aboutsummaryrefslogtreecommitdiffstats
path: root/host
diff options
context:
space:
mode:
Diffstat (limited to 'host')
-rw-r--r--host/docs/usrp_e1xx.rst15
-rw-r--r--host/lib/usrp/mboard_eeprom.cpp29
-rw-r--r--host/lib/usrp/usrp_e100/clock_ctrl.cpp28
-rw-r--r--host/lib/usrp/usrp_e100/clock_ctrl.hpp3
-rw-r--r--host/lib/usrp/usrp_e100/mboard_impl.cpp3
-rw-r--r--host/lib/usrp/usrp_e100/usrp_e100_impl.cpp3
6 files changed, 19 insertions, 62 deletions
diff --git a/host/docs/usrp_e1xx.rst b/host/docs/usrp_e1xx.rst
index 036d2c02c..fcaa57716 100644
--- a/host/docs/usrp_e1xx.rst
+++ b/host/docs/usrp_e1xx.rst
@@ -35,12 +35,7 @@ To use the 61.44MHz clock rate, the USRP embedded will require two jumpers to be
* J16 is a two pin header, remove the jumper (or leave it on pin1 only)
* J15 is a three pin header, move the jumper to (pin1, pin2)
-Then run the following commands to record the setting into the EEPROM:
-::
-
- cd <install-path>/share/uhd/utils
- ./usrp_burn_mb_eeprom --key=mcr --val=61.44e6
-
+**Note:** See instructions below to communicate the desired clock rate into the UHD.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Set other rates - uses internal VCO
@@ -50,11 +45,13 @@ To use other clock rates, the jumpers will need to be in the default position.
* J16 is a two pin header, move the jumper to (pin1, pin2)
* J15 is a three pin header, move the jumper to (pin2, pin3)
-Then run the following commands to record the setting into the EEPROM:
+To communicate the desired clock rate into the UHD,
+specify the a special device address argument,
+where the key is "master_clock_rate" and the value is a rate in Hz.
+Example:
::
- cd <install-path>/share/uhd/utils
- ./usrp_burn_mb_eeprom --key=mcr --val=<rate>
+ uhd_usrp_probe --args="master_clock_rate=52e6"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Clock rate recovery - unbricking
diff --git a/host/lib/usrp/mboard_eeprom.cpp b/host/lib/usrp/mboard_eeprom.cpp
index 297de990f..2ee4a9284 100644
--- a/host/lib/usrp/mboard_eeprom.cpp
+++ b/host/lib/usrp/mboard_eeprom.cpp
@@ -252,8 +252,7 @@ struct e100_eeprom_map{
unsigned char env_var[16];
unsigned char env_setting[64];
unsigned char serial[10];
- unsigned char name[16];
- unsigned char mcr[sizeof(float)];
+ unsigned char name[NAME_MAX_LEN];
};
template <typename T> static const byte_vector_t to_bytes(const T &item){
@@ -285,20 +284,6 @@ static void load_e100(mboard_eeprom_t &mb_eeprom, i2c_iface &iface){
load_e100_string_xx(env_setting);
load_e100_string_xx(serial);
load_e100_string_xx(name);
-
- //extract the master clock rate
- float master_clock_rate = 0;
- const byte_vector_t rate_bytes = iface.read_eeprom(
- E100_EEPROM_ADDR, offsetof(e100_eeprom_map, mcr), sizeof(master_clock_rate)
- );
- std::copy(
- rate_bytes.begin(), rate_bytes.end(), //source
- reinterpret_cast<boost::uint8_t *>(&master_clock_rate) //destination
- );
- if (master_clock_rate > 1e6 and master_clock_rate < 1e9){
- mb_eeprom["mcr"] = boost::lexical_cast<std::string>(master_clock_rate);
- }
- else mb_eeprom["mcr"] = "";
}
static void store_e100(const mboard_eeprom_t &mb_eeprom, i2c_iface &iface){
@@ -333,18 +318,6 @@ static void store_e100(const mboard_eeprom_t &mb_eeprom, i2c_iface &iface){
store_e100_string_xx(env_setting);
store_e100_string_xx(serial);
store_e100_string_xx(name);
-
- //store the master clock rate
- if (mb_eeprom.has_key("mcr")){
- const float master_clock_rate = float(boost::lexical_cast<double>(mb_eeprom["mcr"]));
- const byte_vector_t rate_bytes(
- reinterpret_cast<const boost::uint8_t *>(&master_clock_rate),
- reinterpret_cast<const boost::uint8_t *>(&master_clock_rate) + sizeof(master_clock_rate)
- );
- iface.write_eeprom(
- E100_EEPROM_ADDR, offsetof(e100_eeprom_map, mcr), rate_bytes
- );
- }
}
/***********************************************************************
diff --git a/host/lib/usrp/usrp_e100/clock_ctrl.cpp b/host/lib/usrp/usrp_e100/clock_ctrl.cpp
index 968c2ea04..49ce0c742 100644
--- a/host/lib/usrp/usrp_e100/clock_ctrl.cpp
+++ b/host/lib/usrp/usrp_e100/clock_ctrl.cpp
@@ -37,7 +37,6 @@ using namespace uhd;
**********************************************************************/
static const bool ENABLE_THE_TEST_OUT = true;
static const double REFERENCE_INPUT_RATE = 10e6;
-static const double DEFAULT_OUTPUT_RATE = 64e6;
/***********************************************************************
* Helpers
@@ -168,7 +167,7 @@ static clock_settings_type get_clock_settings(double rate){
**********************************************************************/
class usrp_e100_clock_ctrl_impl : public usrp_e100_clock_ctrl{
public:
- usrp_e100_clock_ctrl_impl(usrp_e100_iface::sptr iface){
+ usrp_e100_clock_ctrl_impl(usrp_e100_iface::sptr iface, double master_clock_rate){
_iface = iface;
_chan_rate = 0.0;
_out_rate = 0.0;
@@ -185,24 +184,9 @@ public:
this->use_internal_ref();
- //initialize the FPGA clock to something
- bool fpga_clock_initialized = false;
- try{
- if (not _iface->mb_eeprom["mcr"].empty()){
- UHD_MSG(status) << "Read FPGA clock rate from EEPROM setting." << std::endl;
- const double master_clock_rate = boost::lexical_cast<double>(_iface->mb_eeprom["mcr"]);
- UHD_MSG(status) << boost::format("Initializing FPGA clock to %fMHz...") % (master_clock_rate/1e6) << std::endl;
- this->set_fpga_clock_rate(master_clock_rate);
- fpga_clock_initialized = true;
- }
- }
- catch(const std::exception &e){
- UHD_MSG(error) << "Error setting FPGA clock rate from EEPROM: " << e.what() << std::endl;
- }
- if (not fpga_clock_initialized){ //was not set... use the default rate
- UHD_MSG(status) << boost::format("Initializing FPGA clock to %fMHz...") % (DEFAULT_OUTPUT_RATE/1e6) << std::endl;
- this->set_fpga_clock_rate(DEFAULT_OUTPUT_RATE);
- }
+ //initialize the FPGA clock rate
+ UHD_MSG(status) << boost::format("Initializing FPGA clock to %fMHz...") % (master_clock_rate/1e6) << std::endl;
+ this->set_fpga_clock_rate(master_clock_rate);
this->enable_test_clock(ENABLE_THE_TEST_OUT);
this->enable_rx_dboard_clock(false);
@@ -518,6 +502,6 @@ private:
/***********************************************************************
* Clock Control Make
**********************************************************************/
-usrp_e100_clock_ctrl::sptr usrp_e100_clock_ctrl::make(usrp_e100_iface::sptr iface){
- return sptr(new usrp_e100_clock_ctrl_impl(iface));
+usrp_e100_clock_ctrl::sptr usrp_e100_clock_ctrl::make(usrp_e100_iface::sptr iface, double master_clock_rate){
+ return sptr(new usrp_e100_clock_ctrl_impl(iface, master_clock_rate));
}
diff --git a/host/lib/usrp/usrp_e100/clock_ctrl.hpp b/host/lib/usrp/usrp_e100/clock_ctrl.hpp
index 507f914f3..6f16bc6ed 100644
--- a/host/lib/usrp/usrp_e100/clock_ctrl.hpp
+++ b/host/lib/usrp/usrp_e100/clock_ctrl.hpp
@@ -35,9 +35,10 @@ public:
/*!
* Make a new clock control object.
* \param iface the usrp_e100 iface object
+ * \param master clock rate the FPGA rate
* \return the clock control object
*/
- static sptr make(usrp_e100_iface::sptr iface);
+ static sptr make(usrp_e100_iface::sptr iface, double master_clock_rate);
/*!
* Set the rate of the fpga clock line.
diff --git a/host/lib/usrp/usrp_e100/mboard_impl.cpp b/host/lib/usrp/usrp_e100/mboard_impl.cpp
index d31662eb5..b2533e7ee 100644
--- a/host/lib/usrp/usrp_e100/mboard_impl.cpp
+++ b/host/lib/usrp/usrp_e100/mboard_impl.cpp
@@ -209,7 +209,8 @@ void usrp_e100_impl::mboard_set(const wax::obj &key, const wax::obj &val){
case MBOARD_PROP_CLOCK_RATE:
UHD_MSG(warning)
<< "I see that you are setting the master clock rate from the API.\n"
- << "You may find it more convenient to burn this setting into the EEPROM.\n"
+ << "You may want to pass this into the device address as mcr=<rate>.\n"
+ << "This way, the clock rate is guaranteed to be initialized first.\n"
<< "See the application notes for USRP-E1XX for further instructions.\n"
;
_clock_ctrl->set_fpga_clock_rate(val.as<double>());
diff --git a/host/lib/usrp/usrp_e100/usrp_e100_impl.cpp b/host/lib/usrp/usrp_e100/usrp_e100_impl.cpp
index 4247746ab..5fba0c153 100644
--- a/host/lib/usrp/usrp_e100/usrp_e100_impl.cpp
+++ b/host/lib/usrp/usrp_e100/usrp_e100_impl.cpp
@@ -156,7 +156,8 @@ usrp_e100_impl::usrp_e100_impl(
{
//setup interfaces into hardware
- _clock_ctrl = usrp_e100_clock_ctrl::make(_iface);
+ const double master_clock_rate = device_addr.cast<double>("master_clock_rate", 64e6);
+ _clock_ctrl = usrp_e100_clock_ctrl::make(_iface, master_clock_rate);
_codec_ctrl = usrp_e100_codec_ctrl::make(_iface);
//initialize the mboard
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 13:51:35 +0000