diff options
Diffstat (limited to 'host/lib')
100 files changed, 6473 insertions, 1587 deletions
diff --git a/host/lib/CMakeLists.txt b/host/lib/CMakeLists.txt index d8c6fad70..3d4ba8a68 100644 --- a/host/lib/CMakeLists.txt +++ b/host/lib/CMakeLists.txt @@ -89,6 +89,7 @@ CONFIGURE_FILE( LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/deprecated.cpp ${CMAKE_CURRENT_SOURCE_DIR}/device.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/image_loader.cpp ${CMAKE_CURRENT_SOURCE_DIR}/stream.cpp ${CMAKE_CURRENT_SOURCE_DIR}/exception.cpp ${CMAKE_CURRENT_SOURCE_DIR}/property_tree.cpp @@ -103,8 +104,24 @@ IF(MSVC) IF(UHD_VERSION_DEVEL) SET(RC_TRIMMED_VERSION_PATCH "999") ENDIF(UHD_VERSION_DEVEL) + + # Allow a custom .rc template file to be used + IF(CUSTOM_RC_FILE) + IF(IS_ABSOLUTE "${CUSTOM_RC_FILE}") + SET(UHD_RC_IN "${CUSTOM_RC_FILE}") + ELSE() + SET(UHD_RC_IN "${CMAKE_BINARY_DIR}/${CUSTOM_RC_FILE}") + ENDIF(IS_ABSOLUTE "${CUSTOM_RC_FILE}") + MESSAGE(STATUS "") + MESSAGE(STATUS "Using custom RC template: ${UHD_RC_IN}") + MESSAGE(STATUS "") + ELSE() + SET(UHD_RC_IN "${CMAKE_CURRENT_SOURCE_DIR}/uhd.rc.in") + ENDIF(CUSTOM_RC_FILE) + SET(UHD_RC_IN ${UHD_RC_IN} CACHE STRING "uhd.rc template filepath") + CONFIGURE_FILE( - ${CMAKE_CURRENT_SOURCE_DIR}/uhd.rc.in + ${UHD_RC_IN} ${CMAKE_CURRENT_BINARY_DIR}/uhd.rc @ONLY) diff --git a/host/lib/convert/CMakeLists.txt b/host/lib/convert/CMakeLists.txt index 5204c29ea..024c2260b 100644 --- a/host/lib/convert/CMakeLists.txt +++ b/host/lib/convert/CMakeLists.txt @@ -22,40 +22,6 @@ INCLUDE(CheckIncludeFileCXX) MESSAGE(STATUS "") ######################################################################## -# Look for Orc support -######################################################################## -FIND_PACKAGE(ORC) - -IF(NOT ORCC_EXECUTABLE) - FIND_PROGRAM(ORCC_EXECUTABLE orcc) -ENDIF() - -LIBUHD_REGISTER_COMPONENT("ORC" ENABLE_ORC ON "ENABLE_LIBUHD;ORC_FOUND;ORCC_EXECUTABLE" OFF) - -IF(ENABLE_ORC) - INCLUDE_DIRECTORIES(${ORC_INCLUDE_DIRS}) - LINK_DIRECTORIES(${ORC_LIBRARY_DIRS}) - ENABLE_LANGUAGE(C) - - SET(orcc_src ${CMAKE_CURRENT_SOURCE_DIR}/convert_orc.orc) - - GET_FILENAME_COMPONENT(orc_file_name_we ${orcc_src} NAME_WE) - SET(orcc_gen ${CMAKE_CURRENT_BINARY_DIR}/${orc_file_name_we}.c) - MESSAGE(STATUS "Orc found, enabling Orc support.") - ADD_CUSTOM_COMMAND( - COMMAND ${ORCC_EXECUTABLE} --implementation -o ${orcc_gen} ${orcc_src} - DEPENDS ${orcc_src} OUTPUT ${orcc_gen} - ) - LIBUHD_APPEND_SOURCES(${orcc_gen}) - LIBUHD_APPEND_SOURCES( - ${CMAKE_CURRENT_SOURCE_DIR}/convert_with_orc.cpp - ) - LIBUHD_APPEND_LIBS(${ORC_LIBRARIES}) -ELSE(ENABLE_ORC) - MESSAGE(STATUS "Orc not found, disabling orc support.") -ENDIF(ENABLE_ORC) - -######################################################################## # Check for SSE2 SIMD headers ######################################################################## IF(CMAKE_COMPILER_IS_GNUCXX) diff --git a/host/lib/convert/convert_common.hpp b/host/lib/convert/convert_common.hpp index 6c2ea9fec..65fdcbea2 100644 --- a/host/lib/convert/convert_common.hpp +++ b/host/lib/convert/convert_common.hpp @@ -65,11 +65,10 @@ static const int PRIORITY_GENERAL = 0; static const int PRIORITY_EMPTY = -1; #ifdef __ARM_NEON__ -static const int PRIORITY_LIBORC = 3; -static const int PRIORITY_SIMD = 2; //neon conversions could be implemented better, orc wins +static const int PRIORITY_SIMD = 2; static const int PRIORITY_TABLE = 1; //tables require large cache, so they are slower on arm #else -static const int PRIORITY_LIBORC = 2; +// We used to have ORC, too, so SIMD is 3 static const int PRIORITY_SIMD = 3; static const int PRIORITY_TABLE = 1; #endif diff --git a/host/lib/convert/convert_impl.cpp b/host/lib/convert/convert_impl.cpp index 329e94a4d..fd6c8497e 100644 --- a/host/lib/convert/convert_impl.cpp +++ b/host/lib/convert/convert_impl.cpp @@ -43,10 +43,10 @@ bool convert::operator==(const convert::id_type &lhs, const convert::id_type &rh std::string convert::id_type::to_pp_string(void) const{ return str(boost::format( "conversion ID\n" - " Input format: %s\n" - " Num inputs: %d\n" + " Input format: %s\n" + " Num inputs: %d\n" " Output format: %s\n" - " Num outputs: %d\n" + " Num outputs: %d\n" ) % this->input_format % this->num_inputs @@ -55,6 +55,15 @@ std::string convert::id_type::to_pp_string(void) const{ ); } +std::string convert::id_type::to_string(void) const{ + return str(boost::format("%s (%d) -> %s (%d)") + % this->input_format + % this->num_inputs + % this->output_format + % this->num_outputs + ); +} + /*********************************************************************** * Setup the table registry **********************************************************************/ @@ -92,7 +101,15 @@ convert::function_type convert::get_converter( //find a matching priority priority_type best_prio = -1; BOOST_FOREACH(priority_type prio_i, get_table()[id].keys()){ - if (prio_i == prio) return get_table()[id][prio]; + if (prio_i == prio) { + //----------------------------------------------------------------// + UHD_LOGV(always) << "get_converter: For converter ID: " << id.to_pp_string() << std::endl + << "Using prio: " << prio << std::endl + << std::endl + ; + //----------------------------------------------------------------// + return get_table()[id][prio]; + } best_prio = std::max(best_prio, prio_i); } @@ -100,6 +117,13 @@ convert::function_type convert::get_converter( if (prio != -1) throw uhd::key_error( "Cannot find a conversion routine [with prio] for " + id.to_pp_string()); + //----------------------------------------------------------------// + UHD_LOGV(always) << "get_converter: For converter ID: " << id.to_pp_string() << std::endl + << "Using prio: " << best_prio << std::endl + << std::endl + ; + //----------------------------------------------------------------// + //otherwise, return best prio return get_table()[id][best_prio]; } diff --git a/host/lib/convert/convert_orc.orc b/host/lib/convert/convert_orc.orc deleted file mode 100644 index ffb298f26..000000000 --- a/host/lib/convert/convert_orc.orc +++ /dev/null @@ -1,79 +0,0 @@ -.function _convert_fc32_1_to_item32_1_nswap_orc -.source 8 src -.dest 4 dst -.floatparam 4 scalar -.temp 8 scaled -.temp 8 converted -.temp 4 short -x2 mulf scaled, src, scalar -x2 convfl converted, scaled -x2 convlw short, converted -swapl short, short -x2 swapw dst, short - -.function _convert_fc32_1_to_item32_1_bswap_orc -.source 8 src -.dest 4 dst -.floatparam 4 scalar -.temp 8 scaled -.temp 8 converted -.temp 4 short -x2 mulf scaled, src, scalar -x2 convfl converted, scaled -x2 convlw short, converted -x2 swapw dst, short - -.function _convert_item32_1_to_fc32_1_nswap_orc -.source 4 src -.dest 8 dst -.floatparam 4 scalar -.temp 4 tmp1 -.temp 8 tmp2 -x2 swapw tmp1, src -swapl tmp1, tmp1 -x2 convswl tmp2, tmp1 -x2 convlf tmp2, tmp2 -x2 mulf dst, tmp2, scalar - -.function _convert_item32_1_to_fc32_1_bswap_orc -.source 4 src -.dest 8 dst -.floatparam 4 scalar -.temp 4 tmp1 -.temp 8 tmp2 -x2 swapw tmp1, src -x2 convswl tmp2, tmp1 -x2 convlf tmp2, tmp2 -x2 mulf dst, tmp2, scalar - -.function _convert_sc16_1_to_item32_1_nswap_orc -.source 4 src -.dest 4 dst -.temp 4 tmp -.floatparam 4 scalar -swapl tmp, src -x2 swapw dst, tmp - -.function _convert_item32_1_to_sc16_1_nswap_orc -.source 4 src -.dest 4 dst -.floatparam 4 scalar -.temp 4 tmp -x2 swapw tmp, src -swapl dst, tmp - -.function _convert_swap_byte_pairs_orc -.source 4 src -.dest 4 dst -swapl dst, src - -.function _convert_fc32_1_to_sc8_1_nswap_orc -.source 8 src -.dest 2 dst -.temp 8 tmp -.temp 4 tmp2 -.floatparam 4 scalar -x2 mulf tmp, src, scalar -x2 convfl tmp, tmp -x2 convlw tmp2, tmp -x2 convwb dst, tmp2 diff --git a/host/lib/convert/convert_with_orc.cpp b/host/lib/convert/convert_with_orc.cpp deleted file mode 100644 index 19755fa44..000000000 --- a/host/lib/convert/convert_with_orc.cpp +++ /dev/null @@ -1,65 +0,0 @@ -// -// Copyright 2011-2013 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#include "convert_common.hpp" -#include <uhd/utils/byteswap.hpp> - -using namespace uhd::convert; - -extern "C" { -extern void _convert_fc32_1_to_item32_1_nswap_orc(void *, const void *, float, int); -extern void _convert_fc32_1_to_item32_1_bswap_orc(void *, const void *, float, int); -extern void _convert_item32_1_to_fc32_1_nswap_orc(void *, const void *, float, int); -extern void _convert_item32_1_to_fc32_1_bswap_orc(void *, const void *, float, int); -extern void _convert_sc16_1_to_item32_1_nswap_orc(void *, const void *, float, int); -extern void _convert_item32_1_to_sc16_1_nswap_orc(void *, const void *, float, int); -extern void _convert_fc32_1_to_sc8_1_nswap_orc(void *, const void *, float, int); -extern void _convert_swap_byte_pairs_orc(void *, const void *, int); -} - -DECLARE_CONVERTER(fc32, 1, sc16_item32_le, 1, PRIORITY_LIBORC){ - _convert_fc32_1_to_item32_1_nswap_orc(outputs[0], inputs[0], scale_factor, nsamps); -} - -DECLARE_CONVERTER(fc32, 1, sc16_item32_be, 1, PRIORITY_LIBORC){ - _convert_fc32_1_to_item32_1_bswap_orc(outputs[0], inputs[0], scale_factor, nsamps); -} - -DECLARE_CONVERTER(sc16_item32_le, 1, fc32, 1, PRIORITY_LIBORC){ - _convert_item32_1_to_fc32_1_nswap_orc(outputs[0], inputs[0], scale_factor, nsamps); -} - -DECLARE_CONVERTER(sc16_item32_be, 1, fc32, 1, PRIORITY_LIBORC){ - _convert_item32_1_to_fc32_1_bswap_orc(outputs[0], inputs[0], scale_factor, nsamps); -} - -DECLARE_CONVERTER(sc16, 1, sc16_item32_le, 1, PRIORITY_LIBORC){ - _convert_sc16_1_to_item32_1_nswap_orc(outputs[0], inputs[0], scale_factor, nsamps); -} - -DECLARE_CONVERTER(sc16_item32_le, 1, sc16, 1, PRIORITY_LIBORC){ - _convert_item32_1_to_sc16_1_nswap_orc(outputs[0], inputs[0], scale_factor, nsamps); -} - -DECLARE_CONVERTER(fc32, 1, sc8_item32_be, 1, PRIORITY_LIBORC){ - _convert_fc32_1_to_sc8_1_nswap_orc(outputs[0], inputs[0], scale_factor, nsamps); -} - -DECLARE_CONVERTER(fc32, 1, sc8_item32_le, 1, PRIORITY_LIBORC){ - _convert_fc32_1_to_sc8_1_nswap_orc(outputs[0], inputs[0], scale_factor, nsamps); - _convert_swap_byte_pairs_orc(outputs[0], outputs[0], (nsamps + 1)/2); -} diff --git a/host/lib/convert/gen_convert_general.py b/host/lib/convert/gen_convert_general.py index b0790755a..8090f14bd 100644 --- a/host/lib/convert/gen_convert_general.py +++ b/host/lib/convert/gen_convert_general.py @@ -17,92 +17,94 @@ # TMPL_HEADER = """ -#import time +<% + import time +%> /*********************************************************************** - * This file was generated by $file on $time.strftime("%c") + * This file was generated by ${file} on ${time.strftime("%c")} **********************************************************************/ -\#include "convert_common.hpp" -\#include <uhd/utils/byteswap.hpp> +#include "convert_common.hpp" +#include <uhd/utils/byteswap.hpp> using namespace uhd::convert; """ TMPL_CONV_GEN2_ITEM32 = """ -DECLARE_CONVERTER(item32, 1, sc16_item32_$(end), 1, PRIORITY_GENERAL){ +DECLARE_CONVERTER(item32, 1, sc16_item32_${end}, 1, PRIORITY_GENERAL){ const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); for (size_t i = 0; i < nsamps; i++){ - output[i] = $(to_wire)(input[i]); + output[i] = ${to_wire}(input[i]); } } -DECLARE_CONVERTER(sc16_item32_$(end), 1, item32, 1, PRIORITY_GENERAL){ +DECLARE_CONVERTER(sc16_item32_${end}, 1, item32, 1, PRIORITY_GENERAL){ const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); for (size_t i = 0; i < nsamps; i++){ - output[i] = $(to_host)(input[i]); + output[i] = ${to_host}(input[i]); } } """ TMPL_CONV_USRP1_COMPLEX = """ -DECLARE_CONVERTER($(cpu_type), $(width), sc16_item16_usrp1, 1, PRIORITY_GENERAL){ - #for $w in range($width) - const $(cpu_type)_t *input$(w) = reinterpret_cast<const $(cpu_type)_t *>(inputs[$(w)]); - #end for +DECLARE_CONVERTER(${cpu_type}, ${width}, sc16_item16_usrp1, 1, PRIORITY_GENERAL){ + % for w in range(width): + const ${cpu_type}_t *input${w} = reinterpret_cast<const ${cpu_type}_t *>(inputs[${w}]); + % endfor boost::uint16_t *output = reinterpret_cast<boost::uint16_t *>(outputs[0]); for (size_t i = 0, j = 0; i < nsamps; i++){ - #for $w in range($width) - output[j++] = $(to_wire)(boost::uint16_t(boost::int16_t(input$(w)[i].real()$(do_scale)))); - output[j++] = $(to_wire)(boost::uint16_t(boost::int16_t(input$(w)[i].imag()$(do_scale)))); - #end for + % for w in range(width): + output[j++] = ${to_wire}(boost::uint16_t(boost::int16_t(input${w}[i].real()${do_scale}))); + output[j++] = ${to_wire}(boost::uint16_t(boost::int16_t(input${w}[i].imag()${do_scale}))); + % endfor } } -DECLARE_CONVERTER(sc16_item16_usrp1, 1, $(cpu_type), $(width), PRIORITY_GENERAL){ +DECLARE_CONVERTER(sc16_item16_usrp1, 1, ${cpu_type}, ${width}, PRIORITY_GENERAL){ const boost::uint16_t *input = reinterpret_cast<const boost::uint16_t *>(inputs[0]); - #for $w in range($width) - $(cpu_type)_t *output$(w) = reinterpret_cast<$(cpu_type)_t *>(outputs[$(w)]); - #end for + % for w in range(width): + ${cpu_type}_t *output${w} = reinterpret_cast<${cpu_type}_t *>(outputs[${w}]); + % endfor for (size_t i = 0, j = 0; i < nsamps; i++){ - #for $w in range($width) - output$(w)[i] = $(cpu_type)_t( - boost::int16_t($(to_host)(input[j+0]))$(do_scale), - boost::int16_t($(to_host)(input[j+1]))$(do_scale) + % for w in range(width): + output${w}[i] = ${cpu_type}_t( + boost::int16_t(${to_host}(input[j+0]))${do_scale}, + boost::int16_t(${to_host}(input[j+1]))${do_scale} ); j += 2; - #end for + % endfor } } -DECLARE_CONVERTER(sc8_item16_usrp1, 1, $(cpu_type), $(width), PRIORITY_GENERAL){ +DECLARE_CONVERTER(sc8_item16_usrp1, 1, ${cpu_type}, ${width}, PRIORITY_GENERAL){ const boost::uint16_t *input = reinterpret_cast<const boost::uint16_t *>(inputs[0]); - #for $w in range($width) - $(cpu_type)_t *output$(w) = reinterpret_cast<$(cpu_type)_t *>(outputs[$(w)]); - #end for + % for w in range(width): + ${cpu_type}_t *output${w} = reinterpret_cast<${cpu_type}_t *>(outputs[${w}]); + % endfor for (size_t i = 0, j = 0; i < nsamps; i++){ - #for $w in range($width) + % for w in range(width): { - const boost::uint16_t num = $(to_host)(input[j++]); - output$(w)[i] = $(cpu_type)_t( - boost::int8_t(num)$(do_scale), - boost::int8_t(num >> 8)$(do_scale) + const boost::uint16_t num = ${to_host}(input[j++]); + output${w}[i] = ${cpu_type}_t( + boost::int8_t(num)${do_scale}, + boost::int8_t(num >> 8)${do_scale} ); } - #end for + % endfor } } """ def parse_tmpl(_tmpl_text, **kwargs): - from Cheetah.Template import Template - return str(Template(_tmpl_text, kwargs)) + from mako.template import Template + return Template(_tmpl_text).render(**kwargs) if __name__ == '__main__': import sys, os diff --git a/host/lib/ic_reg_maps/common.py b/host/lib/ic_reg_maps/common.py index 24f5bf8be..5c0cfc109 100644..100755 --- a/host/lib/ic_reg_maps/common.py +++ b/host/lib/ic_reg_maps/common.py @@ -1,5 +1,5 @@ # -# Copyright 2010-2011 Ettus Research LLC +# Copyright 2010-2011,2015 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -18,105 +18,99 @@ import re import sys import math -from Cheetah.Template import Template +from mako.template import Template -COMMON_TMPL = """\ -#import time +COMMON_TMPL = """<% import time %>\ /*********************************************************************** - * This file was generated by $file on $time.strftime("%c") + * This file was generated by ${file} on ${time.strftime("%c")} **********************************************************************/ -\#ifndef INCLUDED_$(name.upper())_HPP -\#define INCLUDED_$(name.upper())_HPP +#ifndef INCLUDED_${name.upper()}_HPP +#define INCLUDED_${name.upper()}_HPP -\#include <uhd/config.hpp> -\#include <uhd/exception.hpp> -\#include <boost/cstdint.hpp> -\#include <set> +#include <uhd/config.hpp> +#include <uhd/exception.hpp> +#include <boost/cstdint.hpp> +#include <set> -class $(name)_t{ +class ${name}_t{ public: - #for $reg in $regs - #if $reg.get_enums() - enum $reg.get_type(){ - #for $i, $enum in enumerate($reg.get_enums()) - #set $end_comma = ',' if $i < len($reg.get_enums())-1 else '' - $(reg.get_name().upper())_$(enum[0].upper()) = $enum[1]$end_comma - #end for + % for reg in regs: + % if reg.get_enums(): + enum ${reg.get_type()}{ + % for i,enum in enumerate(reg.get_enums()): + ${reg.get_name().upper()}_${enum[0].upper()} = ${enum[1]}<% comma = ',' if i != (len(reg.get_enums())-1) else '' %>${comma} + % endfor }; - #end if - $reg.get_type() $reg.get_name(); - #end for + % endif + ${reg.get_type()} ${reg.get_name()}; + % endfor - $(name)_t(void){ + ${name}_t(void){ _state = NULL; - #for $reg in $regs - $reg.get_name() = $reg.get_default(); - #end for + % for reg in regs: + ${reg.get_name()} = ${reg.get_default()}; + % endfor } - ~$(name)_t(void){ + ~${name}_t(void){ delete _state; } - $body + ${body} void save_state(void){ - if (_state == NULL) _state = new $(name)_t(); - #for $reg in $regs - _state->$reg.get_name() = this->$reg.get_name(); - #end for + if (_state == NULL) _state = new ${name}_t(); + % for reg in regs: + _state->${reg.get_name()} = this->${reg.get_name()}; + % endfor } template<typename T> std::set<T> get_changed_addrs(void){ if (_state == NULL) throw uhd::runtime_error("no saved state"); //check each register for changes std::set<T> addrs; - #for $reg in $regs - if(_state->$reg.get_name() != this->$reg.get_name()){ - addrs.insert($reg.get_addr()); + % for reg in regs: + if(_state->${reg.get_name()} != this->${reg.get_name()}){ + addrs.insert(${reg.get_addr()}); } - #end for + % endfor return addrs; } - #for $mreg in $mregs - $mreg.get_type() get_$(mreg.get_name())(void){ - return - #set $shift = 0 - #for $reg in $mreg.get_regs() - ($(mreg.get_type())($reg.get_name() & $reg.get_mask()) << $shift) | - #set $shift = $shift + $reg.get_bit_width() - #end for + % for mreg in mregs: + ${mreg.get_type()} get_${mreg.get_name()}(void){ + return <% shift = 0 %> + % for reg in mreg.get_regs(): + (${mreg.get_type()}(${reg.get_name()} & ${reg.get_mask()}) << ${shift}) |<% shift = shift + reg.get_bit_width() %> + % endfor 0; } - void set_$(mreg.get_name())($mreg.get_type() reg){ - #set $shift = 0 - #for $reg in $mreg.get_regs() - $reg.get_name() = (reg >> $shift) & $reg.get_mask(); - #set $shift = $shift + $reg.get_bit_width() - #end for + void set_${mreg.get_name()}(${mreg.get_type()} reg){<% shift = 0 %> + % for reg in mreg.get_regs(): + ${reg.get_name()} = (reg >> ${shift}) & ${reg.get_mask()};<% shift = shift + reg.get_bit_width() %> + % endfor } - #end for + % endfor private: - $(name)_t *_state; + ${name}_t *_state; }; -\#endif /* INCLUDED_$(name.upper())_HPP */ +#endif /* INCLUDED_${name.upper()}_HPP */ """ def parse_tmpl(_tmpl_text, **kwargs): - return str(Template(_tmpl_text, kwargs)) + return Template(_tmpl_text).render(**kwargs) def to_num(arg): return int(eval(arg)) class reg: def __init__(self, reg_des): try: self.parse(reg_des) - except Exception, e: - raise Exception, 'Error parsing register description: "%s"\nWhat: %s'%(reg_des, e) + except Exception as e: + raise Exception('Error parsing register description: "%s"\nWhat: %s'%(reg_des, e)) def parse(self, reg_des): x = re.match('^(\w*)\s*(\w*)\[(.*)\]\s*(\w*)\s*(.*)$', reg_des) @@ -133,7 +127,8 @@ class reg: self._enums = list() if enums: enum_val = 0 - for enum_str in map(str.strip, enums.split(',')): + for enum_str_unstripped in enums.split(','): + enum_str = enum_str_unstripped.strip() if '=' in enum_str: enum_name, enum_val = enum_str.split('=') enum_val = to_num(enum_val) @@ -146,7 +141,7 @@ class reg: def get_name(self): return self._name def get_default(self): for key, val in self.get_enums(): - if val == self._default: return str.upper('%s_%s'%(self.get_name(), key)) + if val == self._default: return ('%s_%s'%(self.get_name(), key)).upper() return self._default def get_type(self): if self.get_enums(): return '%s_t'%self.get_name() @@ -158,14 +153,14 @@ class reg: class mreg: def __init__(self, mreg_des, regs): try: self.parse(mreg_des, regs) - except Exception, e: - raise Exception, 'Error parsing meta register description: "%s"\nWhat: %s'%(mreg_des, e) + except Exception as e: + raise Exception('Error parsing meta register description: "%s"\nWhat: %s'%(mreg_des, e)) def parse(self, mreg_des, regs): x = re.match('^~(\w*)\s+(.*)\s*$', mreg_des) self._name, reg_names = x.groups() regs_dict = dict([(reg.get_name(), reg) for reg in regs]) - self._regs = [regs_dict[reg_name] for reg_name in map(str.strip, reg_names.split(','))] + self._regs = [regs_dict[reg_name.strip()] for reg_name in reg_names.split(',')] def get_name(self): return self._name def get_regs(self): return self._regs diff --git a/host/lib/ic_reg_maps/gen_ad5623_regs.py b/host/lib/ic_reg_maps/gen_ad5623_regs.py index e653921ba..8b70a9f0a 100755 --- a/host/lib/ic_reg_maps/gen_ad5623_regs.py +++ b/host/lib/ic_reg_maps/gen_ad5623_regs.py @@ -32,9 +32,9 @@ cmd 0[19:21] 0 wr_input_n, up_dac_n, wr_input_n_up_a BODY_TMPL="""\ boost::uint32_t get_reg(void){ boost::uint32_t reg = 0; - #for $reg in filter(lambda r: r.get_addr() == 0, $regs) - reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for reg in filter(lambda r: r.get_addr() == 0, regs): + reg |= (boost::uint32_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor return reg; } """ diff --git a/host/lib/ic_reg_maps/gen_ad7922_regs.py b/host/lib/ic_reg_maps/gen_ad7922_regs.py index 5cec1924a..c77991182 100755 --- a/host/lib/ic_reg_maps/gen_ad7922_regs.py +++ b/host/lib/ic_reg_maps/gen_ad7922_regs.py @@ -32,16 +32,16 @@ chn 0[13] 0 BODY_TMPL="""\ boost::uint16_t get_reg(void){ boost::uint16_t reg = 0; - #for $reg in filter(lambda r: r.get_addr() == 0, $regs) - reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for reg in filter(lambda r: r.get_addr() == 0, regs): + reg |= (boost::uint32_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor return reg; } void set_reg(boost::uint16_t reg){ - #for $reg in filter(lambda r: r.get_addr() == 0, $regs) - $reg.get_name() = $(reg.get_type())((reg >> $reg.get_shift()) & $reg.get_mask()); - #end for + % for reg in filter(lambda r: r.get_addr() == 0, regs): + ${reg.get_name()} = ${reg.get_type()}((reg >> ${reg.get_shift()}) & ${reg.get_mask()}); + % endfor } """ diff --git a/host/lib/ic_reg_maps/gen_ad9510_regs.py b/host/lib/ic_reg_maps/gen_ad9510_regs.py index 6c1e612cc..9f194b5c9 100755 --- a/host/lib/ic_reg_maps/gen_ad9510_regs.py +++ b/host/lib/ic_reg_maps/gen_ad9510_regs.py @@ -54,25 +54,25 @@ lock_detect_disable 0xD[6] 0 enb, dis ######################################################################## ## fine delay adjust ######################################################################## -#for $i, $o in ((5, 0), (6, 4)) -delay_control_out$i $hex(0x34+$o)[0] 0 -ramp_current_out$i $hex(0x35+$o)[0:2] 0 200ua, 400ua, 600ua, 800ua, 1000ua, 1200ua, 1400ua, 1600ua -ramp_capacitor_out$i $hex(0x35+$o)[3:5] 0 4caps=0, 3caps=1, 2caps=3, 1cap=7 -delay_fine_adjust_out$i $hex(0x36+$o)[1:5] 0 -#end for +% for i, o in ((5, 0), (6, 4)): +delay_control_out${i} ${hex(0x34+o)}[0] 0 +ramp_current_out${i} ${hex(0x35+o)}[0:2] 0 200ua, 400ua, 600ua, 800ua, 1000ua, 1200ua, 1400ua, 1600ua +ramp_capacitor_out${i} ${hex(0x35+o)}[3:5] 0 4caps=0, 3caps=1, 2caps=3, 1cap=7 +delay_fine_adjust_out${i} ${hex(0x36+o)}[1:5] 0 +% endfor ######################################################################## ## outputs ######################################################################## -#for $i, $o in ((0, 0), (1, 1), (2, 2), (3, 3)) -power_down_lvpecl_out$i $hex(0x3C+$o)[0:1] 0 normal, test, safe_pd, total_pd -output_level_lvpecl_out$i $hex(0x3C+$o)[2:3] 2 500mv, 340mv, 810mv, 660mv -#end for -#for $i, $o in ((4, 0), (5, 1), (6, 2), (7, 3)) -power_down_lvds_cmos_out$i $hex(0x40+$o)[0] 0 -output_level_lvds_out$i $hex(0x40+$o)[1:2] 1 1_75ma, 3_5ma, 5_25ma, 7ma -lvds_cmos_select_out$i $hex(0x40+$o)[3] 1 lvds, cmos -inverted_cmos_driver_out$i $hex(0x40+$o)[4] 0 dis, enb -#end for +% for i, o in ((0, 0), (1, 1), (2, 2), (3, 3)): +power_down_lvpecl_out${i} ${hex(0x3C+o)}[0:1] 0 normal, test, safe_pd, total_pd +output_level_lvpecl_out${i} ${hex(0x3C+o)}[2:3] 2 500mv, 340mv, 810mv, 660mv +% endfor +% for i, o in ((4, 0), (5, 1), (6, 2), (7, 3)): +power_down_lvds_cmos_out${i} ${hex(0x40+o)}[0] 0 +output_level_lvds_out${i} ${hex(0x40+o)}[1:2] 1 1_75ma, 3_5ma, 5_25ma, 7ma +lvds_cmos_select_out${i} ${hex(0x40+o)}[3] 1 lvds, cmos +inverted_cmos_driver_out${i} ${hex(0x40+o)}[4] 0 dis, enb +% endfor clock_select 0x45[0] 1 clk2_drives, clk1_drives clk1_power_down 0x45[1] 0 clk2_power_down 0x45[2] 0 @@ -82,15 +82,15 @@ all_clock_inputs_pd 0x45[5] 0 ######################################################################## ## dividers ######################################################################## -#for $i, $o in ((0, 0), (1, 2), (2, 4), (3, 6), (4, 8), (5, 10), (6, 12), (7, 14)) -divider_high_cycles_out$i $hex(0x48+$o)[0:3] 0 -divider_low_cycles_out$i $hex(0x48+$o)[4:7] 0 -phase_offset_out$i $hex(0x49+$o)[0:3] 0 -start_out$i $hex(0x49+$o)[4] 0 -force_out$i $hex(0x49+$o)[5] 0 -nosync_out$i $hex(0x49+$o)[6] 0 -bypass_divider_out$i $hex(0x49+$o)[7] 0 -#end for +% for i, o in ((0, 0), (1, 2), (2, 4), (3, 6), (4, 8), (5, 10), (6, 12), (7, 14)): +divider_high_cycles_out${i} ${hex(0x48+o)}[0:3] 0 +divider_low_cycles_out${i} ${hex(0x48+o)}[4:7] 0 +phase_offset_out${i} ${hex(0x49+o)}[0:3] 0 +start_out${i} ${hex(0x49+o)}[4] 0 +force_out${i} ${hex(0x49+o)}[5] 0 +nosync_out${i} ${hex(0x49+o)}[6] 0 +bypass_divider_out${i} ${hex(0x49+o)}[7] 0 +% endfor ######################################################################## ## function ######################################################################## @@ -110,13 +110,13 @@ BODY_TMPL="""\ boost::uint8_t get_reg(boost::uint16_t addr){ boost::uint8_t reg = 0; switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint32_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } return reg; } diff --git a/host/lib/ic_reg_maps/gen_ad9522_regs.py b/host/lib/ic_reg_maps/gen_ad9522_regs.py index 1512da811..cc906b76c 100755 --- a/host/lib/ic_reg_maps/gen_ad9522_regs.py +++ b/host/lib/ic_reg_maps/gen_ad9522_regs.py @@ -1,6 +1,6 @@ #!/usr/bin/env python # -# Copyright 2010-2011 Ettus Research LLC +# Copyright 2010-2011,2015 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -88,39 +88,38 @@ ref2_freq_gt_thresh 0x01F[2] 0 ref1_freq_gt_thresh 0x01F[1] 0 digital_lock_detect 0x01F[0] 0 ######################################################################## -#for $i in range(12) -#set $addr = ($i + 0x0F0) -out$(i)_format $(addr)[7] 0 lvds, cmos -out$(i)_cmos_configuration $(addr)[6:5] 3 off, a_on, b_on, ab_on -out$(i)_polarity $(addr)[4:3] 0 lvds_a_non_b_inv=0, lvds_a_inv_b_non=1, cmos_ab_non=0, cmos_ab_inv=1, cmos_a_non_b_inv=2, cmos_a_inv_b_non=3 -out$(i)_lvds_diff_voltage $(addr)[2:1] 1 1_75ma, 3_5ma, 5_25ma, 7_0ma -out$(i)_lvds_power_down $(addr)[0] 0 -#end for +% for i in range(12): +<% addr = (i + 0x0F0) %>\ +out${i}_format ${addr}[7] 0 lvds, cmos +out${i}_cmos_configuration ${addr}[6:5] 3 off, a_on, b_on, ab_on +out${i}_polarity ${addr}[4:3] 0 lvds_a_non_b_inv=0, lvds_a_inv_b_non=1, cmos_ab_non=0, cmos_ab_inv=1, cmos_a_non_b_inv=2, cmos_a_inv_b_non=3 +out${i}_lvds_diff_voltage ${addr}[2:1] 1 1_75ma, 3_5ma, 5_25ma, 7_0ma +out${i}_lvds_power_down ${addr}[0] 0 +% endfor ######################################################################## -#for $i in reversed(range(8)) -csdld_en_out_$i 0x0FC[$i] 0 ignore, async -#end for +% for i in reversed(range(8)): +csdld_en_out_${i} 0x0FC[${i}] 0 ignore, async +% endfor ######################################################################## -#for $i in reversed(range(4)) -csdld_en_out_$(8 + $i) 0x0FD[$i] 0 ignore, async -#end for +% for i in reversed(range(4)): +csdld_en_out_${8 + i} 0x0FD[${i}] 0 ignore, async +% endfor ######################################################################## -#set $default_val = 0x7 -#for $i in range(4) -#set $addr0 = hex($i*3 + 0x190) -#set $addr1 = hex($i*3 + 0x191) -#set $addr2 = hex($i*3 + 0x192) -divider$(i)_low_cycles $(addr0)[7:4] $default_val -divider$(i)_high_cycles $(addr0)[3:0] $default_val -divider$(i)_bypass $(addr1)[7] 0 -divider$(i)_ignore_sync $(addr1)[6] 0 -divider$(i)_force_high $(addr1)[5] 0 -divider$(i)_start_high $(addr1)[4] 0 -divider$(i)_phase_offset $(addr1)[3:0] 0 -channel$(i)_power_down $(addr2)[2] 0 -disable_divider$(i)_ddc $(addr2)[0] 0 -#set $default_val /= 2 -#end for +% for i in range(4): +<% default_val = int(0x7 / (2**i)) %>\ +<% addr0 = hex(i*3 + 0x190) %>\ +<% addr1 = hex(i*3 + 0x191) %>\ +<% addr2 = hex(i*3 + 0x192) %>\ +divider${i}_low_cycles ${addr0}[7:4] ${default_val} +divider${i}_high_cycles ${addr0}[3:0] ${default_val} +divider${i}_bypass ${addr1}[7] 0 +divider${i}_ignore_sync ${addr1}[6] 0 +divider${i}_force_high ${addr1}[5] 0 +divider${i}_start_high ${addr1}[4] 0 +divider${i}_phase_offset ${addr1}[3:0] 0 +channel${i}_power_down ${addr2}[2] 0 +disable_divider${i}_ddc ${addr2}[0] 0 +% endfor ######################################################################## vco_divider 0x1E0[2:0] 2 div2, div3, div4, div5, div6, static, div1 power_down_clock_input_sel 0x1E1[4] 0 @@ -145,13 +144,13 @@ BODY_TMPL="""\ boost::uint32_t get_reg(boost::uint16_t addr){ boost::uint32_t reg = 0; switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint8_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint8_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } if (addr == 0){ //mirror 4 bits in register 0 reg |= ((reg >> 7) & 0x1) << 0; @@ -164,13 +163,13 @@ boost::uint32_t get_reg(boost::uint16_t addr){ void set_reg(boost::uint16_t addr, boost::uint32_t reg){ switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - $reg.get_name() = $(reg.get_type())((reg >> $reg.get_shift()) & $reg.get_mask()); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + ${reg.get_name()} = ${reg.get_type()}((reg >> ${reg.get_shift()}) & ${reg.get_mask()}); + % endfor break; - #end for + % endfor } } diff --git a/host/lib/ic_reg_maps/gen_ad9777_regs.py b/host/lib/ic_reg_maps/gen_ad9777_regs.py index 47b61cf44..514283409 100755 --- a/host/lib/ic_reg_maps/gen_ad9777_regs.py +++ b/host/lib/ic_reg_maps/gen_ad9777_regs.py @@ -91,13 +91,13 @@ BODY_TMPL="""\ boost::uint8_t get_reg(boost::uint8_t addr){ boost::uint8_t reg = 0; switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint8_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint8_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } return reg; } diff --git a/host/lib/ic_reg_maps/gen_ad9862_regs.py b/host/lib/ic_reg_maps/gen_ad9862_regs.py index 00340224c..022d97c16 100755 --- a/host/lib/ic_reg_maps/gen_ad9862_regs.py +++ b/host/lib/ic_reg_maps/gen_ad9862_regs.py @@ -41,10 +41,10 @@ all_rx_pd 1[0] 0 ######################################################################## ## Rx A and B ######################################################################## -#for $x, $i in (('a', 2), ('b', 3)) -byp_buffer_$x $(i)[7] 0 -rx_pga_$x $(i)[0:4] 0 -#end for +% for x, i in (('a', 2), ('b', 3)): +byp_buffer_${x} ${i}[7] 0 +rx_pga_${x} ${i}[0:4] 0 +% endfor ######################################################################## ## Rx Misc ######################################################################## @@ -76,13 +76,13 @@ tx_analog_pd 8[0:2] 0 none=0, txb=4, txa=2, both=7 ######################################################################## ## Tx Offset and Gain ######################################################################## -#for $x, $i, $j, $k in (('a', 10, 11, 14), ('b', 12, 13, 15)) -dac_$(x)_offset_1_0 $(i)[6:7] 0 -dac_$(x)_offset_dir $(i)[0] 0 neg_diff, pos_dif -dac_$(x)_offset_9_2 $(j)[0:7] 0 -dac_$(x)_coarse_gain $(k)[6:7] 0 -dac_$(x)_fine_gain $(k)[0:5] 0 -#end for +% for x, i, j, k in (('a', 10, 11, 14), ('b', 12, 13, 15)): +dac_${x}_offset_1_0 ${i}[6:7] 0 +dac_${x}_offset_dir ${i}[0] 0 neg_diff, pos_dif +dac_${x}_offset_9_2 ${j}[0:7] 0 +dac_${x}_coarse_gain ${k}[6:7] 0 +dac_${x}_fine_gain ${k}[0:5] 0 +% endfor tx_pga_gain 16[0:7] 0 ######################################################################## ## Tx Misc @@ -139,20 +139,20 @@ dis1 25[0] 0 enb, dis ######################################################################## ## Aux ADC ######################################################################## -#for $x, $i in (('a2', 26), ('a1', 28), ('b2', 30), ('b1', 32)) -aux_adc_$(x)_1_0 $(i)[6:7] 0 -aux_adc_$(x)_9_2 $int(1+$i)[0:7] 0 -#end for +% for x, i in (('a2', 26), ('a1', 28), ('b2', 30), ('b1', 32)): +aux_adc_${x}_1_0 ${i}[6:7] 0 +aux_adc_${x}_9_2 ${int(1+i)}[0:7] 0 +% endfor ######################################################################## ## Aux ADC Control ######################################################################## aux_spi 34[7] 0 dis, enb sel_bnota 34[6] 0 adc_a, adc_b -#for $x, $i in (('b', 5), ('a', 2)) -refsel_$(x) 34[$i] 0 external, internal -select_$(x) 34[$int($i-1)] 0 aux_adc2, aux_adc1 -start_$(x) 34[$int($i-2)] 0 -#end for +% for x, i in (('b', 5), ('a', 2)): +refsel_${x} 34[${i}] 0 external, internal +select_${x} 34[${int(i-1)}] 0 aux_adc2, aux_adc1 +start_${x} 34[${int(i-2)}] 0 +% endfor ######################################################################## ## Aux ADC Clock ######################################################################## @@ -160,9 +160,9 @@ clk_4 35[0] 0 1_2, 1_4 ######################################################################## ## Aux DAC ######################################################################## -#for $x, $i in (('a', 36), ('b', 37), ('c', 38)) -aux_dac_$x $(i)[0:7] 0 -#end for +% for x, i in (('a', 36), ('b', 37), ('c', 38)): +aux_dac_${x} ${i}[0:7] 0 +% endfor ######################################################################## ## Aux DAC Update ######################################################################## @@ -205,26 +205,26 @@ BODY_TMPL=""" boost::uint8_t get_reg(boost::uint8_t addr){ boost::uint8_t reg = 0; switch(addr){ - #for $addr in range(0, 63+1) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint16_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in range(0, 63+1): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint16_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } return reg; } void set_reg(boost::uint8_t addr, boost::uint16_t reg){ switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - $reg.get_name() = $(reg.get_type())((reg >> $reg.get_shift()) & $reg.get_mask()); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + ${reg.get_name()} = ${reg.get_type()}((reg >> ${reg.get_shift()}) & ${reg.get_mask()}); + % endfor break; - #end for + % endfor } } diff --git a/host/lib/ic_reg_maps/gen_adf4350_regs.py b/host/lib/ic_reg_maps/gen_adf4350_regs.py index fce2f569b..644654dee 100755 --- a/host/lib/ic_reg_maps/gen_adf4350_regs.py +++ b/host/lib/ic_reg_maps/gen_adf4350_regs.py @@ -43,8 +43,8 @@ power_down 2[5] 0 disabled, enabled pd_polarity 2[6] 1 negative, positive ldp 2[7] 0 10ns, 6ns ldf 2[8] 0 frac_n, int_n -#set $current_setting_enums = ', '.join(map(lambda x: '_'.join(("%0.2fma"%(round(x*31.27 + 31.27)/100)).split('.')), range(0,16))) -charge_pump_current 2[9:12] 5 $current_setting_enums +<% current_setting_enums = ', '.join(map(lambda x: '_'.join(("%0.2fma"%(round(x*31.27 + 31.27)/100)).split('.')), range(0,16))) %>\ +charge_pump_current 2[9:12] 5 ${current_setting_enums} double_buffer 2[13] 0 disabled, enabled r_counter_10_bit 2[14:23] 0 reference_divide_by_2 2[24] 1 disabled, enabled @@ -101,13 +101,13 @@ enum addr_t{ boost::uint32_t get_reg(boost::uint8_t addr){ boost::uint32_t reg = addr & 0x7; switch(addr){ - #for $addr in range(5+1) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in range(5+1): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint32_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } return reg; } diff --git a/host/lib/ic_reg_maps/gen_adf4351_regs.py b/host/lib/ic_reg_maps/gen_adf4351_regs.py index 4b0ef788c..6699e5137 100755 --- a/host/lib/ic_reg_maps/gen_adf4351_regs.py +++ b/host/lib/ic_reg_maps/gen_adf4351_regs.py @@ -44,8 +44,8 @@ power_down 2[5] 0 disabled, enabled pd_polarity 2[6] 1 negative, positive ldp 2[7] 0 10ns, 6ns ldf 2[8] 0 frac_n, int_n -#set $current_setting_enums = ', '.join(map(lambda x: '_'.join(("%0.2fma"%(round(x*31.27 + 31.27)/100)).split('.')), range(0,16))) -charge_pump_current 2[9:12] 5 $current_setting_enums +<% current_setting_enums = ', '.join(map(lambda x: '_'.join(("%0.2fma"%(round(x*31.27 + 31.27)/100)).split('.')), range(0,16))) %>\ +charge_pump_current 2[9:12] 5 ${current_setting_enums} double_buffer 2[13] 0 disabled, enabled r_counter_10_bit 2[14:23] 0 reference_divide_by_2 2[24] 1 disabled, enabled @@ -105,13 +105,13 @@ enum addr_t{ boost::uint32_t get_reg(boost::uint8_t addr){ boost::uint32_t reg = addr & 0x7; switch(addr){ - #for $addr in range(5+1) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in range(5+1): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint32_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } return reg; } diff --git a/host/lib/ic_reg_maps/gen_adf4360_regs.py b/host/lib/ic_reg_maps/gen_adf4360_regs.py index 3fd8707a7..921f014ff 100755 --- a/host/lib/ic_reg_maps/gen_adf4360_regs.py +++ b/host/lib/ic_reg_maps/gen_adf4360_regs.py @@ -32,9 +32,9 @@ charge_pump_output 0[9] 0 normal, 3state cp_gain_0 0[10] 0 set1, set2 mute_till_ld 0[11] 0 dis, enb output_power_level 0[12:13] 0 3_5ma, 5_0ma, 7_5ma, 11_0ma -#set $current_setting_enums = ', '.join(map(lambda x: x+"ma", "0_31 0_62 0_93 1_25 1_56 1_87 2_18 2_50".split())) -current_setting1 0[14:16] 0 $current_setting_enums -current_setting2 0[17:19] 0 $current_setting_enums +<% current_setting_enums = ', '.join(map(lambda x: x+"ma", "0_31 0_62 0_93 1_25 1_56 1_87 2_18 2_50".split())) %>\ +current_setting1 0[14:16] 0 ${current_setting_enums} +current_setting2 0[17:19] 0 ${current_setting_enums} power_down 0[20:21] 0 normal_op=0, async_pd=1, sync_pd=3 prescaler_value 0[22:23] 0 8_9, 16_17, 32_33 ######################################################################## @@ -68,13 +68,13 @@ enum addr_t{ boost::uint32_t get_reg(addr_t addr){ boost::uint32_t reg = addr & 0x3; switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint32_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } return reg; } diff --git a/host/lib/ic_reg_maps/gen_ads62p44_regs.py b/host/lib/ic_reg_maps/gen_ads62p44_regs.py index f0a84d940..df5c0c66c 100755 --- a/host/lib/ic_reg_maps/gen_ads62p44_regs.py +++ b/host/lib/ic_reg_maps/gen_ads62p44_regs.py @@ -95,13 +95,13 @@ BODY_TMPL="""\ boost::uint8_t get_reg(boost::uint8_t addr){ boost::uint8_t reg = 0; switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint8_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint8_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } return reg; } diff --git a/host/lib/ic_reg_maps/gen_ads62p48_regs.py b/host/lib/ic_reg_maps/gen_ads62p48_regs.py index c38ce8ff1..fa5668d4f 100644..100755 --- a/host/lib/ic_reg_maps/gen_ads62p48_regs.py +++ b/host/lib/ic_reg_maps/gen_ads62p48_regs.py @@ -55,13 +55,13 @@ BODY_TMPL="""\ boost::uint8_t get_reg(boost::uint8_t addr){ boost::uint8_t reg = 0; switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint8_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint8_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } return reg; } diff --git a/host/lib/ic_reg_maps/gen_lmk04816_regs.py b/host/lib/ic_reg_maps/gen_lmk04816_regs.py index e89a82671..d432ac706 100644..100755 --- a/host/lib/ic_reg_maps/gen_lmk04816_regs.py +++ b/host/lib/ic_reg_maps/gen_lmk04816_regs.py @@ -1,4 +1,4 @@ -#Copyright 2010 Ettus Research LLC +#Copyright 2010,2015 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -26,7 +26,7 @@ address0 0[0:4] 0 CLKout0_1_DIV 0[5:15] 25 CLKout0_1_HS 0[16] 0 RESET 0[17] 0 no_reset, reset -CLKout0_1_DDLY 0[18:27] 0 five +CLKout0_1_DDLY 0[18:27] 0 CLKout0_ADLY_SEL 0[28] 0 d_pd, d_ev_x, d_odd_y, d_both CLKout1_ADLY_SEL 0[29] 0 d_pd, d_ev_x, d_odd_y, d_both Required_0 0[30] 0 @@ -94,15 +94,15 @@ CLKout10_11_PD 5[31] 1 normal, power_down ######################################################################## ## address 6 ######################################################################## -#set $CLKoutX_TYPE_ENUMS = "p_down=0, LVDS=1, LVPECL_700mVpp=2, LVPECL_1200mVpp=3, LVPECL_1600mVpp=4, LVPECL_200mVpp=5, LVCMOS=6, LVCMOS_IN=7, LVCMOS_NN=8, LVCMOS_II=9, LVCMOS_LN=10, LVCMOS_LI=11, LVCMOS_NL=12, LVCMOS_IL=13, LVCMOS_LL=1" +<% CLKoutX_TYPE_ENUMS = "p_down=0, LVDS=1, LVPECL_700mVpp=2, LVPECL_1200mVpp=3, LVPECL_1600mVpp=4, LVPECL_200mVpp=5, LVCMOS=6, LVCMOS_IN=7, LVCMOS_NN=8, LVCMOS_II=9, LVCMOS_LN=10, LVCMOS_LI=11, LVCMOS_NL=12, LVCMOS_IL=13, LVCMOS_LL=1" %>\ address6 6[0:4] 6 CLKout0_1_ADLY 6[5:9] 0 Required_6_10 6[10] 0 CLKout2_3_ADLY 6[11:15] 0 -CLKout0_TYPE 6[16:19] 0 $(CLKoutX_TYPE_ENUMS) -CLKout1_TYPE 6[20:23] 0 $(CLKoutX_TYPE_ENUMS) -CLKout2_TYPE 6[24:27] 0 $(CLKoutX_TYPE_ENUMS) -CLKout3_TYPE 6[28:31] 0 $(CLKoutX_TYPE_ENUMS) +CLKout0_TYPE 6[16:19] 0 ${CLKoutX_TYPE_ENUMS} +CLKout1_TYPE 6[20:23] 0 ${CLKoutX_TYPE_ENUMS} +CLKout2_TYPE 6[24:27] 0 ${CLKoutX_TYPE_ENUMS} +CLKout3_TYPE 6[28:31] 0 ${CLKoutX_TYPE_ENUMS} ######################################################################## ## address 7 ######################################################################## @@ -110,21 +110,21 @@ address7 7[0:4] 7 CLKout4_5_ADLY 7[5:9] 0 Required_7_10 7[10] 0 CLKout6_7_ADLY 7[11:15] 0 -CLKout4_TYPE 7[16:19] 0 $(CLKoutX_TYPE_ENUMS) -CLKout5_TYPE 7[20:23] 0 $(CLKoutX_TYPE_ENUMS) -CLKout6_TYPE 7[24:27] 0 $(CLKoutX_TYPE_ENUMS) -CLKout7_TYPE 7[28:31] 0 $(CLKoutX_TYPE_ENUMS) +CLKout4_TYPE 7[16:19] 0 ${CLKoutX_TYPE_ENUMS} +CLKout5_TYPE 7[20:23] 0 ${CLKoutX_TYPE_ENUMS} +CLKout6_TYPE 7[24:27] 0 ${CLKoutX_TYPE_ENUMS} +CLKout7_TYPE 7[28:31] 0 ${CLKoutX_TYPE_ENUMS} ######################################################################## ## address 8 ######################################################################## address8 8[0:4] 8 CLKout8_9_ADLY 8[5:9] 0 Required_8_10 8[10] 0 -CLKout10_11_ADLY 8[11:15] 0 $(CLKoutX_TYPE_ENUMS) -CLKout8_TYPE 8[16:19] 0 $(CLKoutX_TYPE_ENUMS) -CLKout9_TYPE 8[20:23] 0 $(CLKoutX_TYPE_ENUMS) -CLKout10_TYPE 8[24:27] 0 $(CLKoutX_TYPE_ENUMS) -CLKout11_TYPE 8[28:31] 0 $(CLKoutX_TYPE_ENUMS) +CLKout10_11_ADLY 8[11:15] 0 ${CLKoutX_TYPE_ENUMS} +CLKout8_TYPE 8[16:19] 0 ${CLKoutX_TYPE_ENUMS} +CLKout9_TYPE 8[20:23] 0 ${CLKoutX_TYPE_ENUMS} +CLKout10_TYPE 8[24:27] 0 ${CLKoutX_TYPE_ENUMS} +CLKout11_TYPE 8[28:31] 0 ${CLKoutX_TYPE_ENUMS} ######################################################################## ## address 9 ######################################################################## @@ -378,22 +378,18 @@ BODY_TMPL = """\ boost::uint32_t get_reg(int addr){ boost::uint32_t reg = 0; switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint32_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } return reg; } """ - - - - if __name__ == '__main__': import common; common.generate( name='lmk04816_regs', @@ -402,6 +398,3 @@ if __name__ == '__main__': file=__file__, ) - - - diff --git a/host/lib/ic_reg_maps/gen_max2112_regs.py b/host/lib/ic_reg_maps/gen_max2112_regs.py index c2fc4e3e2..be760ec2e 100755 --- a/host/lib/ic_reg_maps/gen_max2112_regs.py +++ b/host/lib/ic_reg_maps/gen_max2112_regs.py @@ -53,13 +53,14 @@ f_divider_lsb 4[0:7] 0x84 ######################################################################## ## XTAL-Divider R-Divider (5) Write ######################################################################## -#set $xtal_divider_names = ', '.join(map(lambda x: 'div' + str(x), range(1,9))) -xtal_divider 5[5:7] 0 $xtal_divider_names +<% xtal_divider_names = ', '.join(map(lambda x: 'div' + str(x), range(1,9))) %>\ +xtal_divider 5[5:7] 0 ${xtal_divider_names} r_divider 5[0:4] 1 ######################################################################## ## PLL (6) Write ######################################################################## -d24 6[7] 1 div2, div4 ## div2 for LO <= 1125M, div4 > 1125M +## div2 for LO <= 1125M, div4 > 1125M +d24 6[7] 1 div2, div4 cps 6[6] 1 i_cp_from_icp, i_cp_from_vas icp 6[5] 0 i_cp_600ua, i_cp_1200ua ##reserved 6[0:4] 0 @@ -73,7 +74,8 @@ ade 7[0] 1 disabled, enabled ######################################################################## ## LPF (8) Write ######################################################################## -lp 8[0:7] 0x4B ## map(lambda x: "%0.2f"%((4e6 + (x - 12) * 290e3)/1e6), range(255)) in MHz +## map(lambda x: "%0.2f"%((4e6 + (x - 12) * 290e3)/1e6), range(255)) in MHz +lp 8[0:7] 0x4B ######################################################################## ## Control (9) Write ######################################################################## @@ -81,7 +83,8 @@ stby 9[7] 0 normal, disable_sig_and_synth ##reserved 9[6] 0 pwdn 9[5] 0 normal, invalid ##reserved 9[4] 0 -bbg 9[0:3] 0 ## Baseband Gain in dB +## Baseband Gain in dB +bbg 9[0:3] 0 ######################################################################## ## Shutdown (0xA) Write ######################################################################## @@ -118,7 +121,8 @@ ld 0xC[4] 0 unlocked, locked ######################################################################## ## Status Byte-2 (0xD) Read ######################################################################## -vcosbr 0xD[3:7] 0 ## vco band readback +## vco band readback +vcosbr 0xD[3:7] 0 adc 0xD[0:2] 0 ool0, lock0, vaslock0, vaslock1, vaslock2, vaslock3, lock1, ool1 """ @@ -129,41 +133,30 @@ BODY_TMPL="""\ boost::uint8_t get_reg(boost::uint8_t addr){ boost::uint8_t reg = 0; switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint8_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint8_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } return boost::uint8_t(reg); } void set_reg(boost::uint8_t addr, boost::uint8_t reg){ switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - $reg.get_name() = $(reg.get_type())((reg >> $reg.get_shift()) & $reg.get_mask()); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + ${reg.get_name()} = ${reg.get_type()}((reg >> ${reg.get_shift()}) & ${reg.get_mask()}); + % endfor break; - #end for + % endfor } } """ -SPLIT_REGS_HELPER_TMPL="""\ -#for $divname in ['n','f'] -void set_$(divname)_divider(boost::uint32_t $divname){ - #for $regname in sorted(map(lambda r: r.get_name(), filter(lambda r: r.get_name().find(divname + '_divider') == 0, $regs))) - #end for -} -#end for -""" - #$regname = boost::uint8_t($divname & $regs[regname].get_mask()); - #$divname = boost::uint32_t($divname >> $regs[regname].get_shift()); - if __name__ == '__main__': import common; common.generate( name='max2112_write_regs', diff --git a/host/lib/ic_reg_maps/gen_max2118_regs.py b/host/lib/ic_reg_maps/gen_max2118_regs.py index 506fbaec8..01d7615de 100755 --- a/host/lib/ic_reg_maps/gen_max2118_regs.py +++ b/host/lib/ic_reg_maps/gen_max2118_regs.py @@ -38,28 +38,31 @@ n_divider_lsb 1[0:7] 0xB6 ######################################################################## ## R, Charge Pump, and VCO (2) Write ######################################################################## -#set $r_divider_names = ', '.join(map(lambda x: 'div' + str(2**(x+1)), range(0,8))) -r_divider 2[5:7] 1 $r_divider_names -#set $cp_current_bias = ', '.join(map(lambda x: 'i_cp_%dua'%(50*2**x), range(0,4))) -cp_current 2[3:4] 3 $cp_current_bias +<% r_divider_names = ', '.join(map(lambda x: 'div' + str(2**(x+1)), range(0,8))) %>\ +r_divider 2[5:7] 1 ${r_divider_names} +<% cp_current_bias = ', '.join(map(lambda x: 'i_cp_%dua'%(50*2**x), range(0,4))) %>\ +cp_current 2[3:4] 3 ${cp_current_bias} osc_band 2[0:2] 5 ######################################################################## ## I/Q Filter DAC (3) Write ######################################################################## ##unused 3[7] 0 -f_dac 3[0:6] 0x7F ## filter tuning dac, depends on m +## filter tuning dac, depends on m +f_dac 3[0:6] 0x7F ######################################################################## ## LPF Divider DAC (4) Write ######################################################################## adl_vco_adc_latch 4[7] 0 disabled, enabled ade_vco_ade_read 4[6] 0 disabled, enabled dl_output_drive 4[5] 0 iq_590m_vpp, iq_1_vpp -m_divider 4[0:4] 2 ## filter tuning counter +## filter tuning counter +m_divider 4[0:4] 2 ######################################################################## ## GC2 and Diag (5) Write ######################################################################## diag 5[5:7] 0 normal, cp_i_source, cp_i_sink, cp_high_z, unused, n_and_filt, r_and_gc2, m_div -gc2 5[0:4] 0x1F ## Step Size: 0-1: 0dB, 2-22: 1dB, 23-31: 0.5dB +## Step Size: 0-1: 0dB, 2-22: 1dB, 23-31: 0.5dB +gc2 5[0:4] 0x1F """ ######################################################################## @@ -71,11 +74,13 @@ READ_REGS_TMPL="""\ ## Status (0) Read ######################################################################## pwr 0[6] 0 not_reset, reset -adc 0[2:4] 0 ## VCO tuning voltage, Lock Status +## VCO tuning voltage, Lock Status +adc 0[2:4] 0 ######################################################################## ## I/Q Filter DAC (1) Read ######################################################################## -filter_dac 1[0:6] 0 ## I/Q Filter tuning DAC, current +## I/Q Filter tuning DAC, current +filter_dac 1[0:6] 0 """ ######################################################################## @@ -85,26 +90,26 @@ BODY_TMPL="""\ boost::uint8_t get_reg(boost::uint8_t addr){ boost::uint8_t reg = 0; switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint8_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint8_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } return boost::uint8_t(reg); } void set_reg(boost::uint8_t addr, boost::uint8_t reg){ switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - $reg.get_name() = $(reg.get_type())((reg >> $reg.get_shift()) & $reg.get_mask()); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + ${reg.get_name()} = ${reg.get_type()}((reg >> ${reg.get_shift()}) & ${reg.get_mask()}); + % endfor break; - #end for + % endfor } } """ diff --git a/host/lib/ic_reg_maps/gen_max2829_regs.py b/host/lib/ic_reg_maps/gen_max2829_regs.py index 383131c18..dbcb68ec9 100755 --- a/host/lib/ic_reg_maps/gen_max2829_regs.py +++ b/host/lib/ic_reg_maps/gen_max2829_regs.py @@ -112,13 +112,13 @@ BODY_TMPL="""\ boost::uint32_t get_reg(boost::uint8_t addr){ boost::uint16_t reg = 0; switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint16_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint16_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } return (boost::uint32_t(reg) << 4) | (addr & 0xf); } diff --git a/host/lib/ic_reg_maps/gen_max2870_regs.py b/host/lib/ic_reg_maps/gen_max2870_regs.py index f26c27281..af4e3c786 100644..100755 --- a/host/lib/ic_reg_maps/gen_max2870_regs.py +++ b/host/lib/ic_reg_maps/gen_max2870_regs.py @@ -28,8 +28,10 @@ REGS_TMPL="""\ ## Write-only, default = 0x007D0000 ######################################################################## int_n_mode 0x00[31] 0 frac_n, int_n -int_16_bit 0x00[15:30] 0x007D ##Integer divider: 16-65535 in int-N mode, 19-4091 in frac-N mode. -frac_12_bit 0x00[3:14] 0 ##Frac divider: 0-4095 +## Integer divider: 16-65535 in int-N mode, 19-4091 in frac-N mode. +int_16_bit 0x00[15:30] 0x007D +## Frac divider: 0-4095 +frac_12_bit 0x00[3:14] 0 ######################################################################## ## Address 0x01 ## Charge pump control @@ -38,8 +40,10 @@ frac_12_bit 0x00[3:14] 0 ##Frac divider: 0-4095 cpoc 0x01[31] 0 disabled, enabled cpl 0x01[29:30] 1 disabled, enabled, res1, res2 cpt 0x01[27:28] 0 normal, reserved, force_source, force_sink -phase_12_bit 0x01[15:26] 1 ##sets phase shift -mod_12_bit 0x01[3:14] 0xFFF ##VCO frac modulus +## sets phase shift +phase_12_bit 0x01[15:26] 1 +## VCO frac modulus +mod_12_bit 0x01[3:14] 0xFFF ######################################################################## ## Address 0x02 ## Misc. control @@ -50,10 +54,11 @@ low_noise_and_spur 0x02[29:30] 3 low_noise, reserved, low_spur_1, muxout 0x02[26:28] 1 tri_state, high, low, rdiv, ndiv, ald, dld, res7 reference_doubler 0x02[25] 0 disabled, enabled reference_divide_by_2 0x02[24] 0 disabled, enabled -r_counter_10_bit 0x02[14:23] 1 ##R divider value, 1-1023 +## R divider value, 1-1023 +r_counter_10_bit 0x02[14:23] 1 double_buffer 0x02[13] 0 disabled, enabled -#set $current_setting_enums = ', '.join(map(lambda x: '_'.join(("%0.2fma"%(1.631/5.1 * (1.+x))).split('.')), range(0,16))) -charge_pump_current 0x02[9:12] 7 $current_setting_enums +<% current_setting_enums = ', '.join(map(lambda x: '_'.join(("%0.2fma"%(1.631/5.1 * (1.+x))).split('.')), range(0,16))) %>\ +charge_pump_current 0x02[9:12] 7 ${current_setting_enums} ldf 0x02[8] 0 frac_n, int_n ldp 0x02[7] 0 10ns, 6ns pd_polarity 0x02[6] 1 negative, positive @@ -65,18 +70,22 @@ counter_reset 0x02[3] 0 normal, reset ## VCO control ## Write-only, default = 0x0000000B ######################################################################## -vco 0x03[26:31] 0 ##VCO subband selection, used when VAS disabledd -vas 0x03[25] 0 enabled, disabled ##VCO autoselect +## VCO subband selection, used when VAS disabledd +vco 0x03[26:31] 0 +## VCO autoselect +vas 0x03[25] 0 enabled, disabled retune 0x03[24] 1 disabled, enabled clock_div_mode 0x03[15:16] 0 clock_divider_off, fast_lock, phase, reserved -clock_divider_12_bit 0x03[3:14] 1 ##clock divider, 1-4095 +## clock divider, 1-4095 +clock_divider_12_bit 0x03[3:14] 1 ######################################################################## ## Address 0x04 ## RF output control ## Write-only, default = 0x6180B23C ######################################################################## res4 0x04[26:31] 0x18 -bs_msb 0x04[24:25] 0 ##Band select MSBs +## Band select MSBs +bs_msb 0x04[24:25] 0 feedback_select 0x04[23] 1 divided, fundamental rf_divider_select 0x04[20:22] 0 div1, div2, div4, div8, div16, div32, div64, div128 band_select_clock_div 0x04[12:19] 0 @@ -111,13 +120,13 @@ enum addr_t{ boost::uint32_t get_reg(boost::uint8_t addr){ boost::uint32_t reg = addr & 0x7; switch(addr){ - #for $addr in range(5+1) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in range(5+1): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint32_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } return reg; } diff --git a/host/lib/ic_reg_maps/gen_max2871_regs.py b/host/lib/ic_reg_maps/gen_max2871_regs.py index 338a019d8..f591c1636 100644..100755 --- a/host/lib/ic_reg_maps/gen_max2871_regs.py +++ b/host/lib/ic_reg_maps/gen_max2871_regs.py @@ -28,8 +28,10 @@ REGS_TMPL="""\ ## Write-only, default = 0x007D0000 ######################################################################## int_n_mode 0x00[31] 0 frac_n, int_n -int_16_bit 0x00[15:30] 0x007D ##Integer divider: 16-65535 in int-N mode, 19-4091 in frac-N mode. -frac_12_bit 0x00[3:14] 0 ##Frac divider: 0-4095 +## Integer divider: 16-65535 in int-N mode, 19-4091 in frac-N mode. +int_16_bit 0x00[15:30] 0x007D +## Frac divider: 0-4095 +frac_12_bit 0x00[3:14] 0 ######################################################################## ## Address 0x01 ## Charge pump control @@ -38,8 +40,10 @@ frac_12_bit 0x00[3:14] 0 ##Frac divider: 0-4095 res1 0x01[31] 0 cpl 0x01[29:30] 1 disabled, enabled, res1, res2 cpt 0x01[27:28] 0 normal, reserved, force_source, force_sink -phase_12_bit 0x01[15:26] 1 ##sets phase shift -mod_12_bit 0x01[3:14] 0xFFF ##VCO frac modulus +## sets phase shift +phase_12_bit 0x01[15:26] 1 +## VCO frac modulus +mod_12_bit 0x01[3:14] 0xFFF ######################################################################## ## Address 0x02 ## Misc. control @@ -50,10 +54,11 @@ low_noise_and_spur 0x02[29:30] 3 low_noise, reserved, low_spur_1, muxout 0x02[26:28] 0x6 tri_state, high, low, rdiv, ndiv, ald, dld, sync, res8, res9, res10, res11, spi, res13, res14, res15 reference_doubler 0x02[25] 0 disabled, enabled reference_divide_by_2 0x02[24] 0 disabled, enabled -r_counter_10_bit 0x02[14:23] 1 ##R divider value, 1-1023 +## R divider value, 1-1023 +r_counter_10_bit 0x02[14:23] 1 double_buffer 0x02[13] 0 disabled, enabled -#set $current_setting_enums = ', '.join(map(lambda x: '_'.join(("%0.2fma"%(1.631/5.1 * (1.+x))).split('.')), range(0,16))) -charge_pump_current 0x02[9:12] 7 $current_setting_enums +<% current_setting_enums = ', '.join(map(lambda x: '_'.join(("%0.2fma"%(1.631/5.1 * (1.+x))).split('.')), range(0,16))) %>\ +charge_pump_current 0x02[9:12] 7 ${current_setting_enums} ldf 0x02[8] 0 frac_n, int_n ldp 0x02[7] 0 10ns, 6ns pd_polarity 0x02[6] 1 negative, positive @@ -65,14 +70,17 @@ counter_reset 0x02[3] 0 normal, reset ## VCO control ## Write-only, default = 0x0000000B ######################################################################## -vco 0x03[26:31] 0 ##VCO subband selection, used when VAS disabledd -shutdown_vas 0x03[25] 0 enabled, disabled ##VCO autoselect +## VCO subband selection, used when VAS disabledd +vco 0x03[26:31] 0 +## VCO autoselect +shutdown_vas 0x03[25] 0 enabled, disabled retune 0x03[24] 1 disabled, enabled res3 0x3[19:23] 0 csm 0x3[18] 0 disabled, enabled mutedel 0x3[17] 0 disabled, enabled clock_div_mode 0x03[15:16] 0 clock_divider_off, fast_lock, phase, reserved -clock_divider_12_bit 0x03[3:14] 1 ##clock divider, 1-4095 +## clock divider, 1-4095 +clock_divider_12_bit 0x03[3:14] 1 ######################################################################## ## Address 0x04 ## RF output control @@ -82,7 +90,8 @@ res4 0x04[29:31] 0x3 shutdown_ldo 0x04[28] 0 enabled, disabled shutdown_div 0x04[27] 0 enabled, disabled shutdown_ref 0x04[26] 0 enabled, disabled -bs_msb 0x04[24:25] 0 ##Band select MSBs +## Band select MSBs +bs_msb 0x04[24:25] 0 feedback_select 0x04[23] 1 divided, fundamental rf_divider_select 0x04[20:22] 0 div1, div2, div4, div8, div16, div32, div64, div128 band_select_clock_div 0x04[12:19] 0 @@ -124,13 +133,13 @@ enum addr_t{ boost::uint32_t get_reg(boost::uint8_t addr){ boost::uint32_t reg = addr & 0x7; switch(addr){ - #for $addr in range(5+1) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in range(5+1): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint32_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } return reg; } diff --git a/host/lib/ic_reg_maps/gen_tda18272hnm_regs.py b/host/lib/ic_reg_maps/gen_tda18272hnm_regs.py index 677a201de..308d7d524 100755 --- a/host/lib/ic_reg_maps/gen_tda18272hnm_regs.py +++ b/host/lib/ic_reg_maps/gen_tda18272hnm_regs.py @@ -28,7 +28,7 @@ REGS_TMPL="""\ ######################################################################## ## ID_byte_1 (0x00) Read ######################################################################## -##reserved as 1 0x00[7] 1 +## reserved as 1 0x00[7] 1 ident_14_8 0x00[0:6] 0 ######################################################################## ## ID_byte_2 (0x01) Read @@ -43,23 +43,25 @@ minor_rev 0x02[0:3] 0 ######################################################################## ## Thermo_byte_1 (0x03) Read ######################################################################## -##reserved 0x03[7] 0 -tm_d 0x03[0:6] 0 ## 22-127deg C junction temp +## reserved 0x03[7] 0 +## 22-127deg C junction temp +tm_d 0x03[0:6] 0 ######################################################################## ## Thermo_byte_2 (0x04) Write ######################################################################## -##reserved 0x04[1:7] 0 +## reserved 0x04[1:7] 0 tm_on 0x04[0] 0 sensor_off, sensor_on ######################################################################## ## Power_state_byte_1 (0x05) Read ######################################################################## -##reserved 0x05[2:7] 0 +## reserved 0x05[2:7] 0 por 0x05[1] 0 read, reset lo_lock 0x05[0] 0 unlocked, locked ######################################################################## -## Power_state_byte_2 (0x06) Read/Write ## Standby modes +## Standby modes +## Power_state_byte_2 (0x06) Read/Write ######################################################################## -##reserved 0x06[4:7] 0 +## reserved 0x06[4:7] 0 sm 0x06[3] 0 normal, standby sm_pll 0x06[2] 0 on, off sm_lna 0x06[1] 0 on, off @@ -68,14 +70,15 @@ sm_lna 0x06[1] 0 on, off ######################################################################## ## Input_Power_Level_byte (0x07) Read ######################################################################## -##reserved 0x07[7] 0 -power_level 0x07[0:6] 0 ## 40dB_Vrms to 110dB_Vrms +## reserved 0x07[7] 0 +## 40dB_Vrms to 110dB_Vrms +power_level 0x07[0:6] 0 ## Trigger power level calculation with MSM_byte_1 and MSM_byte_2 ######################################################################## ## IRQ_status (0x08) Read/Write ######################################################################## irq_status 0x08[7] 0 cleared, set -##reserved 0x08[6] 0 +## reserved 0x08[6] 0 irq_xtalcal_end 0x08[5] 0 false, true irq_rssi_end 0x08[4] 0 false, true irq_localc_end 0x08[3] 0 false, true @@ -86,7 +89,7 @@ irq_rccal_end 0x08[0] 0 false, true ## IRQ_enable (0x09) Read/Write ######################################################################## irq_enable 0x09[7] 1 false, true -##reserved 0x09[6] 0 +## reserved 0x09[6] 0 irq_xtalcal_enable 0x09[5] 0 false, true irq_rssi_enable 0x09[4] 0 false, true irq_localc_enable 0x09[3] 0 false, true @@ -97,7 +100,7 @@ irq_rccal_enable 0x09[0] 0 false, true ## IRQ_clear (0x0a) Read/Write ######################################################################## irq_clear 0x0a[7] 0 false, true -##reserved 0x0a[6] 0 +## reserved 0x0a[6] 0 irq_xtalcal_clear 0x0a[5] 0 false, true irq_rssi_clear 0x0a[4] 0 false, true irq_localc_clear 0x0a[3] 0 false, true @@ -108,7 +111,7 @@ irq_rccal_clear 0x0a[0] 0 false, true ## IRQ_set (0x0b) Read ######################################################################## irq_set 0x0b[7] 0 false, true -##reserved 0x0b[6] 0 +## reserved 0x0b[6] 0 irq_xtalcal_set 0x0b[5] 0 false, true irq_rssi_set 0x0b[4] 0 false, true irq_localc_set 0x0b[3] 0 false, true @@ -120,12 +123,12 @@ irq_rccal_set 0x0b[0] 0 false, true ######################################################################## lt_enable 0x0c[7] 0 agc1_6_15db 0x0c[6] 1 -##reserved 0x0c[4:5] 0 +## reserved 0x0c[4:5] 0 agc1_top 0x0c[0:3] 0 ######################################################################## ## AGC2_byte_1 (0x0d) Read ######################################################################## -##reserved 0x0d[5:7] 0 +## reserved 0x0d[5:7] 0 agc2_top 0x0d[0:4] 0xf ######################################################################## ## AGCK_byte_1 (0x0e) Read/Write @@ -141,24 +144,25 @@ agck_mode 0x0e[0:1] 1 analog_tv=1, digital_tv=2 pd_rfagc_adapt 0x0f[7] 0 on, off rfagc_adapt_top 0x0f[5:6] 0 rfagc_low_bw 0x0f[4] 1 -rf_atten_3db 0x0f[3] 0 0db, 3db ## FIXME +## FIXME +rf_atten_3db 0x0f[3] 0 0db, 3db agc3_top 0x0f[0:2] 1 ######################################################################## ## IR_MIXER_byte_1 (0x10) Read/Write ######################################################################## -##reserved 0x10[4:7] 0 +## reserved 0x10[4:7] 0 agc4_top 0x10[0:3] 1 ######################################################################## ## AGC5_byte_1 (0x11) Read/Write ######################################################################## -##reserved 0x11[7] 0 +## reserved 0x11[7] 0 agcs_do_step_assym 0x11[5:6] 2 agc5_hpf 0x11[4] 1 off, on agc5_top 0x11[0:3] 1 ######################################################################## ## IF_AGC_byte (0x12) Read/Write ######################################################################## -##reserved 0x12[3:7] 0 +## reserved 0x12[3:7] 0 if_level 0x12[0:2] 0 0_5vpp=7, 0_6vpp=6, 0_7vpp=5, 0_85vpp=4, 0_8vpp=3, 1_0vpp=2, 1_25vpp=1, 2_0vpp=0 ######################################################################## ## IF_byte_1 (0x13) Read/Write @@ -172,18 +176,19 @@ lp_fc 0x13[0:2] 3 1_7mhz=4, 6_0mhz=0, 7_0mhz=1, 8_0mhz=2, ######################################################################## i2c_clock_mode 0x14[7] 0 digital_clock 0x14[6] 1 spread_off, spread_on -##reserved 0x14[5] 0 +## reserved 0x14[5] 0 xtalosc_anareg_en 0x14[4] 0 -##reserved 0x14[2:3] 0 +## reserved 0x14[2:3] 0 xtout 0x14[0:1] 0 no=0, 16mhz=3 ######################################################################## ## IF_Frequency_byte (0x15) Read/Write ######################################################################## -if_freq 0x15[0:7] 0 ## IF frequency = if_freq*50 (kHz) +## IF frequency = if_freq*50 (kHz) +if_freq 0x15[0:7] 0 ######################################################################## ## RF_Frequency_byte_1 (0x16) Read/Write ######################################################################## -##reserved 0x16[4:7] 0 +## reserved 0x16[4:7] 0 rf_freq_19_16 0x16[0:3] 0 ######################################################################## ## RF_Frequency_byte_2 (0x17) Read/Write @@ -209,7 +214,7 @@ calc_pll 0x19[0] 0 ######################################################################## ## MSM_byte_2 (0x1a) Read ######################################################################## -##reserved 0x1a[2:7] 0 +## reserved 0x1a[2:7] 0 xtalcal_launch 0x1a[1] 0 msm_launch 0x1a[0] 0 ######################################################################## @@ -227,11 +232,11 @@ psm_lodriver 0x1b[0:1] 0 dcc_bypass 0x1c[7] 0 dcc_slow 0x1c[6] 0 dcc_psm 0x1c[5] 0 -##reserved 0x1c[0:4] 0 +## reserved 0x1c[0:4] 0 ######################################################################## ## FLO_Max_byte (0x1d) Read ######################################################################## -##reserved 0x1d[6:7] 0 +## reserved 0x1d[6:7] 0 fmax_lo 0x1d[0:5] 0xA ######################################################################## ## IR_Cal_byte_1 (0x1e) Read @@ -249,12 +254,12 @@ ir_freqlow 0x1f[0:4] 0 ######################################################################## ## IR_Cal_byte_3 (0x20) Read ######################################################################## -##reserved 0x20[5:7] 0 +## reserved 0x20[5:7] 0 ir_freqmid 0x20[0:4] 0 ######################################################################## ## IR_Cal_byte_4 (0x21) Read ######################################################################## -##reserved 0x21[5:7] 0 +## reserved 0x21[5:7] 0 coarse_ir_freqhigh 0x21[4] 0 ir_freqhigh 0x21[0:3] 0 ######################################################################## @@ -270,8 +275,9 @@ agc_ovld_timer 0x22[0:1] 0 ######################################################################## ir_mixer_loop_off 0x23[7] 0 ir_mixer_do_step 0x23[5:6] 0 -##reserved 0x23[2:4] 0 -hi_pass 0x23[1] 0 disable, enable ## FIXME Logic Unclear +## reserved 0x23[2:4] 0 +## FIXME Logic Unclear +hi_pass 0x23[1] 0 disable, enable if_notch 0x23[0] 1 on, off ######################################################################## ## AGC1_byte_2 (0x24) Read @@ -285,9 +291,9 @@ agc1_gain 0x24[0:3] 8 ######################################################################## agc5_loop_off 0x25[7] 0 agc5_do_step 0x25[5:6] 0 -##reserved 0x25[4] 0 +## reserved 0x25[4] 0 force_agc5_gain 0x25[3] 0 -##reserved 0x25[2] 0 +## reserved 0x25[2] 0 agc5_gain 0x25[0:1] 2 ######################################################################## ## RF_Cal_byte_1 (0x26) Read @@ -335,7 +341,7 @@ rfcal_freq11 0x2b[0:1] 0 ## RF_Filter_byte_1 (0x2c) Read ######################################################################## rf_filter_bypass 0x2c[7] 0 -##reserved as 0 0x2c[6] 0 +## reserved as 0 0x2c[6] 0 agc2_loop_off 0x2c[5] 0 force_agc2_gain 0x2c[4] 0 rf_filter_gv 0x2c[2:3] 2 @@ -353,12 +359,12 @@ gain_taper 0x2e[0:5] 0 ## RF_Band_Pass_Filter_byte (0x2f) Read ######################################################################## rf_bpf_bypass 0x2f[7] 0 -##reserved 0x2f[3:6] 0 +## reserved 0x2f[3:6] 0 rf_bpf 0x2f[0:2] 0 ######################################################################## ## CP_Current_byte (0x30) Read ######################################################################## -##reserved 0x30[7] 0 +## reserved 0x30[7] 0 n_cp_current 0x30[0:6] 0x68 ######################################################################## ## AGC_Det_Out_byte (0x31) Read @@ -374,24 +380,26 @@ do_agc1 0x31[0] 0 ######################################################################## ## RF_AGC_Gain_byte_1 (0x32) Read ######################################################################## -#set $lna_gain_names = ', '.join(map(lambda x: {0: '', 1: 'm'}[3*x-12 < 0] + str(abs(3*x-12)) + 'db=' + str(x), range(0,10))) -##reserved 0x32[6:7] 0 +## reserved 0x32[6:7] 0 agc2_gain_read 0x32[4:5] 3 m11db, m8db, m5db, m2db -agc1_gain_read 0x32[0:3] 9 $lna_gain_names +<% lna_gain_names = ', '.join(map(lambda x: {0: '', 1: 'm'}[3*x-12 < 0] + str(abs(3*x-12)) + 'db=' + str(x), range(0,10))) %>\ +agc1_gain_read 0x32[0:3] 9 ${lna_gain_names} ######################################################################## ## RF_AGC_Gain_byte_2 (0x33) Read ######################################################################## -#set $top_agc3_read_names = ', '.join(map(lambda x: str(int(round(1.92*x+94))) + 'dbuvrms=' + str(x), range(0,8))) -##reserved 0x33[3:7] 0 -top_agc3_read 0x33[0:2] 0 $top_agc3_read_names +## reserved 0x33[3:7] 0 +<% top_agc3_read_names = ', '.join(map(lambda x: str(int(round(1.92*x+94))) + 'dbuvrms=' + str(x), range(0,8))) %>\ +top_agc3_read 0x33[0:2] 0 ${top_agc3_read_names} ######################################################################## ## IF_AGC_Gain_byte (0x34) Read ######################################################################## -#set $lpf_gain_names = ', '.join(map(lambda x: str(3*x) + 'db=' + str(x), range(0,4))) -#set $ir_mixer_names = ', '.join(map(lambda x: str(3*x+2) + 'db=' + str(x), range(0,5))) -##reserved 0x34[5:7] 0 -agc5_gain_read 0x34[3:4] 3 $lpf_gain_names -agc4_gain_read 0x34[0:2] 4 $ir_mixer_names +## reserved 0x34[5:7] 0 +<% + lpf_gain_names = ', '.join(map(lambda x: str(3*x) + 'db=' + str(x), range(0,4))) + ir_mixer_names = ', '.join(map(lambda x: str(3*x+2) + 'db=' + str(x), range(0,5))) +%>\ +agc5_gain_read 0x34[3:4] 3 ${lpf_gain_names} +agc4_gain_read 0x34[0:2] 4 ${ir_mixer_names} ######################################################################## ## Power_byte_1 (0x35) Read ######################################################################## @@ -399,9 +407,9 @@ rssi 0x35[0:7] 0 ######################################################################## ## Power_byte_2 (0x36) Read ######################################################################## -##reserved 0x36[6:7] 0 +## reserved 0x36[6:7] 0 rssi_av 0x36[5] 0 -##reserved 0x36[4] 0 +## reserved 0x36[4] 0 rssi_cap_reset_en 0x36[3] 1 rssi_cap_val 0x36[2] 1 rssi_ck_speed 0x36[1] 0 @@ -479,39 +487,30 @@ BODY_TMPL="""\ boost::uint8_t get_reg(boost::uint8_t addr){ boost::uint8_t reg = 0; switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint8_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint8_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } return boost::uint8_t(reg); } void set_reg(boost::uint8_t addr, boost::uint8_t reg){ switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - $reg.get_name() = $(reg.get_type())((reg >> $reg.get_shift()) & $reg.get_mask()); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + ${reg.get_name()} = ${reg.get_type()}((reg >> ${reg.get_shift()}) & ${reg.get_mask()}); + % endfor break; - #end for + % endfor } } """ -SPLIT_REGS_HELPER_TMPL="""\ -#for $divname in ['n','f'] -void set_$(divname)_divider(boost::uint32_t $divname){ - #for $regname in sorted(map(lambda r: r.get_name(), filter(lambda r: r.get_name().find(divname + '_divider') == 0, $regs))) - #end for -} -#end for -""" - if __name__ == '__main__': import common; common.generate( name='tda18272hnm_regs', diff --git a/host/lib/ic_reg_maps/gen_tuner_4937di5_regs.py b/host/lib/ic_reg_maps/gen_tuner_4937di5_regs.py index 73f7aa3db..9b8e1958f 100644..100755 --- a/host/lib/ic_reg_maps/gen_tuner_4937di5_regs.py +++ b/host/lib/ic_reg_maps/gen_tuner_4937di5_regs.py @@ -53,13 +53,13 @@ BODY_TMPL="""\ boost::uint8_t get_reg(boost::uint8_t addr){ boost::uint8_t reg = 0; switch(addr){ - #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) - case $addr: - #for $reg in filter(lambda r: r.get_addr() == addr, $regs) - reg |= (boost::uint8_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); - #end for + % for addr in sorted(set(map(lambda r: r.get_addr(), regs))): + case ${addr}: + % for reg in filter(lambda r: r.get_addr() == addr, regs): + reg |= (boost::uint8_t(${reg.get_name()}) & ${reg.get_mask()}) << ${reg.get_shift()}; + % endfor break; - #end for + % endfor } return boost::uint8_t(reg); } diff --git a/host/lib/image_loader.cpp b/host/lib/image_loader.cpp new file mode 100644 index 000000000..91dd325dd --- /dev/null +++ b/host/lib/image_loader.cpp @@ -0,0 +1,87 @@ +// +// Copyright 2014-2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <iostream> +#include <map> +#include <utility> + +#include <boost/filesystem.hpp> +#include <boost/foreach.hpp> +#include <boost/format.hpp> + +#include <uhd/exception.hpp> +#include <uhd/image_loader.hpp> +#include <uhd/utils/log.hpp> +#include <uhd/utils/msg.hpp> +#include <uhd/utils/static.hpp> + +namespace fs = boost::filesystem; + +typedef std::map<std::string, uhd::image_loader::loader_fcn_t> loader_fcn_map_t; +typedef std::map<std::string, std::string> string_map_t; + +// Nice typedefs for iterating over std::map +typedef std::pair<std::string, uhd::image_loader::loader_fcn_t> loader_fcn_pair_t; +typedef std::pair<std::string, std::string> string_pair_t; + +UHD_SINGLETON_FCN(loader_fcn_map_t, get_image_loaders); +UHD_SINGLETON_FCN(string_map_t, get_recovery_strings); + +/* + * Registration + */ +void uhd::image_loader::register_image_loader(const std::string &device_type, + const loader_fcn_t &loader_fcn, + const std::string &recovery_instructions){ + UHD_LOGV(always) << "Registering image loader and recovery instructions for " + << device_type << std::endl; + + get_image_loaders().insert(loader_fcn_pair_t(device_type, loader_fcn)); + get_recovery_strings().insert(string_pair_t(device_type, recovery_instructions)); +} + +/* + * Actual loading + */ +bool uhd::image_loader::load(const uhd::image_loader::image_loader_args_t &image_loader_args){ + + // If "type=foo" given in args, see if we have an image loader for that + if(image_loader_args.args.has_key("type")){ + std::string type = image_loader_args.args.get("type"); + if(get_image_loaders().find(type) == get_image_loaders().end()){ + throw uhd::runtime_error(str(boost::format("There is no image loader registered for given type \"%s\".") + % type)); + } + else return get_image_loaders().at(type)(image_loader_args); + } + else{ + BOOST_FOREACH(const loader_fcn_pair_t &loader_fcn_pair, get_image_loaders()){ + if(loader_fcn_pair.second(image_loader_args)) return true; + } + return false; + } +} + +/* + * Get recovery instructions for particular device + */ +std::string uhd::image_loader::get_recovery_instructions(const std::string &device_type){ + if(get_recovery_strings().count(device_type) == 0){ + return "A firmware or FPGA loading process was interrupted by the user. This can leave your device in a non-working state."; + } + else return get_recovery_strings().at(device_type); +} diff --git a/host/lib/transport/CMakeLists.txt b/host/lib/transport/CMakeLists.txt index 5920f3d78..9ec8a5c0b 100644 --- a/host/lib/transport/CMakeLists.txt +++ b/host/lib/transport/CMakeLists.txt @@ -129,6 +129,7 @@ LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/if_addrs.cpp ${CMAKE_CURRENT_SOURCE_DIR}/udp_simple.cpp ${CMAKE_CURRENT_SOURCE_DIR}/nirio_zero_copy.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/chdr.cpp ) # Verbose Debug output for send/recv diff --git a/host/lib/transport/chdr.cpp b/host/lib/transport/chdr.cpp new file mode 100644 index 000000000..632887e56 --- /dev/null +++ b/host/lib/transport/chdr.cpp @@ -0,0 +1,182 @@ +// +// Copyright 2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/transport/chdr.hpp> +#include <uhd/utils/byteswap.hpp> +#include <uhd/exception.hpp> + +//define the endian macros to convert integers +#ifdef BOOST_BIG_ENDIAN + #define BE_MACRO(x) (x) + #define LE_MACRO(x) uhd::byteswap(x) +#else + #define BE_MACRO(x) uhd::byteswap(x) + #define LE_MACRO(x) (x) +#endif + +using namespace uhd::transport::vrt; + +static const boost::uint32_t HDR_FLAG_TSF = (1 << 29); +static const boost::uint32_t HDR_FLAG_EOB = (1 << 28); +static const boost::uint32_t HDR_FLAG_ERROR = (1 << 28); + +/***************************************************************************/ +/* Packing */ +/***************************************************************************/ +/*! Translate the contents of \p if_packet_info into a 32-Bit word and return it. + */ +UHD_INLINE boost::uint32_t _hdr_pack_chdr( + if_packet_info_t &if_packet_info +) { + // Set fields in if_packet_info + if_packet_info.num_header_words32 = 2 + (if_packet_info.has_tsf ? 2 : 0); + if_packet_info.num_packet_words32 = + if_packet_info.num_header_words32 + + if_packet_info.num_payload_words32; + + boost::uint16_t pkt_length = + if_packet_info.num_payload_bytes + (4 * if_packet_info.num_header_words32); + boost::uint32_t chdr = 0 + // 2 Bits: Packet type + | (if_packet_info.packet_type << 30) + // 1 Bit: Has time + | (if_packet_info.has_tsf ? HDR_FLAG_TSF : 0) + // 1 Bit: EOB or Error + | ((if_packet_info.eob or if_packet_info.error) ? HDR_FLAG_EOB : 0) + // 12 Bits: Sequence number + | ((if_packet_info.packet_count & 0xFFF) << 16) + // 16 Bits: Total packet length + | pkt_length; + return chdr; +} + +void chdr::if_hdr_pack_be( + boost::uint32_t *packet_buff, + if_packet_info_t &if_packet_info +) { + // Write header and update if_packet_info + packet_buff[0] = BE_MACRO(_hdr_pack_chdr(if_packet_info)); + + // Write SID + packet_buff[1] = BE_MACRO(if_packet_info.sid); + + // Write time + if (if_packet_info.has_tsf) { + packet_buff[2] = BE_MACRO(boost::uint32_t(if_packet_info.tsf >> 32)); + packet_buff[3] = BE_MACRO(boost::uint32_t(if_packet_info.tsf >> 0)); + } +} + +void chdr::if_hdr_pack_le( + boost::uint32_t *packet_buff, + if_packet_info_t &if_packet_info +) { + // Write header and update if_packet_info + packet_buff[0] = LE_MACRO(_hdr_pack_chdr(if_packet_info)); + + // Write SID + packet_buff[1] = LE_MACRO(if_packet_info.sid); + + // Write time + if (if_packet_info.has_tsf) { + packet_buff[2] = LE_MACRO(boost::uint32_t(if_packet_info.tsf >> 32)); + packet_buff[3] = LE_MACRO(boost::uint32_t(if_packet_info.tsf >> 0)); + } +} + + +/***************************************************************************/ +/* Unpacking */ +/***************************************************************************/ +UHD_INLINE void _hdr_unpack_chdr( + const boost::uint32_t chdr, + if_packet_info_t &if_packet_info +) { + // Set constant members + if_packet_info.link_type = if_packet_info_t::LINK_TYPE_CHDR; + if_packet_info.has_cid = false; + if_packet_info.has_sid = true; + if_packet_info.has_tsi = false; + if_packet_info.has_tlr = false; + if_packet_info.sob = false; + + // Set configurable members + if_packet_info.has_tsf = (chdr & HDR_FLAG_TSF) > 0; + if_packet_info.packet_type = if_packet_info_t::packet_type_t((chdr >> 30) & 0x3); + if_packet_info.eob = (if_packet_info.packet_type == if_packet_info_t::PACKET_TYPE_DATA) + && ((chdr & HDR_FLAG_EOB) > 0); + if_packet_info.error = (if_packet_info.packet_type == if_packet_info_t::PACKET_TYPE_RESP) + && ((chdr & HDR_FLAG_ERROR) > 0); + if_packet_info.packet_count = (chdr >> 16) & 0xFFF; + + // Set packet length variables + if (if_packet_info.has_tsf) { + if_packet_info.num_header_words32 = 4; + } else { + if_packet_info.num_header_words32 = 2; + } + size_t pkt_size_bytes = (chdr & 0xFFFF); + size_t pkt_size_word32 = (pkt_size_bytes / 4) + ((pkt_size_bytes % 4) ? 1 : 0); + // Check lengths match: + if (pkt_size_word32 < if_packet_info.num_header_words32) { + throw uhd::value_error("Bad CHDR or invalid packet length"); + } + if (if_packet_info.num_packet_words32 < pkt_size_word32) { + throw uhd::value_error("Bad CHDR or packet fragment"); + } + if_packet_info.num_payload_bytes = pkt_size_bytes - (4 * if_packet_info.num_header_words32); + if_packet_info.num_payload_words32 = pkt_size_word32 - if_packet_info.num_header_words32; +} + +void chdr::if_hdr_unpack_be( + const boost::uint32_t *packet_buff, + if_packet_info_t &if_packet_info +) { + // Read header and update if_packet_info + boost::uint32_t chdr = BE_MACRO(packet_buff[0]); + _hdr_unpack_chdr(chdr, if_packet_info); + + // Read SID + if_packet_info.sid = BE_MACRO(packet_buff[1]); + + // Read time (has_tsf was updated earlier) + if (if_packet_info.has_tsf) { + if_packet_info.tsf = 0 + | boost::uint64_t(BE_MACRO(packet_buff[2])) << 32 + | BE_MACRO(packet_buff[3]); + } +} + +void chdr::if_hdr_unpack_le( + const boost::uint32_t *packet_buff, + if_packet_info_t &if_packet_info +) { + // Read header and update if_packet_info + boost::uint32_t chdr = LE_MACRO(packet_buff[0]); + _hdr_unpack_chdr(chdr, if_packet_info); + + // Read SID + if_packet_info.sid = LE_MACRO(packet_buff[1]); + + // Read time (has_tsf was updated earlier) + if (if_packet_info.has_tsf) { + if_packet_info.tsf = 0 + | boost::uint64_t(LE_MACRO(packet_buff[2])) << 32 + | LE_MACRO(packet_buff[3]); + } +} + diff --git a/host/lib/transport/gen_vrt_if_packet.py b/host/lib/transport/gen_vrt_if_packet.py index 98f6804ae..6723e3a4b 100644 --- a/host/lib/transport/gen_vrt_if_packet.py +++ b/host/lib/transport/gen_vrt_if_packet.py @@ -1,6 +1,6 @@ #!/usr/bin/env python # -# Copyright 2010-2013 Ettus Research LLC +# Copyright 2010-2013,2015 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -25,26 +25,25 @@ metatdata into vrt headers and vrt headers into metadata. The generated code infers jump tables to speed-up the parsing time. """ -TMPL_TEXT = """ -#import time +TMPL_TEXT = """<% import time %> /*********************************************************************** - * This file was generated by $file on $time.strftime("%c") + * This file was generated by ${file} on ${time.strftime("%c")} **********************************************************************/ -\#include <uhd/exception.hpp> -\#include <uhd/transport/vrt_if_packet.hpp> -\#include <uhd/utils/byteswap.hpp> -\#include <boost/detail/endian.hpp> -\#include <vector> +#include <uhd/exception.hpp> +#include <uhd/transport/vrt_if_packet.hpp> +#include <uhd/utils/byteswap.hpp> +#include <boost/detail/endian.hpp> +#include <vector> //define the endian macros to convert integers -\#ifdef BOOST_BIG_ENDIAN - \#define BE_MACRO(x) (x) - \#define LE_MACRO(x) uhd::byteswap(x) -\#else - \#define BE_MACRO(x) uhd::byteswap(x) - \#define LE_MACRO(x) (x) -\#endif +#ifdef BOOST_BIG_ENDIAN + #define BE_MACRO(x) (x) + #define LE_MACRO(x) uhd::byteswap(x) +#else + #define BE_MACRO(x) uhd::byteswap(x) + #define LE_MACRO(x) (x) +#endif using namespace uhd; using namespace uhd::transport; @@ -59,13 +58,13 @@ static pred_table_type get_pred_unpack_table(void) pred_table_type table(1 << 9, 0); //only 9 bits useful here (20-28) for (size_t i = 0; i < table.size(); i++){ boost::uint32_t vrt_hdr_word = i << 20; - if(vrt_hdr_word & $hex(0x1 << 28)) table[i] |= $hex($sid_p); - if(vrt_hdr_word & $hex(0x1 << 27)) table[i] |= $hex($cid_p); - if(vrt_hdr_word & $hex(0x3 << 22)) table[i] |= $hex($tsi_p); - if(vrt_hdr_word & $hex(0x3 << 20)) table[i] |= $hex($tsf_p); - if(vrt_hdr_word & $hex(0x1 << 26)) table[i] |= $hex($tlr_p); - if(vrt_hdr_word & $hex(0x1 << 24)) table[i] |= $hex($eob_p); - if(vrt_hdr_word & $hex(0x1 << 25)) table[i] |= $hex($sob_p); + if(vrt_hdr_word & ${hex(0x1 << 28)}) table[i] |= ${hex(sid_p)}; + if(vrt_hdr_word & ${hex(0x1 << 27)}) table[i] |= ${hex(cid_p)}; + if(vrt_hdr_word & ${hex(0x3 << 22)}) table[i] |= ${hex(tsi_p)}; + if(vrt_hdr_word & ${hex(0x3 << 20)}) table[i] |= ${hex(tsf_p)}; + if(vrt_hdr_word & ${hex(0x1 << 26)}) table[i] |= ${hex(tlr_p)}; + if(vrt_hdr_word & ${hex(0x1 << 24)}) table[i] |= ${hex(eob_p)}; + if(vrt_hdr_word & ${hex(0x1 << 25)}) table[i] |= ${hex(sob_p)}; } return table; } @@ -105,13 +104,12 @@ UHD_INLINE static boost::uint32_t vrt_to_chdr(const boost::uint32_t vrt, const i } ######################################################################## -#def gen_code($XE_MACRO, $suffix) +<%def name="gen_code(XE_MACRO, suffix)"> ######################################################################## - /*********************************************************************** - * interal impl of packing VRT IF header only + * internal impl of packing VRT IF header only **********************************************************************/ -UHD_INLINE void __if_hdr_pack_$(suffix)( +UHD_INLINE void __if_hdr_pack_${suffix}( boost::uint32_t *packet_buff, if_packet_info_t &if_packet_info, boost::uint32_t &vrt_hdr_word32 @@ -119,72 +117,53 @@ UHD_INLINE void __if_hdr_pack_$(suffix)( boost::uint32_t vrt_hdr_flags = 0; pred_type pred = 0; - if (if_packet_info.has_sid) pred |= $hex($sid_p); - if (if_packet_info.has_cid) pred |= $hex($cid_p); - if (if_packet_info.has_tsi) pred |= $hex($tsi_p); - if (if_packet_info.has_tsf) pred |= $hex($tsf_p); - if (if_packet_info.has_tlr) pred |= $hex($tlr_p); - if (if_packet_info.eob) pred |= $hex($eob_p); - if (if_packet_info.sob) pred |= $hex($sob_p); + if (if_packet_info.has_sid) pred |= ${hex(sid_p)}; + if (if_packet_info.has_cid) pred |= ${hex(cid_p)}; + if (if_packet_info.has_tsi) pred |= ${hex(tsi_p)}; + if (if_packet_info.has_tsf) pred |= ${hex(tsf_p)}; + if (if_packet_info.has_tlr) pred |= ${hex(tlr_p)}; + if (if_packet_info.eob) pred |= ${hex(eob_p)}; + if (if_packet_info.sob) pred |= ${hex(sob_p)}; switch(pred){ - #for $pred in range(2**7) - case $pred: - #set $num_header_words = 1 - #set $flags = 0 + % for pred in range(2**7): + case ${pred}:<% num_header_words = 1 %><% flags = 0 %> ########## Stream ID ########## - #if $pred & $sid_p - packet_buff[$num_header_words] = $(XE_MACRO)(if_packet_info.sid); - #set $num_header_words += 1 - #set $flags |= (0x1 << 28); - #end if + % if pred & sid_p: + packet_buff[${num_header_words}] = ${XE_MACRO}(if_packet_info.sid);<% num_header_words += 1 %><% flags |= (0x1 << 28) %> + % endif ########## Class ID ########## - #if $pred & $cid_p - packet_buff[$num_header_words] = 0; //not implemented - #set $num_header_words += 1 - packet_buff[$num_header_words] = 0; //not implemented - #set $num_header_words += 1 - #set $flags |= (0x1 << 27); - #end if + % if pred & cid_p: + packet_buff[${num_header_words}] = 0; //not implemented<% num_header_words += 1 %> + packet_buff[${num_header_words}] = 0; //not implemented<% num_header_words += 1 %><% flags |= (0x1 << 27) %> + % endif ########## Integer Time ########## - #if $pred & $tsi_p - packet_buff[$num_header_words] = $(XE_MACRO)(if_packet_info.tsi); - #set $num_header_words += 1 - #set $flags |= (0x3 << 22); - #end if + % if pred & tsi_p: + packet_buff[${num_header_words}] = ${XE_MACRO}(if_packet_info.tsi);<% num_header_words += 1 %><% flags |= (0x3 << 22) %> + % endif ########## Fractional Time ########## - #if $pred & $tsf_p - packet_buff[$num_header_words] = $(XE_MACRO)(boost::uint32_t(if_packet_info.tsf >> 32)); - #set $num_header_words += 1 - packet_buff[$num_header_words] = $(XE_MACRO)(boost::uint32_t(if_packet_info.tsf >> 0)); - #set $num_header_words += 1 - #set $flags |= (0x1 << 20); - #end if + % if pred & tsf_p: + packet_buff[${num_header_words}] = ${XE_MACRO}(boost::uint32_t(if_packet_info.tsf >> 32));<% num_header_words += 1 %> + packet_buff[${num_header_words}] = ${XE_MACRO}(boost::uint32_t(if_packet_info.tsf >> 0));<% num_header_words += 1 %><% flags |= (0x1 << 20) %> + % endif ########## Burst Flags ########## - #if $pred & $eob_p - #set $flags |= (0x1 << 24); - #end if - #if $pred & $sob_p - #set $flags |= (0x1 << 25); - #end if +<% if pred & eob_p: flags |= (0x1 << 24) %><% if pred & sob_p: flags |= (0x1 << 25) %> ########## Trailer ########## - #if $pred & $tlr_p + % if pred & tlr_p: { const size_t empty_bytes = if_packet_info.num_payload_words32*sizeof(boost::uint32_t) - if_packet_info.num_payload_bytes; if_packet_info.tlr = (0x3 << 22) | (occ_table[empty_bytes & 0x3] << 10); } - packet_buff[$num_header_words+if_packet_info.num_payload_words32] = $(XE_MACRO)(if_packet_info.tlr); - #set $flags |= (0x1 << 26); - #set $num_trailer_words = 1; - #else - #set $num_trailer_words = 0; - #end if + packet_buff[${num_header_words}+if_packet_info.num_payload_words32] = ${XE_MACRO}(if_packet_info.tlr);<% flags |= (0x1 << 26) %><% num_trailer_words = 1 %> + % else: +<% num_trailer_words = 0 %> + % endif ########## Variables ########## - if_packet_info.num_header_words32 = $num_header_words; - if_packet_info.num_packet_words32 = $($num_header_words + $num_trailer_words) + if_packet_info.num_payload_words32; - vrt_hdr_flags = $hex($flags); + if_packet_info.num_header_words32 = ${num_header_words}; + if_packet_info.num_packet_words32 = ${num_header_words + num_trailer_words} + if_packet_info.num_payload_words32; + vrt_hdr_flags = ${hex(flags)}; break; - #end for + % endfor } //fill in complete header word @@ -197,9 +176,9 @@ UHD_INLINE void __if_hdr_pack_$(suffix)( } /*********************************************************************** - * interal impl of unpacking VRT IF header only + * internal impl of unpacking VRT IF header only **********************************************************************/ -UHD_INLINE void __if_hdr_unpack_$(suffix)( +UHD_INLINE void __if_hdr_unpack_${suffix}( const boost::uint32_t *packet_buff, if_packet_info_t &if_packet_info, const boost::uint32_t vrt_hdr_word32 @@ -219,86 +198,78 @@ UHD_INLINE void __if_hdr_unpack_$(suffix)( size_t empty_bytes = 0; switch(pred){ - #for $pred in range(2**7) - case $pred: - #set $has_time_spec = False - #set $num_header_words = 1 + % for pred in range(2**7): + case ${pred}:<% has_time_spec = False %><% num_header_words = 1 %> ########## Stream ID ########## - #if $pred & $sid_p + % if pred & sid_p: if_packet_info.has_sid = true; - if_packet_info.sid = $(XE_MACRO)(packet_buff[$num_header_words]); - #set $num_header_words += 1 - #else + if_packet_info.sid = ${XE_MACRO}(packet_buff[${num_header_words}]);<% num_header_words += 1 %> + % else: if_packet_info.has_sid = false; - #end if + % endif ########## Class ID ########## - #if $pred & $cid_p + % if pred & cid_p: if_packet_info.has_cid = true; - if_packet_info.cid = 0; //not implemented - #set $num_header_words += 2 - #else + if_packet_info.cid = 0; //not implemented<% num_header_words += 2 %> + % else: if_packet_info.has_cid = false; - #end if + % endif ########## Integer Time ########## - #if $pred & $tsi_p + % if pred & tsi_p: if_packet_info.has_tsi = true; - if_packet_info.tsi = $(XE_MACRO)(packet_buff[$num_header_words]); - #set $num_header_words += 1 - #else + if_packet_info.tsi = ${XE_MACRO}(packet_buff[${num_header_words}]); +<% num_header_words += 1 %> + % else: if_packet_info.has_tsi = false; - #end if + % endif ########## Fractional Time ########## - #if $pred & $tsf_p + % if pred & tsf_p: if_packet_info.has_tsf = true; - if_packet_info.tsf = boost::uint64_t($(XE_MACRO)(packet_buff[$num_header_words])) << 32; - #set $num_header_words += 1 - if_packet_info.tsf |= $(XE_MACRO)(packet_buff[$num_header_words]); - #set $num_header_words += 1 - #else + if_packet_info.tsf = boost::uint64_t(${XE_MACRO}(packet_buff[${num_header_words}])) << 32;<% num_header_words += 1 %> + if_packet_info.tsf |= ${XE_MACRO}(packet_buff[${num_header_words}]);<% num_header_words += 1 %> + % else: if_packet_info.has_tsf = false; - #end if + % endif ########## Burst Flags ########## - #if $pred & $eob_p + % if pred & eob_p: if_packet_info.eob = true; - #else + % else: if_packet_info.eob = false; - #end if - #if $pred & $sob_p + % endif + % if pred & sob_p: if_packet_info.sob = true; - #else + % else: if_packet_info.sob = false; - #end if + % endif ########## Trailer ########## - #if $pred & $tlr_p + % if pred & tlr_p: if_packet_info.has_tlr = true; - if_packet_info.tlr = $(XE_MACRO)(packet_buff[packet_words32-1]); - #set $num_trailer_words = 1; + if_packet_info.tlr = ${XE_MACRO}(packet_buff[packet_words32-1]);<% num_trailer_words = 1 %> { const int indicators = (if_packet_info.tlr >> 20) & (if_packet_info.tlr >> 8); if ((indicators & (1 << 0)) != 0) if_packet_info.eob = true; if ((indicators & (1 << 1)) != 0) if_packet_info.sob = true; empty_bytes = occ_table[(indicators >> 2) & 0x3]; } - #else - if_packet_info.has_tlr = false; - #set $num_trailer_words = 0; - #end if + % else: + if_packet_info.has_tlr = false;<% num_trailer_words = 0 %> + % endif ########## Variables ########## //another failure case - if (packet_words32 < $($num_header_words + $num_trailer_words)) + if (packet_words32 < ${num_header_words + num_trailer_words}) throw uhd::value_error("bad vrt header or invalid packet length"); - if_packet_info.num_header_words32 = $num_header_words; - if_packet_info.num_payload_words32 = packet_words32 - $($num_header_words + $num_trailer_words); + if_packet_info.num_header_words32 = ${num_header_words}; + if_packet_info.num_payload_words32 = packet_words32 - ${num_header_words + num_trailer_words}; if_packet_info.num_payload_bytes = if_packet_info.num_payload_words32*sizeof(boost::uint32_t) - empty_bytes; break; - #end for + % endfor } } /*********************************************************************** * link layer + VRT IF packing **********************************************************************/ -void vrt::if_hdr_pack_$(suffix)( +void vrt::if_hdr_pack_${suffix}( boost::uint32_t *packet_buff, if_packet_info_t &if_packet_info ){ @@ -306,29 +277,29 @@ void vrt::if_hdr_pack_$(suffix)( switch (if_packet_info.link_type) { case if_packet_info_t::LINK_TYPE_NONE: - __if_hdr_pack_$(suffix)(packet_buff, if_packet_info, vrt_hdr_word32); - packet_buff[0] = $(XE_MACRO)(vrt_hdr_word32); + __if_hdr_pack_${suffix}(packet_buff, if_packet_info, vrt_hdr_word32); + packet_buff[0] = ${XE_MACRO}(vrt_hdr_word32); break; case if_packet_info_t::LINK_TYPE_CHDR: { - __if_hdr_pack_$(suffix)(packet_buff, if_packet_info, vrt_hdr_word32); + __if_hdr_pack_${suffix}(packet_buff, if_packet_info, vrt_hdr_word32); const boost::uint32_t chdr = vrt_to_chdr(vrt_hdr_word32, if_packet_info); - packet_buff[0] = $(XE_MACRO)(chdr); + packet_buff[0] = ${XE_MACRO}(chdr); break; } case if_packet_info_t::LINK_TYPE_VRLP: - __if_hdr_pack_$(suffix)(packet_buff+2, if_packet_info, vrt_hdr_word32); + __if_hdr_pack_${suffix}(packet_buff+2, if_packet_info, vrt_hdr_word32); if_packet_info.num_header_words32 += 2; if_packet_info.num_packet_words32 += 3; - packet_buff[0] = $(XE_MACRO)(VRLP); - packet_buff[1] = $(XE_MACRO)(boost::uint32_t( + packet_buff[0] = ${XE_MACRO}(VRLP); + packet_buff[1] = ${XE_MACRO}(boost::uint32_t( (if_packet_info.num_packet_words32 & 0xfffff) | ((if_packet_info.packet_count & 0xfff) << 20) )); - packet_buff[2] = $(XE_MACRO)(vrt_hdr_word32); - packet_buff[if_packet_info.num_packet_words32-1] = $(XE_MACRO)(VEND); + packet_buff[2] = ${XE_MACRO}(vrt_hdr_word32); + packet_buff[if_packet_info.num_packet_words32-1] = ${XE_MACRO}(VEND); break; } } @@ -336,7 +307,7 @@ void vrt::if_hdr_pack_$(suffix)( /*********************************************************************** * link layer + VRT IF unpacking **********************************************************************/ -void vrt::if_hdr_unpack_$(suffix)( +void vrt::if_hdr_unpack_${suffix}( const boost::uint32_t *packet_buff, if_packet_info_t &if_packet_info ){ @@ -344,16 +315,16 @@ void vrt::if_hdr_unpack_$(suffix)( switch (if_packet_info.link_type) { case if_packet_info_t::LINK_TYPE_NONE: - vrt_hdr_word32 = $(XE_MACRO)(packet_buff[0]); - __if_hdr_unpack_$(suffix)(packet_buff, if_packet_info, vrt_hdr_word32); + vrt_hdr_word32 = ${XE_MACRO}(packet_buff[0]); + __if_hdr_unpack_${suffix}(packet_buff, if_packet_info, vrt_hdr_word32); break; case if_packet_info_t::LINK_TYPE_CHDR: { - const boost::uint32_t chdr = $(XE_MACRO)(packet_buff[0]); + const boost::uint32_t chdr = ${XE_MACRO}(packet_buff[0]); vrt_hdr_word32 = chdr_to_vrt(chdr, if_packet_info); size_t packet_count = if_packet_info.packet_count; - __if_hdr_unpack_$(suffix)(packet_buff, if_packet_info, vrt_hdr_word32); + __if_hdr_unpack_${suffix}(packet_buff, if_packet_info, vrt_hdr_word32); if_packet_info.num_payload_bytes -= (~chdr + 1) & 0x3; if_packet_info.packet_count = packet_count; break; @@ -361,12 +332,12 @@ void vrt::if_hdr_unpack_$(suffix)( case if_packet_info_t::LINK_TYPE_VRLP: { - if ($(XE_MACRO)(packet_buff[0]) != VRLP) throw uhd::value_error("bad vrl header VRLP"); - const boost::uint32_t vrl_hdr = $(XE_MACRO)(packet_buff[1]); - vrt_hdr_word32 = $(XE_MACRO)(packet_buff[2]); + if (${XE_MACRO}(packet_buff[0]) != VRLP) throw uhd::value_error("bad vrl header VRLP"); + const boost::uint32_t vrl_hdr = ${XE_MACRO}(packet_buff[1]); + vrt_hdr_word32 = ${XE_MACRO}(packet_buff[2]); if (if_packet_info.num_packet_words32 < (vrl_hdr & 0xfffff)) throw uhd::value_error("bad vrl header or packet fragment"); - if ($(XE_MACRO)(packet_buff[(vrl_hdr & 0xfffff)-1]) != VEND) throw uhd::value_error("bad vrl trailer VEND"); - __if_hdr_unpack_$(suffix)(packet_buff+2, if_packet_info, vrt_hdr_word32); + if (${XE_MACRO}(packet_buff[(vrl_hdr & 0xfffff)-1]) != VEND) throw uhd::value_error("bad vrl trailer VEND"); + __if_hdr_unpack_${suffix}(packet_buff+2, if_packet_info, vrt_hdr_word32); if_packet_info.num_header_words32 += 2; //add vrl header if_packet_info.packet_count = (vrl_hdr >> 20) & 0xfff; break; @@ -375,16 +346,16 @@ void vrt::if_hdr_unpack_$(suffix)( } ######################################################################## -#end def +</%def> ######################################################################## -$gen_code("BE_MACRO", "be") -$gen_code("LE_MACRO", "le") +${gen_code("BE_MACRO", "be")} +${gen_code("LE_MACRO", "le")} """ def parse_tmpl(_tmpl_text, **kwargs): - from Cheetah.Template import Template - return str(Template(_tmpl_text, kwargs)) + from mako.template import Template + return Template(_tmpl_text).render(**kwargs) if __name__ == '__main__': import sys diff --git a/host/lib/transport/libusb1_base.cpp b/host/lib/transport/libusb1_base.cpp index ae33cc036..0baf8dc76 100644 --- a/host/lib/transport/libusb1_base.cpp +++ b/host/lib/transport/libusb1_base.cpp @@ -345,15 +345,21 @@ libusb::special_handle::sptr libusb::special_handle::make(device::sptr dev){ std::vector<usb_device_handle::sptr> usb_device_handle::get_device_list( boost::uint16_t vid, boost::uint16_t pid ){ - std::vector<usb_device_handle::sptr> handles; + return usb_device_handle::get_device_list(std::vector<usb_device_handle::vid_pid_pair_t>(1,usb_device_handle::vid_pid_pair_t(vid,pid))); +} +std::vector<usb_device_handle::sptr> usb_device_handle::get_device_list(const std::vector<usb_device_handle::vid_pid_pair_t>& vid_pid_pair_list) +{ + std::vector<usb_device_handle::sptr> handles; libusb::device_list::sptr dev_list = libusb::device_list::make(); - for (size_t i = 0; i < dev_list->size(); i++){ - usb_device_handle::sptr handle = libusb::special_handle::make(dev_list->at(i)); - if (handle->get_vendor_id() == vid and handle->get_product_id() == pid){ - handles.push_back(handle); - } + for(size_t iter = 0; iter < vid_pid_pair_list.size(); ++iter) + { + for (size_t i = 0; i < dev_list->size(); i++){ + usb_device_handle::sptr handle = libusb::special_handle::make(dev_list->at(i)); + if (handle->get_vendor_id() == vid_pid_pair_list[iter].first and handle->get_product_id() == vid_pid_pair_list[iter].second){ + handles.push_back(handle); + } + } } - return handles; } diff --git a/host/lib/transport/nirio/lvbitx/process-lvbitx.py b/host/lib/transport/nirio/lvbitx/process-lvbitx.py index ab9625608..7887c3997 100755 --- a/host/lib/transport/nirio/lvbitx/process-lvbitx.py +++ b/host/lib/transport/nirio/lvbitx/process-lvbitx.py @@ -1,6 +1,6 @@ #!/usr/bin/python # -# Copyright 2013-2014 Ettus Research LLC +# Copyright 2013-2015 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -35,7 +35,7 @@ parser.add_option("--output-src-path", type="string", dest="output_src_path", he # Args if (len(args) < 1): - print 'ERROR: Please specify the input LVBITX file name' + print('ERROR: Please specify the input LVBITX file name') sys.exit(1) lvbitx_filename = args[0] @@ -44,16 +44,16 @@ autogen_src_path = os.path.abspath(options.output_src_path) if (options.output_s class_name = os.path.splitext(os.path.basename(input_filename))[0] if (not os.path.isfile(input_filename)): - print 'ERROR: FPGA File ' + input_filename + ' could not be accessed or is not a file.' + print('ERROR: FPGA File ' + input_filename + ' could not be accessed or is not a file.') sys.exit(1) if (options.merge_bin is not None and not os.path.isfile(os.path.abspath(options.merge_bin))): - print 'ERROR: FPGA Bin File ' + options.merge_bin + ' could not be accessed or is not a file.' + print('ERROR: FPGA Bin File ' + options.merge_bin + ' could not be accessed or is not a file.') sys.exit(1) if (not os.path.exists(autogen_src_path)): - print 'ERROR: Output path ' + autogen_src_path + ' could not be accessed.' + print('ERROR: Output path ' + autogen_src_path + ' could not be accessed.') sys.exit(1) if (options.output_lvbitx_path is not None and input_filename == os.path.join(autogen_src_path, class_name + '.lvbitx')): - print 'ERROR: Input and output LVBITX files were the same. Choose a difference input file or output path.' + print('ERROR: Input and output LVBITX files were the same. Choose a difference input file or output path.') sys.exit(1) # Get XML Tree Node @@ -122,7 +122,7 @@ def map_SubType_to_ScalarType(SubType): elif SubType == 'U64': ScalarType = 'RIO_SCALAR_TYPE_UQ' else: - print 'ERROR: No corresponding nirio_scalar_type_t value for SubType ' + SubType + ' .' + print('ERROR: No corresponding nirio_scalar_type_t value for SubType ' + SubType + ' .') sys.exit(1) return ScalarType; @@ -187,7 +187,7 @@ codegen_transform['lvbitx_signature'] = str.upper(root.find('SignatureRegister') # Write BIN file bitstream = base64.b64decode(root.find('Bitstream').text) if (options.output_lvbitx_path is not None and hashlib.md5(bitstream).hexdigest() != root.find('BitstreamMD5').text): - print 'ERROR: The MD5 sum for the output LVBITX was incorrect. Make sure that the bitstream in the input LVBITX or BIN file is valid.' + print('ERROR: The MD5 sum for the output LVBITX was incorrect. Make sure that the bitstream in the input LVBITX or BIN file is valid.') sys.exit(1) if (options.output_bin): fpga_bin_file = open(os.path.join(options.output_lvbitx_path, class_name + '.bin'), 'w') diff --git a/host/lib/transport/nirio/rpc/rpc_client.cpp b/host/lib/transport/nirio/rpc/rpc_client.cpp index cf8e9c1a9..bbaf9f235 100644 --- a/host/lib/transport/nirio/rpc/rpc_client.cpp +++ b/host/lib/transport/nirio/rpc/rpc_client.cpp @@ -52,7 +52,7 @@ rpc_client::rpc_client ( //- address_configured: Only return addresses if a non-loopback address is configured for the system. //- numeric_host: No name resolution should be attempted for host //- numeric_service: No name resolution should be attempted for service - tcp::resolver::query::flags query_flags; + tcp::resolver::query::flags query_flags(tcp::resolver::query::passive); tcp::resolver::query query(tcp::v4(), server, port, query_flags); tcp::resolver::iterator iterator = resolver.resolve(query); diff --git a/host/lib/transport/super_recv_packet_handler.hpp b/host/lib/transport/super_recv_packet_handler.hpp index 5c84327a4..c3c2b8e97 100644 --- a/host/lib/transport/super_recv_packet_handler.hpp +++ b/host/lib/transport/super_recv_packet_handler.hpp @@ -147,7 +147,7 @@ public: */ void set_xport_chan_get_buff(const size_t xport_chan, const get_buff_type &get_buff, const bool flush = false){ if (flush){ - while (get_buff(0.0)); + while (get_buff(0.0)) {}; } _props.at(xport_chan).get_buff = get_buff; } diff --git a/host/lib/types/CMakeLists.txt b/host/lib/types/CMakeLists.txt index f19043c1e..5e97628f0 100644 --- a/host/lib/types/CMakeLists.txt +++ b/host/lib/types/CMakeLists.txt @@ -1,5 +1,5 @@ # -# Copyright 2011-2013 Ettus Research LLC +# Copyright 2011-2013,2015 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -86,8 +86,11 @@ LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/ranges.cpp ${CMAKE_CURRENT_SOURCE_DIR}/sensors.cpp ${CMAKE_CURRENT_SOURCE_DIR}/serial.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/sid.cpp ${CMAKE_CURRENT_SOURCE_DIR}/time_spec.cpp ${CMAKE_CURRENT_SOURCE_DIR}/tune.cpp ${CMAKE_CURRENT_SOURCE_DIR}/types.cpp ${CMAKE_CURRENT_SOURCE_DIR}/wb_iface.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/filters.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/byte_vector.cpp ) diff --git a/host/lib/types/byte_vector.cpp b/host/lib/types/byte_vector.cpp new file mode 100644 index 000000000..071cdb8cb --- /dev/null +++ b/host/lib/types/byte_vector.cpp @@ -0,0 +1,42 @@ +// +// Copyright 2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/foreach.hpp> + +#include <uhd/types/byte_vector.hpp> + +namespace uhd{ + +std::string bytes_to_string(const byte_vector_t &bytes){ + std::string out; + BOOST_FOREACH(boost::uint8_t byte, bytes){ + if (byte < 32 or byte > 127) return out; + out += byte; + } + return out; +} + +byte_vector_t string_to_bytes(const std::string &str, size_t max_length){ + byte_vector_t bytes; + for (size_t i = 0; i < std::min(str.size(), max_length); i++){ + bytes.push_back(str[i]); + } + if (bytes.size() < max_length - 1) bytes.push_back('\0'); + return bytes; +} + +} /* namespace uhd */ diff --git a/host/lib/types/filters.cpp b/host/lib/types/filters.cpp new file mode 100644 index 000000000..4ee06491f --- /dev/null +++ b/host/lib/types/filters.cpp @@ -0,0 +1,74 @@ +// +// Copyright 2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/types/filters.hpp> + +using namespace uhd; + +std::ostream& uhd::operator<<(std::ostream& os, filter_info_base& f) +{ + return os << f.to_pp_string(); +} + +std::string filter_info_base::to_pp_string() +{ + std::ostringstream os; + os << "[filter_info_base]" << std::endl; + switch(_type){ + case ANALOG_LOW_PASS: + os << "type: " << "Analog Low-pass" << std::endl; + break; + case ANALOG_BAND_PASS: + os << "type: " << "Analog Band-pass" << std::endl; + break; + case DIGITAL_I16: + os << "type: " << "Digital (i16)" << std::endl; + break; + case DIGITAL_FIR_I16: + os << "type: " << "Digital FIR (i16)" << std::endl; + break; + default: + os << "type: " << "Unknown type!" << std::endl; + break; + } + + os << "bypass enable: " << _bypass << std::endl + <<"position index: " << _position_index << std::endl; + + std::string str = os.str(); + return str; +} + +std::string analog_filter_base::to_pp_string() +{ + std::ostringstream os; + os << filter_info_base::to_pp_string() << + "\t[analog_filter_base]" << std::endl << + "\tdesc: " << _analog_type << std::endl; + return std::string(os.str()); + +} + +std::string analog_filter_lp::to_pp_string() +{ + std::ostringstream os; + os << analog_filter_base::to_pp_string() << + "\t\t[analog_filter_lp]" << std::endl << + "\t\tcutoff: " << _cutoff << std::endl << + "\t\trolloff: " << _rolloff << std::endl; + return std::string(os.str()); +} diff --git a/host/lib/types/sid.cpp b/host/lib/types/sid.cpp new file mode 100644 index 000000000..2fc3781cf --- /dev/null +++ b/host/lib/types/sid.cpp @@ -0,0 +1,153 @@ +// +// Copyright 2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/format.hpp> +#include <boost/regex.hpp> +#include <boost/lexical_cast.hpp> +#include <uhd/exception.hpp> +#include <uhd/types/sid.hpp> +#include <uhd/utils/cast.hpp> + +using namespace uhd; + +sid_t::sid_t() + : _sid(0x0000), _set(false) +{ +} + +sid_t::sid_t(boost::uint32_t sid) + : _sid(sid), _set(true) +{ +} + +sid_t::sid_t(boost::uint8_t src_addr, boost::uint8_t src_ep, boost::uint8_t dst_addr, boost::uint8_t dst_ep) + : _sid(0x0000), _set(true) +{ + set_src_addr(src_addr); + set_src_endpoint(src_ep); + set_dst_addr(dst_addr); + set_dst_endpoint(dst_ep); +} + +sid_t::sid_t(const std::string &sid_str) + : _sid(0x0000), _set(false) +{ + set_from_str(sid_str); +} + +std::string sid_t::to_pp_string() const +{ + if (not _set) { + return "x.x>x.x"; + } + return str(boost::format("%d.%d>%d.%d") + % get_src_addr() + % get_src_endpoint() + % get_dst_addr() + % get_dst_endpoint() + ); +} + +std::string sid_t::to_pp_string_hex() const +{ + if (not _set) { + return "xx:xx>xx:xx"; + } + return str(boost::format("%02x:%02x>%02x:%02x") + % get_src_addr() + % get_src_endpoint() + % get_dst_addr() + % get_dst_endpoint() + ); +} + + +void sid_t::set_sid(boost::uint32_t new_sid) +{ + _set = true; + _sid = new_sid; +} + +void sid_t::set_from_str(const std::string &sid_str) +{ + const std::string dec_regex = "(\\d{1,3})\\.(\\d{1,3})[.:/><](\\d{1,3})\\.(\\d{1,3})"; + const std::string hex_regex = "([[:xdigit:]]{2}):([[:xdigit:]]{2})[.:/><]([[:xdigit:]]{2}):([[:xdigit:]]{2})"; + + boost::cmatch matches; + if (boost::regex_match(sid_str.c_str(), matches, boost::regex(dec_regex))) { + set_src_addr(boost::lexical_cast<size_t>(matches[1])); + set_src_endpoint(boost::lexical_cast<size_t>(matches[2])); + set_dst_addr(boost::lexical_cast<size_t>(matches[3])); + set_dst_endpoint(boost::lexical_cast<size_t>(matches[4])); + return; + } + + if (boost::regex_match(sid_str.c_str(), matches, boost::regex(hex_regex))) { + set_src_addr(uhd::cast::hexstr_cast<size_t>(matches[1])); + set_src_endpoint(uhd::cast::hexstr_cast<size_t>(matches[2])); + set_dst_addr(uhd::cast::hexstr_cast<size_t>(matches[3])); + set_dst_endpoint(uhd::cast::hexstr_cast<size_t>(matches[4])); + return; + } + + throw uhd::value_error(str(boost::format("Invalid SID representation: %s") % sid_str)); +} + +void sid_t::set_src(boost::uint32_t new_addr) { + set_sid((_sid & 0x0000FFFF) | ((new_addr & 0xFFFF) << 16)); +} + +void sid_t::set_dst(boost::uint32_t new_addr) { + set_sid((_sid & 0xFFFF0000) | (new_addr & 0xFFFF)); +} + +void sid_t::set_src_addr(boost::uint32_t new_addr) { + set_sid((_sid & 0x00FFFFFF) | ((new_addr & 0xFF) << 24)); +} + +void sid_t::set_src_endpoint(boost::uint32_t new_addr) { + set_sid((_sid & 0xFF00FFFF) | ((new_addr & 0xFF) << 16)); +} + +void sid_t::set_dst_addr(boost::uint32_t new_addr) { + set_sid((_sid & 0xFFFF00FF) | ((new_addr & 0xFF) << 8)); +} + +void sid_t::set_dst_endpoint(boost::uint32_t new_addr) { + set_sid((_sid & 0xFFFFFF00) | ((new_addr & 0xFF) << 0)); +} + +void sid_t::set_dst_xbarport(boost::uint32_t new_xbarport) +{ + set_sid((_sid & 0xFFFFFF0F) | ((new_xbarport & 0xF) << 4)); +} + +void sid_t::set_dst_blockport(boost::uint32_t new_blockport) +{ + set_sid((_sid & 0xFFFFFFF0) | ((new_blockport & 0xF) << 0)); +} + +sid_t sid_t::reversed() +{ + return sid_t((get_dst() << 16) | get_src()); +} + +void sid_t::reverse() +{ + set_sid((get_dst() << 16) | get_src()); +} + diff --git a/host/lib/usrp/b200/CMakeLists.txt b/host/lib/usrp/b200/CMakeLists.txt index ce89b5d80..cd8ebcba7 100644 --- a/host/lib/usrp/b200/CMakeLists.txt +++ b/host/lib/usrp/b200/CMakeLists.txt @@ -26,6 +26,7 @@ LIBUHD_REGISTER_COMPONENT("B200" ENABLE_B200 ON "ENABLE_LIBUHD;ENABLE_USB" OFF) IF(ENABLE_B200) LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/b200_image_loader.cpp ${CMAKE_CURRENT_SOURCE_DIR}/b200_impl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/b200_iface.cpp ${CMAKE_CURRENT_SOURCE_DIR}/b200_io_impl.cpp diff --git a/host/lib/usrp/b200/b200_iface.cpp b/host/lib/usrp/b200/b200_iface.cpp index 270d3bb4b..4754a6357 100644 --- a/host/lib/usrp/b200/b200_iface.cpp +++ b/host/lib/usrp/b200/b200_iface.cpp @@ -511,7 +511,7 @@ public: throw uhd::io_error((boost::format("Short write on set FPGA hash (expecting: %d, returned: %d)") % bytes_to_send % ret).str()); } - boost::uint32_t load_fpga(const std::string filestring) { + boost::uint32_t load_fpga(const std::string filestring, bool force) { boost::uint8_t fx3_state = 0; boost::uint32_t wait_count; @@ -522,7 +522,7 @@ public: hash_type hash = generate_hash(filename); hash_type loaded_hash; usrp_get_fpga_hash(loaded_hash); - if (hash == loaded_hash) return 0; + if (hash == loaded_hash and !force) return 0; // Establish default largest possible control request transfer size based on operating USB speed int transfer_size = VREQ_DEFAULT_SIZE; diff --git a/host/lib/usrp/b200/b200_iface.hpp b/host/lib/usrp/b200/b200_iface.hpp index 1d123439a..0c7ee6b9e 100644 --- a/host/lib/usrp/b200/b200_iface.hpp +++ b/host/lib/usrp/b200/b200_iface.hpp @@ -97,7 +97,7 @@ public: virtual void set_fpga_reset_pin(const bool reset) = 0; //! load an FPGA image - virtual boost::uint32_t load_fpga(const std::string filestring) = 0; + virtual boost::uint32_t load_fpga(const std::string filestring, bool force=false) = 0; virtual void write_eeprom(boost::uint16_t addr, boost::uint16_t offset, const uhd::byte_vector_t &bytes) = 0; diff --git a/host/lib/usrp/b200/b200_image_loader.cpp b/host/lib/usrp/b200/b200_image_loader.cpp new file mode 100644 index 000000000..87010244c --- /dev/null +++ b/host/lib/usrp/b200/b200_image_loader.cpp @@ -0,0 +1,125 @@ +// +// Copyright 2014-2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/assign.hpp> +#include <boost/foreach.hpp> +#include <boost/lexical_cast.hpp> + +#include <uhd/exception.hpp> +#include <uhd/image_loader.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/usrp/mboard_eeprom.hpp> +#include <uhd/utils/paths.hpp> +#include <uhd/utils/static.hpp> + +#include "b200_iface.hpp" +#include "b200_impl.hpp" + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; + +namespace uhd{ + +static b200_iface::sptr get_b200_iface(const image_loader::image_loader_args_t &image_loader_args, + mboard_eeprom_t &mb_eeprom, + bool user_specified){ + + std::vector<usb_device_handle::sptr> dev_handles = get_b200_device_handles(image_loader_args.args); + b200_iface::sptr iface; + + if(dev_handles.size() > 0){ + BOOST_FOREACH(usb_device_handle::sptr dev_handle, dev_handles){ + if(dev_handle->firmware_loaded()){ + iface = b200_iface::make(usb_control::make(dev_handle,0)); + mb_eeprom = mboard_eeprom_t(*iface, "B200"); + if(user_specified){ + if(image_loader_args.args.has_key("serial") and + mb_eeprom.get("serial") != image_loader_args.args.get("serial")){ + continue; + } + if(image_loader_args.args.has_key("name") and + mb_eeprom.get("name") != image_loader_args.args.get("name")){ + continue; + } + return iface; + } + else return iface; // Just return first found + } + } + } + + // No applicable devices found, return empty sptr so we can exit + iface.reset(); + mb_eeprom = mboard_eeprom_t(); + return iface; +} + +static bool b200_image_loader(const image_loader::image_loader_args_t &image_loader_args){ + if(!image_loader_args.load_fpga) + return false; + + bool user_specified = (image_loader_args.args.has_key("serial") or + image_loader_args.args.has_key("name")); + + // See if a B2x0 with the given args is found + mboard_eeprom_t mb_eeprom; + b200_iface::sptr iface = get_b200_iface(image_loader_args, mb_eeprom, user_specified); + if(!iface) return false; // No initialized B2x0 found + + std::string fpga_path; + if(image_loader_args.fpga_path == ""){ + /* + * Normally, we can auto-generate the FPGA filename from what's in the EEPROM, + * but if the applicable value is not in the EEPROM, the user must give a specific + * filename for us to use. + */ + std::string product = mb_eeprom.get("product"); + if(not B2X0_PRODUCT_ID.has_key(boost::lexical_cast<boost::uint16_t>(product))){ + if(user_specified){ + // The user specified a bad device but expects us to know what it is + throw uhd::runtime_error("Could not determine model. You must manually specify an FPGA image filename."); + } + else{ + return false; + } + } + else{ + fpga_path = find_image_path(B2X0_FPGA_FILE_NAME.get(get_b200_type(mb_eeprom))); + } + } + else fpga_path = image_loader_args.fpga_path; + + std::cout << boost::format("Unit: USRP %s (%s)") + % B2X0_STR_NAMES.get(get_b200_type(mb_eeprom), "B2XX") + % mb_eeprom.get("serial") + << std::endl; + + iface->load_fpga(fpga_path, true); + + return true; +} + +UHD_STATIC_BLOCK(register_b200_image_loader){ + std::string recovery_instructions = "This device is likely in an unusable state. Power-cycle the\n" + "device, and the firmware/FPGA will be reloaded the next time\n" + "UHD uses the device."; + + image_loader::register_image_loader("b200", b200_image_loader, recovery_instructions); +} + +} /* namespace uhd */ diff --git a/host/lib/usrp/b200/b200_impl.cpp b/host/lib/usrp/b200/b200_impl.cpp index 0409adf30..17086de02 100644 --- a/host/lib/usrp/b200/b200_impl.cpp +++ b/host/lib/usrp/b200/b200_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2012-2014 Ettus Research LLC +// Copyright 2012-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -76,7 +76,7 @@ public: //! Look up the type of B-Series device we're currently running. // If the product ID stored in mb_eeprom is invalid, throws a // uhd::runtime_error. -static b200_type_t get_b200_type(const mboard_eeprom_t &mb_eeprom) +b200_type_t get_b200_type(const mboard_eeprom_t &mb_eeprom) { if (mb_eeprom["product"].empty()) { throw uhd::runtime_error("B200: Missing product ID on EEPROM."); @@ -91,6 +91,21 @@ static b200_type_t get_b200_type(const mboard_eeprom_t &mb_eeprom) return B2X0_PRODUCT_ID[product_id]; } +std::vector<usb_device_handle::sptr> get_b200_device_handles(const device_addr_t &hint) +{ + std::vector<usb_device_handle::vid_pid_pair_t> vid_pid_pair_list; + + if(hint.has_key("vid") && hint.has_key("pid") && hint.has_key("type") && hint["type"] == "b200") { + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(uhd::cast::hexstr_cast<boost::uint16_t>(hint.get("vid")), + uhd::cast::hexstr_cast<boost::uint16_t>(hint.get("pid")))); + } else { + vid_pid_pair_list = b200_vid_pid_pairs; + } + + //find the usrps and load firmware + return usb_device_handle::get_device_list(vid_pid_pair_list); +} + static device_addrs_t b200_find(const device_addr_t &hint) { device_addrs_t b200_addrs; @@ -104,25 +119,14 @@ static device_addrs_t b200_find(const device_addr_t &hint) if (hint_i.has_key("addr") || hint_i.has_key("resource")) return b200_addrs; } - boost::uint16_t vid, pid; - - if(hint.has_key("vid") && hint.has_key("pid") && hint.has_key("type") && hint["type"] == "b200") { - vid = uhd::cast::hexstr_cast<boost::uint16_t>(hint.get("vid")); - pid = uhd::cast::hexstr_cast<boost::uint16_t>(hint.get("pid")); - } else { - vid = B200_VENDOR_ID; - pid = B200_PRODUCT_ID; - } - // Important note: // The get device list calls are nested inside the for loop. // This allows the usb guts to decontruct when not in use, // so that re-enumeration after fw load can occur successfully. // This requirement is a courtesy of libusb1.0 on windows. - - //find the usrps and load firmware size_t found = 0; - BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) { + std::vector<usb_device_handle::sptr> b200_device_handles = get_b200_device_handles(hint); + BOOST_FOREACH(usb_device_handle::sptr handle, b200_device_handles) { //extract the firmware path for the b200 std::string b200_fw_image; try{ @@ -153,7 +157,7 @@ static device_addrs_t b200_find(const device_addr_t &hint) //search for the device until found or timeout while (boost::get_system_time() < timeout_time and b200_addrs.empty() and found != 0) { - BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) + BOOST_FOREACH(usb_device_handle::sptr handle, b200_device_handles) { usb_control::sptr control; try{control = usb_control::make(handle, 0);} @@ -213,13 +217,50 @@ b200_impl::b200_impl(const device_addr_t &device_addr) : //try to match the given device address with something on the USB bus boost::uint16_t vid = B200_VENDOR_ID; boost::uint16_t pid = B200_PRODUCT_ID; + bool specified_vid = false; + bool specified_pid = false; + if (device_addr.has_key("vid")) + { vid = uhd::cast::hexstr_cast<boost::uint16_t>(device_addr.get("vid")); + specified_vid = true; + } + if (device_addr.has_key("pid")) + { pid = uhd::cast::hexstr_cast<boost::uint16_t>(device_addr.get("pid")); + specified_pid = true; + } - std::vector<usb_device_handle::sptr> device_list = - usb_device_handle::get_device_list(vid, pid); + std::vector<usb_device_handle::vid_pid_pair_t> vid_pid_pair_list;//search list for devices. + + // Search only for specified VID and PID if both specified + if (specified_vid && specified_pid) + { + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(vid,pid)); + } + // Search for all supported PIDs limited to specified VID if only VID specified + else if (specified_vid) + { + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(vid,B200_PRODUCT_ID)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(vid,B200_PRODUCT_NI_ID)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(vid,B210_PRODUCT_NI_ID)); + } + // Search for all supported VIDs limited to specified PID if only PID specified + else if (specified_pid) + { + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_ID,pid)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_NI_ID,pid)); + } + // Search for all supported devices if neither VID nor PID specified + else + { + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_ID,B200_PRODUCT_ID)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_NI_ID,B200_PRODUCT_NI_ID)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_NI_ID,B210_PRODUCT_NI_ID)); + } + + std::vector<usb_device_handle::sptr> device_list = usb_device_handle::get_device_list(vid_pid_pair_list); //locate the matching handle in the device list usb_device_handle::sptr handle; @@ -447,6 +488,7 @@ b200_impl::b200_impl(const device_addr_t &device_addr) : .publish(boost::bind(&b200_impl::get_tick_rate, this)) .subscribe(boost::bind(&b200_impl::update_tick_rate, this, _1)); _tree->create<time_spec_t>(mb_path / "time" / "cmd"); + _tree->create<bool>(mb_path / "auto_tick_rate").set(false); //////////////////////////////////////////////////////////////////// // and do the misc mboard sensors @@ -512,6 +554,19 @@ b200_impl::b200_impl(const device_addr_t &device_addr) : _tree->create<std::vector<std::string> >(mb_path / "clock_source" / "options").set(clock_sources); //////////////////////////////////////////////////////////////////// + // front panel gpio + //////////////////////////////////////////////////////////////////// + _radio_perifs[0].fp_gpio = gpio_core_200::make(_radio_perifs[0].ctrl, TOREG(SR_FP_GPIO), RB32_FP_GPIO); + BOOST_FOREACH(const gpio_attr_map_t::value_type attr, gpio_attr_map) + { + _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / attr.second) + .set(0) + .subscribe(boost::bind(&b200_impl::set_fp_gpio, this, _radio_perifs[0].fp_gpio, attr.first, _1)); + } + _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / "READBACK") + .publish(boost::bind(&b200_impl::get_fp_gpio, this, _radio_perifs[0].fp_gpio)); + + //////////////////////////////////////////////////////////////////// // dboard eeproms but not really //////////////////////////////////////////////////////////////////// dboard_eeprom_t db_eeprom; @@ -549,6 +604,11 @@ b200_impl::b200_impl(const device_addr_t &device_addr) : _radio_perifs[i].ddc->set_host_rate(default_tick_rate / B200_DEFAULT_DECIM); _radio_perifs[i].duc->set_host_rate(default_tick_rate / B200_DEFAULT_INTERP); } + // We can automatically choose a master clock rate, but not if the user specifies one + _tree->access<bool>(mb_path / "auto_tick_rate").set(not device_addr.has_key("master_clock_rate")); + if (not device_addr.has_key("master_clock_rate")) { + UHD_MSG(status) << "Setting master clock rate selection to 'automatic'." << std::endl; + } //GPS installed: use external ref, time, and init time spec if (_gps and _gps->gps_detected()) @@ -613,7 +673,7 @@ void b200_impl::setup_radio(const size_t dspno) .publish(boost::bind(&rx_dsp_core_3000::get_host_rates, perif.ddc)); _tree->create<double>(rx_dsp_path / "rate" / "value") .set(0.0) // We can only load a sensible value after the tick rate was set - .coerce(boost::bind(&rx_dsp_core_3000::set_host_rate, perif.ddc, _1)) + .coerce(boost::bind(&b200_impl::coerce_rx_samp_rate, this, perif.ddc, dspno, _1)) .subscribe(boost::bind(&b200_impl::update_rx_samp_rate, this, dspno, _1)) ; _tree->create<double>(rx_dsp_path / "freq" / "value") @@ -638,7 +698,7 @@ void b200_impl::setup_radio(const size_t dspno) .publish(boost::bind(&tx_dsp_core_3000::get_host_rates, perif.duc)); _tree->create<double>(tx_dsp_path / "rate" / "value") .set(0.0) // We can only load a sensible value after the tick rate was set - .coerce(boost::bind(&tx_dsp_core_3000::set_host_rate, perif.duc, _1)) + .coerce(boost::bind(&b200_impl::coerce_tx_samp_rate, this, perif.duc, dspno, _1)) .subscribe(boost::bind(&b200_impl::update_tx_samp_rate, this, dspno, _1)) ; _tree->create<double>(tx_dsp_path / "freq" / "value") @@ -682,7 +742,7 @@ void b200_impl::setup_radio(const size_t dspno) _tree->create<bool>(rf_fe_path / "use_lo_offset").set(false); _tree->create<double>(rf_fe_path / "bandwidth" / "value") .coerce(boost::bind(&ad9361_ctrl::set_bw_filter, _codec_ctrl, key, _1)) - .set(40e6); + .set(56e6); _tree->create<meta_range_t>(rf_fe_path / "bandwidth" / "range") .publish(boost::bind(&ad9361_ctrl::get_bw_filter_range, key)); _tree->create<double>(rf_fe_path / "freq" / "value") @@ -692,8 +752,29 @@ void b200_impl::setup_radio(const size_t dspno) .set(B200_DEFAULT_FREQ); _tree->create<meta_range_t>(rf_fe_path / "freq" / "range") .publish(boost::bind(&ad9361_ctrl::get_rf_freq_range)); + _tree->create<sensor_value_t>(rf_fe_path / "sensors" / "temp") + .publish(boost::bind(&ad9361_ctrl::get_temperature, _codec_ctrl)); //setup RX related stuff + if(direction) + { + _tree->create<bool>(rf_fe_path / "dc_offset" / "enable" ) + .subscribe(boost::bind(&ad9361_ctrl::set_dc_offset_auto, _codec_ctrl, key, _1)).set(true); + + _tree->create<bool>(rf_fe_path / "iq_balance" / "enable" ) + .subscribe(boost::bind(&ad9361_ctrl::set_iq_balance_auto, _codec_ctrl, key, _1)).set(true); + } + + //add all frontend filters + std::vector<std::string> filter_names = _codec_ctrl->get_filter_names(key); + for(size_t i = 0;i < filter_names.size(); i++) + { + _tree->create<filter_info_base::sptr>(rf_fe_path / "filters" / filter_names[i] / "value" ) + .publish(boost::bind(&ad9361_ctrl::get_filter, _codec_ctrl, key, filter_names[i])) + .subscribe(boost::bind(&ad9361_ctrl::set_filter, _codec_ctrl, key, filter_names[i], _1)); + } + + //setup antenna stuff if (key[0] == 'R') { static const std::vector<std::string> ants = boost::assign::list_of("TX/RX")("RX2"); @@ -703,6 +784,16 @@ void b200_impl::setup_radio(const size_t dspno) .set("RX2"); _tree->create<sensor_value_t>(rf_fe_path / "sensors" / "rssi") .publish(boost::bind(&ad9361_ctrl::get_rssi, _codec_ctrl, key)); + + //AGC setup + const std::list<std::string> mode_strings = boost::assign::list_of("slow")("fast"); + _tree->create<bool>(rf_fe_path / "gain" / "agc" / "enable") + .subscribe(boost::bind((&ad9361_ctrl::set_agc), _codec_ctrl, key, _1)) + .set(false); + _tree->create<std::string>(rf_fe_path / "gain" / "agc" / "mode" / "value") + .subscribe(boost::bind((&ad9361_ctrl::set_agc_mode), _codec_ctrl, key, _1)).set(mode_strings.front()); + _tree->create<std::list<std::string> >(rf_fe_path / "gain" / "agc" / "mode" / "options") + .set(mode_strings); } if (key[0] == 'T') { @@ -760,7 +851,7 @@ void b200_impl::codec_loopback_self_test(wb_iface::sptr iface) /*********************************************************************** * Sample and tick rate comprehension below **********************************************************************/ -void b200_impl::enforce_tick_rate_limits(size_t chan_count, double tick_rate, const char* direction /*= NULL*/) +void b200_impl::enforce_tick_rate_limits(size_t chan_count, double tick_rate, const std::string &direction /*= ""*/) { const size_t max_chans = 2; if (chan_count > max_chans) @@ -768,7 +859,7 @@ void b200_impl::enforce_tick_rate_limits(size_t chan_count, double tick_rate, co throw uhd::value_error(boost::str( boost::format("cannot not setup %d %s channels (maximum is %d)") % chan_count - % (direction ? direction : "data") + % (direction.empty() ? "data" : direction) % max_chans )); } @@ -782,20 +873,26 @@ void b200_impl::enforce_tick_rate_limits(size_t chan_count, double tick_rate, co % (tick_rate/1e6) % (max_tick_rate/1e6) % chan_count - % (direction ? direction : "data") + % (direction.empty() ? "data" : direction) )); } } } -double b200_impl::set_tick_rate(const double rate) +double b200_impl::set_tick_rate(const double new_tick_rate) { - UHD_MSG(status) << (boost::format("Asking for clock rate %.6f MHz\n") % (rate/1e6)); - - check_tick_rate_with_current_streamers(rate); // Defined in b200_io_impl.cpp + UHD_MSG(status) << (boost::format("Asking for clock rate %.6f MHz... ") % (new_tick_rate/1e6)) << std::flush; + check_tick_rate_with_current_streamers(new_tick_rate); // Defined in b200_io_impl.cpp + + // Make sure the clock rate is actually changed before doing + // the full Monty of setting regs and loopback tests etc. + if (std::abs(new_tick_rate - _tick_rate) < 1.0) { + UHD_MSG(status) << "OK" << std::endl; + return _tick_rate; + } - _tick_rate = _codec_ctrl->set_clock_rate(rate); - UHD_MSG(status) << (boost::format("Actually got clock rate %.6f MHz\n") % (_tick_rate/1e6)); + _tick_rate = _codec_ctrl->set_clock_rate(new_tick_rate); + UHD_MSG(status) << std::endl << (boost::format("Actually got clock rate %.6f MHz.") % (_tick_rate/1e6)) << std::endl; //reset after clock rate change this->reset_codec_dcm(); @@ -856,6 +953,26 @@ void b200_impl::set_mb_eeprom(const uhd::usrp::mboard_eeprom_t &mb_eeprom) } +boost::uint32_t b200_impl::get_fp_gpio(gpio_core_200::sptr gpio) +{ + return boost::uint32_t(gpio->read_gpio(dboard_iface::UNIT_RX)); +} + +void b200_impl::set_fp_gpio(gpio_core_200::sptr gpio, const gpio_attr_t attr, const boost::uint32_t value) +{ + switch (attr) + { + case GPIO_CTRL: return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value); + case GPIO_DDR: return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value); + case GPIO_OUT: return gpio->set_gpio_out(dboard_iface::UNIT_RX, value); + case GPIO_ATR_0X: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value); + case GPIO_ATR_RX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value); + case GPIO_ATR_TX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value); + case GPIO_ATR_XX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value); + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + /*********************************************************************** * Reference time and clock **********************************************************************/ diff --git a/host/lib/usrp/b200/b200_impl.hpp b/host/lib/usrp/b200/b200_impl.hpp index 65796d1a4..3360d4453 100644 --- a/host/lib/usrp/b200/b200_impl.hpp +++ b/host/lib/usrp/b200/b200_impl.hpp @@ -1,5 +1,5 @@ // -// Copyright 2012-2013 Ettus Research LLC +// Copyright 2012-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -43,13 +43,14 @@ #include <uhd/usrp/gps_ctrl.hpp> #include <uhd/transport/usb_zero_copy.hpp> #include <uhd/transport/bounded_buffer.hpp> +#include <boost/assign.hpp> #include <boost/weak_ptr.hpp> #include "recv_packet_demuxer_3000.hpp" -static const boost::uint8_t B200_FW_COMPAT_NUM_MAJOR = 7; +static const boost::uint8_t B200_FW_COMPAT_NUM_MAJOR = 8; static const boost::uint8_t B200_FW_COMPAT_NUM_MINOR = 0; -static const boost::uint16_t B200_FPGA_COMPAT_NUM = 8; +static const boost::uint16_t B200_FPGA_COMPAT_NUM = 9; static const double B200_BUS_CLOCK_RATE = 100e6; -static const double B200_DEFAULT_TICK_RATE = 32e6; +static const double B200_DEFAULT_TICK_RATE = 16e6; static const double B200_DEFAULT_FREQ = 100e6; // Hz static const double B200_DEFAULT_DECIM = 128; static const double B200_DEFAULT_INTERP = 128; @@ -82,9 +83,18 @@ static const boost::uint32_t B200_RX_GPS_UART_SID = FLIP_SID(B200_TX_GPS_UART_SI static const boost::uint32_t B200_LOCAL_CTRL_SID = 0x00000040; static const boost::uint32_t B200_LOCAL_RESP_SID = FLIP_SID(B200_LOCAL_CTRL_SID); -/*********************************************************************** - * The B200 Capability Constants - **********************************************************************/ +/* + * VID/PID pairs for all B2xx products + */ +static std::vector<uhd::transport::usb_device_handle::vid_pid_pair_t> b200_vid_pid_pairs = + boost::assign::list_of + (uhd::transport::usb_device_handle::vid_pid_pair_t(B200_VENDOR_ID, B200_PRODUCT_ID)) + (uhd::transport::usb_device_handle::vid_pid_pair_t(B200_VENDOR_NI_ID, B200_PRODUCT_NI_ID)) + (uhd::transport::usb_device_handle::vid_pid_pair_t(B200_VENDOR_NI_ID, B210_PRODUCT_NI_ID)) + ; + +b200_type_t get_b200_type(const uhd::usrp::mboard_eeprom_t &mb_eeprom); +std::vector<uhd::transport::usb_device_handle::sptr> get_b200_device_handles(const uhd::device_addr_t &hint); //! Implementation guts class b200_impl : public uhd::device @@ -98,7 +108,13 @@ public: uhd::rx_streamer::sptr get_rx_stream(const uhd::stream_args_t &args); uhd::tx_streamer::sptr get_tx_stream(const uhd::stream_args_t &args); bool recv_async_msg(uhd::async_metadata_t &, double); - void check_streamer_args(const uhd::stream_args_t &args, double tick_rate, const char* direction = NULL); + + //! Check that the combination of stream args and tick rate are valid. + // + // Basically figures out the arguments for enforce_tick_rate_limits() + // and calls said method. If arguments are invalid, throws a + // uhd::value_error. + void check_streamer_args(const uhd::stream_args_t &args, double tick_rate, const std::string &direction = ""); private: b200_type_t _b200_type; @@ -154,6 +170,7 @@ private: { radio_ctrl_core_3000::sptr ctrl; gpio_core_200_32wo::sptr atr; + gpio_core_200::sptr fp_gpio; time_core_3000::sptr time64; rx_vita_core_3000::sptr framer; rx_dsp_core_3000::sptr ddc; @@ -200,14 +217,63 @@ private: void update_enables(void); void update_atrs(void); + boost::uint32_t get_fp_gpio(gpio_core_200::sptr); + void set_fp_gpio(gpio_core_200::sptr, const gpio_attr_t, const boost::uint32_t); + double _tick_rate; double get_tick_rate(void){return _tick_rate;} double set_tick_rate(const double rate); + + /*! \brief Choose a tick rate (master clock rate) that works well for the given sampling rate. + * + * This function will try and choose a master clock rate automatically. + * See the function definition for details on the algorithm. + * + * The chosen tick rate is the largest multiple of two that is smaler + * than the max tick rate. + * The base rate is either given explicitly, or is the lcm() of the tx + * and rx sampling rates. In that case, it reads the rates directly + * from the property tree. It also tries to guess the number of channels + * (for the max possible tick rate) by checking the available streamers. + * This value, too, can explicitly be given. + * + * \param rate If this is given, it will be used as a minimum rate, or + * argument to lcm(). + * \param tree_dsp_path The sampling rate from this property tree path + * will be ignored. + * \param num_chans If given, specifies the number of channels. + */ + void set_auto_tick_rate( + const double rate=0, + const uhd::fs_path &tree_dsp_path="", + size_t num_chans=0 + ); + void update_tick_rate(const double); - void enforce_tick_rate_limits(size_t chan_count, double tick_rate, const char* direction = NULL); + + /*! Check if \p tick_rate works with \p chan_count channels. + * + * Throws a uhd::value_error if not. + */ + void enforce_tick_rate_limits(size_t chan_count, double tick_rate, const std::string &direction = ""); void check_tick_rate_with_current_streamers(double rate); + /*! Return the max number of channels on active rx_streamer or tx_streamer objects associated with this device. + * + * \param direction Set to "TX" to only check tx_streamers, "RX" to only check + * rx_streamers. Any other value will check if \e any active + * streamers are available. + * \return Return the number of tx streamers (direction=="TX"), the number of rx + * streamers (direction=="RX") or the total number of streamers. + */ + size_t max_chan_count(const std::string &direction=""); + + //! Coercer, attached to the "rate/value" property on the rx dsps. + double coerce_rx_samp_rate(rx_dsp_core_3000::sptr, size_t, const double); void update_rx_samp_rate(const size_t, const double); + + //! Coercer, attached to the "rate/value" property on the tx dsps. + double coerce_tx_samp_rate(tx_dsp_core_3000::sptr, size_t, const double); void update_tx_samp_rate(const size_t, const double); }; diff --git a/host/lib/usrp/b200/b200_io_impl.cpp b/host/lib/usrp/b200/b200_io_impl.cpp index 1e11e7ff6..c4e04f70a 100644 --- a/host/lib/usrp/b200/b200_io_impl.cpp +++ b/host/lib/usrp/b200/b200_io_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2012-2013 Ettus Research LLC +// Copyright 2012-2014 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -21,8 +21,10 @@ #include "../../transport/super_recv_packet_handler.hpp" #include "../../transport/super_send_packet_handler.hpp" #include "async_packet_handler.hpp" +#include <uhd/utils/math.hpp> #include <boost/bind.hpp> #include <boost/make_shared.hpp> +#include <boost/math/common_factor.hpp> #include <set> using namespace uhd; @@ -34,30 +36,32 @@ using namespace uhd::transport; **********************************************************************/ void b200_impl::check_tick_rate_with_current_streamers(double rate) { - size_t max_tx_chan_count = 0, max_rx_chan_count = 0; + // Defined in b200_impl.cpp + enforce_tick_rate_limits(max_chan_count("RX"), rate, "RX"); + enforce_tick_rate_limits(max_chan_count("TX"), rate, "TX"); +} + +// direction can either be "TX", "RX", or empty (default) +size_t b200_impl::max_chan_count(const std::string &direction /* = "" */) +{ + size_t max_count = 0; BOOST_FOREACH(radio_perifs_t &perif, _radio_perifs) { - { + if ((direction == "RX" or direction.empty()) and not perif.rx_streamer.expired()) { boost::shared_ptr<sph::recv_packet_streamer> rx_streamer = boost::dynamic_pointer_cast<sph::recv_packet_streamer>(perif.rx_streamer.lock()); - if (rx_streamer) - max_rx_chan_count = std::max(max_rx_chan_count, rx_streamer->get_num_channels()); + max_count = std::max(max_count, rx_streamer->get_num_channels()); } - - { + if ((direction == "TX" or direction.empty()) and not perif.tx_streamer.expired()) { boost::shared_ptr<sph::send_packet_streamer> tx_streamer = boost::dynamic_pointer_cast<sph::send_packet_streamer>(perif.tx_streamer.lock()); - if (tx_streamer) - max_tx_chan_count = std::max(max_tx_chan_count, tx_streamer->get_num_channels()); + max_count = std::max(max_count, tx_streamer->get_num_channels()); } } - - // Defined in b200_impl.cpp - enforce_tick_rate_limits(max_rx_chan_count, rate, "RX"); - enforce_tick_rate_limits(max_tx_chan_count, rate, "TX"); + return max_count; } -void b200_impl::check_streamer_args(const uhd::stream_args_t &args, double tick_rate, const char* direction /*= NULL*/) +void b200_impl::check_streamer_args(const uhd::stream_args_t &args, double tick_rate, const std::string &direction /*= ""*/) { std::set<size_t> chans_set; for (size_t stream_i = 0; stream_i < args.channels.size(); stream_i++) @@ -69,26 +73,145 @@ void b200_impl::check_streamer_args(const uhd::stream_args_t &args, double tick_ enforce_tick_rate_limits(chans_set.size(), tick_rate, direction); // Defined in b200_impl.cpp } -void b200_impl::update_tick_rate(const double rate) +void b200_impl::set_auto_tick_rate( + const double rate, + const fs_path &tree_dsp_path, + size_t num_chans +) { + if (num_chans == 0) { // Divine them + num_chans = std::max(size_t(1), max_chan_count()); + } + const double max_tick_rate = ad9361_device_t::AD9361_MAX_CLOCK_RATE/num_chans; + if (rate != 0.0 and + (uhd::math::fp_compare::fp_compare_delta<double>(rate, uhd::math::FREQ_COMPARISON_DELTA_HZ) > + uhd::math::fp_compare::fp_compare_delta<double>(max_tick_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ))) { + throw uhd::value_error(str( + boost::format("Requested sampling rate (%.2f Msps) exceeds maximum tick rate of %.2f MHz.") + % (rate / 1e6) % (max_tick_rate / 1e6) + )); + } + + // See also the doxygen documentation for these steps in b200_impl.hpp + // Step 1: Obtain LCM and max rate from all relevant dsps + boost::uint32_t lcm_rate = (rate == 0) ? 1 : static_cast<boost::uint32_t>(floor(rate + 0.5)); + for (int i = 0; i < 2; i++) { // Loop through rx and tx + std::string dir = (i == 0) ? "tx" : "rx"; + // We have no way of knowing which DSPs are used, so we check them all. + BOOST_FOREACH(const std::string &dsp_no, _tree->list(str(boost::format("/mboards/0/%s_dsps") % dir))) { + fs_path dsp_path = str(boost::format("/mboards/0/%s_dsps/%s") % dir % dsp_no); + if (dsp_path == tree_dsp_path) { + continue; + } + double this_dsp_rate = _tree->access<double>(dsp_path / "rate/value").get(); + // Check if the user selected something completely unreasonable: + if (uhd::math::fp_compare::fp_compare_delta<double>(this_dsp_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ) > + uhd::math::fp_compare::fp_compare_delta<double>(max_tick_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ)) { + throw uhd::value_error(str( + boost::format("Requested sampling rate (%.2f Msps) exceeds maximum tick rate of %.2f MHz.") + % (this_dsp_rate / 1e6) % (max_tick_rate / 1e6) + )); + } + // If this_dsp_rate == 0.0, the sampling rate for this DSP hasn't been set, so + // we don't take that into consideration. + if (this_dsp_rate == 0.0) { + continue; + } + lcm_rate = boost::math::lcm<boost::uint32_t>( + lcm_rate, + static_cast<boost::uint32_t>(floor(this_dsp_rate + 0.5)) + ); + } + } + if (lcm_rate == 1) { + // In this case, no one has ever set a sampling rate. + return; + } + + // Step 2: Check if the lcm_rate is within available limits: + double base_rate = static_cast<double>(lcm_rate); + if (uhd::math::fp_compare::fp_compare_delta<double>(base_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ) > + uhd::math::fp_compare::fp_compare_delta<double>(max_tick_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ)) { + UHD_MSG(warning) + << "Cannot automatically determine an appropriate tick rate for these sampling rates." << std::endl + << "Consider using different sampling rates, or manually specify a suitable master clock rate." << std::endl; + return; // Let the others handle this + } + + // Step 3: Choose the new rate + // Rules for choosing the tick rate: + // Choose a rate that is a power of 2 larger than the sampling rate, + // but at least 4. Cannot exceed the max tick rate, of course, but must + // be larger than the minimum tick rate. + // An equation that does all that is: + // + // f_auto = r * 2^floor(log2(f_max/r)) + // = base_rate * multiplier + // + // where r is the base rate and f_max is the maximum tick rate. The case + // where floor() yields 1 must be caught. + const double min_tick_rate = _codec_ctrl->get_clock_rate_range().start(); + // We use shifts here instead of 2^x because exp2() is not available in all compilers, + // also this guarantees no rounding issues. The type cast to int32_t serves as floor(): + boost::int32_t multiplier = (1 << boost::int32_t(uhd::math::log2(max_tick_rate / base_rate))); + if (multiplier == 2 and base_rate >= min_tick_rate) { + // Don't bother (see above) + multiplier = 1; + } + double new_rate = base_rate * multiplier; + UHD_ASSERT_THROW( + uhd::math::fp_compare::fp_compare_delta<double>(new_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ) >= + uhd::math::fp_compare::fp_compare_delta<double>(min_tick_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ) + ); + UHD_ASSERT_THROW( + uhd::math::fp_compare::fp_compare_delta<double>(new_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ) <= + uhd::math::fp_compare::fp_compare_delta<double>(max_tick_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ) + ); + + if (!uhd::math::frequencies_are_equal(_tree->access<double>("/mboards/0/tick_rate").get(), new_rate)) { + _tree->access<double>("/mboards/0/tick_rate").set(new_rate); + } +} + +void b200_impl::update_tick_rate(const double new_tick_rate) { - check_tick_rate_with_current_streamers(rate); + check_tick_rate_with_current_streamers(new_tick_rate); BOOST_FOREACH(radio_perifs_t &perif, _radio_perifs) { boost::shared_ptr<sph::recv_packet_streamer> my_streamer = boost::dynamic_pointer_cast<sph::recv_packet_streamer>(perif.rx_streamer.lock()); - if (my_streamer) my_streamer->set_tick_rate(rate); - perif.framer->set_tick_rate(_tick_rate); + if (my_streamer) my_streamer->set_tick_rate(new_tick_rate); + perif.framer->set_tick_rate(new_tick_rate); } BOOST_FOREACH(radio_perifs_t &perif, _radio_perifs) { boost::shared_ptr<sph::send_packet_streamer> my_streamer = boost::dynamic_pointer_cast<sph::send_packet_streamer>(perif.tx_streamer.lock()); - if (my_streamer) my_streamer->set_tick_rate(rate); - perif.deframer->set_tick_rate(_tick_rate); + if (my_streamer) my_streamer->set_tick_rate(new_tick_rate); + perif.deframer->set_tick_rate(new_tick_rate); } } +#define CHECK_RATE_AND_THROW(rate) \ + if (uhd::math::fp_compare::fp_compare_delta<double>(rate, uhd::math::FREQ_COMPARISON_DELTA_HZ) > \ + uhd::math::fp_compare::fp_compare_delta<double>(ad9361_device_t::AD9361_MAX_CLOCK_RATE, uhd::math::FREQ_COMPARISON_DELTA_HZ)) { \ + throw uhd::value_error(str( \ + boost::format("Requested sampling rate (%.2f Msps) exceeds maximum tick rate.") \ + % (rate / 1e6) \ + )); \ + } + +double b200_impl::coerce_rx_samp_rate(rx_dsp_core_3000::sptr ddc, size_t dspno, const double rx_rate) +{ + // Have to set tick rate first, or the ddc will change the requested rate based on default tick rate + if (_tree->access<bool>("/mboards/0/auto_tick_rate").get()) { + CHECK_RATE_AND_THROW(rx_rate); + const std::string dsp_path = (boost::format("/mboards/0/rx_dsps/%s") % dspno).str(); + set_auto_tick_rate(rx_rate, dsp_path); + } + return ddc->set_host_rate(rx_rate); +} + #define CHECK_BANDWIDTH(dir) \ if (rate > _codec_ctrl->get_bw_filter_range(dir).stop()) { \ UHD_MSG(warning) \ @@ -108,6 +231,17 @@ void b200_impl::update_rx_samp_rate(const size_t dspno, const double rate) CHECK_BANDWIDTH("Rx"); } +double b200_impl::coerce_tx_samp_rate(tx_dsp_core_3000::sptr duc, size_t dspno, const double tx_rate) +{ + // Have to set tick rate first, or the duc will change the requested rate based on default tick rate + if (_tree->access<bool>("/mboards/0/auto_tick_rate").get()) { + CHECK_RATE_AND_THROW(tx_rate); + const std::string dsp_path = (boost::format("/mboards/0/tx_dsps/%s") % dspno).str(); + set_auto_tick_rate(tx_rate, dsp_path); + } + return duc->set_host_rate(tx_rate); +} + void b200_impl::update_tx_samp_rate(const size_t dspno, const double rate) { boost::shared_ptr<sph::send_packet_streamer> my_streamer = @@ -276,6 +410,9 @@ rx_streamer::sptr b200_impl::get_rx_stream(const uhd::stream_args_t &args_) if (args.otw_format.empty()) args.otw_format = "sc16"; args.channels = args.channels.empty()? std::vector<size_t>(1, 0) : args.channels; + if (_tree->access<bool>("/mboards/0/auto_tick_rate").get()) { + set_auto_tick_rate(0, "", args.channels.size()); + } check_streamer_args(args, this->get_tick_rate(), "RX"); boost::shared_ptr<sph::recv_packet_streamer> my_streamer; @@ -383,7 +520,10 @@ tx_streamer::sptr b200_impl::get_tx_stream(const uhd::stream_args_t &args_) if (args.otw_format.empty()) args.otw_format = "sc16"; args.channels = args.channels.empty()? std::vector<size_t>(1, 0) : args.channels; - check_streamer_args(args, this->get_tick_rate(), "TX"); + if (_tree->access<bool>("/mboards/0/auto_tick_rate").get()) { + set_auto_tick_rate(0, "", args.channels.size()); + } + check_streamer_args(args, this->get_tick_rate(), "RX"); boost::shared_ptr<sph::send_packet_streamer> my_streamer; for (size_t stream_i = 0; stream_i < args.channels.size(); stream_i++) diff --git a/host/lib/usrp/b200/b200_regs.hpp b/host/lib/usrp/b200/b200_regs.hpp index 900651f94..8f2dd03f3 100644 --- a/host/lib/usrp/b200/b200_regs.hpp +++ b/host/lib/usrp/b200/b200_regs.hpp @@ -46,11 +46,13 @@ localparam SR_TX_DSP = 184; localparam SR_TIME = 128; localparam SR_RX_FMT = 136; localparam SR_TX_FMT = 138; +localparam SR_FP_GPIO = 200; localparam RB32_TEST = 0; localparam RB64_TIME_NOW = 8; localparam RB64_TIME_PPS = 16; localparam RB64_CODEC_READBACK = 24; +localparam RB32_FP_GPIO = 32; //pll constants static const int AD9361_SLAVENO = (1 << 0); diff --git a/host/lib/usrp/common/ad9361_ctrl.cpp b/host/lib/usrp/common/ad9361_ctrl.cpp index 65e8e2df9..2d9f297b3 100644 --- a/host/lib/usrp/common/ad9361_ctrl.cpp +++ b/host/lib/usrp/common/ad9361_ctrl.cpp @@ -16,7 +16,6 @@ // #include "ad9361_ctrl.hpp" -#include <uhd/exception.hpp> #include <uhd/types/ranges.hpp> #include <uhd/utils/msg.hpp> #include <uhd/types/serial.hpp> @@ -108,6 +107,27 @@ public: return _device.set_gain(direction, chain, value); } + void set_agc(const std::string &which, bool enable) + { + boost::lock_guard<boost::mutex> lock(_mutex); + + ad9361_device_t::chain_t chain =_get_chain_from_antenna(which); + _device.set_agc(chain, enable); + } + + void set_agc_mode(const std::string &which, const std::string &mode) + { + boost::lock_guard<boost::mutex> lock(_mutex); + ad9361_device_t::chain_t chain =_get_chain_from_antenna(which); + if(mode == "slow") { + _device.set_agc_mode(chain, ad9361_device_t::GAIN_MODE_SLOW_AGC); + } else if (mode == "fast"){ + _device.set_agc_mode(chain, ad9361_device_t::GAIN_MODE_FAST_AGC); + } else { + throw uhd::runtime_error("ad9361_ctrl got an invalid AGC option."); + } + } + //! set a new clock rate, return the exact value double set_clock_rate(const double rate) { @@ -175,6 +195,62 @@ public: return sensor_value_t("RSSI", _device.get_rssi(chain), "dB"); } + //! read the internal temp sensor. Average over 3 results + sensor_value_t get_temperature() + { + return sensor_value_t("temp", _device.get_average_temperature(), "C"); + } + + void set_dc_offset_auto(const std::string &which, const bool on) + { + boost::lock_guard<boost::mutex> lock(_mutex); + + ad9361_device_t::direction_t direction = _get_direction_from_antenna(which); + _device.set_dc_offset_auto(direction,on); + } + + void set_iq_balance_auto(const std::string &which, const bool on) + { + boost::lock_guard<boost::mutex> lock(_mutex); + + ad9361_device_t::direction_t direction = _get_direction_from_antenna(which); + _device.set_iq_balance_auto(direction,on); + } + + double set_bw_filter(const std::string &which, const double bw) + { + boost::lock_guard<boost::mutex> lock(_mutex); + + ad9361_device_t::direction_t direction = _get_direction_from_antenna(which); + return _device.set_bw_filter(direction, bw); + } + + std::vector<std::string> get_filter_names(const std::string &which) + { + boost::lock_guard<boost::mutex> lock(_mutex); + + ad9361_device_t::direction_t direction = _get_direction_from_antenna(which); + return _device.get_filter_names(direction); + } + + filter_info_base::sptr get_filter(const std::string &which, const std::string &filter_name) + { + boost::lock_guard<boost::mutex> lock(_mutex); + + ad9361_device_t::direction_t direction = _get_direction_from_antenna(which); + ad9361_device_t::chain_t chain =_get_chain_from_antenna(which); + return _device.get_filter(direction, chain, filter_name); + } + + void set_filter(const std::string &which, const std::string &filter_name, const filter_info_base::sptr filter) + { + boost::lock_guard<boost::mutex> lock(_mutex); + + ad9361_device_t::direction_t direction = _get_direction_from_antenna(which); + ad9361_device_t::chain_t chain = _get_chain_from_antenna(which); + _device.set_filter(direction, chain, filter_name, filter); + } + private: static ad9361_device_t::direction_t _get_direction_from_antenna(const std::string& antenna) { diff --git a/host/lib/usrp/common/ad9361_ctrl.hpp b/host/lib/usrp/common/ad9361_ctrl.hpp index b7d7b8e26..ac0404b24 100644 --- a/host/lib/usrp/common/ad9361_ctrl.hpp +++ b/host/lib/usrp/common/ad9361_ctrl.hpp @@ -22,9 +22,13 @@ #include <uhd/types/ranges.hpp> #include <uhd/types/serial.hpp> #include <uhd/types/sensors.hpp> +#include <uhd/exception.hpp> #include <boost/shared_ptr.hpp> #include <ad9361_device.h> #include <string> +#include <complex> +#include <uhd/types/filters.hpp> +#include <vector> namespace uhd { namespace usrp { @@ -77,15 +81,18 @@ public: return uhd::meta_range_t(5e6, ad9361_device_t::AD9361_MAX_CLOCK_RATE); //5 MHz DCM low end } - //! set the filter bandwidth for the frontend - double set_bw_filter(const std::string &/*which*/, const double /*bw*/) - { - return 56e6; //TODO - } + //! set the filter bandwidth for the frontend's analog low pass + virtual double set_bw_filter(const std::string &/*which*/, const double /*bw*/) = 0; //! set the gain for a particular gain element virtual double set_gain(const std::string &which, const double value) = 0; + //! Enable or disable the AGC module + virtual void set_agc(const std::string &which, bool enable) = 0; + + //! configure the AGC module to slow or fast mode + virtual void set_agc_mode(const std::string &which, const std::string &mode) = 0; + //! set a new clock rate, return the exact value virtual double set_clock_rate(const double rate) = 0; @@ -95,14 +102,46 @@ public: //! tune the given frontend, return the exact value virtual double tune(const std::string &which, const double value) = 0; + //! set the DC offset for I and Q manually + void set_dc_offset(const std::string &, const std::complex<double>) + { + //This feature should not be used according to Analog Devices + throw uhd::runtime_error("ad9361_ctrl::set_dc_offset this feature is not supported on this device."); + } + + //! enable or disable the BB/RF DC tracking feature + virtual void set_dc_offset_auto(const std::string &which, const bool on) = 0; + + //! set the IQ correction value manually + void set_iq_balance(const std::string &, const std::complex<double>) + { + //This feature should not be used according to Analog Devices + throw uhd::runtime_error("ad9361_ctrl::set_iq_balance this feature is not supported on this device."); + } + + //! enable or disable the quadrature calibration + virtual void set_iq_balance_auto(const std::string &which, const bool on) = 0; + //! get the current frequency for the given frontend virtual double get_freq(const std::string &which) = 0; - //! turn on/off data port loopback + //! turn on/off Catalina's data port loopback virtual void data_port_loopback(const bool on) = 0; //! read internal RSSI sensor virtual sensor_value_t get_rssi(const std::string &which) = 0; + + //! read the internal temp sensor + virtual sensor_value_t get_temperature() = 0; + + //! List all available filters by name + virtual std::vector<std::string> get_filter_names(const std::string &which) = 0; + + //! Return a list of all filters + virtual filter_info_base::sptr get_filter(const std::string &which, const std::string &filter_name) = 0; + + //! Write back a filter + virtual void set_filter(const std::string &which, const std::string &filter_name, const filter_info_base::sptr) = 0; }; }} diff --git a/host/lib/usrp/common/ad9361_driver/ad9361_client.h b/host/lib/usrp/common/ad9361_driver/ad9361_client.h index 5e848d4c0..e9ea1404a 100644 --- a/host/lib/usrp/common/ad9361_driver/ad9361_client.h +++ b/host/lib/usrp/common/ad9361_driver/ad9361_client.h @@ -1,5 +1,18 @@ // -// Copyright 2014 Ettus Research LLC +// Copyright 2014 Ettus Research +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. // #ifndef INCLUDED_AD9361_CLIENT_H diff --git a/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp b/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp index db5de52d0..29241f6ba 100644 --- a/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp +++ b/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp @@ -1,5 +1,18 @@ // -// Copyright 2014 Ettus Research LLC +// Copyright 2014 Ettus Research +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. // #include "ad9361_filter_taps.h" @@ -11,6 +24,7 @@ #include <cmath> #include <uhd/exception.hpp> #include <uhd/utils/log.hpp> +#include <uhd/utils/msg.hpp> #include <boost/cstdint.hpp> #include <boost/date_time/posix_time/posix_time.hpp> #include <boost/thread/thread.hpp> @@ -78,6 +92,7 @@ int get_num_taps(int max_num_taps) { const double ad9361_device_t::AD9361_MAX_GAIN = 89.75; const double ad9361_device_t::AD9361_MAX_CLOCK_RATE = 61.44e6; +const double ad9361_device_t::AD9361_CAL_VALID_WINDOW = 100e6; // Max bandwdith is due to filter rolloff in analog filter stage const double ad9361_device_t::AD9361_RECOMMENDED_MAX_BANDWIDTH = 56e6; @@ -87,7 +102,7 @@ const double ad9361_device_t::AD9361_RECOMMENDED_MAX_BANDWIDTH = 56e6; * how many taps are in the filter, and given a vector of the taps * themselves. */ -void ad9361_device_t::_program_fir_filter(direction_t direction, int num_taps, boost::uint16_t *coeffs) +void ad9361_device_t::_program_fir_filter(direction_t direction, chain_t chain, int num_taps, boost::uint16_t *coeffs) { boost::uint16_t base; @@ -102,8 +117,20 @@ void ad9361_device_t::_program_fir_filter(direction_t direction, int num_taps, b /* Encode number of filter taps for programming register */ boost::uint8_t reg_numtaps = (((num_taps / 16) - 1) & 0x07) << 5; + boost::uint8_t reg_chain = 0; + switch (chain) { + case CHAIN_1: + reg_chain = 0x01 << 3; + break; + case CHAIN_2: + reg_chain = 0x02 << 3; + break; + default: + reg_chain = 0x03 << 3; + } + /* Turn on the filter clock. */ - _io_iface->poke8(base + 5, reg_numtaps | 0x1a); + _io_iface->poke8(base + 5, reg_numtaps | reg_chain | 0x02); boost::this_thread::sleep(boost::posix_time::milliseconds(1)); /* Zero the unused taps just in case they have stale data */ @@ -112,7 +139,7 @@ void ad9361_device_t::_program_fir_filter(direction_t direction, int num_taps, b _io_iface->poke8(base + 0, addr); _io_iface->poke8(base + 1, 0x0); _io_iface->poke8(base + 2, 0x0); - _io_iface->poke8(base + 5, reg_numtaps | 0x1e); + _io_iface->poke8(base + 5, reg_numtaps | reg_chain | (1 << 1) | (1 << 2)); _io_iface->poke8(base + 4, 0x00); _io_iface->poke8(base + 4, 0x00); } @@ -122,7 +149,7 @@ void ad9361_device_t::_program_fir_filter(direction_t direction, int num_taps, b _io_iface->poke8(base + 0, addr); _io_iface->poke8(base + 1, (coeffs[addr]) & 0xff); _io_iface->poke8(base + 2, (coeffs[addr] >> 8) & 0xff); - _io_iface->poke8(base + 5, reg_numtaps | 0x1e); + _io_iface->poke8(base + 5, reg_numtaps | reg_chain | (1 << 1) | (1 << 2)); _io_iface->poke8(base + 4, 0x00); _io_iface->poke8(base + 4, 0x00); } @@ -133,9 +160,9 @@ void ad9361_device_t::_program_fir_filter(direction_t direction, int num_taps, b before the clock stops. Wait 4 sample clock periods after setting D2 high while that data writes into the table" */ - _io_iface->poke8(base + 5, reg_numtaps | 0x1A); + _io_iface->poke8(base + 5, reg_numtaps | reg_chain | (1 << 1)); if (direction == RX) { - _io_iface->poke8(base + 5, reg_numtaps | 0x18); + _io_iface->poke8(base + 5, reg_numtaps | reg_chain ); /* Rx Gain, set to prevent digital overflow/saturation in filters 0:+6dB, 1:0dB, 2:-6dB, 3:-12dB page 35 of UG-671 */ @@ -144,7 +171,7 @@ void ad9361_device_t::_program_fir_filter(direction_t direction, int num_taps, b /* Tx Gain. bit[0]. set to prevent digital overflow/saturation in filters 0: 0dB, 1:-6dB page 25 of UG-671 */ - _io_iface->poke8(base + 5, reg_numtaps | 0x18); + _io_iface->poke8(base + 5, reg_numtaps | reg_chain ); } } @@ -175,7 +202,7 @@ void ad9361_device_t::_setup_rx_fir(size_t num_taps, boost::int32_t decimation) } } - _program_fir_filter(RX, num_taps, coeffs.get()); + _program_fir_filter(RX, CHAIN_BOTH, num_taps, coeffs.get()); } /* Program the TX FIR Filter. */ @@ -207,7 +234,7 @@ void ad9361_device_t::_setup_tx_fir(size_t num_taps, boost::int32_t interpolatio } } - _program_fir_filter(TX, num_taps, coeffs.get()); + _program_fir_filter(TX, CHAIN_BOTH, num_taps, coeffs.get()); } /*********************************************************************** @@ -282,16 +309,24 @@ void ad9361_device_t::_calibrate_synth_charge_pumps() * * Note that the filter calibration depends heavily on the baseband * bandwidth, so this must be re-done after any change to the RX sample - * rate. */ -double ad9361_device_t::_calibrate_baseband_rx_analog_filter() + * rate. + * UG570 Page 33 states that this filter should be calibrated to 1.4 * bbbw*/ +double ad9361_device_t::_calibrate_baseband_rx_analog_filter(double req_rfbw) { - /* For filter tuning, baseband BW is half the complex BW, and must be - * between 28e6 and 0.2e6. */ - double bbbw = _baseband_bw / 2.0; + double bbbw = req_rfbw / 2.0; + if(bbbw > _baseband_bw / 2.0) + { + UHD_LOG << "baseband bandwidth too large for current sample rate. Setting bandwidth to: "<<_baseband_bw; + bbbw = _baseband_bw / 2.0; + } + + /* Baseband BW must be between 28e6 and 0.143e6. + * Max filter BW is 39.2 MHz. 39.2 / 1.4 = 28 + * Min filter BW is 200kHz. 200 / 1.4 = 143 */ if (bbbw > 28e6) { bbbw = 28e6; - } else if (bbbw < 0.20e6) { - bbbw = 0.20e6; + } else if (bbbw < 0.143e6) { + bbbw = 0.143e6; } double rxtune_clk = ((1.4 * bbbw * 2 * M_PI) / M_LN2); @@ -340,16 +375,25 @@ double ad9361_device_t::_calibrate_baseband_rx_analog_filter() * * Note that the filter calibration depends heavily on the baseband * bandwidth, so this must be re-done after any change to the TX sample - * rate. */ -double ad9361_device_t::_calibrate_baseband_tx_analog_filter() + * rate. + * UG570 Page 32 states that this filter should be calibrated to 1.6 * bbbw*/ +double ad9361_device_t::_calibrate_baseband_tx_analog_filter(double req_rfbw) { - /* For filter tuning, baseband BW is half the complex BW, and must be - * between 28e6 and 0.2e6. */ - double bbbw = _baseband_bw / 2.0; + double bbbw = req_rfbw / 2.0; + + if(bbbw > _baseband_bw / 2.0) + { + UHD_LOG << "baseband bandwidth too large for current sample rate. Setting bandwidth to: "<<_baseband_bw; + bbbw = _baseband_bw / 2.0; + } + + /* Baseband BW must be between 20e6 and 0.391e6. + * Max filter BW is 32 MHz. 32 / 1.6 = 20 + * Min filter BW is 625 kHz. 625 / 1.6 = 391 */ if (bbbw > 20e6) { bbbw = 20e6; - } else if (bbbw < 0.625e6) { - bbbw = 0.625e6; + } else if (bbbw < 0.391e6) { + bbbw = 0.391e6; } double txtune_clk = ((1.6 * bbbw * 2 * M_PI) / M_LN2); @@ -386,16 +430,25 @@ double ad9361_device_t::_calibrate_baseband_tx_analog_filter() /* Calibrate the secondary TX filter. * * This filter also depends on the TX sample rate, so if a rate change is - * made, the previous calibration will no longer be valid. */ -void ad9361_device_t::_calibrate_secondary_tx_filter() + * made, the previous calibration will no longer be valid. + * UG570 Page 32 states that this filter should be calibrated to 5 * bbbw*/ +double ad9361_device_t::_calibrate_secondary_tx_filter(double req_rfbw) { - /* For filter tuning, baseband BW is half the complex BW, and must be - * between 20e6 and 0.53e6. */ - double bbbw = _baseband_bw / 2.0; + double bbbw = req_rfbw / 2.0; + + if(bbbw > _baseband_bw / 2.0) + { + UHD_LOG << "baseband bandwidth too large for current sample rate. Setting bandwidth to: "<<_baseband_bw; + bbbw = _baseband_bw / 2.0; + } + + /* Baseband BW must be between 20e6 and 0.54e6. + * Max filter BW is 100 MHz. 100 / 5 = 20 + * Min filter BW is 2.7 MHz. 2.7 / 5 = 0.54 */ if (bbbw > 20e6) { bbbw = 20e6; - } else if (bbbw < 0.53e6) { - bbbw = 0.53e6; + } else if (bbbw < 0.54e6) { + bbbw = 0.54e6; } double bbbw_mhz = bbbw / 1e6; @@ -456,13 +509,17 @@ void ad9361_device_t::_calibrate_secondary_tx_filter() _io_iface->poke8(0x0d2, reg0d2); _io_iface->poke8(0x0d1, reg0d1); _io_iface->poke8(0x0d0, reg0d0); + + return bbbw; } /* Calibrate the RX TIAs. * * Note that the values in the TIA register, after calibration, vary with - * the RX gain settings. */ -void ad9361_device_t::_calibrate_rx_TIAs() + * the RX gain settings. + * We do not really program the BW here. Most settings are taken form the BB LPF registers + * UG570 page 33 states that this filter should be calibrated to 2.5 * bbbw */ +double ad9361_device_t::_calibrate_rx_TIAs(double req_rfbw) { boost::uint8_t reg1eb = _io_iface->peek8(0x1eb) & 0x3F; boost::uint8_t reg1ec = _io_iface->peek8(0x1ec) & 0x7F; @@ -473,13 +530,21 @@ void ad9361_device_t::_calibrate_rx_TIAs() boost::uint8_t reg1de = 0x00; boost::uint8_t reg1df = 0x00; - /* For calibration, baseband BW is half the complex BW, and must be - * between 28e6 and 0.2e6. */ - double bbbw = _baseband_bw / 2.0; - if (bbbw > 20e6) { - bbbw = 20e6; - } else if (bbbw < 0.20e6) { - bbbw = 0.20e6; + double bbbw = req_rfbw / 2.0; + + if(bbbw > _baseband_bw / 2.0) + { + UHD_LOG << "baseband bandwidth too large for current sample rate. Setting bandwidth to: "<<_baseband_bw; + bbbw = _baseband_bw / 2.0; + } + + /* Baseband BW must be between 28e6 and 0.4e6. + * Max filter BW is 70 MHz. 70 / 2.5 = 28 + * Min filter BW is 1 MHz. 1 / 2.5 = 0.4*/ + if (bbbw > 28e6) { + bbbw = 28e6; + } else if (bbbw < 0.40e6) { + bbbw = 0.40e6; } double ceil_bbbw_mhz = std::ceil(bbbw / 1e6); @@ -520,6 +585,8 @@ void ad9361_device_t::_calibrate_rx_TIAs() _io_iface->poke8(0x1df, reg1df); _io_iface->poke8(0x1dc, reg1dc); _io_iface->poke8(0x1de, reg1de); + + return bbbw; } /* Setup the AD9361 ADC. @@ -651,11 +718,12 @@ void ad9361_device_t::_setup_adc() } /* Calibrate the baseband DC offset. - * - * Note that this function is called from within the TX quadrature - * calibration function! */ + * Disables tracking + */ void ad9361_device_t::_calibrate_baseband_dc_offset() { + _io_iface->poke8(0x18b, 0x83); //Reset RF DC tracking flag + _io_iface->poke8(0x193, 0x3f); // Calibration settings _io_iface->poke8(0x190, 0x0f); // Set tracking coefficient //write_ad9361_reg(device, 0x190, /*0x0f*//*0xDF*/0x80*1 | 0x40*1 | (16+8/*+4*/)); // Set tracking coefficient: don't *4 counter, do decim /4, increased gain shift @@ -675,9 +743,8 @@ void ad9361_device_t::_calibrate_baseband_dc_offset() } /* Calibrate the RF DC offset. - * - * Note that this function is called from within the TX quadrature - * calibration function. */ + * Disables tracking + */ void ad9361_device_t::_calibrate_rf_dc_offset() { /* Some settings are frequency-dependent. */ @@ -692,7 +759,7 @@ void ad9361_device_t::_calibrate_rf_dc_offset() } _io_iface->poke8(0x185, 0x20); // RF DC Offset wait count - _io_iface->poke8(0x18b, 0x83); + _io_iface->poke8(0x18b, 0x83); // Disable tracking _io_iface->poke8(0x189, 0x30); /* Run the calibration! */ @@ -708,6 +775,16 @@ void ad9361_device_t::_calibrate_rf_dc_offset() } } +void ad9361_device_t::_configure_bb_rf_dc_tracking(const bool on) +{ + if(on) + { + _io_iface->poke8(0x18b, 0xad); // Enable BB and RF DC tracking + } else { + _io_iface->poke8(0x18b, 0x83); // Disable BB and RF DC tracking + } +} + /* Start the RX quadrature calibration. * * Note that we are using AD9361's 'tracking' feature for RX quadrature @@ -719,17 +796,21 @@ void ad9361_device_t::_calibrate_rx_quadrature() _io_iface->poke8(0x168, 0x03); // Set tone level for cal _io_iface->poke8(0x16e, 0x25); // RX Gain index to use for cal _io_iface->poke8(0x16a, 0x75); // Set Kexp phase - _io_iface->poke8(0x16b, 0x15); // Set Kexp amplitude - _io_iface->poke8(0x169, 0xcf); // Continuous tracking mode - _io_iface->poke8(0x18b, 0xad); + _io_iface->poke8(0x16b, 0x95); // Set Kexp amplitude + + if(_use_iq_balance_correction) + { + _io_iface->poke8(0x169, 0xcf); // Continuous tracking mode. Gets disabled in _tx_quadrature_cal_routine! + } } -/* TX quadtrature calibration routine. +/* TX quadrature calibration routine. * * The TX quadrature needs to be done twice, once for each TX chain, with * only one register change in between. Thus, this function enacts the * calibrations, and it is called from calibrate_tx_quadrature. */ void ad9361_device_t::_tx_quadrature_cal_routine() { + /* This is a weird process, but here is how it works: * 1) Read the calibrated NCO frequency bits out of 0A3. * 2) Write the two bits to the RX NCO freq part of 0A0. @@ -765,7 +846,7 @@ void ad9361_device_t::_tx_quadrature_cal_routine() { /* The gain table index used for calibration must be adjusted for the * mid-table to get a TIA index = 1 and LPF index = 0. */ - if ((_rx_freq >= 1300e6) && (_rx_freq < 4000e6)) { + if (_rx_freq < 1300e6) { _io_iface->poke8(0x0aa, 0x22); // Cal gain table index } else { _io_iface->poke8(0x0aa, 0x25); // Cal gain table index @@ -774,12 +855,6 @@ void ad9361_device_t::_tx_quadrature_cal_routine() { _io_iface->poke8(0x0a4, 0xf0); // Cal setting conut _io_iface->poke8(0x0ae, 0x00); // Cal LPF gain index (split mode) - /* First, calibrate the baseband DC offset. */ - _calibrate_baseband_dc_offset(); - - /* Second, calibrate the RF DC offset. */ - _calibrate_rf_dc_offset(); - /* Now, calibrate the TX quadrature! */ size_t count = 0; _io_iface->poke8(0x016, 0x10); @@ -794,9 +869,7 @@ void ad9361_device_t::_tx_quadrature_cal_routine() { } /* Run the TX quadrature calibration. - * - * Note that from within this function we are also triggering the baseband - * and RF DC calibrations. */ + */ void ad9361_device_t::_calibrate_tx_quadrature() { /* Make sure we are, in fact, in the ALERT state. If not, something is @@ -880,7 +953,7 @@ void ad9361_device_t::_program_mixer_gm_subtable() void ad9361_device_t::_program_gain_table() { /* Figure out which gain table we should be using for our current * frequency band. */ - boost::uint8_t (*gain_table)[5] = NULL; + boost::uint8_t (*gain_table)[3] = NULL; boost::uint8_t new_gain_table; if (_rx_freq < 1300e6) { gain_table = gain_table_sub_1300mhz; @@ -911,9 +984,9 @@ void ad9361_device_t::_program_gain_table() { boost::uint8_t index = 0; for (; index < 77; index++) { _io_iface->poke8(0x130, index); - _io_iface->poke8(0x131, gain_table[index][1]); - _io_iface->poke8(0x132, gain_table[index][2]); - _io_iface->poke8(0x133, gain_table[index][3]); + _io_iface->poke8(0x131, gain_table[index][0]); + _io_iface->poke8(0x132, gain_table[index][1]); + _io_iface->poke8(0x133, gain_table[index][2]); _io_iface->poke8(0x137, 0x1E); _io_iface->poke8(0x134, 0x00); _io_iface->poke8(0x134, 0x00); @@ -939,28 +1012,58 @@ void ad9361_device_t::_program_gain_table() { /* Setup gain control registers. * - * This really only needs to be done once, at initialization. */ -void ad9361_device_t::_setup_gain_control() + * This really only needs to be done once, at initialization. + * If AGC is used the mode select bits (Reg 0x0FA) must be written manually */ +void ad9361_device_t::_setup_gain_control(bool agc) { - _io_iface->poke8(0x0FA, 0xE0); // Gain Control Mode Select - _io_iface->poke8(0x0FB, 0x08); // Table, Digital Gain, Man Gain Ctrl - _io_iface->poke8(0x0FC, 0x23); // Incr Step Size, ADC Overrange Size - _io_iface->poke8(0x0FD, 0x4C); // Max Full/LMT Gain Table Index - _io_iface->poke8(0x0FE, 0x44); // Decr Step Size, Peak Overload Time - _io_iface->poke8(0x100, 0x6F); // Max Digital Gain - _io_iface->poke8(0x104, 0x2F); // ADC Small Overload Threshold - _io_iface->poke8(0x105, 0x3A); // ADC Large Overload Threshold - _io_iface->poke8(0x107, 0x31); // Large LMT Overload Threshold - _io_iface->poke8(0x108, 0x39); // Small LMT Overload Threshold - _io_iface->poke8(0x109, 0x23); // Rx1 Full/LMT Gain Index - _io_iface->poke8(0x10A, 0x58); // Rx1 LPF Gain Index - _io_iface->poke8(0x10B, 0x00); // Rx1 Digital Gain Index - _io_iface->poke8(0x10C, 0x23); // Rx2 Full/LMT Gain Index - _io_iface->poke8(0x10D, 0x18); // Rx2 LPF Gain Index - _io_iface->poke8(0x10E, 0x00); // Rx2 Digital Gain Index - _io_iface->poke8(0x114, 0x30); // Low Power Threshold - _io_iface->poke8(0x11A, 0x27); // Initial LMT Gain Limit - _io_iface->poke8(0x081, 0x00); // Tx Symbol Gain Control + /* The AGC mode configuration should be good for all cases. + * However, non AGC configuration still used for backward compatibility. */ + if (agc) { + /*mode select bits must be written before hand!*/ + _io_iface->poke8(0x0FB, 0x08); // Table, Digital Gain, Man Gain Ctrl + _io_iface->poke8(0x0FC, 0x23); // Incr Step Size, ADC Overrange Size + _io_iface->poke8(0x0FD, 0x4C); // Max Full/LMT Gain Table Index + _io_iface->poke8(0x0FE, 0x44); // Decr Step Size, Peak Overload Time + _io_iface->poke8(0x100, 0x6F); // Max Digital Gain + _io_iface->poke8(0x101, 0x0A); // Max Digital Gain + _io_iface->poke8(0x103, 0x08); // Max Digital Gain + _io_iface->poke8(0x104, 0x2F); // ADC Small Overload Threshold + _io_iface->poke8(0x105, 0x3A); // ADC Large Overload Threshold + _io_iface->poke8(0x106, 0x22); // Max Digital Gain + _io_iface->poke8(0x107, 0x2B); // Large LMT Overload Threshold + _io_iface->poke8(0x108, 0x31); + _io_iface->poke8(0x111, 0x0A); + _io_iface->poke8(0x11A, 0x1C); + _io_iface->poke8(0x120, 0x0C); + _io_iface->poke8(0x121, 0x44); + _io_iface->poke8(0x122, 0x44); + _io_iface->poke8(0x123, 0x11); + _io_iface->poke8(0x124, 0xF5); + _io_iface->poke8(0x125, 0x3B); + _io_iface->poke8(0x128, 0x03); + _io_iface->poke8(0x129, 0x56); + _io_iface->poke8(0x12A, 0x22); + } else { + _io_iface->poke8(0x0FA, 0xE0); // Gain Control Mode Select + _io_iface->poke8(0x0FB, 0x08); // Table, Digital Gain, Man Gain Ctrl + _io_iface->poke8(0x0FC, 0x23); // Incr Step Size, ADC Overrange Size + _io_iface->poke8(0x0FD, 0x4C); // Max Full/LMT Gain Table Index + _io_iface->poke8(0x0FE, 0x44); // Decr Step Size, Peak Overload Time + _io_iface->poke8(0x100, 0x6F); // Max Digital Gain + _io_iface->poke8(0x104, 0x2F); // ADC Small Overload Threshold + _io_iface->poke8(0x105, 0x3A); // ADC Large Overload Threshold + _io_iface->poke8(0x107, 0x31); // Large LMT Overload Threshold + _io_iface->poke8(0x108, 0x39); // Small LMT Overload Threshold + _io_iface->poke8(0x109, 0x23); // Rx1 Full/LMT Gain Index + _io_iface->poke8(0x10A, 0x58); // Rx1 LPF Gain Index + _io_iface->poke8(0x10B, 0x00); // Rx1 Digital Gain Index + _io_iface->poke8(0x10C, 0x23); // Rx2 Full/LMT Gain Index + _io_iface->poke8(0x10D, 0x18); // Rx2 LPF Gain Index + _io_iface->poke8(0x10E, 0x00); // Rx2 Digital Gain Index + _io_iface->poke8(0x114, 0x30); // Low Power Threshold + _io_iface->poke8(0x11A, 0x27); // Initial LMT Gain Limit + _io_iface->poke8(0x081, 0x00); // Tx Symbol Gain Control + } } /* Setup the RX or TX synthesizers. @@ -1257,6 +1360,7 @@ double ad9361_device_t::_setup_rates(const double rate) int divfactor = 0; _tfir_factor = 0; _rfir_factor = 0; + if (rate < 0.33e6) { // RX1 + RX2 enabled, 3, 2, 2, 4 _regs.rxfilt = B8(11101111); @@ -1412,6 +1516,19 @@ void ad9361_device_t::initialize() _rx2_gain = 0; _tx1_gain = 0; _tx2_gain = 0; + _use_dc_offset_correction = true; + _use_iq_balance_correction = true; + _rx1_agc_mode = GAIN_MODE_SLOW_AGC; + _rx2_agc_mode = GAIN_MODE_SLOW_AGC; + _rx1_agc_enable = false; + _rx2_agc_enable = false; + _last_calibration_freq = -AD9361_CAL_VALID_WINDOW; + _rx_analog_bw = 0; + _tx_analog_bw = 0; + _rx_tia_lp_bw = 0; + _tx_sec_lp_bw = 0; + _rx_bb_lp_bw = 0; + _tx_bb_lp_bw = 0; /* Reset the device. */ _io_iface->poke8(0x000, 0x01); @@ -1490,7 +1607,6 @@ void ad9361_device_t::initialize() _io_iface->poke8(0x019, 0x00); // AuxDAC2 Word[9:2] _io_iface->poke8(0x01A, 0x00); // AuxDAC1 Config and Word[1:0] _io_iface->poke8(0x01B, 0x00); // AuxDAC2 Config and Word[1:0] - _io_iface->poke8(0x022, 0x4A); // Invert Bypassed LNA _io_iface->poke8(0x023, 0xFF); // AuxDAC Manaul/Auto Control _io_iface->poke8(0x026, 0x00); // AuxDAC Manual Select Bit/GPO Manual Select _io_iface->poke8(0x030, 0x00); // AuxDAC1 Rx Delay @@ -1498,10 +1614,18 @@ void ad9361_device_t::initialize() _io_iface->poke8(0x032, 0x00); // AuxDAC2 Rx Delay _io_iface->poke8(0x033, 0x00); // AuxDAC2 Tx Delay + /* LNA bypass polarity inversion + * According to the register map, we should invert the bypass path to + * match LNA phase. Extensive testing, however, shows otherwise and that + * to align bypass and LNA phases, the bypass inversion switch should be + * turned off. + */ + _io_iface->poke8(0x022, 0x0A); + /* Setup AuxADC */ _io_iface->poke8(0x00B, 0x00); // Temp Sensor Setup (Offset) _io_iface->poke8(0x00C, 0x00); // Temp Sensor Setup (Temp Window) - _io_iface->poke8(0x00D, 0x03); // Temp Sensor Setup (Periodic Measure) + _io_iface->poke8(0x00D, 0x00); // Temp Sensor Setup (Manual Measure) _io_iface->poke8(0x00F, 0x04); // Temp Sensor Setup (Decimation) _io_iface->poke8(0x01C, 0x10); // AuxADC Setup (Clock Div) _io_iface->poke8(0x01D, 0x01); // AuxADC Setup (Decimation/Enable) @@ -1555,17 +1679,18 @@ void ad9361_device_t::initialize() _program_mixer_gm_subtable(); _program_gain_table(); - _setup_gain_control(); + _setup_gain_control(false); - _calibrate_baseband_rx_analog_filter(); - _calibrate_baseband_tx_analog_filter(); - _calibrate_rx_TIAs(); - _calibrate_secondary_tx_filter(); + set_bw_filter(RX, _baseband_bw); + set_bw_filter(TX, _baseband_bw); _setup_adc(); + _calibrate_baseband_dc_offset(); + _calibrate_rf_dc_offset(); _calibrate_tx_quadrature(); _calibrate_rx_quadrature(); + _configure_bb_rf_dc_tracking(_use_dc_offset_correction); // cals done, set PPORT config switch (_client_params->get_digital_interface_mode()) { @@ -1680,18 +1805,19 @@ double ad9361_device_t::set_clock_rate(const double req_rate) _program_mixer_gm_subtable(); _program_gain_table(); - _setup_gain_control(); + _setup_gain_control(false); _reprogram_gains(); - _calibrate_baseband_rx_analog_filter(); - _calibrate_baseband_tx_analog_filter(); - _calibrate_rx_TIAs(); - _calibrate_secondary_tx_filter(); + set_bw_filter(RX, _baseband_bw); + set_bw_filter(TX, _baseband_bw); _setup_adc(); + _calibrate_baseband_dc_offset(); + _calibrate_rf_dc_offset(); _calibrate_tx_quadrature(); _calibrate_rx_quadrature(); + _configure_bb_rf_dc_tracking(_use_dc_offset_correction); // cals done, set PPORT config switch (_client_params->get_digital_interface_mode()) { @@ -1843,9 +1969,16 @@ double ad9361_device_t::tune(direction_t direction, const double value) /* Update the gain settings. */ _reprogram_gains(); - /* Run the calibration algorithms. */ - _calibrate_tx_quadrature(); - _calibrate_rx_quadrature(); + /* Only run the following calibrations if we are more than 100MHz away + * from the previous calibration point. */ + if (std::abs(_last_calibration_freq - tune_freq) > AD9361_CAL_VALID_WINDOW) { + /* Run the calibration algorithms. */ + _calibrate_rf_dc_offset(); + _calibrate_tx_quadrature(); + _calibrate_rx_quadrature(); + _configure_bb_rf_dc_tracking(_use_dc_offset_correction); + _last_calibration_freq = tune_freq; + } /* If we were in the FDD state, return it now. */ if (not_in_alert) { @@ -1960,4 +2093,678 @@ double ad9361_device_t::get_rssi(chain_t chain) return rssi; } +/* + * Returns the reading of the internal temperature sensor. + * One point calibration of the sensor was done according to datasheet + * leading to the given default constant correction factor. + */ +double ad9361_device_t::_get_temperature(const double cal_offset, const double timeout) +{ + //set 0x01D[0] to 1 to disable AuxADC GPIO reading + boost::uint8_t tmp = 0; + tmp = _io_iface->peek8(0x01D); + _io_iface->poke8(0x01D, (tmp | 0x01)); + _io_iface->poke8(0x00B, 0); //set offset to 0 + + _io_iface->poke8(0x00C, 0x01); //start reading, clears bit 0x00C[1] + boost::posix_time::ptime start_time = boost::posix_time::microsec_clock::local_time(); + boost::posix_time::time_duration elapsed; + //wait for valid data (toggle of bit 1 in 0x00C) + while(((_io_iface->peek8(0x00C) >> 1) & 0x01) == 0) { + boost::this_thread::sleep(boost::posix_time::microseconds(100)); + elapsed = boost::posix_time::microsec_clock::local_time() - start_time; + if(elapsed.total_milliseconds() > (timeout*1000)) + { + throw uhd::runtime_error("[ad9361_device_t] timeout while reading temperature"); + } + } + _io_iface->poke8(0x00C, 0x00); //clear read flag + + boost::uint8_t temp = _io_iface->peek8(0x00E); //read temperature. + double tmp_temp = temp/1.140f; //according to ADI driver + tmp_temp = tmp_temp + cal_offset; //Constant offset acquired by one point calibration. + + return tmp_temp; +} + +double ad9361_device_t::get_average_temperature(const double cal_offset, const size_t num_samples) +{ + double d_temp = 0; + for(size_t i = 0; i < num_samples; i++) { + double tmp_temp = _get_temperature(cal_offset); + d_temp += (tmp_temp/num_samples); + } + return d_temp; +} + +void ad9361_device_t::set_dc_offset_auto(direction_t direction, const bool on) +{ + if(direction == RX) + { + _use_dc_offset_correction = on; + _configure_bb_rf_dc_tracking(_use_dc_offset_correction); + if(on) + { + _io_iface->poke8(0x182, (_io_iface->peek8(0x182) & (~((1 << 7) | (1 << 6) | (1 << 3) | (1 << 2))))); //Clear force bits + //Do a single shot DC offset cal before enabling tracking (Not possible if not in ALERT state. Is it necessary?) + } else { + //clear current config values + _io_iface->poke8(0x182, (_io_iface->peek8(0x182) | ((1 << 7) | (1 << 6) | (1 << 3) | (1 << 2)))); //Set input A and input B&C force enable bits + _io_iface->poke8(0x174, 0x00); + _io_iface->poke8(0x175, 0x00); + _io_iface->poke8(0x176, 0x00); + _io_iface->poke8(0x177, 0x00); + _io_iface->poke8(0x178, 0x00); + _io_iface->poke8(0x17D, 0x00); + _io_iface->poke8(0x17E, 0x00); + _io_iface->poke8(0x17F, 0x00); + _io_iface->poke8(0x180, 0x00); + _io_iface->poke8(0x181, 0x00); + } + } else { + // DC offset is removed during TX quad cal + throw uhd::runtime_error("[ad9361_device_t] [set_iq_balance_auto] INVALID_CODE_PATH"); + } +} + +void ad9361_device_t::set_iq_balance_auto(direction_t direction, const bool on) +{ + if(direction == RX) + { + _use_iq_balance_correction = on; + if(on) + { + //disable force registers and enable tracking + _io_iface->poke8(0x182, (_io_iface->peek8(0x182) & (~ ( (1<<1) | (1<<0) | (1<<5) | (1<<4) )))); + _calibrate_rx_quadrature(); + } else { + //disable IQ tracking + _io_iface->poke8(0x169, 0xc0); + //clear current config values + _io_iface->poke8(0x182, (_io_iface->peek8(0x182) | ((1 << 1) | (1 << 0) | (1 << 5) | (1 << 4)))); //Set Rx2 input B&C force enable bit + _io_iface->poke8(0x17B, 0x00); + _io_iface->poke8(0x17C, 0x00); + _io_iface->poke8(0x179, 0x00); + _io_iface->poke8(0x17A, 0x00); + _io_iface->poke8(0x170, 0x00); + _io_iface->poke8(0x171, 0x00); + _io_iface->poke8(0x172, 0x00); + _io_iface->poke8(0x173, 0x00); + } + } else { + throw uhd::runtime_error("[ad9361_device_t] [set_iq_balance_auto] INVALID_CODE_PATH"); + } +} + +/* Sets the RX gain mode to be used. + * If a transition from an AGC to an non AGC mode occurs (or vice versa) + * the gain configuration will be reloaded. */ +void ad9361_device_t::_setup_agc(chain_t chain, gain_mode_t gain_mode) +{ + boost::uint8_t gain_mode_reg = 0; + boost::uint8_t gain_mode_prev = 0; + boost::uint8_t gain_mode_bits_pos = 0; + + gain_mode_reg = _io_iface->peek8(0x0FA); + gain_mode_prev = (gain_mode_reg & 0x0F); + + if (chain == CHAIN_1) { + gain_mode_bits_pos = 0; + } else if (chain == CHAIN_2) { + gain_mode_bits_pos = 2; + } else + { + throw uhd::runtime_error("[ad9361_device_t] Wrong value for chain"); + } + + gain_mode_reg = (gain_mode_reg & (~(0x03<<gain_mode_bits_pos))); //clear mode bits + switch (gain_mode) { + case GAIN_MODE_MANUAL: + //leave bits cleared + break; + case GAIN_MODE_SLOW_AGC: + gain_mode_reg = (gain_mode_reg | (0x02<<gain_mode_bits_pos)); + break; + case GAIN_MODE_FAST_AGC: + gain_mode_reg = (gain_mode_reg | (0x01<<gain_mode_bits_pos)); + break; + default: + throw uhd::runtime_error("[ad9361_device_t] Gain mode does not exist"); + } + _io_iface->poke8(0x0FA, gain_mode_reg); + boost::uint8_t gain_mode_status = _io_iface->peek8(0x0FA); + gain_mode_status = (gain_mode_status & 0x0F); + /*Check if gain mode configuration needs to be reprogrammed*/ + if (((gain_mode_prev == 0) && (gain_mode_status != 0)) || ((gain_mode_prev != 0) && (gain_mode_status == 0))) { + if (gain_mode_status == 0) { + /*load manual mode config*/ + _setup_gain_control(false); + } else { + /*load agc mode config*/ + _setup_gain_control(true); + } + } +} + +void ad9361_device_t::set_agc(chain_t chain, bool enable) +{ + if(chain == CHAIN_1) { + _rx1_agc_enable = enable; + if(enable) { + _setup_agc(chain, _rx1_agc_mode); + } else { + _setup_agc(chain, GAIN_MODE_MANUAL); + } + } else if (chain == CHAIN_2){ + _rx2_agc_enable = enable; + if(enable) { + _setup_agc(chain, _rx2_agc_mode); + } else { + _setup_agc(chain, GAIN_MODE_MANUAL); + } + } else + { + throw uhd::runtime_error("[ad9361_device_t] Wrong value for chain"); + } +} + +void ad9361_device_t::set_agc_mode(chain_t chain, gain_mode_t gain_mode) +{ + if(chain == CHAIN_1) { + _rx1_agc_mode = gain_mode; + if(_rx1_agc_enable) { + _setup_agc(chain, _rx1_agc_mode); + } + } else if(chain == CHAIN_2){ + _rx2_agc_mode = gain_mode; + if(_rx2_agc_enable) { + _setup_agc(chain, _rx2_agc_mode); + } + } else + { + throw uhd::runtime_error("[ad9361_device_t] Wrong value for chain"); + } +} + +std::vector<std::string> ad9361_device_t::get_filter_names(direction_t direction) +{ + std::vector<std::string> ret; + if(direction == RX) { + for(std::map<std::string, filter_query_helper>::iterator it = _rx_filters.begin(); it != _rx_filters.end(); ++it) { + ret.push_back(it->first); + } + } else if (direction == TX) + { + for(std::map<std::string, filter_query_helper>::iterator it = _tx_filters.begin(); it != _tx_filters.end(); ++it) { + ret.push_back(it->first); + } + } + return ret; +} + +filter_info_base::sptr ad9361_device_t::get_filter(direction_t direction, chain_t chain, const std::string &name) +{ + if(direction == RX) { + if (not _rx_filters[name].get) + { + throw uhd::runtime_error("ad9361_device_t::get_filter this filter can not be read."); + } + return _rx_filters[name].get(direction, chain); + } else if (direction == TX) { + if (not _tx_filters[name].get) + { + throw uhd::runtime_error("ad9361_device_t::get_filter this filter can not be read."); + } + return _tx_filters[name].get(direction, chain); + } + + throw uhd::runtime_error("ad9361_device_t::get_filter wrong direction parameter."); +} + +void ad9361_device_t::set_filter(direction_t direction, chain_t chain, const std::string &name, filter_info_base::sptr filter) +{ + + if(direction == RX) { + if(not _rx_filters[name].set) + { + throw uhd::runtime_error("ad9361_device_t::set_filter this filter can not be written."); + } + _rx_filters[name].set(direction, chain, filter); + } else if (direction == TX) { + if(not _tx_filters[name].set) + { + throw uhd::runtime_error("ad9361_device_t::set_filter this filter can not be written."); + } + _tx_filters[name].set(direction, chain, filter); + } + +} + +double ad9361_device_t::set_bw_filter(direction_t direction, const double rf_bw) +{ + //both low pass filters are programmed to the same bw. However, their cutoffs will differ. + //Together they should create the requested bb bw. + double set_analog_bb_bw = 0; + if(direction == RX) + { + _rx_bb_lp_bw = _calibrate_baseband_rx_analog_filter(rf_bw); //returns bb bw + _rx_tia_lp_bw = _calibrate_rx_TIAs(rf_bw); + _rx_analog_bw = _rx_bb_lp_bw; + set_analog_bb_bw = _rx_analog_bw; + } else { + _tx_bb_lp_bw = _calibrate_baseband_tx_analog_filter(rf_bw); //returns bb bw + _tx_sec_lp_bw = _calibrate_secondary_tx_filter(rf_bw); + _tx_analog_bw = _tx_bb_lp_bw; + set_analog_bb_bw = _tx_analog_bw; + } + return (2.0 * set_analog_bb_bw); +} + +void ad9361_device_t::_set_fir_taps(direction_t direction, chain_t chain, const std::vector<boost::int16_t>& taps) +{ + size_t num_taps = taps.size(); + size_t num_taps_avail = _get_num_fir_taps(direction); + if(num_taps == num_taps_avail) + { + boost::scoped_array<boost::uint16_t> coeffs(new boost::uint16_t[num_taps_avail]); + for (size_t i = 0; i < num_taps_avail; i++) + { + coeffs[i] = boost::uint16_t(taps[i]); + } + _program_fir_filter(direction, chain, num_taps_avail, coeffs.get()); + } else if(num_taps < num_taps_avail){ + throw uhd::runtime_error("ad9361_device_t::_set_fir_taps not enough coefficients."); + } else { + throw uhd::runtime_error("ad9361_device_t::_set_fir_taps too many coefficients."); + } +} + +size_t ad9361_device_t::_get_num_fir_taps(direction_t direction) +{ + boost::uint8_t num = 0; + if(direction == RX) + num = _io_iface->peek8(0x0F5); + else + num = _io_iface->peek8(0x065); + num = ((num >> 5) & 0x07); + return ((num + 1) * 16); +} + +size_t ad9361_device_t::_get_fir_dec_int(direction_t direction) +{ + boost::uint8_t dec_int = 0; + if(direction == RX) + dec_int = _io_iface->peek8(0x003); + else + dec_int = _io_iface->peek8(0x002); + /* + * 0 = dec/int by 1 and bypass filter + * 1 = dec/int by 1 + * 2 = dec/int by 2 + * 3 = dec/int by 4 */ + dec_int = (dec_int & 0x03); + if(dec_int == 3) + { + return 4; + } + return dec_int; +} + +std::vector<boost::int16_t> ad9361_device_t::_get_fir_taps(direction_t direction, chain_t chain) +{ + int base; + size_t num_taps = _get_num_fir_taps(direction); + boost::uint8_t config; + boost::uint8_t reg_numtaps = (((num_taps / 16) - 1) & 0x07) << 5; + config = reg_numtaps | 0x02; //start the programming clock + + if(chain == CHAIN_1) + { + config = config | (1 << 3); + } else if (chain == CHAIN_2){ + config = config | (1 << 4); + } else { + throw uhd::runtime_error("[ad9361_device_t] Can not read both chains synchronously"); + } + + if(direction == RX) + { + base = 0xF0; + } else { + base = 0x60; + } + + _io_iface->poke8(base+5,config); + + std::vector<boost::int16_t> taps; + boost::uint8_t lower_val; + boost::uint8_t higher_val; + boost::uint16_t coeff; + for(size_t i = 0;i < num_taps;i++) + { + _io_iface->poke8(base,0x00+i); + lower_val = _io_iface->peek8(base+3); + higher_val = _io_iface->peek8(base+4); + coeff = ((higher_val << 8) | lower_val); + taps.push_back(boost::int16_t(coeff)); + } + + config = (config & (~(1 << 1))); //disable filter clock + _io_iface->poke8(base+5,config); + return taps; +} + +/* + * Returns either RX TIA LPF or TX Secondary LPF + * depending on the direction. + * See UG570 for details on used scaling factors. */ +filter_info_base::sptr ad9361_device_t::_get_filter_lp_tia_sec(direction_t direction) +{ + double cutoff = 0; + + if(direction == RX) + { + cutoff = 2.5 * _rx_tia_lp_bw; + } else { + cutoff = 5 * _tx_sec_lp_bw; + } + + filter_info_base::sptr lp(new analog_filter_lp(filter_info_base::ANALOG_LOW_PASS, false, 0, "single-pole", cutoff, 20)); + return lp; +} + +/* + * Returns RX/TX BB LPF. + * See UG570 for details on used scaling factors. */ +filter_info_base::sptr ad9361_device_t::_get_filter_lp_bb(direction_t direction) +{ + double cutoff = 0; + if(direction == RX) + { + cutoff = 1.4 * _rx_bb_lp_bw; + } else { + cutoff = 1.6 * _tx_bb_lp_bw; + } + + filter_info_base::sptr bb_lp(new analog_filter_lp(filter_info_base::ANALOG_LOW_PASS, false, 1, "third-order Butterworth", cutoff, 60)); + return bb_lp; +} + +/* + * For RX direction the DEC3 is returned. + * For TX direction the INT3 is returned. */ +filter_info_base::sptr ad9361_device_t::_get_filter_dec_int_3(direction_t direction) +{ + boost::uint8_t enable = 0; + double rate = _adcclock_freq; + double full_scale; + size_t dec = 0; + size_t interpol = 0; + filter_info_base::filter_type type = filter_info_base::DIGITAL_I16; + std::string name; + boost::int16_t taps_array_rx[] = {55, 83, 0, -393, -580, 0, 1914, 4041, 5120, 4041, 1914, 0, -580, -393, 0, 83, 55}; + boost::int16_t taps_array_tx[] = {36, -19, 0, -156, -12, 0, 479, 233, 0, -1215, -993, 0, 3569, 6277, 8192, 6277, 3569, 0, -993, -1215, 0, 223, 479, 0, -12, -156, 0, -19, 36}; + std::vector<boost::int16_t> taps; + + filter_info_base::sptr ret; + + if(direction == RX) + { + full_scale = 16384; + dec = 3; + interpol = 1; + + enable = _io_iface->peek8(0x003); + enable = ((enable >> 4) & 0x03); + taps.assign(taps_array_rx, taps_array_rx + sizeof(taps_array_rx) / sizeof(boost::int16_t) ); + + } else { + full_scale = 8192; + dec = 1; + interpol = 3; + + boost::uint8_t use_dac_clk_div = _io_iface->peek8(0x00A); + use_dac_clk_div = ((use_dac_clk_div >> 3) & 0x01); + if(use_dac_clk_div == 1) + { + rate = rate / 2; + } + + enable = _io_iface->peek8(0x002); + enable = ((enable >> 4) & 0x03); + if(enable == 2) //0 => int. by 1, 1 => int. by 2 (HB3), 2 => int. by 3 + { + rate /= 3; + } + + taps.assign(taps_array_tx, taps_array_tx + sizeof(taps_array_tx) / sizeof(boost::int16_t) ); + } + + ret = filter_info_base::sptr(new digital_filter_base<boost::int16_t>(type, (enable != 2) ? true : false, 2, rate, interpol, dec, full_scale, taps.size(), taps)); + return ret; +} + +filter_info_base::sptr ad9361_device_t::_get_filter_hb_3(direction_t direction) +{ + boost::uint8_t enable = 0; + double rate = _adcclock_freq; + double full_scale = 0; + size_t dec = 1; + size_t interpol = 1; + filter_info_base::filter_type type = filter_info_base::DIGITAL_I16; + boost::int16_t taps_array_rx[] = {1, 4, 6, 4, 1}; + boost::int16_t taps_array_tx[] = {1, 2, 1}; + std::vector<boost::int16_t> taps; + + if(direction == RX) + { + full_scale = 16; + dec = 2; + + enable = _io_iface->peek8(0x003); + enable = ((enable >> 4) & 0x03); + taps.assign(taps_array_rx, taps_array_rx + sizeof(taps_array_rx) / sizeof(boost::int16_t) ); + } else { + full_scale = 2; + interpol = 2; + + boost::uint8_t use_dac_clk_div = _io_iface->peek8(0x00A); + use_dac_clk_div = ((use_dac_clk_div >> 3) & 0x01); + if(use_dac_clk_div == 1) + { + rate = rate / 2; + } + + enable = _io_iface->peek8(0x002); + enable = ((enable >> 4) & 0x03); + if(enable == 1) + { + rate /= 2; + } + taps.assign(taps_array_tx, taps_array_tx + sizeof(taps_array_tx) / sizeof(boost::int16_t) ); + } + + filter_info_base::sptr hb = filter_info_base::sptr(new digital_filter_base<boost::int16_t>(type, (enable != 1) ? true : false, 2, rate, interpol, dec, full_scale, taps.size(), taps)); + return hb; +} + +filter_info_base::sptr ad9361_device_t::_get_filter_hb_2(direction_t direction) +{ + boost::uint8_t enable = 0; + double rate = _adcclock_freq; + double full_scale = 0; + size_t dec = 1; + size_t interpol = 1; + filter_info_base::filter_type type = filter_info_base::DIGITAL_I16; + boost::int16_t taps_array[] = {-9, 0, 73, 128, 73, 0, -9}; + std::vector<boost::int16_t> taps(taps_array, taps_array + sizeof(taps_array) / sizeof(boost::int16_t) ); + + digital_filter_base<boost::int16_t>::sptr hb_3 = boost::dynamic_pointer_cast<digital_filter_base<boost::int16_t> >(_get_filter_hb_3(direction)); + digital_filter_base<boost::int16_t>::sptr dec_int_3 = boost::dynamic_pointer_cast<digital_filter_base<boost::int16_t> >(_get_filter_dec_int_3(direction)); + + if(direction == RX) + { + full_scale = 256; + dec = 2; + enable = _io_iface->peek8(0x003); + } else { + full_scale = 128; + interpol = 2; + enable = _io_iface->peek8(0x002); + } + + enable = ((enable >> 3) & 0x01); + + if(!(hb_3->is_bypassed())) + { + if(direction == RX) + { + rate = hb_3->get_output_rate(); + }else if (direction == TX) { + rate = hb_3->get_input_rate(); + if(enable) + { + rate /= 2; + } + } + } else { //else dec3/int3 or none of them is used. + if(direction == RX) + { + rate = dec_int_3->get_output_rate(); + }else if (direction == TX) { + rate = dec_int_3->get_input_rate(); + if(enable) + { + rate /= 2; + } + } + } + + filter_info_base::sptr hb(new digital_filter_base<boost::int16_t>(type, (enable == 0) ? true : false, 3, rate, interpol, dec, full_scale, taps.size(), taps)); + return hb; +} + +filter_info_base::sptr ad9361_device_t::_get_filter_hb_1(direction_t direction) +{ + boost::uint8_t enable = 0; + double rate = 0; + double full_scale = 0; + size_t dec = 1; + size_t interpol = 1; + filter_info_base::filter_type type = filter_info_base::DIGITAL_I16; + + std::vector<boost::int16_t> taps; + boost::int16_t taps_rx_array[] = {-8, 0, 42, 0, -147, 0, 619, 1013, 619, 0, -147, 0, 42, 0, -8}; + boost::int16_t taps_tx_array[] = {-53, 0, 313, 0, -1155, 0, 4989, 8192, 4989, 0, -1155, 0, 313, 0, -53}; + + digital_filter_base<boost::int16_t>::sptr hb_2 = boost::dynamic_pointer_cast<digital_filter_base<boost::int16_t> >(_get_filter_hb_2(direction)); + + if(direction == RX) + { + full_scale = 2048; + dec = 2; + enable = _io_iface->peek8(0x003); + enable = ((enable >> 2) & 0x01); + rate = hb_2->get_output_rate(); + taps.assign(taps_rx_array, taps_rx_array + sizeof(taps_rx_array) / sizeof(boost::int16_t) ); + } else if (direction == TX) { + full_scale = 8192; + interpol = 2; + enable = _io_iface->peek8(0x002); + enable = ((enable >> 2) & 0x01); + rate = hb_2->get_input_rate(); + if(enable) + { + rate /= 2; + } + taps.assign(taps_tx_array, taps_tx_array + sizeof(taps_tx_array) / sizeof(boost::int16_t) ); + } + + filter_info_base::sptr hb(new digital_filter_base<boost::int16_t>(type, (enable == 0) ? true : false, 4, rate, interpol, dec, full_scale, taps.size(), taps)); + return hb; +} + +filter_info_base::sptr ad9361_device_t::_get_filter_fir(direction_t direction, chain_t chain) +{ + double rate = 0; + size_t dec = 1; + size_t interpol = 1; + size_t max_num_taps = 128; + boost::uint8_t enable = 1; + + digital_filter_base<boost::int16_t>::sptr hb_1 = boost::dynamic_pointer_cast<digital_filter_base<boost::int16_t> >(_get_filter_hb_1(direction)); + + if(direction == RX) + { + dec = _get_fir_dec_int(direction); + if(dec == 0) + { + enable = 0; + dec = 1; + } + interpol = 1; + rate = hb_1->get_output_rate(); + }else if (direction == TX) { + interpol = _get_fir_dec_int(direction); + if(interpol == 0) + { + enable = 0; + interpol = 1; + } + dec = 1; + rate = hb_1->get_input_rate(); + if(enable) + { + rate /= interpol; + } + } + max_num_taps = _get_num_fir_taps(direction); + + filter_info_base::sptr fir(new digital_filter_fir<boost::int16_t>(filter_info_base::DIGITAL_FIR_I16, (enable == 0) ? true : false, 5, rate, interpol, dec, 32767, max_num_taps, _get_fir_taps(direction, chain))); + + return fir; +} + +void ad9361_device_t::_set_filter_fir(direction_t direction, chain_t channel, filter_info_base::sptr filter) +{ + digital_filter_fir<boost::int16_t>::sptr fir = boost::dynamic_pointer_cast<digital_filter_fir<boost::int16_t> >(filter); + //only write taps. Ignore everything else for now + _set_fir_taps(direction, channel, fir->get_taps()); +} + +/* + * If BW of one of the analog filters gets overwritten manually, + * _tx_analog_bw and _rx_analog_bw are not valid any more! + * For useful data in those variables set_bw_filter method should be used + */ +void ad9361_device_t::_set_filter_lp_bb(direction_t direction, filter_info_base::sptr filter) +{ + analog_filter_lp::sptr lpf = boost::dynamic_pointer_cast<analog_filter_lp>(filter); + double bw = lpf->get_cutoff(); + if(direction == RX) + { + //remember: this function takes rf bw as its input and calibrated to 1.4 x the given value + _rx_bb_lp_bw = _calibrate_baseband_rx_analog_filter(2 * bw / 1.4); //returns bb bw + + } else { + //remember: this function takes rf bw as its input and calibrates to 1.6 x the given value + _tx_bb_lp_bw = _calibrate_baseband_tx_analog_filter(2 * bw / 1.6); + } +} + +void ad9361_device_t::_set_filter_lp_tia_sec(direction_t direction, filter_info_base::sptr filter) +{ + analog_filter_lp::sptr lpf = boost::dynamic_pointer_cast<analog_filter_lp>(filter); + double bw = lpf->get_cutoff(); + if(direction == RX) + { + //remember: this function takes rf bw as its input and calibrated to 2.5 x the given value + _rx_tia_lp_bw = _calibrate_rx_TIAs(2 * bw / 2.5); //returns bb bw + + } else { + //remember: this function takes rf bw as its input and calibrates to 5 x the given value + _tx_sec_lp_bw = _calibrate_secondary_tx_filter(2 * bw / 5); + } +} + }} diff --git a/host/lib/usrp/common/ad9361_driver/ad9361_device.h b/host/lib/usrp/common/ad9361_driver/ad9361_device.h index 71ce78da7..98369c2fc 100644 --- a/host/lib/usrp/common/ad9361_driver/ad9361_device.h +++ b/host/lib/usrp/common/ad9361_driver/ad9361_device.h @@ -1,5 +1,18 @@ // -// Copyright 2014 Ettus Research LLC +// Copyright 2014 Ettus Research +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. // #ifndef INCLUDED_AD9361_DEVICE_H @@ -8,6 +21,14 @@ #include <ad9361_client.h> #include <boost/noncopyable.hpp> #include <boost/thread/recursive_mutex.hpp> +#include <uhd/types/filters.hpp> +#include <uhd/types/sensors.hpp> +#include <complex> +#include <vector> +#include <map> +#include "boost/assign.hpp" +#include "boost/bind.hpp" +#include "boost/function.hpp" namespace uhd { namespace usrp { @@ -15,10 +36,41 @@ class ad9361_device_t : public boost::noncopyable { public: enum direction_t { RX, TX }; - enum chain_t { CHAIN_1, CHAIN_2 }; + enum gain_mode_t {GAIN_MODE_MANUAL, GAIN_MODE_SLOW_AGC, GAIN_MODE_FAST_AGC}; + enum chain_t { CHAIN_1, CHAIN_2, CHAIN_BOTH }; ad9361_device_t(ad9361_params::sptr client, ad9361_io::sptr io_iface) : - _client_params(client), _io_iface(io_iface) {} + _client_params(client), _io_iface(io_iface) { + + /* + * This Boost.Assign to_container() workaround is necessary because STL containers + * apparently confuse newer versions of MSVC. + * + * Source: http://www.boost.org/doc/libs/1_55_0/libs/assign/doc/#portability + */ + + _rx_filters = (boost::assign::map_list_of("LPF_TIA", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_lp_tia_sec, this, _1), + boost::bind(&ad9361_device_t::_set_filter_lp_tia_sec, this, _1, _3))) + ("LPF_BB", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_lp_bb, this, _1), + boost::bind(&ad9361_device_t::_set_filter_lp_bb, this, _1, _3))) + ("HB_3", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_hb_3, this, _1), 0)) + ("DEC_3", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_dec_int_3, this, _1), 0)) + ("HB_2", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_hb_2, this, _1), 0)) + ("HB_1", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_hb_1, this, _1), 0)) + ("FIR_1", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_fir, this, _1, _2), + boost::bind(&ad9361_device_t::_set_filter_fir, this, _1, _2, _3)))).to_container(_rx_filters); + + _tx_filters = (boost::assign::map_list_of("LPF_SECONDARY", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_lp_tia_sec, this, _1), + boost::bind(&ad9361_device_t::_set_filter_lp_tia_sec, this, _1, _3))) + ("LPF_BB", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_lp_bb, this, _1), + boost::bind(&ad9361_device_t::_set_filter_lp_bb, this, _1, _3))) + ("HB_3", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_hb_3, this, _1), 0)) + ("INT_3", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_dec_int_3, this, _1), 0)) + ("HB_2", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_hb_2, this, _1), 0)) + ("HB_1", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_hb_1, this, _1), 0)) + ("FIR_1", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_fir, this, _1, _2), + boost::bind(&ad9361_device_t::_set_filter_fir, this, _1, _2, _3)))).to_container(_tx_filters); + } /* Initialize the AD9361 codec. */ void initialize(); @@ -69,21 +121,56 @@ public: /* Read back the internal RSSI measurement data. */ double get_rssi(chain_t chain); + /*! Read the internal temperature sensor + *\param calibrate return raw sensor readings or apply calibration factor. + *\param num_samples number of measurements to average over + */ + double get_average_temperature(const double cal_offset = -30.0, const size_t num_samples = 3); + + /* Turn on/off AD9361's RX DC offset correction */ + void set_dc_offset_auto(direction_t direction, const bool on); + + /* Turn on/off AD9361's RX IQ imbalance correction */ + void set_iq_balance_auto(direction_t direction, const bool on); + + /* Configure AD9361's AGC module to use either fast or slow AGC mode. */ + void set_agc_mode(chain_t chain, gain_mode_t gain_mode); + + /* Enable AD9361's AGC gain mode. */ + void set_agc(chain_t chain, bool enable); + + /* Set bandwidth of AD9361's analog LP filters. + * Bandwidth should be RF bandwidth */ + double set_bw_filter(direction_t direction, const double rf_bw); + + /* + * Filter API implementation + * */ + filter_info_base::sptr get_filter(direction_t direction, chain_t chain, const std::string &name); + + void set_filter(direction_t direction, chain_t chain, const std::string &name, filter_info_base::sptr filter); + + std::vector<std::string> get_filter_names(direction_t direction); + //Constants static const double AD9361_MAX_GAIN; static const double AD9361_MAX_CLOCK_RATE; + static const double AD9361_CAL_VALID_WINDOW; static const double AD9361_RECOMMENDED_MAX_BANDWIDTH; private: //Methods void _program_fir_filter(direction_t direction, int num_taps, boost::uint16_t *coeffs); void _setup_tx_fir(size_t num_taps, boost::int32_t interpolation); void _setup_rx_fir(size_t num_taps, boost::int32_t decimation); + void _program_fir_filter(direction_t direction, chain_t chain, int num_taps, boost::uint16_t *coeffs); + void _setup_tx_fir(size_t num_taps); + void _setup_rx_fir(size_t num_taps); void _calibrate_lock_bbpll(); void _calibrate_synth_charge_pumps(); - double _calibrate_baseband_rx_analog_filter(); - double _calibrate_baseband_tx_analog_filter(); - void _calibrate_secondary_tx_filter(); - void _calibrate_rx_TIAs(); + double _calibrate_baseband_rx_analog_filter(double rfbw); + double _calibrate_baseband_tx_analog_filter(double rfbw); + double _calibrate_secondary_tx_filter(double rfbw); + double _calibrate_rx_TIAs(double rfbw); void _setup_adc(); void _calibrate_baseband_dc_offset(); void _calibrate_rf_dc_offset(); @@ -92,12 +179,29 @@ private: //Methods void _calibrate_tx_quadrature(); void _program_mixer_gm_subtable(); void _program_gain_table(); - void _setup_gain_control(); + void _setup_gain_control(bool use_agc); void _setup_synth(direction_t direction, double vcorate); double _tune_bbvco(const double rate); void _reprogram_gains(); double _tune_helper(direction_t direction, const double value); double _setup_rates(const double rate); + double _get_temperature(const double cal_offset, const double timeout = 0.1); + void _configure_bb_rf_dc_tracking(const bool on); + void _setup_agc(chain_t chain, gain_mode_t gain_mode); + void _set_fir_taps(direction_t direction, chain_t chain, const std::vector<boost::int16_t>& taps); + std::vector<boost::int16_t> _get_fir_taps(direction_t direction, chain_t chain); + size_t _get_num_fir_taps(direction_t direction); + size_t _get_fir_dec_int(direction_t direction); + filter_info_base::sptr _get_filter_lp_tia_sec(direction_t direction); + filter_info_base::sptr _get_filter_lp_bb(direction_t direction); + filter_info_base::sptr _get_filter_dec_int_3(direction_t direction); + filter_info_base::sptr _get_filter_hb_3(direction_t direction); + filter_info_base::sptr _get_filter_hb_2(direction_t direction); + filter_info_base::sptr _get_filter_hb_1(direction_t direction); + filter_info_base::sptr _get_filter_fir(direction_t direction, chain_t chain); + void _set_filter_fir(direction_t direction, chain_t channel, filter_info_base::sptr filter); + void _set_filter_lp_bb(direction_t direction, filter_info_base::sptr filter); + void _set_filter_lp_tia_sec(direction_t direction, filter_info_base::sptr filter); private: //Members typedef struct { @@ -110,11 +214,30 @@ private: //Members boost::uint8_t bbftune_mode; } chip_regs_t; + struct filter_query_helper + { + filter_query_helper( + boost::function<filter_info_base::sptr (direction_t, chain_t)> p_get, + boost::function<void (direction_t, chain_t, filter_info_base::sptr)> p_set + ) : get(p_get), set(p_set) { } + + filter_query_helper(){ } + + boost::function<filter_info_base::sptr (direction_t, chain_t)> get; + boost::function<void (direction_t, chain_t, filter_info_base::sptr)> set; + }; + + std::map<std::string, filter_query_helper> _rx_filters; + std::map<std::string, filter_query_helper> _tx_filters; + //Interfaces ad9361_params::sptr _client_params; ad9361_io::sptr _io_iface; //Intermediate state double _rx_freq, _tx_freq, _req_rx_freq, _req_tx_freq; + double _last_calibration_freq; + double _rx_analog_bw, _tx_analog_bw, _rx_bb_lp_bw, _tx_bb_lp_bw; + double _rx_tia_lp_bw, _tx_sec_lp_bw; //! Current baseband sampling rate (this is the actual rate the device is // is running at) double _baseband_bw; @@ -129,10 +252,14 @@ private: //Members double _rx1_gain, _rx2_gain, _tx1_gain, _tx2_gain; boost::int32_t _tfir_factor; boost::int32_t _rfir_factor; + gain_mode_t _rx1_agc_mode, _rx2_agc_mode; + bool _rx1_agc_enable, _rx2_agc_enable; //Register soft-copies chip_regs_t _regs; //Synchronization boost::recursive_mutex _mutex; + bool _use_dc_offset_correction; + bool _use_iq_balance_correction; }; }} //namespace diff --git a/host/lib/usrp/common/ad9361_driver/ad9361_filter_taps.h b/host/lib/usrp/common/ad9361_driver/ad9361_filter_taps.h index a1a85a49a..97ff858fd 100644 --- a/host/lib/usrp/common/ad9361_driver/ad9361_filter_taps.h +++ b/host/lib/usrp/common/ad9361_driver/ad9361_filter_taps.h @@ -1,5 +1,18 @@ // -// Copyright 2014 Ettus Research LLC +// Copyright 2014 Ettus Research +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. // #ifndef INCLUDED_AD9361_FILTER_TAPS_HPP diff --git a/host/lib/usrp/common/ad9361_driver/ad9361_gain_tables.h b/host/lib/usrp/common/ad9361_driver/ad9361_gain_tables.h index 786029d6e..8cd958e23 100644 --- a/host/lib/usrp/common/ad9361_driver/ad9361_gain_tables.h +++ b/host/lib/usrp/common/ad9361_driver/ad9361_gain_tables.h @@ -1,5 +1,18 @@ // -// Copyright 2014 Ettus Research LLC +// Copyright 2014 Ettus Research +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. // #ifndef INCLUDED_AD9361_GAIN_TABLES_HPP @@ -7,91 +20,91 @@ #include <boost/cstdint.hpp> -boost::uint8_t gain_table_sub_1300mhz[77][5] = { {0,0x00,0x00,0x20,1}, - {1,0x00,0x00,0x00,0}, {2,0x00,0x00,0x00,0}, {3,0x00,0x01,0x00,0}, - {4,0x00,0x02,0x00,0}, {5,0x00,0x03,0x00,0}, {6,0x00,0x04,0x00,0}, - {7,0x00,0x05,0x00,0}, {8,0x01,0x03,0x20,1}, {9,0x01,0x04,0x00,0}, - {10,0x01,0x05,0x00,0}, {11,0x01,0x06,0x00,0}, {12,0x01,0x07,0x00,0}, - {13,0x01,0x08,0x00,0}, {14,0x01,0x09,0x00,0}, {15,0x01,0x0A,0x00,0}, - {16,0x01,0x0B,0x00,0}, {17,0x01,0x0C,0x00,0}, {18,0x01,0x0D,0x00,0}, - {19,0x01,0x0E,0x00,0}, {20,0x02,0x09,0x20,1}, {21,0x02,0x0A,0x00,0}, - {22,0x02,0x0B,0x00,0}, {23,0x02,0x0C,0x00,0}, {24,0x02,0x0D,0x00,0}, - {25,0x02,0x0E,0x00,0}, {26,0x02,0x0F,0x00,0}, {27,0x02,0x10,0x00,0}, - {28,0x02,0x2B,0x20,1}, {29,0x02,0x2C,0x00,0}, {30,0x04,0x27,0x20,1}, - {31,0x04,0x28,0x00,0}, {32,0x04,0x29,0x00,0}, {33,0x04,0x2A,0x00,0}, - {34,0x04,0x2B,0x00,1}, {35,0x24,0x21,0x20,0}, {36,0x24,0x22,0x00,1}, - {37,0x44,0x20,0x20,0}, {38,0x44,0x21,0x00,0}, {39,0x44,0x22,0x00,0}, - {40,0x44,0x23,0x00,0}, {41,0x44,0x24,0x00,0}, {42,0x44,0x25,0x00,0}, - {43,0x44,0x26,0x00,0}, {44,0x44,0x27,0x00,0}, {45,0x44,0x28,0x00,0}, - {46,0x44,0x29,0x00,0}, {47,0x44,0x2A,0x00,0}, {48,0x44,0x2B,0x00,0}, - {49,0x44,0x2C,0x00,0}, {50,0x44,0x2D,0x00,0}, {51,0x44,0x2E,0x00,0}, - {52,0x44,0x2F,0x00,0}, {53,0x44,0x30,0x00,0}, {54,0x44,0x31,0x00,0}, - {55,0x64,0x2E,0x20,1}, {56,0x64,0x2F,0x00,0}, {57,0x64,0x30,0x00,0}, - {58,0x64,0x31,0x00,0}, {59,0x64,0x32,0x00,0}, {60,0x64,0x33,0x00,0}, - {61,0x64,0x34,0x00,0}, {62,0x64,0x35,0x00,0}, {63,0x64,0x36,0x00,0}, - {64,0x64,0x37,0x00,0}, {65,0x64,0x38,0x00,0}, {66,0x65,0x38,0x20,1}, - {67,0x66,0x38,0x20,1}, {68,0x67,0x38,0x20,1}, {69,0x68,0x38,0x20,1}, - {70,0x69,0x38,0x20,1}, {71,0x6A,0x38,0x20,1}, {72,0x6B,0x38,0x20,1}, - {73,0x6C,0x38,0x20,1}, {74,0x6D,0x38,0x20,1}, {75,0x6E,0x38,0x20,1}, - {76,0x6F,0x38,0x20,1}}; +boost::uint8_t gain_table_sub_1300mhz[77][3] = { +{ 0x00, 0x00, 0x20 }, { 0x00, 0x00, 0x00 }, { 0x00, 0x00, 0x00 }, +{ 0x00, 0x01, 0x00 }, { 0x00, 0x02, 0x00 }, { 0x00, 0x03, 0x00 }, +{ 0x00, 0x04, 0x00 }, { 0x00, 0x05, 0x00 }, { 0x01, 0x03, 0x20 }, +{ 0x01, 0x04, 0x00 }, { 0x01, 0x05, 0x00 }, { 0x01, 0x06, 0x00 }, +{ 0x01, 0x07, 0x00 }, { 0x01, 0x08, 0x00 }, { 0x01, 0x09, 0x00 }, +{ 0x01, 0x0A, 0x00 }, { 0x01, 0x0B, 0x00 }, { 0x01, 0x0C, 0x00 }, +{ 0x01, 0x0D, 0x00 }, { 0x01, 0x0E, 0x00 }, { 0x02, 0x09, 0x20 }, +{ 0x02, 0x0A, 0x00 }, { 0x02, 0x0B, 0x00 }, { 0x02, 0x0C, 0x00 }, +{ 0x02, 0x0D, 0x00 }, { 0x02, 0x0E, 0x00 }, { 0x02, 0x0F, 0x00 }, +{ 0x02, 0x10, 0x00 }, { 0x02, 0x2B, 0x20 }, { 0x02, 0x2C, 0x00 }, +{ 0x04, 0x28, 0x20 }, { 0x04, 0x29, 0x00 }, { 0x04, 0x2A, 0x00 }, +{ 0x04, 0x2B, 0x00 }, { 0x24, 0x20, 0x20 }, { 0x24, 0x21, 0x00 }, +{ 0x44, 0x20, 0x20 }, { 0x44, 0x21, 0x00 }, { 0x44, 0x22, 0x00 }, +{ 0x44, 0x23, 0x00 }, { 0x44, 0x24, 0x00 }, { 0x44, 0x25, 0x00 }, +{ 0x44, 0x26, 0x00 }, { 0x44, 0x27, 0x00 }, { 0x44, 0x28, 0x00 }, +{ 0x44, 0x29, 0x00 }, { 0x44, 0x2A, 0x00 }, { 0x44, 0x2B, 0x00 }, +{ 0x44, 0x2C, 0x00 }, { 0x44, 0x2D, 0x00 }, { 0x44, 0x2E, 0x00 }, +{ 0x44, 0x2F, 0x00 }, { 0x44, 0x30, 0x00 }, { 0x44, 0x31, 0x00 }, +{ 0x44, 0x32, 0x00 }, { 0x64, 0x2E, 0x20 }, { 0x64, 0x2F, 0x00 }, +{ 0x64, 0x30, 0x00 }, { 0x64, 0x31, 0x00 }, { 0x64, 0x32, 0x00 }, +{ 0x64, 0x33, 0x00 }, { 0x64, 0x34, 0x00 }, { 0x64, 0x35, 0x00 }, +{ 0x64, 0x36, 0x00 }, { 0x64, 0x37, 0x00 }, { 0x64, 0x38, 0x00 }, +{ 0x65, 0x38, 0x20 }, { 0x66, 0x38, 0x20 }, { 0x67, 0x38, 0x20 }, +{ 0x68, 0x38, 0x20 }, { 0x69, 0x38, 0x20 }, { 0x6A, 0x38, 0x20 }, +{ 0x6B, 0x38, 0x20 }, { 0x6C, 0x38, 0x20 }, { 0x6D, 0x38, 0x20 }, +{ 0x6E, 0x38, 0x20 }, { 0x6F, 0x38, 0x20 } }; -boost::uint8_t gain_table_1300mhz_to_4000mhz[77][5] = { {0,0x00,0x00,0x20,1}, - {1,0x00,0x00,0x00,0}, {2,0x00,0x00,0x00,0}, {3,0x00,0x01,0x00,0}, - {4,0x00,0x02,0x00,0}, {5,0x00,0x03,0x00,0}, {6,0x00,0x04,0x00,0}, - {7,0x00,0x05,0x00,0}, {8,0x01,0x03,0x20,1}, {9,0x01,0x04,0x00,0}, - {10,0x01,0x05,0x00,0}, {11,0x01,0x06,0x00,0}, {12,0x01,0x07,0x00,0}, - {13,0x01,0x08,0x00,0}, {14,0x01,0x09,0x00,0}, {15,0x01,0x0A,0x00,0}, - {16,0x01,0x0B,0x00,0}, {17,0x01,0x0C,0x00,0}, {18,0x01,0x0D,0x00,0}, - {19,0x01,0x0E,0x00,0}, {20,0x02,0x09,0x20,1}, {21,0x02,0x0A,0x00,0}, - {22,0x02,0x0B,0x00,0}, {23,0x02,0x0C,0x00,0}, {24,0x02,0x0D,0x00,0}, - {25,0x02,0x0E,0x00,0}, {26,0x02,0x0F,0x00,0}, {27,0x02,0x10,0x00,0}, - {28,0x02,0x2B,0x20,1}, {29,0x02,0x2C,0x00,0}, {30,0x04,0x28,0x20,1}, - {31,0x04,0x29,0x00,0}, {32,0x04,0x2A,0x00,0}, {33,0x04,0x2B,0x00,0}, - {34,0x24,0x20,0x20,0}, {35,0x24,0x21,0x00,1}, {36,0x44,0x20,0x20,0}, - {37,0x44,0x21,0x00,1}, {38,0x44,0x22,0x00,0}, {39,0x44,0x23,0x00,0}, - {40,0x44,0x24,0x00,0}, {41,0x44,0x25,0x00,0}, {42,0x44,0x26,0x00,0}, - {43,0x44,0x27,0x00,0}, {44,0x44,0x28,0x00,0}, {45,0x44,0x29,0x00,0}, - {46,0x44,0x2A,0x00,0}, {47,0x44,0x2B,0x00,0}, {48,0x44,0x2C,0x00,0}, - {49,0x44,0x2D,0x00,0}, {50,0x44,0x2E,0x00,0}, {51,0x44,0x2F,0x00,0}, - {52,0x44,0x30,0x00,0}, {53,0x44,0x31,0x00,0}, {54,0x44,0x32,0x00,0}, - {55,0x64,0x2E,0x20,1}, {56,0x64,0x2F,0x00,0}, {57,0x64,0x30,0x00,0}, - {58,0x64,0x31,0x00,0}, {59,0x64,0x32,0x00,0}, {60,0x64,0x33,0x00,0}, - {61,0x64,0x34,0x00,0}, {62,0x64,0x35,0x00,0}, {63,0x64,0x36,0x00,0}, - {64,0x64,0x37,0x00,0}, {65,0x64,0x38,0x00,0}, {66,0x65,0x38,0x20,1}, - {67,0x66,0x38,0x20,1}, {68,0x67,0x38,0x20,1}, {69,0x68,0x38,0x20,1}, - {70,0x69,0x38,0x20,1}, {71,0x6A,0x38,0x20,1}, {72,0x6B,0x38,0x20,1}, - {73,0x6C,0x38,0x20,1}, {74,0x6D,0x38,0x20,1}, {75,0x6E,0x38,0x20,1}, - {76,0x6F,0x38,0x20,1}}; +boost::uint8_t gain_table_1300mhz_to_4000mhz[77][3] = { +{ 0x00, 0x00, 0x20 }, { 0x00, 0x00, 0x00 }, { 0x00, 0x00, 0x00 }, +{ 0x00, 0x01, 0x00 }, { 0x00, 0x02, 0x00 }, { 0x00, 0x03, 0x00 }, +{ 0x00, 0x04, 0x00 }, { 0x00, 0x05, 0x00 }, { 0x01, 0x03, 0x20 }, +{ 0x01, 0x04, 0x00 }, { 0x01, 0x05, 0x00 }, { 0x01, 0x06, 0x00 }, +{ 0x01, 0x07, 0x00 }, { 0x01, 0x08, 0x00 }, { 0x01, 0x09, 0x00 }, +{ 0x01, 0x0A, 0x00 }, { 0x01, 0x0B, 0x00 }, { 0x01, 0x0C, 0x00 }, +{ 0x01, 0x0D, 0x00 }, { 0x01, 0x0E, 0x00 }, { 0x02, 0x09, 0x20 }, +{ 0x02, 0x0A, 0x00 }, { 0x02, 0x0B, 0x00 }, { 0x02, 0x0C, 0x00 }, +{ 0x02, 0x0D, 0x00 }, { 0x02, 0x0E, 0x00 }, { 0x02, 0x0F, 0x00 }, +{ 0x02, 0x10, 0x00 }, { 0x02, 0x2B, 0x20 }, { 0x02, 0x2C, 0x00 }, +{ 0x04, 0x27, 0x20 }, { 0x04, 0x28, 0x00 }, { 0x04, 0x29, 0x00 }, +{ 0x04, 0x2A, 0x00 }, { 0x04, 0x2B, 0x00 }, { 0x24, 0x21, 0x20 }, +{ 0x24, 0x22, 0x00 }, { 0x44, 0x20, 0x20 }, { 0x44, 0x21, 0x00 }, +{ 0x44, 0x22, 0x00 }, { 0x44, 0x23, 0x00 }, { 0x44, 0x24, 0x00 }, +{ 0x44, 0x25, 0x00 }, { 0x44, 0x26, 0x00 }, { 0x44, 0x27, 0x00 }, +{ 0x44, 0x28, 0x00 }, { 0x44, 0x29, 0x00 }, { 0x44, 0x2A, 0x00 }, +{ 0x44, 0x2B, 0x00 }, { 0x44, 0x2C, 0x00 }, { 0x44, 0x2D, 0x00 }, +{ 0x44, 0x2E, 0x00 }, { 0x44, 0x2F, 0x00 }, { 0x44, 0x30, 0x00 }, +{ 0x44, 0x31, 0x00 }, { 0x64, 0x2E, 0x20 }, { 0x64, 0x2F, 0x00 }, +{ 0x64, 0x30, 0x00 }, { 0x64, 0x31, 0x00 }, { 0x64, 0x32, 0x00 }, +{ 0x64, 0x33, 0x00 }, { 0x64, 0x34, 0x00 }, { 0x64, 0x35, 0x00 }, +{ 0x64, 0x36, 0x00 }, { 0x64, 0x37, 0x00 }, { 0x64, 0x38, 0x00 }, +{ 0x65, 0x38, 0x20 }, { 0x66, 0x38, 0x20 }, { 0x67, 0x38, 0x20 }, +{ 0x68, 0x38, 0x20 }, { 0x69, 0x38, 0x20 }, { 0x6A, 0x38, 0x20 }, +{ 0x6B, 0x38, 0x20 }, { 0x6C, 0x38, 0x20 }, { 0x6D, 0x38, 0x20 }, +{ 0x6E, 0x38, 0x20 }, { 0x6F, 0x38, 0x20 } }; -boost::uint8_t gain_table_4000mhz_to_6000mhz[77][5] = { {0,0x00,0x00,0x20,1}, - {1,0x00,0x00,0x00,0}, {2,0x00,0x00,0x00,0}, {3,0x00,0x00,0x00,0}, - {4,0x00,0x00,0x00,0}, {5,0x00,0x01,0x00,0}, {6,0x00,0x02,0x00,0}, - {7,0x00,0x03,0x00,0}, {8,0x01,0x01,0x20,1}, {9,0x01,0x02,0x00,0}, - {10,0x01,0x03,0x00,0}, {11,0x01,0x04,0x20,1}, {12,0x01,0x05,0x00,0}, - {13,0x01,0x06,0x00,0}, {14,0x01,0x07,0x00,0}, {15,0x01,0x08,0x00,0}, - {16,0x01,0x09,0x00,0}, {17,0x01,0x0A,0x00,0}, {18,0x01,0x0B,0x00,0}, - {19,0x01,0x0C,0x00,0}, {20,0x02,0x08,0x20,1}, {21,0x02,0x09,0x00,0}, - {22,0x02,0x0A,0x00,0}, {23,0x02,0x0B,0x20,1}, {24,0x02,0x0C,0x00,0}, - {25,0x02,0x0D,0x00,0}, {26,0x02,0x0E,0x00,0}, {27,0x02,0x0F,0x00,0}, - {28,0x02,0x2A,0x20,1}, {29,0x02,0x2B,0x00,0}, {30,0x04,0x27,0x20,1}, - {31,0x04,0x28,0x00,0}, {32,0x04,0x29,0x00,0}, {33,0x04,0x2A,0x00,0}, - {34,0x04,0x2B,0x00,0}, {35,0x04,0x2C,0x00,0}, {36,0x04,0x2D,0x00,0}, - {37,0x24,0x20,0x20,1}, {38,0x24,0x21,0x00,0}, {39,0x24,0x22,0x00,0}, - {40,0x44,0x20,0x20,1}, {41,0x44,0x21,0x00,0}, {42,0x44,0x22,0x00,0}, - {43,0x44,0x23,0x00,0}, {44,0x44,0x24,0x00,0}, {45,0x44,0x25,0x00,0}, - {46,0x44,0x26,0x00,0}, {47,0x44,0x27,0x00,0}, {48,0x44,0x28,0x00,0}, - {49,0x44,0x29,0x00,0}, {50,0x44,0x2A,0x00,0}, {51,0x44,0x2B,0x00,0}, - {52,0x44,0x2C,0x00,0}, {53,0x44,0x2D,0x00,0}, {54,0x44,0x2E,0x00,0}, - {55,0x64,0x2E,0x20,1}, {56,0x64,0x2F,0x00,0}, {57,0x64,0x30,0x00,0}, - {58,0x64,0x31,0x00,0}, {59,0x64,0x32,0x00,0}, {60,0x64,0x33,0x00,0}, - {61,0x64,0x34,0x00,0}, {62,0x64,0x35,0x00,0}, {63,0x64,0x36,0x00,0}, - {64,0x64,0x37,0x00,0}, {65,0x64,0x38,0x00,0}, {66,0x65,0x38,0x20,1}, - {67,0x66,0x38,0x20,1}, {68,0x67,0x38,0x20,1}, {69,0x68,0x38,0x20,1}, - {70,0x69,0x38,0x20,1}, {71,0x6A,0x38,0x20,1}, {72,0x6B,0x38,0x20,1}, - {73,0x6C,0x38,0x20,1}, {74,0x6D,0x38,0x20,1}, {75,0x6E,0x38,0x20,1}, - {76,0x6F,0x38,0x20,1}}; +boost::uint8_t gain_table_4000mhz_to_6000mhz[77][3] = { +{ 0x00, 0x00, 0x20 }, { 0x00, 0x00, 0x00 }, { 0x00, 0x00, 0x00 }, +{ 0x00, 0x00, 0x00 }, { 0x00, 0x00, 0x00 }, { 0x00, 0x01, 0x00 }, +{ 0x00, 0x02, 0x00 }, { 0x00, 0x03, 0x00 }, { 0x01, 0x01, 0x20 }, +{ 0x01, 0x02, 0x00 }, { 0x01, 0x03, 0x00 }, { 0x01, 0x04, 0x20 }, +{ 0x01, 0x05, 0x00 }, { 0x01, 0x06, 0x00 }, { 0x01, 0x07, 0x00 }, +{ 0x01, 0x08, 0x00 }, { 0x01, 0x09, 0x00 }, { 0x01, 0x0A, 0x00 }, +{ 0x01, 0x0B, 0x00 }, { 0x01, 0x0C, 0x00 }, { 0x02, 0x08, 0x20 }, +{ 0x02, 0x09, 0x00 }, { 0x02, 0x0A, 0x00 }, { 0x02, 0x0B, 0x20 }, +{ 0x02, 0x0C, 0x00 }, { 0x02, 0x0D, 0x00 }, { 0x02, 0x0E, 0x00 }, +{ 0x02, 0x0F, 0x00 }, { 0x02, 0x2A, 0x20 }, { 0x02, 0x2B, 0x00 }, +{ 0x04, 0x27, 0x20 }, { 0x04, 0x28, 0x00 }, { 0x04, 0x29, 0x00 }, +{ 0x04, 0x2A, 0x00 }, { 0x04, 0x2B, 0x00 }, { 0x04, 0x2C, 0x00 }, +{ 0x04, 0x2D, 0x00 }, { 0x24, 0x20, 0x20 }, { 0x24, 0x21, 0x00 }, +{ 0x24, 0x22, 0x00 }, { 0x44, 0x20, 0x20 }, { 0x44, 0x21, 0x00 }, +{ 0x44, 0x22, 0x00 }, { 0x44, 0x23, 0x00 }, { 0x44, 0x24, 0x00 }, +{ 0x44, 0x25, 0x00 }, { 0x44, 0x26, 0x00 }, { 0x44, 0x27, 0x00 }, +{ 0x44, 0x28, 0x00 }, { 0x44, 0x29, 0x00 }, { 0x44, 0x2A, 0x00 }, +{ 0x44, 0x2B, 0x00 }, { 0x44, 0x2C, 0x00 }, { 0x44, 0x2D, 0x00 }, +{ 0x44, 0x2E, 0x00 }, { 0x64, 0x2E, 0x20 }, { 0x64, 0x2F, 0x00 }, +{ 0x64, 0x30, 0x00 }, { 0x64, 0x31, 0x00 }, { 0x64, 0x32, 0x00 }, +{ 0x64, 0x33, 0x00 }, { 0x64, 0x34, 0x00 }, { 0x64, 0x35, 0x00 }, +{ 0x64, 0x36, 0x00 }, { 0x64, 0x37, 0x00 }, { 0x64, 0x38, 0x00 }, +{ 0x65, 0x38, 0x20 }, { 0x66, 0x38, 0x20 }, { 0x67, 0x38, 0x20 }, +{ 0x68, 0x38, 0x20 }, { 0x69, 0x38, 0x20 }, { 0x6A, 0x38, 0x20 }, +{ 0x6B, 0x38, 0x20 }, { 0x6C, 0x38, 0x20 }, { 0x6D, 0x38, 0x20 }, +{ 0x6E, 0x38, 0x20 }, { 0x6F, 0x38, 0x20 } }; #endif /* INCLUDED_AD9361_GAIN_TABLES_HPP */ diff --git a/host/lib/usrp/common/ad9361_driver/ad9361_synth_lut.h b/host/lib/usrp/common/ad9361_driver/ad9361_synth_lut.h index cb320e1f4..8155aae7c 100644 --- a/host/lib/usrp/common/ad9361_driver/ad9361_synth_lut.h +++ b/host/lib/usrp/common/ad9361_driver/ad9361_synth_lut.h @@ -1,25 +1,38 @@ // -// Copyright 2014 Ettus Research LLC +// Copyright 2014 Ettus Research +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. // #ifndef INCLUDED_AD9361_SYNTH_LUT_HPP #define INCLUDED_AD9361_SYNTH_LUT_HPP -double vco_index[53] = {12605000000, 12245000000, 11906000000, 11588000000, - 11288000000, 11007000000, 10742000000, 10492000000, - 10258000000, 10036000000, 9827800000, 9631100000, - 9445300000, 9269800000, 9103600000, 8946300000, - 8797000000, 8655300000, 8520600000, 8392300000, - 8269900000, 8153100000, 8041400000, 7934400000, - 7831800000, 7733200000, 7638400000, 7547100000, - 7459000000, 7374000000, 7291900000, 7212400000, - 7135500000, 7061000000, 6988700000, 6918600000, - 6850600000, 6784600000, 6720500000, 6658200000, - 6597800000, 6539200000, 6482300000, 6427000000, - 6373400000, 6321400000, 6270900000, 6222000000, - 6174500000, 6128400000, 6083600000, 6040100000, - 5997700000}; +double vco_index[53] = {12605000000.0, 12245000000.0, 11906000000.0, 11588000000.0, + 11288000000.0, 11007000000.0, 10742000000.0, 10492000000.0, + 10258000000.0, 10036000000.0, 9827800000.0, 9631100000.0, + 9445300000.0, 9269800000.0, 9103600000.0, 8946300000.0, + 8797000000.0, 8655300000.0, 8520600000.0, 8392300000.0, + 8269900000.0, 8153100000.0, 8041400000.0, 7934400000.0, + 7831800000.0, 7733200000.0, 7638400000.0, 7547100000.0, + 7459000000.0, 7374000000.0, 7291900000.0, 7212400000.0, + 7135500000.0, 7061000000.0, 6988700000.0, 6918600000.0, + 6850600000.0, 6784600000.0, 6720500000.0, 6658200000.0, + 6597800000.0, 6539200000.0, 6482300000.0, 6427000000.0, + 6373400000.0, 6321400000.0, 6270900000.0, 6222000000.0, + 6174500000.0, 6128400000.0, 6083600000.0, 6040100000.0, + 5997700000.0}; int synth_cal_lut[53][12] = { {10, 0, 4, 0, 15, 8, 8, 13, 4, 13, 15, 9}, {10, 0, 4, 0, 15, 8, 9, 13, 4, 13, 15, 9}, diff --git a/host/lib/usrp/cores/gpio_core_200.hpp b/host/lib/usrp/cores/gpio_core_200.hpp index 164437f40..e22834fd9 100644 --- a/host/lib/usrp/cores/gpio_core_200.hpp +++ b/host/lib/usrp/cores/gpio_core_200.hpp @@ -1,5 +1,5 @@ // -// Copyright 2011,2014 Ettus Research LLC +// Copyright 2011,2014,2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -20,10 +20,34 @@ #include <uhd/config.hpp> #include <uhd/usrp/dboard_iface.hpp> +#include <boost/assign.hpp> #include <boost/cstdint.hpp> #include <boost/utility.hpp> #include <boost/shared_ptr.hpp> #include <uhd/types/wb_iface.hpp> +#include <map> + +typedef enum { + GPIO_CTRL, + GPIO_DDR, + GPIO_OUT, + GPIO_ATR_0X, + GPIO_ATR_RX, + GPIO_ATR_TX, + GPIO_ATR_XX +} gpio_attr_t; + +typedef std::map<gpio_attr_t,std::string> gpio_attr_map_t; +static const gpio_attr_map_t gpio_attr_map = + boost::assign::map_list_of + (GPIO_CTRL, "CTRL") + (GPIO_DDR, "DDR") + (GPIO_OUT, "OUT") + (GPIO_ATR_0X, "ATR_0X") + (GPIO_ATR_RX, "ATR_RX") + (GPIO_ATR_TX, "ATR_TX") + (GPIO_ATR_XX, "ATR_XX") +; class gpio_core_200 : boost::noncopyable{ public: diff --git a/host/lib/usrp/dboard_eeprom.cpp b/host/lib/usrp/dboard_eeprom.cpp index f2bee47a9..3b56ae19a 100644 --- a/host/lib/usrp/dboard_eeprom.cpp +++ b/host/lib/usrp/dboard_eeprom.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010-2011 Ettus Research LLC +// Copyright 2010-2011,2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -15,6 +15,7 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // +#include <uhd/types/byte_vector.hpp> #include <uhd/usrp/dboard_eeprom.hpp> #include <uhd/exception.hpp> #include <uhd/utils/log.hpp> @@ -27,30 +28,6 @@ using namespace uhd; using namespace uhd::usrp; -/*********************************************************************** - * Utility functions - **********************************************************************/ - -//! create a string from a byte vector, return empty if invalid ascii -static const std::string bytes_to_string(const byte_vector_t &bytes){ - std::string out; - BOOST_FOREACH(boost::uint8_t byte, bytes){ - if (byte < 32 or byte > 127) return out; - out += byte; - } - return out; -} - -//! create a byte vector from a string, null terminate unless max length -static const byte_vector_t string_to_bytes(const std::string &string, size_t max_length){ - byte_vector_t bytes; - for (size_t i = 0; i < std::min(string.size(), max_length); i++){ - bytes.push_back(string[i]); - } - if (bytes.size() < max_length - 1) bytes.push_back('\0'); - return bytes; -} - //////////////////////////////////////////////////////////////////////// // format of daughterboard EEPROM // 00: 0xDB code for ``I'm a daughterboard'' diff --git a/host/lib/usrp/e100/e100_impl.cpp b/host/lib/usrp/e100/e100_impl.cpp index ac419e0e0..6d3c08534 100644 --- a/host/lib/usrp/e100/e100_impl.cpp +++ b/host/lib/usrp/e100/e100_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010-2012,2014 Ettus Research LLC +// Copyright 2010-2012,2014-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -28,6 +28,7 @@ #include <boost/functional/hash.hpp> #include <boost/assign/list_of.hpp> #include <fstream> +#include <iostream> #include <ctime> using namespace uhd; @@ -45,7 +46,7 @@ namespace fs = boost::filesystem; /*********************************************************************** * Discovery **********************************************************************/ -static device_addrs_t e100_find(const device_addr_t &hint){ +device_addrs_t e100_find(const device_addr_t &hint){ device_addrs_t e100_addrs; //return an empty list of addresses when type is set to non-usrp-e @@ -104,17 +105,10 @@ static const uhd::dict<std::string, std::string> model_to_fpga_file_name = boost ("E110", "usrp_e110_fpga.bin") ; -/*********************************************************************** - * Structors - **********************************************************************/ -e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ - _tree = property_tree::make(); - _type = device::USRP; - _ignore_cal_file = device_addr.has_key("ignore-cal-file"); - +std::string get_default_e1x0_fpga_image(const uhd::device_addr_t &device_addr){ //read the eeprom so we can determine the hardware - _dev_i2c_iface = e100_ctrl::make_dev_i2c_iface(E100_I2C_DEV_NODE); - const mboard_eeprom_t mb_eeprom(*_dev_i2c_iface, E100_EEPROM_MAP_KEY); + uhd::i2c_iface::sptr dev_i2c_iface = e100_ctrl::make_dev_i2c_iface(E100_I2C_DEV_NODE); + const mboard_eeprom_t mb_eeprom(*dev_i2c_iface, E100_EEPROM_MAP_KEY); //determine the model string for this device const std::string model = device_addr.get("model", mb_eeprom.get("model", "")); @@ -126,7 +120,21 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ ) % model)); //extract the fpga path and compute hash - const std::string default_fpga_file_name = model_to_fpga_file_name[model]; + return model_to_fpga_file_name[model]; +} + +/*********************************************************************** + * Structors + **********************************************************************/ +e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ + _tree = property_tree::make(); + _type = device::USRP; + _ignore_cal_file = device_addr.has_key("ignore-cal-file"); + + _dev_i2c_iface = e100_ctrl::make_dev_i2c_iface(E100_I2C_DEV_NODE); + const mboard_eeprom_t mb_eeprom(*_dev_i2c_iface, E100_EEPROM_MAP_KEY); + const std::string default_fpga_file_name = get_default_e1x0_fpga_image(device_addr); + const std::string model = device_addr["model"]; std::string e100_fpga_image; try{ e100_fpga_image = find_image_path(device_addr.get("fpga", default_fpga_file_name)); diff --git a/host/lib/usrp/e100/e100_impl.hpp b/host/lib/usrp/e100/e100_impl.hpp index 4efc21427..d00668224 100644 --- a/host/lib/usrp/e100/e100_impl.hpp +++ b/host/lib/usrp/e100/e100_impl.hpp @@ -29,6 +29,7 @@ #include "recv_packet_demuxer.hpp" #include <uhd/device.hpp> #include <uhd/property_tree.hpp> +#include <uhd/types/device_addr.hpp> #include <uhd/usrp/subdev_spec.hpp> #include <uhd/usrp/dboard_eeprom.hpp> #include <uhd/usrp/mboard_eeprom.hpp> @@ -68,6 +69,9 @@ uhd::usrp::dboard_iface::sptr make_e100_dboard_iface( e100_codec_ctrl::sptr codec ); +uhd::device_addrs_t e100_find(const uhd::device_addr_t &hint); +std::string get_default_e1x0_fpga_image(const uhd::device_addr_t &device_addr); + /*! * USRP-E100 implementation guts: * The implementation details are encapsulated here. diff --git a/host/lib/usrp/e100/fpga_downloader.cpp b/host/lib/usrp/e100/fpga_downloader.cpp index c9d77f560..9abde32f7 100644 --- a/host/lib/usrp/e100/fpga_downloader.cpp +++ b/host/lib/usrp/e100/fpga_downloader.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010-2011,2014 Ettus Research LLC +// Copyright 2010-2011,2014-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -17,8 +17,16 @@ #include <uhd/config.hpp> #ifdef UHD_DLL_EXPORTS +#include <boost/filesystem.hpp> +#include <boost/format.hpp> #include <uhd/exception.hpp> +#include <uhd/device.hpp> +#include <uhd/image_loader.hpp> +#include <uhd/types/device_addr.hpp> #include <uhd/utils/msg.hpp> +#include <uhd/utils/paths.hpp> +#include <uhd/utils/static.hpp> +#include "e100_impl.hpp" #else //special case when this file is externally included #include <stdexcept> #include <iostream> @@ -270,3 +278,34 @@ void e100_load_fpga(const std::string &bin_file){ } +#ifdef UHD_DLL_EXPORTS +namespace fs = boost::filesystem; + +static bool e100_image_loader(const uhd::image_loader::image_loader_args_t &image_loader_args){ + // Make sure this is an E1x0 + uhd::device_addrs_t devs = e100_find(uhd::device_addr_t()); + if(devs.size() == 0 or !image_loader_args.load_fpga) return false; + + std::string fpga_filename; + if(image_loader_args.fpga_path == ""){ + fpga_filename = uhd::find_image_path(get_default_e1x0_fpga_image(devs[0])); + } + else{ + if(not fs::exists(image_loader_args.fpga_path)){ + throw uhd::runtime_error(str(boost::format("The path \"%s\" does not exist.") + % image_loader_args.fpga_path)); + } + else fpga_filename = image_loader_args.fpga_path; + } + + e100_load_fpga(fpga_filename); + return true; +} + +UHD_STATIC_BLOCK(register_e100_image_loader){ + std::string recovery_instructions = "The default FPGA image will be loaded the next time " + "UHD uses this device."; + + uhd::image_loader::register_image_loader("e100", e100_image_loader, recovery_instructions); +} +#endif /* UHD_DLL_EXPORTS */ diff --git a/host/lib/usrp/e300/e300_common.cpp b/host/lib/usrp/e300/e300_common.cpp index db5b37055..29117e21f 100644 --- a/host/lib/usrp/e300/e300_common.cpp +++ b/host/lib/usrp/e300/e300_common.cpp @@ -1,5 +1,5 @@ // -// Copyright 2014 Ettus Research LLC +// Copyright 2014-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -14,8 +14,12 @@ // You should have received a copy of the GNU General Public License // along with this program. If not, see <http://www.gnu.org/licenses/>. // +#include <uhd/image_loader.hpp> #include <uhd/utils/msg.hpp> +#include <uhd/utils/paths.hpp> +#include <uhd/utils/static.hpp> +#include "e300_impl.hpp" #include "e300_fifo_config.hpp" #include "e300_fifo_config.hpp" @@ -23,6 +27,7 @@ #include <boost/filesystem.hpp> #include <fstream> +#include <string> namespace uhd { namespace usrp { namespace e300 { @@ -54,6 +59,34 @@ void load_fpga_image(const std::string &path) UHD_MSG(status) << " done" << std::endl; } +static bool e300_image_loader(const image_loader::image_loader_args_t &image_loader_args) { + // Make sure this is an E3x0 and we don't want to use anything connected + uhd::device_addrs_t devs = e300_find(image_loader_args.args); + if(devs.size() == 0 or !image_loader_args.load_fpga) return false; + + std::string fpga_filename, idle_image; // idle_image never used, just needed for function + if(image_loader_args.fpga_path == "") { + get_e3x0_fpga_images(devs[0], fpga_filename, idle_image); + } + else { + if(not boost::filesystem::exists(image_loader_args.fpga_path)) { + throw uhd::runtime_error(str(boost::format("The path \"%s\" does not exist.") + % image_loader_args.fpga_path)); + } + else fpga_filename = image_loader_args.fpga_path; + } + + load_fpga_image(fpga_filename); + return true; +} + +UHD_STATIC_BLOCK(register_e300_image_loader) { + std::string recovery_instructions = "The default FPGA image will be loaded the next " + "time UHD uses this device."; + + image_loader::register_image_loader("e3x0", e300_image_loader, recovery_instructions); +} + } }}} diff --git a/host/lib/usrp/e300/e300_defaults.hpp b/host/lib/usrp/e300/e300_defaults.hpp index d409062c5..32b3c33ef 100644 --- a/host/lib/usrp/e300/e300_defaults.hpp +++ b/host/lib/usrp/e300/e300_defaults.hpp @@ -23,8 +23,7 @@ namespace uhd { namespace usrp { namespace e300 { static const double DEFAULT_TICK_RATE = 32e6; -static const double MAX_TICK_RATE = 50e6; -static const double MIN_TICK_RATE = 1e6; +static const double MIN_TICK_RATE = 10e6; static const double DEFAULT_TX_SAMP_RATE = 1.0e6; static const double DEFAULT_RX_SAMP_RATE = 1.0e6; @@ -73,7 +72,7 @@ public: digital_interface_delays_t get_digital_interface_timing() { digital_interface_delays_t delays; delays.rx_clk_delay = 0; - delays.rx_data_delay = 0xF; + delays.rx_data_delay = 0x8; delays.tx_clk_delay = 0; delays.tx_data_delay = 0xF; return delays; diff --git a/host/lib/usrp/e300/e300_fpga_defs.hpp b/host/lib/usrp/e300/e300_fpga_defs.hpp index eea4d7f63..fbbca329a 100644 --- a/host/lib/usrp/e300/e300_fpga_defs.hpp +++ b/host/lib/usrp/e300/e300_fpga_defs.hpp @@ -21,7 +21,7 @@ namespace uhd { namespace usrp { namespace e300 { namespace fpga { static const size_t NUM_RADIOS = 2; -static const boost::uint32_t COMPAT_MAJOR = 8; +static const boost::uint32_t COMPAT_MAJOR = 9; static const boost::uint32_t COMPAT_MINOR = 0; }}}} // namespace diff --git a/host/lib/usrp/e300/e300_impl.cpp b/host/lib/usrp/e300/e300_impl.cpp index a08168eab..e8a201916 100644 --- a/host/lib/usrp/e300/e300_impl.cpp +++ b/host/lib/usrp/e300/e300_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2013-2014 Ettus Research LLC +// Copyright 2013-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -121,7 +121,7 @@ static bool is_loopback(const if_addrs_t &if_addrs) return if_addrs.inet == asio::ip::address_v4::loopback().to_string(); } -static device_addrs_t e300_find(const device_addr_t &multi_dev_hint) +device_addrs_t e300_find(const device_addr_t &multi_dev_hint) { // handle multi device discovery device_addrs_t hints = separate_device_addr(multi_dev_hint); @@ -268,6 +268,36 @@ static device::sptr e300_make(const device_addr_t &device_addr) return device::sptr(new e300_impl(device_addr)); } +// Common code used by e300_impl and e300_image_loader +void get_e3x0_fpga_images(const uhd::device_addr_t &device_addr, + std::string &fpga_image, + std::string &idle_image){ + const boost::uint16_t pid = boost::lexical_cast<boost::uint16_t>( + device_addr["product"]); + + //extract the FPGA path for the e300 + switch(e300_eeprom_manager::get_mb_type(pid)) { + case e300_eeprom_manager::USRP_E310_MB: + fpga_image = device_addr.cast<std::string>("fpga", + find_image_path(E310_FPGA_FILE_NAME)); + idle_image = find_image_path(E310_FPGA_IDLE_FILE_NAME); + break; + case e300_eeprom_manager::USRP_E300_MB: + fpga_image = device_addr.cast<std::string>("fpga", + find_image_path(E300_FPGA_FILE_NAME)); + idle_image = find_image_path(E300_FPGA_IDLE_FILE_NAME); + break; + case e300_eeprom_manager::UNKNOWN: + default: + UHD_MSG(warning) << "Unknown motherboard type, loading e300 image." + << std::endl; + fpga_image = device_addr.cast<std::string>("fpga", + find_image_path(E300_FPGA_FILE_NAME)); + idle_image = find_image_path(E300_FPGA_IDLE_FILE_NAME); + break; + } +} + /*********************************************************************** * Structors **********************************************************************/ @@ -286,33 +316,10 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr) if (_xport_path == AXI) { _do_not_reload = device_addr.has_key("no_reload_fpga"); if (not _do_not_reload) { - // Load FPGA image if provided via args - const boost::uint16_t pid = boost::lexical_cast<boost::uint16_t>( - device_addr["product"]); - std::string fpga_image; - - //extract the FPGA path for the e300 - switch(e300_eeprom_manager::get_mb_type(pid)) { - case e300_eeprom_manager::USRP_E310_MB: - fpga_image = device_addr.cast<std::string>("fpga", - find_image_path(E310_FPGA_FILE_NAME)); - _idle_image = find_image_path(E310_FPGA_IDLE_FILE_NAME); - break; - case e300_eeprom_manager::USRP_E300_MB: - fpga_image = device_addr.cast<std::string>("fpga", - find_image_path(E300_FPGA_FILE_NAME)); - _idle_image = find_image_path(E300_FPGA_IDLE_FILE_NAME); - break; - case e300_eeprom_manager::UNKNOWN: - default: - UHD_MSG(warning) << "Unknown motherboard type, loading e300 image." - << std::endl; - fpga_image = device_addr.cast<std::string>("fpga", - find_image_path(E300_FPGA_FILE_NAME)); - _idle_image = find_image_path(E300_FPGA_IDLE_FILE_NAME); - break; - } + get_e3x0_fpga_images(device_addr, + fpga_image, + _idle_image); common::load_fpga_image(fpga_image); } } @@ -484,15 +491,14 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr) // internal gpios //////////////////////////////////////////////////////////////////// gpio_core_200::sptr fp_gpio = gpio_core_200::make(_radio_perifs[0].ctrl, TOREG(SR_FP_GPIO), RB32_FP_GPIO); - const std::vector<std::string> gpio_attrs = boost::assign::list_of("CTRL")("DDR")("OUT")("ATR_0X")("ATR_RX")("ATR_TX")("ATR_XX"); - BOOST_FOREACH(const std::string &attr, gpio_attrs) + BOOST_FOREACH(const gpio_attr_map_t::value_type attr, gpio_attr_map) { - _tree->create<boost::uint32_t>(mb_path / "gpio" / "INT0" / attr) - .subscribe(boost::bind(&e300_impl::_set_internal_gpio, this, fp_gpio, attr, _1)) + _tree->create<boost::uint32_t>(mb_path / "gpio" / "INT0" / attr.second) + .subscribe(boost::bind(&e300_impl::_set_internal_gpio, this, fp_gpio, attr.first, _1)) .set(0); } _tree->create<boost::uint8_t>(mb_path / "gpio" / "INT0" / "READBACK") - .publish(boost::bind(&e300_impl::_get_internal_gpio, this, fp_gpio, "READBACK")); + .publish(boost::bind(&e300_impl::_get_internal_gpio, this, fp_gpio)); //////////////////////////////////////////////////////////////////// @@ -598,32 +604,35 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr) boost::this_thread::sleep(boost::posix_time::seconds(1)); } -boost::uint8_t e300_impl::_get_internal_gpio( - gpio_core_200::sptr gpio, - const std::string &) +boost::uint8_t e300_impl::_get_internal_gpio(gpio_core_200::sptr gpio) { return boost::uint32_t(gpio->read_gpio(dboard_iface::UNIT_RX)); } void e300_impl::_set_internal_gpio( gpio_core_200::sptr gpio, - const std::string &attr, + const gpio_attr_t attr, const boost::uint32_t value) { - if (attr == "CTRL") + switch (attr) + { + case GPIO_CTRL: return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value); - else if (attr == "DDR") + case GPIO_DDR: return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value); - else if (attr == "OUT") + case GPIO_OUT: return gpio->set_gpio_out(dboard_iface::UNIT_RX, value); - else if (attr == "ATR_0X") + case GPIO_ATR_0X: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value); - else if (attr == "ATR_RX") + case GPIO_ATR_RX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value); - else if (attr == "ATR_TX") + case GPIO_ATR_TX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value); - else if (attr == "ATR_XX") + case GPIO_ATR_XX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value); + default: + UHD_THROW_INVALID_CODE_PATH(); + } } uhd::sensor_value_t e300_impl::_get_fe_pll_lock(const bool is_tx) @@ -665,6 +674,17 @@ void e300_impl::_enforce_tick_rate_limits( % direction )); } + // Minimum rate restriction due to MMCM used in capture interface to AD9361. + // Xilinx Artix-7 FPGA MMCM minimum input frequency is 10 MHz. + const double min_tick_rate = uhd::usrp::e300::MIN_TICK_RATE / ((chan_count <= 1) ? 1 : 2); + if (tick_rate - min_tick_rate < 0.0) + { + throw uhd::value_error(boost::str( + boost::format("current master clock rate (%.6f MHz) set below minimum possible master clock rate (%.6f MHz)") + % (tick_rate/1e6) + % (min_tick_rate/1e6) + )); + } } } @@ -1051,6 +1071,8 @@ void e300_impl::_setup_radio(const size_t dspno) _tree->create<int>(rf_fe_path / "sensors"); //empty TODO _tree->create<sensor_value_t>(rf_fe_path / "sensors" / "lo_locked") .publish(boost::bind(&e300_impl::_get_fe_pll_lock, this, direction == "tx")); + _tree->create<sensor_value_t>(rf_fe_path / "sensors" / "temp") + .publish(boost::bind(&ad9361_ctrl::get_temperature, _codec_ctrl)); BOOST_FOREACH(const std::string &name, ad9361_ctrl::get_gain_names(key)) { _tree->create<meta_range_t>(rf_fe_path / "gains" / name / "range") @@ -1076,6 +1098,18 @@ void e300_impl::_setup_radio(const size_t dspno) _tree->create<meta_range_t>(rf_fe_path / "freq" / "range") .publish(boost::bind(&ad9361_ctrl::get_rf_freq_range)); + //only in local mode + if(_xport_path == AXI) { + //add all frontend filters + std::vector<std::string> filter_names = _codec_ctrl->get_filter_names(key); + for(size_t i = 0;i < filter_names.size(); i++) + { + _tree->create<filter_info_base::sptr>(rf_fe_path / "filters" / filter_names[i] / "value" ) + .publish(boost::bind(&ad9361_ctrl::get_filter, _codec_ctrl, key, filter_names[i])) + .subscribe(boost::bind(&ad9361_ctrl::set_filter, _codec_ctrl, key, filter_names[i], _1)); + } + } + //setup RX related stuff if (key[0] == 'R') { static const std::vector<std::string> ants = boost::assign::list_of("TX/RX")("RX2"); diff --git a/host/lib/usrp/e300/e300_impl.hpp b/host/lib/usrp/e300/e300_impl.hpp index 7f83c16ed..3ed133489 100644 --- a/host/lib/usrp/e300/e300_impl.hpp +++ b/host/lib/usrp/e300/e300_impl.hpp @@ -1,5 +1,5 @@ // -// Copyright 2013-2014 Ettus Research LLC +// Copyright 2013-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -20,6 +20,7 @@ #include <uhd/device.hpp> #include <uhd/property_tree.hpp> +#include <uhd/types/device_addr.hpp> #include <uhd/usrp/subdev_spec.hpp> #include <uhd/usrp/mboard_eeprom.hpp> #include <uhd/usrp/dboard_eeprom.hpp> @@ -28,6 +29,7 @@ #include <uhd/types/sensors.hpp> #include <boost/weak_ptr.hpp> #include <boost/thread/mutex.hpp> +#include <string> #include "e300_fifo_config.hpp" #include "radio_ctrl_core_3000.hpp" #include "rx_frontend_core_200.hpp" @@ -98,6 +100,10 @@ static const size_t E300_R1_CTRL_STREAM = (1 << 2) | E300_RADIO_DEST_PREFIX_C static const size_t E300_R1_TX_DATA_STREAM = (1 << 2) | E300_RADIO_DEST_PREFIX_TX; static const size_t E300_R1_RX_DATA_STREAM = (1 << 2) | E300_RADIO_DEST_PREFIX_RX; +uhd::device_addrs_t e300_find(const uhd::device_addr_t &multi_dev_hint); +void get_e3x0_fpga_images(const uhd::device_addr_t &device_args, + std::string &fpga_image, + std::string &idle_image); /*! * USRP-E300 implementation guts: @@ -267,13 +273,11 @@ private: // methods uhd::sensor_value_t _get_fe_pll_lock(const bool is_tx); // internal gpios - boost::uint8_t _get_internal_gpio( - gpio_core_200::sptr, - const std::string &); + boost::uint8_t _get_internal_gpio(gpio_core_200::sptr); void _set_internal_gpio( gpio_core_200::sptr gpio, - const std::string &attr, + const gpio_attr_t attr, const boost::uint32_t value); private: // members diff --git a/host/lib/usrp/e300/e300_network.cpp b/host/lib/usrp/e300/e300_network.cpp index 408f9e62d..d68dc4541 100644 --- a/host/lib/usrp/e300/e300_network.cpp +++ b/host/lib/usrp/e300/e300_network.cpp @@ -230,6 +230,27 @@ static void e300_codec_ctrl_tunnel( case codec_xact_t::ACTION_GET_RSSI: out->rssi = _codec_ctrl->get_rssi(which_str).to_real(); break; + case codec_xact_t::ACTION_GET_TEMPERATURE: + out->temp = _codec_ctrl->get_temperature().to_real(); + break; + case codec_xact_t::ACTION_SET_DC_OFFSET_AUTO: + _codec_ctrl->set_dc_offset_auto(which_str, in->use_dc_correction == 1); + break; + case codec_xact_t::ACTION_SET_IQ_BALANCE_AUTO: + _codec_ctrl->set_iq_balance_auto(which_str, in->use_iq_correction == 1); + case codec_xact_t::ACTION_SET_AGC: + _codec_ctrl->set_agc(which_str, in->use_agc == 1); + break; + case codec_xact_t::ACTION_SET_AGC_MODE: + if(in->agc_mode == 0) { + _codec_ctrl->set_agc_mode(which_str, "slow"); + } else if (in->agc_mode == 1) { + _codec_ctrl->set_agc_mode(which_str, "fast"); + } + break; + case codec_xact_t::ACTION_SET_BW: + out->bw = _codec_ctrl->set_bw_filter(which_str, in->bw); + break; default: UHD_MSG(status) << "Got unknown request?!" << std::endl; //Zero out actions to fail this request on client diff --git a/host/lib/usrp/e300/e300_remote_codec_ctrl.cpp b/host/lib/usrp/e300/e300_remote_codec_ctrl.cpp index 6742f5f86..9708634dd 100644 --- a/host/lib/usrp/e300/e300_remote_codec_ctrl.cpp +++ b/host/lib/usrp/e300/e300_remote_codec_ctrl.cpp @@ -130,10 +130,118 @@ public: _args.bits = uhd::htonx<boost::uint32_t>(0); _transact(); - return sensor_value_t("RSSI", _retval.rssi, "dB"); } + sensor_value_t get_temperature() + { + _clear(); + _args.action = uhd::htonx<boost::uint32_t>(transaction_t::ACTION_GET_TEMPERATURE); + _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_NONE); /*Unused*/ + _args.bits = uhd::htonx<boost::uint32_t>(0); + + _transact(); + return sensor_value_t("temp", _retval.temp, "C"); + } + + void set_dc_offset_auto(const std::string &which, const bool on) + { + _clear(); + _args.action = uhd::htonx<boost::uint32_t>(transaction_t::ACTION_SET_DC_OFFSET_AUTO); + if (which == "TX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX1); + else if (which == "TX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX2); + else if (which == "RX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX1); + else if (which == "RX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX2); + else throw std::runtime_error("e300_remote_codec_ctrl_impl incorrect chain string."); + _args.use_dc_correction = on ? 1 : 0; + + _transact(); + } + + void set_iq_balance_auto(const std::string &which, const bool on) + { + _clear(); + _args.action = uhd::htonx<boost::uint32_t>(transaction_t::ACTION_SET_IQ_BALANCE_AUTO); + if (which == "TX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX1); + else if (which == "TX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX2); + else if (which == "RX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX1); + else if (which == "RX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX2); + else throw std::runtime_error("e300_remote_codec_ctrl_impl incorrect chain string."); + _args.use_iq_correction = on ? 1 : 0; + + _transact(); + } + + void set_agc(const std::string &which, bool enable) + { + _clear(); + _args.action = uhd::htonx<boost::uint32_t>(transaction_t::ACTION_SET_AGC); + if (which == "TX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX1); + else if (which == "TX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX2); + else if (which == "RX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX1); + else if (which == "RX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX2); + else throw std::runtime_error("e300_remote_codec_ctrl_impl incorrect chain string."); + _args.use_agc = enable ? 1 : 0; + + _transact(); + } + + void set_agc_mode(const std::string &which, const std::string &mode) + { + _clear(); + _args.action = uhd::htonx<boost::uint32_t>(transaction_t::ACTION_SET_AGC_MODE); + + if (which == "TX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX1); + else if (which == "TX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX2); + else if (which == "RX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX1); + else if (which == "RX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX2); + else throw std::runtime_error("e300_remote_codec_ctrl_impl incorrect chain string."); + + if(mode == "slow") { + _args.agc_mode = 0; + } else if (mode == "fast") { + _args.agc_mode = 1; + } else { + throw std::runtime_error("e300_remote_codec_ctrl_impl incorrect agc mode."); + } + + _transact(); + } + + //! set the filter bandwidth for the frontend's analog low pass + double set_bw_filter(const std::string &which, const double bw) + { + _clear(); + _args.action = uhd::htonx<boost::uint32_t>(transaction_t::ACTION_SET_BW); + if (which == "TX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX1); + else if (which == "TX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX2); + else if (which == "RX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX1); + else if (which == "RX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX2); + else throw std::runtime_error("e300_remote_codec_ctrl_impl incorrect chain string."); + _args.bw = bw; + + _transact(); + return _retval.bw; + } + + //! List all available filters by name + std::vector<std::string> get_filter_names(const std::string &) + { + UHD_THROW_INVALID_CODE_PATH(); + } + + //! Return a list of all filters + filter_info_base::sptr get_filter(const std::string &, const std::string &) + { + UHD_THROW_INVALID_CODE_PATH(); + } + + //! Write back a filter + void set_filter(const std::string &, const std::string &, const filter_info_base::sptr) + { + UHD_THROW_INVALID_CODE_PATH(); + } + private: void _transact() { { diff --git a/host/lib/usrp/e300/e300_remote_codec_ctrl.hpp b/host/lib/usrp/e300/e300_remote_codec_ctrl.hpp index e21f2ef95..43723e0d5 100644 --- a/host/lib/usrp/e300/e300_remote_codec_ctrl.hpp +++ b/host/lib/usrp/e300/e300_remote_codec_ctrl.hpp @@ -34,6 +34,12 @@ public: double gain; double freq; double rssi; + double temp; + double bw; + boost::uint32_t use_dc_correction; + boost::uint32_t use_iq_correction; + boost::uint32_t use_agc; + boost::uint32_t agc_mode; boost::uint64_t bits; }; @@ -44,7 +50,13 @@ public: static const boost::uint32_t ACTION_TUNE = 13; static const boost::uint32_t ACTION_SET_LOOPBACK = 14; static const boost::uint32_t ACTION_GET_RSSI = 15; - static const boost::uint32_t ACTION_GET_FREQ = 16; + static const boost::uint32_t ACTION_GET_TEMPERATURE = 16; + static const boost::uint32_t ACTION_SET_DC_OFFSET_AUTO = 17; + static const boost::uint32_t ACTION_SET_IQ_BALANCE_AUTO = 18; + static const boost::uint32_t ACTION_SET_AGC = 19; + static const boost::uint32_t ACTION_SET_AGC_MODE = 20; + static const boost::uint32_t ACTION_SET_BW = 21; + static const boost::uint32_t ACTION_GET_FREQ = 22; //Values for "which" static const boost::uint32_t CHAIN_NONE = 0; diff --git a/host/lib/usrp/mboard_eeprom.cpp b/host/lib/usrp/mboard_eeprom.cpp index 68c084589..f60182c76 100644 --- a/host/lib/usrp/mboard_eeprom.cpp +++ b/host/lib/usrp/mboard_eeprom.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010-2013 Ettus Research LLC +// Copyright 2010-2013,2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -16,6 +16,7 @@ // #include <uhd/usrp/mboard_eeprom.hpp> +#include <uhd/types/byte_vector.hpp> #include <uhd/types/mac_addr.hpp> #include <uhd/utils/byteswap.hpp> #include <boost/asio/ip/address_v4.hpp> @@ -39,32 +40,6 @@ static const size_t NAME_MAX_LEN = 32 - SERIAL_LEN; * Utility functions **********************************************************************/ -//! A wrapper around std::copy that takes ranges instead of iterators. -template<typename RangeSrc, typename RangeDst> inline -void byte_copy(const RangeSrc &src, RangeDst &dst){ - std::copy(boost::begin(src), boost::end(src), boost::begin(dst)); -} - -//! create a string from a byte vector, return empty if invalid ascii -static const std::string bytes_to_string(const byte_vector_t &bytes){ - std::string out; - BOOST_FOREACH(boost::uint8_t byte, bytes){ - if (byte < 32 or byte > 127) return out; - out += byte; - } - return out; -} - -//! create a byte vector from a string, null terminate unless max length -static const byte_vector_t string_to_bytes(const std::string &string, size_t max_length){ - byte_vector_t bytes; - for (size_t i = 0; i < std::min(string.size(), max_length); i++){ - bytes.push_back(string[i]); - } - if (bytes.size() < max_length - 1) bytes.push_back('\0'); - return bytes; -} - //! convert a string to a byte vector to write to eeprom static byte_vector_t string_to_uint16_bytes(const std::string &num_str){ const boost::uint16_t num = boost::lexical_cast<boost::uint16_t>(num_str); @@ -238,7 +213,8 @@ struct x300_eeprom_map //indentifying numbers unsigned char revision[2]; unsigned char product[2]; - boost::uint8_t _pad0[4]; + unsigned char revision_compat[2]; + boost::uint8_t _pad0[2]; //all the mac addrs boost::uint8_t mac_addr0[6]; @@ -264,6 +240,11 @@ static void load_x300(mboard_eeprom_t &mb_eeprom, i2c_iface &iface) iface.read_eeprom(X300_EEPROM_ADDR, offsetof(x300_eeprom_map, revision), 2) ); + //extract the revision compat number + mb_eeprom["revision_compat"] = uint16_bytes_to_string( + iface.read_eeprom(X300_EEPROM_ADDR, offsetof(x300_eeprom_map, revision_compat), 2) + ); + //extract the product code mb_eeprom["product"] = uint16_bytes_to_string( iface.read_eeprom(X300_EEPROM_ADDR, offsetof(x300_eeprom_map, product), 2) @@ -310,6 +291,12 @@ static void store_x300(const mboard_eeprom_t &mb_eeprom, i2c_iface &iface) string_to_uint16_bytes(mb_eeprom["revision"]) ); + //parse the revision compat number + if (mb_eeprom.has_key("revision_compat")) iface.write_eeprom( + X300_EEPROM_ADDR, offsetof(x300_eeprom_map, revision_compat), + string_to_uint16_bytes(mb_eeprom["revision_compat"]) + ); + //parse the product code if (mb_eeprom.has_key("product")) iface.write_eeprom( X300_EEPROM_ADDR, offsetof(x300_eeprom_map, product), diff --git a/host/lib/usrp/multi_usrp.cpp b/host/lib/usrp/multi_usrp.cpp index 794438b90..1866255c9 100644 --- a/host/lib/usrp/multi_usrp.cpp +++ b/host/lib/usrp/multi_usrp.cpp @@ -30,6 +30,8 @@ #include <boost/thread.hpp> #include <boost/foreach.hpp> #include <boost/format.hpp> +#include <boost/algorithm/string.hpp> +#include <algorithm> #include <cmath> using namespace uhd; @@ -431,6 +433,9 @@ public: ******************************************************************/ void set_master_clock_rate(double rate, size_t mboard){ if (mboard != ALL_MBOARDS){ + if (_tree->exists(mb_root(mboard) / "auto_tick_rate")) { + _tree->access<bool>(mb_root(mboard) / "auto_tick_rate").set(false); + } _tree->access<double>(mb_root(mboard) / "tick_rate").set(rate); return; } @@ -821,6 +826,26 @@ public: } void set_rx_gain(double gain, const std::string &name, size_t chan){ + /* Check if any AGC mode is enable and if so warn the user */ + if (chan != ALL_CHANS) { + if (_tree->exists(rx_rf_fe_root(chan) / "gain" / "agc")) { + bool agc = _tree->access<bool>(rx_rf_fe_root(chan) / "gain" / "agc" / "enable").get(); + if(agc) { + UHD_MSG(warning) << "AGC enabled for this channel. Setting will be ignored." << std::endl; + } + } + } else { + for (size_t c = 0; c < get_rx_num_channels(); c++){ + if (_tree->exists(rx_rf_fe_root(c) / "gain" / "agc")) { + bool agc = _tree->access<bool>(rx_rf_fe_root(chan) / "gain" / "agc" / "enable").get(); + if(agc) { + UHD_MSG(warning) << "AGC enabled for this channel. Setting will be ignored." << std::endl; + } + } + } + } + /* Apply gain setting. + * If device is in AGC mode it will ignore the setting. */ try { return rx_gain_group(chan)->set_value(gain, name); } catch (uhd::key_error &) { @@ -828,6 +853,32 @@ public: } } + void set_normalized_rx_gain(double gain, size_t chan = 0) + { + if (gain > 1.0 || gain < 0.0) { + throw uhd::runtime_error("Normalized gain out of range, must be in [0, 1]."); + } + gain_range_t gain_range = get_rx_gain_range(ALL_GAINS, chan); + double abs_gain = (gain * (gain_range.stop() - gain_range.start())) + gain_range.start(); + set_rx_gain(abs_gain, ALL_GAINS, chan); + } + + void set_rx_agc(bool enable, size_t chan = 0) + { + if (chan != ALL_CHANS){ + if (_tree->exists(rx_rf_fe_root(chan) / "gain" / "agc" / "enable")) { + _tree->access<bool>(rx_rf_fe_root(chan) / "gain" / "agc" / "enable").set(enable); + } else { + UHD_MSG(warning) << "AGC is not available on this device." << std::endl; + } + return; + } + for (size_t c = 0; c < get_rx_num_channels(); c++){ + this->set_rx_agc(enable, c); + } + + } + double get_rx_gain(const std::string &name, size_t chan){ try { return rx_gain_group(chan)->get_value(name); @@ -836,6 +887,21 @@ public: } } + double get_normalized_rx_gain(size_t chan) + { + gain_range_t gain_range = get_rx_gain_range(ALL_GAINS, chan); + double gain_range_width = gain_range.stop() - gain_range.start(); + // In case we have a device without a range of gains: + if (gain_range_width == 0.0) { + return 0; + } + double norm_gain = (get_rx_gain(ALL_GAINS, chan) - gain_range.start()) / gain_range_width; + // Avoid rounding errors: + if (norm_gain > 1.0) return 1.0; + if (norm_gain < 0.0) return 0.0; + return norm_gain; + } + gain_range_t get_rx_gain_range(const std::string &name, size_t chan){ try { return rx_gain_group(chan)->get_range(name); @@ -888,6 +954,9 @@ public: if (chan != ALL_CHANS){ if (_tree->exists(rx_fe_root(chan) / "dc_offset" / "enable")) { _tree->access<bool>(rx_fe_root(chan) / "dc_offset" / "enable").set(enb); + } else if (_tree->exists(rx_rf_fe_root(chan) / "dc_offset" / "enable")) { + /*For B2xx devices the dc-offset correction is implemented in the rf front-end*/ + _tree->access<bool>(rx_rf_fe_root(chan) / "dc_offset" / "enable").set(enb); } else { UHD_MSG(warning) << "Setting DC offset compensation is not possible on this device." << std::endl; } @@ -912,6 +981,20 @@ public: } } + void set_rx_iq_balance(const bool enb, size_t chan){ + if (chan != ALL_CHANS){ + if (_tree->exists(rx_rf_fe_root(chan) / "iq_balance" / "enable")) { + _tree->access<bool>(rx_rf_fe_root(chan) / "iq_balance" / "enable").set(enb); + } else { + UHD_MSG(warning) << "Setting IQ imbalance compensation is not possible on this device." << std::endl; + } + return; + } + for (size_t c = 0; c < get_rx_num_channels(); c++){ + this->set_rx_iq_balance(enb, c); + } + } + void set_rx_iq_balance(const std::complex<double> &offset, size_t chan){ if (chan != ALL_CHANS){ if (_tree->exists(rx_fe_root(chan) / "iq_balance" / "value")) { @@ -926,6 +1009,87 @@ public: } } + std::vector<std::string> get_filter_names(const std::string &search_mask) + { + std::vector<std::string> ret; + + for (size_t chan = 0; chan < get_rx_num_channels(); chan++){ + + if (_tree->exists(rx_rf_fe_root(chan) / "filters")) { + std::vector<std::string> names = _tree->list(rx_rf_fe_root(chan) / "filters"); + for(size_t i = 0; i < names.size(); i++) + { + std::string name = rx_rf_fe_root(chan) / "filters" / names[i]; + if((search_mask.empty()) or boost::contains(name, search_mask)) { + ret.push_back(name); + } + } + } + if (_tree->exists(rx_dsp_root(chan) / "filters")) { + std::vector<std::string> names = _tree->list(rx_dsp_root(chan) / "filters"); + for(size_t i = 0; i < names.size(); i++) + { + std::string name = rx_dsp_root(chan) / "filters" / names[i]; + if((search_mask.empty()) or (boost::contains(name, search_mask))) { + ret.push_back(name); + } + } + } + + } + + for (size_t chan = 0; chan < get_tx_num_channels(); chan++){ + + if (_tree->exists(tx_rf_fe_root(chan) / "filters")) { + std::vector<std::string> names = _tree->list(tx_rf_fe_root(chan) / "filters"); + for(size_t i = 0; i < names.size(); i++) + { + std::string name = tx_rf_fe_root(chan) / "filters" / names[i]; + if((search_mask.empty()) or (boost::contains(name, search_mask))) { + ret.push_back(name); + } + } + } + if (_tree->exists(rx_dsp_root(chan) / "filters")) { + std::vector<std::string> names = _tree->list(tx_dsp_root(chan) / "filters"); + for(size_t i = 0; i < names.size(); i++) + { + std::string name = tx_dsp_root(chan) / "filters" / names[i]; + if((search_mask.empty()) or (boost::contains(name, search_mask))) { + ret.push_back(name); + } + } + } + + } + + return ret; + } + + filter_info_base::sptr get_filter(const std::string &path) + { + std::vector<std::string> possible_names = get_filter_names(""); + std::vector<std::string>::iterator it; + it = find(possible_names.begin(), possible_names.end(), path); + if (it == possible_names.end()) { + throw uhd::runtime_error("Attempting to get non-existing filter: "+path); + } + + return _tree->access<filter_info_base::sptr>(path / "value").get(); + } + + void set_filter(const std::string &path, filter_info_base::sptr filter) + { + std::vector<std::string> possible_names = get_filter_names(""); + std::vector<std::string>::iterator it; + it = find(possible_names.begin(), possible_names.end(), path); + if (it == possible_names.end()) { + throw uhd::runtime_error("Attempting to set non-existing filter: "+path); + } + + _tree->access<filter_info_base::sptr>(path / "value").set(filter); + } + /******************************************************************* * TX methods ******************************************************************/ @@ -1029,6 +1193,17 @@ public: } } + void set_normalized_tx_gain(double gain, size_t chan = 0) + { + if (gain > 1.0 || gain < 0.0) { + throw uhd::runtime_error("Normalized gain out of range, must be in [0, 1]."); + } + gain_range_t gain_range = get_tx_gain_range(ALL_GAINS, chan); + double abs_gain = (gain * (gain_range.stop() - gain_range.start())) + gain_range.start(); + set_tx_gain(abs_gain, ALL_GAINS, chan); + } + + double get_tx_gain(const std::string &name, size_t chan){ try { return tx_gain_group(chan)->get_value(name); @@ -1037,6 +1212,21 @@ public: } } + double get_normalized_tx_gain(size_t chan) + { + gain_range_t gain_range = get_tx_gain_range(ALL_GAINS, chan); + double gain_range_width = gain_range.stop() - gain_range.start(); + // In case we have a device without a range of gains: + if (gain_range_width == 0.0) { + return 0.0; + } + double norm_gain = (get_rx_gain(ALL_GAINS, chan) - gain_range.start()) / gain_range_width; + // Avoid rounding errors: + if (norm_gain > 1.0) return 1.0; + if (norm_gain < 0.0) return 0.0; + return norm_gain; + } + gain_range_t get_tx_gain_range(const std::string &name, size_t chan){ try { return tx_gain_group(chan)->get_range(name); diff --git a/host/lib/usrp/usrp2/CMakeLists.txt b/host/lib/usrp/usrp2/CMakeLists.txt index c6257c7fe..bd302895b 100644 --- a/host/lib/usrp/usrp2/CMakeLists.txt +++ b/host/lib/usrp/usrp2/CMakeLists.txt @@ -1,5 +1,5 @@ # -# Copyright 2011-2012,2014 Ettus Research LLC +# Copyright 2011-2012,2014-2015 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -25,18 +25,6 @@ LIBUHD_REGISTER_COMPONENT("USRP2" ENABLE_USRP2 ON "ENABLE_LIBUHD" OFF) IF(ENABLE_USRP2) - ######################################################################## - # Define UHD_PKG_DATA_PATH for usrp2_iface.cpp - ######################################################################## - FILE(TO_NATIVE_PATH ${CMAKE_INSTALL_PREFIX} UHD_PKG_PATH) - STRING(REPLACE "\\" "\\\\" UHD_PKG_PATH ${UHD_PKG_PATH}) - - SET_SOURCE_FILES_PROPERTIES( - ${CMAKE_CURRENT_SOURCE_DIR}/usrp2_iface.cpp - PROPERTIES COMPILE_DEFINITIONS - "UHD_LIB_DIR=\"lib${LIB_SUFFIX}\"" - ) - LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/clock_ctrl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/codec_ctrl.cpp @@ -45,5 +33,6 @@ IF(ENABLE_USRP2) ${CMAKE_CURRENT_SOURCE_DIR}/usrp2_iface.cpp ${CMAKE_CURRENT_SOURCE_DIR}/usrp2_impl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/usrp2_fifo_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/n200_image_loader.cpp ) ENDIF(ENABLE_USRP2) diff --git a/host/lib/usrp/usrp2/n200_image_loader.cpp b/host/lib/usrp/usrp2/n200_image_loader.cpp new file mode 100644 index 000000000..ce956c22c --- /dev/null +++ b/host/lib/usrp/usrp2/n200_image_loader.cpp @@ -0,0 +1,616 @@ +// +// Copyright 2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <cstring> +#include <iostream> +#include <fstream> + +#include <boost/asio/ip/address_v4.hpp> +#include <boost/assign.hpp> +#include <boost/filesystem.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <boost/algorithm/string/erase.hpp> + +#include <uhd/config.hpp> +#include <uhd/image_loader.hpp> +#include <uhd/exception.hpp> +#include <uhd/transport/if_addrs.hpp> +#include <uhd/transport/udp_simple.hpp> +#include <uhd/utils/byteswap.hpp> +#include <uhd/utils/paths.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/types/dict.hpp> + +#include "fw_common.h" +#include "usrp2_iface.hpp" +#include "usrp2_impl.hpp" + +typedef boost::asio::ip::address_v4 ip_v4; + +namespace fs = boost::filesystem; +using namespace boost::algorithm; + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; + +/* + * Constants + */ + +#define N200_FLASH_DATA_PACKET_SIZE 256 +#define N200_UDP_FW_UPDATE_PORT 49154 +#define UDP_TIMEOUT 0.5 + +#define N200_FW_MAX_SIZE_BYTES 31744 +#define N200_PROD_FW_IMAGE_ADDR 0x00300000 +#define N200_SAFE_FW_IMAGE_ADDR 0x003F0000 + +#define N200_FPGA_MAX_SIZE_BYTES 1572864 +#define N200_PROD_FPGA_IMAGE_ADDR 0x00180000 +#define N200_SAFE_FPGA_IMAGE_ADDR 0x00000000 + +/* + * Packet codes + */ +typedef enum { + UNKNOWN = ' ', + + N200_QUERY = 'a', + N200_ACK = 'A', + + GET_FLASH_INFO_CMD = 'f', + GET_FLASH_INFO_ACK = 'F', + + ERASE_FLASH_CMD = 'e', + ERASE_FLASH_ACK = 'E', + + CHECK_ERASING_DONE_CMD = 'd', + DONE_ERASING_ACK = 'D', + NOT_DONE_ERASING_ACK = 'B', + + WRITE_FLASH_CMD = 'w', + WRITE_FLASH_ACK = 'W', + + READ_FLASH_CMD = 'r', + READ_FLASH_ACK = 'R', + + RESET_CMD = 's', + RESET_ACK = 'S', + + GET_HW_REV_CMD = 'v', + GET_HW_REV_ACK = 'V', +} n200_fw_update_id_t; + +/* + * Mapping revision numbers to names + */ +static const uhd::dict<boost::uint32_t, std::string> n200_filename_map = boost::assign::map_list_of + (0, "n2xx") // Is an N-Series, but the EEPROM value is invalid + (0xa, "n200_r3") + (0x100a, "n200_r4") + (0x10a, "n210_r3") + (0x110a, "n210_r4") +; + +/* + * Packet structure + */ +typedef struct { + boost::uint32_t proto_ver; + boost::uint32_t id; + boost::uint32_t seq; + union { + boost::uint32_t ip_addr; + boost::uint32_t hw_rev; + struct { + boost::uint32_t flash_addr; + boost::uint32_t length; + boost::uint8_t data[256]; + } flash_args; + struct { + boost::uint32_t sector_size_bytes; + boost::uint32_t memory_size_bytes; + } flash_info_args; + } data; +} n200_fw_update_data_t; + +/* + * N-Series burn session + */ +typedef struct { + bool fw; + bool overwrite_safe; + bool reset; + uhd::device_addr_t dev_addr; + std::string burn_type; + std::string filepath; + boost::uint8_t data_in[udp_simple::mtu]; + boost::uint32_t size; + boost::uint32_t max_size; + boost::uint32_t flash_addr; + udp_simple::sptr xport; +} n200_session_t; + +/*********************************************************************** + * uhd::image_loader functionality + **********************************************************************/ + +static void print_usrp2_error(const image_loader::image_loader_args_t &image_loader_args){ + #ifdef UHD_PLATFORM_WIN32 + std::string usrp2_card_burner_gui = "\""; + const std::string nl = " ^\n "; + #else + std::string usrp2_card_burner_gui = "sudo \""; + const std::string nl = " \\\n "; + #endif + + usrp2_card_burner_gui += find_utility("usrp2_card_burner_gui.py"); + usrp2_card_burner_gui += "\""; + + if(image_loader_args.load_firmware){ + usrp2_card_burner_gui += str(boost::format("%s--fw=\"%s\"") + % nl + % ((image_loader_args.firmware_path == "") + ? find_image_path("usrp2_fw.bin") + : image_loader_args.firmware_path)); + } + if(image_loader_args.load_fpga){ + usrp2_card_burner_gui += str(boost::format("%s--fpga=\"%s\"") + % nl + % ((image_loader_args.fpga_path == "") + ? find_image_path("usrp2_fpga.bin") + : image_loader_args.fpga_path)); + } + + throw uhd::runtime_error(str(boost::format("The specified device is a USRP2, which is not supported by this utility.\n" + "Instead, plug the device's SD card into your machine and run this command:\n\n" + "%s" + ) % usrp2_card_burner_gui)); +} + +/* + * Ethernet communication functions + */ +static UHD_INLINE size_t n200_send_and_recv(udp_simple::sptr xport, + n200_fw_update_id_t pkt_code, + n200_fw_update_data_t *pkt_out, + boost::uint8_t* data){ + pkt_out->proto_ver = htonx<boost::uint32_t>(USRP2_FW_COMPAT_NUM); + pkt_out->id = htonx<boost::uint32_t>(pkt_code); + xport->send(boost::asio::buffer(pkt_out, sizeof(*pkt_out))); + return xport->recv(boost::asio::buffer(data, udp_simple::mtu), UDP_TIMEOUT); +} + +static UHD_INLINE bool n200_response_matches(const n200_fw_update_data_t *pkt_in, + n200_fw_update_id_t pkt_code, + size_t len){ + return (len > offsetof(n200_fw_update_data_t, data) and + ntohl(pkt_in->id) == pkt_code); +} + +static uhd::device_addr_t n200_find(const image_loader::image_loader_args_t &image_loader_args){ + bool user_specified = image_loader_args.args.has_key("addr") or + image_loader_args.args.has_key("serial") or + image_loader_args.args.has_key("name"); + + uhd::device_addrs_t found = usrp2_find(image_loader_args.args); + if(found.size() > 0){ + uhd::device_addr_t ret = found[0]; + + /* + * Make sure the device found is an N-Series and not a USRP2. A USRP2 + * will not respond to this query. If the user supplied specific + * arguments that led to a USRP2, throw an error. + */ + udp_simple::sptr rev_xport = udp_simple::make_connected( + ret["addr"], + BOOST_STRINGIZE(N200_UDP_FW_UPDATE_PORT) + ); + + n200_fw_update_data_t pkt_out; + boost::uint8_t data_in[udp_simple::mtu]; + const n200_fw_update_data_t *pkt_in = reinterpret_cast<const n200_fw_update_data_t*>(data_in); + + size_t len = n200_send_and_recv(rev_xport, GET_HW_REV_CMD, &pkt_out, data_in); + if(n200_response_matches(pkt_in, GET_HW_REV_ACK, len)){ + boost::uint32_t rev = ntohl(pkt_in->data.hw_rev); + ret["hw_rev"] = n200_filename_map.get(rev, "n2xx"); + return ret; + } + else if(len > offsetof(n200_fw_update_data_t, data) and ntohl(pkt_in->id) != GET_HW_REV_ACK){ + throw uhd::runtime_error(str(boost::format("Received invalid reply %d from device.") + % ntohl(pkt_in->id))); + } + else if(user_specified){ + // At this point, we haven't received any response, so assume it's a USRP2 + print_usrp2_error(image_loader_args); + } + } + + return uhd::device_addr_t(); +} + +/* + * Validate and read firmware image + */ +static void n200_validate_firmware_image(n200_session_t &session){ + if(not fs::exists(session.filepath)){ + throw uhd::runtime_error(str(boost::format("Could not find image at path \"%s\".") + % session.filepath)); + } + + session.size = fs::file_size(session.filepath); + session.max_size = N200_FW_MAX_SIZE_BYTES; + + if(session.size > session.max_size){ + throw uhd::runtime_error(str(boost::format("The specified FPGA image is too large: %d vs. %d") + % session.size % session.max_size)); + } + + // File must have proper header + std::ifstream image_file(session.filepath.c_str(), std::ios::binary); + boost::uint8_t test_bytes[4]; + image_file.seekg(0, std::ios::beg); + image_file.read((char*)test_bytes,4); + image_file.close(); + for(int i = 0; i < 4; i++) if(test_bytes[i] != 11){ + throw uhd::runtime_error(str(boost::format("The file at path \"%s\" is not a valid firmware image.") + % session.filepath)); + } +} + +/* + * Validate and validate FPGA image + */ +static void n200_validate_fpga_image(n200_session_t &session){ + if(not fs::exists(session.filepath)){ + throw uhd::runtime_error(str(boost::format("Could not find image at path \"%s\".") + % session.filepath)); + } + + session.size = fs::file_size(session.filepath); + session.max_size = N200_FPGA_MAX_SIZE_BYTES; + + if(session.size > session.max_size){ + throw uhd::runtime_error(str(boost::format("The specified FPGA image is too large: %d vs. %d") + % session.size % session.max_size)); + } + + // File must have proper header + std::ifstream image_file(session.filepath.c_str(), std::ios::binary); + boost::uint8_t test_bytes[63]; + image_file.seekg(0, std::ios::beg); + image_file.read((char*)test_bytes, 63); + bool is_good = false; + for(int i = 0; i < 63; i++){ + if(test_bytes[i] == 255) continue; + else if(test_bytes[i] == 170 and + test_bytes[i+1] == 153){ + is_good = true; + break; + } + } + image_file.close(); + if(not is_good){ + throw uhd::runtime_error(str(boost::format("The file at path \"%s\" is not a valid FPGA image.") + % session.filepath)); + } +} + +/* + * Set up a session for burning an N-Series image. This session info + * will be passed into the erase, burn, and verify functions. + */ +static void n200_setup_session(n200_session_t &session, + const image_loader::image_loader_args_t &image_loader_args, + bool fw){ + + + session.fw = fw; + session.reset = image_loader_args.args.has_key("reset"); + + /* + * If no filepath is given, attempt to determine the default image by + * querying the device for its revision. If the device has a corrupt + * EEPROM or is otherwise unable to provide its revision, this is + * impossible, and the user must manually provide a firmware file. + */ + if((session.fw and image_loader_args.firmware_path == "") or + image_loader_args.fpga_path == ""){ + if(session.dev_addr["hw_rev"] == "n2xx"){ + throw uhd::runtime_error("This device's revision cannot be determined. " + "You must manually specify a filepath."); + } + else{ + session.filepath = session.fw ? find_image_path(str(boost::format("usrp_%s_fw.bin") + % erase_tail_copy(session.dev_addr["hw_rev"],3))) + : find_image_path(str(boost::format("usrp_%s_fpga.bin") + % session.dev_addr["hw_rev"])); + } + } + else{ + session.filepath = session.fw ? image_loader_args.firmware_path + : image_loader_args.fpga_path; + } + if(session.fw) n200_validate_firmware_image(session); + else n200_validate_fpga_image(session); + + session.overwrite_safe = image_loader_args.args.has_key("overwrite-safe"); + if(session.overwrite_safe){ + session.flash_addr = session.fw ? N200_SAFE_FW_IMAGE_ADDR + : N200_SAFE_FPGA_IMAGE_ADDR; + session.burn_type = session.fw ? "firmware safe" + : "FPGA safe"; + } + else{ + session.flash_addr = session.fw ? N200_PROD_FW_IMAGE_ADDR + : N200_PROD_FPGA_IMAGE_ADDR; + session.burn_type = session.fw ? "firmware" + : "FPGA"; + } + + session.xport = udp_simple::make_connected(session.dev_addr["addr"], + BOOST_STRINGIZE(N200_UDP_FW_UPDATE_PORT)); +} + +static void n200_erase_image(n200_session_t &session){ + + // UDP receive buffer + n200_fw_update_data_t pkt_out; + const n200_fw_update_data_t *pkt_in = reinterpret_cast<const n200_fw_update_data_t*>(session.data_in); + + // Setting up UDP packet + pkt_out.data.flash_args.flash_addr = htonx<boost::uint32_t>(session.flash_addr); + pkt_out.data.flash_args.length = htonx<boost::uint32_t>(session.size); + + // Begin erasing + size_t len = n200_send_and_recv(session.xport, ERASE_FLASH_CMD, &pkt_out, session.data_in); + if(n200_response_matches(pkt_in, ERASE_FLASH_ACK, len)){ + std::cout << boost::format("-- Erasing %s image...") % session.burn_type << std::flush; + } + else if(len < offsetof(n200_fw_update_data_t, data)){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Timed out waiting for reply from device."); + } + else if(ntohl(pkt_in->id) != ERASE_FLASH_ACK){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error(str(boost::format("Received invalid reply %d from device.\n") + % ntohl(pkt_in->id))); + } + else{ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Did not receive response from device."); + } + + // Check for erase completion + while(true){ + len = n200_send_and_recv(session.xport, CHECK_ERASING_DONE_CMD, &pkt_out, session.data_in); + if(n200_response_matches(pkt_in, DONE_ERASING_ACK, len)){ + std::cout << "successful." << std::endl; + break; + } + else if(len < offsetof(n200_fw_update_data_t, data)){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Timed out waiting for reply from device."); + } + else if(ntohl(pkt_in->id) != NOT_DONE_ERASING_ACK){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error(str(boost::format("Received invalid reply %d from device.\n") + % ntohl(pkt_in->id))); + } + } +} + +static void n200_write_image(n200_session_t &session){ + + // UDP receive buffer + n200_fw_update_data_t pkt_out; + const n200_fw_update_data_t *pkt_in = reinterpret_cast<const n200_fw_update_data_t*>(session.data_in); + size_t len = 0; + + // Write image + std::ifstream image(session.filepath.c_str(), std::ios::binary); + boost::uint32_t current_addr = session.flash_addr; + pkt_out.data.flash_args.length = htonx<boost::uint32_t>(N200_FLASH_DATA_PACKET_SIZE); + for(size_t i = 0; i < ((session.size/N200_FLASH_DATA_PACKET_SIZE)+1); i++){ + pkt_out.data.flash_args.flash_addr = htonx<boost::uint32_t>(current_addr); + memset(pkt_out.data.flash_args.data, 0x0, N200_FLASH_DATA_PACKET_SIZE); + image.read((char*)pkt_out.data.flash_args.data, N200_FLASH_DATA_PACKET_SIZE); + + len = n200_send_and_recv(session.xport, WRITE_FLASH_CMD, &pkt_out, session.data_in); + if(n200_response_matches(pkt_in, WRITE_FLASH_ACK, len)){ + std::cout << boost::format("\r-- Writing %s image (%d%%)") + % session.burn_type + % int((double(current_addr-session.flash_addr)/double(session.size))*100) + << std::flush; + } + else if(len < offsetof(n200_fw_update_data_t, data)){ + image.close(); + std::cout << boost::format("\r--Writing %s image..failed at %d%%.") + % session.burn_type + % int((double(current_addr-session.flash_addr)/double(session.size))*100) + << std::endl; + throw uhd::runtime_error("Timed out waiting for reply from device."); + } + else if(ntohl(pkt_in->id) != WRITE_FLASH_ACK){ + image.close(); + std::cout << boost::format("\r--Writing %s image..failed at %d%%.") + % session.burn_type + % int((double(current_addr-session.flash_addr)/double(session.size))*100) + << std::endl; + throw uhd::runtime_error(str(boost::format("Received invalid reply %d from device.\n") + % ntohl(pkt_in->id))); + } + + current_addr += N200_FLASH_DATA_PACKET_SIZE; + } + std::cout << boost::format("\r-- Writing %s image...successful.") + % session.burn_type + << std::endl; + + image.close(); +} + +static void n200_verify_image(n200_session_t &session){ + + // UDP receive buffer + n200_fw_update_data_t pkt_out; + const n200_fw_update_data_t *pkt_in = reinterpret_cast<const n200_fw_update_data_t*>(session.data_in); + size_t len = 0; + + // Read and verify image + std::ifstream image(session.filepath.c_str(), std::ios::binary); + boost::uint8_t image_part[N200_FLASH_DATA_PACKET_SIZE]; + boost::uint32_t current_addr = session.flash_addr; + pkt_out.data.flash_args.length = htonx<boost::uint32_t>(N200_FLASH_DATA_PACKET_SIZE); + boost::uint16_t cmp_len = 0; + for(size_t i = 0; i < ((session.size/N200_FLASH_DATA_PACKET_SIZE)+1); i++){ + memset(image_part, 0x0, N200_FLASH_DATA_PACKET_SIZE); + memset((void*)pkt_in->data.flash_args.data, 0x0, N200_FLASH_DATA_PACKET_SIZE); + + pkt_out.data.flash_args.flash_addr = htonx<boost::uint32_t>(current_addr); + image.read((char*)image_part, N200_FLASH_DATA_PACKET_SIZE); + cmp_len = image.gcount(); + + len = n200_send_and_recv(session.xport, READ_FLASH_CMD, &pkt_out, session.data_in); + if(n200_response_matches(pkt_in, READ_FLASH_ACK, len)){ + std::cout << boost::format("\r-- Verifying %s image (%d%%)") + % session.burn_type + % int((double(current_addr-session.flash_addr)/double(session.size))*100) + << std::flush; + + if(memcmp(image_part, pkt_in->data.flash_args.data, cmp_len)){ + std::cout << boost::format("\r-- Verifying %s image...failed at %d%%.") + % session.burn_type + % int((double(current_addr-session.flash_addr)/double(session.size))*100) + << std::endl; + throw uhd::runtime_error(str(boost::format("Failed to verify %s image.") + % session.burn_type)); + } + } + else if(len < offsetof(n200_fw_update_data_t, data)){ + image.close(); + std::cout << boost::format("\r-- Verifying %s image...failed at %d%%.") + % session.burn_type + % int((double(current_addr-session.flash_addr)/double(session.size))*100) + << std::endl; + throw uhd::runtime_error("Timed out waiting for reply from device."); + } + else if(ntohl(pkt_in->id) != READ_FLASH_ACK){ + image.close(); + std::cout << boost::format("\r-- Verifying %s image...failed at %d%%.") + % session.burn_type + % int((double(current_addr-session.flash_addr)/double(session.size))*100) + << std::endl; + throw uhd::runtime_error(str(boost::format("Received invalid reply %d from device.\n") + % ntohl(pkt_in->id))); + } + + current_addr += N200_FLASH_DATA_PACKET_SIZE; + } + std::cout << boost::format("\r-- Verifying %s image...successful.") % session.burn_type + << std::endl; + + image.close(); +} + +static void n200_reset(n200_session_t &session){ + + // UDP receive buffer + n200_fw_update_data_t pkt_out; + + // There should be no response + std::cout << "-- Resetting device..." << std::flush; + size_t len = n200_send_and_recv(session.xport, RESET_CMD, &pkt_out, session.data_in); + if(len > 0){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Failed to reset N200."); + } + std::cout << "successful." << std::endl; +} + +// n210_r4 -> N210 r4 +static std::string nice_name(const std::string &fw_rev){ + std::string ret = fw_rev; + ret[0] = ::toupper(ret[0]); + + size_t pos = 0; + if((pos = fw_rev.find("_")) != std::string::npos){ + ret[pos] = ' '; + } + + return ret; +} + +static bool n200_image_loader(const image_loader::image_loader_args_t &image_loader_args){ + // See if any N2x0 with the given args is found + // This will throw if specific args lead to a USRP2 + n200_session_t session; + session.dev_addr = n200_find(image_loader_args); + if(session.dev_addr.size() == 0 or (!image_loader_args.load_firmware and !image_loader_args.load_fpga)){ + return false; + } + + std::cout << boost::format("Unit: USRP %s (%s, %s)") + % nice_name(session.dev_addr.get("hw_rev")) + % session.dev_addr.get("serial") + % session.dev_addr.get("addr") + << std::endl; + + if(image_loader_args.load_firmware){ + n200_setup_session(session, + image_loader_args, + true + ); + + std::cout << "Firmware image: " << session.filepath << std::endl; + + n200_erase_image(session); + n200_write_image(session); + n200_verify_image(session); + if(session.reset and !image_loader_args.load_fpga){ + n200_reset(session); + } + } + if(image_loader_args.load_fpga){ + n200_setup_session(session, + image_loader_args, + false + ); + + std::cout << "FPGA image: " << session.filepath << std::endl; + + n200_erase_image(session); + n200_write_image(session); + n200_verify_image(session); + if(session.reset){ + n200_reset(session); + } + } + + return true; +} + +UHD_STATIC_BLOCK(register_n200_image_loader){ + std::string recovery_instructions = "Aborting. Your USRP-N Series unit will likely be unusable.\n" + "Refer to http://files.ettus.com/manual/page_usrp2.html#usrp2_loadflash_brick\n" + "for details on restoring your device."; + + image_loader::register_image_loader("usrp2", n200_image_loader, recovery_instructions); +} diff --git a/host/lib/usrp/usrp2/usrp2_iface.cpp b/host/lib/usrp/usrp2/usrp2_iface.cpp index 1d41173f8..2b382ae38 100644 --- a/host/lib/usrp/usrp2/usrp2_iface.cpp +++ b/host/lib/usrp/usrp2/usrp2_iface.cpp @@ -387,15 +387,15 @@ public: //create the burner commands if (this->get_rev() == USRP2_REV3 or this->get_rev() == USRP2_REV4){ - const std::string card_burner = (fs::path(uhd::get_pkg_path()) / UHD_LIB_DIR / "uhd" / "utils" / "usrp2_card_burner_gui.py").string(); - const std::string card_burner_cmd = str(boost::format("\"%s%s\" %s--fpga=\"%s\" %s--fw=\"%s\"") % sudo % card_burner % ml % fpga_image_path % ml % fw_image_path); + const std::string card_burner = uhd::find_utility("usrp2_card_burner_gui.py"); + const std::string card_burner_cmd = str(boost::format(" %s\"%s\" %s--fpga=\"%s\" %s--fw=\"%s\"") % sudo % card_burner % ml % fpga_image_path % ml % fw_image_path); return str(boost::format("%s\n%s") % print_utility_error("uhd_images_downloader.py") % card_burner_cmd); } else{ const std::string addr = _ctrl_transport->get_recv_addr(); - const std::string net_burner_path = (fs::path(uhd::get_pkg_path()) / UHD_LIB_DIR / "uhd" / "utils" / "usrp_n2xx_simple_net_burner").string(); - const std::string net_burner_cmd = str(boost::format("\"%s\" %s--addr=\"%s\"") % net_burner_path % ml % addr); - return str(boost::format("%s\n%s") % print_utility_error("uhd_images_downloader.py") % net_burner_cmd); + const std::string image_loader_path = (fs::path(uhd::get_pkg_path()) / "bin" / "uhd_image_loader").string(); + const std::string image_loader_cmd = str(boost::format(" \"%s\" %s--args=\"type=usrp2,addr=%s\"") % image_loader_path % ml % addr); + return str(boost::format("%s\n%s") % print_utility_error("uhd_images_downloader.py") % image_loader_cmd); } } diff --git a/host/lib/usrp/usrp2/usrp2_impl.cpp b/host/lib/usrp/usrp2/usrp2_impl.cpp index 1acc1dad3..6073ec1c0 100644 --- a/host/lib/usrp/usrp2/usrp2_impl.cpp +++ b/host/lib/usrp/usrp2/usrp2_impl.cpp @@ -48,7 +48,7 @@ static const size_t DEFAULT_NUM_FRAMES = 32; /*********************************************************************** * Discovery over the udp transport **********************************************************************/ -static device_addrs_t usrp2_find(const device_addr_t &hint_){ +device_addrs_t usrp2_find(const device_addr_t &hint_){ //handle the multi-device discovery device_addrs_t hints = separate_device_addr(hint_); if (hints.size() > 1){ diff --git a/host/lib/usrp/usrp2/usrp2_impl.hpp b/host/lib/usrp/usrp2/usrp2_impl.hpp index 701403029..07cd98b4c 100644 --- a/host/lib/usrp/usrp2/usrp2_impl.hpp +++ b/host/lib/usrp/usrp2/usrp2_impl.hpp @@ -42,6 +42,7 @@ #include <uhd/transport/vrt_if_packet.hpp> #include <uhd/transport/udp_simple.hpp> #include <uhd/transport/udp_zero_copy.hpp> +#include <uhd/types/device_addr.hpp> #include <uhd/usrp/dboard_manager.hpp> #include <uhd/usrp/subdev_spec.hpp> #include <boost/weak_ptr.hpp> @@ -55,6 +56,8 @@ static const boost::uint32_t USRP2_TX_ASYNC_SID = 2; static const boost::uint32_t USRP2_RX_SID_BASE = 3; static const std::string USRP2_EEPROM_MAP_KEY = "N100"; +uhd::device_addrs_t usrp2_find(const uhd::device_addr_t &hint_); + //! Make a usrp2 dboard interface. uhd::usrp::dboard_iface::sptr make_usrp2_dboard_iface( uhd::timed_wb_iface::sptr wb_iface, diff --git a/host/lib/usrp/x300/CMakeLists.txt b/host/lib/usrp/x300/CMakeLists.txt index a588f901b..9a8601452 100644 --- a/host/lib/usrp/x300/CMakeLists.txt +++ b/host/lib/usrp/x300/CMakeLists.txt @@ -1,5 +1,5 @@ # -# Copyright 2013 Ettus Research LLC +# Copyright 2013,2015 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -34,5 +34,8 @@ IF(ENABLE_X300) ${CMAKE_CURRENT_SOURCE_DIR}/x300_io_impl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/x300_dboard_iface.cpp ${CMAKE_CURRENT_SOURCE_DIR}/x300_clock_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/x300_image_loader.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/x300_adc_dac_utils.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/cdecode.c ) ENDIF(ENABLE_X300) diff --git a/host/lib/usrp/x300/cdecode.c b/host/lib/usrp/x300/cdecode.c new file mode 100644 index 000000000..1d09cbe22 --- /dev/null +++ b/host/lib/usrp/x300/cdecode.c @@ -0,0 +1,80 @@ +/* +cdecoder.c - c source to a base64 decoding algorithm implementation + +This is part of the libb64 project, and has been placed in the public domain. +For details, see http://sourceforge.net/projects/libb64 +*/ + +#include "cdecode.h" + +int base64_decode_value(char value_in){ + static const char decoding[] = {62,-1,-1,-1,63,52,53,54,55,56,57,58,59,60,61,-1,-1,-1,-2,-1,-1,-1,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,-1,-1,-1,-1,-1,-1,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51}; + static const char decoding_size = sizeof(decoding); + value_in -= 43; + if ((signed char)value_in < 0 || value_in > decoding_size) return -1; + return decoding[(int)value_in]; +} + +void base64_init_decodestate(base64_decodestate* state_in){ + state_in->step = step_a; + state_in->plainchar = 0; +} + +size_t base64_decode_block(const char* code_in, const size_t length_in, char* plaintext_out, base64_decodestate* state_in){ + const char* codechar = code_in; + char* plainchar = plaintext_out; + char fragment; + + *plainchar = state_in->plainchar; + + switch (state_in->step){ + while (1){ + case step_a: + do{ + if (codechar == code_in+length_in){ + state_in->step = step_a; + state_in->plainchar = *plainchar; + return plainchar - plaintext_out; + } + fragment = (char)base64_decode_value(*codechar++); + } while ((signed char)fragment < 0); + *plainchar = (fragment & 0x03f) << 2; + + case step_b: + do{ + if (codechar == code_in+length_in){ + state_in->step = step_b; + state_in->plainchar = *plainchar; + return plainchar - plaintext_out; + } + fragment = (char)base64_decode_value(*codechar++); + } while ((signed char)fragment < 0); + *plainchar++ |= (fragment & 0x030) >> 4; + *plainchar = (fragment & 0x00f) << 4; + case step_c: + do{ + if (codechar == code_in+length_in) + { + state_in->step = step_c; + state_in->plainchar = *plainchar; + return plainchar - plaintext_out; + } + fragment = (char)base64_decode_value(*codechar++); + } while ((signed char)fragment < 0); + *plainchar++ |= (fragment & 0x03c) >> 2; + *plainchar = (fragment & 0x003) << 6; + case step_d: + do{ + if (codechar == code_in+length_in){ + state_in->step = step_d; + state_in->plainchar = *plainchar; + return plainchar - plaintext_out; + } + fragment = (char)base64_decode_value(*codechar++); + } while ((signed char)fragment < 0); + *plainchar++ |= (fragment & 0x03f); + } + } + /* control should not reach here */ + return plainchar - plaintext_out; +} diff --git a/host/lib/usrp/x300/cdecode.h b/host/lib/usrp/x300/cdecode.h new file mode 100644 index 000000000..b8da55aa1 --- /dev/null +++ b/host/lib/usrp/x300/cdecode.h @@ -0,0 +1,36 @@ +/* +cdecode.h - c header for a base64 decoding algorithm + +This is part of the libb64 project, and has been placed in the public domain. +For details, see http://sourceforge.net/projects/libb64 +*/ + +#ifndef BASE64_CDECODE_H +#define BASE64_CDECODE_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include <stddef.h> + +typedef enum{ + step_a, step_b, step_c, step_d +} base64_decodestep; + +typedef struct{ + base64_decodestep step; + char plainchar; +} base64_decodestate; + +void base64_init_decodestate(base64_decodestate* state_in); + +int base64_decode_value(char value_in); + +size_t base64_decode_block(const char* code_in, const size_t length_in, char* plaintext_out, base64_decodestate* state_in); + +#ifdef __cplusplus +} +#endif + +#endif /* BASE64_CDECODE_H */ diff --git a/host/lib/usrp/x300/x300_adc_ctrl.cpp b/host/lib/usrp/x300/x300_adc_ctrl.cpp index b0e4e4b95..ce6102b35 100644 --- a/host/lib/usrp/x300/x300_adc_ctrl.cpp +++ b/host/lib/usrp/x300/x300_adc_ctrl.cpp @@ -55,8 +55,8 @@ public: _ads62p48_regs.lvds_cmos = ads62p48_regs_t::LVDS_CMOS_DDR_LVDS; _ads62p48_regs.channel_control = ads62p48_regs_t::CHANNEL_CONTROL_INDEPENDENT; _ads62p48_regs.data_format = ads62p48_regs_t::DATA_FORMAT_2S_COMPLIMENT; - _ads62p48_regs.clk_out_pos_edge = ads62p48_regs_t::CLK_OUT_POS_EDGE_MINUS7_26; - _ads62p48_regs.clk_out_neg_edge = ads62p48_regs_t::CLK_OUT_NEG_EDGE_MINUS7_26; + _ads62p48_regs.clk_out_pos_edge = ads62p48_regs_t::CLK_OUT_POS_EDGE_MINUS4_26; + _ads62p48_regs.clk_out_neg_edge = ads62p48_regs_t::CLK_OUT_NEG_EDGE_MINUS4_26; this->send_ads62p48_reg(0); diff --git a/host/lib/usrp/x300/x300_adc_dac_utils.cpp b/host/lib/usrp/x300/x300_adc_dac_utils.cpp new file mode 100644 index 000000000..2dadea26e --- /dev/null +++ b/host/lib/usrp/x300/x300_adc_dac_utils.cpp @@ -0,0 +1,412 @@ +// +// Copyright 2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "x300_impl.hpp" +#include <boost/date_time/posix_time/posix_time_io.hpp> + +/*********************************************************************** + * DAC: Reset and synchronization operations + **********************************************************************/ + +void x300_impl::synchronize_dacs(const std::vector<radio_perifs_t*>& radios) +{ + if (radios.size() < 2) return; //Nothing to synchronize + + //**PRECONDITION** + //This function assumes that all the VITA times in "radios" are synchronized + //to a common reference. Currently, this function is called in get_tx_stream + //which also has the same precondition. + + //Reinitialize and resync all DACs + for (size_t i = 0; i < radios.size(); i++) { + radios[i]->dac->reset_and_resync(); + } + + //Get a rough estimate of the cumulative command latency + boost::posix_time::ptime t_start = boost::posix_time::microsec_clock::local_time(); + for (size_t i = 0; i < radios.size(); i++) { + radios[i]->ctrl->peek64(RB64_TIME_NOW); //Discard value. We are just timing the call + } + boost::posix_time::time_duration t_elapsed = + boost::posix_time::microsec_clock::local_time() - t_start; + + //Add 100% of headroom + uncertaintly to the command time + boost::uint64_t t_sync_us = (t_elapsed.total_microseconds() * 2) + 13000 /*Scheduler latency*/; + + //Pick radios[0] as the time reference. + uhd::time_spec_t sync_time = + radios[0]->time64->get_time_now() + uhd::time_spec_t(((double)t_sync_us)/1e6); + + //Send the sync command + for (size_t i = 0; i < radios.size(); i++) { + radios[i]->ctrl->set_time(sync_time); + radios[i]->ctrl->poke32(TOREG(SR_DACSYNC), 0x1); //Arm FRAMEP/N sync pulse + radios[i]->ctrl->set_time(uhd::time_spec_t(0.0)); //Clear command time + } + + //Wait and check status + boost::this_thread::sleep(boost::posix_time::microseconds(t_sync_us)); + for (size_t i = 0; i < radios.size(); i++) { + radios[i]->dac->verify_sync(); + } +} + +/*********************************************************************** + * ADC: Self-test operations + **********************************************************************/ + +static void check_adc(uhd::wb_iface::sptr iface, const boost::uint32_t val, const boost::uint32_t i) +{ + boost::uint32_t adc_rb = iface->peek32(RB32_RX); + adc_rb ^= 0xfffc0000; //adapt for I inversion in FPGA + if (val != adc_rb) { + throw uhd::runtime_error( + (boost::format("ADC self-test failed for Radio%d. (Exp=0x%x, Got=0x%x)")%i%val%adc_rb).str()); + } +} + +void x300_impl::self_test_adcs(mboard_members_t& mb, boost::uint32_t ramp_time_ms) { + for (size_t r = 0; r < mboard_members_t::NUM_RADIOS; r++) { + radio_perifs_t &perif = mb.radio_perifs[r]; + + //First test basic patterns + perif.adc->set_test_word("ones", "ones"); check_adc(perif.ctrl, 0xfffcfffc,r); + perif.adc->set_test_word("zeros", "zeros"); check_adc(perif.ctrl, 0x00000000,r); + perif.adc->set_test_word("ones", "zeros"); check_adc(perif.ctrl, 0xfffc0000,r); + perif.adc->set_test_word("zeros", "ones"); check_adc(perif.ctrl, 0x0000fffc,r); + for (size_t k = 0; k < 14; k++) + { + perif.adc->set_test_word("zeros", "custom", 1 << k); + check_adc(perif.ctrl, 1 << (k+2),r); + } + for (size_t k = 0; k < 14; k++) + { + perif.adc->set_test_word("custom", "zeros", 1 << k); + check_adc(perif.ctrl, 1 << (k+18),r); + } + + //Turn on ramp pattern test + perif.adc->set_test_word("ramp", "ramp"); + perif.misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 0); + perif.misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 1); + } + boost::this_thread::sleep(boost::posix_time::milliseconds(ramp_time_ms)); + + bool passed = true; + std::string status_str; + for (size_t r = 0; r < mboard_members_t::NUM_RADIOS; r++) { + radio_perifs_t &perif = mb.radio_perifs[r]; + perif.misc_ins->refresh(); + + std::string i_status, q_status; + if (perif.misc_ins->get(radio_misc_ins_reg::ADC_CHECKER1_I_LOCKED)) + if (perif.misc_ins->get(radio_misc_ins_reg::ADC_CHECKER1_I_ERROR)) + i_status = "Bit Errors!"; + else + i_status = "Good"; + else + i_status = "Not Locked!"; + + if (perif.misc_ins->get(radio_misc_ins_reg::ADC_CHECKER1_Q_LOCKED)) + if (perif.misc_ins->get(radio_misc_ins_reg::ADC_CHECKER1_Q_ERROR)) + q_status = "Bit Errors!"; + else + q_status = "Good"; + else + q_status = "Not Locked!"; + + passed = passed && (i_status == "Good") && (q_status == "Good"); + status_str += (boost::format(", ADC%d_I=%s, ADC%d_Q=%s")%r%i_status%r%q_status).str(); + + //Return to normal mode + perif.adc->set_test_word("normal", "normal"); + } + + if (not passed) { + throw uhd::runtime_error( + (boost::format("ADC self-test failed! Ramp checker status: {%s}")%status_str.substr(2)).str()); + } +} + +void x300_impl::extended_adc_test(mboard_members_t& mb, double duration_s) +{ + static const size_t SECS_PER_ITER = 5; + UHD_MSG(status) << boost::format("Running Extended ADC Self-Test (Duration=%.0fs, %ds/iteration)...\n") + % duration_s % SECS_PER_ITER; + + size_t num_iters = static_cast<size_t>(ceil(duration_s/SECS_PER_ITER)); + size_t num_failures = 0; + for (size_t iter = 0; iter < num_iters; iter++) { + //Print date and time + boost::posix_time::time_facet *facet = new boost::posix_time::time_facet("%d-%b-%Y %H:%M:%S"); + std::ostringstream time_strm; + time_strm.imbue(std::locale(std::locale::classic(), facet)); + time_strm << boost::posix_time::second_clock::local_time(); + //Run self-test + UHD_MSG(status) << boost::format("-- [%s] Iteration %06d... ") % time_strm.str() % (iter+1); + try { + self_test_adcs(mb, SECS_PER_ITER*1000); + UHD_MSG(status) << "passed" << std::endl; + } catch(std::exception &e) { + num_failures++; + UHD_MSG(status) << e.what() << std::endl; + } + + } + if (num_failures == 0) { + UHD_MSG(status) << "Extended ADC Self-Test PASSED\n"; + } else { + throw uhd::runtime_error( + (boost::format("Extended ADC Self-Test FAILED!!! (%d/%d failures)\n") % num_failures % num_iters).str()); + } +} + +/*********************************************************************** + * ADC: Self-calibration operations + **********************************************************************/ + +void x300_impl::self_cal_adc_capture_delay(mboard_members_t& mb, const size_t radio_i, bool print_status) +{ + radio_perifs_t& perif = mb.radio_perifs[radio_i]; + if (print_status) UHD_MSG(status) << "Running ADC capture delay self-cal..." << std::flush; + + static const boost::uint32_t NUM_DELAY_STEPS = 32; //The IDELAYE2 element has 32 steps + static const boost::uint32_t NUM_RETRIES = 2; //Retry self-cal if it fails in warmup situations + static const boost::int32_t MIN_WINDOW_LEN = 4; + + boost::int32_t win_start = -1, win_stop = -1; + boost::uint32_t iter = 0; + while (iter++ < NUM_RETRIES) { + for (boost::uint32_t dly_tap = 0; dly_tap < NUM_DELAY_STEPS; dly_tap++) { + //Apply delay + perif.misc_outs->write(radio_misc_outs_reg::ADC_DATA_DLY_VAL, dly_tap); + perif.misc_outs->write(radio_misc_outs_reg::ADC_DATA_DLY_STB, 1); + perif.misc_outs->write(radio_misc_outs_reg::ADC_DATA_DLY_STB, 0); + + boost::uint32_t err_code = 0; + + // -- Test I Channel -- + //Put ADC in ramp test mode. Tie the other channel to all ones. + perif.adc->set_test_word("ramp", "ones"); + //Turn on the pattern checker in the FPGA. It will lock when it sees a zero + //and count deviations from the expected value + perif.misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 0); + perif.misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 1); + //10ms @ 200MHz = 2 million samples + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); + if (perif.misc_ins->read(radio_misc_ins_reg::ADC_CHECKER0_I_LOCKED)) { + err_code += perif.misc_ins->get(radio_misc_ins_reg::ADC_CHECKER0_I_ERROR); + } else { + err_code += 100; //Increment error code by 100 to indicate no lock + } + + // -- Test Q Channel -- + //Put ADC in ramp test mode. Tie the other channel to all ones. + perif.adc->set_test_word("ones", "ramp"); + //Turn on the pattern checker in the FPGA. It will lock when it sees a zero + //and count deviations from the expected value + perif.misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 0); + perif.misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 1); + //10ms @ 200MHz = 2 million samples + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); + if (perif.misc_ins->read(radio_misc_ins_reg::ADC_CHECKER0_Q_LOCKED)) { + err_code += perif.misc_ins->get(radio_misc_ins_reg::ADC_CHECKER0_Q_ERROR); + } else { + err_code += 100; //Increment error code by 100 to indicate no lock + } + + if (err_code == 0) { + if (win_start == -1) { //This is the first window + win_start = dly_tap; + win_stop = dly_tap; + } else { //We are extending the window + win_stop = dly_tap; + } + } else { + if (win_start != -1) { //A valid window turned invalid + if (win_stop - win_start >= MIN_WINDOW_LEN) { + break; //Valid window found + } else { + win_start = -1; //Reset window + } + } + } + //UHD_MSG(status) << (boost::format("CapTap=%d, Error=%d\n") % dly_tap % err_code); + } + + //Retry the self-cal if it fails + if ((win_start == -1 || (win_stop - win_start) < MIN_WINDOW_LEN) && iter < NUM_RETRIES /*not last iteration*/) { + win_start = -1; + win_stop = -1; + boost::this_thread::sleep(boost::posix_time::milliseconds(2000)); + } else { + break; + } + } + perif.adc->set_test_word("normal", "normal"); + perif.misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 0); + + if (win_start == -1) { + throw uhd::runtime_error("self_cal_adc_capture_delay: Self calibration failed. Convergence error."); + } + + if (win_stop-win_start < MIN_WINDOW_LEN) { + throw uhd::runtime_error("self_cal_adc_capture_delay: Self calibration failed. Valid window too narrow."); + } + + boost::uint32_t ideal_tap = (win_stop + win_start) / 2; + perif.misc_outs->write(radio_misc_outs_reg::ADC_DATA_DLY_VAL, ideal_tap); + perif.misc_outs->write(radio_misc_outs_reg::ADC_DATA_DLY_STB, 1); + perif.misc_outs->write(radio_misc_outs_reg::ADC_DATA_DLY_STB, 0); + + if (print_status) { + double tap_delay = (1.0e12 / mb.clock->get_master_clock_rate()) / (2*32); //in ps + UHD_MSG(status) << boost::format(" done (Tap=%d, Window=%d, TapDelay=%.3fps, Iter=%d)\n") % ideal_tap % (win_stop-win_start) % tap_delay % iter; + } +} + +double x300_impl::self_cal_adc_xfer_delay(mboard_members_t& mb, bool apply_delay) +{ + UHD_MSG(status) << "Running ADC transfer delay self-cal: " << std::flush; + + //Effective resolution of the self-cal. + static const size_t NUM_DELAY_STEPS = 100; + + double master_clk_period = (1.0e9 / mb.clock->get_master_clock_rate()); //in ns + double delay_start = 0.0; + double delay_range = 2 * master_clk_period; + double delay_incr = delay_range / NUM_DELAY_STEPS; + + UHD_MSG(status) << "Measuring..." << std::flush; + double cached_clk_delay = mb.clock->get_clock_delay(X300_CLOCK_WHICH_ADC0); + double fpga_clk_delay = mb.clock->get_clock_delay(X300_CLOCK_WHICH_FPGA); + + //Iterate through several values of delays and measure ADC data integrity + std::vector< std::pair<double,bool> > results; + for (size_t i = 0; i < NUM_DELAY_STEPS; i++) { + //Delay the ADC clock (will set both Ch0 and Ch1 delays) + double delay = mb.clock->set_clock_delay(X300_CLOCK_WHICH_ADC0, delay_incr*i + delay_start); + wait_for_clk_locked(mb.zpu_ctrl, ZPU_RB_CLK_STATUS_LMK_LOCK, 0.1); + + boost::uint32_t err_code = 0; + for (size_t r = 0; r < mboard_members_t::NUM_RADIOS; r++) { + //Test each channel (I and Q) individually so as to not accidentally trigger + //on the data from the other channel if there is a swap + + // -- Test I Channel -- + //Put ADC in ramp test mode. Tie the other channel to all ones. + mb.radio_perifs[r].adc->set_test_word("ramp", "ones"); + //Turn on the pattern checker in the FPGA. It will lock when it sees a zero + //and count deviations from the expected value + mb.radio_perifs[r].misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 0); + mb.radio_perifs[r].misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 1); + //50ms @ 200MHz = 10 million samples + boost::this_thread::sleep(boost::posix_time::milliseconds(50)); + if (mb.radio_perifs[r].misc_ins->read(radio_misc_ins_reg::ADC_CHECKER1_I_LOCKED)) { + err_code += mb.radio_perifs[r].misc_ins->get(radio_misc_ins_reg::ADC_CHECKER1_I_ERROR); + } else { + err_code += 100; //Increment error code by 100 to indicate no lock + } + + // -- Test Q Channel -- + //Put ADC in ramp test mode. Tie the other channel to all ones. + mb.radio_perifs[r].adc->set_test_word("ones", "ramp"); + //Turn on the pattern checker in the FPGA. It will lock when it sees a zero + //and count deviations from the expected value + mb.radio_perifs[r].misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 0); + mb.radio_perifs[r].misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 1); + //50ms @ 200MHz = 10 million samples + boost::this_thread::sleep(boost::posix_time::milliseconds(50)); + if (mb.radio_perifs[r].misc_ins->read(radio_misc_ins_reg::ADC_CHECKER1_Q_LOCKED)) { + err_code += mb.radio_perifs[r].misc_ins->get(radio_misc_ins_reg::ADC_CHECKER1_Q_ERROR); + } else { + err_code += 100; //Increment error code by 100 to indicate no lock + } + } + //UHD_MSG(status) << (boost::format("XferDelay=%fns, Error=%d\n") % delay % err_code); + results.push_back(std::pair<double,bool>(delay, err_code==0)); + } + + //Calculate the valid window + int win_start_idx = -1, win_stop_idx = -1, cur_start_idx = -1, cur_stop_idx = -1; + for (size_t i = 0; i < results.size(); i++) { + std::pair<double,bool>& item = results[i]; + if (item.second) { //If data is stable + if (cur_start_idx == -1) { //This is the first window + cur_start_idx = i; + cur_stop_idx = i; + } else { //We are extending the window + cur_stop_idx = i; + } + } else { + if (cur_start_idx == -1) { //We haven't yet seen valid data + //Do nothing + } else if (win_start_idx == -1) { //We passed the first valid window + win_start_idx = cur_start_idx; + win_stop_idx = cur_stop_idx; + } else { //Update cached window if current window is larger + double cur_win_len = results[cur_stop_idx].first - results[cur_start_idx].first; + double cached_win_len = results[win_stop_idx].first - results[win_start_idx].first; + if (cur_win_len > cached_win_len) { + win_start_idx = cur_start_idx; + win_stop_idx = cur_stop_idx; + } + } + //Reset current window + cur_start_idx = -1; + cur_stop_idx = -1; + } + } + if (win_start_idx == -1) { + throw uhd::runtime_error("self_cal_adc_xfer_delay: Self calibration failed. Convergence error."); + } + + double win_center = (results[win_stop_idx].first + results[win_start_idx].first) / 2.0; + double win_length = results[win_stop_idx].first - results[win_start_idx].first; + if (win_length < master_clk_period/4) { + throw uhd::runtime_error("self_cal_adc_xfer_delay: Self calibration failed. Valid window too narrow."); + } + + //Cycle slip the relative delay by a clock cycle to prevent sample misalignment + //fpga_clk_delay > 0 and 0 < win_center < 2*(1/MCR) so one cycle slip is all we need + bool cycle_slip = (win_center-fpga_clk_delay >= master_clk_period); + if (cycle_slip) { + win_center -= master_clk_period; + } + + if (apply_delay) { + UHD_MSG(status) << "Validating..." << std::flush; + //Apply delay + win_center = mb.clock->set_clock_delay(X300_CLOCK_WHICH_ADC0, win_center); //Sets ADC0 and ADC1 + wait_for_clk_locked(mb.zpu_ctrl, ZPU_RB_CLK_STATUS_LMK_LOCK, 0.1); + //Validate + self_test_adcs(mb, 2000); + } else { + //Restore delay + mb.clock->set_clock_delay(X300_CLOCK_WHICH_ADC0, cached_clk_delay); //Sets ADC0 and ADC1 + } + + //Teardown + for (size_t r = 0; r < mboard_members_t::NUM_RADIOS; r++) { + mb.radio_perifs[r].adc->set_test_word("normal", "normal"); + mb.radio_perifs[r].misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 0); + } + UHD_MSG(status) << (boost::format(" done (FPGA->ADC=%.3fns%s, Window=%.3fns)\n") % + (win_center-fpga_clk_delay) % (cycle_slip?" +cyc":"") % win_length); + + return win_center; +} diff --git a/host/lib/usrp/x300/x300_clock_ctrl.cpp b/host/lib/usrp/x300/x300_clock_ctrl.cpp index 6450686dd..d5687f5cc 100644 --- a/host/lib/usrp/x300/x300_clock_ctrl.cpp +++ b/host/lib/usrp/x300/x300_clock_ctrl.cpp @@ -21,6 +21,7 @@ #include <uhd/utils/math.hpp> #include <boost/cstdint.hpp> #include <boost/format.hpp> +#include <boost/math/special_functions/round.hpp> #include <stdexcept> #include <cmath> #include <cstdlib> @@ -29,6 +30,30 @@ static const double X300_REF_CLK_OUT_RATE = 10e6; static const boost::uint16_t X300_MAX_CLKOUT_DIV = 1045; static const double X300_DEFAULT_DBOARD_CLK_RATE = 50e6; +struct x300_clk_delays { + x300_clk_delays() : + fpga_dly_ns(0.0),adc_dly_ns(0.0),dac_dly_ns(0.0),db_rx_dly_ns(0.0),db_tx_dly_ns(0.0) + {} + x300_clk_delays(double fpga, double adc, double dac, double db_rx, double db_tx) : + fpga_dly_ns(fpga),adc_dly_ns(adc),dac_dly_ns(dac),db_rx_dly_ns(db_rx),db_tx_dly_ns(db_tx) + {} + + double fpga_dly_ns; + double adc_dly_ns; + double dac_dly_ns; + double db_rx_dly_ns; + double db_tx_dly_ns; +}; + +// Tune the FPGA->ADC clock delay to ensure a safe ADC_SSCLK -> RADIO_CLK crossing. +// If the FPGA_CLK is delayed, we also need to delay the reference clocks going to the DAC +// because the data interface clock is generated from FPGA_CLK. +static const x300_clk_delays X300_REV0_6_CLK_DELAYS = x300_clk_delays( + /*fpga=*/0.000, /*adc=*/2.200, /*dac=*/0.000, /*db_rx=*/0.000, /*db_tx=*/0.000); + +static const x300_clk_delays X300_REV7_CLK_DELAYS = x300_clk_delays( + /*fpga=*/0.000, /*adc=*/0.000, /*dac=*/0.000, /*db_rx=*/0.000, /*db_tx=*/0.000); + using namespace uhd; x300_clock_ctrl::~x300_clock_ctrl(void){ @@ -213,6 +238,187 @@ public: _spiface->write_spi(_slaveno, spi_config_t::EDGE_RISE, data,32); } + double set_clock_delay(const x300_clock_which_t which, const double delay_ns, const bool resync = true) { + //All dividers have are delayed by 5 taps by default. The delay + //set by this function is relative to the 5 tap delay + static const boost::uint16_t DDLY_MIN_TAPS = 5; + static const boost::uint16_t DDLY_MAX_TAPS = 522; //Extended mode + + //The resolution and range of the analog delay is fixed + static const double ADLY_RES_NS = 0.025; + static const double ADLY_MIN_NS = 0.500; + static const double ADLY_MAX_NS = 0.975; + + //Each digital tap delays the clock by one VCO period + double vco_period_ns = 1.0e9/_vco_freq; + double half_vco_period_ns = vco_period_ns/2.0; + + //Implement as much of the requested delay using digital taps. Whatever is leftover + //will be made up using the analog delay element and the half-cycle digital tap. + //A caveat here is that the analog delay starts at ADLY_MIN_NS, so we need to back off + //by that much when coming up with the digital taps so that the difference can be made + //up using the analog delay. + boost::uint16_t ddly_taps = 0; + if (delay_ns < ADLY_MIN_NS) { + ddly_taps = static_cast<boost::uint16_t>(std::floor((delay_ns)/vco_period_ns)); + } else { + ddly_taps = static_cast<boost::uint16_t>(std::floor((delay_ns-ADLY_MIN_NS)/vco_period_ns)); + } + double leftover_delay = delay_ns - (vco_period_ns * ddly_taps); + + //Compute settings + boost::uint16_t ddly_value = ddly_taps + DDLY_MIN_TAPS; + bool adly_en = false; + boost::uint8_t adly_value = 0; + boost::uint8_t half_shift_en = 0; + + if (ddly_value > DDLY_MAX_TAPS) { + throw uhd::value_error("set_clock_delay: Requested delay is out of range."); + } + + double coerced_delay = (vco_period_ns * ddly_taps); + if (leftover_delay > ADLY_MAX_NS) { + //The VCO is running too slowly for us to compensate the digital delay difference using + //analog delay. Do the best we can. + adly_en = true; + adly_value = static_cast<boost::uint8_t>(boost::math::round((ADLY_MAX_NS-ADLY_MIN_NS)/ADLY_RES_NS)); + coerced_delay += ADLY_MAX_NS; + } else if (leftover_delay >= ADLY_MIN_NS && leftover_delay <= ADLY_MAX_NS) { + //The leftover delay can be compensated by the analog delay up to the analog delay resolution + adly_en = true; + adly_value = static_cast<boost::uint8_t>(boost::math::round((leftover_delay-ADLY_MIN_NS)/ADLY_RES_NS)); + coerced_delay += ADLY_MIN_NS+(ADLY_RES_NS*adly_value); + } else if (leftover_delay >= (ADLY_MIN_NS - half_vco_period_ns) && leftover_delay < ADLY_MIN_NS) { + //The leftover delay if less than the minimum supported analog delay but if we move the digital + //delay back by half a VCO cycle then it will be in the range of the analog delay. So do that! + adly_en = true; + adly_value = static_cast<boost::uint8_t>(boost::math::round((leftover_delay+half_vco_period_ns-ADLY_MIN_NS)/ADLY_RES_NS)); + half_shift_en = 1; + coerced_delay += ADLY_MIN_NS+(ADLY_RES_NS*adly_value)-half_vco_period_ns; + } else { + //Even after moving the digital delay back by half a cycle, we cannot make up the difference + //so give up on compensating for the difference from the digital delay tap. + //If control reaches here then the value of leftover_delay is possible very small and will still + //be close to what the client requested. + } + + UHD_LOGV(often) + << boost::format("x300_clock_ctrl::set_clock_delay: Which=%d, Requested=%f, Digital Taps=%d, Half Shift=%d, Analog Delay=%d (%s), Coerced Delay=%fns" + ) % which % delay_ns % ddly_value % (half_shift_en?"ON":"OFF") % ((int)adly_value) % (adly_en?"ON":"OFF") % coerced_delay << std::endl; + + //Apply settings + switch (which) + { + case X300_CLOCK_WHICH_FPGA: + _lmk04816_regs.CLKout0_1_DDLY = ddly_value; + _lmk04816_regs.CLKout0_1_HS = half_shift_en; + if (adly_en) { + _lmk04816_regs.CLKout0_ADLY_SEL = lmk04816_regs_t::CLKOUT0_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout1_ADLY_SEL = lmk04816_regs_t::CLKOUT1_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout0_1_ADLY = adly_value; + } else { + _lmk04816_regs.CLKout0_ADLY_SEL = lmk04816_regs_t::CLKOUT0_ADLY_SEL_D_PD; + _lmk04816_regs.CLKout1_ADLY_SEL = lmk04816_regs_t::CLKOUT1_ADLY_SEL_D_PD; + } + write_regs(0); + write_regs(6); + _delays.fpga_dly_ns = coerced_delay; + break; + case X300_CLOCK_WHICH_DB0_RX: + case X300_CLOCK_WHICH_DB1_RX: + _lmk04816_regs.CLKout2_3_DDLY = ddly_value; + _lmk04816_regs.CLKout2_3_HS = half_shift_en; + if (adly_en) { + _lmk04816_regs.CLKout2_ADLY_SEL = lmk04816_regs_t::CLKOUT2_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout3_ADLY_SEL = lmk04816_regs_t::CLKOUT3_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout2_3_ADLY = adly_value; + } else { + _lmk04816_regs.CLKout2_ADLY_SEL = lmk04816_regs_t::CLKOUT2_ADLY_SEL_D_PD; + _lmk04816_regs.CLKout3_ADLY_SEL = lmk04816_regs_t::CLKOUT3_ADLY_SEL_D_PD; + } + write_regs(1); + write_regs(6); + _delays.db_rx_dly_ns = coerced_delay; + break; + case X300_CLOCK_WHICH_DB0_TX: + case X300_CLOCK_WHICH_DB1_TX: + _lmk04816_regs.CLKout4_5_DDLY = ddly_value; + _lmk04816_regs.CLKout4_5_HS = half_shift_en; + if (adly_en) { + _lmk04816_regs.CLKout4_ADLY_SEL = lmk04816_regs_t::CLKOUT4_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout5_ADLY_SEL = lmk04816_regs_t::CLKOUT5_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout4_5_ADLY = adly_value; + } else { + _lmk04816_regs.CLKout4_ADLY_SEL = lmk04816_regs_t::CLKOUT4_ADLY_SEL_D_PD; + _lmk04816_regs.CLKout5_ADLY_SEL = lmk04816_regs_t::CLKOUT5_ADLY_SEL_D_PD; + } + write_regs(2); + write_regs(7); + _delays.db_tx_dly_ns = coerced_delay; + break; + case X300_CLOCK_WHICH_DAC0: + case X300_CLOCK_WHICH_DAC1: + _lmk04816_regs.CLKout6_7_DDLY = ddly_value; + _lmk04816_regs.CLKout6_7_HS = half_shift_en; + if (adly_en) { + _lmk04816_regs.CLKout6_ADLY_SEL = lmk04816_regs_t::CLKOUT6_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout7_ADLY_SEL = lmk04816_regs_t::CLKOUT7_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout6_7_ADLY = adly_value; + } else { + _lmk04816_regs.CLKout6_ADLY_SEL = lmk04816_regs_t::CLKOUT6_ADLY_SEL_D_PD; + _lmk04816_regs.CLKout7_ADLY_SEL = lmk04816_regs_t::CLKOUT7_ADLY_SEL_D_PD; + } + write_regs(3); + write_regs(7); + _delays.dac_dly_ns = coerced_delay; + break; + case X300_CLOCK_WHICH_ADC0: + case X300_CLOCK_WHICH_ADC1: + _lmk04816_regs.CLKout8_9_DDLY = ddly_value; + _lmk04816_regs.CLKout8_9_HS = half_shift_en; + if (adly_en) { + _lmk04816_regs.CLKout8_ADLY_SEL = lmk04816_regs_t::CLKOUT8_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout9_ADLY_SEL = lmk04816_regs_t::CLKOUT9_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout8_9_ADLY = adly_value; + } else { + _lmk04816_regs.CLKout8_ADLY_SEL = lmk04816_regs_t::CLKOUT8_ADLY_SEL_D_PD; + _lmk04816_regs.CLKout9_ADLY_SEL = lmk04816_regs_t::CLKOUT9_ADLY_SEL_D_PD; + } + write_regs(4); + write_regs(8); + _delays.adc_dly_ns = coerced_delay; + break; + default: + throw uhd::value_error("set_clock_delay: Requested source is invalid."); + } + + //Delays are applied only on a sync event + if (resync) sync_clocks(); + + return coerced_delay; + } + + double get_clock_delay(const x300_clock_which_t which) { + switch (which) + { + case X300_CLOCK_WHICH_FPGA: + return _delays.fpga_dly_ns; + case X300_CLOCK_WHICH_DB0_RX: + case X300_CLOCK_WHICH_DB1_RX: + return _delays.db_rx_dly_ns; + case X300_CLOCK_WHICH_DB0_TX: + case X300_CLOCK_WHICH_DB1_TX: + return _delays.db_tx_dly_ns; + case X300_CLOCK_WHICH_DAC0: + case X300_CLOCK_WHICH_DAC1: + return _delays.dac_dly_ns; + case X300_CLOCK_WHICH_ADC0: + case X300_CLOCK_WHICH_ADC1: + return _delays.adc_dly_ns; + default: + throw uhd::value_error("get_clock_delay: Requested source is invalid."); + } + } private: @@ -409,7 +615,6 @@ private: _lmk04816_regs.CLKout0_1_PD = lmk04816_regs_t::CLKOUT0_1_PD_POWER_UP; this->write_regs(0); _lmk04816_regs.CLKout0_1_DIV = master_clock_div; - _lmk04816_regs.CLKout0_ADLY_SEL = lmk04816_regs_t::CLKOUT0_ADLY_SEL_D_EV_X; this->write_regs(0); // Register 1 @@ -433,9 +638,6 @@ private: _lmk04816_regs.CLKout1_TYPE = lmk04816_regs_t::CLKOUT1_TYPE_P_DOWN; //CPRI feedback clock, use LVDS _lmk04816_regs.CLKout2_TYPE = lmk04816_regs_t::CLKOUT2_TYPE_LVPECL_700MVPP; //DB_0_RX _lmk04816_regs.CLKout3_TYPE = lmk04816_regs_t::CLKOUT3_TYPE_LVPECL_700MVPP; //DB_1_RX - // Analog delay of 900ps to synchronize the radio clock with the source synchronous ADC clocks. - // This delay may need to vary due to temperature. Tested and verified at room temperature only. - _lmk04816_regs.CLKout0_1_ADLY = 0x10; // Register 7 _lmk04816_regs.CLKout4_TYPE = lmk04816_regs_t::CLKOUT4_TYPE_LVPECL_700MVPP; //DB_1_TX @@ -501,6 +703,19 @@ private: // PLL2_P_30 set in individual cases above // PLL2_N_30 set in individual cases above + if (_hw_rev >= 7) { + _delays = X300_REV7_CLK_DELAYS; + } else { + _delays = X300_REV0_6_CLK_DELAYS; + } + + //Apply delay values + set_clock_delay(X300_CLOCK_WHICH_FPGA, _delays.fpga_dly_ns, false); + set_clock_delay(X300_CLOCK_WHICH_DB0_RX, _delays.db_rx_dly_ns, false); //Sets both Ch0 and Ch1 + set_clock_delay(X300_CLOCK_WHICH_DB0_TX, _delays.db_tx_dly_ns, false); //Sets both Ch0 and Ch1 + set_clock_delay(X300_CLOCK_WHICH_ADC0, _delays.adc_dly_ns, false); //Sets both Ch0 and Ch1 + set_clock_delay(X300_CLOCK_WHICH_DAC0, _delays.dac_dly_ns, false); //Sets both Ch0 and Ch1 + /* Write the configuration values into the LMK */ for (size_t i = 1; i <= 16; ++i) { this->write_regs(i); @@ -512,13 +727,14 @@ private: this->sync_clocks(); } - const spi_iface::sptr _spiface; - const size_t _slaveno; - const size_t _hw_rev; - const double _master_clock_rate; - const double _system_ref_rate; - lmk04816_regs_t _lmk04816_regs; - double _vco_freq; + const spi_iface::sptr _spiface; + const size_t _slaveno; + const size_t _hw_rev; + const double _master_clock_rate; + const double _system_ref_rate; + lmk04816_regs_t _lmk04816_regs; + double _vco_freq; + x300_clk_delays _delays; }; x300_clock_ctrl::sptr x300_clock_ctrl::make(uhd::spi_iface::sptr spiface, diff --git a/host/lib/usrp/x300/x300_clock_ctrl.hpp b/host/lib/usrp/x300/x300_clock_ctrl.hpp index 9c08aa356..160a14e6d 100644 --- a/host/lib/usrp/x300/x300_clock_ctrl.hpp +++ b/host/lib/usrp/x300/x300_clock_ctrl.hpp @@ -33,7 +33,7 @@ enum x300_clock_which_t X300_CLOCK_WHICH_DB0_TX, X300_CLOCK_WHICH_DB1_RX, X300_CLOCK_WHICH_DB1_TX, - X300_CLOCK_WHICH_TEST, + X300_CLOCK_WHICH_FPGA, }; class x300_clock_ctrl : boost::noncopyable @@ -94,6 +94,22 @@ public: */ virtual void set_ref_out(const bool) = 0; + /*! Set the clock delay for the given clock divider. + * \param which which clock + * \param rate the delay in nanoseconds + * \param resync resync clocks to apply delays + * \return the actual delay value set + * \throw exception when which invalid or delay_ns out of range + */ + virtual double set_clock_delay(const x300_clock_which_t which, const double delay_ns, const bool resync = true) = 0; + + /*! Get the clock delay for the given clock divider. + * \param which which clock + * \return the actual delay value set + * \throw exception when which invalid + */ + virtual double get_clock_delay(const x300_clock_which_t which) = 0; + /*! Reset the clocks. * Should be called if the reference clock changes * to reduce the time required to achieve a lock. diff --git a/host/lib/usrp/x300/x300_dac_ctrl.cpp b/host/lib/usrp/x300/x300_dac_ctrl.cpp index d3bcb8644..bb41146b6 100644 --- a/host/lib/usrp/x300/x300_dac_ctrl.cpp +++ b/host/lib/usrp/x300/x300_dac_ctrl.cpp @@ -129,12 +129,16 @@ public: _check_pll(); // Configure digital interface settings - write_ad9146_reg(0x16, 0x02); // Skew DCI signal by 615ps to find stable data eye - write_ad9146_reg(0x03, 0x00); // 2's comp, I first, byte wide interface - //fpga wants I,Q in the sample word: - //first transaction goes into low bits - //second transaction goes into high bits - //therefore, we want Q to go first (bit 6 == 1) + // Bypass DCI delay. We center the clock edge in the data + // valid window in the FPGA by phase shifting the DCI going + // to the DAC. + write_ad9146_reg(0x16, 0x04); + // 2's comp, I first, byte wide interface + write_ad9146_reg(0x03, 0x00); + // FPGA wants I,Q in the sample word: + // - First transaction goes into low bits + // - Second transaction goes into high bits + // therefore, we want Q to go first (bit 6 == 1) write_ad9146_reg(0x03, (1 << 6)); //2s comp, i first, byte mode // Configure interpolation filters diff --git a/host/lib/usrp/x300/x300_fw_common.h b/host/lib/usrp/x300/x300_fw_common.h index 76531f921..6493e938d 100644 --- a/host/lib/usrp/x300/x300_fw_common.h +++ b/host/lib/usrp/x300/x300_fw_common.h @@ -29,10 +29,11 @@ extern "C" { #endif -#define X300_MAX_HW_REV 6 -#define X300_FW_COMPAT_MAJOR 3 +#define X300_REVISION_COMPAT 7 +#define X300_REVISION_MIN 2 +#define X300_FW_COMPAT_MAJOR 4 #define X300_FW_COMPAT_MINOR 0 -#define X300_FPGA_COMPAT_MAJOR 9 +#define X300_FPGA_COMPAT_MAJOR 13 //shared memory sections - in between the stack and the program space #define X300_FW_SHMEM_BASE 0x6000 diff --git a/host/lib/usrp/x300/x300_image_loader.cpp b/host/lib/usrp/x300/x300_image_loader.cpp new file mode 100644 index 000000000..321309868 --- /dev/null +++ b/host/lib/usrp/x300/x300_image_loader.cpp @@ -0,0 +1,402 @@ +// +// Copyright 2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <fstream> +#include <vector> + +#include <boost/algorithm/string.hpp> +#include <boost/filesystem.hpp> +#include <boost/property_tree/ptree.hpp> +#include <boost/property_tree/xml_parser.hpp> + +#include <uhd/config.hpp> +#include <uhd/device.hpp> +#include <uhd/image_loader.hpp> +#include <uhd/exception.hpp> +#include <uhd/transport/udp_simple.hpp> +#include <uhd/transport/nirio/niusrprio_session.h> +#include <uhd/transport/nirio/status.h> +#include <uhd/utils/byteswap.hpp> +#include <uhd/utils/paths.hpp> +#include <uhd/utils/static.hpp> + +#include "x300_impl.hpp" +#include "x300_fw_common.h" +#include "cdecode.h" + +namespace fs = boost::filesystem; + +using namespace boost::algorithm; +using namespace uhd; +using namespace uhd::transport; + +/* + * Constants + */ +#define X300_FPGA_BIN_SIZE_BYTES 15877916 +#define X300_FPGA_BIT_SIZE_BYTES 15878032 +#define X300_FPGA_PROG_UDP_PORT 49157 +#define X300_FLASH_SECTOR_SIZE 131072 +#define X300_PACKET_SIZE_BYTES 256 +#define X300_FPGA_SECTOR_START 32 +#define X300_MAX_RESPONSE_BYTES 128 +#define UDP_TIMEOUT 3 +#define FPGA_LOAD_TIMEOUT 15 + +/* + * Packet structure + */ +typedef struct { + boost::uint32_t flags; + boost::uint32_t sector; + boost::uint32_t index; + boost::uint32_t size; + union { + boost::uint8_t data8[X300_PACKET_SIZE_BYTES]; + boost::uint16_t data16[X300_PACKET_SIZE_BYTES/2]; + }; +} x300_fpga_update_data_t; + +/* + * X-Series burn session + */ +typedef struct { + bool found; + bool ethernet; + bool configure; // Reload FPGA after burning to flash (Ethernet only) + bool verify; // Device will verify the download along the way (Ethernet only) + bool lvbitx; + uhd::device_addr_t dev_addr; + std::string ip_addr; + std::string fpga_type; + std::string resource; + std::string filepath; + std::string rpc_port; + boost::uint32_t size; + udp_simple::sptr xport; + std::vector<char> bitstream; // .bin image extracted from .lvbitx file + boost::uint8_t data_in[udp_simple::mtu]; +} x300_session_t; + +/* + * Extract the .bin image from the given LVBITX file. + */ +static void extract_from_lvbitx(x300_session_t &session){ + boost::property_tree::ptree pt; + boost::property_tree::xml_parser::read_xml(session.filepath.c_str(), pt, + boost::property_tree::xml_parser::no_comments | + boost::property_tree::xml_parser::trim_whitespace); + const std::string encoded_bitstream(pt.get<std::string>("Bitfile.Bitstream")); + std::vector<char> decoded_bitstream(encoded_bitstream.size()); + + base64_decodestate decode_state; + base64_init_decodestate(&decode_state); + const size_t decoded_size = base64_decode_block(encoded_bitstream.c_str(), + encoded_bitstream.size(), &decoded_bitstream.front(), &decode_state); + decoded_bitstream.resize(decoded_size); + session.bitstream.swap(decoded_bitstream); + + session.size = session.bitstream.size(); +} + +/* + * Validate X300 image and extract if LVBITX. + */ +static void x300_validate_image(x300_session_t &session){ + if(not fs::exists(session.filepath)){ + throw uhd::runtime_error(str(boost::format("Could not find image at path \"%s\".") + % session.filepath)); + } + + std::string extension = fs::extension(session.filepath); + session.lvbitx = (extension == ".lvbitx"); + + if(session.lvbitx){ + extract_from_lvbitx(session); + if(session.size > X300_FPGA_BIN_SIZE_BYTES){ + throw uhd::runtime_error(str(boost::format("The specified FPGA image is too large: %d vs. %d") + % session.size % X300_FPGA_BIN_SIZE_BYTES)); + } + + /* + * PCIe burning just takes a filepath, even for a .lvbitx file, + * so just extract it to validate the size. + */ + if(!session.ethernet) session.bitstream.clear(); + } + else if(extension == ".bin" or extension == ".bit"){ + boost::uint32_t max_size = (extension == ".bin") ? X300_FPGA_BIN_SIZE_BYTES + : X300_FPGA_BIT_SIZE_BYTES; + + session.size = fs::file_size(session.filepath); + if(session.size > max_size){ + throw uhd::runtime_error(str(boost::format("The specified FPGA image is too large: %d vs. %d") + % session.size % max_size)); + return; + } + } + else{ + throw uhd::runtime_error(str(boost::format("Invalid extension \"%s\". Extension must be .bin, .bit, or .lvbitx.") + % extension)); + } +} + +static void x300_setup_session(x300_session_t &session, + const device_addr_t &args, + const std::string &filepath){ + device_addr_t find_args; + find_args["type"] = "x300"; + if(args.has_key("name")) find_args["name"] = args["name"]; + if(args.has_key("serial")) find_args["serial"] = args["serial"]; + if(args.has_key("ip-addr")) find_args["addr"] = args["ip-addr"]; + else if(args.has_key("resource")) find_args["resource"] = args["resource"]; + + device_addrs_t devs = x300_find(args); + session.found = (devs.size() > 0); + if(!session.found) return; + + session.dev_addr = devs[0]; + session.ethernet = session.dev_addr.has_key("addr"); + if(session.ethernet){ + session.ip_addr = session.dev_addr["addr"]; + session.configure = args.has_key("configure"); + session.xport = udp_simple::make_connected(session.ip_addr, + BOOST_STRINGIZE(X300_FPGA_PROG_UDP_PORT)); + session.verify = args.has_key("verify"); + } + else{ + session.resource = session.dev_addr["resource"]; + session.rpc_port = args.get("rpc-port", "5444"); + } + + /* + * The user can specify an FPGA type (1G, HGS, XGS), rather than a filename. If the user + * does not specify one, this will default to the type currently on the device. If this + * cannot be determined, then the user is forced to specify a filename. + */ + session.fpga_type = args.get("fpga", session.dev_addr.get("fpga", "")); + if(filepath == ""){ + if(!session.dev_addr.has_key("product") or session.fpga_type == ""){ + throw uhd::runtime_error("Found a device but could not auto-generate an image filename."); + } + else session.filepath = find_image_path(str(boost::format("usrp_%s_fpga_%s.bit") + % (to_lower_copy(session.dev_addr["product"])) + % session.fpga_type)); + } + else session.filepath = filepath; + + // Validate image + x300_validate_image(session); +} + +/* + * Ethernet communication functions + */ +static UHD_INLINE size_t x300_send_and_recv(udp_simple::sptr xport, + boost::uint32_t pkt_code, + x300_fpga_update_data_t *pkt_out, + boost::uint8_t* data){ + pkt_out->flags = uhd::htonx<boost::uint32_t>(pkt_code); + xport->send(boost::asio::buffer(pkt_out, sizeof(*pkt_out))); + return xport->recv(boost::asio::buffer(data, udp_simple::mtu), UDP_TIMEOUT); +} + +static UHD_INLINE bool x300_recv_ok(const x300_fpga_update_data_t *pkt_in, + size_t len){ + return (len > 0 and + ((ntohl(pkt_in->flags) & X300_FPGA_PROG_FLAGS_ERROR) != X300_FPGA_PROG_FLAGS_ERROR)); +} + +// Image data needs to be bitswapped +static UHD_INLINE void x300_bitswap(boost::uint8_t *num){ + *num = ((*num & 0xF0) >> 4) | ((*num & 0x0F) << 4); + *num = ((*num & 0xCC) >> 2) | ((*num & 0x33) << 2); + *num = ((*num & 0xAA) >> 1) | ((*num & 0x55) << 1); +} + +static void x300_ethernet_load(x300_session_t &session){ + + // UDP receive buffer + x300_fpga_update_data_t pkt_out; + const x300_fpga_update_data_t *pkt_in = reinterpret_cast<const x300_fpga_update_data_t*>(session.data_in); + + // Initialize write session + boost::uint32_t flags = X300_FPGA_PROG_FLAGS_ACK | X300_FPGA_PROG_FLAGS_INIT; + size_t len = x300_send_and_recv(session.xport, flags, &pkt_out, session.data_in); + if(x300_recv_ok(pkt_in, len)){ + std::cout << "-- Initializing FPGA loading..." << std::flush; + } + else if(len == 0){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Timed out waiting for reply from device."); + } + else{ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Device reported an error during initialization."); + } + + std::cout << "successful." << std::endl; + if(session.verify){ + std::cout << "-- NOTE: Device is verifying the image it is receiving, increasing the loading time." << std::endl; + } + + size_t current_pos = 0; + size_t sectors = (session.size / X300_FLASH_SECTOR_SIZE); + std::ifstream image(session.filepath.c_str(), std::ios::binary); + + // Each sector + for(size_t i = 0; i < session.size; i += X300_FLASH_SECTOR_SIZE){ + + // Print progress percentage at beginning of each sector + std::cout << boost::format("\r-- Loading %s FPGA image: %d%% (%d/%d sectors)") + % session.fpga_type + % (int(double(i) / double(session.size) * 100.0)) + % (i / X300_FLASH_SECTOR_SIZE) + % sectors + << std::flush; + + // Each packet + for(size_t j = i; (j < session.size and j < (i+X300_FLASH_SECTOR_SIZE)); j += X300_PACKET_SIZE_BYTES){ + flags = X300_FPGA_PROG_FLAGS_ACK; + if(j == i) flags |= X300_FPGA_PROG_FLAGS_ERASE; // Erase at beginning of sector + if(session.verify) flags |= X300_FPGA_PROG_FLAGS_VERIFY; + + // Set burn location + pkt_out.sector = htonx<boost::uint32_t>(X300_FPGA_SECTOR_START + (i/X300_FLASH_SECTOR_SIZE)); + pkt_out.index = htonx<boost::uint32_t>((j % X300_FLASH_SECTOR_SIZE) / 2); + pkt_out.size = htonx<boost::uint32_t>(X300_PACKET_SIZE_BYTES / 2); + + // Read next piece of image + memset(pkt_out.data8, 0, X300_PACKET_SIZE_BYTES); + if(session.lvbitx){ + memcpy(pkt_out.data8, &session.bitstream[current_pos], X300_PACKET_SIZE_BYTES); + current_pos += X300_PACKET_SIZE_BYTES; + } + else{ + image.read((char*)pkt_out.data8, X300_PACKET_SIZE_BYTES); + } + + // Data must be bitswapped and byteswapped + for(size_t k = 0; k < X300_PACKET_SIZE_BYTES; k++){ + x300_bitswap(&pkt_out.data8[k]); + } + for(size_t k = 0; k < (X300_PACKET_SIZE_BYTES/2); k++){ + pkt_out.data16[k] = htonx<boost::uint16_t>(pkt_out.data16[k]); + } + + len = x300_send_and_recv(session.xport, flags, &pkt_out, session.data_in); + if(len == 0){ + if(!session.lvbitx) image.close(); + throw uhd::runtime_error("Timed out waiting for reply from device."); + } + else if((ntohl(pkt_in->flags) & X300_FPGA_PROG_FLAGS_ERROR)){ + if(!session.lvbitx) image.close(); + throw uhd::runtime_error("Device reported an error."); + } + } + } + if(!session.lvbitx){ + image.close(); + } + + std::cout << boost::format("\r-- Loading %s FPGA image: 100%% (%d/%d sectors)") + % session.fpga_type + % sectors + % sectors + << std::endl; + + // Cleanup + if(!session.lvbitx) image.close(); + flags = (X300_FPGA_PROG_FLAGS_CLEANUP | X300_FPGA_PROG_FLAGS_ACK); + pkt_out.sector = pkt_out.index = pkt_out.size = 0; + memset(pkt_out.data8, 0, X300_PACKET_SIZE_BYTES); + std::cout << "-- Finalizing image load..." << std::flush; + len = x300_send_and_recv(session.xport, flags, &pkt_out, session.data_in); + if(len == 0){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Timed out waiting for reply from device."); + } + else if((ntohl(pkt_in->flags) & X300_FPGA_PROG_FLAGS_ERROR)){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Device reported an error during cleanup."); + } + else std::cout << "successful." << std::endl; + + // Save new FPGA image (if option set) + if(session.configure){ + flags = (X300_FPGA_PROG_CONFIGURE | X300_FPGA_PROG_FLAGS_ACK); + x300_send_and_recv(session.xport, flags, &pkt_out, session.data_in); + std::cout << "-- Saving image onto device..." << std::flush; + if(len == 0){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Timed out waiting for reply from device."); + } + else if((ntohl(pkt_in->flags) & X300_FPGA_PROG_FLAGS_ERROR)){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Device reported an error while saving the image."); + } + else std::cout << "successful." << std::endl; + } +} + +static void x300_pcie_load(x300_session_t &session){ + + std::cout << boost::format("\r-- Loading %s FPGA image (this will take 5-10 minutes)...") + % session.fpga_type + << std::flush; + + nirio_status status = NiRio_Status_Success; + niusrprio::niusrprio_session fpga_session(session.resource, session.rpc_port); + nirio_status_chain(fpga_session.download_bitstream_to_flash(session.filepath), status); + + if(nirio_status_fatal(status)){ + std::cout << "failed." << std::endl; + niusrprio::nirio_status_to_exception(status, "NI-RIO reported the following error:"); + } + else std::cout << "successful." << std::endl; +} + +static bool x300_image_loader(const image_loader::image_loader_args_t &image_loader_args){ + // See if any X3x0 with the given args is found + device_addrs_t devs = x300_find(image_loader_args.args); + if(devs.size() == 0 or !image_loader_args.load_fpga) return false; + + x300_session_t session; + x300_setup_session(session, + image_loader_args.args, + image_loader_args.fpga_path + ); + if(!session.found) return false; + + std::cout << boost::format("Unit: USRP %s (%s, %s)\nFPGA Image: %s\n") + % session.dev_addr["product"] + % session.dev_addr["serial"] + % session.dev_addr[session.ethernet ? "addr" : "resource"] + % session.filepath; + + if(session.ethernet) x300_ethernet_load(session); + else x300_pcie_load(session); + return true; +} + +UHD_STATIC_BLOCK(register_x300_image_loader){ + std::string recovery_instructions = "Aborting. Your USRP X-Series device will likely be unusable. Visit\n" + "http://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_load_fpga_imgs_jtag\n" + "for details on restoring your device."; + + image_loader::register_image_loader("x300", x300_image_loader, recovery_instructions); +} diff --git a/host/lib/usrp/x300/x300_impl.cpp b/host/lib/usrp/x300/x300_impl.cpp index aff150acb..903b63198 100644 --- a/host/lib/usrp/x300/x300_impl.cpp +++ b/host/lib/usrp/x300/x300_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2013-2014 Ettus Research LLC +// Copyright 2013-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -16,7 +16,6 @@ // #include "x300_impl.hpp" -#include "x300_regs.hpp" #include "x300_lvbitx.hpp" #include "x310_lvbitx.hpp" #include <boost/algorithm/string.hpp> @@ -41,7 +40,7 @@ #define NIUSRPRIO_DEFAULT_RPC_PORT "5444" -#define X300_REV(x) (x - "A" + 1) +#define X300_REV(x) ((x) - "A" + 1) using namespace uhd; using namespace uhd::usrp; @@ -236,7 +235,7 @@ static device_addrs_t x300_find_pcie(const device_addr_t &hint, bool explicit_qu return addrs; } -static device_addrs_t x300_find(const device_addr_t &hint_) +device_addrs_t x300_find(const device_addr_t &hint_) { //handle the multi-device discovery device_addrs_t hints = separate_device_addr(hint_); @@ -400,7 +399,7 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) default: nirio_status_to_exception(status, "Motherboard detection error. Please ensure that you \ have a valid USRP X3x0, NI USRP-294xR or NI USRP-295xR device and that all the device \ - driver have been loaded."); + drivers have loaded successfully."); } //Load the lvbitx onto the device UHD_MSG(status) << boost::format("Using LVBITX bitfile %s...\n") % lvbitx->get_bitfile_path(); @@ -508,9 +507,10 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) x300_load_fw(mb.zpu_ctrl, x300_fw_image); } - //check compat -- good place to do after conditional loading + //check compat numbers + //check fpga compat before fw compat because the fw is a subset of the fpga image + this->check_fpga_compat(mb_path, mb); this->check_fw_compat(mb_path, mb.zpu_ctrl); - this->check_fpga_compat(mb_path, mb.zpu_ctrl); //store which FPGA image is loaded mb.loaded_fpga_image = get_fpga_option(mb.zpu_ctrl); @@ -558,6 +558,13 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) .set(mb_eeprom) .subscribe(boost::bind(&x300_impl::set_mb_eeprom, this, mb.zpu_i2c, _1)); + bool recover_mb_eeprom = dev_addr.has_key("recover_mb_eeprom"); + if (recover_mb_eeprom) { + UHD_MSG(warning) << "UHD is operating in EEPROM Recovery Mode which disables hardware version " + "checks.\nOperating in this mode may cause hardware damage and unstable " + "radio performance!"<< std::endl; + } + //////////////////////////////////////////////////////////////////// // parse the product number //////////////////////////////////////////////////////////////////// @@ -570,7 +577,10 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) product_name = "X310"; break; default: - break; + if (not recover_mb_eeprom) + throw uhd::runtime_error("Unrecognized product type.\n" + "Either the software does not support this device in which case please update your driver software to the latest version and retry OR\n" + "The product code in the EEPROM is corrupt and may require reprogramming."); } _tree->create<std::string>(mb_path / "name").set(product_name); _tree->create<std::string>(mb_path / "codename").set("Yetti"); @@ -602,36 +612,57 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) } //////////////////////////////////////////////////////////////////// - // create clock control objects + // read hardware revision and compatibility number //////////////////////////////////////////////////////////////////// - UHD_MSG(status) << "Setup RF frontend clocking..." << std::endl; - mb.hw_rev = 0; if(mb_eeprom.has_key("revision") and not mb_eeprom["revision"].empty()) { try { mb.hw_rev = boost::lexical_cast<size_t>(mb_eeprom["revision"]); } catch(...) { - UHD_MSG(warning) << "Revision in EEPROM is invalid! Please reprogram your EEPROM." << std::endl; + if (not recover_mb_eeprom) + throw uhd::runtime_error("Revision in EEPROM is invalid! Please reprogram your EEPROM."); } } else { - UHD_MSG(warning) << "No revision detected MB EEPROM must be reprogrammed!" << std::endl; + if (not recover_mb_eeprom) + throw uhd::runtime_error("No revision detected. MB EEPROM must be reprogrammed!"); } - if(mb.hw_rev == 0) { - UHD_MSG(warning) << "Defaulting to X300 RevD Clock Settings. This will result in non-optimal lock times." << std::endl; - mb.hw_rev = X300_REV("D"); + size_t hw_rev_compat = 0; + if (mb.hw_rev >= 7) { //Revision compat was added with revision 7 + if (mb_eeprom.has_key("revision_compat") and not mb_eeprom["revision_compat"].empty()) { + try { + hw_rev_compat = boost::lexical_cast<size_t>(mb_eeprom["revision_compat"]); + } catch(...) { + if (not recover_mb_eeprom) + throw uhd::runtime_error("Revision compat in EEPROM is invalid! Please reprogram your EEPROM."); + } + } else { + if (not recover_mb_eeprom) + throw uhd::runtime_error("No revision compat detected. MB EEPROM must be reprogrammed!"); + } + } else { + //For older HW just assume that revision_compat = revision + hw_rev_compat = mb.hw_rev; } - if (mb.hw_rev > X300_MAX_HW_REV) { - throw uhd::runtime_error(str( - boost::format("Unsupported board revision number: %d.\n" - "The maximum board revision number supported in this version is %d.\n" - "Please update your UHD version.") - % mb.hw_rev % X300_MAX_HW_REV - )); + if (hw_rev_compat > X300_REVISION_COMPAT) { + if (not recover_mb_eeprom) + throw uhd::runtime_error(str(boost::format( + "Hardware is too new for this software. Please upgrade to a driver that supports hardware revision %d.") + % mb.hw_rev)); + } else if (mb.hw_rev < X300_REVISION_MIN) { //Compare min against the revision (and not compat) to give us more leeway for partial support for a compat + if (not recover_mb_eeprom) + throw uhd::runtime_error(str(boost::format( + "Software is too new for this hardware. Please downgrade to a driver that supports hardware revision %d.") + % mb.hw_rev)); } - //Create clock control. NOTE: This does not configure the LMK yet. + //////////////////////////////////////////////////////////////////// + // create clock control objects + //////////////////////////////////////////////////////////////////// + UHD_MSG(status) << "Setup RF frontend clocking..." << std::endl; + + //Initialize clock control registers. NOTE: This does not configure the LMK yet. initialize_clock_control(mb); mb.clock = x300_clock_ctrl::make(mb.zpu_spi, 1 /*slaveno*/, @@ -696,23 +727,33 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) //////////////////////////////////////////////////////////////////// // setup radios //////////////////////////////////////////////////////////////////// - UHD_MSG(status) << "Initialize Radio control..." << std::endl; - this->setup_radio(mb_i, "A"); - this->setup_radio(mb_i, "B"); + this->setup_radio(mb_i, "A", dev_addr); + this->setup_radio(mb_i, "B", dev_addr); + + //////////////////////////////////////////////////////////////////// + // ADC test and cal + //////////////////////////////////////////////////////////////////// + if (dev_addr.has_key("self_cal_adc_delay")) { + self_cal_adc_xfer_delay(mb, true /* Apply ADC delay */); + } + if (dev_addr.has_key("ext_adc_self_test")) { + extended_adc_test(mb, dev_addr.cast<double>("ext_adc_self_test", 30)); + } else { + self_test_adcs(mb); + } //////////////////////////////////////////////////////////////////// // front panel gpio //////////////////////////////////////////////////////////////////// mb.fp_gpio = gpio_core_200::make(mb.radio_perifs[0].ctrl, TOREG(SR_FP_GPIO), RB32_FP_GPIO); - const std::vector<std::string> GPIO_ATTRS = boost::assign::list_of("CTRL")("DDR")("OUT")("ATR_0X")("ATR_RX")("ATR_TX")("ATR_XX"); - BOOST_FOREACH(const std::string &attr, GPIO_ATTRS) + BOOST_FOREACH(const gpio_attr_map_t::value_type attr, gpio_attr_map) { - _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / attr) + _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / attr.second) .set(0) - .subscribe(boost::bind(&x300_impl::set_fp_gpio, this, mb.fp_gpio, attr, _1)); + .subscribe(boost::bind(&x300_impl::set_fp_gpio, this, mb.fp_gpio, attr.first, _1)); } _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / "READBACK") - .publish(boost::bind(&x300_impl::get_fp_gpio, this, mb.fp_gpio, "READBACK")); + .publish(boost::bind(&x300_impl::get_fp_gpio, this, mb.fp_gpio)); //////////////////////////////////////////////////////////////////// // register the time keepers - only one can be the highlander @@ -745,8 +786,7 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) //////////////////////////////////////////////////////////////////// _tree->create<std::string>(mb_path / "clock_source" / "value") .set("internal") - .subscribe(boost::bind(&x300_impl::update_clock_source, this, boost::ref(mb), _1)) - .subscribe(boost::bind(&x300_impl::reset_radios, this, boost::ref(mb))); + .subscribe(boost::bind(&x300_impl::update_clock_source, this, boost::ref(mb), _1)); static const std::vector<std::string> clock_source_options = boost::assign::list_of("internal")("external")("gpsdo"); _tree->create<std::vector<std::string> >(mb_path / "clock_source" / "options").set(clock_source_options); @@ -829,8 +869,13 @@ x300_impl::~x300_impl(void) { BOOST_FOREACH(mboard_members_t &mb, _mb) { - mb.radio_perifs[0].ctrl->poke32(TOREG(SR_MISC_OUTS), (1 << 2)); //disable/reset ADC/DAC - mb.radio_perifs[1].ctrl->poke32(TOREG(SR_MISC_OUTS), (1 << 2)); //disable/reset ADC/DAC + //Disable/reset ADC/DAC + mb.radio_perifs[0].misc_outs->set(radio_misc_outs_reg::ADC_RESET, 1); + mb.radio_perifs[0].misc_outs->set(radio_misc_outs_reg::DAC_RESET_N, 0); + mb.radio_perifs[0].misc_outs->set(radio_misc_outs_reg::DAC_ENABLED, 0); + mb.radio_perifs[0].misc_outs->flush(); + mb.radio_perifs[1].misc_outs->set(radio_misc_outs_reg::DAC_ENABLED, 0); + mb.radio_perifs[1].misc_outs->flush(); //kill the claimer task and unclaim the device mb.claimer_task.reset(); @@ -850,15 +895,7 @@ x300_impl::~x300_impl(void) } } -static void check_adc(wb_iface::sptr iface, const boost::uint32_t val) -{ - boost::uint32_t adc_rb = iface->peek32(RB32_RX); - adc_rb ^= 0xfffc0000; //adapt for I inversion in FPGA - //UHD_MSG(status) << "adc_rb " << std::hex << adc_rb << " val " << std::hex << val << std::endl; - UHD_ASSERT_THROW(adc_rb == val); -} - -void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name) +void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name, const uhd::device_addr_t &dev_addr) { const fs_path mb_path = "/mboards/"+boost::lexical_cast<std::string>(mb_i); UHD_ASSERT_THROW(mb_i < _mb.size()); @@ -866,6 +903,8 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name) const size_t radio_index = mb.get_radio_index(slot_name); radio_perifs_t &perif = mb.radio_perifs[radio_index]; + UHD_MSG(status) << boost::format("Initialize Radio%d control...") % radio_index << std::endl; + //////////////////////////////////////////////////////////////////// // radio control //////////////////////////////////////////////////////////////////// @@ -873,8 +912,22 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name) boost::uint32_t ctrl_sid; both_xports_t xport = this->make_transport(mb_i, dest, X300_RADIO_DEST_PREFIX_CTRL, device_addr_t(), ctrl_sid); perif.ctrl = radio_ctrl_core_3000::make(mb.if_pkt_is_big_endian, xport.recv, xport.send, ctrl_sid, slot_name); - perif.ctrl->poke32(TOREG(SR_MISC_OUTS), (1 << 2)); //reset adc + dac - perif.ctrl->poke32(TOREG(SR_MISC_OUTS), (1 << 1) | (1 << 0)); //out of reset + dac enable + + perif.misc_outs = boost::make_shared<radio_misc_outs_reg>(); + perif.misc_ins = boost::make_shared<radio_misc_ins_reg>(); + perif.misc_outs->initialize(*perif.ctrl, true); + perif.misc_ins->initialize(*perif.ctrl); + + //Only Radio0 has the ADC/DAC reset bits. Those bits are reserved for Radio1 + if (radio_index == 0) { + perif.misc_outs->set(radio_misc_outs_reg::ADC_RESET, 1); + perif.misc_outs->set(radio_misc_outs_reg::DAC_RESET_N, 0); + perif.misc_outs->flush(); + perif.misc_outs->set(radio_misc_outs_reg::ADC_RESET, 0); + perif.misc_outs->set(radio_misc_outs_reg::DAC_RESET_N, 1); + perif.misc_outs->flush(); + } + perif.misc_outs->write(radio_misc_outs_reg::DAC_ENABLED, 1); this->register_loopback_self_test(perif.ctrl); @@ -883,31 +936,16 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name) perif.dac = x300_dac_ctrl::make(perif.spi, DB_DAC_SEN, mb.clock->get_master_clock_rate()); perif.leds = gpio_core_200_32wo::make(perif.ctrl, TOREG(SR_LEDS)); + //Capture delays are calibrated every time. The status is only printed is the user + //asks to run the xfer self cal using "self_cal_adc_delay" + self_cal_adc_capture_delay(mb, radio_index, dev_addr.has_key("self_cal_adc_delay")); + _tree->access<time_spec_t>(mb_path / "time" / "cmd") .subscribe(boost::bind(&radio_ctrl_core_3000::set_time, perif.ctrl, _1)); _tree->access<double>(mb_path / "tick_rate") .subscribe(boost::bind(&radio_ctrl_core_3000::set_tick_rate, perif.ctrl, _1)); //////////////////////////////////////////////////////////////// - // ADC self test - //////////////////////////////////////////////////////////////// - perif.adc->set_test_word("ones", "ones"); check_adc(perif.ctrl, 0xfffcfffc); - perif.adc->set_test_word("zeros", "zeros"); check_adc(perif.ctrl, 0x00000000); - perif.adc->set_test_word("ones", "zeros"); check_adc(perif.ctrl, 0xfffc0000); - perif.adc->set_test_word("zeros", "ones"); check_adc(perif.ctrl, 0x0000fffc); - for (size_t k = 0; k < 14; k++) - { - perif.adc->set_test_word("zeros", "custom", 1 << k); - check_adc(perif.ctrl, 1 << (k+2)); - } - for (size_t k = 0; k < 14; k++) - { - perif.adc->set_test_word("custom", "zeros", 1 << k); - check_adc(perif.ctrl, 1 << (k+18)); - } - perif.adc->set_test_word("normal", "normal"); - - //////////////////////////////////////////////////////////////// // create codec control objects //////////////////////////////////////////////////////////////// _tree->create<int>(mb_path / "rx_codecs" / slot_name / "gains"); //phony property so this dir exists @@ -1365,7 +1403,8 @@ void x300_impl::update_clock_source(mboard_members_t &mb, const std::string &sou //Optimize for the case when the current source is internal and we are trying //to set it to internal. This is the only case where we are guaranteed that //the clock has not gone away so we can skip setting the MUX and reseting the LMK. - if (not (mb.current_refclk_src == "internal" and source == "internal")) { + const bool reconfigure_clks = (mb.current_refclk_src != "internal") or (source != "internal"); + if (reconfigure_clks) { //Update the clock MUX on the motherboard to select the requested source mb.clock_control_regs_clock_source = 0; mb.clock_control_regs_tcxo_enb = 0; @@ -1394,10 +1433,10 @@ void x300_impl::update_clock_source(mboard_members_t &mb, const std::string &sou //The programming code in x300_clock_ctrl is not compatible with revs <= 4 and may //lead to locking issues. So, disable the ref-locked check for older (unsupported) boards. if (mb.hw_rev > 4) { - if (not wait_for_ref_locked(mb.zpu_ctrl, timeout)) { + if (not wait_for_clk_locked(mb.zpu_ctrl, ZPU_RB_CLK_STATUS_LMK_LOCK, timeout)) { //failed to lock on reference if (mb.initialization_done) { - throw uhd::runtime_error((boost::format("Reference Clock failed to lock to %s source.") % source).str()); + throw uhd::runtime_error((boost::format("Reference Clock PLL failed to lock to %s source.") % source).str()); } else { //TODO: Re-enable this warning when we figure out a reliable lock time //UHD_MSG(warning) << "Reference clock failed to lock to " + source + " during device initialization. " << @@ -1406,6 +1445,41 @@ void x300_impl::update_clock_source(mboard_members_t &mb, const std::string &sou } } + if (reconfigure_clks) { + //Reset the radio clock PLL in the FPGA + mb.zpu_ctrl->poke32(SR_ADDR(SET0_BASE, ZPU_SR_SW_RST), ZPU_SR_SW_RST_RADIO_CLK_PLL); + mb.zpu_ctrl->poke32(SR_ADDR(SET0_BASE, ZPU_SR_SW_RST), 0); + + //Wait for radio clock PLL to lock + if (not wait_for_clk_locked(mb.zpu_ctrl, ZPU_RB_CLK_STATUS_RADIO_CLK_LOCK, 0.01)) { + throw uhd::runtime_error((boost::format("Reference Clock PLL in FPGA failed to lock to %s source.") % source).str()); + } + + //Reset the IDELAYCTRL used to calibrate the data interface delays + mb.zpu_ctrl->poke32(SR_ADDR(SET0_BASE, ZPU_SR_SW_RST), ZPU_SR_SW_RST_ADC_IDELAYCTRL); + mb.zpu_ctrl->poke32(SR_ADDR(SET0_BASE, ZPU_SR_SW_RST), 0); + + //Wait for the ADC IDELAYCTRL to be ready + if (not wait_for_clk_locked(mb.zpu_ctrl, ZPU_RB_CLK_STATUS_IDELAYCTRL_LOCK, 0.01)) { + throw uhd::runtime_error((boost::format("ADC Calibration Clock in FPGA failed to lock to %s source.") % source).str()); + } + + // Reset ADCs and DACs + for (size_t r = 0; r < mboard_members_t::NUM_RADIOS; r++) { + radio_perifs_t &perif = mb.radio_perifs[r]; + if (perif.misc_outs && r==0) { //ADC/DAC reset lines only exist in Radio0 + perif.misc_outs->set(radio_misc_outs_reg::ADC_RESET, 1); + perif.misc_outs->set(radio_misc_outs_reg::DAC_RESET_N, 0); + perif.misc_outs->flush(); + perif.misc_outs->set(radio_misc_outs_reg::ADC_RESET, 0); + perif.misc_outs->set(radio_misc_outs_reg::DAC_RESET_N, 1); + perif.misc_outs->flush(); + } + if (perif.adc) perif.adc->reset(); + if (perif.dac) perif.dac->reset(); + } + } + //Update cache value mb.current_refclk_src = source; } @@ -1432,24 +1506,29 @@ void x300_impl::update_time_source(mboard_members_t &mb, const std::string &sour } } -bool x300_impl::wait_for_ref_locked(wb_iface::sptr ctrl, double timeout) +static bool get_clk_locked(wb_iface::sptr ctrl, boost::uint32_t which) +{ + return (ctrl->peek32(SR_ADDR(SET0_BASE, ZPU_RB_CLK_STATUS)) & which) != 0; +} + +bool x300_impl::wait_for_clk_locked(wb_iface::sptr ctrl, boost::uint32_t which, double timeout) { boost::system_time timeout_time = boost::get_system_time() + boost::posix_time::milliseconds(timeout * 1000.0); - do - { - if (get_ref_locked(ctrl).to_bool()) + do { + if (get_clk_locked(ctrl, which)) return true; boost::this_thread::sleep(boost::posix_time::milliseconds(1)); } while (boost::get_system_time() < timeout_time); - //failed to lock on reference - return false; + //Check one last time + return get_clk_locked(ctrl, which); } sensor_value_t x300_impl::get_ref_locked(wb_iface::sptr ctrl) { - boost::uint32_t clk_status = ctrl->peek32(SR_ADDR(SET0_BASE, ZPU_RB_CLK_STATUS)); - const bool lock = ((clk_status & ZPU_RB_CLK_STATUS_LMK_LOCK) != 0); + const bool lock = get_clk_locked(ctrl, ZPU_RB_CLK_STATUS_LMK_LOCK) && + get_clk_locked(ctrl, ZPU_RB_CLK_STATUS_RADIO_CLK_LOCK) && + get_clk_locked(ctrl, ZPU_RB_CLK_STATUS_IDELAYCTRL_LOCK); return sensor_value_t("Ref", lock, "locked", "unlocked"); } @@ -1469,63 +1548,6 @@ bool x300_impl::is_pps_present(wb_iface::sptr ctrl) } /*********************************************************************** - * reset and synchronization logic - **********************************************************************/ - -void x300_impl::reset_radios(mboard_members_t &mb) -{ - // Reset ADCs and DACs - BOOST_FOREACH (radio_perifs_t& perif, mb.radio_perifs) - { - perif.adc->reset(); - perif.dac->reset(); - } -} - -void x300_impl::synchronize_dacs(const std::vector<radio_perifs_t*>& radios) -{ - if (radios.size() < 2) return; //Nothing to synchronize - - //**PRECONDITION** - //This function assumes that all the VITA times in "radios" are synchronized - //to a common reference. Currently, this function is called in get_tx_stream - //which also has the same precondition. - - //Reinitialize and resync all DACs - for (size_t i = 0; i < radios.size(); i++) { - radios[i]->dac->reset_and_resync(); - } - - //Get a rough estimate of the cumulative command latency - boost::posix_time::ptime t_start = boost::posix_time::microsec_clock::local_time(); - for (size_t i = 0; i < radios.size(); i++) { - radios[i]->ctrl->peek64(RB64_TIME_NOW); //Discard value. We are just timing the call - } - boost::posix_time::time_duration t_elapsed = - boost::posix_time::microsec_clock::local_time() - t_start; - - //Add 100% of headroom + uncertaintly to the command time - boost::uint64_t t_sync_us = (t_elapsed.total_microseconds() * 2) + 13000 /*Scheduler latency*/; - - //Pick radios[0] as the time reference. - uhd::time_spec_t sync_time = - radios[0]->time64->get_time_now() + uhd::time_spec_t(((double)t_sync_us)/1e6); - - //Send the sync command - for (size_t i = 0; i < radios.size(); i++) { - radios[i]->ctrl->set_time(sync_time); - radios[i]->ctrl->poke32(TOREG(SR_DACSYNC), 0x1); //Arm FRAMEP/N sync pulse - radios[i]->ctrl->set_time(uhd::time_spec_t(0.0)); //Clear command time - } - - //Wait and check status - boost::this_thread::sleep(boost::posix_time::microseconds(t_sync_us)); - for (size_t i = 0; i < radios.size(); i++) { - radios[i]->dac->verify_sync(); - } -} - -/*********************************************************************** * eeprom **********************************************************************/ @@ -1544,20 +1566,24 @@ void x300_impl::set_mb_eeprom(i2c_iface::sptr i2c, const mboard_eeprom_t &mb_eep * front-panel GPIO **********************************************************************/ -boost::uint32_t x300_impl::get_fp_gpio(gpio_core_200::sptr gpio, const std::string &) +boost::uint32_t x300_impl::get_fp_gpio(gpio_core_200::sptr gpio) { return boost::uint32_t(gpio->read_gpio(dboard_iface::UNIT_RX)); } -void x300_impl::set_fp_gpio(gpio_core_200::sptr gpio, const std::string &attr, const boost::uint32_t value) +void x300_impl::set_fp_gpio(gpio_core_200::sptr gpio, const gpio_attr_t attr, const boost::uint32_t value) { - if (attr == "CTRL") return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value); - if (attr == "DDR") return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value); - if (attr == "OUT") return gpio->set_gpio_out(dboard_iface::UNIT_RX, value); - if (attr == "ATR_0X") return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value); - if (attr == "ATR_RX") return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value); - if (attr == "ATR_TX") return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value); - if (attr == "ATR_XX") return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value); + switch (attr) + { + case GPIO_CTRL: return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value); + case GPIO_DDR: return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value); + case GPIO_OUT: return gpio->set_gpio_out(dboard_iface::UNIT_RX, value); + case GPIO_ATR_0X: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value); + case GPIO_ATR_RX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value); + case GPIO_ATR_TX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value); + case GPIO_ATR_XX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value); + default: UHD_THROW_INVALID_CODE_PATH(); + } } /*********************************************************************** @@ -1688,25 +1714,33 @@ void x300_impl::check_fw_compat(const fs_path &mb_path, wb_iface::sptr iface) % compat_major % compat_minor)); } -void x300_impl::check_fpga_compat(const fs_path &mb_path, wb_iface::sptr iface) +void x300_impl::check_fpga_compat(const fs_path &mb_path, const mboard_members_t &members) { - boost::uint32_t compat_num = iface->peek32(SR_ADDR(SET0_BASE, ZPU_RB_COMPAT_NUM)); + boost::uint32_t compat_num = members.zpu_ctrl->peek32(SR_ADDR(SET0_BASE, ZPU_RB_COMPAT_NUM)); boost::uint32_t compat_major = (compat_num >> 16); boost::uint32_t compat_minor = (compat_num & 0xffff); if (compat_major != X300_FPGA_COMPAT_MAJOR) { + std::string image_loader_path = (fs::path(uhd::get_pkg_path()) / "bin" / "uhd_image_loader").string(); + std::string image_loader_cmd = str(boost::format("\"%s\" --args=\"type=x300,%s=%s\"") + % image_loader_path + % (members.xport_path == "eth" ? "addr" + : "resource") + % members.addr); + throw uhd::runtime_error(str(boost::format( "Expected FPGA compatibility number %d, but got %d:\n" "The FPGA image on your device is not compatible with this host code build.\n" "Download the appropriate FPGA images for this version of UHD.\n" "%s\n\n" "Then burn a new image to the on-board flash storage of your\n" - "USRP X3xx device using the burner utility. %s\n\n" + "USRP X3xx device using the image loader utility. Use this command:\n\n%s\n\n" "For more information, refer to the UHD manual:\n\n" " http://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_flash" ) % int(X300_FPGA_COMPAT_MAJOR) % compat_major - % print_utility_error("uhd_images_downloader.py") % print_utility_error("usrp_x3xx_fpga_burner"))); + % print_utility_error("uhd_images_downloader.py") + % image_loader_cmd)); } _tree->create<std::string>(mb_path / "fpga_version").set(str(boost::format("%u.%u") % compat_major % compat_minor)); @@ -1727,17 +1761,39 @@ x300_impl::x300_mboard_t x300_impl::get_mb_type_from_pcie(const std::string& res if (nirio_status_not_fatal(status)) { //The PCIe ID -> MB mapping may be different from the EEPROM -> MB mapping switch (pid) { - case X300_USRP_PCIE_SSID: + case X300_USRP_PCIE_SSID_ADC_33: + case X300_USRP_PCIE_SSID_ADC_18: mb_type = USRP_X300_MB; break; - case X310_USRP_PCIE_SSID: - case X310_2940R_PCIE_SSID: - case X310_2942R_PCIE_SSID: - case X310_2943R_PCIE_SSID: - case X310_2944R_PCIE_SSID: - case X310_2950R_PCIE_SSID: - case X310_2952R_PCIE_SSID: - case X310_2953R_PCIE_SSID: - case X310_2954R_PCIE_SSID: + case X310_USRP_PCIE_SSID_ADC_33: + case X310_2940R_40MHz_PCIE_SSID_ADC_33: + case X310_2940R_120MHz_PCIE_SSID_ADC_33: + case X310_2942R_40MHz_PCIE_SSID_ADC_33: + case X310_2942R_120MHz_PCIE_SSID_ADC_33: + case X310_2943R_40MHz_PCIE_SSID_ADC_33: + case X310_2943R_120MHz_PCIE_SSID_ADC_33: + case X310_2944R_40MHz_PCIE_SSID_ADC_33: + case X310_2950R_40MHz_PCIE_SSID_ADC_33: + case X310_2950R_120MHz_PCIE_SSID_ADC_33: + case X310_2952R_40MHz_PCIE_SSID_ADC_33: + case X310_2952R_120MHz_PCIE_SSID_ADC_33: + case X310_2953R_40MHz_PCIE_SSID_ADC_33: + case X310_2953R_120MHz_PCIE_SSID_ADC_33: + case X310_2954R_40MHz_PCIE_SSID_ADC_33: + case X310_USRP_PCIE_SSID_ADC_18: + case X310_2940R_40MHz_PCIE_SSID_ADC_18: + case X310_2940R_120MHz_PCIE_SSID_ADC_18: + case X310_2942R_40MHz_PCIE_SSID_ADC_18: + case X310_2942R_120MHz_PCIE_SSID_ADC_18: + case X310_2943R_40MHz_PCIE_SSID_ADC_18: + case X310_2943R_120MHz_PCIE_SSID_ADC_18: + case X310_2944R_40MHz_PCIE_SSID_ADC_18: + case X310_2950R_40MHz_PCIE_SSID_ADC_18: + case X310_2950R_120MHz_PCIE_SSID_ADC_18: + case X310_2952R_40MHz_PCIE_SSID_ADC_18: + case X310_2952R_120MHz_PCIE_SSID_ADC_18: + case X310_2953R_40MHz_PCIE_SSID_ADC_18: + case X310_2953R_120MHz_PCIE_SSID_ADC_18: + case X310_2954R_40MHz_PCIE_SSID_ADC_18: mb_type = USRP_X310_MB; break; default: mb_type = UNKNOWN; break; @@ -1762,17 +1818,39 @@ x300_impl::x300_mboard_t x300_impl::get_mb_type_from_eeprom(const uhd::usrp::mbo switch (product_num) { //The PCIe ID -> MB mapping may be different from the EEPROM -> MB mapping - case X300_USRP_PCIE_SSID: + case X300_USRP_PCIE_SSID_ADC_33: + case X300_USRP_PCIE_SSID_ADC_18: mb_type = USRP_X300_MB; break; - case X310_USRP_PCIE_SSID: - case X310_2940R_PCIE_SSID: - case X310_2942R_PCIE_SSID: - case X310_2943R_PCIE_SSID: - case X310_2944R_PCIE_SSID: - case X310_2950R_PCIE_SSID: - case X310_2952R_PCIE_SSID: - case X310_2953R_PCIE_SSID: - case X310_2954R_PCIE_SSID: + case X310_USRP_PCIE_SSID_ADC_33: + case X310_2940R_40MHz_PCIE_SSID_ADC_33: + case X310_2940R_120MHz_PCIE_SSID_ADC_33: + case X310_2942R_40MHz_PCIE_SSID_ADC_33: + case X310_2942R_120MHz_PCIE_SSID_ADC_33: + case X310_2943R_40MHz_PCIE_SSID_ADC_33: + case X310_2943R_120MHz_PCIE_SSID_ADC_33: + case X310_2944R_40MHz_PCIE_SSID_ADC_33: + case X310_2950R_40MHz_PCIE_SSID_ADC_33: + case X310_2950R_120MHz_PCIE_SSID_ADC_33: + case X310_2952R_40MHz_PCIE_SSID_ADC_33: + case X310_2952R_120MHz_PCIE_SSID_ADC_33: + case X310_2953R_40MHz_PCIE_SSID_ADC_33: + case X310_2953R_120MHz_PCIE_SSID_ADC_33: + case X310_2954R_40MHz_PCIE_SSID_ADC_33: + case X310_USRP_PCIE_SSID_ADC_18: + case X310_2940R_40MHz_PCIE_SSID_ADC_18: + case X310_2940R_120MHz_PCIE_SSID_ADC_18: + case X310_2942R_40MHz_PCIE_SSID_ADC_18: + case X310_2942R_120MHz_PCIE_SSID_ADC_18: + case X310_2943R_40MHz_PCIE_SSID_ADC_18: + case X310_2943R_120MHz_PCIE_SSID_ADC_18: + case X310_2944R_40MHz_PCIE_SSID_ADC_18: + case X310_2950R_40MHz_PCIE_SSID_ADC_18: + case X310_2950R_120MHz_PCIE_SSID_ADC_18: + case X310_2952R_40MHz_PCIE_SSID_ADC_18: + case X310_2952R_120MHz_PCIE_SSID_ADC_18: + case X310_2953R_40MHz_PCIE_SSID_ADC_18: + case X310_2953R_120MHz_PCIE_SSID_ADC_18: + case X310_2954R_40MHz_PCIE_SSID_ADC_18: mb_type = USRP_X310_MB; break; default: UHD_MSG(warning) << "X300 unknown product code in EEPROM: " << product_num << std::endl; @@ -1781,4 +1859,3 @@ x300_impl::x300_mboard_t x300_impl::get_mb_type_from_eeprom(const uhd::usrp::mbo } return mb_type; } - diff --git a/host/lib/usrp/x300/x300_impl.hpp b/host/lib/usrp/x300/x300_impl.hpp index 890ef7bcb..20cd4d754 100644 --- a/host/lib/usrp/x300/x300_impl.hpp +++ b/host/lib/usrp/x300/x300_impl.hpp @@ -1,5 +1,5 @@ // -// Copyright 2013-2014 Ettus Research LLC +// Copyright 2013-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -49,6 +49,8 @@ #include <uhd/transport/nirio/niusrprio_session.h> #include <uhd/transport/vrt_if_packet.hpp> #include "recv_packet_demuxer_3000.hpp" +#include <uhd/utils/soft_register.hpp> +#include "x300_regs.hpp" static const std::string X300_FW_FILE_NAME = "usrp_x300_fw.bin"; @@ -140,6 +142,8 @@ uhd::uart_iface::sptr x300_make_uart_iface(uhd::wb_iface::sptr iface); uhd::wb_iface::sptr x300_make_ctrl_iface_enet(uhd::transport::udp_simple::sptr udp); uhd::wb_iface::sptr x300_make_ctrl_iface_pcie(uhd::niusrprio::niriok_proxy::sptr drv_proxy); +uhd::device_addrs_t x300_find(const uhd::device_addr_t &hint_); + class x300_impl : public uhd::device { public: @@ -169,9 +173,43 @@ public: private: boost::shared_ptr<async_md_type> _async_md; + class radio_misc_outs_reg : public uhd::soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(DAC_ENABLED, /*width*/ 1, /*shift*/ 0); //[0] + UHD_DEFINE_SOFT_REG_FIELD(DAC_RESET_N, /*width*/ 1, /*shift*/ 1); //[1] + UHD_DEFINE_SOFT_REG_FIELD(ADC_RESET, /*width*/ 1, /*shift*/ 2); //[2] + UHD_DEFINE_SOFT_REG_FIELD(ADC_DATA_DLY_STB, /*width*/ 1, /*shift*/ 3); //[3] + UHD_DEFINE_SOFT_REG_FIELD(ADC_DATA_DLY_VAL, /*width*/ 5, /*shift*/ 4); //[8:4] + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER_ENABLED, /*width*/ 1, /*shift*/ 9); //[9] + + radio_misc_outs_reg(): uhd::soft_reg32_wo_t(TOREG(SR_MISC_OUTS)) { + //Initial values + set(DAC_ENABLED, 0); + set(DAC_RESET_N, 0); + set(ADC_RESET, 0); + set(ADC_DATA_DLY_STB, 0); + set(ADC_DATA_DLY_VAL, 16); + set(ADC_CHECKER_ENABLED, 0); + } + }; + class radio_misc_ins_reg : public uhd::soft_reg32_ro_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER0_Q_LOCKED, /*width*/ 1, /*shift*/ 0); //[0] + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER0_I_LOCKED, /*width*/ 1, /*shift*/ 1); //[1] + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER1_Q_LOCKED, /*width*/ 1, /*shift*/ 2); //[2] + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER1_I_LOCKED, /*width*/ 1, /*shift*/ 3); //[3] + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER0_Q_ERROR, /*width*/ 1, /*shift*/ 4); //[4] + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER0_I_ERROR, /*width*/ 1, /*shift*/ 5); //[5] + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER1_Q_ERROR, /*width*/ 1, /*shift*/ 6); //[6] + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER1_I_ERROR, /*width*/ 1, /*shift*/ 7); //[7] + + radio_misc_ins_reg(): uhd::soft_reg32_ro_t(RB32_MISC_INS) { } + }; + //perifs in the radio core struct radio_perifs_t { + //Interfaces radio_ctrl_core_3000::sptr ctrl; spi_core_3000::sptr spi; x300_adc_ctrl::sptr adc; @@ -184,6 +222,9 @@ private: gpio_core_200_32wo::sptr leds; rx_frontend_core_200::sptr rx_fe; tx_frontend_core_200::sptr tx_fe; + //Registers + radio_misc_outs_reg::sptr misc_outs; + radio_misc_ins_reg::sptr misc_ins; }; //overflow recovery impl @@ -211,7 +252,8 @@ private: i2c_core_100_wb32::sptr zpu_i2c; //perifs in each radio - radio_perifs_t radio_perifs[2]; //!< This is hardcoded s.t. radio_perifs[0] points to slot A and [1] to B + static const size_t NUM_RADIOS = 2; + radio_perifs_t radio_perifs[NUM_RADIOS]; //!< This is hardcoded s.t. radio_perifs[0] points to slot A and [1] to B uhd::usrp::dboard_eeprom_t db_eeproms[8]; //! Return the index of a radio component, given a slot name. This means DSPs, radio_perifs size_t get_radio_index(const std::string &slot_name) { @@ -259,7 +301,7 @@ private: * \param mb_i Motherboard index * \param slot_name Slot name (A or B). */ - void setup_radio(const size_t, const std::string &slot_name); + void setup_radio(const size_t, const std::string &slot_name, const uhd::device_addr_t &dev_addr); size_t _sid_framer; struct sid_config_t @@ -348,21 +390,26 @@ private: void set_time_source_out(mboard_members_t&, const bool); void update_clock_source(mboard_members_t&, const std::string &); void update_time_source(mboard_members_t&, const std::string &); - void reset_radios(mboard_members_t&); uhd::sensor_value_t get_ref_locked(uhd::wb_iface::sptr); - bool wait_for_ref_locked(uhd::wb_iface::sptr, double timeout = 0.0); + bool wait_for_clk_locked(uhd::wb_iface::sptr, boost::uint32_t which, double timeout); bool is_pps_present(uhd::wb_iface::sptr); void set_db_eeprom(uhd::i2c_iface::sptr i2c, const size_t, const uhd::usrp::dboard_eeprom_t &); void set_mb_eeprom(uhd::i2c_iface::sptr i2c, const uhd::usrp::mboard_eeprom_t &); void check_fw_compat(const uhd::fs_path &mb_path, uhd::wb_iface::sptr iface); - void check_fpga_compat(const uhd::fs_path &mb_path, uhd::wb_iface::sptr iface); + void check_fpga_compat(const uhd::fs_path &mb_path, const mboard_members_t &members); void update_atr_leds(gpio_core_200_32wo::sptr, const std::string &ant); - boost::uint32_t get_fp_gpio(gpio_core_200::sptr, const std::string &); - void set_fp_gpio(gpio_core_200::sptr, const std::string &, const boost::uint32_t); + boost::uint32_t get_fp_gpio(gpio_core_200::sptr); + void set_fp_gpio(gpio_core_200::sptr, const gpio_attr_t, const boost::uint32_t); + + void self_cal_adc_capture_delay(mboard_members_t& mb, const size_t radio_i, bool print_status = false); + double self_cal_adc_xfer_delay(mboard_members_t& mb, bool apply_delay = false); + void self_test_adcs(mboard_members_t& mb, boost::uint32_t ramp_time_ms = 100); + + void extended_adc_test(mboard_members_t& mb, double duration_s); //**PRECONDITION** //This function assumes that all the VITA times in "radios" are synchronized diff --git a/host/lib/usrp/x300/x300_io_impl.cpp b/host/lib/usrp/x300/x300_io_impl.cpp index 334ae8168..e3515af0c 100644 --- a/host/lib/usrp/x300/x300_io_impl.cpp +++ b/host/lib/usrp/x300/x300_io_impl.cpp @@ -23,6 +23,7 @@ #include <uhd/transport/nirio_zero_copy.hpp> #include "async_packet_handler.hpp" #include <uhd/transport/bounded_buffer.hpp> +#include <uhd/transport/chdr.hpp> #include <boost/bind.hpp> #include <uhd/utils/tasks.hpp> #include <uhd/utils/log.hpp> @@ -124,41 +125,6 @@ void x300_impl::update_subdev_spec(const std::string &tx_rx, const size_t mb_i, /*********************************************************************** - * VITA stuff - **********************************************************************/ -static void x300_if_hdr_unpack_be( - const boost::uint32_t *packet_buff, - vrt::if_packet_info_t &if_packet_info -){ - if_packet_info.link_type = vrt::if_packet_info_t::LINK_TYPE_CHDR; - return vrt::if_hdr_unpack_be(packet_buff, if_packet_info); -} - -static void x300_if_hdr_pack_be( - boost::uint32_t *packet_buff, - vrt::if_packet_info_t &if_packet_info -){ - if_packet_info.link_type = vrt::if_packet_info_t::LINK_TYPE_CHDR; - return vrt::if_hdr_pack_be(packet_buff, if_packet_info); -} - -static void x300_if_hdr_unpack_le( - const boost::uint32_t *packet_buff, - vrt::if_packet_info_t &if_packet_info -){ - if_packet_info.link_type = vrt::if_packet_info_t::LINK_TYPE_CHDR; - return vrt::if_hdr_unpack_le(packet_buff, if_packet_info); -} - -static void x300_if_hdr_pack_le( - boost::uint32_t *packet_buff, - vrt::if_packet_info_t &if_packet_info -){ - if_packet_info.link_type = vrt::if_packet_info_t::LINK_TYPE_CHDR; - return vrt::if_hdr_pack_le(packet_buff, if_packet_info); -} - -/*********************************************************************** * RX flow control handler **********************************************************************/ static size_t get_rx_flow_control_window(size_t frame_size, size_t sw_buff_size, const device_addr_t& rx_args) @@ -209,9 +175,9 @@ static void handle_rx_flowctrl(const boost::uint32_t sid, zero_copy_if::sptr xpo //load header if (big_endian) - x300_if_hdr_pack_be(pkt, packet_info); + vrt::chdr::if_hdr_pack_be(pkt, packet_info); else - x300_if_hdr_pack_le(pkt, packet_info); + vrt::chdr::if_hdr_pack_le(pkt, packet_info); //load payload pkt[packet_info.num_header_words32+0] = uhd::htonx<boost::uint32_t>(0); @@ -276,12 +242,12 @@ static void handle_tx_async_msgs(boost::shared_ptr<x300_tx_fc_guts_t> guts, zero { if (big_endian) { - x300_if_hdr_unpack_be(packet_buff, if_packet_info); + vrt::chdr::if_hdr_unpack_be(packet_buff, if_packet_info); endian_conv = uhd::ntohx; } else { - x300_if_hdr_unpack_le(packet_buff, if_packet_info); + vrt::chdr::if_hdr_unpack_le(packet_buff, if_packet_info); endian_conv = uhd::wtohx; } } @@ -430,10 +396,10 @@ rx_streamer::sptr x300_impl::get_rx_stream(const uhd::stream_args_t &args_) //init some streamer stuff std::string conv_endianness; if (mb.if_pkt_is_big_endian) { - my_streamer->set_vrt_unpacker(&x300_if_hdr_unpack_be); + my_streamer->set_vrt_unpacker(&vrt::chdr::if_hdr_unpack_be); conv_endianness = "be"; } else { - my_streamer->set_vrt_unpacker(&x300_if_hdr_unpack_le); + my_streamer->set_vrt_unpacker(&vrt::chdr::if_hdr_unpack_le); conv_endianness = "le"; } @@ -594,10 +560,10 @@ tx_streamer::sptr x300_impl::get_tx_stream(const uhd::stream_args_t &args_) std::string conv_endianness; if (mb.if_pkt_is_big_endian) { - my_streamer->set_vrt_packer(&x300_if_hdr_pack_be); + my_streamer->set_vrt_packer(&vrt::chdr::if_hdr_pack_be); conv_endianness = "be"; } else { - my_streamer->set_vrt_packer(&x300_if_hdr_pack_le); + my_streamer->set_vrt_packer(&vrt::chdr::if_hdr_pack_le); conv_endianness = "le"; } diff --git a/host/lib/usrp/x300/x300_regs.hpp b/host/lib/usrp/x300/x300_regs.hpp index f920b5ae2..6e92a6dbc 100644 --- a/host/lib/usrp/x300/x300_regs.hpp +++ b/host/lib/usrp/x300/x300_regs.hpp @@ -25,101 +25,134 @@ #define localparam static const int -localparam SR_DACSYNC = 5; -localparam SR_LOOPBACK = 6; -localparam SR_TEST = 7; -localparam SR_SPI = 8; -localparam SR_GPIO = 16; -localparam SR_MISC_OUTS = 24; -localparam SR_READBACK = 32; -localparam SR_TX_CTRL = 64; -localparam SR_RX_CTRL = 96; -localparam SR_TIME = 128; -localparam SR_RX_DSP = 144; -localparam SR_TX_DSP = 184; -localparam SR_LEDS = 195; -localparam SR_FP_GPIO = 200; -localparam SR_RX_FRONT = 208; -localparam SR_TX_FRONT = 216; - -localparam RB32_GPIO = 0; -localparam RB32_SPI = 4; -localparam RB64_TIME_NOW = 8; -localparam RB64_TIME_PPS = 16; -localparam RB32_TEST = 24; -localparam RB32_RX = 28; -localparam RB32_FP_GPIO = 32; - -localparam BL_ADDRESS = 0; -localparam BL_DATA = 1; +localparam SR_DACSYNC = 5; +localparam SR_LOOPBACK = 6; +localparam SR_TEST = 7; +localparam SR_SPI = 8; +localparam SR_GPIO = 16; +localparam SR_MISC_OUTS = 24; +localparam SR_READBACK = 32; +localparam SR_TX_CTRL = 64; +localparam SR_RX_CTRL = 96; +localparam SR_TIME = 128; +localparam SR_RX_DSP = 144; +localparam SR_TX_DSP = 184; +localparam SR_LEDS = 195; +localparam SR_FP_GPIO = 200; +localparam SR_RX_FRONT = 208; +localparam SR_TX_FRONT = 216; + +localparam RB32_GPIO = 0; +localparam RB32_SPI = 4; +localparam RB64_TIME_NOW = 8; +localparam RB64_TIME_PPS = 16; +localparam RB32_TEST = 24; +localparam RB32_RX = 28; +localparam RB32_FP_GPIO = 32; +localparam RB32_MISC_INS = 36; + +localparam BL_ADDRESS = 0; +localparam BL_DATA = 1; //wishbone settings map - relevant to host code -#define SET0_BASE 0xa000 -#define SETXB_BASE 0xb000 -#define BOOT_LDR_BASE 0xFA00 -#define I2C0_BASE 0xfe00 -#define I2C1_BASE 0xff00 +#define SET0_BASE 0xa000 +#define SETXB_BASE 0xb000 +#define BOOT_LDR_BASE 0xfa00 +#define I2C0_BASE 0xfe00 +#define I2C1_BASE 0xff00 #define SR_ADDR(base, offset) ((base) + (offset)*4) localparam ZPU_SR_LEDS = 00; -localparam ZPU_SR_PHY_RST = 01; +localparam ZPU_SR_SW_RST = 01; localparam ZPU_SR_CLOCK_CTRL = 02; localparam ZPU_SR_XB_LOCAL = 03; localparam ZPU_SR_SPI = 32; localparam ZPU_SR_ETHINT0 = 40; localparam ZPU_SR_ETHINT1 = 56; +//reset bits +#define ZPU_SR_SW_RST_ETH_PHY (1<<0) +#define ZPU_SR_SW_RST_RADIO_RST (1<<1) +#define ZPU_SR_SW_RST_RADIO_CLK_PLL (1<<2) +#define ZPU_SR_SW_RST_ADC_IDELAYCTRL (1<<3) + //clock controls -#define ZPU_SR_CLOCK_CTRL_CLK_SRC_EXTERNAL 0x00 -#define ZPU_SR_CLOCK_CTRL_CLK_SRC_INTERNAL 0x02 -#define ZPU_SR_CLOCK_CTRL_CLK_SRC_GPSDO 0x03 -#define ZPU_SR_CLOCK_CTRL_PPS_SRC_EXTERNAL 0x00 -#define ZPU_SR_CLOCK_CTRL_PPS_SRC_INTERNAL 0x02 -#define ZPU_SR_CLOCK_CTRL_PPS_SRC_GPSDO 0x03 - -localparam ZPU_RB_SPI = 2; +#define ZPU_SR_CLOCK_CTRL_CLK_SRC_EXTERNAL 0x00 +#define ZPU_SR_CLOCK_CTRL_CLK_SRC_INTERNAL 0x02 +#define ZPU_SR_CLOCK_CTRL_CLK_SRC_GPSDO 0x03 +#define ZPU_SR_CLOCK_CTRL_PPS_SRC_EXTERNAL 0x00 +#define ZPU_SR_CLOCK_CTRL_PPS_SRC_INTERNAL 0x02 +#define ZPU_SR_CLOCK_CTRL_PPS_SRC_GPSDO 0x03 + +localparam ZPU_RB_SPI = 2; localparam ZPU_RB_CLK_STATUS = 3; localparam ZPU_RB_COMPAT_NUM = 6; localparam ZPU_RB_ETH_TYPE0 = 4; localparam ZPU_RB_ETH_TYPE1 = 5; //clock status -#define ZPU_RB_CLK_STATUS_LMK_STATUS (0x3 << 0) -#define ZPU_RB_CLK_STATUS_LMK_LOCK (0x1 << 2) -#define ZPU_RB_CLK_STATUS_LMK_HOLDOVER (0x1 << 3) -#define ZPU_RB_CLK_STATUS_PPS_DETECT (0x1 << 4) +#define ZPU_RB_CLK_STATUS_LMK_STATUS (0x3 << 0) +#define ZPU_RB_CLK_STATUS_LMK_LOCK (0x1 << 2) +#define ZPU_RB_CLK_STATUS_LMK_HOLDOVER (0x1 << 3) +#define ZPU_RB_CLK_STATUS_PPS_DETECT (0x1 << 4) +#define ZPU_RB_CLK_STATUS_RADIO_CLK_LOCK (0x1 << 5) +#define ZPU_RB_CLK_STATUS_IDELAYCTRL_LOCK (0x1 << 6) //spi slaves on radio -#define DB_DAC_SEN (1 << 7) -#define DB_ADC_SEN (1 << 6) +#define DB_DAC_SEN (1 << 7) +#define DB_ADC_SEN (1 << 6) #define DB_RX_LSADC_SEN (1 << 5) #define DB_RX_LSDAC_SEN (1 << 4) #define DB_TX_LSADC_SEN (1 << 3) #define DB_TX_LSDAC_SEN (1 << 2) -#define DB_RX_SEN (1 << 1) -#define DB_TX_SEN (1 << 0) +#define DB_RX_SEN (1 << 1) +#define DB_TX_SEN (1 << 0) //------------------------------------------------------------------- // PCIe Registers //------------------------------------------------------------------- -static const uint32_t X300_PCIE_VID = 0x1093; -static const uint32_t X300_PCIE_PID = 0xC4C4; -static const uint32_t X300_USRP_PCIE_SSID = 0x7736; -static const uint32_t X310_USRP_PCIE_SSID = 0x76CA; -static const uint32_t X310_2940R_PCIE_SSID = 0x772B; -static const uint32_t X310_2942R_PCIE_SSID = 0x772C; -static const uint32_t X310_2943R_PCIE_SSID = 0x772D; -static const uint32_t X310_2944R_PCIE_SSID = 0x772E; -static const uint32_t X310_2950R_PCIE_SSID = 0x772F; -static const uint32_t X310_2952R_PCIE_SSID = 0x7730; -static const uint32_t X310_2953R_PCIE_SSID = 0x7731; -static const uint32_t X310_2954R_PCIE_SSID = 0x7732; +static const uint32_t X300_PCIE_VID = 0x1093; +static const uint32_t X300_PCIE_PID = 0xC4C4; +//Rev 0-6 motherboard/PCIe IDs (ADC driven at 3.3V) +static const uint32_t X300_USRP_PCIE_SSID_ADC_33 = 0x7736; +static const uint32_t X310_USRP_PCIE_SSID_ADC_33 = 0x76CA; +static const uint32_t X310_2940R_40MHz_PCIE_SSID_ADC_33 = 0x772B; +static const uint32_t X310_2940R_120MHz_PCIE_SSID_ADC_33 = 0x77FB; +static const uint32_t X310_2942R_40MHz_PCIE_SSID_ADC_33 = 0x772C; +static const uint32_t X310_2942R_120MHz_PCIE_SSID_ADC_33 = 0x77FC; +static const uint32_t X310_2943R_40MHz_PCIE_SSID_ADC_33 = 0x772D; +static const uint32_t X310_2943R_120MHz_PCIE_SSID_ADC_33 = 0x77FD; +static const uint32_t X310_2944R_40MHz_PCIE_SSID_ADC_33 = 0x772E; +static const uint32_t X310_2950R_40MHz_PCIE_SSID_ADC_33 = 0x772F; +static const uint32_t X310_2950R_120MHz_PCIE_SSID_ADC_33 = 0x77FE; +static const uint32_t X310_2952R_40MHz_PCIE_SSID_ADC_33 = 0x7730; +static const uint32_t X310_2952R_120MHz_PCIE_SSID_ADC_33 = 0x77FF; +static const uint32_t X310_2953R_40MHz_PCIE_SSID_ADC_33 = 0x7731; +static const uint32_t X310_2953R_120MHz_PCIE_SSID_ADC_33 = 0x7800; +static const uint32_t X310_2954R_40MHz_PCIE_SSID_ADC_33 = 0x7732; +//Rev 7+ motherboard/PCIe IDs (ADCs driven at 1.8V) +static const uint32_t X300_USRP_PCIE_SSID_ADC_18 = 0x7861; +static const uint32_t X310_USRP_PCIE_SSID_ADC_18 = 0x7862; +static const uint32_t X310_2940R_40MHz_PCIE_SSID_ADC_18 = 0x7853; +static const uint32_t X310_2940R_120MHz_PCIE_SSID_ADC_18 = 0x785B; +static const uint32_t X310_2942R_40MHz_PCIE_SSID_ADC_18 = 0x7854; +static const uint32_t X310_2942R_120MHz_PCIE_SSID_ADC_18 = 0x785C; +static const uint32_t X310_2943R_40MHz_PCIE_SSID_ADC_18 = 0x7855; +static const uint32_t X310_2943R_120MHz_PCIE_SSID_ADC_18 = 0x785D; +static const uint32_t X310_2944R_40MHz_PCIE_SSID_ADC_18 = 0x7856; +static const uint32_t X310_2950R_40MHz_PCIE_SSID_ADC_18 = 0x7857; +static const uint32_t X310_2950R_120MHz_PCIE_SSID_ADC_18 = 0x785E; +static const uint32_t X310_2952R_40MHz_PCIE_SSID_ADC_18 = 0x7858; +static const uint32_t X310_2952R_120MHz_PCIE_SSID_ADC_18 = 0x785F; +static const uint32_t X310_2953R_40MHz_PCIE_SSID_ADC_18 = 0x7859; +static const uint32_t X310_2953R_120MHz_PCIE_SSID_ADC_18 = 0x7860; +static const uint32_t X310_2954R_40MHz_PCIE_SSID_ADC_18 = 0x785A; static const uint32_t FPGA_X3xx_SIG_VALUE = 0x58333030; static const uint32_t PCIE_FPGA_ADDR_BASE = 0xC0000; -#define PCIE_FPGA_REG(X) (PCIE_FPGA_ADDR_BASE + X) +#define PCIE_FPGA_REG(X) (PCIE_FPGA_ADDR_BASE + (X)) static const uint32_t FPGA_PCIE_SIG_REG = PCIE_FPGA_REG(0x0000); static const uint32_t FPGA_CNTR_LO_REG = PCIE_FPGA_REG(0x0004); @@ -140,8 +173,8 @@ static const uint32_t DMA_FRAME_SIZE_REG = 0x4; static const uint32_t DMA_SAMPLE_COUNT_REG = 0x8; static const uint32_t DMA_PKT_COUNT_REG = 0xC; -#define PCIE_TX_DMA_REG(REG, CHAN) (PCIE_TX_DMA_REG_BASE + (CHAN*DMA_REG_GRP_SIZE) + REG) -#define PCIE_RX_DMA_REG(REG, CHAN) (PCIE_RX_DMA_REG_BASE + (CHAN*DMA_REG_GRP_SIZE) + REG) +#define PCIE_TX_DMA_REG(REG, CHAN) (PCIE_TX_DMA_REG_BASE + ((CHAN)*DMA_REG_GRP_SIZE) + (REG)) +#define PCIE_RX_DMA_REG(REG, CHAN) (PCIE_RX_DMA_REG_BASE + ((CHAN)*DMA_REG_GRP_SIZE) + (REG)) static const uint32_t DMA_CTRL_DISABLED = 0x00000000; static const uint32_t DMA_CTRL_ENABLED = 0x00000002; @@ -154,15 +187,15 @@ static const uint32_t DMA_STATUS_ERROR = 0x00000001; static const uint32_t DMA_STATUS_BUSY = 0x00000002; static const uint32_t PCIE_ROUTER_REG_BASE = PCIE_FPGA_REG(0x0500); -#define PCIE_ROUTER_REG(X) (PCIE_ROUTER_REG_BASE + X) +#define PCIE_ROUTER_REG(X) (PCIE_ROUTER_REG_BASE + (X)) static const uint32_t PCIE_ZPU_DATA_BASE = 0x30000; static const uint32_t PCIE_ZPU_READ_BASE = 0x20000; //Trig and Status share the same base static const uint32_t PCIE_ZPU_STATUS_BASE = 0x20000; -#define PCIE_ZPU_DATA_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_DATA_BASE) + X) -#define PCIE_ZPU_READ_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_READ_BASE) + X) -#define PCIE_ZPU_STATUS_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_STATUS_BASE) + X) +#define PCIE_ZPU_DATA_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_DATA_BASE) + (X)) +#define PCIE_ZPU_READ_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_READ_BASE) + (X)) +#define PCIE_ZPU_STATUS_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_STATUS_BASE) + (X)) static const uint32_t PCIE_ZPU_READ_START = 0x0; static const uint32_t PCIE_ZPU_READ_CLOBBER = 0x80000000; diff --git a/host/lib/usrp_clock/octoclock/CMakeLists.txt b/host/lib/usrp_clock/octoclock/CMakeLists.txt index e363bb9da..c489657e2 100644 --- a/host/lib/usrp_clock/octoclock/CMakeLists.txt +++ b/host/lib/usrp_clock/octoclock/CMakeLists.txt @@ -1,5 +1,5 @@ # -# Copyright 2011-2014 Ettus Research LLC +# Copyright 2013-2015 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -16,17 +16,15 @@ # ######################################################################## -# This file included, use CMake directory variables -######################################################################## - -######################################################################## # Conditionally configure the OctoClock support ######################################################################## LIBUHD_REGISTER_COMPONENT("OctoClock" ENABLE_OCTOCLOCK ON "ENABLE_LIBUHD" OFF) IF(ENABLE_OCTOCLOCK) LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/ihexcvt.cpp ${CMAKE_CURRENT_SOURCE_DIR}/octoclock_eeprom.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/octoclock_image_loader.cpp ${CMAKE_CURRENT_SOURCE_DIR}/octoclock_impl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/octoclock_uart.cpp ) diff --git a/host/lib/usrp_clock/octoclock/common.h b/host/lib/usrp_clock/octoclock/common.h index 96acbb30f..5861bc4b1 100644 --- a/host/lib/usrp_clock/octoclock/common.h +++ b/host/lib/usrp_clock/octoclock/common.h @@ -1,5 +1,5 @@ /* - * Copyright 2014 Ettus Research LLC + * Copyright 2014-2015 Ettus Research LLC * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -42,11 +42,11 @@ extern "C" { * only valid C code should go in this section. */ -//These values are placed in the octoclock_packet_t.proto_ver field +// These values are placed in the octoclock_packet_t.proto_ver field #define OCTOCLOCK_BOOTLOADER_PROTO_VER 1234 -#define OCTOCLOCK_FW_COMPAT_NUM 2 +#define OCTOCLOCK_FW_COMPAT_NUM 3 -//UDP ports assigned for different tasks +// UDP ports assigned for different tasks #define OCTOCLOCK_UDP_CTRL_PORT 50000 #define OCTOCLOCK_UDP_GPSDO_PORT 50001 #define OCTOCLOCK_UDP_FW_PORT 50002 @@ -98,11 +98,21 @@ typedef enum { } ref_t; typedef enum { - UP, - DOWN + PREFER_INTERNAL, + PREFER_EXTERNAL } switch_pos_t; +/* + * Some versions of AVR-GCC ignore #pragma pack, so + * if AVR-GCC is being used, use __attribute__ + * instead. + */ +#ifdef AVR +#define __AVR_ALIGNED__ __attribute__((aligned(1))) +#else +#define __AVR_ALIGNED__ #pragma pack(push,1) +#endif // Structure of values in EEPROM, starting in location 0 typedef struct { @@ -113,34 +123,37 @@ typedef struct { uint8_t serial[10]; uint8_t name[10]; uint8_t revision; -} octoclock_fw_eeprom_t; +} octoclock_fw_eeprom_t __AVR_ALIGNED__; typedef struct { uint8_t external_detected; uint8_t gps_detected; uint8_t which_ref; uint8_t switch_pos; -} octoclock_state_t; +} octoclock_state_t __AVR_ALIGNED__; typedef struct { uint8_t num_wraps; uint8_t pos; -} gpsdo_cache_state_t; +} gpsdo_cache_state_t __AVR_ALIGNED__; typedef struct { uint32_t proto_ver; uint32_t sequence; uint8_t code; union { - uint16_t len; + uint16_t crc; gpsdo_cache_state_t state; uint16_t poolsize; uint16_t addr; }; uint8_t data[256]; -} octoclock_packet_t; + uint16_t len; +} octoclock_packet_t __AVR_ALIGNED__; +#ifndef AVR #pragma pack(pop) +#endif #ifdef __cplusplus } diff --git a/host/lib/usrp_clock/octoclock/ihexcvt.cpp b/host/lib/usrp_clock/octoclock/ihexcvt.cpp new file mode 100644 index 000000000..0605ee61c --- /dev/null +++ b/host/lib/usrp_clock/octoclock/ihexcvt.cpp @@ -0,0 +1,250 @@ +/* IHexCvt - Intel HEX File <=> Binary Converter (C++) + Copyright (C) 2014 Ali Nakisaee + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + + +You should have received a copy of the GNU General Public License along +with this program; if not, write to the Free Software Foundation, Inc., +51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.*/ + +//Include needed stuff from C++ +#include <iostream> +#include <fstream> +#include <string> + +//... and also from C +#include <stdio.h> + +#include <boost/filesystem.hpp> + +#include <uhd/exception.hpp> +#include "ihexcvt.hpp" + +//Avoid repeating 'std::': +using namespace std; + +//The following function reads a hexadecimal number from a text file. +template <class T> +static bool ReadValueFromHex(ifstream& InputFile, T& outCh, unsigned char* ApplyChecksum) +{ + char V, L; + T X = 0; + outCh = 0; + + //Get the characters one by one. + //Remember: These values are big-endian. + //Remember: Every two hex characters (0-9/A-F) indicate ONE byte. + for (size_t i = 0; i < 2 * sizeof(T); i++) + { + InputFile.get( V ); + if (InputFile.fail()) + return false; + + X <<= 4; + if (V >= '0' && V <= '9') + L = (V - '0'); + else if (V >= 'a' && V <= 'f') + L = (V - 'a' + 10); + else if (V >= 'A' && V <= 'F') + L = (V - 'A' + 10); + else + return false; + X |= L; + + //Apply this character to the checksum + if (ApplyChecksum && i % 2 == 1) *ApplyChecksum += X & 0xFF; + } + + //Return... + outCh = X; + return true; +} + +//The following function writes a hexadecimal number from a text file. +template <class T> +static bool WriteHexValue(ofstream& OutFile, T Value, unsigned char* CalcChecksum) +{ + unsigned char V0 = 0; + char C; + + //Remember: These values are big-endian. + for (size_t i = 0; i < sizeof(T); i++) + { + //Get byte #i from the value. + V0 = (Value >> ((sizeof(T) - i - 1) * 8)) & 0xFF; + + //Extract the high nibble (4-bits) + if ((V0 & 0xF0) <= 0x90) + C = (V0 >> 4) + '0'; + else + C = (V0 >> 4) + ('A' - 10); + OutFile.put( C ); + + //Extract the low nibble (4-bits) + if ((V0 & 0xF) <= 0x9) + C = (V0 & 0xF) + '0'; + else + C = (V0 & 0xF) + ('A' - 10); + OutFile.put( C ); + + //Calculate the checksum + if (CalcChecksum) *CalcChecksum += V0; + } + return true; +} + +//Skip any incoming whitespaces +static void SkipWhitespace(ifstream& InputFile) +{ + for (;;) + { + char C; + InputFile.get(C); + if (InputFile.eof() || InputFile.fail()) break; + if (!(C == '\n' || C == '\r' || C == ' ' || C == '\t' || C == '\v')) + { + InputFile.putback(C); + break; + } + } +} + +//The function responsible for conversion from HEX files to BINary. +void Hex2Bin(const char* SrcName, const char* DstName, bool IgnoreChecksum) +{ + ifstream Src(SrcName); + if (Src.bad()) + { + throw uhd::runtime_error("Could not convert Intel .hex file to binary."); + } + + ofstream Dst(DstName, ios_base::binary); + if (Dst.bad()) + { + throw uhd::runtime_error("Could not convert Intel .hex file to binary."); + } + + char Ch; + int LineIdx = 1; + + unsigned char ByteCount; + unsigned short AddressLow; + unsigned short Extra; + unsigned long ExtraL; + unsigned long AddressOffset = 0; + unsigned char RecordType; + unsigned char Data[255]; + unsigned char CurChecksum; + unsigned char FileChecksum; + bool EOFMarker = false; + bool EOFWarn = false; + + for ( ;; ) + { + Src.get(Ch); + if (Src.eof()) + break; + if (EOFMarker && !EOFWarn) + { + throw uhd::runtime_error("Could not convert Intel .hex file to binary."); + } + if (Ch != ':') goto genericErr; + + CurChecksum = 0; + if (!ReadValueFromHex( Src, ByteCount, &CurChecksum )) goto genericErr; + if (!ReadValueFromHex( Src, AddressLow, &CurChecksum )) goto genericErr; + if (!ReadValueFromHex( Src, RecordType, &CurChecksum )) goto genericErr; + + switch (RecordType) + { + case 0x00: //Data record + for (int i = 0; i < ByteCount; i++) + if (!ReadValueFromHex( Src, Data[i], &CurChecksum )) goto genericErr; + break; + case 0x01: //End Marker + if ( ByteCount != 0 ) + { + goto onErrExit; + } + EOFMarker = true; + break; + case 0x02: //Extended Segment Address + if ( ByteCount != 2 || AddressLow != 0 ) + { + goto onErrExit; + } + if (!ReadValueFromHex( Src, Extra, &CurChecksum )) goto genericErr; + AddressOffset = (unsigned long)Extra << 4; + break; + case 0x03: //Start Segment Address + if ( ByteCount != 4 || AddressLow != 0 ) + { + goto onErrExit; + } + if (!ReadValueFromHex( Src, ExtraL, &CurChecksum )) goto genericErr; + break; + case 0x04: //Extended Linear Address + if ( ByteCount != 2 || AddressLow != 0 ) + { + goto onErrExit; + } + if (!ReadValueFromHex( Src, Extra, &CurChecksum )) goto genericErr; + AddressOffset = (unsigned long)Extra << 16; + break; + case 0x05: //Start Linear Address + if ( ByteCount != 4 || AddressLow != 0 ) + { + goto onErrExit; + } + if (!ReadValueFromHex( Src, ExtraL, &CurChecksum )) goto genericErr; + break; + } + + //Verify checksum + CurChecksum = (~(CurChecksum & 0xFF) + 1) & 0xFF; + if (!ReadValueFromHex( Src, FileChecksum, NULL )) goto genericErr; + if (CurChecksum != FileChecksum) + { + if (!IgnoreChecksum) goto onErrExit; + } + + //Put Data + if (RecordType == 0x00) + { + Dst.seekp( AddressLow + AddressOffset ); + for (int i = 0; i < ByteCount; i++) + { + Dst.put( Data[i] ); + } + } + + //Skip any white space + SkipWhitespace( Src ); + + LineIdx++; + } + + Dst << flush; + Dst.close(); + + return; + +genericErr: + throw uhd::runtime_error("Invalid Intel .hex file detected."); + +onErrExit: + Dst.close(); + Src.close(); + boost::filesystem::remove(DstName); + throw uhd::runtime_error("Could not convert Intel .hex file to binary."); +} diff --git a/host/lib/usrp_clock/octoclock/ihexcvt.hpp b/host/lib/usrp_clock/octoclock/ihexcvt.hpp new file mode 100644 index 000000000..d577ece1f --- /dev/null +++ b/host/lib/usrp_clock/octoclock/ihexcvt.hpp @@ -0,0 +1,22 @@ +// +// Copyright 2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// +#ifndef _IHEXCVT_HPP_ +#define _IHEXCVT_HPP_ + +void Hex2Bin(const char* SrcName, const char* DstName, bool IgnoreChecksum); + +#endif /* _IHEXCVT_HPP_ */ diff --git a/host/lib/usrp_clock/octoclock/octoclock_eeprom.cpp b/host/lib/usrp_clock/octoclock/octoclock_eeprom.cpp index 93c317191..49d1a0442 100644 --- a/host/lib/usrp_clock/octoclock/octoclock_eeprom.cpp +++ b/host/lib/usrp_clock/octoclock/octoclock_eeprom.cpp @@ -1,5 +1,5 @@ // -// Copyright 2014 Ettus Research LLC +// Copyright 2014-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -19,6 +19,7 @@ #include <uhd/usrp_clock/octoclock_eeprom.hpp> #include <uhd/transport/udp_simple.hpp> #include <uhd/usrp/mboard_eeprom.hpp> +#include <uhd/types/byte_vector.hpp> #include <uhd/types/mac_addr.hpp> #include <uhd/utils/byteswap.hpp> #include <boost/assign/list_of.hpp> @@ -37,26 +38,6 @@ using namespace uhd::usrp_clock; using namespace uhd::transport; /*********************************************************************** - * Utility functions - **********************************************************************/ - -//! A wrapper around std::copy that takes ranges instead of iterators. -template<typename RangeSrc, typename RangeDst> inline -void byte_copy(const RangeSrc &src, RangeDst &dst){ - std::copy(boost::begin(src), boost::end(src), boost::begin(dst)); -} - -//! create a string from a byte vector, return empty if invalid ascii -static const std::string bytes_to_string(const byte_vector_t &bytes){ - std::string out; - BOOST_FOREACH(boost::uint8_t byte, bytes){ - if (byte < 32 or byte > 127) return out; - out += byte; - } - return out; -} - -/*********************************************************************** * Implementation **********************************************************************/ void octoclock_eeprom_t::_load(){ diff --git a/host/lib/usrp_clock/octoclock/octoclock_image_loader.cpp b/host/lib/usrp_clock/octoclock/octoclock_image_loader.cpp new file mode 100644 index 000000000..c88177f0f --- /dev/null +++ b/host/lib/usrp_clock/octoclock/octoclock_image_loader.cpp @@ -0,0 +1,340 @@ +// +// Copyright 2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <cstring> +#include <fstream> +#include <iostream> +#include <string> + +#include <boost/cstdint.hpp> +#include <boost/filesystem.hpp> +#include <boost/format.hpp> +#include <boost/lexical_cast.hpp> +#include <boost/thread.hpp> + +#include <uhd/device.hpp> +#include <uhd/image_loader.hpp> +#include <uhd/transport/udp_simple.hpp> +#include <uhd/types/device_addr.hpp> +#include <uhd/types/time_spec.hpp> +#include <uhd/utils/byteswap.hpp> +#include <uhd/utils/paths.hpp> +#include <uhd/utils/static.hpp> + +#include "octoclock_impl.hpp" +#include "common.h" +#include "ihexcvt.hpp" + +namespace fs = boost::filesystem; +using namespace uhd; +using namespace uhd::usrp_clock; +using namespace uhd::transport; + +#define OCTOCLOCK_FIRMWARE_MAX_SIZE_BYTES (1024*120) // Last 8 MB are for bootloader +#define OCTOCLOCK_BLOCK_SIZE 256 + +/* + * OctoClock burn session + */ +typedef struct { + bool valid; + uhd::device_addr_t dev_addr; + std::string given_filepath; + std::string actual_filepath; // If using a .hex, this is the converted .bin + bool from_hex; + boost::uint32_t size; + boost::uint16_t crc; + boost::uint16_t num_blocks; + udp_simple::sptr ctrl_xport; + udp_simple::sptr fw_xport; + boost::uint8_t data_in[udp_simple::mtu]; +} octoclock_session_t; + +static void octoclock_calculate_crc(octoclock_session_t &session){ + std::ifstream ifile(session.actual_filepath.c_str()); + boost::uint8_t temp_image[OCTOCLOCK_FIRMWARE_MAX_SIZE_BYTES]; + ifile.read((char*)temp_image, session.size); + + session.crc = 0xFFFF; + for(size_t i = 0; i < session.size; i++){ + session.crc ^= temp_image[i]; + for(boost::uint8_t j = 0; j < 8; ++j){ + if(session.crc & 1) session.crc = (session.crc >> 1) ^ 0xA001; + else session.crc = (session.crc >> 1); + } + } + + ifile.close(); +} + +static void octoclock_validate_firmware_image(octoclock_session_t &session){ + if(not fs::exists(session.given_filepath)){ + throw uhd::runtime_error(str(boost::format("Could not find image at path \"%s\"") + % session.given_filepath)); + } + + std::string extension = fs::extension(session.given_filepath); + if(extension == ".bin"){ + session.actual_filepath = session.given_filepath; + session.from_hex = false; + } + else if(extension == ".hex"){ + session.actual_filepath = fs::path(fs::path(uhd::get_tmp_path()) / + str(boost::format("octoclock_fw_%d.bin") + % time_spec_t::get_system_time().get_full_secs()) + ).string(); + + Hex2Bin(session.given_filepath.c_str(), session.actual_filepath.c_str(), false); + session.from_hex = true; + } + else throw uhd::runtime_error(str(boost::format("Invalid extension \"%s\". Extension must be .hex or .bin."))); + + session.size = fs::file_size(session.actual_filepath); + if(session.size > OCTOCLOCK_FIRMWARE_MAX_SIZE_BYTES){ + throw uhd::runtime_error(str(boost::format("The specified firmware image is too large: %d vs. %d") + % session.size % OCTOCLOCK_FIRMWARE_MAX_SIZE_BYTES)); + } + + session.num_blocks = (session.size % OCTOCLOCK_BLOCK_SIZE) ? ((session.size / OCTOCLOCK_BLOCK_SIZE) + 1) + : (session.size / OCTOCLOCK_BLOCK_SIZE); + + octoclock_calculate_crc(session); + session.valid = true; +} + +static void octoclock_setup_session(octoclock_session_t &session, + const std::string &filepath){ + + // If no filepath is given, use the default + if(filepath == ""){ + session.given_filepath = find_image_path(str(boost::format("octoclock_r%d_fw.hex") + % boost::lexical_cast<std::string>( + session.dev_addr.get("revision","4") + ))); + } + else session.given_filepath = filepath; + + octoclock_validate_firmware_image(session); + + session.ctrl_xport = udp_simple::make_connected(session.dev_addr["addr"], + BOOST_STRINGIZE(OCTOCLOCK_UDP_CTRL_PORT)); + session.fw_xport = udp_simple::make_connected(session.dev_addr["addr"], + BOOST_STRINGIZE(OCTOCLOCK_UDP_FW_PORT)); +} + +static void octoclock_reset_into_bootloader(octoclock_session_t &session){ + + // Already in bootloader + if(session.dev_addr["type"] == "octoclock-bootloader") + return; + + octoclock_packet_t pkt_out; + pkt_out.sequence = uhd::htonx<boost::uint32_t>(std::rand()); + const octoclock_packet_t* pkt_in = reinterpret_cast<const octoclock_packet_t*>(session.data_in); + size_t len; + + std::cout << " -- Resetting into bootloader..." << std::flush; + UHD_OCTOCLOCK_SEND_AND_RECV(session.ctrl_xport, RESET_CMD, pkt_out, len, session.data_in); + if(UHD_OCTOCLOCK_PACKET_MATCHES(RESET_ACK, pkt_out, pkt_in, len)){ + + // Make sure this device is now in its bootloader + boost::this_thread::sleep(boost::posix_time::milliseconds(500)); + uhd::device_addrs_t octoclocks = uhd::device::find( + uhd::device_addr_t(str(boost::format("addr=%s") + % session.dev_addr["addr"] + ))); + if(octoclocks.size() == 0){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Failed to reset OctoClock."); + } + else if(octoclocks[0]["type"] != "octoclock-bootloader"){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Failed to reset OctoClock."); + } + else{ + std::cout << "successful." << std::endl; + session.dev_addr = octoclocks[0]; + } + } + else{ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Failed to reset OctoClock."); + } +} + +static void octoclock_burn(octoclock_session_t &session){ + + // Make sure we're in the bootloader for this + octoclock_reset_into_bootloader(session); + + octoclock_packet_t pkt_out; + pkt_out.sequence = htonx<boost::uint32_t>(std::rand()); + const octoclock_packet_t* pkt_in = reinterpret_cast<const octoclock_packet_t*>(session.data_in); + + // Tell OctoClock to prepare for burn + pkt_out.len = htonx<boost::uint16_t>(session.size); + size_t len = 0; + std::cout << " -- Preparing OctoClock for firmware load..." << std::flush; + pkt_out.len = session.size; + pkt_out.crc = session.crc; + UHD_OCTOCLOCK_SEND_AND_RECV(session.fw_xport, PREPARE_FW_BURN_CMD, pkt_out, len, session.data_in); + if(UHD_OCTOCLOCK_PACKET_MATCHES(FW_BURN_READY_ACK, pkt_out, pkt_in, len)){ + std::cout << "successful." << std::endl; + } + else{ + std::cout << "failed." << std::endl; + if(session.from_hex){ + fs::remove(session.actual_filepath); + } + throw uhd::runtime_error("Failed to prepare OctoClock for firmware load."); + } + + // Start burning + std::ifstream image(session.actual_filepath.c_str(), std::ios::binary); + for(size_t i = 0; i < session.num_blocks; i++){ + pkt_out.sequence++; + pkt_out.addr = i * OCTOCLOCK_BLOCK_SIZE; + + std::cout << str(boost::format("\r -- Loading firmware: %d%% (%d/%d blocks)") + % int((double(i)/double(session.num_blocks))*100) + % i % session.num_blocks) + << std::flush; + + memset(pkt_out.data, 0, OCTOCLOCK_BLOCK_SIZE); + image.read((char*)pkt_out.data, OCTOCLOCK_BLOCK_SIZE); + UHD_OCTOCLOCK_SEND_AND_RECV(session.fw_xport, FILE_TRANSFER_CMD, pkt_out, len, session.data_in); + if(not UHD_OCTOCLOCK_PACKET_MATCHES(FILE_TRANSFER_ACK, pkt_out, pkt_in, len)){ + image.close(); + std::cout << std::endl; + if(session.from_hex){ + fs::remove(session.actual_filepath); + } + throw uhd::runtime_error("Failed to load firmware."); + } + } + + std::cout << str(boost::format("\r -- Loading firmware: 100%% (%d/%d blocks)") + % session.num_blocks % session.num_blocks) + << std::endl; + image.close(); +} + +static void octoclock_verify(octoclock_session_t &session){ + + octoclock_packet_t pkt_out; + pkt_out.sequence = htonx<boost::uint32_t>(std::rand()); + const octoclock_packet_t* pkt_in = reinterpret_cast<const octoclock_packet_t*>(session.data_in); + size_t len = 0; + + std::ifstream image(session.actual_filepath.c_str(), std::ios::binary); + boost::uint8_t image_part[OCTOCLOCK_BLOCK_SIZE]; + boost::uint16_t cmp_len = 0; + for(size_t i = 0; i < session.num_blocks; i++){ + pkt_out.sequence++; + pkt_out.addr = i * OCTOCLOCK_BLOCK_SIZE; + + std::cout << str(boost::format("\r -- Verifying firmware load: %d%% (%d/%d blocks)") + % int((double(i)/double(session.num_blocks))*100) + % i % session.num_blocks) + << std::flush; + + memset(image_part, 0, OCTOCLOCK_BLOCK_SIZE); + image.read((char*)image_part, OCTOCLOCK_BLOCK_SIZE); + cmp_len = image.gcount(); + + UHD_OCTOCLOCK_SEND_AND_RECV(session.fw_xport, READ_FW_CMD, pkt_out, len, session.data_in); + if(UHD_OCTOCLOCK_PACKET_MATCHES(READ_FW_ACK, pkt_out, pkt_in, len)){ + if(memcmp(pkt_in->data, image_part, cmp_len)){ + std::cout << std::endl; + image.close(); + if(session.from_hex){ + fs::remove(session.actual_filepath); + } + throw uhd::runtime_error("Failed to verify OctoClock firmware."); + } + } + else{ + std::cout << std::endl; + image.close(); + if(session.from_hex){ + fs::remove(session.actual_filepath); + } + throw uhd::runtime_error("Failed to verify OctoClock firmware."); + } + } + + image.close(); + if(session.from_hex){ + fs::remove(session.actual_filepath); + } + std::cout << str(boost::format("\r -- Verifying firmware load: 100%% (%d/%d blocks)") + % session.num_blocks % session.num_blocks) + << std::endl; +} + +static void octoclock_finalize(octoclock_session_t &session){ + + octoclock_packet_t pkt_out; + pkt_out.sequence = htonx<boost::uint32_t>(std::rand()); + const octoclock_packet_t* pkt_in = reinterpret_cast<const octoclock_packet_t*>(session.data_in); + size_t len = 0; + + std::cout << " -- Finalizing firmware load..." << std::flush; + UHD_OCTOCLOCK_SEND_AND_RECV(session.fw_xport, FINALIZE_BURNING_CMD, pkt_out, len, session.data_in); + if(UHD_OCTOCLOCK_PACKET_MATCHES(FINALIZE_BURNING_ACK, pkt_out, pkt_in, len)){ + std::cout << "successful." << std::endl; + } + else{ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Failed to finalize OctoClock firmware load."); + } +} + +bool octoclock_image_loader(const image_loader::image_loader_args_t &image_loader_args){ + // See if we can find an OctoClock with the given args + device_addrs_t devs = octoclock_find(image_loader_args.args); + if(devs.size() == 0 or !image_loader_args.load_firmware) return false; + + octoclock_session_t session; + session.dev_addr = devs[0]; + octoclock_setup_session(session, + image_loader_args.firmware_path + ); + + std::cout << boost::format("Unit: OctoClock (%s)") + % session.dev_addr["addr"] + << std::endl; + std::cout << "Firmware: " << session.given_filepath << std::endl; + + octoclock_burn(session); + octoclock_verify(session); + octoclock_finalize(session); + + return true; +} + +UHD_STATIC_BLOCK(register_octoclock_image_loader){ + std::string recovery_instructions = "Aborting. Your OctoClock firmware is now corrupt. The bootloader\n" + "is functional, but the device will not have functional clock distribution." + "Run this utility again to restore functionality or refer to:\n\n" + "http://files.ettus.com/manual/page_octoclock.html\n\n" + "for alternative setups."; + + image_loader::register_image_loader("octoclock", + octoclock_image_loader, + recovery_instructions); +} diff --git a/host/lib/usrp_clock/octoclock/octoclock_impl.cpp b/host/lib/usrp_clock/octoclock/octoclock_impl.cpp index b98d95725..ef1bc8ca0 100644 --- a/host/lib/usrp_clock/octoclock/octoclock_impl.cpp +++ b/host/lib/usrp_clock/octoclock/octoclock_impl.cpp @@ -357,14 +357,14 @@ void octoclock_impl::_get_state(const std::string &oc){ } uhd::dict<ref_t, std::string> _ref_strings = boost::assign::map_list_of - (NO_REF, "none") + (NO_REF, "none") (INTERNAL, "internal") (EXTERNAL, "external") ; uhd::dict<switch_pos_t, std::string> _switch_pos_strings = boost::assign::map_list_of - (UP, "Prefer internal") - (DOWN, "Prefer external") + (PREFER_INTERNAL, "Prefer internal") + (PREFER_EXTERNAL, "Prefer external") ; sensor_value_t octoclock_impl::_ext_ref_detected(const std::string &oc){ @@ -410,7 +410,7 @@ boost::uint32_t octoclock_impl::_get_time(const std::string &oc){ } std::string octoclock_impl::_get_images_help_message(const std::string &addr){ - const std::string image_name = "octoclock_r4_fw.bin"; + const std::string image_name = "octoclock_r4_fw.hex"; //Check to see if image is in default location std::string image_location; diff --git a/host/lib/usrp_clock/octoclock/octoclock_impl.hpp b/host/lib/usrp_clock/octoclock/octoclock_impl.hpp index ab45cd5f0..453e75ec5 100644 --- a/host/lib/usrp_clock/octoclock/octoclock_impl.hpp +++ b/host/lib/usrp_clock/octoclock/octoclock_impl.hpp @@ -31,6 +31,8 @@ #include "common.h" +uhd::device_addrs_t octoclock_find(const uhd::device_addr_t &hint); + /*! * OctoClock implementation guts */ diff --git a/host/lib/utils/paths.cpp b/host/lib/utils/paths.cpp index f29318ddd..ac4a010a7 100644 --- a/host/lib/utils/paths.cpp +++ b/host/lib/utils/paths.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010-2012 Ettus Research LLC +// Copyright 2010-2012,2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -111,6 +111,7 @@ static std::vector<std::string> get_env_paths(const std::string &var_name){ return paths; } +#ifndef UHD_PLATFORM_WIN32 /*! Expand a tilde character to the $HOME path. * * The path passed to this function must start with the tilde character in order @@ -132,6 +133,7 @@ static std::string expand_home_directory(std::string path) { return path; } +#endif /*********************************************************************** * Implement the functions in paths.hpp @@ -239,7 +241,7 @@ std::string _get_images_path_from_registry(const std::string& registry_key_path) //Get a handle to the key location HKEY hkey_location; - if (RegOpenKeyExA(hkey_parent, reg_path.c_str(), NULL, KEY_QUERY_VALUE, &hkey_location) != ERROR_SUCCESS) + if (RegOpenKeyExA(hkey_parent, reg_path.c_str(), 0, KEY_QUERY_VALUE, &hkey_location) != ERROR_SUCCESS) return std::string(); //Query key value @@ -367,10 +369,10 @@ std::string uhd::find_utility(std::string name) { .string(); } -std::string uhd::print_utility_error(std::string name){ +std::string uhd::print_utility_error(const std::string &name, const std::string &args){ #ifdef UHD_PLATFORM_WIN32 - return "As an Administrator, please run:\n\n\"" + find_utility(name) + "\""; + return "As an Administrator, please run:\n\n\"" + find_utility(name) + args + "\""; #else - return "Please run:\n\n \"" + find_utility(name) + "\""; + return "Please run:\n\n \"" + find_utility(name) + (args.empty() ? "" : (" " + args)) + "\""; #endif } diff --git a/host/lib/utils/platform.cpp b/host/lib/utils/platform.cpp index e2f92039e..a9cef663b 100644 --- a/host/lib/utils/platform.cpp +++ b/host/lib/utils/platform.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010-2012 Ettus Research LLC +// Copyright 2010-2012,2014 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -19,7 +19,7 @@ #include <uhd/config.hpp> #include <boost/functional/hash.hpp> #ifdef UHD_PLATFORM_WIN32 -#include <Windows.h> +#include <windows.h> #else #include <unistd.h> #endif diff --git a/host/lib/utils/thread_priority.cpp b/host/lib/utils/thread_priority.cpp index 7c3faa37a..af25d088a 100644 --- a/host/lib/utils/thread_priority.cpp +++ b/host/lib/utils/thread_priority.cpp @@ -74,7 +74,7 @@ static void check_priority_range(float priority){ #ifdef HAVE_WIN_SETTHREADPRIORITY #include <windows.h> - void uhd::set_thread_priority(float priority, bool realtime){ + void uhd::set_thread_priority(float priority, UHD_UNUSED(bool realtime)){ check_priority_range(priority); /* |