diff options
Diffstat (limited to 'host')
| -rw-r--r-- | host/docs/CMakeLists.txt | 1 | ||||
| -rw-r--r-- | host/docs/images.rst | 104 | ||||
| -rw-r--r-- | host/docs/index.rst | 1 | ||||
| -rw-r--r-- | host/docs/usrp2.rst | 36 |
4 files changed, 106 insertions, 36 deletions
diff --git a/host/docs/CMakeLists.txt b/host/docs/CMakeLists.txt index d0041f71c..b4383f88d 100644 --- a/host/docs/CMakeLists.txt +++ b/host/docs/CMakeLists.txt @@ -24,6 +24,7 @@ SET(manual_sources coding.rst dboards.rst general.rst + images.rst usrp2.rst ) diff --git a/host/docs/images.rst b/host/docs/images.rst new file mode 100644 index 000000000..ff5c5404e --- /dev/null +++ b/host/docs/images.rst @@ -0,0 +1,104 @@ +======================================================================== +UHD - Firmware and FPGA Image Application Notes +======================================================================== + +.. contents:: Table of Contents + +------------------------------------------------------------------------ +Images Overview +------------------------------------------------------------------------ +Every USRP device must be loaded with special firmware and FPGA images. +The methods of loading images into the device varies among devices: + +* **USRP1:** The host code will automatically load the firmware and FPGA at runtime. +* **USRP2:** The user must manually write the images onto the USRP2 SD card. + +------------------------------------------------------------------------ +Pre-built images +------------------------------------------------------------------------ + +Pre-built images are available for download. +See the UHD wiki for the download link. + +The pre-built images come in platform-specific installer packages +and platform-independent archive files: + +* **Linux:** DEB or RPM installer +* **Windows:** not available yet... +* **Macintosh:** not available yet... +* **Platform-independent:** ZIP or TAR.GZ archive + +^^^^^^^^^^^^^^^^^^ +Linux installers +^^^^^^^^^^^^^^^^^^ +The Linux-based installers will install the images into /usr/share/uhd/images. +On a Linux system, the UHD will always search this path for image files. + +Commands to install a linux rpm or deb package: + +:: + + sudo rpm -i <linux-images-installer>.rpm + + -- OR -- + + sudo dpkg -i <linux-images-installer>.deb + +^^^^^^^^^^^^^^^^^^^^^^ +Archive install +^^^^^^^^^^^^^^^^^^^^^^ +When installing images from an archive, there are two options: + +**Option 1:** + +Unpack the archive into the UHD installation prefix. +The UHD will always search <prefix>/share/uhd/images for image files. +Where <prefix> was set by the CMAKE_INSTALL_PREFIX at configure-time. + +**Option 2:** + +Unpack the archive anywhere and set the UHD_IMAGE_PATH environment variable. +The UHD_IMAGE_PATH may contain a list of directories to search for image files, +or paths to specific image files. + +------------------------------------------------------------------------ +Building images +------------------------------------------------------------------------ + +The UHD source repository comes with the source code necessary to build +both firmware and FPGA images for all supported devices. +The build commands for a particular image can be found in <uhd-repo-path>/images/Makefile. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Xilinx FPGA builds +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Xilinx ISE 12.x and up is required to build the Xilinx FPGA images. +The build requires that you have a unix-like environment with make. +Make sure that xtclsh from the Xilinx ISE bin directory is in your $PATH. + +See <uhd-repo-path>/fpga/usrp2/top/* + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Microblaze firmware builds +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The Microblaze GCC compiler from the Xilinx EDK is required to build the Microblaze firmware images. +The build requires that you have a unix-like environment with autotools and make. +Make sure that mb-gcc from the Xilinx EDK/microblaze directory is in your $PATH. + +See <uhd-repo-path>/firmware/microblaze + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Altera FPGA builds +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Quartus is required to build the Altera FPGA images. +Pre-built images can also be found in <uhd-repo-path>/fpga/usrp1/rbf + +See <uhd-repo-path>/fpga/usrp1/toplevel/* + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +FX2 firmware builds +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The sdcc compiler is required to build the FX2 firmware images. +The build requires that you have a unix-like environment with autotools and make. + +See <uhd-repo-path>/firmware/fx2 diff --git a/host/docs/index.rst b/host/docs/index.rst index b31a3d0ac..6973ede19 100644 --- a/host/docs/index.rst +++ b/host/docs/index.rst @@ -21,6 +21,7 @@ Building the UHD Application Notes ^^^^^^^^^^^^^^^^^^^^^ * `General App Notes <./general.html>`_ +* `Firmware and FPGA Image Notes <./images.html>`_ * `USRP2 App Notes <./usrp2.html>`_ * `Daughterboard App Notes <./dboards.html>`_ diff --git a/host/docs/usrp2.rst b/host/docs/usrp2.rst index bc4ea0e44..3ac326f58 100644 --- a/host/docs/usrp2.rst +++ b/host/docs/usrp2.rst @@ -5,42 +5,6 @@ UHD - USRP2 Application Notes .. contents:: Table of Contents ------------------------------------------------------------------------ -Building firmware and FPGA images ------------------------------------------------------------------------- - -^^^^^^^^^^^^^^^^^^ -FPGA Image -^^^^^^^^^^^^^^^^^^ -Xilinx ISE 10.1 and up is required to build the FPGA image for the USRP2. -The build requires that you have a unix-like environment with make. -Make sure that xtclsh from the Xilinx ISE bin directory is in your $PATH. - -Run the following commands: -:: - - cd <uhd-repo-path>/fpga/usrp2/top/u2_rev3 - make -f Makefile.udp bin - -*The image file will be ./build/u2_rev3.bin* - -^^^^^^^^^^^^^^^^^^ -Firmware Image -^^^^^^^^^^^^^^^^^^ -The Microblaze GCC compiler from the Xilinx EDK is required to build the firmware. -The build requires that you have a unix-like environment with autotools and make. -Make sure that mb-gcc from the Xilinx EDK/microblaze directory is in your $PATH. - -Run the following commands: -:: - - cd <uhd-repo-path>/firmware/microblaze - ./boostrap - ./configure --host=mb - make - -*The image file will be ./usrp2/usrp2_txrx_uhd.bin* - ------------------------------------------------------------------------- Load the images onto the SD card ------------------------------------------------------------------------ **Warning!** |