aboutsummaryrefslogtreecommitdiffstats
path: root/host
diff options
context:
space:
mode:
Diffstat (limited to 'host')
-rw-r--r--host/docs/coding.rst12
-rw-r--r--host/examples/benchmark_rx_rate.cpp8
-rw-r--r--host/examples/rx_timed_samples.cpp6
-rw-r--r--host/examples/test_async_messages.cpp12
-rw-r--r--host/examples/test_pps_input.cpp6
-rw-r--r--host/examples/tx_timed_samples.cpp6
-rw-r--r--host/examples/tx_waveforms.cpp6
-rw-r--r--host/include/uhd/device.hpp13
-rw-r--r--host/include/uhd/device.ipp26
-rw-r--r--host/include/uhd/usrp/CMakeLists.txt1
-rw-r--r--host/include/uhd/usrp/simple_usrp.hpp2
-rw-r--r--host/include/uhd/usrp/single_usrp.hpp172
-rw-r--r--host/lib/usrp/CMakeLists.txt1
-rw-r--r--host/lib/usrp/single_usrp.cpp309
-rw-r--r--host/lib/usrp/usrp1/dsp_impl.cpp10
-rw-r--r--host/lib/usrp/usrp1/mboard_impl.cpp39
-rw-r--r--host/lib/usrp/usrp1/usrp1_impl.hpp6
17 files changed, 546 insertions, 89 deletions
diff --git a/host/docs/coding.rst b/host/docs/coding.rst
index 23f350b0f..d6a19d250 100644
--- a/host/docs/coding.rst
+++ b/host/docs/coding.rst
@@ -23,11 +23,11 @@ The device API provides ways to:
See the documentation in *device.hpp* for reference.
^^^^^^^^^^^^^^^^^^^^^^^^^^^
-High-Level: The simple usrp
+High-Level: The single usrp
^^^^^^^^^^^^^^^^^^^^^^^^^^^
-The goal of the simple usrp API is to wrap high level functions around the device properties.
-The simple usrp provides a fat interface to access the most common properties.
-The simple usrp provides ways to:
+The goal of the single usrp API is to wrap high level functions around the device properties.
+The single usrp provides a fat interface to access the most common properties.
+The single usrp provides ways to:
* Set and get daughterboard gains.
* Set and get daughterboard antennas.
@@ -38,13 +38,13 @@ The simple usrp provides ways to:
* Set the usrp time registers.
* Get the underlying device (as discussed above).
-See the documentation in *usrp/simple_usrp.hpp* for reference.
+See the documentation in *usrp/single_usrp.hpp* for reference.
^^^^^^^^^^^^^^^^^^^^^^^^^^^
High-Level: The mimo usrp
^^^^^^^^^^^^^^^^^^^^^^^^^^^
The mimo usrp API provides a wrapper around a device that represents several motherboards.
-This API provides convenience calls just like the simple usrp,
+This API provides convenience calls just like the single usrp,
however the calls either work across all channels in the configuration,
or take a channel argument to specify which channel to configure.
The mimo usrp provides ways to:
diff --git a/host/examples/benchmark_rx_rate.cpp b/host/examples/benchmark_rx_rate.cpp
index 8fae813cf..36611f97f 100644
--- a/host/examples/benchmark_rx_rate.cpp
+++ b/host/examples/benchmark_rx_rate.cpp
@@ -17,7 +17,7 @@
#include <uhd/utils/thread_priority.hpp>
#include <uhd/utils/safe_main.hpp>
-#include <uhd/usrp/simple_usrp.hpp>
+#include <uhd/usrp/single_usrp.hpp>
#include <boost/math/special_functions/round.hpp>
#include <boost/program_options.hpp>
#include <boost/format.hpp>
@@ -27,7 +27,7 @@
namespace po = boost::program_options;
static inline void test_device(
- uhd::usrp::simple_usrp::sptr sdev,
+ uhd::usrp::single_usrp::sptr sdev,
double rx_rate_sps,
double duration_secs
){
@@ -118,7 +118,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
po::options_description desc("Allowed options");
desc.add_options()
("help", "help message")
- ("args", po::value<std::string>(&args)->default_value(""), "simple uhd device address args")
+ ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args")
("duration", po::value<double>(&duration)->default_value(10.0), "duration for each test in seconds")
("rate", po::value<double>(&only_rate), "specify to perform a single test as this rate (sps)")
;
@@ -135,7 +135,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
//create a usrp device
std::cout << std::endl;
std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl;
- uhd::usrp::simple_usrp::sptr sdev = uhd::usrp::simple_usrp::make(args);
+ uhd::usrp::single_usrp::sptr sdev = uhd::usrp::single_usrp::make(args);
std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl;
sdev->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); //stop if left running
diff --git a/host/examples/rx_timed_samples.cpp b/host/examples/rx_timed_samples.cpp
index 4856f6779..441665900 100644
--- a/host/examples/rx_timed_samples.cpp
+++ b/host/examples/rx_timed_samples.cpp
@@ -17,7 +17,7 @@
#include <uhd/utils/thread_priority.hpp>
#include <uhd/utils/safe_main.hpp>
-#include <uhd/usrp/simple_usrp.hpp>
+#include <uhd/usrp/single_usrp.hpp>
#include <boost/program_options.hpp>
#include <boost/format.hpp>
#include <iostream>
@@ -38,7 +38,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
po::options_description desc("Allowed options");
desc.add_options()
("help", "help message")
- ("args", po::value<std::string>(&args)->default_value(""), "simple uhd device address args")
+ ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args")
("secs", po::value<time_t>(&seconds_in_future)->default_value(3), "number of seconds in the future to receive")
("nsamps", po::value<size_t>(&total_num_samps)->default_value(1000), "total number of samples to receive")
("rxrate", po::value<double>(&rx_rate)->default_value(100e6/16), "rate of incoming samples")
@@ -60,7 +60,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
//create a usrp device
std::cout << std::endl;
std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl;
- uhd::usrp::simple_usrp::sptr sdev = uhd::usrp::simple_usrp::make(args);
+ uhd::usrp::single_usrp::sptr sdev = uhd::usrp::single_usrp::make(args);
uhd::device::sptr dev = sdev->get_device();
std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl;
diff --git a/host/examples/test_async_messages.cpp b/host/examples/test_async_messages.cpp
index e02bc5f40..4c9d18121 100644
--- a/host/examples/test_async_messages.cpp
+++ b/host/examples/test_async_messages.cpp
@@ -18,7 +18,7 @@
#include <uhd/utils/thread_priority.hpp>
#include <uhd/utils/safe_main.hpp>
#include <uhd/utils/static.hpp>
-#include <uhd/usrp/simple_usrp.hpp>
+#include <uhd/usrp/single_usrp.hpp>
#include <boost/program_options.hpp>
#include <boost/format.hpp>
#include <complex>
@@ -33,7 +33,7 @@ static const size_t async_to_ms = 100;
* Send a burst of many samples that will fragment internally.
* We expect to not get any async messages.
*/
-void test_no_async_message(uhd::usrp::simple_usrp::sptr sdev){
+void test_no_async_message(uhd::usrp::single_usrp::sptr sdev){
uhd::device::sptr dev = sdev->get_device();
std::cout << "Test no async message... " << std::flush;
@@ -73,7 +73,7 @@ void test_no_async_message(uhd::usrp::simple_usrp::sptr sdev){
* Send a start of burst packet with no following end of burst.
* We expect to get an underflow(within a burst) async message.
*/
-void test_underflow_message(uhd::usrp::simple_usrp::sptr sdev){
+void test_underflow_message(uhd::usrp::single_usrp::sptr sdev){
uhd::device::sptr dev = sdev->get_device();
std::cout << "Test underflow message... " << std::flush;
@@ -117,7 +117,7 @@ void test_underflow_message(uhd::usrp::simple_usrp::sptr sdev){
* Send a burst packet that occurs at a time in the past.
* We expect to get a time error async message.
*/
-void test_time_error_message(uhd::usrp::simple_usrp::sptr sdev){
+void test_time_error_message(uhd::usrp::single_usrp::sptr sdev){
uhd::device::sptr dev = sdev->get_device();
std::cout << "Test time error message... " << std::flush;
@@ -170,7 +170,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
po::options_description desc("Allowed options");
desc.add_options()
("help", "help message")
- ("args", po::value<std::string>(&args)->default_value(""), "simple uhd device address args")
+ ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args")
("rate", po::value<double>(&rate)->default_value(1.5e6), "rate of outgoing samples")
;
po::variables_map vm;
@@ -186,7 +186,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
//create a usrp device
std::cout << std::endl;
std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl;
- uhd::usrp::simple_usrp::sptr sdev = uhd::usrp::simple_usrp::make(args);
+ uhd::usrp::single_usrp::sptr sdev = uhd::usrp::single_usrp::make(args);
std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl;
//set the tx sample rate
diff --git a/host/examples/test_pps_input.cpp b/host/examples/test_pps_input.cpp
index e01d32910..d1b49d320 100644
--- a/host/examples/test_pps_input.cpp
+++ b/host/examples/test_pps_input.cpp
@@ -17,7 +17,7 @@
#include <uhd/utils/thread_priority.hpp>
#include <uhd/utils/safe_main.hpp>
-#include <uhd/usrp/simple_usrp.hpp>
+#include <uhd/usrp/single_usrp.hpp>
#include <boost/program_options.hpp>
#include <boost/format.hpp>
#include <boost/thread.hpp>
@@ -37,7 +37,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
po::options_description desc("Allowed options");
desc.add_options()
("help", "help message")
- ("args", po::value<std::string>(&args)->default_value(""), "simple uhd device address args")
+ ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args")
;
po::variables_map vm;
po::store(po::parse_command_line(argc, argv, desc), vm);
@@ -52,7 +52,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
//create a usrp device
std::cout << std::endl;
std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl;
- uhd::usrp::simple_usrp::sptr sdev = uhd::usrp::simple_usrp::make(args);
+ uhd::usrp::single_usrp::sptr sdev = uhd::usrp::single_usrp::make(args);
uhd::device::sptr dev = sdev->get_device();
std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl;
diff --git a/host/examples/tx_timed_samples.cpp b/host/examples/tx_timed_samples.cpp
index 5b72bd72f..f34c121d5 100644
--- a/host/examples/tx_timed_samples.cpp
+++ b/host/examples/tx_timed_samples.cpp
@@ -17,7 +17,7 @@
#include <uhd/utils/thread_priority.hpp>
#include <uhd/utils/safe_main.hpp>
-#include <uhd/usrp/simple_usrp.hpp>
+#include <uhd/usrp/single_usrp.hpp>
#include <boost/program_options.hpp>
#include <boost/format.hpp>
#include <iostream>
@@ -40,7 +40,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
po::options_description desc("Allowed options");
desc.add_options()
("help", "help message")
- ("args", po::value<std::string>(&args)->default_value(""), "simple uhd device address args")
+ ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args")
("secs", po::value<time_t>(&seconds_in_future)->default_value(3), "number of seconds in the future to transmit")
("nsamps", po::value<size_t>(&total_num_samps)->default_value(1000), "total number of samples to transmit")
("spp", po::value<size_t>(&samps_per_packet)->default_value(1000), "number of samples per packet")
@@ -64,7 +64,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
//create a usrp device
std::cout << std::endl;
std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl;
- uhd::usrp::simple_usrp::sptr sdev = uhd::usrp::simple_usrp::make(args);
+ uhd::usrp::single_usrp::sptr sdev = uhd::usrp::single_usrp::make(args);
uhd::device::sptr dev = sdev->get_device();
std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl;
diff --git a/host/examples/tx_waveforms.cpp b/host/examples/tx_waveforms.cpp
index 3f319cf68..50982cf88 100644
--- a/host/examples/tx_waveforms.cpp
+++ b/host/examples/tx_waveforms.cpp
@@ -18,7 +18,7 @@
#include <uhd/utils/thread_priority.hpp>
#include <uhd/utils/safe_main.hpp>
#include <uhd/utils/static.hpp>
-#include <uhd/usrp/simple_usrp.hpp>
+#include <uhd/usrp/single_usrp.hpp>
#include <boost/program_options.hpp>
#include <boost/thread/thread_time.hpp> //system time
#include <boost/math/special_functions/round.hpp>
@@ -70,7 +70,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
po::options_description desc("Allowed options");
desc.add_options()
("help", "help message")
- ("args", po::value<std::string>(&args)->default_value(""), "simple uhd device address args")
+ ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args")
("duration", po::value<size_t>(&total_duration)->default_value(3), "number of seconds to transmit")
("spb", po::value<size_t>(&spb)->default_value(10000), "samples per buffer")
("rate", po::value<double>(&rate)->default_value(1.5e6), "rate of outgoing samples")
@@ -93,7 +93,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
//create a usrp device
std::cout << std::endl;
std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl;
- uhd::usrp::simple_usrp::sptr sdev = uhd::usrp::simple_usrp::make(args);
+ uhd::usrp::single_usrp::sptr sdev = uhd::usrp::single_usrp::make(args);
uhd::device::sptr dev = sdev->get_device();
std::cout << boost::format("Using Device: %s") % sdev->get_pp_string() << std::endl;
diff --git a/host/include/uhd/device.hpp b/host/include/uhd/device.hpp
index c48b3dfff..2077cae62 100644
--- a/host/include/uhd/device.hpp
+++ b/host/include/uhd/device.hpp
@@ -26,7 +26,6 @@
#include <boost/utility.hpp>
#include <boost/shared_ptr.hpp>
#include <boost/function.hpp>
-#include <boost/asio/buffer.hpp>
#include <vector>
namespace uhd{
@@ -140,12 +139,6 @@ public:
send_mode_t send_mode
);
- //! Deprecated
- size_t send(
- const boost::asio::const_buffer &, const tx_metadata_t &,
- const io_type_t &, send_mode_t send_mode
- );
-
/*!
* Receive buffers containing IF data described by the metadata.
*
@@ -196,12 +189,6 @@ public:
size_t timeout_ms = default_recv_timeout_ms
);
- //! Deprecated
- size_t recv(
- const boost::asio::mutable_buffer &, rx_metadata_t &,
- const io_type_t &, recv_mode_t
- );
-
/*!
* Get the maximum number of samples per packet on send.
* \return the number of samples
diff --git a/host/include/uhd/device.ipp b/host/include/uhd/device.ipp
index 603c52859..60a3f535d 100644
--- a/host/include/uhd/device.ipp
+++ b/host/include/uhd/device.ipp
@@ -34,19 +34,6 @@ namespace uhd{
);
}
- UHD_DEPRECATED UHD_INLINE size_t device::send(
- const boost::asio::const_buffer &buff,
- const tx_metadata_t &metadata,
- const io_type_t &io_type,
- send_mode_t send_mode
- ){
- return this->send(
- boost::asio::buffer_cast<const void *>(buff),
- boost::asio::buffer_size(buff)/io_type.size,
- metadata, io_type, send_mode
- );
- }
-
UHD_INLINE size_t device::recv(
void *buff,
size_t nsamps_per_buff,
@@ -62,19 +49,6 @@ namespace uhd{
);
}
- UHD_DEPRECATED UHD_INLINE size_t device::recv(
- const boost::asio::mutable_buffer &buff,
- rx_metadata_t &metadata,
- const io_type_t &io_type,
- recv_mode_t recv_mode
- ){
- return this->recv(
- boost::asio::buffer_cast<void *>(buff),
- boost::asio::buffer_size(buff)/io_type.size,
- metadata, io_type, recv_mode
- );
- }
-
} //namespace uhd
#endif /* INCLUDED_UHD_DEVICE_IPP */
diff --git a/host/include/uhd/usrp/CMakeLists.txt b/host/include/uhd/usrp/CMakeLists.txt
index 130956f8a..f973e401a 100644
--- a/host/include/uhd/usrp/CMakeLists.txt
+++ b/host/include/uhd/usrp/CMakeLists.txt
@@ -40,6 +40,7 @@ INSTALL(FILES
### interfaces ###
simple_usrp.hpp
+ single_usrp.hpp
mimo_usrp.hpp
DESTINATION ${INCLUDE_DIR}/uhd/usrp
diff --git a/host/include/uhd/usrp/simple_usrp.hpp b/host/include/uhd/usrp/simple_usrp.hpp
index 08b9c01ea..169411f19 100644
--- a/host/include/uhd/usrp/simple_usrp.hpp
+++ b/host/include/uhd/usrp/simple_usrp.hpp
@@ -38,7 +38,7 @@ namespace uhd{ namespace usrp{
* The wrapper provides convenience functions to tune the devices
* as well as to set the dboard gains, antennas, and other properties.
*/
-class UHD_API simple_usrp : boost::noncopyable{
+class UHD_API UHD_DEPRECATED simple_usrp : boost::noncopyable{
public:
typedef boost::shared_ptr<simple_usrp> sptr;
diff --git a/host/include/uhd/usrp/single_usrp.hpp b/host/include/uhd/usrp/single_usrp.hpp
new file mode 100644
index 000000000..1b89a3620
--- /dev/null
+++ b/host/include/uhd/usrp/single_usrp.hpp
@@ -0,0 +1,172 @@
+//
+// Copyright 2010 Ettus Research LLC
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program. If not, see <http://www.gnu.org/licenses/>.
+//
+
+#ifndef INCLUDED_UHD_USRP_SINGLE_USRP_HPP
+#define INCLUDED_UHD_USRP_SINGLE_USRP_HPP
+
+#include <uhd/config.hpp>
+#include <uhd/device.hpp>
+#include <uhd/types/ranges.hpp>
+#include <uhd/types/stream_cmd.hpp>
+#include <uhd/types/clock_config.hpp>
+#include <uhd/types/tune_result.hpp>
+#include <uhd/usrp/subdev_spec.hpp>
+#include <uhd/usrp/dboard_iface.hpp>
+#include <boost/shared_ptr.hpp>
+#include <boost/utility.hpp>
+#include <vector>
+
+namespace uhd{ namespace usrp{
+
+/*!
+ * The single USRP device class:
+ * A single usrp facilitates ease-of-use for most use-case scenarios.
+ * The wrapper provides convenience functions to tune the devices
+ * as well as to set the dboard gains, antennas, and other properties.
+ * This wrapper supports multi-channel configurations per motherboard.
+ */
+class UHD_API single_usrp : boost::noncopyable{
+public:
+ typedef boost::shared_ptr<single_usrp> sptr;
+
+ /*!
+ * Make a new single usrp from the device address.
+ * \param dev_addr the device address
+ * \return a new single usrp object
+ */
+ static sptr make(const device_addr_t &dev_addr);
+
+ /*!
+ * Get the underlying device object.
+ * This is needed to get access to the streaming API and properties.
+ * \return the device object within this single usrp
+ */
+ virtual device::sptr get_device(void) = 0;
+
+ /*!
+ * Get a printable name for this usrp.
+ * \return a printable string
+ */
+ virtual std::string get_pp_string(void) = 0;
+
+ /*******************************************************************
+ * Misc
+ ******************************************************************/
+ /*!
+ * Gets the current time in the usrp time registers.
+ * \return a timespec representing current usrp time
+ */
+ virtual time_spec_t get_time_now(void) = 0;
+
+ /*!
+ * Sets the time registers on the usrp immediately.
+ * \param time_spec the time to latch into the usrp device
+ */
+ virtual void set_time_now(const time_spec_t &time_spec) = 0;
+
+ /*!
+ * Set the time registers on the usrp at the next pps tick.
+ * The values will not be latched in until the pulse occurs.
+ * It is recommended that the user sleep(1) after calling to ensure
+ * that the time registers will be in a known state prior to use.
+ *
+ * Note: Because this call sets the time on the "next" pps,
+ * the seconds in the time spec should be current seconds + 1.
+ *
+ * \param time_spec the time to latch into the usrp device
+ */
+ virtual void set_time_next_pps(const time_spec_t &time_spec) = 0;
+
+ /*!
+ * Issue a stream command to the usrp device.
+ * This tells the usrp to send samples into the host.
+ * See the documentation for stream_cmd_t for more info.
+ * \param stream_cmd the stream command to issue
+ */
+ virtual void issue_stream_cmd(const stream_cmd_t &stream_cmd) = 0;
+
+ /*!
+ * Set the clock configuration for the usrp device.
+ * This tells the usrp how to get a 10Mhz reference and PPS clock.
+ * See the documentation for clock_config_t for more info.
+ * \param clock_config the clock configuration to set
+ */
+ virtual void set_clock_config(const clock_config_t &clock_config) = 0;
+
+ /*******************************************************************
+ * RX methods
+ ******************************************************************/
+ virtual void set_rx_subdev_spec(const uhd::usrp::subdev_spec_t &spec) = 0;
+ virtual uhd::usrp::subdev_spec_t get_rx_subdev_spec(void) = 0;
+
+ virtual void set_rx_rate(double rate) = 0;
+ virtual double get_rx_rate(void) = 0;
+
+ virtual tune_result_t set_rx_freq(double freq, size_t chan = 0) = 0;
+ virtual tune_result_t set_rx_freq(double freq, double lo_off, size_t chan = 0) = 0;
+ virtual double get_rx_freq(size_t chan = 0) = 0;
+ virtual freq_range_t get_rx_freq_range(size_t chan = 0) = 0;
+
+ virtual void set_rx_gain(float gain, size_t chan = 0) = 0;
+ virtual float get_rx_gain(size_t chan = 0) = 0;
+ virtual gain_range_t get_rx_gain_range(size_t chan = 0) = 0;
+
+ virtual void set_rx_antenna(const std::string &ant, size_t chan = 0) = 0;
+ virtual std::string get_rx_antenna(size_t chan = 0) = 0;
+ virtual std::vector<std::string> get_rx_antennas(size_t chan = 0) = 0;
+
+ virtual bool get_rx_lo_locked(size_t chan = 0) = 0;
+
+ /*!
+ * Read the RSSI value from a usrp device.
+ * Or throw if the dboard does not support an RSSI readback.
+ * \return the rssi in dB
+ */
+ virtual float read_rssi(size_t chan = 0) = 0;
+
+ virtual dboard_iface::sptr get_rx_dboard_iface(size_t chan = 0) = 0;
+
+ /*******************************************************************
+ * TX methods
+ ******************************************************************/
+ virtual void set_tx_subdev_spec(const uhd::usrp::subdev_spec_t &spec) = 0;
+ virtual uhd::usrp::subdev_spec_t get_tx_subdev_spec(void) = 0;
+
+ virtual void set_tx_rate(double rate) = 0;
+ virtual double get_tx_rate(void) = 0;
+
+ virtual tune_result_t set_tx_freq(double freq, size_t chan = 0) = 0;
+ virtual tune_result_t set_tx_freq(double freq, double lo_off, size_t chan = 0) = 0;
+ virtual double get_tx_freq(size_t chan = 0) = 0;
+ virtual freq_range_t get_tx_freq_range(size_t chan = 0) = 0;
+
+ virtual void set_tx_gain(float gain, size_t chan = 0) = 0;
+ virtual float get_tx_gain(size_t chan = 0) = 0;
+ virtual gain_range_t get_tx_gain_range(size_t chan = 0) = 0;
+
+ virtual void set_tx_antenna(const std::string &ant, size_t chan = 0) = 0;
+ virtual std::string get_tx_antenna(size_t chan = 0) = 0;
+ virtual std::vector<std::string> get_tx_antennas(size_t chan = 0) = 0;
+
+ virtual bool get_tx_lo_locked(size_t chan = 0) = 0;
+
+ virtual dboard_iface::sptr get_tx_dboard_iface(size_t chan = 0) = 0;
+};
+
+}}
+
+#endif /* INCLUDED_UHD_USRP_SINGLE_USRP_HPP */
diff --git a/host/lib/usrp/CMakeLists.txt b/host/lib/usrp/CMakeLists.txt
index b5c545988..69a190bfa 100644
--- a/host/lib/usrp/CMakeLists.txt
+++ b/host/lib/usrp/CMakeLists.txt
@@ -26,6 +26,7 @@ LIBUHD_APPEND_SOURCES(
${CMAKE_SOURCE_DIR}/lib/usrp/mimo_usrp.cpp
${CMAKE_SOURCE_DIR}/lib/usrp/misc_utils.cpp
${CMAKE_SOURCE_DIR}/lib/usrp/simple_usrp.cpp
+ ${CMAKE_SOURCE_DIR}/lib/usrp/single_usrp.cpp
${CMAKE_SOURCE_DIR}/lib/usrp/subdev_spec.cpp
${CMAKE_SOURCE_DIR}/lib/usrp/tune_helper.cpp
)
diff --git a/host/lib/usrp/single_usrp.cpp b/host/lib/usrp/single_usrp.cpp
new file mode 100644
index 000000000..77e705c71
--- /dev/null
+++ b/host/lib/usrp/single_usrp.cpp
@@ -0,0 +1,309 @@
+//
+// Copyright 2010 Ettus Research LLC
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program. If not, see <http://www.gnu.org/licenses/>.
+//
+
+#include <uhd/usrp/single_usrp.hpp>
+#include <uhd/usrp/tune_helper.hpp>
+#include <uhd/utils/assert.hpp>
+#include <uhd/utils/gain_group.hpp>
+#include <uhd/usrp/subdev_props.hpp>
+#include <uhd/usrp/mboard_props.hpp>
+#include <uhd/usrp/device_props.hpp>
+#include <uhd/usrp/dboard_props.hpp>
+#include <uhd/usrp/dsp_props.hpp>
+#include <boost/foreach.hpp>
+#include <boost/format.hpp>
+#include <stdexcept>
+#include <iostream>
+
+using namespace uhd;
+using namespace uhd::usrp;
+
+static inline freq_range_t add_dsp_shift(const freq_range_t &range, wax::obj dsp){
+ double codec_rate = dsp[DSP_PROP_CODEC_RATE].as<double>();
+ return freq_range_t(range.min - codec_rate/2.0, range.max + codec_rate/2.0);
+}
+
+/***********************************************************************
+ * Simple USRP Implementation
+ **********************************************************************/
+class single_usrp_impl : public single_usrp{
+public:
+ single_usrp_impl(const device_addr_t &addr){
+ _dev = device::make(addr);
+ }
+
+ ~single_usrp_impl(void){
+ /* NOP */
+ }
+
+ device::sptr get_device(void){
+ return _dev;
+ }
+
+ std::string get_pp_string(void){
+ std::string buff = str(boost::format(
+ "Single USRP:\n"
+ " Device: %s\n"
+ " Mboard: %s\n"
+ )
+ % (*_dev)[DEVICE_PROP_NAME].as<std::string>()
+ % _mboard()[MBOARD_PROP_NAME].as<std::string>()
+ );
+
+ //----------- rx side of life ----------------------------------
+ buff += str(boost::format(
+ " RX DSP: %s\n"
+ )
+ % _rx_dsp()[DSP_PROP_NAME].as<std::string>()
+ );
+ for (size_t chan = 0; chan < this->get_rx_subdev_spec().size(); chan++){
+ buff += str(boost::format(
+ " RX Channel: %u\n"
+ " RX Dboard: %s\n"
+ " RX Subdev: %s\n"
+ ) % chan
+ % _rx_dboard(chan)[DBOARD_PROP_NAME].as<std::string>()
+ % _rx_subdev(chan)[SUBDEV_PROP_NAME].as<std::string>()
+ );
+ }
+
+ //----------- tx side of life ----------------------------------
+ buff += str(boost::format(
+ " TX DSP: %s\n"
+ )
+ % _tx_dsp()[DSP_PROP_NAME].as<std::string>()
+ );
+ for (size_t chan = 0; chan < this->get_tx_subdev_spec().size(); chan++){
+ buff += str(boost::format(
+ " TX Channel: %u\n"
+ " TX Dboard: %s\n"
+ " TX Subdev: %s\n"
+ ) % chan
+ % _tx_dboard(chan)[DBOARD_PROP_NAME].as<std::string>()
+ % _tx_subdev(chan)[SUBDEV_PROP_NAME].as<std::string>()
+ );
+ }
+
+ return buff;
+ }
+
+ /*******************************************************************
+ * Misc
+ ******************************************************************/
+ time_spec_t get_time_now(void){
+ return _mboard()[MBOARD_PROP_TIME_NOW].as<time_spec_t>();
+ }
+
+ void set_time_now(const time_spec_t &time_spec){
+ _mboard()[MBOARD_PROP_TIME_NOW] = time_spec;
+ }
+
+ void set_time_next_pps(const time_spec_t &time_spec){
+ _mboard()[MBOARD_PROP_TIME_NEXT_PPS] = time_spec;
+ }
+
+ void issue_stream_cmd(const stream_cmd_t &stream_cmd){
+ _mboard()[MBOARD_PROP_STREAM_CMD] = stream_cmd;
+ }
+
+ void set_clock_config(const clock_config_t &clock_config){
+ _mboard()[MBOARD_PROP_CLOCK_CONFIG] = clock_config;
+ }
+
+ /*******************************************************************
+ * RX methods
+ ******************************************************************/
+ void set_rx_subdev_spec(const subdev_spec_t &spec){
+ _mboard()[MBOARD_PROP_RX_SUBDEV_SPEC] = spec;
+ std::cout << "RX " << this->get_rx_subdev_spec().to_pp_string() << std::endl;
+ }
+
+ subdev_spec_t get_rx_subdev_spec(void){
+ return _mboard()[MBOARD_PROP_RX_SUBDEV_SPEC].as<subdev_spec_t>();
+ }
+
+ void set_rx_rate(double rate){
+ _rx_dsp()[DSP_PROP_HOST_RATE] = rate;
+ }
+
+ double get_rx_rate(void){
+ return _rx_dsp()[DSP_PROP_HOST_RATE].as<double>();
+ }
+
+ tune_result_t set_rx_freq(double target_freq, size_t chan){
+ return tune_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(/*TODO*/), target_freq);
+ }
+
+ tune_result_t set_rx_freq(double target_freq, double lo_off, size_t chan){
+ return tune_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(/*TODO*/), target_freq, lo_off);
+ }
+
+ double get_rx_freq(size_t chan){
+ return derive_freq_from_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(/*TODO*/));
+ }
+
+ freq_range_t get_rx_freq_range(size_t chan){
+ return add_dsp_shift(_rx_subdev(chan)[SUBDEV_PROP_FREQ_RANGE].as<freq_range_t>(), _rx_dsp());
+ }
+
+ void set_rx_gain(float gain, size_t chan){
+ return _rx_gain_group(chan)->set_value(gain);
+ }
+
+ float get_rx_gain(size_t chan){
+ return _rx_gain_group(chan)->get_value();
+ }
+
+ gain_range_t get_rx_gain_range(size_t chan){
+ return _rx_gain_group(chan)->get_range();
+ }
+
+ void set_rx_antenna(const std::string &ant, size_t chan){
+ _rx_subdev(chan)[SUBDEV_PROP_ANTENNA] = ant;
+ }
+
+ std::string get_rx_antenna(size_t chan){
+ return _rx_subdev(chan)[SUBDEV_PROP_ANTENNA].as<std::string>();
+ }
+
+ std::vector<std::string> get_rx_antennas(size_t chan){
+ return _rx_subdev(chan)[SUBDEV_PROP_ANTENNA_NAMES].as<prop_names_t>();
+ }
+
+ bool get_rx_lo_locked(size_t chan){
+ return _rx_subdev(chan)[SUBDEV_PROP_LO_LOCKED].as<bool>();
+ }
+
+ float read_rssi(size_t chan){
+ return _rx_subdev(chan)[SUBDEV_PROP_RSSI].as<float>();
+ }
+
+ dboard_iface::sptr get_rx_dboard_iface(size_t chan){
+ return _rx_dboard(chan)[DBOARD_PROP_DBOARD_IFACE].as<dboard_iface::sptr>();
+ }
+
+ /*******************************************************************
+ * TX methods
+ ******************************************************************/
+ void set_tx_subdev_spec(const subdev_spec_t &spec){
+ _mboard()[MBOARD_PROP_TX_SUBDEV_SPEC] = spec;
+ std::cout << "TX " << this->get_tx_subdev_spec().to_pp_string() << std::endl;
+ }
+
+ subdev_spec_t get_tx_subdev_spec(void){
+ return _mboard()[MBOARD_PROP_TX_SUBDEV_SPEC].as<subdev_spec_t>();
+ }
+
+ void set_tx_rate(double rate){
+ _tx_dsp()[DSP_PROP_HOST_RATE] = rate;
+ }
+
+ double get_tx_rate(void){
+ return _tx_dsp()[DSP_PROP_HOST_RATE].as<double>();
+ }
+
+ tune_result_t set_tx_freq(double target_freq, size_t chan){
+ return tune_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(/*TODO*/), target_freq);
+ }
+
+ tune_result_t set_tx_freq(double target_freq, double lo_off, size_t chan){
+ return tune_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(/*TODO*/), target_freq, lo_off);
+ }
+
+ double get_tx_freq(size_t chan){
+ return derive_freq_from_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(/*TODO*/));
+ }
+
+ freq_range_t get_tx_freq_range(size_t chan){
+ return add_dsp_shift(_tx_subdev(chan)[SUBDEV_PROP_FREQ_RANGE].as<freq_range_t>(), _tx_dsp());
+ }
+
+ void set_tx_gain(float gain, size_t chan){
+ return _tx_gain_group(chan)->set_value(gain);
+ }
+
+ float get_tx_gain(size_t chan){
+ return _tx_gain_group(chan)->get_value();
+ }
+
+ gain_range_t get_tx_gain_range(size_t chan){
+ return _tx_gain_group(chan)->get_range();
+ }
+
+ void set_tx_antenna(const std::string &ant, size_t chan){
+ _tx_subdev(chan)[SUBDEV_PROP_ANTENNA] = ant;
+ }
+
+ std::string get_tx_antenna(size_t chan){
+ return _tx_subdev(chan)[SUBDEV_PROP_ANTENNA].as<std::string>();
+ }
+
+ std::vector<std::string> get_tx_antennas(size_t chan){
+ return _tx_subdev(chan)[SUBDEV_PROP_ANTENNA_NAMES].as<prop_names_t>();
+ }
+
+ bool get_tx_lo_locked(size_t chan){
+ return _tx_subdev(chan)[SUBDEV_PROP_LO_LOCKED].as<bool>();
+ }
+
+ dboard_iface::sptr get_tx_dboard_iface(size_t chan){
+ return _tx_dboard(chan)[DBOARD_PROP_DBOARD_IFACE].as<dboard_iface::sptr>();
+ }
+
+private:
+ device::sptr _dev;
+ wax::obj _mboard(void){
+ return (*_dev)[DEVICE_PROP_MBOARD];
+ }
+ wax::obj _rx_dsp(void){
+ return _mboard()[MBOARD_PROP_RX_DSP];
+ }
+ wax::obj _tx_dsp(void){
+ return _mboard()[MBOARD_PROP_TX_DSP];
+ }
+ wax::obj _rx_dboard(size_t chan){
+ std::string db_name = this->get_rx_subdev_spec().at(chan).db_name;
+ return _mboard()[named_prop_t(MBOARD_PROP_RX_DBOARD, db_name)];
+ }
+ wax::obj _tx_dboard(size_t chan){
+ std::string db_name = this->get_tx_subdev_spec().at(chan).db_name;
+ return _mboard()[named_prop_t(MBOARD_PROP_TX_DBOARD, db_name)];
+ }
+ wax::obj _rx_subdev(size_t chan){
+ std::string sd_name = this->get_rx_subdev_spec().at(chan).sd_name;
+ return _rx_dboard(chan)[named_prop_t(DBOARD_PROP_SUBDEV, sd_name)];
+ }
+ wax::obj _tx_subdev(size_t chan){
+ std::string sd_name = this->get_tx_subdev_spec().at(chan).sd_name;
+ return _tx_dboard(chan)[named_prop_t(DBOARD_PROP_SUBDEV, sd_name)];
+ }
+ gain_group::sptr _rx_gain_group(size_t chan){
+ std::string sd_name = this->get_rx_subdev_spec().at(chan).sd_name;
+ return _rx_dboard(chan)[named_prop_t(DBOARD_PROP_GAIN_GROUP, sd_name)].as<gain_group::sptr>();
+ }
+ gain_group::sptr _tx_gain_group(size_t chan){
+ std::string sd_name = this->get_tx_subdev_spec().at(chan).sd_name;
+ return _tx_dboard(chan)[named_prop_t(DBOARD_PROP_GAIN_GROUP, sd_name)].as<gain_group::sptr>();
+ }
+};
+
+/***********************************************************************
+ * The Make Function
+ **********************************************************************/
+single_usrp::sptr single_usrp::make(const device_addr_t &dev_addr){
+ return sptr(new single_usrp_impl(dev_addr));
+}
diff --git a/host/lib/usrp/usrp1/dsp_impl.cpp b/host/lib/usrp/usrp1/dsp_impl.cpp
index d5a88fa2d..ba05fa6ed 100644
--- a/host/lib/usrp/usrp1/dsp_impl.cpp
+++ b/host/lib/usrp/usrp1/dsp_impl.cpp
@@ -46,7 +46,10 @@ void usrp1_impl::rx_dsp_get(const wax::obj &key, wax::obj &val)
{
switch(key.as<dsp_prop_t>()){
case DSP_PROP_NAME:
- val = std::string("usrp1 ddc0");
+ val = str(boost::format("usrp1 ddc %uX %s")
+ % this->get_num_ddcs()
+ % (this->has_rx_halfband()? "+ hb" : "")
+ );
return;
case DSP_PROP_OTHERS:
@@ -137,7 +140,10 @@ void usrp1_impl::tx_dsp_get(const wax::obj &key, wax::obj &val)
{
switch(key.as<dsp_prop_t>()) {
case DSP_PROP_NAME:
- val = std::string("usrp1 duc0");
+ val = str(boost::format("usrp1 duc %uX %s")
+ % this->get_num_ducs()
+ % (this->has_tx_halfband()? "+ hb" : "")
+ );
return;
case DSP_PROP_OTHERS:
diff --git a/host/lib/usrp/usrp1/mboard_impl.cpp b/host/lib/usrp/usrp1/mboard_impl.cpp
index a90532cb8..464a82494 100644
--- a/host/lib/usrp/usrp1/mboard_impl.cpp
+++ b/host/lib/usrp/usrp1/mboard_impl.cpp
@@ -172,23 +172,23 @@ static boost::uint32_t calc_tx_mux(
* | Reserved |T|DUCs |R|DDCs |
* +-----------------------------------------------+-+-----+-+-----+
*/
-static int num_ddcs(boost::uint32_t regval)
-{
+size_t usrp1_impl::get_num_ddcs(void){
+ boost::uint32_t regval = _iface->peek32(FR_RB_CAPS);
return (regval >> 0) & 0x0007;
}
-static int num_ducs(boost::uint32_t regval)
-{
+size_t usrp1_impl::get_num_ducs(void){
+ boost::uint32_t regval = _iface->peek32(FR_RB_CAPS);
return (regval >> 4) & 0x0007;
}
-static bool has_rx_halfband(boost::uint32_t regval)
-{
+bool usrp1_impl::has_rx_halfband(void){
+ boost::uint32_t regval = _iface->peek32(FR_RB_CAPS);
return (regval >> 3) & 0x0001;
}
-static bool has_tx_halfband(boost::uint32_t regval)
-{
+bool usrp1_impl::has_tx_halfband(void){
+ boost::uint32_t regval = _iface->peek32(FR_RB_CAPS);
return (regval >> 7) & 0x0001;
}
@@ -224,22 +224,23 @@ void usrp1_impl::mboard_init(void)
//
// Do something useful with the capabilities register
//
- boost::uint32_t regval = _iface->peek32(FR_RB_CAPS);
std::cout << "USRP1 Capabilities" << std::endl;
- std::cout << " number of duc's: " << num_ddcs(regval) << std::endl;
- std::cout << " number of ddc's: " << num_ducs(regval) << std::endl;
- std::cout << " rx halfband: " << has_rx_halfband(regval) << std::endl;
- std::cout << " tx halfband: " << has_tx_halfband(regval) << std::endl;
+ std::cout << " number of duc's: " << get_num_ddcs() << std::endl;
+ std::cout << " number of ddc's: " << get_num_ducs() << std::endl;
+ std::cout << " rx halfband: " << has_rx_halfband() << std::endl;
+ std::cout << " tx halfband: " << has_tx_halfband() << std::endl;
}
void usrp1_impl::issue_stream_cmd(const stream_cmd_t &stream_cmd)
{
- if (stream_cmd.stream_mode == stream_cmd_t::STREAM_MODE_START_CONTINUOUS) {
- _iface->write_firmware_cmd(VRQ_FPGA_SET_RX_ENABLE, true, 0, 0, 0);
- }
+ switch(stream_cmd.stream_mode){
+ case stream_cmd_t::STREAM_MODE_START_CONTINUOUS:
+ return _iface->write_firmware_cmd(VRQ_FPGA_SET_RX_ENABLE, true, 0, 0, 0);
+
+ case stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS:
+ return _iface->write_firmware_cmd(VRQ_FPGA_SET_RX_ENABLE, false, 0, 0, 0);
- if (stream_cmd.stream_mode == stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS) {
- _iface->write_firmware_cmd(VRQ_FPGA_SET_RX_ENABLE, false, 0, 0, 0);
+ default: throw std::runtime_error("unsupported stream command type for USRP1");
}
}
@@ -269,7 +270,7 @@ void usrp1_impl::mboard_get(const wax::obj &key_, wax::obj &val)
//handle the get request conditioned on the key
switch(key.as<mboard_prop_t>()){
case MBOARD_PROP_NAME:
- val = std::string("usrp1 mboard");
+ val = std::string("usrp1 mboard - " + (*_mboard_proxy)[std::string("serial")].as<std::string>());
return;
case MBOARD_PROP_OTHERS:
diff --git a/host/lib/usrp/usrp1/usrp1_impl.hpp b/host/lib/usrp/usrp1/usrp1_impl.hpp
index c2f693eeb..663fbb34b 100644
--- a/host/lib/usrp/usrp1/usrp1_impl.hpp
+++ b/host/lib/usrp/usrp1/usrp1_impl.hpp
@@ -192,6 +192,12 @@ private:
//transports
uhd::transport::usb_zero_copy::sptr _data_transport;
usrp_ctrl::sptr _ctrl_transport;
+
+ //capabilities
+ size_t get_num_ducs(void);
+ size_t get_num_ddcs(void);
+ bool has_rx_halfband(void);
+ bool has_tx_halfband(void);
};
#endif /* INCLUDED_USRP1_IMPL_HPP */
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 15:02:51 +0000