summaryrefslogtreecommitdiffstats
path: root/host
diff options
context:
space:
mode:
Diffstat (limited to 'host')
-rw-r--r--host/docs/transport.rst11
-rw-r--r--host/docs/usrp2.rst15
-rw-r--r--host/examples/test_async_messages.cpp104
-rw-r--r--host/include/uhd/transport/udp_simple.hpp4
-rw-r--r--host/include/uhd/types/metadata.hpp4
-rw-r--r--host/lib/transport/udp_simple.cpp44
-rw-r--r--host/lib/transport/udp_zero_copy_asio.cpp31
-rw-r--r--host/lib/transport/vrt_packet_handler.hpp16
-rw-r--r--host/lib/usrp/dboard/db_basic_and_lf.cpp5
-rw-r--r--host/lib/usrp/dboard/db_dbsrx.cpp3
-rw-r--r--host/lib/usrp/usrp2/fw_common.h4
-rw-r--r--host/lib/usrp/usrp2/io_impl.cpp169
-rw-r--r--host/lib/usrp/usrp2/mboard_impl.cpp40
-rw-r--r--host/lib/usrp/usrp2/usrp2_iface.cpp14
-rw-r--r--host/lib/usrp/usrp2/usrp2_impl.cpp18
-rw-r--r--host/lib/usrp/usrp2/usrp2_impl.hpp14
-rw-r--r--host/lib/usrp/usrp2/usrp2_regs.hpp5
17 files changed, 357 insertions, 144 deletions
diff --git a/host/docs/transport.rst b/host/docs/transport.rst
index 432db4bb5..2f730f8e4 100644
--- a/host/docs/transport.rst
+++ b/host/docs/transport.rst
@@ -40,6 +40,17 @@ The following parameters can be used to alter the transport's default behavior:
as the asynchronous send implementation is currently disabled.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Flow control parameters
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+The host-based flow control expects periodic update packets from the device.
+These update packets inform the host of the last packet consumed by the device,
+which allows the host to determine throttling conditions for the transmission of packets.
+The following mechanisms affect the transmission of periodic update packets:
+
+* **ups_per_fifo:** The number of update packets for each FIFO's worth of bytes sent into the device
+* **ups_per_sec:** The number of update packets per second
+
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Resize socket buffers
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
It may be useful increase the size of the socket buffers to
diff --git a/host/docs/usrp2.rst b/host/docs/usrp2.rst
index d07175ce4..dbb11676b 100644
--- a/host/docs/usrp2.rst
+++ b/host/docs/usrp2.rst
@@ -48,12 +48,10 @@ Use the card burner tool (windows)
------------------------------------------------------------------------
Setup networking
------------------------------------------------------------------------
-The USRP2 only supports gigabit ethernet, and
-will not work with a 10/100 Mbps interface.
-Because the USRP2 uses gigabit ethernet pause frames for flow control,
-you cannot use multiple USRP2s with a switch or a hub.
-It is recommended that each USRP2 be plugged directly into its own
-dedicated gigabit ethernet interface on the host computer.
+The USRP2 only supports gigabit ethernet,
+and will not work with a 10/100 Mbps interface.
+However, a 10/100 Mbps interface can be connected indirectly
+to a USRP2 through a gigabit ethernet switch.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Setup the host interface
@@ -72,8 +70,9 @@ It is recommended that you change or disable your firewall settings.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Multiple device configuration
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-As described above, you will need one ethernet interface per USRP2.
-Each ethernet interface should have its own subnet,
+For maximum throughput, one ethernet interface per USRP2 is recommended,
+although multiple devices may be connected via a gigabit ethernet switch.
+In any case, each ethernet interface should have its own subnet,
and the corresponding USRP2 device should be assigned an address in that subnet.
Example:
diff --git a/host/examples/test_async_messages.cpp b/host/examples/test_async_messages.cpp
index e4a996ef5..b1d9d56d4 100644
--- a/host/examples/test_async_messages.cpp
+++ b/host/examples/test_async_messages.cpp
@@ -19,21 +19,25 @@
#include <uhd/utils/safe_main.hpp>
#include <uhd/utils/static.hpp>
#include <uhd/usrp/single_usrp.hpp>
+#include <boost/assign/list_of.hpp>
#include <boost/program_options.hpp>
+#include <boost/foreach.hpp>
+#include <boost/bind.hpp>
#include <boost/format.hpp>
+#include <cstdlib>
#include <complex>
#include <iostream>
namespace po = boost::program_options;
/*!
- * Test that no messages are received:
+ * Test the burst ack message:
* Send a burst of many samples that will fragment internally.
- * We expect to not get any async messages.
+ * We expect to get an burst ack async message.
*/
-void test_no_async_message(uhd::usrp::single_usrp::sptr sdev){
+bool test_burst_ack_message(uhd::usrp::single_usrp::sptr sdev){
uhd::device::sptr dev = sdev->get_device();
- std::cout << "Test no async message... " << std::flush;
+ std::cout << "Test burst ack message... " << std::flush;
uhd::tx_metadata_t md;
md.start_of_burst = true;
@@ -50,19 +54,28 @@ void test_no_async_message(uhd::usrp::single_usrp::sptr sdev){
);
uhd::async_metadata_t async_md;
- if (dev->recv_async_msg(async_md)){
+ if (not dev->recv_async_msg(async_md)){
std::cout << boost::format(
"failed:\n"
- " Got unexpected event code 0x%x.\n"
- ) % async_md.event_code << std::endl;
- //clear the async messages
- while (dev->recv_async_msg(async_md, 0)){};
+ " Async message recv timed out.\n"
+ ) << std::endl;
+ return false;
}
- else{
+
+ switch(async_md.event_code){
+ case uhd::async_metadata_t::EVENT_CODE_BURST_ACK:
std::cout << boost::format(
"success:\n"
- " Did not get an async message.\n"
+ " Got event code burst ack message.\n"
) << std::endl;
+ return true;
+
+ default:
+ std::cout << boost::format(
+ "failed:\n"
+ " Got unexpected event code 0x%x.\n"
+ ) % async_md.event_code << std::endl;
+ return false;
}
}
@@ -71,7 +84,7 @@ void test_no_async_message(uhd::usrp::single_usrp::sptr sdev){
* Send a start of burst packet with no following end of burst.
* We expect to get an underflow(within a burst) async message.
*/
-void test_underflow_message(uhd::usrp::single_usrp::sptr sdev){
+bool test_underflow_message(uhd::usrp::single_usrp::sptr sdev){
uhd::device::sptr dev = sdev->get_device();
std::cout << "Test underflow message... " << std::flush;
@@ -80,18 +93,19 @@ void test_underflow_message(uhd::usrp::single_usrp::sptr sdev){
md.end_of_burst = false;
md.has_time_spec = false;
- dev->send(NULL, 0, md,
+ dev->send(
+ NULL, 0, md,
uhd::io_type_t::COMPLEX_FLOAT32,
uhd::device::SEND_MODE_FULL_BUFF
);
uhd::async_metadata_t async_md;
- if (not dev->recv_async_msg(async_md)){
+ if (not dev->recv_async_msg(async_md, 1)){
std::cout << boost::format(
"failed:\n"
" Async message recv timed out.\n"
) << std::endl;
- return;
+ return false;
}
switch(async_md.event_code){
@@ -100,13 +114,14 @@ void test_underflow_message(uhd::usrp::single_usrp::sptr sdev){
"success:\n"
" Got event code underflow message.\n"
) << std::endl;
- break;
+ return true;
default:
std::cout << boost::format(
"failed:\n"
" Got unexpected event code 0x%x.\n"
) % async_md.event_code << std::endl;
+ return false;
}
}
@@ -115,7 +130,7 @@ void test_underflow_message(uhd::usrp::single_usrp::sptr sdev){
* Send a burst packet that occurs at a time in the past.
* We expect to get a time error async message.
*/
-void test_time_error_message(uhd::usrp::single_usrp::sptr sdev){
+bool test_time_error_message(uhd::usrp::single_usrp::sptr sdev){
uhd::device::sptr dev = sdev->get_device();
std::cout << "Test time error message... " << std::flush;
@@ -127,7 +142,8 @@ void test_time_error_message(uhd::usrp::single_usrp::sptr sdev){
sdev->set_time_now(uhd::time_spec_t(200.0)); //time at 200s
- dev->send(NULL, 0, md,
+ dev->send(
+ NULL, 0, md,
uhd::io_type_t::COMPLEX_FLOAT32,
uhd::device::SEND_MODE_FULL_BUFF
);
@@ -138,7 +154,7 @@ void test_time_error_message(uhd::usrp::single_usrp::sptr sdev){
"failed:\n"
" Async message recv timed out.\n"
) << std::endl;
- return;
+ return false;
}
switch(async_md.event_code){
@@ -147,29 +163,38 @@ void test_time_error_message(uhd::usrp::single_usrp::sptr sdev){
"success:\n"
" Got event code time error message.\n"
) << std::endl;
- break;
+ return true;
default:
std::cout << boost::format(
"failed:\n"
" Got unexpected event code 0x%x.\n"
) % async_md.event_code << std::endl;
+ return false;
}
}
+void flush_async_md(uhd::usrp::single_usrp::sptr sdev){
+ uhd::device::sptr dev = sdev->get_device();
+ uhd::async_metadata_t async_md;
+ while (dev->recv_async_msg(async_md, 1.0)){}
+}
+
int UHD_SAFE_MAIN(int argc, char *argv[]){
uhd::set_thread_priority_safe();
//variables to be set by po
std::string args;
double rate;
+ size_t ntests;
//setup the program options
po::options_description desc("Allowed options");
desc.add_options()
("help", "help message")
- ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args")
- ("rate", po::value<double>(&rate)->default_value(1.5e6), "rate of outgoing samples")
+ ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args")
+ ("rate", po::value<double>(&rate)->default_value(1.5e6), "rate of outgoing samples")
+ ("ntests", po::value<size_t>(&ntests)->default_value(10), "number of tests to run")
;
po::variables_map vm;
po::store(po::parse_command_line(argc, argv, desc), vm);
@@ -195,9 +220,38 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
//------------------------------------------------------------------
// begin asyc messages test
//------------------------------------------------------------------
- test_no_async_message(sdev);
- test_underflow_message(sdev);
- test_time_error_message(sdev);
+ static const uhd::dict<std::string, boost::function<bool(uhd::usrp::single_usrp::sptr)> >
+ tests = boost::assign::map_list_of
+ ("Test Burst ACK ", &test_burst_ack_message)
+ ("Test Underflow ", &test_underflow_message)
+ ("Test Time Error", &test_time_error_message)
+ ;
+
+ //init result counts
+ uhd::dict<std::string, size_t> failures, successes;
+ BOOST_FOREACH(const std::string &key, tests.keys()){
+ failures[key] = 0;
+ successes[key] = 0;
+ }
+
+ //run the tests, pick at random
+ for (size_t n = 0; n < ntests; n++){
+ std::string key = tests.keys()[std::rand() % tests.size()];
+ bool pass = tests[key](sdev);
+ flush_async_md(sdev);
+
+ //store result
+ if (pass) successes[key]++;
+ else failures[key]++;
+ }
+
+ //print the result summary
+ std::cout << std::endl << "Summary:" << std::endl << std::endl;
+ BOOST_FOREACH(const std::string &key, tests.keys()){
+ std::cout << boost::format(
+ "%s -> %3d successes, %3d failures"
+ ) % key % successes[key] % failures[key] << std::endl;
+ }
//finished
std::cout << std::endl << "Done!" << std::endl << std::endl;
diff --git a/host/include/uhd/transport/udp_simple.hpp b/host/include/uhd/transport/udp_simple.hpp
index c84393ecf..83f895ba9 100644
--- a/host/include/uhd/transport/udp_simple.hpp
+++ b/host/include/uhd/transport/udp_simple.hpp
@@ -73,10 +73,10 @@ public:
* Receive into the provided buffer.
* Blocks until data is received or a timeout occurs.
* \param buff a mutable buffer to receive into
- * \param timeout_ms the timeout in milliseconds
+ * \param timeout the timeout in seconds
* \return the number of bytes received or zero on timeout
*/
- virtual size_t recv(const boost::asio::mutable_buffer &buff, size_t timeout_ms) = 0;
+ virtual size_t recv(const boost::asio::mutable_buffer &buff, double timeout = 0.1) = 0;
};
}} //namespace
diff --git a/host/include/uhd/types/metadata.hpp b/host/include/uhd/types/metadata.hpp
index 3f250d13e..f4e084430 100644
--- a/host/include/uhd/types/metadata.hpp
+++ b/host/include/uhd/types/metadata.hpp
@@ -132,8 +132,8 @@ namespace uhd{
* The type of event for a receive async message call.
*/
enum event_code_t {
- //! A packet was successfully transmitted.
- EVENT_CODE_SUCCESS = 0x1,
+ //! A burst was successfully transmitted.
+ EVENT_CODE_BURST_ACK = 0x1,
//! An internal send buffer has emptied.
EVENT_CODE_UNDERFLOW = 0x2,
//! Packet loss between host and device.
diff --git a/host/lib/transport/udp_simple.cpp b/host/lib/transport/udp_simple.cpp
index 89750f99d..5829b462b 100644
--- a/host/lib/transport/udp_simple.cpp
+++ b/host/lib/transport/udp_simple.cpp
@@ -27,23 +27,25 @@ using namespace uhd::transport;
* Helper Functions
**********************************************************************/
/*!
- * A receive timeout for a socket:
- *
- * It seems that asio cannot have timeouts with synchronous io.
- * However, we can implement a polling loop that will timeout.
- * This is okay bacause this is the slow-path implementation.
- *
+ * Wait for available data or timeout.
* \param socket the asio socket
- * \param timeout_ms the timeout in milliseconds
+ * \param timeout the timeout in seconds
+ * \return false for timeout, true for data
*/
-static void reasonable_recv_timeout(
- boost::asio::ip::udp::socket &socket, size_t timeout_ms
+static bool wait_available(
+ boost::asio::ip::udp::socket &socket, double timeout
){
- boost::asio::deadline_timer timer(socket.get_io_service());
- timer.expires_from_now(boost::posix_time::milliseconds(timeout_ms));
- while (not (socket.available() or timer.expires_from_now().is_negative())){
- boost::this_thread::sleep(boost::posix_time::milliseconds(1));
- }
+ //setup timeval for timeout
+ timeval tv;
+ tv.tv_sec = 0;
+ tv.tv_usec = long(timeout*1e6);
+
+ //setup rset for timeout
+ fd_set rset;
+ FD_ZERO(&rset);
+ FD_SET(socket.native(), &rset);
+
+ return ::select(socket.native()+1, &rset, NULL, NULL, &tv) > 0;
}
/***********************************************************************
@@ -57,7 +59,7 @@ public:
//send/recv
size_t send(const boost::asio::const_buffer &);
- size_t recv(const boost::asio::mutable_buffer &, size_t);
+ size_t recv(const boost::asio::mutable_buffer &, double);
private:
boost::asio::ip::udp::socket *_socket;
@@ -86,9 +88,8 @@ size_t udp_connected_impl::send(const boost::asio::const_buffer &buff){
return _socket->send(boost::asio::buffer(buff));
}
-size_t udp_connected_impl::recv(const boost::asio::mutable_buffer &buff, size_t timeout_ms){
- reasonable_recv_timeout(*_socket, timeout_ms);
- if (not _socket->available()) return 0;
+size_t udp_connected_impl::recv(const boost::asio::mutable_buffer &buff, double timeout){
+ if (not wait_available(*_socket, timeout)) return 0;
return _socket->receive(boost::asio::buffer(buff));
}
@@ -103,7 +104,7 @@ public:
//send/recv
size_t send(const boost::asio::const_buffer &);
- size_t recv(const boost::asio::mutable_buffer &, size_t);
+ size_t recv(const boost::asio::mutable_buffer &, double);
private:
boost::asio::ip::udp::socket *_socket;
@@ -137,9 +138,8 @@ size_t udp_broadcast_impl::send(const boost::asio::const_buffer &buff){
return _socket->send_to(boost::asio::buffer(buff), _receiver_endpoint);
}
-size_t udp_broadcast_impl::recv(const boost::asio::mutable_buffer &buff, size_t timeout_ms){
- reasonable_recv_timeout(*_socket, timeout_ms);
- if (not _socket->available()) return 0;
+size_t udp_broadcast_impl::recv(const boost::asio::mutable_buffer &buff, double timeout){
+ if (not wait_available(*_socket, timeout)) return 0;
boost::asio::ip::udp::endpoint sender_endpoint;
return _socket->receive_from(boost::asio::buffer(buff), sender_endpoint);
}
diff --git a/host/lib/transport/udp_zero_copy_asio.cpp b/host/lib/transport/udp_zero_copy_asio.cpp
index ed29864e9..c758fa894 100644
--- a/host/lib/transport/udp_zero_copy_asio.cpp
+++ b/host/lib/transport/udp_zero_copy_asio.cpp
@@ -59,16 +59,23 @@ static const size_t DEFAULT_NUM_RECV_FRAMES = 32;
#else
static const size_t DEFAULT_NUM_RECV_FRAMES = MIN_RECV_SOCK_BUFF_SIZE/udp_simple::mtu;
#endif
+
//The non-async send only ever requires a single frame
//because the buffer will be committed before a new get.
#ifdef USE_ASIO_ASYNC_SEND
static const size_t DEFAULT_NUM_SEND_FRAMES = 32;
#else
-static const size_t DEFAULT_NUM_SEND_FRAMES = MIN_SEND_SOCK_BUFF_SIZE/udp_simple::mtu;;
+static const size_t DEFAULT_NUM_SEND_FRAMES = MIN_SEND_SOCK_BUFF_SIZE/udp_simple::mtu;
#endif
-//a single concurrent thread for io_service seems to be the fastest
+//The number of service threads to spawn for async ASIO:
+//A single concurrent thread for io_service seems to be the fastest.
+//Threads are disabled when no async implementations are enabled.
+#if defined(USE_ASIO_ASYNC_RECV) || defined(USE_ASIO_ASYNC_SEND)
static const size_t CONCURRENCY_HINT = 1;
+#else
+static const size_t CONCURRENCY_HINT = 0;
+#endif
/***********************************************************************
* Zero Copy UDP implementation with ASIO:
@@ -86,11 +93,12 @@ public:
const std::string &port,
const device_addr_t &hints
):
- _io_service(hints.cast<size_t>("concurrency_hint", CONCURRENCY_HINT)),
_recv_frame_size(size_t(hints.cast<double>("recv_frame_size", udp_simple::mtu))),
_num_recv_frames(size_t(hints.cast<double>("num_recv_frames", DEFAULT_NUM_RECV_FRAMES))),
_send_frame_size(size_t(hints.cast<double>("send_frame_size", udp_simple::mtu))),
- _num_send_frames(size_t(hints.cast<double>("num_send_frames", DEFAULT_NUM_SEND_FRAMES)))
+ _num_send_frames(size_t(hints.cast<double>("num_send_frames", DEFAULT_NUM_SEND_FRAMES))),
+ _concurrency_hint(hints.cast<size_t>("concurrency_hint", CONCURRENCY_HINT)),
+ _io_service(_concurrency_hint)
{
//std::cout << boost::format("Creating udp transport for %s %s") % addr % port << std::endl;
@@ -129,7 +137,7 @@ public:
//spawn the service threads that will run the io service
_work = new asio::io_service::work(_io_service); //new work to delete later
- for (size_t i = 0; i < CONCURRENCY_HINT; i++) _thread_group.create_thread(
+ for (size_t i = 0; i < _concurrency_hint; i++) _thread_group.create_thread(
boost::bind(&udp_zero_copy_asio_impl::service, this)
);
}
@@ -292,12 +300,6 @@ public:
size_t get_send_frame_size(void) const {return _send_frame_size;}
private:
- //asio guts -> socket and service
- asio::ip::udp::socket *_socket;
- asio::io_service _io_service;
- asio::io_service::work *_work;
- int _sock_fd;
-
//memory management -> buffers and fifos
boost::thread_group _thread_group;
boost::shared_array<char> _send_buffer, _recv_buffer;
@@ -305,6 +307,13 @@ private:
pending_buffs_type::sptr _pending_recv_buffs, _pending_send_buffs;
const size_t _recv_frame_size, _num_recv_frames;
const size_t _send_frame_size, _num_send_frames;
+
+ //asio guts -> socket and service
+ size_t _concurrency_hint;
+ asio::io_service _io_service;
+ asio::ip::udp::socket *_socket;
+ asio::io_service::work *_work;
+ int _sock_fd;
};
/***********************************************************************
diff --git a/host/lib/transport/vrt_packet_handler.hpp b/host/lib/transport/vrt_packet_handler.hpp
index 939517411..278bcfeaa 100644
--- a/host/lib/transport/vrt_packet_handler.hpp
+++ b/host/lib/transport/vrt_packet_handler.hpp
@@ -318,7 +318,7 @@ template <typename T> UHD_INLINE T get_context_code(
){
//load the rest of the if_packet_info in here
if_packet_info.num_payload_words32 = (num_samps*chans_per_otw_buff*otw_type.get_sample_size())/sizeof(boost::uint32_t);
- if_packet_info.packet_count = state.next_packet_seq++;
+ if_packet_info.packet_count = state.next_packet_seq;
//get send buffers for each channel
managed_send_buffs_t send_buffs(buffs.size()/chans_per_otw_buff);
@@ -345,6 +345,7 @@ template <typename T> UHD_INLINE T get_context_code(
size_t num_bytes_total = (vrt_header_offset_words32+if_packet_info.num_packet_words32)*sizeof(boost::uint32_t);
send_buffs[i]->commit(num_bytes_total);
}
+ state.next_packet_seq++; //increment sequence after commits
return num_samps;
}
@@ -387,10 +388,19 @@ template <typename T> UHD_INLINE T get_context_code(
if_packet_info.sob = metadata.start_of_burst;
if_packet_info.eob = metadata.end_of_burst;
+ //TODO remove this code when sample counts of zero are supported by hardware
+ std::vector<const void *> buffs_(buffs);
+ size_t total_num_samps_(total_num_samps);
+ if (total_num_samps == 0){
+ static const boost::uint64_t zeros = 0; //max size of a host sample
+ buffs_ = std::vector<const void *>(buffs.size(), &zeros);
+ total_num_samps_ = 1;
+ }
+
return _send1(
state,
- buffs, 0,
- std::min(total_num_samps, max_samples_per_packet),
+ buffs_, 0,
+ std::min(total_num_samps_, max_samples_per_packet),
if_packet_info,
io_type, otw_type,
vrt_packer,
diff --git a/host/lib/usrp/dboard/db_basic_and_lf.cpp b/host/lib/usrp/dboard/db_basic_and_lf.cpp
index f03dd43d1..73f894374 100644
--- a/host/lib/usrp/dboard/db_basic_and_lf.cpp
+++ b/host/lib/usrp/dboard/db_basic_and_lf.cpp
@@ -106,6 +106,11 @@ UHD_STATIC_BLOCK(reg_basic_and_lf_dboards){
**********************************************************************/
basic_rx::basic_rx(ctor_args_t args, double max_freq) : rx_dboard_base(args){
_max_freq = max_freq;
+
+ //set GPIOs to output 0x0000 to decrease noise pickup
+ this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, 0x0000);
+ this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, 0xFFFF);
+ this->get_iface()->write_gpio(dboard_iface::UNIT_RX, 0x0000);
}
basic_rx::~basic_rx(void){
diff --git a/host/lib/usrp/dboard/db_dbsrx.cpp b/host/lib/usrp/dboard/db_dbsrx.cpp
index 85251bdf9..aa3eeb6b5 100644
--- a/host/lib/usrp/dboard/db_dbsrx.cpp
+++ b/host/lib/usrp/dboard/db_dbsrx.cpp
@@ -374,6 +374,9 @@ void dbsrx::set_lo_freq(double target_freq){
//update vco selection and check vtune
send_reg(0x2, 0x2);
read_reg(0x0, 0x0);
+
+ //allow for setup time before checking condition again
+ boost::this_thread::sleep(boost::posix_time::milliseconds(1));
}
if(dbsrx_debug) std::cerr << boost::format(
diff --git a/host/lib/usrp/usrp2/fw_common.h b/host/lib/usrp/usrp2/fw_common.h
index 4ff31ddfd..49508f46c 100644
--- a/host/lib/usrp/usrp2/fw_common.h
+++ b/host/lib/usrp/usrp2/fw_common.h
@@ -33,8 +33,8 @@ extern "C" {
#endif
//fpga and firmware compatibility numbers
-#define USRP2_FPGA_COMPAT_NUM 2
-#define USRP2_FW_COMPAT_NUM 6
+#define USRP2_FPGA_COMPAT_NUM 3
+#define USRP2_FW_COMPAT_NUM 7
//used to differentiate control packets over data port
#define USRP2_INVALID_VRT_HEADER 0
diff --git a/host/lib/usrp/usrp2/io_impl.cpp b/host/lib/usrp/usrp2/io_impl.cpp
index 83b70bddc..39e6c167f 100644
--- a/host/lib/usrp/usrp2/io_impl.cpp
+++ b/host/lib/usrp/usrp2/io_impl.cpp
@@ -18,11 +18,11 @@
#include "../../transport/vrt_packet_handler.hpp"
#include "usrp2_impl.hpp"
#include "usrp2_regs.hpp"
+#include <uhd/utils/byteswap.hpp>
#include <uhd/utils/thread_priority.hpp>
#include <uhd/transport/convert_types.hpp>
#include <uhd/transport/alignment_buffer.hpp>
#include <boost/format.hpp>
-#include <boost/asio.hpp> //htonl and ntohl
#include <boost/bind.hpp>
#include <boost/thread.hpp>
#include <iostream>
@@ -32,7 +32,73 @@ using namespace uhd::usrp;
using namespace uhd::transport;
namespace asio = boost::asio;
-static const int underflow_flags = async_metadata_t::EVENT_CODE_UNDERFLOW | async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET;
+/***********************************************************************
+ * constants
+ **********************************************************************/
+static const int underflow_flags = 0
+ | async_metadata_t::EVENT_CODE_UNDERFLOW
+ | async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET
+;
+
+static const size_t vrt_send_header_offset_words32 = 1;
+
+/***********************************************************************
+ * flow control monitor for a single tx channel
+ * - the pirate thread calls update
+ * - the get send buffer calls check
+ **********************************************************************/
+class flow_control_monitor{
+public:
+ typedef boost::uint32_t seq_type;
+ typedef boost::shared_ptr<flow_control_monitor> sptr;
+
+ /*!
+ * Make a new flow control monitor.
+ * \param max_seqs_out num seqs before throttling
+ */
+ flow_control_monitor(seq_type max_seqs_out){
+ _last_seq_out = 0;
+ _last_seq_ack = 0;
+ _max_seqs_out = max_seqs_out;
+ }
+
+ /*!
+ * Check the flow control condition.
+ * \param seq the sequence to go out
+ * \param timeout the timeout in seconds
+ * \return false on timeout
+ */
+ UHD_INLINE bool check_fc_condition(seq_type seq, double timeout){
+ boost::this_thread::disable_interruption di; //disable because the wait can throw
+ boost::unique_lock<boost::mutex> lock(_fc_mutex);
+ _last_seq_out = seq;
+ return _fc_cond.timed_wait(
+ lock,
+ boost::posix_time::microseconds(long(timeout*1e6)),
+ boost::bind(&flow_control_monitor::ready, this)
+ );
+ }
+
+ /*!
+ * Update the flow control condition.
+ * \param seq the last sequence number to be ACK'd
+ */
+ UHD_INLINE void update_fc_condition(seq_type seq){
+ boost::unique_lock<boost::mutex> lock(_fc_mutex);
+ _last_seq_ack = seq;
+ lock.unlock();
+ _fc_cond.notify_one();
+ }
+
+private:
+ bool ready(void){
+ return seq_type(_last_seq_out -_last_seq_ack) < _max_seqs_out;
+ }
+
+ boost::mutex _fc_mutex;
+ boost::condition _fc_cond;
+ seq_type _last_seq_out, _last_seq_ack, _max_seqs_out;
+};
/***********************************************************************
* io impl details (internal to this file)
@@ -44,12 +110,14 @@ static const int underflow_flags = async_metadata_t::EVENT_CODE_UNDERFLOW | asyn
struct usrp2_impl::io_impl{
typedef alignment_buffer<managed_recv_buffer::sptr, time_spec_t> alignment_buffer_type;
- io_impl(size_t num_frames, size_t width):
+ io_impl(size_t num_recv_frames, size_t send_frame_size, size_t width):
packet_handler_recv_state(width),
- recv_pirate_booty(alignment_buffer_type::make(num_frames-3, width)),
+ recv_pirate_booty(alignment_buffer_type::make(num_recv_frames-3, width)),
async_msg_fifo(bounded_buffer<async_metadata_t>::make(100/*messages deep*/))
{
- /* NOP */
+ for (size_t i = 0; i < width; i++) fc_mons.push_back(
+ flow_control_monitor::sptr(new flow_control_monitor(usrp2_impl::sram_bytes/send_frame_size))
+ );
}
~io_impl(void){
@@ -63,6 +131,29 @@ struct usrp2_impl::io_impl{
return recv_pirate_booty->pop_elems_with_timed_wait(buffs, timeout);
}
+ bool get_send_buffs(
+ const std::vector<zero_copy_if::sptr> &trans,
+ vrt_packet_handler::managed_send_buffs_t &buffs,
+ double timeout
+ ){
+ UHD_ASSERT_THROW(trans.size() == buffs.size());
+
+ //calculate the flow control word
+ const boost::uint32_t fc_word32 = packet_handler_send_state.next_packet_seq;
+
+ //grab a managed buffer for each index
+ for (size_t i = 0; i < buffs.size(); i++){
+ if (not fc_mons[i]->check_fc_condition(fc_word32, timeout)) return false;
+ buffs[i] = trans[i]->get_send_buff(timeout);
+ if (not buffs[i].get()) return false;
+ buffs[i]->cast<boost::uint32_t *>()[0] = uhd::htonx(fc_word32);
+ }
+ return true;
+ }
+
+ //flow control monitors
+ std::vector<flow_control_monitor::sptr> fc_mons;
+
//state management for the vrt packet handler code
vrt_packet_handler::recv_state packet_handler_recv_state;
vrt_packet_handler::send_state packet_handler_send_state;
@@ -112,8 +203,16 @@ void usrp2_impl::io_impl::recv_pirate_loop(
);
metadata.event_code = vrt_packet_handler::get_context_code<async_metadata_t::event_code_t>(vrt_hdr, if_packet_info);
+ //catch the flow control packets and react
+ if (metadata.event_code == 0){
+ boost::uint32_t fc_word32 = (vrt_hdr + if_packet_info.num_header_words32)[1];
+ this->fc_mons[index]->update_fc_condition(uhd::ntohx(fc_word32));
+ continue;
+ }
+
//print the famous U, and push the metadata into the message queue
if (metadata.event_code & underflow_flags) std::cerr << "U" << std::flush;
+ //else std::cout << "metadata.event_code " << metadata.event_code << std::endl;
async_msg_fifo->push_with_pop_on_full(metadata);
continue;
}
@@ -142,23 +241,39 @@ void usrp2_impl::io_impl::recv_pirate_loop(
/***********************************************************************
* Helper Functions
**********************************************************************/
+#include <uhd/usrp/mboard_props.hpp> //TODO remove when hack below is fixed
+
void usrp2_impl::io_init(void){
- //send a small data packet so the usrp2 knows the udp source port
- BOOST_FOREACH(zero_copy_if::sptr data_transport, _data_transports){
- managed_send_buffer::sptr send_buff = data_transport->get_send_buff();
- static const boost::uint32_t data = htonl(USRP2_INVALID_VRT_HEADER);
- std::memcpy(send_buff->cast<void*>(), &data, sizeof(data));
- send_buff->commit(sizeof(data));
- //drain the recv buffers (may have junk)
- while (data_transport->get_recv_buff().get()){};
- }
- //the number of recv frames is the number for the first transport
//the assumption is that all data transports should be identical
- size_t num_frames = _data_transports.front()->get_num_recv_frames();
+ const size_t num_recv_frames = _data_transports.front()->get_num_recv_frames();
+ const size_t send_frame_size = _data_transports.front()->get_send_frame_size();
//create new io impl
- _io_impl = UHD_PIMPL_MAKE(io_impl, (num_frames, _data_transports.size()));
+ _io_impl = UHD_PIMPL_MAKE(io_impl, (num_recv_frames, send_frame_size, _data_transports.size()));
+
+ //TODO temporary fix for weird power up state, remove when FPGA fixed
+ {
+ //send an initial packet to all transports
+ tx_metadata_t md; md.end_of_burst = true;
+ this->send(
+ std::vector<const void *>(_data_transports.size(), NULL), 0, md,
+ io_type_t::COMPLEX_FLOAT32, device::SEND_MODE_ONE_PACKET, 0
+ );
+
+ //issue a stream command to each motherboard
+ BOOST_FOREACH(usrp2_mboard_impl::sptr mboard, _mboards){
+ (*mboard)[MBOARD_PROP_STREAM_CMD] = stream_cmd_t(stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);
+ }
+
+ //wait
+ boost::this_thread::sleep(boost::posix_time::milliseconds(100));
+
+ //flush all transport receive queues (no timeout)
+ BOOST_FOREACH(zero_copy_if::sptr xport, _data_transports){
+ while(xport->get_recv_buff(0).get() != NULL){};
+ }
+ }
//create a new pirate thread for each zc if (yarr!!)
for (size_t i = 0; i < _data_transports.size(); i++){
@@ -183,23 +298,10 @@ bool usrp2_impl::recv_async_msg(
/***********************************************************************
* Send Data
**********************************************************************/
-static bool get_send_buffs(
- const std::vector<udp_zero_copy::sptr> &trans,
- vrt_packet_handler::managed_send_buffs_t &buffs,
- double timeout
-){
- UHD_ASSERT_THROW(trans.size() == buffs.size());
- bool good = true;
- for (size_t i = 0; i < buffs.size(); i++){
- buffs[i] = trans[i]->get_send_buff(timeout);
- good = good and (buffs[i].get() != NULL);
- }
- return good;
-}
-
size_t usrp2_impl::get_max_send_samps_per_packet(void) const{
static const size_t hdr_size = 0
+ vrt::max_if_hdr_words32*sizeof(boost::uint32_t)
+ + vrt_send_header_offset_words32*sizeof(boost::uint32_t)
- sizeof(vrt::if_packet_info_t().cid) //no class id ever used
;
const size_t bpp = _data_transports.front()->get_send_frame_size() - hdr_size;
@@ -218,8 +320,9 @@ size_t usrp2_impl::send(
io_type, _tx_otw_type, //input and output types to convert
_mboards.front()->get_master_clock_freq(), //master clock tick rate
uhd::transport::vrt::if_hdr_pack_be,
- boost::bind(&get_send_buffs, _data_transports, _1, timeout),
- get_max_send_samps_per_packet()
+ boost::bind(&usrp2_impl::io_impl::get_send_buffs, _io_impl.get(), _data_transports, _1, timeout),
+ get_max_send_samps_per_packet(),
+ vrt_send_header_offset_words32
);
}
diff --git a/host/lib/usrp/usrp2/mboard_impl.cpp b/host/lib/usrp/usrp2/mboard_impl.cpp
index df98ba275..bb9b6d1a9 100644
--- a/host/lib/usrp/usrp2/mboard_impl.cpp
+++ b/host/lib/usrp/usrp2/mboard_impl.cpp
@@ -21,6 +21,7 @@
#include <uhd/usrp/dsp_utils.hpp>
#include <uhd/usrp/mboard_props.hpp>
#include <uhd/utils/assert.hpp>
+#include <uhd/utils/byteswap.hpp>
#include <uhd/utils/algorithm.hpp>
#include <boost/bind.hpp>
#include <iostream>
@@ -34,12 +35,25 @@ using namespace uhd::usrp;
usrp2_mboard_impl::usrp2_mboard_impl(
size_t index,
transport::udp_simple::sptr ctrl_transport,
- size_t recv_frame_size
+ transport::zero_copy_if::sptr data_transport,
+ size_t recv_samps_per_packet,
+ const device_addr_t &flow_control_hints
):
_index(index),
- _recv_frame_size(recv_frame_size),
+ _recv_samps_per_packet(recv_samps_per_packet),
_iface(usrp2_iface::make(ctrl_transport))
{
+ //Send a small data packet so the usrp2 knows the udp source port.
+ //This setup must happen before further initialization occurs
+ //or the async update packets will cause ICMP destination unreachable.
+ transport::managed_send_buffer::sptr send_buff = data_transport->get_send_buff();
+ static const boost::uint32_t data[2] = {
+ uhd::htonx(boost::uint32_t(0 /* don't care seq num */)),
+ uhd::htonx(boost::uint32_t(USRP2_INVALID_VRT_HEADER))
+ };
+ std::memcpy(send_buff->cast<void*>(), &data, sizeof(data));
+ send_buff->commit(sizeof(data));
+
//contruct the interfaces to mboard perifs
_clock_ctrl = usrp2_clock_ctrl::make(_iface);
_codec_ctrl = usrp2_codec_ctrl::make(_iface);
@@ -59,13 +73,8 @@ usrp2_mboard_impl::usrp2_mboard_impl(
_allowed_decim_and_interp_rates.push_back(i);
}
- //Issue a stop streaming command (in case it was left running).
- //Since this command is issued before the networking is setup,
- //most if not all junk packets will never make it to the socket.
- this->issue_ddc_stream_cmd(stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);
-
//init the rx control registers
- _iface->poke32(U2_REG_RX_CTRL_NSAMPS_PER_PKT, _recv_frame_size);
+ _iface->poke32(U2_REG_RX_CTRL_NSAMPS_PER_PKT, _recv_samps_per_packet);
_iface->poke32(U2_REG_RX_CTRL_NCHANNELS, 1);
_iface->poke32(U2_REG_RX_CTRL_CLEAR_OVERRUN, 1); //reset
_iface->poke32(U2_REG_RX_CTRL_VRT_HEADER, 0
@@ -84,6 +93,16 @@ usrp2_mboard_impl::usrp2_mboard_impl(
_iface->poke32(U2_REG_TX_CTRL_REPORT_SID, 1); //sid 1 (different from rx)
_iface->poke32(U2_REG_TX_CTRL_POLICY, U2_FLAG_TX_CTRL_POLICY_NEXT_PACKET);
+ //setting the cycles per update
+ const double ups_per_sec = flow_control_hints.cast<double>("ups_per_sec", 100);
+ const size_t cycles_per_up = size_t(_clock_ctrl->get_master_clock_rate()/ups_per_sec);
+ _iface->poke32(U2_REG_TX_CTRL_CYCLES_PER_UP, U2_FLAG_TX_CTRL_UP_ENB | cycles_per_up);
+
+ //setting the packets per update
+ const double ups_per_fifo = flow_control_hints.cast<double>("ups_per_fifo", 8);
+ const size_t packets_per_up = size_t(usrp2_impl::sram_bytes/ups_per_fifo/data_transport->get_send_frame_size());
+ _iface->poke32(U2_REG_TX_CTRL_PACKETS_PER_UP, U2_FLAG_TX_CTRL_UP_ENB | packets_per_up);
+
//init the ddc
init_ddc_config();
@@ -105,7 +124,8 @@ usrp2_mboard_impl::usrp2_mboard_impl(
}
usrp2_mboard_impl::~usrp2_mboard_impl(void){
- /* NOP */
+ _iface->poke32(U2_REG_TX_CTRL_CYCLES_PER_UP, 0);
+ _iface->poke32(U2_REG_TX_CTRL_PACKETS_PER_UP, 0);
}
/***********************************************************************
@@ -176,7 +196,7 @@ void usrp2_mboard_impl::handle_overflow(void){
void usrp2_mboard_impl::issue_ddc_stream_cmd(const stream_cmd_t &stream_cmd){
_continuous_streaming = stream_cmd.stream_mode == stream_cmd_t::STREAM_MODE_START_CONTINUOUS;
_iface->poke32(U2_REG_RX_CTRL_STREAM_CMD, dsp_type1::calc_stream_cmd_word(
- stream_cmd, _recv_frame_size
+ stream_cmd, _recv_samps_per_packet
));
_iface->poke32(U2_REG_RX_CTRL_TIME_SECS, boost::uint32_t(stream_cmd.time_spec.get_full_secs()));
_iface->poke32(U2_REG_RX_CTRL_TIME_TICKS, stream_cmd.time_spec.get_tick_count(get_master_clock_freq()));
diff --git a/host/lib/usrp/usrp2/usrp2_iface.cpp b/host/lib/usrp/usrp2/usrp2_iface.cpp
index eb2685efa..ad265fd4c 100644
--- a/host/lib/usrp/usrp2/usrp2_iface.cpp
+++ b/host/lib/usrp/usrp2/usrp2_iface.cpp
@@ -31,18 +31,6 @@ using namespace uhd;
using namespace uhd::usrp;
using namespace uhd::transport;
-/*!
- * FIXME: large timeout, ethernet pause frames...
- *
- * Use a large timeout to work-around the fact that
- * flow-control may throttle outgoing control packets
- * due to its use of ethernet pause frames.
- *
- * This will be fixed when host-based flow control is implemented,
- * along with larger incoming send buffers using the on-board SRAM.
- */
-static const size_t CONTROL_TIMEOUT_MS = 3000; //3 seconds
-
class usrp2_iface_impl : public usrp2_iface{
public:
/***********************************************************************
@@ -190,7 +178,7 @@ public:
boost::uint8_t usrp2_ctrl_data_in_mem[udp_simple::mtu]; //allocate max bytes for recv
const usrp2_ctrl_data_t *ctrl_data_in = reinterpret_cast<const usrp2_ctrl_data_t *>(usrp2_ctrl_data_in_mem);
while(true){
- size_t len = _ctrl_transport->recv(boost::asio::buffer(usrp2_ctrl_data_in_mem), CONTROL_TIMEOUT_MS);
+ size_t len = _ctrl_transport->recv(boost::asio::buffer(usrp2_ctrl_data_in_mem));
if(len >= sizeof(boost::uint32_t) and ntohl(ctrl_data_in->proto_ver) != USRP2_FW_COMPAT_NUM){
throw std::runtime_error(str(boost::format(
"Expected protocol compatibility number %d, but got %d:\n"
diff --git a/host/lib/usrp/usrp2/usrp2_impl.cpp b/host/lib/usrp/usrp2/usrp2_impl.cpp
index 5f549c4fd..e2b3c2cdc 100644
--- a/host/lib/usrp/usrp2/usrp2_impl.cpp
+++ b/host/lib/usrp/usrp2/usrp2_impl.cpp
@@ -17,7 +17,7 @@
#include "usrp2_impl.hpp"
#include <uhd/transport/if_addrs.hpp>
-#include <uhd/transport/udp_simple.hpp>
+#include <uhd/transport/udp_zero_copy.hpp>
#include <uhd/usrp/device_props.hpp>
#include <uhd/utils/assert.hpp>
#include <uhd/utils/static.hpp>
@@ -36,9 +36,6 @@ using namespace uhd::usrp;
using namespace uhd::transport;
namespace asio = boost::asio;
-//! wait this long for a control response when discovering devices
-static const size_t DISCOVERY_TIMEOUT_MS = 100;
-
/***********************************************************************
* Helper Functions
**********************************************************************/
@@ -100,7 +97,7 @@ static uhd::device_addrs_t usrp2_find(const device_addr_t &hint){
boost::uint8_t usrp2_ctrl_data_in_mem[udp_simple::mtu]; //allocate max bytes for recv
const usrp2_ctrl_data_t *ctrl_data_in = reinterpret_cast<const usrp2_ctrl_data_t *>(usrp2_ctrl_data_in_mem);
while(true){
- size_t len = udp_transport->recv(asio::buffer(usrp2_ctrl_data_in_mem), DISCOVERY_TIMEOUT_MS);
+ size_t len = udp_transport->recv(asio::buffer(usrp2_ctrl_data_in_mem));
//std::cout << len << "\n";
if (len > offsetof(usrp2_ctrl_data_t, data) and ntohl(ctrl_data_in->id) == USRP2_CTRL_ID_WAZZUP_DUDE){
//make a boost asio ipv4 with the raw addr in host byte order
@@ -147,7 +144,7 @@ static device::sptr usrp2_make(const device_addr_t &device_addr){
//create a ctrl and data transport for each address
std::vector<udp_simple::sptr> ctrl_transports;
- std::vector<udp_zero_copy::sptr> data_transports;
+ std::vector<zero_copy_if::sptr> data_transports;
BOOST_FOREACH(const std::string &addr, std::split_string(device_addr["addr"])){
ctrl_transports.push_back(udp_simple::make_connected(
@@ -160,7 +157,7 @@ static device::sptr usrp2_make(const device_addr_t &device_addr){
//create the usrp2 implementation guts
return device::sptr(
- new usrp2_impl(ctrl_transports, data_transports)
+ new usrp2_impl(ctrl_transports, data_transports, device_addr)
);
}
@@ -173,7 +170,8 @@ UHD_STATIC_BLOCK(register_usrp2_device){
**********************************************************************/
usrp2_impl::usrp2_impl(
std::vector<udp_simple::sptr> ctrl_transports,
- std::vector<udp_zero_copy::sptr> data_transports
+ std::vector<zero_copy_if::sptr> data_transports,
+ const device_addr_t &flow_control_hints
):
_data_transports(data_transports)
{
@@ -192,7 +190,9 @@ usrp2_impl::usrp2_impl(
//create a new mboard handler for each control transport
for(size_t i = 0; i < ctrl_transports.size(); i++){
_mboards.push_back(usrp2_mboard_impl::sptr(new usrp2_mboard_impl(
- i, ctrl_transports[i], this->get_max_recv_samps_per_packet()
+ i, ctrl_transports[i], data_transports[i],
+ this->get_max_recv_samps_per_packet(),
+ flow_control_hints
)));
//use an empty name when there is only one mboard
std::string name = (ctrl_transports.size() > 1)? boost::lexical_cast<std::string>(i) : "";
diff --git a/host/lib/usrp/usrp2/usrp2_impl.hpp b/host/lib/usrp/usrp2/usrp2_impl.hpp
index 71f52878c..e4980a539 100644
--- a/host/lib/usrp/usrp2/usrp2_impl.hpp
+++ b/host/lib/usrp/usrp2/usrp2_impl.hpp
@@ -84,7 +84,9 @@ public:
usrp2_mboard_impl(
size_t index,
uhd::transport::udp_simple::sptr,
- size_t recv_frame_size
+ uhd::transport::zero_copy_if::sptr,
+ size_t recv_samps_per_packet,
+ const uhd::device_addr_t &flow_control_hints
);
~usrp2_mboard_impl(void);
@@ -96,7 +98,7 @@ public:
private:
size_t _index;
- const size_t _recv_frame_size;
+ const size_t _recv_samps_per_packet;
bool _continuous_streaming;
//interfaces
@@ -173,14 +175,18 @@ private:
*/
class usrp2_impl : public uhd::device{
public:
+ static const size_t sram_bytes = size_t(1 << 20);
+
/*!
* Create a new usrp2 impl base.
* \param ctrl_transports the udp transports for control
* \param data_transports the udp transports for data
+ * \param flow_control_hints optional flow control params
*/
usrp2_impl(
std::vector<uhd::transport::udp_simple::sptr> ctrl_transports,
- std::vector<uhd::transport::udp_zero_copy::sptr> data_transports
+ std::vector<uhd::transport::zero_copy_if::sptr> data_transports,
+ const uhd::device_addr_t &flow_control_hints
);
~usrp2_impl(void);
@@ -210,7 +216,7 @@ private:
uhd::dict<std::string, usrp2_mboard_impl::sptr> _mboard_dict;
//io impl methods and members
- std::vector<uhd::transport::udp_zero_copy::sptr> _data_transports;
+ std::vector<uhd::transport::zero_copy_if::sptr> _data_transports;
uhd::otw_type_t _rx_otw_type, _tx_otw_type;
UHD_PIMPL_DECL(io_impl) _io_impl;
void io_init(void);
diff --git a/host/lib/usrp/usrp2/usrp2_regs.hpp b/host/lib/usrp/usrp2/usrp2_regs.hpp
index 064ad4e95..c3a4d22de 100644
--- a/host/lib/usrp/usrp2/usrp2_regs.hpp
+++ b/host/lib/usrp/usrp2/usrp2_regs.hpp
@@ -193,9 +193,14 @@
#define U2_REG_TX_CTRL_CLEAR_STATE _SR_ADDR(SR_TX_CTRL + 1)
#define U2_REG_TX_CTRL_REPORT_SID _SR_ADDR(SR_TX_CTRL + 2)
#define U2_REG_TX_CTRL_POLICY _SR_ADDR(SR_TX_CTRL + 3)
+#define U2_REG_TX_CTRL_CYCLES_PER_UP _SR_ADDR(SR_TX_CTRL + 4)
+#define U2_REG_TX_CTRL_PACKETS_PER_UP _SR_ADDR(SR_TX_CTRL + 5)
#define U2_FLAG_TX_CTRL_POLICY_WAIT (0x1 << 0)
#define U2_FLAG_TX_CTRL_POLICY_NEXT_PACKET (0x1 << 1)
#define U2_FLAG_TX_CTRL_POLICY_NEXT_BURST (0x1 << 2)
+//enable flag for registers: cycles and packets per update packet
+#define U2_FLAG_TX_CTRL_UP_ENB (1ul << 31)
+
#endif /* INCLUDED_USRP2_REGS_HPP */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 06:23:38 +0000