diff options
Diffstat (limited to 'host')
41 files changed, 1130 insertions, 1595 deletions
diff --git a/host/CMakeLists.txt b/host/CMakeLists.txt index 58b7c8234..5a6c4f7ec 100644 --- a/host/CMakeLists.txt +++ b/host/CMakeLists.txt @@ -198,7 +198,7 @@ INSTALL(FILES # Images download directory for utils/uhd_images_downloader.py ######################################################################## -SET(UHD_IMAGES_DOWNLOAD_SRC "http://files.ettus.com/binaries/master_images/archive/uhd-images_003.004.002-180-gb6bb13bc.zip") +SET(UHD_IMAGES_DOWNLOAD_SRC "http://files.ettus.com/binaries/next_images/archive/uhd-images_003.004.003-205-g4896bf78.zip") ######################################################################## # Register top level components @@ -231,8 +231,6 @@ IF(ENABLE_UTILS) ADD_SUBDIRECTORY(utils) ENDIF(ENABLE_UTILS) -ADD_SUBDIRECTORY(usrp_e_utils) - ######################################################################## # Create Pkg Config File ######################################################################## diff --git a/host/docs/CMakeLists.txt b/host/docs/CMakeLists.txt index e393a79f0..f56358ca9 100644 --- a/host/docs/CMakeLists.txt +++ b/host/docs/CMakeLists.txt @@ -1,5 +1,5 @@ # -# Copyright 2010-2011 Ettus Research LLC +# Copyright 2010-2012 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -33,8 +33,8 @@ SET(manual_sources transport.rst usrp1.rst usrp2.rst - usrp_b1xx.rst - usrp_e1xx.rst + usrp_b100.rst + usrp_e1x0.rst ) ######################################################################## diff --git a/host/docs/index.rst b/host/docs/index.rst index 8649e7ce3..00b1c9618 100644 --- a/host/docs/index.rst +++ b/host/docs/index.rst @@ -25,9 +25,9 @@ Application Notes * `Firmware and FPGA Image Notes <./images.html>`_ * `USRP1 Application Notes <./usrp1.html>`_ * `USRP2 Application Notes <./usrp2.html>`_ -* `USRP-N2XX Series Application Notes <./usrp2.html>`_ -* `USRP-B1XX Series Application Notes <./usrp_b1xx.html>`_ -* `USRP-E1XX Series Application Notes <./usrp_e1xx.html>`_ +* `USRP-N2X0 Series Application Notes <./usrp2.html>`_ +* `USRP-B100 Series Application Notes <./usrp_b100.html>`_ +* `USRP-E1X0 Series Application Notes <./usrp_e1x0.html>`_ * `Daughterboard Application Notes <./dboards.html>`_ * `Transport Application Notes <./transport.html>`_ * `Synchronization Application Notes <./sync.html>`_ diff --git a/host/docs/usrp1.rst b/host/docs/usrp1.rst index 6242ccb6a..c1fdec146 100644 --- a/host/docs/usrp1.rst +++ b/host/docs/usrp1.rst @@ -5,6 +5,17 @@ UHD - USRP1 Application Notes .. contents:: Table of Contents ------------------------------------------------------------------------ +Comparative features list +------------------------------------------------------------------------ + +* 2 transceiver card slots +* 2 RX DDC chains in FPGA +* 2 TX DUC chains in FPGA (no TX CORDIC -> uses DAC) +* 64 MHz fixed clock rate +* sc16 sample modes +* sc8 sample mode - RX only + +------------------------------------------------------------------------ Specify a Non-standard Image ------------------------------------------------------------------------ The standard USRP1 images installer comes with two FPGA images: diff --git a/host/docs/usrp2.rst b/host/docs/usrp2.rst index d70a08cd7..8e9aa6d50 100644 --- a/host/docs/usrp2.rst +++ b/host/docs/usrp2.rst @@ -1,10 +1,26 @@ ======================================================================== -UHD - USRP2 and N Series Application Notes +UHD - USRP2 and N2X0 Series Application Notes ======================================================================== .. contents:: Table of Contents ------------------------------------------------------------------------ +Comparative features list +------------------------------------------------------------------------ + +* 1 transceiver card slot +* 2 RX DDC chains in FPGA +* 1 TX DUC chain in FPGA +* Timed commands in FPGA (N2x0 only) +* Timed sampling in FPGA +* External PPS reference +* External 10MHz reference +* MIMO cable shared reference +* Fixed 100 MHz clock rate +* Internal GPSDO option (N2x0 only) +* sc8 and sc16 sample modes + +------------------------------------------------------------------------ Load the Images onto the SD card (USRP2 only) ------------------------------------------------------------------------ **Warning!** diff --git a/host/docs/usrp_b1xx.rst b/host/docs/usrp_b100.rst index 08eeb441b..cdb853b61 100644 --- a/host/docs/usrp_b1xx.rst +++ b/host/docs/usrp_b100.rst @@ -1,10 +1,24 @@ ======================================================================== -UHD - USRP-B1XX Series Application Notes +UHD - USRP-B100 Series Application Notes ======================================================================== .. contents:: Table of Contents ------------------------------------------------------------------------ +Comparative features list +------------------------------------------------------------------------ + +* 1 transceiver card slot +* 1 RX DDC chain in FPGA +* 1 TX DUC chain in FPGA +* Timed commands in FPGA +* Timed sampling in FPGA +* External PPS reference +* External 10MHz reference +* Configurable clock rate (defaults 64 MHz) +* sc8 and sc16 sample modes + +------------------------------------------------------------------------ Specify a Non-standard Image ------------------------------------------------------------------------ UHD will automatically select the USRP B-Series images from the installed images package. diff --git a/host/docs/usrp_e1xx.rst b/host/docs/usrp_e1x0.rst index 31a47347f..189cbb86b 100644 --- a/host/docs/usrp_e1xx.rst +++ b/host/docs/usrp_e1x0.rst @@ -1,10 +1,25 @@ ======================================================================== -UHD - USRP-E1XX Series Application Notes +UHD - USRP-E1X0 Series Application Notes ======================================================================== .. contents:: Table of Contents ------------------------------------------------------------------------ +Comparative features list +------------------------------------------------------------------------ + +* 1 transceiver card slot +* 2 RX DDC chains in FPGA +* 1 TX DUC chain in FPGA +* Timed commands in FPGA +* Timed sampling in FPGA +* Internal PPS reference +* Internal 10MHz reference +* Configurable clock rate (defaults 64 MHz) +* Internal GPSDO option +* sc8 and sc16 sample modes + +------------------------------------------------------------------------ Specify a Non-standard Image ------------------------------------------------------------------------ UHD will automatically select the USRP-Embedded FPGA image from the @@ -115,7 +130,7 @@ The LEDs on the front panel can be useful in debugging hardware and software issues. The LEDs reveal the following about the state of the device: * **LED A:** transmitting -* **LED B:** fpga loaded +* **LED B:** PPS signal * **LED C:** receiving * **LED D:** fpga loaded * **LED E:** reference lock diff --git a/host/include/uhd/types/ranges.hpp b/host/include/uhd/types/ranges.hpp index f0d0e1c0b..ac632df93 100644 --- a/host/include/uhd/types/ranges.hpp +++ b/host/include/uhd/types/ranges.hpp @@ -1,5 +1,5 @@ // -// Copyright 2010-2011 Ettus Research LLC +// Copyright 2010-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -19,7 +19,6 @@ #define INCLUDED_UHD_TYPES_RANGES_HPP #include <uhd/config.hpp> -#include <uhd/utils/pimpl.hpp> #include <string> #include <vector> @@ -60,7 +59,7 @@ namespace uhd{ //! Convert this range to a printable string const std::string to_pp_string(void) const; - private: UHD_PIMPL_DECL(impl) _impl; + private: double _start, _stop, _step; }; /*! diff --git a/host/include/uhd/utils/CMakeLists.txt b/host/include/uhd/utils/CMakeLists.txt index 5a434fd9a..de91993fe 100644 --- a/host/include/uhd/utils/CMakeLists.txt +++ b/host/include/uhd/utils/CMakeLists.txt @@ -1,5 +1,5 @@ # -# Copyright 2010-2011 Ettus Research LLC +# Copyright 2010-2012 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -19,6 +19,7 @@ INSTALL(FILES algorithm.hpp assert_has.hpp assert_has.ipp + atomic.hpp byteswap.hpp byteswap.ipp csv.hpp diff --git a/host/include/uhd/utils/atomic.hpp b/host/include/uhd/utils/atomic.hpp new file mode 100644 index 000000000..b12dde58e --- /dev/null +++ b/host/include/uhd/utils/atomic.hpp @@ -0,0 +1,149 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_ATOMIC_HPP +#define INCLUDED_UHD_UTILS_ATOMIC_HPP + +#include <uhd/config.hpp> +#include <uhd/types/time_spec.hpp> +#include <boost/thread/thread.hpp> +#include <boost/interprocess/detail/atomic.hpp> + +#if BOOST_VERSION >= 104800 +# define BOOST_IPC_DETAIL boost::interprocess::ipcdetail +#else +# define BOOST_IPC_DETAIL boost::interprocess::detail +#endif + +namespace uhd{ + + //! A 32-bit integer that can be atomically accessed + class UHD_API atomic_uint32_t{ + public: + + //! Create a new atomic 32-bit integer, initialized to zero + UHD_INLINE atomic_uint32_t(void){ + this->write(0); + } + + //! Compare with cmp, swap with newval if same, return old value + UHD_INLINE boost::uint32_t cas(boost::uint32_t newval, boost::uint32_t cmp){ + return BOOST_IPC_DETAIL::atomic_cas32(&_num, newval, cmp); + } + + //! Sets the atomic integer to a new value + UHD_INLINE void write(const boost::uint32_t newval){ + BOOST_IPC_DETAIL::atomic_write32(&_num, newval); + } + + //! Gets the current value of the atomic integer + UHD_INLINE boost::uint32_t read(void){ + return BOOST_IPC_DETAIL::atomic_read32(&_num); + } + + //! Increment by 1 and return the old value + UHD_INLINE boost::uint32_t inc(void){ + return BOOST_IPC_DETAIL::atomic_inc32(&_num); + } + + //! Decrement by 1 and return the old value + UHD_INLINE boost::uint32_t dec(void){ + return BOOST_IPC_DETAIL::atomic_dec32(&_num); + } + + private: volatile boost::uint32_t _num; + }; + + /*! + * A reusable barrier to sync multiple threads. + * All threads spin on wait() until count is reset. + */ + class UHD_API reusable_barrier{ + public: + + //! Resize the barrier for N threads + void resize(const size_t size){ + _size = size; + _count.write(size); + } + + //! Wait on the barrier condition + UHD_INLINE void wait(void){ + _count.dec(); + _count.cas(_size, 0); + while (_count.read() != _size){ + boost::this_thread::interruption_point(); + boost::this_thread::yield(); + } + } + + private: + size_t _size; + atomic_uint32_t _count; + }; + + /*! + * Spin-wait on a condition with a timeout. + * \param cond an atomic variable to compare + * \param value compare to atomic for true/false + * \param timeout the timeout in seconds + * \return true for cond == value, false for timeout + */ + UHD_INLINE bool spin_wait_with_timeout( + atomic_uint32_t &cond, + boost::uint32_t value, + const double timeout + ){ + if (cond.read() == value) return true; + const time_spec_t exit_time = time_spec_t::get_system_time() + time_spec_t(timeout); + while (cond.read() != value){ + if (time_spec_t::get_system_time() > exit_time) return false; + boost::this_thread::interruption_point(); + boost::this_thread::yield(); + } + return true; + } + + /*! + * Claimer class to provide synchronization for multi-thread access. + * Claiming enables buffer classes to be used with a buffer queue. + */ + class simple_claimer{ + public: + simple_claimer(void){ + this->release(); + } + + UHD_INLINE void release(void){ + _locked.write(0); + } + + UHD_INLINE bool claim_with_wait(const double timeout){ + if (spin_wait_with_timeout(_locked, 0, timeout)){ + _locked.write(1); + return true; + } + return false; + } + + private: + atomic_uint32_t _locked; + }; + +} //namespace uhd + +#endif /* INCLUDED_UHD_UTILS_ATOMIC_HPP */ diff --git a/host/include/uhd/version.hpp b/host/include/uhd/version.hpp index f08d8ae46..ab693f2b0 100644 --- a/host/include/uhd/version.hpp +++ b/host/include/uhd/version.hpp @@ -27,7 +27,7 @@ * The format is oldest API compatible release - ABI compat number. * The compatibility number allows pre-release ABI to be versioned. */ -#define UHD_VERSION_ABI_STRING "3.4.0-2" +#define UHD_VERSION_ABI_STRING "3.4.0-3" namespace uhd{ diff --git a/host/lib/transport/simple_claimer.hpp b/host/lib/transport/simple_claimer.hpp deleted file mode 100644 index 3bbc49a05..000000000 --- a/host/lib/transport/simple_claimer.hpp +++ /dev/null @@ -1,64 +0,0 @@ -// -// Copyright 2012 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#ifndef INCLUDED_LIBUHD_TRANSPORT_SIMPLE_CLAIMER_HPP -#define INCLUDED_LIBUHD_TRANSPORT_SIMPLE_CLAIMER_HPP - -#include <uhd/config.hpp> -#include <boost/thread/condition.hpp> -#include <boost/thread/mutex.hpp> - -namespace uhd{ namespace transport{ - -/*********************************************************************** - * Claimer class to provide synchronization for multi-thread access. - * Claiming enables buffer classes to be used with a buffer queue. - **********************************************************************/ -class simple_claimer{ -public: - simple_claimer(void){ - this->release(); - } - - UHD_INLINE void release(void){ - boost::mutex::scoped_lock lock(_mutex); - _locked = false; - lock.unlock(); - _cond.notify_one(); - } - - UHD_INLINE bool claim_with_wait(const double timeout){ - boost::mutex::scoped_lock lock(_mutex); - while (_locked){ - if (not _cond.timed_wait(lock, boost::posix_time::microseconds(long(timeout*1e6)))){ - break; - } - } - const bool ret = not _locked; - _locked = true; - return ret; - } - -private: - bool _locked; - boost::mutex _mutex; - boost::condition_variable _cond; -}; - -}} //namespace uhd::transport - -#endif /* INCLUDED_LIBUHD_TRANSPORT_SIMPLE_CLAIMER_HPP */ diff --git a/host/lib/transport/super_recv_packet_handler.hpp b/host/lib/transport/super_recv_packet_handler.hpp index 205c7a3a3..4b96199e2 100644 --- a/host/lib/transport/super_recv_packet_handler.hpp +++ b/host/lib/transport/super_recv_packet_handler.hpp @@ -23,6 +23,8 @@ #include <uhd/convert.hpp> #include <uhd/stream.hpp> #include <uhd/utils/msg.hpp> +#include <uhd/utils/tasks.hpp> +#include <uhd/utils/atomic.hpp> #include <uhd/utils/byteswap.hpp> #include <uhd/types/metadata.hpp> #include <uhd/transport/vrt_if_packet.hpp> @@ -31,6 +33,9 @@ #include <boost/foreach.hpp> #include <boost/function.hpp> #include <boost/format.hpp> +#include <boost/bind.hpp> +#include <boost/make_shared.hpp> +#include <boost/thread/barrier.hpp> #include <iostream> #include <vector> @@ -73,12 +78,23 @@ public: set_alignment_failure_threshold(1000); } + ~recv_packet_handler(void){ + _task_handlers.clear(); + } + //! Resize the number of transport channels void resize(const size_t size){ if (this->size() == size) return; + _task_handlers.clear(); _props.resize(size); //re-initialize all buffers infos by re-creating the vector _buffers_infos = std::vector<buffers_info_type>(4, buffers_info_type(size)); + _task_barrier_entry.resize(size); + _task_barrier_exit.resize(size); + _task_handlers.resize(size); + for (size_t i = 1/*skip 0*/; i < size; i++){ + _task_handlers[i] = task::make(boost::bind(&recv_packet_handler::converter_thread_task, this, i)); + }; } //! Get the channel width of this handler @@ -125,7 +141,7 @@ public: //! Set the conversion routine for all channels void set_converter(const uhd::convert::id_type &id){ - _io_buffs.resize(id.num_outputs); + _num_outputs = id.num_outputs; _converter = uhd::convert::get_converter(id)(); this->set_scale_factor(1/32767.); //update after setting converter _bytes_per_otw_item = uhd::convert::get_bytes_per_item(id.input_format); @@ -207,7 +223,7 @@ private: handle_overflow_type handle_overflow; }; std::vector<xport_chan_props_type> _props; - std::vector<void *> _io_buffs; //used in conversion + size_t _num_outputs; size_t _bytes_per_otw_item; //used in conversion size_t _bytes_per_cpu_item; //used in conversion uhd::convert::converter::sptr _converter; //used in conversion @@ -512,24 +528,19 @@ private: //extract the number of samples available to copy const size_t nsamps_available = info.data_bytes_to_copy/_bytes_per_otw_item; - const size_t nsamps_to_copy = std::min(nsamps_per_buff*_io_buffs.size(), nsamps_available); + const size_t nsamps_to_copy = std::min(nsamps_per_buff*_num_outputs, nsamps_available); const size_t bytes_to_copy = nsamps_to_copy*_bytes_per_otw_item; - const size_t nsamps_to_copy_per_io_buff = nsamps_to_copy/_io_buffs.size(); + const size_t nsamps_to_copy_per_io_buff = nsamps_to_copy/_num_outputs; - size_t buff_index = 0; - BOOST_FOREACH(per_buffer_info_type &buff_info, info){ + //setup the data to share with converter threads + _convert_nsamps = nsamps_to_copy_per_io_buff; + _convert_buffs = &buffs; + _convert_buffer_offset_bytes = buffer_offset_bytes; + _convert_bytes_to_copy = bytes_to_copy; - //fill a vector with pointers to the io buffers - BOOST_FOREACH(void *&io_buff, _io_buffs){ - io_buff = reinterpret_cast<char *>(buffs[buff_index++]) + buffer_offset_bytes; - } + //perform N channels of conversion + converter_thread_task(0); - //copy-convert the samples from the recv buffer - _converter->conv(buff_info.copy_buff, _io_buffs, nsamps_to_copy_per_io_buff); - - //update the rx copy buffer to reflect the bytes copied - buff_info.copy_buff += bytes_to_copy; - } //update the copy buffer's availability info.data_bytes_to_copy -= bytes_to_copy; @@ -538,15 +549,53 @@ private: metadata.fragment_offset = info.fragment_offset_in_samps; info.fragment_offset_in_samps += nsamps_to_copy; //set for next call - //done with buffers? this action releases buffers in-order - if (not metadata.more_fragments){ - BOOST_FOREACH(per_buffer_info_type &buff_info, info){ - buff_info.buff.reset(); //effectively a release - } + return nsamps_to_copy_per_io_buff; + } + + /******************************************************************* + * Perform one thread's work of the conversion task. + * The entry and exit use a dual synchronization barrier, + * to wait for data to become ready and block until completion. + ******************************************************************/ + UHD_INLINE void converter_thread_task(const size_t index) + { + _task_barrier_entry.wait(); + + //shortcut references to local data structures + buffers_info_type &buff_info = get_curr_buffer_info(); + per_buffer_info_type &info = buff_info[index]; + const rx_streamer::buffs_type &buffs = *_convert_buffs; + + //fill IO buffs with pointers into the output buffer + void *io_buffs[4/*max interleave*/]; + for (size_t i = 0; i < _num_outputs; i++){ + char *b = reinterpret_cast<char *>(buffs[index*_num_outputs + i]); + io_buffs[i] = b + _convert_buffer_offset_bytes; } + const ref_vector<void *> out_buffs(io_buffs, _num_outputs); - return nsamps_to_copy_per_io_buff; + //perform the conversion operation + _converter->conv(info.copy_buff, out_buffs, _convert_nsamps); + + //advance the pointer for the source buffer + info.copy_buff += _convert_bytes_to_copy; + + //release the buffer if fully consumed + if (buff_info.data_bytes_to_copy == _convert_bytes_to_copy){ + info.buff.reset(); //effectively a release + } + + _task_barrier_exit.wait(); } + + //! Shared variables for the worker threads + reusable_barrier _task_barrier_entry, _task_barrier_exit; + std::vector<task::sptr> _task_handlers; + size_t _convert_nsamps; + const rx_streamer::buffs_type *_convert_buffs; + size_t _convert_buffer_offset_bytes; + size_t _convert_bytes_to_copy; + }; class recv_packet_streamer : public recv_packet_handler, public rx_streamer{ diff --git a/host/lib/transport/super_send_packet_handler.hpp b/host/lib/transport/super_send_packet_handler.hpp index 02cfad80f..8f943effb 100644 --- a/host/lib/transport/super_send_packet_handler.hpp +++ b/host/lib/transport/super_send_packet_handler.hpp @@ -23,6 +23,8 @@ #include <uhd/convert.hpp> #include <uhd/stream.hpp> #include <uhd/utils/msg.hpp> +#include <uhd/utils/tasks.hpp> +#include <uhd/utils/atomic.hpp> #include <uhd/utils/byteswap.hpp> #include <uhd/types/metadata.hpp> #include <uhd/transport/vrt_if_packet.hpp> @@ -58,12 +60,23 @@ public: this->resize(size); } + ~send_packet_handler(void){ + _task_handlers.clear(); + } + //! Resize the number of transport channels void resize(const size_t size){ if (this->size() == size) return; + _task_handlers.clear(); _props.resize(size); static const boost::uint64_t zero = 0; _zero_buffs.resize(size, &zero); + _task_barrier_entry.resize(size); + _task_barrier_exit.resize(size); + _task_handlers.resize(size); + for (size_t i = 1/*skip 0*/; i < size; i++){ + _task_handlers[i] = task::make(boost::bind(&send_packet_handler::converter_thread_task, this, i)); + }; } //! Get the channel width of this handler @@ -104,7 +117,7 @@ public: //! Set the conversion routine for all channels void set_converter(const uhd::convert::id_type &id){ - _io_buffs.resize(id.num_inputs); + _num_inputs = id.num_inputs; _converter = uhd::convert::get_converter(id)(); this->set_scale_factor(32767.); //update after setting converter _bytes_per_otw_item = uhd::convert::get_bytes_per_item(id.output_format); @@ -205,9 +218,10 @@ private: get_buff_type get_buff; bool has_sid; boost::uint32_t sid; + managed_send_buffer::sptr buff; }; std::vector<xport_chan_props_type> _props; - std::vector<const void *> _io_buffs; //used in conversion + size_t _num_inputs; size_t _bytes_per_otw_item; //used in conversion size_t _bytes_per_cpu_item; //used in conversion uhd::convert::converter::sptr _converter; //used in conversion @@ -226,39 +240,77 @@ private: const size_t buffer_offset_bytes = 0 ){ //load the rest of the if_packet_info in here - if_packet_info.num_payload_bytes = nsamps_per_buff*_io_buffs.size()*_bytes_per_otw_item; + if_packet_info.num_payload_bytes = nsamps_per_buff*_num_inputs*_bytes_per_otw_item; if_packet_info.num_payload_words32 = (if_packet_info.num_payload_bytes + 3/*round up*/)/sizeof(boost::uint32_t); if_packet_info.packet_count = _next_packet_seq; - size_t buff_index = 0; + //get a buffer for each channel or timeout BOOST_FOREACH(xport_chan_props_type &props, _props){ - managed_send_buffer::sptr buff = props.get_buff(timeout); - if (buff.get() == NULL) return 0; //timeout - - //fill a vector with pointers to the io buffers - BOOST_FOREACH(const void *&io_buff, _io_buffs){ - io_buff = reinterpret_cast<const char *>(buffs[buff_index++]) + buffer_offset_bytes; - } - boost::uint32_t *otw_mem = buff->cast<boost::uint32_t *>() + _header_offset_words32; - - //pack metadata into a vrt header - if_packet_info.has_sid = props.has_sid; - if_packet_info.sid = props.sid; - _vrt_packer(otw_mem, if_packet_info); - otw_mem += if_packet_info.num_header_words32; + if (not props.buff) props.buff = props.get_buff(timeout); + if (not props.buff) return 0; //timeout + } - //copy-convert the samples into the send buffer - _converter->conv(_io_buffs, otw_mem, nsamps_per_buff); + //setup the data to share with converter threads + _convert_nsamps = nsamps_per_buff; + _convert_buffs = &buffs; + _convert_buffer_offset_bytes = buffer_offset_bytes; + _convert_if_packet_info = &if_packet_info; - //commit the samples to the zero-copy interface - size_t num_bytes_total = (_header_offset_words32+if_packet_info.num_packet_words32)*sizeof(boost::uint32_t); - buff->commit(num_bytes_total); - buff.reset(); //effectively a release + //perform N channels of conversion + converter_thread_task(0); - } _next_packet_seq++; //increment sequence after commits return nsamps_per_buff; } + + /******************************************************************* + * Perform one thread's work of the conversion task. + * The entry and exit use a dual synchronization barrier, + * to wait for data to become ready and block until completion. + ******************************************************************/ + UHD_INLINE void converter_thread_task(const size_t index) + { + _task_barrier_entry.wait(); + + //shortcut references to local data structures + managed_send_buffer::sptr &buff = _props[index].buff; + vrt::if_packet_info_t if_packet_info = *_convert_if_packet_info; + const tx_streamer::buffs_type &buffs = *_convert_buffs; + + //fill IO buffs with pointers into the output buffer + const void *io_buffs[4/*max interleave*/]; + for (size_t i = 0; i < _num_inputs; i++){ + const char *b = reinterpret_cast<const char *>(buffs[index*_num_inputs + i]); + io_buffs[i] = b + _convert_buffer_offset_bytes; + } + const ref_vector<const void *> in_buffs(io_buffs, _num_inputs); + + //pack metadata into a vrt header + boost::uint32_t *otw_mem = buff->cast<boost::uint32_t *>() + _header_offset_words32; + if_packet_info.has_sid = _props[index].has_sid; + if_packet_info.sid = _props[index].sid; + _vrt_packer(otw_mem, if_packet_info); + otw_mem += if_packet_info.num_header_words32; + + //perform the conversion operation + _converter->conv(in_buffs, otw_mem, _convert_nsamps); + + //commit the samples to the zero-copy interface + const size_t num_vita_words32 = _header_offset_words32+if_packet_info.num_packet_words32; + buff->commit(num_vita_words32*sizeof(boost::uint32_t)); + buff.reset(); //effectively a release + + _task_barrier_exit.wait(); + } + + //! Shared variables for the worker threads + reusable_barrier _task_barrier_entry, _task_barrier_exit; + std::vector<task::sptr> _task_handlers; + size_t _convert_nsamps; + const tx_streamer::buffs_type *_convert_buffs; + size_t _convert_buffer_offset_bytes; + vrt::if_packet_info_t *_convert_if_packet_info; + }; class send_packet_streamer : public send_packet_handler, public tx_streamer{ diff --git a/host/lib/transport/udp_zero_copy.cpp b/host/lib/transport/udp_zero_copy.cpp index 9765c19c0..9125be53a 100644 --- a/host/lib/transport/udp_zero_copy.cpp +++ b/host/lib/transport/udp_zero_copy.cpp @@ -16,12 +16,12 @@ // #include "udp_common.hpp" -#include "simple_claimer.hpp" #include <uhd/transport/udp_zero_copy.hpp> #include <uhd/transport/udp_simple.hpp> //mtu #include <uhd/transport/buffer_pool.hpp> #include <uhd/utils/msg.hpp> #include <uhd/utils/log.hpp> +#include <uhd/utils/atomic.hpp> #include <boost/format.hpp> #include <boost/make_shared.hpp> #include <vector> diff --git a/host/lib/transport/usb_zero_copy_wrapper.cpp b/host/lib/transport/usb_zero_copy_wrapper.cpp index d59ea36ff..d04244ca9 100644 --- a/host/lib/transport/usb_zero_copy_wrapper.cpp +++ b/host/lib/transport/usb_zero_copy_wrapper.cpp @@ -15,12 +15,12 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -#include "simple_claimer.hpp" #include <uhd/transport/usb_zero_copy.hpp> #include <uhd/transport/buffer_pool.hpp> #include <uhd/utils/byteswap.hpp> #include <uhd/utils/msg.hpp> #include <uhd/utils/tasks.hpp> +#include <uhd/utils/atomic.hpp> #include <boost/foreach.hpp> #include <boost/make_shared.hpp> #include <boost/thread/mutex.hpp> @@ -29,6 +29,7 @@ #include <vector> #include <iostream> +using namespace uhd; using namespace uhd::transport; static const boost::posix_time::time_duration AUTOFLUSH_TIMEOUT(boost::posix_time::milliseconds(1)); diff --git a/host/lib/types/ranges.cpp b/host/lib/types/ranges.cpp index 6e39bc688..82a9a84e1 100644 --- a/host/lib/types/ranges.cpp +++ b/host/lib/types/ranges.cpp @@ -1,5 +1,5 @@ // -// Copyright 2011-2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -27,17 +27,8 @@ using namespace uhd; /*********************************************************************** * range_t implementation code **********************************************************************/ -struct range_t::impl{ - impl(double start, double stop, double step): - start(start), stop(stop), step(step) - { - /* NOP */ - } - double start, stop, step; -}; - range_t::range_t(double value): - _impl(UHD_PIMPL_MAKE(impl, (value, value, 0))) + _start(value), _stop(value), _step(0.0) { /* NOP */ } @@ -45,7 +36,7 @@ range_t::range_t(double value): range_t::range_t( double start, double stop, double step ): - _impl(UHD_PIMPL_MAKE(impl, (start, stop, step))) + _start(start), _stop(stop), _step(step) { if (stop < start){ throw uhd::value_error("cannot make range where stop < start"); @@ -53,15 +44,15 @@ range_t::range_t( } double range_t::start(void) const{ - return _impl->start; + return _start; } double range_t::stop(void) const{ - return _impl->stop; + return _stop; } double range_t::step(void) const{ - return _impl->step; + return _step; } const std::string range_t::to_pp_string(void) const{ diff --git a/host/lib/usrp/b100/CMakeLists.txt b/host/lib/usrp/b100/CMakeLists.txt index 1237f52d1..d2c33b512 100644 --- a/host/lib/usrp/b100/CMakeLists.txt +++ b/host/lib/usrp/b100/CMakeLists.txt @@ -1,5 +1,5 @@ # -# Copyright 2011 Ettus Research LLC +# Copyright 2011-2012 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -26,7 +26,6 @@ LIBUHD_REGISTER_COMPONENT("B100" ENABLE_B100 ON "ENABLE_LIBUHD;ENABLE_USB" OFF) IF(ENABLE_B100) LIBUHD_APPEND_SOURCES( - ${CMAKE_CURRENT_SOURCE_DIR}/b100_ctrl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/b100_impl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/clock_ctrl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/codec_ctrl.cpp diff --git a/host/lib/usrp/b100/b100_ctrl.cpp b/host/lib/usrp/b100/b100_ctrl.cpp deleted file mode 100644 index e6136c00e..000000000 --- a/host/lib/usrp/b100/b100_ctrl.cpp +++ /dev/null @@ -1,257 +0,0 @@ -// -// Copyright 2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#include "b100_ctrl.hpp" -#include <uhd/transport/bounded_buffer.hpp> -#include <uhd/transport/usb_zero_copy.hpp> -#include <uhd/transport/zero_copy.hpp> -#include <uhd/transport/vrt_if_packet.hpp> -#include <uhd/utils/thread_priority.hpp> -#include <uhd/utils/msg.hpp> -#include <uhd/utils/tasks.hpp> -#include <uhd/types/metadata.hpp> -#include <uhd/types/serial.hpp> -#include "ctrl_packet.hpp" -#include <boost/thread/thread.hpp> -#include <boost/bind.hpp> -#include <uhd/exception.hpp> - -using namespace uhd::transport; -using namespace uhd; - -bool b100_ctrl_debug = false; - -class b100_ctrl_impl : public b100_ctrl { -public: - b100_ctrl_impl(uhd::transport::zero_copy_if::sptr ctrl_transport): - sync_ctrl_fifo(2), - _ctrl_transport(ctrl_transport), - _seq(0) - { - viking_marauder = task::make(boost::bind(&b100_ctrl_impl::viking_marauder_loop, this)); - } - - ~b100_ctrl_impl(void){ - //stop the marauder first so it cant access deconstructed objects - viking_marauder.reset(); - } - - int write(boost::uint32_t addr, const ctrl_data_t &data); - ctrl_data_t read(boost::uint32_t addr, size_t len); - - bool get_ctrl_data(ctrl_data_t &pkt_data, double timeout); - - void poke32(wb_addr_type addr, boost::uint32_t data){ - boost::mutex::scoped_lock lock(_ctrl_mutex); - - ctrl_data_t words(2); - words[0] = data & 0x0000FFFF; - words[1] = data >> 16; - this->write(addr, words); - } - - boost::uint32_t peek32(wb_addr_type addr){ - boost::mutex::scoped_lock lock(_ctrl_mutex); - - ctrl_data_t words = this->read(addr, 2); - return boost::uint32_t((boost::uint32_t(words[1]) << 16) | words[0]); - } - - void poke16(wb_addr_type addr, boost::uint16_t data){ - boost::mutex::scoped_lock lock(_ctrl_mutex); - - ctrl_data_t words(1); - words[0] = data; - this->write(addr, words); - } - - boost::uint16_t peek16(wb_addr_type addr){ - boost::mutex::scoped_lock lock(_ctrl_mutex); - - ctrl_data_t words = this->read(addr, 1); - return boost::uint16_t(words[0]); - } - - void set_async_cb(const async_cb_type &async_cb){ - boost::mutex::scoped_lock lock(_async_mutex); - _async_cb = async_cb; - } - -private: - int send_pkt(boost::uint16_t *cmd); - - //änd hërë wë gö ä-Vïkïng för äsynchronous control packets - void viking_marauder_loop(void); - bounded_buffer<ctrl_data_t> sync_ctrl_fifo; - async_cb_type _async_cb; - task::sptr viking_marauder; - - uhd::transport::zero_copy_if::sptr _ctrl_transport; - boost::uint8_t _seq; - boost::mutex _ctrl_mutex, _async_mutex; -}; - -/*********************************************************************** - * helper functions for packing/unpacking control packets - **********************************************************************/ -void pack_ctrl_pkt(boost::uint16_t *pkt_buff, - const ctrl_pkt_t &pkt){ - //first two bits are OP - //next six bits are CALLBACKS - //next 8 bits are SEQUENCE - //next 16 bits are LENGTH (16-bit word) - //next 32 bits are ADDRESS (16-bit word LSW) - //then DATA (28 16-bit words) - pkt_buff[0] = (boost::uint16_t(pkt.pkt_meta.op) << 14) | (boost::uint16_t(pkt.pkt_meta.callbacks) << 8) | pkt.pkt_meta.seq; - pkt_buff[1] = pkt.pkt_meta.len; - pkt_buff[2] = (pkt.pkt_meta.addr & 0x00000FFF); - pkt_buff[3] = 0x0000; //address high bits always 0 on this device - - for(size_t i = 0; i < pkt.data.size(); i++) { - pkt_buff[4+i] = pkt.data[i]; - } -} - -void unpack_ctrl_pkt(const boost::uint16_t *pkt_buff, - ctrl_pkt_t &pkt){ - pkt.pkt_meta.seq = pkt_buff[0] & 0xFF; - pkt.pkt_meta.op = CTRL_PKT_OP_READ; //really this is useless - pkt.pkt_meta.len = pkt_buff[1]; - pkt.pkt_meta.callbacks = 0; //callbacks aren't implemented yet - pkt.pkt_meta.addr = pkt_buff[2] | boost::uint32_t(pkt_buff[3] << 16); - - //let's check this so we don't go pushing 64K of crap onto the pkt - if(pkt.pkt_meta.len > CTRL_PACKET_DATA_LENGTH) { - throw uhd::runtime_error("Received control packet too long"); - } - - for(int i = 4; i < 4+pkt.pkt_meta.len; i++) pkt.data.push_back(pkt_buff[i]); -} - -int b100_ctrl_impl::send_pkt(boost::uint16_t *cmd) { - managed_send_buffer::sptr sbuf = _ctrl_transport->get_send_buff(); - if(!sbuf.get()) { - throw uhd::runtime_error("Control channel send error"); - } - - //FIXME there's a better way to do this - for(size_t i = 0; i < (CTRL_PACKET_LENGTH / sizeof(boost::uint16_t)); i++) { - sbuf->cast<boost::uint16_t *>()[i] = cmd[i]; - } - sbuf->commit(CTRL_PACKET_LENGTH); //fixed size transaction - return 0; -} - -int b100_ctrl_impl::write(boost::uint32_t addr, const ctrl_data_t &data) { - UHD_ASSERT_THROW(data.size() <= (CTRL_PACKET_DATA_LENGTH / sizeof(boost::uint16_t))); - ctrl_pkt_t pkt; - pkt.data = data; - pkt.pkt_meta.op = CTRL_PKT_OP_WRITE; - pkt.pkt_meta.callbacks = 0; - pkt.pkt_meta.seq = _seq++; - pkt.pkt_meta.len = pkt.data.size(); - pkt.pkt_meta.addr = addr; - boost::uint16_t pkt_buff[CTRL_PACKET_LENGTH / sizeof(boost::uint16_t)] = {}; - - pack_ctrl_pkt(pkt_buff, pkt); - size_t result = send_pkt(pkt_buff); - return result; -} - -ctrl_data_t b100_ctrl_impl::read(boost::uint32_t addr, size_t len) { - UHD_ASSERT_THROW(len <= (CTRL_PACKET_DATA_LENGTH / sizeof(boost::uint16_t))); - - ctrl_pkt_t pkt; - pkt.pkt_meta.op = CTRL_PKT_OP_READ; - pkt.pkt_meta.callbacks = 0; - pkt.pkt_meta.seq = _seq++; - pkt.pkt_meta.len = len; - pkt.pkt_meta.addr = addr; - boost::uint16_t pkt_buff[CTRL_PACKET_LENGTH / sizeof(boost::uint16_t)] = {}; - - //flush anything that might be in the queue - while (get_ctrl_data(pkt.data, 0.0)){ - UHD_MSG(error) << "B100: control read found unexpected packet." << std::endl; - } - - pack_ctrl_pkt(pkt_buff, pkt); - send_pkt(pkt_buff); - - //block with timeout waiting for the response to appear - if (not get_ctrl_data(pkt.data, 0.1)) throw uhd::runtime_error( - "B100: timeout waiting for control response packet." - ); - - return pkt.data; -} - -/*********************************************************************** - * Viking marauders go pillaging for asynchronous control packets in the - * control response endpoint. Sync packets go in sync_ctrl_fifo, - * async TX error messages go in async_msg_fifo. sync_ctrl_fifo should - * never have more than 1 message in it, since it's expected that we'll - * wait for a control operation to finish before starting another one. - **********************************************************************/ -void b100_ctrl_impl::viking_marauder_loop(void){ - set_thread_priority_safe(); - - while (not boost::this_thread::interruption_requested()){ - managed_recv_buffer::sptr rbuf = _ctrl_transport->get_recv_buff(1.0); - if(rbuf.get() == NULL) continue; //that's ok, there are plenty of villages to pillage! - const boost::uint16_t *pkt_buf = rbuf->cast<const boost::uint16_t *>(); - - if(pkt_buf[0] >> 8 == CTRL_PACKET_HEADER_MAGIC) { - //so it's got a control packet header, let's parse it. - ctrl_pkt_t pkt; - unpack_ctrl_pkt(pkt_buf, pkt); - - if(pkt.pkt_meta.seq != boost::uint8_t(_seq - 1)) { - UHD_MSG(error) - << "Sequence error on control channel." << std::endl - << "Exiting control loop." << std::endl - ; - return; - } - if(pkt.pkt_meta.len > (CTRL_PACKET_LENGTH - CTRL_PACKET_HEADER_LENGTH)) { - UHD_MSG(error) - << "Control channel packet length too long" << std::endl - << "Exiting control loop." << std::endl - ; - return; - } - - //push it onto the queue - sync_ctrl_fifo.push_with_pop_on_full(pkt.data); - } - else{ //otherwise let the async callback handle it - boost::mutex::scoped_lock lock(_async_mutex); - if (not _async_cb.empty()) _async_cb(rbuf); - } - } -} - -bool b100_ctrl_impl::get_ctrl_data(ctrl_data_t &pkt_data, double timeout){ - boost::this_thread::disable_interruption di; //disable because the wait can throw - return sync_ctrl_fifo.pop_with_timed_wait(pkt_data, timeout); -} - -/*********************************************************************** - * Public make function for b100_ctrl interface - **********************************************************************/ -b100_ctrl::sptr b100_ctrl::make(uhd::transport::zero_copy_if::sptr ctrl_transport){ - return sptr(new b100_ctrl_impl(ctrl_transport)); -} diff --git a/host/lib/usrp/b100/b100_ctrl.hpp b/host/lib/usrp/b100/b100_ctrl.hpp deleted file mode 100644 index 74884d525..000000000 --- a/host/lib/usrp/b100/b100_ctrl.hpp +++ /dev/null @@ -1,70 +0,0 @@ -// -// Copyright 2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#ifndef INCLUDED_B100_CTRL_HPP -#define INCLUDED_B100_CTRL_HPP - -#include "wb_iface.hpp" -#include <uhd/transport/usb_zero_copy.hpp> -#include <uhd/types/serial.hpp> -#include <boost/shared_ptr.hpp> -#include <boost/utility.hpp> -#include "ctrl_packet.hpp" -#include <boost/function.hpp> - -class b100_ctrl : boost::noncopyable, public wb_iface{ -public: - typedef boost::shared_ptr<b100_ctrl> sptr; - typedef boost::function<void(uhd::transport::managed_recv_buffer::sptr)> async_cb_type; - - /*! - * Make a USRP control object from a data transport - * \param ctrl_transport a USB data transport - * \return a new b100 control object - */ - static sptr make(uhd::transport::zero_copy_if::sptr ctrl_transport); - - //! set an async callback for messages - virtual void set_async_cb(const async_cb_type &async_cb) = 0; - - /*! - * Write a byte vector to an FPGA register - * \param addr the FPGA register address - * \param bytes the data to write - * \return 0 on success, error code on failure - */ - virtual int write(boost::uint32_t addr, const ctrl_data_t &data) = 0; - - /*! - * Read a byte vector from an FPGA register (blocking read) - * \param addr the FPGA register address - * \param len the length of the read - * \return a vector of bytes from the register(s) in question - */ - virtual ctrl_data_t read(boost::uint32_t addr, size_t len) = 0; - - /*! - * Get a sync ctrl packet (blocking) - * \param the packet data buffer - * \param the timeout value - * \return true if it got something - */ - virtual bool get_ctrl_data(ctrl_data_t &pkt_data, double timeout) = 0; - -}; - -#endif /* INCLUDED_B100_CTRL_HPP */ diff --git a/host/lib/usrp/b100/b100_impl.cpp b/host/lib/usrp/b100/b100_impl.cpp index eec777842..b226e113a 100644 --- a/host/lib/usrp/b100/b100_impl.cpp +++ b/host/lib/usrp/b100/b100_impl.cpp @@ -17,12 +17,11 @@ #include "apply_corrections.hpp" #include "b100_impl.hpp" -#include "b100_ctrl.hpp" +#include "b100_regs.hpp" #include "fpga_regs_standard.h" #include "usrp_i2c_addr.h" #include "usrp_commands.h" #include <uhd/transport/usb_control.hpp> -#include "ctrl_packet.hpp" #include <uhd/utils/msg.hpp> #include <uhd/exception.hpp> #include <uhd/utils/static.hpp> @@ -33,7 +32,6 @@ #include <boost/filesystem.hpp> #include <boost/thread/thread.hpp> #include <boost/lexical_cast.hpp> -#include "b100_regs.hpp" #include <cstdio> #include <iostream> @@ -188,10 +186,10 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ //create the control transport device_addr_t ctrl_xport_args; - ctrl_xport_args["recv_frame_size"] = boost::lexical_cast<std::string>(CTRL_PACKET_LENGTH); + ctrl_xport_args["recv_frame_size"] = "512"; ctrl_xport_args["num_recv_frames"] = "16"; - ctrl_xport_args["send_frame_size"] = boost::lexical_cast<std::string>(CTRL_PACKET_LENGTH); - ctrl_xport_args["num_send_frames"] = "4"; + ctrl_xport_args["send_frame_size"] = "512"; + ctrl_xport_args["num_send_frames"] = "16"; _ctrl_transport = usb_zero_copy::make( handle, @@ -199,17 +197,22 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ 3, 4, //interface, endpoint ctrl_xport_args ); - while (_ctrl_transport->get_recv_buff(0.0)){} //flush ctrl xport this->enable_gpif(true); //////////////////////////////////////////////////////////////////// - // Initialize FPGA wishbone communication + // Initialize FPGA control communication //////////////////////////////////////////////////////////////////// - _fpga_ctrl = b100_ctrl::make(_ctrl_transport); - _fpga_ctrl->poke32(B100_REG_GLOBAL_RESET, 0); //global fpga reset + fifo_ctrl_excelsior_config fifo_ctrl_config; + fifo_ctrl_config.async_sid_base = B100_TX_ASYNC_SID; + fifo_ctrl_config.num_async_chan = 1; + fifo_ctrl_config.ctrl_sid_base = B100_CTRL_MSG_SID; + fifo_ctrl_config.spi_base = TOREG(SR_SPI); + fifo_ctrl_config.spi_rb = REG_RB_SPI; + _fifo_ctrl = fifo_ctrl_excelsior::make(_ctrl_transport, fifo_ctrl_config); + //perform a test peek operation try{ - _fpga_ctrl->peek32(0); + _fifo_ctrl->peek32(0); } //try reset once in the case of failure catch(const uhd::exception &){ @@ -217,7 +220,7 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ UHD_MSG(warning) << "The control endpoint was left in a bad state.\n" "Attempting endpoint re-enumeration...\n" << std::endl; - _fpga_ctrl.reset(); + _fifo_ctrl.reset(); _ctrl_transport.reset(); _fx2_ctrl->usrp_fx2_reset(); goto b100_impl_constructor_begin; @@ -227,8 +230,7 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ //////////////////////////////////////////////////////////////////// // Initialize peripherals after reset //////////////////////////////////////////////////////////////////// - _fpga_i2c_ctrl = i2c_core_100::make(_fpga_ctrl, B100_REG_SLAVE(3)); - _fpga_spi_ctrl = spi_core_100::make(_fpga_ctrl, B100_REG_SLAVE(2)); + _fpga_i2c_ctrl = i2c_core_200::make(_fifo_ctrl, TOREG(SR_I2C), REG_RB_I2C); //////////////////////////////////////////////////////////////////// // Create data transport @@ -242,6 +244,10 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ data_xport_args["send_frame_size"] = device_addr.get("send_frame_size", "16384"); data_xport_args["num_send_frames"] = device_addr.get("num_send_frames", "16"); + //let packet padder know the LUT size in number of words32 + const size_t rx_lut_size = size_t(data_xport_args.cast<double>("recv_frame_size", 0.0)); + _fifo_ctrl->poke32(TOREG(SR_PADDER+0), rx_lut_size/sizeof(boost::uint32_t)); + _data_transport = usb_zero_copy::make_wrapper( usb_zero_copy::make( handle, // identifier @@ -251,7 +257,6 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ ), B100_MAX_PKT_BYTE_LIMIT ); - while (_data_transport->get_recv_buff(0.0)){} //flush data xport //////////////////////////////////////////////////////////////////// // Initialize the properties tree @@ -277,12 +282,17 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ //^^^ clock created up top, just reg props here... ^^^ _tree->create<double>(mb_path / "tick_rate") .publish(boost::bind(&b100_clock_ctrl::get_fpga_clock_rate, _clock_ctrl)) + .subscribe(boost::bind(&fifo_ctrl_excelsior::set_tick_rate, _fifo_ctrl, _1)) .subscribe(boost::bind(&b100_impl::update_tick_rate, this, _1)); + //subscribe the command time while we are at it + _tree->create<time_spec_t>(mb_path / "time/cmd") + .subscribe(boost::bind(&fifo_ctrl_excelsior::set_time, _fifo_ctrl, _1)); + //////////////////////////////////////////////////////////////////// // create codec control objects //////////////////////////////////////////////////////////////////// - _codec_ctrl = b100_codec_ctrl::make(_fpga_spi_ctrl); + _codec_ctrl = b100_codec_ctrl::make(_fifo_ctrl); const fs_path rx_codec_path = mb_path / "rx_codecs/A"; const fs_path tx_codec_path = mb_path / "tx_codecs/A"; _tree->create<std::string>(rx_codec_path / "name").set("ad9522"); @@ -304,8 +314,8 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ //////////////////////////////////////////////////////////////////// // create frontend control objects //////////////////////////////////////////////////////////////////// - _rx_fe = rx_frontend_core_200::make(_fpga_ctrl, B100_REG_SR_ADDR(B100_SR_RX_FRONT)); - _tx_fe = tx_frontend_core_200::make(_fpga_ctrl, B100_REG_SR_ADDR(B100_SR_TX_FRONT)); + _rx_fe = rx_frontend_core_200::make(_fifo_ctrl, TOREG(SR_RX_FE)); + _tx_fe = tx_frontend_core_200::make(_fifo_ctrl, TOREG(SR_TX_FE)); _tree->create<subdev_spec_t>(mb_path / "rx_subdev_spec") .subscribe(boost::bind(&b100_impl::update_rx_subdev_spec, this, _1)); @@ -334,13 +344,17 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ //////////////////////////////////////////////////////////////////// // create rx dsp control objects //////////////////////////////////////////////////////////////////// - _rx_dsps.push_back(rx_dsp_core_200::make( - _fpga_ctrl, B100_REG_SR_ADDR(B100_SR_RX_DSP0), B100_REG_SR_ADDR(B100_SR_RX_CTRL0), B100_RX_SID_BASE + 0 - )); - _rx_dsps.push_back(rx_dsp_core_200::make( - _fpga_ctrl, B100_REG_SR_ADDR(B100_SR_RX_DSP1), B100_REG_SR_ADDR(B100_SR_RX_CTRL1), B100_RX_SID_BASE + 1 - )); - for (size_t dspno = 0; dspno < _rx_dsps.size(); dspno++){ + const size_t num_rx_dsps = _fifo_ctrl->peek32(REG_RB_NUM_RX_DSP); + for (size_t dspno = 0; dspno < num_rx_dsps; dspno++) + { + const size_t sr_off = dspno*32; + _rx_dsps.push_back(rx_dsp_core_200::make( + _fifo_ctrl, + TOREG(SR_RX_DSP0+sr_off), + TOREG(SR_RX_CTRL0+sr_off), + B100_RX_SID_BASE + dspno + )); + _rx_dsps[dspno]->set_link_rate(B100_LINK_RATE_BPS); _tree->access<double>(mb_path / "tick_rate") .subscribe(boost::bind(&rx_dsp_core_200::set_tick_rate, _rx_dsps[dspno], _1)); @@ -363,7 +377,7 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ // create tx dsp control objects //////////////////////////////////////////////////////////////////// _tx_dsp = tx_dsp_core_200::make( - _fpga_ctrl, B100_REG_SR_ADDR(B100_SR_TX_DSP), B100_REG_SR_ADDR(B100_SR_TX_CTRL), B100_TX_ASYNC_SID + _fifo_ctrl, TOREG(SR_TX_DSP), TOREG(SR_TX_CTRL), B100_TX_ASYNC_SID ); _tx_dsp->set_link_rate(B100_LINK_RATE_BPS); _tree->access<double>(mb_path / "tick_rate") @@ -383,12 +397,12 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ // create time control objects //////////////////////////////////////////////////////////////////// time64_core_200::readback_bases_type time64_rb_bases; - time64_rb_bases.rb_hi_now = B100_REG_RB_TIME_NOW_HI; - time64_rb_bases.rb_lo_now = B100_REG_RB_TIME_NOW_LO; - time64_rb_bases.rb_hi_pps = B100_REG_RB_TIME_PPS_HI; - time64_rb_bases.rb_lo_pps = B100_REG_RB_TIME_PPS_LO; + time64_rb_bases.rb_hi_now = REG_RB_TIME_NOW_HI; + time64_rb_bases.rb_lo_now = REG_RB_TIME_NOW_LO; + time64_rb_bases.rb_hi_pps = REG_RB_TIME_PPS_HI; + time64_rb_bases.rb_lo_pps = REG_RB_TIME_PPS_LO; _time64 = time64_core_200::make( - _fpga_ctrl, B100_REG_SR_ADDR(B100_SR_TIME64), time64_rb_bases + _fifo_ctrl, TOREG(SR_TIME64), time64_rb_bases ); _tree->access<double>(mb_path / "tick_rate") .subscribe(boost::bind(&time64_core_200::set_tick_rate, _time64, _1)); @@ -412,7 +426,7 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ //////////////////////////////////////////////////////////////////// // create user-defined control objects //////////////////////////////////////////////////////////////////// - _user = user_settings_core_200::make(_fpga_ctrl, B100_REG_SR_ADDR(B100_SR_USER_REGS)); + _user = user_settings_core_200::make(_fifo_ctrl, TOREG(SR_USER_REGS)); _tree->create<user_settings_core_200::user_reg_t>(mb_path / "user/regs") .subscribe(boost::bind(&user_settings_core_200::set_reg, _user, _1)); @@ -438,7 +452,7 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ .subscribe(boost::bind(&b100_impl::set_db_eeprom, this, "gdb", _1)); //create a new dboard interface and manager - _dboard_iface = make_b100_dboard_iface(_fpga_ctrl, _fpga_i2c_ctrl, _fpga_spi_ctrl, _clock_ctrl, _codec_ctrl); + _dboard_iface = make_b100_dboard_iface(_fifo_ctrl, _fpga_i2c_ctrl, _fifo_ctrl/*spi*/, _clock_ctrl, _codec_ctrl); _tree->create<dboard_iface::sptr>(mb_path / "dboards/A/iface").set(_dboard_iface); _dboard_manager = dboard_manager::make( rx_db_eeprom.id, tx_db_eeprom.id, gdb_eeprom.id, @@ -458,7 +472,11 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ } //initialize io handling - this->io_init(); + _recv_demuxer = recv_packet_demuxer::make(_data_transport, _rx_dsps.size(), B100_RX_SID_BASE); + + //allocate streamer weak ptrs containers + _rx_streamers.resize(_rx_dsps.size()); + _tx_streamers.resize(1/*known to be 1 dsp*/); //////////////////////////////////////////////////////////////////// // do some post-init tasks @@ -483,8 +501,7 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ } b100_impl::~b100_impl(void){ - //set an empty async callback now that we deconstruct - _fpga_ctrl->set_async_cb(b100_ctrl::async_cb_type()); + //NOP } void b100_impl::check_fw_compat(void){ @@ -502,7 +519,7 @@ void b100_impl::check_fw_compat(void){ } void b100_impl::check_fpga_compat(void){ - const boost::uint32_t fpga_compat_num = _fpga_ctrl->peek32(B100_REG_RB_COMPAT); + const boost::uint32_t fpga_compat_num = _fifo_ctrl->peek32(REG_RB_COMPAT); boost::uint16_t fpga_major = fpga_compat_num >> 16, fpga_minor = fpga_compat_num & 0xffff; if (fpga_major == 0){ //old version scheme fpga_major = fpga_minor; @@ -537,6 +554,19 @@ void b100_impl::set_db_eeprom(const std::string &type, const uhd::usrp::dboard_e } void b100_impl::update_clock_source(const std::string &source){ + + if (source == "pps_sync"){ + _clock_ctrl->use_external_ref(); + _fifo_ctrl->poke32(TOREG(SR_MISC+2), 1); + return; + } + if (source == "_pps_sync_"){ + _clock_ctrl->use_external_ref(); + _fifo_ctrl->poke32(TOREG(SR_MISC+2), 3); + return; + } + _fifo_ctrl->poke32(TOREG(SR_MISC+2), 0); + if (source == "auto") _clock_ctrl->use_auto_ref(); else if (source == "internal") _clock_ctrl->use_internal_ref(); else if (source == "external") _clock_ctrl->use_external_ref(); diff --git a/host/lib/usrp/b100/b100_impl.hpp b/host/lib/usrp/b100/b100_impl.hpp index 22e22bcff..250229fb8 100644 --- a/host/lib/usrp/b100/b100_impl.hpp +++ b/host/lib/usrp/b100/b100_impl.hpp @@ -19,20 +19,19 @@ #define INCLUDED_B100_IMPL_HPP #include "fx2_ctrl.hpp" -#include "b100_ctrl.hpp" #include "clock_ctrl.hpp" #include "codec_ctrl.hpp" -#include "spi_core_100.hpp" -#include "i2c_core_100.hpp" +#include "i2c_core_200.hpp" #include "rx_frontend_core_200.hpp" #include "tx_frontend_core_200.hpp" #include "rx_dsp_core_200.hpp" #include "tx_dsp_core_200.hpp" #include "time64_core_200.hpp" +#include "fifo_ctrl_excelsior.hpp" #include "user_settings_core_200.hpp" +#include "recv_packet_demuxer.hpp" #include <uhd/device.hpp> #include <uhd/property_tree.hpp> -#include <uhd/utils/pimpl.hpp> #include <uhd/types/dict.hpp> #include <uhd/types/sensors.hpp> #include <uhd/types/clock_config.hpp> @@ -47,10 +46,11 @@ static const double B100_LINK_RATE_BPS = 256e6/5; //pratical link rate (< 480 Mbps) static const std::string B100_FW_FILE_NAME = "usrp_b100_fw.ihx"; static const std::string B100_FPGA_FILE_NAME = "usrp_b100_fpga.bin"; -static const boost::uint16_t B100_FW_COMPAT_NUM = 0x03; -static const boost::uint16_t B100_FPGA_COMPAT_NUM = 10; -static const boost::uint32_t B100_RX_SID_BASE = 2; -static const boost::uint32_t B100_TX_ASYNC_SID = 1; +static const boost::uint16_t B100_FW_COMPAT_NUM = 0x04; +static const boost::uint16_t B100_FPGA_COMPAT_NUM = 11; +static const boost::uint32_t B100_RX_SID_BASE = 30; +static const boost::uint32_t B100_TX_ASYNC_SID = 10; +static const boost::uint32_t B100_CTRL_MSG_SID = 20; static const double B100_DEFAULT_TICK_RATE = 64e6; static const size_t B100_MAX_PKT_BYTE_LIMIT = 2048; static const std::string B100_EEPROM_MAP_KEY = "B100"; @@ -80,8 +80,8 @@ private: uhd::property_tree::sptr _tree; //controllers - spi_core_100::sptr _fpga_spi_ctrl; - i2c_core_100::sptr _fpga_i2c_ctrl; + fifo_ctrl_excelsior::sptr _fifo_ctrl; + i2c_core_200::sptr _fpga_i2c_ctrl; rx_frontend_core_200::sptr _rx_fe; tx_frontend_core_200::sptr _tx_fe; std::vector<rx_dsp_core_200::sptr> _rx_dsps; @@ -90,20 +90,17 @@ private: user_settings_core_200::sptr _user; b100_clock_ctrl::sptr _clock_ctrl; b100_codec_ctrl::sptr _codec_ctrl; - b100_ctrl::sptr _fpga_ctrl; uhd::usrp::fx2_ctrl::sptr _fx2_ctrl; //transports - uhd::transport::zero_copy_if::sptr _data_transport, _ctrl_transport; + uhd::transport::zero_copy_if::sptr _ctrl_transport; + uhd::transport::zero_copy_if::sptr _data_transport; + uhd::usrp::recv_packet_demuxer::sptr _recv_demuxer; //dboard stuff uhd::usrp::dboard_manager::sptr _dboard_manager; uhd::usrp::dboard_iface::sptr _dboard_iface; - //handle io stuff - UHD_PIMPL_DECL(io_impl) _io_impl; - void io_init(void); - //device properties interface uhd::property_tree::sptr get_tree(void) const{ return _tree; @@ -126,7 +123,6 @@ private: void update_clock_source(const std::string &); void enable_gpif(const bool); void clear_fpga_fifo(void); - void handle_async_message(uhd::transport::managed_recv_buffer::sptr); uhd::sensor_value_t get_ref_locked(void); void set_rx_fe_corrections(const double); void set_tx_fe_corrections(const double); diff --git a/host/lib/usrp/b100/b100_regs.hpp b/host/lib/usrp/b100/b100_regs.hpp index 987a09f03..48eb0460d 100644 --- a/host/lib/usrp/b100/b100_regs.hpp +++ b/host/lib/usrp/b100/b100_regs.hpp @@ -15,109 +15,49 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -//////////////////////////////////////////////////////////////// -// -// Memory map for wishbone bus -// -//////////////////////////////////////////////////////////////// - -// All addresses are byte addresses. All accesses are word (16-bit) accesses. -// This means that address bit 0 is usually 0. -// There are 11 bits of address for the control. - #ifndef INCLUDED_B100_REGS_HPP #define INCLUDED_B100_REGS_HPP -///////////////////////////////////////////////////// -// Slave pointers +#include <boost/cstdint.hpp> -#define B100_REG_SLAVE(n) ((n)<<7) +#define TOREG(x) ((x)*4) -///////////////////////////////////////////////////// -// Slave 0 -- Misc Regs +#define localparam static const int -#define B100_REG_MISC_BASE B100_REG_SLAVE(0) +localparam SR_MISC = 0; // 5 +localparam SR_USER_REGS = 5; // 2 +localparam SR_PADDER = 10; // 2 -#define B100_REG_MISC_LED B100_REG_MISC_BASE + 0 -#define B100_REG_MISC_SW B100_REG_MISC_BASE + 2 -#define B100_REG_MISC_CGEN_CTRL B100_REG_MISC_BASE + 4 -#define B100_REG_MISC_CGEN_ST B100_REG_MISC_BASE + 6 +localparam SR_TX_CTRL = 32; // 6 +localparam SR_TX_DSP = 40; // 5 +localparam SR_TX_FE = 48; // 5 -///////////////////////////////////////////////////// -// Slave 1 -- UART -// CLKDIV is 16 bits, others are only 8 +localparam SR_RX_CTRL0 = 96; // 9 +localparam SR_RX_DSP0 = 106; // 7 +localparam SR_RX_FE = 114; // 5 -#define B100_REG_UART_BASE B100_REG_SLAVE(1) +localparam SR_RX_CTRL1 = 128; // 9 +localparam SR_RX_DSP1 = 138; // 7 -#define B100_REG_UART_CLKDIV B100_REG_UART_BASE + 0 -#define B100_REG_UART_TXLEVEL B100_REG_UART_BASE + 2 -#define B100_REG_UART_RXLEVEL B100_REG_UART_BASE + 4 -#define B100_REG_UART_TXCHAR B100_REG_UART_BASE + 6 -#define B100_REG_UART_RXCHAR B100_REG_UART_BASE + 8 +localparam SR_TIME64 = 192; // 6 +localparam SR_SPI = 208; // 3 +localparam SR_I2C = 216; // 1 +localparam SR_GPIO = 224; // 5 -///////////////////////////////////////////////////// -// Slave 2 -- SPI Core -//these are 32-bit registers mapped onto the 16-bit Wishbone bus. -//Using peek32/poke32 should allow transparent use of these registers. -#define B100_REG_SPI_BASE B100_REG_SLAVE(2) +#define REG_RB_TIME_NOW_HI TOREG(10) +#define REG_RB_TIME_NOW_LO TOREG(11) +#define REG_RB_TIME_PPS_HI TOREG(14) +#define REG_RB_TIME_PPS_LO TOREG(15) +#define REG_RB_SPI TOREG(0) +#define REG_RB_COMPAT TOREG(1) +#define REG_RB_GPIO TOREG(3) +#define REG_RB_I2C TOREG(2) +#define REG_RB_NUM_RX_DSP TOREG(6) //spi slave constants #define B100_SPI_SS_AD9862 (1 << 2) #define B100_SPI_SS_TX_DB (1 << 1) #define B100_SPI_SS_RX_DB (1 << 0) -//////////////////////////////////////////////// -// Slave 3 -- I2C Core - -#define B100_REG_I2C_BASE B100_REG_SLAVE(3) - -/////////////////////////////////////////////////// -// Slave 7 -- Readback Mux 32 - -#define B100_REG_RB_MUX_32_BASE B100_REG_SLAVE(7) - -#define B100_REG_RB_TIME_NOW_HI B100_REG_RB_MUX_32_BASE + 0 -#define B100_REG_RB_TIME_NOW_LO B100_REG_RB_MUX_32_BASE + 4 -#define B100_REG_RB_TIME_PPS_HI B100_REG_RB_MUX_32_BASE + 8 -#define B100_REG_RB_TIME_PPS_LO B100_REG_RB_MUX_32_BASE + 12 -#define B100_REG_RB_MISC_TEST32 B100_REG_RB_MUX_32_BASE + 16 -#define B100_REG_RB_COMPAT B100_REG_RB_MUX_32_BASE + 24 -#define B100_REG_RB_GPIO B100_REG_RB_MUX_32_BASE + 28 - -//////////////////////////////////////////////////// -// Slaves 8 & 9 -- Settings Bus -// -// Output-only, no readback, 64 registers total -// Each register must be written 32 bits at a time -// First the address xxx_xx00 and then xxx_xx10 -// 64 total regs in address space -#define B100_SR_RX_CTRL0 0 // 9 regs (+0 to +8) -#define B100_SR_RX_DSP0 10 // 4 regs (+0 to +3) -#define B100_SR_RX_CTRL1 16 // 9 regs (+0 to +8) -#define B100_SR_RX_DSP1 26 // 4 regs (+0 to +3) -#define B100_SR_TX_CTRL 32 // 4 regs (+0 to +3) -#define B100_SR_TX_DSP 38 // 3 regs (+0 to +2) - -#define B100_SR_TIME64 42 // 6 regs (+0 to +5) -#define B100_SR_RX_FRONT 48 // 5 regs (+0 to +4) -#define B100_SR_TX_FRONT 54 // 5 regs (+0 to +4) - -#define B100_SR_REG_TEST32 60 // 1 reg -#define B100_SR_CLEAR_FIFO 61 // 1 reg -#define B100_SR_GLOBAL_RESET 63 // 1 reg -#define B100_SR_USER_REGS 64 // 2 regs - -#define B100_SR_GPIO 128 - -#define B100_REG_SR_ADDR(n) (B100_REG_SLAVE(8) + (4*(n))) - -#define B100_REG_SR_MISC_TEST32 B100_REG_SR_ADDR(B100_SR_REG_TEST32) - -///////////////////////////////////////////////// -// Magic reset regs -//////////////////////////////////////////////// -#define B100_REG_CLEAR_FIFO B100_REG_SR_ADDR(B100_SR_CLEAR_FIFO) -#define B100_REG_GLOBAL_RESET B100_REG_SR_ADDR(B100_SR_GLOBAL_RESET) - -#endif +#endif /*INCLUDED_B100_REGS_HPP*/ diff --git a/host/lib/usrp/b100/ctrl_packet.hpp b/host/lib/usrp/b100/ctrl_packet.hpp deleted file mode 100644 index bab1f0de1..000000000 --- a/host/lib/usrp/b100/ctrl_packet.hpp +++ /dev/null @@ -1,75 +0,0 @@ -// -// Copyright 2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#ifndef INCLUDED_CTRL_PACKET_HPP -#define INCLUDED_CTRL_PACKET_HPP - -#include <uhd/config.hpp> -#include <boost/cstdint.hpp> -#include <uhd/types/serial.hpp> - -typedef std::vector<boost::uint16_t> ctrl_data_t; - -/*! - * Control packet operation type - */ -enum ctrl_pkt_op_t { - CTRL_PKT_OP_WRITE = 1, - CTRL_PKT_OP_READ = 2, - CTRL_PKT_OP_READBACK = 3 -}; - -/*! - * Control packet transaction length - */ -const size_t CTRL_PACKET_LENGTH = 32; -const size_t CTRL_PACKET_HEADER_LENGTH = 8; -const size_t CTRL_PACKET_DATA_LENGTH = 24; //=length-header - -/*! - * Control packet header magic value - */ -const boost::uint8_t CTRL_PACKET_HEADER_MAGIC = 0xAA; - -/*! - * Callback triggers for readback operation - */ -//FIXME: these are not real numbers, callbacks aren't implemented yet -const boost::uint16_t CTRL_PACKET_CALLBACK_SPI = 0x0001; -const boost::uint16_t CTRL_PACKET_CALLBACK_I2C = 0x0002; -//and so on - -/*! - * Metadata structure to describe a control packet - */ -struct UHD_API ctrl_pkt_meta_t { - ctrl_pkt_op_t op; - boost::uint8_t callbacks; - boost::uint8_t seq; - boost::uint16_t len; - boost::uint32_t addr; -}; - -/*! - * Full control packet structure - */ -struct UHD_API ctrl_pkt_t { - ctrl_pkt_meta_t pkt_meta; - ctrl_data_t data; -}; - -#endif /* INCLUDED_CTRL_PACKET_HPP */ diff --git a/host/lib/usrp/b100/dboard_iface.cpp b/host/lib/usrp/b100/dboard_iface.cpp index 39ad5c5ac..25604da72 100644 --- a/host/lib/usrp/b100/dboard_iface.cpp +++ b/host/lib/usrp/b100/dboard_iface.cpp @@ -45,7 +45,7 @@ public: _spi_iface = spi_iface; _clock = clock; _codec = codec; - _gpio = gpio_core_200::make(_wb_iface, B100_REG_SR_ADDR(B100_SR_GPIO), B100_REG_RB_GPIO); + _gpio = gpio_core_200::make(_wb_iface, TOREG(SR_GPIO), REG_RB_GPIO); //init the clock rate shadows this->set_clock_rate(UNIT_RX, _clock->get_fpga_clock_rate()); diff --git a/host/lib/usrp/b100/io_impl.cpp b/host/lib/usrp/b100/io_impl.cpp index 674380cca..723756dcc 100644 --- a/host/lib/usrp/b100/io_impl.cpp +++ b/host/lib/usrp/b100/io_impl.cpp @@ -15,16 +15,10 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -#include "recv_packet_demuxer.hpp" #include "validate_subdev_spec.hpp" -#include "async_packet_handler.hpp" #include "../../transport/super_recv_packet_handler.hpp" #include "../../transport/super_send_packet_handler.hpp" -#include "usrp_commands.h" #include "b100_impl.hpp" -#include "b100_regs.hpp" -#include <uhd/utils/thread_priority.hpp> -#include <uhd/transport/bounded_buffer.hpp> #include <boost/bind.hpp> #include <boost/format.hpp> #include <boost/bind.hpp> @@ -37,66 +31,6 @@ using namespace uhd; using namespace uhd::usrp; using namespace uhd::transport; -/*********************************************************************** - * IO Implementation Details - **********************************************************************/ -struct b100_impl::io_impl{ - io_impl(void): - async_msg_fifo(1000/*messages deep*/) - { /* NOP */ } - - zero_copy_if::sptr data_transport; - bounded_buffer<async_metadata_t> async_msg_fifo; - recv_packet_demuxer::sptr demuxer; - double tick_rate; -}; - -/*********************************************************************** - * Initialize internals within this file - **********************************************************************/ -void b100_impl::io_init(void){ - - //clear fifo state machines - _fpga_ctrl->poke32(B100_REG_CLEAR_FIFO, 0); - - //allocate streamer weak ptrs containers - _rx_streamers.resize(_rx_dsps.size()); - _tx_streamers.resize(1/*known to be 1 dsp*/); - - //create new io impl - _io_impl = UHD_PIMPL_MAKE(io_impl, ()); - _io_impl->demuxer = recv_packet_demuxer::make(_data_transport, _rx_dsps.size(), B100_RX_SID_BASE); - - //now its safe to register the async callback - _fpga_ctrl->set_async_cb(boost::bind(&b100_impl::handle_async_message, this, _1)); -} - -void b100_impl::handle_async_message(managed_recv_buffer::sptr rbuf){ - vrt::if_packet_info_t if_packet_info; - if_packet_info.num_packet_words32 = rbuf->size()/sizeof(boost::uint32_t); - const boost::uint32_t *vrt_hdr = rbuf->cast<const boost::uint32_t *>(); - try{ - vrt::if_hdr_unpack_le(vrt_hdr, if_packet_info); - } - catch(const std::exception &e){ - UHD_MSG(error) << "Error (handle_async_message): " << e.what() << std::endl; - } - - if (if_packet_info.sid == B100_TX_ASYNC_SID and if_packet_info.packet_type != vrt::if_packet_info_t::PACKET_TYPE_DATA){ - - //fill in the async metadata - async_metadata_t metadata; - load_metadata_from_buff(uhd::wtohx<boost::uint32_t>, metadata, if_packet_info, vrt_hdr, _io_impl->tick_rate); - - //push the message onto the queue - _io_impl->async_msg_fifo.push_with_pop_on_full(metadata); - - //print some fastpath messages - standard_async_msg_prints(metadata); - } - else UHD_MSG(error) << "Unknown async packet" << std::endl; -} - void b100_impl::update_rates(void){ const fs_path mb_path = "/mboards/0"; _tree->access<double>(mb_path / "tick_rate").update(); @@ -111,7 +45,6 @@ void b100_impl::update_rates(void){ } void b100_impl::update_tick_rate(const double rate){ - _io_impl->tick_rate = rate; //update the tick rate on all existing streamers -> thread safe for (size_t i = 0; i < _rx_streamers.size(); i++){ @@ -181,8 +114,7 @@ void b100_impl::update_tx_subdev_spec(const uhd::usrp::subdev_spec_t &spec){ bool b100_impl::recv_async_msg( async_metadata_t &async_metadata, double timeout ){ - boost::this_thread::disable_interruption di; //disable because the wait can throw - return _io_impl->async_msg_fifo.pop_with_timed_wait(async_metadata, timeout); + return _fifo_ctrl->pop_async_msg(async_metadata, timeout); } /*********************************************************************** @@ -227,7 +159,7 @@ rx_streamer::sptr b100_impl::get_rx_stream(const uhd::stream_args_t &args_){ _rx_dsps[dsp]->set_nsamps_per_packet(spp); //seems to be a good place to set this _rx_dsps[dsp]->setup(args); my_streamer->set_xport_chan_get_buff(chan_i, boost::bind( - &recv_packet_demuxer::get_recv_buff, _io_impl->demuxer, dsp, _1 + &recv_packet_demuxer::get_recv_buff, _recv_demuxer, dsp, _1 ), true /*flush*/); my_streamer->set_overflow_handler(chan_i, boost::bind( &rx_dsp_core_200::handle_overflow, _rx_dsps[dsp] diff --git a/host/lib/usrp/common/CMakeLists.txt b/host/lib/usrp/common/CMakeLists.txt index 9abd34afa..fa07e3d1d 100644 --- a/host/lib/usrp/common/CMakeLists.txt +++ b/host/lib/usrp/common/CMakeLists.txt @@ -1,5 +1,5 @@ # -# Copyright 2011 Ettus Research LLC +# Copyright 2011-2012 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -32,4 +32,5 @@ LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/apply_corrections.cpp ${CMAKE_CURRENT_SOURCE_DIR}/validate_subdev_spec.cpp ${CMAKE_CURRENT_SOURCE_DIR}/recv_packet_demuxer.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/fifo_ctrl_excelsior.cpp ) diff --git a/host/lib/usrp/common/fifo_ctrl_excelsior.cpp b/host/lib/usrp/common/fifo_ctrl_excelsior.cpp new file mode 100644 index 000000000..5e4a1e243 --- /dev/null +++ b/host/lib/usrp/common/fifo_ctrl_excelsior.cpp @@ -0,0 +1,293 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "fifo_ctrl_excelsior.hpp" +#include "async_packet_handler.hpp" +#include <uhd/exception.hpp> +#include <uhd/utils/msg.hpp> +#include <uhd/utils/byteswap.hpp> +#include <uhd/utils/tasks.hpp> +#include <uhd/utils/safe_call.hpp> +#include <uhd/utils/thread_priority.hpp> +#include <uhd/transport/vrt_if_packet.hpp> +#include <uhd/transport/bounded_buffer.hpp> +#include <boost/thread/mutex.hpp> +#include <boost/thread/thread.hpp> +#include <boost/format.hpp> +#include <boost/bind.hpp> + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; + +static const size_t POKE32_CMD = (1 << 8); +static const size_t PEEK32_CMD = 0; +static const double ACK_TIMEOUT = 0.5; +static const double MASSIVE_TIMEOUT = 10.0; //for when we wait on a timed command +static const boost::uint32_t MAX_SEQS_OUT = 15; + +#define SPI_DIV _config.spi_base + 0 +#define SPI_CTRL _config.spi_base + 4 +#define SPI_DATA _config.spi_base + 8 +#define SPI_DIVIDER 4 + +struct ctrl_result_t{ + boost::uint32_t msg[2]; +}; + +class fifo_ctrl_excelsior_impl : public fifo_ctrl_excelsior{ +public: + + fifo_ctrl_excelsior_impl(zero_copy_if::sptr xport, const fifo_ctrl_excelsior_config &config): + _xport(xport), + _config(config), + _seq_out(0), + _seq_ack(0), + _timeout(ACK_TIMEOUT), + _async_fifo(1000), + _ctrl_fifo(MAX_SEQS_OUT+1) + { + while (_xport->get_recv_buff(0.0)){} //flush + this->set_time(uhd::time_spec_t(0.0)); + this->set_tick_rate(1.0); //something possible but bogus + _msg_task = task::make(boost::bind(&fifo_ctrl_excelsior_impl::handle_msg, this)); + this->init_spi(); + } + + ~fifo_ctrl_excelsior_impl(void){ + _timeout = ACK_TIMEOUT; //reset timeout to something small + UHD_SAFE_CALL( + this->peek32(0); //dummy peek with the purpose of ack'ing all packets + ) + } + + bool pop_async_msg(async_metadata_t &async_metadata, double timeout){ + boost::this_thread::disable_interruption di; //disable because the wait can throw + return _async_fifo.pop_with_timed_wait(async_metadata, timeout); + } + + void handle_msg(void){ + set_thread_priority_safe(); + while (not boost::this_thread::interruption_requested()){ + this->handle_msg1(); + } + } + + void handle_msg1(void){ + managed_recv_buffer::sptr buff = _xport->get_recv_buff(); + if (not buff) return; + const boost::uint32_t *pkt = buff->cast<const boost::uint32_t *>(); + vrt::if_packet_info_t packet_info; + packet_info.num_packet_words32 = buff->size()/sizeof(boost::uint32_t); + try{ + vrt::if_hdr_unpack_le(pkt, packet_info); + } + catch(const std::exception &ex){ + UHD_MSG(error) << "FIFO ctrl bad VITA packet: " << ex.what() << std::endl; + } + if (packet_info.has_sid and packet_info.sid == _config.ctrl_sid_base){ + ctrl_result_t res = ctrl_result_t(); + res.msg[0] = uhd::wtohx(pkt[packet_info.num_header_words32+0]); + res.msg[1] = uhd::wtohx(pkt[packet_info.num_header_words32+1]); + _ctrl_fifo.push_with_haste(res); + } + else if (packet_info.has_sid and packet_info.sid >= _config.async_sid_base and packet_info.sid <= _config.async_sid_base + _config.num_async_chan){ + async_metadata_t metadata; + load_metadata_from_buff(uhd::wtohx<boost::uint32_t>, metadata, packet_info, pkt, _tick_rate, packet_info.sid - _config.async_sid_base); + _async_fifo.push_with_pop_on_full(metadata); + standard_async_msg_prints(metadata); + } + else{ + UHD_MSG(error) << "FIFO ctrl got unknown SID: " << packet_info.sid << std::endl; + } + } + + /******************************************************************* + * Peek and poke 32 bit implementation + ******************************************************************/ + void poke32(wb_addr_type addr, boost::uint32_t data){ + boost::mutex::scoped_lock lock(_mutex); + + this->send_pkt(addr, data, POKE32_CMD); + + this->wait_for_ack(_seq_out-MAX_SEQS_OUT); + } + + boost::uint32_t peek32(wb_addr_type addr){ + boost::mutex::scoped_lock lock(_mutex); + + this->send_pkt(addr, 0, PEEK32_CMD); + + return this->wait_for_ack(_seq_out); + } + + /******************************************************************* + * Peek and poke 16 bit not implemented + ******************************************************************/ + void poke16(wb_addr_type, boost::uint16_t){ + throw uhd::not_implemented_error("poke16 not implemented in fifo ctrl module"); + } + + boost::uint16_t peek16(wb_addr_type){ + throw uhd::not_implemented_error("peek16 not implemented in fifo ctrl module"); + } + + /******************************************************************* + * FIFO controlled SPI implementation + ******************************************************************/ + void init_spi(void){ + boost::mutex::scoped_lock lock(_mutex); + + this->send_pkt(SPI_DIV, SPI_DIVIDER, POKE32_CMD); + this->wait_for_ack(_seq_out-MAX_SEQS_OUT); + + _ctrl_word_cache = 0; // force update first time around + } + + boost::uint32_t transact_spi( + int which_slave, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits, + bool readback + ){ + boost::mutex::scoped_lock lock(_mutex); + + //load control word + boost::uint32_t ctrl_word = 0; + ctrl_word |= ((which_slave & 0xffffff) << 0); + ctrl_word |= ((num_bits & 0x3ff) << 24); + if (config.mosi_edge == spi_config_t::EDGE_FALL) ctrl_word |= (1 << 31); + if (config.miso_edge == spi_config_t::EDGE_RISE) ctrl_word |= (1 << 30); + + //load data word (must be in upper bits) + const boost::uint32_t data_out = data << (32 - num_bits); + + //conditionally send control word + if (_ctrl_word_cache != ctrl_word){ + this->send_pkt(SPI_CTRL, ctrl_word, POKE32_CMD); + this->wait_for_ack(_seq_out-MAX_SEQS_OUT); + _ctrl_word_cache = ctrl_word; + } + + //send data word + this->send_pkt(SPI_DATA, data_out, POKE32_CMD); + this->wait_for_ack(_seq_out-MAX_SEQS_OUT); + + //conditional readback + if (readback){ + this->send_pkt(_config.spi_rb, 0, PEEK32_CMD); + return this->wait_for_ack(_seq_out); + } + + return 0; + } + + /******************************************************************* + * Update methods for time + ******************************************************************/ + void set_time(const uhd::time_spec_t &time){ + boost::mutex::scoped_lock lock(_mutex); + _time = time; + _use_time = _time != uhd::time_spec_t(0.0); + if (_use_time) _timeout = MASSIVE_TIMEOUT; //permanently sets larger timeout + } + + void set_tick_rate(const double rate){ + boost::mutex::scoped_lock lock(_mutex); + _tick_rate = rate; + } + +private: + + /******************************************************************* + * Primary control and interaction private methods + ******************************************************************/ + UHD_INLINE void send_pkt(wb_addr_type addr, boost::uint32_t data, int cmd){ + managed_send_buffer::sptr buff = _xport->get_send_buff(0.0); + if (not buff){ + throw uhd::runtime_error("fifo ctrl timed out getting a send buffer"); + } + boost::uint32_t *pkt = buff->cast<boost::uint32_t *>(); + + //load packet info + vrt::if_packet_info_t packet_info; + packet_info.packet_type = vrt::if_packet_info_t::PACKET_TYPE_CONTEXT; + packet_info.num_payload_words32 = 2; + packet_info.num_payload_bytes = packet_info.num_payload_words32*sizeof(boost::uint32_t); + packet_info.packet_count = ++_seq_out; + packet_info.tsf = _time.to_ticks(_tick_rate); + packet_info.sob = false; + packet_info.eob = false; + packet_info.has_sid = false; + packet_info.has_cid = false; + packet_info.has_tsi = false; + packet_info.has_tsf = _use_time; + packet_info.has_tlr = false; + + //load header + vrt::if_hdr_pack_le(pkt, packet_info); + + //load payload + const boost::uint32_t ctrl_word = (addr/4 & 0xff) | cmd | (_seq_out << 16); + pkt[packet_info.num_header_words32+0] = uhd::htowx(ctrl_word); + pkt[packet_info.num_header_words32+1] = uhd::htowx(data); + + //send the buffer over the interface + buff->commit(sizeof(boost::uint32_t)*(packet_info.num_packet_words32)); + } + + UHD_INLINE bool wraparound_lt16(const boost::int16_t i0, const boost::int16_t i1){ + if (((i0 ^ i1) & 0x8000) == 0) //same sign bits + return boost::uint16_t(i0) < boost::uint16_t(i1); + return boost::int16_t(i1 - i0) > 0; + } + + UHD_INLINE boost::uint32_t wait_for_ack(const boost::uint16_t seq_to_ack){ + + while (wraparound_lt16(_seq_ack, seq_to_ack)){ + ctrl_result_t res = ctrl_result_t(); + if (not _ctrl_fifo.pop_with_timed_wait(res, _timeout)){ + throw uhd::runtime_error("fifo ctrl timed out looking for acks"); + } + _seq_ack = res.msg[0] >> 16; + if (_seq_ack == seq_to_ack) return res.msg[1]; + } + + return 0; + } + + zero_copy_if::sptr _xport; + const fifo_ctrl_excelsior_config _config; + boost::mutex _mutex; + boost::uint16_t _seq_out; + boost::uint16_t _seq_ack; + uhd::time_spec_t _time; + bool _use_time; + double _tick_rate; + double _timeout; + boost::uint32_t _ctrl_word_cache; + bounded_buffer<async_metadata_t> _async_fifo; + bounded_buffer<ctrl_result_t> _ctrl_fifo; + task::sptr _msg_task; +}; + + +fifo_ctrl_excelsior::sptr fifo_ctrl_excelsior::make(zero_copy_if::sptr xport, const fifo_ctrl_excelsior_config &config) +{ + return sptr(new fifo_ctrl_excelsior_impl(xport, config)); +} diff --git a/host/lib/usrp/common/fifo_ctrl_excelsior.hpp b/host/lib/usrp/common/fifo_ctrl_excelsior.hpp new file mode 100644 index 000000000..c3ef65a2c --- /dev/null +++ b/host/lib/usrp/common/fifo_ctrl_excelsior.hpp @@ -0,0 +1,63 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_B200_CTRL_HPP +#define INCLUDED_B200_CTRL_HPP + +#include <uhd/types/time_spec.hpp> +#include <uhd/types/metadata.hpp> +#include <uhd/types/serial.hpp> +#include <uhd/transport/zero_copy.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include "wb_iface.hpp" +#include <string> + + +struct fifo_ctrl_excelsior_config +{ + size_t async_sid_base; + size_t num_async_chan; + size_t ctrl_sid_base; + size_t spi_base; + size_t spi_rb; +}; + +/*! + * Provide access to peek, poke, spi, and async messages. + */ +class fifo_ctrl_excelsior : public wb_iface, public uhd::spi_iface{ +public: + typedef boost::shared_ptr<fifo_ctrl_excelsior> sptr; + + //! Make a new control object + static sptr make( + uhd::transport::zero_copy_if::sptr xport, + const fifo_ctrl_excelsior_config &config + ); + + //! Set the command time that will activate + virtual void set_time(const uhd::time_spec_t &time) = 0; + + //! Set the tick rate (converting time into ticks) + virtual void set_tick_rate(const double rate) = 0; + + //! Pop an async message from the queue or timeout + virtual bool pop_async_msg(uhd::async_metadata_t &async_metadata, double timeout) = 0; +}; + +#endif /* INCLUDED_B200_CTRL_HPP */ diff --git a/host/lib/usrp/e100/dboard_iface.cpp b/host/lib/usrp/e100/dboard_iface.cpp index 6afc7bc48..532b2dc9e 100644 --- a/host/lib/usrp/e100/dboard_iface.cpp +++ b/host/lib/usrp/e100/dboard_iface.cpp @@ -45,7 +45,7 @@ public: _spi_iface = spi_iface; _clock = clock; _codec = codec; - _gpio = gpio_core_200::make(_wb_iface, E100_REG_SR_ADDR(UE_SR_GPIO), E100_REG_RB_GPIO); + _gpio = gpio_core_200::make(_wb_iface, TOREG(SR_GPIO), REG_RB_GPIO); //init the clock rate shadows this->set_clock_rate(UNIT_RX, _clock->get_fpga_clock_rate()); diff --git a/host/lib/usrp/e100/e100_ctrl.cpp b/host/lib/usrp/e100/e100_ctrl.cpp index eb529c9c1..5a9b93633 100644 --- a/host/lib/usrp/e100/e100_ctrl.cpp +++ b/host/lib/usrp/e100/e100_ctrl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -23,13 +23,16 @@ #include <sys/ioctl.h> //ioctl #include <fcntl.h> //open, close #include <linux/usrp_e.h> //ioctl structures and constants +#include <poll.h> //poll #include <boost/thread/thread.hpp> //sleep #include <boost/thread/mutex.hpp> +#include <boost/thread/condition_variable.hpp> #include <boost/foreach.hpp> #include <boost/format.hpp> #include <fstream> using namespace uhd; +using namespace uhd::transport; /*********************************************************************** * Sysfs GPIO wrapper class @@ -71,6 +74,11 @@ private: }; /*********************************************************************** + * Protection for dual GPIO access - sometimes MISO, sometimes have resp + **********************************************************************/ +static boost::mutex gpio_irq_resp_mutex; + +/*********************************************************************** * Aux spi implementation **********************************************************************/ class aux_spi_iface_impl : public spi_iface{ @@ -87,6 +95,8 @@ public: size_t num_bits, bool readback ){ + boost::mutex::scoped_lock lock(gpio_irq_resp_mutex); + boost::uint32_t rb_bits = 0; this->spi_sen_gpio(0); @@ -244,6 +254,57 @@ uhd::uart_iface::sptr e100_ctrl::make_gps_uart_iface(const std::string &node){ } /*********************************************************************** + * Simple managed buffers + **********************************************************************/ +struct e100_simpl_mrb : managed_recv_buffer +{ + usrp_e_ctl32 data; + e100_ctrl *ctrl; + + void release(void) + { + //NOP + } + + sptr get_new(void) + { + const size_t max_words32 = 8; //.LAST_ADDR(10'h00f)) resp_fifo_to_gpmc + + //load the data struct + data.offset = 0; + data.count = max_words32; + + //call the ioctl + ctrl->ioctl(USRP_E_READ_CTL32, &data); + + if (data.buf[0] == 0 or ~data.buf[0] == 0) return sptr(); //bad VRT hdr, treat like timeout + + return make(this, data.buf, sizeof(data.buf)); + } +}; + +struct e100_simpl_msb : managed_send_buffer +{ + usrp_e_ctl32 data; + e100_ctrl *ctrl; + + void release(void) + { + //load the data struct + data.offset = 0; + data.count = size()/4+1/*1 for header offset*/; + + //call the ioctl + ctrl->ioctl(USRP_E_WRITE_CTL32, &data); + } + + sptr get_new(void) + { + return make(this, data.buf+1, sizeof(data.buf)-4); + } +}; + +/*********************************************************************** * USRP-E100 control implementation **********************************************************************/ class e100_ctrl_impl : public e100_ctrl{ @@ -273,11 +334,24 @@ public: ) % USRP_E_COMPAT_NUMBER % module_compat_num)); } - //perform a global reset after opening - this->poke32(E100_REG_GLOBAL_RESET, 0); + //hit the magic arst condition + //async_reset <= ~EM_NCS6 && ~EM_NWE && (EM_A[9:2] == 8'hff) && EM_D[0]; + usrp_e_ctl16 datax; + datax.offset = 0x3fc; + datax.count = 2; + datax.buf[0] = 1; + datax.buf[1] = 0; + this->ioctl(USRP_E_WRITE_CTL16, &datax); + + std::ofstream edge_file("/sys/class/gpio/gpio147/edge"); + edge_file << "rising" << std::endl << std::flush; + edge_file.close(); + _irq_fd = ::open("/sys/class/gpio/gpio147/value", O_RDONLY); + if (_irq_fd < 0) UHD_MSG(error) << "Unable to open GPIO for IRQ\n"; } ~e100_ctrl_impl(void){ + ::close(_irq_fd); ::close(_node_fd); } @@ -293,58 +367,76 @@ public: )); } } + /******************************************************************* - * Peek and Poke + * The managed buffer interface ******************************************************************/ - void poke32(wb_addr_type addr, boost::uint32_t value){ - //load the data struct - usrp_e_ctl32 data; - data.offset = addr; - data.count = 1; - data.buf[0] = value; - - //call the ioctl - this->ioctl(USRP_E_WRITE_CTL32, &data); + UHD_INLINE bool resp_read(void) + { + //thread stuff ensures that this GPIO isnt shared + boost::mutex::scoped_lock lock(gpio_irq_resp_mutex); + + //perform a read of the GPIO IRQ state + char ch; + ::read(_irq_fd, &ch, sizeof(ch)); + ::lseek(_irq_fd, SEEK_SET, 0); + return ch == '1'; } - void poke16(wb_addr_type addr, boost::uint16_t value){ - //load the data struct - usrp_e_ctl16 data; - data.offset = addr; - data.count = 1; - data.buf[0] = value; + UHD_INLINE bool resp_wait(const double timeout) + { + //perform a check, if it fails, poll + if (this->resp_read()) return true; - //call the ioctl - this->ioctl(USRP_E_WRITE_CTL16, &data); + //poll IRQ GPIO for some action + pollfd pfd; + pfd.fd = _irq_fd; + pfd.events = POLLPRI | POLLERR; + ::poll(&pfd, 1, long(timeout*1000)/*ms*/); + + //perform a GPIO read again for result + return this->resp_read(); } - boost::uint32_t peek32(wb_addr_type addr){ - //load the data struct - usrp_e_ctl32 data; - data.offset = addr; - data.count = 1; + managed_recv_buffer::sptr get_recv_buff(double timeout) + { + if (not this->resp_wait(timeout)) + { + return managed_recv_buffer::sptr(); + } - //call the ioctl - this->ioctl(USRP_E_READ_CTL32, &data); + _mrb.ctrl = this; + return _mrb.get_new(); + } - return data.buf[0]; + managed_send_buffer::sptr get_send_buff(double) + { + _msb.ctrl = this; + return _msb.get_new(); } - boost::uint16_t peek16(wb_addr_type addr){ - //load the data struct - usrp_e_ctl16 data; - data.offset = addr; - data.count = 1; + size_t get_num_recv_frames(void) const{ + return 1; + } - //call the ioctl - this->ioctl(USRP_E_READ_CTL16, &data); + size_t get_recv_frame_size(void) const{ + return sizeof(_mrb.data.buf); + } + + size_t get_num_send_frames(void) const{ + return 1; + } - return data.buf[0]; + size_t get_send_frame_size(void) const{ + return sizeof(_msb.data.buf); } private: int _node_fd; + int _irq_fd; boost::mutex _ioctl_mutex; + e100_simpl_mrb _mrb; + e100_simpl_msb _msb; }; /*********************************************************************** diff --git a/host/lib/usrp/e100/e100_ctrl.hpp b/host/lib/usrp/e100/e100_ctrl.hpp index fd66791d4..72dce134e 100644 --- a/host/lib/usrp/e100/e100_ctrl.hpp +++ b/host/lib/usrp/e100/e100_ctrl.hpp @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -18,12 +18,11 @@ #ifndef INCLUDED_B100_CTRL_HPP #define INCLUDED_B100_CTRL_HPP -#include "wb_iface.hpp" +#include <uhd/transport/zero_copy.hpp> #include <uhd/types/serial.hpp> #include <boost/shared_ptr.hpp> -#include <boost/utility.hpp> -class e100_ctrl : boost::noncopyable, public wb_iface{ +class e100_ctrl : public uhd::transport::zero_copy_if{ public: typedef boost::shared_ptr<e100_ctrl> sptr; @@ -33,7 +32,7 @@ public: //! Make an i2c iface for the i2c device node static uhd::i2c_iface::sptr make_dev_i2c_iface(const std::string &node); - //! Make an i2c iface for the i2c device node + //! Make a spi iface for the spi gpio static uhd::spi_iface::sptr make_aux_spi_iface(void); //! Make a uart iface for the uart device node diff --git a/host/lib/usrp/e100/e100_impl.cpp b/host/lib/usrp/e100/e100_impl.cpp index d55ea5ec5..eb8804776 100644 --- a/host/lib/usrp/e100/e100_impl.cpp +++ b/host/lib/usrp/e100/e100_impl.cpp @@ -28,6 +28,7 @@ #include <boost/functional/hash.hpp> #include <boost/assign/list_of.hpp> #include <fstream> +#include <ctime> using namespace uhd; using namespace uhd::usrp; @@ -86,15 +87,6 @@ static device_addrs_t e100_find(const device_addr_t &hint){ /*********************************************************************** * Make **********************************************************************/ -static size_t hash_fpga_file(const std::string &file_path){ - size_t hash = 0; - std::ifstream file(file_path.c_str()); - if (not file.good()) throw uhd::io_error("cannot open fpga file for read: " + file_path); - while (file.good()) boost::hash_combine(hash, file.get()); - file.close(); - return hash; -} - static device::sptr e100_make(const device_addr_t &device_addr){ return device::sptr(new e100_impl(device_addr)); } @@ -114,10 +106,6 @@ static const uhd::dict<std::string, std::string> model_to_fpga_file_name = boost e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ _tree = property_tree::make(); - //setup the main interface into fpga - const std::string node = device_addr["node"]; - _fpga_ctrl = e100_ctrl::make(node); - //read the eeprom so we can determine the hardware _dev_i2c_iface = e100_ctrl::make_dev_i2c_iface(E100_I2C_DEV_NODE); const mboard_eeprom_t mb_eeprom(*_dev_i2c_iface, E100_EEPROM_MAP_KEY); @@ -133,20 +121,19 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ //extract the fpga path and compute hash const std::string default_fpga_file_name = model_to_fpga_file_name[model]; - const std::string e100_fpga_image = find_image_path(device_addr.get("fpga", default_fpga_file_name)); - const boost::uint32_t file_hash = boost::uint32_t(hash_fpga_file(e100_fpga_image)); - - //When the hash does not match: - // - close the device node - // - load the fpga bin file - // - re-open the device node - if (_fpga_ctrl->peek32(E100_REG_RB_MISC_TEST32) != file_hash){ - _fpga_ctrl.reset(); - e100_load_fpga(e100_fpga_image); - _fpga_ctrl = e100_ctrl::make(node); + std::string e100_fpga_image; + try{ + e100_fpga_image = find_image_path(device_addr.get("fpga", default_fpga_file_name)); } + catch(...){ + UHD_MSG(error) << boost::format("Could not find FPGA image. %s\n") % print_images_error(); + throw; + } + e100_load_fpga(e100_fpga_image); - //setup clock control here to ensure that the FPGA has a good clock before we continue + //////////////////////////////////////////////////////////////////// + // Setup the FPGA clock over AUX SPI + //////////////////////////////////////////////////////////////////// bool dboard_clocks_diff = true; if (mb_eeprom.get("revision", "0") == "3") dboard_clocks_diff = false; else if (mb_eeprom.get("revision", "0") == "4") dboard_clocks_diff = true; @@ -158,12 +145,32 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ _aux_spi_iface = e100_ctrl::make_aux_spi_iface(); _clock_ctrl = e100_clock_ctrl::make(_aux_spi_iface, master_clock_rate, dboard_clocks_diff); + //////////////////////////////////////////////////////////////////// + // setup the main interface into fpga + // - do this after aux spi, because we share gpio147 + //////////////////////////////////////////////////////////////////// + const std::string node = device_addr["node"]; + _fpga_ctrl = e100_ctrl::make(node); + + //////////////////////////////////////////////////////////////////// + // Initialize FPGA control communication + //////////////////////////////////////////////////////////////////// + fifo_ctrl_excelsior_config fifo_ctrl_config; + fifo_ctrl_config.async_sid_base = E100_TX_ASYNC_SID; + fifo_ctrl_config.num_async_chan = 1; + fifo_ctrl_config.ctrl_sid_base = E100_CTRL_MSG_SID; + fifo_ctrl_config.spi_base = TOREG(SR_SPI); + fifo_ctrl_config.spi_rb = REG_RB_SPI; + _fifo_ctrl = fifo_ctrl_excelsior::make(_fpga_ctrl, fifo_ctrl_config); + //Perform wishbone readback tests, these tests also write the hash bool test_fail = false; - UHD_MSG(status) << "Performing wishbone readback test... " << std::flush; + UHD_MSG(status) << "Performing control readback test... " << std::flush; + size_t hash = time(NULL); for (size_t i = 0; i < 100; i++){ - _fpga_ctrl->poke32(E100_REG_SR_MISC_TEST32, file_hash); - test_fail = _fpga_ctrl->peek32(E100_REG_RB_MISC_TEST32) != file_hash; + boost::hash_combine(hash, i); + _fifo_ctrl->poke32(TOREG(SR_MISC+0), boost::uint32_t(hash)); + test_fail = _fifo_ctrl->peek32(REG_RB_CONFIG0) != boost::uint32_t(hash); if (test_fail) break; //exit loop on any failure } UHD_MSG(status) << ((test_fail)? " fail" : "pass") << std::endl; @@ -180,8 +187,7 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ //////////////////////////////////////////////////////////////////// // Create controller objects //////////////////////////////////////////////////////////////////// - _fpga_i2c_ctrl = i2c_core_100::make(_fpga_ctrl, E100_REG_SLAVE(3)); - _fpga_spi_ctrl = spi_core_100::make(_fpga_ctrl, E100_REG_SLAVE(2)); + _fpga_i2c_ctrl = i2c_core_200::make(_fifo_ctrl, TOREG(SR_I2C), REG_RB_I2C); _data_transport = e100_make_mmap_zero_copy(_fpga_ctrl); //////////////////////////////////////////////////////////////////// @@ -205,12 +211,17 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ //^^^ clock created up top, just reg props here... ^^^ _tree->create<double>(mb_path / "tick_rate") .publish(boost::bind(&e100_clock_ctrl::get_fpga_clock_rate, _clock_ctrl)) + .subscribe(boost::bind(&fifo_ctrl_excelsior::set_tick_rate, _fifo_ctrl, _1)) .subscribe(boost::bind(&e100_impl::update_tick_rate, this, _1)); + //subscribe the command time while we are at it + _tree->create<time_spec_t>(mb_path / "time/cmd") + .subscribe(boost::bind(&fifo_ctrl_excelsior::set_time, _fifo_ctrl, _1)); + //////////////////////////////////////////////////////////////////// // create codec control objects //////////////////////////////////////////////////////////////////// - _codec_ctrl = e100_codec_ctrl::make(_fpga_spi_ctrl); + _codec_ctrl = e100_codec_ctrl::make(_fifo_ctrl/*spi*/); const fs_path rx_codec_path = mb_path / "rx_codecs/A"; const fs_path tx_codec_path = mb_path / "tx_codecs/A"; _tree->create<std::string>(rx_codec_path / "name").set("ad9522"); @@ -232,24 +243,37 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ //////////////////////////////////////////////////////////////////// // Create the GPSDO control //////////////////////////////////////////////////////////////////// - try{ - _gps = gps_ctrl::make(e100_ctrl::make_gps_uart_iface(E100_UART_DEV_NODE)); - } - catch(std::exception &e){ - UHD_MSG(error) << "An error occurred making GPSDO control: " << e.what() << std::endl; - } - if (_gps.get() != NULL and _gps->gps_detected()){ - BOOST_FOREACH(const std::string &name, _gps->get_sensors()){ - _tree->create<sensor_value_t>(mb_path / "sensors" / name) - .publish(boost::bind(&gps_ctrl::get_sensor, _gps, name)); + static const fs::path GPSDO_VOLATILE_PATH("/media/ram/e100_internal_gpsdo.cache"); + if (not fs::exists(GPSDO_VOLATILE_PATH)) + { + UHD_MSG(status) << "Detecting internal GPSDO.... " << std::flush; + try{ + _gps = gps_ctrl::make(e100_ctrl::make_gps_uart_iface(E100_UART_DEV_NODE)); + } + catch(std::exception &e){ + UHD_MSG(error) << "An error occurred making GPSDO control: " << e.what() << std::endl; + } + if (_gps and _gps->gps_detected()) + { + UHD_MSG(status) << "found" << std::endl; + BOOST_FOREACH(const std::string &name, _gps->get_sensors()) + { + _tree->create<sensor_value_t>(mb_path / "sensors" / name) + .publish(boost::bind(&gps_ctrl::get_sensor, _gps, name)); + } + } + else + { + UHD_MSG(status) << "not found" << std::endl; + std::ofstream(GPSDO_VOLATILE_PATH.string().c_str(), std::ofstream::binary) << "42" << std::endl; } } //////////////////////////////////////////////////////////////////// // create frontend control objects //////////////////////////////////////////////////////////////////// - _rx_fe = rx_frontend_core_200::make(_fpga_ctrl, E100_REG_SR_ADDR(UE_SR_RX_FRONT)); - _tx_fe = tx_frontend_core_200::make(_fpga_ctrl, E100_REG_SR_ADDR(UE_SR_TX_FRONT)); + _rx_fe = rx_frontend_core_200::make(_fifo_ctrl, TOREG(SR_RX_FE)); + _tx_fe = tx_frontend_core_200::make(_fifo_ctrl, TOREG(SR_TX_FE)); _tree->create<subdev_spec_t>(mb_path / "rx_subdev_spec") .subscribe(boost::bind(&e100_impl::update_rx_subdev_spec, this, _1)); @@ -278,13 +302,17 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ //////////////////////////////////////////////////////////////////// // create rx dsp control objects //////////////////////////////////////////////////////////////////// - _rx_dsps.push_back(rx_dsp_core_200::make( - _fpga_ctrl, E100_REG_SR_ADDR(UE_SR_RX_DSP0), E100_REG_SR_ADDR(UE_SR_RX_CTRL0), E100_RX_SID_BASE + 0 - )); - _rx_dsps.push_back(rx_dsp_core_200::make( - _fpga_ctrl, E100_REG_SR_ADDR(UE_SR_RX_DSP1), E100_REG_SR_ADDR(UE_SR_RX_CTRL1), E100_RX_SID_BASE + 1 - )); - for (size_t dspno = 0; dspno < _rx_dsps.size(); dspno++){ + const size_t num_rx_dsps = _fifo_ctrl->peek32(REG_RB_NUM_RX_DSP); + for (size_t dspno = 0; dspno < num_rx_dsps; dspno++) + { + const size_t sr_off = dspno*32; + _rx_dsps.push_back(rx_dsp_core_200::make( + _fifo_ctrl, + TOREG(SR_RX_DSP0+sr_off), + TOREG(SR_RX_CTRL0+sr_off), + E100_RX_SID_BASE + dspno + )); + _rx_dsps[dspno]->set_link_rate(E100_RX_LINK_RATE_BPS); _tree->access<double>(mb_path / "tick_rate") .subscribe(boost::bind(&rx_dsp_core_200::set_tick_rate, _rx_dsps[dspno], _1)); @@ -307,7 +335,7 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ // create tx dsp control objects //////////////////////////////////////////////////////////////////// _tx_dsp = tx_dsp_core_200::make( - _fpga_ctrl, E100_REG_SR_ADDR(UE_SR_TX_DSP), E100_REG_SR_ADDR(UE_SR_TX_CTRL), E100_TX_ASYNC_SID + _fifo_ctrl, TOREG(SR_TX_DSP), TOREG(SR_TX_CTRL), E100_TX_ASYNC_SID ); _tx_dsp->set_link_rate(E100_TX_LINK_RATE_BPS); _tree->access<double>(mb_path / "tick_rate") @@ -327,12 +355,12 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ // create time control objects //////////////////////////////////////////////////////////////////// time64_core_200::readback_bases_type time64_rb_bases; - time64_rb_bases.rb_hi_now = E100_REG_RB_TIME_NOW_HI; - time64_rb_bases.rb_lo_now = E100_REG_RB_TIME_NOW_LO; - time64_rb_bases.rb_hi_pps = E100_REG_RB_TIME_PPS_HI; - time64_rb_bases.rb_lo_pps = E100_REG_RB_TIME_PPS_LO; + time64_rb_bases.rb_hi_now = REG_RB_TIME_NOW_HI; + time64_rb_bases.rb_lo_now = REG_RB_TIME_NOW_LO; + time64_rb_bases.rb_hi_pps = REG_RB_TIME_PPS_HI; + time64_rb_bases.rb_lo_pps = REG_RB_TIME_PPS_LO; _time64 = time64_core_200::make( - _fpga_ctrl, E100_REG_SR_ADDR(UE_SR_TIME64), time64_rb_bases + _fifo_ctrl, TOREG(SR_TIME64), time64_rb_bases ); _tree->access<double>(mb_path / "tick_rate") .subscribe(boost::bind(&time64_core_200::set_tick_rate, _time64, _1)); @@ -357,7 +385,7 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ //////////////////////////////////////////////////////////////////// // create user-defined control objects //////////////////////////////////////////////////////////////////// - _user = user_settings_core_200::make(_fpga_ctrl, E100_REG_SR_ADDR(UE_SR_USER_REGS)); + _user = user_settings_core_200::make(_fifo_ctrl, TOREG(SR_USER_REGS)); _tree->create<user_settings_core_200::user_reg_t>(mb_path / "user/regs") .subscribe(boost::bind(&user_settings_core_200::set_reg, _user, _1)); @@ -383,7 +411,7 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ .subscribe(boost::bind(&e100_impl::set_db_eeprom, this, "gdb", _1)); //create a new dboard interface and manager - _dboard_iface = make_e100_dboard_iface(_fpga_ctrl, _fpga_i2c_ctrl, _fpga_spi_ctrl, _clock_ctrl, _codec_ctrl); + _dboard_iface = make_e100_dboard_iface(_fifo_ctrl, _fpga_i2c_ctrl, _fifo_ctrl/*spi*/, _clock_ctrl, _codec_ctrl); _tree->create<dboard_iface::sptr>(mb_path / "dboards/A/iface").set(_dboard_iface); _dboard_manager = dboard_manager::make( rx_db_eeprom.id, tx_db_eeprom.id, gdb_eeprom.id, @@ -403,7 +431,11 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ } //initialize io handling - this->io_init(); + _recv_demuxer = recv_packet_demuxer::make(_data_transport, _rx_dsps.size(), E100_RX_SID_BASE); + + //allocate streamer weak ptrs containers + _rx_streamers.resize(_rx_dsps.size()); + _tx_streamers.resize(1/*known to be 1 dsp*/); //////////////////////////////////////////////////////////////////// // do some post-init tasks @@ -461,6 +493,19 @@ void e100_impl::set_db_eeprom(const std::string &type, const uhd::usrp::dboard_e } void e100_impl::update_clock_source(const std::string &source){ + + if (source == "pps_sync"){ + _clock_ctrl->use_external_ref(); + _fifo_ctrl->poke32(TOREG(SR_MISC+2), 1); + return; + } + if (source == "_pps_sync_"){ + _clock_ctrl->use_external_ref(); + _fifo_ctrl->poke32(TOREG(SR_MISC+2), 3); + return; + } + _fifo_ctrl->poke32(TOREG(SR_MISC+2), 0); + if (source == "auto") _clock_ctrl->use_auto_ref(); else if (source == "internal") _clock_ctrl->use_internal_ref(); else if (source == "external") _clock_ctrl->use_external_ref(); @@ -474,7 +519,7 @@ sensor_value_t e100_impl::get_ref_locked(void){ } void e100_impl::check_fpga_compat(void){ - const boost::uint32_t fpga_compat_num = _fpga_ctrl->peek32(E100_REG_RB_COMPAT); + const boost::uint32_t fpga_compat_num = _fifo_ctrl->peek32(REG_RB_COMPAT); boost::uint16_t fpga_major = fpga_compat_num >> 16, fpga_minor = fpga_compat_num & 0xffff; if (fpga_major == 0){ //old version scheme fpga_major = fpga_minor; diff --git a/host/lib/usrp/e100/e100_impl.hpp b/host/lib/usrp/e100/e100_impl.hpp index 381c085e0..6f64d4b80 100644 --- a/host/lib/usrp/e100/e100_impl.hpp +++ b/host/lib/usrp/e100/e100_impl.hpp @@ -18,17 +18,17 @@ #include "e100_ctrl.hpp" #include "clock_ctrl.hpp" #include "codec_ctrl.hpp" -#include "spi_core_100.hpp" -#include "i2c_core_100.hpp" +#include "i2c_core_200.hpp" #include "rx_frontend_core_200.hpp" #include "tx_frontend_core_200.hpp" #include "rx_dsp_core_200.hpp" #include "tx_dsp_core_200.hpp" #include "time64_core_200.hpp" +#include "fifo_ctrl_excelsior.hpp" #include "user_settings_core_200.hpp" +#include "recv_packet_demuxer.hpp" #include <uhd/device.hpp> #include <uhd/property_tree.hpp> -#include <uhd/utils/pimpl.hpp> #include <uhd/usrp/subdev_spec.hpp> #include <uhd/usrp/dboard_eeprom.hpp> #include <uhd/usrp/mboard_eeprom.hpp> @@ -49,9 +49,10 @@ static const double E100_RX_LINK_RATE_BPS = 166e6/3/2*2; static const double E100_TX_LINK_RATE_BPS = 166e6/3/1*2; static const std::string E100_I2C_DEV_NODE = "/dev/i2c-3"; static const std::string E100_UART_DEV_NODE = "/dev/ttyO0"; -static const boost::uint16_t E100_FPGA_COMPAT_NUM = 10; -static const boost::uint32_t E100_RX_SID_BASE = 2; -static const boost::uint32_t E100_TX_ASYNC_SID = 1; +static const boost::uint16_t E100_FPGA_COMPAT_NUM = 11; +static const boost::uint32_t E100_RX_SID_BASE = 30; +static const boost::uint32_t E100_TX_ASYNC_SID = 10; +static const boost::uint32_t E100_CTRL_MSG_SID = 20; static const double E100_DEFAULT_CLOCK_RATE = 64e6; static const std::string E100_EEPROM_MAP_KEY = "E100"; @@ -87,8 +88,8 @@ private: uhd::property_tree::sptr _tree; //controllers - spi_core_100::sptr _fpga_spi_ctrl; - i2c_core_100::sptr _fpga_i2c_ctrl; + fifo_ctrl_excelsior::sptr _fifo_ctrl; + i2c_core_200::sptr _fpga_i2c_ctrl; rx_frontend_core_200::sptr _rx_fe; tx_frontend_core_200::sptr _tx_fe; std::vector<rx_dsp_core_200::sptr> _rx_dsps; @@ -104,15 +105,12 @@ private: //transports uhd::transport::zero_copy_if::sptr _data_transport; + uhd::usrp::recv_packet_demuxer::sptr _recv_demuxer; //dboard stuff uhd::usrp::dboard_manager::sptr _dboard_manager; uhd::usrp::dboard_iface::sptr _dboard_iface; - //handle io stuff - UHD_PIMPL_DECL(io_impl) _io_impl; - void io_init(void); - //device properties interface uhd::property_tree::sptr get_tree(void) const{ return _tree; diff --git a/host/lib/usrp/e100/e100_regs.hpp b/host/lib/usrp/e100/e100_regs.hpp index 75be2cfbe..654163dce 100644 --- a/host/lib/usrp/e100/e100_regs.hpp +++ b/host/lib/usrp/e100/e100_regs.hpp @@ -15,55 +15,45 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -//////////////////////////////////////////////////////////////// -// -// Memory map for embedded wishbone bus -// -//////////////////////////////////////////////////////////////// - -// All addresses are byte addresses. All accesses are word (16-bit) accesses. -// This means that address bit 0 is usually 0. -// There are 11 bits of address for the control. - #ifndef INCLUDED_E100_REGS_HPP #define INCLUDED_E100_REGS_HPP -///////////////////////////////////////////////////// -// Slave pointers +#include <boost/cstdint.hpp> -#define E100_REG_SLAVE(n) ((n)<<7) +#define TOREG(x) ((x)*4) -///////////////////////////////////////////////////// -// Slave 0 -- Misc Regs +#define localparam static const int -#define E100_REG_MISC_BASE E100_REG_SLAVE(0) +localparam SR_MISC = 0; // 5 +localparam SR_USER_REGS = 5; // 2 -#define E100_REG_MISC_LED E100_REG_MISC_BASE + 0 -#define E100_REG_MISC_SW E100_REG_MISC_BASE + 2 -#define E100_REG_MISC_CGEN_CTRL E100_REG_MISC_BASE + 4 -#define E100_REG_MISC_CGEN_ST E100_REG_MISC_BASE + 6 -#define E100_REG_MISC_TEST E100_REG_MISC_BASE + 8 -#define E100_REG_MISC_RX_LEN E100_REG_MISC_BASE + 10 -#define E100_REG_MISC_TX_LEN E100_REG_MISC_BASE + 12 -#define E100_REG_MISC_XFER_RATE E100_REG_MISC_BASE + 14 +localparam SR_TX_CTRL = 32; // 6 +localparam SR_TX_DSP = 40; // 5 +localparam SR_TX_FE = 48; // 5 -///////////////////////////////////////////////////// -// Slave 1 -- UART -// CLKDIV is 16 bits, others are only 8 +localparam SR_RX_CTRL0 = 96; // 9 +localparam SR_RX_DSP0 = 106; // 7 +localparam SR_RX_FE = 114; // 5 -#define E100_REG_UART_BASE E100_REG_SLAVE(1) +localparam SR_RX_CTRL1 = 128; // 9 +localparam SR_RX_DSP1 = 138; // 7 -#define E100_REG_UART_CLKDIV E100_REG_UART_BASE + 0 -#define E100_REG_UART_TXLEVEL E100_REG_UART_BASE + 2 -#define E100_REG_UART_RXLEVEL E100_REG_UART_BASE + 4 -#define E100_REG_UART_TXCHAR E100_REG_UART_BASE + 6 -#define E100_REG_UART_RXCHAR E100_REG_UART_BASE + 8 +localparam SR_TIME64 = 192; // 6 +localparam SR_SPI = 208; // 3 +localparam SR_I2C = 216; // 1 +localparam SR_GPIO = 224; // 5 -///////////////////////////////////////////////////// -// Slave 2 -- SPI Core -//these are 32-bit registers mapped onto the 16-bit Wishbone bus. -//Using peek32/poke32 should allow transparent use of these registers. -#define E100_REG_SPI_BASE E100_REG_SLAVE(2) +#define REG_RB_TIME_NOW_HI TOREG(10) +#define REG_RB_TIME_NOW_LO TOREG(11) +#define REG_RB_TIME_PPS_HI TOREG(14) +#define REG_RB_TIME_PPS_LO TOREG(15) +#define REG_RB_SPI TOREG(0) +#define REG_RB_COMPAT TOREG(1) +#define REG_RB_GPIO TOREG(3) +#define REG_RB_I2C TOREG(2) +#define REG_RB_CONFIG0 TOREG(4) +#define REG_RB_CONFIG1 TOREG(5) +#define REG_RB_NUM_RX_DSP TOREG(6) //spi slave constants #define UE_SPI_SS_AD9522 (1 << 3) @@ -71,67 +61,5 @@ #define UE_SPI_SS_TX_DB (1 << 1) #define UE_SPI_SS_RX_DB (1 << 0) -//////////////////////////////////////////////// -// Slave 3 -- I2C Core - -#define E100_REG_I2C_BASE E100_REG_SLAVE(3) - -//////////////////////////////////////////////// -// Slave 5 -- Error messages buffer - -#define E100_REG_ERR_BUFF E100_REG_SLAVE(5) - -/////////////////////////////////////////////////// -// Slave 7 -- Readback Mux 32 - -#define E100_REG_RB_MUX_32_BASE E100_REG_SLAVE(7) - -#define E100_REG_RB_TIME_NOW_HI E100_REG_RB_MUX_32_BASE + 0 -#define E100_REG_RB_TIME_NOW_LO E100_REG_RB_MUX_32_BASE + 4 -#define E100_REG_RB_TIME_PPS_HI E100_REG_RB_MUX_32_BASE + 8 -#define E100_REG_RB_TIME_PPS_LO E100_REG_RB_MUX_32_BASE + 12 -#define E100_REG_RB_MISC_TEST32 E100_REG_RB_MUX_32_BASE + 16 -#define E100_REG_RB_ERR_STATUS E100_REG_RB_MUX_32_BASE + 20 -#define E100_REG_RB_COMPAT E100_REG_RB_MUX_32_BASE + 24 -#define E100_REG_RB_GPIO E100_REG_RB_MUX_32_BASE + 28 - -//////////////////////////////////////////////////// -// Slave 8 -- Settings Bus -// -// Output-only, no readback, 64 registers total -// Each register must be written 64 bits at a time -// First the address xxx_xx00 and then xxx_xx10 - -// 64 total regs in address space -#define UE_SR_RX_CTRL0 0 // 9 regs (+0 to +8) -#define UE_SR_RX_DSP0 10 // 4 regs (+0 to +3) -#define UE_SR_RX_CTRL1 16 // 9 regs (+0 to +8) -#define UE_SR_RX_DSP1 26 // 4 regs (+0 to +3) -#define UE_SR_ERR_CTRL 30 // 1 reg -#define UE_SR_TX_CTRL 32 // 4 regs (+0 to +3) -#define UE_SR_TX_DSP 38 // 3 regs (+0 to +2) - -#define UE_SR_TIME64 42 // 6 regs (+0 to +5) -#define UE_SR_RX_FRONT 48 // 5 regs (+0 to +4) -#define UE_SR_TX_FRONT 54 // 5 regs (+0 to +4) - -#define UE_SR_REG_TEST32 60 // 1 reg -#define UE_SR_CLEAR_FIFO 61 // 1 reg -#define UE_SR_GLOBAL_RESET 63 // 1 reg -#define UE_SR_USER_REGS 64 // 2 regs - -#define UE_SR_GPIO 128 - -#define E100_REG_SR_ADDR(n) (E100_REG_SLAVE(8) + (4*(n))) - -#define E100_REG_SR_MISC_TEST32 E100_REG_SR_ADDR(UE_SR_REG_TEST32) -#define E100_REG_SR_ERR_CTRL E100_REG_SR_ADDR(UE_SR_ERR_CTRL) - -///////////////////////////////////////////////// -// Magic reset regs -//////////////////////////////////////////////// -#define E100_REG_CLEAR_FIFO E100_REG_SR_ADDR(UE_SR_CLEAR_FIFO) -#define E100_REG_GLOBAL_RESET E100_REG_SR_ADDR(UE_SR_GLOBAL_RESET) - -#endif +#endif /*INCLUDED_E100_REGS_HPP*/ diff --git a/host/lib/usrp/e100/include/linux/usrp_e.h b/host/lib/usrp/e100/include/linux/usrp_e.h index 37e9ee31a..f0512a40c 100644 --- a/host/lib/usrp/e100/include/linux/usrp_e.h +++ b/host/lib/usrp/e100/include/linux/usrp_e.h @@ -1,6 +1,6 @@ /* - * Copyright (C) 2010 Ettus Research, LLC + * Copyright (C) 2010-2012 Ettus Research, LLC * * Written by Philip Balister <philip@opensdr.com> * @@ -36,7 +36,7 @@ struct usrp_e_ctl32 { #define USRP_E_GET_RB_INFO _IOR(USRP_E_IOC_MAGIC, 0x27, struct usrp_e_ring_buffer_size_t) #define USRP_E_GET_COMPAT_NUMBER _IO(USRP_E_IOC_MAGIC, 0x28) -#define USRP_E_COMPAT_NUMBER 3 +#define USRP_E_COMPAT_NUMBER 4 /* Flag defines */ #define RB_USER (1<<0) diff --git a/host/lib/usrp/e100/io_impl.cpp b/host/lib/usrp/e100/io_impl.cpp index 332fe76ae..4d521e222 100644 --- a/host/lib/usrp/e100/io_impl.cpp +++ b/host/lib/usrp/e100/io_impl.cpp @@ -15,27 +15,16 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -#include "recv_packet_demuxer.hpp" #include "validate_subdev_spec.hpp" #include "async_packet_handler.hpp" #include "../../transport/super_recv_packet_handler.hpp" #include "../../transport/super_send_packet_handler.hpp" -#include <linux/usrp_e.h> //ioctl structures and constants #include "e100_impl.hpp" -#include "e100_regs.hpp" #include <uhd/utils/msg.hpp> #include <uhd/utils/log.hpp> #include <uhd/utils/tasks.hpp> -#include <uhd/utils/thread_priority.hpp> -#include <uhd/transport/bounded_buffer.hpp> #include <boost/bind.hpp> #include <boost/format.hpp> -#include <boost/bind.hpp> -#include <boost/thread/thread.hpp> -#include <poll.h> //poll -#include <fcntl.h> //open, close -#include <sstream> -#include <fstream> #include <boost/make_shared.hpp> using namespace uhd; @@ -44,134 +33,7 @@ using namespace uhd::transport; static const size_t vrt_send_header_offset_words32 = 1; -/*********************************************************************** - * io impl details (internal to this file) - * - pirate crew of 1 - * - bounded buffer - * - thread loop - * - vrt packet handler states - **********************************************************************/ -struct e100_impl::io_impl{ - io_impl(void): - false_alarm(0), async_msg_fifo(1000/*messages deep*/) - { /* NOP */ } - - double tick_rate; //set by update tick rate method - e100_ctrl::sptr iface; //so handle irq can peek and poke - void handle_irq(void); - size_t false_alarm; - //The data transport is listed first so that it is deconstructed last, - //which is after the states and booty which may hold managed buffers. - recv_packet_demuxer::sptr demuxer; - - //a pirate's life is the life for me! - void recv_pirate_loop( - spi_iface::sptr //keep a sptr to iface which shares gpio147 - ){ - //open the GPIO and set it up for an IRQ - std::ofstream edge_file("/sys/class/gpio/gpio147/edge"); - edge_file << "rising" << std::endl << std::flush; - edge_file.close(); - int fd = ::open("/sys/class/gpio/gpio147/value", O_RDONLY); - if (fd < 0) UHD_MSG(error) << "Unable to open GPIO for IRQ\n"; - - while (not boost::this_thread::interruption_requested()){ - pollfd pfd; - pfd.fd = fd; - pfd.events = POLLPRI | POLLERR; - ssize_t ret = ::poll(&pfd, 1, 100/*ms*/); - if (ret > 0) this->handle_irq(); - } - - //cleanup before thread exit - ::close(fd); - } - bounded_buffer<async_metadata_t> async_msg_fifo; - task::sptr pirate_task; -}; - -void e100_impl::io_impl::handle_irq(void){ - //check the status of the async msg buffer - const boost::uint32_t status = iface->peek32(E100_REG_RB_ERR_STATUS); - if ((status & 0x3) == 0){ //not done or error - //This could be a false-alarm because spi readback is mixed in. - //So we just sleep for a bit rather than interrupt continuously. - if (false_alarm++ > 3) boost::this_thread::sleep(boost::posix_time::milliseconds(1)); - return; - } - false_alarm = 0; //its a real message, reset the count... - //std::cout << boost::format("status: 0x%x") % status << std::endl; - - //load the data struct and call the ioctl - usrp_e_ctl32 data; - data.offset = E100_REG_ERR_BUFF; - data.count = status >> 16; - iface->ioctl(USRP_E_READ_CTL32, &data); - //for (size_t i = 0; i < data.count; i++){ - //data.buf[i] = iface->peek32(E100_REG_ERR_BUFF + i*sizeof(boost::uint32_t)); - //std::cout << boost::format(" buff[%u] = 0x%08x\n") % i % data.buf[i]; - //} - - //unpack the vrt header and process below... - vrt::if_packet_info_t if_packet_info; - if_packet_info.num_packet_words32 = data.count; - try{vrt::if_hdr_unpack_le(data.buf, if_packet_info);} - catch(const std::exception &e){ - UHD_MSG(error) << "Error unpacking vrt header:\n" << e.what() << std::endl; - goto prepare; - } - - //handle a tx async report message - if (if_packet_info.sid == E100_TX_ASYNC_SID and if_packet_info.packet_type != vrt::if_packet_info_t::PACKET_TYPE_DATA){ - - //fill in the async metadata - async_metadata_t metadata; - load_metadata_from_buff(uhd::wtohx<boost::uint32_t>, metadata, if_packet_info, data.buf, tick_rate); - - //push the message onto the queue - async_msg_fifo.push_with_pop_on_full(metadata); - - //print some fastpath messages - standard_async_msg_prints(metadata); - } - - //prepare for the next round - prepare: - iface->poke32(E100_REG_SR_ERR_CTRL, 1 << 0); //clear - while ((iface->peek32(E100_REG_RB_ERR_STATUS) & (1 << 2)) == 0){} //wait for idle - iface->poke32(E100_REG_SR_ERR_CTRL, 1 << 1); //start -} - -/*********************************************************************** - * Helper Functions - **********************************************************************/ -void e100_impl::io_init(void){ - - //create new io impl - _io_impl = UHD_PIMPL_MAKE(io_impl, ()); - _io_impl->demuxer = recv_packet_demuxer::make(_data_transport, _rx_dsps.size(), E100_RX_SID_BASE); - _io_impl->iface = _fpga_ctrl; - - //clear fifo state machines - _fpga_ctrl->poke32(E100_REG_CLEAR_FIFO, 0); - - //allocate streamer weak ptrs containers - _rx_streamers.resize(_rx_dsps.size()); - _tx_streamers.resize(1/*known to be 1 dsp*/); - - //prepare the async msg buffer for incoming messages - _fpga_ctrl->poke32(E100_REG_SR_ERR_CTRL, 1 << 0); //clear - while ((_fpga_ctrl->peek32(E100_REG_RB_ERR_STATUS) & (1 << 2)) == 0){} //wait for idle - _fpga_ctrl->poke32(E100_REG_SR_ERR_CTRL, 1 << 1); //start - - //spawn a pirate, yarrr! - _io_impl->pirate_task = task::make(boost::bind( - &e100_impl::io_impl::recv_pirate_loop, _io_impl.get(), _aux_spi_iface - )); -} - void e100_impl::update_tick_rate(const double rate){ - _io_impl->tick_rate = rate; //update the tick rate on all existing streamers -> thread safe for (size_t i = 0; i < _rx_streamers.size(); i++){ @@ -254,8 +116,7 @@ void e100_impl::update_tx_subdev_spec(const uhd::usrp::subdev_spec_t &spec){ bool e100_impl::recv_async_msg( async_metadata_t &async_metadata, double timeout ){ - boost::this_thread::disable_interruption di; //disable because the wait can throw - return _io_impl->async_msg_fifo.pop_with_timed_wait(async_metadata, timeout); + return _fifo_ctrl->pop_async_msg(async_metadata, timeout); } /*********************************************************************** @@ -300,7 +161,7 @@ rx_streamer::sptr e100_impl::get_rx_stream(const uhd::stream_args_t &args_){ _rx_dsps[dsp]->set_nsamps_per_packet(spp); //seems to be a good place to set this _rx_dsps[dsp]->setup(args); my_streamer->set_xport_chan_get_buff(chan_i, boost::bind( - &recv_packet_demuxer::get_recv_buff, _io_impl->demuxer, dsp, _1 + &recv_packet_demuxer::get_recv_buff, _recv_demuxer, dsp, _1 ), true /*flush*/); my_streamer->set_overflow_handler(chan_i, boost::bind( &rx_dsp_core_200::handle_overflow, _rx_dsps[dsp] diff --git a/host/usrp_e_utils/CMakeLists.txt b/host/usrp_e_utils/CMakeLists.txt deleted file mode 100644 index 0d6763174..000000000 --- a/host/usrp_e_utils/CMakeLists.txt +++ /dev/null @@ -1,42 +0,0 @@ -# -# Copyright 2011 Ettus Research LLC -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -######################################################################## -# USRP embedded utilities that get installed into the share path -######################################################################## -LIBUHD_REGISTER_COMPONENT("USRP-E Utils" ENABLE_USRP_E_UTILS OFF "LINUX" OFF) - -IF(ENABLE_USRP_E_UTILS) - ENABLE_LANGUAGE(C) - INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}) - INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/lib/usrp/e100) - INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/lib/usrp/e100/include) - - SET(usrp_e_utils_sources - usrp-e-loopback.cpp - usrp-e-wb-test.cpp - ) - - #for each source: build an executable and install - FOREACH(util_source ${usrp_e_utils_sources}) - GET_FILENAME_COMPONENT(util_name ${util_source} NAME_WE) - ADD_EXECUTABLE(${util_name} ${util_source}) - TARGET_LINK_LIBRARIES(${util_name} ${Boost_LIBRARIES}) - INSTALL(TARGETS ${util_name} RUNTIME DESTINATION ${PKG_LIB_DIR}/usrp_e_utils) - ENDFOREACH(util_source) - -ENDIF(ENABLE_USRP_E_UTILS) diff --git a/host/usrp_e_utils/common.hpp b/host/usrp_e_utils/common.hpp deleted file mode 100644 index 989aecd06..000000000 --- a/host/usrp_e_utils/common.hpp +++ /dev/null @@ -1,64 +0,0 @@ -// -// Copyright 2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#include <sys/ioctl.h> //ioctl -#include <fcntl.h> //open, close - -#include <linux/usrp_e.h> -#include "e100_regs.hpp" - -static int fp; - -static inline int peek16(int reg){ - int ret; - struct usrp_e_ctl16 d; - - d.offset = reg; - d.count = 1; - ret = ioctl(fp, USRP_E_READ_CTL16, &d); - return d.buf[0]; -} - -static inline void poke16(int reg, int val){ - int ret; - struct usrp_e_ctl16 d; - - d.offset = reg; - d.count = 1; - d.buf[0] = val; - ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); -} - -static inline int peek32(int reg){ - int ret; - struct usrp_e_ctl32 d; - - d.offset = reg; - d.count = 1; - ret = ioctl(fp, USRP_E_READ_CTL32, &d); - return d.buf[0]; -} - -static inline void poke32(int reg, int val){ - int ret; - struct usrp_e_ctl32 d; - - d.offset = reg; - d.count = 1; - d.buf[0] = val; - ret = ioctl(fp, USRP_E_WRITE_CTL32, &d); -} diff --git a/host/usrp_e_utils/usrp-e-loopback.cpp b/host/usrp_e_utils/usrp-e-loopback.cpp deleted file mode 100644 index d4220adc3..000000000 --- a/host/usrp_e_utils/usrp-e-loopback.cpp +++ /dev/null @@ -1,298 +0,0 @@ -// -// Copyright 2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#include "common.hpp" -#include <cstdlib> -#include <cstdio> -#include <cstring> -#include <ctime> -#include <iostream> -#include <boost/thread/thread.hpp> -#include <boost/format.hpp> -#include <boost/cstdint.hpp> -#include <sys/mman.h> //mmap -#include <unistd.h> //getpagesize -#include <poll.h> //poll - -static const size_t bytes_per_frame = 2048; - -static const int poll_timeout_ms = 100; - -struct loopback_pkt_hdr_type{ - boost::uint32_t words32; - boost::uint32_t checksum; - boost::uint64_t seq_num; -}; - -struct loopback_pkt_type{ - loopback_pkt_hdr_type hdr; - boost::uint32_t data[(bytes_per_frame-sizeof(loopback_pkt_hdr_type))/sizeof(boost::uint32_t)]; -}; - -static ring_buffer_info (*recv_info)[]; -static ring_buffer_info (*send_info)[]; -static loopback_pkt_type (*recv_buff)[]; -static loopback_pkt_type (*send_buff)[]; - -static struct usrp_e_ring_buffer_size_t rb_size; - -static bool running = true; - -static boost::uint64_t seq_errors = 0; -static boost::uint64_t checksum_errors = 0; -static boost::uint64_t sent_words32 = 0; -static boost::uint64_t recvd_words32 = 0; - -static inline void print_pkt(const loopback_pkt_type &pkt){ - std::cout << std::endl; - std::cout << "pkt.hdr.words32 " << pkt.hdr.words32 << std::endl; - std::cout << "pkt.hdr.checksum " << pkt.hdr.checksum << std::endl; - std::cout << "pkt.hdr.seq_num " << pkt.hdr.seq_num << std::endl; -} - -boost::uint32_t my_checksum(void *buff, size_t size32){ - boost::uint32_t x = 0; - for (size_t i = 0; i < size32; i++){ - x += reinterpret_cast<boost::uint32_t *>(buff)[i]; - x ^= reinterpret_cast<boost::uint32_t *>(buff)[i]; - } - return x; -} - -/*********************************************************************** - * Read thread - recv frames and verify checksum - **********************************************************************/ -static void read_thread(void){ - std::cout << "start read thread... " << std::endl; - - boost::uint64_t seq_num = 0; - size_t index = 0; - - while (running){ - - loopback_pkt_type &pkt = (*recv_buff)[index]; - ring_buffer_info &info = (*recv_info)[index]; - - //wait for frame available - if (not (info.flags & RB_USER)){ - pollfd pfd; - pfd.fd = fp; - pfd.events = POLLIN; - if (poll(&pfd, 1, poll_timeout_ms) <= 0){ - std::cout << "Read poll timeout, exiting read thread!" << std::endl; - running = false; - return; - } - } - info.flags = RB_USER_PROCESS; - - //print_pkt(pkt); - - //handle checksum - const boost::uint32_t expected_checksum = pkt.hdr.checksum; - pkt.hdr.checksum = 0; //set to zero for calculation - const boost::uint32_t actual_checksum = my_checksum(&pkt, pkt.hdr.words32); - if (expected_checksum != actual_checksum){ - checksum_errors++; - std::cerr << "C"; - } - else{ - recvd_words32 += pkt.hdr.words32; - } - - //handle sequence - if (seq_num != pkt.hdr.seq_num){ - seq_errors++; - std::cerr << "S"; - } - seq_num = pkt.hdr.seq_num+1; - - //release the packet - info.flags = RB_KERNEL; - - //increment index and wrap around to zero - index++; - if (index == size_t(rb_size.num_rx_frames)) index = 0; - } - -} - -/*********************************************************************** - * Write thread - send frames and calculate checksum - **********************************************************************/ -static void write_thread(const size_t num_words32){ - std::cout << "start write thread... " << std::endl; - - srandom(std::time(NULL)); - - boost::uint64_t seq_num = 0; - size_t index = 0; - - //write into tmp and memcopy into pkt to avoid cache issues - loopback_pkt_type pkt_tmp; - - while (running){ - - ring_buffer_info &info = (*send_info)[index]; - - //wait for frame available - if (not (info.flags & RB_KERNEL)){ - pollfd pfd; - pfd.fd = fp; - pfd.events = POLLOUT; - if (poll(&pfd, 1, poll_timeout_ms) <= 0){ - std::cout << "Write poll timeout, exiting write thread!" << std::endl; - running = false; - return; - } - } - - //fill packet header and body - const boost::uint32_t seed = random(); - pkt_tmp.hdr.words32 = sizeof(pkt_tmp.hdr)/sizeof(boost::uint32_t) + num_words32; - pkt_tmp.hdr.checksum = 0; //set to zero for checksum() - pkt_tmp.hdr.seq_num = seq_num++; - for (size_t i = 0; i < num_words32; i++) pkt_tmp.data[i] = seed + i; - pkt_tmp.hdr.checksum = my_checksum(&pkt_tmp, pkt_tmp.hdr.words32); - sent_words32 += pkt_tmp.hdr.words32; - - loopback_pkt_type &pkt = (*send_buff)[index]; - std::memcpy(&pkt, &pkt_tmp, pkt_tmp.hdr.words32*sizeof(boost::uint32_t)); - - //print_pkt(pkt); - - //commit the packet - info.len = pkt_tmp.hdr.words32*sizeof(boost::uint32_t); - info.flags = RB_USER; - ::write(fp, NULL, 0); - - //increment index and wrap around to zero - index++; - if (index == size_t(rb_size.num_tx_frames)) index = 0; - } -} - -/*********************************************************************** - * Setup memory mapped ring buffer - **********************************************************************/ -static void setup_ring(void){ - std::cout << "setup memory mapped ring buffer... " << std::flush; - - //calculate various sizes - const size_t page_size = getpagesize(); - ioctl(fp, USRP_E_GET_RB_INFO, &rb_size); - const size_t map_size = (rb_size.num_pages_rx_flags + rb_size.num_pages_tx_flags) * page_size + - (rb_size.num_rx_frames + rb_size.num_tx_frames) * (page_size >> 1); - - //call into memory map - void *mem = ::mmap(0, map_size, PROT_READ|PROT_WRITE, MAP_SHARED, fp, 0); - if (mem == MAP_FAILED) { - std::cerr << "mmap failed" << std::endl; - std::exit(-1); - } - - //calculate the memory offsets for info and buffers - const size_t recv_info_off = 0; - const size_t recv_buff_off = recv_info_off + (rb_size.num_pages_rx_flags * page_size); - const size_t send_info_off = recv_buff_off + (rb_size.num_rx_frames * page_size/2); - const size_t send_buff_off = send_info_off + (rb_size.num_pages_tx_flags * page_size); - - //set the internal pointers for info and buffers - typedef ring_buffer_info (*rbi_pta)[]; - typedef loopback_pkt_type (*pkt_pta)[]; - char *rb_ptr = reinterpret_cast<char *>(mem); - recv_info = reinterpret_cast<rbi_pta>(rb_ptr + recv_info_off); - recv_buff = reinterpret_cast<pkt_pta>(rb_ptr + recv_buff_off); - send_info = reinterpret_cast<rbi_pta>(rb_ptr + send_info_off); - send_buff = reinterpret_cast<pkt_pta>(rb_ptr + send_buff_off); - - std::cout << "done" << std::endl; -} - -/*********************************************************************** - * Main - **********************************************************************/ -#include <boost/program_options.hpp> - -int main(int argc, char *argv[]){ - - //variables to be set by po - double duration; - size_t nwords; - - //setup the program options - namespace po = boost::program_options; - po::options_description desc("Allowed options"); - desc.add_options() - ("help", "help message") - ("duration", po::value<double>(&duration)->default_value(10), "number of seconds to run loopback") - ("nwords", po::value<size_t>(&nwords)->default_value(400), "number of words32 to send per packet") - ; - po::variables_map vm; - po::store(po::parse_command_line(argc, argv, desc), vm); - po::notify(vm); - - //print the help message - if (vm.count("help")){ - std::cout << boost::format("UHD USRP-E-Loopback %s") % desc << std::endl; - return ~0; - } - - if ((fp = ::open("/dev/usrp_e0", O_RDWR)) < 0){ - std::cerr << "Open failed" << std::endl; - return -1; - } - - //set the mode to loopback - poke16(E100_REG_MISC_XFER_RATE, (1<<8) | (1<<9)); - - //clear FIFO state in FPGA and kernel - poke32(E100_REG_CLEAR_FIFO, 0); - ::close(fp); - if ((fp = ::open("/dev/usrp_e0", O_RDWR)) < 0){ - std::cerr << "Open failed" << std::endl; - return -1; - } - - //setup the ring buffer - setup_ring(); - - //spawn threads - boost::thread_group tg; - tg.create_thread(boost::bind(&read_thread)); - tg.create_thread(boost::bind(&write_thread, nwords)); - - const boost::system_time start_time = boost::get_system_time(); - const boost::system_time finish_time = start_time + boost::posix_time::milliseconds(long(duration*1000)); - while (boost::get_system_time() < finish_time){ - boost::this_thread::sleep(boost::posix_time::milliseconds(1000)); - std::cerr << "."; - } - running = false; - tg.join_all(); - - std::cout << std::endl; - std::cout << "seq_errors " << seq_errors << std::endl; - std::cout << "checksum_errors " << checksum_errors << std::endl; - std::cout << "sent_words32 " << sent_words32 << std::endl; - std::cout << "recvd_words32 " << recvd_words32 << std::endl; - std::cout << "approx send rate " << (sent_words32/duration)/1e6 << "Msps" << std::endl; - std::cout << "approx recv rate " << (recvd_words32/duration)/1e6 << "Msps" << std::endl; - - ::close(fp); - return seq_errors + checksum_errors; -} diff --git a/host/usrp_e_utils/usrp-e-wb-test.cpp b/host/usrp_e_utils/usrp-e-wb-test.cpp deleted file mode 100644 index 2b793dc06..000000000 --- a/host/usrp_e_utils/usrp-e-wb-test.cpp +++ /dev/null @@ -1,68 +0,0 @@ -// -// Copyright 2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#include "common.hpp" -#include <cstdlib> -#include <cstdio> -#include <ctime> -#include <iostream> - -static const size_t num_test_iters = 10000000; - -int main(int, char *[]){ - - srandom(time(NULL)); //seed random() - - if ((fp = ::open("/dev/usrp_e0", O_RDWR)) < 0){ - std::cerr << "Open failed" << std::endl; - return -1; - } - - size_t num_pass = 0, num_fail = 0; - for (size_t i = 0; i < num_test_iters; i++){ - if(i%1000000 == 0) { - std::cout << "num pass: " << num_pass; - std::cout << "\tnum fail: " << num_fail << std::endl; - } - //make random values - int random_test32 = ::random(); - int random_test16 = ::random() & 0xffff; - //int random_secs = ::random(); - - //set a bunch of registers - poke16(E100_REG_MISC_TEST, random_test16); - poke32(E100_REG_SR_MISC_TEST32, random_test32); - //poke32(E100_REG_TIME64_TICKS, 0); - //poke32(E100_REG_TIME64_IMM, 1); //immediate - //poke32(E100_REG_TIME64_SECS, random_secs); - - //read a bunch of registers - if ( - (peek16(E100_REG_MISC_TEST) == random_test16) and - (peek32(E100_REG_RB_MISC_TEST32) == random_test32) and -// (peek32(E100_REG_RB_TIME_NOW_SECS) == random_secs) and -// (peek32(E100_REG_RB_TIME_NOW_TICKS) < 1000000) and - true) num_pass++; - else num_fail++; - } - - std::cout << "num pass: " << num_pass << std::endl; - std::cout << "num fail: " << num_fail << std::endl; - - ::close(fp); - return 0; -} |