_true", help="reset the device after writing", default=False) + parser.add_option("--read", action="store_true", help="read to file instead of write from file", default=False) + parser.add_option("--overwrite-safe", action="store_true", help="never ever use this option", default=False) + (options, args) = parser.parse_args() + + return options + +######################################################################## +# main +######################################################################## +if __name__=='__main__': + options = get_options() + if not options.ip: raise Exception, 'no ip address specified' + + if not options.fpga and not options.fw and not options.reset: raise Exception, 'Must specify either a firmware image or FPGA image, and/or reset.' + + if options.overwrite_safe and not options.read: + print("Are you REALLY, REALLY sure you want to overwrite the safe image? This is ALMOST ALWAYS a terrible idea.") + print("If your image is faulty, your USRP2+ will become a brick until reprogrammed via JTAG.") + response = raw_input("""Type "yes" to continue, or anything else to quit: """) + if response != "yes": sys.exit(0) + + burner = burner_socket(ip=options.ip) + + if options.read: + if options.fw: + file = options.fw + if os.path.isfile(file): + response = raw_input("File already exists -- overwrite? (y/n) ") + if response != "y": sys.exit(0) + size = FW_IMAGE_SIZE_BYTES + addr = SAFE_FW_IMAGE_LOCATION_ADDR if options.overwrite_safe else PROD_FW_IMAGE_LOCATION_ADDR + burner.read_image(file, size, addr) + + if options.fpga: + file = options.fpga + if os.path.isfile(file): + response = raw_input("File already exists -- overwrite? (y/n) ") + if response != "y": sys.exit(0) + size = FPGA_IMAGE_SIZE_BYTES + addr = SAFE_FPGA_IMAGE_LOCATION_ADDR if options.overwrite_safe else PROD_FPGA_IMAGE_LOCATION_ADDR + burner.read_image(file, size, addr) + + else: burner.burn_fw(fw=options.fw, fpga=options.fpga, reset=options.reset, safe=options.overwrite_safe) |