diff options
Diffstat (limited to 'host/lib')
| -rw-r--r-- | host/lib/usrp/x300/x300_clock_ctrl.cpp | 4 | ||||
| -rw-r--r-- | host/lib/usrp/x300/x300_clock_ctrl.hpp | 6 | ||||
| -rw-r--r-- | host/lib/usrp/x300/x300_impl.cpp | 26 |
3 files changed, 25 insertions, 11 deletions
diff --git a/host/lib/usrp/x300/x300_clock_ctrl.cpp b/host/lib/usrp/x300/x300_clock_ctrl.cpp index a986928a7..6a0b19c8c 100644 --- a/host/lib/usrp/x300/x300_clock_ctrl.cpp +++ b/host/lib/usrp/x300/x300_clock_ctrl.cpp @@ -48,6 +48,10 @@ x300_clock_ctrl_impl(uhd::spi_iface::sptr spiface, set_master_clock_rate(master_clock_rate); } +void reset() { + set_master_clock_rate(_master_clock_rate); +} + void sync_clocks(void) { //soft sync: //put the sync IO into output mode - FPGA must be input diff --git a/host/lib/usrp/x300/x300_clock_ctrl.hpp b/host/lib/usrp/x300/x300_clock_ctrl.hpp index 0e3caf900..4e7d6fc8e 100644 --- a/host/lib/usrp/x300/x300_clock_ctrl.hpp +++ b/host/lib/usrp/x300/x300_clock_ctrl.hpp @@ -78,6 +78,12 @@ public: * \param true = on, false = off */ virtual void set_ref_out(const bool) = 0; + + /*! Reset the clock control. + * Should be called if the reference clock changes + * to reduce the time required to achieve a lock. + */ + virtual void reset(void) = 0; }; #endif /* INCLUDED_X300_CLOCK_CTRL_HPP */ diff --git a/host/lib/usrp/x300/x300_impl.cpp b/host/lib/usrp/x300/x300_impl.cpp index 5e0635767..a231d7059 100644 --- a/host/lib/usrp/x300/x300_impl.cpp +++ b/host/lib/usrp/x300/x300_impl.cpp @@ -579,15 +579,6 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) //////////////////////////////////////////////////////////////////// UHD_MSG(status) << "Setup RF frontend clocking..." << std::endl; - // Init shadow and clock source; the device comes up with it's internal - // clock source before locking to something else (if requested). - mb.clock_control_regs__clock_source = ZPU_SR_CLOCK_CTRL_CLK_SRC_INTERNAL; - mb.clock_control_regs__pps_select = ZPU_SR_CLOCK_CTRL_PPS_SRC_INTERNAL; - mb.clock_control_regs__pps_out_enb = 0; - mb.clock_control_regs__tcxo_enb = 1; - mb.clock_control_regs__gpsdo_pwr = 1; - this->update_clock_control(mb); - size_t hw_rev = 0; if(mb_eeprom.has_key("revision") and not mb_eeprom["revision"].empty()) { try { @@ -604,6 +595,15 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) hw_rev = X300_REV("D"); } + //Initialize clock control with internal references and GPSDO power on. + mb.clock_control_regs__clock_source = ZPU_SR_CLOCK_CTRL_CLK_SRC_INTERNAL; + mb.clock_control_regs__pps_select = ZPU_SR_CLOCK_CTRL_PPS_SRC_INTERNAL; + mb.clock_control_regs__pps_out_enb = 0; + mb.clock_control_regs__tcxo_enb = 1; + mb.clock_control_regs__gpsdo_pwr = 1; + this->update_clock_control(mb); + + //Create clock control mb.clock = x300_clock_ctrl::make(mb.zpu_spi, 1 /*slaveno*/, hw_rev, @@ -782,13 +782,13 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) UHD_MSG(status) << "Initializing time to the GPSDO time" << std::endl; const time_t tp = time_t(mb.gps->get_sensor("gps_time").to_int()+1); _tree->access<time_spec_t>(mb_path / "time" / "pps").set(time_spec_t(tp)); + boost::this_thread::sleep(boost::posix_time::seconds(1)); //wait for time to be set } else { _tree->access<std::string>(mb_path / "clock_source" / "value").set("internal"); _tree->access<std::string>(mb_path / "time_source" / "value").set("internal"); UHD_MSG(status) << "References initialized to internal sources" << std::endl; } } - } x300_impl::~x300_impl(void) @@ -1317,7 +1317,11 @@ void x300_impl::update_clock_source(mboard_members_t &mb, const std::string &sou this->update_clock_control(mb); - //check for lock - poll every 10 ms for up to 1 second + //reset the clock control + //without this, the lock time is multiple seconds and the poll below will fail + mb.clock->reset(); + + //check for lock - poll every 100 ms for up to 1 second for (int i = 0; i < 10; i++) { boost::this_thread::sleep(boost::posix_time::milliseconds(100)); |