diff options
Diffstat (limited to 'host')
| -rw-r--r-- | host/docs/dboards.dox | 3 | ||||
| -rw-r--r-- | host/docs/twinrx.dox | 22 |
2 files changed, 25 insertions, 0 deletions
diff --git a/host/docs/dboards.dox b/host/docs/dboards.dox index 0ab5927a6..dfeadf0ed 100644 --- a/host/docs/dboards.dox +++ b/host/docs/dboards.dox @@ -384,6 +384,9 @@ Receive Antennas: **RX1** and **RX2** Receive Gain: 0-93dB +The TwinRX daughterboard only works with the X300/X310 motherboards, and +requires a master clock rate of 200 MHz. + More information: \li \subpage page_twinrx diff --git a/host/docs/twinrx.dox b/host/docs/twinrx.dox index c85b78b4c..cc7f8f3a1 100644 --- a/host/docs/twinrx.dox +++ b/host/docs/twinrx.dox @@ -14,6 +14,28 @@ communication with a combined bandwidth of 160 MHz. The ability to share the LO daughterboards enables the phase-aligned operation required to implement scalable multi-channel phased-arrays. The receiver is capable of fast frequency hopping to detect frequency agile emitters. +The TwinRX daughterboard only works with the X300/X310 series of USRPs. + +\subsection twinrx_dboards_mcr Master Clock Rate, Sampling Rate, and Tick Rate + +Due to the specific configuration of the analog filters, the TwinRX can only +support a master clock rate of 200 MHz. Since the X310/X300 only has a single +master clock, this means that the only valid tick rate for the X300/X310 is +200 MHz, even if there is another daughterboard in the same device which could +support a different tick rate. + +The TwinRX uses the dual-ADC of each X300 channel to sample two separate IF +streams, thus enabling two receive channels where there usually only is one. +Every IF channel is sampled at 200 MHz (real sampling), and then converted to +a 100 Msps complex sample stream per channel. This means the total output of +one daughterboard is 2x100 Msps, which is the same aggregate sampling rate as +with single-channel daughterboards such as the UBX. + +The tick rate is then also halved to match the sampling rate. Timed commands +are executed relative to a sample edge in the I/Q domain, i.e., at a granularity +of 1/100 MHz = 10 ns. + + \image html TwinRX_Block_Diagram.png "TwinRX Block Diagram" \subsection twinrx_frequency_bands Frequency Bands |