diff options
Diffstat (limited to 'host/lib')
| -rw-r--r-- | host/lib/usrp/usrp_e/clock_ctrl.cpp | 11 |
1 files changed, 7 insertions, 4 deletions
diff --git a/host/lib/usrp/usrp_e/clock_ctrl.cpp b/host/lib/usrp/usrp_e/clock_ctrl.cpp index b53e880a2..22578a933 100644 --- a/host/lib/usrp/usrp_e/clock_ctrl.cpp +++ b/host/lib/usrp/usrp_e/clock_ctrl.cpp @@ -38,11 +38,13 @@ template <typename div_type, typename bypass_type> static void set_clock_divider /*********************************************************************** * Constants **********************************************************************/ -static const double ref_clock_rate = 10e6; +static const bool enable_test_clock = false; +static const double ref_clock_doubler = 2; //enabled below +static const double ref_clock_rate = 10e6 * ref_clock_doubler; static const size_t r_counter = 1; static const size_t a_counter = 0; -static const size_t b_counter = 20; +static const size_t b_counter = 20 / ref_clock_doubler; static const size_t prescaler = 8; //set below with enum, set to 8 when input is under 2400 MHz static const size_t vco_divider = 1; //set below with enum @@ -64,6 +66,7 @@ public: //init the clock gen registers //Note: out0 should already be clocking the FPGA or this isnt going to work _ad9522_regs.sdo_active = ad9522_regs_t::SDO_ACTIVE_SDO_SDIO; + _ad9522_regs.enable_clock_doubler = 1; //enable ref clock doubler _ad9522_regs.enb_stat_eeprom_at_stat_pin = 0; //use status pin _ad9522_regs.status_pin_control = 0x1; //n divider _ad9522_regs.ld_pin_control = 0x00; //dld @@ -79,7 +82,7 @@ public: _ad9522_regs.prescaler_p = ad9522_regs_t::PRESCALER_P_DIV8_9; _ad9522_regs.pll_power_down = ad9522_regs_t::PLL_POWER_DOWN_NORMAL; - _ad9522_regs.cp_current = ad9522_regs_t::CP_CURRENT_3_0MA; + _ad9522_regs.cp_current = ad9522_regs_t::CP_CURRENT_1_2MA; _ad9522_regs.vco_calibration_now = 1; //calibrate it! _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV1; @@ -103,7 +106,7 @@ public: //setup test clock (same divider as codec clock) _ad9522_regs.out4_format = ad9522_regs_t::OUT4_FORMAT_CMOS; - _ad9522_regs.out4_cmos_configuration = (true)? + _ad9522_regs.out4_cmos_configuration = (enable_test_clock)? ad9522_regs_t::OUT4_CMOS_CONFIGURATION_A_ON : ad9522_regs_t::OUT4_CMOS_CONFIGURATION_OFF; |