diff options
Diffstat (limited to 'host')
| -rw-r--r-- | host/docs/build.rst | 21 | ||||
| -rw-r--r-- | host/docs/usrp1.rst | 35 | ||||
| -rw-r--r-- | host/docs/usrp2.rst | 2 | ||||
| -rw-r--r-- | host/include/uhd/transport/usb_control.hpp | 4 | ||||
| -rw-r--r-- | host/include/uhd/transport/usb_zero_copy.hpp | 24 | ||||
| -rw-r--r-- | host/include/uhd/usrp/dboard_iface.hpp | 9 | ||||
| -rw-r--r-- | host/lib/transport/libusb1_control.cpp | 2 | ||||
| -rw-r--r-- | host/lib/transport/libusb1_zero_copy.cpp | 140 | ||||
| -rw-r--r-- | host/lib/usrp/usrp1/dboard_iface.cpp | 5 | ||||
| -rw-r--r-- | host/lib/usrp/usrp1/usrp1_ctrl.cpp | 11 | ||||
| -rw-r--r-- | host/lib/usrp/usrp1/usrp1_impl.cpp | 41 | ||||
| -rw-r--r-- | host/lib/usrp/usrp2/dboard_iface.cpp | 4 |
12 files changed, 197 insertions, 101 deletions
diff --git a/host/docs/build.rst b/host/docs/build.rst index f37b5dce7..9cf37db4a 100644 --- a/host/docs/build.rst +++ b/host/docs/build.rst @@ -58,7 +58,8 @@ LibUSB * **Purpose:** USB-based hardware support * **Version:** at least 1.0 * **Usage:** build time + run time (optional) -* **Download URL:** http://www.libusb.org/ +* **Download URL:** http://sourceforge.net/projects/libusb/files/libusb-1.0/ +* **Download URL (windows binaries):** http://www.libusb.org/wiki/windows_backend#LatestBinarySnapshots ^^^^^^^^^^^^^^^^ Python @@ -152,6 +153,19 @@ Generate the project with cmake * Click generate and a project file will be created in the build directory. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +LibUSB cmake notes +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +On Windows, cmake does not have the advantage of pkg-config, +so we must manually tell cmake how to locate the LibUSB header and lib. + +From the cmake gui, select "Advanded View": + +* Set LIBUSB_INCLUDE_DIR to the directory with "libusb.h". +* Set LIBUSB_LIBRARIES to the full path for "libusb-1.0.lib". + +Then check the boxes to enable USRP1 support, click configure and generate. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Build the project in MSVC ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ * Open the generated project file in MSVC. @@ -177,3 +191,8 @@ Setup the PATH environment variable ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ * Add the boost library path to %PATH% (usually c:\\program files\\boost\\<version>\\lib) * Add the uhd library path to %PATH% (usually c:\\program files\\uhd\\lib) +* Add the libusb library to %PATH% (if using usb support) + +**Note:** +The interface for editing environment variable paths in Windows is very poor. +I recommend using "Rapid Environment Editor" (http://www.rapidee.com) over the default editor. diff --git a/host/docs/usrp1.rst b/host/docs/usrp1.rst index 3c1431d30..0baa93a45 100644 --- a/host/docs/usrp1.rst +++ b/host/docs/usrp1.rst @@ -60,6 +60,29 @@ Example device address string representations to specify non-standard firmware a fpga=usrp1_fpga_4rx.rbf, fw=usrp1_fw_custom.ihx +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Change USB transfer parameters +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The advanced user may manipulate parameters of the usb bulk transfers +for various reasons, such as lowering latency or increasing buffer size. +By default, the UHD will use values for these parameters +that are known to perform well on a variety of systems. +The following device address parameters can be used to manipulate USB bulk transfers: + +* **recv_xfer_size:** the size of each receive bulk transfer in bytes +* **recv_num_xfers:** the number of simultaneous receive bulk transfers +* **send_xfer_size:** the size of each send bulk transfer in bytes +* **send_num_xfers:** the number of simultaneous send bulk transfers + +Example usage, set the device address markup string to the following: +:: + + serial=12345678, recv_num_xfers=16 + + -- OR -- + + serial=12345678, recv_xfer_size=2048, recv_num_xfers=16 + ------------------------------------------------------------------------ Specifying the subdevice to use ------------------------------------------------------------------------ @@ -100,10 +123,10 @@ OS Specific Notes ------------------------------------------------------------------------ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -Setup Udev on Linux +Linux - setup udev ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -On Linux, Udev handles USB plug and unplug events. -The following command creates a Udev rule for the USRP1 +On Linux, udev handles USB plug and unplug events. +The following commands create a udev rule for the USRP1 so that non-root users may access the device: :: @@ -113,3 +136,9 @@ so that non-root users may access the device: sudo mv tmpfile /etc/udev/rules.d/10-usrp.rules sudo udevadm control --reload-rules +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Windows - install driver +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +On Windows, a driver must be installed the first time the USRP1 is attached to the host computer. +A download link for this driver can be found on the UHD wiki page. +Download and unpack the driver, and direct the Windows driver install wizard to the .inf file. diff --git a/host/docs/usrp2.rst b/host/docs/usrp2.rst index 72a919d1a..70e5ea28b 100644 --- a/host/docs/usrp2.rst +++ b/host/docs/usrp2.rst @@ -201,7 +201,7 @@ Each parameter will accept a numeric value for the number of bytes. * recv_buff_size * send_buff_size -Example, set the args string to the following: +Example usage, set the device address markup string to the following: :: addr=192.168.10.2, recv_buff_size=100e6 diff --git a/host/include/uhd/transport/usb_control.hpp b/host/include/uhd/transport/usb_control.hpp index 6137ecf84..f9829c3ec 100644 --- a/host/include/uhd/transport/usb_control.hpp +++ b/host/include/uhd/transport/usb_control.hpp @@ -50,9 +50,9 @@ public: * \param index 2-byte (wIndex) * \param buff buffer to hold send or receive data * \param length 2-byte (wLength) - * \return number of bytes submitted + * \return number of bytes submitted or error code */ - virtual size_t submit(boost::uint8_t request_type, + virtual ssize_t submit(boost::uint8_t request_type, boost::uint8_t request, boost::uint16_t value, boost::uint16_t index, diff --git a/host/include/uhd/transport/usb_zero_copy.hpp b/host/include/uhd/transport/usb_zero_copy.hpp index 75232c22a..61bf380ba 100644 --- a/host/include/uhd/transport/usb_zero_copy.hpp +++ b/host/include/uhd/transport/usb_zero_copy.hpp @@ -45,16 +45,22 @@ public: * The underlying implementation may be platform specific. * * \param handle a device handle that uniquely identifying the device - * \param rx_endpoint an integer specifiying an IN endpoint number - * \param tx_endpoint an integer specifiying an OUT endpoint number - * \param buff_size total number of bytes of buffer space to allocate - * \param block_size number of bytes allocated for each I/O transaction + * \param recv_endpoint an integer specifiying an IN endpoint number + * \param send_endpoint an integer specifiying an OUT endpoint number + * \param recv_xfer_size the number of bytes for each receive transfer + * \param recv_num_xfers the number of simultaneous receive transfers + * \param send_xfer_size the number of bytes for each send transfer + * \param send_num_xfers the number of simultaneous send transfers */ - static sptr make(usb_device_handle::sptr handle, - unsigned int rx_endpoint, - unsigned int tx_endpoint, - size_t buff_size = 0, - size_t block_size = 0); + static sptr make( + usb_device_handle::sptr handle, + unsigned int recv_endpoint, + unsigned int send_endpoint, + size_t recv_xfer_size = 0, + size_t recv_num_xfers = 0, + size_t send_xfer_size = 0, + size_t send_num_xfers = 0 + ); }; }} //namespace diff --git a/host/include/uhd/usrp/dboard_iface.hpp b/host/include/uhd/usrp/dboard_iface.hpp index c7db244f2..c430ecd3f 100644 --- a/host/include/uhd/usrp/dboard_iface.hpp +++ b/host/include/uhd/usrp/dboard_iface.hpp @@ -242,6 +242,15 @@ public: * \param enb true for enabled */ virtual void set_clock_enabled(unit_t unit, bool enb) = 0; + + /*! + * Get the rate of the codec. + * For rx, this is the rate the ADC feeds the DSP. + * For tx, this is the rate the DSP feeds the DAC. + * \param unit which unit rx or tx + * \return the codec rate in Hz + */ + virtual double get_codec_rate(unit_t unit) = 0; }; }} //namespace diff --git a/host/lib/transport/libusb1_control.cpp b/host/lib/transport/libusb1_control.cpp index c989a788c..f903907d0 100644 --- a/host/lib/transport/libusb1_control.cpp +++ b/host/lib/transport/libusb1_control.cpp @@ -33,7 +33,7 @@ public: _handle->claim_interface(0 /* control interface */); } - size_t submit(boost::uint8_t request_type, + ssize_t submit(boost::uint8_t request_type, boost::uint8_t request, boost::uint16_t value, boost::uint16_t index, diff --git a/host/lib/transport/libusb1_zero_copy.cpp b/host/lib/transport/libusb1_zero_copy.cpp index b089d11e0..f2dcff6b5 100644 --- a/host/lib/transport/libusb1_zero_copy.cpp +++ b/host/lib/transport/libusb1_zero_copy.cpp @@ -30,6 +30,9 @@ using namespace uhd::transport; const int libusb_timeout = 0; +static const size_t DEFAULT_NUM_XFERS = 16; //num xfers +static const size_t DEFAULT_XFER_SIZE = 32*512; //bytes + /*********************************************************************** * Helper functions ***********************************************************************/ @@ -56,7 +59,7 @@ void pp_transfer(libusb_transfer *lut) * create a bidirectional interface. It is a zero copy implementation * with respect to libusb, however, each send and recv requires a copy * operation from kernel to userspace; this is due to the usbfs - * interface provided by the kernel. + * interface provided by the kernel. **********************************************************************/ class usb_endpoint { public: @@ -107,7 +110,7 @@ private: //! a list of shared arrays for the transfer buffers std::vector<boost::shared_array<boost::uint8_t> > _buffers; - // Calls for processing asynchronous I/O + // Calls for processing asynchronous I/O libusb_transfer *allocate_transfer(int buff_len); void print_transfer_status(libusb_transfer *lut); }; @@ -142,7 +145,7 @@ void usb_endpoint::callback_handle_transfer(libusb_transfer *lut){ * Constructor * Allocate libusb transfers and mark as free. For IN endpoints, * submit the transfers so that they're ready to return when - * data is available. + * data is available. */ usb_endpoint::usb_endpoint( libusb::device_handle::sptr handle, @@ -194,7 +197,7 @@ usb_endpoint::~usb_endpoint(void){ /* - * Allocate a libusb transfer + * Allocate a libusb transfer * The allocated transfer - and buffer it contains - is repeatedly * submitted, reaped, and reused and should not be freed until shutdown. * \param buff_len size of the individual buffer held by each transfer @@ -225,7 +228,7 @@ libusb_transfer *usb_endpoint::allocate_transfer(int buff_len){ * Asynchonous transfer submission * Submit a libusb transfer to libusb add pending status * \param lut pointer to libusb_transfer - * \return true on success or false on error + * \return true on success or false on error */ void usb_endpoint::submit(libusb_transfer *lut){ UHD_ASSERT_THROW(libusb_submit_transfer(lut) == 0); @@ -281,14 +284,14 @@ libusb_transfer *usb_endpoint::get_lut_with_wait(size_t timeout_ms){ } /*********************************************************************** - * Managed buffers + * Managed buffers **********************************************************************/ /* * Libusb managed receive buffer * Construct a recv buffer from a libusb transfer. The memory held by * the libusb transfer is exposed through the managed buffer interface. * Upon destruction, the transfer and buffer are resubmitted to the - * endpoint for further use. + * endpoint for further use. */ class libusb_managed_recv_buffer_impl : public managed_recv_buffer { public: @@ -307,7 +310,7 @@ public: private: const boost::asio::const_buffer &get() const { - return _buff; + return _buff; } libusb_transfer *_lut; @@ -327,9 +330,8 @@ private: class libusb_managed_send_buffer_impl : public managed_send_buffer { public: libusb_managed_send_buffer_impl(libusb_transfer *lut, - usb_endpoint::sptr endpoint, - size_t buff_size) - : _buff(lut->buffer, buff_size), _committed(false) + usb_endpoint::sptr endpoint) + : _buff(lut->buffer, lut->length), _committed(false) { _lut = lut; _endpoint = endpoint; @@ -349,7 +351,7 @@ public: std::cerr << "UHD: send buffer already committed" << std::endl; return 0; } - + UHD_ASSERT_THROW(num_bytes <= boost::asio::buffer_size(_buff)); _lut->length = num_bytes; @@ -369,7 +371,7 @@ public: private: const boost::asio::mutable_buffer &get() const { - return _buff; + return _buff; } libusb_transfer *_lut; @@ -385,61 +387,71 @@ private: class libusb_zero_copy_impl : public usb_zero_copy { private: - usb_endpoint::sptr _rx_ep, _tx_ep; - libusb::device_handle::sptr _handle; - - size_t _recv_buff_size; - size_t _send_buff_size; - size_t _num_frames; + size_t _recv_num_frames, _send_num_frames; + usb_endpoint::sptr _recv_ep, _send_ep; public: typedef boost::shared_ptr<libusb_zero_copy_impl> sptr; - libusb_zero_copy_impl(libusb::device_handle::sptr handle, - unsigned int rx_endpoint, - unsigned int tx_endpoint, - size_t recv_buff_size, - size_t send_buff_size); + libusb_zero_copy_impl( + libusb::device_handle::sptr handle, + unsigned int recv_endpoint, unsigned int send_endpoint, + size_t recv_xfer_size, size_t recv_num_xfers, + size_t send_xfer_size, size_t send_num_xfers + ); managed_recv_buffer::sptr get_recv_buff(void); managed_send_buffer::sptr get_send_buff(void); - size_t get_num_recv_frames(void) const { return _num_frames; } - size_t get_num_send_frames(void) const { return _num_frames; } + size_t get_num_recv_frames(void) const { return _recv_num_frames; } + size_t get_num_send_frames(void) const { return _send_num_frames; } }; /* * Constructor * Initializes libusb, opens devices, and sets up interfaces for I/O. - * Finally, creates endpoints for asynchronous I/O. + * Finally, creates endpoints for asynchronous I/O. */ -libusb_zero_copy_impl::libusb_zero_copy_impl(libusb::device_handle::sptr handle, - unsigned int rx_endpoint, - unsigned int tx_endpoint, - size_t buff_size, - size_t block_size) - : _handle(handle), - _recv_buff_size(block_size), _send_buff_size(block_size), - _num_frames(buff_size / block_size) -{ - _handle->claim_interface(2 /*in interface*/); +libusb_zero_copy_impl::libusb_zero_copy_impl( + libusb::device_handle::sptr handle, + unsigned int recv_endpoint, unsigned int send_endpoint, + size_t recv_xfer_size, size_t recv_num_xfers, + size_t send_xfer_size, size_t send_num_xfers +){ + _handle = handle; + + //if the sizes are left at 0 (automatic) -> use the defaults + if (recv_xfer_size == 0) recv_xfer_size = DEFAULT_XFER_SIZE; + if (recv_num_xfers == 0) recv_num_xfers = DEFAULT_NUM_XFERS; + if (send_xfer_size == 0) send_xfer_size = DEFAULT_XFER_SIZE; + if (send_num_xfers == 0) send_num_xfers = DEFAULT_NUM_XFERS; + + //sanity check the transfer sizes + UHD_ASSERT_THROW(recv_xfer_size % 512 == 0); + UHD_ASSERT_THROW(send_xfer_size % 512 == 0); + + //store the num xfers for the num frames count + _recv_num_frames = recv_num_xfers; + _send_num_frames = send_num_xfers; + + _handle->claim_interface(2 /*in interface*/); _handle->claim_interface(1 /*out interface*/); - _rx_ep = usb_endpoint::sptr(new usb_endpoint( + _recv_ep = usb_endpoint::sptr(new usb_endpoint( _handle, // libusb device_handle - rx_endpoint, // USB endpoint number + recv_endpoint, // USB endpoint number true, // IN endpoint - _recv_buff_size, // buffer size per transfer - _num_frames // number of libusb transfers + recv_xfer_size, // buffer size per transfer + recv_num_xfers // number of libusb transfers )); - _tx_ep = usb_endpoint::sptr(new usb_endpoint( + _send_ep = usb_endpoint::sptr(new usb_endpoint( _handle, // libusb device_handle - tx_endpoint, // USB endpoint number + send_endpoint, // USB endpoint number false, // OUT endpoint - _send_buff_size, // buffer size per transfer - _num_frames // number of libusb transfers + send_xfer_size, // buffer size per transfer + send_num_xfers // number of libusb transfers )); } @@ -447,17 +459,17 @@ libusb_zero_copy_impl::libusb_zero_copy_impl(libusb::device_handle::sptr handle, * Construct a managed receive buffer from a completed libusb transfer * (happy with buffer full of data) obtained from the receive endpoint. * Return empty pointer if no transfer is available (timeout or error). - * \return pointer to a managed receive buffer + * \return pointer to a managed receive buffer */ managed_recv_buffer::sptr libusb_zero_copy_impl::get_recv_buff(void){ - libusb_transfer *lut = _rx_ep->get_lut_with_wait(/* TODO timeout API */); + libusb_transfer *lut = _recv_ep->get_lut_with_wait(/* TODO timeout API */); if (lut == NULL) { return managed_recv_buffer::sptr(); } else { return managed_recv_buffer::sptr( new libusb_managed_recv_buffer_impl(lut, - _rx_ep)); + _recv_ep)); } } @@ -466,38 +478,36 @@ managed_recv_buffer::sptr libusb_zero_copy_impl::get_recv_buff(void){ * Construct a managed send buffer from a free libusb transfer (with * empty buffer). Return empty pointer of no transfer is available * (timeout or error). - * \return pointer to a managed send buffer + * \return pointer to a managed send buffer */ managed_send_buffer::sptr libusb_zero_copy_impl::get_send_buff(void){ - libusb_transfer *lut = _tx_ep->get_lut_with_wait(/* TODO timeout API */); + libusb_transfer *lut = _send_ep->get_lut_with_wait(/* TODO timeout API */); if (lut == NULL) { return managed_send_buffer::sptr(); } else { return managed_send_buffer::sptr( new libusb_managed_send_buffer_impl(lut, - _tx_ep, - _send_buff_size)); + _send_ep)); } } - /*********************************************************************** * USB zero_copy make functions **********************************************************************/ -usb_zero_copy::sptr usb_zero_copy::make(usb_device_handle::sptr handle, - unsigned int rx_endpoint, - unsigned int tx_endpoint, - size_t buff_size, - size_t block_size) - -{ +usb_zero_copy::sptr usb_zero_copy::make( + usb_device_handle::sptr handle, + unsigned int recv_endpoint, unsigned int send_endpoint, + size_t recv_xfer_size, size_t recv_num_xfers, + size_t send_xfer_size, size_t send_num_xfers +){ libusb::device_handle::sptr dev_handle(libusb::device_handle::get_cached_handle( boost::static_pointer_cast<libusb::special_handle>(handle)->get_device() )); - return sptr(new libusb_zero_copy_impl(dev_handle, - rx_endpoint, - tx_endpoint, - buff_size, - block_size)); + return sptr(new libusb_zero_copy_impl( + dev_handle, + recv_endpoint, send_endpoint, + recv_xfer_size, recv_num_xfers, + send_xfer_size, send_num_xfers + )); } diff --git a/host/lib/usrp/usrp1/dboard_iface.cpp b/host/lib/usrp/usrp1/dboard_iface.cpp index 4791b55ce..4f0549a37 100644 --- a/host/lib/usrp/usrp1/dboard_iface.cpp +++ b/host/lib/usrp/usrp1/dboard_iface.cpp @@ -93,6 +93,7 @@ public: std::vector<double> get_clock_rates(unit_t); double get_clock_rate(unit_t); void set_clock_enabled(unit_t, bool); + double get_codec_rate(unit_t); private: usrp1_iface::sptr _iface; @@ -170,6 +171,10 @@ void usrp1_dboard_iface::set_clock_enabled(unit_t, bool) //TODO we can only enable for special case anyway... } +double usrp1_dboard_iface::get_codec_rate(unit_t){ + return _clock->get_master_clock_freq(); +} + /*********************************************************************** * GPIO **********************************************************************/ diff --git a/host/lib/usrp/usrp1/usrp1_ctrl.cpp b/host/lib/usrp/usrp1/usrp1_ctrl.cpp index 76e8ce368..5043aed7d 100644 --- a/host/lib/usrp/usrp1/usrp1_ctrl.cpp +++ b/host/lib/usrp/usrp1/usrp1_ctrl.cpp @@ -180,7 +180,7 @@ public: unsigned char reset_n = 0; //hit the reset line - if (load_img_msg) std::cout << "Loading firmware image " << filestring << "..." << std::flush; + if (load_img_msg) std::cout << "Loading firmware image: " << filestring << "..." << std::flush; usrp_control_write(FX2_FIRMWARE_LOAD, 0xe600, 0, &reset_y, 1); @@ -209,9 +209,9 @@ public: } //type 0x01 is end else if (type == 0x01) { + usrp_set_firmware_hash(hash); //set hash before reset usrp_control_write(FX2_FIRMWARE_LOAD, 0xe600, 0, &reset_n, 1); - usrp_set_firmware_hash(hash); file.close(); //wait for things to settle @@ -267,11 +267,12 @@ public: return -1; } - ssize_t n; - while ((n = file.readsome((char *)buf, sizeof(buf))) > 0) { + while (not file.eof()) { + file.read((char *)buf, sizeof(buf)); + size_t n = file.gcount(); ret = usrp_control_write(VRQ_FPGA_LOAD, 0, FL_XFER, buf, n); - if (ret != n) { + if (ret < 0 or size_t(ret) != n) { std::cerr << "fpga load error " << ret << std::endl; file.close(); return -1; diff --git a/host/lib/usrp/usrp1/usrp1_impl.cpp b/host/lib/usrp/usrp1/usrp1_impl.cpp index 80ea49e9d..793e3027d 100644 --- a/host/lib/usrp/usrp1/usrp1_impl.cpp +++ b/host/lib/usrp/usrp1/usrp1_impl.cpp @@ -30,6 +30,7 @@ #include <boost/assign/list_of.hpp> #include <boost/filesystem.hpp> #include <boost/thread/thread.hpp> +#include <boost/lexical_cast.hpp> #include <iostream> using namespace uhd; @@ -74,14 +75,14 @@ static device_addrs_t usrp1_find(const device_addr_t &hint) boost::uint16_t vid = hint.has_key("uninit") ? FX2_VENDOR_ID : USRP1_VENDOR_ID; boost::uint16_t pid = hint.has_key("uninit") ? FX2_PRODUCT_ID : USRP1_PRODUCT_ID; - //see what we got on the USB bus - std::vector<usb_device_handle::sptr> device_list = - usb_device_handle::get_device_list(vid, pid); - - if(device_list.size() == 0) return usrp1_addrs; //return nothing if no USRPs found + // Important note: + // The get device list calls are nested inside the for loop. + // This allows the usb guts to decontruct when not in use, + // so that re-enumeration after fw load can occur successfully. + // This requirement is a courtesy of libusb1.0 on windows. //find the usrps and load firmware - BOOST_FOREACH(usb_device_handle::sptr handle, device_list) { + BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) { usb_control::sptr ctrl_transport = usb_control::make(handle); usrp_ctrl::sptr usrp_ctrl = usrp_ctrl::make(ctrl_transport); usrp_ctrl->usrp_load_firmware(usrp1_fw_image); @@ -90,9 +91,8 @@ static device_addrs_t usrp1_find(const device_addr_t &hint) //get descriptors again with serial number, but using the initialized VID/PID now since we have firmware vid = USRP1_VENDOR_ID; pid = USRP1_PRODUCT_ID; - device_list = usb_device_handle::get_device_list(vid, pid); - BOOST_FOREACH(usb_device_handle::sptr handle, device_list) { + BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) { device_addr_t new_addr; new_addr["type"] = "usrp1"; new_addr["serial"] = handle->get_serial(); @@ -108,6 +108,15 @@ static device_addrs_t usrp1_find(const device_addr_t &hint) /*********************************************************************** * Make **********************************************************************/ +template<typename output_type> static output_type cast_from_dev_addr( + const device_addr_t &device_addr, + const std::string &key, + output_type def_val +){ + return (device_addr.has_key(key))? + boost::lexical_cast<output_type>(device_addr[key]) : def_val; +} + static device::sptr usrp1_make(const device_addr_t &device_addr) { //extract the FPGA path for the USRP1 @@ -131,11 +140,15 @@ static device::sptr usrp1_make(const device_addr_t &device_addr) usrp_ctrl = usrp_ctrl::make(ctrl_transport); usrp_ctrl->usrp_load_fpga(usrp1_fpga_image); - data_transport = usb_zero_copy::make(handle, // identifier - 6, // IN endpoint - 2, // OUT endpoint - 2 * (1 << 20), // buffer size - 16384); // transfer size + data_transport = usb_zero_copy::make( + handle, // identifier + 6, // IN endpoint + 2, // OUT endpoint + size_t(cast_from_dev_addr<double>(device_addr, "recv_xfer_size", 0)), + size_t(cast_from_dev_addr<double>(device_addr, "recv_num_xfers", 0)), + size_t(cast_from_dev_addr<double>(device_addr, "send_xfer_size", 0)), + size_t(cast_from_dev_addr<double>(device_addr, "send_num_xfers", 0)) + ); break; } } @@ -174,7 +187,7 @@ usrp1_impl::usrp1_impl(uhd::transport::usb_zero_copy::sptr data_transport, //initialize the mboard mboard_init(); - //initialize the dboards + //initialize the dboards dboard_init(); //initialize the dsps diff --git a/host/lib/usrp/usrp2/dboard_iface.cpp b/host/lib/usrp/usrp2/dboard_iface.cpp index f6d2b718a..fdfbf0d17 100644 --- a/host/lib/usrp/usrp2/dboard_iface.cpp +++ b/host/lib/usrp/usrp2/dboard_iface.cpp @@ -61,6 +61,7 @@ public: double get_clock_rate(unit_t); std::vector<double> get_clock_rates(unit_t); void set_clock_enabled(unit_t, bool); + double get_codec_rate(unit_t); void write_spi( unit_t unit, @@ -158,6 +159,9 @@ void usrp2_dboard_iface::set_clock_enabled(unit_t unit, bool enb){ } } +double usrp2_dboard_iface::get_codec_rate(unit_t){ + return _clock_ctrl->get_master_clock_rate(); +} /*********************************************************************** * GPIO **********************************************************************/ |