diff options
Diffstat (limited to 'host')
| -rw-r--r-- | host/include/uhd/types/metadata.hpp | 76 | ||||
| -rw-r--r-- | host/include/uhd/types/tune_request.hpp | 12 |
2 files changed, 43 insertions, 45 deletions
diff --git a/host/include/uhd/types/metadata.hpp b/host/include/uhd/types/metadata.hpp index 65952941c..3f250d13e 100644 --- a/host/include/uhd/types/metadata.hpp +++ b/host/include/uhd/types/metadata.hpp @@ -19,7 +19,6 @@ #define INCLUDED_UHD_TYPES_METADATA_HPP #include <uhd/config.hpp> -#include <boost/cstdint.hpp> #include <uhd/types/time_spec.hpp> namespace uhd{ @@ -30,58 +29,59 @@ namespace uhd{ * The receive routines will convert IF data headers into metadata. */ struct UHD_API rx_metadata_t{ - /*! - * Time specification: - * Set from timestamps on incoming data when provided. - */ + //! Has time specification? bool has_time_spec; + + //! Time of the first sample. time_spec_t time_spec; /*! - * Fragmentation flag and offset: + * Fragmentation flag: * Similar to IPv4 fragmentation: http://en.wikipedia.org/wiki/IPv4#Fragmentation_and_reassembly * More fragments is true when the input buffer has insufficient size to fit * an entire received packet. More fragments will be false for the last fragment. - * The fragment offset is the sample number at the start of the receive buffer. - * For non-fragmented receives, the fragment offset should always be zero. */ bool more_fragments; - size_t fragment_offset; /*! - * Burst flags: - * Start of burst will be true for the first packet in the chain. - * End of burst will be true for the last packet in the chain. + * Fragmentation offset: + * The fragment offset is the sample number at the start of the receive buffer. + * For non-fragmented receives, the fragment offset should always be zero. */ + size_t fragment_offset; + + //! Start of burst will be true for the first packet in the chain. bool start_of_burst; + + //! End of burst will be true for the last packet in the chain. bool end_of_burst; /*! - * Error conditions: - * - none: no error associated with this metadata - * - timeout: no packet received, underlying code timed-out - * - late command: a stream command was issued in the past - * - broken chain: expected another stream command - * - overflow: an internal receive buffer has filled - * - bad packet: the buffer was unrecognizable as a vrt packet + * The error condition on a receive call. * * Note: When an overrun occurs in continuous streaming mode, * the device will continue to send samples to the host. * For other streaming modes, streaming will discontinue * until the user issues a new stream command. * - * Note: The metadata fields have meaning for the following error codes: + * The metadata fields have meaning for the following error codes: * - none * - late command * - broken chain * - overflow */ enum error_code_t { + //! No error associated with this metadata. ERROR_CODE_NONE = 0x0, + //! No packet received, implementation timed-out. ERROR_CODE_TIMEOUT = 0x1, + //! A stream command was issued in the past. ERROR_CODE_LATE_COMMAND = 0x2, + //! Expected another stream command. ERROR_CODE_BROKEN_CHAIN = 0x4, + //! An internal receive buffer has filled. ERROR_CODE_OVERFLOW = 0x8, + //! The packet could not be parsed. ERROR_CODE_BAD_PACKET = 0xf } error_code; }; @@ -93,19 +93,19 @@ namespace uhd{ */ struct UHD_API tx_metadata_t{ /*! - * Time specification: - * Set has time spec to false to perform a send "now". - * Or, set to true, and fill in time spec for a send "at". + * Has time specification? + * - Set false to send immediately. + * - Set true to send at the time specified by time spec. */ bool has_time_spec; + + //! When to send the first sample. time_spec_t time_spec; - /*! - * Burst flags: - * Set start of burst to true for the first packet in the chain. - * Set end of burst to true for the last packet in the chain. - */ + //! Set start of burst to true for the first packet in the chain. bool start_of_burst; + + //! Set end of burst to true for the last packet in the chain. bool end_of_burst; /*! @@ -122,27 +122,27 @@ namespace uhd{ //! The channel number in a mimo configuration size_t channel; - /*! - * Time specification: when the async event occurred. - */ + //! Has time specification? bool has_time_spec; + + //! When the async event occurred. time_spec_t time_spec; /*! - * Event codes: - * - success: a packet was successfully transmitted - * - underflow: an internal send buffer has emptied - * - sequence error: packet loss between host and device - * - time error: packet had time that was late (or too early) - * - underflow in packet: underflow occurred inside a packet - * - sequence error in burst: packet loss within a burst + * The type of event for a receive async message call. */ enum event_code_t { + //! A packet was successfully transmitted. EVENT_CODE_SUCCESS = 0x1, + //! An internal send buffer has emptied. EVENT_CODE_UNDERFLOW = 0x2, + //! Packet loss between host and device. EVENT_CODE_SEQ_ERROR = 0x4, + //! Packet had time that was late (or too early). EVENT_CODE_TIME_ERROR = 0x8, + //! Underflow occurred inside a packet. EVENT_CODE_UNDERFLOW_IN_PACKET = 0x10, + //! Packet loss within a burst. EVENT_CODE_SEQ_ERROR_IN_BURST = 0x20 } event_code; }; diff --git a/host/include/uhd/types/tune_request.hpp b/host/include/uhd/types/tune_request.hpp index f80d2cb15..b05ab5cc7 100644 --- a/host/include/uhd/types/tune_request.hpp +++ b/host/include/uhd/types/tune_request.hpp @@ -48,21 +48,19 @@ namespace uhd{ */ tune_request_t(double target_freq, double lo_off); - /*! - * Policy types for tune arguments: - * - None: do not set this argument, use current setting - * - Auto: automatically determine the argument's value - * - Manual: use the argument's value for the setting - */ + //! Policy options for tunable elements in the RF chain. enum policy_t { + //! Do not set this argument, use current setting. POLICY_NONE = 'N', + //! Automatically determine the argument's value. POLICY_AUTO = 'A', + //! Use the argument's value for the setting. POLICY_MANUAL = 'M' }; /*! * The target frequency of the overall chain in Hz. - * Use when one of the policies is set to automatic. + * Use in conjunction with the automatic policies. */ double target_freq; |