diff options
Diffstat (limited to 'host')
| -rw-r--r-- | host/lib/usrp/dboard/db_dbsrx.cpp | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/host/lib/usrp/dboard/db_dbsrx.cpp b/host/lib/usrp/dboard/db_dbsrx.cpp index b1cee4aa7..9d04d8e16 100644 --- a/host/lib/usrp/dboard/db_dbsrx.cpp +++ b/host/lib/usrp/dboard/db_dbsrx.cpp @@ -179,7 +179,7 @@ dbsrx::dbsrx(ctor_args_t args) : rx_dboard_base(args){ "DBSRX: incorrect dbid\n" "Expected dbid 0x0002 and R193\n" "found dbid == %d\n" - "Please see the daughterboard app notes" + "Please see the daughterboard app notes" ) % this->get_rx_id().to_pp_string(); //warn user about incorrect DBID on non-USRP1, requires R194 populated @@ -188,7 +188,7 @@ dbsrx::dbsrx(ctor_args_t args) : rx_dboard_base(args){ "DBSRX: incorrect dbid\n" "Expected dbid 0x000D and R194\n" "found dbid == %d\n" - "Please see the daughterboard app notes" + "Please see the daughterboard app notes" ) % this->get_rx_id().to_pp_string(); //send initial register settings @@ -305,13 +305,13 @@ double dbsrx::set_lo_freq(double target_freq){ goto done_loop; } - } + } done_loop: - //Assert because we failed to find a suitable combination of ref_clock, R and N + //Assert because we failed to find a suitable combination of ref_clock, R and N UHD_ASSERT_THROW(ref_clock <= 27.0e6 and ref_clock >= 0.0); - UHD_ASSERT_THROW(ref_clock/m >= 1e6 and ref_clock/m <= 2.5e6); + UHD_ASSERT_THROW(m and ref_clock/m >= 1e6 and ref_clock/m <= 2.5e6); UHD_ASSERT_THROW((pfd_freq >= dbsrx_pfd_freq_range.start()) and (pfd_freq <= dbsrx_pfd_freq_range.stop())); UHD_ASSERT_THROW((N >= 256) and (N <= 32768)); @@ -332,7 +332,7 @@ double dbsrx::set_lo_freq(double target_freq){ _max2118_write_regs.r_divider = (max2118_write_regs_t::r_divider_t) r; _max2118_write_regs.set_n_divider(N); _max2118_write_regs.ade_vco_ade_read = max2118_write_regs_t::ADE_VCO_ADE_READ_ENABLED; - + //compute prescaler variables int scaler = actual_freq > 1125e6 ? 2 : 4; _max2118_write_regs.div2 = scaler == 4 ? max2118_write_regs_t::DIV2_DIV4 : max2118_write_regs_t::DIV2_DIV2; @@ -377,7 +377,7 @@ double dbsrx::set_lo_freq(double target_freq){ if (_max2118_read_regs.adc == 0){ if (_max2118_write_regs.osc_band == 0){ UHD_MSG(warning) << boost::format( - "DBSRX: Tuning exceeded vco range, _max2118_write_regs.osc_band == %d\n" + "DBSRX: Tuning exceeded vco range, _max2118_write_regs.osc_band == %d\n" ) % int(_max2118_write_regs.osc_band); UHD_ASSERT_THROW(_max2118_read_regs.adc != 0); //just to cause a throw } @@ -389,7 +389,7 @@ double dbsrx::set_lo_freq(double target_freq){ if (_max2118_read_regs.adc == 7){ if (_max2118_write_regs.osc_band == 7){ UHD_MSG(warning) << boost::format( - "DBSRX: Tuning exceeded vco range, _max2118_write_regs.osc_band == %d\n" + "DBSRX: Tuning exceeded vco range, _max2118_write_regs.osc_band == %d\n" ) % int(_max2118_write_regs.osc_band); UHD_ASSERT_THROW(_max2118_read_regs.adc != 7); //just to cause a throw } @@ -408,7 +408,7 @@ double dbsrx::set_lo_freq(double target_freq){ //allow for setup time before checking condition again boost::this_thread::sleep(boost::posix_time::milliseconds(10)); } - + UHD_LOGV(often) << boost::format( "DBSRX: final vco %d, vtune adc %d" ) % int(_max2118_write_regs.osc_band) % int(_max2118_read_regs.adc) << std::endl; @@ -417,7 +417,7 @@ double dbsrx::set_lo_freq(double target_freq){ if (_max2118_read_regs.adc <= 2) _max2118_write_regs.cp_current = max2118_write_regs_t::CP_CURRENT_I_CP_100UA; else if (_max2118_read_regs.adc >= 5) _max2118_write_regs.cp_current = max2118_write_regs_t::CP_CURRENT_I_CP_400UA; else _max2118_write_regs.cp_current = max2118_write_regs_t::CP_CURRENT_I_CP_200UA; - + //update charge pump bias current setting send_reg(0x2, 0x2); @@ -524,7 +524,7 @@ double dbsrx::set_bandwidth(double bandwidth){ bandwidth = dbsrx_bandwidth_range.clip(bandwidth); double ref_clock = this->get_iface()->get_clock_rate(dboard_iface::UNIT_RX); - + //NOTE: _max2118_write_regs.m_divider set in set_lo_freq //compute f_dac setting |