summaryrefslogtreecommitdiffstats
path: root/host/utils
diff options
context:
space:
mode:
Diffstat (limited to 'host/utils')
-rw-r--r--host/utils/uhd_cal_rx_iq_balance.cpp18
-rw-r--r--host/utils/uhd_cal_tx_dc_offset.cpp16
-rw-r--r--host/utils/uhd_cal_tx_iq_balance.cpp19
-rw-r--r--host/utils/usrp_cal_utils.hpp31
4 files changed, 66 insertions, 18 deletions
diff --git a/host/utils/uhd_cal_rx_iq_balance.cpp b/host/utils/uhd_cal_rx_iq_balance.cpp
index 5fb494114..551da7544 100644
--- a/host/utils/uhd_cal_rx_iq_balance.cpp
+++ b/host/utils/uhd_cal_rx_iq_balance.cpp
@@ -20,6 +20,7 @@
#include <uhd/utils/safe_main.hpp>
#include <uhd/utils/paths.hpp>
#include <uhd/utils/algorithm.hpp>
+#include <uhd/utils/msg.hpp>
#include <uhd/usrp/multi_usrp.hpp>
#include <boost/program_options.hpp>
#include <boost/format.hpp>
@@ -93,7 +94,7 @@ static double tune_rx_and_tx(uhd::usrp::multi_usrp::sptr usrp, const double rx_l
* Main
**********************************************************************/
int UHD_SAFE_MAIN(int argc, char *argv[]){
- std::string args;
+ std::string args, subdev, serial;
double tx_wave_ampl, tx_offset;
double freq_start, freq_stop, freq_step;
size_t nsamps;
@@ -102,7 +103,8 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
desc.add_options()
("help", "help message")
("verbose", "enable some verbose")
- ("args", po::value<std::string>(&args)->default_value(""), "device address args [default = \"\"]")
+ ("args", po::value<std::string>(&args)->default_value(""), "Device address args [default = \"\"]")
+ ("subdev", po::value<std::string>(&subdev), "Subdevice specification (default: first subdevice, often 'A')")
("tx_wave_ampl", po::value<double>(&tx_wave_ampl)->default_value(0.7), "Transmit wave amplitude in counts")
("tx_offset", po::value<double>(&tx_offset)->default_value(.9344e6), "TX LO offset from the RX LO in Hz")
("freq_start", po::value<double>(&freq_start), "Frequency start in Hz (do not specify for default)")
@@ -129,6 +131,15 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl;
uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args);
+ // Configure subdev
+ if (vm.count("subdev")) {
+ usrp->set_tx_subdev_spec(subdev);
+ usrp->set_rx_subdev_spec(subdev);
+ }
+ UHD_MSG(status) << "Running calibration for " << usrp->get_tx_subdev_name(0) << std::endl;
+ serial = get_serial(usrp, "tx");
+ UHD_MSG(status) << "Daughterboard serial: " << serial << std::endl;
+
//set the antennas to cal
if (not uhd::has(usrp->get_rx_antennas(), "CAL") or not uhd::has(usrp->get_tx_antennas(), "CAL")){
throw std::runtime_error("This board does not have the CAL antenna option, cannot self-calibrate.");
@@ -158,6 +169,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
if (not vm.count("freq_start")) freq_start = usrp->get_rx_freq_range().start() + 50e6;
if (not vm.count("freq_stop")) freq_stop = usrp->get_rx_freq_range().stop() - 50e6;
+ UHD_MSG(status) << boost::format("Calibration frequency range: %d MHz -> %d MHz") % (freq_start/1e6) % (freq_stop/1e6) << std::endl;
for (double rx_lo_i = freq_start; rx_lo_i <= freq_stop; rx_lo_i += freq_step){
const double rx_lo = tune_rx_and_tx(usrp, rx_lo_i, tx_offset);
@@ -238,7 +250,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
threads.interrupt_all();
threads.join_all();
- store_results(usrp, results, "RX", "rx", "iq");
+ store_results(results, "RX", "rx", "iq", serial);
return EXIT_SUCCESS;
}
diff --git a/host/utils/uhd_cal_tx_dc_offset.cpp b/host/utils/uhd_cal_tx_dc_offset.cpp
index c9cf757f4..eb82db826 100644
--- a/host/utils/uhd_cal_tx_dc_offset.cpp
+++ b/host/utils/uhd_cal_tx_dc_offset.cpp
@@ -20,6 +20,7 @@
#include <uhd/utils/safe_main.hpp>
#include <uhd/utils/paths.hpp>
#include <uhd/utils/algorithm.hpp>
+#include <uhd/utils/msg.hpp>
#include <uhd/usrp/multi_usrp.hpp>
#include <boost/program_options.hpp>
#include <boost/format.hpp>
@@ -94,7 +95,7 @@ static double tune_rx_and_tx(uhd::usrp::multi_usrp::sptr usrp, const double tx_l
* Main
**********************************************************************/
int UHD_SAFE_MAIN(int argc, char *argv[]){
- std::string args;
+ std::string args, subdev, serial;
double tx_wave_freq, tx_wave_ampl, rx_offset;
double freq_start, freq_stop, freq_step;
size_t nsamps;
@@ -104,6 +105,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
("help", "help message")
("verbose", "enable some verbose")
("args", po::value<std::string>(&args)->default_value(""), "device address args [default = \"\"]")
+ ("subdev", po::value<std::string>(&subdev), "Subdevice specification (default: first subdevice, often 'A')")
("tx_wave_freq", po::value<double>(&tx_wave_freq)->default_value(507.123e3), "Transmit wave frequency in Hz")
("tx_wave_ampl", po::value<double>(&tx_wave_ampl)->default_value(0.7), "Transmit wave amplitude in counts")
("rx_offset", po::value<double>(&rx_offset)->default_value(.9344e6), "RX LO offset from the TX LO in Hz")
@@ -131,6 +133,15 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl;
uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args);
+ // Configure subdev
+ if (vm.count("subdev")) {
+ usrp->set_tx_subdev_spec(subdev);
+ usrp->set_rx_subdev_spec(subdev);
+ }
+ UHD_MSG(status) << "Running calibration for " << usrp->get_tx_subdev_name(0) << std::endl;
+ serial = get_serial(usrp, "tx");
+ UHD_MSG(status) << "Daughterboard serial: " << serial << std::endl;
+
//set the antennas to cal
if (not uhd::has(usrp->get_rx_antennas(), "CAL") or not uhd::has(usrp->get_tx_antennas(), "CAL")){
throw std::runtime_error("This board does not have the CAL antenna option, cannot self-calibrate.");
@@ -160,6 +171,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
if (not vm.count("freq_start")) freq_start = usrp->get_tx_freq_range().start() + 50e6;
if (not vm.count("freq_stop")) freq_stop = usrp->get_tx_freq_range().stop() - 50e6;
+ UHD_MSG(status) << boost::format("Calibration frequency range: %d MHz -> %d MHz") % (freq_start/1e6) % (freq_stop/1e6) << std::endl;
for (double tx_lo_i = freq_start; tx_lo_i <= freq_stop; tx_lo_i += freq_step){
const double tx_lo = tune_rx_and_tx(usrp, tx_lo_i, rx_offset);
@@ -235,7 +247,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
threads.interrupt_all();
threads.join_all();
- store_results(usrp, results, "TX", "tx", "dc");
+ store_results(results, "TX", "tx", "dc", serial);
return EXIT_SUCCESS;
}
diff --git a/host/utils/uhd_cal_tx_iq_balance.cpp b/host/utils/uhd_cal_tx_iq_balance.cpp
index 20d018edf..786aac061 100644
--- a/host/utils/uhd_cal_tx_iq_balance.cpp
+++ b/host/utils/uhd_cal_tx_iq_balance.cpp
@@ -20,6 +20,7 @@
#include <uhd/utils/safe_main.hpp>
#include <uhd/utils/paths.hpp>
#include <uhd/utils/algorithm.hpp>
+#include <uhd/utils/msg.hpp>
#include <uhd/usrp/multi_usrp.hpp>
#include <boost/program_options.hpp>
#include <boost/format.hpp>
@@ -95,7 +96,7 @@ static double tune_rx_and_tx(uhd::usrp::multi_usrp::sptr usrp, const double tx_l
* Main
**********************************************************************/
int UHD_SAFE_MAIN(int argc, char *argv[]){
- std::string args;
+ std::string args, subdev, serial;
double tx_wave_freq, tx_wave_ampl, rx_offset;
double freq_start, freq_stop, freq_step;
size_t nsamps;
@@ -105,6 +106,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
("help", "help message")
("verbose", "enable some verbose")
("args", po::value<std::string>(&args)->default_value(""), "device address args [default = \"\"]")
+ ("subdev", po::value<std::string>(&subdev), "Subdevice specification (default: first subdevice, often 'A')")
("tx_wave_freq", po::value<double>(&tx_wave_freq)->default_value(507.123e3), "Transmit wave frequency in Hz")
("tx_wave_ampl", po::value<double>(&tx_wave_ampl)->default_value(0.7), "Transmit wave amplitude in counts")
("rx_offset", po::value<double>(&rx_offset)->default_value(.9344e6), "RX LO offset from the TX LO in Hz")
@@ -122,7 +124,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
if (vm.count("help")){
std::cout << boost::format("USRP Generate TX IQ Balance Calibration Table %s") % desc << std::endl;
std::cout <<
- "This application measures leakage between RX and TX on an XCVR daughterboard to self-calibrate.\n"
+ "This application measures leakage between RX and TX on a daughterboard to self-calibrate.\n"
<< std::endl;
return EXIT_FAILURE;
}
@@ -132,6 +134,15 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl;
uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args);
+ // Configure subdev
+ if (vm.count("subdev")) {
+ usrp->set_tx_subdev_spec(subdev);
+ usrp->set_rx_subdev_spec(subdev);
+ }
+ UHD_MSG(status) << "Running calibration for " << usrp->get_tx_subdev_name(0) << std::endl;
+ serial = get_serial(usrp, "tx");
+ UHD_MSG(status) << "Daughterboard serial: " << serial << std::endl;
+
//set the antennas to cal
if (not uhd::has(usrp->get_rx_antennas(), "CAL") or not uhd::has(usrp->get_tx_antennas(), "CAL")){
throw std::runtime_error("This board does not have the CAL antenna option, cannot self-calibrate.");
@@ -161,6 +172,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
if (not vm.count("freq_start")) freq_start = usrp->get_tx_freq_range().start() + 50e6;
if (not vm.count("freq_stop")) freq_stop = usrp->get_tx_freq_range().stop() - 50e6;
+ UHD_MSG(status) << boost::format("Calibration frequency range: %d MHz -> %d MHz") % (freq_start/1e6) % (freq_stop/1e6) << std::endl;
for (double tx_lo_i = freq_start; tx_lo_i <= freq_stop; tx_lo_i += freq_step){
const double tx_lo = tune_rx_and_tx(usrp, tx_lo_i, rx_offset);
@@ -241,7 +253,8 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){
threads.interrupt_all();
threads.join_all();
- store_results(usrp, results, "TX", "tx", "iq");
+ store_results(results, "TX", "tx", "iq", serial);
return EXIT_SUCCESS;
}
+
diff --git a/host/utils/usrp_cal_utils.hpp b/host/utils/usrp_cal_utils.hpp
index 40626dfaa..5aff5e22f 100644
--- a/host/utils/usrp_cal_utils.hpp
+++ b/host/utils/usrp_cal_utils.hpp
@@ -179,27 +179,37 @@ static inline void write_samples_to_file(
outfile.close();
}
+
/***********************************************************************
- * Store data to file
+ * Retrieve d'board serial
**********************************************************************/
-static void store_results(
+static std::string get_serial(
uhd::usrp::multi_usrp::sptr usrp,
- const std::vector<result_t> &results,
- const std::string &XX,
- const std::string &xx,
- const std::string &what
+ const std::string &tx_rx
){
- //extract eeprom serial
uhd::property_tree::sptr tree = usrp->get_device()->get_tree();
- const uhd::fs_path db_path = "/mboards/0/dboards/A/" + xx + "_eeprom";
+ uhd::usrp::subdev_spec_t subdev_spec = usrp->get_rx_subdev_spec();
+ const uhd::fs_path db_path = "/mboards/0/dboards/" + subdev_spec[0].db_name + "/" + tx_rx + "_eeprom";
const uhd::usrp::dboard_eeprom_t db_eeprom = tree->access<uhd::usrp::dboard_eeprom_t>(db_path).get();
+ return db_eeprom.serial;
+}
+/***********************************************************************
+ * Store data to file
+ **********************************************************************/
+static void store_results(
+ const std::vector<result_t> &results,
+ const std::string &XX, // "TX" or "RX"
+ const std::string &xx, // "tx" or "rx"
+ const std::string &what, // Type of test, e.g. "iq",
+ const std::string &serial
+){
//make the calibration file path
fs::path cal_data_path = fs::path(uhd::get_app_path()) / ".uhd";
fs::create_directory(cal_data_path);
cal_data_path = cal_data_path / "cal";
fs::create_directory(cal_data_path);
- cal_data_path = cal_data_path / str(boost::format("%s_%s_cal_v0.2_%s.csv") % xx % what % db_eeprom.serial);
+ cal_data_path = cal_data_path / str(boost::format("%s_%s_cal_v0.2_%s.csv") % xx % what % serial);
if (fs::exists(cal_data_path)){
fs::rename(cal_data_path, cal_data_path.string() + str(boost::format(".%d") % time(NULL)));
}
@@ -207,7 +217,7 @@ static void store_results(
//fill the calibration file
std::ofstream cal_data(cal_data_path.string().c_str());
cal_data << boost::format("name, %s Frontend Calibration\n") % XX;
- cal_data << boost::format("serial, %s\n") % db_eeprom.serial;
+ cal_data << boost::format("serial, %s\n") % serial;
cal_data << boost::format("timestamp, %d\n") % time(NULL);
cal_data << boost::format("version, 0, 1\n");
cal_data << boost::format("DATA STARTS HERE\n");
@@ -259,3 +269,4 @@ static void capture_samples(
throw std::runtime_error("did not get all the samples requested");
}
}
+
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 21:23:03 +0000