diff options
Diffstat (limited to 'host/lib')
| -rw-r--r-- | host/lib/CMakeLists.txt | 5 | ||||
| -rw-r--r-- | host/lib/usrp/dboard/db_wbx.cpp | 504 |
2 files changed, 509 insertions, 0 deletions
diff --git a/host/lib/CMakeLists.txt b/host/lib/CMakeLists.txt index 5252eda8f..b603a9deb 100644 --- a/host/lib/CMakeLists.txt +++ b/host/lib/CMakeLists.txt @@ -89,6 +89,11 @@ UHD_PYTHON_GEN_SOURCE_FILE( INCLUDE_DIRECTORIES(${CMAKE_CURRENT_BINARY_DIR}/ic_reg_maps) UHD_PYTHON_GEN_SOURCE_FILE( + ${CMAKE_CURRENT_SOURCE_DIR}/ic_reg_maps/gen_adf4350_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/ic_reg_maps/adf4350_regs.hpp +) + +UHD_PYTHON_GEN_SOURCE_FILE( ${CMAKE_CURRENT_SOURCE_DIR}/ic_reg_maps/gen_adf4360_regs.py ${CMAKE_CURRENT_BINARY_DIR}/ic_reg_maps/adf4360_regs.hpp ) diff --git a/host/lib/usrp/dboard/db_wbx.cpp b/host/lib/usrp/dboard/db_wbx.cpp new file mode 100644 index 000000000..99f06eedc --- /dev/null +++ b/host/lib/usrp/dboard/db_wbx.cpp @@ -0,0 +1,504 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +static const bool wbx_debug = false; + +// IO Pin functions +#define POWER_IO (1 << 7) // Low enables power supply +#define ANTSW_IO (1 << 6) // On TX DB, 0 = TX, 1 = RX, on RX DB 0 = main ant, 1 = RX2 +#define MIXER_IO (1 << 5) // Enable appropriate mixer +#define LOCKDET_MASK (1 << 2) // Input pin + +// Mixer constants +#define MIXER_ENB MIXER_IO +#define MIXER_DIS 0 + +// Power constants +#define POWER_UP 0 +#define POWER_DOWN POWER_IO + +// Antenna constants +#define ANT_TX 0 //the tx line is transmitting +#define ANT_RX ANTSW_IO //the tx line is receiving +#define ANT_TXRX 0 //the rx line is on txrx +#define ANT_RX2 ANTSW_IO //the rx line in on rx2 +#define ANT_XX 0 //dont care how the antenna is set + +#include "adf4350_regs.hpp" +#include <uhd/types/dict.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/types/ranges.hpp> +#include <uhd/utils/assert.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/utils/algorithm.hpp> +#include <uhd/usrp/dboard_base.hpp> +#include <uhd/usrp/dboard_manager.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/format.hpp> +#include <boost/math/special_functions/round.hpp> + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +/*********************************************************************** + * The WBX dboard + **********************************************************************/ +static const float _max_rx_pga0_gain = 45; + +class wbx_xcvr : public xcvr_dboard_base{ +public: + wbx_xcvr( + ctor_args_t const& args, + const freq_range_t &freq_range, + bool rx_div2, bool tx_div2 + ); + ~wbx_xcvr(void); + + void rx_get(const wax::obj &key, wax::obj &val); + void rx_set(const wax::obj &key, const wax::obj &val); + + void tx_get(const wax::obj &key, wax::obj &val); + void tx_set(const wax::obj &key, const wax::obj &val); + +private: + freq_range_t _freq_range; + uhd::dict<dboard_iface::unit_t, bool> _div2; + double _rx_lo_freq, _tx_lo_freq; + std::string _rx_ant; + float _rx_pga0_gain; + + void set_rx_lo_freq(double freq); + void set_tx_lo_freq(double freq); + void set_rx_ant(const std::string &ant); + void set_rx_pga0_gain(float gain); + + /*! + * Set the LO frequency for the particular dboard unit. + * \param unit which unit rx or tx + * \param target_freq the desired frequency in Hz + * \return the actual frequency in Hz + */ + double set_lo_freq(dboard_iface::unit_t unit, double target_freq); + + /*! + * Get the lock detect status of the LO. + * \param unit which unit rx or tx + * \return true for locked + */ + bool get_locked(dboard_iface::unit_t unit){ + return (this->get_iface()->read_gpio(unit) & LOCKDET_MASK) != 0; + } +}; + +/*********************************************************************** + * Register the WBX dboard (min freq, max freq, rx div2, tx div2) + **********************************************************************/ +static dboard_base::sptr make_wbx(dboard_base::ctor_args_t const& args){ + return dboard_base::sptr(new wbx_xcvr(args, freq_range_t(50e6, 2200e6), false, false)); +} + +UHD_STATIC_BLOCK(reg_wbx_dboards){ + dboard_manager::register_dboard(0x0052, &make_wbx, "WBX NG RX"); + dboard_manager::register_dboard(0x0053, &make_wbx, "WBX NG TX"); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +wbx_xcvr::wbx_xcvr( + ctor_args_t const& args, + const freq_range_t &freq_range, + bool rx_div2, bool tx_div2 +) : xcvr_dboard_base(args){ + _freq_range = freq_range; + _div2[dboard_iface::UNIT_RX] = rx_div2; + _div2[dboard_iface::UNIT_TX] = tx_div2; + + //enable the clocks that we need + this->get_iface()->set_clock_enabled(dboard_iface::UNIT_TX, true); + this->get_iface()->set_clock_enabled(dboard_iface::UNIT_RX, true); + + //set the gpio directions + boost::uint16_t output_enables = POWER_IO | ANTSW_IO | MIXER_IO; + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, output_enables); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, output_enables); + + //setup the tx atr (this does not change with antenna) + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, POWER_UP | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, POWER_UP | ANT_RX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, POWER_UP | ANT_TX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, POWER_UP | ANT_TX | MIXER_ENB); + + //setup the rx atr (this does not change with antenna) + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, POWER_UP | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, POWER_UP | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, POWER_UP | ANT_RX2| MIXER_ENB); + + //set some default values + set_rx_lo_freq((_freq_range.min + _freq_range.max)/2.0); + set_tx_lo_freq((_freq_range.min + _freq_range.max)/2.0); + set_rx_ant("RX2"); + set_rx_pga0_gain(0); +} + +wbx_xcvr::~wbx_xcvr(void){ + /* NOP */ +} + +/*********************************************************************** + * Helper Methods + **********************************************************************/ +void wbx_xcvr::set_rx_lo_freq(double freq){ + _rx_lo_freq = set_lo_freq(dboard_iface::UNIT_RX, freq); +} + +void wbx_xcvr::set_tx_lo_freq(double freq){ + _tx_lo_freq = set_lo_freq(dboard_iface::UNIT_TX, freq); +} + +void wbx_xcvr::set_rx_ant(const std::string &ant){ + //validate input + UHD_ASSERT_THROW(ant == "TX/RX" or ant == "RX2"); + + //set the rx atr regs that change with antenna setting + this->get_iface()->set_atr_reg( + dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, + POWER_UP | MIXER_ENB | ((ant == "TX/RX")? ANT_TXRX : ANT_RX2) + ); + + //shadow the setting + _rx_ant = ant; +} + +void wbx_xcvr::set_rx_pga0_gain(float gain){ + //clip the input + gain = std::clip<float>(gain, 0, _max_rx_pga0_gain); + + //voltage level constants + static const float max_volts = float(.2), min_volts = float(1.2); + static const float slope = (max_volts-min_volts)/_max_rx_pga0_gain; + + //calculate the voltage for the aux dac + float dac_volts = gain*slope + min_volts; + + //write the new voltage to the aux dac + this->get_iface()->write_aux_dac(dboard_iface::UNIT_RX, 1, dac_volts); + + //shadow the setting (does not account for precision loss) + _rx_pga0_gain = gain; +} + +double wbx_xcvr::set_lo_freq( + dboard_iface::unit_t unit, + double target_freq +){ + if (wbx_debug) std::cerr << boost::format( + "RFX tune: target frequency %f Mhz" + ) % (target_freq/1e6) << std::endl; + + //clip the input + target_freq = std::clip(target_freq, _freq_range.min, _freq_range.max); + if (_div2[unit]) target_freq *= 2; + + //map prescalers to the register enums + static const uhd::dict<int, adf4350_regs_t::prescaler_value_t> prescaler_to_enum = map_list_of + (8, adf4350_regs_t::PRESCALER_VALUE_8_9) + (16, adf4350_regs_t::PRESCALER_VALUE_16_17) + (32, adf4350_regs_t::PRESCALER_VALUE_32_33) + ; + + //map band select clock dividers to enums + static const uhd::dict<int, adf4350_regs_t::band_select_clock_div_t> bandsel_to_enum = map_list_of + (1, adf4350_regs_t::BAND_SELECT_CLOCK_DIV_1) + (2, adf4350_regs_t::BAND_SELECT_CLOCK_DIV_2) + (4, adf4350_regs_t::BAND_SELECT_CLOCK_DIV_4) + (8, adf4350_regs_t::BAND_SELECT_CLOCK_DIV_8) + ; + + double actual_freq, ref_freq = this->get_iface()->get_clock_rate(unit); + int R, BS, P, B, A; + + /* + * The goal here to to loop though possible R dividers, + * band select clock dividers, and prescaler values. + * Calculate the A and B counters for each set of values. + * The loop exists when it meets all of the constraints. + * The resulting loop values are loaded into the registers. + * + * fvco = [P*B + A] * fref/R + * fvco*R/fref = P*B + A = N + */ + for(R = 2; R <= 32; R+=2){ + BOOST_FOREACH(BS, bandsel_to_enum.keys()){ + if (ref_freq/R/BS > 1e6) continue; //constraint on band select clock + BOOST_FOREACH(P, prescaler_to_enum.keys()){ + //calculate B and A from N + double N = target_freq*R/ref_freq; + B = int(std::floor(N/P)); + A = boost::math::iround(N - P*B); + if (B < A or B > 8191 or B < 3 or A > 31) continue; //constraints on A, B + //calculate the actual frequency + actual_freq = double(P*B + A)*ref_freq/R; + if (actual_freq/P > 300e6) continue; //constraint on prescaler output + //constraints met: exit loop + goto done_loop; + } + } + } done_loop: + + if (wbx_debug) std::cerr << boost::format( + "RFX tune: R=%d, BS=%d, P=%d, B=%d, A=%d" + ) % R % BS % P % B % A << std::endl; + + //load the register values + adf4350_regs_t regs; + regs.core_power_level = adf4350_regs_t::CORE_POWER_LEVEL_10MA; + regs.counter_operation = adf4350_regs_t::COUNTER_OPERATION_NORMAL; + regs.muxout_control = adf4350_regs_t::MUXOUT_CONTROL_DLD; + regs.phase_detector_polarity = adf4350_regs_t::PHASE_DETECTOR_POLARITY_POS; + regs.charge_pump_output = adf4350_regs_t::CHARGE_PUMP_OUTPUT_NORMAL; + regs.cp_gain_0 = adf4350_regs_t::CP_GAIN_0_SET1; + regs.mute_till_ld = adf4350_regs_t::MUTE_TILL_LD_ENB; + regs.output_power_level = adf4350_regs_t::OUTPUT_POWER_LEVEL_3_5MA; + regs.current_setting1 = adf4350_regs_t::CURRENT_SETTING1_0_31MA; + regs.current_setting2 = adf4350_regs_t::CURRENT_SETTING2_0_31MA; + regs.power_down = adf4350_regs_t::POWER_DOWN_NORMAL_OP; + regs.prescaler_value = prescaler_to_enum[P]; + regs.a_counter = A; + regs.b_counter = B; + regs.cp_gain_1 = adf4350_regs_t::CP_GAIN_1_SET1; + regs.divide_by_2_output = (_div2[unit])? + adf4350_regs_t::DIVIDE_BY_2_OUTPUT_DIV2 : + adf4350_regs_t::DIVIDE_BY_2_OUTPUT_FUND ; + regs.divide_by_2_prescaler = adf4350_regs_t::DIVIDE_BY_2_PRESCALER_FUND; + regs.r_counter = R; + regs.ablpw = adf4350_regs_t::ABLPW_3_0NS; + regs.lock_detect_precision = adf4350_regs_t::LOCK_DETECT_PRECISION_5CYCLES; + regs.test_mode_bit = 0; + regs.band_select_clock_div = bandsel_to_enum[BS]; + + //write the registers + std::vector<adf4350_regs_t::addr_t> addrs = list_of //correct power-up sequence to write registers (R, C, N) + (adf4350_regs_t::ADDR_RCOUNTER) + (adf4350_regs_t::ADDR_CONTROL) + (adf4350_regs_t::ADDR_NCOUNTER) + ; + BOOST_FOREACH(adf4350_regs_t::addr_t addr, addrs){ + this->get_iface()->write_spi( + unit, spi_config_t::EDGE_RISE, + regs.get_reg(addr), 24 + ); + } + + //return the actual frequency + if (_div2[unit]) actual_freq /= 2; + if (wbx_debug) std::cerr << boost::format( + "RFX tune: actual frequency %f Mhz" + ) % (actual_freq/1e6) << std::endl; + return actual_freq; +} + +/*********************************************************************** + * RX Get and Set + **********************************************************************/ +void wbx_xcvr::rx_get(const wax::obj &key_, wax::obj &val){ + wax::obj key; std::string name; + boost::tie(key, name) = extract_named_prop(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = dboard_id::to_string(get_rx_id()); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + UHD_ASSERT_THROW(name == "PGA0"); + val = _rx_pga0_gain; + return; + + case SUBDEV_PROP_GAIN_RANGE: + UHD_ASSERT_THROW(name == "PGA0"); + val = gain_range_t(0, _max_rx_pga0_gain, float(0.022)); + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(1, "PGA0"); + return; + + case SUBDEV_PROP_FREQ: + val = _rx_lo_freq; + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = _freq_range; + return; + + case SUBDEV_PROP_ANTENNA: + val = _rx_ant; + return; + + case SUBDEV_PROP_ANTENNA_NAMES:{ + prop_names_t ants = list_of("TX/RX")("RX2"); + val = ants; + } + return; + + case SUBDEV_PROP_QUADRATURE: + val = true; + return; + + case SUBDEV_PROP_IQ_SWAPPED: + val = true; + return; + + case SUBDEV_PROP_SPECTRUM_INVERTED: + val = false; + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_LO_LOCKED: + val = this->get_locked(dboard_iface::UNIT_RX); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void wbx_xcvr::rx_set(const wax::obj &key_, const wax::obj &val){ + wax::obj key; std::string name; + boost::tie(key, name) = extract_named_prop(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + set_rx_lo_freq(val.as<double>()); + return; + + case SUBDEV_PROP_GAIN: + UHD_ASSERT_THROW(name == "PGA0"); + set_rx_pga0_gain(val.as<float>()); + return; + + case SUBDEV_PROP_ANTENNA: + set_rx_ant(val.as<std::string>()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX Get and Set + **********************************************************************/ +void wbx_xcvr::tx_get(const wax::obj &key_, wax::obj &val){ + wax::obj key; std::string name; + boost::tie(key, name) = extract_named_prop(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = dboard_id::to_string(get_tx_id()); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + val = float(0); + return; + + case SUBDEV_PROP_GAIN_RANGE: + val = gain_range_t(0, 0, 0); + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_FREQ: + val = _tx_lo_freq; + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = _freq_range; + return; + + case SUBDEV_PROP_ANTENNA: + val = std::string("TX/RX"); + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = prop_names_t(1, "TX/RX"); + return; + + case SUBDEV_PROP_QUADRATURE: + val = true; + return; + + case SUBDEV_PROP_IQ_SWAPPED: + val = false; + return; + + case SUBDEV_PROP_SPECTRUM_INVERTED: + val = false; + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = true; + return; + + case SUBDEV_PROP_LO_LOCKED: + val = this->get_locked(dboard_iface::UNIT_TX); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void wbx_xcvr::tx_set(const wax::obj &key_, const wax::obj &val){ + wax::obj key; std::string name; + boost::tie(key, name) = extract_named_prop(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + set_tx_lo_freq(val.as<double>()); + return; + + case SUBDEV_PROP_GAIN: + //no gains to set! + return; + + case SUBDEV_PROP_ANTENNA: + //its always set to tx/rx, so we only allow this value + UHD_ASSERT_THROW(val.as<std::string>() == "TX/RX"); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} |