diff options
Diffstat (limited to 'host')
67 files changed, 3328 insertions, 966 deletions
diff --git a/host/CMakeLists.txt b/host/CMakeLists.txt index 7f7d58658..90fe2b56b 100644 --- a/host/CMakeLists.txt +++ b/host/CMakeLists.txt @@ -269,8 +269,8 @@ UHD_INSTALL(FILES #{{{IMG_SECTION # This section is written automatically by /images/create_imgs_package.py # Any manual changes in here will be overwritten. -SET(UHD_IMAGES_MD5SUM "2ff397927220f591f377a04c9e9e8b7e") -SET(UHD_IMAGES_DOWNLOAD_SRC "uhd-images_003.009.001-release.zip") +SET(UHD_IMAGES_MD5SUM "0529c77990ddae70fd8edba5afdf04b0") +SET(UHD_IMAGES_DOWNLOAD_SRC "uhd-images_003.010.git-53-gb48fe5bb.zip") #}}} ######################################################################## diff --git a/host/cmake/Modules/UHDVersion.cmake b/host/cmake/Modules/UHDVersion.cmake index 93687a334..696817a96 100644 --- a/host/cmake/Modules/UHDVersion.cmake +++ b/host/cmake/Modules/UHDVersion.cmake @@ -27,9 +27,9 @@ FIND_PACKAGE(Git QUIET) # - set UHD_VERSION_DEVEL to true for master and development branches ######################################################################## SET(UHD_VERSION_MAJOR 003) -SET(UHD_VERSION_MINOR 009) -SET(UHD_VERSION_PATCH 001) -SET(UHD_VERSION_DEVEL FALSE) +SET(UHD_VERSION_MINOR 010) +SET(UHD_VERSION_PATCH git) +SET(UHD_VERSION_DEVEL TRUE) ######################################################################## # Set up trimmed version numbers for DLL resource files and packages diff --git a/host/cmake/msvc/inttypes.h b/host/cmake/msvc/inttypes.h deleted file mode 100644 index 1c2baa82e..000000000 --- a/host/cmake/msvc/inttypes.h +++ /dev/null @@ -1,301 +0,0 @@ -// ISO C9x compliant inttypes.h for Microsoft Visual Studio -// Based on ISO/IEC 9899:TC2 Committee draft (May 6, 2005) WG14/N1124 -// -// Copyright (c) 2006 Alexander Chemeris -// -// Redistribution and use in source and binary forms, with or without -// modification, are permitted provided that the following conditions are met: -// -// 1. Redistributions of source code must retain the above copyright notice, -// this list of conditions and the following disclaimer. -// -// 2. Redistributions in binary form must reproduce the above copyright -// notice, this list of conditions and the following disclaimer in the -// documentation and/or other materials provided with the distribution. -// -// 3. The name of the author may be used to endorse or promote products -// derived from this software without specific prior written permission. -// -// THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED -// WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -// EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -// OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -// WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -// OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -// -/////////////////////////////////////////////////////////////////////////////// - -#ifndef _MSC_VER // [ -#error "Use this header only with Microsoft Visual C++ compilers!" -#endif // _MSC_VER ] - -#ifndef _MSC_INTTYPES_H_ // [ -#define _MSC_INTTYPES_H_ - -#if _MSC_VER > 1000 -#pragma once -#endif - -#include <stdint.h> - -// 7.8 Format conversion of integer types - -typedef struct { - intmax_t quot; - intmax_t rem; -} imaxdiv_t; - -// 7.8.1 Macros for format specifiers - -// The fprintf macros for signed integers are: -#define PRId8 "d" -#define PRIi8 "i" -#define PRIdLEAST8 "d" -#define PRIiLEAST8 "i" -#define PRIdFAST8 "d" -#define PRIiFAST8 "i" - -#define PRId16 "hd" -#define PRIi16 "hi" -#define PRIdLEAST16 "hd" -#define PRIiLEAST16 "hi" -#define PRIdFAST16 "hd" -#define PRIiFAST16 "hi" - -#define PRId32 "I32d" -#define PRIi32 "I32i" -#define PRIdLEAST32 "I32d" -#define PRIiLEAST32 "I32i" -#define PRIdFAST32 "I32d" -#define PRIiFAST32 "I32i" - -#define PRId64 "I64d" -#define PRIi64 "I64i" -#define PRIdLEAST64 "I64d" -#define PRIiLEAST64 "I64i" -#define PRIdFAST64 "I64d" -#define PRIiFAST64 "I64i" - -#define PRIdMAX "I64d" -#define PRIiMAX "I64i" - -#define PRIdPTR "Id" -#define PRIiPTR "Ii" - -// The fprintf macros for unsigned integers are: -#define PRIo8 "o" -#define PRIu8 "u" -#define PRIx8 "x" -#define PRIX8 "X" -#define PRIoLEAST8 "o" -#define PRIuLEAST8 "u" -#define PRIxLEAST8 "x" -#define PRIXLEAST8 "X" -#define PRIoFAST8 "o" -#define PRIuFAST8 "u" -#define PRIxFAST8 "x" -#define PRIXFAST8 "X" - -#define PRIo16 "ho" -#define PRIu16 "hu" -#define PRIx16 "hx" -#define PRIX16 "hX" -#define PRIoLEAST16 "ho" -#define PRIuLEAST16 "hu" -#define PRIxLEAST16 "hx" -#define PRIXLEAST16 "hX" -#define PRIoFAST16 "ho" -#define PRIuFAST16 "hu" -#define PRIxFAST16 "hx" -#define PRIXFAST16 "hX" - -#define PRIo32 "I32o" -#define PRIu32 "I32u" -#define PRIx32 "I32x" -#define PRIX32 "I32X" -#define PRIoLEAST32 "I32o" -#define PRIuLEAST32 "I32u" -#define PRIxLEAST32 "I32x" -#define PRIXLEAST32 "I32X" -#define PRIoFAST32 "I32o" -#define PRIuFAST32 "I32u" -#define PRIxFAST32 "I32x" -#define PRIXFAST32 "I32X" - -#define PRIo64 "I64o" -#define PRIu64 "I64u" -#define PRIx64 "I64x" -#define PRIX64 "I64X" -#define PRIoLEAST64 "I64o" -#define PRIuLEAST64 "I64u" -#define PRIxLEAST64 "I64x" -#define PRIXLEAST64 "I64X" -#define PRIoFAST64 "I64o" -#define PRIuFAST64 "I64u" -#define PRIxFAST64 "I64x" -#define PRIXFAST64 "I64X" - -#define PRIoMAX "I64o" -#define PRIuMAX "I64u" -#define PRIxMAX "I64x" -#define PRIXMAX "I64X" - -#define PRIoPTR "Io" -#define PRIuPTR "Iu" -#define PRIxPTR "Ix" -#define PRIXPTR "IX" - -// The fscanf macros for signed integers are: -#define SCNd8 "d" -#define SCNi8 "i" -#define SCNdLEAST8 "d" -#define SCNiLEAST8 "i" -#define SCNdFAST8 "d" -#define SCNiFAST8 "i" - -#define SCNd16 "hd" -#define SCNi16 "hi" -#define SCNdLEAST16 "hd" -#define SCNiLEAST16 "hi" -#define SCNdFAST16 "hd" -#define SCNiFAST16 "hi" - -#define SCNd32 "ld" -#define SCNi32 "li" -#define SCNdLEAST32 "ld" -#define SCNiLEAST32 "li" -#define SCNdFAST32 "ld" -#define SCNiFAST32 "li" - -#define SCNd64 "I64d" -#define SCNi64 "I64i" -#define SCNdLEAST64 "I64d" -#define SCNiLEAST64 "I64i" -#define SCNdFAST64 "I64d" -#define SCNiFAST64 "I64i" - -#define SCNdMAX "I64d" -#define SCNiMAX "I64i" - -#ifdef _WIN64 // [ -# define SCNdPTR "I64d" -# define SCNiPTR "I64i" -#else // _WIN64 ][ -# define SCNdPTR "ld" -# define SCNiPTR "li" -#endif // _WIN64 ] - -// The fscanf macros for unsigned integers are: -#define SCNo8 "o" -#define SCNu8 "u" -#define SCNx8 "x" -#define SCNX8 "X" -#define SCNoLEAST8 "o" -#define SCNuLEAST8 "u" -#define SCNxLEAST8 "x" -#define SCNXLEAST8 "X" -#define SCNoFAST8 "o" -#define SCNuFAST8 "u" -#define SCNxFAST8 "x" -#define SCNXFAST8 "X" - -#define SCNo16 "ho" -#define SCNu16 "hu" -#define SCNx16 "hx" -#define SCNX16 "hX" -#define SCNoLEAST16 "ho" -#define SCNuLEAST16 "hu" -#define SCNxLEAST16 "hx" -#define SCNXLEAST16 "hX" -#define SCNoFAST16 "ho" -#define SCNuFAST16 "hu" -#define SCNxFAST16 "hx" -#define SCNXFAST16 "hX" - -#define SCNo32 "lo" -#define SCNu32 "lu" -#define SCNx32 "lx" -#define SCNX32 "lX" -#define SCNoLEAST32 "lo" -#define SCNuLEAST32 "lu" -#define SCNxLEAST32 "lx" -#define SCNXLEAST32 "lX" -#define SCNoFAST32 "lo" -#define SCNuFAST32 "lu" -#define SCNxFAST32 "lx" -#define SCNXFAST32 "lX" - -#define SCNo64 "I64o" -#define SCNu64 "I64u" -#define SCNx64 "I64x" -#define SCNX64 "I64X" -#define SCNoLEAST64 "I64o" -#define SCNuLEAST64 "I64u" -#define SCNxLEAST64 "I64x" -#define SCNXLEAST64 "I64X" -#define SCNoFAST64 "I64o" -#define SCNuFAST64 "I64u" -#define SCNxFAST64 "I64x" -#define SCNXFAST64 "I64X" - -#define SCNoMAX "I64o" -#define SCNuMAX "I64u" -#define SCNxMAX "I64x" -#define SCNXMAX "I64X" - -#ifdef _WIN64 // [ -# define SCNoPTR "I64o" -# define SCNuPTR "I64u" -# define SCNxPTR "I64x" -# define SCNXPTR "I64X" -#else // _WIN64 ][ -# define SCNoPTR "lo" -# define SCNuPTR "lu" -# define SCNxPTR "lx" -# define SCNXPTR "lX" -#endif // _WIN64 ] - -// 7.8.2 Functions for greatest-width integer types - -// 7.8.2.1 The imaxabs function -#define imaxabs _abs64 - -// 7.8.2.2 The imaxdiv function - -// This is modified version of div() function from Microsoft's div.c found -// in %MSVC.NET%\crt\src\div.c -#ifdef STATIC_IMAXDIV // [ -static -#else // STATIC_IMAXDIV ][ -_inline -#endif // STATIC_IMAXDIV ] -imaxdiv_t __cdecl imaxdiv(intmax_t numer, intmax_t denom) -{ - imaxdiv_t result; - - result.quot = numer / denom; - result.rem = numer % denom; - - if (numer < 0 && result.rem > 0) { - // did division wrong; must fix up - ++result.quot; - result.rem -= denom; - } - - return result; -} - -// 7.8.2.3 The strtoimax and strtoumax functions -#define strtoimax _strtoi64 -#define strtoumax _strtoui64 - -// 7.8.2.4 The wcstoimax and wcstoumax functions -#define wcstoimax _wcstoi64 -#define wcstoumax _wcstoui64 - - -#endif // _MSC_INTTYPES_H_ ] diff --git a/host/cmake/msvc/stdint.h b/host/cmake/msvc/stdint.h deleted file mode 100644 index 15333b467..000000000 --- a/host/cmake/msvc/stdint.h +++ /dev/null @@ -1,226 +0,0 @@ -// ISO C9x compliant stdint.h for Microsoft Visual Studio -// Based on ISO/IEC 9899:TC2 Committee draft (May 6, 2005) WG14/N1124 -// -// Copyright (c) 2006 Alexander Chemeris -// -// Redistribution and use in source and binary forms, with or without -// modification, are permitted provided that the following conditions are met: -// -// 1. Redistributions of source code must retain the above copyright notice, -// this list of conditions and the following disclaimer. -// -// 2. Redistributions in binary form must reproduce the above copyright -// notice, this list of conditions and the following disclaimer in the -// documentation and/or other materials provided with the distribution. -// -// 3. The name of the author may be used to endorse or promote products -// derived from this software without specific prior written permission. -// -// THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED -// WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -// EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -// OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -// WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -// OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -// -/////////////////////////////////////////////////////////////////////////////// - -#ifndef _MSC_VER // [ -#error "Use this header only with Microsoft Visual C++ compilers!" -#endif // _MSC_VER ] - -#ifndef _MSC_STDINT_H_ // [ -#define _MSC_STDINT_H_ - -#if _MSC_VER > 1000 -#pragma once -#endif - -#include <limits.h> - -// For Visual Studio 6 in C++ mode wrap <wchar.h> include with 'extern "C++" {}' -// or compiler give many errors like this: -// error C2733: second C linkage of overloaded function 'wmemchr' not allowed -#if (_MSC_VER < 1300) && defined(__cplusplus) - extern "C++" { -#endif -# include <wchar.h> -#if (_MSC_VER < 1300) && defined(__cplusplus) - } -#endif - -// 7.18.1 Integer types - -// 7.18.1.1 Exact-width integer types -typedef __int8 int8_t; -typedef __int16 int16_t; -typedef __int32 int32_t; -typedef __int64 int64_t; -typedef unsigned __int8 uint8_t; -typedef unsigned __int16 uint16_t; -typedef unsigned __int32 uint32_t; -typedef unsigned __int64 uint64_t; - -// 7.18.1.2 Minimum-width integer types -typedef int8_t int_least8_t; -typedef int16_t int_least16_t; -typedef int32_t int_least32_t; -typedef int64_t int_least64_t; -typedef uint8_t uint_least8_t; -typedef uint16_t uint_least16_t; -typedef uint32_t uint_least32_t; -typedef uint64_t uint_least64_t; - -// 7.18.1.3 Fastest minimum-width integer types -typedef int8_t int_fast8_t; -typedef int16_t int_fast16_t; -typedef int32_t int_fast32_t; -typedef int64_t int_fast64_t; -typedef uint8_t uint_fast8_t; -typedef uint16_t uint_fast16_t; -typedef uint32_t uint_fast32_t; -typedef uint64_t uint_fast64_t; - -// 7.18.1.4 Integer types capable of holding object pointers -#ifdef _WIN64 // [ - typedef __int64 intptr_t; - typedef unsigned __int64 uintptr_t; -#else // _WIN64 ][ - typedef int intptr_t; - typedef unsigned int uintptr_t; -#endif // _WIN64 ] - -// 7.18.1.5 Greatest-width integer types -typedef int64_t intmax_t; -typedef uint64_t uintmax_t; - - -// 7.18.2 Limits of specified-width integer types - -#if !defined(__cplusplus) || defined(__STDC_LIMIT_MACROS) // [ See footnote 220 at page 257 and footnote 221 at page 259 - -// 7.18.2.1 Limits of exact-width integer types -#define INT8_MIN ((int8_t)_I8_MIN) -#define INT8_MAX _I8_MAX -#define INT16_MIN ((int16_t)_I16_MIN) -#define INT16_MAX _I16_MAX -#define INT32_MIN ((int32_t)_I32_MIN) -#define INT32_MAX _I32_MAX -#define INT64_MIN ((int64_t)_I64_MIN) -#define INT64_MAX _I64_MAX -#define UINT8_MAX _UI8_MAX -#define UINT16_MAX _UI16_MAX -#define UINT32_MAX _UI32_MAX -#define UINT64_MAX _UI64_MAX - -// 7.18.2.2 Limits of minimum-width integer types -#define INT_LEAST8_MIN INT8_MIN -#define INT_LEAST8_MAX INT8_MAX -#define INT_LEAST16_MIN INT16_MIN -#define INT_LEAST16_MAX INT16_MAX -#define INT_LEAST32_MIN INT32_MIN -#define INT_LEAST32_MAX INT32_MAX -#define INT_LEAST64_MIN INT64_MIN -#define INT_LEAST64_MAX INT64_MAX -#define UINT_LEAST8_MAX UINT8_MAX -#define UINT_LEAST16_MAX UINT16_MAX -#define UINT_LEAST32_MAX UINT32_MAX -#define UINT_LEAST64_MAX UINT64_MAX - -// 7.18.2.3 Limits of fastest minimum-width integer types -#define INT_FAST8_MIN INT8_MIN -#define INT_FAST8_MAX INT8_MAX -#define INT_FAST16_MIN INT16_MIN -#define INT_FAST16_MAX INT16_MAX -#define INT_FAST32_MIN INT32_MIN -#define INT_FAST32_MAX INT32_MAX -#define INT_FAST64_MIN INT64_MIN -#define INT_FAST64_MAX INT64_MAX -#define UINT_FAST8_MAX UINT8_MAX -#define UINT_FAST16_MAX UINT16_MAX -#define UINT_FAST32_MAX UINT32_MAX -#define UINT_FAST64_MAX UINT64_MAX - -// 7.18.2.4 Limits of integer types capable of holding object pointers -#ifdef _WIN64 // [ -# define INTPTR_MIN INT64_MIN -# define INTPTR_MAX INT64_MAX -# define UINTPTR_MAX UINT64_MAX -#else // _WIN64 ][ -# define INTPTR_MIN INT32_MIN -# define INTPTR_MAX INT32_MAX -# define UINTPTR_MAX UINT32_MAX -#endif // _WIN64 ] - -// 7.18.2.5 Limits of greatest-width integer types -#define INTMAX_MIN INT64_MIN -#define INTMAX_MAX INT64_MAX -#define UINTMAX_MAX UINT64_MAX - -// 7.18.3 Limits of other integer types - -#ifdef _WIN64 // [ -# define PTRDIFF_MIN _I64_MIN -# define PTRDIFF_MAX _I64_MAX -#else // _WIN64 ][ -# define PTRDIFF_MIN _I32_MIN -# define PTRDIFF_MAX _I32_MAX -#endif // _WIN64 ] - -#define SIG_ATOMIC_MIN INT_MIN -#define SIG_ATOMIC_MAX INT_MAX - -#ifndef SIZE_MAX // [ -# ifdef _WIN64 // [ -# define SIZE_MAX _UI64_MAX -# else // _WIN64 ][ -# define SIZE_MAX _UI32_MAX -# endif // _WIN64 ] -#endif // SIZE_MAX ] - -// WCHAR_MIN and WCHAR_MAX are also defined in <wchar.h> -#ifndef WCHAR_MIN // [ -# define WCHAR_MIN 0 -#endif // WCHAR_MIN ] -#ifndef WCHAR_MAX // [ -# define WCHAR_MAX _UI16_MAX -#endif // WCHAR_MAX ] - -#define WINT_MIN 0 -#define WINT_MAX _UI16_MAX - -#endif // __STDC_LIMIT_MACROS ] - - -// 7.18.4 Limits of other integer types - -#if !defined(__cplusplus) || defined(__STDC_CONSTANT_MACROS) // [ See footnote 224 at page 260 - -// 7.18.4.1 Macros for minimum-width integer constants - -#define INT8_C(val) val##i8 -#define INT16_C(val) val##i16 -#define INT32_C(val) val##i32 -#define INT64_C(val) val##i64 - -#define UINT8_C(val) val##ui8 -#define UINT16_C(val) val##ui16 -#define UINT32_C(val) val##ui32 -#define UINT64_C(val) val##ui64 - -// 7.18.4.2 Macros for greatest-width integer constants -#ifndef INTMAX_C -#define INTMAX_C INT64_C -#endif -#ifndef UINTMAX_C -#define UINTMAX_C UINT64_C -#endif - -#endif // __STDC_CONSTANT_MACROS ] - - -#endif // _MSC_STDINT_H_ ] diff --git a/host/include/uhd/types/CMakeLists.txt b/host/include/uhd/types/CMakeLists.txt index 3f34782e2..3af395eeb 100644 --- a/host/include/uhd/types/CMakeLists.txt +++ b/host/include/uhd/types/CMakeLists.txt @@ -33,6 +33,7 @@ UHD_INSTALL(FILES sensors.hpp serial.hpp sid.hpp + stdint.hpp stream_cmd.hpp time_spec.hpp tune_request.hpp diff --git a/host/include/uhd/types/stdint.hpp b/host/include/uhd/types/stdint.hpp new file mode 100644 index 000000000..cccb6b157 --- /dev/null +++ b/host/include/uhd/types/stdint.hpp @@ -0,0 +1,53 @@ +// +// Copyright 2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_TYPES_STDINT_HPP +#define INCLUDED_UHD_TYPES_STDINT_HPP + +#include <boost/cstdint.hpp> + +using boost::int8_t; +using boost::uint8_t; +using boost::int16_t; +using boost::uint16_t; +using boost::int32_t; +using boost::uint32_t; +using boost::int64_t; +using boost::uint64_t; + +using boost::int_least8_t; +using boost::uint_least8_t; +using boost::int_least16_t; +using boost::uint_least16_t; +using boost::int_least32_t; +using boost::uint_least32_t; +using boost::int_least64_t; +using boost::uint_least64_t; + +using boost::int_fast8_t; +using boost::uint_fast8_t; +using boost::int_fast16_t; +using boost::uint_fast16_t; +using boost::int_fast32_t; +using boost::uint_fast32_t; +using boost::int_fast64_t; +using boost::uint_fast64_t; + +using boost::intptr_t; +using boost::uintptr_t; + +#endif /* INCLUDED_UHD_TYPES_STDINT_HPP */ diff --git a/host/include/uhd/usrp/CMakeLists.txt b/host/include/uhd/usrp/CMakeLists.txt index e974f808d..2d3717357 100644 --- a/host/include/uhd/usrp/CMakeLists.txt +++ b/host/include/uhd/usrp/CMakeLists.txt @@ -26,6 +26,7 @@ UHD_INSTALL(FILES ### utilities ### gps_ctrl.hpp + gpio_defs.hpp mboard_eeprom.hpp subdev_spec.hpp diff --git a/host/include/uhd/usrp/dboard_iface.hpp b/host/include/uhd/usrp/dboard_iface.hpp index f8f318a40..c3a3a4e00 100644 --- a/host/include/uhd/usrp/dboard_iface.hpp +++ b/host/include/uhd/usrp/dboard_iface.hpp @@ -22,6 +22,7 @@ #include <uhd/utils/pimpl.hpp> #include <uhd/types/serial.hpp> #include <uhd/types/time_spec.hpp> +#include <uhd/usrp/gpio_defs.hpp> #include <boost/shared_ptr.hpp> #include <boost/cstdint.hpp> #include <string> @@ -67,14 +68,6 @@ public: UNIT_TX = int('t') }; - //! possible atr registers - enum atr_reg_t{ - ATR_REG_IDLE = int('i'), - ATR_REG_TX_ONLY = int('t'), - ATR_REG_RX_ONLY = int('r'), - ATR_REG_FULL_DUPLEX = int('f') - }; - //! aux dac selection enums (per unit) enum aux_dac_t{ AUX_DAC_A = int('a'), @@ -89,6 +82,8 @@ public: AUX_ADC_B = int('b') }; + typedef uhd::usrp::gpio_atr::gpio_atr_reg_t atr_reg_t; + /*! * Get special properties information for this dboard slot. * This call helps the dboard code to handle implementation diff --git a/host/include/uhd/usrp/gpio_defs.hpp b/host/include/uhd/usrp/gpio_defs.hpp new file mode 100644 index 000000000..c32f22f28 --- /dev/null +++ b/host/include/uhd/usrp/gpio_defs.hpp @@ -0,0 +1,70 @@ +// +// Copyright 2011,2014,2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_LIBUHD_USRP_GPIO_DEFS_HPP +#define INCLUDED_LIBUHD_USRP_GPIO_DEFS_HPP + +#include <uhd/config.hpp> +#include <boost/assign.hpp> +#include <boost/utility.hpp> +#include <map> + +namespace uhd { namespace usrp { namespace gpio_atr { + +enum gpio_atr_reg_t { + ATR_REG_IDLE = int('i'), + ATR_REG_TX_ONLY = int('t'), + ATR_REG_RX_ONLY = int('r'), + ATR_REG_FULL_DUPLEX = int('f') +}; + +enum gpio_atr_mode_t { + MODE_ATR = 0, //Output driven by the auto-transmit-receive engine + MODE_GPIO = 1 //Output value is static +}; + +enum gpio_ddr_t { + DDR_INPUT = 0, + DDR_OUTPUT = 1 +}; + +enum gpio_attr_t { + GPIO_CTRL, + GPIO_DDR, + GPIO_OUT, + GPIO_ATR_0X, + GPIO_ATR_RX, + GPIO_ATR_TX, + GPIO_ATR_XX +}; + +typedef std::map<gpio_attr_t, std::string> gpio_attr_map_t; + +static const gpio_attr_map_t gpio_attr_map = + boost::assign::map_list_of + (GPIO_CTRL, "CTRL") + (GPIO_DDR, "DDR") + (GPIO_OUT, "OUT") + (GPIO_ATR_0X, "ATR_0X") + (GPIO_ATR_RX, "ATR_RX") + (GPIO_ATR_TX, "ATR_TX") + (GPIO_ATR_XX, "ATR_XX") +; + +}}} //namespaces + +#endif /* INCLUDED_LIBUHD_USRP_GPIO_DEFS_HPP */ diff --git a/host/include/uhd/utils/soft_register.hpp b/host/include/uhd/utils/soft_register.hpp index a2c34a4ec..665876e73 100644 --- a/host/include/uhd/utils/soft_register.hpp +++ b/host/include/uhd/utils/soft_register.hpp @@ -223,7 +223,7 @@ public: _soft_copy.mark_clean(); } } else { - throw uhd::not_implemented_error("soft_register is not writable."); + throw uhd::not_implemented_error("soft_register is not writable or uninitialized."); } } @@ -244,7 +244,7 @@ public: } _soft_copy.mark_clean(); } else { - throw uhd::not_implemented_error("soft_register is not readable."); + throw uhd::not_implemented_error("soft_register is not readable or uninitialized."); } } diff --git a/host/include/uhd/version.hpp.in b/host/include/uhd/version.hpp.in index e2c64812d..bfa0b904a 100644 --- a/host/include/uhd/version.hpp.in +++ b/host/include/uhd/version.hpp.in @@ -1,5 +1,5 @@ // -// Copyright 2010-2014 Ettus Research LLC +// Copyright 2010-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -27,7 +27,7 @@ * The format is oldest API compatible release - ABI compat number. * The compatibility number allows pre-release ABI to be versioned. */ -#define UHD_VERSION_ABI_STRING "3.9.0-0" +#define UHD_VERSION_ABI_STRING "3.10.0-0" /*! * A macro to check UHD version at compile-time. diff --git a/host/lib/convert/convert_item32.cpp b/host/lib/convert/convert_item32.cpp index 57bd64860..d52b47a1a 100644 --- a/host/lib/convert/convert_item32.cpp +++ b/host/lib/convert/convert_item32.cpp @@ -38,7 +38,10 @@ _DECLARE_ITEM32_CONVERTER(cpu_type, sc8) \ _DECLARE_ITEM32_CONVERTER(cpu_type, sc16) +/* Create sc16<->sc16,sc8(otw) */ DECLARE_ITEM32_CONVERTER(sc16) +/* Create fc32<->sc16,sc8(otw) */ DECLARE_ITEM32_CONVERTER(fc32) +/* Create fc64<->sc16,sc8(otw) */ DECLARE_ITEM32_CONVERTER(fc64) _DECLARE_ITEM32_CONVERTER(sc8, sc8) diff --git a/host/lib/convert/gen_convert_general.py b/host/lib/convert/gen_convert_general.py index 4f9eeb747..5c62d51df 100644 --- a/host/lib/convert/gen_convert_general.py +++ b/host/lib/convert/gen_convert_general.py @@ -39,30 +39,37 @@ DECLARE_CONVERTER(item32, 1, item32, 1, PRIORITY_GENERAL) { } """ -TMPL_CONV_GEN2_ITEM32 = """ -DECLARE_CONVERTER(item32, 1, sc16_item32_{end}, 1, PRIORITY_GENERAL) {{ +# Some 32-bit types converters are also defined in convert_item32.cpp to +# take care of quirks such as I/Q ordering on the wire etc. +TMPL_CONV_ITEM32 = """ +DECLARE_CONVERTER({in_type}, 1, {out_type}, 1, PRIORITY_GENERAL) {{ const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); for (size_t i = 0; i < nsamps; i++) {{ - output[i] = {to_wire}(input[i]); + output[i] = {to_wire_or_host}(input[i]); }} }} +""" -DECLARE_CONVERTER(sc16_item32_{end}, 1, item32, 1, PRIORITY_GENERAL) {{ +# 64-bit data types are two consecutive item32 items +TMPL_CONV_ITEM64 = """ +DECLARE_CONVERTER({in_type}, 1, {out_type}, 1, PRIORITY_GENERAL) {{ const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); - for (size_t i = 0; i < nsamps; i++) {{ - output[i] = {to_host}(input[i]); + // An item64 is two item32_t's + for (size_t i = 0; i < nsamps * 2; i++) {{ + output[i] = {to_wire_or_host}(input[i]); }} }} """ -TMPL_CONV_U8 = """ -DECLARE_CONVERTER(u8, 1, u8_item32_{end}, 1, PRIORITY_GENERAL) {{ - const boost::uint32_t *input = reinterpret_cast<const boost::uint32_t *>(inputs[0]); - boost::uint32_t *output = reinterpret_cast<boost::uint32_t *>(outputs[0]); + +TMPL_CONV_U8S8 = """ +DECLARE_CONVERTER({us8}, 1, {us8}_item32_{end}, 1, PRIORITY_GENERAL) {{ + const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); + item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); // 1) Copy all the 4-byte tuples size_t n_words = nsamps / 4; @@ -72,8 +79,8 @@ DECLARE_CONVERTER(u8, 1, u8_item32_{end}, 1, PRIORITY_GENERAL) {{ // 2) If nsamps was not a multiple of 4, copy the rest by hand size_t bytes_left = nsamps % 4; if (bytes_left) {{ - const u8_t *last_input_word = reinterpret_cast<const u8_t *>(&input[n_words]); - u8_t *last_output_word = reinterpret_cast<u8_t *>(&output[n_words]); + const {us8}_t *last_input_word = reinterpret_cast<const {us8}_t *>(&input[n_words]); + {us8}_t *last_output_word = reinterpret_cast<{us8}_t *>(&output[n_words]); for (size_t k = 0; k < bytes_left; k++) {{ last_output_word[k] = last_input_word[k]; }} @@ -81,9 +88,9 @@ DECLARE_CONVERTER(u8, 1, u8_item32_{end}, 1, PRIORITY_GENERAL) {{ }} }} -DECLARE_CONVERTER(u8_item32_{end}, 1, u8, 1, PRIORITY_GENERAL) {{ - const boost::uint32_t *input = reinterpret_cast<const boost::uint32_t *>(inputs[0]); - boost::uint32_t *output = reinterpret_cast<boost::uint32_t *>(outputs[0]); +DECLARE_CONVERTER({us8}_item32_{end}, 1, {us8}, 1, PRIORITY_GENERAL) {{ + const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); + item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); // 1) Copy all the 4-byte tuples size_t n_words = nsamps / 4; @@ -93,9 +100,9 @@ DECLARE_CONVERTER(u8_item32_{end}, 1, u8, 1, PRIORITY_GENERAL) {{ // 2) If nsamps was not a multiple of 4, copy the rest by hand size_t bytes_left = nsamps % 4; if (bytes_left) {{ - boost::uint32_t last_input_word = {to_host}(input[n_words]); - const u8_t *last_input_word_ptr = reinterpret_cast<const u8_t *>(&last_input_word); - u8_t *last_output_word = reinterpret_cast<u8_t *>(&output[n_words]); + item32_t last_input_word = {to_host}(input[n_words]); + const {us8}_t *last_input_word_ptr = reinterpret_cast<const {us8}_t *>(&last_input_word); + {us8}_t *last_output_word = reinterpret_cast<{us8}_t *>(&output[n_words]); for (size_t k = 0; k < bytes_left; k++) {{ last_output_word[k] = last_input_word_ptr[k]; }} @@ -103,6 +110,40 @@ DECLARE_CONVERTER(u8_item32_{end}, 1, u8, 1, PRIORITY_GENERAL) {{ }} """ +TMPL_CONV_S16 = """ +DECLARE_CONVERTER(s16, 1, s16_item32_{end}, 1, PRIORITY_GENERAL) {{ + const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); + item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); + + // 1) Copy all the 4-byte tuples + size_t n_words = nsamps / 2; + for (size_t i = 0; i < n_words; i++) {{ + output[i] = {to_wire}(input[i]); + }} + // 2) If nsamps was not a multiple of 2, copy the last one by hand + if (nsamps % 2) {{ + item32_t tmp = item32_t(*reinterpret_cast<const s16_t *>(&input[n_words])); + output[n_words] = {to_wire}(tmp); + }} +}} + +DECLARE_CONVERTER(s16_item32_{end}, 1, s16, 1, PRIORITY_GENERAL) {{ + const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); + item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); + + // 1) Copy all the 4-byte tuples + size_t n_words = nsamps / 2; + for (size_t i = 0; i < n_words; i++) {{ + output[i] = {to_host}(input[i]); + }} + // 2) If nsamps was not a multiple of 2, copy the last one by hand + if (nsamps % 2) {{ + item32_t tmp = {to_host}(input[n_words]); + *reinterpret_cast<s16_t *>(&output[n_words]) = s16_t(tmp); + }} +}} +""" + TMPL_CONV_USRP1_COMPLEX = """ DECLARE_CONVERTER(${cpu_type}, ${width}, sc16_item16_usrp1, 1, PRIORITY_GENERAL){ % for w in range(width): @@ -164,23 +205,52 @@ if __name__ == '__main__': file = os.path.basename(__file__) output = parse_tmpl(TMPL_HEADER, file=file) - #generate complex converters for all gen2 platforms - for end, to_host, to_wire in ( - ('be', 'uhd::ntohx', 'uhd::htonx'), - ('le', 'uhd::wtohx', 'uhd::htowx'), - ): - output += TMPL_CONV_GEN2_ITEM32.format( - end=end, to_host=to_host, to_wire=to_wire - ) - #generate raw (u8) converters: + ## Generate all data types that are exactly + ## item32 or multiples thereof: + for end in ('be', 'le'): + host_to_wire = {'be': 'uhd::htonx', 'le': 'uhd::htowx'}[end] + wire_to_host = {'be': 'uhd::ntohx', 'le': 'uhd::wtohx'}[end] + # item32 types (sc16->sc16 is a special case because it defaults + # to Q/I order on the wire: + for in_type, out_type, to_wire_or_host in ( + ('item32', 'sc16_item32_{end}', host_to_wire), + ('sc16_item32_{end}', 'item32', wire_to_host), + ('f32', 'f32_item32_{end}', host_to_wire), + ('f32_item32_{end}', 'f32', wire_to_host), + ): + output += TMPL_CONV_ITEM32.format( + end=end, to_wire_or_host=to_wire_or_host, + in_type=in_type.format(end=end), out_type=out_type.format(end=end) + ) + # 2xitem32 types: + for in_type, out_type in ( + ('fc32', 'fc32_item32_{end}'), + ('fc32_item32_{end}', 'fc32'), + ): + output += TMPL_CONV_ITEM64.format( + end=end, to_wire_or_host=to_wire_or_host, + in_type=in_type.format(end=end), out_type=out_type.format(end=end) + ) + + ## Real 16-Bit: for end, to_host, to_wire in ( ('be', 'uhd::ntohx', 'uhd::htonx'), ('le', 'uhd::wtohx', 'uhd::htowx'), ): - output += TMPL_CONV_U8.format( - end=end, to_host=to_host, to_wire=to_wire + output += TMPL_CONV_S16.format( + end=end, to_host=to_host, to_wire=to_wire ) + ## Real 8-Bit Types: + for us8 in ('u8', 's8'): + for end, to_host, to_wire in ( + ('be', 'uhd::ntohx', 'uhd::htonx'), + ('le', 'uhd::wtohx', 'uhd::htowx'), + ): + output += TMPL_CONV_U8S8.format( + us8=us8, end=end, to_host=to_host, to_wire=to_wire + ) + #generate complex converters for usrp1 format (requires Cheetah) for width in 1, 2, 4: for cpu_type, do_scale in ( diff --git a/host/lib/transport/super_recv_packet_handler.hpp b/host/lib/transport/super_recv_packet_handler.hpp index 0f1f7ff3a..3fcf9c1e6 100644 --- a/host/lib/transport/super_recv_packet_handler.hpp +++ b/host/lib/transport/super_recv_packet_handler.hpp @@ -203,6 +203,12 @@ public: //! Overload call to issue stream commands void issue_stream_cmd(const stream_cmd_t &stream_cmd) { + if (stream_cmd.stream_now + and stream_cmd.stream_mode != stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS + and _props.size() > 1) { + throw uhd::runtime_error("Attempting to do multi-channel receive with stream_now == true will result in misaligned channels. Aborting."); + } + for (size_t i = 0; i < _props.size(); i++) { if (_props[i].issue_stream_cmd) _props[i].issue_stream_cmd(stream_cmd); diff --git a/host/lib/usrp/b200/b200_impl.cpp b/host/lib/usrp/b200/b200_impl.cpp index ffce08567..3aaf28ab3 100644 --- a/host/lib/usrp/b200/b200_impl.cpp +++ b/host/lib/usrp/b200/b200_impl.cpp @@ -41,6 +41,7 @@ using namespace uhd; using namespace uhd::usrp; +using namespace uhd::usrp::gpio_atr; using namespace uhd::transport; static const boost::posix_time::milliseconds REENUMERATION_TIMEOUT_MS(3000); @@ -656,15 +657,15 @@ b200_impl::b200_impl(const uhd::device_addr_t& device_addr, usb_device_handle::s //////////////////////////////////////////////////////////////////// // front panel gpio //////////////////////////////////////////////////////////////////// - _radio_perifs[0].fp_gpio = gpio_core_200::make(_radio_perifs[0].ctrl, TOREG(SR_FP_GPIO), RB32_FP_GPIO); + _radio_perifs[0].fp_gpio = gpio_atr_3000::make(_radio_perifs[0].ctrl, TOREG(SR_FP_GPIO), RB32_FP_GPIO); BOOST_FOREACH(const gpio_attr_map_t::value_type attr, gpio_attr_map) { _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / attr.second) .set(0) - .subscribe(boost::bind(&b200_impl::set_fp_gpio, this, _radio_perifs[0].fp_gpio, attr.first, _1)); + .subscribe(boost::bind(&gpio_atr_3000::set_gpio_attr, _radio_perifs[0].fp_gpio, attr.first, _1)); } _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / "READBACK") - .publish(boost::bind(&b200_impl::get_fp_gpio, this, _radio_perifs[0].fp_gpio)); + .publish(boost::bind(&gpio_atr_3000::read_gpio, _radio_perifs[0].fp_gpio)); //////////////////////////////////////////////////////////////////// // dboard eeproms but not really @@ -677,10 +678,14 @@ b200_impl::b200_impl(const uhd::device_addr_t& device_addr, usb_device_handle::s //////////////////////////////////////////////////////////////////// // do some post-init tasks //////////////////////////////////////////////////////////////////// - - //init the clock rate to something reasonable - double default_tick_rate = device_addr.cast<double>("master_clock_rate", ad936x_manager::DEFAULT_TICK_RATE); + // Init the clock rate and the auto mcr appropriately + if (not device_addr.has_key("master_clock_rate")) { + UHD_MSG(status) << "Setting master clock rate selection to 'automatic'." << std::endl; + } + // We can automatically choose a master clock rate, but not if the user specifies one + const double default_tick_rate = device_addr.cast<double>("master_clock_rate", ad936x_manager::DEFAULT_TICK_RATE); _tree->access<double>(mb_path / "tick_rate").set(default_tick_rate); + _tree->access<bool>(mb_path / "auto_tick_rate").set(not device_addr.has_key("master_clock_rate")); //subdev spec contains full width of selections subdev_spec_t rx_spec, tx_spec; @@ -704,12 +709,6 @@ b200_impl::b200_impl(const uhd::device_addr_t& device_addr, usb_device_handle::s _radio_perifs[i].ddc->set_host_rate(default_tick_rate / ad936x_manager::DEFAULT_DECIM); _radio_perifs[i].duc->set_host_rate(default_tick_rate / ad936x_manager::DEFAULT_INTERP); } - // We can automatically choose a master clock rate, but not if the user specifies one - _tree->access<bool>(mb_path / "auto_tick_rate").set(not device_addr.has_key("master_clock_rate")); - if (not device_addr.has_key("master_clock_rate")) { - UHD_MSG(status) << "Setting master clock rate selection to 'automatic'." << std::endl; - } - } b200_impl::~b200_impl(void) @@ -753,14 +752,15 @@ void b200_impl::setup_radio(const size_t dspno) //////////////////////////////////////////////////////////////////// // Set up peripherals //////////////////////////////////////////////////////////////////// - perif.atr = gpio_core_200_32wo::make(perif.ctrl, TOREG(SR_ATR)); + perif.atr = gpio_atr_3000::make_write_only(perif.ctrl, TOREG(SR_ATR)); + perif.atr->set_atr_mode(MODE_ATR, 0xFFFFFFFF); // create rx dsp control objects perif.framer = rx_vita_core_3000::make(perif.ctrl, TOREG(SR_RX_CTRL)); perif.ddc = rx_dsp_core_3000::make(perif.ctrl, TOREG(SR_RX_DSP), true /*is_b200?*/); perif.ddc->set_link_rate(10e9/8); //whatever perif.ddc->set_mux("IQ", false, dspno == 1 ? true : false, dspno == 1 ? true : false); perif.ddc->set_freq(rx_dsp_core_3000::DEFAULT_CORDIC_FREQ); - perif.deframer = tx_vita_core_3000::make(perif.ctrl, TOREG(SR_TX_CTRL)); + perif.deframer = tx_vita_core_3000::make_no_radio_buff(perif.ctrl, TOREG(SR_TX_CTRL)); perif.duc = tx_dsp_core_3000::make(perif.ctrl, TOREG(SR_TX_DSP)); perif.duc->set_link_rate(10e9/8); //whatever perif.duc->set_freq(tx_dsp_core_3000::DEFAULT_CORDIC_FREQ); @@ -792,7 +792,6 @@ void b200_impl::setup_radio(const size_t dspno) // create tx dsp control objects //////////////////////////////////////////////////////////////////// _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&tx_vita_core_3000::set_tick_rate, perif.deframer, _1)) .subscribe(boost::bind(&tx_dsp_core_3000::set_tick_rate, perif.duc, _1)); const fs_path tx_dsp_path = mb_path / "tx_dsps" / dspno; perif.duc->populate_subtree(_tree->subtree(tx_dsp_path)); @@ -964,27 +963,6 @@ void b200_impl::set_mb_eeprom(const uhd::usrp::mboard_eeprom_t &mb_eeprom) mb_eeprom.commit(*_iface, "B200"); } - -boost::uint32_t b200_impl::get_fp_gpio(gpio_core_200::sptr gpio) -{ - return boost::uint32_t(gpio->read_gpio(dboard_iface::UNIT_RX)); -} - -void b200_impl::set_fp_gpio(gpio_core_200::sptr gpio, const gpio_attr_t attr, const boost::uint32_t value) -{ - switch (attr) - { - case GPIO_CTRL: return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value); - case GPIO_DDR: return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value); - case GPIO_OUT: return gpio->set_gpio_out(dboard_iface::UNIT_RX, value); - case GPIO_ATR_0X: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value); - case GPIO_ATR_RX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value); - case GPIO_ATR_TX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value); - case GPIO_ATR_XX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value); - default: UHD_THROW_INVALID_CODE_PATH(); - } -} - /*********************************************************************** * Reference time and clock **********************************************************************/ @@ -1154,11 +1132,11 @@ void b200_impl::update_atrs(void) if (enb_rx and enb_tx) fd = STATE_FDX1_TXRX; if (enb_rx and not enb_tx) fd = rxonly; if (not enb_rx and enb_tx) fd = txonly; - gpio_core_200_32wo::sptr atr = perif.atr; - atr->set_atr_reg(dboard_iface::ATR_REG_IDLE, STATE_OFF); - atr->set_atr_reg(dboard_iface::ATR_REG_RX_ONLY, rxonly); - atr->set_atr_reg(dboard_iface::ATR_REG_TX_ONLY, txonly); - atr->set_atr_reg(dboard_iface::ATR_REG_FULL_DUPLEX, fd); + gpio_atr_3000::sptr atr = perif.atr; + atr->set_atr_reg(ATR_REG_IDLE, STATE_OFF); + atr->set_atr_reg(ATR_REG_RX_ONLY, rxonly); + atr->set_atr_reg(ATR_REG_TX_ONLY, txonly); + atr->set_atr_reg(ATR_REG_FULL_DUPLEX, fd); } if (_radio_perifs.size() > _fe2 and _radio_perifs[_fe2].atr) { @@ -1172,11 +1150,11 @@ void b200_impl::update_atrs(void) if (enb_rx and enb_tx) fd = STATE_FDX2_TXRX; if (enb_rx and not enb_tx) fd = rxonly; if (not enb_rx and enb_tx) fd = txonly; - gpio_core_200_32wo::sptr atr = perif.atr; - atr->set_atr_reg(dboard_iface::ATR_REG_IDLE, STATE_OFF); - atr->set_atr_reg(dboard_iface::ATR_REG_RX_ONLY, rxonly); - atr->set_atr_reg(dboard_iface::ATR_REG_TX_ONLY, txonly); - atr->set_atr_reg(dboard_iface::ATR_REG_FULL_DUPLEX, fd); + gpio_atr_3000::sptr atr = perif.atr; + atr->set_atr_reg(ATR_REG_IDLE, STATE_OFF); + atr->set_atr_reg(ATR_REG_RX_ONLY, rxonly); + atr->set_atr_reg(ATR_REG_TX_ONLY, txonly); + atr->set_atr_reg(ATR_REG_FULL_DUPLEX, fd); } } diff --git a/host/lib/usrp/b200/b200_impl.hpp b/host/lib/usrp/b200/b200_impl.hpp index 25fef7d4b..b406572fb 100644 --- a/host/lib/usrp/b200/b200_impl.hpp +++ b/host/lib/usrp/b200/b200_impl.hpp @@ -27,7 +27,7 @@ #include "rx_vita_core_3000.hpp" #include "tx_vita_core_3000.hpp" #include "time_core_3000.hpp" -#include "gpio_core_200.hpp" +#include "gpio_atr_3000.hpp" #include "radio_ctrl_core_3000.hpp" #include "rx_dsp_core_3000.hpp" #include "tx_dsp_core_3000.hpp" @@ -49,8 +49,8 @@ #include "recv_packet_demuxer_3000.hpp" static const boost::uint8_t B200_FW_COMPAT_NUM_MAJOR = 8; static const boost::uint8_t B200_FW_COMPAT_NUM_MINOR = 0; -static const boost::uint16_t B200_FPGA_COMPAT_NUM = 11; -static const boost::uint16_t B205_FPGA_COMPAT_NUM = 2; +static const boost::uint16_t B200_FPGA_COMPAT_NUM = 12; +static const boost::uint16_t B205_FPGA_COMPAT_NUM = 3; static const double B200_BUS_CLOCK_RATE = 100e6; static const boost::uint32_t B200_GPSDO_ST_NONE = 0x83; static const size_t B200_MAX_RATE_USB2 = 53248000; // bytes/s @@ -177,8 +177,8 @@ private: struct radio_perifs_t { radio_ctrl_core_3000::sptr ctrl; - gpio_core_200_32wo::sptr atr; - gpio_core_200::sptr fp_gpio; + uhd::usrp::gpio_atr::gpio_atr_3000::sptr atr; + uhd::usrp::gpio_atr::gpio_atr_3000::sptr fp_gpio; time_core_3000::sptr time64; rx_vita_core_3000::sptr framer; rx_dsp_core_3000::sptr ddc; @@ -226,9 +226,6 @@ private: void update_enables(void); void update_atrs(void); - boost::uint32_t get_fp_gpio(gpio_core_200::sptr); - void set_fp_gpio(gpio_core_200::sptr, const gpio_attr_t, const boost::uint32_t); - double _tick_rate; double get_tick_rate(void){return _tick_rate;} double set_tick_rate(const double rate); diff --git a/host/lib/usrp/b200/b200_io_impl.cpp b/host/lib/usrp/b200/b200_io_impl.cpp index 7fcd04823..41b4b8a74 100644 --- a/host/lib/usrp/b200/b200_io_impl.cpp +++ b/host/lib/usrp/b200/b200_io_impl.cpp @@ -159,7 +159,6 @@ void b200_impl::update_tick_rate(const double new_tick_rate) boost::shared_ptr<sph::send_packet_streamer> my_streamer = boost::dynamic_pointer_cast<sph::send_packet_streamer>(perif.tx_streamer.lock()); if (my_streamer) my_streamer->set_tick_rate(new_tick_rate); - perif.deframer->set_tick_rate(new_tick_rate); } } diff --git a/host/lib/usrp/common/ad9361_ctrl.hpp b/host/lib/usrp/common/ad9361_ctrl.hpp index 5c438ee9c..8cd75d539 100644 --- a/host/lib/usrp/common/ad9361_ctrl.hpp +++ b/host/lib/usrp/common/ad9361_ctrl.hpp @@ -89,8 +89,10 @@ public: //! get the clock rate range for the frontend static uhd::meta_range_t get_clock_rate_range(void) { - //return uhd::meta_range_t(220e3, 61.44e6); - return uhd::meta_range_t(5e6, ad9361_device_t::AD9361_MAX_CLOCK_RATE); //5 MHz DCM low end + return uhd::meta_range_t( + ad9361_device_t::AD9361_MIN_CLOCK_RATE, + ad9361_device_t::AD9361_MAX_CLOCK_RATE + ); } //! set the filter bandwidth for the frontend's analog low pass diff --git a/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp b/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp index 0a8a61575..bb25379c0 100644 --- a/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp +++ b/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp @@ -91,6 +91,7 @@ int get_num_taps(int max_num_taps) { } const double ad9361_device_t::AD9361_MAX_GAIN = 89.75; +const double ad9361_device_t::AD9361_MIN_CLOCK_RATE = 220e3; const double ad9361_device_t::AD9361_MAX_CLOCK_RATE = 61.44e6; const double ad9361_device_t::AD9361_CAL_VALID_WINDOW = 100e6; // Max bandwdith is due to filter rolloff in analog filter stage @@ -770,7 +771,7 @@ void ad9361_device_t::_calibrate_rf_dc_offset() size_t count = 0; _io_iface->poke8(0x016, 0x02); while (_io_iface->peek8(0x016) & 0x02) { - if (count > 100) { + if (count > 200) { throw uhd::runtime_error("[ad9361_device_t] RF DC Offset Calibration Failure"); break; } @@ -821,7 +822,7 @@ void ad9361_device_t::_calibrate_rx_quadrature() size_t count = 0; _io_iface->poke8(0x016, 0x20); while (_io_iface->peek8(0x016) & 0x20) { - if (count > 100) { + if (count > 1000) { throw uhd::runtime_error("[ad9361_device_t] Rx Quadrature Calibration Failure"); break; } diff --git a/host/lib/usrp/common/ad9361_driver/ad9361_device.h b/host/lib/usrp/common/ad9361_driver/ad9361_device.h index 66bc2e8b9..73b1d9a35 100644 --- a/host/lib/usrp/common/ad9361_driver/ad9361_device.h +++ b/host/lib/usrp/common/ad9361_driver/ad9361_device.h @@ -157,6 +157,7 @@ public: //Constants static const double AD9361_MAX_GAIN; static const double AD9361_MAX_CLOCK_RATE; + static const double AD9361_MIN_CLOCK_RATE; static const double AD9361_CAL_VALID_WINDOW; static const double AD9361_RECOMMENDED_MAX_BANDWIDTH; static const double DEFAULT_RX_FREQ; diff --git a/host/lib/usrp/cores/CMakeLists.txt b/host/lib/usrp/cores/CMakeLists.txt index f28ae040f..7a0f6cc93 100644 --- a/host/lib/usrp/cores/CMakeLists.txt +++ b/host/lib/usrp/cores/CMakeLists.txt @@ -40,4 +40,6 @@ LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/rx_dsp_core_3000.cpp ${CMAKE_CURRENT_SOURCE_DIR}/tx_dsp_core_3000.cpp ${CMAKE_CURRENT_SOURCE_DIR}/radio_ctrl_core_3000.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/gpio_atr_3000.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dma_fifo_core_3000.cpp ) diff --git a/host/lib/usrp/cores/dma_fifo_core_3000.cpp b/host/lib/usrp/cores/dma_fifo_core_3000.cpp new file mode 100644 index 000000000..1a9d5dd5c --- /dev/null +++ b/host/lib/usrp/cores/dma_fifo_core_3000.cpp @@ -0,0 +1,397 @@ +// +// Copyright 2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "dma_fifo_core_3000.hpp" +#include <uhd/exception.hpp> +#include <boost/thread/thread.hpp> //sleep +#include <uhd/utils/soft_register.hpp> +#include <uhd/utils/msg.hpp> + +using namespace uhd; + +#define SR_DRAM_BIST_BASE 16 + +dma_fifo_core_3000::~dma_fifo_core_3000(void) { + /* NOP */ +} + +class dma_fifo_core_3000_impl : public dma_fifo_core_3000 +{ +protected: + class rb_addr_reg_t : public soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(ADDR, /*width*/ 3, /*shift*/ 0); //[2:0] + + static const boost::uint32_t RB_FIFO_STATUS = 0; + static const boost::uint32_t RB_BIST_STATUS = 1; + static const boost::uint32_t RB_BIST_XFER_CNT = 2; + static const boost::uint32_t RB_BIST_CYC_CNT = 3; + + rb_addr_reg_t(boost::uint32_t base): + soft_reg32_wo_t(base + 0) + { + //Initial values + set(ADDR, RB_FIFO_STATUS); + } + }; + + class fifo_ctrl_reg_t : public soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(CLEAR_FIFO, /*width*/ 1, /*shift*/ 0); //[0] + UHD_DEFINE_SOFT_REG_FIELD(RD_SUPPRESS_EN, /*width*/ 1, /*shift*/ 1); //[1] + UHD_DEFINE_SOFT_REG_FIELD(BURST_TIMEOUT, /*width*/ 12, /*shift*/ 4); //[15:4] + UHD_DEFINE_SOFT_REG_FIELD(RD_SUPPRESS_THRESH, /*width*/ 16, /*shift*/ 16); //[31:16] + + fifo_ctrl_reg_t(boost::uint32_t base): + soft_reg32_wo_t(base + 4) + { + //Initial values + set(CLEAR_FIFO, 1); + set(RD_SUPPRESS_EN, 0); + set(BURST_TIMEOUT, 256); + set(RD_SUPPRESS_THRESH, 0); + } + }; + + class base_addr_reg_t : public soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(BASE_ADDR, /*width*/ 30, /*shift*/ 0); //[29:0] + + base_addr_reg_t(boost::uint32_t base): + soft_reg32_wo_t(base + 8) + { + //Initial values + set(BASE_ADDR, 0x00000000); + } + }; + + class addr_mask_reg_t : public soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(ADDR_MASK, /*width*/ 30, /*shift*/ 0); //[29:0] + + addr_mask_reg_t(boost::uint32_t base): + soft_reg32_wo_t(base + 12) + { + //Initial values + set(ADDR_MASK, 0xFF000000); + } + }; + + class bist_ctrl_reg_t : public soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(GO, /*width*/ 1, /*shift*/ 0); //[0] + UHD_DEFINE_SOFT_REG_FIELD(CONTINUOUS_MODE, /*width*/ 1, /*shift*/ 1); //[1] + UHD_DEFINE_SOFT_REG_FIELD(TEST_PATT, /*width*/ 2, /*shift*/ 4); //[5:4] + + static const boost::uint32_t TEST_PATT_ZERO_ONE = 0; + static const boost::uint32_t TEST_PATT_CHECKERBOARD = 1; + static const boost::uint32_t TEST_PATT_COUNT = 2; + static const boost::uint32_t TEST_PATT_COUNT_INV = 3; + + bist_ctrl_reg_t(boost::uint32_t base): + soft_reg32_wo_t(base + 16) + { + //Initial values + set(GO, 0); + set(CONTINUOUS_MODE, 0); + set(TEST_PATT, TEST_PATT_ZERO_ONE); + } + }; + + class bist_cfg_reg_t : public soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(MAX_PKTS, /*width*/ 18, /*shift*/ 0); //[17:0] + UHD_DEFINE_SOFT_REG_FIELD(MAX_PKT_SIZE, /*width*/ 13, /*shift*/ 18); //[30:18] + UHD_DEFINE_SOFT_REG_FIELD(PKT_SIZE_RAMP, /*width*/ 1, /*shift*/ 31); //[31] + + bist_cfg_reg_t(boost::uint32_t base): + soft_reg32_wo_t(base + 20) + { + //Initial values + set(MAX_PKTS, 0); + set(MAX_PKT_SIZE, 0); + set(PKT_SIZE_RAMP, 0); + } + }; + + class bist_delay_reg_t : public soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(TX_PKT_DELAY, /*width*/ 16, /*shift*/ 0); //[15:0] + UHD_DEFINE_SOFT_REG_FIELD(RX_SAMP_DELAY, /*width*/ 8, /*shift*/ 16); //[23:16] + + bist_delay_reg_t(boost::uint32_t base): + soft_reg32_wo_t(base + 24) + { + //Initial values + set(TX_PKT_DELAY, 0); + set(RX_SAMP_DELAY, 0); + } + }; + + class bist_sid_reg_t : public soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(SID, /*width*/ 32, /*shift*/ 0); //[31:0] + + bist_sid_reg_t(boost::uint32_t base): + soft_reg32_wo_t(base + 28) + { + //Initial values + set(SID, 0); + } + }; + +public: + class fifo_readback { + public: + fifo_readback(wb_iface::sptr iface, const size_t base, const size_t rb_addr) : + _iface(iface), _addr_reg(base), _rb_addr(rb_addr) + { + _addr_reg.initialize(*iface, true); + } + + bool is_fifo_instantiated() { + boost::lock_guard<boost::mutex> lock(_mutex); + _addr_reg.write(rb_addr_reg_t::ADDR, rb_addr_reg_t::RB_FIFO_STATUS); + return _iface->peek32(_rb_addr) & 0x80000000; + } + + boost::uint32_t get_occupied_cnt() { + boost::lock_guard<boost::mutex> lock(_mutex); + _addr_reg.write(rb_addr_reg_t::ADDR, rb_addr_reg_t::RB_FIFO_STATUS); + return _iface->peek32(_rb_addr) & 0x7FFFFFF; + } + + boost::uint32_t is_fifo_busy() { + boost::lock_guard<boost::mutex> lock(_mutex); + _addr_reg.write(rb_addr_reg_t::ADDR, rb_addr_reg_t::RB_FIFO_STATUS); + return _iface->peek32(_rb_addr) & 0x40000000; + } + + struct bist_status_t { + bool running; + bool finished; + boost::uint8_t error; + }; + + bist_status_t get_bist_status() { + boost::lock_guard<boost::mutex> lock(_mutex); + _addr_reg.write(rb_addr_reg_t::ADDR, rb_addr_reg_t::RB_BIST_STATUS); + boost::uint32_t st32 = _iface->peek32(_rb_addr) & 0xF; + bist_status_t status; + status.running = st32 & 0x1; + status.finished = st32 & 0x2; + status.error = static_cast<boost::uint8_t>((st32>>2) & 0x3); + return status; + } + + bool is_ext_bist_supported() { + boost::lock_guard<boost::mutex> lock(_mutex); + _addr_reg.write(rb_addr_reg_t::ADDR, rb_addr_reg_t::RB_BIST_STATUS); + return _iface->peek32(_rb_addr) & 0x80000000; + } + + double get_xfer_ratio() { + boost::lock_guard<boost::mutex> lock(_mutex); + boost::uint32_t xfer_cnt = 0, cyc_cnt = 0; + _addr_reg.write(rb_addr_reg_t::ADDR, rb_addr_reg_t::RB_BIST_XFER_CNT); + xfer_cnt = _iface->peek32(_rb_addr); + _addr_reg.write(rb_addr_reg_t::ADDR, rb_addr_reg_t::RB_BIST_CYC_CNT); + cyc_cnt = _iface->peek32(_rb_addr); + return (static_cast<double>(xfer_cnt)/cyc_cnt); + } + + private: + wb_iface::sptr _iface; + rb_addr_reg_t _addr_reg; + const size_t _rb_addr; + boost::mutex _mutex; + }; + +public: + dma_fifo_core_3000_impl(wb_iface::sptr iface, const size_t base, const size_t readback): + _iface(iface), _base(base), _fifo_readback(iface, base, readback), + _fifo_ctrl_reg(base), _base_addr_reg(base), _addr_mask_reg(base), + _bist_ctrl_reg(base), _bist_cfg_reg(base), _bist_delay_reg(base), _bist_sid_reg(base) + { + _fifo_ctrl_reg.initialize(*iface, true); + _base_addr_reg.initialize(*iface, true); + _addr_mask_reg.initialize(*iface, true); + _bist_ctrl_reg.initialize(*iface, true); + _bist_cfg_reg.initialize(*iface, true); + _has_ext_bist = _fifo_readback.is_ext_bist_supported(); + if (_has_ext_bist) { + _bist_delay_reg.initialize(*iface, true); + _bist_sid_reg.initialize(*iface, true); + } + flush(); + } + + virtual void flush() { + //Clear the FIFO and hold it in that state + _fifo_ctrl_reg.write(fifo_ctrl_reg_t::CLEAR_FIFO, 1); + //Re-arm the FIFO + _wait_for_fifo_empty(); + _fifo_ctrl_reg.write(fifo_ctrl_reg_t::CLEAR_FIFO, 0); + } + + virtual void resize(const boost::uint32_t base_addr, const boost::uint32_t size) { + //Validate parameters + if (size < 8192) throw uhd::runtime_error("DMA FIFO must be larger than 8KiB"); + boost::uint32_t size_mask = size - 1; + if (size & size_mask) throw uhd::runtime_error("DMA FIFO size must be a power of 2"); + + //Clear the FIFO and hold it in that state + _fifo_ctrl_reg.write(fifo_ctrl_reg_t::CLEAR_FIFO, 1); + //Write base address and mask + _base_addr_reg.write(base_addr_reg_t::BASE_ADDR, base_addr); + _addr_mask_reg.write(addr_mask_reg_t::ADDR_MASK, ~size_mask); + + //Re-arm the FIFO + flush(); + } + + virtual boost::uint32_t get_bytes_occupied() { + return _fifo_readback.get_occupied_cnt() * 8; + } + + virtual bool ext_bist_supported() { + return _fifo_readback.is_ext_bist_supported(); + } + + virtual boost::uint8_t run_bist(bool finite = true, boost::uint32_t timeout_ms = 500) { + return run_ext_bist(finite, 0, 0, 0, timeout_ms); + } + + virtual boost::uint8_t run_ext_bist( + bool finite, + boost::uint32_t rx_samp_delay, + boost::uint32_t tx_pkt_delay, + boost::uint32_t sid, + boost::uint32_t timeout_ms = 500 + ) { + boost::lock_guard<boost::mutex> lock(_mutex); + + _wait_for_bist_done(timeout_ms, true); //Stop previous BIST and wait (if running) + _bist_ctrl_reg.write(bist_ctrl_reg_t::GO, 0); //Reset + + _bist_cfg_reg.set(bist_cfg_reg_t::MAX_PKTS, (2^18)-1); + _bist_cfg_reg.set(bist_cfg_reg_t::MAX_PKT_SIZE, 8000); + _bist_cfg_reg.set(bist_cfg_reg_t::PKT_SIZE_RAMP, 0); + _bist_cfg_reg.flush(); + + if (_has_ext_bist) { + _bist_delay_reg.set(bist_delay_reg_t::RX_SAMP_DELAY, rx_samp_delay); + _bist_delay_reg.set(bist_delay_reg_t::TX_PKT_DELAY, tx_pkt_delay); + _bist_delay_reg.flush(); + + _bist_sid_reg.write(bist_sid_reg_t::SID, sid); + } else { + if (rx_samp_delay != 0 || tx_pkt_delay != 0 || sid != 0) { + throw uhd::not_implemented_error( + "dma_fifo_core_3000: Runtime delay and SID support only available on FPGA images with extended BIST enabled"); + } + } + + _bist_ctrl_reg.set(bist_ctrl_reg_t::TEST_PATT, bist_ctrl_reg_t::TEST_PATT_COUNT); + _bist_ctrl_reg.set(bist_ctrl_reg_t::CONTINUOUS_MODE, finite ? 0 : 1); + _bist_ctrl_reg.write(bist_ctrl_reg_t::GO, 1); + + if (!finite) { + boost::this_thread::sleep(boost::posix_time::milliseconds(timeout_ms)); + } + + _wait_for_bist_done(timeout_ms, !finite); + if (!_fifo_readback.get_bist_status().finished) { + throw uhd::runtime_error("dma_fifo_core_3000: DRAM BIST state machine is in a bad state."); + } + + return _fifo_readback.get_bist_status().error; + } + + virtual double get_bist_throughput(double fifo_clock_rate) { + if (_has_ext_bist) { + _wait_for_bist_done(1000); + static const double BYTES_PER_CYC = 8; + return _fifo_readback.get_xfer_ratio() * fifo_clock_rate * BYTES_PER_CYC; + } else { + throw uhd::not_implemented_error( + "dma_fifo_core_3000: Throughput counter only available on FPGA images with extended BIST enabled"); + } + } + +private: + void _wait_for_fifo_empty() + { + boost::posix_time::ptime start_time = boost::posix_time::microsec_clock::local_time(); + boost::posix_time::time_duration elapsed; + + while (_fifo_readback.is_fifo_busy()) { + boost::this_thread::sleep(boost::posix_time::microsec(1000)); + elapsed = boost::posix_time::microsec_clock::local_time() - start_time; + if (elapsed.total_milliseconds() > 100) break; + } + } + + void _wait_for_bist_done(boost::uint32_t timeout_ms, bool force_stop = false) + { + boost::posix_time::ptime start_time = boost::posix_time::microsec_clock::local_time(); + boost::posix_time::time_duration elapsed; + + while (_fifo_readback.get_bist_status().running) { + if (force_stop) { + _bist_ctrl_reg.write(bist_ctrl_reg_t::GO, 0); + force_stop = false; + } + boost::this_thread::sleep(boost::posix_time::microsec(1000)); + elapsed = boost::posix_time::microsec_clock::local_time() - start_time; + if (elapsed.total_milliseconds() > timeout_ms) break; + } + } + +private: + wb_iface::sptr _iface; + const size_t _base; + boost::mutex _mutex; + bool _has_ext_bist; + + fifo_readback _fifo_readback; + fifo_ctrl_reg_t _fifo_ctrl_reg; + base_addr_reg_t _base_addr_reg; + addr_mask_reg_t _addr_mask_reg; + bist_ctrl_reg_t _bist_ctrl_reg; + bist_cfg_reg_t _bist_cfg_reg; + bist_delay_reg_t _bist_delay_reg; + bist_sid_reg_t _bist_sid_reg; +}; + +// +// Static make function +// +dma_fifo_core_3000::sptr dma_fifo_core_3000::make(wb_iface::sptr iface, const size_t set_base, const size_t rb_addr) +{ + if (check(iface, set_base, rb_addr)) { + return sptr(new dma_fifo_core_3000_impl(iface, set_base, rb_addr)); + } else { + throw uhd::runtime_error(""); + } +} + +bool dma_fifo_core_3000::check(wb_iface::sptr iface, const size_t set_base, const size_t rb_addr) +{ + dma_fifo_core_3000_impl::fifo_readback fifo_rb(iface, set_base, rb_addr); + return fifo_rb.is_fifo_instantiated(); +} diff --git a/host/lib/usrp/cores/dma_fifo_core_3000.hpp b/host/lib/usrp/cores/dma_fifo_core_3000.hpp new file mode 100644 index 000000000..41430e5c3 --- /dev/null +++ b/host/lib/usrp/cores/dma_fifo_core_3000.hpp @@ -0,0 +1,86 @@ +// +// Copyright 2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_LIBUHD_USRP_DMA_FIFO_CORE_3000_HPP +#define INCLUDED_LIBUHD_USRP_DMA_FIFO_CORE_3000_HPP + +#include <uhd/config.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/noncopyable.hpp> +#include <uhd/types/wb_iface.hpp> + + +class dma_fifo_core_3000 : boost::noncopyable +{ +public: + typedef boost::shared_ptr<dma_fifo_core_3000> sptr; + virtual ~dma_fifo_core_3000(void) = 0; + + /*! + * Create a DMA FIFO controller using the given bus, settings and readback base + * Throws uhd::runtime_error if a DMA FIFO is not instantiated in the FPGA + */ + static sptr make(uhd::wb_iface::sptr iface, const size_t set_base, const size_t rb_addr); + + /*! + * Check if a DMA FIFO is instantiated in the FPGA + */ + static bool check(uhd::wb_iface::sptr iface, const size_t set_base, const size_t rb_addr); + + /*! + * Flush the DMA FIFO. Will clear all contents. + */ + virtual void flush() = 0; + + /*! + * Resize and rebase the DMA FIFO. Will clear all contents. + */ + virtual void resize(const boost::uint32_t base_addr, const boost::uint32_t size) = 0; + + /*! + * Get the (approx) number of bytes currently in the DMA FIFO + */ + virtual boost::uint32_t get_bytes_occupied() = 0; + + /*! + * Run the built-in-self-test routine for the DMA FIFO + */ + virtual boost::uint8_t run_bist(bool finite = true, boost::uint32_t timeout_ms = 500) = 0; + + /*! + * Is extended BIST supported + */ + virtual bool ext_bist_supported() = 0; + + /*! + * Run the built-in-self-test routine for the DMA FIFO (extended BIST only) + */ + virtual boost::uint8_t run_ext_bist( + bool finite, + boost::uint32_t rx_samp_delay, + boost::uint32_t tx_pkt_delay, + boost::uint32_t sid, + boost::uint32_t timeout_ms = 500) = 0; + + /*! + * Get the throughput measured from the last invocation of the BIST (extended BIST only) + */ + virtual double get_bist_throughput(double fifo_clock_rate) = 0; + +}; + +#endif /* INCLUDED_LIBUHD_USRP_DMA_FIFO_CORE_3000_HPP */ diff --git a/host/lib/usrp/cores/gpio_atr_3000.cpp b/host/lib/usrp/cores/gpio_atr_3000.cpp new file mode 100644 index 000000000..3e0aa1f03 --- /dev/null +++ b/host/lib/usrp/cores/gpio_atr_3000.cpp @@ -0,0 +1,297 @@ +// +// Copyright 2011,2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "gpio_atr_3000.hpp" +#include <uhd/types/dict.hpp> +#include <uhd/utils/soft_register.hpp> + +using namespace uhd; +using namespace usrp; + +//------------------------------------------------------------- +// gpio_atr_3000 +//------------------------------------------------------------- + +#define REG_ATR_IDLE_OFFSET (base + 0) +#define REG_ATR_RX_OFFSET (base + 4) +#define REG_ATR_TX_OFFSET (base + 8) +#define REG_ATR_FDX_OFFSET (base + 12) +#define REG_DDR_OFFSET (base + 16) +#define REG_ATR_DISABLE_OFFSET (base + 20) + +namespace uhd { namespace usrp { namespace gpio_atr { + +class gpio_atr_3000_impl : public gpio_atr_3000{ +public: + gpio_atr_3000_impl( + wb_iface::sptr iface, + const wb_iface::wb_addr_type base, + const wb_iface::wb_addr_type rb_addr = READBACK_DISABLED + ): + _iface(iface), _rb_addr(rb_addr), + _atr_idle_reg(REG_ATR_IDLE_OFFSET, _atr_disable_reg), + _atr_rx_reg(REG_ATR_RX_OFFSET), + _atr_tx_reg(REG_ATR_TX_OFFSET), + _atr_fdx_reg(REG_ATR_FDX_OFFSET), + _ddr_reg(REG_DDR_OFFSET), + _atr_disable_reg(REG_ATR_DISABLE_OFFSET) + { + _atr_idle_reg.initialize(*_iface, true); + _atr_rx_reg.initialize(*_iface, true); + _atr_tx_reg.initialize(*_iface, true); + _atr_fdx_reg.initialize(*_iface, true); + _ddr_reg.initialize(*_iface, true); + _atr_disable_reg.initialize(*_iface, true); + } + + virtual void set_atr_mode(const gpio_atr_mode_t mode, const boost::uint32_t mask) + { + //Each bit in the "ATR Disable" register determines whether the respective bit in the GPIO + //output bus is driven by the ATR engine or a static register. + //For each bit position, a 1 means that the bit is static and 0 means that the bit + //is driven by the ATR state machine. + //This setting will only get applied to all bits in the "mask" that are 1. All other + //bits will retain their old value. + _atr_disable_reg.set_with_mask((mode==MODE_ATR) ? ~MASK_SET_ALL : MASK_SET_ALL, mask); + _atr_disable_reg.flush(); + } + + virtual void set_gpio_ddr(const gpio_ddr_t dir, const boost::uint32_t mask) + { + //Each bit in the "DDR" register determines whether the respective bit in the GPIO + //bus is an input or an output. + //For each bit position, a 1 means that the bit is an output and 0 means that the bit + //is an input. + //This setting will only get applied to all bits in the "mask" that are 1. All other + //bits will retain their old value. + _ddr_reg.set_with_mask((dir==DDR_INPUT) ? ~MASK_SET_ALL : MASK_SET_ALL, mask); + _ddr_reg.flush(); + } + + virtual void set_atr_reg(const gpio_atr_reg_t atr, const boost::uint32_t value, const boost::uint32_t mask = MASK_SET_ALL) + { + //Set the value of the specified ATR register. For bits with ATR Disable set to 1, + //the IDLE register will hold the output state + //This setting will only get applied to all bits in the "mask" that are 1. All other + //bits will retain their old value. + masked_reg_t* reg = NULL; + switch (atr) { + case ATR_REG_IDLE: reg = &_atr_idle_reg; break; + case ATR_REG_RX_ONLY: reg = &_atr_rx_reg; break; + case ATR_REG_TX_ONLY: reg = &_atr_tx_reg; break; + case ATR_REG_FULL_DUPLEX: reg = &_atr_fdx_reg; break; + default: reg = &_atr_idle_reg; break; + } + //For protection we only write to bits that have the mode ATR by masking the user + //specified "mask" with ~atr_disable. + reg->set_with_mask(value, mask); + reg->flush(); + } + + virtual void set_gpio_out(const boost::uint32_t value, const boost::uint32_t mask = MASK_SET_ALL) { + //Set the value of the specified GPIO output register. + //This setting will only get applied to all bits in the "mask" that are 1. All other + //bits will retain their old value. + + //For protection we only write to bits that have the mode GPIO by masking the user + //specified "mask" with atr_disable. + _atr_idle_reg.set_gpio_out_with_mask(value, mask); + _atr_idle_reg.flush(); + } + + virtual boost::uint32_t read_gpio() + { + //Read the state of the GPIO pins + //If a pin is configured as an input, reads the actual value of the pin + //If a pin is configured as an output, reads the last value written to the pin + if (_rb_addr != READBACK_DISABLED) { + return _iface->peek32(_rb_addr); + } else { + throw uhd::runtime_error("read_gpio not supported for write-only interface."); + } + } + + inline virtual void set_gpio_attr(const gpio_attr_t attr, const boost::uint32_t value) + { + //An attribute based API to configure all settings for the GPIO bus in one function + //call. This API does not have a mask so it configures all bits at the same time. + switch (attr) + { + case GPIO_CTRL: + set_atr_mode(MODE_ATR, value); //Configure mode=ATR for all bits that are set + set_atr_mode(MODE_GPIO, ~value); //Configure mode=GPIO for all bits that are unset + break; + case GPIO_DDR: + set_gpio_ddr(DDR_OUTPUT, value); //Configure as output for all bits that are set + set_gpio_ddr(DDR_INPUT, ~value); //Configure as input for all bits that are unset + break; + case GPIO_OUT: + //Only set bits that are driven statically + set_gpio_out(value); + break; + case GPIO_ATR_0X: + //Only set bits that are driven by the ATR engine + set_atr_reg(ATR_REG_IDLE, value); + break; + case GPIO_ATR_RX: + //Only set bits that are driven by the ATR engine + set_atr_reg(ATR_REG_RX_ONLY, value); + break; + case GPIO_ATR_TX: + //Only set bits that are driven by the ATR engine + set_atr_reg(ATR_REG_TX_ONLY, value); + break; + case GPIO_ATR_XX: + //Only set bits that are driven by the ATR engine + set_atr_reg(ATR_REG_FULL_DUPLEX, value); + break; + default: + UHD_THROW_INVALID_CODE_PATH(); + } + } + +private: + //Special RB addr value to indicate no readback + //This value is invalid as a real address because it is not a multiple of 4 + static const wb_iface::wb_addr_type READBACK_DISABLED = 0xFFFFFFFF; + + class masked_reg_t : public uhd::soft_reg32_wo_t { + public: + masked_reg_t(const wb_iface::wb_addr_type offset): uhd::soft_reg32_wo_t(offset) { + set(REGISTER, 0); + } + + virtual void set_with_mask(const boost::uint32_t value, const boost::uint32_t mask) { + set(REGISTER, (value&mask)|(get(REGISTER)&(~mask))); + } + + virtual void flush() { + uhd::soft_reg32_wo_t::flush(); + } + }; + + class atr_idle_reg_t : public masked_reg_t { + public: + atr_idle_reg_t(const wb_iface::wb_addr_type offset, masked_reg_t& atr_disable_reg): + masked_reg_t(offset), + _atr_idle_cache(0), _gpio_out_cache(0), + _atr_disable_reg(atr_disable_reg) + { } + + virtual void set_with_mask(const boost::uint32_t value, const boost::uint32_t mask) { + _atr_idle_cache = (value&mask)|(_atr_idle_cache&(~mask)); + } + + void set_gpio_out_with_mask(const boost::uint32_t value, const boost::uint32_t mask) { + _gpio_out_cache = (value&mask)|(_gpio_out_cache&(~mask)); + } + + virtual void flush() { + set(REGISTER, + (_atr_idle_cache & (~_atr_disable_reg.get(REGISTER))) | + (_gpio_out_cache & _atr_disable_reg.get(REGISTER)) + ); + masked_reg_t::flush(); + } + + private: + boost::uint32_t _atr_idle_cache; + boost::uint32_t _gpio_out_cache; + masked_reg_t& _atr_disable_reg; + }; + + wb_iface::sptr _iface; + wb_iface::wb_addr_type _rb_addr; + atr_idle_reg_t _atr_idle_reg; + masked_reg_t _atr_rx_reg; + masked_reg_t _atr_tx_reg; + masked_reg_t _atr_fdx_reg; + masked_reg_t _ddr_reg; + masked_reg_t _atr_disable_reg; +}; + +gpio_atr_3000::sptr gpio_atr_3000::make( + wb_iface::sptr iface, const wb_iface::wb_addr_type base, const wb_iface::wb_addr_type rb_addr +) { + return sptr(new gpio_atr_3000_impl(iface, base, rb_addr)); +} + +gpio_atr_3000::sptr gpio_atr_3000::make_write_only( + wb_iface::sptr iface, const wb_iface::wb_addr_type base +) { + gpio_atr_3000::sptr gpio_iface(new gpio_atr_3000_impl(iface, base)); + gpio_iface->set_gpio_ddr(DDR_OUTPUT, MASK_SET_ALL); + return gpio_iface; +} + +//------------------------------------------------------------- +// db_gpio_atr_3000 +//------------------------------------------------------------- + +class db_gpio_atr_3000_impl : public gpio_atr_3000_impl, public db_gpio_atr_3000 { +public: + db_gpio_atr_3000_impl(wb_iface::sptr iface, const wb_iface::wb_addr_type base, const wb_iface::wb_addr_type rb_addr): + gpio_atr_3000_impl(iface, base, rb_addr) { /* NOP */ } + + inline void set_pin_ctrl(const db_unit_t unit, const boost::uint16_t value) + { + gpio_atr_3000_impl::set_atr_mode(MODE_ATR, compute_mask(unit, value)); + gpio_atr_3000_impl::set_atr_mode(MODE_GPIO, compute_mask(unit, ~value)); + } + + inline void set_gpio_ddr(const db_unit_t unit, const boost::uint16_t value) + { + gpio_atr_3000_impl::set_gpio_ddr(DDR_OUTPUT, compute_mask(unit, value)); + gpio_atr_3000_impl::set_gpio_ddr(DDR_INPUT, compute_mask(unit, ~value)); + } + + inline void set_atr_reg(const db_unit_t unit, const gpio_atr_reg_t atr, const boost::uint16_t value) + { + gpio_atr_3000_impl::set_atr_reg(atr, + static_cast<boost::uint32_t>(value) << compute_shift(unit), + compute_mask(unit, 0xFFFF)); + } + + inline void set_gpio_out(const db_unit_t unit, const boost::uint16_t value) + { + gpio_atr_3000_impl::set_gpio_out( + static_cast<boost::uint32_t>(value) << compute_shift(unit), + compute_mask(unit, 0xFFFF)); + } + + inline boost::uint16_t read_gpio(const db_unit_t unit) + { + return boost::uint16_t(gpio_atr_3000_impl::read_gpio() >> compute_shift(unit)); + } + +private: + inline boost::uint32_t compute_shift(const db_unit_t unit) { + return (unit == dboard_iface::UNIT_RX) ? 0 : 16; + } + + inline boost::uint32_t compute_mask(const db_unit_t unit, const boost::uint16_t mask) { + return static_cast<boost::uint32_t>(mask) << (compute_shift(unit)); + } +}; + +db_gpio_atr_3000::sptr db_gpio_atr_3000::make( + wb_iface::sptr iface, const wb_iface::wb_addr_type base, const wb_iface::wb_addr_type rb_addr +) { + return sptr(new db_gpio_atr_3000_impl(iface, base, rb_addr)); +} + +}}} diff --git a/host/lib/usrp/cores/gpio_atr_3000.hpp b/host/lib/usrp/cores/gpio_atr_3000.hpp new file mode 100644 index 000000000..b30cd3b85 --- /dev/null +++ b/host/lib/usrp/cores/gpio_atr_3000.hpp @@ -0,0 +1,175 @@ +// +// Copyright 2011,2014,2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_LIBUHD_USRP_GPIO_CORE_3000_HPP +#define INCLUDED_LIBUHD_USRP_GPIO_CORE_3000_HPP + +#include <uhd/config.hpp> +#include <uhd/usrp/dboard_iface.hpp> +#include <uhd/usrp/gpio_defs.hpp> +#include <boost/shared_ptr.hpp> +#include <uhd/types/wb_iface.hpp> + +namespace uhd { namespace usrp { namespace gpio_atr { + +class gpio_atr_3000 : boost::noncopyable { +public: + typedef boost::shared_ptr<gpio_atr_3000> sptr; + + static const boost::uint32_t MASK_SET_ALL = 0xFFFFFFFF; + + virtual ~gpio_atr_3000(void) {}; + + /*! + * Create a read-write GPIO ATR interface object + * + * \param iface register iface to GPIO ATR registers + * \param base base settings offset for GPIO ATR registers + * \param base readback offset for GPIO ATR registers + */ + static sptr make( + uhd::wb_iface::sptr iface, + const uhd::wb_iface::wb_addr_type base, + const uhd::wb_iface::wb_addr_type rb_addr); + + /*! + * Create a write-only GPIO ATR interface object + * + * \param iface register iface to GPIO ATR registers + * \param base base settings offset for GPIO ATR registers + */ + static sptr make_write_only( + uhd::wb_iface::sptr iface, const uhd::wb_iface::wb_addr_type base); + + /*! + * Select the ATR mode for all bits in the mask + * + * \param mode the mode to apply {ATR = outputs driven by ATR state machine, GPIO = outputs static} + * \param mask apply the mode to all non-zero bits in the mask + */ + virtual void set_atr_mode(const gpio_atr_mode_t mode, const boost::uint32_t mask) = 0; + + /*! + * Select the data direction for all bits in the mask + * + * \param dir the direction {OUTPUT, INPUT} + * \param mask apply the mode to all non-zero bits in the mask + */ + virtual void set_gpio_ddr(const gpio_ddr_t dir, const boost::uint32_t mask) = 0; + + /*! + * Write the specified (masked) value to the ATR register + * + * \param atr the type of ATR register to write to {IDLE, RX, TX, FDX} + * \param value the value to write + * \param mask only writes to the bits where mask is non-zero + */ + virtual void set_atr_reg(const gpio_atr_reg_t atr, const boost::uint32_t value, const boost::uint32_t mask = MASK_SET_ALL) = 0; + + /*! + * Write to a static GPIO output + * + * \param value the value to write + * \param mask only writes to the bits where mask is non-zero + */ + virtual void set_gpio_out(const boost::uint32_t value, const boost::uint32_t mask = MASK_SET_ALL) = 0; + + /*! + * Read the state of the GPIO pins + * If a pin is configured as an input, reads the actual value of the pin + * If a pin is configured as an output, reads the last value written to the pin + * + * \return the value read back + */ + virtual boost::uint32_t read_gpio() = 0; + + /*! + * Set a GPIO attribute + * + * \param attr the attribute to set + * \param value the value to write to the attribute + */ + virtual void set_gpio_attr(const gpio_attr_t attr, const boost::uint32_t value) = 0; +}; + +class db_gpio_atr_3000 { +public: + typedef boost::shared_ptr<db_gpio_atr_3000> sptr; + + typedef uhd::usrp::dboard_iface::unit_t db_unit_t; + + virtual ~db_gpio_atr_3000(void) {}; + + /*! + * Create a read-write GPIO ATR interface object for a daughterboard connector + * + * \param iface register iface to GPIO ATR registers + * \param base base settings offset for GPIO ATR registers + * \param base readback offset for GPIO ATR registers + */ + static sptr make( + uhd::wb_iface::sptr iface, + const uhd::wb_iface::wb_addr_type base, + const uhd::wb_iface::wb_addr_type rb_addr); + + /*! + * Configure the GPIO mode for all pins in the daughterboard connector + * + * \param unit the side of the daughterboard interface to configure (TX or RX) + * \param value if value[i] is 1, the i'th bit is in ATR mode otherwise it is in GPIO mode + */ + virtual void set_pin_ctrl(const db_unit_t unit, const boost::uint16_t value) = 0; + + /*! + * Configure the direction for all pins in the daughterboard connector + * + * \param unit the side of the daughterboard interface to configure (TX or RX) + * \param value if value[i] is 1, the i'th bit is an output otherwise it is an input + */ + virtual void set_gpio_ddr(const db_unit_t unit, const boost::uint16_t value) = 0; + + /*! + * Write the specified value to the ATR register (all bits) + * + * \param atr the type of ATR register to write to {IDLE, RX, TX, FDX} + * \param unit the side of the daughterboard interface to configure (TX or RX) + * \param value the value to write + */ + virtual void set_atr_reg(const db_unit_t unit, const gpio_atr_reg_t atr, const boost::uint16_t value) = 0; + + /*! + * Write the specified value to the GPIO register (all bits) + * + * \param atr the type of ATR register to write to {IDLE, RX, TX, FDX} + * \param value the value to write + */ + virtual void set_gpio_out(const db_unit_t unit, const boost::uint16_t value) = 0; + + /*! + * Read the state of the GPIO pins + * If a pin is configured as an input, reads the actual value of the pin + * If a pin is configured as an output, reads the last value written to the pin + * + * \param unit the side of the daughterboard interface to configure (TX or RX) + * \return the value read back + */ + virtual boost::uint16_t read_gpio(const db_unit_t unit) = 0; +}; + +}}} //namespaces + +#endif /* INCLUDED_LIBUHD_USRP_GPIO_CORE_3000_HPP */ diff --git a/host/lib/usrp/cores/gpio_core_200.cpp b/host/lib/usrp/cores/gpio_core_200.cpp index 4f1c25a0b..05a689845 100644 --- a/host/lib/usrp/cores/gpio_core_200.cpp +++ b/host/lib/usrp/cores/gpio_core_200.cpp @@ -77,10 +77,10 @@ private: } void update(void){ - this->update(dboard_iface::ATR_REG_IDLE, REG_GPIO_IDLE); - this->update(dboard_iface::ATR_REG_TX_ONLY, REG_GPIO_TX_ONLY); - this->update(dboard_iface::ATR_REG_RX_ONLY, REG_GPIO_RX_ONLY); - this->update(dboard_iface::ATR_REG_FULL_DUPLEX, REG_GPIO_BOTH); + this->update(gpio_atr::ATR_REG_IDLE, REG_GPIO_IDLE); + this->update(gpio_atr::ATR_REG_TX_ONLY, REG_GPIO_TX_ONLY); + this->update(gpio_atr::ATR_REG_RX_ONLY, REG_GPIO_RX_ONLY); + this->update(gpio_atr::ATR_REG_FULL_DUPLEX, REG_GPIO_BOTH); } void update(const atr_reg_t atr, const size_t addr){ @@ -122,17 +122,17 @@ public: } void set_atr_reg(const atr_reg_t atr, const boost::uint32_t value){ - if (atr == dboard_iface::ATR_REG_IDLE) _iface->poke32(REG_GPIO_IDLE, value); - if (atr == dboard_iface::ATR_REG_TX_ONLY) _iface->poke32(REG_GPIO_TX_ONLY, value); - if (atr == dboard_iface::ATR_REG_RX_ONLY) _iface->poke32(REG_GPIO_RX_ONLY, value); - if (atr == dboard_iface::ATR_REG_FULL_DUPLEX) _iface->poke32(REG_GPIO_BOTH, value); + if (atr == gpio_atr::ATR_REG_IDLE) _iface->poke32(REG_GPIO_IDLE, value); + if (atr == gpio_atr::ATR_REG_TX_ONLY) _iface->poke32(REG_GPIO_TX_ONLY, value); + if (atr == gpio_atr::ATR_REG_RX_ONLY) _iface->poke32(REG_GPIO_RX_ONLY, value); + if (atr == gpio_atr::ATR_REG_FULL_DUPLEX) _iface->poke32(REG_GPIO_BOTH, value); } void set_all_regs(const boost::uint32_t value){ - this->set_atr_reg(dboard_iface::ATR_REG_IDLE, value); - this->set_atr_reg(dboard_iface::ATR_REG_TX_ONLY, value); - this->set_atr_reg(dboard_iface::ATR_REG_RX_ONLY, value); - this->set_atr_reg(dboard_iface::ATR_REG_FULL_DUPLEX, value); + this->set_atr_reg(gpio_atr::ATR_REG_IDLE, value); + this->set_atr_reg(gpio_atr::ATR_REG_TX_ONLY, value); + this->set_atr_reg(gpio_atr::ATR_REG_RX_ONLY, value); + this->set_atr_reg(gpio_atr::ATR_REG_FULL_DUPLEX, value); } private: diff --git a/host/lib/usrp/cores/gpio_core_200.hpp b/host/lib/usrp/cores/gpio_core_200.hpp index e22834fd9..c60507792 100644 --- a/host/lib/usrp/cores/gpio_core_200.hpp +++ b/host/lib/usrp/cores/gpio_core_200.hpp @@ -20,6 +20,7 @@ #include <uhd/config.hpp> #include <uhd/usrp/dboard_iface.hpp> +#include <uhd/usrp/gpio_defs.hpp> #include <boost/assign.hpp> #include <boost/cstdint.hpp> #include <boost/utility.hpp> @@ -27,28 +28,6 @@ #include <uhd/types/wb_iface.hpp> #include <map> -typedef enum { - GPIO_CTRL, - GPIO_DDR, - GPIO_OUT, - GPIO_ATR_0X, - GPIO_ATR_RX, - GPIO_ATR_TX, - GPIO_ATR_XX -} gpio_attr_t; - -typedef std::map<gpio_attr_t,std::string> gpio_attr_map_t; -static const gpio_attr_map_t gpio_attr_map = - boost::assign::map_list_of - (GPIO_CTRL, "CTRL") - (GPIO_DDR, "DDR") - (GPIO_OUT, "OUT") - (GPIO_ATR_0X, "ATR_0X") - (GPIO_ATR_RX, "ATR_RX") - (GPIO_ATR_TX, "ATR_TX") - (GPIO_ATR_XX, "ATR_XX") -; - class gpio_core_200 : boost::noncopyable{ public: typedef boost::shared_ptr<gpio_core_200> sptr; diff --git a/host/lib/usrp/cores/tx_vita_core_3000.cpp b/host/lib/usrp/cores/tx_vita_core_3000.cpp index 71a2b7e21..c76b384d9 100644 --- a/host/lib/usrp/cores/tx_vita_core_3000.cpp +++ b/host/lib/usrp/cores/tx_vita_core_3000.cpp @@ -18,9 +18,11 @@ #include "tx_vita_core_3000.hpp" #include <uhd/utils/safe_call.hpp> -#define REG_CTRL_ERROR_POLICY _base + 0 -#define REG_DEFRAMER_CYCLE_FC_UPS _base + 2*4 + 0 -#define REG_DEFRAMER_PACKET_FC_UPS _base + 2*4 + 4 +#define REG_CTRL_ERROR_POLICY (_base + 0) +#define REG_FC_PRE_RADIO_RESP_BASE (_base + 2*4) +#define REG_FC_PRE_FIFO_RESP_BASE (_base + 4*4) +#define REG_CTRL_FC_CYCLE_OFFSET (0*4) +#define REG_CTRL_FC_PACKET_OFFSET (1*4) using namespace uhd; @@ -32,12 +34,22 @@ struct tx_vita_core_3000_impl : tx_vita_core_3000 { tx_vita_core_3000_impl( wb_iface::sptr iface, - const size_t base + const size_t base, + fc_monitor_loc fc_location ): _iface(iface), - _base(base) + _base(base), + _fc_base((fc_location==FC_PRE_RADIO or fc_location==FC_DEFAULT) ? + REG_FC_PRE_RADIO_RESP_BASE : REG_FC_PRE_FIFO_RESP_BASE), + _fc_location(fc_location) { - this->set_tick_rate(1); //init to non zero + if (fc_location != FC_DEFAULT) { + //Turn off the other FC monitoring module + const size_t other_fc_base = (fc_location==FC_PRE_RADIO) ? + REG_FC_PRE_FIFO_RESP_BASE : REG_FC_PRE_RADIO_RESP_BASE; + _iface->poke32(other_fc_base + REG_CTRL_FC_CYCLE_OFFSET, 0); + _iface->poke32(other_fc_base + REG_CTRL_FC_PACKET_OFFSET, 0); + } this->set_underflow_policy("next_packet"); this->clear(); } @@ -56,11 +68,6 @@ struct tx_vita_core_3000_impl : tx_vita_core_3000 this->set_underflow_policy(_policy); //clears the seq } - void set_tick_rate(const double rate) - { - _tick_rate = rate; - } - void set_underflow_policy(const std::string &policy) { if (policy == "next_packet") @@ -89,23 +96,35 @@ struct tx_vita_core_3000_impl : tx_vita_core_3000 void configure_flow_control(const size_t cycs_per_up, const size_t pkts_per_up) { - if (cycs_per_up == 0) _iface->poke32(REG_DEFRAMER_CYCLE_FC_UPS, 0); - else _iface->poke32(REG_DEFRAMER_CYCLE_FC_UPS, (1 << 31) | ((cycs_per_up) & 0xffffff)); + if (cycs_per_up == 0) _iface->poke32(_fc_base + REG_CTRL_FC_CYCLE_OFFSET, 0); + else _iface->poke32(_fc_base + REG_CTRL_FC_CYCLE_OFFSET, (1 << 31) | ((cycs_per_up) & 0xffffff)); - if (pkts_per_up == 0) _iface->poke32(REG_DEFRAMER_PACKET_FC_UPS, 0); - else _iface->poke32(REG_DEFRAMER_PACKET_FC_UPS, (1 << 31) | ((pkts_per_up) & 0xffff)); + if (pkts_per_up == 0) _iface->poke32(_fc_base + REG_CTRL_FC_PACKET_OFFSET, 0); + else _iface->poke32(_fc_base + REG_CTRL_FC_PACKET_OFFSET, (1 << 31) | ((pkts_per_up) & 0xffff)); } - wb_iface::sptr _iface; - const size_t _base; - double _tick_rate; - std::string _policy; + wb_iface::sptr _iface; + const size_t _base; + const size_t _fc_base; + std::string _policy; + fc_monitor_loc _fc_location; + }; tx_vita_core_3000::sptr tx_vita_core_3000::make( wb_iface::sptr iface, + const size_t base, + fc_monitor_loc fc_location +) +{ + return tx_vita_core_3000::sptr(new tx_vita_core_3000_impl(iface, base, fc_location)); +} + +tx_vita_core_3000::sptr tx_vita_core_3000::make_no_radio_buff( + wb_iface::sptr iface, const size_t base ) { - return tx_vita_core_3000::sptr(new tx_vita_core_3000_impl(iface, base)); + //No internal radio buffer so only pre-radio monitoring is supported. + return tx_vita_core_3000::sptr(new tx_vita_core_3000_impl(iface, base, FC_DEFAULT)); } diff --git a/host/lib/usrp/cores/tx_vita_core_3000.hpp b/host/lib/usrp/cores/tx_vita_core_3000.hpp index 4c0052d4f..bd0f20ba4 100644 --- a/host/lib/usrp/cores/tx_vita_core_3000.hpp +++ b/host/lib/usrp/cores/tx_vita_core_3000.hpp @@ -32,17 +32,27 @@ class tx_vita_core_3000 : boost::noncopyable public: typedef boost::shared_ptr<tx_vita_core_3000> sptr; + enum fc_monitor_loc { + FC_DEFAULT, + FC_PRE_RADIO, + FC_PRE_FIFO + }; + virtual ~tx_vita_core_3000(void) = 0; static sptr make( uhd::wb_iface::sptr iface, + const size_t base, + fc_monitor_loc fc_location = FC_PRE_RADIO + ); + + static sptr make_no_radio_buff( + uhd::wb_iface::sptr iface, const size_t base ); virtual void clear(void) = 0; - virtual void set_tick_rate(const double rate) = 0; - virtual void setup(const uhd::stream_args_t &stream_args) = 0; virtual void configure_flow_control(const size_t cycs_per_up, const size_t pkts_per_up) = 0; diff --git a/host/lib/usrp/dboard/db_rfx.cpp b/host/lib/usrp/dboard/db_rfx.cpp index 1342c913d..3e7df9a39 100644 --- a/host/lib/usrp/dboard/db_rfx.cpp +++ b/host/lib/usrp/dboard/db_rfx.cpp @@ -248,15 +248,15 @@ rfx_xcvr::rfx_xcvr( this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, output_enables); //setup the tx atr (this does not change with antenna) - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, _power_up | ANT_XX | MIXER_DIS); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, _power_up | ANT_RX | MIXER_DIS); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_TX | MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE, _power_up | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY, _power_up | ANT_RX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_TX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB); //setup the rx atr (this does not change with antenna) - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, _power_up | ANT_XX | MIXER_DIS); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_XX | MIXER_DIS); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, _power_up | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB); } rfx_xcvr::~rfx_xcvr(void){ @@ -272,14 +272,14 @@ void rfx_xcvr::set_rx_ant(const std::string &ant){ //set the rx atr regs that change with antenna setting if (ant == "CAL") { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_TXRX | MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_TXRX | MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, _power_up | MIXER_ENB | ANT_TXRX ); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_TXRX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_TXRX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, _power_up | MIXER_ENB | ANT_TXRX ); } else { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_XX | MIXER_DIS); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, _power_up | MIXER_ENB | + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, _power_up | MIXER_ENB | ((ant == "TX/RX")? ANT_TXRX : ANT_RX2)); } @@ -292,12 +292,12 @@ void rfx_xcvr::set_tx_ant(const std::string &ant){ //set the tx atr regs that change with antenna setting if (ant == "CAL") { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_RX | MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_RX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX | MIXER_ENB); } else { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_TX | MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_TX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB); } } diff --git a/host/lib/usrp/dboard/db_sbx_common.cpp b/host/lib/usrp/dboard/db_sbx_common.cpp index ce5166c4c..c575bba01 100644 --- a/host/lib/usrp/dboard/db_sbx_common.cpp +++ b/host/lib/usrp/dboard/db_sbx_common.cpp @@ -237,8 +237,8 @@ sbx_xcvr::sbx_xcvr(ctor_args_t args) : xcvr_dboard_base(args){ this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, (TXIO_MASK|TX_LED_IO)); this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO)); - //flash LEDs - flash_leds(); + //Initialize ATR registers after direction and pin ctrl configuration + update_atr(); UHD_LOGV(often) << boost::format( "SBX GPIO Direction: RX: 0x%08x, TX: 0x%08x" @@ -265,39 +265,39 @@ void sbx_xcvr::update_atr(void){ //setup the tx atr (this does not change with antenna) this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_IDLE, 0 | tx_lo_lpf_en \ + gpio_atr::ATR_REG_IDLE, 0 | tx_lo_lpf_en \ | tx_ld_led | tx_ant_led | TX_POWER_UP | ANT_XX | TX_MIXER_DIS); //setup the rx atr (this does not change with antenna) this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_IDLE, rx_pga0_iobits | rx_lo_lpf_en \ + gpio_atr::ATR_REG_IDLE, rx_pga0_iobits | rx_lo_lpf_en \ | rx_ld_led | rx_ant_led | RX_POWER_UP | ANT_XX | RX_MIXER_DIS); //set the RX atr regs that change with antenna setting this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_RX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \ + gpio_atr::ATR_REG_RX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \ | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB \ | ((_rx_ant != "RX2")? ANT_TXRX : ANT_RX2)); this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_TX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \ + gpio_atr::ATR_REG_TX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \ | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_DIS \ | ((_rx_ant == "CAL")? ANT_TXRX : ANT_RX2)); this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_FULL_DUPLEX, rx_pga0_iobits | rx_lo_lpf_en \ + gpio_atr::ATR_REG_FULL_DUPLEX, rx_pga0_iobits | rx_lo_lpf_en \ | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB \ | ((_rx_ant == "CAL")? ANT_TXRX : ANT_RX2)); //set the TX atr regs that change with antenna setting this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_RX_ONLY, 0 | tx_lo_lpf_en \ + gpio_atr::ATR_REG_RX_ONLY, 0 | tx_lo_lpf_en \ | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_DIS \ | ((_rx_ant != "RX2")? ANT_RX : ANT_TX)); this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_TX_ONLY, tx_pga0_iobits | tx_lo_lpf_en \ + gpio_atr::ATR_REG_TX_ONLY, tx_pga0_iobits | tx_lo_lpf_en \ | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_ENB \ | ((_tx_ant == "CAL")? ANT_RX : ANT_TX)); this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_FULL_DUPLEX, tx_pga0_iobits | tx_lo_lpf_en \ + gpio_atr::ATR_REG_FULL_DUPLEX, tx_pga0_iobits | tx_lo_lpf_en \ | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_ENB \ | ((_tx_ant == "CAL")? ANT_RX : ANT_TX)); } @@ -352,45 +352,3 @@ sensor_value_t sbx_xcvr::get_locked(dboard_iface::unit_t unit) { return sensor_value_t("LO", locked, "locked", "unlocked"); } - - -void sbx_xcvr::flash_leds(void) { - //Remove LED gpios from ATR control temporarily and set to outputs - this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_TX, TXIO_MASK); - this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, RXIO_MASK); - this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, (TXIO_MASK|RX_LED_IO)); - this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_LD, TX_LED_IO); - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, \ - TX_LED_TXRX|TX_LED_LD, TX_LED_IO); - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_LD, RX_LED_IO); - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, \ - RX_LED_RX1RX2|RX_LED_LD, RX_LED_IO); - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_LD, RX_LED_IO); - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, 0, RX_LED_IO); - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_LD, TX_LED_IO); - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, 0, TX_LED_IO); - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - //Put LED gpios back in ATR control and update atr - this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_TX, (TXIO_MASK|TX_LED_IO)); - this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO)); - this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, (TXIO_MASK|TX_LED_IO)); - this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO)); -} - diff --git a/host/lib/usrp/dboard/db_ubx.cpp b/host/lib/usrp/dboard/db_ubx.cpp index 7cb4b2d6b..db9f21f43 100644 --- a/host/lib/usrp/dboard/db_ubx.cpp +++ b/host/lib/usrp/dboard/db_ubx.cpp @@ -26,6 +26,7 @@ #include <uhd/usrp/dboard_manager.hpp> #include <uhd/utils/assert_has.hpp> #include <uhd/utils/log.hpp> +#include <uhd/utils/msg.hpp> #include <uhd/utils/static.hpp> #include <boost/assign/list_of.hpp> #include <boost/shared_ptr.hpp> @@ -318,14 +319,14 @@ public: write_gpio(); // Configure ATR - _iface->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, _tx_gpio_reg.atr_idle); - _iface->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, _tx_gpio_reg.atr_tx); - _iface->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, _tx_gpio_reg.atr_rx); - _iface->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _tx_gpio_reg.atr_full_duplex); - _iface->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, _rx_gpio_reg.atr_idle); - _iface->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, _rx_gpio_reg.atr_tx); - _iface->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, _rx_gpio_reg.atr_rx); - _iface->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _rx_gpio_reg.atr_full_duplex); + _iface->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE, _tx_gpio_reg.atr_idle); + _iface->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, _tx_gpio_reg.atr_tx); + _iface->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY, _tx_gpio_reg.atr_rx); + _iface->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, _tx_gpio_reg.atr_full_duplex); + _iface->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, _rx_gpio_reg.atr_idle); + _iface->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, _rx_gpio_reg.atr_tx); + _iface->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, _rx_gpio_reg.atr_rx); + _iface->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, _rx_gpio_reg.atr_full_duplex); // Engage ATR control (1 is ATR control, 0 is manual control) _iface->set_pin_ctrl(dboard_iface::UNIT_TX, _tx_gpio_reg.atr_mask); @@ -683,6 +684,20 @@ private: device_addr_t tune_args = subtree->access<device_addr_t>("tune_args").get(); is_int_n = boost::iequals(tune_args.get("mode_n",""), "integer"); UHD_LOGV(rarely) << boost::format("UBX TX: the requested frequency is %f MHz") % (freq/1e6) << std::endl; + double target_pfd_freq = _tx_target_pfd_freq; + if (is_int_n and tune_args.has_key("int_n_step")) + { + target_pfd_freq = tune_args.cast<double>("int_n_step", _tx_target_pfd_freq); + if (target_pfd_freq > _tx_target_pfd_freq) + { + UHD_MSG(warning) + << boost::format("Requested int_n_step of %f MHz too large, clipping to %f MHz") + % (target_pfd_freq/1e6) + % (_tx_target_pfd_freq/1e6) + << std::endl; + target_pfd_freq = _tx_target_pfd_freq; + } + } // Clip the frequency to the valid range freq = ubx_freq_range.clip(freq); @@ -704,10 +719,10 @@ private: set_cpld_field(TXLB_SEL, 1); set_cpld_field(TXHB_SEL, 0); // Set LO1 to IF of 2100 MHz (offset from RX IF to reduce leakage) - freq_lo1 = _txlo1->set_frequency(2100*fMHz, ref_freq, _tx_target_pfd_freq, is_int_n); + freq_lo1 = _txlo1->set_frequency(2100*fMHz, ref_freq, target_pfd_freq, is_int_n); _txlo1->set_output_power(max287x_iface::OUTPUT_POWER_5DBM); // Set LO2 to IF minus desired frequency - freq_lo2 = _txlo2->set_frequency(freq_lo1 - freq, ref_freq, _tx_target_pfd_freq, is_int_n); + freq_lo2 = _txlo2->set_frequency(freq_lo1 - freq, ref_freq, target_pfd_freq, is_int_n); _txlo2->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq >= (500*fMHz)) && (freq <= (800*fMHz))) @@ -717,7 +732,7 @@ private: set_cpld_field(TXLO1_FSEL1, 1); set_cpld_field(TXLB_SEL, 0); set_cpld_field(TXHB_SEL, 1); - freq_lo1 = _txlo1->set_frequency(freq, ref_freq, _tx_target_pfd_freq, is_int_n); + freq_lo1 = _txlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _txlo1->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq > (800*fMHz)) && (freq <= (1000*fMHz))) @@ -727,7 +742,7 @@ private: set_cpld_field(TXLO1_FSEL1, 1); set_cpld_field(TXLB_SEL, 0); set_cpld_field(TXHB_SEL, 1); - freq_lo1 = _txlo1->set_frequency(freq, ref_freq, _tx_target_pfd_freq, is_int_n); + freq_lo1 = _txlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _txlo1->set_output_power(max287x_iface::OUTPUT_POWER_5DBM); } else if ((freq > (1000*fMHz)) && (freq <= (2200*fMHz))) @@ -737,7 +752,7 @@ private: set_cpld_field(TXLO1_FSEL1, 0); set_cpld_field(TXLB_SEL, 0); set_cpld_field(TXHB_SEL, 1); - freq_lo1 = _txlo1->set_frequency(freq, ref_freq, _tx_target_pfd_freq, is_int_n); + freq_lo1 = _txlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _txlo1->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq > (2200*fMHz)) && (freq <= (2500*fMHz))) @@ -747,7 +762,7 @@ private: set_cpld_field(TXLO1_FSEL1, 0); set_cpld_field(TXLB_SEL, 0); set_cpld_field(TXHB_SEL, 1); - freq_lo1 = _txlo1->set_frequency(freq, ref_freq, _tx_target_pfd_freq, is_int_n); + freq_lo1 = _txlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _txlo1->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq > (2500*fMHz)) && (freq <= (6000*fMHz))) @@ -757,7 +772,7 @@ private: set_cpld_field(TXLO1_FSEL1, 0); set_cpld_field(TXLB_SEL, 0); set_cpld_field(TXHB_SEL, 1); - freq_lo1 = _txlo1->set_frequency(freq, ref_freq, _tx_target_pfd_freq, is_int_n); + freq_lo1 = _txlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _txlo1->set_output_power(max287x_iface::OUTPUT_POWER_5DBM); } @@ -825,6 +840,20 @@ private: property_tree::sptr subtree = this->get_rx_subtree(); device_addr_t tune_args = subtree->access<device_addr_t>("tune_args").get(); is_int_n = boost::iequals(tune_args.get("mode_n",""), "integer"); + double target_pfd_freq = _rx_target_pfd_freq; + if (is_int_n and tune_args.has_key("int_n_step")) + { + target_pfd_freq = tune_args.cast<double>("int_n_step", _rx_target_pfd_freq); + if (target_pfd_freq > _rx_target_pfd_freq) + { + UHD_MSG(warning) + << boost::format("Requested int_n_step of %f Mhz too large, clipping to %f MHz") + % (target_pfd_freq/1e6) + % (_rx_target_pfd_freq/1e6) + << std::endl; + target_pfd_freq = _rx_target_pfd_freq; + } + } // Clip the frequency to the valid range freq = ubx_freq_range.clip(freq); @@ -848,10 +877,10 @@ private: set_cpld_field(RXLB_SEL, 1); set_cpld_field(RXHB_SEL, 0); // Set LO1 to IF of 2380 MHz (2440 MHz filter center minus 60 MHz offset to minimize LO leakage) - freq_lo1 = _rxlo1->set_frequency(2380*fMHz, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo1 = _rxlo1->set_frequency(2380*fMHz, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_5DBM); // Set LO2 to IF minus desired frequency - freq_lo2 = _rxlo2->set_frequency(freq_lo1 - freq, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo2 = _rxlo2->set_frequency(freq_lo1 - freq, ref_freq, target_pfd_freq, is_int_n); _rxlo2->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq >= 100*fMHz) && (freq < 500*fMHz)) @@ -864,10 +893,10 @@ private: set_cpld_field(RXLB_SEL, 1); set_cpld_field(RXHB_SEL, 0); // Set LO1 to IF of 2440 (center of filter) - freq_lo1 = _rxlo1->set_frequency(2440*fMHz, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo1 = _rxlo1->set_frequency(2440*fMHz, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_5DBM); // Set LO2 to IF minus desired frequency - freq_lo2 = _rxlo2->set_frequency(freq_lo1 - freq, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo2 = _rxlo2->set_frequency(freq_lo1 - freq, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq >= 500*fMHz) && (freq < 800*fMHz)) @@ -879,7 +908,7 @@ private: set_cpld_field(RXLO1_FSEL1, 1); set_cpld_field(RXLB_SEL, 0); set_cpld_field(RXHB_SEL, 1); - freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq >= 800*fMHz) && (freq < 1000*fMHz)) @@ -891,7 +920,7 @@ private: set_cpld_field(RXLO1_FSEL1, 1); set_cpld_field(RXLB_SEL, 0); set_cpld_field(RXHB_SEL, 1); - freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_5DBM); } else if ((freq >= 1000*fMHz) && (freq < 1500*fMHz)) @@ -903,7 +932,7 @@ private: set_cpld_field(RXLO1_FSEL1, 0); set_cpld_field(RXLB_SEL, 0); set_cpld_field(RXHB_SEL, 1); - freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq >= 1500*fMHz) && (freq < 2200*fMHz)) @@ -915,7 +944,7 @@ private: set_cpld_field(RXLO1_FSEL1, 0); set_cpld_field(RXLB_SEL, 0); set_cpld_field(RXHB_SEL, 1); - freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq >= 2200*fMHz) && (freq < 2500*fMHz)) @@ -927,7 +956,7 @@ private: set_cpld_field(RXLO1_FSEL1, 0); set_cpld_field(RXLB_SEL, 0); set_cpld_field(RXHB_SEL, 1); - freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq >= 2500*fMHz) && (freq <= 6000*fMHz)) @@ -939,7 +968,7 @@ private: set_cpld_field(RXLO1_FSEL1, 0); set_cpld_field(RXLB_SEL, 0); set_cpld_field(RXHB_SEL, 1); - freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_5DBM); } diff --git a/host/lib/usrp/dboard/db_wbx_simple.cpp b/host/lib/usrp/dboard/db_wbx_simple.cpp index c8f2be155..dda2def95 100644 --- a/host/lib/usrp/dboard/db_wbx_simple.cpp +++ b/host/lib/usrp/dboard/db_wbx_simple.cpp @@ -112,14 +112,14 @@ wbx_simple::wbx_simple(ctor_args_t args) : wbx_base(args){ this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, ANTSW_IO, ANTSW_IO); //setup ATR for the antenna switches (constant) - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, ANT_RX, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, ANT_RX, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, ANT_TX, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_TX, ANTSW_IO); - - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, ANT_TXRX, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, ANT_RX2, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_RX2, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE, ANT_RX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY, ANT_RX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, ANT_TX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_TX, ANTSW_IO); + + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, ANT_TXRX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, ANT_RX2, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_RX2, ANTSW_IO); } wbx_simple::~wbx_simple(void){ @@ -138,14 +138,14 @@ void wbx_simple::set_rx_ant(const std::string &ant){ //write the new antenna setting to atr regs if (_rx_ant == "CAL") { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, ANT_TXRX, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_TXRX, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, ANT_TXRX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, ANT_TXRX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_TXRX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, ANT_TXRX, ANTSW_IO); } else { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, ANT_RX2, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_RX2, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, ((_rx_ant == "TX/RX")? ANT_TXRX : ANT_RX2), ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, ANT_RX2, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_RX2, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, ((_rx_ant == "TX/RX")? ANT_TXRX : ANT_RX2), ANTSW_IO); } } @@ -154,11 +154,11 @@ void wbx_simple::set_tx_ant(const std::string &ant){ //write the new antenna setting to atr regs if (ant == "CAL") { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, ANT_RX, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_RX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, ANT_RX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_RX, ANTSW_IO); } else { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, ANT_TX, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_TX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, ANT_TX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_TX, ANTSW_IO); } } diff --git a/host/lib/usrp/dboard/db_wbx_version2.cpp b/host/lib/usrp/dboard/db_wbx_version2.cpp index 93047fb7a..78b5b2871 100644 --- a/host/lib/usrp/dboard/db_wbx_version2.cpp +++ b/host/lib/usrp/dboard/db_wbx_version2.cpp @@ -117,15 +117,15 @@ wbx_base::wbx_version2::wbx_version2(wbx_base *_self_wbx_base) { self_base->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, RX_PUP_5V|RX_PUP_3V|ADF435X_CE|RXBB_PDB|ADF435X_PDBRF|RX_ATTN_MASK); //setup ATR for the mixer enables (always enabled to prevent phase slip between bursts) - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod); - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod); - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod); - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod); - - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod); + + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); } wbx_base::wbx_version2::~wbx_version2(void){ diff --git a/host/lib/usrp/dboard/db_wbx_version3.cpp b/host/lib/usrp/dboard/db_wbx_version3.cpp index 6927ae4e4..a5821ffc2 100644 --- a/host/lib/usrp/dboard/db_wbx_version3.cpp +++ b/host/lib/usrp/dboard/db_wbx_version3.cpp @@ -129,29 +129,29 @@ wbx_base::wbx_version3::wbx_version3(wbx_base *_self_wbx_base) { //slip between bursts). set TX gain iobits to min gain (max attenuation) //when RX_ONLY or IDLE to suppress LO leakage self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_IDLE, v3_tx_mod, \ + gpio_atr::ATR_REG_IDLE, v3_tx_mod, \ TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_RX_ONLY, v3_tx_mod, \ + gpio_atr::ATR_REG_RX_ONLY, v3_tx_mod, \ TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_TX_ONLY, v3_tx_mod, \ + gpio_atr::ATR_REG_TX_ONLY, v3_tx_mod, \ TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_FULL_DUPLEX, v3_tx_mod, \ + gpio_atr::ATR_REG_FULL_DUPLEX, v3_tx_mod, \ TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_IDLE, \ + gpio_atr::ATR_REG_IDLE, \ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_TX_ONLY, \ + gpio_atr::ATR_REG_TX_ONLY, \ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_RX_ONLY, \ + gpio_atr::ATR_REG_RX_ONLY, \ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_FULL_DUPLEX, \ + gpio_atr::ATR_REG_FULL_DUPLEX, \ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); } @@ -181,8 +181,8 @@ double wbx_base::wbx_version3::set_tx_gain(double gain, const std::string &name) //write the new gain to tx gpio outputs //Update ATR with gain io_bits, only update for TX_ONLY and FULL_DUPLEX ATR states - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, io_bits, TX_ATTN_MASK); - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, io_bits, TX_ATTN_MASK); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, io_bits, TX_ATTN_MASK); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, io_bits, TX_ATTN_MASK); } else UHD_THROW_INVALID_CODE_PATH(); return self_base->_tx_gains[name]; //shadow diff --git a/host/lib/usrp/dboard/db_wbx_version4.cpp b/host/lib/usrp/dboard/db_wbx_version4.cpp index 81cdaefac..327ae675b 100644 --- a/host/lib/usrp/dboard/db_wbx_version4.cpp +++ b/host/lib/usrp/dboard/db_wbx_version4.cpp @@ -136,29 +136,29 @@ wbx_base::wbx_version4::wbx_version4(wbx_base *_self_wbx_base) { //between bursts) set TX gain iobits to min gain (max attenuation) when //RX_ONLY or IDLE to suppress LO leakage self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_IDLE, v4_tx_mod, \ + gpio_atr::ATR_REG_IDLE, v4_tx_mod, \ TX_ATTN_MASK | TX_MIXER_DIS | v4_tx_mod); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_RX_ONLY, v4_tx_mod, \ + gpio_atr::ATR_REG_RX_ONLY, v4_tx_mod, \ TX_ATTN_MASK | TX_MIXER_DIS | v4_tx_mod); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_TX_ONLY, v4_tx_mod, \ + gpio_atr::ATR_REG_TX_ONLY, v4_tx_mod, \ TX_ATTN_MASK | TX_MIXER_DIS | v4_tx_mod); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_FULL_DUPLEX, v4_tx_mod, \ + gpio_atr::ATR_REG_FULL_DUPLEX, v4_tx_mod, \ TX_ATTN_MASK | TX_MIXER_DIS | v4_tx_mod); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_IDLE, \ + gpio_atr::ATR_REG_IDLE, \ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_TX_ONLY, \ + gpio_atr::ATR_REG_TX_ONLY, \ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_RX_ONLY, \ + gpio_atr::ATR_REG_RX_ONLY, \ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_FULL_DUPLEX, \ + gpio_atr::ATR_REG_FULL_DUPLEX, \ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); } @@ -188,8 +188,8 @@ double wbx_base::wbx_version4::set_tx_gain(double gain, const std::string &name) //write the new gain to tx gpio outputs //Update ATR with gain io_bits, only update for TX_ONLY and FULL_DUPLEX ATR states - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, io_bits, TX_ATTN_MASK); - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, io_bits, TX_ATTN_MASK); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, io_bits, TX_ATTN_MASK); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, io_bits, TX_ATTN_MASK); } else UHD_THROW_INVALID_CODE_PATH(); diff --git a/host/lib/usrp/dboard/db_xcvr2450.cpp b/host/lib/usrp/dboard/db_xcvr2450.cpp index 50c67991a..092f84548 100644 --- a/host/lib/usrp/dboard/db_xcvr2450.cpp +++ b/host/lib/usrp/dboard/db_xcvr2450.cpp @@ -315,12 +315,12 @@ xcvr2450::~xcvr2450(void){ void xcvr2450::spi_reset(void){ //spi reset mode: global enable = off, tx and rx enable = on - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, TX_ENB_TXIO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, RX_ENB_RXIO | POWER_DOWN_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE, TX_ENB_TXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, RX_ENB_RXIO | POWER_DOWN_RXIO); boost::this_thread::sleep(boost::posix_time::milliseconds(10)); //take it back out of spi reset mode and wait a bit - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, RX_DIS_RXIO | POWER_UP_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, RX_DIS_RXIO | POWER_UP_RXIO); boost::this_thread::sleep(boost::posix_time::milliseconds(10)); } @@ -337,16 +337,16 @@ void xcvr2450::update_atr(void){ int ad9515div = (_ad9515div == 3)? AD9515DIV_3_TXIO : AD9515DIV_2_TXIO; //set the tx registers - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, band_sel | ad9515div | TX_DIS_TXIO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, band_sel | ad9515div | TX_DIS_TXIO | rx_ant_sel); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, band_sel | ad9515div | TX_ENB_TXIO | tx_ant_sel); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, band_sel | ad9515div | TX_ENB_TXIO | xx_ant_sel); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE, band_sel | ad9515div | TX_DIS_TXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY, band_sel | ad9515div | TX_DIS_TXIO | rx_ant_sel); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, band_sel | ad9515div | TX_ENB_TXIO | tx_ant_sel); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, band_sel | ad9515div | TX_ENB_TXIO | xx_ant_sel); //set the rx registers - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, POWER_UP_RXIO | RX_DIS_RXIO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, POWER_UP_RXIO | RX_ENB_RXIO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, POWER_UP_RXIO | RX_DIS_RXIO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, POWER_UP_RXIO | RX_DIS_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, POWER_UP_RXIO | RX_DIS_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, POWER_UP_RXIO | RX_ENB_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, POWER_UP_RXIO | RX_DIS_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, POWER_UP_RXIO | RX_DIS_RXIO); } /*********************************************************************** diff --git a/host/lib/usrp/e300/e300_fpga_defs.hpp b/host/lib/usrp/e300/e300_fpga_defs.hpp index a8fa60d9d..3b21468ba 100644 --- a/host/lib/usrp/e300/e300_fpga_defs.hpp +++ b/host/lib/usrp/e300/e300_fpga_defs.hpp @@ -21,7 +21,7 @@ namespace uhd { namespace usrp { namespace e300 { namespace fpga { static const size_t NUM_RADIOS = 2; -static const boost::uint32_t COMPAT_MAJOR = 11; +static const boost::uint32_t COMPAT_MAJOR = 12; static const boost::uint32_t COMPAT_MINOR = 0; }}}} // namespace diff --git a/host/lib/usrp/e300/e300_impl.cpp b/host/lib/usrp/e300/e300_impl.cpp index 6d66e83c0..c82ab3d0e 100644 --- a/host/lib/usrp/e300/e300_impl.cpp +++ b/host/lib/usrp/e300/e300_impl.cpp @@ -48,6 +48,7 @@ using namespace uhd; using namespace uhd::usrp; +using namespace uhd::usrp::gpio_atr; using namespace uhd::transport; namespace fs = boost::filesystem; namespace asio = boost::asio; @@ -512,15 +513,15 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr) //////////////////////////////////////////////////////////////////// // internal gpios //////////////////////////////////////////////////////////////////// - gpio_core_200::sptr fp_gpio = gpio_core_200::make(_radio_perifs[0].ctrl, radio::sr_addr(radio::FP_GPIO), radio::RB32_FP_GPIO); + gpio_atr_3000::sptr fp_gpio = gpio_atr_3000::make(_radio_perifs[0].ctrl, radio::sr_addr(radio::FP_GPIO), radio::RB32_FP_GPIO); BOOST_FOREACH(const gpio_attr_map_t::value_type attr, gpio_attr_map) { _tree->create<boost::uint32_t>(mb_path / "gpio" / "INT0" / attr.second) - .subscribe(boost::bind(&e300_impl::_set_internal_gpio, this, fp_gpio, attr.first, _1)) + .subscribe(boost::bind(&gpio_atr_3000::set_gpio_attr, fp_gpio, attr.first, _1)) .set(0); } _tree->create<boost::uint8_t>(mb_path / "gpio" / "INT0" / "READBACK") - .publish(boost::bind(&e300_impl::_get_internal_gpio, this, fp_gpio)); + .publish(boost::bind(&gpio_atr_3000::read_gpio, fp_gpio)); //////////////////////////////////////////////////////////////////// @@ -623,37 +624,6 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr) _tree->access<subdev_spec_t>(mb_path / "tx_subdev_spec").set(tx_spec); } -boost::uint8_t e300_impl::_get_internal_gpio(gpio_core_200::sptr gpio) -{ - return boost::uint32_t(gpio->read_gpio(dboard_iface::UNIT_RX)); -} - -void e300_impl::_set_internal_gpio( - gpio_core_200::sptr gpio, - const gpio_attr_t attr, - const boost::uint32_t value) -{ - switch (attr) - { - case GPIO_CTRL: - return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value); - case GPIO_DDR: - return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value); - case GPIO_OUT: - return gpio->set_gpio_out(dboard_iface::UNIT_RX, value); - case GPIO_ATR_0X: - return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value); - case GPIO_ATR_RX: - return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value); - case GPIO_ATR_TX: - return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value); - case GPIO_ATR_XX: - return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value); - default: - UHD_THROW_INVALID_CODE_PATH(); - } -} - uhd::sensor_value_t e300_impl::_get_fe_pll_lock(const bool is_tx) { const boost::uint32_t st = @@ -978,7 +948,8 @@ void e300_impl::_setup_radio(const size_t dspno) //////////////////////////////////////////////////////////////////// // Set up peripherals //////////////////////////////////////////////////////////////////// - perif.atr = gpio_core_200_32wo::make(perif.ctrl, radio::sr_addr(radio::GPIO)); + perif.atr = gpio_atr_3000::make_write_only(perif.ctrl, radio::sr_addr(radio::GPIO)); + perif.atr->set_atr_mode(MODE_ATR, 0xFFFFFFFF); perif.rx_fe = rx_frontend_core_200::make(perif.ctrl, radio::sr_addr(radio::RX_FRONT)); perif.rx_fe->set_dc_offset(rx_frontend_core_200::DEFAULT_DC_OFFSET_VALUE); perif.rx_fe->set_dc_offset_auto(rx_frontend_core_200::DEFAULT_DC_OFFSET_ENABLE); @@ -1027,7 +998,6 @@ void e300_impl::_setup_radio(const size_t dspno) // create tx dsp control objects //////////////////////////////////////////////////////////////////// _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&tx_vita_core_3000::set_tick_rate, perif.deframer, _1)) .subscribe(boost::bind(&tx_dsp_core_3000::set_tick_rate, perif.duc, _1)); const fs_path tx_dsp_path = mb_path / "tx_dsps" / str(boost::format("%u") % dspno); perif.duc->populate_subtree(_tree->subtree(tx_dsp_path)); @@ -1291,11 +1261,11 @@ void e300_impl::_update_atrs(void) if (enb_tx) fd_reg |= tx_enables | xx_leds; - gpio_core_200_32wo::sptr atr = _radio_perifs[instance].atr; - atr->set_atr_reg(dboard_iface::ATR_REG_IDLE, oo_reg); - atr->set_atr_reg(dboard_iface::ATR_REG_RX_ONLY, rx_reg); - atr->set_atr_reg(dboard_iface::ATR_REG_TX_ONLY, tx_reg); - atr->set_atr_reg(dboard_iface::ATR_REG_FULL_DUPLEX, fd_reg); + gpio_atr_3000::sptr atr = _radio_perifs[instance].atr; + atr->set_atr_reg(ATR_REG_IDLE, oo_reg); + atr->set_atr_reg(ATR_REG_RX_ONLY, rx_reg); + atr->set_atr_reg(ATR_REG_TX_ONLY, tx_reg); + atr->set_atr_reg(ATR_REG_FULL_DUPLEX, fd_reg); } } diff --git a/host/lib/usrp/e300/e300_impl.hpp b/host/lib/usrp/e300/e300_impl.hpp index 8aff51466..9b39c7468 100644 --- a/host/lib/usrp/e300/e300_impl.hpp +++ b/host/lib/usrp/e300/e300_impl.hpp @@ -41,7 +41,7 @@ #include "tx_dsp_core_3000.hpp" #include "ad9361_ctrl.hpp" #include "ad936x_manager.hpp" -#include "gpio_core_200.hpp" +#include "gpio_atr_3000.hpp" #include "e300_global_regs.hpp" #include "e300_i2c.hpp" @@ -146,7 +146,7 @@ private: // types struct radio_perifs_t { radio_ctrl_core_3000::sptr ctrl; - gpio_core_200_32wo::sptr atr; + gpio_atr::gpio_atr_3000::sptr atr; time_core_3000::sptr time64; rx_vita_core_3000::sptr framer; rx_dsp_core_3000::sptr ddc; @@ -277,14 +277,6 @@ private: // methods // get frontend lock sensor uhd::sensor_value_t _get_fe_pll_lock(const bool is_tx); - // internal gpios - boost::uint8_t _get_internal_gpio(gpio_core_200::sptr); - - void _set_internal_gpio( - gpio_core_200::sptr gpio, - const gpio_attr_t attr, - const boost::uint32_t value); - private: // members uhd::device_addr_t _device_addr; xport_t _xport_path; diff --git a/host/lib/usrp/e300/e300_io_impl.cpp b/host/lib/usrp/e300/e300_io_impl.cpp index 29d250c8f..209a73077 100644 --- a/host/lib/usrp/e300/e300_io_impl.cpp +++ b/host/lib/usrp/e300/e300_io_impl.cpp @@ -87,7 +87,6 @@ void e300_impl::_update_tick_rate(const double rate) boost::dynamic_pointer_cast<sph::send_packet_streamer>(perif.tx_streamer.lock()); if (my_streamer) my_streamer->set_tick_rate(rate); - perif.deframer->set_tick_rate(_tick_rate); } } diff --git a/host/lib/usrp/multi_usrp.cpp b/host/lib/usrp/multi_usrp.cpp index 396237e24..dbc0ebed2 100644 --- a/host/lib/usrp/multi_usrp.cpp +++ b/host/lib/usrp/multi_usrp.cpp @@ -438,8 +438,10 @@ public: ******************************************************************/ void set_master_clock_rate(double rate, size_t mboard){ if (mboard != ALL_MBOARDS){ - if (_tree->exists(mb_root(mboard) / "auto_tick_rate")) { + if (_tree->exists(mb_root(mboard) / "auto_tick_rate") + and _tree->access<bool>(mb_root(mboard) / "auto_tick_rate").get()) { _tree->access<bool>(mb_root(mboard) / "auto_tick_rate").set(false); + UHD_MSG(status) << "Setting master clock rate selection to 'manual'." << std::endl; } _tree->access<double>(mb_root(mboard) / "tick_rate").set(rate); return; @@ -1346,10 +1348,10 @@ public: if (attr == "CTRL") iface->set_pin_ctrl(unit, boost::uint16_t(value), boost::uint16_t(mask)); if (attr == "DDR") iface->set_gpio_ddr(unit, boost::uint16_t(value), boost::uint16_t(mask)); if (attr == "OUT") iface->set_gpio_out(unit, boost::uint16_t(value), boost::uint16_t(mask)); - if (attr == "ATR_0X") iface->set_atr_reg(unit, dboard_iface::ATR_REG_IDLE, boost::uint16_t(value), boost::uint16_t(mask)); - if (attr == "ATR_RX") iface->set_atr_reg(unit, dboard_iface::ATR_REG_RX_ONLY, boost::uint16_t(value), boost::uint16_t(mask)); - if (attr == "ATR_TX") iface->set_atr_reg(unit, dboard_iface::ATR_REG_TX_ONLY, boost::uint16_t(value), boost::uint16_t(mask)); - if (attr == "ATR_XX") iface->set_atr_reg(unit, dboard_iface::ATR_REG_FULL_DUPLEX, boost::uint16_t(value), boost::uint16_t(mask)); + if (attr == "ATR_0X") iface->set_atr_reg(unit, gpio_atr::ATR_REG_IDLE, boost::uint16_t(value), boost::uint16_t(mask)); + if (attr == "ATR_RX") iface->set_atr_reg(unit, gpio_atr::ATR_REG_RX_ONLY, boost::uint16_t(value), boost::uint16_t(mask)); + if (attr == "ATR_TX") iface->set_atr_reg(unit, gpio_atr::ATR_REG_TX_ONLY, boost::uint16_t(value), boost::uint16_t(mask)); + if (attr == "ATR_XX") iface->set_atr_reg(unit, gpio_atr::ATR_REG_FULL_DUPLEX, boost::uint16_t(value), boost::uint16_t(mask)); } } @@ -1367,10 +1369,10 @@ public: if (attr == "CTRL") return iface->get_pin_ctrl(unit); if (attr == "DDR") return iface->get_gpio_ddr(unit); if (attr == "OUT") return iface->get_gpio_out(unit); - if (attr == "ATR_0X") return iface->get_atr_reg(unit, dboard_iface::ATR_REG_IDLE); - if (attr == "ATR_RX") return iface->get_atr_reg(unit, dboard_iface::ATR_REG_RX_ONLY); - if (attr == "ATR_TX") return iface->get_atr_reg(unit, dboard_iface::ATR_REG_TX_ONLY); - if (attr == "ATR_XX") return iface->get_atr_reg(unit, dboard_iface::ATR_REG_FULL_DUPLEX); + if (attr == "ATR_0X") return iface->get_atr_reg(unit, gpio_atr::ATR_REG_IDLE); + if (attr == "ATR_RX") return iface->get_atr_reg(unit, gpio_atr::ATR_REG_RX_ONLY); + if (attr == "ATR_TX") return iface->get_atr_reg(unit, gpio_atr::ATR_REG_TX_ONLY); + if (attr == "ATR_XX") return iface->get_atr_reg(unit, gpio_atr::ATR_REG_FULL_DUPLEX); if (attr == "READBACK") return iface->read_gpio(unit); } return 0; diff --git a/host/lib/usrp/usrp1/dboard_iface.cpp b/host/lib/usrp/usrp1/dboard_iface.cpp index 4c3141d9e..502d0fbe3 100644 --- a/host/lib/usrp/usrp1/dboard_iface.cpp +++ b/host/lib/usrp/usrp1/dboard_iface.cpp @@ -63,6 +63,7 @@ using namespace uhd; using namespace uhd::usrp; +using namespace uhd::usrp::gpio_atr; using namespace boost::assign; static const dboard_id_t tvrx_id(0x0040); diff --git a/host/lib/usrp/x300/x300_fw_common.h b/host/lib/usrp/x300/x300_fw_common.h index 1b88db69a..cc3f81401 100644 --- a/host/lib/usrp/x300/x300_fw_common.h +++ b/host/lib/usrp/x300/x300_fw_common.h @@ -33,7 +33,7 @@ extern "C" { #define X300_REVISION_MIN 2 #define X300_FW_COMPAT_MAJOR 4 #define X300_FW_COMPAT_MINOR 0 -#define X300_FPGA_COMPAT_MAJOR 15 +#define X300_FPGA_COMPAT_MAJOR 17 //shared memory sections - in between the stack and the program space #define X300_FW_SHMEM_BASE 0x6000 diff --git a/host/lib/usrp/x300/x300_impl.cpp b/host/lib/usrp/x300/x300_impl.cpp index 1e424414e..0483ecf11 100644 --- a/host/lib/usrp/x300/x300_impl.cpp +++ b/host/lib/usrp/x300/x300_impl.cpp @@ -47,23 +47,38 @@ using namespace uhd; using namespace uhd::usrp; using namespace uhd::transport; using namespace uhd::niusrprio; +using namespace uhd::usrp::gpio_atr; using namespace uhd::usrp::x300; namespace asio = boost::asio; -/*********************************************************************** - * Discovery over the udp and pcie transport - **********************************************************************/ +static bool has_dram_buff(wb_iface::sptr zpu_ctrl) { + bool dramR0 = dma_fifo_core_3000::check( + zpu_ctrl, SR_ADDR(SET0_BASE, ZPU_SR_DRAM_FIFO0), SR_ADDR(SET0_BASE, ZPU_RB_DRAM_FIFO0)); + bool dramR1 = dma_fifo_core_3000::check( + zpu_ctrl, SR_ADDR(SET0_BASE, ZPU_SR_DRAM_FIFO1), SR_ADDR(SET0_BASE, ZPU_RB_DRAM_FIFO1)); + return (dramR0 and dramR1); +} + static std::string get_fpga_option(wb_iface::sptr zpu_ctrl) { - //1G = {0:1G, 1:1G} w/ DRAM, HG = {0:1G, 1:10G} w/ DRAM, XG = {0:10G, 1:10G} w/ DRAM - //HGS = {0:1G, 1:10G} w/ SRAM, XGS = {0:10G, 1:10G} w/ SRAM + //Possible options: + //1G = {0:1G, 1:1G} w/ DRAM, HG = {0:1G, 1:10G} w/ DRAM, XG = {0:10G, 1:10G} w/ DRAM + //1GS = {0:1G, 1:1G} w/ SRAM, HGS = {0:1G, 1:10G} w/ SRAM, XGS = {0:10G, 1:10G} w/ SRAM - //In the default configuration, UHD does not support the HG and XG images so - //they are never autodetected. + std::string option; bool eth0XG = (zpu_ctrl->peek32(SR_ADDR(SET0_BASE, ZPU_RB_ETH_TYPE0)) == 0x1); bool eth1XG = (zpu_ctrl->peek32(SR_ADDR(SET0_BASE, ZPU_RB_ETH_TYPE1)) == 0x1); - return (eth0XG && eth1XG) ? "XGS" : (eth1XG ? "HGS" : "1G"); + option = (eth0XG && eth1XG) ? "XG" : (eth1XG ? "HG" : "1G"); + + if (not has_dram_buff(zpu_ctrl)) { + option += "S"; + } + return option; } +/*********************************************************************** + * Discovery over the udp and pcie transport + **********************************************************************/ + //@TODO: Refactor the find functions to collapse common code for ethernet and PCIe static device_addrs_t x300_find_with_addr(const device_addr_t &hint) { @@ -729,6 +744,36 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) } //////////////////////////////////////////////////////////////////// + // DRAM FIFO initialization + //////////////////////////////////////////////////////////////////// + mb.has_dram_buff = has_dram_buff(mb.zpu_ctrl); + if (mb.has_dram_buff) { + for (size_t i = 0; i < mboard_members_t::NUM_RADIOS; i++) { + static const size_t NUM_REGS = 8; + mb.dram_buff_ctrl[i] = dma_fifo_core_3000::make( + mb.zpu_ctrl, + SR_ADDR(SET0_BASE, ZPU_SR_DRAM_FIFO0+(i*NUM_REGS)), + SR_ADDR(SET0_BASE, ZPU_RB_DRAM_FIFO0+i)); + mb.dram_buff_ctrl[i]->resize(X300_DRAM_FIFO_SIZE * i, X300_DRAM_FIFO_SIZE); + + if (mb.dram_buff_ctrl[i]->ext_bist_supported()) { + UHD_MSG(status) << boost::format("Running BIST for DRAM FIFO %d... ") % i; + boost::uint32_t bisterr = mb.dram_buff_ctrl[i]->run_bist(); + if (bisterr != 0) { + throw uhd::runtime_error(str(boost::format("DRAM FIFO BIST failed! (code: %d)\n") % bisterr)); + } else { + double throughput = mb.dram_buff_ctrl[i]->get_bist_throughput(X300_BUS_CLOCK_RATE); + UHD_MSG(status) << (boost::format("pass (Throughput: %.1fMB/s)") % (throughput/1e6)) << std::endl; + } + } else { + if (mb.dram_buff_ctrl[i]->run_bist() != 0) { + throw uhd::runtime_error(str(boost::format("DRAM FIFO %d BIST failed!\n") % i)); + } + } + } + } + + //////////////////////////////////////////////////////////////////// // setup radios //////////////////////////////////////////////////////////////////// this->setup_radio(mb_i, "A", dev_addr); @@ -749,15 +794,15 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) //////////////////////////////////////////////////////////////////// // front panel gpio //////////////////////////////////////////////////////////////////// - mb.fp_gpio = gpio_core_200::make(mb.radio_perifs[0].ctrl, radio::sr_addr(radio::FP_GPIO), radio::RB32_FP_GPIO); + mb.fp_gpio = gpio_atr_3000::make(mb.radio_perifs[0].ctrl, radio::sr_addr(radio::FP_GPIO), radio::RB32_FP_GPIO); BOOST_FOREACH(const gpio_attr_map_t::value_type attr, gpio_attr_map) { _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / attr.second) .set(0) - .subscribe(boost::bind(&x300_impl::set_fp_gpio, this, mb.fp_gpio, attr.first, _1)); + .subscribe(boost::bind(&gpio_atr_3000::set_gpio_attr, mb.fp_gpio, attr.first, _1)); } _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / "READBACK") - .publish(boost::bind(&x300_impl::get_fp_gpio, this, mb.fp_gpio)); + .publish(boost::bind(&gpio_atr_3000::read_gpio, mb.fp_gpio)); //////////////////////////////////////////////////////////////////// // register the time keepers - only one can be the highlander @@ -930,7 +975,8 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name, con perif.spi = spi_core_3000::make(perif.ctrl, radio::sr_addr(radio::SPI), radio::RB32_SPI); perif.adc = x300_adc_ctrl::make(perif.spi, DB_ADC_SEN); perif.dac = x300_dac_ctrl::make(perif.spi, DB_DAC_SEN, mb.clock->get_master_clock_rate()); - perif.leds = gpio_core_200_32wo::make(perif.ctrl, radio::sr_addr(radio::LEDS)); + perif.leds = gpio_atr_3000::make_write_only(perif.ctrl, radio::sr_addr(radio::LEDS)); + perif.leds->set_atr_mode(MODE_ATR, 0xFFFFFFFF); perif.rx_fe = rx_frontend_core_200::make(perif.ctrl, radio::sr_addr(radio::RX_FRONT)); perif.rx_fe->set_dc_offset(rx_frontend_core_200::DEFAULT_DC_OFFSET_VALUE); perif.rx_fe->set_dc_offset_auto(rx_frontend_core_200::DEFAULT_DC_OFFSET_ENABLE); @@ -940,7 +986,10 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name, con perif.framer = rx_vita_core_3000::make(perif.ctrl, radio::sr_addr(radio::RX_CTRL)); perif.ddc = rx_dsp_core_3000::make(perif.ctrl, radio::sr_addr(radio::RX_DSP)); perif.ddc->set_link_rate(10e9/8); //whatever - perif.deframer = tx_vita_core_3000::make(perif.ctrl, radio::sr_addr(radio::TX_CTRL)); + //The DRAM FIFO is treated as in internal radio FIFO for flow control purposes + tx_vita_core_3000::fc_monitor_loc fc_loc = + mb.has_dram_buff ? tx_vita_core_3000::FC_PRE_FIFO : tx_vita_core_3000::FC_PRE_RADIO; + perif.deframer = tx_vita_core_3000::make(perif.ctrl, radio::sr_addr(radio::TX_CTRL), fc_loc); perif.duc = tx_dsp_core_3000::make(perif.ctrl, radio::sr_addr(radio::TX_DSP)); perif.duc->set_link_rate(10e9/8); //whatever @@ -1014,7 +1063,7 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name, con //create a new dboard interface x300_dboard_iface_config_t db_config; - db_config.gpio = gpio_core_200::make(perif.ctrl, radio::sr_addr(radio::GPIO), radio::RB32_GPIO); + db_config.gpio = db_gpio_atr_3000::make(perif.ctrl, radio::sr_addr(radio::GPIO), radio::RB32_GPIO); db_config.spi = perif.spi; db_config.rx_spi_slaveno = DB_RX_SEN; db_config.tx_spi_slaveno = DB_TX_SEN; @@ -1143,7 +1192,7 @@ x300_impl::both_xports_t x300_impl::make_transport( * connection type.*/ size_t eth_data_rec_frame_size = 0; - if (mb.loaded_fpga_image == "HGS") { + if (mb.loaded_fpga_image.substr(0,2) == "HG") { if (mb.router_dst_here == X300_XB_DST_E0) { eth_data_rec_frame_size = X300_1GE_DATA_FRAME_MAX_SIZE; _tree->access<double>("/mboards/"+boost::lexical_cast<std::string>(mb_index) / "link_max_rate").set(X300_MAX_RATE_1GIGE); @@ -1151,7 +1200,7 @@ x300_impl::both_xports_t x300_impl::make_transport( eth_data_rec_frame_size = X300_10GE_DATA_FRAME_MAX_SIZE; _tree->access<double>("/mboards/"+boost::lexical_cast<std::string>(mb_index) / "link_max_rate").set(X300_MAX_RATE_10GIGE); } - } else if (mb.loaded_fpga_image == "XGS") { + } else if (mb.loaded_fpga_image.substr(0,2) == "XG") { eth_data_rec_frame_size = X300_10GE_DATA_FRAME_MAX_SIZE; _tree->access<double>("/mboards/"+boost::lexical_cast<std::string>(mb_index) / "link_max_rate").set(X300_MAX_RATE_10GIGE); } @@ -1295,16 +1344,16 @@ boost::uint32_t x300_impl::allocate_sid(mboard_members_t &mb, const sid_config_t return sid; } -void x300_impl::update_atr_leds(gpio_core_200_32wo::sptr leds, const std::string &rx_ant) +void x300_impl::update_atr_leds(gpio_atr_3000::sptr leds, const std::string &rx_ant) { const bool is_txrx = (rx_ant == "TX/RX"); const int rx_led = (1 << 2); const int tx_led = (1 << 1); const int txrx_led = (1 << 0); - leds->set_atr_reg(dboard_iface::ATR_REG_IDLE, 0); - leds->set_atr_reg(dboard_iface::ATR_REG_RX_ONLY, is_txrx? txrx_led : rx_led); - leds->set_atr_reg(dboard_iface::ATR_REG_TX_ONLY, tx_led); - leds->set_atr_reg(dboard_iface::ATR_REG_FULL_DUPLEX, rx_led | tx_led); + leds->set_atr_reg(ATR_REG_IDLE, 0); + leds->set_atr_reg(ATR_REG_RX_ONLY, is_txrx? txrx_led : rx_led); + leds->set_atr_reg(ATR_REG_TX_ONLY, tx_led); + leds->set_atr_reg(ATR_REG_FULL_DUPLEX, rx_led | tx_led); } void x300_impl::set_tick_rate(mboard_members_t &mb, const double rate) @@ -1314,7 +1363,6 @@ void x300_impl::set_tick_rate(mboard_members_t &mb, const double rate) perif.time64->set_tick_rate(rate); perif.framer->set_tick_rate(rate); perif.ddc->set_tick_rate(rate); - perif.deframer->set_tick_rate(rate); perif.duc->set_tick_rate(rate); } } @@ -1509,30 +1557,6 @@ void x300_impl::set_mb_eeprom(i2c_iface::sptr i2c, const mboard_eeprom_t &mb_eep } /*********************************************************************** - * front-panel GPIO - **********************************************************************/ - -boost::uint32_t x300_impl::get_fp_gpio(gpio_core_200::sptr gpio) -{ - return boost::uint32_t(gpio->read_gpio(dboard_iface::UNIT_RX)); -} - -void x300_impl::set_fp_gpio(gpio_core_200::sptr gpio, const gpio_attr_t attr, const boost::uint32_t value) -{ - switch (attr) - { - case GPIO_CTRL: return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value); - case GPIO_DDR: return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value); - case GPIO_OUT: return gpio->set_gpio_out(dboard_iface::UNIT_RX, value); - case GPIO_ATR_0X: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value); - case GPIO_ATR_RX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value); - case GPIO_ATR_TX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value); - case GPIO_ATR_XX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value); - default: UHD_THROW_INVALID_CODE_PATH(); - } -} - -/*********************************************************************** * claimer logic **********************************************************************/ diff --git a/host/lib/usrp/x300/x300_impl.hpp b/host/lib/usrp/x300/x300_impl.hpp index 1630047af..521ce8a0e 100644 --- a/host/lib/usrp/x300/x300_impl.hpp +++ b/host/lib/usrp/x300/x300_impl.hpp @@ -41,7 +41,8 @@ #include "radio_ctrl_core_3000.hpp" #include "rx_frontend_core_200.hpp" #include "tx_frontend_core_200.hpp" -#include "gpio_core_200.hpp" +#include "gpio_atr_3000.hpp" +#include "dma_fifo_core_3000.hpp" #include <boost/weak_ptr.hpp> #include <uhd/usrp/gps_ctrl.hpp> #include <uhd/usrp/mboard_eeprom.hpp> @@ -56,8 +57,11 @@ static const std::string X300_FW_FILE_NAME = "usrp_x300_fw.bin"; static const double X300_DEFAULT_TICK_RATE = 200e6; //Hz static const double X300_BUS_CLOCK_RATE = 166.666667e6; //Hz -static const size_t X300_TX_HW_BUFF_SIZE = 520*1024; //512K SRAM buffer + 8K 2Clk FIFO -static const size_t X300_TX_FC_RESPONSE_FREQ = 8; //per flow-control window +static const size_t X300_TX_HW_BUFF_SIZE_SRAM = 520*1024; //512K SRAM buffer + 8K 2Clk FIFO +static const size_t X300_TX_FC_RESPONSE_FREQ_SRAM = 8; //per flow-control window +static const size_t X300_TX_HW_BUFF_SIZE_DRAM = 128*1024; +static const size_t X300_TX_FC_RESPONSE_FREQ_DRAM = 32; +static const boost::uint32_t X300_DRAM_FIFO_SIZE = 32*1024*1024; static const size_t X300_RX_SW_BUFF_SIZE_ETH = 0x2000000;//32MiB For an ~8k frame size any size >32MiB is just wasted buffer space static const size_t X300_RX_SW_BUFF_SIZE_ETH_MACOS = 0x100000; //1Mib @@ -123,7 +127,7 @@ enum struct x300_dboard_iface_config_t { - gpio_core_200::sptr gpio; + uhd::usrp::gpio_atr::db_gpio_atr_3000::sptr gpio; spi_core_3000::sptr spi; size_t rx_spi_slaveno; size_t tx_spi_slaveno; @@ -185,7 +189,7 @@ private: rx_dsp_core_3000::sptr ddc; tx_vita_core_3000::sptr deframer; tx_dsp_core_3000::sptr duc; - gpio_core_200_32wo::sptr leds; + uhd::usrp::gpio_atr::gpio_atr_3000::sptr leds; rx_frontend_core_200::sptr rx_fe; tx_frontend_core_200::sptr tx_fe; //Registers @@ -226,10 +230,14 @@ private: return slot_name == "A" ? 0 : 1; } + bool has_dram_buff; + dma_fifo_core_3000::sptr dram_buff_ctrl[NUM_RADIOS]; + + //other perifs on mboard x300_clock_ctrl::sptr clock; uhd::gps_ctrl::sptr gps; - gpio_core_200::sptr fp_gpio; + uhd::usrp::gpio_atr::gpio_atr_3000::sptr fp_gpio; uhd::usrp::x300::fw_regmap_t::sptr fw_regmap; @@ -365,9 +373,7 @@ private: void check_fw_compat(const uhd::fs_path &mb_path, uhd::wb_iface::sptr iface); void check_fpga_compat(const uhd::fs_path &mb_path, const mboard_members_t &members); - void update_atr_leds(gpio_core_200_32wo::sptr, const std::string &ant); - boost::uint32_t get_fp_gpio(gpio_core_200::sptr); - void set_fp_gpio(gpio_core_200::sptr, const gpio_attr_t, const boost::uint32_t); + void update_atr_leds(uhd::usrp::gpio_atr::gpio_atr_3000::sptr, const std::string &ant); void self_cal_adc_capture_delay(mboard_members_t& mb, const size_t radio_i, bool print_status = false); double self_cal_adc_xfer_delay(mboard_members_t& mb, bool apply_delay = false); diff --git a/host/lib/usrp/x300/x300_io_impl.cpp b/host/lib/usrp/x300/x300_io_impl.cpp index e3515af0c..1356daec5 100644 --- a/host/lib/usrp/x300/x300_io_impl.cpp +++ b/host/lib/usrp/x300/x300_io_impl.cpp @@ -216,9 +216,10 @@ struct x300_tx_fc_guts_t * FC credit we have is C = F + M - N (i.e. we can send C more packets * before getting another ack). */ -static size_t get_tx_flow_control_window(size_t frame_size, const device_addr_t& tx_args) +static size_t get_tx_flow_control_window(size_t frame_size, const bool dram_buff, const device_addr_t& tx_args) { - double hw_buff_size = tx_args.cast<double>("send_buff_size", X300_TX_HW_BUFF_SIZE); + double default_buff_size = dram_buff ? X300_TX_HW_BUFF_SIZE_DRAM : X300_TX_HW_BUFF_SIZE_SRAM; + double hw_buff_size = tx_args.cast<double>("send_buff_size", default_buff_size); size_t window_in_pkts = (static_cast<size_t>(hw_buff_size) / frame_size); if (window_in_pkts == 0) { throw uhd::value_error("send_buff_size must be larger than the send_frame_size."); @@ -580,8 +581,9 @@ tx_streamer::sptr x300_impl::get_tx_stream(const uhd::stream_args_t &args_) perif.duc->setup(args); //flow control setup - size_t fc_window = get_tx_flow_control_window(xport.send->get_send_frame_size(), device_addr); //In packets - const size_t fc_handle_window = std::max<size_t>(1, fc_window/X300_TX_FC_RESPONSE_FREQ); + size_t fc_window = get_tx_flow_control_window(xport.send->get_send_frame_size(), mb.has_dram_buff, device_addr); //In packets + const size_t fc_handle_window = std::max<size_t>(1, + fc_window/ (mb.has_dram_buff ? X300_TX_FC_RESPONSE_FREQ_DRAM : X300_TX_FC_RESPONSE_FREQ_SRAM)); UHD_LOG << "TX Flow Control Window = " << fc_window << ", TX Flow Control Handler Window = " << fc_handle_window << std::endl; diff --git a/host/lib/usrp/x300/x300_regs.hpp b/host/lib/usrp/x300/x300_regs.hpp index eba30abb5..7173c0660 100644 --- a/host/lib/usrp/x300/x300_regs.hpp +++ b/host/lib/usrp/x300/x300_regs.hpp @@ -77,6 +77,8 @@ localparam ZPU_SR_XB_LOCAL = 03; localparam ZPU_SR_SPI = 32; localparam ZPU_SR_ETHINT0 = 40; localparam ZPU_SR_ETHINT1 = 56; +localparam ZPU_SR_DRAM_FIFO0 = 72; +localparam ZPU_SR_DRAM_FIFO1 = 80; //reset bits #define ZPU_SR_SW_RST_ETH_PHY (1<<0) @@ -89,6 +91,8 @@ localparam ZPU_RB_CLK_STATUS = 3; localparam ZPU_RB_COMPAT_NUM = 6; localparam ZPU_RB_ETH_TYPE0 = 4; localparam ZPU_RB_ETH_TYPE1 = 5; +localparam ZPU_RB_DRAM_FIFO0 = 10; +localparam ZPU_RB_DRAM_FIFO1 = 11; //spi slaves on radio #define DB_DAC_SEN (1 << 7) diff --git a/host/lib/utils/msg.cpp b/host/lib/utils/msg.cpp index de98ada64..95879a116 100644 --- a/host/lib/utils/msg.cpp +++ b/host/lib/utils/msg.cpp @@ -79,6 +79,8 @@ void uhd::msg::register_handler(const handler_t &handler){ } static void default_msg_handler(uhd::msg::type_t type, const std::string &msg){ + static boost::mutex msg_mutex; + boost::mutex::scoped_lock lock(msg_mutex); switch(type){ case uhd::msg::fastpath: std::cerr << msg << std::flush; diff --git a/host/tests/CMakeLists.txt b/host/tests/CMakeLists.txt index 8b12c961f..d5d15ede8 100644 --- a/host/tests/CMakeLists.txt +++ b/host/tests/CMakeLists.txt @@ -77,3 +77,5 @@ IF(MSVC OR APPLE OR LINUX) ADD_LIBRARY(module_test MODULE module_test.cpp) TARGET_LINK_LIBRARIES(module_test uhd) ENDIF() + +ADD_SUBDIRECTORY(devtest) diff --git a/host/tests/convert_test.cpp b/host/tests/convert_test.cpp index d71d756dd..8d359d2e2 100644 --- a/host/tests/convert_test.cpp +++ b/host/tests/convert_test.cpp @@ -417,16 +417,16 @@ BOOST_AUTO_TEST_CASE(test_convert_types_sc16_and_sc8){ } /*********************************************************************** - * Test short conversion + * Test u8 conversion **********************************************************************/ static void test_convert_types_u8( size_t nsamps, convert::id_type &id ){ //fill the input samples std::vector<boost::uint8_t> input(nsamps), output(nsamps); - //BOOST_FOREACH(boost::uint8_t &in, input) in = boost::uint8_t(std::rand() & 0xFF); - boost::uint32_t d = 48; - BOOST_FOREACH(boost::uint8_t &in, input) in = d++; + BOOST_FOREACH(boost::uint8_t &in, input) in = boost::uint8_t(std::rand() & 0xFF); + //boost::uint32_t d = 48; + //BOOST_FOREACH(boost::uint8_t &in, input) in = d++; //run the loopback and test convert::id_type in_id = id; @@ -455,3 +455,158 @@ BOOST_AUTO_TEST_CASE(test_convert_types_u8_and_u8){ test_convert_types_u8(nsamps, id); } } + +/*********************************************************************** + * Test s8 conversion + **********************************************************************/ +static void test_convert_types_s8( + size_t nsamps, convert::id_type &id +){ + //fill the input samples + std::vector<boost::int8_t> input(nsamps), output(nsamps); + BOOST_FOREACH(boost::int8_t &in, input) in = boost::int8_t(std::rand() & 0xFF); + + //run the loopback and test + convert::id_type in_id = id; + convert::id_type out_id = id; + std::swap(out_id.input_format, out_id.output_format); + std::swap(out_id.num_inputs, out_id.num_outputs); + loopback(nsamps, in_id, out_id, input, output); + BOOST_CHECK_EQUAL_COLLECTIONS(input.begin(), input.end(), output.begin(), output.end()); +} + +BOOST_AUTO_TEST_CASE(test_convert_types_s8_and_s8){ + convert::id_type id; + id.input_format = "s8"; + id.num_inputs = 1; + id.num_outputs = 1; + + //try various lengths to test edge cases + id.output_format = "s8_item32_le"; + for (size_t nsamps = 1; nsamps < 16; nsamps++){ + test_convert_types_s8(nsamps, id); + } + + //try various lengths to test edge cases + id.output_format = "s8_item32_be"; + for (size_t nsamps = 1; nsamps < 16; nsamps++){ + test_convert_types_s8(nsamps, id); + } +} + +/*********************************************************************** + * Test s16 conversion + **********************************************************************/ +static void test_convert_types_s16( + size_t nsamps, convert::id_type &id +){ + //fill the input samples + std::vector<boost::int16_t> input(nsamps), output(nsamps); + BOOST_FOREACH(boost::int16_t &in, input) in = boost::int16_t(std::rand() & 0xFFFF); + + //run the loopback and test + convert::id_type in_id = id; + convert::id_type out_id = id; + std::swap(out_id.input_format, out_id.output_format); + std::swap(out_id.num_inputs, out_id.num_outputs); + loopback(nsamps, in_id, out_id, input, output); + BOOST_CHECK_EQUAL_COLLECTIONS(input.begin(), input.end(), output.begin(), output.end()); +} + +BOOST_AUTO_TEST_CASE(test_convert_types_s16_and_s16){ + convert::id_type id; + id.input_format = "s16"; + id.num_inputs = 1; + id.num_outputs = 1; + + //try various lengths to test edge cases + id.output_format = "s16_item32_le"; + for (size_t nsamps = 1; nsamps < 16; nsamps++){ + test_convert_types_s16(nsamps, id); + } + + //try various lengths to test edge cases + id.output_format = "s16_item32_be"; + for (size_t nsamps = 1; nsamps < 16; nsamps++){ + test_convert_types_s16(nsamps, id); + } +} + +/*********************************************************************** + * Test fc32 -> fc32 conversion + **********************************************************************/ +static void test_convert_types_fc32( + size_t nsamps, convert::id_type &id +){ + //fill the input samples + std::vector< std::complex<float> > input(nsamps), output(nsamps); + BOOST_FOREACH(fc32_t &in, input) in = fc32_t( + (std::rand()/float(RAND_MAX/2)) - 1, + (std::rand()/float(RAND_MAX/2)) - 1 + ); + + //run the loopback and test + convert::id_type in_id = id; + convert::id_type out_id = id; + std::swap(out_id.input_format, out_id.output_format); + std::swap(out_id.num_inputs, out_id.num_outputs); + loopback(nsamps, in_id, out_id, input, output); + BOOST_CHECK_EQUAL_COLLECTIONS(input.begin(), input.end(), output.begin(), output.end()); +} + +BOOST_AUTO_TEST_CASE(test_convert_types_fc32_and_fc32){ + convert::id_type id; + id.input_format = "fc32"; + id.num_inputs = 1; + id.num_outputs = 1; + + //try various lengths to test edge cases + id.output_format = "fc32_item32_le"; + for (size_t nsamps = 1; nsamps < 16; nsamps++){ + test_convert_types_fc32(nsamps, id); + } + + //try various lengths to test edge cases + id.output_format = "fc32_item32_be"; + for (size_t nsamps = 1; nsamps < 16; nsamps++){ + test_convert_types_fc32(nsamps, id); + } +} + +/*********************************************************************** + * Test f32 -> f32 conversion + **********************************************************************/ +static void test_convert_types_f32( + size_t nsamps, convert::id_type &id +){ + //fill the input samples + std::vector<float> input(nsamps), output(nsamps); + BOOST_FOREACH(float &in, input) in = float((std::rand()/float(RAND_MAX/2)) - 1); + + //run the loopback and test + convert::id_type in_id = id; + convert::id_type out_id = id; + std::swap(out_id.input_format, out_id.output_format); + std::swap(out_id.num_inputs, out_id.num_outputs); + loopback(nsamps, in_id, out_id, input, output); + BOOST_CHECK_EQUAL_COLLECTIONS(input.begin(), input.end(), output.begin(), output.end()); +} + +BOOST_AUTO_TEST_CASE(test_convert_types_f32_and_f32){ + convert::id_type id; + id.input_format = "f32"; + id.num_inputs = 1; + id.num_outputs = 1; + + //try various lengths to test edge cases + id.output_format = "f32_item32_le"; + for (size_t nsamps = 1; nsamps < 16; nsamps++){ + test_convert_types_f32(nsamps, id); + } + + //try various lengths to test edge cases + id.output_format = "f32_item32_be"; + for (size_t nsamps = 1; nsamps < 16; nsamps++){ + test_convert_types_f32(nsamps, id); + } +} diff --git a/host/tests/devtest/CMakeLists.txt b/host/tests/devtest/CMakeLists.txt new file mode 100644 index 000000000..c770446a6 --- /dev/null +++ b/host/tests/devtest/CMakeLists.txt @@ -0,0 +1,40 @@ +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +# Formatting +MESSAGE(STATUS "") + +# +# Arguments: +# - pattern: This will be used to identify which devtest_*.py is to be executed. +# - filter: Will be used in args strings as "type=<filter>". +# - devtype: A descriptive string. Is only used for CMake output. +MACRO(ADD_DEVTEST pattern filter devtype) + MESSAGE(STATUS "Adding ${devtype} device test target") + ADD_CUSTOM_TARGET("test_${pattern}" + ${PYTHON_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/run_testsuite.py + "--src-dir" "@CMAKE_CURRENT_SOURCE_DIR@" + "--devtest-pattern" "${pattern}" + "--device-filter" "${filter}" + "--build-type" "${CMAKE_BUILD_TYPE}" + "--build-dir" "${CMAKE_BINARY_DIR}" + COMMENT "Running device test on all connected ${devtype} devices:" + WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}" + ) +ENDMACRO(ADD_DEVTEST) + +IF(ENABLE_B200) + ADD_DEVTEST("b2xx" "b200" "B2XX") +ENDIF(ENABLE_B200) +IF(ENABLE_X300) + ADD_DEVTEST("x3x0" "x300" "X3x0") +ENDIF(ENABLE_X300) + +# Formatting +MESSAGE(STATUS "") diff --git a/host/tests/devtest/README.md b/host/tests/devtest/README.md new file mode 100644 index 000000000..ee1ff3c9f --- /dev/null +++ b/host/tests/devtest/README.md @@ -0,0 +1,28 @@ +# Device Tests + +These are a set of tests to be run with one or more attached devices. +None of these tests require special configuration; e.g., the X3x0 test +will work regardless of attached daughterboards, FPGIO wiring etc. + +## Adding new tests + +To add new tests, add new files with classes that derive from unittest.TestCase. +Most of the time, you'll want to derive from `uhd_test_case` or +`uhd_example_test_case`. + +## Adding new devices + +To add new devices, follow these steps: + +1) Add an entry to the CMakeLists.txt file in this directory using the + `ADD_DEVTEST()` macro. +2) Add a `devtest_pattern.py` file to this directory, where `pattern` is + the same pattern used in the `ADD_DEVTEST()` macro. +3) Edit this devtest file to import all the tests you want to run. Some + may require parameterization. + +The devtest file is 'executed' using Python's unittest module, so it doesn't +require any actual commands. If the device needs special initialization, +commands inside this file will be executed *if* they are *not* in a +`if __name__ == "__main__"` conditional. + diff --git a/host/tests/devtest/benchmark_rate_test.py b/host/tests/devtest/benchmark_rate_test.py new file mode 100755 index 000000000..2602e1771 --- /dev/null +++ b/host/tests/devtest/benchmark_rate_test.py @@ -0,0 +1,75 @@ +#!/usr/bin/env python +# +# Copyright 2015 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +""" Test using benchmark_rate. """ + +import re +from uhd_test_base import shell_application, uhd_example_test_case + +class uhd_benchmark_rate_test(uhd_example_test_case): + """ + Run benchmark_rate in various configurations. + """ + tests = {} + + def setup_example(self): + """ + Set args. + """ + self.test_params = uhd_benchmark_rate_test.tests + + def run_test(self, test_name, test_args): + """ + Runs benchmark_rate with the given parameters. Parses output and writes + results to file. + """ + self.log.info('Running test {n}, Channel = {c}, Sample Rate = {r}'.format( + n=test_name, c=test_args.get('chan', '0'), r=test_args.get('rate', 1e6), + )) + args = [ + self.create_addr_args_str(), + '--duration', str(test_args.get('duration', 1)), + '--channels', str(test_args.get('chan', '0')), + ] + if 'tx' in test_args['direction']: + args.append('--tx_rate') + args.append(str(test_args.get('rate', 1e6))) + if 'rx' in test_args['direction']: + args.append('--rx_rate') + args.append(str(test_args.get('rate'))) + (app, run_results) = self.run_example('benchmark_rate', args) + match = re.search(r'(Num received samples):\s*(.*)', app.stdout) + run_results['num_rx_samples'] = int(match.group(2)) if match else -1 + match = re.search(r'(Num dropped samples):\s*(.*)', app.stdout) + run_results['num_rx_dropped'] = int(match.group(2)) if match else -1 + match = re.search(r'(Num overflows detected):\s*(.*)', app.stdout) + run_results['num_rx_overruns'] = int(match.group(2)) if match else -1 + match = re.search(r'(Num transmitted samples):\s*(.*)', app.stdout) + run_results['num_tx_samples'] = int(match.group(2)) if match else -1 + match = re.search(r'(Num sequence errors):\s*(.*)', app.stdout) + run_results['num_tx_seqerrs'] = int(match.group(2)) if match else -1 + match = re.search(r'(Num underflows detected):\s*(.*)', app.stdout) + run_results['num_tx_underruns'] = int(match.group(2)) if match else -1 + run_results['passed'] = all([ + run_results['return_code'] == 0, + run_results['num_rx_dropped'] == 0, + run_results['num_tx_seqerrs'] == 0, + run_results['num_tx_underruns'] <= test_args.get('acceptable-underruns', 0), + ]) + self.report_example_results(test_name, run_results) + return run_results + diff --git a/host/tests/devtest/devtest_b2xx.py b/host/tests/devtest/devtest_b2xx.py new file mode 100755 index 000000000..cd777aa18 --- /dev/null +++ b/host/tests/devtest/devtest_b2xx.py @@ -0,0 +1,76 @@ +# +# Copyright 2015 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +""" +Run device tests for the B2xx series. +""" + +from benchmark_rate_test import uhd_benchmark_rate_test +uhd_benchmark_rate_test.tests = { + #'mimo': { + #'duration': 1, + #'directions': ['tx,rx',], + #'channels': ['0,1',], + #'sample-rates': [1e6, 30e6], + #'products': ['B210',], + #'acceptable-underruns': 500, + #}, + 'siso_chan0_slow': { + 'duration': 1, + 'direction': 'tx,rx', + 'chan': '0', + 'rate': 1e6, + 'acceptable-underruns': 50, + }, + 'siso_chan0_fast': { + 'duration': 1, + 'direction': 'tx,rx', + 'chan': '0', + 'rate': 40e6, + 'acceptable-underruns': 500, + }, + 'siso_chan1_slow': { + 'duration': 1, + 'direction': 'tx,rx', + 'chan': '1', + 'rate': 1e6, + 'acceptable-underruns': 50, + 'products': ['B210',], + }, + 'siso_chan1_fast': { + 'duration': 1, + 'direction': 'tx,rx', + 'chan': '1', + 'rate': 40e6, + 'acceptable-underruns': 500, + 'products': ['B210',], + }, +} + +from rx_samples_to_file_test import rx_samples_to_file_test +rx_samples_to_file_test.tests = { + 'default': { + 'duration': 1, + 'subdev': 'A:A', + 'rate': 5e6, + 'products': ['B210', 'B200',], + }, +} + +from tx_bursts_test import uhd_tx_bursts_test +from test_pps_test import uhd_test_pps_test +from gpio_test import gpio_test + diff --git a/host/tests/devtest/devtest_x3x0.py b/host/tests/devtest/devtest_x3x0.py new file mode 100755 index 000000000..7ad6b21b6 --- /dev/null +++ b/host/tests/devtest/devtest_x3x0.py @@ -0,0 +1,57 @@ +# +# Copyright 2015 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +""" +Run device tests for the X3x0 series. +""" + +from benchmark_rate_test import uhd_benchmark_rate_test +uhd_benchmark_rate_test.tests = { + 'mimo_slow': { + 'duration': 1, + 'direction': 'tx,rx', + 'chan': '0,1', + 'rate': 1e6, + 'acceptable-underruns': 500, + }, + 'mimo_fast': { + 'duration': 1, + 'direction': 'tx,rx', + 'chan': '0,1', + 'rate': 12.5e6, + 'acceptable-underruns': 500, + }, + 'siso_chan0_slow': { + 'duration': 1, + 'direction': 'tx,rx', + 'chan': '0', + 'rate': 1e6, + 'acceptable-underruns': 0, + }, + 'siso_chan1_slow': { + 'duration': 1, + 'direction': 'tx,rx', + 'chan': '1', + 'rate': 1e6, + 'acceptable-underruns': 0, + }, +} + +#from rx_samples_to_file_test import rx_samples_to_file_test +from tx_bursts_test import uhd_tx_bursts_test +from test_pps_test import uhd_test_pps_test +from gpio_test import gpio_test + diff --git a/host/tests/devtest/gpio_test.py b/host/tests/devtest/gpio_test.py new file mode 100644 index 000000000..d764a8d96 --- /dev/null +++ b/host/tests/devtest/gpio_test.py @@ -0,0 +1,47 @@ +# +# Copyright 2015 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +""" Test for test_pps_input. """ + +import re +from uhd_test_base import uhd_example_test_case + +class gpio_test(uhd_example_test_case): + """ Run gpio. """ + tests = {'default': {},} + + def setup_example(self): + """ + Set args. + """ + self.test_params = gpio_test.tests + + def run_test(self, test_name, test_args): + """ Run the app and scrape for the success message. """ + self.log.info('Running test {n}'.format(n=test_name,)) + # Run example: + args = [ + self.create_addr_args_str(), + ] + (app, run_results) = self.run_example('gpio', args) + # Evaluate pass/fail: + run_results['passed'] = all([ + app.returncode == 0, + re.search('All tests passed!', app.stdout) is not None, + ]) + self.report_example_results(test_name, run_results) + return run_results + diff --git a/host/tests/devtest/run_testsuite.py b/host/tests/devtest/run_testsuite.py new file mode 100755 index 000000000..587d1cc64 --- /dev/null +++ b/host/tests/devtest/run_testsuite.py @@ -0,0 +1,132 @@ +#!/usr/bin/env python +# +# Copyright 2015 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +""" +Device test runner. +""" + +import os +import sys +import subprocess +import argparse +import logging +import time +from threading import Thread +try: + from Queue import Queue, Empty +except ImportError: + from queue import Queue, Empty # Py3k +from usrp_probe import get_usrp_list + +ANI = ('.', 'o', 'O', '0', 'O', 'o') + +def setup_parser(): + """ Set up argparser """ + parser = argparse.ArgumentParser(description="Test utility for UHD/USRP.") + parser.add_argument('--devtest-pattern', '-p', default='*', help='e.g. b2xx') + parser.add_argument('--device-filter', '-f', default=None, required=True, help='b200, x300, ...') + parser.add_argument('--log-dir', '-l', default='.') + parser.add_argument('--src-dir', default='.', help='Directory where the test sources are stored') + parser.add_argument('--build-dir', default=None, help='Build dir (where examples/ and utils/ are)') + parser.add_argument('--build-type', default='Release') + return parser + +def setup_env(args): + def setup_env_win(env, build_dir, build_type): + env['PATH'] = "{build_dir}/lib/{build_type};{build_dir}/examples/{build_type};{build_dir}/utils/{build_type};{path}".format( + build_dir=build_dir, build_type=build_type, path=env.get('PATH', '') + ) + env['LIBPATH'] = "{build_dir}/lib/{build_type};{path}".format( + build_dir=build_dir, build_type=build_type, path=env.get('LIBPATH', '') + ) + env['LIB'] = "{build_dir}/lib/{build_type};{path}".format( + build_dir=build_dir, build_type=build_type, path=env.get('LIB', '') + ) + return env + def setup_env_unix(env, build_dir): + env['PATH'] = "{build_dir}/examples:{build_dir}/utils:{path}".format( + build_dir=build_dir, path=env.get('PATH', '') + ) + env['LD_LIBRARY_PATH'] = "{build_dir}/lib:{path}".format( + build_dir=build_dir, path=env.get('LD_LIBRARY_PATH', '') + ) + return env + def setup_env_osx(env, build_dir): + env['PATH'] = "{build_dir}/examples:{build_dir}/utils:{path}".format( + build_dir=build_dir, path=env.get('PATH', '') + ) + env['DYLD_LIBRARY_PATH'] = "{build_dir}/lib:{path}".format( + build_dir=build_dir, path=env.get('DYLD_LIBRARY_PATH', '') + ) + return env + ### Go + env = os.environ + if sys.platform.startswith('linux'): + env = setup_env_unix(env, args.build_dir) + elif sys.platform.startswith('win'): + env = setup_env_win(env, args.build_dir, args.build_type) + elif sys.platform.startswith('darwin'): + env = setup_env_osx(env, args.build_dir) + else: + print("Devtest not supported on this platform ({0}).".format(sys.platform)) + exit(1) + return env + +def main(): + """ + Go, go, go! + """ + args = setup_parser().parse_args() + devtest_pattern = "devtest_{p}.py".format(p=args.devtest_pattern) + uhd_args_list = get_usrp_list("type=" + args.device_filter) + if len(uhd_args_list) == 0: + print("No devices found. Exiting.") + exit(1) + for uhd_idx, uhd_info in enumerate(uhd_args_list): + print('--- Running all tests for device {dev} ({prod}, Serial: {ser}).'.format( + dev=uhd_idx, + prod=uhd_info.get('product', 'USRP'), + ser=uhd_info.get('serial') + )) + print('--- This will take some time. Better grab a cup of tea.') + env = setup_env(args) + args_str = uhd_info['args'] + env['_UHD_TEST_ARGS_STR'] = args_str + logfile_name = "log{}.log".format( + args_str.replace('type=', '_').replace('serial=', '_').replace(',', '') + ) + resultsfile_name = "results{}.log".format( + args_str.replace('type=', '_').replace('serial=', '_').replace(',', '') + ) + env['_UHD_TEST_LOGFILE'] = os.path.join(args.log_dir, logfile_name) + env['_UHD_TEST_RESULTSFILE'] = os.path.join(args.log_dir, resultsfile_name) + env['_UHD_TEST_LOG_LEVEL'] = str(logging.INFO) + env['_UHD_TEST_PRINT_LEVEL'] = str(logging.WARNING) + p = subprocess.Popen( + [ + "python", "-m", "unittest", "discover", "-v", + "-s", args.src_dir, + "-p", devtest_pattern, + ], + env=env, + stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.STDOUT, + ) + print p.communicate()[0] + print('--- Done testing all attached devices.') + +if __name__ == "__main__": + main() diff --git a/host/tests/devtest/rx_samples_to_file_test.py b/host/tests/devtest/rx_samples_to_file_test.py new file mode 100755 index 000000000..bac6ac256 --- /dev/null +++ b/host/tests/devtest/rx_samples_to_file_test.py @@ -0,0 +1,67 @@ +#!/usr/bin/env python +# +# Copyright 2015 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +""" Test the rx_samples_to_file example. """ + +from uhd_test_base import uhd_example_test_case + +class rx_samples_to_file_test(uhd_example_test_case): + """ + Run rx_samples_to_file and check output. + """ + tests = { + 'default': { + 'duration': 1, + 'rate': 5e6, + }, + } + + def setup_example(self): + """ + Set args. + """ + self.test_params = rx_samples_to_file_test.tests + + def run_test(self, test_name, test_args): + """ + Test launcher. Runs the example. + """ + self.log.info('Running test {n}, Subdev = {subdev}, Sample Rate = {rate}'.format( + n=test_name, subdev=test_args.get('subdev'), rate=test_args.get('rate'), + )) + # Run example: + args = [ + self.create_addr_args_str(), + '--null', + '--stats', + '--duration', str(test_args['duration']), + '--rate', str(test_args.get('rate', 1e6)), + '--wirefmt', test_args.get('wirefmt', 'sc16'), + ] + if test_args.has_key('subdev'): + args.append('--subdev') + args.append(test_args['subdev']) + (app, run_results) = self.run_example('rx_samples_to_file', args) + # Evaluate pass/fail: + run_results['passed'] = all([ + not run_results['has_D'], + not run_results['has_S'], + run_results['return_code'] == 0, + ]) + self.report_example_results(test_name, run_results) + return run_results + diff --git a/host/tests/devtest/test_messages_test.py b/host/tests/devtest/test_messages_test.py new file mode 100644 index 000000000..496765c75 --- /dev/null +++ b/host/tests/devtest/test_messages_test.py @@ -0,0 +1,57 @@ +#!/usr/bin/env python +# +# Copyright 2015 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +""" Test the test_messages example. """ + +import re +from uhd_test_base import uhd_example_test_case + +class uhd_test_messages_test(uhd_example_test_case): + """ + Run test_messages and check output. + """ + tests = {'default': {},} + + def setup_example(self): + """ + Set args. + """ + self.test_params = uhd_test_messages_test.tests + + def run_test(self, test_name, test_args): + """ Run the app and scrape for the failure messages. """ + self.log.info('Running test {n}'.format(n=test_name,)) + # Run example: + args = [ + self.create_addr_args_str(), + ] + if test_args.has_key('ntests'): + args.append('--ntests') + args.append(test_args['ntests']) + (app, run_results) = self.run_example('test_messages', args) + # Evaluate pass/fail: + succ_fail_re = re.compile(r'(?P<test>.*)->\s+(?P<succ>\d+) successes,\s+(?P<fail>\d+) +failures') + for mo in succ_fail_re.finditer(app.stdout): + key = mo.group("test").strip().replace(' ', '_').lower() + successes = int(mo.group("succ")) + failures = int(mo.group("fail")) + run_results[key] = "{}/{}".format(successes, successes+failures) + run_results['passed'] = bool(failures) + + self.report_example_results(test_name, run_results) + return run_results + diff --git a/host/tests/devtest/test_pps_test.py b/host/tests/devtest/test_pps_test.py new file mode 100644 index 000000000..1e5b36e2c --- /dev/null +++ b/host/tests/devtest/test_pps_test.py @@ -0,0 +1,51 @@ +#!/usr/bin/env python +# +# Copyright 2015 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +""" Test for test_pps_input. """ + +import re +from uhd_test_base import uhd_example_test_case + +class uhd_test_pps_test(uhd_example_test_case): + """ Run test_pps_input. """ + tests = {'default': {},} + + def setup_example(self): + """ + Set args. + """ + self.test_params = uhd_test_pps_test.tests + + def run_test(self, test_name, test_args): + """ Run the app and scrape for the success message. """ + self.log.info('Running test {n}'.format(n=test_name,)) + # Run example: + args = [ + self.create_addr_args_str(), + ] + if test_args.has_key('source'): + args.append('--source') + args.append(test_args['source']) + (app, run_results) = self.run_example('test_pps_input', args) + # Evaluate pass/fail: + run_results['passed'] = all([ + app.returncode == 0, + re.search('Success!', app.stdout) is not None, + ]) + self.report_example_results(test_name, run_results) + return run_results + diff --git a/host/tests/devtest/tx_bursts_test.py b/host/tests/devtest/tx_bursts_test.py new file mode 100755 index 000000000..863f35fe1 --- /dev/null +++ b/host/tests/devtest/tx_bursts_test.py @@ -0,0 +1,63 @@ +#!/usr/bin/env python +# +# Copyright 2015 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +""" Run the test for tx_burst """ + +import re +from uhd_test_base import uhd_example_test_case + +class uhd_tx_bursts_test(uhd_example_test_case): + """ Run test_messages. """ + tests = { + 'default': { + 'nsamps': 10000, + 'rate': 5e6, + 'channels': '0', + }, + } + + def setup_example(self): + """ + Set args. + """ + self.test_params = uhd_tx_bursts_test.tests + + def run_test(self, test_name, test_args): + """ Run the app and scrape for the failure messages. """ + self.log.info('Running test {name}, Channel = {channel}, Sample Rate = {rate}'.format( + name=test_name, channel=test_args.get('channel'), rate=test_args.get('rate'), + )) + # Run example: + args = [ + self.create_addr_args_str(), + '--nsamps', str(test_args['nsamps']), + '--channels', str(test_args['channels']), + '--rate', str(test_args.get('rate', 1e6)), + ] + if test_args.has_key('subdev'): + args.append('--subdev') + args.append(test_args['subdev']) + (app, run_results) = self.run_example('tx_bursts', args) + # Evaluate pass/fail: + run_results['passed'] = all([ + app.returncode == 0, + not run_results['has_S'], + ]) + run_results['async_burst_ack_found'] = re.search('success', app.stdout) is not None + self.report_example_results(test_name, run_results) + return run_results + diff --git a/host/tests/devtest/uhd_test_base.py b/host/tests/devtest/uhd_test_base.py new file mode 100755 index 000000000..046e6fb47 --- /dev/null +++ b/host/tests/devtest/uhd_test_base.py @@ -0,0 +1,222 @@ +#!/usr/bin/env python + +import os +import sys +import yaml +import unittest +import re +import time +import logging +from subprocess import Popen, PIPE, STDOUT +from usrp_probe import get_usrp_list + +#-------------------------------------------------------------------------- +# Application +#-------------------------------------------------------------------------- +class shell_application(object): + """ + Wrapper for applications that are in $PATH. + Note: The CMake infrastructure makes sure all examples and utils are in $PATH. + """ + def __init__(self, name): + self.name = name + self.stdout = '' + self.stderr = '' + self.returncode = None + self.exec_time = None + + def run(self, args = []): + cmd_line = [self.name] + cmd_line.extend(args) + start_time = time.time() + p = Popen(cmd_line, stdout=PIPE, stderr=PIPE, close_fds=True) + self.stdout, self.stderr = p.communicate() + self.returncode = p.returncode + self.exec_time = time.time() - start_time + +#-------------------------------------------------------------------------- +# Test case base +#-------------------------------------------------------------------------- +class uhd_test_case(unittest.TestCase): + """ + Base class for UHD test cases. + """ + test_name = '--TEST--' + + def set_up(self): + """ + Override this to add own setup code per test. + """ + pass + + def setUp(self): + self.name = self.__class__.__name__ + self.test_id = self.id().split('.')[-1] + self.results = {} + self.results_file = os.getenv('_UHD_TEST_RESULTSFILE', "") + if self.results_file and os.path.isfile(self.results_file): + self.results = yaml.safe_load(open(self.results_file).read()) or {} + self.args_str = os.getenv('_UHD_TEST_ARGS_STR', "") + self.usrp_info = get_usrp_list(self.args_str)[0] + if not self.results.has_key(self.usrp_info['serial']): + self.results[self.usrp_info['serial']] = {} + if not self.results[self.usrp_info['serial']].has_key(self.name): + self.results[self.usrp_info['serial']][self.name] = {} + self.setup_logger() + self.set_up() + + def setup_logger(self): + " Add logging infrastructure " + self.log = logging.getLogger("devtest.{name}".format(name=self.name)) + self.log_file = os.getenv('_UHD_TEST_LOGFILE', "devtest.log") + #self.log_level = int(os.getenv('_UHD_TEST_LOG_LEVEL', logging.DEBUG)) + #self.print_level = int(os.getenv('_UHD_TEST_PRINT_LEVEL', logging.WARNING)) + self.log_level = logging.DEBUG + self.print_level = logging.WARNING + file_handler = logging.FileHandler(self.log_file) + file_handler.setLevel(self.log_level) + console_handler = logging.StreamHandler() + console_handler.setLevel(self.print_level) + formatter = logging.Formatter('%(asctime)s - %(name)s - %(levelname)s - %(message)s') + file_handler.setFormatter(formatter) + console_handler.setFormatter(formatter) + self.log.setLevel(logging.DEBUG) + self.log.addHandler(file_handler) + self.log.addHandler(console_handler) + self.log.info("Starting test with device: {dev}".format(dev=self.args_str)) + + def tear_down(self): + pass + + def tearDown(self): + self.tear_down() + if self.results_file: + open(self.results_file, 'w').write(yaml.dump(self.results, default_flow_style=False)) + + def report_result(self, testname, key, value): + """ Store a result as a key/value pair. + After completion, all results for one test are written to the results file. + """ + if not self.results[self.usrp_info['serial']][self.name].has_key(testname): + self.results[self.usrp_info['serial']][self.name][testname] = {} + self.results[self.usrp_info['serial']][self.name][testname][key] = value + + def create_addr_args_str(self, argname="args"): + """ Returns an args string, usually '--args "type=XXX,serial=YYY" """ + if len(self.args_str) == 0: + return '' + return '--{}={}'.format(argname, self.args_str) + + def filter_warnings(self, errstr): + """ Searches errstr for UHD warnings, removes them, and puts them into a separate string. + Returns (errstr, warnstr), where errstr no longer has warning. """ + warn_re = re.compile("UHD Warning:\n(?: .*\n)+") + warnstr = "\n".join(warn_re.findall(errstr)).strip() + errstr = warn_re.sub('', errstr).strip() + return (errstr, warnstr) + + def filter_stderr(self, stderr, run_results={}): + """ Filters the output to stderr. run_results[] is a dictionary. + This function will: + - Remove UUUUU... strings, since they are generally not a problem. + - Remove all DDDD and SSSS strings, and add run_results['has_S'] = True + and run_results['has_D'] = True. + - Remove warnings and put them in run_results['warnings'] + - Put the filtered error string into run_results['errors'] and returns the dictionary + """ + errstr, run_results['warnings'] = self.filter_warnings(stderr) + # Scan for underruns and sequence errors / dropped packets not detected in the counter + errstr = re.sub('UU+', '', errstr) + (errstr, n_subs) = re.subn('SS+', '', errstr) + if n_subs: + run_results['has_S'] = True + (errstr, n_subs) = re.subn('DD+', '', errstr) + if n_subs: + run_results['has_D'] = True + errstr = re.sub("\n\n+", "\n", errstr) + run_results['errors'] = errstr.strip() + return run_results + +class uhd_example_test_case(uhd_test_case): + """ + A test case that runs an example. + """ + + def setup_example(self): + """ + Override this to add specific setup code. + """ + pass + + def set_up(self): + """ + """ + self.setup_example() + + def run_test(self, test_name, test_args): + """ + Override this to run the actual example. + + Needs to return either a boolean or a dict with key 'passed' to determine + pass/fail. + """ + raise NotImplementedError + + def run_example(self, example, args): + """ + Run `example' (which has to be a UHD example or utility) with `args'. + Return results and the app object. + """ + self.log.info("Running example: `{example} {args}'".format(example=example, args=" ".join(args))) + app = shell_application(example) + app.run(args) + run_results = { + 'return_code': app.returncode, + 'passed': False, + 'has_D': False, + 'has_S': False, + } + run_results = self.filter_stderr(app.stderr, run_results) + self.log.info('STDERR Output:') + self.log.info(str(app.stderr)) + return (app, run_results) + + + def report_example_results(self, test_name, run_results): + for key in sorted(run_results): + self.log.info('{key} = {val}'.format(key=key, val=run_results[key])) + self.report_result( + test_name, + key, run_results[key] + ) + if run_results.has_key('passed'): + self.report_result( + test_name, + 'status', + 'Passed' if run_results['passed'] else 'Failed', + ) + if run_results.has_key('errors'): + self.report_result( + test_name, + 'errors', + 'Yes' if run_results['errors'] else 'No', + ) + + def test_all(self): + """ + Hook for test runner. Needs to be a class method that starts with 'test'. + Calls run_test(). + """ + for test_name, test_args in self.test_params.iteritems(): + if not test_args.has_key('product') or (self.usrp_info['product'] in test_args.get('products', [])): + run_results = self.run_test(test_name, test_args) + passed = bool(run_results) + if isinstance(run_results, dict): + passed = run_results['passed'] + self.assertTrue( + passed, + msg="Errors occurred during test `{t}'. Check log file for details.\nRun results:\n{r}".format( + t=test_name, r=yaml.dump(run_results, default_flow_style=False) + ) + ) + diff --git a/host/tests/devtest/usrp_probe.py b/host/tests/devtest/usrp_probe.py new file mode 100644 index 000000000..ba3c645e4 --- /dev/null +++ b/host/tests/devtest/usrp_probe.py @@ -0,0 +1,50 @@ +#!/usr/bin/env python +# +# Copyright 2015 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +""" Run uhd_find_devices and parse the output. """ + +import re +import subprocess + +def get_usrp_list(device_filter=None): + """ Returns a list of dicts that contain USRP info """ + try: + if device_filter is not None: + output = subprocess.check_output(['uhd_find_devices', '--args', device_filter]) + else: + output = subprocess.check_output('uhd_find_devices') + except subprocess.CalledProcessError: + return [] + split_re = "\n*-+\n-- .*\n-+\n" + uhd_strings = re.split(split_re, output) + result = [] + for uhd_string in uhd_strings: + if not re.match("Device Address", uhd_string): + continue + this_result = {k: v for k, v in re.findall(" ([a-z]+): (.*)", uhd_string)} + args_string = "" + try: + args_string = "type={},serial={}".format(this_result['type'], this_result['serial']) + except KeyError: + continue + this_result['args'] = args_string + result.append(this_result) + return result + +if __name__ == "__main__": + print get_usrp_list() + print get_usrp_list('type=x300') diff --git a/host/utils/CMakeLists.txt b/host/utils/CMakeLists.txt index 4f56dad0d..1ef7766f9 100644 --- a/host/utils/CMakeLists.txt +++ b/host/utils/CMakeLists.txt @@ -56,10 +56,14 @@ UHD_INSTALL(TARGETS usrp_x3xx_fpga_burner RUNTIME DESTINATION ${RUNTIME_DIR} COM # Utilities that get installed into the share path ######################################################################## SET(util_share_sources + converter_benchmark.cpp query_gpsdo_sensors.cpp usrp_burn_db_eeprom.cpp usrp_burn_mb_eeprom.cpp ) +SET(util_share_sources_py + converter_benchmark.py +) IF(ENABLE_USB) LIST(APPEND util_share_sources fx2_init_eeprom.cpp @@ -109,6 +113,13 @@ FOREACH(util_source ${util_share_sources}) TARGET_LINK_LIBRARIES(${util_name} uhd ${Boost_LIBRARIES}) UHD_INSTALL(TARGETS ${util_name} RUNTIME DESTINATION ${PKG_LIB_DIR}/utils COMPONENT utilities) ENDFOREACH(util_source) +FOREACH(util_source ${util_share_sources_py}) + UHD_INSTALL(PROGRAMS + ${CMAKE_CURRENT_SOURCE_DIR}/${util_source} + DESTINATION ${PKG_LIB_DIR}/utils + COMPONENT utilities + ) +ENDFOREACH(util_source) UHD_INSTALL(TARGETS usrp_n2xx_simple_net_burner RUNTIME DESTINATION ${PKG_LIB_DIR}/utils COMPONENT utilities) UHD_INSTALL(TARGETS usrp_x3xx_fpga_burner RUNTIME DESTINATION ${PKG_LIB_DIR}/utils COMPONENT utilities) diff --git a/host/utils/converter_benchmark.cpp b/host/utils/converter_benchmark.cpp new file mode 100644 index 000000000..251dd6a37 --- /dev/null +++ b/host/utils/converter_benchmark.cpp @@ -0,0 +1,432 @@ +// +// Copyright 2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/safe_main.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/convert.hpp> +#include <uhd/exception.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <boost/timer.hpp> +#include <boost/algorithm/string.hpp> +#include <iostream> +#include <iomanip> +#include <map> + +namespace po = boost::program_options; +using namespace uhd::convert; + +enum buf_init_t { + RANDOM, INC +}; + +// Convert `sc16_item32_le' -> `sc16' +// Finds the first _ in format and returns the string +// until then. Returns the entire string if no _ is found. +std::string format_to_type(const std::string &format) +{ + std::string ret_val = ""; + for (size_t i = 0; i < format.length(); i++) { + if (format[i] == '_') { + return ret_val; + } + ret_val.append(1, format[i]); + } + + return ret_val; +} + +void configure_conv( + converter::sptr conv, + const std::string &in_type, + const std::string &out_type +) { + if (in_type == "sc16") { + if (out_type == "fc32") { + std::cout << "Setting scalar to 32767." << std::endl; + conv->set_scalar(32767.); + return; + } + } + + if (in_type == "fc32") { + if (out_type == "sc16") { + std::cout << "Setting scalar to 32767." << std::endl; + conv->set_scalar(32767.); + return; + } + } + + std::cout << "No configuration required." << std::endl; +} + +template <typename T> +void init_random_vector_complex_float(std::vector<char> &buf_ptr, const size_t n_items) +{ + std::complex<T> * const buf = reinterpret_cast<std::complex<T> * const>(&buf_ptr[0]); + for (size_t i = 0; i < n_items; i++) { + buf[i] = std::complex<T>( + T((std::rand()/double(RAND_MAX/2)) - 1), + T((std::rand()/double(RAND_MAX/2)) - 1) + ); + } +} + +template <typename T> +void init_random_vector_complex_int(std::vector<char> &buf_ptr, const size_t n_items) +{ + std::complex<T> * const buf = reinterpret_cast<std::complex<T> * const>(&buf_ptr[0]); + for (size_t i = 0; i < n_items; i++) { + buf[i] = std::complex<T>(T(std::rand()), T(std::rand())); + } +} + +template <typename T> +void init_random_vector_real_int(std::vector<char> &buf_ptr, size_t n_items) +{ + T * const buf = reinterpret_cast<T * const>(&buf_ptr[0]); + for (size_t i = 0; i < n_items; i++) { + buf[i] = T(std::rand()); + } +} + +// Fill a buffer with increasing numbers +template <typename T> +void init_inc_vector(std::vector<char> &buf_ptr, size_t n_items) +{ + T * const buf = reinterpret_cast<T * const>(&buf_ptr[0]); + for (size_t i = 0; i < n_items; i++) { + buf[i] = T(i); + } +} + +void init_buffers( + std::vector< std::vector<char> > &buf, + const std::string &type, + size_t bytes_per_item, + buf_init_t buf_seed_mode +) { + if (buf.empty()) { + return; + } + size_t n_items = buf[0].size() / bytes_per_item; + + /// Fill with incrementing integers + if (buf_seed_mode == INC) { + for (size_t i = 0; i < buf.size(); i++) { + if (type == "sc8") { + init_inc_vector< std::complex<boost::int8_t> >(buf[i], n_items); + } else if (type == "sc16") { + init_inc_vector< std::complex<boost::int16_t> >(buf[i], n_items); + } else if (type == "sc32") { + init_inc_vector< std::complex<boost::int32_t> >(buf[i], n_items); + } else if (type == "fc32") { + init_inc_vector< std::complex<float> >(buf[i], n_items); + } else if (type == "fc64") { + init_inc_vector< std::complex<double> >(buf[i], n_items); + } else if (type == "s8") { + init_inc_vector< boost::int8_t >(buf[i], n_items); + } else if (type == "s16") { + init_inc_vector< boost::int16_t >(buf[i], n_items); + } else if (type == "item32") { + init_inc_vector< boost::uint32_t >(buf[i], n_items); + init_random_vector_real_int<boost::uint32_t>(buf[i], n_items); + } else { + throw uhd::runtime_error(str( + boost::format("Cannot handle data type: %s") % type + )); + } + } + + return; + } + + assert(buf_seed_mode == RANDOM); + + /// Fill with random data + for (size_t i = 0; i < buf.size(); i++) { + if (type == "sc8") { + init_random_vector_complex_int<boost::int8_t>(buf[i], n_items); + } else if (type == "sc16") { + init_random_vector_complex_int<boost::int16_t>(buf[i], n_items); + } else if (type == "sc32") { + init_random_vector_complex_int<boost::int32_t>(buf[i], n_items); + } else if (type == "fc32") { + init_random_vector_complex_float<float>(buf[i], n_items); + } else if (type == "fc64") { + init_random_vector_complex_float<double>(buf[i], n_items); + } else if (type == "s8") { + init_random_vector_real_int<boost::int8_t>(buf[i], n_items); + } else if (type == "s16") { + init_random_vector_real_int<boost::int16_t>(buf[i], n_items); + } else if (type == "item32") { + init_random_vector_real_int<boost::uint32_t>(buf[i], n_items); + } else { + throw uhd::runtime_error(str( + boost::format("Cannot handle data type: %s") % type + )); + } + } +} + +// Returns time elapsed +double run_benchmark( + converter::sptr conv, + const std::vector<const void *> &input_buf_refs, + const std::vector<void *> &output_buf_refs, + size_t n_items, + size_t iterations +) { + boost::timer benchmark_timer; + for (size_t i = 0; i < iterations; i++) { + conv->conv(input_buf_refs, output_buf_refs, n_items); + } + return benchmark_timer.elapsed(); +} + +template <typename T> +std::string void_ptr_to_hexstring(const void *v_ptr, size_t index) +{ + const T *ptr = reinterpret_cast<const T *>(v_ptr); + return str(boost::format("%X") % ptr[index]); +} + +std::string item_to_hexstring( + const void *v_ptr, + size_t index, + const std::string &type +) { + if (type == "fc32") { + return void_ptr_to_hexstring<uint64_t>(v_ptr, index); + } + else if (type == "sc16" || type == "item32") { + return void_ptr_to_hexstring<uint32_t>(v_ptr, index); + } + else if (type == "sc8" || type == "s16") { + return void_ptr_to_hexstring<uint16_t>(v_ptr, index); + } + else if (type == "u8") { + return void_ptr_to_hexstring<uint8_t>(v_ptr, index); + } + else { + return str(boost::format("<unhandled data type: %s>") % type); + } +} + +std::string item_to_string( + const void *v_ptr, + size_t index, + const std::string &type, + const bool print_hex +) { + if (print_hex) { + return item_to_hexstring(v_ptr, index, type); + } + + if (type == "sc16") { + const std::complex<boost::int16_t> *ptr = reinterpret_cast<const std::complex<boost::int16_t> *>(v_ptr); + return boost::lexical_cast<std::string>(ptr[index]); + } + else if (type == "sc8") { + const std::complex<boost::int8_t> *ptr = reinterpret_cast<const std::complex<boost::int8_t> *>(v_ptr); + return boost::lexical_cast<std::string>(ptr[index]); + } + else if (type == "fc32") { + const std::complex<float> *ptr = reinterpret_cast<const std::complex<float> *>(v_ptr); + return boost::lexical_cast<std::string>(ptr[index]); + } + else if (type == "item32") { + const boost::uint32_t *ptr = reinterpret_cast<const boost::uint32_t *>(v_ptr); + return boost::lexical_cast<std::string>(ptr[index]); + } + else if (type == "s16") { + const boost::int16_t *ptr = reinterpret_cast<const boost::int16_t *>(v_ptr); + return boost::lexical_cast<std::string>(ptr[index]); + } + else { + return str(boost::format("<unhandled data type: %s>") % type); + } +} + +int UHD_SAFE_MAIN(int argc, char *argv[]) +{ + std::string in_format, out_format; + std::string priorities; + std::string seed_mode; + priority_type prio = -1, max_prio; + size_t iterations, n_samples; + size_t n_inputs, n_outputs; + buf_init_t buf_seed_mode = RANDOM; + + /// Command line arguments + po::options_description desc("Converter benchmark options:"); + desc.add_options() + ("help", "help message") + ("in", po::value<std::string>(&in_format), "Input format (e.g. 'sc16')") + ("out", po::value<std::string>(&out_format), "Output format (e.g. 'sc16')") + ("samples", po::value<size_t>(&n_samples)->default_value(1000000), "Number of samples per iteration") + ("iterations", po::value<size_t>(&iterations)->default_value(10000), "Number of iterations per benchmark") + ("priorities", po::value<std::string>(&priorities)->default_value("default"), "Converter priorities. Can be 'default', 'all', or a comma-separated list of priorities.") + ("max-prio", po::value<priority_type>(&max_prio)->default_value(4), "Largest available priority (advanced feature)") + ("n-inputs", po::value<size_t>(&n_inputs)->default_value(1), "Number of input vectors") + ("n-outputs", po::value<size_t>(&n_outputs)->default_value(1), "Number of output vectors") + ("debug-converter", "Skip benchmark and print conversion results. Implies iterations==1 and will only run on a single converter.") + ("seed-mode", po::value<std::string>(&seed_mode)->default_value("random"), "How to initialize the data: random, incremental") + ("hex", "When using debug mode, dump memory in hex") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD Converter Benchmark Tool %s") % desc << std::endl << std::endl; + std::cout << " Use this to benchmark or debug converters." << std::endl + << " When using as a benchmark tool, it will output the execution time\n" + " for every conversion run in CSV format to stdout. Every line between\n" + " the output delimiters {{{ }}} is of the format: <PRIO>,<TIME IN MILLISECONDS>\n" + " When using for converter debugging, every line is formatted as\n" + " <INPUT_VALUE>,<OUTPUT_VALUE>\n" << std::endl; + return EXIT_FAILURE; + } + + // Parse more arguments + if (seed_mode == "incremental") { + buf_seed_mode = INC; + } else if (seed_mode == "random") { + buf_seed_mode = RANDOM; + } else { + std::cout << "Invalid argument: --seed-mode must be either 'incremental' or 'random'." << std::endl; + } + + bool debug_mode = bool(vm.count("debug-converter")); + if (debug_mode) { + iterations = 1; + } + + /// Create the converter(s) ////////////////////////////////////////////// + id_type converter_id; + converter_id.input_format = in_format; + converter_id.output_format = out_format; + converter_id.num_inputs = n_inputs; + converter_id.num_outputs = n_outputs; + std::cout << "Requested converter format: " << converter_id.to_string() + << std::endl; + uhd::dict<priority_type, converter::sptr> conv_list; + if (priorities == "default" or priorities.empty()) { + try { + conv_list[prio] = get_converter(converter_id, prio)(); // Can throw a uhd::key_error + } catch(const uhd::key_error &e) { + std::cout << "No converters found." << std::endl; + return EXIT_FAILURE; + } + } else if (priorities == "all") { + for (priority_type i = 0; i < max_prio; i++) { + try { + // get_converter() returns a factory function, execute that immediately: + converter::sptr conv_for_prio = get_converter(converter_id, i)(); // Can throw a uhd::key_error + conv_list[i] = conv_for_prio; + } catch (...) { + continue; + } + } + } else { // Assume that priorities contains a list of prios (e.g. 0,2,3) + std::vector<std::string> prios_in_list; + boost::split( + prios_in_list, + priorities, + boost::is_any_of(","), // Split at , + boost::token_compress_on // Avoid empty results + ); + BOOST_FOREACH(const std::string &this_prio, prios_in_list) { + size_t prio_index = boost::lexical_cast<size_t>(this_prio); + converter::sptr conv_for_prio = get_converter(converter_id, prio_index)(); // Can throw a uhd::key_error + conv_list[prio_index] = conv_for_prio; + } + } + std::cout << "Found " << conv_list.size() << " converter(s)." << std::endl; + + /// Create input and output buffers /////////////////////////////////////// + // First, convert the types to plain types (e.g. sc16_item32_le -> sc16) + const std::string in_type = format_to_type(in_format); + const std::string out_type = format_to_type(out_format); + const size_t in_size = get_bytes_per_item(in_type); + const size_t out_size = get_bytes_per_item(out_type); + // Create the buffers and fill them with random data & zeros, respectively + std::vector< std::vector<char> > input_buffers(n_inputs, std::vector<char>(in_size * n_samples, 0)); + std::vector< std::vector<char> > output_buffers(n_outputs, std::vector<char>(out_size * n_samples, 0)); + init_buffers(input_buffers, in_type, in_size, buf_seed_mode); + // Create ref vectors for the converter: + std::vector<const void *> input_buf_refs(n_inputs); + std::vector<void *> output_buf_refs(n_outputs); + for (size_t i = 0; i < n_inputs; i++) { + input_buf_refs[i] = reinterpret_cast<const void *>(&input_buffers[i][0]); + } + for (size_t i = 0; i < n_outputs; i++) { + output_buf_refs[i] = reinterpret_cast<void *>(&output_buffers[i][0]); + } + + /// Final configurations to the converter: + std::cout << "Configuring converters:" << std::endl; + BOOST_FOREACH(priority_type prio_i, conv_list.keys()) { + std::cout << "* [" << prio_i << "]: "; + configure_conv(conv_list[prio_i], in_type, out_type); + } + + /// Run the benchmark for every converter //////////////////////////////// + std::cout << "{{{" << std::endl; + if (not debug_mode) { + std::cout << "prio,duration_ms,avg_duration_ms,n_samples,iterations" << std::endl; + BOOST_FOREACH(priority_type prio_i, conv_list.keys()) { + double duration = run_benchmark( + conv_list[prio_i], + input_buf_refs, + output_buf_refs, + n_samples, + iterations + ); + std::cout << boost::format("%i,%d,%d,%d,%d") + % prio_i + % (duration * 1000) + % (duration * 1000.0 / iterations) + % n_samples + % iterations + << std::endl; + } + } + + /// Or run debug mode, which runs one conversion and prints the results //// + if (debug_mode) { + // Only run on the first converter: + run_benchmark( + conv_list[conv_list.keys().at(0)], + input_buf_refs, + output_buf_refs, + n_samples, + iterations + ); + for (size_t i = 0; i < n_samples; i++) { + std::cout << item_to_string(input_buf_refs[0], i, in_type, vm.count("hex")) + << ";" + << item_to_string(reinterpret_cast< const void * >(output_buf_refs[0]), i, out_type, vm.count("hex")) + << std::endl; + } + } + std::cout << "}}}" << std::endl; + + return EXIT_SUCCESS; +} diff --git a/host/utils/converter_benchmark.py b/host/utils/converter_benchmark.py new file mode 100644 index 000000000..c3cab8753 --- /dev/null +++ b/host/utils/converter_benchmark.py @@ -0,0 +1,193 @@ +#!/usr/bin/env python +# +# Copyright 2015 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +""" +Wrap the converter_benchmark tool and produce prettier results. +""" + +from __future__ import print_function +import argparse +import csv +import subprocess + +INTRO_SETUP = { + 'n_samples': { + 'title': 'Samples per iteration', + }, + 'iterations': { + 'title': 'Number of iterations' + }, +} + +TABLE_SETUP = { + 'prio': { + 'title': 'Priority', + }, + 'duration_ms': { + 'title': 'Total Duration (ms)', + }, + 'avg_duration_ms': { + 'title': 'Avg. Duration (ms)', + }, +} + +def run_benchmark(args): + """ Run the tool with the given arguments, return the section in the {{{ }}} brackets """ + call_args = ['./converter_benchmark',] + for k, v in args.__dict__.iteritems(): + k = k.replace('_', '-') + if v is None: + continue + if k in ('debug-converter', 'hex'): + if v: + call_args.append('--{0}'.format(k)) + continue + call_args.append('--{0}'.format(k)) + call_args.append(str(v)) + print(call_args) + try: + output = subprocess.check_output(call_args) + except subprocess.CalledProcessError as ex: + print(ex.output) + exit(ex.returncode) + header_out, csv_output = output.split('{{{', 1) + csv_output = csv_output.split('}}}', 1) + assert len(csv_output) == 2 and csv_output[1].strip() == '' + return header_out, csv_output[0] + +def print_stats_table(args, csv_output): + """ + Print stats. + """ + reader = csv.reader(csv_output.strip().split('\n'), delimiter=',') + title_row = reader.next() + row_widths = [0,] * len(TABLE_SETUP) + for idx, row in enumerate(reader): + if idx == 0: + # Print intro: + for k, v in INTRO_SETUP.iteritems(): + print("{title}: {value}".format( + title=v['title'], + value=row[title_row.index(k)], + )) + print("") + # Print table header + for idx, item in enumerate(TABLE_SETUP): + print(" {title} ".format(title=TABLE_SETUP[item]['title']), end='') + row_widths[idx] = len(TABLE_SETUP[item]['title']) + if idx < len(TABLE_SETUP) - 1: + print("|", end='') + print("") + for idx, item in enumerate(TABLE_SETUP): + print("-" * (row_widths[idx] + 2), end='') + if idx < len(TABLE_SETUP) - 1: + print("+", end='') + print("") + # Print actual row data + for idx, item in enumerate(TABLE_SETUP): + format_str = " {{item:>{n}}} ".format(n=row_widths[idx]) + print(format_str.format(item=row[title_row.index(item)]), end='') + if idx < len(TABLE_SETUP) - 1: + print("|", end='') + print("") + +def print_debug_table(args, csv_output): + """ + Print debug output. + """ + reader = csv.reader(csv_output.strip().split('\n'), delimiter=';') + print_widths_hex = { + 'u8': 2, + 'sc16': 8, + 'fc32': 16, + 's16': 4, + } + if args.hex: + format_str = "{{0[0]:0>{n_in}}} => {{0[1]:0>{n_out}}}".format( + n_in=print_widths_hex[getattr(args, 'in').split('_', 1)[0]], + n_out=print_widths_hex[args.out.split('_', 1)[0]] + ) + else: + format_str = "{0[0]}\t=>\t{0[1]}" + for row in reader: + print(format_str.format(row)) + +def setup_argparse(): + """ Configure arg parser. """ + parser = argparse.ArgumentParser( + description="UHD Converter Benchmark + Debugging Utility.", + ) + parser.add_argument( + "-i", "--in", required=True, + help="Input format (e.g. 'sc16')" + ) + parser.add_argument( + "-o", "--out", required=True, + help="Output format (e.g. 'sc16')" + ) + parser.add_argument( + "-s", "--samples", type=int, + help="Number of samples per iteration" + ) + parser.add_argument( + "-N", "--iterations", type=int, + help="Number of iterations per benchmark", + ) + parser.add_argument( + "-p", "--priorities", + help="Converter priorities. Can be 'default', 'all', or a comma-separated list of priorities.", + ) + parser.add_argument( + "--max-prio", type=int, + help="Largest available priority (advanced feature)", + ) + parser.add_argument( + "--n-inputs", type=int, + help="Number of input vectors", + ) + parser.add_argument( + "--n-outputs", type=int, + help="Number of output vectors", + ) + parser.add_argument( + "--seed-mode", choices=('random', 'incremental'), + help="How to initialize the data: random, incremental", + ) + parser.add_argument( + "--debug-converter", action='store_true', + help="Skip benchmark and print conversion results. Implies iterations==1 and will only run on a single converter.", + ) + parser.add_argument( + "--hex", action='store_true', + help="In debug mode, display data as hex values.", + ) + return parser + +def main(): + """ Go, go, go! """ + args = setup_argparse().parse_args() + print("Running converter benchmark...") + header_out, csv_output = run_benchmark(args) + print(header_out) + if args.debug_converter: + print_debug_table(args, csv_output) + else: + print_stats_table(args, csv_output) + +if __name__ == "__main__": + main() + |