diff options
Diffstat (limited to 'host')
| -rw-r--r-- | host/lib/usrp/usrp2/mboard_impl.cpp | 13 | ||||
| -rw-r--r-- | host/lib/usrp/usrp2/usrp2_regs.hpp | 20 |
2 files changed, 28 insertions, 5 deletions
diff --git a/host/lib/usrp/usrp2/mboard_impl.cpp b/host/lib/usrp/usrp2/mboard_impl.cpp index 48aeb2a62..2c8fd2df4 100644 --- a/host/lib/usrp/usrp2/mboard_impl.cpp +++ b/host/lib/usrp/usrp2/mboard_impl.cpp @@ -63,6 +63,13 @@ void usrp2_impl::mboard_init(void){ boost::uint16_t data = ad9777_regs.get_write_reg(addr); _iface->transact_spi(SPI_SS_AD9777, spi_config_t::EDGE_RISE, data, 16, false /*no rb*/); } + + //enable ADCs + _iface->poke32(FR_MISC_CTRL_ADC, FRF_MISC_CTRL_ADC_ON); + + //set up serdes + _iface->poke32(FR_MISC_CTRL_SERDES, FRF_MISC_CTRL_SERDES_ENABLE | FRF_MISC_CTRL_SERDES_RXEN); + } void usrp2_impl::init_clock_config(void){ @@ -97,9 +104,9 @@ void usrp2_impl::update_clock_config(void){ //clock source ref 10mhz switch(_clock_config.ref_source){ - case clock_config_t::REF_INT : _iface->poke32(FR_CLOCK_CONTROL, 0x10); break; - case clock_config_t::REF_SMA : _iface->poke32(FR_CLOCK_CONTROL, 0x1C); break; - case clock_config_t::REF_MIMO: _iface->poke32(FR_CLOCK_CONTROL, 0x15); break; + case clock_config_t::REF_INT : _iface->poke32(FR_MISC_CTRL_CLOCK, 0x10); break; + case clock_config_t::REF_SMA : _iface->poke32(FR_MISC_CTRL_CLOCK, 0x1C); break; + case clock_config_t::REF_MIMO: _iface->poke32(FR_MISC_CTRL_CLOCK, 0x15); break; default: throw std::runtime_error("usrp2: unhandled clock configuration reference source"); } diff --git a/host/lib/usrp/usrp2/usrp2_regs.hpp b/host/lib/usrp/usrp2/usrp2_regs.hpp index 67a342217..feeccaa34 100644 --- a/host/lib/usrp/usrp2/usrp2_regs.hpp +++ b/host/lib/usrp/usrp2/usrp2_regs.hpp @@ -64,7 +64,23 @@ ///////////////////////////////////////////////// // Misc Control //////////////////////////////////////////////// -#define FR_CLOCK_CONTROL _SR_ADDR(0) +#define FR_MISC_CTRL_CLOCK _SR_ADDR(0) +#define FR_MISC_CTRL_SERDES _SR_ADDR(1) +#define FR_MISC_CTRL_ADC _SR_ADDR(2) +#define FR_MISC_CTRL_LEDS _SR_ADDR(3) +#define FR_MISC_CTRL_PHY _SR_ADDR(4) // LSB is reset line to eth phy +#define FR_MISC_CTRL_DBG_MUX _SR_ADDR(5) +#define FR_MISC_CTRL_RAM_PAGE _SR_ADDR(6) // FIXME should go somewhere else... +#define FR_MISC_CTRL_FLUSH_ICACHE _SR_ADDR(7) // Flush the icache +#define FR_MISC_CTRL_LED_SRC _SR_ADDR(8) // HW or SW control for LEDs + +#define FRF_MISC_CTRL_SERDES_ENABLE 8 +#define FRF_MISC_CTRL_SERDES_PRBSEN 4 +#define FRF_MISC_CTRL_SERDES_LOOPEN 2 +#define FRF_MISC_CTRL_SERDES_RXEN 1 + +#define FRF_MISC_CTRL_ADC_ON 0x0F +#define FRF_MISC_CTRL_ADC_OFF 0x00 ///////////////////////////////////////////////// // VITA49 64 bit time (write only) @@ -208,7 +224,7 @@ #define FR_ATR_FULL_RXSIDE FR_ATR_BASE + 14 /////////////////////////////////////////////////// -// ATR Controller, Slave 11 +// VITA RX CTRL regs /////////////////////////////////////////////////// // The following 3 are logically a single command register. // They are clocked into the underlying fifo when time_ticks is written. |