diff options
Diffstat (limited to 'host')
| -rw-r--r-- | host/lib/usrp/dboard/db_tvrx2.cpp | 33 | ||||
| -rw-r--r-- | host/lib/usrp/multi_usrp.cpp | 11 |
2 files changed, 36 insertions, 8 deletions
diff --git a/host/lib/usrp/dboard/db_tvrx2.cpp b/host/lib/usrp/dboard/db_tvrx2.cpp index 0bfa5229a..df35b0f7c 100644 --- a/host/lib/usrp/dboard/db_tvrx2.cpp +++ b/host/lib/usrp/dboard/db_tvrx2.cpp @@ -702,7 +702,9 @@ static const std::vector<tvrx2_tda18272_freq_map_t> tvrx2_tda18272_freq_map = li ( tvrx2_tda18272_freq_map_t(969728000, 0x00, 0x0A, 3) ) ; -static const freq_range_t tvrx2_freq_range(42e6, 870e6); +static const freq_range_t tvrx2_rf_freq_range(42e6, 870e6); + +static const freq_range_t tvrx2_lo_offset_range(25e3, 12.5e6); static const freq_range_t tvrx2_bandwidth_range = list_of (range_t(1.7e6)) @@ -768,6 +770,7 @@ private: bool set_enabled(bool); double set_lo_freq(double target_freq); + double set_lo_offset(double lo_offset); double set_gain(double gain, const std::string &name); double set_bandwidth(double bandwidth); @@ -971,7 +974,7 @@ tvrx2::tvrx2(ctor_args_t args) : rx_dboard_base(args){ this->get_rx_subtree()->create<double>("freq/value") .coerce(boost::bind(&tvrx2::set_lo_freq, this, _1)); this->get_rx_subtree()->create<meta_range_t>("freq/range") - .set(tvrx2_freq_range); + .set(tvrx2_rf_freq_range); this->get_rx_subtree()->create<std::string>("antenna/value") .set(tvrx2_sd_name_to_antennas[get_subdev_name()]); this->get_rx_subtree()->create<std::vector<std::string> >("antenna/options") @@ -982,7 +985,12 @@ tvrx2::tvrx2(ctor_args_t args) : rx_dboard_base(args){ .coerce(boost::bind(&tvrx2::set_enabled, this, _1)) .set(_enabled); this->get_rx_subtree()->create<bool>("use_lo_offset") - .set(false); + .set(true); + this->get_rx_subtree()->create<double>("lo_offset/value") + .coerce(boost::bind(&tvrx2::set_lo_offset, this, _1)) + .set(-_if_freq/2.0); + this->get_rx_subtree()->create<meta_range_t>("lo_offset/range") + .set(tvrx2_lo_offset_range); this->get_rx_subtree()->create<double>("bandwidth/value") .coerce(boost::bind(&tvrx2::set_bandwidth, this, _1)) .set(_bandwidth); @@ -1051,7 +1059,7 @@ bool tvrx2::set_enabled(bool enable){ //setup tuner parameters transition_1(); - transition_2(int(tvrx2_freq_range.start())); + transition_2(int(tvrx2_rf_freq_range.start())); test_rf_filter_robustness(); @@ -1065,7 +1073,7 @@ bool tvrx2::set_enabled(bool enable){ //transition_2 equivalent this->get_rx_subtree()->access<double>("freq/value") - .set(tvrx2_freq_range.start()); + .set(tvrx2_rf_freq_range.start()); //enter standby mode transition_3(); @@ -1101,6 +1109,8 @@ double tvrx2::get_scaled_rf_freq(void){ void tvrx2::set_scaled_if_freq(double if_freq){ _tda18272hnm_regs.if_freq = int(_freq_scalar*if_freq/(50e3)); //max 12.8MHz?? + send_reg(0x15, 0x15); + _if_freq = get_scaled_if_freq(); } double tvrx2::get_scaled_if_freq(void){ @@ -1722,14 +1732,14 @@ void tvrx2::wait_irq(void){ * Tuning **********************************************************************/ double tvrx2::set_lo_freq(double target_freq){ - //target_freq = std::clip(target_freq, tvrx2_freq_range.min, tvrx2_freq_range.max); + //target_freq = std::clip(target_freq, tvrx2_rf_freq_range.min, tvrx2_rf_freq_range.max); read_reg(0x6, 0x6); if (_tda18272hnm_regs.sm == tda18272hnm_regs_t::SM_STANDBY) { - transition_2(int(target_freq + _bandwidth/2 - get_scaled_if_freq())); + transition_2(int(target_freq + get_scaled_if_freq())); } else { - transition_4(int(target_freq + _bandwidth/2 - get_scaled_if_freq())); + transition_4(int(target_freq + get_scaled_if_freq())); } read_reg(0x16, 0x18); @@ -1755,6 +1765,13 @@ double tvrx2::set_lo_freq(double target_freq){ return _lo_freq; } +double tvrx2::set_lo_offset(double lo_offset){ + lo_offset = tvrx2_lo_offset_range.clip(lo_offset); + set_scaled_if_freq(-lo_offset*2.0); + return -get_scaled_if_freq()/2.0; +} + + /*********************************************************************** * Gain Handling **********************************************************************/ diff --git a/host/lib/usrp/multi_usrp.cpp b/host/lib/usrp/multi_usrp.cpp index 1267da89c..7f61565fc 100644 --- a/host/lib/usrp/multi_usrp.cpp +++ b/host/lib/usrp/multi_usrp.cpp @@ -129,6 +129,9 @@ static tune_result_t tune_xx_subdev_and_dsp( //------------------------------------------------------------------ double lo_offset = 0.0; if (rf_fe_subtree->access<bool>("use_lo_offset").get()){ + //If the frontend has lo_offset value and range properties, trust it for lo_offset + if (rf_fe_subtree->exists("lo_offset/value")) lo_offset = rf_fe_subtree->access<double>("lo_offset/value").get(); + //If the local oscillator will be in the passband, use an offset. //But constrain the LO offset by the width of the filter bandwidth. const double rate = dsp_subtree->access<double>("rate/value").get(); @@ -147,6 +150,14 @@ static tune_result_t tune_xx_subdev_and_dsp( break; case tune_request_t::POLICY_MANUAL: + //If the rf_fe understands lo_offset settings, infer the desired lo_offset and set it + // Side effect: In TVRX2 for example, after setting the lo_offset (if_freq) with a + // POLICY_MANUAL, there is no way for the user to automatically get back to default + // if_freq without deconstruct/reconstruct the rf_fe objects. + if (rf_fe_subtree->exists("lo_offset/value")) { + rf_fe_subtree->access<double>("lo_offset/value").set(tune_request.rf_freq - tune_request.target_freq); + } + target_rf_freq = tune_request.rf_freq; rf_fe_subtree->access<double>("freq/value").set(target_rf_freq); break; |