diff options
Diffstat (limited to 'host')
69 files changed, 7313 insertions, 11 deletions
diff --git a/host/CMakeLists.txt b/host/CMakeLists.txt index ceea5d024..78948d9bd 100644 --- a/host/CMakeLists.txt +++ b/host/CMakeLists.txt @@ -16,7 +16,7 @@ # CMAKE_MINIMUM_REQUIRED(VERSION 2.6) -PROJECT(UHD CXX) +PROJECT(UHD CXX C) ENABLE_TESTING() ######################################################################## @@ -61,8 +61,6 @@ ENDIF(NOT CMAKE_BUILD_TYPE) IF(CMAKE_COMPILER_IS_GNUCXX) ADD_DEFINITIONS(-Wall) ADD_DEFINITIONS(-Wextra) - ADD_DEFINITIONS(-pedantic) - ADD_DEFINITIONS(-ansi) #only export symbols that are declared to be part of the uhd api: UHD_ADD_OPTIONAL_CXX_COMPILER_FLAG(-fvisibility=hidden HAVE_VISIBILITY_HIDDEN) ENDIF(CMAKE_COMPILER_IS_GNUCXX) diff --git a/host/apps/omap_debug/.gitignore b/host/apps/omap_debug/.gitignore new file mode 100644 index 000000000..008a23138 --- /dev/null +++ b/host/apps/omap_debug/.gitignore @@ -0,0 +1,20 @@ +.gitignore +clkgen-config +fpga-downloader +usrp-e-button +usrp-e-crc-rw +usrp-e-ctl +usrp-e-debug-pins +usrp-e-fpga-rw +usrp-e-gpio +usrp-e-i2c +usrp-e-lb-test +usrp-e-led +usrp-e-loopback +usrp-e-random-loopback +usrp-e-rw +usrp-e-spi +usrp-e-timed +usrp-e-uart +usrp-e-uart-rx +usrp-e-mm-loopback diff --git a/host/apps/omap_debug/Makefile b/host/apps/omap_debug/Makefile new file mode 100644 index 000000000..46d4714a8 --- /dev/null +++ b/host/apps/omap_debug/Makefile @@ -0,0 +1,61 @@ +CFLAGS=-Wall -I../../lib/usrp/usrp_e/ -march=armv7-a -mtune=cortex-a8 -mfpu=neon -O3 +CXXFLAGS=-Wall -I../../lib/usrp/usrp_e/ -march=armv7-a -mtune=cortex-a8 -mfpu=neon -O3 + +all : usrp-e-spi usrp-e-i2c usrp-e-loopback usrp-e-mm-loopback usrp-e-uart usrp-e-led usrp-e-ctl usrp-e-button usrp-e-uart-rx fpga-downloader usrp-e-gpio usrp-e-debug-pins usrp-e-random-loopback usrp-e-timed usrp-e-lb-test usrp-e-crc-rw clkgen-config + +usrp-e-spi : usrp-e-spi.c + +usrp-e-i2c : usrp-e-i2c.c + +usrp-e-loopback : usrp-e-loopback.c + gcc -o $@ $< -lpthread ${CFLAGS} + +usrp-e-mm-loopback : usrp-e-mm-loopback.c + gcc -o $@ $< -lpthread ${CFLAGS} + +usrp-e-timed : usrp-e-timed.c + gcc -o $@ $< -lpthread ${CFLAGS} + +usrp-e-random-loopback : usrp-e-random-loopback.c + gcc -o $@ $< -lpthread ${CFLAGS} + +usrp-e-crc-rw : usrp-e-crc-rw.c + gcc -o $@ $< -lpthread ${CFLAGS} + +usrp-e-uart : usrp-e-uart.c + +usrp-e-uart-rx : usrp-e-uart-rx.c + +usrp-e-led : usrp-e-led.c + +usrp-e-ctl : usrp-e-ctl.c + +usrp-e-button : usrp-e-button.c + +fpga-downloader : fpga-downloader.cc + +clkgen-config : clkgen-config.cc + +usrp-e-gpio : usrp-e-gpio.c + +usrp-e-lb-test : usrp-e-lb-test.c + +usrp-e-debug-pins : usrp-e-debug-pins.c +clean : + rm -f usrp-e-spi + rm -f usrp-e-i2c + rm -f usrp-e-loopback + rm -f usrp-e-mm-loopback + rm -f usrp-e-timed + rm -f usrp-e-rw-random + rm -f usrp-e-uart + rm -f usrp-e-uart-rx + rm -f usrp-e-led + rm -f usrp-e-ctl + rm -f usrp-e-button + rm -f fpga-downloader + rm -f usrp-e-gpio + rm -f usrp-e-debug-pins + rm -f usrp-e-lb-test + rm -f usrp-e-crc-rw + rm -f clkgen-config diff --git a/host/apps/omap_debug/README b/host/apps/omap_debug/README new file mode 100644 index 000000000..bbe0c2cc4 --- /dev/null +++ b/host/apps/omap_debug/README @@ -0,0 +1 @@ +OMAP development tools go here diff --git a/host/apps/omap_debug/clkgen-config.cc b/host/apps/omap_debug/clkgen-config.cc new file mode 100644 index 000000000..e8279b4ae --- /dev/null +++ b/host/apps/omap_debug/clkgen-config.cc @@ -0,0 +1,296 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003,2004,2008,2009 Free Software Foundation, Inc. + * + * This file is part of UHD + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. +*/ + +#include <iostream> +#include <sstream> +#include <fstream> +#include <string> +#include <cstdlib> + +#include <fcntl.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/ioctl.h> + +#include <linux/spi/spidev.h> + + +// Programming data for clock gen chip +static const unsigned int config_data[] = { + 0x000024, + 0x023201, + 0x000081, + 0x000400, + 0x00104c, + 0x001101, + 0x001200, + 0x001300, + 0x001414, + 0x001500, + 0x001604, + 0x001704, + 0x001807, + 0x001900, + //0x001a00,//for debug + 0x001a32, + 0x001b12, + 0x001c44, + 0x001d00, + 0x001e00, + 0x00f062, + 0x00f162, + 0x00f262, + 0x00f362, + 0x00f462, + 0x00f562, + 0x00f662, + 0x00f762, + 0x00f862, + 0x00f962, + 0x00fa62, + 0x00fb62, + 0x00fc00, + 0x00fd00, + 0x019021, + 0x019100, + 0x019200, + 0x019333, + 0x019400, + 0x019500, + 0x019611, + 0x019700, + 0x019800, + 0x019900, + 0x019a00, + 0x019b00, + 0x01e003, + 0x01e102, + 0x023000, + 0x023201, + 0x0b0201, + 0x0b0300, + 0x001fff, + 0x0a0000, + 0x0a0100, + 0x0a0200, + 0x0a0302, + 0x0a0400, + 0x0a0504, + 0x0a060e, + 0x0a0700, + 0x0a0810, + 0x0a090e, + 0x0a0a00, + 0x0a0bf0, + 0x0a0c0b, + 0x0a0d01, + 0x0a0e90, + 0x0a0f01, + 0x0a1001, + 0x0a11e0, + 0x0a1201, + 0x0a1302, + 0x0a1430, + 0x0a1580, + 0x0a16ff, + 0x023201, + 0x0b0301, + 0x023201, +}; + + +const unsigned int CLKGEN_SELECT = 145; + + +enum gpio_direction {IN, OUT}; + +class gpio { + public: + + gpio(unsigned int gpio_num, gpio_direction pin_direction, bool close_action); + ~gpio(); + + bool get_value(); + void set_value(bool state); + + private: + + unsigned int gpio_num; + + std::stringstream base_path; + std::fstream value_file; + std::fstream direction_file; + bool close_action; // True set to input and release, false do nothing +}; + +class spidev { + public: + + spidev(std::string dev_name); + ~spidev(); + + void send(char *wbuf, char *rbuf, unsigned int nbytes); + + private: + + int fd; + +}; + +gpio::gpio(unsigned int _gpio_num, gpio_direction pin_direction, bool close_action) +{ + std::fstream export_file; + + gpio_num = _gpio_num; + + export_file.open("/sys/class/gpio/export", std::ios::out); + if (!export_file.is_open()) ///\todo Poor error handling + std::cout << "Failed to open gpio export file." << std::endl; + + export_file << gpio_num << std::endl; + + base_path << "/sys/class/gpio/gpio" << gpio_num << std::flush; + + std::string direction_file_name; + + direction_file_name = base_path.str() + "/direction"; + + direction_file.open(direction_file_name.c_str()); + if (!direction_file.is_open()) + std::cout << "Failed to open direction file." << std::endl; + if (pin_direction == OUT) + direction_file << "out" << std::endl; + else + direction_file << "in" << std::endl; + + std::string value_file_name; + + value_file_name = base_path.str() + "/value"; + + value_file.open(value_file_name.c_str(), std::ios_base::in | std::ios_base::out); + if (!value_file.is_open()) + std::cout << "Failed to open value file." << std::endl; +} + +bool gpio::get_value() +{ + + std::string val; + + std::getline(value_file, val); + value_file.seekg(0); + + if (val == "0") + return false; + else if (val == "1") + return true; + else + std::cout << "Data read from value file|" << val << "|" << std::endl; + + return false; +} + +void gpio::set_value(bool state) +{ + + if (state) + value_file << "1" << std::endl; + else + value_file << "0" << std::endl; +} + +gpio::~gpio() +{ + if (close_action) { + std::fstream unexport_file; + + direction_file << "in" << std::endl; + + unexport_file.open("/sys/class/gpio/unexport", std::ios::out); + if (!unexport_file.is_open()) ///\todo Poor error handling + std::cout << "Failed to open gpio export file." << std::endl; + + unexport_file << gpio_num << std::endl; + + } + +} + +spidev::spidev(std::string fname) +{ + int ret; + int mode = 0; + int speed = 12000; + int bits = 24; + + fd = open(fname.c_str(), O_RDWR); + + ret = ioctl(fd, SPI_IOC_WR_MODE, &mode); + ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed); + ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits); +} + + +spidev::~spidev() +{ + close(fd); +} + +void spidev::send(char *buf, char *rbuf, unsigned int nbytes) +{ + int ret; + + struct spi_ioc_transfer tr; + tr.tx_buf = (unsigned long) buf; + tr.rx_buf = (unsigned long) rbuf; + tr.len = nbytes; + tr.delay_usecs = 0; + tr.speed_hz = 12000000; + tr.bits_per_word = 24; + + ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); + +} + +static void send_config_to_clkgen(gpio &chip_select, const unsigned int data[], unsigned int data_size) +{ + spidev spi("/dev/spidev1.0"); + unsigned int rbuf; + + for (unsigned int i = 0; i < data_size; i++) { + + std::cout << "sending " << std::hex << data[i] << std::endl; + chip_select.set_value(0); + spi.send((char *)&data[i], (char *)&rbuf, 4); + chip_select.set_value(1); + + }; +} + +int main(int argc, char *argv[]) +{ + + gpio clkgen_select(CLKGEN_SELECT, OUT, true); + + send_config_to_clkgen(clkgen_select, config_data, sizeof(config_data)/sizeof(unsigned int)); +} + diff --git a/host/apps/omap_debug/fetch-bin.sh b/host/apps/omap_debug/fetch-bin.sh new file mode 100755 index 000000000..019ddaaf2 --- /dev/null +++ b/host/apps/omap_debug/fetch-bin.sh @@ -0,0 +1,6 @@ +if [ $GHQ ]; then + scp $GHQ_USER@astro:/workspace/usrp1-e-dev/u1e.bin /home/root +else + scp -P 8822 balister@192.168.1.10:src/git/fpgapriv/usrp2/top/u1e/build/u1e.bin /home/root +fi +sync diff --git a/host/apps/omap_debug/fetch-kernel.sh b/host/apps/omap_debug/fetch-kernel.sh new file mode 100755 index 000000000..ce420f3d2 --- /dev/null +++ b/host/apps/omap_debug/fetch-kernel.sh @@ -0,0 +1,7 @@ +if [ $GHQ ]; then + scp $GHQ_USER@astro:/workspace/usrp1-e-dev/kernel_usrp/arch/arm/boot/uImage /media/mmcblk0p1/uImage +else + scp balister@192.168.1.10:src/git/kernel_usrp/arch/arm/boot/uImage /media/mmcblk0p1/uImage +fi +sync + diff --git a/host/apps/omap_debug/fetch-module.sh b/host/apps/omap_debug/fetch-module.sh new file mode 100755 index 000000000..ec28989bd --- /dev/null +++ b/host/apps/omap_debug/fetch-module.sh @@ -0,0 +1,6 @@ +if [ $GHQ ]; then + scp $GHQ_USER@astro:/workspace/usrp1-e-dev/kernel_usrp/drivers/misc/usrp_e.ko /lib/modules/2.6.33/kernel/drivers/misc +else + scp balister@192.168.1.10:src/git/kernel_usrp/drivers/misc/usrp_e.ko /lib/modules/2.6.33/kernel/drivers/misc +fi +sync diff --git a/host/apps/omap_debug/fetch-u-boot.sh b/host/apps/omap_debug/fetch-u-boot.sh new file mode 100755 index 000000000..5309364b8 --- /dev/null +++ b/host/apps/omap_debug/fetch-u-boot.sh @@ -0,0 +1,7 @@ +if [ $GHQ ]; then + scp $GHQ_USER@astro:/workspace/usrp1-e-dev/u-boot-overo/u-boot.bin /media/mmcblk0p1/ +else + scp balister@192.168.1.167:src/git/u-boot/u-boot.bin /media/mmcblk0p1/ +fi +sync + diff --git a/host/apps/omap_debug/fpga-downloader.cc b/host/apps/omap_debug/fpga-downloader.cc new file mode 100644 index 000000000..fb96b64a3 --- /dev/null +++ b/host/apps/omap_debug/fpga-downloader.cc @@ -0,0 +1,251 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003,2004,2008,2009 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. +*/ + +#include <iostream> +#include <sstream> +#include <fstream> +#include <string> +#include <cstdlib> + +#include <fcntl.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/ioctl.h> + +#include <linux/spi/spidev.h> + +/* + * Configuration connections + * + * CCK - MCSPI1_CLK + * DIN - MCSPI1_MOSI + * PROG_B - GPIO_175 - output (change mux) + * DONE - GPIO_173 - input (change mux) + * INIT_B - GPIO_114 - input (change mux) + * +*/ + +const unsigned int PROG_B = 175; +const unsigned int DONE = 173; +const unsigned int INIT_B = 114; + +static std::string bit_file = "safe_u1e.bin"; + +const int BUF_SIZE = 4096; + +enum gpio_direction {IN, OUT}; + +class gpio { + public: + + gpio(unsigned int gpio_num, gpio_direction pin_direction); + + bool get_value(); + void set_value(bool state); + + private: + + std::stringstream base_path; + std::fstream value_file; +}; + +class spidev { + public: + + spidev(std::string dev_name); + ~spidev(); + + void send(char *wbuf, char *rbuf, unsigned int nbytes); + + private: + + int fd; + +}; + +gpio::gpio(unsigned int gpio_num, gpio_direction pin_direction) +{ + std::fstream export_file; + + export_file.open("/sys/class/gpio/export", std::ios::out); + if (!export_file.is_open()) ///\todo Poor error handling + std::cout << "Failed to open gpio export file." << std::endl; + + export_file << gpio_num << std::endl; + + base_path << "/sys/class/gpio/gpio" << gpio_num << std::flush; + + std::fstream direction_file; + std::string direction_file_name; + + direction_file_name = base_path.str() + "/direction"; + + direction_file.open(direction_file_name.c_str()); + if (!direction_file.is_open()) + std::cout << "Failed to open direction file." << std::endl; + if (pin_direction == OUT) + direction_file << "out" << std::endl; + else + direction_file << "in" << std::endl; + + std::string value_file_name; + + value_file_name = base_path.str() + "/value"; + + value_file.open(value_file_name.c_str(), std::ios_base::in | std::ios_base::out); + if (!value_file.is_open()) + std::cout << "Failed to open value file." << std::endl; +} + +bool gpio::get_value() +{ + + std::string val; + + std::getline(value_file, val); + value_file.seekg(0); + + if (val == "0") + return false; + else if (val == "1") + return true; + else + std::cout << "Data read from value file|" << val << "|" << std::endl; + + return false; +} + +void gpio::set_value(bool state) +{ + + if (state) + value_file << "1" << std::endl; + else + value_file << "0" << std::endl; +} + +static void prepare_fpga_for_configuration(gpio &prog, gpio &init) +{ + + prog.set_value(true); + prog.set_value(false); + prog.set_value(true); + +#if 0 + bool ready_to_program(false); + unsigned int count(0); + do { + ready_to_program = init.get_value(); + count++; + + sleep(1); + } while (count < 10 && !ready_to_program); + + if (count == 10) { + std::cout << "FPGA not ready for programming." << std::endl; + exit(-1); + } +#endif +} + +spidev::spidev(std::string fname) +{ + int ret; + int mode = 0; + int speed = 12000000; + int bits = 8; + + fd = open(fname.c_str(), O_RDWR); + + ret = ioctl(fd, SPI_IOC_WR_MODE, &mode); + ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed); + ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits); +} + + +spidev::~spidev() +{ + close(fd); +} + +void spidev::send(char *buf, char *rbuf, unsigned int nbytes) +{ + int ret; + + struct spi_ioc_transfer tr; + tr.tx_buf = (unsigned long) buf; + tr.rx_buf = (unsigned long) rbuf; + tr.len = nbytes; + tr.delay_usecs = 0; + tr.speed_hz = 48000000; + tr.bits_per_word = 8; + + ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); + +} + +static void send_file_to_fpga(std::string &file_name, gpio &error, gpio &done) +{ + std::ifstream bitstream; + + std::cout << "File name - " << file_name.c_str() << std::endl; + + bitstream.open(file_name.c_str(), std::ios::binary); + if (!bitstream.is_open()) + std::cout << "File " << file_name << " not opened succesfully." << std::endl; + + spidev spi("/dev/spidev1.0"); + char buf[BUF_SIZE]; + char rbuf[BUF_SIZE]; + + do { + bitstream.read(buf, BUF_SIZE); + spi.send(buf, rbuf, bitstream.gcount()); + + if (error.get_value()) + std::cout << "INIT_B went high, error occured." << std::endl; + + if (!done.get_value()) + std::cout << "Configuration complete." << std::endl; + + } while (bitstream.gcount() == BUF_SIZE); +} + +int main(int argc, char *argv[]) +{ + + gpio gpio_prog_b(PROG_B, OUT); + gpio gpio_init_b(INIT_B, IN); + gpio gpio_done (DONE, IN); + + if (argc == 2) + bit_file = argv[1]; + + std::cout << "FPGA config file: " << bit_file << std::endl; + + prepare_fpga_for_configuration(gpio_prog_b, gpio_init_b); + + std::cout << "Done = " << gpio_done.get_value() << std::endl; + + send_file_to_fpga(bit_file, gpio_init_b, gpio_done); +} + diff --git a/host/apps/omap_debug/read_board_id.sh b/host/apps/omap_debug/read_board_id.sh new file mode 100755 index 000000000..96081f219 --- /dev/null +++ b/host/apps/omap_debug/read_board_id.sh @@ -0,0 +1,10 @@ +#!/bin/sh + +i2cget -y 3 0x51 0x00 b +i2cget -y 3 0x51 0x01 b +i2cget -y 3 0x51 0x02 b +i2cget -y 3 0x51 0x03 b +i2cget -y 3 0x51 0x04 b +i2cget -y 3 0x51 0x05 b + + diff --git a/host/apps/omap_debug/reload-fpga.sh b/host/apps/omap_debug/reload-fpga.sh new file mode 100755 index 000000000..2754718a4 --- /dev/null +++ b/host/apps/omap_debug/reload-fpga.sh @@ -0,0 +1,7 @@ +#!/bin/sh + +rmmod usrp_e +fpga-downloader /home/root/u1e.bin +modprobe usrp_e +usrp-e-debug-pins 1 + diff --git a/host/apps/omap_debug/set_debug_pins.py b/host/apps/omap_debug/set_debug_pins.py new file mode 100755 index 000000000..0f9ecd7b9 --- /dev/null +++ b/host/apps/omap_debug/set_debug_pins.py @@ -0,0 +1,35 @@ +#!/usr/bin/python + +import os + +# Memory Map +misc_base = 0 +uart_base = 1 +spi_base = 2 +i2c_base = 3 +gpio_base = 4 * 128 +settings_base = 5 + +# GPIO offset +gpio_pins = 0 +gpio_ddr = 4 +gpio_ctrl_lo = 8 +gpio_ctrl_hi = 12 + +def set_reg(reg, val): + os.system("./usrp1-e-ctl w %d 1 %d" % (reg,val)) + +def get_reg(reg): + fin,fout = os.popen4("./usrp1-e-ctl r %d 1" % (reg,)) + print fout.read() + +# Set DDRs to output +set_reg(gpio_base+gpio_ddr, 0xFFFF) +set_reg(gpio_base+gpio_ddr+2, 0xFFFF) + +# Set CTRL to Debug #0 ( A is for debug 0, F is for debug 1 ) +set_reg(gpio_base+gpio_ctrl_lo, 0xAAAA) +set_reg(gpio_base+gpio_ctrl_lo+2, 0xAAAA) +set_reg(gpio_base+gpio_ctrl_hi, 0xAAAA) +set_reg(gpio_base+gpio_ctrl_hi+2, 0xAAAA) + diff --git a/host/apps/omap_debug/setup-board-id-eeprom.sh b/host/apps/omap_debug/setup-board-id-eeprom.sh new file mode 100755 index 000000000..4dba1cce5 --- /dev/null +++ b/host/apps/omap_debug/setup-board-id-eeprom.sh @@ -0,0 +1,17 @@ +#!/bin/sh + +i2cset -y 3 0x51 0x00 0x00 +i2cset -y 3 0x51 0x01 0x03 +i2cset -y 3 0x51 0x02 0x00 +i2cset -y 3 0x51 0x03 0x01 +i2cset -y 3 0x51 0x04 0x01 +i2cset -y 3 0x51 0x05 0x00 +i2cset -y 3 0x51 0x06 0x00 + +i2cget -y 3 0x51 0 b +i2cget -y 3 0x51 1 b +i2cget -y 3 0x51 2 b +i2cget -y 3 0x51 3 b +i2cget -y 3 0x51 4 b +i2cget -y 3 0x51 5 b +i2cget -y 3 0x51 6 b diff --git a/host/apps/omap_debug/test.c b/host/apps/omap_debug/test.c new file mode 100644 index 000000000..36f4d700a --- /dev/null +++ b/host/apps/omap_debug/test.c @@ -0,0 +1,34 @@ +#include <stdio.h> + +void +main() +{ + int x; + char *y; + long long z; + + x = 0x01020304; + z = 0x0102030405060708LL; + + printf("%x\n",x); + y = (char *)&x; + printf("%x\n",y[0]); + printf("%x\n",y[1]); + printf("%x\n",y[2]); + printf("%x\n",y[3]); + + printf("Printing z ...\n"); + printf("%llx\n",z); + printf("Printing z done\n"); + + y = (char *)&z; + printf("%x\n",y[0]); + printf("%x\n",y[1]); + printf("%x\n",y[2]); + printf("%x\n",y[3]); + printf("%x\n",y[4]); + printf("%x\n",y[5]); + printf("%x\n",y[6]); + printf("%x\n",y[7]); +} + diff --git a/host/apps/omap_debug/u1e-read-stream.c b/host/apps/omap_debug/u1e-read-stream.c new file mode 100644 index 000000000..4e4c21d9e --- /dev/null +++ b/host/apps/omap_debug/u1e-read-stream.c @@ -0,0 +1,21 @@ +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> + +int main(int rgc, char *argv[]) +{ + int fp, cnt, n; + short buf[1024]; + + n = 0; + + fp = open("/dev/usrp1_e0", O_RDONLY); + printf("fp = %d\n", fp); + + do { + cnt = read(fp, buf, 2048); + n++; +// printf("Bytes read - %d\n", cnt); + } while(n < 10*512); + printf("Data - %hX\n", buf[0]); +} diff --git a/host/apps/omap_debug/usrp-e-button.c b/host/apps/omap_debug/usrp-e-button.c new file mode 100644 index 000000000..f13291491 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-button.c @@ -0,0 +1,56 @@ +#include <stdio.h> +#include <stdlib.h> +#include <sys/types.h> +#include <fcntl.h> +#include <string.h> +#include <sys/ioctl.h> +#include <unistd.h> + +#include "usrp_e.h" +#include "usrp_e_regs.hpp" + +// Usage: usrp_e_uart <string> + +#define PB1 (1<<8) +#define PB2 (1<<9) +#define PB3 (1<<10) +#define P1 (0) +#define P2 (0xFF) +#define P3 (0xAA) +#define P4 (0x55) + +int main(int argc, char *argv[]) +{ + int fp, ret; + struct usrp_e_ctl16 d; + int pb1=0, pb2=0, pb3=0, p1=0, p2=0, p3=0, p4=0; + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + d.offset = UE_REG_MISC_SW; + d.count = 1; + + do { + ret = ioctl(fp, USRP_E_READ_CTL16, &d); + if (d.buf[0] & PB1) { + pb1 = 1; + printf("Pushbutton 1 hit\n"); + } + + if (d.buf[0] & PB2) { + pb2 = 1; + printf("Pushbutton 2 hit\n"); + } + + if (d.buf[0] & PB3) { + pb3 = 1; + printf("Pushbutton 3 hit\n"); + } + + sleep(1); + + } while (!(pb1 && pb2 && pb3)); + + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-crc-rw.c b/host/apps/omap_debug/usrp-e-crc-rw.c new file mode 100644 index 000000000..c3ae45cc1 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-crc-rw.c @@ -0,0 +1,274 @@ +#include <stdio.h> +#include <sys/types.h> +#include <sys/time.h> +#include <sys/ioctl.h> +#include <string.h> +#include <fcntl.h> +#include <pthread.h> +#include <stdlib.h> +#include <unistd.h> +#include <stddef.h> +#include "usrp_e.h" + +// max length #define PKT_DATA_LENGTH 1016 +static int packet_data_length; + +static int fp; +static u_int32_t crc_tab[256]; + +// CRC code from http://www.koders.com/c/fid699AFE0A656F0022C9D6B9D1743E697B69CE5815.aspx +// GPLv2 + +static u_int32_t chksum_crc32_gentab(void) +{ + unsigned long crc, poly; + unsigned long i, j; + + poly = 0xEDB88320L; + + for (i = 0; i < 256; i++) { + crc = i; + for (j = 8; j > 0; j--) { + if (crc & 1) { + crc = (crc >> 1) ^ poly; + } else { + crc >>= 1; + } + } + crc_tab[i] = crc; + } + + return 0; +} + +static void *read_thread(void *threadid) +{ + int cnt; + struct usrp_transfer_frame *rx_data; + int rx_pkt_cnt; + int i; + unsigned long crc; + unsigned int rx_crc; + unsigned long bytes_transfered, elapsed_seconds; + struct timeval start_time, finish_time; + + __u8 *p; + __u32 *pi; + + printf("Greetings from the reading thread!\n"); + + // IMPORTANT: must assume max length packet from fpga + rx_data = malloc(2048); + + rx_pkt_cnt = 0; + + bytes_transfered = 0; + gettimeofday(&start_time, NULL); + + while (1) { + + cnt = read(fp, rx_data, 2048); + if (cnt < 0) + printf("Error returned from read: %d\n", cnt); + + rx_pkt_cnt++; + +#if 0 + if (rx_pkt_cnt == 512) { + printf("."); + fflush(stdout); + rx_pkt_cnt = 0; + } +#endif + + if (rx_data->status & RB_OVERRUN) + printf("O"); + + printf("rx_data->len = %d\n", rx_data->len); + + + crc = 0xFFFFFFFF; + for (i = 0; i < rx_data->len - 4; i+=2) { + crc = ((crc >> 8) & 0x00FFFFFF) ^ + crc_tab[(crc ^ rx_data->buf[i+1]) & 0xFF]; +printf("idx = %d, data = %X, crc = %X\n", i, rx_data->buf[i+1],crc); + crc = ((crc >> 8) & 0x00FFFFFF) ^ + crc_tab[(crc ^ rx_data->buf[i]) & 0xFF]; +printf("idx = %d, data = %X, crc = %X\n", i, rx_data->buf[i],crc); + } + + p = &rx_data->buf[rx_data->len - 4]; + pi = (__u32 *) p; + rx_crc = *pi; + +#if 1 + printf("rx_data->len = %d\n", rx_data->len); + printf("rx_data->status = %d\n", rx_data->status); + for (i = 0; i < rx_data->len; i++) + printf("idx = %d, data = %X\n", i, rx_data->buf[i]); + printf("calc crc = %lX, rx crc = %X\n", crc, rx_crc); + fflush(stdout); + break; +#endif + + if (rx_crc != (crc & 0xFFFFFFFF)) { + printf("CRC Error, calc crc: %X, rx_crc: %X\n", + (crc & 0xFFFFFFFF), rx_crc); + } + + bytes_transfered += rx_data->len; + + if (bytes_transfered > (100 * 1000000)) { + gettimeofday(&finish_time, NULL); + elapsed_seconds = finish_time.tv_sec - start_time.tv_sec; + + printf("Bytes transfered = %ld, elapsed seconds = %ld\n", bytes_transfered, elapsed_seconds); + printf("RX data transfer rate = %f K Samples/second\n", + (float) bytes_transfered / (float) elapsed_seconds / 250); + + + start_time = finish_time; + bytes_transfered = 0; + } + } +} + +static void *write_thread(void *threadid) +{ + int seq_number, i, cnt, tx_pkt_cnt; + int tx_len; + unsigned long crc; + struct usrp_transfer_frame *tx_data; + unsigned long bytes_transfered, elapsed_seconds; + struct timeval start_time, finish_time; + + printf("Greetings from the write thread!\n"); + + tx_pkt_cnt = 0; + tx_data = malloc(2048); + + bytes_transfered = 0; + gettimeofday(&start_time, NULL); + + while (1) { + + tx_pkt_cnt++; + +#if 0 + if (tx_pkt_cnt == 512) { + printf("."); + fflush(stdout); + } + if (tx_pkt_cnt == 1024) { + printf("'"); + fflush(stdout); + } + if (tx_pkt_cnt == 1536) { + printf(":"); + fflush(stdout); + tx_pkt_cnt = 0; + } +#endif + + tx_len = 2048 - sizeof(struct usrp_transfer_frame) - sizeof(int); + tx_data->len = tx_len + sizeof(int); + + crc = 0xFFFFFFFF; + for (i = 0; i < tx_len; i++) { + tx_data->buf[i] = i & 0xFF; + + crc = ((crc >> 8) & 0x00FFFFFF) ^ + crc_tab[(crc ^ tx_data->buf[i]) & 0xFF]; + + } + *((int *) &tx_data[tx_len]) = crc; + + cnt = write(fp, tx_data, 2048); + if (cnt < 0) + printf("Error returned from write: %d\n", cnt); + + + bytes_transfered += tx_data->len; + + if (bytes_transfered > (100 * 1000000)) { + gettimeofday(&finish_time, NULL); + elapsed_seconds = finish_time.tv_sec - start_time.tv_sec; + + printf("Bytes transfered = %d, elapsed seconds = %d\n", bytes_transfered, elapsed_seconds); + printf("TX data transfer rate = %f K Samples/second\n", + (float) bytes_transfered / (float) elapsed_seconds / 250); + + + start_time = finish_time; + bytes_transfered = 0; + } + +// sleep(1); + } +} + + +int main(int argc, char *argv[]) +{ + pthread_t tx, rx; + long int t; + int fpga_config_flag ,decimation; + struct usrp_e_ctl16 d; + struct sched_param s = { + .sched_priority = 1 + }; + + if (argc < 4) { + printf("%s t|w|rw decimation data_size\n", argv[0]); + return -1; + } + + chksum_crc32_gentab(); + + decimation = atoi(argv[2]); + packet_data_length = atoi(argv[3]); + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + fpga_config_flag = 0; + if (strcmp(argv[1], "w") == 0) + fpga_config_flag |= (1 << 15); + else if (strcmp(argv[1], "r") == 0) + fpga_config_flag |= (1 << 14); + else if (strcmp(argv[1], "rw") == 0) + fpga_config_flag |= ((1 << 15) | (1 << 14)); + + fpga_config_flag |= decimation; + + d.offset = 14; + d.count = 1; + d.buf[0] = fpga_config_flag; + ioctl(fp, USRP_E_WRITE_CTL16, &d); + + sleep(1); // in case the kernel threads need time to start. FIXME if so + + sched_setscheduler(0, SCHED_RR, &s); + + if (fpga_config_flag & (1 << 14)) { + if (pthread_create(&rx, NULL, read_thread, (void *) t)) { + printf("Failed to create rx thread\n"); + exit(-1); + } + } + + sleep(1); + + if (fpga_config_flag & (1 << 15)) { + if (pthread_create(&tx, NULL, write_thread, (void *) t)) { + printf("Failed to create tx thread\n"); + exit(-1); + } + } + + sleep(10000); + + printf("Done sleeping\n"); + + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-ctl.c b/host/apps/omap_debug/usrp-e-ctl.c new file mode 100644 index 000000000..69c48ee6f --- /dev/null +++ b/host/apps/omap_debug/usrp-e-ctl.c @@ -0,0 +1,48 @@ +#include <stdio.h> +#include <stdlib.h> +#include <sys/types.h> +#include <fcntl.h> +#include <sys/ioctl.h> + +#include "usrp_e.h" + +// Usage: usrp_e_ctl w|r offset number_of_values val1 val2 .... + +int main(int argc, char *argv[]) +{ + int fp, i, cnt, ret; + struct usrp_e_ctl16 ctl_data; + + if (argc < 4) { + printf("Usage: usrp_e_ctl w|r offset number_of_values val1 val2 ....\n"); + exit(-1); + } + + cnt = atoi(argv[3]); + + ctl_data.offset = atoi(argv[2]); + ctl_data.count = cnt; + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + if (*argv[1] == 'w') { + for (i=0; i<cnt; i++) + ctl_data.buf[i] = atoi(argv[4+i]); + + ret = ioctl(fp, USRP_E_WRITE_CTL16, &ctl_data); + printf("Return value from write ioctl = %d\n", ret); + } + + if (*argv[1] == 'r') { + ret = ioctl(fp, USRP_E_READ_CTL16, &ctl_data); + printf("Return value from write ioctl = %d\n", ret); + + for (i=0; i<ctl_data.count; i++) { + if (!(i%8)) + printf("\nData at %4d :", i); + printf(" %5d", ctl_data.buf[i]); + } + printf("\n"); + } +} diff --git a/host/apps/omap_debug/usrp-e-debug-pins.c b/host/apps/omap_debug/usrp-e-debug-pins.c new file mode 100644 index 000000000..d18bbf990 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-debug-pins.c @@ -0,0 +1,77 @@ +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/types.h> +#include <fcntl.h> +#include <string.h> +#include <sys/ioctl.h> + +#include "usrp_e.h" +#include "usrp_e_regs.hpp" + +// Usage: usrp_e_gpio <string> + +static int fp; + +static int read_reg(__u16 reg) +{ + int ret; + struct usrp_e_ctl16 d; + + d.offset = reg; + d.count = 1; + ret = ioctl(fp, USRP_E_READ_CTL16, &d); + return d.buf[0]; +} + +static void write_reg(__u16 reg, __u16 val) +{ + int ret; + struct usrp_e_ctl16 d; + + d.offset = reg; + d.count = 1; + d.buf[0] = val; + ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); +} + +int main(int argc, char *argv[]) +{ + int test; + + test = 0; + if (argc < 2) { + printf("%s 0|1|off\n", argv[0]); + } + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + if (fp < 0) { + perror("Open failed"); + return -1; + } + + if (strcmp(argv[1], "0") == 0) { + printf("Selected 0 based on %s\n", argv[1]); + write_reg(UE_REG_GPIO_TX_DDR, 0xFFFF); + write_reg(UE_REG_GPIO_RX_DDR, 0xFFFF); + write_reg(UE_REG_GPIO_TX_SEL, 0x0); + write_reg(UE_REG_GPIO_RX_SEL, 0x0); + write_reg(UE_REG_GPIO_TX_DBG, 0xFFFF); + write_reg(UE_REG_GPIO_RX_DBG, 0xFFFF); + } else if (strcmp(argv[1], "1") == 0) { + printf("Selected 1 based on %s\n", argv[1]); + write_reg(UE_REG_GPIO_TX_DDR, 0xFFFF); + write_reg(UE_REG_GPIO_RX_DDR, 0xFFFF); + write_reg(UE_REG_GPIO_TX_SEL, 0xFFFF); + write_reg(UE_REG_GPIO_RX_SEL, 0xFFFF); + write_reg(UE_REG_GPIO_TX_DBG, 0xFFFF); + write_reg(UE_REG_GPIO_RX_DBG, 0xFFFF); + } else { + printf("Selected off based on %s\n", argv[1]); + write_reg(UE_REG_GPIO_TX_DDR, 0x0); + write_reg(UE_REG_GPIO_RX_DDR, 0x0); + } + + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-gpio.c b/host/apps/omap_debug/usrp-e-gpio.c new file mode 100644 index 000000000..adef877d3 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-gpio.c @@ -0,0 +1,83 @@ +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/types.h> +#include <fcntl.h> +#include <string.h> +#include <sys/ioctl.h> + +#include "usrp_e.h" +#include "usrp_e_regs.hpp" + +// Usage: usrp_e_gpio <string> + +static int fp; + +static int read_reg(__u16 reg) +{ + int ret; + struct usrp_e_ctl16 d; + + d.offset = reg; + d.count = 1; + ret = ioctl(fp, USRP_E_READ_CTL16, &d); + return d.buf[0]; +} + +static void write_reg(__u16 reg, __u16 val) +{ + int ret; + struct usrp_e_ctl16 d; + + d.offset = reg; + d.count = 1; + d.buf[0] = val; + ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); +} + +int main(int argc, char *argv[]) +{ + int i, test, data_in; + + test = 0; + if (argc > 1) + test = 1; + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + write_reg(UE_REG_GPIO_TX_DDR, 0x0); + write_reg(UE_REG_GPIO_RX_DDR, 0xFFFF); + + for (i=0; i < 16; i++) { + write_reg(UE_REG_GPIO_RX_IO, 1 << i); + sleep(1); + if (test) { + data_in = read_reg(UE_REG_GPIO_TX_IO); + if (data_in != (1 << i)) + printf("Read failed, wrote: %X read: %X\n", \ + 1 << i, data_in); + } + } + + write_reg(UE_REG_GPIO_RX_DDR, 0x0); + write_reg(UE_REG_GPIO_TX_DDR, 0xFFFF); + + sleep(1); + + for (i=0; i < 16; i++) { + write_reg(UE_REG_GPIO_TX_IO, 1 << i); + sleep(1); + if (test) { + data_in = read_reg(UE_REG_GPIO_RX_IO); + if (data_in != (1 << i)) + printf("Read failed, wrote: %X read: %X\n", \ + 1 << i, data_in); + } + } + + write_reg(UE_REG_GPIO_RX_DDR, 0x0); + write_reg(UE_REG_GPIO_TX_DDR, 0x0); + + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-i2c.c b/host/apps/omap_debug/usrp-e-i2c.c new file mode 100644 index 000000000..da8709ae1 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-i2c.c @@ -0,0 +1,87 @@ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <sys/types.h> +#include <fcntl.h> +#include <sys/ioctl.h> + +#include "usrp_e.h" + +// Usage: usrp_e_i2c w address data0 data1 data 2 .... +// Usage: usrp_e_i2c r address count + +int main(int argc, char *argv[]) +{ + int fp, ret, i, tmp; + struct usrp_e_i2c *i2c_msg; + int direction, address, count; + + if (argc < 3) { + printf("Usage: usrp-e-i2c w address data0 data1 data2 ...\n"); + printf("Usage: usrp-e-i2c r address count\n"); + printf("All addresses and data in hex.\n"); + exit(-1); + } + + if (strcmp(argv[1], "r") == 0) { + direction = 0; + } else if (strcmp(argv[1], "w") == 0) { + direction = 1; + } else { + return -1; + } + + sscanf(argv[2], "%X", &address); + printf("Address = %X\n", address); + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + if (fp < 0) { + perror("Open failed"); + return -1; + } + +// sleep(1); + + if (direction) { + count = argc - 3; + } else { + sscanf(argv[3], "%X", &count); + } + printf("Count = %X\n", count); + + i2c_msg = malloc(sizeof(i2c_msg) + count * sizeof(char)); + + i2c_msg->addr = address; + i2c_msg->len = count; + + for (i = 0; i < count; i++) { + i2c_msg->data[i] = i; + } + + if (direction) { + // Write + + for (i=0; i<count; i++) { + sscanf(argv[3+i], "%X", &tmp); + i2c_msg->data[i] = tmp; + } + + ret = ioctl(fp, USRP_E_I2C_WRITE, i2c_msg); + printf("Return value from i2c_write ioctl: %d\n", ret); + } else { + // Read + + ret = ioctl(fp, USRP_E_I2C_READ, i2c_msg); + printf("Return value from i2c_read ioctl: %d\n", ret); + + printf("Ioctl: %d Data read :", ret); + for (i=0; i<count; i++) { + printf(" %X", i2c_msg->data[i]); + } + printf("\n"); + + } + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-lb-test.c b/host/apps/omap_debug/usrp-e-lb-test.c new file mode 100644 index 000000000..68848064e --- /dev/null +++ b/host/apps/omap_debug/usrp-e-lb-test.c @@ -0,0 +1,58 @@ +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> +#include <pthread.h> +#include <stdlib.h> +#include <unistd.h> +#include <stddef.h> +#include "usrp_e.h" + +// max length #define PKT_DATA_LENGTH 1016 + +int main(int argc, char *argv[]) +{ + struct usrp_transfer_frame *tx_data, *rx_data; + int i, fp, packet_data_length, cnt; + struct usrp_e_ctl16 d; + + if (argc < 2) { + printf("%s data_size (in bytes < 2040)\n", argv[0]); + return -1; + } + + packet_data_length = atoi(argv[1]); + + fp = open("/dev/usrp_e0", O_RDWR); + + d.offset = 14; + d.count = 1; + d.buf[0] = (1 << 13); + ioctl(fp, USRP_E_WRITE_CTL16, &d); + + tx_data = malloc(2048); + rx_data = malloc(2048); + + tx_data->status = 0; + tx_data->len = sizeof(struct usrp_transfer_frame) + packet_data_length; + + while (1) { + + for (i = 0; i < packet_data_length; i++) { + tx_data->buf[i] = random() >> 24; + + } + + cnt = write(fp, tx_data, 2048); + cnt = read(fp, rx_data, 2048); + + if (tx_data->len != rx_data->len) + printf("Bad frame length sent %d, read %d\n", tx_data->len, rx_data->len); + + for (i = 0; i < packet_data_length; i++) { + if (tx_data->buf[i] != rx_data->buf[i]) + printf("Bad data at %d, sent %d, received %d\n", i, tx_data->buf[i], rx_data->buf[i]); + } + printf("---------------------------------------------------\n"); + sleep(1); + } +} diff --git a/host/apps/omap_debug/usrp-e-led.c b/host/apps/omap_debug/usrp-e-led.c new file mode 100644 index 000000000..d1b6c8996 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-led.c @@ -0,0 +1,35 @@ +#include <stdio.h> +#include <stdlib.h> +#include <sys/types.h> +#include <fcntl.h> +#include <string.h> +#include <sys/ioctl.h> +#include <unistd.h> + +#include "usrp_e.h" +#include "usrp_e_regs.hpp" + +// Usage: usrp_e_uart <string> + + +int main(int argc, char *argv[]) +{ + int fp, i, ret; + struct usrp_e_ctl16 d; + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + d.offset = UE_REG_MISC_BASE; + d.count = 1; + + while (1) { + for (i=0; i<8; i++) { + d.buf[0] = i; + ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); + sleep(1); + } + } + + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-loopback.c b/host/apps/omap_debug/usrp-e-loopback.c new file mode 100644 index 000000000..d11cf7d09 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-loopback.c @@ -0,0 +1,194 @@ +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> +#include <pthread.h> +#include <stdlib.h> +#include <unistd.h> +#include <stddef.h> +#include <sys/mman.h> +#include "usrp_e.h" + +// max length #define PKT_DATA_LENGTH 1016 +static int packet_data_length; +static int error; + +struct pkt { + int len; + int checksum; + int seq_num; + short data[]; +}; + +static int fp; + +static int calc_checksum(struct pkt *p) +{ + int i, sum; + + i = 0; + sum = 0; + + for (i=0; i < p->len; i++) + sum += p->data[i]; + + sum += p->seq_num; + sum += p->len; + + return sum; +} + +static void *read_thread(void *threadid) +{ + char *rx_data; + int cnt, prev_seq_num, pkt_count, seq_num_failure; + struct pkt *p; + unsigned long bytes_transfered, elapsed_seconds; + struct timeval start_time, finish_time; + + printf("Greetings from the reading thread!\n"); + + bytes_transfered = 0; + gettimeofday(&start_time, NULL); + + // IMPORTANT: must assume max length packet from fpga + rx_data = malloc(2048); + p = (struct pkt *) ((void *)rx_data); + + prev_seq_num = 0; + pkt_count = 0; + seq_num_failure = 0; + + while (1) { + + cnt = read(fp, rx_data, 2048); + if (cnt < 0) + printf("Error returned from read: %d, sequence number = %d\n", cnt, p->seq_num); + +// printf("p->seq_num = %d\n", p->seq_num); + + + pkt_count++; + + if (p->seq_num != prev_seq_num + 1) { + printf("Sequence number fail, current = %d, previous = %d, pkt_count = %d\n", + p->seq_num, prev_seq_num, pkt_count); + + seq_num_failure ++; + if (seq_num_failure > 2) + error = 1; + } + + prev_seq_num = p->seq_num; + + if (calc_checksum(p) != p->checksum) { + printf("Checksum fail packet = %X, expected = %X, pkt_count = %d\n", + calc_checksum(p), p->checksum, pkt_count); + error = 1; + } + + bytes_transfered += cnt; + + if (bytes_transfered > (100 * 1000000)) { + gettimeofday(&finish_time, NULL); + elapsed_seconds = finish_time.tv_sec - start_time.tv_sec; + + printf("RX data transfer rate = %f K Samples/second\n", + (float) bytes_transfered / (float) elapsed_seconds / 4000); + + + start_time = finish_time; + bytes_transfered = 0; + } + + +// printf("."); +// fflush(stdout); +// printf("\n"); + } + +} + +static void *write_thread(void *threadid) +{ + int seq_number, i, cnt; + void *tx_data; + struct pkt *p; + + printf("Greetings from the write thread!\n"); + + tx_data = malloc(2048); + p = (struct pkt *) ((void *)tx_data); + + for (i=0; i < packet_data_length; i++) +// p->data[i] = random() >> 16; + p->data[i] = i; + + seq_number = 1; + + while (1) { + p->seq_num = seq_number++; + + if (packet_data_length > 0) + p->len = packet_data_length; + else + p->len = (random() & 0x1ff) + (1004 - 512); + + p->checksum = calc_checksum(p); + + cnt = write(fp, tx_data, p->len * 2 + 12); + if (cnt < 0) + printf("Error returned from write: %d\n", cnt); +// sleep(1); + } +} + + +int main(int argc, char *argv[]) +{ + pthread_t tx, rx; + long int t; + struct sched_param s = { + .sched_priority = 1 + }; + void *rb; + struct usrp_transfer_frame *tx_rb, *rx_rb; + + if (argc < 2) { + printf("%s data_size\n", argv[0]); + return -1; + } + + packet_data_length = atoi(argv[1]); + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + rb = mmap(0, 202 * 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fp, 0); + if (!rb) { + printf("mmap failed\n"); + exit; + } + + + sched_setscheduler(0, SCHED_RR, &s); + error = 0; + +#if 1 + if (pthread_create(&rx, NULL, read_thread, (void *) t)) { + printf("Failed to create rx thread\n"); + exit(-1); + } + + sleep(1); +#endif + + if (pthread_create(&tx, NULL, write_thread, (void *) t)) { + printf("Failed to create tx thread\n"); + exit(-1); + } + +// while (!error) + sleep(1000000000); + + printf("Done sleeping\n"); +} diff --git a/host/apps/omap_debug/usrp-e-mm-loopback.c b/host/apps/omap_debug/usrp-e-mm-loopback.c new file mode 100644 index 000000000..722d09825 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-mm-loopback.c @@ -0,0 +1,231 @@ +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> +#include <pthread.h> +#include <stdlib.h> +#include <unistd.h> +#include <stddef.h> +#include <sys/mman.h> +#include <poll.h> +#include "usrp_e.h" + +// max length #define PKT_DATA_LENGTH 1016 +static int packet_data_length; +static int error; + +struct pkt { + int len; + int checksum; + int seq_num; + short data[1024-6]; +}; + +/* delete after usrp_e.h updated */ +struct ring_buffer_info { + int flags; + int len; +}; + +struct ring_buffer_info (*rxi)[]; +struct ring_buffer_info (*txi)[]; +struct pkt (*rx_buf)[200]; +struct pkt (*tx_buf)[200]; + +static int fp; + +static int calc_checksum(struct pkt *p) +{ + int i, sum; + + i = 0; + sum = 0; + + for (i=0; i < p->len; i++) + sum += p->data[i]; + + sum += p->seq_num; + sum += p->len; + + return sum; +} + +static void *read_thread(void *threadid) +{ + int cnt, prev_seq_num, pkt_count, seq_num_failure; + struct pkt *p; + unsigned long bytes_transfered, elapsed_seconds; + struct timeval start_time, finish_time; + int rb_read; + + printf("Greetings from the reading thread!\n"); + printf("sizeof pkt = %d\n", sizeof(struct pkt)); + + rb_read = 0; + + bytes_transfered = 0; + gettimeofday(&start_time, NULL); + + prev_seq_num = 0; + pkt_count = 0; + seq_num_failure = 0; + + while (1) { + + if (!((*rxi)[rb_read].flags & RB_USER)) { + printf("Waiting for data\n"); + struct pollfd pfd; + pfd.fd = fp; + pfd.events = POLLIN; + ssize_t ret = poll(&pfd, 1, -1); + } + + printf("pkt received, rb_read = %d\n", rb_read); + + cnt = (*rxi)[rb_read].len; + p = &(*rx_buf)[rb_read]; + +// cnt = read(fp, rx_data, 2048); +// if (cnt < 0) +// printf("Error returned from read: %d, sequence number = %d\n", cnt, p->seq_num); + + printf("p = %X, p->seq_num = %d p->len = %d\n", p, p->seq_num, p->len); + + + pkt_count++; + + if (p->seq_num != prev_seq_num + 1) { + printf("Sequence number fail, current = %d, previous = %d, pkt_count = %d\n", + p->seq_num, prev_seq_num, pkt_count); + + seq_num_failure ++; + if (seq_num_failure > 2) + error = 1; + } + + prev_seq_num = p->seq_num; + + if (calc_checksum(p) != p->checksum) { + printf("Checksum fail packet = %X, expected = %X, pkt_count = %d\n", + calc_checksum(p), p->checksum, pkt_count); + error = 1; + } + + (*rxi)[rb_read].flags = RB_KERNEL; + + rb_read++; + if (rb_read == 200) + rb_read = 0; + + bytes_transfered += cnt; + + if (bytes_transfered > (100 * 1000000)) { + gettimeofday(&finish_time, NULL); + elapsed_seconds = finish_time.tv_sec - start_time.tv_sec; + + printf("RX data transfer rate = %f K Samples/second\n", + (float) bytes_transfered / (float) elapsed_seconds / 4000); + + + start_time = finish_time; + bytes_transfered = 0; + } + + +// printf("."); +// fflush(stdout); +// printf("\n"); + } + +} + +static void *write_thread(void *threadid) +{ + int seq_number, i, cnt; + void *tx_data; + struct pkt *p; + + printf("Greetings from the write thread!\n"); + + tx_data = malloc(2048); + p = (struct pkt *) ((void *)tx_data); + + for (i=0; i < packet_data_length; i++) +// p->data[i] = random() >> 16; + p->data[i] = i; + + seq_number = 1; + + while (1) { + p->seq_num = seq_number++; + + if (packet_data_length > 0) + p->len = packet_data_length; + else + p->len = (random() & 0x1ff) + (1004 - 512); + + p->checksum = calc_checksum(p); + + cnt = write(fp, tx_data, p->len * 2 + 12); + if (cnt < 0) + printf("Error returned from write: %d\n", cnt); +// sleep(1); + } +} + + +int main(int argc, char *argv[]) +{ + pthread_t tx, rx; + long int t; + struct sched_param s = { + .sched_priority = 1 + }; + void *rb; + + if (argc < 2) { + printf("%s data_size\n", argv[0]); + return -1; + } + + packet_data_length = atoi(argv[1]); + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + rb = mmap(0, 202 * 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fp, 0); + if (rb == MAP_FAILED) { + perror("mmap failed"); + exit; + } + + printf("rb = %X\n", rb); + + rxi = rb; + rx_buf = rb + 4096; + txi = rb + 4096 + 4096 * 200; + tx_buf = rb + 4096 * 2 + 4096 * 200; + + printf("rxi = %X, rx_buf = %X, txi = %X, tx_buf = %X\n", rxi, rx_buf, txi, tx_buf); + + sched_setscheduler(0, SCHED_RR, &s); + error = 0; + +#if 1 + if (pthread_create(&rx, NULL, read_thread, (void *) t)) { + printf("Failed to create rx thread\n"); + exit(-1); + } + + sleep(1); +#endif + + if (pthread_create(&tx, NULL, write_thread, (void *) t)) { + printf("Failed to create tx thread\n"); + exit(-1); + } + +// while (!error) + sleep(1000000000); + + printf("Done sleeping\n"); +} diff --git a/host/apps/omap_debug/usrp-e-ram.c b/host/apps/omap_debug/usrp-e-ram.c new file mode 100644 index 000000000..d548f7ccd --- /dev/null +++ b/host/apps/omap_debug/usrp-e-ram.c @@ -0,0 +1,25 @@ +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> + +int main(int rgc, char *argv[]) +{ + int fp, i, cnt; + unsigned short buf[1024]; + unsigned short buf_rb[1024]; + + fp = open("/dev/usrp1_e0", O_RDWR); + printf("fp = %d\n", fp); + + for (i=0; i<1024; i++) + buf[i] = i*256; + write(fp, buf, 2048); + read(fp, buf_rb, 2048); + + printf("Read back %hX %hX\n", buf_rb[0], buf_rb[1]); + + for (i=0; i<1024; i++) { + if (buf[i] != buf_rb[i]) + printf("Read - %hX, expected - %hX\n", buf_rb[i], buf[i]); + } +} diff --git a/host/apps/omap_debug/usrp-e-random-loopback.c b/host/apps/omap_debug/usrp-e-random-loopback.c new file mode 100644 index 000000000..5960b8fbd --- /dev/null +++ b/host/apps/omap_debug/usrp-e-random-loopback.c @@ -0,0 +1,149 @@ +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> +#include <pthread.h> +#include <stdlib.h> +#include <unistd.h> +#include <stddef.h> +#include "usrp_e.h" + +// max length #define PKT_DATA_LENGTH 1014 +static int packet_data_length; + +struct pkt { + int checksum; + int seq_num; + int len; + short data[]; +}; + +static int fp; + +static int calc_checksum(struct pkt *p) +{ + int i, sum; + + i = 0; + sum = 0; + + for (i=0; i < p->len; i++) + sum += p->data[i]; + + sum += p->seq_num; + + return sum; +} + +int randN(int n) +{ + long tmp; + + tmp = rand() % n; + + return tmp; +} + +static void *read_thread(void *threadid) +{ + int cnt, prev_seq_num; + struct usrp_transfer_frame *rx_data; + struct pkt *p; + + printf("Greetings from the reading thread!\n"); + + // IMPORTANT: must assume max length packet from fpga + rx_data = malloc(sizeof(struct usrp_transfer_frame) + sizeof(struct pkt) + (1014 * 2)); + rx_data = malloc(2048); + p = (struct pkt *) ((void *)rx_data + offsetof(struct usrp_transfer_frame, buf)); + //p = &(rx_data->buf[0]); + printf("Address of rx_data = %p, p = %p\n", rx_data, p); + printf("offsetof = %d\n", offsetof(struct usrp_transfer_frame, buf)); + printf("sizeof rx data = %d\n", sizeof(struct usrp_transfer_frame) + sizeof(struct pkt)); + + prev_seq_num = 0; + + while (1) { + + cnt = read(fp, rx_data, 2048); +// printf("Packet received, status = %X, len = %d\n", rx_data->status, rx_data->len); +// printf("p->seq_num = %d\n", p->seq_num); + + if (p->seq_num != prev_seq_num + 1) + printf("Sequence number fail, current = %d, previous = %d\n", + p->seq_num, prev_seq_num); + prev_seq_num = p->seq_num; + + if (calc_checksum(p) != p->checksum) + printf("Checksum fail packet = %d, expected = %d\n", + calc_checksum(p), p->checksum); + printf("."); + fflush(stdout); +// printf("\n"); + } + +} + +static void *write_thread(void *threadid) +{ + int seq_number, i, cnt, pkt_cnt; + struct usrp_transfer_frame *tx_data; + struct pkt *p; + + printf("Greetings from the write thread!\n"); + + // Allocate max length buffer for frame + tx_data = malloc(2048); + p = (struct pkt *) ((void *)tx_data + offsetof(struct usrp_transfer_frame, buf)); + printf("Address of tx_data = %p, p = %p\n", tx_data, p); + + printf("sizeof rp_transfer_frame = %d, sizeof pkt = %d\n", sizeof(struct usrp_transfer_frame), sizeof(struct pkt)); + + for (i=0; i < 1014; i++) +// p->data[i] = random() >> 16; + p->data[i] = i; + + tx_data->status = 0xdeadbeef; + tx_data->len = 8 + packet_data_length * 2; + + printf("tx_data->len = %d\n", tx_data->len); + + seq_number = 1; + + while (1) { + pkt_cnt = randN(16); + for (i = 0; i < pkt_cnt; i++) { + p->seq_num = seq_number++; + p->len = randN(1013) + 1; + p->checksum = calc_checksum(p); + tx_data->len = 12 + p->len * 2; + cnt = write(fp, tx_data, tx_data->len + 8); + } + sleep(random() >> 31); + } +} + + +int main(int argc, char *argv[]) +{ + pthread_t tx, rx; + long int t; + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + if (pthread_create(&rx, NULL, read_thread, (void *) t)) { + printf("Failed to create rx thread\n"); + exit(-1); + } + + sleep(1); + + if (pthread_create(&tx, NULL, write_thread, (void *) t)) { + printf("Failed to create tx thread\n"); + exit(-1); + } + + sleep(1000000000); + + printf("Done sleeping\n"); +} diff --git a/host/apps/omap_debug/usrp-e-read.c b/host/apps/omap_debug/usrp-e-read.c new file mode 100644 index 000000000..c28f018d5 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-read.c @@ -0,0 +1,18 @@ +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> + +int main(int rgc, char *argv[]) +{ + int fp, cnt; + short buf[1024]; + + fp = open("/dev/usrp1_e0", O_RDONLY); + printf("fp = %d\n", fp); + + do { + cnt = read(fp, buf, 2048); +// printf("Bytes read - %d\n", cnt); + } while(1); + printf("Data - %hX\n", buf[0]); +} diff --git a/host/apps/omap_debug/usrp-e-spi.c b/host/apps/omap_debug/usrp-e-spi.c new file mode 100644 index 000000000..c353c409b --- /dev/null +++ b/host/apps/omap_debug/usrp-e-spi.c @@ -0,0 +1,54 @@ +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/types.h> +#include <fcntl.h> +#include <sys/ioctl.h> + +#include "usrp_e.h" + +// Usage: usrp_e_spi w|rb slave data + +int main(int argc, char *argv[]) +{ + int fp, slave, length, ret; + unsigned int data; + struct usrp_e_spi spi_dat; + + if (argc < 5) { + printf("Usage: usrp_e_spi w|rb slave transfer_length data\n"); + exit(-1); + } + + slave = atoi(argv[2]); + length = atoi(argv[3]); + data = atoll(argv[4]); + + printf("Data = %X\n", data); + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + if (fp < 0) { + perror("Open failed"); + return -1; + } + +// sleep(1); + + + spi_dat.slave = slave; + spi_dat.data = data; + spi_dat.length = length; + spi_dat.flags = UE_SPI_PUSH_FALL | UE_SPI_LATCH_RISE; + + if (*argv[1] == 'r') { + spi_dat.readback = 1; + ret = ioctl(fp, USRP_E_SPI, &spi_dat); + printf("Ioctl returns: %d, Data returned = %d\n", ret, spi_dat.data); + } else { + spi_dat.readback = 0; + ioctl(fp, USRP_E_SPI, &spi_dat); + } + + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-timed.c b/host/apps/omap_debug/usrp-e-timed.c new file mode 100644 index 000000000..3cb33ce2d --- /dev/null +++ b/host/apps/omap_debug/usrp-e-timed.c @@ -0,0 +1,233 @@ +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> +#include <pthread.h> +#include <stdlib.h> +#include <unistd.h> +#include <stddef.h> +#include "usrp_e.h" + +// max length #define PKT_DATA_LENGTH 1016 +static int packet_data_length; + +struct pkt { + int checksum; + int seq_num; + short data[]; +}; + +static int fp; + +static int calc_checksum(struct pkt *p) +{ + int i, sum; + + i = 0; + sum = 0; + + for (i=0; i < packet_data_length; i++) + sum += p->data[i]; + + sum += p->seq_num; + + return sum; +} + +static void *read_thread(void *threadid) +{ + int cnt, prev_seq_num; + struct usrp_transfer_frame *rx_data; + struct pkt *p; + int rx_pkt_cnt; + int i; + unsigned long bytes_transfered, elapsed_seconds; + struct timeval start_time, finish_time; + + printf("Greetings from the reading thread!\n"); + + bytes_transfered = 0; + gettimeofday(&start_time, NULL); + + // IMPORTANT: must assume max length packet from fpga + rx_data = malloc(sizeof(struct usrp_transfer_frame) + sizeof(struct pkt) + (1016 * 2)); + p = (struct pkt *) ((void *)rx_data + offsetof(struct usrp_transfer_frame, buf)); + //p = &(rx_data->buf[0]); + printf("Address of rx_data = %p, p = %p\n", rx_data, p); + printf("offsetof = %d\n", offsetof(struct usrp_transfer_frame, buf)); + printf("sizeof rx data = %d\n", sizeof(struct usrp_transfer_frame) + sizeof(struct pkt)); + + prev_seq_num = 0; + + rx_pkt_cnt = 0; + + while (1) { + + cnt = read(fp, rx_data, 2048); + if (cnt < 0) + printf("Error returned from read: %d\n", cnt); + rx_pkt_cnt++; + +#if 0 + if (rx_pkt_cnt == 512) { + printf("."); + fflush(stdout); + rx_pkt_cnt = 0; + } +#endif + + if (rx_data->status & RB_OVERRUN) + printf("O"); + + bytes_transfered += rx_data->len; + + if (bytes_transfered > (100 * 1000000)) { + gettimeofday(&finish_time, NULL); + elapsed_seconds = finish_time.tv_sec - start_time.tv_sec; + + printf("RX data transfer rate = %f K Samples/second\n", + (float) bytes_transfered / (float) elapsed_seconds / 4000); + + + start_time = finish_time; + bytes_transfered = 0; + } + } + +} + +static void *write_thread(void *threadid) +{ + int seq_number, i, cnt, tx_pkt_cnt; + struct usrp_transfer_frame *tx_data; + struct pkt *p; + unsigned long bytes_transfered, elapsed_seconds; + struct timeval start_time, finish_time; + + printf("Greetings from the write thread!\n"); + + bytes_transfered = 0; + gettimeofday(&start_time, NULL); + + tx_data = malloc(sizeof(struct usrp_transfer_frame) + sizeof(struct pkt) + (packet_data_length * 2)); + p = (struct pkt *) ((void *)tx_data + offsetof(struct usrp_transfer_frame, buf)); + printf("Address of tx_data = %p, p = %p\n", tx_data, p); + + printf("sizeof rp_transfer_frame = %d, sizeof pkt = %d\n", sizeof(struct usrp_transfer_frame), sizeof(struct pkt)); + + for (i=0; i < packet_data_length; i++) +// p->data[i] = random() >> 16; + p->data[i] = i; + + tx_data->status = 0; + tx_data->len = 8 + packet_data_length * 2; + + printf("tx_data->len = %d\n", tx_data->len); + + seq_number = 1; + tx_pkt_cnt = 0; + + while (1) { + + tx_pkt_cnt++; + +#if 0 + if (tx_pkt_cnt == 512) { + printf("."); + fflush(stdout); + } + if (tx_pkt_cnt == 1024) { + printf("'"); + fflush(stdout); + } + if (tx_pkt_cnt == 1536) { + printf(":"); + fflush(stdout); + tx_pkt_cnt = 0; + } +#endif + +// printf("tx status = %X, len = %d\n", tx_data->status, tx_data->len); + p->seq_num = seq_number++; + p->checksum = calc_checksum(p); + cnt = write(fp, tx_data, 2048); + if (cnt < 0) + printf("Error returned from write: %d\n", cnt); + + bytes_transfered += tx_data->len; + + if (bytes_transfered > (100 * 1000000)) { + gettimeofday(&finish_time, NULL); + elapsed_seconds = finish_time.tv_sec - start_time.tv_sec; + + printf("TX data transfer rate = %f K Samples/second\n", + (float) bytes_transfered / (float) elapsed_seconds / 4000); + + + start_time = finish_time; + bytes_transfered = 0; + } +// sleep(1); + } +} + + +int main(int argc, char *argv[]) +{ + pthread_t tx, rx; + long int t; + int fpga_config_flag ,decimation; + struct usrp_e_ctl16 d; + struct sched_param s = { + .sched_priority = 1 + }; + + if (argc < 4) { + printf("%s r|w|rw decimation data_size\n", argv[0]); + return -1; + } + + decimation = atoi(argv[2]); + packet_data_length = atoi(argv[3]); + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + fpga_config_flag = 0; + if (strcmp(argv[1], "w") == 0) + fpga_config_flag |= (1 << 15); + else if (strcmp(argv[1], "r") == 0) + fpga_config_flag |= (1 << 14); + else if (strcmp(argv[1], "rw") == 0) + fpga_config_flag |= ((1 << 15) | (1 << 14)); + + fpga_config_flag |= decimation; + + d.offset = 14; + d.count = 1; + d.buf[0] = fpga_config_flag; + ioctl(fp, USRP_E_WRITE_CTL16, &d); + + sleep(1); // in case the kernel threads need time to start. FIXME if so + + sched_setscheduler(0, SCHED_RR, &s); + + if (fpga_config_flag & (1 << 14)) { + if (pthread_create(&rx, NULL, read_thread, (void *) t)) { + printf("Failed to create rx thread\n"); + exit(-1); + } + } + + sleep(1); + + if (fpga_config_flag & (1 << 15)) { + if (pthread_create(&tx, NULL, write_thread, (void *) t)) { + printf("Failed to create tx thread\n"); + exit(-1); + } + } + + sleep(10000); + + printf("Done sleeping\n"); +} diff --git a/host/apps/omap_debug/usrp-e-uart-rx.c b/host/apps/omap_debug/usrp-e-uart-rx.c new file mode 100644 index 000000000..24b417980 --- /dev/null +++ b/host/apps/omap_debug/usrp-e-uart-rx.c @@ -0,0 +1,53 @@ +#include <stdio.h> +#include <stdlib.h> +#include <sys/types.h> +#include <fcntl.h> +#include <string.h> +#include <sys/ioctl.h> + +#include "usrp_e.h" +#include "usrp_e_regs.hpp" + +// Usage: usrp_e_uart <string> + + +int main(int argc, char *argv[]) +{ + int fp, ret; + struct usrp_e_ctl16 d; + __u16 clkdiv; + + if (argc == 0) { + printf("Usage: usrp-e-uart-rx <opt clkdiv>\n"); + printf("clkdiv = 278 is 230.4k \n"); + printf("clkdiv = 556 is 115.2k \n"); + exit(-1); + } + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + if (argc == 2) { + clkdiv = atoi(argv[1]); + d.offset = UE_REG_UART_CLKDIV; + d.count = 1; + d.buf[0] = clkdiv; + ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); + } + + while(1) { + d.offset = UE_REG_UART_RXLEVEL; + d.count = 1; + ret = ioctl(fp, USRP_E_READ_CTL16, &d); + + if (d.buf[0] > 0) { + d.offset = UE_REG_UART_RXCHAR; + d.count = 1; + ret = ioctl(fp, USRP_E_READ_CTL16, &d); + printf("%c", d.buf[0]); + fflush(stdout); + } + } + + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-uart.c b/host/apps/omap_debug/usrp-e-uart.c new file mode 100644 index 000000000..2956c407f --- /dev/null +++ b/host/apps/omap_debug/usrp-e-uart.c @@ -0,0 +1,48 @@ +#include <stdio.h> +#include <stdlib.h> +#include <sys/types.h> +#include <fcntl.h> +#include <string.h> +#include <sys/ioctl.h> + +#include "usrp_e.h" +#include "usrp_e_regs.hpp" + +// Usage: usrp_e_uart <string> + + +int main(int argc, char *argv[]) +{ + int fp, i, ret; + struct usrp_e_ctl16 d; + char *str = argv[1]; + __u16 clkdiv; + + if (argc < 2) { + printf("Usage: usrp_e_uart <string> <opt clkdiv>\n"); + printf("clkdiv = 278 is 230.4k \n"); + printf("clkdiv = 556 is 115.2k \n"); + exit(-1); + } + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + if (argc == 3) { + clkdiv = atoi(argv[2]); + d.offset = UE_REG_UART_CLKDIV; + d.count = 1; + d.buf[0] = clkdiv; + ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); + } + + for (i=0; i<strlen(str); i++) { + d.offset = UE_REG_UART_TXCHAR; + d.count = 1; + d.buf[0] = str[i]; + ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); + printf("Wrote %X, to %X, ret = %d\n", d.buf[0], d.offset, ret); + } + + return 0; +} diff --git a/host/apps/omap_debug/usrp-e-write.c b/host/apps/omap_debug/usrp-e-write.c new file mode 100644 index 000000000..903c0071f --- /dev/null +++ b/host/apps/omap_debug/usrp-e-write.c @@ -0,0 +1,21 @@ +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> + +int main(int rgc, char *argv[]) +{ + int fp, i, cnt; + short buf[1024]; + + fp = open("/dev/usrp1_e0", O_WRONLY); + printf("fp = %d\n", fp); + + for (i=0; i<1024; i++) { + buf[i] = i; + } + +// do { + cnt = write(fp, buf, 2048); + printf("Bytes written - %d\n", cnt); +// } while (1); +} diff --git a/host/apps/omap_debug/usrp_e.h b/host/apps/omap_debug/usrp_e.h new file mode 100644 index 000000000..b098ad114 --- /dev/null +++ b/host/apps/omap_debug/usrp_e.h @@ -0,0 +1,88 @@ + +/* + * Copyright (C) 2010 Ettus Research, LLC + * + * Written by Philip Balister <philip@opensdr.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __USRP_E_H +#define __USRP_E_H + +#include <linux/types.h> +#include <linux/ioctl.h> + +struct usrp_e_ctl16 { + __u32 offset; + __u32 count; + __u16 buf[20]; +}; + +struct usrp_e_ctl32 { + __u32 offset; + __u32 count; + __u32 buf[10]; +}; + +/* SPI interface */ + +#define UE_SPI_TXONLY 0 +#define UE_SPI_TXRX 1 + +/* Defines for spi ctrl register */ +#define UE_SPI_CTRL_TXNEG (1 << 10) +#define UE_SPI_CTRL_RXNEG (1 << 9) + +#define UE_SPI_PUSH_RISE 0 +#define UE_SPI_PUSH_FALL UE_SPI_CTRL_TXNEG +#define UE_SPI_LATCH_RISE 0 +#define UE_SPI_LATCH_FALL UE_SPI_CTRL_RXNEG + +struct usrp_e_spi { + __u8 readback; + __u32 slave; + __u32 data; + __u32 length; + __u32 flags; +}; + +struct usrp_e_i2c { + __u8 addr; + __u32 len; + __u8 data[]; +}; + +#define USRP_E_IOC_MAGIC 'u' +#define USRP_E_WRITE_CTL16 _IOW(USRP_E_IOC_MAGIC, 0x20, struct usrp_e_ctl16) +#define USRP_E_READ_CTL16 _IOWR(USRP_E_IOC_MAGIC, 0x21, struct usrp_e_ctl16) +#define USRP_E_WRITE_CTL32 _IOW(USRP_E_IOC_MAGIC, 0x22, struct usrp_e_ctl32) +#define USRP_E_READ_CTL32 _IOWR(USRP_E_IOC_MAGIC, 0x23, struct usrp_e_ctl32) +#define USRP_E_SPI _IOWR(USRP_E_IOC_MAGIC, 0x24, struct usrp_e_spi) +#define USRP_E_I2C_READ _IOWR(USRP_E_IOC_MAGIC, 0x25, struct usrp_e_i2c) +#define USRP_E_I2C_WRITE _IOW(USRP_E_IOC_MAGIC, 0x26, struct usrp_e_i2c) + +/* Data transfer frame definition */ + +struct usrp_transfer_frame { + __u32 status; + __u32 len; + __u8 buf[]; +}; + +/* Flag defines */ +#define RB_USER (1 << 0) +#define RB_KERNEL (1 << 1) +#define RB_OVERRUN (1 << 2) +#define RB_DMA_ACTIVE (1 << 3) + +struct ring_buffer_entry { + unsigned int flags; + unsigned long dma_addr; + struct usrp_transfer_frame *frame_addr; +}; + +#endif diff --git a/host/apps/omap_debug/write-eeprom.sh b/host/apps/omap_debug/write-eeprom.sh new file mode 100755 index 000000000..301b06f07 --- /dev/null +++ b/host/apps/omap_debug/write-eeprom.sh @@ -0,0 +1,92 @@ +#!/bin/bash + +if [ $# -ne 3 ] && [ $# -ne 5 ]; +then + echo "Usage:" + echo "" + echo "writeprom.sh deviceid rev fab_rev [envvar envsetting]" + echo + echo " deviceid - expansion board device number from table:" + echo + echo " Summit 0x01" + echo " Tobi 0x02" + echo " Tobi Duo 0x03" + echo " Palo35 0x04" + echo " Palo43 0x05" + echo " Chestnut43 0x06" + echo " Pinto 0x07" + echo + echo " rev - board revision (e.g. 0x00)" + echo " fab_rev - revision marking from pcb (e.g. R2411)" + echo " envvar - optional u-boot env variable name" + echo " (e.g. dvimode)" + echo " envsetting - optional u-boot env variable setting" + echo " (e.g. 1024x768MR-16@60)" + exit 1 +fi + +fabrevision=$3 +if [ ${#fabrevision} -ge 8 ]; then + echo "Error: fab revision string must less than 8 characters" + exit 1 +fi + +envvar=$4 +if [ ${#envar} -ge 16 ]; then + echo "Error: environment variable name string must less than 16 characters" + exit 1 +fi + +envsetting=$5 +if [ ${#ensetting} -ge 64 ]; then + echo "Error: environment setting string must less than 64 characters" + exit 1 +fi + +bus=3 +device=0x51 +vendorid=0x03 + +i2cset -y $bus $device 0x00 0x00 +i2cset -y $bus $device 0x01 $vendorid +i2cset -y $bus $device 0x02 0x00 +i2cset -y $bus $device 0x03 $1 +i2cset -y $bus $device 0x04 $2 +i2cset -y $bus $device 0x05 00 + +let i=6 +hexdumpargs="'${#fabrevision}/1 \"0x%02x \"'" +command="echo -n \"$fabrevision\" | hexdump -e $hexdumpargs" +hex=$(eval $command) +for character in $hex; do + i2cset -y $bus $device $i $character + let i=$i+1 +done +i2cset -y $bus $device $i 0x00 + +if [ $# -eq 5 ] +then + i2cset -y $bus $device 0x05 0x01 + + let i=14 + hexdumpargs="'${#envvar}/1 \"0x%02x \"'" + command="echo -n \"$envvar\" | hexdump -e $hexdumpargs" + hex=$(eval $command) + for character in $hex; do + i2cset -y $bus $device $i $character + let i=$i+1 + done + i2cset -y $bus $device $i 0x00 + + let i=30 + hexdumpargs="'${#envsetting}/1 \"0x%02x \"'" + command="echo -n \"$envsetting\" | hexdump -e $hexdumpargs" + hex=$(eval $command) + for character in $hex; do + i2cset -y $bus $device $i $character + let i=$i+1 + done + i2cset -y $bus $device $i 0x00 +fi + + diff --git a/host/apps/omap_debug/write_board_id.sh b/host/apps/omap_debug/write_board_id.sh new file mode 100755 index 000000000..067269c64 --- /dev/null +++ b/host/apps/omap_debug/write_board_id.sh @@ -0,0 +1,10 @@ +#!/bin/sh + +i2cset -y 3 0x51 0x00 0x00 +i2cset -y 3 0x51 0x01 0x03 +i2cset -y 3 0x51 0x02 0x00 +i2cset -y 3 0x51 0x03 0x01 +i2cset -y 3 0x51 0x04 0x00 +i2cset -y 3 0x51 0x05 0x00 + + diff --git a/host/examples/CMakeLists.txt b/host/examples/CMakeLists.txt index 5b241e284..7da31a16b 100644 --- a/host/examples/CMakeLists.txt +++ b/host/examples/CMakeLists.txt @@ -22,9 +22,15 @@ TARGET_LINK_LIBRARIES(benchmark_rx_rate uhd) ADD_EXECUTABLE(rx_timed_samples rx_timed_samples.cpp) TARGET_LINK_LIBRARIES(rx_timed_samples uhd) +ADD_EXECUTABLE(rx_to_file rx_to_file.cpp) +TARGET_LINK_LIBRARIES(rx_to_file uhd) + ADD_EXECUTABLE(tx_timed_samples tx_timed_samples.cpp) TARGET_LINK_LIBRARIES(tx_timed_samples uhd) +ADD_EXECUTABLE(tx_from_file tx_from_file.cpp) +TARGET_LINK_LIBRARIES(tx_from_file uhd) + ADD_EXECUTABLE(tx_waveforms tx_waveforms.cpp) TARGET_LINK_LIBRARIES(tx_waveforms uhd) @@ -35,6 +41,8 @@ INSTALL(TARGETS benchmark_rx_rate rx_timed_samples tx_timed_samples + tx_from_file + rx_to_file tx_waveforms pps_test RUNTIME DESTINATION ${PKG_DATA_DIR}/examples diff --git a/host/examples/rx_timed_samples.cpp b/host/examples/rx_timed_samples.cpp index 4856f6779..5fbf8b6c5 100644 --- a/host/examples/rx_timed_samples.cpp +++ b/host/examples/rx_timed_samples.cpp @@ -85,12 +85,12 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //loop until total number of samples reached size_t num_acc_samps = 0; //number of accumulated samples + uhd::rx_metadata_t md; + std::vector<std::complex<short> > buff(dev->get_max_recv_samps_per_packet()); while(num_acc_samps < total_num_samps){ - uhd::rx_metadata_t md; - std::vector<std::complex<float> > buff(dev->get_max_recv_samps_per_packet()); size_t num_rx_samps = dev->recv( &buff.front(), buff.size(), md, - uhd::io_type_t::COMPLEX_FLOAT32, + uhd::io_type_t::COMPLEX_INT16, uhd::device::RECV_MODE_ONE_PACKET ); diff --git a/host/examples/rx_to_file.cpp b/host/examples/rx_to_file.cpp new file mode 100644 index 000000000..79d3e9d8b --- /dev/null +++ b/host/examples/rx_to_file.cpp @@ -0,0 +1,142 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/simple_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <iostream> +#include <fstream> +#include <complex> + +namespace po = boost::program_options; + + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + time_t seconds_in_future; + size_t total_num_samps; + double rx_rate, freq; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "simple uhd device address args") + ("secs", po::value<time_t>(&seconds_in_future)->default_value(3), "number of seconds in the future to receive") + ("nsamps", po::value<size_t>(&total_num_samps)->default_value(1000), "total number of samples to receive") + ("rxrate", po::value<double>(&rx_rate)->default_value(100e6/16), "rate of incoming samples") + ("freq", po::value<double>(&freq)->default_value(0), "rf center frequency in Hz") + ("dilv", "specify to disable inner-loop verbose") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD RX Timed Samples %s") % desc << std::endl; + return ~0; + } + + bool verbose = vm.count("dilv") == 0; + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::simple_usrp::sptr sdev = uhd::usrp::simple_usrp::make(args); + uhd::device::sptr dev = sdev->get_device(); + std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl; + + //set properties on the device + std::cout << boost::format("Setting RX Rate: %f Msps...") % (rx_rate/1e6) << std::endl; + sdev->set_rx_rate(rx_rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (sdev->get_rx_rate()/1e6) << std::endl; + std::cout << boost::format("Setting device timestamp to 0...") << std::endl; + sdev->set_rx_freq(freq); + sdev->set_time_now(uhd::time_spec_t(0.0)); + + uhd::gain_range_t rx_gain = sdev->get_rx_gain_range(); + std::cout << "Setting RX Gain to: " << rx_gain.max << std::endl; + sdev->set_rx_gain(rx_gain.max); + + sleep(1); + std::cout << "LO Locked = " << sdev->get_rx_lo_locked() << std::endl; + + //setup streaming + std::cout << std::endl; + std::cout << boost::format( + "Begin streaming %u samples, %d seconds in the future..." + ) % total_num_samps % seconds_in_future << std::endl; + uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); + stream_cmd.num_samps = total_num_samps; + stream_cmd.stream_now = false; + stream_cmd.time_spec = uhd::time_spec_t(seconds_in_future); + sdev->issue_stream_cmd(stream_cmd); + + //loop until total number of samples reached + size_t num_acc_samps = 0; //number of accumulated samples + uhd::rx_metadata_t md; + std::vector<std::complex<short> > buff(dev->get_max_recv_samps_per_packet()); + std::ofstream outfile("out.dat", std::ofstream::binary); + + while(num_acc_samps < total_num_samps){ + size_t num_rx_samps = dev->recv( + &buff.front(), buff.size(), md, + uhd::io_type_t::COMPLEX_INT16, + uhd::device::RECV_MODE_ONE_PACKET + ); + + //handle the error codes + switch(md.error_code){ + case uhd::rx_metadata_t::ERROR_CODE_NONE: + break; + + case uhd::rx_metadata_t::ERROR_CODE_TIMEOUT: + if (num_acc_samps == 0) continue; + std::cout << boost::format( + "Got timeout before all samples received, possible packet loss, exiting loop..." + ) << std::endl; + goto done_loop; + + default: + std::cout << boost::format( + "Got error code 0x%x, exiting loop..." + ) % md.error_code << std::endl; + goto done_loop; + } + + outfile.write((const char*)&buff[0], num_rx_samps * sizeof(std::complex<short>)); + + if(verbose) std::cout << boost::format( + "Got packet: %u samples, %u full secs, %f frac secs" + ) % num_rx_samps % md.time_spec.get_full_secs() % md.time_spec.get_frac_secs() << std::endl; + + num_acc_samps += num_rx_samps; + } done_loop: + + outfile.close(); + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/tx_from_file.cpp b/host/examples/tx_from_file.cpp new file mode 100644 index 000000000..9611cf47c --- /dev/null +++ b/host/examples/tx_from_file.cpp @@ -0,0 +1,125 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/simple_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <iostream> +#include <complex> +#include <fstream> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + time_t seconds_in_future; + size_t total_num_samps; + size_t samps_per_packet; + double tx_rate, freq; + float ampl; + float tx_gain; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "simple uhd device address args") + ("secs", po::value<time_t>(&seconds_in_future)->default_value(3), "number of seconds in the future to transmit") + ("nsamps", po::value<size_t>(&total_num_samps)->default_value(1000), "total number of samples to transmit") + ("txrate", po::value<double>(&tx_rate)->default_value(100e6/16), "rate of outgoing samples") + ("freq", po::value<double>(&freq)->default_value(0), "rf center frequency in Hz") + ("ampl", po::value<float>(&l)->default_value(float(0.3)), "amplitude of each sample") + ("gain", po::value<float>(&tx_gain)->default_value(float(0)), "amplitude of each sample") + ("dilv", "specify to disable inner-loop verbose") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD TX Timed Samples %s") % desc << std::endl; + return ~0; + } + + bool verbose = vm.count("dilv") == 0; + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::simple_usrp::sptr sdev = uhd::usrp::simple_usrp::make(args); + uhd::device::sptr dev = sdev->get_device(); + std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl; + + //set properties on the device + std::cout << boost::format("Setting TX Rate: %f Msps...") % (tx_rate/1e6) << std::endl; + sdev->set_tx_rate(tx_rate); + std::cout << boost::format("Actual TX Rate: %f Msps...") % (sdev->get_tx_rate()/1e6) << std::endl; + std::cout << boost::format("Setting device timestamp to 0...") << std::endl; + sdev->set_tx_freq(freq); + sdev->set_time_now(uhd::time_spec_t(0.0)); + + sdev->set_tx_gain(tx_gain); + + //allocate data to send + std::vector<std::complex<short> > buff; + uhd::tx_metadata_t md; + + std::cout << "Read data to send from file: in.dat" << std::endl; + std::ifstream infile("in.dat", std::ifstream::binary); + while (!infile.eof()) { + std::complex<short> c; + infile.read((char *)&c, sizeof(std::complex<short>)); + if (!((c.real() == 0) && (c.imag() == 0))) { + buff.push_back(c); +//std::cout << "C = " << c << std::endl; + } + } + samps_per_packet = buff.size(); + infile.close(); + std::cout << "Number of samples in file: " << samps_per_packet << std::endl; + + //send the data in multiple packets + size_t num_packets = (total_num_samps+samps_per_packet-1)/samps_per_packet; + for (size_t i = 0; i < num_packets; i++){ + //setup the metadata flags and time spec + md.start_of_burst = true; //always SOB (good for continuous streaming) + md.end_of_burst = (i == num_packets-1); //only last packet has EOB + md.has_time_spec = (i == 0); //only first packet has time + md.time_spec = uhd::time_spec_t(seconds_in_future); + + size_t samps_to_send = std::min(total_num_samps - samps_per_packet*i, samps_per_packet); + + //send the entire packet (driver fragments internally) + size_t num_tx_samps = dev->send( + &buff.front(), samps_to_send, md, + uhd::io_type_t::COMPLEX_INT16, + uhd::device::SEND_MODE_FULL_BUFF + ); + if(verbose) std::cout << std::endl << boost::format("Sent %d samples") % num_tx_samps << std::endl; + } + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/tx_timed_samples.cpp b/host/examples/tx_timed_samples.cpp index 5b72bd72f..f7d7ea2ca 100644 --- a/host/examples/tx_timed_samples.cpp +++ b/host/examples/tx_timed_samples.cpp @@ -35,6 +35,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ size_t samps_per_packet; double tx_rate, freq; float ampl; + float tx_gain; //setup the program options po::options_description desc("Allowed options"); @@ -47,6 +48,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ ("txrate", po::value<double>(&tx_rate)->default_value(100e6/16), "rate of outgoing samples") ("freq", po::value<double>(&freq)->default_value(0), "rf center frequency in Hz") ("ampl", po::value<float>(&l)->default_value(float(0.3)), "amplitude of each sample") + ("gain", po::value<float>(&tx_gain)->default_value(float(0)), "TX Gain setting") ("dilv", "specify to disable inner-loop verbose") ; po::variables_map vm; @@ -75,15 +77,16 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ std::cout << boost::format("Setting device timestamp to 0...") << std::endl; sdev->set_tx_freq(freq); sdev->set_time_now(uhd::time_spec_t(0.0)); + sdev->set_tx_gain(tx_gain); //allocate data to send - std::vector<std::complex<float> > buff(samps_per_packet, std::complex<float>(ampl, ampl)); + std::vector<std::complex<short> > buff(samps_per_packet, std::complex<short>(ampl, ampl)); + uhd::tx_metadata_t md; //send the data in multiple packets size_t num_packets = (total_num_samps+samps_per_packet-1)/samps_per_packet; for (size_t i = 0; i < num_packets; i++){ //setup the metadata flags and time spec - uhd::tx_metadata_t md; md.start_of_burst = true; //always SOB (good for continuous streaming) md.end_of_burst = (i == num_packets-1); //only last packet has EOB md.has_time_spec = (i == 0); //only first packet has time @@ -94,7 +97,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ //send the entire packet (driver fragments internally) size_t num_tx_samps = dev->send( &buff.front(), samps_to_send, md, - uhd::io_type_t::COMPLEX_FLOAT32, + uhd::io_type_t::COMPLEX_INT16, uhd::device::SEND_MODE_FULL_BUFF ); if(verbose) std::cout << std::endl << boost::format("Sent %d samples") % num_tx_samps << std::endl; diff --git a/host/include/uhd/utils/pimpl.hpp b/host/include/uhd/utils/pimpl.hpp index 18454f0c4..09bf0c0a2 100644 --- a/host/include/uhd/utils/pimpl.hpp +++ b/host/include/uhd/utils/pimpl.hpp @@ -20,7 +20,6 @@ #include <uhd/config.hpp> #include <boost/shared_ptr.hpp> -#include <boost/make_shared.hpp> /*! \file pimpl.hpp * "Pimpl idiom" (pointer to implementation idiom). @@ -51,6 +50,6 @@ * \param _args the constructor args for the pimpl */ #define UHD_PIMPL_MAKE(_name, _args) \ - boost::make_shared<_name> _args + boost::shared_ptr<_name>(new _name _args) #endif /* INCLUDED_UHD_UTILS_PIMPL_HPP */ diff --git a/host/lib/usrp/CMakeLists.txt b/host/lib/usrp/CMakeLists.txt index b5c545988..8b8c18a8b 100644 --- a/host/lib/usrp/CMakeLists.txt +++ b/host/lib/usrp/CMakeLists.txt @@ -33,3 +33,4 @@ LIBUHD_APPEND_SOURCES( INCLUDE(${CMAKE_SOURCE_DIR}/lib/usrp/dboard/CMakeLists.txt) INCLUDE(${CMAKE_SOURCE_DIR}/lib/usrp/usrp1/CMakeLists.txt) INCLUDE(${CMAKE_SOURCE_DIR}/lib/usrp/usrp2/CMakeLists.txt) +INCLUDE(${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/CMakeLists.txt) diff --git a/host/lib/usrp/usrp_e/CMakeLists.txt b/host/lib/usrp/usrp_e/CMakeLists.txt new file mode 100644 index 000000000..f0c125f26 --- /dev/null +++ b/host/lib/usrp/usrp_e/CMakeLists.txt @@ -0,0 +1,50 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +#This file will be included by cmake, use absolute paths! + +######################################################################## +# Conditionally configure the USRP-E support +######################################################################## +MESSAGE(STATUS "Configuring usrp-e support...") + +INCLUDE(CheckIncludeFileCXX) +CHECK_INCLUDE_FILE_CXX(linux/usrp_e.h HAVE_LINUX_USRP_E_H) + +IF(HAVE_LINUX_USRP_E_H) + MESSAGE(STATUS " Building usrp-e support.") + LIBUHD_APPEND_SOURCES( + ${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/clock_ctrl.cpp + ${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/clock_ctrl.hpp + ${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/codec_ctrl.cpp + ${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/codec_ctrl.hpp + ${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/codec_impl.cpp + ${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/dboard_impl.cpp + ${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/dboard_iface.cpp + ${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/dsp_impl.cpp + ${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/fpga-downloader.cc + ${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/io_impl.cpp + ${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/mboard_impl.cpp + ${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/usrp_e_impl.cpp + ${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/usrp_e_impl.hpp + ${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/usrp_e_iface.cpp + ${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/usrp_e_iface.hpp + ${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e/usrp_e_regs.hpp + ) +ELSE(HAVE_LINUX_USRP_E_H) + MESSAGE(STATUS " Skipping usrp-e support.") +ENDIF(HAVE_LINUX_USRP_E_H) diff --git a/host/lib/usrp/usrp_e/clock_ctrl.cpp b/host/lib/usrp/usrp_e/clock_ctrl.cpp new file mode 100644 index 000000000..9d4625305 --- /dev/null +++ b/host/lib/usrp/usrp_e/clock_ctrl.cpp @@ -0,0 +1,237 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "clock_ctrl.hpp" +#include "ad9522_regs.hpp" +#include <uhd/utils/assert.hpp> +#include <boost/cstdint.hpp> +#include "usrp_e_regs.hpp" //spi slave constants +#include <boost/assign/list_of.hpp> +#include <boost/foreach.hpp> +#include <utility> +#include <iostream> + +using namespace uhd; + +template <typename div_type, typename bypass_type> static void set_clock_divider( + size_t divider, div_type &low, div_type &high, bypass_type &bypass +){ + high = divider/2 - 1; + low = divider - high - 2; + bypass = (divider == 1)? 1 : 0; +} + +/*********************************************************************** + * Constants + **********************************************************************/ +static const bool enable_test_clock = false; +static const size_t ref_clock_doubler = 2; //enabled below +static const double ref_clock_rate = 10e6 * ref_clock_doubler; + +static const size_t r_counter = 1; +static const size_t a_counter = 0; +static const size_t b_counter = 20 / ref_clock_doubler; +static const size_t prescaler = 8; //set below with enum, set to 8 when input is under 2400 MHz +static const size_t vco_divider = 5; //set below with enum + +static const size_t n_counter = prescaler * b_counter + a_counter; +static const size_t vco_clock_rate = ref_clock_rate/r_counter * n_counter; //between 1400 and 1800 MHz +static const double master_clock_rate = vco_clock_rate/vco_divider; + +static const size_t fpga_clock_divider = size_t(master_clock_rate/64e6); +static const size_t codec_clock_divider = size_t(master_clock_rate/64e6); + +/*********************************************************************** + * Clock Control Implementation + **********************************************************************/ +class usrp_e_clock_ctrl_impl : public usrp_e_clock_ctrl{ +public: + usrp_e_clock_ctrl_impl(usrp_e_iface::sptr iface){ + _iface = iface; + + //init the clock gen registers + //Note: out0 should already be clocking the FPGA or this isnt going to work + _ad9522_regs.sdo_active = ad9522_regs_t::SDO_ACTIVE_SDO_SDIO; + _ad9522_regs.enable_clock_doubler = 1; //enable ref clock doubler + _ad9522_regs.enb_stat_eeprom_at_stat_pin = 0; //use status pin + _ad9522_regs.status_pin_control = 0x1; //n divider + _ad9522_regs.ld_pin_control = 0x00; //dld + _ad9522_regs.refmon_pin_control = 0x12; //show ref2 + + _ad9522_regs.enable_ref2 = 1; + _ad9522_regs.enable_ref1 = 0; + _ad9522_regs.select_ref = ad9522_regs_t::SELECT_REF_REF2; + + _ad9522_regs.set_r_counter(r_counter); + _ad9522_regs.a_counter = a_counter; + _ad9522_regs.set_b_counter(b_counter); + _ad9522_regs.prescaler_p = ad9522_regs_t::PRESCALER_P_DIV8_9; + + _ad9522_regs.pll_power_down = ad9522_regs_t::PLL_POWER_DOWN_NORMAL; + _ad9522_regs.cp_current = ad9522_regs_t::CP_CURRENT_1_2MA; + + _ad9522_regs.vco_calibration_now = 1; //calibrate it! + _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV5; + _ad9522_regs.select_vco_or_clock = ad9522_regs_t::SELECT_VCO_OR_CLOCK_VCO; + + //setup fpga master clock + _ad9522_regs.out0_format = ad9522_regs_t::OUT0_FORMAT_LVDS; + set_clock_divider(fpga_clock_divider, + _ad9522_regs.divider0_low_cycles, + _ad9522_regs.divider0_high_cycles, + _ad9522_regs.divider0_bypass + ); + + //setup codec clock + _ad9522_regs.out3_format = ad9522_regs_t::OUT3_FORMAT_LVDS; + set_clock_divider(codec_clock_divider, + _ad9522_regs.divider1_low_cycles, + _ad9522_regs.divider1_high_cycles, + _ad9522_regs.divider1_bypass + ); + + //setup test clock (same divider as codec clock) + _ad9522_regs.out4_format = ad9522_regs_t::OUT4_FORMAT_CMOS; + _ad9522_regs.out4_cmos_configuration = (enable_test_clock)? + ad9522_regs_t::OUT4_CMOS_CONFIGURATION_A_ON : + ad9522_regs_t::OUT4_CMOS_CONFIGURATION_OFF; + + //setup a list of register ranges to write + typedef std::pair<boost::uint16_t, boost::uint16_t> range_t; + static const std::vector<range_t> ranges = boost::assign::list_of + (range_t(0x000, 0x000)) (range_t(0x010, 0x01F)) + (range_t(0x0F0, 0x0FD)) (range_t(0x190, 0x19B)) + (range_t(0x1E0, 0x1E1)) (range_t(0x230, 0x230)) + ; + + //write initial register values and latch/update + BOOST_FOREACH(const range_t &range, ranges){ + for(boost::uint16_t addr = range.first; addr <= range.second; addr++){ + this->send_reg(addr); + } + } + this->latch_regs(); + //test read: + //boost::uint32_t reg = _ad9522_regs.get_read_reg(0x01b); + //boost::uint32_t result = _iface->transact_spi( + // UE_SPI_SS_AD9522, + // spi_config_t::EDGE_RISE, + // reg, 24, true /*no*/ + //); + //std::cout << "result " << std::hex << result << std::endl; + this->enable_rx_dboard_clock(false); + this->enable_tx_dboard_clock(false); + } + + ~usrp_e_clock_ctrl_impl(void){ + this->enable_rx_dboard_clock(false); + this->enable_tx_dboard_clock(false); + } + + double get_fpga_clock_rate(void){ + return master_clock_rate/fpga_clock_divider; + } + + /*********************************************************************** + * RX Dboard Clock Control (output 9, divider 3) + **********************************************************************/ + void enable_rx_dboard_clock(bool enb){ + _ad9522_regs.out9_format = ad9522_regs_t::OUT9_FORMAT_CMOS; + _ad9522_regs.out9_cmos_configuration = (enb)? + ad9522_regs_t::OUT9_CMOS_CONFIGURATION_B_ON : + ad9522_regs_t::OUT9_CMOS_CONFIGURATION_OFF; + this->send_reg(0x0F9); + this->latch_regs(); + } + + std::vector<double> get_rx_dboard_clock_rates(void){ + std::vector<double> rates; + for(size_t div = 1; div <= 16+16; div++) + rates.push_back(master_clock_rate/div); + return rates; + } + + void set_rx_dboard_clock_rate(double rate){ + assert_has(get_rx_dboard_clock_rates(), rate, "rx dboard clock rate"); + size_t divider = size_t(master_clock_rate/rate); + //set the divider registers + set_clock_divider(divider, + _ad9522_regs.divider3_low_cycles, + _ad9522_regs.divider3_high_cycles, + _ad9522_regs.divider3_bypass + ); + this->send_reg(0x199); + this->send_reg(0x19a); + this->latch_regs(); + } + + /*********************************************************************** + * TX Dboard Clock Control (output 6, divider 2) + **********************************************************************/ + void enable_tx_dboard_clock(bool enb){ + _ad9522_regs.out6_format = ad9522_regs_t::OUT6_FORMAT_CMOS; + _ad9522_regs.out6_cmos_configuration = (enb)? + ad9522_regs_t::OUT6_CMOS_CONFIGURATION_B_ON : + ad9522_regs_t::OUT6_CMOS_CONFIGURATION_OFF; + this->send_reg(0x0F6); + this->latch_regs(); + } + + std::vector<double> get_tx_dboard_clock_rates(void){ + return get_rx_dboard_clock_rates(); //same master clock, same dividers... + } + + void set_tx_dboard_clock_rate(double rate){ + assert_has(get_tx_dboard_clock_rates(), rate, "tx dboard clock rate"); + size_t divider = size_t(master_clock_rate/rate); + //set the divider registers + set_clock_divider(divider, + _ad9522_regs.divider2_low_cycles, + _ad9522_regs.divider2_high_cycles, + _ad9522_regs.divider2_bypass + ); + this->send_reg(0x196); + this->send_reg(0x197); + this->latch_regs(); + } + +private: + usrp_e_iface::sptr _iface; + ad9522_regs_t _ad9522_regs; + + void latch_regs(void){ + _ad9522_regs.io_update = 1; + this->send_reg(0x232); + } + + void send_reg(boost::uint16_t addr){ + boost::uint32_t reg = _ad9522_regs.get_write_reg(addr); + //std::cout << "clock control write reg: " << std::hex << reg << std::endl; + _iface->transact_spi( + UE_SPI_SS_AD9522, + spi_config_t::EDGE_RISE, + reg, 24, false /*no rb*/ + ); + } +}; + +/*********************************************************************** + * Clock Control Make + **********************************************************************/ +usrp_e_clock_ctrl::sptr usrp_e_clock_ctrl::make(usrp_e_iface::sptr iface){ + return sptr(new usrp_e_clock_ctrl_impl(iface)); +} diff --git a/host/lib/usrp/usrp_e/clock_ctrl.hpp b/host/lib/usrp/usrp_e/clock_ctrl.hpp new file mode 100644 index 000000000..3b5103ed1 --- /dev/null +++ b/host/lib/usrp/usrp_e/clock_ctrl.hpp @@ -0,0 +1,88 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP_E_CLOCK_CTRL_HPP +#define INCLUDED_USRP_E_CLOCK_CTRL_HPP + +#include "usrp_e_iface.hpp" +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include <vector> + +/*! + * The usrp-e clock control: + * - Setup system clocks. + * - Disable/enable clock lines. + */ +class usrp_e_clock_ctrl : boost::noncopyable{ +public: + typedef boost::shared_ptr<usrp_e_clock_ctrl> sptr; + + /*! + * Make a new clock control object. + * \param iface the usrp_e iface object + * \return the clock control object + */ + static sptr make(usrp_e_iface::sptr iface); + + /*! + * Get the rate of the fpga clock line. + * \return the fpga clock rate in Hz + */ + virtual double get_fpga_clock_rate(void) = 0; + + /*! + * Get the possible rates of the rx dboard clock. + * \return a vector of clock rates in Hz + */ + virtual std::vector<double> get_rx_dboard_clock_rates(void) = 0; + + /*! + * Get the possible rates of the tx dboard clock. + * \return a vector of clock rates in Hz + */ + virtual std::vector<double> get_tx_dboard_clock_rates(void) = 0; + + /*! + * Set the rx dboard clock rate to a possible rate. + * \param rate the new clock rate in Hz + * \throw exception when rate cannot be achieved + */ + virtual void set_rx_dboard_clock_rate(double rate) = 0; + + /*! + * Set the tx dboard clock rate to a possible rate. + * \param rate the new clock rate in Hz + * \throw exception when rate cannot be achieved + */ + virtual void set_tx_dboard_clock_rate(double rate) = 0; + + /*! + * Enable/disable the rx dboard clock. + * \param enb true to enable + */ + virtual void enable_rx_dboard_clock(bool enb) = 0; + + /*! + * Enable/disable the tx dboard clock. + * \param enb true to enable + */ + virtual void enable_tx_dboard_clock(bool enb) = 0; + +}; + +#endif /* INCLUDED_USRP_E_CLOCK_CTRL_HPP */ diff --git a/host/lib/usrp/usrp_e/codec_ctrl.cpp b/host/lib/usrp/usrp_e/codec_ctrl.cpp new file mode 100644 index 000000000..a728d7e46 --- /dev/null +++ b/host/lib/usrp/usrp_e/codec_ctrl.cpp @@ -0,0 +1,296 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "codec_ctrl.hpp" +#include "ad9862_regs.hpp" +#include <uhd/types/dict.hpp> +#include <uhd/utils/assert.hpp> +#include <uhd/utils/algorithm.hpp> +#include <boost/cstdint.hpp> +#include <boost/tuple/tuple.hpp> +#include <boost/math/special_functions/round.hpp> +#include "usrp_e_regs.hpp" //spi slave constants +#include <boost/assign/list_of.hpp> +#include <iostream> + +using namespace uhd; + +static const bool codec_debug = false; + +const gain_range_t usrp_e_codec_ctrl::tx_pga_gain_range(-20, 0, float(0.1)); +const gain_range_t usrp_e_codec_ctrl::rx_pga_gain_range(0, 20, 1); + +/*********************************************************************** + * Codec Control Implementation + **********************************************************************/ +class usrp_e_codec_ctrl_impl : public usrp_e_codec_ctrl{ +public: + //structors + usrp_e_codec_ctrl_impl(usrp_e_iface::sptr iface); + ~usrp_e_codec_ctrl_impl(void); + + //aux adc and dac control + float read_aux_adc(aux_adc_t which); + void write_aux_dac(aux_dac_t which, float volts); + + //pga gain control + void set_tx_pga_gain(float); + float get_tx_pga_gain(void); + void set_rx_pga_gain(float, char); + float get_rx_pga_gain(char); + +private: + usrp_e_iface::sptr _iface; + ad9862_regs_t _ad9862_regs; + aux_adc_t _last_aux_adc_a, _last_aux_adc_b; + void send_reg(boost::uint8_t addr); + void recv_reg(boost::uint8_t addr); +}; + +/*********************************************************************** + * Codec Control Structors + **********************************************************************/ +usrp_e_codec_ctrl_impl::usrp_e_codec_ctrl_impl(usrp_e_iface::sptr iface){ + _iface = iface; + + //soft reset + _ad9862_regs.soft_reset = 1; + this->send_reg(0); + + //initialize the codec register settings + _ad9862_regs.sdio_bidir = ad9862_regs_t::SDIO_BIDIR_SDIO_SDO; + _ad9862_regs.lsb_first = ad9862_regs_t::LSB_FIRST_MSB; + _ad9862_regs.soft_reset = 0; + + //setup rx side of codec + _ad9862_regs.byp_buffer_a = 1; + _ad9862_regs.byp_buffer_b = 1; + _ad9862_regs.buffer_a_pd = 1; + _ad9862_regs.buffer_b_pd = 1; + _ad9862_regs.rx_pga_a = 0;//0x1f; //TODO bring under api control + _ad9862_regs.rx_pga_b = 0;//0x1f; //TODO bring under api control + _ad9862_regs.rx_twos_comp = 1; + _ad9862_regs.rx_hilbert = ad9862_regs_t::RX_HILBERT_DIS; + + //setup tx side of codec + _ad9862_regs.two_data_paths = ad9862_regs_t::TWO_DATA_PATHS_BOTH; + _ad9862_regs.interleaved = ad9862_regs_t::INTERLEAVED_INTERLEAVED; + _ad9862_regs.tx_retime = ad9862_regs_t::TX_RETIME_CLKOUT2; + _ad9862_regs.tx_pga_gain = 199; //TODO bring under api control + _ad9862_regs.tx_hilbert = ad9862_regs_t::TX_HILBERT_DIS; + _ad9862_regs.interp = ad9862_regs_t::INTERP_2; + _ad9862_regs.tx_twos_comp = 1; + _ad9862_regs.fine_mode = ad9862_regs_t::FINE_MODE_BYPASS; + _ad9862_regs.coarse_mod = ad9862_regs_t::COARSE_MOD_BYPASS; + _ad9862_regs.dac_a_coarse_gain = 0x3; + _ad9862_regs.dac_b_coarse_gain = 0x3; + _ad9862_regs.edges = ad9862_regs_t::EDGES_NORMAL; + + //setup the dll + _ad9862_regs.input_clk_ctrl = ad9862_regs_t::INPUT_CLK_CTRL_EXTERNAL; + _ad9862_regs.dll_mult = ad9862_regs_t::DLL_MULT_2; + _ad9862_regs.dll_mode = ad9862_regs_t::DLL_MODE_FAST; + + //write the register settings to the codec + for (uint8_t addr = 0; addr <= 25; addr++){ + this->send_reg(addr); + } + + //aux adc clock + _ad9862_regs.clk_4 = ad9862_regs_t::CLK_4_1_4; + this->send_reg(34); +} + +usrp_e_codec_ctrl_impl::~usrp_e_codec_ctrl_impl(void){ + //set aux dacs to zero + this->write_aux_dac(AUX_DAC_A, 0); + this->write_aux_dac(AUX_DAC_B, 0); + this->write_aux_dac(AUX_DAC_C, 0); + this->write_aux_dac(AUX_DAC_D, 0); + + //power down + _ad9862_regs.all_rx_pd = 1; + this->send_reg(1); + _ad9862_regs.tx_digital_pd = 1; + _ad9862_regs.tx_analog_pd = ad9862_regs_t::TX_ANALOG_PD_BOTH; + this->send_reg(8); +} + +/*********************************************************************** + * Codec Control Gain Control Methods + **********************************************************************/ +static const int mtpgw = 255; //maximum tx pga gain word + +void usrp_e_codec_ctrl_impl::set_tx_pga_gain(float gain){ + int gain_word = int(mtpgw*(gain - tx_pga_gain_range.min)/(tx_pga_gain_range.max - tx_pga_gain_range.min)); + _ad9862_regs.tx_pga_gain = std::clip(gain_word, 0, mtpgw); + this->send_reg(16); +} + +float usrp_e_codec_ctrl_impl::get_tx_pga_gain(void){ + return (_ad9862_regs.tx_pga_gain*(tx_pga_gain_range.max - tx_pga_gain_range.min)/mtpgw) + tx_pga_gain_range.min; +} + +static const int mrpgw = 0x14; //maximum rx pga gain word + +void usrp_e_codec_ctrl_impl::set_rx_pga_gain(float gain, char which){ + int gain_word = int(mrpgw*(gain - rx_pga_gain_range.min)/(rx_pga_gain_range.max - rx_pga_gain_range.min)); + gain_word = std::clip(gain_word, 0, mrpgw); + switch(which){ + case 'A': + _ad9862_regs.rx_pga_a = gain_word; + this->send_reg(2); + return; + case 'B': + _ad9862_regs.rx_pga_b = gain_word; + this->send_reg(3); + return; + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +float usrp_e_codec_ctrl_impl::get_rx_pga_gain(char which){ + int gain_word; + switch(which){ + case 'A': gain_word = _ad9862_regs.rx_pga_a; break; + case 'B': gain_word = _ad9862_regs.rx_pga_b; break; + default: UHD_THROW_INVALID_CODE_PATH(); + } + return (gain_word*(rx_pga_gain_range.max - rx_pga_gain_range.min)/mrpgw) + rx_pga_gain_range.min; +} + +/*********************************************************************** + * Codec Control AUX ADC Methods + **********************************************************************/ +static float aux_adc_to_volts(boost::uint8_t high, boost::uint8_t low){ + return float((boost::uint16_t(high) << 2) | low)*3.3/0x3ff; +} + +float usrp_e_codec_ctrl_impl::read_aux_adc(aux_adc_t which){ + //check to see if the switch needs to be set + bool write_switch = false; + switch(which){ + + case AUX_ADC_A1: + case AUX_ADC_A2: + if (which != _last_aux_adc_a){ + _ad9862_regs.select_a = (which == AUX_ADC_A1)? + ad9862_regs_t::SELECT_A_AUX_ADC1: ad9862_regs_t::SELECT_A_AUX_ADC2; + _last_aux_adc_a = which; + write_switch = true; + } + break; + + case AUX_ADC_B1: + case AUX_ADC_B2: + if (which != _last_aux_adc_b){ + _ad9862_regs.select_b = (which == AUX_ADC_B1)? + ad9862_regs_t::SELECT_B_AUX_ADC1: ad9862_regs_t::SELECT_B_AUX_ADC2; + _last_aux_adc_b = which; + write_switch = true; + } + break; + + } + + //write the switch if it changed + if(write_switch) this->send_reg(34); + + //map aux adcs to register values to read + static const uhd::dict<aux_adc_t, boost::uint8_t> aux_dac_to_addr = boost::assign::map_list_of + (AUX_ADC_A2, 26) (AUX_ADC_A1, 28) + (AUX_ADC_B2, 30) (AUX_ADC_B1, 32) + ; + + //read the value + this->recv_reg(aux_dac_to_addr[which]+0); + this->recv_reg(aux_dac_to_addr[which]+1); + + //return the value scaled to volts + switch(which){ + case AUX_ADC_A1: return aux_adc_to_volts(_ad9862_regs.aux_adc_a1_9_2, _ad9862_regs.aux_adc_a1_1_0); + case AUX_ADC_A2: return aux_adc_to_volts(_ad9862_regs.aux_adc_a2_9_2, _ad9862_regs.aux_adc_a2_1_0); + case AUX_ADC_B1: return aux_adc_to_volts(_ad9862_regs.aux_adc_b1_9_2, _ad9862_regs.aux_adc_b1_1_0); + case AUX_ADC_B2: return aux_adc_to_volts(_ad9862_regs.aux_adc_b2_9_2, _ad9862_regs.aux_adc_b2_1_0); + } + UHD_ASSERT_THROW(false); +} + +/*********************************************************************** + * Codec Control AUX DAC Methods + **********************************************************************/ +void usrp_e_codec_ctrl_impl::write_aux_dac(aux_dac_t which, float volts){ + //special case for aux dac d (aka sigma delta word) + if (which == AUX_DAC_D){ + boost::uint16_t dac_word = std::clip(boost::math::iround(volts*0xfff/3.3), 0, 0xfff); + _ad9862_regs.sig_delt_11_4 = boost::uint8_t(dac_word >> 4); + _ad9862_regs.sig_delt_3_0 = boost::uint8_t(dac_word & 0xf); + this->send_reg(42); + this->send_reg(43); + return; + } + + //calculate the dac word for aux dac a, b, c + boost::uint8_t dac_word = std::clip(boost::math::iround(volts*0xff/3.3), 0, 0xff); + + //setup a lookup table for the aux dac params (reg ref, reg addr) + typedef boost::tuple<boost::uint8_t*, boost::uint8_t> dac_params_t; + uhd::dict<aux_dac_t, dac_params_t> aux_dac_to_params = boost::assign::map_list_of + (AUX_DAC_A, dac_params_t(&_ad9862_regs.aux_dac_a, 36)) + (AUX_DAC_B, dac_params_t(&_ad9862_regs.aux_dac_b, 37)) + (AUX_DAC_C, dac_params_t(&_ad9862_regs.aux_dac_c, 38)) + ; + + //set the aux dac register + UHD_ASSERT_THROW(aux_dac_to_params.has_key(which)); + boost::uint8_t *reg_ref, reg_addr; + boost::tie(reg_ref, reg_addr) = aux_dac_to_params[which]; + *reg_ref = dac_word; + this->send_reg(reg_addr); +} + +/*********************************************************************** + * Codec Control SPI Methods + **********************************************************************/ +void usrp_e_codec_ctrl_impl::send_reg(boost::uint8_t addr){ + boost::uint32_t reg = _ad9862_regs.get_write_reg(addr); + if (codec_debug) std::cout << "codec control write reg: " << std::hex << reg << std::endl; + _iface->transact_spi( + UE_SPI_SS_AD9862, + spi_config_t::EDGE_RISE, + reg, 16, false /*no rb*/ + ); +} + +void usrp_e_codec_ctrl_impl::recv_reg(boost::uint8_t addr){ + boost::uint32_t reg = _ad9862_regs.get_read_reg(addr); + if (codec_debug) std::cout << "codec control read reg: " << std::hex << reg << std::endl; + boost::uint32_t ret = _iface->transact_spi( + UE_SPI_SS_AD9862, + spi_config_t::EDGE_RISE, + reg, 16, true /*rb*/ + ); + if (codec_debug) std::cout << "codec control read ret: " << std::hex << ret << std::endl; + _ad9862_regs.set_reg(addr, boost::uint16_t(ret)); +} + +/*********************************************************************** + * Codec Control Make + **********************************************************************/ +usrp_e_codec_ctrl::sptr usrp_e_codec_ctrl::make(usrp_e_iface::sptr iface){ + return sptr(new usrp_e_codec_ctrl_impl(iface)); +} diff --git a/host/lib/usrp/usrp_e/codec_ctrl.hpp b/host/lib/usrp/usrp_e/codec_ctrl.hpp new file mode 100644 index 000000000..87b6ff951 --- /dev/null +++ b/host/lib/usrp/usrp_e/codec_ctrl.hpp @@ -0,0 +1,90 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP_E_CODEC_CTRL_HPP +#define INCLUDED_USRP_E_CODEC_CTRL_HPP + +#include "usrp_e_iface.hpp" +#include <uhd/types/ranges.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> + +/*! + * The usrp-e codec control: + * - Init/power down codec. + * - Read aux adc, write aux dac. + */ +class usrp_e_codec_ctrl : boost::noncopyable{ +public: + typedef boost::shared_ptr<usrp_e_codec_ctrl> sptr; + + static const uhd::gain_range_t tx_pga_gain_range; + static const uhd::gain_range_t rx_pga_gain_range; + + /*! + * Make a new codec control object. + * \param iface the usrp_e iface object + * \return the codec control object + */ + static sptr make(usrp_e_iface::sptr iface); + + //! aux adc identifier constants + enum aux_adc_t{ + AUX_ADC_A2 = 0xA2, + AUX_ADC_A1 = 0xA1, + AUX_ADC_B2 = 0xB2, + AUX_ADC_B1 = 0xB1 + }; + + /*! + * Read an auxiliary adc: + * The internals remember which aux adc was read last. + * Therefore, the aux adc switch is only changed as needed. + * \param which which of the 4 adcs + * \return a value in volts + */ + virtual float read_aux_adc(aux_adc_t which) = 0; + + //! aux dac identifier constants + enum aux_dac_t{ + AUX_DAC_A = 0xA, + AUX_DAC_B = 0xB, + AUX_DAC_C = 0xC, + AUX_DAC_D = 0xD //really the sigma delta output + }; + + /*! + * Write an auxiliary dac. + * \param which which of the 4 dacs + * \param volts the level in in volts + */ + virtual void write_aux_dac(aux_dac_t which, float volts) = 0; + + //! Set the TX PGA gain + virtual void set_tx_pga_gain(float gain) = 0; + + //! Get the TX PGA gain + virtual float get_tx_pga_gain(void) = 0; + + //! Set the RX PGA gain ('A' or 'B') + virtual void set_rx_pga_gain(float gain, char which) = 0; + + //! Get the RX PGA gain ('A' or 'B') + virtual float get_rx_pga_gain(char which) = 0; +}; + +#endif /* INCLUDED_USRP_E_CODEC_CTRL_HPP */ diff --git a/host/lib/usrp/usrp_e/codec_impl.cpp b/host/lib/usrp/usrp_e/codec_impl.cpp new file mode 100644 index 000000000..696fb37ec --- /dev/null +++ b/host/lib/usrp/usrp_e/codec_impl.cpp @@ -0,0 +1,149 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e_impl.hpp" +#include <uhd/utils/assert.hpp> +#include <uhd/usrp/codec_props.hpp> +#include <boost/bind.hpp> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * Helper Methods + **********************************************************************/ +void usrp_e_impl::codec_init(void){ + //make proxies + _rx_codec_proxy = wax_obj_proxy::make( + boost::bind(&usrp_e_impl::rx_codec_get, this, _1, _2), + boost::bind(&usrp_e_impl::rx_codec_set, this, _1, _2) + ); + _tx_codec_proxy = wax_obj_proxy::make( + boost::bind(&usrp_e_impl::tx_codec_get, this, _1, _2), + boost::bind(&usrp_e_impl::tx_codec_set, this, _1, _2) + ); +} + +/*********************************************************************** + * RX Codec Properties + **********************************************************************/ +static const std::string ad9862_pga_gain_name = "ad9862 pga"; + +void usrp_e_impl::rx_codec_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<codec_prop_t>()){ + case CODEC_PROP_NAME: + val = std::string("usrp-e adc - ad9522"); + return; + + case CODEC_PROP_OTHERS: + val = prop_names_t(); + return; + + case CODEC_PROP_GAIN_NAMES: + val = prop_names_t(1, ad9862_pga_gain_name); + return; + + case CODEC_PROP_GAIN_RANGE: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + val = usrp_e_codec_ctrl::rx_pga_gain_range; + return; + + case CODEC_PROP_GAIN_I: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + val = _codec_ctrl->get_rx_pga_gain('A'); + return; + + case CODEC_PROP_GAIN_Q: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + val = _codec_ctrl->get_rx_pga_gain('B'); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void usrp_e_impl::rx_codec_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the set request conditioned on the key + switch(key.as<codec_prop_t>()){ + case CODEC_PROP_GAIN_I: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + _codec_ctrl->set_rx_pga_gain(val.as<float>(), 'A'); + return; + + case CODEC_PROP_GAIN_Q: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + _codec_ctrl->set_rx_pga_gain(val.as<float>(), 'B'); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX Codec Properties + **********************************************************************/ +void usrp_e_impl::tx_codec_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<codec_prop_t>()){ + case CODEC_PROP_NAME: + val = std::string("usrp-e dac - ad9522"); + return; + + case CODEC_PROP_OTHERS: + val = prop_names_t(); + return; + + case CODEC_PROP_GAIN_NAMES: + val = prop_names_t(1, ad9862_pga_gain_name); + return; + + case CODEC_PROP_GAIN_RANGE: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + val = usrp_e_codec_ctrl::tx_pga_gain_range; + return; + + case CODEC_PROP_GAIN_I: //only one gain for I and Q + case CODEC_PROP_GAIN_Q: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + val = _codec_ctrl->get_tx_pga_gain(); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void usrp_e_impl::tx_codec_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the set request conditioned on the key + switch(key.as<codec_prop_t>()){ + case CODEC_PROP_GAIN_I: //only one gain for I and Q + case CODEC_PROP_GAIN_Q: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + _codec_ctrl->set_tx_pga_gain(val.as<float>()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/usrp_e/dboard_iface.cpp b/host/lib/usrp/usrp_e/dboard_iface.cpp new file mode 100644 index 000000000..1bd177f60 --- /dev/null +++ b/host/lib/usrp/usrp_e/dboard_iface.cpp @@ -0,0 +1,293 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e_iface.hpp" +#include "usrp_e_regs.hpp" +#include "clock_ctrl.hpp" +#include "codec_ctrl.hpp" +#include <uhd/usrp/dboard_iface.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/utils/assert.hpp> +#include <boost/assign/list_of.hpp> +#include <linux/usrp_e.h> //i2c and spi constants + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +class usrp_e_dboard_iface : public dboard_iface{ +public: + + usrp_e_dboard_iface( + usrp_e_iface::sptr iface, + usrp_e_clock_ctrl::sptr clock, + usrp_e_codec_ctrl::sptr codec + ){ + _iface = iface; + _clock = clock; + _codec = codec; + + //init the clock rate shadows + this->set_clock_rate(UNIT_RX, _clock->get_fpga_clock_rate()); + this->set_clock_rate(UNIT_TX, _clock->get_fpga_clock_rate()); + + _iface->poke16(UE_REG_GPIO_RX_DBG, 0); + _iface->poke16(UE_REG_GPIO_TX_DBG, 0); + } + + ~usrp_e_dboard_iface(void){ + /* NOP */ + } + + special_props_t get_special_props(void){ + special_props_t props; + props.soft_clock_divider = false; + props.mangle_i2c_addrs = false; + return props; + } + + void write_aux_dac(unit_t, aux_dac_t, float); + float read_aux_adc(unit_t, aux_adc_t); + + void set_pin_ctrl(unit_t, boost::uint16_t); + void set_atr_reg(unit_t, atr_reg_t, boost::uint16_t); + void set_gpio_ddr(unit_t, boost::uint16_t); + void write_gpio(unit_t, boost::uint16_t); + void set_gpio_debug(unit_t, int); + boost::uint16_t read_gpio(unit_t); + + void write_i2c(boost::uint8_t, const byte_vector_t &); + byte_vector_t read_i2c(boost::uint8_t, size_t); + + void write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits + ); + + boost::uint32_t read_write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits + ); + + void set_clock_rate(unit_t, double); + std::vector<double> get_clock_rates(unit_t); + double get_clock_rate(unit_t); + void set_clock_enabled(unit_t, bool); + +private: + usrp_e_iface::sptr _iface; + usrp_e_clock_ctrl::sptr _clock; + usrp_e_codec_ctrl::sptr _codec; + uhd::dict<unit_t, double> _clock_rates; +}; + +/*********************************************************************** + * Make Function + **********************************************************************/ +dboard_iface::sptr make_usrp_e_dboard_iface( + usrp_e_iface::sptr iface, + usrp_e_clock_ctrl::sptr clock, + usrp_e_codec_ctrl::sptr codec +){ + return dboard_iface::sptr(new usrp_e_dboard_iface(iface, clock, codec)); +} + +/*********************************************************************** + * Clock Rates + **********************************************************************/ +void usrp_e_dboard_iface::set_clock_rate(unit_t unit, double rate){ + _clock_rates[unit] = rate; + switch(unit){ + case UNIT_RX: return _clock->set_rx_dboard_clock_rate(rate); + case UNIT_TX: return _clock->set_tx_dboard_clock_rate(rate); + } +} + +std::vector<double> usrp_e_dboard_iface::get_clock_rates(unit_t unit){ + switch(unit){ + case UNIT_RX: return _clock->get_rx_dboard_clock_rates(); + case UNIT_TX: return _clock->get_tx_dboard_clock_rates(); + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +double usrp_e_dboard_iface::get_clock_rate(unit_t unit){ + return _clock_rates[unit]; +} + +void usrp_e_dboard_iface::set_clock_enabled(unit_t unit, bool enb){ + switch(unit){ + case UNIT_RX: return _clock->enable_rx_dboard_clock(enb); + case UNIT_TX: return _clock->enable_tx_dboard_clock(enb); + } +} + +/*********************************************************************** + * GPIO + **********************************************************************/ +void usrp_e_dboard_iface::set_pin_ctrl(unit_t unit, boost::uint16_t value){ + UHD_ASSERT_THROW(GPIO_SEL_ATR == 1); //make this assumption + switch(unit){ + case UNIT_RX: _iface->poke16(UE_REG_GPIO_RX_SEL, value); return; + case UNIT_TX: _iface->poke16(UE_REG_GPIO_TX_SEL, value); return; + } +} + +void usrp_e_dboard_iface::set_gpio_ddr(unit_t unit, boost::uint16_t value){ + switch(unit){ + case UNIT_RX: _iface->poke16(UE_REG_GPIO_RX_DDR, value); return; + case UNIT_TX: _iface->poke16(UE_REG_GPIO_TX_DDR, value); return; + } +} + +void usrp_e_dboard_iface::write_gpio(unit_t unit, boost::uint16_t value){ + switch(unit){ + case UNIT_RX: _iface->poke16(UE_REG_GPIO_RX_IO, value); return; + case UNIT_TX: _iface->poke16(UE_REG_GPIO_TX_IO, value); return; + } +} + +boost::uint16_t usrp_e_dboard_iface::read_gpio(unit_t unit){ + switch(unit){ + case UNIT_RX: return _iface->peek16(UE_REG_GPIO_RX_IO); + case UNIT_TX: return _iface->peek16(UE_REG_GPIO_TX_IO); + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +void usrp_e_dboard_iface::set_atr_reg(unit_t unit, atr_reg_t atr, boost::uint16_t value){ + //define mapping of unit to atr regs to register address + static const uhd::dict< + unit_t, uhd::dict<atr_reg_t, boost::uint32_t> + > unit_to_atr_to_addr = map_list_of + (UNIT_RX, map_list_of + (ATR_REG_IDLE, UE_REG_ATR_IDLE_RXSIDE) + (ATR_REG_TX_ONLY, UE_REG_ATR_INTX_RXSIDE) + (ATR_REG_RX_ONLY, UE_REG_ATR_INRX_RXSIDE) + (ATR_REG_FULL_DUPLEX, UE_REG_ATR_FULL_RXSIDE) + ) + (UNIT_TX, map_list_of + (ATR_REG_IDLE, UE_REG_ATR_IDLE_TXSIDE) + (ATR_REG_TX_ONLY, UE_REG_ATR_INTX_TXSIDE) + (ATR_REG_RX_ONLY, UE_REG_ATR_INRX_TXSIDE) + (ATR_REG_FULL_DUPLEX, UE_REG_ATR_FULL_TXSIDE) + ) + ; + _iface->poke16(unit_to_atr_to_addr[unit][atr], value); +} + +void usrp_e_dboard_iface::set_gpio_debug(unit_t unit, int which){ + //set this unit to all outputs + this->set_gpio_ddr(unit, 0xffff); + + //calculate the debug selections + boost::uint32_t dbg_sels = 0x0; + int sel = (which == 0)? GPIO_SEL_DEBUG_0 : GPIO_SEL_DEBUG_1; + for(size_t i = 0; i < 16; i++) dbg_sels |= sel << i; + + //set the debug on and which debug selection + switch(unit){ + case UNIT_RX: + _iface->poke16(UE_REG_GPIO_RX_DBG, 0xffff); + _iface->poke16(UE_REG_GPIO_RX_SEL, dbg_sels); + return; + + case UNIT_TX: + _iface->poke16(UE_REG_GPIO_TX_DBG, 0xffff); + _iface->poke16(UE_REG_GPIO_TX_SEL, dbg_sels); + return; + } +} + +/*********************************************************************** + * SPI + **********************************************************************/ +/*! + * Static function to convert a unit type to a spi slave device number. + * \param unit the dboard interface unit type enum + * \return the slave device number + */ +static boost::uint32_t unit_to_otw_spi_dev(dboard_iface::unit_t unit){ + switch(unit){ + case dboard_iface::UNIT_TX: return UE_SPI_SS_TX_DB; + case dboard_iface::UNIT_RX: return UE_SPI_SS_RX_DB; + } + throw std::invalid_argument("unknown unit type"); +} + +void usrp_e_dboard_iface::write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits +){ + _iface->transact_spi(unit_to_otw_spi_dev(unit), config, data, num_bits, false /*no rb*/); +} + +boost::uint32_t usrp_e_dboard_iface::read_write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits +){ + return _iface->transact_spi(unit_to_otw_spi_dev(unit), config, data, num_bits, true /*rb*/); +} + +/*********************************************************************** + * I2C + **********************************************************************/ +void usrp_e_dboard_iface::write_i2c(boost::uint8_t addr, const byte_vector_t &bytes){ + return _iface->write_i2c(addr, bytes); +} + +byte_vector_t usrp_e_dboard_iface::read_i2c(boost::uint8_t addr, size_t num_bytes){ + return _iface->read_i2c(addr, num_bytes); +} + +/*********************************************************************** + * Aux DAX/ADC + **********************************************************************/ +void usrp_e_dboard_iface::write_aux_dac(dboard_iface::unit_t, aux_dac_t which, float value){ + //same aux dacs for each unit + static const uhd::dict<aux_dac_t, usrp_e_codec_ctrl::aux_dac_t> which_to_aux_dac = map_list_of + (AUX_DAC_A, usrp_e_codec_ctrl::AUX_DAC_A) + (AUX_DAC_B, usrp_e_codec_ctrl::AUX_DAC_B) + (AUX_DAC_C, usrp_e_codec_ctrl::AUX_DAC_C) + (AUX_DAC_D, usrp_e_codec_ctrl::AUX_DAC_D) + ; + _codec->write_aux_dac(which_to_aux_dac[which], value); +} + +float usrp_e_dboard_iface::read_aux_adc(dboard_iface::unit_t unit, aux_adc_t which){ + static const uhd::dict< + unit_t, uhd::dict<aux_adc_t, usrp_e_codec_ctrl::aux_adc_t> + > unit_to_which_to_aux_adc = map_list_of + (UNIT_RX, map_list_of + (AUX_ADC_A, usrp_e_codec_ctrl::AUX_ADC_A1) + (AUX_ADC_B, usrp_e_codec_ctrl::AUX_ADC_B1) + ) + (UNIT_TX, map_list_of + (AUX_ADC_A, usrp_e_codec_ctrl::AUX_ADC_A2) + (AUX_ADC_B, usrp_e_codec_ctrl::AUX_ADC_B2) + ) + ; + return _codec->read_aux_adc(unit_to_which_to_aux_adc[unit][which]); +} diff --git a/host/lib/usrp/usrp_e/dboard_impl.cpp b/host/lib/usrp/usrp_e/dboard_impl.cpp new file mode 100644 index 000000000..d4a27cb72 --- /dev/null +++ b/host/lib/usrp/usrp_e/dboard_impl.cpp @@ -0,0 +1,170 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e_impl.hpp" +#include "usrp_e_regs.hpp" +#include <uhd/utils/assert.hpp> +#include <uhd/usrp/dboard_props.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/usrp/misc_utils.hpp> +#include <boost/bind.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * Dboard Initialization + **********************************************************************/ +void usrp_e_impl::dboard_init(void){ + _rx_db_eeprom = dboard_eeprom_t(_iface->read_eeprom(I2C_ADDR_RX_DB, 0, dboard_eeprom_t::num_bytes())); + _tx_db_eeprom = dboard_eeprom_t(_iface->read_eeprom(I2C_ADDR_TX_DB, 0, dboard_eeprom_t::num_bytes())); + + //create a new dboard interface and manager + _dboard_iface = make_usrp_e_dboard_iface( + _iface, _clock_ctrl, _codec_ctrl + ); + _dboard_manager = dboard_manager::make( + _rx_db_eeprom.id, _tx_db_eeprom.id, _dboard_iface + ); + + //setup the dboard proxies + _rx_dboard_proxy = wax_obj_proxy::make( + boost::bind(&usrp_e_impl::rx_dboard_get, this, _1, _2), + boost::bind(&usrp_e_impl::rx_dboard_set, this, _1, _2) + ); + _tx_dboard_proxy = wax_obj_proxy::make( + boost::bind(&usrp_e_impl::tx_dboard_get, this, _1, _2), + boost::bind(&usrp_e_impl::tx_dboard_set, this, _1, _2) + ); +} + +/*********************************************************************** + * RX Dboard Get + **********************************************************************/ +void usrp_e_impl::rx_dboard_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_NAME: + val = std::string("usrp-e dboard (rx unit)"); + return; + + case DBOARD_PROP_SUBDEV: + val = _dboard_manager->get_rx_subdev(key.name); + return; + + case DBOARD_PROP_SUBDEV_NAMES: + val = _dboard_manager->get_rx_subdev_names(); + return; + + case DBOARD_PROP_DBOARD_ID: + val = _rx_db_eeprom.id; + return; + + case DBOARD_PROP_DBOARD_IFACE: + val = _dboard_iface; + return; + + case DBOARD_PROP_CODEC: + val = _rx_codec_proxy->get_link(); + return; + + case DBOARD_PROP_GAIN_GROUP: + val = make_gain_group( + _dboard_manager->get_rx_subdev(key.name), + _rx_codec_proxy->get_link(), + GAIN_GROUP_POLICY_RX + ); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * RX Dboard Set + **********************************************************************/ +void usrp_e_impl::rx_dboard_set(const wax::obj &key, const wax::obj &val){ + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_DBOARD_ID: + _rx_db_eeprom.id = val.as<dboard_id_t>(); + _iface->write_eeprom(I2C_ADDR_RX_DB, 0, _rx_db_eeprom.get_eeprom_bytes()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX Dboard Get + **********************************************************************/ +void usrp_e_impl::tx_dboard_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_NAME: + val = std::string("usrp-e dboard (tx unit)"); + return; + + case DBOARD_PROP_SUBDEV: + val = _dboard_manager->get_tx_subdev(key.name); + return; + + case DBOARD_PROP_SUBDEV_NAMES: + val = _dboard_manager->get_tx_subdev_names(); + return; + + case DBOARD_PROP_DBOARD_ID: + val = _tx_db_eeprom.id; + return; + + case DBOARD_PROP_DBOARD_IFACE: + val = _dboard_iface; + return; + + case DBOARD_PROP_CODEC: + val = _tx_codec_proxy->get_link(); + return; + + case DBOARD_PROP_GAIN_GROUP: + val = make_gain_group( + _dboard_manager->get_tx_subdev(key.name), + _tx_codec_proxy->get_link(), + GAIN_GROUP_POLICY_TX + ); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * TX Dboard Set + **********************************************************************/ +void usrp_e_impl::tx_dboard_set(const wax::obj &key, const wax::obj &val){ + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_DBOARD_ID: + _tx_db_eeprom.id = val.as<dboard_id_t>(); + _iface->write_eeprom(I2C_ADDR_TX_DB, 0, _tx_db_eeprom.get_eeprom_bytes()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/usrp_e/dsp_impl.cpp b/host/lib/usrp/usrp_e/dsp_impl.cpp new file mode 100644 index 000000000..c133eafae --- /dev/null +++ b/host/lib/usrp/usrp_e/dsp_impl.cpp @@ -0,0 +1,176 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e_impl.hpp" +#include "usrp_e_regs.hpp" +#include <uhd/usrp/dsp_utils.hpp> +#include <uhd/usrp/dsp_props.hpp> +#include <boost/math/special_functions/round.hpp> +#include <boost/bind.hpp> + +#define rint boost::math::iround + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * RX DDC Initialization + **********************************************************************/ +void usrp_e_impl::rx_ddc_init(void){ + _rx_ddc_proxy = wax_obj_proxy::make( + boost::bind(&usrp_e_impl::rx_ddc_get, this, _1, _2), + boost::bind(&usrp_e_impl::rx_ddc_set, this, _1, _2) + ); + + //initial config and update + rx_ddc_set(DSP_PROP_FREQ_SHIFT, double(0)); + rx_ddc_set(DSP_PROP_HOST_RATE, double(64e6/10)); +} + +/*********************************************************************** + * RX DDC Get + **********************************************************************/ +void usrp_e_impl::rx_ddc_get(const wax::obj &key, wax::obj &val){ + switch(key.as<dsp_prop_t>()){ + case DSP_PROP_NAME: + val = std::string("usrp-e ddc0"); + return; + + case DSP_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case DSP_PROP_FREQ_SHIFT: + val = _ddc_freq; + return; + + case DSP_PROP_CODEC_RATE: + val = MASTER_CLOCK_RATE; + return; + + case DSP_PROP_HOST_RATE: + val = MASTER_CLOCK_RATE/_ddc_decim; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * RX DDC Set + **********************************************************************/ +void usrp_e_impl::rx_ddc_set(const wax::obj &key, const wax::obj &val){ + switch(key.as<dsp_prop_t>()){ + + case DSP_PROP_FREQ_SHIFT:{ + double new_freq = val.as<double>(); + _iface->poke32(UE_REG_DSP_RX_FREQ, + dsp_type1::calc_cordic_word_and_update(new_freq, MASTER_CLOCK_RATE) + ); + _ddc_freq = new_freq; //shadow + } + return; + + case DSP_PROP_HOST_RATE:{ + //set the decimation + _ddc_decim = rint(MASTER_CLOCK_RATE/val.as<double>()); + _iface->poke32(UE_REG_DSP_RX_DECIM_RATE, dsp_type1::calc_cic_filter_word(_ddc_decim)); + + //set the scaling + static const boost::int16_t default_rx_scale_iq = 1024; + _iface->poke32(UE_REG_DSP_RX_SCALE_IQ, + dsp_type1::calc_iq_scale_word(default_rx_scale_iq, default_rx_scale_iq) + ); + } + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX DUC Initialization + **********************************************************************/ +void usrp_e_impl::tx_duc_init(void){ + _tx_duc_proxy = wax_obj_proxy::make( + boost::bind(&usrp_e_impl::tx_duc_get, this, _1, _2), + boost::bind(&usrp_e_impl::tx_duc_set, this, _1, _2) + ); + + //initial config and update + tx_duc_set(DSP_PROP_FREQ_SHIFT, double(0)); + tx_duc_set(DSP_PROP_HOST_RATE, double(64e6/10)); +} + +/*********************************************************************** + * TX DUC Get + **********************************************************************/ +void usrp_e_impl::tx_duc_get(const wax::obj &key, wax::obj &val){ + switch(key.as<dsp_prop_t>()){ + case DSP_PROP_NAME: + val = std::string("usrp-e duc0"); + return; + + case DSP_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case DSP_PROP_FREQ_SHIFT: + val = _duc_freq; + return; + + case DSP_PROP_CODEC_RATE: + val = MASTER_CLOCK_RATE; + return; + + case DSP_PROP_HOST_RATE: + val = MASTER_CLOCK_RATE/_duc_interp; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * TX DUC Set + **********************************************************************/ +void usrp_e_impl::tx_duc_set(const wax::obj &key, const wax::obj &val){ + switch(key.as<dsp_prop_t>()){ + + case DSP_PROP_FREQ_SHIFT:{ + double new_freq = val.as<double>(); + _iface->poke32(UE_REG_DSP_TX_FREQ, + dsp_type1::calc_cordic_word_and_update(new_freq, MASTER_CLOCK_RATE) + ); + _duc_freq = new_freq; //shadow + } + return; + + case DSP_PROP_HOST_RATE:{ + _duc_interp = rint(MASTER_CLOCK_RATE/val.as<double>()); + + //set the interpolation + _iface->poke32(UE_REG_DSP_TX_INTERP_RATE, dsp_type1::calc_cic_filter_word(_duc_interp)); + + //set the scaling + _iface->poke32(UE_REG_DSP_TX_SCALE_IQ, dsp_type1::calc_iq_scale_word(_duc_interp)); + } + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/usrp_e/fpga-downloader.cc b/host/lib/usrp/usrp_e/fpga-downloader.cc new file mode 100644 index 000000000..ff8671e98 --- /dev/null +++ b/host/lib/usrp/usrp_e/fpga-downloader.cc @@ -0,0 +1,261 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <iostream> +#include <sstream> +#include <fstream> +#include <string> +#include <cstdlib> + +#include <fcntl.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/ioctl.h> + +#include <linux/spi/spidev.h> + +/* + * Configuration connections + * + * CCK - MCSPI1_CLK + * DIN - MCSPI1_MOSI + * PROG_B - GPIO_175 - output (change mux) + * DONE - GPIO_173 - input (change mux) + * INIT_B - GPIO_114 - input (change mux) + * +*/ + +const unsigned int PROG_B = 175; +const unsigned int DONE = 173; +const unsigned int INIT_B = 114; + +//static std::string bit_file = "safe_u1e.bin"; + +const int BUF_SIZE = 4096; + +enum gpio_direction {IN, OUT}; + +class gpio { + public: + + gpio(unsigned int gpio_num, gpio_direction pin_direction); + + bool get_value(); + void set_value(bool state); + + private: + + std::stringstream base_path; + std::fstream value_file; +}; + +class spidev { + public: + + spidev(std::string dev_name); + ~spidev(); + + void send(char *wbuf, char *rbuf, unsigned int nbytes); + + private: + + int fd; + +}; + +gpio::gpio(unsigned int gpio_num, gpio_direction pin_direction) +{ + std::fstream export_file; + + export_file.open("/sys/class/gpio/export", std::ios::out); + if (!export_file.is_open()) ///\todo Poor error handling + std::cout << "Failed to open gpio export file." << std::endl; + + export_file << gpio_num << std::endl; + + base_path << "/sys/class/gpio/gpio" << gpio_num << std::flush; + + std::fstream direction_file; + std::string direction_file_name; + + direction_file_name = base_path.str() + "/direction"; + + direction_file.open(direction_file_name.c_str()); + if (!direction_file.is_open()) + std::cout << "Failed to open direction file." << std::endl; + if (pin_direction == OUT) + direction_file << "out" << std::endl; + else + direction_file << "in" << std::endl; + + std::string value_file_name; + + value_file_name = base_path.str() + "/value"; + + value_file.open(value_file_name.c_str(), std::ios_base::in | std::ios_base::out); + if (!value_file.is_open()) + std::cout << "Failed to open value file." << std::endl; +} + +bool gpio::get_value() +{ + + std::string val; + + std::getline(value_file, val); + value_file.seekg(0); + + if (val == "0") + return false; + else if (val == "1") + return true; + else + std::cout << "Data read from value file|" << val << "|" << std::endl; + + return false; +} + +void gpio::set_value(bool state) +{ + + if (state) + value_file << "1" << std::endl; + else + value_file << "0" << std::endl; +} + +static void prepare_fpga_for_configuration(gpio &prog, gpio &)//init) +{ + + prog.set_value(true); + prog.set_value(false); + prog.set_value(true); + +#if 0 + bool ready_to_program(false); + unsigned int count(0); + do { + ready_to_program = init.get_value(); + count++; + + sleep(1); + } while (count < 10 && !ready_to_program); + + if (count == 10) { + std::cout << "FPGA not ready for programming." << std::endl; + exit(-1); + } +#endif +} + +spidev::spidev(std::string fname) +{ + int ret; + int mode = 0; + int speed = 12000000; + int bits = 8; + + fd = open(fname.c_str(), O_RDWR); + + ret = ioctl(fd, SPI_IOC_WR_MODE, &mode); + ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed); + ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits); +} + + +spidev::~spidev() +{ + close(fd); +} + +void spidev::send(char *buf, char *rbuf, unsigned int nbytes) +{ + int ret; + + struct spi_ioc_transfer tr; + tr.tx_buf = (unsigned long) buf; + tr.rx_buf = (unsigned long) rbuf; + tr.len = nbytes; + tr.delay_usecs = 0; + tr.speed_hz = 48000000; + tr.bits_per_word = 8; + + ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); + +} + +static void send_file_to_fpga(const std::string &file_name, gpio &error, gpio &done) +{ + std::ifstream bitstream; + + std::cout << "File name - " << file_name.c_str() << std::endl; + + bitstream.open(file_name.c_str(), std::ios::binary); + if (!bitstream.is_open()) + std::cout << "File " << file_name << " not opened succesfully." << std::endl; + + spidev spi("/dev/spidev1.0"); + char buf[BUF_SIZE]; + char rbuf[BUF_SIZE]; + + do { + bitstream.read(buf, BUF_SIZE); + spi.send(buf, rbuf, bitstream.gcount()); + + if (error.get_value()) + std::cout << "INIT_B went high, error occured." << std::endl; + + if (!done.get_value()) + std::cout << "Configuration complete." << std::endl; + + } while (bitstream.gcount() == BUF_SIZE); +} + +/* +int main(int argc, char *argv[]) +{ + + gpio gpio_prog_b(PROG_B, OUT); + gpio gpio_init_b(INIT_B, IN); + gpio gpio_done (DONE, IN); + + if (argc == 2) + bit_file = argv[1]; + + std::cout << "FPGA config file: " << bit_file << std::endl; + + prepare_fpga_for_configuration(gpio_prog_b, gpio_init_b); + + std::cout << "Done = " << gpio_done.get_value() << std::endl; + + send_file_to_fpga(bit_file, gpio_init_b, gpio_done); +} +*/ + +void usrp_e_load_fpga(const std::string &bin_file){ + gpio gpio_prog_b(PROG_B, OUT); + gpio gpio_init_b(INIT_B, IN); + gpio gpio_done (DONE, IN); + + std::cout << "FPGA config file: " << bin_file << std::endl; + + prepare_fpga_for_configuration(gpio_prog_b, gpio_init_b); + + std::cout << "Done = " << gpio_done.get_value() << std::endl; + + send_file_to_fpga(bin_file, gpio_init_b, gpio_done); +} diff --git a/host/lib/usrp/usrp_e/io_impl.cpp b/host/lib/usrp/usrp_e/io_impl.cpp new file mode 100644 index 000000000..31ea4c6c0 --- /dev/null +++ b/host/lib/usrp/usrp_e/io_impl.cpp @@ -0,0 +1,340 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e_impl.hpp" +#include "usrp_e_regs.hpp" +#include <uhd/usrp/dsp_utils.hpp> +#include <uhd/utils/thread_priority.hpp> +#include <uhd/transport/bounded_buffer.hpp> +#include "../../transport/vrt_packet_handler.hpp" +#include <boost/bind.hpp> +#include <fcntl.h> //read, write +#include <poll.h> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; + +/*********************************************************************** + * Constants + **********************************************************************/ +static const size_t MAX_BUFF_SIZE = 2048; +static const bool usrp_e_io_impl_verbose = false; +static const size_t tx_async_report_sid = 1; +static const int underflow_flags = async_metadata_t::EVENT_CODE_UNDERFLOW | async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET; + +/*********************************************************************** + * Data Transport (phony zero-copy with read/write) + **********************************************************************/ +class data_transport: + public transport::phony_zero_copy_recv_if, + public transport::phony_zero_copy_send_if +{ +public: + data_transport(int fd): + transport::phony_zero_copy_recv_if(MAX_BUFF_SIZE), + transport::phony_zero_copy_send_if(MAX_BUFF_SIZE), + _fd(fd) + { + /* NOP */ + } + + size_t get_num_recv_frames(void) const{ + return 100; //FIXME no idea! + //this will be an important number when packet ring gets implemented + } + + size_t get_num_send_frames(void) const{ + return 100; //FIXME no idea! + //this will be an important number when packet ring gets implemented + } + +private: + int _fd; + ssize_t send(const boost::asio::const_buffer &buff){ + return write(_fd, + boost::asio::buffer_cast<const void *>(buff), + boost::asio::buffer_size(buff) + ); + } + ssize_t recv(const boost::asio::mutable_buffer &buff){ + //std::cout << boost::format( + // "calling read on fd %d, buff size is %d" + //) % _fd % boost::asio::buffer_size(buff) << std::endl; + + //setup and call poll on the file descriptor + //return 0 and do not read when poll times out + pollfd pfd; + pfd.fd = _fd; + pfd.events = POLLIN; + ssize_t poll_ret = poll(&pfd, 1, 100/*ms*/); + if (poll_ret <= 0){ + if (usrp_e_io_impl_verbose) std::cerr << boost::format( + "usrp-e io impl recv(): poll() returned non-positive value: %d\n" + " -> return 0 for timeout" + ) % poll_ret << std::endl; + return 0; //timeout + } + + //perform the blocking read(...) + ssize_t read_ret = read(_fd, + boost::asio::buffer_cast<void *>(buff), + boost::asio::buffer_size(buff) + ); + if (read_ret < 0){ + if (usrp_e_io_impl_verbose) std::cerr << boost::format( + "usrp-e io impl recv(): read() returned small value: %d\n" + " -> return -1 for error" + ) % read_ret << std::endl; + return -1; + } + + //std::cout << "len " << int(read_ret) << std::endl; + //for (size_t i = 0; i < 9; i++){ + // std::cout << boost::format(" 0x%08x") % boost::asio::buffer_cast<boost::uint32_t *>(buff)[i] << std::endl; + //} + + return read_ret; + } +}; + +/*********************************************************************** + * io impl details (internal to this file) + * - pirate crew of 1 + * - bounded buffer + * - thread loop + * - vrt packet handler states + **********************************************************************/ +struct usrp_e_impl::io_impl{ + //state management for the vrt packet handler code + vrt_packet_handler::recv_state packet_handler_recv_state; + vrt_packet_handler::send_state packet_handler_send_state; + data_transport transport; + bool continuous_streaming; + io_impl(int fd): + transport(fd), + recv_pirate_booty(recv_booty_type::make(transport.get_num_recv_frames())), + async_msg_fifo(bounded_buffer<async_metadata_t>::make(100/*messages deep*/)) + { + /* NOP */ + } + + ~io_impl(void){ + recv_pirate_crew_raiding = false; + recv_pirate_crew.interrupt_all(); + recv_pirate_crew.join_all(); + } + + bool get_recv_buffs(vrt_packet_handler::managed_recv_buffs_t &buffs, size_t timeout_ms){ + UHD_ASSERT_THROW(buffs.size() == 1); + boost::this_thread::disable_interruption di; //disable because the wait can throw + return recv_pirate_booty->pop_with_timed_wait(buffs.front(), boost::posix_time::milliseconds(timeout_ms)); + } + + //a pirate's life is the life for me! + void recv_pirate_loop(); + typedef bounded_buffer<managed_recv_buffer::sptr> recv_booty_type; + recv_booty_type::sptr recv_pirate_booty; + bounded_buffer<async_metadata_t>::sptr async_msg_fifo; + boost::thread_group recv_pirate_crew; + bool recv_pirate_crew_raiding; +}; + +/*********************************************************************** + * Receive Pirate Loop + * - while raiding, loot for recv buffers + * - put booty into the alignment buffer + **********************************************************************/ +void usrp_e_impl::io_impl::recv_pirate_loop( + +){ + set_thread_priority_safe(); + recv_pirate_crew_raiding = true; + //size_t next_packet_seq = 0; + + while(recv_pirate_crew_raiding){ + managed_recv_buffer::sptr buff = this->transport.get_recv_buff(); + if (not buff.get()) continue; //ignore timeout/error buffers + + try{ + //extract the vrt header packet info + vrt::if_packet_info_t if_packet_info; + if_packet_info.num_packet_words32 = buff->size()/sizeof(boost::uint32_t); + const boost::uint32_t *vrt_hdr = buff->cast<const boost::uint32_t *>(); + vrt::if_hdr_unpack_le(vrt_hdr, if_packet_info); + + //handle a tx async report message + if (if_packet_info.sid == tx_async_report_sid and if_packet_info.packet_type != vrt::if_packet_info_t::PACKET_TYPE_DATA){ + + //fill in the async metadata + async_metadata_t metadata; + metadata.channel = 0; + metadata.has_time_spec = if_packet_info.has_tsi and if_packet_info.has_tsf; + metadata.time_spec = time_spec_t( + time_t(if_packet_info.tsi), size_t(if_packet_info.tsf), MASTER_CLOCK_RATE + ); + metadata.event_code = vrt_packet_handler::get_context_code<async_metadata_t::event_code_t>(vrt_hdr, if_packet_info); + + //print the famous U, and push the metadata into the message queue + if (metadata.event_code & underflow_flags) std::cerr << "U" << std::flush; + async_msg_fifo->push_with_pop_on_full(metadata); + continue; + } + + }catch(const std::exception &e){ + std::cerr << "Error (usrp-e recv pirate loop): " << e.what() << std::endl; + } + + //usrp-e back-pressures on receive: push with wait + recv_pirate_booty->push_with_wait(buff); + } +} + +/*********************************************************************** + * Helper Functions + **********************************************************************/ +void usrp_e_impl::io_init(void){ + //setup rx data path + _iface->poke32(UE_REG_CTRL_RX_NSAMPS_PER_PKT, get_max_recv_samps_per_packet()); + _iface->poke32(UE_REG_CTRL_RX_NCHANNELS, 1); + _iface->poke32(UE_REG_CTRL_RX_CLEAR_OVERRUN, 1); //reset + _iface->poke32(UE_REG_CTRL_RX_VRT_HEADER, 0 + | (0x1 << 28) //if data with stream id + | (0x1 << 26) //has trailer + | (0x3 << 22) //integer time other + | (0x1 << 20) //fractional time sample count + ); + _iface->poke32(UE_REG_CTRL_RX_VRT_STREAM_ID, 0); + _iface->poke32(UE_REG_CTRL_RX_VRT_TRAILER, 0); + + //setup the tx policy + _iface->poke32(UE_REG_CTRL_TX_REPORT_SID, tx_async_report_sid); + _iface->poke32(UE_REG_CTRL_TX_POLICY, UE_FLAG_CTRL_TX_POLICY_NEXT_PACKET); + + _io_impl = UHD_PIMPL_MAKE(io_impl, (_iface->get_file_descriptor())); + + //spawn a pirate, yarrr! + _io_impl->recv_pirate_crew.create_thread(boost::bind( + &usrp_e_impl::io_impl::recv_pirate_loop, _io_impl.get() + )); +} + +void usrp_e_impl::issue_stream_cmd(const stream_cmd_t &stream_cmd){ + _io_impl->continuous_streaming = (stream_cmd.stream_mode == stream_cmd_t::STREAM_MODE_START_CONTINUOUS); + _iface->poke32(UE_REG_CTRL_RX_STREAM_CMD, dsp_type1::calc_stream_cmd_word( + stream_cmd, get_max_recv_samps_per_packet() + )); + _iface->poke32(UE_REG_CTRL_RX_TIME_SECS, boost::uint32_t(stream_cmd.time_spec.get_full_secs())); + _iface->poke32(UE_REG_CTRL_RX_TIME_TICKS, stream_cmd.time_spec.get_tick_count(MASTER_CLOCK_RATE)); +} + +void usrp_e_impl::handle_overrun(size_t){ + std::cerr << "O"; //the famous OOOOOOOOOOO + _iface->poke32(UE_REG_CTRL_RX_CLEAR_OVERRUN, 0); + if (_io_impl->continuous_streaming){ + this->issue_stream_cmd(stream_cmd_t::STREAM_MODE_START_CONTINUOUS); + } +} + +/*********************************************************************** + * Data Send + **********************************************************************/ +bool get_send_buffs( + data_transport *trans, + vrt_packet_handler::managed_send_buffs_t &buffs +){ + UHD_ASSERT_THROW(buffs.size() == 1); + buffs[0] = trans->get_send_buff(); + return buffs[0].get(); +} + +size_t usrp_e_impl::send( + const std::vector<const void *> &buffs, + size_t num_samps, + const tx_metadata_t &metadata, + const io_type_t &io_type, + send_mode_t send_mode +){ + otw_type_t send_otw_type; + send_otw_type.width = 16; + send_otw_type.shift = 0; + send_otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; + + return vrt_packet_handler::send( + _io_impl->packet_handler_send_state, //last state of the send handler + buffs, num_samps, //buffer to fill + metadata, send_mode, //samples metadata + io_type, send_otw_type, //input and output types to convert + MASTER_CLOCK_RATE, //master clock tick rate + uhd::transport::vrt::if_hdr_pack_le, + boost::bind(&get_send_buffs, &_io_impl->transport, _1), + get_max_send_samps_per_packet() + ); +} + +/*********************************************************************** + * Data Recv + **********************************************************************/ +bool get_recv_buffs( + data_transport *trans, + vrt_packet_handler::managed_recv_buffs_t &buffs +){ + UHD_ASSERT_THROW(buffs.size() == 1); + buffs[0] = trans->get_recv_buff(); + return buffs[0].get(); +} + +size_t usrp_e_impl::recv( + const std::vector<void *> &buffs, + size_t num_samps, + rx_metadata_t &metadata, + const io_type_t &io_type, + recv_mode_t recv_mode, + size_t timeout_ms +){ + otw_type_t recv_otw_type; + recv_otw_type.width = 16; + recv_otw_type.shift = 0; + recv_otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; + + return vrt_packet_handler::recv( + _io_impl->packet_handler_recv_state, //last state of the recv handler + buffs, num_samps, //buffer to fill + metadata, recv_mode, //samples metadata + io_type, recv_otw_type, //input and output types to convert + MASTER_CLOCK_RATE, //master clock tick rate + uhd::transport::vrt::if_hdr_unpack_le, + boost::bind(&usrp_e_impl::io_impl::get_recv_buffs, _io_impl.get(), _1, timeout_ms), + boost::bind(&usrp_e_impl::handle_overrun, this, _1) + ); +} + +/*********************************************************************** + * Async Recv + **********************************************************************/ +bool usrp_e_impl::recv_async_msg( + async_metadata_t &async_metadata, + size_t timeout_ms +){ + boost::this_thread::disable_interruption di; //disable because the wait can throw + return _io_impl->async_msg_fifo->pop_with_timed_wait( + async_metadata, boost::posix_time::milliseconds(timeout_ms) + ); +} diff --git a/host/lib/usrp/usrp_e/mboard_impl.cpp b/host/lib/usrp/usrp_e/mboard_impl.cpp new file mode 100644 index 000000000..3d4cef069 --- /dev/null +++ b/host/lib/usrp/usrp_e/mboard_impl.cpp @@ -0,0 +1,159 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e_impl.hpp" +#include "usrp_e_regs.hpp" +#include <uhd/usrp/dsp_utils.hpp> +#include <uhd/usrp/misc_utils.hpp> +#include <uhd/utils/assert.hpp> +#include <uhd/usrp/mboard_props.hpp> +#include <boost/bind.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * Mboard Initialization + **********************************************************************/ +void usrp_e_impl::mboard_init(void){ + _mboard_proxy = wax_obj_proxy::make( + boost::bind(&usrp_e_impl::mboard_get, this, _1, _2), + boost::bind(&usrp_e_impl::mboard_set, this, _1, _2) + ); + + //init the clock config + _clock_config.ref_source = clock_config_t::REF_AUTO; + _clock_config.pps_source = clock_config_t::PPS_SMA; + + //TODO poke the clock config regs +} + +/*********************************************************************** + * Mboard Get + **********************************************************************/ +void usrp_e_impl::mboard_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<mboard_prop_t>()){ + case MBOARD_PROP_NAME: + val = std::string("usrp-e mboard"); + return; + + case MBOARD_PROP_OTHERS: + val = prop_names_t(); + return; + + case MBOARD_PROP_RX_DBOARD: + UHD_ASSERT_THROW(key.name == ""); + val = _rx_dboard_proxy->get_link(); + return; + + case MBOARD_PROP_RX_DBOARD_NAMES: + val = prop_names_t(1, ""); //vector of size 1 with empty string + return; + + case MBOARD_PROP_TX_DBOARD: + UHD_ASSERT_THROW(key.name == ""); + val = _tx_dboard_proxy->get_link(); + return; + + case MBOARD_PROP_TX_DBOARD_NAMES: + val = prop_names_t(1, ""); //vector of size 1 with empty string + return; + + case MBOARD_PROP_RX_DSP: + UHD_ASSERT_THROW(key.name == ""); + val = _rx_ddc_proxy->get_link(); + return; + + case MBOARD_PROP_RX_DSP_NAMES: + val = prop_names_t(1, ""); + return; + + case MBOARD_PROP_TX_DSP: + UHD_ASSERT_THROW(key.name == ""); + val = _tx_duc_proxy->get_link(); + return; + + case MBOARD_PROP_TX_DSP_NAMES: + val = prop_names_t(1, ""); + return; + + case MBOARD_PROP_CLOCK_CONFIG: + val = _clock_config; + return; + + case MBOARD_PROP_RX_SUBDEV_SPEC: + val = _rx_subdev_spec; + return; + + case MBOARD_PROP_TX_SUBDEV_SPEC: + val = _tx_subdev_spec; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * Mboard Set + **********************************************************************/ +void usrp_e_impl::mboard_set(const wax::obj &key, const wax::obj &val){ + //handle the get request conditioned on the key + switch(key.as<mboard_prop_t>()){ + + case MBOARD_PROP_STREAM_CMD: + issue_stream_cmd(val.as<stream_cmd_t>()); + return; + + case MBOARD_PROP_TIME_NOW: + case MBOARD_PROP_TIME_NEXT_PPS:{ + time_spec_t time_spec = val.as<time_spec_t>(); + _iface->poke32(UE_REG_TIME64_TICKS, time_spec.get_tick_count(MASTER_CLOCK_RATE)); + boost::uint32_t imm_flags = (key.as<mboard_prop_t>() == MBOARD_PROP_TIME_NOW)? 1 : 0; + _iface->poke32(UE_REG_TIME64_IMM, imm_flags); + _iface->poke32(UE_REG_TIME64_SECS, time_spec.get_full_secs()); + } + return; + + case MBOARD_PROP_RX_SUBDEV_SPEC: + _rx_subdev_spec = val.as<subdev_spec_t>(); + verify_rx_subdev_spec(_rx_subdev_spec, _mboard_proxy->get_link()); + //sanity check + UHD_ASSERT_THROW(_rx_subdev_spec.size() == 1); + //set the mux + _iface->poke32(UE_REG_DSP_RX_MUX, dsp_type1::calc_rx_mux_word( + _dboard_manager->get_rx_subdev(_rx_subdev_spec.front().sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() + )); + return; + + case MBOARD_PROP_TX_SUBDEV_SPEC: + _tx_subdev_spec = val.as<subdev_spec_t>(); + verify_tx_subdev_spec(_tx_subdev_spec, _mboard_proxy->get_link()); + //sanity check + UHD_ASSERT_THROW(_tx_subdev_spec.size() == 1); + //set the mux + _iface->poke32(UE_REG_DSP_TX_MUX, dsp_type1::calc_tx_mux_word( + _dboard_manager->get_tx_subdev(_tx_subdev_spec.front().sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() + )); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/usrp_e/usrp_e_iface.cpp b/host/lib/usrp/usrp_e/usrp_e_iface.cpp new file mode 100644 index 000000000..f00e92946 --- /dev/null +++ b/host/lib/usrp/usrp_e/usrp_e_iface.cpp @@ -0,0 +1,194 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e_iface.hpp" +#include <uhd/utils/assert.hpp> +#include <sys/ioctl.h> //ioctl +#include <fcntl.h> //open, close +#include <linux/usrp_e.h> //ioctl structures and constants +#include <boost/format.hpp> +#include <boost/thread.hpp> //mutex +#include <stdexcept> + +using namespace uhd; + +class usrp_e_iface_impl : public usrp_e_iface{ +public: + + int get_file_descriptor(void){ + return _node_fd; + } + + /******************************************************************* + * Structors + ******************************************************************/ + usrp_e_iface_impl(const std::string &node){ + //open the device node and check file descriptor + if ((_node_fd = ::open(node.c_str(), O_RDWR)) < 0){ + throw std::runtime_error(str( + boost::format("Failed to open %s") % node + )); + } + } + + ~usrp_e_iface_impl(void){ + //close the device node file descriptor + ::close(_node_fd); + } + + /******************************************************************* + * IOCTL: provides the communication base for all other calls + ******************************************************************/ + void ioctl(int request, void *mem){ + boost::mutex::scoped_lock lock(_ctrl_mutex); + + if (::ioctl(_node_fd, request, mem) < 0){ + throw std::runtime_error(str( + boost::format("ioctl failed with request %d") % request + )); + } + } + + /******************************************************************* + * Peek and Poke + ******************************************************************/ + void poke32(boost::uint32_t addr, boost::uint32_t value){ + //load the data struct + usrp_e_ctl32 data; + data.offset = addr; + data.count = 1; + data.buf[0] = value; + + //call the ioctl + this->ioctl(USRP_E_WRITE_CTL32, &data); + } + + void poke16(boost::uint32_t addr, boost::uint16_t value){ + //load the data struct + usrp_e_ctl16 data; + data.offset = addr; + data.count = 1; + data.buf[0] = value; + + //call the ioctl + this->ioctl(USRP_E_WRITE_CTL16, &data); + } + + boost::uint32_t peek32(boost::uint32_t addr){ + //load the data struct + usrp_e_ctl32 data; + data.offset = addr; + data.count = 1; + + //call the ioctl + this->ioctl(USRP_E_READ_CTL32, &data); + + return data.buf[0]; + } + + boost::uint16_t peek16(boost::uint32_t addr){ + //load the data struct + usrp_e_ctl16 data; + data.offset = addr; + data.count = 1; + + //call the ioctl + this->ioctl(USRP_E_READ_CTL16, &data); + + return data.buf[0]; + } + + /******************************************************************* + * I2C + ******************************************************************/ + static const size_t max_i2c_data_bytes = 10; + + void write_i2c(boost::uint8_t addr, const byte_vector_t &bytes){ + //allocate some memory for this transaction + UHD_ASSERT_THROW(bytes.size() <= max_i2c_data_bytes); + boost::uint8_t mem[sizeof(usrp_e_i2c) + max_i2c_data_bytes]; + + //load the data struct + usrp_e_i2c *data = reinterpret_cast<usrp_e_i2c*>(mem); + data->addr = addr; + data->len = bytes.size(); + std::copy(bytes.begin(), bytes.end(), data->data); + + //call the spi ioctl + this->ioctl(USRP_E_I2C_WRITE, data); + } + + byte_vector_t read_i2c(boost::uint8_t addr, size_t num_bytes){ + //allocate some memory for this transaction + UHD_ASSERT_THROW(num_bytes <= max_i2c_data_bytes); + boost::uint8_t mem[sizeof(usrp_e_i2c) + max_i2c_data_bytes]; + + //load the data struct + usrp_e_i2c *data = reinterpret_cast<usrp_e_i2c*>(mem); + data->addr = addr; + data->len = num_bytes; + + //call the spi ioctl + this->ioctl(USRP_E_I2C_READ, data); + + //unload the data + byte_vector_t bytes(data->len); + UHD_ASSERT_THROW(bytes.size() == num_bytes); + std::copy(data->data, data->data+bytes.size(), bytes.begin()); + return bytes; + } + + /******************************************************************* + * SPI + ******************************************************************/ + boost::uint32_t transact_spi( + int which_slave, + const spi_config_t &config, + boost::uint32_t bits, + size_t num_bits, + bool readback + ){ + //load data struct + usrp_e_spi data; + data.readback = (readback)? UE_SPI_TXRX : UE_SPI_TXONLY; + data.slave = which_slave; + data.length = num_bits; + data.data = bits; + + //load the flags + data.flags = 0; + data.flags |= (config.miso_edge == spi_config_t::EDGE_RISE)? UE_SPI_LATCH_RISE : UE_SPI_LATCH_FALL; + data.flags |= (config.mosi_edge == spi_config_t::EDGE_RISE)? UE_SPI_PUSH_FALL : UE_SPI_PUSH_RISE; + + //call the spi ioctl + this->ioctl(USRP_E_SPI, &data); + + //unload the data + return data.data; + } + +private: + int _node_fd; + boost::mutex _ctrl_mutex; +}; + +/*********************************************************************** + * Public Make Function + **********************************************************************/ +usrp_e_iface::sptr usrp_e_iface::make(const std::string &node){ + return sptr(new usrp_e_iface_impl(node)); +} diff --git a/host/lib/usrp/usrp_e/usrp_e_iface.hpp b/host/lib/usrp/usrp_e/usrp_e_iface.hpp new file mode 100644 index 000000000..59aac43d9 --- /dev/null +++ b/host/lib/usrp/usrp_e/usrp_e_iface.hpp @@ -0,0 +1,112 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP_E_IFACE_HPP +#define INCLUDED_USRP_E_IFACE_HPP + +#include <uhd/transport/udp_simple.hpp> +#include <uhd/types/serial.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include <boost/cstdint.hpp> + +//////////////////////////////////////////////////////////////////////// +// I2C addresses +//////////////////////////////////////////////////////////////////////// +#define I2C_DEV_EEPROM 0x50 // 24LC02[45]: 7-bits 1010xxx +#define I2C_ADDR_MBOARD (I2C_DEV_EEPROM | 0x0) +#define I2C_ADDR_TX_DB (I2C_DEV_EEPROM | 0x4) +#define I2C_ADDR_RX_DB (I2C_DEV_EEPROM | 0x5) +//////////////////////////////////////////////////////////////////////// + +/*! + * The usrp-e interface class: + * Provides a set of functions to implementation layer. + * Including spi, peek, poke, control... + */ +class usrp_e_iface : boost::noncopyable, public uhd::i2c_iface{ +public: + typedef boost::shared_ptr<usrp_e_iface> sptr; + + /*! + * Make a new usrp-e interface with the control transport. + * \param node the device node name + * \return a new usrp-e interface object + */ + static sptr make(const std::string &node); + + /*! + * Get the underlying file descriptor. + * \return the file descriptor + */ + virtual int get_file_descriptor(void) = 0; + + /*! + * Perform an ioctl call on the device node file descriptor. + * This will throw when the internal ioctl call fails. + * \param request the control word + * \param mem pointer to some memory + */ + virtual void ioctl(int request, void *mem) = 0; + + /*! + * Write a register (32 bits) + * \param addr the address + * \param data the 32bit data + */ + virtual void poke32(boost::uint32_t addr, boost::uint32_t data) = 0; + + /*! + * Read a register (32 bits) + * \param addr the address + * \return the 32bit data + */ + virtual boost::uint32_t peek32(boost::uint32_t addr) = 0; + + /*! + * Write a register (16 bits) + * \param addr the address + * \param data the 16bit data + */ + virtual void poke16(boost::uint32_t addr, boost::uint16_t data) = 0; + + /*! + * Read a register (16 bits) + * \param addr the address + * \return the 16bit data + */ + virtual boost::uint16_t peek16(boost::uint32_t addr) = 0; + + /*! + * Perform an spi transaction. + * \param which_slave the slave device number + * \param config spi config args + * \param data the bits to write + * \param num_bits how many bits in data + * \param readback true to readback a value + * \return spi data if readback set + */ + virtual boost::uint32_t transact_spi( + int which_slave, + const uhd::spi_config_t &config, + boost::uint32_t data, + size_t num_bits, + bool readback + ) = 0; +}; + +#endif /* INCLUDED_USRP_E_IFACE_HPP */ diff --git a/host/lib/usrp/usrp_e/usrp_e_impl.cpp b/host/lib/usrp/usrp_e/usrp_e_impl.cpp new file mode 100644 index 000000000..5c0e1dbb0 --- /dev/null +++ b/host/lib/usrp/usrp_e/usrp_e_impl.cpp @@ -0,0 +1,142 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e_impl.hpp" +#include <uhd/usrp/device_props.hpp> +#include <uhd/usrp/mboard_props.hpp> +#include <uhd/utils/assert.hpp> +#include <uhd/utils/static.hpp> +#include <boost/format.hpp> +#include <boost/filesystem.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; +namespace fs = boost::filesystem; + +/*********************************************************************** + * Helper Functions + **********************************************************************/ +static std::string abs_path(const std::string &file_path){ + return fs::system_complete(fs::path(file_path)).file_string(); +} + +/*********************************************************************** + * Discovery + **********************************************************************/ +static device_addrs_t usrp_e_find(const device_addr_t &hint){ + device_addrs_t usrp_e_addrs; + + //return an empty list of addresses when type is set to non-usrp-e + if (hint.has_key("type") and hint["type"] != "usrp-e") return usrp_e_addrs; + + //device node not provided, assume its 0 + if (not hint.has_key("node")){ + device_addr_t new_addr = hint; + new_addr["node"] = "/dev/usrp_e0"; + return usrp_e_find(new_addr); + } + + //use the given device node name + if (fs::exists(hint["node"])){ + device_addr_t new_addr; + new_addr["type"] = "usrp-e"; + new_addr["node"] = abs_path(hint["node"]); + usrp_e_addrs.push_back(new_addr); + } + + return usrp_e_addrs; +} + +/*********************************************************************** + * Make + **********************************************************************/ +static device::sptr usrp_e_make(const device_addr_t &device_addr){ + return device::sptr(new usrp_e_impl(device_addr["node"])); +} + +UHD_STATIC_BLOCK(register_usrp_e_device){ + device::register_device(&usrp_e_find, &usrp_e_make); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +usrp_e_impl::usrp_e_impl(const std::string &node){ + std::cout << boost::format("Opening USRP-E on %s") % node << std::endl; + + //setup various interfaces into hardware + _iface = usrp_e_iface::make(node); + _clock_ctrl = usrp_e_clock_ctrl::make(_iface); + _codec_ctrl = usrp_e_codec_ctrl::make(_iface); + + //initialize the mboard + mboard_init(); + + //initialize the dboards + dboard_init(); + + //initialize the dsps + rx_ddc_init(); + tx_duc_init(); + + //init the codec properties + codec_init(); + + //init the io send/recv + io_init(); + + //set default subdev specs + this->mboard_set(MBOARD_PROP_RX_SUBDEV_SPEC, subdev_spec_t()); + this->mboard_set(MBOARD_PROP_TX_SUBDEV_SPEC, subdev_spec_t()); +} + +usrp_e_impl::~usrp_e_impl(void){ + /* NOP */ +} + +/*********************************************************************** + * Device Get + **********************************************************************/ +void usrp_e_impl::get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<device_prop_t>()){ + case DEVICE_PROP_NAME: + val = std::string("usrp-e device"); + return; + + case DEVICE_PROP_MBOARD: + UHD_ASSERT_THROW(key.name == ""); + val = _mboard_proxy->get_link(); + return; + + case DEVICE_PROP_MBOARD_NAMES: + val = prop_names_t(1, ""); //vector of size 1 with empty string + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * Device Set + **********************************************************************/ +void usrp_e_impl::set(const wax::obj &, const wax::obj &){ + UHD_THROW_PROP_SET_ERROR(); +} diff --git a/host/lib/usrp/usrp_e/usrp_e_impl.hpp b/host/lib/usrp/usrp_e/usrp_e_impl.hpp new file mode 100644 index 000000000..2457e27cc --- /dev/null +++ b/host/lib/usrp/usrp_e/usrp_e_impl.hpp @@ -0,0 +1,165 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp_e_iface.hpp" +#include "clock_ctrl.hpp" +#include "codec_ctrl.hpp" +#include <uhd/device.hpp> +#include <uhd/utils/pimpl.hpp> +#include <uhd/usrp/subdev_spec.hpp> +#include <uhd/usrp/dboard_eeprom.hpp> +#include <uhd/types/clock_config.hpp> +#include <uhd/types/stream_cmd.hpp> +#include <uhd/usrp/dboard_manager.hpp> + +#ifndef INCLUDED_USRP_E_IMPL_HPP +#define INCLUDED_USRP_E_IMPL_HPP + +static const double MASTER_CLOCK_RATE = 64e6; //TODO get from clock control + +//! load an fpga image from a bin file into the usrp-e fpga +extern void usrp_e_load_fpga(const std::string &bin_file); + +/*! + * Make a usrp-e dboard interface. + * \param iface the usrp-e interface object + * \param clock the clock control interface + * \param codec the codec control interface + * \return a sptr to a new dboard interface + */ +uhd::usrp::dboard_iface::sptr make_usrp_e_dboard_iface( + usrp_e_iface::sptr iface, + usrp_e_clock_ctrl::sptr clock, + usrp_e_codec_ctrl::sptr codec +); + +/*! + * Simple wax obj proxy class: + * Provides a wax obj interface for a set and a get function. + * This allows us to create nested properties structures + * while maintaining flattened code within the implementation. + */ +class wax_obj_proxy : public wax::obj{ +public: + typedef boost::function<void(const wax::obj &, wax::obj &)> get_t; + typedef boost::function<void(const wax::obj &, const wax::obj &)> set_t; + typedef boost::shared_ptr<wax_obj_proxy> sptr; + + static sptr make(const get_t &get, const set_t &set){ + return sptr(new wax_obj_proxy(get, set)); + } + +private: + get_t _get; set_t _set; + wax_obj_proxy(const get_t &get, const set_t &set): _get(get), _set(set){}; + void get(const wax::obj &key, wax::obj &val){return _get(key, val);} + void set(const wax::obj &key, const wax::obj &val){return _set(key, val);} +}; + +/*! + * USRP1E implementation guts: + * The implementation details are encapsulated here. + * Handles properties on the mboard, dboard, dsps... + */ +class usrp_e_impl : public uhd::device{ +public: + //structors + usrp_e_impl(const std::string &node); + ~usrp_e_impl(void); + + //the io interface + size_t send(const std::vector<const void *> &, size_t, const uhd::tx_metadata_t &, const uhd::io_type_t &, send_mode_t); + size_t recv(const std::vector<void *> &, size_t, uhd::rx_metadata_t &, const uhd::io_type_t &, recv_mode_t, size_t); + bool recv_async_msg(uhd::async_metadata_t &, size_t); + size_t get_max_send_samps_per_packet(void) const{return 503;} + size_t get_max_recv_samps_per_packet(void) const{return 503;} + +private: + //interface to ioctls and file descriptor + usrp_e_iface::sptr _iface; + + //FIXME fetch from ioctl? + static const size_t _max_num_samples = 2048/sizeof(boost::uint32_t); + + //handle io stuff + UHD_PIMPL_DECL(io_impl) _io_impl; + void io_init(void); + void issue_stream_cmd(const uhd::stream_cmd_t &stream_cmd); + void handle_overrun(size_t); + + //configuration shadows + uhd::clock_config_t _clock_config; + //TODO otw type recv/send + + //ad9522 clock control + usrp_e_clock_ctrl::sptr _clock_ctrl; + + //ad9862 codec control + usrp_e_codec_ctrl::sptr _codec_ctrl; + + //device functions and settings + void get(const wax::obj &, wax::obj &); + void set(const wax::obj &, const wax::obj &); + + //mboard functions and settings + void mboard_init(void); + void mboard_get(const wax::obj &, wax::obj &); + void mboard_set(const wax::obj &, const wax::obj &); + wax_obj_proxy::sptr _mboard_proxy; + uhd::usrp::subdev_spec_t _rx_subdev_spec, _tx_subdev_spec; + + //xx dboard functions and settings + void dboard_init(void); + uhd::usrp::dboard_manager::sptr _dboard_manager; + uhd::usrp::dboard_iface::sptr _dboard_iface; + + //rx dboard functions and settings + uhd::usrp::dboard_eeprom_t _rx_db_eeprom; + void rx_dboard_get(const wax::obj &, wax::obj &); + void rx_dboard_set(const wax::obj &, const wax::obj &); + wax_obj_proxy::sptr _rx_dboard_proxy; + + //tx dboard functions and settings + uhd::usrp::dboard_eeprom_t _tx_db_eeprom; + void tx_dboard_get(const wax::obj &, wax::obj &); + void tx_dboard_set(const wax::obj &, const wax::obj &); + wax_obj_proxy::sptr _tx_dboard_proxy; + + //rx ddc functions and settings + void rx_ddc_init(void); + void rx_ddc_get(const wax::obj &, wax::obj &); + void rx_ddc_set(const wax::obj &, const wax::obj &); + double _ddc_freq; size_t _ddc_decim; + wax_obj_proxy::sptr _rx_ddc_proxy; + + //tx duc functions and settings + void tx_duc_init(void); + void tx_duc_get(const wax::obj &, wax::obj &); + void tx_duc_set(const wax::obj &, const wax::obj &); + double _duc_freq; size_t _duc_interp; + wax_obj_proxy::sptr _tx_duc_proxy; + + //codec functions and settings + void codec_init(void); + void rx_codec_get(const wax::obj &, wax::obj &); + void rx_codec_set(const wax::obj &, const wax::obj &); + void tx_codec_get(const wax::obj &, wax::obj &); + void tx_codec_set(const wax::obj &, const wax::obj &); + wax_obj_proxy::sptr _rx_codec_proxy, _tx_codec_proxy; +}; + +#endif /* INCLUDED_USRP_E_IMPL_HPP */ diff --git a/host/lib/usrp/usrp_e/usrp_e_regs.hpp b/host/lib/usrp/usrp_e/usrp_e_regs.hpp new file mode 100644 index 000000000..a4f42093e --- /dev/null +++ b/host/lib/usrp/usrp_e/usrp_e_regs.hpp @@ -0,0 +1,196 @@ + + +//////////////////////////////////////////////////////////////// +// +// Memory map for embedded wishbone bus +// +//////////////////////////////////////////////////////////////// + +// All addresses are byte addresses. All accesses are word (16-bit) accesses. +// This means that address bit 0 is usually 0. +// There are 11 bits of address for the control. + +#ifndef __USRP_E_REGS_H +#define __USRP_E_REGS_H + +///////////////////////////////////////////////////// +// Slave pointers + +#define UE_REG_SLAVE(n) ((n)<<7) +#define UE_REG_SR_ADDR(n) ((UE_REG_SLAVE(5)) + (4*(n))) + +///////////////////////////////////////////////////// +// Slave 0 -- Misc Regs + +#define UE_REG_MISC_BASE UE_REG_SLAVE(0) + +#define UE_REG_MISC_LED UE_REG_MISC_BASE + 0 +#define UE_REG_MISC_SW UE_REG_MISC_BASE + 2 +#define UE_REG_MISC_CGEN_CTRL UE_REG_MISC_BASE + 4 +#define UE_REG_MISC_CGEN_ST UE_REG_MISC_BASE + 6 +#define UE_REG_MISC_TEST UE_REG_MISC_BASE + 8 +#define UE_REG_MISC_RX_LEN UE_REG_MISC_BASE + 10 +#define UE_REG_MISC_TX_LEN UE_REG_MISC_BASE + 12 + +///////////////////////////////////////////////////// +// Slave 1 -- UART +// CLKDIV is 16 bits, others are only 8 + +#define UE_REG_UART_BASE UE_REG_SLAVE(1) + +#define UE_REG_UART_CLKDIV UE_REG_UART_BASE + 0 +#define UE_REG_UART_TXLEVEL UE_REG_UART_BASE + 2 +#define UE_REG_UART_RXLEVEL UE_REG_UART_BASE + 4 +#define UE_REG_UART_TXCHAR UE_REG_UART_BASE + 6 +#define UE_REG_UART_RXCHAR UE_REG_UART_BASE + 8 + +///////////////////////////////////////////////////// +// Slave 2 -- SPI Core +// This should be accessed through the IOCTL +// Users should not touch directly + +#define UE_REG_SPI_BASE UE_REG_SLAVE(2) + +//spi slave constants +#define UE_SPI_SS_AD9522 (1 << 3) +#define UE_SPI_SS_AD9862 (1 << 2) +#define UE_SPI_SS_TX_DB (1 << 1) +#define UE_SPI_SS_RX_DB (1 << 0) + +//////////////////////////////////////////////// +// Slave 3 -- I2C Core +// This should be accessed through the IOCTL +// Users should not touch directly + +#define UE_REG_I2C_BASE UE_REG_SLAVE(3) + + +//////////////////////////////////////////////// +// Slave 4 -- GPIO + +#define UE_REG_GPIO_BASE UE_REG_SLAVE(4) + +#define UE_REG_GPIO_RX_IO UE_REG_GPIO_BASE + 0 +#define UE_REG_GPIO_TX_IO UE_REG_GPIO_BASE + 2 +#define UE_REG_GPIO_RX_DDR UE_REG_GPIO_BASE + 4 +#define UE_REG_GPIO_TX_DDR UE_REG_GPIO_BASE + 6 +#define UE_REG_GPIO_RX_SEL UE_REG_GPIO_BASE + 8 +#define UE_REG_GPIO_TX_SEL UE_REG_GPIO_BASE + 10 +#define UE_REG_GPIO_RX_DBG UE_REG_GPIO_BASE + 12 +#define UE_REG_GPIO_TX_DBG UE_REG_GPIO_BASE + 14 + +//possible bit values for sel when dbg is 0: +#define GPIO_SEL_SW 0 // if pin is an output, set by software in the io reg +#define GPIO_SEL_ATR 1 // if pin is an output, set by ATR logic + +//possible bit values for sel when dbg is 1: +#define GPIO_SEL_DEBUG_0 0 // if pin is an output, debug lines from FPGA fabric +#define GPIO_SEL_DEBUG_1 1 // if pin is an output, debug lines from FPGA fabric + + +//////////////////////////////////////////////////// +// Slave 5 -- Settings Bus +// +// Output-only, no readback, 32 registers total +// Each register must be written 32 bits at a time +// First the address xxx_xx00 and then xxx_xx10 + +#define UE_REG_SETTINGS_BASE UE_REG_SLAVE(5) + +/////////////////////////////////////////////////// +// Slave 6 -- ATR Controller +// 16 regs + +#define UE_REG_ATR_BASE UE_REG_SLAVE(6) + +#define UE_REG_ATR_IDLE_RXSIDE UE_REG_ATR_BASE + 0 +#define UE_REG_ATR_IDLE_TXSIDE UE_REG_ATR_BASE + 2 +#define UE_REG_ATR_INTX_RXSIDE UE_REG_ATR_BASE + 4 +#define UE_REG_ATR_INTX_TXSIDE UE_REG_ATR_BASE + 6 +#define UE_REG_ATR_INRX_RXSIDE UE_REG_ATR_BASE + 8 +#define UE_REG_ATR_INRX_TXSIDE UE_REG_ATR_BASE + 10 +#define UE_REG_ATR_FULL_RXSIDE UE_REG_ATR_BASE + 12 +#define UE_REG_ATR_FULL_TXSIDE UE_REG_ATR_BASE + 14 + +///////////////////////////////////////////////// +// DSP RX Regs +//////////////////////////////////////////////// +#define UE_REG_DSP_RX_FREQ UE_REG_SR_ADDR(0) +#define UE_REG_DSP_RX_SCALE_IQ UE_REG_SR_ADDR(1) // {scale_i,scale_q} +#define UE_REG_DSP_RX_DECIM_RATE UE_REG_SR_ADDR(2) // hb and decim rate +#define UE_REG_DSP_RX_DCOFFSET_I UE_REG_SR_ADDR(3) // Bit 31 high sets fixed offset mode, using lower 14 bits, // otherwise it is automatic +#define UE_REG_DSP_RX_DCOFFSET_Q UE_REG_SR_ADDR(4) // Bit 31 high sets fixed offset mode, using lower 14 bits +#define UE_REG_DSP_RX_MUX UE_REG_SR_ADDR(5) + +/////////////////////////////////////////////////// +// VITA RX CTRL regs +/////////////////////////////////////////////////// +// The following 3 are logically a single command register. +// They are clocked into the underlying fifo when time_ticks is written. +#define UE_REG_CTRL_RX_STREAM_CMD UE_REG_SR_ADDR(8) // {now, chain, num_samples(30) +#define UE_REG_CTRL_RX_TIME_SECS UE_REG_SR_ADDR(9) +#define UE_REG_CTRL_RX_TIME_TICKS UE_REG_SR_ADDR(10) +#define UE_REG_CTRL_RX_CLEAR_OVERRUN UE_REG_SR_ADDR(11) // write anything to clear overrun +#define UE_REG_CTRL_RX_VRT_HEADER UE_REG_SR_ADDR(12) // word 0 of packet. FPGA fills in packet counter +#define UE_REG_CTRL_RX_VRT_STREAM_ID UE_REG_SR_ADDR(13) // word 1 of packet. +#define UE_REG_CTRL_RX_VRT_TRAILER UE_REG_SR_ADDR(14) +#define UE_REG_CTRL_RX_NSAMPS_PER_PKT UE_REG_SR_ADDR(15) +#define UE_REG_CTRL_RX_NCHANNELS UE_REG_SR_ADDR(16) // 1 in basic case, up to 4 for vector sources + +///////////////////////////////////////////////// +// DSP TX Regs +//////////////////////////////////////////////// +#define UE_REG_DSP_TX_FREQ UE_REG_SR_ADDR(17) +#define UE_REG_DSP_TX_SCALE_IQ UE_REG_SR_ADDR(18) // {scale_i,scale_q} +#define UE_REG_DSP_TX_INTERP_RATE UE_REG_SR_ADDR(19) +#define UE_REG_DSP_TX_UNUSED UE_REG_SR_ADDR(20) +#define UE_REG_DSP_TX_MUX UE_REG_SR_ADDR(21) + +///////////////////////////////////////////////// +// VITA TX CTRL regs +//////////////////////////////////////////////// +#define UE_REG_CTRL_TX_NCHANNELS UE_REG_SR_ADDR(24) +#define UE_REG_CTRL_TX_CLEAR_UNDERRUN UE_REG_SR_ADDR(25) +#define UE_REG_CTRL_TX_REPORT_SID UE_REG_SR_ADDR(26) +#define UE_REG_CTRL_TX_POLICY UE_REG_SR_ADDR(27) + +#define UE_FLAG_CTRL_TX_POLICY_WAIT (0x1 << 0) +#define UE_FLAG_CTRL_TX_POLICY_NEXT_PACKET (0x1 << 1) +#define UE_FLAG_CTRL_TX_POLICY_NEXT_BURST (0x1 << 2) + +///////////////////////////////////////////////// +// VITA49 64 bit time (write only) +//////////////////////////////////////////////// + /*! + * \brief Time 64 flags + * + * <pre> + * + * 3 2 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-----------------------------------------------------------+-+-+ + * | |S|P| + * +-----------------------------------------------------------+-+-+ + * + * P - PPS edge selection (0=negedge, 1=posedge, default=0) + * S - Source (0=sma, 1=mimo, 0=default) + * + * </pre> + */ +#define UE_REG_TIME64_SECS UE_REG_SR_ADDR(28) // value to set absolute secs to on next PPS +#define UE_REG_TIME64_TICKS UE_REG_SR_ADDR(29) // value to set absolute ticks to on next PPS +#define UE_REG_TIME64_FLAGS UE_REG_SR_ADDR(30) // flags - see chart above +#define UE_REG_TIME64_IMM UE_REG_SR_ADDR(31) // set immediate (0=latch on next pps, 1=latch immediate, default=0) +#define UE_REG_TIME64_TPS UE_REG_SR_ADDR(31) // clock ticks per second (counter rollover) + +//pps flags (see above) +#define UE_FLAG_TIME64_PPS_NEGEDGE (0 << 0) +#define UE_FLAG_TIME64_PPS_POSEDGE (1 << 0) +#define UE_FLAG_TIME64_PPS_SMA (0 << 1) +#define UE_FLAG_TIME64_PPS_MIMO (1 << 1) + +#define UE_FLAG_TIME64_LATCH_NOW 1 +#define UE_FLAG_TIME64_LATCH_NEXT_PPS 0 + +#endif + diff --git a/host/utils/CMakeLists.txt b/host/utils/CMakeLists.txt index a95864ca7..280c8dfaa 100644 --- a/host/utils/CMakeLists.txt +++ b/host/utils/CMakeLists.txt @@ -24,9 +24,33 @@ TARGET_LINK_LIBRARIES(uhd_find_devices uhd) ADD_EXECUTABLE(uhd_usrp_probe uhd_usrp_probe.cpp) TARGET_LINK_LIBRARIES(uhd_usrp_probe uhd) +ADD_EXECUTABLE(fpga-downloader fpga-downloader.cpp) +TARGET_LINK_LIBRARIES(fpga-downloader) + +ADD_EXECUTABLE(clkgen-config clkgen-config.cpp) +TARGET_LINK_LIBRARIES(clkgen-config) + +ADD_EXECUTABLE(usrp-e-loopback usrp-e-loopback.c) +TARGET_LINK_LIBRARIES(usrp-e-loopback pthread) + +ADD_EXECUTABLE(usrp-e-debug-pins usrp-e-debug-pins.c) +TARGET_LINK_LIBRARIES(usrp-e-debug-pins) + +ADD_EXECUTABLE(usrp-e-i2c usrp-e-i2c.c) +TARGET_LINK_LIBRARIES(usrp-e-i2c) + +ADD_EXECUTABLE(usrp-e-spi usrp-e-spi.c) +TARGET_LINK_LIBRARIES(usrp-e-spi) + INSTALL(TARGETS uhd_find_devices uhd_usrp_probe + fpga-downloader + usrp-e-loopback + usrp-e-debug-pins + usrp-e-spi + usrp-e-i2c + clkgen-config RUNTIME DESTINATION ${RUNTIME_DIR} ) diff --git a/host/utils/clkgen-config.cpp b/host/utils/clkgen-config.cpp new file mode 100644 index 000000000..e8279b4ae --- /dev/null +++ b/host/utils/clkgen-config.cpp @@ -0,0 +1,296 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003,2004,2008,2009 Free Software Foundation, Inc. + * + * This file is part of UHD + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. +*/ + +#include <iostream> +#include <sstream> +#include <fstream> +#include <string> +#include <cstdlib> + +#include <fcntl.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/ioctl.h> + +#include <linux/spi/spidev.h> + + +// Programming data for clock gen chip +static const unsigned int config_data[] = { + 0x000024, + 0x023201, + 0x000081, + 0x000400, + 0x00104c, + 0x001101, + 0x001200, + 0x001300, + 0x001414, + 0x001500, + 0x001604, + 0x001704, + 0x001807, + 0x001900, + //0x001a00,//for debug + 0x001a32, + 0x001b12, + 0x001c44, + 0x001d00, + 0x001e00, + 0x00f062, + 0x00f162, + 0x00f262, + 0x00f362, + 0x00f462, + 0x00f562, + 0x00f662, + 0x00f762, + 0x00f862, + 0x00f962, + 0x00fa62, + 0x00fb62, + 0x00fc00, + 0x00fd00, + 0x019021, + 0x019100, + 0x019200, + 0x019333, + 0x019400, + 0x019500, + 0x019611, + 0x019700, + 0x019800, + 0x019900, + 0x019a00, + 0x019b00, + 0x01e003, + 0x01e102, + 0x023000, + 0x023201, + 0x0b0201, + 0x0b0300, + 0x001fff, + 0x0a0000, + 0x0a0100, + 0x0a0200, + 0x0a0302, + 0x0a0400, + 0x0a0504, + 0x0a060e, + 0x0a0700, + 0x0a0810, + 0x0a090e, + 0x0a0a00, + 0x0a0bf0, + 0x0a0c0b, + 0x0a0d01, + 0x0a0e90, + 0x0a0f01, + 0x0a1001, + 0x0a11e0, + 0x0a1201, + 0x0a1302, + 0x0a1430, + 0x0a1580, + 0x0a16ff, + 0x023201, + 0x0b0301, + 0x023201, +}; + + +const unsigned int CLKGEN_SELECT = 145; + + +enum gpio_direction {IN, OUT}; + +class gpio { + public: + + gpio(unsigned int gpio_num, gpio_direction pin_direction, bool close_action); + ~gpio(); + + bool get_value(); + void set_value(bool state); + + private: + + unsigned int gpio_num; + + std::stringstream base_path; + std::fstream value_file; + std::fstream direction_file; + bool close_action; // True set to input and release, false do nothing +}; + +class spidev { + public: + + spidev(std::string dev_name); + ~spidev(); + + void send(char *wbuf, char *rbuf, unsigned int nbytes); + + private: + + int fd; + +}; + +gpio::gpio(unsigned int _gpio_num, gpio_direction pin_direction, bool close_action) +{ + std::fstream export_file; + + gpio_num = _gpio_num; + + export_file.open("/sys/class/gpio/export", std::ios::out); + if (!export_file.is_open()) ///\todo Poor error handling + std::cout << "Failed to open gpio export file." << std::endl; + + export_file << gpio_num << std::endl; + + base_path << "/sys/class/gpio/gpio" << gpio_num << std::flush; + + std::string direction_file_name; + + direction_file_name = base_path.str() + "/direction"; + + direction_file.open(direction_file_name.c_str()); + if (!direction_file.is_open()) + std::cout << "Failed to open direction file." << std::endl; + if (pin_direction == OUT) + direction_file << "out" << std::endl; + else + direction_file << "in" << std::endl; + + std::string value_file_name; + + value_file_name = base_path.str() + "/value"; + + value_file.open(value_file_name.c_str(), std::ios_base::in | std::ios_base::out); + if (!value_file.is_open()) + std::cout << "Failed to open value file." << std::endl; +} + +bool gpio::get_value() +{ + + std::string val; + + std::getline(value_file, val); + value_file.seekg(0); + + if (val == "0") + return false; + else if (val == "1") + return true; + else + std::cout << "Data read from value file|" << val << "|" << std::endl; + + return false; +} + +void gpio::set_value(bool state) +{ + + if (state) + value_file << "1" << std::endl; + else + value_file << "0" << std::endl; +} + +gpio::~gpio() +{ + if (close_action) { + std::fstream unexport_file; + + direction_file << "in" << std::endl; + + unexport_file.open("/sys/class/gpio/unexport", std::ios::out); + if (!unexport_file.is_open()) ///\todo Poor error handling + std::cout << "Failed to open gpio export file." << std::endl; + + unexport_file << gpio_num << std::endl; + + } + +} + +spidev::spidev(std::string fname) +{ + int ret; + int mode = 0; + int speed = 12000; + int bits = 24; + + fd = open(fname.c_str(), O_RDWR); + + ret = ioctl(fd, SPI_IOC_WR_MODE, &mode); + ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed); + ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits); +} + + +spidev::~spidev() +{ + close(fd); +} + +void spidev::send(char *buf, char *rbuf, unsigned int nbytes) +{ + int ret; + + struct spi_ioc_transfer tr; + tr.tx_buf = (unsigned long) buf; + tr.rx_buf = (unsigned long) rbuf; + tr.len = nbytes; + tr.delay_usecs = 0; + tr.speed_hz = 12000000; + tr.bits_per_word = 24; + + ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); + +} + +static void send_config_to_clkgen(gpio &chip_select, const unsigned int data[], unsigned int data_size) +{ + spidev spi("/dev/spidev1.0"); + unsigned int rbuf; + + for (unsigned int i = 0; i < data_size; i++) { + + std::cout << "sending " << std::hex << data[i] << std::endl; + chip_select.set_value(0); + spi.send((char *)&data[i], (char *)&rbuf, 4); + chip_select.set_value(1); + + }; +} + +int main(int argc, char *argv[]) +{ + + gpio clkgen_select(CLKGEN_SELECT, OUT, true); + + send_config_to_clkgen(clkgen_select, config_data, sizeof(config_data)/sizeof(unsigned int)); +} + diff --git a/host/utils/fpga-downloader.cpp b/host/utils/fpga-downloader.cpp new file mode 100644 index 000000000..80ee71600 --- /dev/null +++ b/host/utils/fpga-downloader.cpp @@ -0,0 +1,267 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003,2004,2008,2009 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. +*/ + +#include <iostream> +#include <sstream> +#include <fstream> +#include <string> +#include <cstdlib> + +#include <fcntl.h> +#include <errno.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/ioctl.h> + +#include <linux/spi/spidev.h> + +/* + * Configuration connections + * + * CCK - MCSPI1_CLK + * DIN - MCSPI1_MOSI + * PROG_B - GPIO_175 - output (change mux) + * DONE - GPIO_173 - input (change mux) + * INIT_B - GPIO_114 - input (change mux) + * +*/ + +const unsigned int PROG_B = 175; +const unsigned int DONE = 173; +const unsigned int INIT_B = 114; + +static std::string bit_file = "safe_u1e.bin"; + +const int BUF_SIZE = 4096; + +enum gpio_direction {IN, OUT}; + +class gpio { + public: + + gpio(unsigned int gpio_num, gpio_direction pin_direction); + + bool get_value(); + void set_value(bool state); + + private: + + std::stringstream base_path; + std::fstream value_file; +}; + +class spidev { + public: + + spidev(std::string dev_name); + ~spidev(); + + void send(char *wbuf, char *rbuf, unsigned int nbytes); + + private: + + int fd; + +}; + +gpio::gpio(unsigned int gpio_num, gpio_direction pin_direction) +{ + std::fstream export_file; + + export_file.open("/sys/class/gpio/export", std::ios::out); + if (!export_file.is_open()) ///\todo Poor error handling + std::cout << "Failed to open gpio export file." << std::endl; + + export_file << gpio_num << std::endl; + + base_path << "/sys/class/gpio/gpio" << gpio_num << std::flush; + + std::fstream direction_file; + std::string direction_file_name; + + direction_file_name = base_path.str() + "/direction"; + + direction_file.open(direction_file_name.c_str()); + if (!direction_file.is_open()) + std::cout << "Failed to open direction file." << std::endl; + if (pin_direction == OUT) + direction_file << "out" << std::endl; + else + direction_file << "in" << std::endl; + + std::string value_file_name; + + value_file_name = base_path.str() + "/value"; + + value_file.open(value_file_name.c_str(), std::ios_base::in | std::ios_base::out); + if (!value_file.is_open()) + std::cout << "Failed to open value file." << std::endl; +} + +bool gpio::get_value() +{ + + std::string val; + + std::getline(value_file, val); + value_file.seekg(0); + + if (val == "0") + return false; + else if (val == "1") + return true; + else + std::cout << "Data read from value file|" << val << "|" << std::endl; + + return false; +} + +void gpio::set_value(bool state) +{ + + if (state) + value_file << "1" << std::endl; + else + value_file << "0" << std::endl; +} + +static void prepare_fpga_for_configuration(gpio &prog, gpio &init) +{ + + prog.set_value(true); + prog.set_value(false); + prog.set_value(true); + +#if 0 + bool ready_to_program(false); + unsigned int count(0); + do { + ready_to_program = init.get_value(); + count++; + + sleep(1); + } while (count < 10 && !ready_to_program); + + if (count == 10) { + std::cout << "FPGA not ready for programming." << std::endl; + exit(-1); + } +#endif +} + +spidev::spidev(std::string fname) +{ + int ret; + int mode = 0; + int speed = 12000000; + int bits = 8; + + fd = open(fname.c_str(), O_RDWR); + + ret = ioctl(fd, SPI_IOC_WR_MODE, &mode); + ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed); + ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits); +} + + +spidev::~spidev() +{ + close(fd); +} + +void spidev::send(char *buf, char *rbuf, unsigned int nbytes) +{ + int ret; + + struct spi_ioc_transfer tr; + tr.tx_buf = (unsigned long) buf; + tr.rx_buf = (unsigned long) rbuf; + tr.len = nbytes; + tr.delay_usecs = 0; + tr.speed_hz = 48000000; + tr.bits_per_word = 8; + + ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); + +} + +static void send_file_to_fpga(std::string &file_name, gpio &error, gpio &done) +{ + std::ifstream bitstream; + + std::cout << "File name - " << file_name.c_str() << std::endl; + + bitstream.open(file_name.c_str(), std::ios::binary); + if (!bitstream.is_open()) + std::cout << "File " << file_name << " not opened succesfully." << std::endl; + + spidev spi("/dev/spidev1.0"); + char buf[BUF_SIZE]; + char rbuf[BUF_SIZE]; + + do { + bitstream.read(buf, BUF_SIZE); + spi.send(buf, rbuf, bitstream.gcount()); + + if (error.get_value()) + std::cout << "INIT_B went high, error occured." << std::endl; + + if (!done.get_value()) + std::cout << "Configuration complete." << std::endl; + + } while (bitstream.gcount() == BUF_SIZE); +} + +int main(int argc, char *argv[]) +{ + + gpio gpio_prog_b(PROG_B, OUT); + gpio gpio_init_b(INIT_B, IN); + gpio gpio_done (DONE, IN); + + if (argc == 2) + bit_file = argv[1]; + + bool module_found(false); + std::ifstream mod_file("/proc/modules"); + while (!mod_file.eof()) { + std::string line; + getline(mod_file, line); + if (line.find("usrp_e") != std::string::npos) + module_found = true; + } + mod_file.close(); + + if (module_found) { + std::cout << "USRP Embedded kernel module loaded, not loading FPGA." << std::endl; + return -1; + } + + std::cout << "FPGA config file: " << bit_file << std::endl; + + prepare_fpga_for_configuration(gpio_prog_b, gpio_init_b); + + std::cout << "Done = " << gpio_done.get_value() << std::endl; + + send_file_to_fpga(bit_file, gpio_init_b, gpio_done); +} + diff --git a/host/utils/usrp-e-debug-pins.c b/host/utils/usrp-e-debug-pins.c new file mode 100644 index 000000000..1ed2c8983 --- /dev/null +++ b/host/utils/usrp-e-debug-pins.c @@ -0,0 +1,77 @@ +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/types.h> +#include <fcntl.h> +#include <string.h> +#include <sys/ioctl.h> + +#include <linux/usrp_e.h> +#include "usrp_e_regs.hpp" + +// Usage: usrp_e_gpio <string> + +static int fp; + +static int read_reg(__u16 reg) +{ + int ret; + struct usrp_e_ctl16 d; + + d.offset = reg; + d.count = 1; + ret = ioctl(fp, USRP_E_READ_CTL16, &d); + return d.buf[0]; +} + +static void write_reg(__u16 reg, __u16 val) +{ + int ret; + struct usrp_e_ctl16 d; + + d.offset = reg; + d.count = 1; + d.buf[0] = val; + ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); +} + +int main(int argc, char *argv[]) +{ + int test; + + test = 0; + if (argc < 2) { + printf("%s 0|1|off\n", argv[0]); + } + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + if (fp < 0) { + perror("Open failed"); + return -1; + } + + if (strcmp(argv[1], "0") == 0) { + printf("Selected 0 based on %s\n", argv[1]); + write_reg(UE_REG_GPIO_TX_DDR, 0xFFFF); + write_reg(UE_REG_GPIO_RX_DDR, 0xFFFF); + write_reg(UE_REG_GPIO_TX_SEL, 0x0); + write_reg(UE_REG_GPIO_RX_SEL, 0x0); + write_reg(UE_REG_GPIO_TX_DBG, 0xFFFF); + write_reg(UE_REG_GPIO_RX_DBG, 0xFFFF); + } else if (strcmp(argv[1], "1") == 0) { + printf("Selected 1 based on %s\n", argv[1]); + write_reg(UE_REG_GPIO_TX_DDR, 0xFFFF); + write_reg(UE_REG_GPIO_RX_DDR, 0xFFFF); + write_reg(UE_REG_GPIO_TX_SEL, 0xFFFF); + write_reg(UE_REG_GPIO_RX_SEL, 0xFFFF); + write_reg(UE_REG_GPIO_TX_DBG, 0xFFFF); + write_reg(UE_REG_GPIO_RX_DBG, 0xFFFF); + } else { + printf("Selected off based on %s\n", argv[1]); + write_reg(UE_REG_GPIO_TX_DDR, 0x0); + write_reg(UE_REG_GPIO_RX_DDR, 0x0); + } + + return 0; +} diff --git a/host/utils/usrp-e-i2c.c b/host/utils/usrp-e-i2c.c new file mode 100644 index 000000000..c6fd4c632 --- /dev/null +++ b/host/utils/usrp-e-i2c.c @@ -0,0 +1,87 @@ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <sys/types.h> +#include <fcntl.h> +#include <sys/ioctl.h> + +#include <linux/usrp_e.h> + +// Usage: usrp_e_i2c w address data0 data1 data 2 .... +// Usage: usrp_e_i2c r address count + +int main(int argc, char *argv[]) +{ + int fp, ret, i, tmp; + struct usrp_e_i2c *i2c_msg; + int direction, address, count; + + if (argc < 3) { + printf("Usage: usrp-e-i2c w address data0 data1 data2 ...\n"); + printf("Usage: usrp-e-i2c r address count\n"); + printf("All addresses and data in hex.\n"); + exit(-1); + } + + if (strcmp(argv[1], "r") == 0) { + direction = 0; + } else if (strcmp(argv[1], "w") == 0) { + direction = 1; + } else { + return -1; + } + + sscanf(argv[2], "%X", &address); + printf("Address = %X\n", address); + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + if (fp < 0) { + perror("Open failed"); + return -1; + } + +// sleep(1); + + if (direction) { + count = argc - 3; + } else { + sscanf(argv[3], "%X", &count); + } + printf("Count = %X\n", count); + + i2c_msg = malloc(sizeof(i2c_msg) + count * sizeof(char)); + + i2c_msg->addr = address; + i2c_msg->len = count; + + for (i = 0; i < count; i++) { + i2c_msg->data[i] = i; + } + + if (direction) { + // Write + + for (i=0; i<count; i++) { + sscanf(argv[3+i], "%X", &tmp); + i2c_msg->data[i] = tmp; + } + + ret = ioctl(fp, USRP_E_I2C_WRITE, i2c_msg); + printf("Return value from i2c_write ioctl: %d\n", ret); + } else { + // Read + + ret = ioctl(fp, USRP_E_I2C_READ, i2c_msg); + printf("Return value from i2c_read ioctl: %d\n", ret); + + printf("Ioctl: %d Data read :", ret); + for (i=0; i<count; i++) { + printf(" %X", i2c_msg->data[i]); + } + printf("\n"); + + } + return 0; +} diff --git a/host/utils/usrp-e-loopback.c b/host/utils/usrp-e-loopback.c new file mode 100644 index 000000000..f400fe0be --- /dev/null +++ b/host/utils/usrp-e-loopback.c @@ -0,0 +1,194 @@ +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> +#include <pthread.h> +#include <stdlib.h> +#include <unistd.h> +#include <stddef.h> +#include <sys/mman.h> +#include <linux/usrp_e.h> + +// max length #define PKT_DATA_LENGTH 1016 +static int packet_data_length; +static int error; + +struct pkt { + int len; + int checksum; + int seq_num; + short data[]; +}; + +static int fp; + +static int calc_checksum(struct pkt *p) +{ + int i, sum; + + i = 0; + sum = 0; + + for (i=0; i < p->len; i++) + sum += p->data[i]; + + sum += p->seq_num; + sum += p->len; + + return sum; +} + +static void *read_thread(void *threadid) +{ + char *rx_data; + int cnt, prev_seq_num, pkt_count, seq_num_failure; + struct pkt *p; + unsigned long bytes_transfered, elapsed_seconds; + struct timeval start_time, finish_time; + + printf("Greetings from the reading thread!\n"); + + bytes_transfered = 0; + gettimeofday(&start_time, NULL); + + // IMPORTANT: must assume max length packet from fpga + rx_data = malloc(2048); + p = (struct pkt *) ((void *)rx_data); + + prev_seq_num = 0; + pkt_count = 0; + seq_num_failure = 0; + + while (1) { + + cnt = read(fp, rx_data, 2048); + if (cnt < 0) + printf("Error returned from read: %d, sequence number = %d\n", cnt, p->seq_num); + +// printf("p->seq_num = %d\n", p->seq_num); + + + pkt_count++; + + if (p->seq_num != prev_seq_num + 1) { + printf("Sequence number fail, current = %d, previous = %d, pkt_count = %d\n", + p->seq_num, prev_seq_num, pkt_count); + + seq_num_failure ++; + if (seq_num_failure > 2) + error = 1; + } + + prev_seq_num = p->seq_num; + + if (calc_checksum(p) != p->checksum) { + printf("Checksum fail packet = %X, expected = %X, pkt_count = %d\n", + calc_checksum(p), p->checksum, pkt_count); + error = 1; + } + + bytes_transfered += cnt; + + if (bytes_transfered > (100 * 1000000)) { + gettimeofday(&finish_time, NULL); + elapsed_seconds = finish_time.tv_sec - start_time.tv_sec; + + printf("RX data transfer rate = %f K Samples/second\n", + (float) bytes_transfered / (float) elapsed_seconds / 4000); + + + start_time = finish_time; + bytes_transfered = 0; + } + + +// printf("."); +// fflush(stdout); +// printf("\n"); + } + +} + +static void *write_thread(void *threadid) +{ + int seq_number, i, cnt; + void *tx_data; + struct pkt *p; + + printf("Greetings from the write thread!\n"); + + tx_data = malloc(2048); + p = (struct pkt *) ((void *)tx_data); + + for (i=0; i < packet_data_length; i++) +// p->data[i] = random() >> 16; + p->data[i] = i; + + seq_number = 1; + + while (1) { + p->seq_num = seq_number++; + + if (packet_data_length > 0) + p->len = packet_data_length; + else + p->len = (random() & 0x1ff) + (1004 - 512); + + p->checksum = calc_checksum(p); + + cnt = write(fp, tx_data, p->len * 2 + 12); + if (cnt < 0) + printf("Error returned from write: %d\n", cnt); +// sleep(1); + } +} + + +int main(int argc, char *argv[]) +{ + pthread_t tx, rx; + long int t; + struct sched_param s = { + .sched_priority = 1 + }; + void *rb; + struct usrp_transfer_frame *tx_rb, *rx_rb; + + if (argc < 2) { + printf("%s data_size\n", argv[0]); + return -1; + } + + packet_data_length = atoi(argv[1]); + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + + rb = mmap(0, 202 * 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fp, 0); + if (!rb) { + printf("mmap failed\n"); + exit; + } + + + sched_setscheduler(0, SCHED_RR, &s); + error = 0; + +#if 1 + if (pthread_create(&rx, NULL, read_thread, (void *) t)) { + printf("Failed to create rx thread\n"); + exit(-1); + } + + sleep(1); +#endif + + if (pthread_create(&tx, NULL, write_thread, (void *) t)) { + printf("Failed to create tx thread\n"); + exit(-1); + } + +// while (!error) + sleep(1000000000); + + printf("Done sleeping\n"); +} diff --git a/host/utils/usrp-e-spi.c b/host/utils/usrp-e-spi.c new file mode 100644 index 000000000..5203f56a8 --- /dev/null +++ b/host/utils/usrp-e-spi.c @@ -0,0 +1,54 @@ +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/types.h> +#include <fcntl.h> +#include <sys/ioctl.h> + +#include <linux/usrp_e.h> + +// Usage: usrp_e_spi w|rb slave data + +int main(int argc, char *argv[]) +{ + int fp, slave, length, ret; + unsigned int data; + struct usrp_e_spi spi_dat; + + if (argc < 5) { + printf("Usage: usrp_e_spi w|rb slave transfer_length data\n"); + exit(-1); + } + + slave = atoi(argv[2]); + length = atoi(argv[3]); + data = atoll(argv[4]); + + printf("Data = %X\n", data); + + fp = open("/dev/usrp_e0", O_RDWR); + printf("fp = %d\n", fp); + if (fp < 0) { + perror("Open failed"); + return -1; + } + +// sleep(1); + + + spi_dat.slave = slave; + spi_dat.data = data; + spi_dat.length = length; + spi_dat.flags = UE_SPI_PUSH_FALL | UE_SPI_LATCH_RISE; + + if (*argv[1] == 'r') { + spi_dat.readback = 1; + ret = ioctl(fp, USRP_E_SPI, &spi_dat); + printf("Ioctl returns: %d, Data returned = %d\n", ret, spi_dat.data); + } else { + spi_dat.readback = 0; + ioctl(fp, USRP_E_SPI, &spi_dat); + } + + return 0; +} diff --git a/host/utils/usrp_e_regs.hpp b/host/utils/usrp_e_regs.hpp new file mode 100644 index 000000000..a4f42093e --- /dev/null +++ b/host/utils/usrp_e_regs.hpp @@ -0,0 +1,196 @@ + + +//////////////////////////////////////////////////////////////// +// +// Memory map for embedded wishbone bus +// +//////////////////////////////////////////////////////////////// + +// All addresses are byte addresses. All accesses are word (16-bit) accesses. +// This means that address bit 0 is usually 0. +// There are 11 bits of address for the control. + +#ifndef __USRP_E_REGS_H +#define __USRP_E_REGS_H + +///////////////////////////////////////////////////// +// Slave pointers + +#define UE_REG_SLAVE(n) ((n)<<7) +#define UE_REG_SR_ADDR(n) ((UE_REG_SLAVE(5)) + (4*(n))) + +///////////////////////////////////////////////////// +// Slave 0 -- Misc Regs + +#define UE_REG_MISC_BASE UE_REG_SLAVE(0) + +#define UE_REG_MISC_LED UE_REG_MISC_BASE + 0 +#define UE_REG_MISC_SW UE_REG_MISC_BASE + 2 +#define UE_REG_MISC_CGEN_CTRL UE_REG_MISC_BASE + 4 +#define UE_REG_MISC_CGEN_ST UE_REG_MISC_BASE + 6 +#define UE_REG_MISC_TEST UE_REG_MISC_BASE + 8 +#define UE_REG_MISC_RX_LEN UE_REG_MISC_BASE + 10 +#define UE_REG_MISC_TX_LEN UE_REG_MISC_BASE + 12 + +///////////////////////////////////////////////////// +// Slave 1 -- UART +// CLKDIV is 16 bits, others are only 8 + +#define UE_REG_UART_BASE UE_REG_SLAVE(1) + +#define UE_REG_UART_CLKDIV UE_REG_UART_BASE + 0 +#define UE_REG_UART_TXLEVEL UE_REG_UART_BASE + 2 +#define UE_REG_UART_RXLEVEL UE_REG_UART_BASE + 4 +#define UE_REG_UART_TXCHAR UE_REG_UART_BASE + 6 +#define UE_REG_UART_RXCHAR UE_REG_UART_BASE + 8 + +///////////////////////////////////////////////////// +// Slave 2 -- SPI Core +// This should be accessed through the IOCTL +// Users should not touch directly + +#define UE_REG_SPI_BASE UE_REG_SLAVE(2) + +//spi slave constants +#define UE_SPI_SS_AD9522 (1 << 3) +#define UE_SPI_SS_AD9862 (1 << 2) +#define UE_SPI_SS_TX_DB (1 << 1) +#define UE_SPI_SS_RX_DB (1 << 0) + +//////////////////////////////////////////////// +// Slave 3 -- I2C Core +// This should be accessed through the IOCTL +// Users should not touch directly + +#define UE_REG_I2C_BASE UE_REG_SLAVE(3) + + +//////////////////////////////////////////////// +// Slave 4 -- GPIO + +#define UE_REG_GPIO_BASE UE_REG_SLAVE(4) + +#define UE_REG_GPIO_RX_IO UE_REG_GPIO_BASE + 0 +#define UE_REG_GPIO_TX_IO UE_REG_GPIO_BASE + 2 +#define UE_REG_GPIO_RX_DDR UE_REG_GPIO_BASE + 4 +#define UE_REG_GPIO_TX_DDR UE_REG_GPIO_BASE + 6 +#define UE_REG_GPIO_RX_SEL UE_REG_GPIO_BASE + 8 +#define UE_REG_GPIO_TX_SEL UE_REG_GPIO_BASE + 10 +#define UE_REG_GPIO_RX_DBG UE_REG_GPIO_BASE + 12 +#define UE_REG_GPIO_TX_DBG UE_REG_GPIO_BASE + 14 + +//possible bit values for sel when dbg is 0: +#define GPIO_SEL_SW 0 // if pin is an output, set by software in the io reg +#define GPIO_SEL_ATR 1 // if pin is an output, set by ATR logic + +//possible bit values for sel when dbg is 1: +#define GPIO_SEL_DEBUG_0 0 // if pin is an output, debug lines from FPGA fabric +#define GPIO_SEL_DEBUG_1 1 // if pin is an output, debug lines from FPGA fabric + + +//////////////////////////////////////////////////// +// Slave 5 -- Settings Bus +// +// Output-only, no readback, 32 registers total +// Each register must be written 32 bits at a time +// First the address xxx_xx00 and then xxx_xx10 + +#define UE_REG_SETTINGS_BASE UE_REG_SLAVE(5) + +/////////////////////////////////////////////////// +// Slave 6 -- ATR Controller +// 16 regs + +#define UE_REG_ATR_BASE UE_REG_SLAVE(6) + +#define UE_REG_ATR_IDLE_RXSIDE UE_REG_ATR_BASE + 0 +#define UE_REG_ATR_IDLE_TXSIDE UE_REG_ATR_BASE + 2 +#define UE_REG_ATR_INTX_RXSIDE UE_REG_ATR_BASE + 4 +#define UE_REG_ATR_INTX_TXSIDE UE_REG_ATR_BASE + 6 +#define UE_REG_ATR_INRX_RXSIDE UE_REG_ATR_BASE + 8 +#define UE_REG_ATR_INRX_TXSIDE UE_REG_ATR_BASE + 10 +#define UE_REG_ATR_FULL_RXSIDE UE_REG_ATR_BASE + 12 +#define UE_REG_ATR_FULL_TXSIDE UE_REG_ATR_BASE + 14 + +///////////////////////////////////////////////// +// DSP RX Regs +//////////////////////////////////////////////// +#define UE_REG_DSP_RX_FREQ UE_REG_SR_ADDR(0) +#define UE_REG_DSP_RX_SCALE_IQ UE_REG_SR_ADDR(1) // {scale_i,scale_q} +#define UE_REG_DSP_RX_DECIM_RATE UE_REG_SR_ADDR(2) // hb and decim rate +#define UE_REG_DSP_RX_DCOFFSET_I UE_REG_SR_ADDR(3) // Bit 31 high sets fixed offset mode, using lower 14 bits, // otherwise it is automatic +#define UE_REG_DSP_RX_DCOFFSET_Q UE_REG_SR_ADDR(4) // Bit 31 high sets fixed offset mode, using lower 14 bits +#define UE_REG_DSP_RX_MUX UE_REG_SR_ADDR(5) + +/////////////////////////////////////////////////// +// VITA RX CTRL regs +/////////////////////////////////////////////////// +// The following 3 are logically a single command register. +// They are clocked into the underlying fifo when time_ticks is written. +#define UE_REG_CTRL_RX_STREAM_CMD UE_REG_SR_ADDR(8) // {now, chain, num_samples(30) +#define UE_REG_CTRL_RX_TIME_SECS UE_REG_SR_ADDR(9) +#define UE_REG_CTRL_RX_TIME_TICKS UE_REG_SR_ADDR(10) +#define UE_REG_CTRL_RX_CLEAR_OVERRUN UE_REG_SR_ADDR(11) // write anything to clear overrun +#define UE_REG_CTRL_RX_VRT_HEADER UE_REG_SR_ADDR(12) // word 0 of packet. FPGA fills in packet counter +#define UE_REG_CTRL_RX_VRT_STREAM_ID UE_REG_SR_ADDR(13) // word 1 of packet. +#define UE_REG_CTRL_RX_VRT_TRAILER UE_REG_SR_ADDR(14) +#define UE_REG_CTRL_RX_NSAMPS_PER_PKT UE_REG_SR_ADDR(15) +#define UE_REG_CTRL_RX_NCHANNELS UE_REG_SR_ADDR(16) // 1 in basic case, up to 4 for vector sources + +///////////////////////////////////////////////// +// DSP TX Regs +//////////////////////////////////////////////// +#define UE_REG_DSP_TX_FREQ UE_REG_SR_ADDR(17) +#define UE_REG_DSP_TX_SCALE_IQ UE_REG_SR_ADDR(18) // {scale_i,scale_q} +#define UE_REG_DSP_TX_INTERP_RATE UE_REG_SR_ADDR(19) +#define UE_REG_DSP_TX_UNUSED UE_REG_SR_ADDR(20) +#define UE_REG_DSP_TX_MUX UE_REG_SR_ADDR(21) + +///////////////////////////////////////////////// +// VITA TX CTRL regs +//////////////////////////////////////////////// +#define UE_REG_CTRL_TX_NCHANNELS UE_REG_SR_ADDR(24) +#define UE_REG_CTRL_TX_CLEAR_UNDERRUN UE_REG_SR_ADDR(25) +#define UE_REG_CTRL_TX_REPORT_SID UE_REG_SR_ADDR(26) +#define UE_REG_CTRL_TX_POLICY UE_REG_SR_ADDR(27) + +#define UE_FLAG_CTRL_TX_POLICY_WAIT (0x1 << 0) +#define UE_FLAG_CTRL_TX_POLICY_NEXT_PACKET (0x1 << 1) +#define UE_FLAG_CTRL_TX_POLICY_NEXT_BURST (0x1 << 2) + +///////////////////////////////////////////////// +// VITA49 64 bit time (write only) +//////////////////////////////////////////////// + /*! + * \brief Time 64 flags + * + * <pre> + * + * 3 2 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-----------------------------------------------------------+-+-+ + * | |S|P| + * +-----------------------------------------------------------+-+-+ + * + * P - PPS edge selection (0=negedge, 1=posedge, default=0) + * S - Source (0=sma, 1=mimo, 0=default) + * + * </pre> + */ +#define UE_REG_TIME64_SECS UE_REG_SR_ADDR(28) // value to set absolute secs to on next PPS +#define UE_REG_TIME64_TICKS UE_REG_SR_ADDR(29) // value to set absolute ticks to on next PPS +#define UE_REG_TIME64_FLAGS UE_REG_SR_ADDR(30) // flags - see chart above +#define UE_REG_TIME64_IMM UE_REG_SR_ADDR(31) // set immediate (0=latch on next pps, 1=latch immediate, default=0) +#define UE_REG_TIME64_TPS UE_REG_SR_ADDR(31) // clock ticks per second (counter rollover) + +//pps flags (see above) +#define UE_FLAG_TIME64_PPS_NEGEDGE (0 << 0) +#define UE_FLAG_TIME64_PPS_POSEDGE (1 << 0) +#define UE_FLAG_TIME64_PPS_SMA (0 << 1) +#define UE_FLAG_TIME64_PPS_MIMO (1 << 1) + +#define UE_FLAG_TIME64_LATCH_NOW 1 +#define UE_FLAG_TIME64_LATCH_NEXT_PPS 0 + +#endif + |