diff options
Diffstat (limited to 'host')
22 files changed, 299 insertions, 1123 deletions
diff --git a/host/docs/coding.rst b/host/docs/coding.rst index 7533445ea..ecca4e8b8 100644 --- a/host/docs/coding.rst +++ b/host/docs/coding.rst @@ -23,40 +23,10 @@ The device API provides ways to: See the documentation in *device.hpp* for reference. ^^^^^^^^^^^^^^^^^^^^^^^^^^^ -High-Level: The single usrp -^^^^^^^^^^^^^^^^^^^^^^^^^^^ -The goal of the single usrp API is to wrap high level functions around the device properties. -The single usrp provides a fat interface to access the most common properties. -The single usrp provides ways to: - -* Set and get daughterboard gains. -* Set and get daughterboard antennas. -* Set and get the streaming rates. -* Tune the DSPs and daughterboards. -* Issue stream commands. -* Set the clock configuration. -* Set the usrp time registers. -* Get the underlying device (as discussed above). - -See the documentation in *usrp/single_usrp.hpp* for reference. - -^^^^^^^^^^^^^^^^^^^^^^^^^^^ High-Level: The multi usrp ^^^^^^^^^^^^^^^^^^^^^^^^^^^ -The multi usrp API provides a wrapper around a device that represents several motherboards. -This API provides convenience calls just like the single usrp, -however the calls either work across all channels in the configuration, -or take a channel argument to specify which channel to configure. -The multi usrp provides ways to: - -* Set and get the sample rate across all channels. -* Issue a stream command across all channels. -* Set the time registers across all channels. -* Set and get individual daughterboard gains. -* Set and get individual daughterboard antennas. -* Tune individual DSPs and daughterboards. -* Get the underlying device (as discussed above). - +The Multi-USRP class provides a FAT interface to a single USRP with +one or more channels, or multiple USRPs in a homogeneous setup. See the documentation in *usrp/multi_usrp.hpp* for reference. ------------------------------------------------------------------------ diff --git a/host/examples/benchmark_rx_rate.cpp b/host/examples/benchmark_rx_rate.cpp index c993af970..118bf413c 100644 --- a/host/examples/benchmark_rx_rate.cpp +++ b/host/examples/benchmark_rx_rate.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -17,7 +17,7 @@ #include <uhd/utils/thread_priority.hpp> #include <uhd/utils/safe_main.hpp> -#include <uhd/usrp/single_usrp.hpp> +#include <uhd/usrp/multi_usrp.hpp> #include <boost/math/special_functions/round.hpp> #include <boost/program_options.hpp> #include <boost/format.hpp> @@ -27,19 +27,19 @@ namespace po = boost::program_options; static inline void test_device( - uhd::usrp::single_usrp::sptr sdev, + uhd::usrp::multi_usrp::sptr usrp, double rx_rate_sps, double duration_secs ){ - uhd::device::sptr dev = sdev->get_device(); + const size_t max_samps_per_packet = usrp->get_device()->get_max_recv_samps_per_packet(); std::cout << boost::format("Testing receive rate %f Msps (%f second run)") % (rx_rate_sps/1e6) % duration_secs << std::endl; //allocate recv buffer and metatdata uhd::rx_metadata_t md; - std::vector<std::complex<float> > buff(dev->get_max_recv_samps_per_packet()); + std::vector<std::complex<float> > buff(max_samps_per_packet); //flush the buffers in the recv path - while(dev->recv( + while(usrp->get_device()->recv( &buff.front(), buff.size(), md, uhd::io_type_t::COMPLEX_FLOAT32, uhd::device::RECV_MODE_ONE_PACKET @@ -55,9 +55,9 @@ static inline void test_device( uhd::time_spec_t initial_time_spec; uhd::time_spec_t next_expected_time_spec; - sdev->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS); + usrp->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS); do { - size_t num_rx_samps = dev->recv( + size_t num_rx_samps = usrp->get_device()->recv( &buff.front(), buff.size(), md, uhd::io_type_t::COMPLEX_FLOAT32, uhd::device::RECV_MODE_ONE_PACKET @@ -94,14 +94,14 @@ static inline void test_device( next_expected_time_spec = md.time_spec + uhd::time_spec_t(0, num_rx_samps, rx_rate_sps); } while((next_expected_time_spec - initial_time_spec) < uhd::time_spec_t(duration_secs)); - sdev->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); + usrp->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); //print a summary std::cout << std::endl; //go to newline, recv may spew SXSYSZ... std::cout << boost::format(" Received packets: %d") % total_recv_packets << std::endl; std::cout << boost::format(" Received samples: %d") % total_recv_samples << std::endl; std::cout << boost::format(" Lost samples: %d") % total_lost_samples << std::endl; - size_t packets_lost = boost::math::iround(double(total_lost_samples)/dev->get_max_recv_samps_per_packet()); + size_t packets_lost = boost::math::iround(double(total_lost_samples)/max_samps_per_packet); std::cout << boost::format(" Lost packets: %d (approximate)") % packets_lost << std::endl; double actual_rx_rate_sps = (total_recv_samples*rx_rate_sps)/(total_recv_samples+total_lost_samples); std::cout << boost::format(" Sustained receive rate: %f Msps") % (actual_rx_rate_sps/1e6) << std::endl; @@ -137,22 +137,22 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //create a usrp device std::cout << std::endl; std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; - uhd::usrp::single_usrp::sptr sdev = uhd::usrp::single_usrp::make(args); - std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; if (not vm.count("rate")){ - sdev->set_rx_rate(500e3); //initial rate + usrp->set_rx_rate(500e3); //initial rate while(true){ - double rate = sdev->get_rx_rate(); - test_device(sdev, rate, duration); - sdev->set_rx_rate(rate*2); //double the rate - if (sdev->get_rx_rate() == rate) break; + double rate = usrp->get_rx_rate(); + test_device(usrp, rate, duration); + usrp->set_rx_rate(rate*2); //double the rate + if (usrp->get_rx_rate() == rate) break; } } else{ - sdev->set_rx_rate(only_rate); - double rate = sdev->get_rx_rate(); - test_device(sdev, rate, duration); + usrp->set_rx_rate(only_rate); + double rate = usrp->get_rx_rate(); + test_device(usrp, rate, duration); } //finished diff --git a/host/examples/rx_ascii_art_dft.cpp b/host/examples/rx_ascii_art_dft.cpp index 260feca24..c407ecf91 100644 --- a/host/examples/rx_ascii_art_dft.cpp +++ b/host/examples/rx_ascii_art_dft.cpp @@ -17,10 +17,10 @@ #include <uhd/utils/thread_priority.hpp> #include <uhd/utils/safe_main.hpp> -#include <uhd/usrp/single_usrp.hpp> +#include <uhd/usrp/multi_usrp.hpp> #include "ascii_art_dft.hpp" //implementation #include <boost/program_options.hpp> -#include <boost/thread.hpp> //gets time +#include <boost/thread/thread.hpp> //gets time #include <boost/format.hpp> #include <curses.h> #include <iostream> @@ -41,7 +41,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ po::options_description desc("Allowed options"); desc.add_options() ("help", "help message") - ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ("args", po::value<std::string>(&args)->default_value(""), "multi uhd device address args") // hardware parameters ("rate", po::value<double>(&rate), "rate of incoming samples (sps)") ("freq", po::value<double>(&freq)->default_value(0), "RF center frequency in Hz") @@ -65,23 +65,23 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //create a usrp device std::cout << std::endl; std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; - uhd::usrp::single_usrp::sptr sdev = uhd::usrp::single_usrp::make(args); - std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; //set the rx sample rate std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl; - sdev->set_rx_rate(rate); - std::cout << boost::format("Actual RX Rate: %f Msps...") % (sdev->get_rx_rate()/1e6) << std::endl << std::endl; + usrp->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl << std::endl; //set the rx center frequency std::cout << boost::format("Setting RX Freq: %f Mhz...") % (freq/1e6) << std::endl; - sdev->set_rx_freq(freq); - std::cout << boost::format("Actual RX Freq: %f Mhz...") % (sdev->get_rx_freq()/1e6) << std::endl << std::endl; + usrp->set_rx_freq(freq); + std::cout << boost::format("Actual RX Freq: %f Mhz...") % (usrp->get_rx_freq()/1e6) << std::endl << std::endl; //set the rx rf gain std::cout << boost::format("Setting RX Gain: %f dB...") % gain << std::endl; - sdev->set_rx_gain(gain); - std::cout << boost::format("Actual RX Gain: %f dB...") % sdev->get_rx_gain() << std::endl << std::endl; + usrp->set_rx_gain(gain); + std::cout << boost::format("Actual RX Gain: %f dB...") % usrp->get_rx_gain() << std::endl << std::endl; //allocate recv buffer and metatdata uhd::rx_metadata_t md; @@ -90,7 +90,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //-- Initialize //------------------------------------------------------------------ initscr(); //curses init - sdev->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS); + usrp->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS); boost::system_time next_refresh = boost::get_system_time(); //------------------------------------------------------------------ @@ -98,7 +98,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //------------------------------------------------------------------ while (true){ //read a buffer's worth of samples every iteration - size_t num_rx_samps = sdev->get_device()->recv( + size_t num_rx_samps = usrp->get_device()->recv( &buff.front(), buff.size(), md, uhd::io_type_t::COMPLEX_FLOAT32, uhd::device::RECV_MODE_FULL_BUFF @@ -115,8 +115,8 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ ); std::string frame = acsii_art_dft::dft_to_plot( lpdft, COLS, LINES, - sdev->get_rx_rate(), - sdev->get_rx_freq(), + usrp->get_rx_rate(), + usrp->get_rx_freq(), dyn_rng, ref_lvl ); @@ -133,7 +133,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //------------------------------------------------------------------ //-- Cleanup //------------------------------------------------------------------ - sdev->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); + usrp->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); endwin(); //curses done //finished diff --git a/host/examples/rx_samples_to_file.cpp b/host/examples/rx_samples_to_file.cpp index 81977035e..296f480b0 100644 --- a/host/examples/rx_samples_to_file.cpp +++ b/host/examples/rx_samples_to_file.cpp @@ -17,7 +17,7 @@ #include <uhd/utils/thread_priority.hpp> #include <uhd/utils/safe_main.hpp> -#include <uhd/usrp/single_usrp.hpp> +#include <uhd/usrp/multi_usrp.hpp> #include <boost/program_options.hpp> #include <boost/format.hpp> #include <boost/thread.hpp> @@ -39,7 +39,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ po::options_description desc("Allowed options"); desc.add_options() ("help", "help message") - ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ("args", po::value<std::string>(&args)->default_value(""), "multi uhd device address args") ("file", po::value<std::string>(&file)->default_value("out.16sc.dat"), "name of the file to write binary samples to") ("nsamps", po::value<size_t>(&total_num_samps)->default_value(1000), "total number of samples to receive") ("rate", po::value<double>(&rate)->default_value(100e6/16), "rate of incoming samples") @@ -52,49 +52,48 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //print the help message if (vm.count("help")){ - std::cout << boost::format("UHD RX to File %s") % desc << std::endl; + std::cout << boost::format("UHD RX samples to file %s") % desc << std::endl; return ~0; } //create a usrp device std::cout << std::endl; std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; - uhd::usrp::single_usrp::sptr sdev = uhd::usrp::single_usrp::make(args); - uhd::device::sptr dev = sdev->get_device(); - std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; //set the rx sample rate std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl; - sdev->set_rx_rate(rate); - std::cout << boost::format("Actual RX Rate: %f Msps...") % (sdev->get_rx_rate()/1e6) << std::endl << std::endl; + usrp->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl << std::endl; //set the rx center frequency std::cout << boost::format("Setting RX Freq: %f Mhz...") % (freq/1e6) << std::endl; - sdev->set_rx_freq(freq); - std::cout << boost::format("Actual RX Freq: %f Mhz...") % (sdev->get_rx_freq()/1e6) << std::endl << std::endl; + usrp->set_rx_freq(freq); + std::cout << boost::format("Actual RX Freq: %f Mhz...") % (usrp->get_rx_freq()/1e6) << std::endl << std::endl; //set the rx rf gain std::cout << boost::format("Setting RX Gain: %f dB...") % gain << std::endl; - sdev->set_rx_gain(gain); - std::cout << boost::format("Actual RX Gain: %f dB...") % sdev->get_rx_gain() << std::endl << std::endl; + usrp->set_rx_gain(gain); + std::cout << boost::format("Actual RX Gain: %f dB...") % usrp->get_rx_gain() << std::endl << std::endl; boost::this_thread::sleep(boost::posix_time::seconds(1)); //allow for some setup time - std::cout << "LO Locked = " << sdev->get_rx_lo_locked() << std::endl; + std::cout << "LO Locked = " << usrp->get_rx_lo_locked() << std::endl; //setup streaming uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); stream_cmd.num_samps = total_num_samps; stream_cmd.stream_now = true; - sdev->issue_stream_cmd(stream_cmd); + usrp->issue_stream_cmd(stream_cmd); //loop until total number of samples reached size_t num_acc_samps = 0; //number of accumulated samples uhd::rx_metadata_t md; - std::vector<std::complex<short> > buff(dev->get_max_recv_samps_per_packet()); + std::vector<std::complex<short> > buff(usrp->get_device()->get_max_recv_samps_per_packet()); std::ofstream outfile(file.c_str(), std::ofstream::binary); while(num_acc_samps < total_num_samps){ - size_t num_rx_samps = dev->recv( + size_t num_rx_samps = usrp->get_device()->recv( &buff.front(), buff.size(), md, uhd::io_type_t::COMPLEX_INT16, uhd::device::RECV_MODE_ONE_PACKET diff --git a/host/examples/rx_samples_to_udp.cpp b/host/examples/rx_samples_to_udp.cpp index 55b9a50ba..801d8e361 100644 --- a/host/examples/rx_samples_to_udp.cpp +++ b/host/examples/rx_samples_to_udp.cpp @@ -17,7 +17,7 @@ #include <uhd/utils/thread_priority.hpp> #include <uhd/utils/safe_main.hpp> -#include <uhd/usrp/single_usrp.hpp> +#include <uhd/usrp/multi_usrp.hpp> #include <uhd/transport/udp_simple.hpp> #include <boost/program_options.hpp> #include <boost/format.hpp> @@ -40,7 +40,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ po::options_description desc("Allowed options"); desc.add_options() ("help", "help message") - ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ("args", po::value<std::string>(&args)->default_value(""), "multi uhd device address args") ("nsamps", po::value<size_t>(&total_num_samps)->default_value(1000), "total number of samples to receive") ("rate", po::value<double>(&rate)->default_value(100e6/16), "rate of incoming samples") ("freq", po::value<double>(&freq)->default_value(0), "rf center frequency in Hz") @@ -61,42 +61,41 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //create a usrp device std::cout << std::endl; std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; - uhd::usrp::single_usrp::sptr sdev = uhd::usrp::single_usrp::make(args); - uhd::device::sptr dev = sdev->get_device(); - std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; //set the rx sample rate std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl; - sdev->set_rx_rate(rate); - std::cout << boost::format("Actual RX Rate: %f Msps...") % (sdev->get_rx_rate()/1e6) << std::endl << std::endl; + usrp->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl << std::endl; //set the rx center frequency std::cout << boost::format("Setting RX Freq: %f Mhz...") % (freq/1e6) << std::endl; - sdev->set_rx_freq(freq); - std::cout << boost::format("Actual RX Freq: %f Mhz...") % (sdev->get_rx_freq()/1e6) << std::endl << std::endl; + usrp->set_rx_freq(freq); + std::cout << boost::format("Actual RX Freq: %f Mhz...") % (usrp->get_rx_freq()/1e6) << std::endl << std::endl; //set the rx rf gain std::cout << boost::format("Setting RX Gain: %f dB...") % gain << std::endl; - sdev->set_rx_gain(gain); - std::cout << boost::format("Actual RX Gain: %f dB...") % sdev->get_rx_gain() << std::endl << std::endl; + usrp->set_rx_gain(gain); + std::cout << boost::format("Actual RX Gain: %f dB...") % usrp->get_rx_gain() << std::endl << std::endl; boost::this_thread::sleep(boost::posix_time::seconds(1)); //allow for some setup time - std::cout << "LO Locked = " << sdev->get_rx_lo_locked() << std::endl; + std::cout << "LO Locked = " << usrp->get_rx_lo_locked() << std::endl; //setup streaming uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); stream_cmd.num_samps = total_num_samps; stream_cmd.stream_now = true; - sdev->issue_stream_cmd(stream_cmd); + usrp->issue_stream_cmd(stream_cmd); //loop until total number of samples reached size_t num_acc_samps = 0; //number of accumulated samples uhd::rx_metadata_t md; - std::vector<std::complex<float> > buff(dev->get_max_recv_samps_per_packet()); + std::vector<std::complex<float> > buff(usrp->get_device()->get_max_recv_samps_per_packet()); uhd::transport::udp_simple::sptr udp_xport = uhd::transport::udp_simple::make_connected(addr, port); while(num_acc_samps < total_num_samps){ - size_t num_rx_samps = dev->recv( + size_t num_rx_samps = usrp->get_device()->recv( &buff.front(), buff.size(), md, uhd::io_type_t::COMPLEX_FLOAT32, uhd::device::RECV_MODE_ONE_PACKET diff --git a/host/examples/rx_timed_samples.cpp b/host/examples/rx_timed_samples.cpp index a19532f50..9ebe36c5a 100644 --- a/host/examples/rx_timed_samples.cpp +++ b/host/examples/rx_timed_samples.cpp @@ -17,7 +17,7 @@ #include <uhd/utils/thread_priority.hpp> #include <uhd/utils/safe_main.hpp> -#include <uhd/usrp/single_usrp.hpp> +#include <uhd/usrp/multi_usrp.hpp> #include <boost/program_options.hpp> #include <boost/format.hpp> #include <iostream> @@ -60,22 +60,21 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //create a usrp device std::cout << std::endl; std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; - uhd::usrp::single_usrp::sptr sdev = uhd::usrp::single_usrp::make(args); - uhd::device::sptr dev = sdev->get_device(); - std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; //set the rx sample rate std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl; - sdev->set_rx_rate(rate); - std::cout << boost::format("Actual RX Rate: %f Msps...") % (sdev->get_rx_rate()/1e6) << std::endl << std::endl; + usrp->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl << std::endl; //set the rx center frequency std::cout << boost::format("Setting RX Freq: %f Mhz...") % (freq/1e6) << std::endl; - sdev->set_rx_freq(freq); - std::cout << boost::format("Actual RX Freq: %f Mhz...") % (sdev->get_rx_freq()/1e6) << std::endl << std::endl; + usrp->set_rx_freq(freq); + std::cout << boost::format("Actual RX Freq: %f Mhz...") % (usrp->get_rx_freq()/1e6) << std::endl << std::endl; std::cout << boost::format("Setting device timestamp to 0...") << std::endl; - sdev->set_time_now(uhd::time_spec_t(0.0)); + usrp->set_time_now(uhd::time_spec_t(0.0)); //setup streaming std::cout << std::endl; @@ -86,14 +85,16 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ stream_cmd.num_samps = total_num_samps; stream_cmd.stream_now = false; stream_cmd.time_spec = uhd::time_spec_t(seconds_in_future); - sdev->issue_stream_cmd(stream_cmd); + usrp->issue_stream_cmd(stream_cmd); + + //allocate buffer to receive + std::vector<std::complex<float> > buff(usrp->get_device()->get_max_recv_samps_per_packet()); //loop until total number of samples reached size_t num_acc_samps = 0; //number of accumulated samples while(num_acc_samps < total_num_samps){ uhd::rx_metadata_t md; - std::vector<std::complex<float> > buff(dev->get_max_recv_samps_per_packet()); - size_t num_rx_samps = dev->recv( + size_t num_rx_samps = usrp->get_device()->recv( &buff.front(), buff.size(), md, uhd::io_type_t::COMPLEX_FLOAT32, uhd::device::RECV_MODE_ONE_PACKET diff --git a/host/examples/test_async_messages.cpp b/host/examples/test_async_messages.cpp index b1d9d56d4..7f1094ee0 100644 --- a/host/examples/test_async_messages.cpp +++ b/host/examples/test_async_messages.cpp @@ -18,7 +18,7 @@ #include <uhd/utils/thread_priority.hpp> #include <uhd/utils/safe_main.hpp> #include <uhd/utils/static.hpp> -#include <uhd/usrp/single_usrp.hpp> +#include <uhd/usrp/multi_usrp.hpp> #include <boost/assign/list_of.hpp> #include <boost/program_options.hpp> #include <boost/foreach.hpp> @@ -35,8 +35,7 @@ namespace po = boost::program_options; * Send a burst of many samples that will fragment internally. * We expect to get an burst ack async message. */ -bool test_burst_ack_message(uhd::usrp::single_usrp::sptr sdev){ - uhd::device::sptr dev = sdev->get_device(); +bool test_burst_ack_message(uhd::usrp::multi_usrp::sptr usrp){ std::cout << "Test burst ack message... " << std::flush; uhd::tx_metadata_t md; @@ -45,16 +44,16 @@ bool test_burst_ack_message(uhd::usrp::single_usrp::sptr sdev){ md.has_time_spec = false; //3 times max-sps guarantees a SOB, no burst, and EOB packet - std::vector<std::complex<float> > buff(dev->get_max_send_samps_per_packet()*3); + std::vector<std::complex<float> > buff(usrp->get_device()->get_max_send_samps_per_packet()*3); - dev->send( + usrp->get_device()->send( &buff.front(), buff.size(), md, uhd::io_type_t::COMPLEX_FLOAT32, uhd::device::SEND_MODE_FULL_BUFF ); uhd::async_metadata_t async_md; - if (not dev->recv_async_msg(async_md)){ + if (not usrp->get_device()->recv_async_msg(async_md)){ std::cout << boost::format( "failed:\n" " Async message recv timed out.\n" @@ -84,8 +83,7 @@ bool test_burst_ack_message(uhd::usrp::single_usrp::sptr sdev){ * Send a start of burst packet with no following end of burst. * We expect to get an underflow(within a burst) async message. */ -bool test_underflow_message(uhd::usrp::single_usrp::sptr sdev){ - uhd::device::sptr dev = sdev->get_device(); +bool test_underflow_message(uhd::usrp::multi_usrp::sptr usrp){ std::cout << "Test underflow message... " << std::flush; uhd::tx_metadata_t md; @@ -93,14 +91,14 @@ bool test_underflow_message(uhd::usrp::single_usrp::sptr sdev){ md.end_of_burst = false; md.has_time_spec = false; - dev->send( + usrp->get_device()->send( NULL, 0, md, uhd::io_type_t::COMPLEX_FLOAT32, uhd::device::SEND_MODE_FULL_BUFF ); uhd::async_metadata_t async_md; - if (not dev->recv_async_msg(async_md, 1)){ + if (not usrp->get_device()->recv_async_msg(async_md, 1)){ std::cout << boost::format( "failed:\n" " Async message recv timed out.\n" @@ -130,8 +128,7 @@ bool test_underflow_message(uhd::usrp::single_usrp::sptr sdev){ * Send a burst packet that occurs at a time in the past. * We expect to get a time error async message. */ -bool test_time_error_message(uhd::usrp::single_usrp::sptr sdev){ - uhd::device::sptr dev = sdev->get_device(); +bool test_time_error_message(uhd::usrp::multi_usrp::sptr usrp){ std::cout << "Test time error message... " << std::flush; uhd::tx_metadata_t md; @@ -140,16 +137,16 @@ bool test_time_error_message(uhd::usrp::single_usrp::sptr sdev){ md.has_time_spec = true; md.time_spec = uhd::time_spec_t(100.0); //send at 100s - sdev->set_time_now(uhd::time_spec_t(200.0)); //time at 200s + usrp->set_time_now(uhd::time_spec_t(200.0)); //time at 200s - dev->send( + usrp->get_device()->send( NULL, 0, md, uhd::io_type_t::COMPLEX_FLOAT32, uhd::device::SEND_MODE_FULL_BUFF ); uhd::async_metadata_t async_md; - if (not dev->recv_async_msg(async_md)){ + if (not usrp->get_device()->recv_async_msg(async_md)){ std::cout << boost::format( "failed:\n" " Async message recv timed out.\n" @@ -174,10 +171,9 @@ bool test_time_error_message(uhd::usrp::single_usrp::sptr sdev){ } } -void flush_async_md(uhd::usrp::single_usrp::sptr sdev){ - uhd::device::sptr dev = sdev->get_device(); +void flush_async_md(uhd::usrp::multi_usrp::sptr usrp){ uhd::async_metadata_t async_md; - while (dev->recv_async_msg(async_md, 1.0)){} + while (usrp->get_device()->recv_async_msg(async_md, 1.0)){} } int UHD_SAFE_MAIN(int argc, char *argv[]){ @@ -192,7 +188,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ po::options_description desc("Allowed options"); desc.add_options() ("help", "help message") - ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ("args", po::value<std::string>(&args)->default_value(""), "multi uhd device address args") ("rate", po::value<double>(&rate)->default_value(1.5e6), "rate of outgoing samples") ("ntests", po::value<size_t>(&ntests)->default_value(10), "number of tests to run") ; @@ -209,18 +205,18 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //create a usrp device std::cout << std::endl; std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; - uhd::usrp::single_usrp::sptr sdev = uhd::usrp::single_usrp::make(args); - std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; //set the tx sample rate std::cout << boost::format("Setting TX Rate: %f Msps...") % (rate/1e6) << std::endl; - sdev->set_tx_rate(rate); - std::cout << boost::format("Actual TX Rate: %f Msps...") % (sdev->get_tx_rate()/1e6) << std::endl << std::endl; + usrp->set_tx_rate(rate); + std::cout << boost::format("Actual TX Rate: %f Msps...") % (usrp->get_tx_rate()/1e6) << std::endl << std::endl; //------------------------------------------------------------------ // begin asyc messages test //------------------------------------------------------------------ - static const uhd::dict<std::string, boost::function<bool(uhd::usrp::single_usrp::sptr)> > + static const uhd::dict<std::string, boost::function<bool(uhd::usrp::multi_usrp::sptr)> > tests = boost::assign::map_list_of ("Test Burst ACK ", &test_burst_ack_message) ("Test Underflow ", &test_underflow_message) @@ -237,8 +233,8 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //run the tests, pick at random for (size_t n = 0; n < ntests; n++){ std::string key = tests.keys()[std::rand() % tests.size()]; - bool pass = tests[key](sdev); - flush_async_md(sdev); + bool pass = tests[key](usrp); + flush_async_md(usrp); //store result if (pass) successes[key]++; diff --git a/host/examples/test_pps_input.cpp b/host/examples/test_pps_input.cpp index 273c73df0..994b7ca87 100644 --- a/host/examples/test_pps_input.cpp +++ b/host/examples/test_pps_input.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -51,13 +51,12 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //create a usrp device std::cout << std::endl; std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; - uhd::usrp::multi_usrp::sptr sdev = uhd::usrp::multi_usrp::make(args); - uhd::device::sptr dev = sdev->get_device(); - std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; //set the time at an unknown pps (will throw if no pps) std::cout << std::endl << "Attempt to detect the PPS and set the time..." << std::endl << std::endl; - sdev->set_time_unknown_pps(uhd::time_spec_t(0.0)); + usrp->set_time_unknown_pps(uhd::time_spec_t(0.0)); std::cout << std::endl << "Success!" << std::endl << std::endl; return 0; } diff --git a/host/examples/tx_from_file.cpp b/host/examples/tx_from_file.cpp deleted file mode 100644 index 8af9b0f4a..000000000 --- a/host/examples/tx_from_file.cpp +++ /dev/null @@ -1,124 +0,0 @@ -// -// Copyright 2010-2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#include <uhd/utils/thread_priority.hpp> -#include <uhd/utils/safe_main.hpp> -#include <uhd/usrp/simple_usrp.hpp> -#include <boost/program_options.hpp> -#include <boost/format.hpp> -#include <iostream> -#include <complex> -#include <fstream> - -namespace po = boost::program_options; - -int UHD_SAFE_MAIN(int argc, char *argv[]){ - uhd::set_thread_priority_safe(); - - //variables to be set by po - std::string args; - double seconds_in_future; - size_t total_num_samps; - size_t samps_per_packet; - double tx_rate, freq, gain; - float ampl; - - //setup the program options - po::options_description desc("Allowed options"); - desc.add_options() - ("help", "help message") - ("args", po::value<std::string>(&args)->default_value(""), "simple uhd device address args") - ("secs", po::value<double>(&seconds_in_future)->default_value(3), "number of seconds in the future to transmit") - ("nsamps", po::value<size_t>(&total_num_samps)->default_value(1000), "total number of samples to transmit") - ("txrate", po::value<double>(&tx_rate)->default_value(100e6/16), "rate of outgoing samples") - ("freq", po::value<double>(&freq)->default_value(0), "rf center frequency in Hz") - ("ampl", po::value<float>(&l)->default_value(float(0.3)), "amplitude of each sample") - ("gain", po::value<double>(&gain)->default_value(0), "amplitude of each sample") - ("dilv", "specify to disable inner-loop verbose") - ; - po::variables_map vm; - po::store(po::parse_command_line(argc, argv, desc), vm); - po::notify(vm); - - //print the help message - if (vm.count("help")){ - std::cout << boost::format("UHD TX Timed Samples %s") % desc << std::endl; - return ~0; - } - - bool verbose = vm.count("dilv") == 0; - - //create a usrp device - std::cout << std::endl; - std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; - uhd::usrp::simple_usrp::sptr sdev = uhd::usrp::simple_usrp::make(args); - uhd::device::sptr dev = sdev->get_device(); - std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl; - - //set properties on the device - std::cout << boost::format("Setting TX Rate: %f Msps...") % (tx_rate/1e6) << std::endl; - sdev->set_tx_rate(tx_rate); - std::cout << boost::format("Actual TX Rate: %f Msps...") % (sdev->get_tx_rate()/1e6) << std::endl; - std::cout << boost::format("Setting device timestamp to 0...") << std::endl; - sdev->set_tx_freq(freq); - sdev->set_time_now(uhd::time_spec_t(0.0)); - - sdev->set_gain(gain); - - //allocate data to send - std::vector<std::complex<short> > buff; - uhd::tx_metadata_t md; - - std::cout << "Read data to send from file: in.dat" << std::endl; - std::ifstream infile("in.dat", std::ifstream::binary); - while (!infile.eof()) { - std::complex<short> c; - infile.read((char *)&c, sizeof(std::complex<short>)); - if (!((c.real() == 0) && (c.imag() == 0))) { - buff.push_back(c); -//std::cout << "C = " << c << std::endl; - } - } - samps_per_packet = buff.size(); - infile.close(); - std::cout << "Number of samples in file: " << samps_per_packet << std::endl; - - //send the data in multiple packets - size_t num_packets = (total_num_samps+samps_per_packet-1)/samps_per_packet; - for (size_t i = 0; i < num_packets; i++){ - //setup the metadata flags and time spec - md.start_of_burst = (i == 0); //only first packet has SOB - md.end_of_burst = (i == num_packets-1); //only last packet has EOB - md.has_time_spec = (i == 0); //only first packet has time - md.time_spec = uhd::time_spec_t(seconds_in_future); - - size_t samps_to_send = std::min(total_num_samps - samps_per_packet*i, samps_per_packet); - - //send the entire packet (driver fragments internally) - size_t num_tx_samps = dev->send( - &buff.front(), samps_to_send, md, - uhd::io_type_t::COMPLEX_INT16, - uhd::device::SEND_MODE_FULL_BUFF - ); - if(verbose) std::cout << std::endl << boost::format("Sent %d samples") % num_tx_samps << std::endl; - } - - //finished - std::cout << std::endl << "Done!" << std::endl << std::endl; - - return 0; -} diff --git a/host/examples/tx_timed_samples.cpp b/host/examples/tx_timed_samples.cpp index 6d6aa7010..f10d7e4ea 100644 --- a/host/examples/tx_timed_samples.cpp +++ b/host/examples/tx_timed_samples.cpp @@ -17,8 +17,9 @@ #include <uhd/utils/thread_priority.hpp> #include <uhd/utils/safe_main.hpp> -#include <uhd/usrp/single_usrp.hpp> +#include <uhd/usrp/multi_usrp.hpp> #include <boost/program_options.hpp> +#include <boost/thread/thread.hpp> #include <boost/format.hpp> #include <iostream> #include <complex> @@ -64,22 +65,21 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //create a usrp device std::cout << std::endl; std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; - uhd::usrp::single_usrp::sptr sdev = uhd::usrp::single_usrp::make(args); - uhd::device::sptr dev = sdev->get_device(); - std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; //set the tx sample rate std::cout << boost::format("Setting TX Rate: %f Msps...") % (rate/1e6) << std::endl; - sdev->set_tx_rate(rate); - std::cout << boost::format("Actual TX Rate: %f Msps...") % (sdev->get_tx_rate()/1e6) << std::endl << std::endl; + usrp->set_tx_rate(rate); + std::cout << boost::format("Actual TX Rate: %f Msps...") % (usrp->get_tx_rate()/1e6) << std::endl << std::endl; //set the tx center frequency std::cout << boost::format("Setting TX Freq: %f Mhz...") % (freq/1e6) << std::endl; - sdev->set_tx_freq(freq); - std::cout << boost::format("Actual TX Freq: %f Mhz...") % (sdev->get_tx_freq()/1e6) << std::endl << std::endl; + usrp->set_tx_freq(freq); + std::cout << boost::format("Actual TX Freq: %f Mhz...") % (usrp->get_tx_freq()/1e6) << std::endl << std::endl; std::cout << boost::format("Setting device timestamp to 0...") << std::endl; - sdev->set_time_now(uhd::time_spec_t(0.0)); + usrp->set_time_now(uhd::time_spec_t(0.0)); //allocate data to send std::vector<std::complex<float> > buff(samps_per_packet, std::complex<float>(ampl, ampl)); @@ -99,7 +99,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ size_t samps_to_send = std::min(total_num_samps - samps_per_packet*i, samps_per_packet); //send the entire packet (driver fragments internally) - size_t num_tx_samps = dev->send( + size_t num_tx_samps = usrp->get_device()->send( &buff.front(), samps_to_send, md, uhd::io_type_t::COMPLEX_FLOAT32, uhd::device::SEND_MODE_FULL_BUFF, @@ -110,6 +110,9 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ if(verbose) std::cout << std::endl << boost::format("Sent %d samples") % num_tx_samps << std::endl; } + //ensure that the buffers have flushed out to the device before deconstruction + boost::this_thread::sleep(boost::posix_time::seconds(1)); + //finished std::cout << std::endl << "Done!" << std::endl << std::endl; diff --git a/host/examples/tx_waveforms.cpp b/host/examples/tx_waveforms.cpp index 553d6739d..dd18d3174 100644 --- a/host/examples/tx_waveforms.cpp +++ b/host/examples/tx_waveforms.cpp @@ -18,7 +18,7 @@ #include <uhd/utils/thread_priority.hpp> #include <uhd/utils/safe_main.hpp> #include <uhd/utils/static.hpp> -#include <uhd/usrp/single_usrp.hpp> +#include <uhd/usrp/multi_usrp.hpp> #include <boost/program_options.hpp> #include <boost/thread/thread_time.hpp> //system time #include <boost/math/special_functions/round.hpp> @@ -93,35 +93,34 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //create a usrp device std::cout << std::endl; std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; - uhd::usrp::single_usrp::sptr sdev = uhd::usrp::single_usrp::make(args); - uhd::device::sptr dev = sdev->get_device(); - std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; //set the tx sample rate std::cout << boost::format("Setting TX Rate: %f Msps...") % (rate/1e6) << std::endl; - sdev->set_tx_rate(rate); - std::cout << boost::format("Actual TX Rate: %f Msps...") % (sdev->get_tx_rate()/1e6) << std::endl << std::endl; + usrp->set_tx_rate(rate); + std::cout << boost::format("Actual TX Rate: %f Msps...") % (usrp->get_tx_rate()/1e6) << std::endl << std::endl; //set the tx center frequency std::cout << boost::format("Setting TX Freq: %f Mhz...") % (freq/1e6) << std::endl; - sdev->set_tx_freq(freq); - std::cout << boost::format("Actual TX Freq: %f Mhz...") % (sdev->get_tx_freq()/1e6) << std::endl << std::endl; + usrp->set_tx_freq(freq); + std::cout << boost::format("Actual TX Freq: %f Mhz...") % (usrp->get_tx_freq()/1e6) << std::endl << std::endl; //set the tx rf gain std::cout << boost::format("Setting TX Gain: %f dB...") % gain << std::endl; - sdev->set_tx_gain(gain); - std::cout << boost::format("Actual TX Gain: %f dB...") % sdev->get_tx_gain() << std::endl << std::endl; + usrp->set_tx_gain(gain); + std::cout << boost::format("Actual TX Gain: %f dB...") % usrp->get_tx_gain() << std::endl << std::endl; //for the const wave, set the wave freq for small samples per period if (wave_freq == 0 and wave_type == "CONST"){ - wave_freq = sdev->get_tx_rate()/2; + wave_freq = usrp->get_tx_rate()/2; } //error when the waveform is not possible to generate - if (std::abs(wave_freq) > sdev->get_tx_rate()/2){ + if (std::abs(wave_freq) > usrp->get_tx_rate()/2){ throw std::runtime_error("wave freq out of Nyquist zone"); } - if (sdev->get_tx_rate()/std::abs(wave_freq) > sine_table_len/2 and wave_type == "SINE"){ + if (usrp->get_tx_rate()/std::abs(wave_freq) > sine_table_len/2 and wave_type == "SINE"){ throw std::runtime_error("sine freq too small for table"); } @@ -135,7 +134,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //allocate the buffer and precalculate values std::vector<std::complex<float> > buff(spb); - const float cps = float(wave_freq/sdev->get_tx_rate()); + const float cps = float(wave_freq/usrp->get_tx_rate()); const float i_off = (wave_freq > 0)? float(0.25) : 0; const float q_off = (wave_freq < 0)? float(0.25) : 0; float theta = 0; @@ -162,7 +161,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ theta = std::fmod(theta, 1); //send the entire contents of the buffer - dev->send( + usrp->get_device()->send( &buff.front(), buff.size(), md, uhd::io_type_t::COMPLEX_FLOAT32, uhd::device::SEND_MODE_FULL_BUFF @@ -172,7 +171,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //send a mini EOB packet md.start_of_burst = false; md.end_of_burst = true; - dev->send(NULL, 0, md, + usrp->get_device()->send(NULL, 0, md, uhd::io_type_t::COMPLEX_FLOAT32, uhd::device::SEND_MODE_FULL_BUFF ); diff --git a/host/include/uhd/types/io_type.hpp b/host/include/uhd/types/io_type.hpp index 5176374d6..ec1b9c056 100644 --- a/host/include/uhd/types/io_type.hpp +++ b/host/include/uhd/types/io_type.hpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -33,9 +33,13 @@ namespace uhd{ * Built in IO types known to the system. */ enum tid_t{ + //! Custom type (technically unsupported by implementation) CUSTOM_TYPE = '?', + //! Complex floating point (32-bit floats) range [-1.0, +1.0] COMPLEX_FLOAT32 = 'f', + //! Complex signed integer (16-bit integers) range [-32768, +32767] COMPLEX_INT16 = 's', + //! Complex signed integer (8-bit integers) range [-128, 127] COMPLEX_INT8 = 'b' }; diff --git a/host/include/uhd/usrp/mboard_props.hpp b/host/include/uhd/usrp/mboard_props.hpp index c82bfc21a..d04ad012c 100644 --- a/host/include/uhd/usrp/mboard_props.hpp +++ b/host/include/uhd/usrp/mboard_props.hpp @@ -31,6 +31,7 @@ namespace uhd{ namespace usrp{ enum mboard_prop_t{ MBOARD_PROP_NAME = 'n', //ro, std::string MBOARD_PROP_OTHERS = 'o', //ro, prop_names_t + MBOARD_PROP_CLOCK_RATE = 'c', //rw, double MBOARD_PROP_RX_DSP = 'd', //ro, wax::obj MBOARD_PROP_RX_DSP_NAMES = 'D', //ro, prop_names_t MBOARD_PROP_TX_DSP = 'u', //ro, wax::obj diff --git a/host/include/uhd/usrp/multi_usrp.hpp b/host/include/uhd/usrp/multi_usrp.hpp index b603d4324..c77b5d6d2 100644 --- a/host/include/uhd/usrp/multi_usrp.hpp +++ b/host/include/uhd/usrp/multi_usrp.hpp @@ -34,19 +34,30 @@ namespace uhd{ namespace usrp{ /*! - * The multi-USRP device class: - * A multi-USRP facilitates ease-of-use for multiple USRP scenarios. - * The wrapper provides convenience functions to control the group - * of underlying devices as if they consisted of a single device. + * The Multi-USRP device class: * - * A few notes about a multi-USRP configuration: + * This class facilitates ease-of-use for most use-case scenarios. + * The wrapper provides convenience functions to tune the devices, + * set the dboard gains, antennas, filters, and other properties. + * This class can be used to interface with a single USRP with + * one or more channels, or multiple USRPs in a homogeneous setup. + * All members take an optional parameter for board number or channel number. + * In the single device, single channel case, these parameters can be unspecified. + * + * When using a single device with multiple channels: + * - Channel mapping is determined by the subdevice specifications + * - All channels share a common RX sample rate + * - All channels share a common TX sample rate + * + * When using multiple devices in a configuration: + * - Channel mapping is determined by the device address arguments * - All boards share a common RX sample rate * - All boards share a common TX sample rate * - All boards share a common RX subdevice specification size * - All boards share a common TX subdevice specification size * - All boards must have synchronized times (see the set_time_*() calls) * - * Example to setup channel mapping: + * Example to setup channel mapping for multiple devices: * <pre> * * //create a multi_usrp with two boards in the configuration @@ -95,6 +106,26 @@ public: /******************************************************************* * Mboard methods ******************************************************************/ + + /*! + * Set the master clock rate. + * This controls the rate of the clock that feeds the FPGA DSP. + * On some devices, this re-tunes the clock to the specified rate. + * If the specified rate is not available, this method will throw. + * On other devices, this method notifies the software of the rate, + * but requires the the user has made the necessary hardware change. + * \param rate the new master clock rate in Hz + * \param mboard the motherboard index 0 to M-1 + */ + virtual void set_master_clock_rate(double rate, size_t mboard = ALL_MBOARDS) = 0; + + /*! + * Get the master clock rate. + * \param mboard the motherboard index 0 to M-1 + * \return the master clock rate in Hz. + */ + virtual double get_master_clock_rate(size_t mboard = 0) = 0; + /*! * Get a printable summary for this USRP configuration. * \return a printable string @@ -106,7 +137,7 @@ public: * \param mboard which motherboard to query * \return a string representing the name */ - virtual std::string get_mboard_name(size_t mboard) = 0; + virtual std::string get_mboard_name(size_t mboard = 0) = 0; /*! * Get the current time in the usrp time registers. @@ -121,6 +152,19 @@ public: virtual time_spec_t get_time_last_pps(void) = 0; /*! + * Sets the time registers on the usrp immediately. + * + * If only one MIMO master is present in your configuration, set_time_now is + * safe to use because the slave's time automatically follows the master's time. + * Otherwise, this call cannot set the time synchronously across multiple devices. + * Please use the set_time_next_pps or set_time_unknown_pps calls with a PPS signal. + * + * \param time_spec the time to latch into the usrp device + * \param mboard the motherboard index 0 to M-1 + */ + virtual void set_time_now(const time_spec_t &time_spec, size_t mboard = ALL_MBOARDS) = 0; + + /*! * Set the time registers on the usrp at the next pps tick. * The values will not be latched in until the pulse occurs. * It is recommended that the user sleep(1) after calling to ensure @@ -162,6 +206,11 @@ public: * Issue a stream command to the usrp device. * This tells the usrp to send samples into the host. * See the documentation for stream_cmd_t for more info. + * + * With multiple devices, the first stream command in a chain of commands + * should have a time spec in the near future and stream_now = false; + * to ensure that the packets can be aligned by their time specs. + * * \param stream_cmd the stream command to issue */ virtual void issue_stream_cmd(const stream_cmd_t &stream_cmd) = 0; @@ -173,7 +222,7 @@ public: * \param clock_config the clock configuration to set * \param mboard which motherboard to set the config */ - virtual void set_clock_config(const clock_config_t &clock_config, size_t mboard) = 0; + virtual void set_clock_config(const clock_config_t &clock_config, size_t mboard = ALL_MBOARDS) = 0; /*! * Get the number of USRP motherboards in this configuration. @@ -191,14 +240,14 @@ public: * \param spec the new subdevice specification * \param mboard the motherboard index 0 to M-1 */ - virtual void set_rx_subdev_spec(const uhd::usrp::subdev_spec_t &spec, size_t mboard) = 0; + virtual void set_rx_subdev_spec(const uhd::usrp::subdev_spec_t &spec, size_t mboard = ALL_MBOARDS) = 0; /*! * Get the RX subdevice specification. * \param mboard the motherboard index 0 to M-1 * \return the subdevice specification in use */ - virtual uhd::usrp::subdev_spec_t get_rx_subdev_spec(size_t mboard) = 0; + virtual uhd::usrp::subdev_spec_t get_rx_subdev_spec(size_t mboard = 0) = 0; /*! * Get the number of RX channels in this configuration. @@ -212,7 +261,7 @@ public: * \param chan the channel index 0 to N-1 * \return the subdevice name */ - virtual std::string get_rx_subdev_name(size_t chan) = 0; + virtual std::string get_rx_subdev_name(size_t chan = 0) = 0; /*! * Set the RX sample rate across all channels. @@ -241,14 +290,14 @@ public: * \param chan the channel index 0 to N-1 * \return the frequency in Hz */ - virtual double get_rx_freq(size_t chan) = 0; + virtual double get_rx_freq(size_t chan = 0) = 0; /*! * Get the RX center frequency range. * \param chan the channel index 0 to N-1 * \return a frequency range object */ - virtual freq_range_t get_rx_freq_range(size_t chan) = 0; + virtual freq_range_t get_rx_freq_range(size_t chan = 0) = 0; /*! * Set the RX gain value for the specified gain element. @@ -257,10 +306,10 @@ public: * \param name the name of the gain element * \param chan the channel index 0 to N-1 */ - virtual void set_rx_gain(double gain, const std::string &name, size_t chan) = 0; + virtual void set_rx_gain(double gain, const std::string &name, size_t chan = 0) = 0; //! A convenience wrapper for setting overall RX gain - void set_rx_gain(double gain, size_t chan){ + void set_rx_gain(double gain, size_t chan = 0){ return this->set_rx_gain(gain, ALL_GAINS, chan); } @@ -271,10 +320,10 @@ public: * \param chan the channel index 0 to N-1 * \return the gain in dB */ - virtual double get_rx_gain(const std::string &name, size_t chan) = 0; + virtual double get_rx_gain(const std::string &name, size_t chan = 0) = 0; //! A convenience wrapper for getting overall RX gain - double get_rx_gain(size_t chan){ + double get_rx_gain(size_t chan = 0){ return this->get_rx_gain(ALL_GAINS, chan); } @@ -285,10 +334,10 @@ public: * \param chan the channel index 0 to N-1 * \return a gain range object */ - virtual gain_range_t get_rx_gain_range(const std::string &name, size_t chan) = 0; + virtual gain_range_t get_rx_gain_range(const std::string &name, size_t chan = 0) = 0; //! A convenience wrapper for getting overall RX gain range - gain_range_t get_rx_gain_range(size_t chan){ + gain_range_t get_rx_gain_range(size_t chan = 0){ return this->get_rx_gain_range(ALL_GAINS, chan); } @@ -298,49 +347,49 @@ public: * \param chan the channel index 0 to N-1 * \return a vector of gain element names */ - virtual std::vector<std::string> get_rx_gain_names(size_t chan) = 0; + virtual std::vector<std::string> get_rx_gain_names(size_t chan = 0) = 0; /*! * Select the RX antenna on the subdevice. * \param ant the antenna name * \param chan the channel index 0 to N-1 */ - virtual void set_rx_antenna(const std::string &ant, size_t chan) = 0; + virtual void set_rx_antenna(const std::string &ant, size_t chan = 0) = 0; /*! * Get the selected RX antenna on the subdevice. * \param chan the channel index 0 to N-1 * \return the antenna name */ - virtual std::string get_rx_antenna(size_t chan) = 0; + virtual std::string get_rx_antenna(size_t chan = 0) = 0; /*! * Get a list of possible RX antennas on the subdevice. * \param chan the channel index 0 to N-1 * \return a vector of antenna names */ - virtual std::vector<std::string> get_rx_antennas(size_t chan) = 0; + virtual std::vector<std::string> get_rx_antennas(size_t chan = 0) = 0; /*! * Get the locked status of the LO on the subdevice. * \param chan the channel index 0 to N-1 * \return true for locked */ - virtual bool get_rx_lo_locked(size_t chan) = 0; + virtual bool get_rx_lo_locked(size_t chan = 0) = 0; /*! * Set the RX bandwidth on the subdevice. * \param bandwidth the bandwidth in Hz * \param chan the channel index 0 to N-1 */ - virtual void set_rx_bandwidth(double bandwidth, size_t chan) = 0; + virtual void set_rx_bandwidth(double bandwidth, size_t chan = 0) = 0; /*! * Get the RX bandwidth on the subdevice. * \param chan the channel index 0 to N-1 * \return the bandwidth in Hz */ - virtual double get_rx_bandwidth(size_t chan) = 0; + virtual double get_rx_bandwidth(size_t chan = 0) = 0; /*! * Read the RSSI value on the RX subdevice. @@ -348,7 +397,7 @@ public: * \return the rssi in dB * \throw exception if RSSI readback not supported */ - virtual double read_rssi(size_t chan) = 0; + virtual double read_rssi(size_t chan = 0) = 0; /*! * Get the dboard interface object for the RX subdevice. @@ -357,7 +406,7 @@ public: * \param chan the channel index 0 to N-1 * \return the dboard interface sptr */ - virtual dboard_iface::sptr get_rx_dboard_iface(size_t chan) = 0; + virtual dboard_iface::sptr get_rx_dboard_iface(size_t chan = 0) = 0; /******************************************************************* * TX methods @@ -370,14 +419,14 @@ public: * \param spec the new subdevice specification * \param mboard the motherboard index 0 to M-1 */ - virtual void set_tx_subdev_spec(const uhd::usrp::subdev_spec_t &spec, size_t mboard) = 0; + virtual void set_tx_subdev_spec(const uhd::usrp::subdev_spec_t &spec, size_t mboard = ALL_MBOARDS) = 0; /*! * Get the TX subdevice specification. * \param mboard the motherboard index 0 to M-1 * \return the subdevice specification in use */ - virtual uhd::usrp::subdev_spec_t get_tx_subdev_spec(size_t mboard) = 0; + virtual uhd::usrp::subdev_spec_t get_tx_subdev_spec(size_t mboard = 0) = 0; /*! * Get the number of TX channels in this configuration. @@ -391,7 +440,7 @@ public: * \param chan the channel index 0 to N-1 * \return the subdevice name */ - virtual std::string get_tx_subdev_name(size_t chan) = 0; + virtual std::string get_tx_subdev_name(size_t chan = 0) = 0; /*! * Set the TX sample rate across all channels. @@ -420,14 +469,14 @@ public: * \param chan the channel index 0 to N-1 * \return the frequency in Hz */ - virtual double get_tx_freq(size_t chan) = 0; + virtual double get_tx_freq(size_t chan = 0) = 0; /*! * Get the TX center frequency range. * \param chan the channel index 0 to N-1 * \return a frequency range object */ - virtual freq_range_t get_tx_freq_range(size_t chan) = 0; + virtual freq_range_t get_tx_freq_range(size_t chan = 0) = 0; /*! * Set the TX gain value for the specified gain element. @@ -436,10 +485,10 @@ public: * \param name the name of the gain element * \param chan the channel index 0 to N-1 */ - virtual void set_tx_gain(double gain, const std::string &name, size_t chan) = 0; + virtual void set_tx_gain(double gain, const std::string &name, size_t chan = 0) = 0; //! A convenience wrapper for setting overall TX gain - void set_tx_gain(double gain, size_t chan){ + void set_tx_gain(double gain, size_t chan = 0){ return this->set_tx_gain(gain, ALL_GAINS, chan); } @@ -450,10 +499,10 @@ public: * \param chan the channel index 0 to N-1 * \return the gain in dB */ - virtual double get_tx_gain(const std::string &name, size_t chan) = 0; + virtual double get_tx_gain(const std::string &name, size_t chan = 0) = 0; //! A convenience wrapper for getting overall TX gain - double get_tx_gain(size_t chan){ + double get_tx_gain(size_t chan = 0){ return this->get_tx_gain(ALL_GAINS, chan); } @@ -464,10 +513,10 @@ public: * \param chan the channel index 0 to N-1 * \return a gain range object */ - virtual gain_range_t get_tx_gain_range(const std::string &name, size_t chan) = 0; + virtual gain_range_t get_tx_gain_range(const std::string &name, size_t chan = 0) = 0; //! A convenience wrapper for getting overall TX gain range - gain_range_t get_tx_gain_range(size_t chan){ + gain_range_t get_tx_gain_range(size_t chan = 0){ return this->get_tx_gain_range(ALL_GAINS, chan); } @@ -477,49 +526,49 @@ public: * \param chan the channel index 0 to N-1 * \return a vector of gain element names */ - virtual std::vector<std::string> get_tx_gain_names(size_t chan) = 0; + virtual std::vector<std::string> get_tx_gain_names(size_t chan = 0) = 0; /*! * Select the TX antenna on the subdevice. * \param ant the antenna name * \param chan the channel index 0 to N-1 */ - virtual void set_tx_antenna(const std::string &ant, size_t chan) = 0; + virtual void set_tx_antenna(const std::string &ant, size_t chan = 0) = 0; /*! * Get the selected TX antenna on the subdevice. * \param chan the channel index 0 to N-1 * \return the antenna name */ - virtual std::string get_tx_antenna(size_t chan) = 0; + virtual std::string get_tx_antenna(size_t chan = 0) = 0; /*! * Get a list of possible TX antennas on the subdevice. * \param chan the channel index 0 to N-1 * \return a vector of antenna names */ - virtual std::vector<std::string> get_tx_antennas(size_t chan) = 0; + virtual std::vector<std::string> get_tx_antennas(size_t chan = 0) = 0; /*! * Get the locked status of the LO on the subdevice. * \param chan the channel index 0 to N-1 * \return true for locked */ - virtual bool get_tx_lo_locked(size_t chan) = 0; + virtual bool get_tx_lo_locked(size_t chan = 0) = 0; /*! * Set the TX bandwidth on the subdevice. * \param bandwidth the bandwidth in Hz * \param chan the channel index 0 to N-1 */ - virtual void set_tx_bandwidth(double bandwidth, size_t chan) = 0; + virtual void set_tx_bandwidth(double bandwidth, size_t chan = 0) = 0; /*! * Get the TX bandwidth on the subdevice. * \param chan the channel index 0 to N-1 * \return the bandwidth in Hz */ - virtual double get_tx_bandwidth(size_t chan) = 0; + virtual double get_tx_bandwidth(size_t chan = 0) = 0; /*! * Get the dboard interface object for the TX subdevice. @@ -528,7 +577,7 @@ public: * \param chan the channel index 0 to N-1 * \return the dboard interface sptr */ - virtual dboard_iface::sptr get_tx_dboard_iface(size_t chan) = 0; + virtual dboard_iface::sptr get_tx_dboard_iface(size_t chan = 0) = 0; }; }} diff --git a/host/include/uhd/usrp/single_usrp.hpp b/host/include/uhd/usrp/single_usrp.hpp index d80999300..0520db162 100644 --- a/host/include/uhd/usrp/single_usrp.hpp +++ b/host/include/uhd/usrp/single_usrp.hpp @@ -18,441 +18,12 @@ #ifndef INCLUDED_UHD_USRP_SINGLE_USRP_HPP #define INCLUDED_UHD_USRP_SINGLE_USRP_HPP -#include <uhd/config.hpp> -#include <uhd/device.hpp> -#include <uhd/types/ranges.hpp> -#include <uhd/types/stream_cmd.hpp> -#include <uhd/types/clock_config.hpp> -#include <uhd/types/tune_request.hpp> -#include <uhd/types/tune_result.hpp> -#include <uhd/usrp/subdev_spec.hpp> -#include <uhd/usrp/dboard_iface.hpp> -#include <boost/shared_ptr.hpp> -#include <boost/utility.hpp> -#include <vector> +#include <uhd/usrp/multi_usrp.hpp> namespace uhd{ namespace usrp{ -/*! - * The single-USRP device class: - * A single-USRP facilitates ease-of-use for most use-case scenarios. - * The wrapper provides convenience functions to tune the devices - * as well as to set the dboard gains, antennas, and other properties. - * This wrapper supports multi-channel configurations per motherboard. - */ -class UHD_API single_usrp : boost::noncopyable{ -public: - typedef boost::shared_ptr<single_usrp> sptr; - - //! A wildcard gain element name - static const std::string ALL_GAINS; - - /*! - * Make a new single usrp from the device address. - * \param dev_addr the device address - * \return a new single usrp object - */ - static sptr make(const device_addr_t &dev_addr); - - /*! - * Get the underlying device object. - * This is needed to get access to the streaming API and properties. - * \return the device object within this single usrp - */ - virtual device::sptr get_device(void) = 0; - - /******************************************************************* - * Mboard methods - ******************************************************************/ - /*! - * Get a printable summary for this USRP configuration. - * \return a printable string - */ - virtual std::string get_pp_string(void) = 0; - - /*! - * Get canonical name for this USRP motherboard. - * \return a string representing the name - */ - virtual std::string get_mboard_name(void) = 0; - - /*! - * Get the current time in the usrp time registers. - * \return a timespec representing current usrp time - */ - virtual time_spec_t get_time_now(void) = 0; - - /*! - * Get the time when the last pps pulse occured. - * \return a timespec representing the last pps - */ - virtual time_spec_t get_time_last_pps(void) = 0; - - /*! - * Sets the time registers on the usrp immediately. - * \param time_spec the time to latch into the usrp device - */ - virtual void set_time_now(const time_spec_t &time_spec) = 0; - - /*! - * Set the time registers on the usrp at the next pps tick. - * The values will not be latched in until the pulse occurs. - * It is recommended that the user sleep(1) after calling to ensure - * that the time registers will be in a known state prior to use. - * - * Note: Because this call sets the time on the "next" pps, - * the seconds in the time spec should be current seconds + 1. - * - * \param time_spec the time to latch into the usrp device - */ - virtual void set_time_next_pps(const time_spec_t &time_spec) = 0; - - /*! - * Issue a stream command to the usrp device. - * This tells the usrp to send samples into the host. - * See the documentation for stream_cmd_t for more info. - * \param stream_cmd the stream command to issue - */ - virtual void issue_stream_cmd(const stream_cmd_t &stream_cmd) = 0; - - /*! - * Set the clock configuration for the usrp device. - * This tells the usrp how to get a 10Mhz reference and PPS clock. - * See the documentation for clock_config_t for more info. - * \param clock_config the clock configuration to set - */ - virtual void set_clock_config(const clock_config_t &clock_config) = 0; - - /******************************************************************* - * RX methods - ******************************************************************/ - /*! - * Set the RX subdevice specification: - * The subdev spec maps a physical part of a daughter-board to a channel number. - * Set the subdev spec before calling into any methods with a channel number. - * \param spec the new subdevice specification - */ - virtual void set_rx_subdev_spec(const uhd::usrp::subdev_spec_t &spec) = 0; - - /*! - * Get the RX subdevice specification. - * \return the subdevice specification in use - */ - virtual uhd::usrp::subdev_spec_t get_rx_subdev_spec(void) = 0; - - /*! - * Get the name of the RX subdevice. - * \param chan the channel index 0 to N-1 - * \return the subdevice name - */ - virtual std::string get_rx_subdev_name(size_t chan = 0) = 0; - - /*! - * Set the RX sample rate across all channels. - * \param rate the rate in Sps - */ - virtual void set_rx_rate(double rate) = 0; - - /*! - * Gets the RX sample rate for all channels. - * \return the rate in Sps - */ - virtual double get_rx_rate(void) = 0; - - /*! - * Set the RX center frequency. - * \param tune_request tune request instructions - * \param chan the channel index 0 to N-1 - * \return a tune result object - */ - virtual tune_result_t set_rx_freq( - const tune_request_t &tune_request, size_t chan = 0 - ) = 0; - - /*! - * Get the RX center frequency. - * \param chan the channel index 0 to N-1 - * \return the frequency in Hz - */ - virtual double get_rx_freq(size_t chan = 0) = 0; - - /*! - * Get the RX center frequency range. - * \param chan the channel index 0 to N-1 - * \return a frequency range object - */ - virtual freq_range_t get_rx_freq_range(size_t chan = 0) = 0; - - /*! - * Set the RX gain value for the specified gain element. - * For an empty name, distribute across all gain elements. - * \param gain the gain in dB - * \param name the name of the gain element - * \param chan the channel index 0 to N-1 - */ - virtual void set_rx_gain(double gain, const std::string &name, size_t chan = 0) = 0; - - //! A convenience wrapper for setting overall RX gain - void set_rx_gain(double gain, size_t chan = 0){ - return this->set_rx_gain(gain, ALL_GAINS, chan); - } - - /*! - * Get the RX gain value for the specified gain element. - * For an empty name, sum across all gain elements. - * \param name the name of the gain element - * \param chan the channel index 0 to N-1 - * \return the gain in dB - */ - virtual double get_rx_gain(const std::string &name, size_t chan = 0) = 0; - - //! A convenience wrapper for getting overall RX gain - double get_rx_gain(size_t chan = 0){ - return this->get_rx_gain(ALL_GAINS, chan); - } - - /*! - * Get the RX gain range for the specified gain element. - * For an empty name, calculate the overall gain range. - * \param name the name of the gain element - * \param chan the channel index 0 to N-1 - * \return a gain range object - */ - virtual gain_range_t get_rx_gain_range(const std::string &name, size_t chan = 0) = 0; - - //! A convenience wrapper for getting overall RX gain range - gain_range_t get_rx_gain_range(size_t chan = 0){ - return this->get_rx_gain_range(ALL_GAINS, chan); - } - - /*! - * Get the names of the gain elements in the RX chain. - * Gain elements are ordered from antenna to FPGA. - * \param chan the channel index 0 to N-1 - * \return a vector of gain element names - */ - virtual std::vector<std::string> get_rx_gain_names(size_t chan = 0) = 0; - - /*! - * Select the RX antenna on the subdevice. - * \param ant the antenna name - * \param chan the channel index 0 to N-1 - */ - virtual void set_rx_antenna(const std::string &ant, size_t chan = 0) = 0; - - /*! - * Get the selected RX antenna on the subdevice. - * \param chan the channel index 0 to N-1 - * \return the antenna name - */ - virtual std::string get_rx_antenna(size_t chan = 0) = 0; - - /*! - * Get a list of possible RX antennas on the subdevice. - * \param chan the channel index 0 to N-1 - * \return a vector of antenna names - */ - virtual std::vector<std::string> get_rx_antennas(size_t chan = 0) = 0; - - /*! - * Get the locked status of the LO on the subdevice. - * \param chan the channel index 0 to N-1 - * \return true for locked - */ - virtual bool get_rx_lo_locked(size_t chan = 0) = 0; - - /*! - * Set the RX bandwidth on the subdevice. - * \param bandwidth the bandwidth in Hz - * \param chan the channel index 0 to N-1 - */ - virtual void set_rx_bandwidth(double bandwidth, size_t chan = 0) = 0; - - /*! - * Get the RX bandwidth on the subdevice. - * \param chan the channel index 0 to N-1 - * \return the bandwidth in Hz - */ - virtual double get_rx_bandwidth(size_t chan = 0) = 0; - - /*! - * Read the RSSI value on the RX subdevice. - * \param chan the channel index 0 to N-1 - * \return the rssi in dB - * \throw exception if RSSI readback not supported - */ - virtual double read_rssi(size_t chan = 0) = 0; - - /*! - * Get the dboard interface object for the RX subdevice. - * The dboard interface gives access to GPIOs, SPI, I2C, low-speed ADC and DAC. - * Use at your own risk! - * \param chan the channel index 0 to N-1 - * \return the dboard interface sptr - */ - virtual dboard_iface::sptr get_rx_dboard_iface(size_t chan = 0) = 0; - - /******************************************************************* - * TX methods - ******************************************************************/ - /*! - * Set the TX subdevice specification: - * The subdev spec maps a physical part of a daughter-board to a channel number. - * Set the subdev spec before calling into any methods with a channel number. - * \param spec the new subdevice specification - */ - virtual void set_tx_subdev_spec(const uhd::usrp::subdev_spec_t &spec) = 0; - - /*! - * Get the TX subdevice specification. - * \return the subdevice specification in use - */ - virtual uhd::usrp::subdev_spec_t get_tx_subdev_spec(void) = 0; - - /*! - * Get the name of the TX subdevice. - * \param chan the channel index 0 to N-1 - * \return the subdevice name - */ - virtual std::string get_tx_subdev_name(size_t chan = 0) = 0; - - /*! - * Set the TX sample rate across all channels. - * \param rate the rate in Sps - */ - virtual void set_tx_rate(double rate) = 0; - - /*! - * Gets the TX sample rate for all channels. - * \return the rate in Sps - */ - virtual double get_tx_rate(void) = 0; - - /*! - * Set the TX center frequency. - * \param tune_request tune request instructions - * \param chan the channel index 0 to N-1 - * \return a tune result object - */ - virtual tune_result_t set_tx_freq( - const tune_request_t &tune_request, size_t chan = 0 - ) = 0; - - /*! - * Get the TX center frequency. - * \param chan the channel index 0 to N-1 - * \return the frequency in Hz - */ - virtual double get_tx_freq(size_t chan = 0) = 0; - - /*! - * Get the TX center frequency range. - * \param chan the channel index 0 to N-1 - * \return a frequency range object - */ - virtual freq_range_t get_tx_freq_range(size_t chan = 0) = 0; - - /*! - * Set the TX gain value for the specified gain element. - * For an empty name, distribute across all gain elements. - * \param gain the gain in dB - * \param name the name of the gain element - * \param chan the channel index 0 to N-1 - */ - virtual void set_tx_gain(double gain, const std::string &name, size_t chan = 0) = 0; - - //! A convenience wrapper for setting overall TX gain - void set_tx_gain(double gain, size_t chan = 0){ - return this->set_tx_gain(gain, ALL_GAINS, chan); - } - - /*! - * Get the TX gain value for the specified gain element. - * For an empty name, sum across all gain elements. - * \param name the name of the gain element - * \param chan the channel index 0 to N-1 - * \return the gain in dB - */ - virtual double get_tx_gain(const std::string &name, size_t chan = 0) = 0; - - //! A convenience wrapper for getting overall TX gain - double get_tx_gain(size_t chan = 0){ - return this->get_tx_gain(ALL_GAINS, chan); - } - - /*! - * Get the TX gain range for the specified gain element. - * For an empty name, calculate the overall gain range. - * \param name the name of the gain element - * \param chan the channel index 0 to N-1 - * \return a gain range object - */ - virtual gain_range_t get_tx_gain_range(const std::string &name, size_t chan = 0) = 0; - - //! A convenience wrapper for getting overall TX gain range - gain_range_t get_tx_gain_range(size_t chan = 0){ - return this->get_tx_gain_range(ALL_GAINS, chan); - } - - /*! - * Get the names of the gain elements in the TX chain. - * Gain elements are ordered from antenna to FPGA. - * \param chan the channel index 0 to N-1 - * \return a vector of gain element names - */ - virtual std::vector<std::string> get_tx_gain_names(size_t chan = 0) = 0; - - /*! - * Select the TX antenna on the subdevice. - * \param ant the antenna name - * \param chan the channel index 0 to N-1 - */ - virtual void set_tx_antenna(const std::string &ant, size_t chan = 0) = 0; - - /*! - * Get the selected TX antenna on the subdevice. - * \param chan the channel index 0 to N-1 - * \return the antenna name - */ - virtual std::string get_tx_antenna(size_t chan = 0) = 0; - - /*! - * Get a list of possible TX antennas on the subdevice. - * \param chan the channel index 0 to N-1 - * \return a vector of antenna names - */ - virtual std::vector<std::string> get_tx_antennas(size_t chan = 0) = 0; - - /*! - * Get the locked status of the LO on the subdevice. - * \param chan the channel index 0 to N-1 - * \return true for locked - */ - virtual bool get_tx_lo_locked(size_t chan = 0) = 0; - - /*! - * Set the TX bandwidth on the subdevice. - * \param bandwidth the bandwidth in Hz - * \param chan the channel index 0 to N-1 - */ - virtual void set_tx_bandwidth(double bandwidth, size_t chan = 0) = 0; - - /*! - * Get the TX bandwidth on the subdevice. - * \param chan the channel index 0 to N-1 - * \return the bandwidth in Hz - */ - virtual double get_tx_bandwidth(size_t chan = 0) = 0; - - /*! - * Get the dboard interface object for the TX subdevice. - * The dboard interface gives access to GPIOs, SPI, I2C, low-speed ADC and DAC. - * Use at your own risk! - * \param chan the channel index 0 to N-1 - * \return the dboard interface sptr - */ - virtual dboard_iface::sptr get_tx_dboard_iface(size_t chan = 0) = 0; -}; + //! Multi-USRP is a superset of Single-USRP + typedef multi_usrp single_usrp; }} diff --git a/host/lib/usrp/CMakeLists.txt b/host/lib/usrp/CMakeLists.txt index bd25aec2b..97a54a798 100644 --- a/host/lib/usrp/CMakeLists.txt +++ b/host/lib/usrp/CMakeLists.txt @@ -29,7 +29,6 @@ LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/mboard_eeprom.cpp ${CMAKE_CURRENT_SOURCE_DIR}/misc_utils.cpp ${CMAKE_CURRENT_SOURCE_DIR}/multi_usrp.cpp - ${CMAKE_CURRENT_SOURCE_DIR}/single_usrp.cpp ${CMAKE_CURRENT_SOURCE_DIR}/subdev_spec.cpp ${CMAKE_CURRENT_SOURCE_DIR}/tune_helper.cpp ${CMAKE_CURRENT_SOURCE_DIR}/wrapper_utils.hpp diff --git a/host/lib/usrp/multi_usrp.cpp b/host/lib/usrp/multi_usrp.cpp index 48eec28c1..817d7b085 100644 --- a/host/lib/usrp/multi_usrp.cpp +++ b/host/lib/usrp/multi_usrp.cpp @@ -53,11 +53,26 @@ public: /******************************************************************* * Mboard methods ******************************************************************/ + void set_master_clock_rate(double rate, size_t mboard){ + if (mboard != ALL_MBOARDS){ + _mboard(mboard)[MBOARD_PROP_CLOCK_RATE] = rate; + return; + } + for (size_t m = 0; m < get_num_mboards(); m++){ + set_master_clock_rate(rate, m); + } + } + + double get_master_clock_rate(size_t mboard){ + return _mboard(mboard)[MBOARD_PROP_CLOCK_RATE].as<double>(); + } + std::string get_pp_string(void){ std::string buff = str(boost::format( - "Multi USRP:\n" + "%s USRP:\n" " Device: %s\n" ) + % ((get_num_mboards() > 1)? "Multi" : "Single") % (*_dev)[DEVICE_PROP_NAME].as<std::string>() ); for (size_t m = 0; m < get_num_mboards(); m++){ @@ -121,6 +136,16 @@ public: return _mboard(0)[MBOARD_PROP_TIME_PPS].as<time_spec_t>(); } + void set_time_now(const time_spec_t &time_spec, size_t mboard){ + if (mboard != ALL_MBOARDS){ + _mboard(mboard)[MBOARD_PROP_TIME_NOW] = time_spec; + return; + } + for (size_t m = 0; m < get_num_mboards(); m++){ + set_time_now(time_spec, m); + } + } + void set_time_next_pps(const time_spec_t &time_spec){ for (size_t m = 0; m < get_num_mboards(); m++){ _mboard(m)[MBOARD_PROP_TIME_PPS] = time_spec; diff --git a/host/lib/usrp/single_usrp.cpp b/host/lib/usrp/single_usrp.cpp deleted file mode 100644 index c37449c5f..000000000 --- a/host/lib/usrp/single_usrp.cpp +++ /dev/null @@ -1,339 +0,0 @@ -// -// Copyright 2010-2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#include "wrapper_utils.hpp" -#include <uhd/usrp/single_usrp.hpp> -#include <uhd/usrp/tune_helper.hpp> -#include <uhd/utils/assert.hpp> -#include <uhd/utils/gain_group.hpp> -#include <uhd/usrp/subdev_props.hpp> -#include <uhd/usrp/mboard_props.hpp> -#include <uhd/usrp/device_props.hpp> -#include <uhd/usrp/dboard_props.hpp> -#include <uhd/usrp/dsp_props.hpp> -#include <boost/foreach.hpp> -#include <boost/format.hpp> -#include <stdexcept> -#include <iostream> - -using namespace uhd; -using namespace uhd::usrp; - -const std::string single_usrp::ALL_GAINS = ""; - -/*********************************************************************** - * Simple USRP Implementation - **********************************************************************/ -class single_usrp_impl : public single_usrp{ -public: - single_usrp_impl(const device_addr_t &addr){ - _dev = device::make(addr); - } - - device::sptr get_device(void){ - return _dev; - } - - /******************************************************************* - * Mboard methods - ******************************************************************/ - std::string get_pp_string(void){ - std::string buff = str(boost::format( - "Single USRP:\n" - " Device: %s\n" - " Mboard: %s\n" - ) - % (*_dev)[DEVICE_PROP_NAME].as<std::string>() - % _mboard()[MBOARD_PROP_NAME].as<std::string>() - ); - - //----------- rx side of life ---------------------------------- - buff += str(boost::format( - " RX DSP: %s\n" - ) - % _rx_dsp()[DSP_PROP_NAME].as<std::string>() - ); - for (size_t chan = 0; chan < this->get_rx_subdev_spec().size(); chan++){ - buff += str(boost::format( - " RX Channel: %u\n" - " RX Dboard: %s\n" - " RX Subdev: %s\n" - ) % chan - % _rx_dboard(chan)[DBOARD_PROP_NAME].as<std::string>() - % _rx_subdev(chan)[SUBDEV_PROP_NAME].as<std::string>() - ); - } - - //----------- tx side of life ---------------------------------- - buff += str(boost::format( - " TX DSP: %s\n" - ) - % _tx_dsp()[DSP_PROP_NAME].as<std::string>() - ); - for (size_t chan = 0; chan < this->get_tx_subdev_spec().size(); chan++){ - buff += str(boost::format( - " TX Channel: %u\n" - " TX Dboard: %s\n" - " TX Subdev: %s\n" - ) % chan - % _tx_dboard(chan)[DBOARD_PROP_NAME].as<std::string>() - % _tx_subdev(chan)[SUBDEV_PROP_NAME].as<std::string>() - ); - } - - return buff; - } - - std::string get_mboard_name(void){ - return _mboard()[MBOARD_PROP_NAME].as<std::string>(); - } - - time_spec_t get_time_now(void){ - return _mboard()[MBOARD_PROP_TIME_NOW].as<time_spec_t>(); - } - - time_spec_t get_time_last_pps(void){ - return _mboard()[MBOARD_PROP_TIME_PPS].as<time_spec_t>(); - } - - void set_time_now(const time_spec_t &time_spec){ - _mboard()[MBOARD_PROP_TIME_NOW] = time_spec; - } - - void set_time_next_pps(const time_spec_t &time_spec){ - _mboard()[MBOARD_PROP_TIME_PPS] = time_spec; - } - - void issue_stream_cmd(const stream_cmd_t &stream_cmd){ - _mboard()[MBOARD_PROP_STREAM_CMD] = stream_cmd; - } - - void set_clock_config(const clock_config_t &clock_config){ - _mboard()[MBOARD_PROP_CLOCK_CONFIG] = clock_config; - } - - /******************************************************************* - * RX methods - ******************************************************************/ - void set_rx_subdev_spec(const subdev_spec_t &spec){ - _mboard()[MBOARD_PROP_RX_SUBDEV_SPEC] = spec; - } - - subdev_spec_t get_rx_subdev_spec(void){ - return _mboard()[MBOARD_PROP_RX_SUBDEV_SPEC].as<subdev_spec_t>(); - } - - std::string get_rx_subdev_name(size_t chan){ - return _rx_subdev(chan)[SUBDEV_PROP_NAME].as<std::string>(); - } - - void set_rx_rate(double rate){ - _rx_dsp()[DSP_PROP_HOST_RATE] = rate; - do_samp_rate_warning_message(rate, get_rx_rate(), "RX"); - } - - double get_rx_rate(void){ - return _rx_dsp()[DSP_PROP_HOST_RATE].as<double>(); - } - - tune_result_t set_rx_freq(const tune_request_t &tune_request, size_t chan){ - tune_result_t r = tune_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(), chan, tune_request); - do_tune_freq_warning_message(tune_request.target_freq, get_rx_freq(chan), "RX"); - return r; - } - - double get_rx_freq(size_t chan){ - return derive_freq_from_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(), chan); - } - - freq_range_t get_rx_freq_range(size_t chan){ - return add_dsp_shift(_rx_subdev(chan)[SUBDEV_PROP_FREQ_RANGE].as<freq_range_t>(), _rx_dsp()); - } - - void set_rx_gain(double gain, const std::string &name, size_t chan){ - return _rx_gain_group(chan)->set_value(gain, name); - } - - double get_rx_gain(const std::string &name, size_t chan){ - return _rx_gain_group(chan)->get_value(name); - } - - gain_range_t get_rx_gain_range(const std::string &name, size_t chan){ - return _rx_gain_group(chan)->get_range(name); - } - - std::vector<std::string> get_rx_gain_names(size_t chan){ - return _rx_gain_group(chan)->get_names(); - } - - void set_rx_antenna(const std::string &ant, size_t chan){ - _rx_subdev(chan)[SUBDEV_PROP_ANTENNA] = ant; - } - - std::string get_rx_antenna(size_t chan){ - return _rx_subdev(chan)[SUBDEV_PROP_ANTENNA].as<std::string>(); - } - - std::vector<std::string> get_rx_antennas(size_t chan){ - return _rx_subdev(chan)[SUBDEV_PROP_ANTENNA_NAMES].as<prop_names_t>(); - } - - bool get_rx_lo_locked(size_t chan){ - return _rx_subdev(chan)[SUBDEV_PROP_LO_LOCKED].as<bool>(); - } - - void set_rx_bandwidth(double bandwidth, size_t chan){ - _rx_subdev(chan)[SUBDEV_PROP_BANDWIDTH] = bandwidth; - } - - double get_rx_bandwidth(size_t chan){ - return _rx_subdev(chan)[SUBDEV_PROP_BANDWIDTH].as<double>(); - } - - double read_rssi(size_t chan){ - return _rx_subdev(chan)[SUBDEV_PROP_RSSI].as<double>(); - } - - dboard_iface::sptr get_rx_dboard_iface(size_t chan){ - return _rx_dboard(chan)[DBOARD_PROP_DBOARD_IFACE].as<dboard_iface::sptr>(); - } - - /******************************************************************* - * TX methods - ******************************************************************/ - void set_tx_subdev_spec(const subdev_spec_t &spec){ - _mboard()[MBOARD_PROP_TX_SUBDEV_SPEC] = spec; - } - - subdev_spec_t get_tx_subdev_spec(void){ - return _mboard()[MBOARD_PROP_TX_SUBDEV_SPEC].as<subdev_spec_t>(); - } - - std::string get_tx_subdev_name(size_t chan){ - return _tx_subdev(chan)[SUBDEV_PROP_NAME].as<std::string>(); - } - - void set_tx_rate(double rate){ - _tx_dsp()[DSP_PROP_HOST_RATE] = rate; - do_samp_rate_warning_message(rate, get_tx_rate(), "TX"); - } - - double get_tx_rate(void){ - return _tx_dsp()[DSP_PROP_HOST_RATE].as<double>(); - } - - tune_result_t set_tx_freq(const tune_request_t &tune_request, size_t chan){ - tune_result_t r = tune_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(), chan, tune_request); - do_tune_freq_warning_message(tune_request.target_freq, get_tx_freq(chan), "TX"); - return r; - } - - double get_tx_freq(size_t chan){ - return derive_freq_from_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(), chan); - } - - freq_range_t get_tx_freq_range(size_t chan){ - return add_dsp_shift(_tx_subdev(chan)[SUBDEV_PROP_FREQ_RANGE].as<freq_range_t>(), _tx_dsp()); - } - - void set_tx_gain(double gain, const std::string &name, size_t chan){ - return _tx_gain_group(chan)->set_value(gain, name); - } - - double get_tx_gain(const std::string &name, size_t chan){ - return _tx_gain_group(chan)->get_value(name); - } - - gain_range_t get_tx_gain_range(const std::string &name, size_t chan){ - return _tx_gain_group(chan)->get_range(name); - } - - std::vector<std::string> get_tx_gain_names(size_t chan){ - return _tx_gain_group(chan)->get_names(); - } - - void set_tx_antenna(const std::string &ant, size_t chan){ - _tx_subdev(chan)[SUBDEV_PROP_ANTENNA] = ant; - } - - std::string get_tx_antenna(size_t chan){ - return _tx_subdev(chan)[SUBDEV_PROP_ANTENNA].as<std::string>(); - } - - std::vector<std::string> get_tx_antennas(size_t chan){ - return _tx_subdev(chan)[SUBDEV_PROP_ANTENNA_NAMES].as<prop_names_t>(); - } - - bool get_tx_lo_locked(size_t chan){ - return _tx_subdev(chan)[SUBDEV_PROP_LO_LOCKED].as<bool>(); - } - - void set_tx_bandwidth(double bandwidth, size_t chan){ - _tx_subdev(chan)[SUBDEV_PROP_BANDWIDTH] = bandwidth; - } - - double get_tx_bandwidth(size_t chan){ - return _tx_subdev(chan)[SUBDEV_PROP_BANDWIDTH].as<double>(); - } - - dboard_iface::sptr get_tx_dboard_iface(size_t chan){ - return _tx_dboard(chan)[DBOARD_PROP_DBOARD_IFACE].as<dboard_iface::sptr>(); - } - -private: - device::sptr _dev; - wax::obj _mboard(void){ - return (*_dev)[DEVICE_PROP_MBOARD]; - } - wax::obj _rx_dsp(void){ - return _mboard()[MBOARD_PROP_RX_DSP]; - } - wax::obj _tx_dsp(void){ - return _mboard()[MBOARD_PROP_TX_DSP]; - } - wax::obj _rx_dboard(size_t chan){ - std::string db_name = this->get_rx_subdev_spec().at(chan).db_name; - return _mboard()[named_prop_t(MBOARD_PROP_RX_DBOARD, db_name)]; - } - wax::obj _tx_dboard(size_t chan){ - std::string db_name = this->get_tx_subdev_spec().at(chan).db_name; - return _mboard()[named_prop_t(MBOARD_PROP_TX_DBOARD, db_name)]; - } - wax::obj _rx_subdev(size_t chan){ - std::string sd_name = this->get_rx_subdev_spec().at(chan).sd_name; - return _rx_dboard(chan)[named_prop_t(DBOARD_PROP_SUBDEV, sd_name)]; - } - wax::obj _tx_subdev(size_t chan){ - std::string sd_name = this->get_tx_subdev_spec().at(chan).sd_name; - return _tx_dboard(chan)[named_prop_t(DBOARD_PROP_SUBDEV, sd_name)]; - } - gain_group::sptr _rx_gain_group(size_t chan){ - std::string sd_name = this->get_rx_subdev_spec().at(chan).sd_name; - return _rx_dboard(chan)[named_prop_t(DBOARD_PROP_GAIN_GROUP, sd_name)].as<gain_group::sptr>(); - } - gain_group::sptr _tx_gain_group(size_t chan){ - std::string sd_name = this->get_tx_subdev_spec().at(chan).sd_name; - return _tx_dboard(chan)[named_prop_t(DBOARD_PROP_GAIN_GROUP, sd_name)].as<gain_group::sptr>(); - } -}; - -/*********************************************************************** - * The Make Function - **********************************************************************/ -single_usrp::sptr single_usrp::make(const device_addr_t &dev_addr){ - return sptr(new single_usrp_impl(dev_addr)); -} diff --git a/host/lib/usrp/usrp1/clock_ctrl.cpp b/host/lib/usrp/usrp1/clock_ctrl.cpp index 68c5f5320..156f2b0c4 100644 --- a/host/lib/usrp/usrp1/clock_ctrl.cpp +++ b/host/lib/usrp/usrp1/clock_ctrl.cpp @@ -29,32 +29,33 @@ using namespace uhd; /*********************************************************************** * Constants **********************************************************************/ -static const double master_clock_rate = 64e6; +static const double default_master_clock_rate = 64e6; /*********************************************************************** * Clock Control Implementation **********************************************************************/ class usrp1_clock_ctrl_impl : public usrp1_clock_ctrl { public: - usrp1_clock_ctrl_impl(usrp1_iface::sptr iface) - { - _iface = iface; + usrp1_clock_ctrl_impl(usrp1_iface::sptr iface): _iface(iface){ + this->set_master_clock_freq(default_master_clock_rate); } - double get_master_clock_freq(void) - { - return master_clock_rate; + void set_master_clock_freq(double freq){ + _freq = freq; + } + + double get_master_clock_freq(void){ + return _freq; } private: usrp1_iface::sptr _iface; - + double _freq; }; /*********************************************************************** * Clock Control Make **********************************************************************/ -usrp1_clock_ctrl::sptr usrp1_clock_ctrl::make(usrp1_iface::sptr iface) -{ +usrp1_clock_ctrl::sptr usrp1_clock_ctrl::make(usrp1_iface::sptr iface){ return sptr(new usrp1_clock_ctrl_impl(iface)); } diff --git a/host/lib/usrp/usrp1/clock_ctrl.hpp b/host/lib/usrp/usrp1/clock_ctrl.hpp index 366869dab..645472f02 100644 --- a/host/lib/usrp/usrp1/clock_ctrl.hpp +++ b/host/lib/usrp/usrp1/clock_ctrl.hpp @@ -40,6 +40,13 @@ public: static sptr make(usrp1_iface::sptr iface); /*! + * Set the rate of the fpga clock line. + * Note: does not really set, its all software. + * \param freq the new clock rate in Hz + */ + virtual void set_master_clock_freq(double freq) = 0; + + /*! * Get the rate of the fpga clock line. * \return the fpga clock rate in Hz */ diff --git a/host/lib/usrp/usrp1/mboard_impl.cpp b/host/lib/usrp/usrp1/mboard_impl.cpp index 23c8f03c4..6d5bf466d 100644 --- a/host/lib/usrp/usrp1/mboard_impl.cpp +++ b/host/lib/usrp/usrp1/mboard_impl.cpp @@ -317,6 +317,10 @@ void usrp1_impl::mboard_get(const wax::obj &key_, wax::obj &val) val = _soft_time_ctrl->get_time(); return; + case MBOARD_PROP_CLOCK_RATE: + val = _clock_ctrl->get_master_clock_freq(); + return; + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -379,6 +383,10 @@ void usrp1_impl::mboard_set(const wax::obj &key, const wax::obj &val) _soft_time_ctrl->set_time(val.as<time_spec_t>()); return; + case MBOARD_PROP_CLOCK_RATE: + _clock_ctrl->set_master_clock_freq(val.as<double>()); + return; + default: UHD_THROW_PROP_SET_ERROR(); } } diff --git a/host/lib/usrp/usrp2/mboard_impl.cpp b/host/lib/usrp/usrp2/mboard_impl.cpp index 3e7e8b01f..784f662d9 100644 --- a/host/lib/usrp/usrp2/mboard_impl.cpp +++ b/host/lib/usrp/usrp2/mboard_impl.cpp @@ -355,6 +355,10 @@ void usrp2_mboard_impl::get(const wax::obj &key_, wax::obj &val){ val = _iface->mb_eeprom; return; + case MBOARD_PROP_CLOCK_RATE: + val = this->get_master_clock_freq(); + return; + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -412,6 +416,10 @@ void usrp2_mboard_impl::set(const wax::obj &key, const wax::obj &val){ _iface->mb_eeprom = mboard_eeprom_t(*_iface, mboard_eeprom_t::MAP_N100); return; + case MBOARD_PROP_CLOCK_RATE: + UHD_ASSERT_THROW(val.as<double>() == this->get_master_clock_freq()); + return; + default: UHD_THROW_PROP_SET_ERROR(); } } |