diff options
Diffstat (limited to 'host/lib')
29 files changed, 1606 insertions, 403 deletions
diff --git a/host/lib/CMakeLists.txt b/host/lib/CMakeLists.txt index ff7f2c0df..48fee5a80 100644 --- a/host/lib/CMakeLists.txt +++ b/host/lib/CMakeLists.txt @@ -50,13 +50,13 @@ SET(libuhd_sources gain_handler.cpp load_modules.cpp types.cpp + utils.cpp wax.cpp transport/convert_types.cpp transport/if_addrs.cpp transport/udp_simple.cpp - usrp/dboard/db_basic_and_lf.cpp - usrp/dboard/db_rfx.cpp usrp/dboard_base.cpp + usrp/dboard_eeprom.cpp usrp/simple_usrp.cpp usrp/dboard_manager.cpp usrp/tune_helper.cpp @@ -66,11 +66,18 @@ SET(libuhd_sources # Generate Files ######################################################################## MACRO(UHD_PYTHON_GEN_SOURCE_FILE pyfile outfile) + #ensure that the directory exists for outfile + GET_FILENAME_COMPONENT(outfile_dir ${outfile} PATH) + FILE(MAKE_DIRECTORY ${outfile_dir}) + + #make the outfile depend on the python script ADD_CUSTOM_COMMAND( OUTPUT ${outfile} DEPENDS ${pyfile} COMMAND ${PYTHON_EXECUTABLE} ${pyfile} ${outfile} - COMMENT "Calling ${pyfile} to generate ${outfile}" + COMMENT "Generating ${outfile}" ) + + #make libuhd depend on the outfile LIST(APPEND libuhd_sources ${outfile}) ENDMACRO(UHD_PYTHON_GEN_SOURCE_FILE) @@ -96,6 +103,29 @@ UHD_PYTHON_GEN_SOURCE_FILE( ${CMAKE_CURRENT_BINARY_DIR}/ic_reg_maps/ad9777_regs.hpp ) +UHD_PYTHON_GEN_SOURCE_FILE( + ${CMAKE_CURRENT_SOURCE_DIR}/ic_reg_maps/gen_ad5624_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/ic_reg_maps/ad5624_regs.hpp +) + +UHD_PYTHON_GEN_SOURCE_FILE( + ${CMAKE_CURRENT_SOURCE_DIR}/ic_reg_maps/gen_ad7922_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/ic_reg_maps/ad7922_regs.hpp +) + +UHD_PYTHON_GEN_SOURCE_FILE( + ${CMAKE_CURRENT_SOURCE_DIR}/ic_reg_maps/gen_max2829_regs.py + ${CMAKE_CURRENT_BINARY_DIR}/ic_reg_maps/max2829_regs.hpp +) + +######################################################################## +# Add dboard sources +######################################################################## +LIST(APPEND libuhd_sources + usrp/dboard/db_basic_and_lf.cpp + usrp/dboard/db_rfx.cpp + usrp/dboard/db_xcvr2450.cpp +) ######################################################################## # Add usrp2 sources diff --git a/host/lib/device.cpp b/host/lib/device.cpp index 0197a6232..706f64951 100644 --- a/host/lib/device.cpp +++ b/host/lib/device.cpp @@ -132,8 +132,8 @@ device::sptr device::make(const device_addr_t &hint, size_t which){ //try to find an existing device try{ - ASSERT_THROW(hash_to_device.has_key(dev_hash)); - ASSERT_THROW(not hash_to_device[dev_hash].expired()); + UHD_ASSERT_THROW(hash_to_device.has_key(dev_hash)); + UHD_ASSERT_THROW(not hash_to_device[dev_hash].expired()); return hash_to_device[dev_hash].lock(); } //create and register a new device diff --git a/host/lib/ic_reg_maps/.gitignore b/host/lib/ic_reg_maps/.gitignore new file mode 100644 index 000000000..a74b07aee --- /dev/null +++ b/host/lib/ic_reg_maps/.gitignore @@ -0,0 +1 @@ +/*.pyc diff --git a/host/lib/ic_reg_maps/common.py b/host/lib/ic_reg_maps/common.py new file mode 100644 index 000000000..d05470706 --- /dev/null +++ b/host/lib/ic_reg_maps/common.py @@ -0,0 +1,60 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +import re +import math +from Cheetah.Template import Template + +def parse_tmpl(_tmpl_text, **kwargs): + return str(Template(_tmpl_text, kwargs)) + +class reg: + def __init__(self, reg_des): + x = re.match('^(\w*)\s*(\w*)\[(.*)\]\s*(\w*)\s*(.*)$', reg_des) + name, addr, bit_range, default, enums = x.groups() + + #store variables + self._name = name + self._addr = int(addr, 16) + if ':' in bit_range: self._addr_spec = sorted(map(int, bit_range.split(':'))) + else: self._addr_spec = int(bit_range), int(bit_range) + self._default = int(default, 16) + + #extract enum + self._enums = list() + if enums: + enum_val = 0 + for enum_str in map(str.strip, enums.split(',')): + if '=' in enum_str: + enum_name, enum_val = enum_str.split('=') + enum_val = int(enum_val) + else: enum_name = enum_str + self._enums.append((enum_name, enum_val)) + enum_val += 1 + + def get_addr(self): return self._addr + def get_enums(self): return self._enums + def get_name(self): return self._name + def get_default(self): + for key, val in self.get_enums(): + if val == self._default: return str.upper('%s_%s'%(self.get_name(), key)) + return self._default + def get_stdint_type(self):\ + return 'uint%d_t'%max(2**math.ceil(math.log(self.get_bit_width(), 2)), 8) + def get_shift(self): return self._addr_spec[0] + def get_mask(self): return hex(int('1'*self.get_bit_width(), 2)) + def get_bit_width(self): return self._addr_spec[1] - self._addr_spec[0] + 1 diff --git a/host/lib/ic_reg_maps/gen_ad5624_regs.py b/host/lib/ic_reg_maps/gen_ad5624_regs.py new file mode 100755 index 000000000..9e8ae5be5 --- /dev/null +++ b/host/lib/ic_reg_maps/gen_ad5624_regs.py @@ -0,0 +1,82 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +import sys +from common import * + +######################################################################## +# Template for raw text data describing registers +# name addr[bit range inclusive] default optional enums +######################################################################## +REGS_DATA_TMPL="""\ +data 0[4:15] 0 +addr 0[16:18] 0 DAC_A=0, DAC_B=1, DAC_C=2, DAC_D=3, ALL=7 +cmd 0[19:21] 0 wr_input_n, up_dac_n, wr_input_n_up_all, wr_up_dac_chan_n, power_down, reset, load_ldac +""" + +######################################################################## +# Header and Source templates below +######################################################################## +HEADER_TEXT=""" +#import time + +/*********************************************************************** + * This file was generated by $file on $time.strftime("%c") + **********************************************************************/ + +\#ifndef INCLUDED_AD5624_REGS_HPP +\#define INCLUDED_AD5624_REGS_HPP + +\#include <boost/cstdint.hpp> + +struct ad5624_regs_t{ +#for $reg in $regs + #if $reg.get_enums() + enum $(reg.get_name())_t{ + #for $i, $enum in enumerate($reg.get_enums()) + #set $end_comma = ',' if $i < len($reg.get_enums())-1 else '' + $(reg.get_name().upper())_$(enum[0].upper()) = $enum[1]$end_comma + #end for + } $reg.get_name(); + #else + boost::$reg.get_stdint_type() $reg.get_name(); + #end if +#end for + + ad5624_regs_t(void){ +#for $reg in $regs + $reg.get_name() = $reg.get_default(); +#end for + } + + boost::uint32_t get_reg(void){ + boost::uint32_t reg = 0; + #for $reg in filter(lambda r: r.get_addr() == 0, $regs) + reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + return reg; + } + +}; + +\#endif /* INCLUDED_AD5624_REGS_HPP */ +""" + +if __name__ == '__main__': + regs = map(reg, parse_tmpl(REGS_DATA_TMPL).splitlines()) + open(sys.argv[1], 'w').write(parse_tmpl(HEADER_TEXT, regs=regs, file=__file__)) diff --git a/host/lib/ic_reg_maps/gen_ad7922_regs.py b/host/lib/ic_reg_maps/gen_ad7922_regs.py new file mode 100755 index 000000000..23f28c0da --- /dev/null +++ b/host/lib/ic_reg_maps/gen_ad7922_regs.py @@ -0,0 +1,88 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +import sys +from common import * + +######################################################################## +# Template for raw text data describing registers +# name addr[bit range inclusive] default optional enums +######################################################################## +REGS_DATA_TMPL="""\ +result 0[0:11] 0 +mod 0[12] 0 +chn 0[13] 0 +""" + +######################################################################## +# Header and Source templates below +######################################################################## +HEADER_TEXT=""" +#import time + +/*********************************************************************** + * This file was generated by $file on $time.strftime("%c") + **********************************************************************/ + +\#ifndef INCLUDED_AD7922_REGS_HPP +\#define INCLUDED_AD7922_REGS_HPP + +\#include <boost/cstdint.hpp> + +struct ad7922_regs_t{ +#for $reg in $regs + #if $reg.get_enums() + enum $(reg.get_name())_t{ + #for $i, $enum in enumerate($reg.get_enums()) + #set $end_comma = ',' if $i < len($reg.get_enums())-1 else '' + $(reg.get_name().upper())_$(enum[0].upper()) = $enum[1]$end_comma + #end for + } $reg.get_name(); + #else + boost::$reg.get_stdint_type() $reg.get_name(); + #end if +#end for + + ad7922_regs_t(void){ +#for $reg in $regs + $reg.get_name() = $reg.get_default(); +#end for + } + + boost::uint16_t get_reg(void){ + boost::uint16_t reg = 0; + #for $reg in filter(lambda r: r.get_addr() == 0, $regs) + reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + return reg; + } + + void set_reg(boost::uint16_t reg){ + #for $reg in filter(lambda r: r.get_addr() == 0, $regs) + $reg.get_name() = (reg >> $reg.get_shift()) & $reg.get_mask(); + #end for + } + +}; + +\#endif /* INCLUDED_AD7922_REGS_HPP */ +""" + +if __name__ == '__main__': + regs = map(reg, parse_tmpl(REGS_DATA_TMPL).splitlines()) + open(sys.argv[1], 'w').write(parse_tmpl(HEADER_TEXT, regs=regs, file=__file__)) diff --git a/host/lib/ic_reg_maps/gen_ad9510_regs.py b/host/lib/ic_reg_maps/gen_ad9510_regs.py index 90230b8f9..2dc19c691 100755 --- a/host/lib/ic_reg_maps/gen_ad9510_regs.py +++ b/host/lib/ic_reg_maps/gen_ad9510_regs.py @@ -1,32 +1,23 @@ #!/usr/bin/env python # -# Copyright 2008,2009 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either asversion 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. -# +# # You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# -import re -import os import sys -from Cheetah.Template import Template -def parse_tmpl(_tmpl_text, **kwargs): - return str(Template(_tmpl_text, kwargs)) -def safe_makedirs(path): - not os.path.isdir(path) and os.makedirs(path) +from common import * ######################################################################## # Template for raw text data describing registers @@ -177,48 +168,6 @@ struct ad9510_regs_t{ \#endif /* INCLUDED_AD9510_REGS_HPP */ """ -class reg: - def __init__(self, reg_des): - x = re.match('^(\w*)\s*(\w*)\[(.*)\]\s*(\w*)\s*(.*)$', reg_des) - name, addr, bit_range, default, enums = x.groups() - - #store variables - self._name = name - self._addr = int(addr, 16) - if ':' in bit_range: self._addr_spec = map(int, bit_range.split(':')) - else: self._addr_spec = int(bit_range), int(bit_range) - self._default = int(default, 16) - - #extract enum - self._enums = list() - if enums: - enum_val = 0 - for enum_str in map(str.strip, enums.split(',')): - if '=' in enum_str: - enum_name, enum_val = enum_str.split('=') - enum_val = int(enum_val) - else: enum_name = enum_str - self._enums.append((enum_name, enum_val)) - enum_val += 1 - - def get_addr(self): return self._addr - def get_enums(self): return self._enums - def get_name(self): return self._name - def get_default(self): - for key, val in self.get_enums(): - if val == self._default: return str.upper('%s_%s'%(self.get_name(), key)) - return self._default - def get_stdint_type(self): - if self.get_bit_width() <= 8: return 'uint8_t' - if self.get_bit_width() <= 16: return 'uint16_t' - if self.get_bit_width() <= 32: return 'uint32_t' - if self.get_bit_width() <= 64: return 'uint64_t' - raise Exception, 'too damn big' - def get_shift(self): return self._addr_spec[0] - def get_mask(self): return hex(int('1'*self.get_bit_width(), 2)) - def get_bit_width(self): return self._addr_spec[1] - self._addr_spec[0] + 1 - if __name__ == '__main__': regs = map(reg, parse_tmpl(REGS_DATA_TMPL).splitlines()) - safe_makedirs(os.path.dirname(sys.argv[1])) open(sys.argv[1], 'w').write(parse_tmpl(HEADER_TEXT, regs=regs, file=__file__)) diff --git a/host/lib/ic_reg_maps/gen_ad9777_regs.py b/host/lib/ic_reg_maps/gen_ad9777_regs.py index 6077b61b6..2ac73efcf 100644..100755 --- a/host/lib/ic_reg_maps/gen_ad9777_regs.py +++ b/host/lib/ic_reg_maps/gen_ad9777_regs.py @@ -1,32 +1,23 @@ #!/usr/bin/env python # -# Copyright 2008,2009 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either asversion 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. -# +# # You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# -import re -import os import sys -from Cheetah.Template import Template -def parse_tmpl(_tmpl_text, **kwargs): - return str(Template(_tmpl_text, kwargs)) -def safe_makedirs(path): - not os.path.isdir(path) and os.makedirs(path) +from common import * ######################################################################## # Template for raw text data describing registers @@ -155,48 +146,6 @@ struct ad9777_regs_t{ \#endif /* INCLUDED_AD9777_REGS_HPP */ """ -class reg: - def __init__(self, reg_des): - x = re.match('^(\w*)\s*(\w*)\[(.*)\]\s*(\w*)\s*(.*)$', reg_des) - name, addr, bit_range, default, enums = x.groups() - - #store variables - self._name = name - self._addr = int(addr, 16) - if ':' in bit_range: self._addr_spec = sorted(map(int, bit_range.split(':'))) - else: self._addr_spec = int(bit_range), int(bit_range) - self._default = int(default, 16) - - #extract enum - self._enums = list() - if enums: - enum_val = 0 - for enum_str in map(str.strip, enums.split(',')): - if '=' in enum_str: - enum_name, enum_val = enum_str.split('=') - enum_val = int(enum_val) - else: enum_name = enum_str - self._enums.append((enum_name, enum_val)) - enum_val += 1 - - def get_addr(self): return self._addr - def get_enums(self): return self._enums - def get_name(self): return self._name - def get_default(self): - for key, val in self.get_enums(): - if val == self._default: return str.upper('%s_%s'%(self.get_name(), key)) - return self._default - def get_stdint_type(self): - if self.get_bit_width() <= 8: return 'uint8_t' - if self.get_bit_width() <= 16: return 'uint16_t' - if self.get_bit_width() <= 32: return 'uint32_t' - if self.get_bit_width() <= 64: return 'uint64_t' - raise Exception, 'too damn big' - def get_shift(self): return self._addr_spec[0] - def get_mask(self): return hex(int('1'*self.get_bit_width(), 2)) - def get_bit_width(self): return self._addr_spec[1] - self._addr_spec[0] + 1 - if __name__ == '__main__': regs = map(reg, parse_tmpl(REGS_DATA_TMPL).splitlines()) - safe_makedirs(os.path.dirname(sys.argv[1])) open(sys.argv[1], 'w').write(parse_tmpl(HEADER_TEXT, regs=regs, file=__file__)) diff --git a/host/lib/ic_reg_maps/gen_adf4360_regs.py b/host/lib/ic_reg_maps/gen_adf4360_regs.py index bcad1ffd3..478e471a3 100755 --- a/host/lib/ic_reg_maps/gen_adf4360_regs.py +++ b/host/lib/ic_reg_maps/gen_adf4360_regs.py @@ -1,32 +1,23 @@ #!/usr/bin/env python # -# Copyright 2008,2009 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either asversion 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. -# +# # You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# -import re -import os import sys -from Cheetah.Template import Template -def parse_tmpl(_tmpl_text, **kwargs): - return str(Template(_tmpl_text, kwargs)) -def safe_makedirs(path): - not os.path.isdir(path) and os.makedirs(path) +from common import * ######################################################################## # Template for raw text data describing registers @@ -126,48 +117,6 @@ struct adf4360_regs_t{ \#endif /* INCLUDED_ADF4360_REGS_HPP */ """ -class reg: - def __init__(self, reg_des): - x = re.match('^(\w*)\s*(\w*)\[(.*)\]\s*(\w*)\s*(.*)$', reg_des) - name, addr, bit_range, default, enums = x.groups() - - #store variables - self._name = name - self._addr = int(addr) - if ':' in bit_range: self._addr_spec = map(int, bit_range.split(':')) - else: self._addr_spec = int(bit_range), int(bit_range) - self._default = int(default) - - #extract enum - self._enums = list() - if enums: - enum_val = 0 - for enum_str in map(str.strip, enums.split(',')): - if '=' in enum_str: - enum_name, enum_val = enum_str.split('=') - enum_val = int(enum_val) - else: enum_name = enum_str - self._enums.append((enum_name, enum_val)) - enum_val += 1 - - def get_addr(self): return self._addr - def get_enums(self): return self._enums - def get_name(self): return self._name - def get_default(self): - for key, val in self.get_enums(): - if val == self._default: return str.upper('%s_%s'%(self.get_name(), key)) - return self._default - def get_stdint_type(self): - if self.get_bit_width() <= 8: return 'uint8_t' - if self.get_bit_width() <= 16: return 'uint16_t' - if self.get_bit_width() <= 32: return 'uint32_t' - if self.get_bit_width() <= 64: return 'uint64_t' - raise Exception, 'too damn big' - def get_shift(self): return self._addr_spec[0] - def get_mask(self): return hex(int('1'*self.get_bit_width(), 2)) - def get_bit_width(self): return self._addr_spec[1] - self._addr_spec[0] + 1 - if __name__ == '__main__': regs = map(reg, parse_tmpl(REGS_DATA_TMPL).splitlines()) - safe_makedirs(os.path.dirname(sys.argv[1])) open(sys.argv[1], 'w').write(parse_tmpl(HEADER_TEXT, regs=regs, file=__file__)) diff --git a/host/lib/ic_reg_maps/gen_max2829_regs.py b/host/lib/ic_reg_maps/gen_max2829_regs.py new file mode 100755 index 000000000..7fef302a8 --- /dev/null +++ b/host/lib/ic_reg_maps/gen_max2829_regs.py @@ -0,0 +1,166 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +import sys +from common import * + +######################################################################## +# Template for raw text data describing registers +# name addr[bit range inclusive] default optional enums +######################################################################## +REGS_DATA_TMPL="""\ +######################################################################## +## Note: offsets given from perspective of data bits (excludes address) +######################################################################## +## +######################################################################## +## Standby (2) +######################################################################## +_set_to_1_2_0 2[0] 1 +_set_to_1_2_1 2[1] 1 +_set_to_1_2_2 2[2] 1 +pa_bias_dac 2[10] 0 +voltage_ref 2[11] 0 +_set_to_1_2_12 2[12] 1 +mimo_select 2[13] 0 normal, mimo +######################################################################## +## Integer Divider Ratio (3) +######################################################################## +int_div_ratio_word 3[0:7] a2 +frac_div_ratio_lsb 3[12:13] 0 +######################################################################## +## Fractional Divider Ratio (4) +######################################################################## +frac_div_ratio_msb 4[0:13] 0 +######################################################################## +## Band Select and PLL (5) +######################################################################## +band_select 5[0] 0 2_4ghz, 5ghz +ref_divider 5[1:3] 1 +pll_cp_select 5[5] 1 2ma, 4ma +band_select_802_11a 5[6] 0 4_9ghz_to_5_35ghz, 5_47ghz_to_5_875ghz +vco_bandswitch 5[7] 0 disable, automatic +vco_spi_bandswitch 5[8] 0 fsm, spi +vco_sub_band 5[9:10] 0 +_set_to_1_5_11 5[11] 1 +_set_to_1_5_12 5[12] 1 +band_sel_mimo 5[13] 0 normal, mimo +######################################################################## +## Calibration (6) +######################################################################## +rx_cal_mode 6[0] 0 dis, enb +tx_cal_mode 6[1] 0 dis, enb +_set_to_1_6_10 6[10] 1 +iq_cal_gain 6[11:12] 3 8db, 18db, 24db, 34db +######################################################################## +## Lowpass Filter (7) +######################################################################## +rx_lpf_fine_adj 7[0:2] 2 90, 95, 100, 105, 110 +rx_lpf_coarse_adj 7[3:4] 1 7_5mhz, 9_5mhz, 14mhz, 18mhz +tx_lpf_coarse_adj 7[5:6] 1 12mhz=1, 18mhz=2, 24mhz=3 +rssi_high_bw 7[11] 0 2mhz, 6mhz +######################################################################## +## Rx Control/RSSI (8) +######################################################################## +_set_to_1_8_0 8[0] 1 +rx_highpass 8[2] 1 100hz, 30khz +_set_to_1_8_5 8[5] 1 +rssi_pin_fcn 8[8] 0 rssi, temp +rssi_op_mode 8[10] 0 rssi_rxhp, enabled +rssi_output_range 8[11] 0 low, high +rx_vga_gain_spi 8[12] 0 io, spi +######################################################################## +## Tx Linearity/Baseband Gain (9) +######################################################################## +tx_baseband_gain 9[0:1] 0 0db, 2db, 3_5db, 5db +tx_upconv_linearity 9[2:3] 0 50, 63, 78, 100 +tx_vga_linearity 9[6:7] 0 50, 63, 78, 100 +pa_driver_linearity 9[8:9] 2 50, 63, 78, 100 +tx_vga_gain_spi 9[10] 0 io, spi +######################################################################## +## PA Bias DAC (10) +######################################################################## +pa_bias_dac_out_curr a[0:5] 0 +pa_bias_dac_delay a[6:9] f +######################################################################## +## Rx Gain (11) +######################################################################## +rx_vga_gain b[0:4] 1f +rx_lna_gain b[5:6] 3 +######################################################################## +## Tx VGA Gain (12) +######################################################################## +tx_vga_gain c[0:5] 0 +""" + +######################################################################## +# Header and Source templates below +######################################################################## +HEADER_TEXT=""" +#import time + +/*********************************************************************** + * This file was generated by $file on $time.strftime("%c") + **********************************************************************/ + +\#ifndef INCLUDED_MAX2829_REGS_HPP +\#define INCLUDED_MAX2829_REGS_HPP + +\#include <boost/cstdint.hpp> + +struct max2829_regs_t{ +#for $reg in $regs + #if $reg.get_enums() + enum $(reg.get_name())_t{ + #for $i, $enum in enumerate($reg.get_enums()) + #set $end_comma = ',' if $i < len($reg.get_enums())-1 else '' + $(reg.get_name().upper())_$(enum[0].upper()) = $enum[1]$end_comma + #end for + } $reg.get_name(); + #else + boost::$reg.get_stdint_type() $reg.get_name(); + #end if +#end for + + max2829_regs_t(void){ +#for $reg in $regs + $reg.get_name() = $reg.get_default(); +#end for + } + + boost::uint32_t get_reg(boost::uint8_t addr){ + boost::uint16_t reg = 0; + switch(addr){ + #for $addr in range(2, 12+1) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + reg |= (boost::uint16_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + break; + #end for + } + return (boost::uint32_t(reg) << 4) | (addr & 0xf); + } +}; + +\#endif /* INCLUDED_MAX2829_REGS_HPP */ +""" + +if __name__ == '__main__': + regs = map(reg, parse_tmpl(REGS_DATA_TMPL).splitlines()) + open(sys.argv[1], 'w').write(parse_tmpl(HEADER_TEXT, regs=regs, file=__file__)) diff --git a/host/lib/transport/convert_types.cpp b/host/lib/transport/convert_types.cpp index 2a6854f50..8c3d6b17a 100644 --- a/host/lib/transport/convert_types.cpp +++ b/host/lib/transport/convert_types.cpp @@ -19,6 +19,7 @@ #include <uhd/utils/assert.hpp> #include <boost/asio.hpp> //endianness conversion #include <boost/cstdint.hpp> +#include <complex> using namespace uhd; @@ -109,7 +110,7 @@ void transport::convert_io_type_to_otw_type( size_t num_samps ){ //all we handle for now: - ASSERT_THROW(otw_type.width == 16 and otw_type.byteorder == otw_type_t::BO_BIG_ENDIAN); + UHD_ASSERT_THROW(otw_type.width == 16 and otw_type.byteorder == otw_type_t::BO_BIG_ENDIAN); switch(io_type.tid){ case io_type_t::COMPLEX_FLOAT32: @@ -129,7 +130,7 @@ void transport::convert_otw_type_to_io_type( size_t num_samps ){ //all we handle for now: - ASSERT_THROW(otw_type.width == 16 and otw_type.byteorder == otw_type_t::BO_BIG_ENDIAN); + UHD_ASSERT_THROW(otw_type.width == 16 and otw_type.byteorder == otw_type_t::BO_BIG_ENDIAN); switch(io_type.tid){ case io_type_t::COMPLEX_FLOAT32: diff --git a/host/lib/types.cpp b/host/lib/types.cpp index 0fd2522cf..14f7651d4 100644 --- a/host/lib/types.cpp +++ b/host/lib/types.cpp @@ -25,11 +25,14 @@ #include <uhd/types/mac_addr.hpp> #include <uhd/types/otw_type.hpp> #include <uhd/types/io_type.hpp> +#include <uhd/types/serial.hpp> #include <boost/algorithm/string.hpp> #include <boost/math/special_functions/round.hpp> #include <boost/foreach.hpp> #include <boost/format.hpp> #include <boost/cstdint.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/thread.hpp> #include <stdexcept> #include <complex> @@ -102,9 +105,9 @@ tx_metadata_t::tx_metadata_t(void){ /*********************************************************************** * time spec **********************************************************************/ -time_spec_t::time_spec_t(boost::uint32_t new_secs, double new_nsecs){ - secs = new_secs; - nsecs = new_nsecs; +time_spec_t::time_spec_t(boost::uint32_t secs_, double nsecs_){ + secs = secs_; + nsecs = nsecs_; } boost::uint32_t time_spec_t::get_ticks(double tick_rate) const{ @@ -118,46 +121,44 @@ void time_spec_t::set_ticks(boost::uint32_t ticks, double tick_rate){ /*********************************************************************** * device addr **********************************************************************/ -std::string device_addr_t::to_string(void) const{ - std::stringstream ss; - BOOST_FOREACH(std::string key, this->keys()){ - ss << boost::format("%s: %s") % key % (*this)[key] << std::endl; - } - return ss.str(); -} - -static const std::string arg_delim = ";"; +static const std::string arg_delim = ","; static const std::string pair_delim = "="; static std::string trim(const std::string &in){ return boost::algorithm::trim_copy(in); } -std::string device_addr_t::to_args_str(void) const{ - std::string args_str; - BOOST_FOREACH(const std::string &key, this->keys()){ - args_str += key + pair_delim + (*this)[key] + arg_delim; - } - return args_str; -} - -device_addr_t device_addr_t::from_args_str(const std::string &args_str){ - device_addr_t addr; - +device_addr_t::device_addr_t(const std::string &args){ //split the args at the semi-colons std::vector<std::string> pairs; - boost::split(pairs, args_str, boost::is_any_of(arg_delim)); + boost::split(pairs, args, boost::is_any_of(arg_delim)); BOOST_FOREACH(const std::string &pair, pairs){ if (trim(pair) == "") continue; //split the key value pairs at the equals std::vector<std::string> key_val; boost::split(key_val, pair, boost::is_any_of(pair_delim)); - if (key_val.size() != 2) throw std::runtime_error("invalid args string: "+args_str); - addr[trim(key_val[0])] = trim(key_val[1]); + if (key_val.size() != 2) throw std::runtime_error("invalid args string: "+args); + (*this)[trim(key_val[0])] = trim(key_val[1]); } +} + +std::string device_addr_t::to_string(void) const{ + if (this->size() == 0) return "Empty Device Address"; - return addr; + std::stringstream ss; + BOOST_FOREACH(std::string key, this->keys()){ + ss << boost::format("%s: %s") % key % (*this)[key] << std::endl; + } + return ss.str(); +} + +std::string device_addr_t::to_args_str(void) const{ + std::string args_str; + BOOST_FOREACH(const std::string &key, this->keys()){ + args_str += key + pair_delim + (*this)[key] + arg_delim; + } + return args_str; } /*********************************************************************** @@ -243,3 +244,38 @@ io_type_t::io_type_t(size_t size) : size(size), tid(CUSTOM_TYPE){ /* NOP */ } + +/*********************************************************************** + * serial + **********************************************************************/ +spi_config_t::spi_config_t(edge_t edge){ + mosi_edge = edge; + miso_edge = edge; +} + +void i2c_iface::write_eeprom( + boost::uint8_t addr, + boost::uint8_t offset, + const byte_vector_t &bytes +){ + for (size_t i = 0; i < bytes.size(); i++){ + //write a byte at a time, its easy that way + byte_vector_t cmd = boost::assign::list_of(offset+i)(bytes[i]); + this->write_i2c(addr, cmd); + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); //worst case write + } +} + +byte_vector_t i2c_iface::read_eeprom( + boost::uint8_t addr, + boost::uint8_t offset, + size_t num_bytes +){ + byte_vector_t bytes; + for (size_t i = 0; i < num_bytes; i++){ + //do a zero byte write to start read cycle + this->write_i2c(addr, byte_vector_t(1, offset+i)); + bytes.push_back(this->read_i2c(addr, 1).at(0)); + } + return bytes; +} diff --git a/host/lib/usrp/dboard/db_basic_and_lf.cpp b/host/lib/usrp/dboard/db_basic_and_lf.cpp index aad2398d8..b0fbbd2ec 100644 --- a/host/lib/usrp/dboard/db_basic_and_lf.cpp +++ b/host/lib/usrp/dboard/db_basic_and_lf.cpp @@ -153,6 +153,12 @@ void basic_rx::rx_get(const wax::obj &key_, wax::obj &val){ case SUBDEV_PROP_USE_LO_OFFSET: val = false; return; + + case SUBDEV_PROP_LO_LOCKED: + val = true; //there is no LO, so it must be true! + return; + + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -164,19 +170,17 @@ void basic_rx::rx_set(const wax::obj &key_, const wax::obj &val){ switch(key.as<subdev_prop_t>()){ case SUBDEV_PROP_GAIN: - ASSERT_THROW(val.as<float>() == float(0)); + UHD_ASSERT_THROW(val.as<float>() == float(0)); return; case SUBDEV_PROP_ANTENNA: - ASSERT_THROW(val.as<std::string>() == std::string("")); + UHD_ASSERT_THROW(val.as<std::string>() == std::string("")); return; case SUBDEV_PROP_FREQ: return; // it wont do you much good, but you can set it - default: throw std::runtime_error(str(boost::format( - "Error: trying to set read-only property on %s subdev" - ) % dboard_id::to_string(get_rx_id()))); + default: UHD_THROW_PROP_SET_ERROR(); } } @@ -248,6 +252,12 @@ void basic_tx::tx_get(const wax::obj &key_, wax::obj &val){ case SUBDEV_PROP_USE_LO_OFFSET: val = false; return; + + case SUBDEV_PROP_LO_LOCKED: + val = true; //there is no LO, so it must be true! + return; + + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -259,18 +269,16 @@ void basic_tx::tx_set(const wax::obj &key_, const wax::obj &val){ switch(key.as<subdev_prop_t>()){ case SUBDEV_PROP_GAIN: - ASSERT_THROW(val.as<float>() == float(0)); + UHD_ASSERT_THROW(val.as<float>() == float(0)); return; case SUBDEV_PROP_ANTENNA: - ASSERT_THROW(val.as<std::string>() == std::string("")); + UHD_ASSERT_THROW(val.as<std::string>() == std::string("")); return; case SUBDEV_PROP_FREQ: return; // it wont do you much good, but you can set it - default: throw std::runtime_error(str(boost::format( - "Error: trying to set read-only property on %s subdev" - ) % dboard_id::to_string(get_tx_id()))); + default: UHD_THROW_PROP_SET_ERROR(); } } diff --git a/host/lib/usrp/dboard/db_rfx.cpp b/host/lib/usrp/dboard/db_rfx.cpp index cd5b8447b..175f55eab 100644 --- a/host/lib/usrp/dboard/db_rfx.cpp +++ b/host/lib/usrp/dboard/db_rfx.cpp @@ -94,6 +94,15 @@ private: * \return the actual frequency in Hz */ double set_lo_freq(dboard_iface::unit_t unit, double target_freq); + + /*! + * Get the lock detect status of the LO. + * \param unit which unit rx or tx + * \return true for locked + */ + bool get_locked(dboard_iface::unit_t unit){ + return (this->get_iface()->read_gpio(unit) & LOCKDET_MASK) != 0; + } }; /*********************************************************************** @@ -192,7 +201,7 @@ void rfx_xcvr::set_tx_lo_freq(double freq){ void rfx_xcvr::set_rx_ant(const std::string &ant){ //validate input - ASSERT_THROW(ant == "TX/RX" or ant == "RX2"); + UHD_ASSERT_THROW(ant == "TX/RX" or ant == "RX2"); //set the rx atr regs that change with antenna setting this->get_iface()->set_atr_reg( @@ -350,12 +359,12 @@ void rfx_xcvr::rx_get(const wax::obj &key_, wax::obj &val){ return; case SUBDEV_PROP_GAIN: - ASSERT_THROW(name == "PGA0"); + UHD_ASSERT_THROW(name == "PGA0"); val = _rx_pga0_gain; return; case SUBDEV_PROP_GAIN_RANGE: - ASSERT_THROW(name == "PGA0"); + UHD_ASSERT_THROW(name == "PGA0"); val = gain_range_t(0, _max_rx_pga0_gain, float(0.022)); return; @@ -396,6 +405,12 @@ void rfx_xcvr::rx_get(const wax::obj &key_, wax::obj &val){ case SUBDEV_PROP_USE_LO_OFFSET: val = false; return; + + case SUBDEV_PROP_LO_LOCKED: + val = this->get_locked(dboard_iface::UNIT_RX); + return; + + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -411,7 +426,7 @@ void rfx_xcvr::rx_set(const wax::obj &key_, const wax::obj &val){ return; case SUBDEV_PROP_GAIN: - ASSERT_THROW(name == "PGA0"); + UHD_ASSERT_THROW(name == "PGA0"); set_rx_pga0_gain(val.as<float>()); return; @@ -419,10 +434,7 @@ void rfx_xcvr::rx_set(const wax::obj &key_, const wax::obj &val){ set_rx_ant(val.as<std::string>()); return; - default: - throw std::runtime_error(str(boost::format( - "Error: trying to set read-only property on %s subdev" - ) % dboard_id::to_string(get_rx_id()))); + default: UHD_THROW_PROP_SET_ERROR(); } } @@ -430,7 +442,7 @@ void rfx_xcvr::rx_set(const wax::obj &key_, const wax::obj &val){ * TX Get and Set **********************************************************************/ void rfx_xcvr::tx_get(const wax::obj &key_, wax::obj &val){ - wax::obj key; std::string name; + wax::obj key; std::string name; boost::tie(key, name) = extract_named_prop(key_); //handle the get request conditioned on the key @@ -486,6 +498,12 @@ void rfx_xcvr::tx_get(const wax::obj &key_, wax::obj &val){ case SUBDEV_PROP_USE_LO_OFFSET: val = true; return; + + case SUBDEV_PROP_LO_LOCKED: + val = this->get_locked(dboard_iface::UNIT_TX); + return; + + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -506,12 +524,9 @@ void rfx_xcvr::tx_set(const wax::obj &key_, const wax::obj &val){ case SUBDEV_PROP_ANTENNA: //its always set to tx/rx, so we only allow this value - ASSERT_THROW(val.as<std::string>() == "TX/RX"); + UHD_ASSERT_THROW(val.as<std::string>() == "TX/RX"); return; - default: - throw std::runtime_error(str(boost::format( - "Error: trying to set read-only property on %s subdev" - ) % dboard_id::to_string(get_tx_id()))); + default: UHD_THROW_PROP_SET_ERROR(); } } diff --git a/host/lib/usrp/dboard/db_xcvr2450.cpp b/host/lib/usrp/dboard/db_xcvr2450.cpp new file mode 100644 index 000000000..0dfef2a0a --- /dev/null +++ b/host/lib/usrp/dboard/db_xcvr2450.cpp @@ -0,0 +1,627 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +// TX IO Pins +#define HB_PA_OFF_TXIO (1 << 15) // 5GHz PA, 1 = off, 0 = on +#define LB_PA_OFF_TXIO (1 << 14) // 2.4GHz PA, 1 = off, 0 = on +#define ANTSEL_TX1_RX2_TXIO (1 << 13) // 1 = Ant 1 to TX, Ant 2 to RX +#define ANTSEL_TX2_RX1_TXIO (1 << 12) // 1 = Ant 2 to TX, Ant 1 to RX +#define TX_EN_TXIO (1 << 11) // 1 = TX on, 0 = TX off +#define AD9515DIV_TXIO (1 << 4) // 1 = Div by 3, 0 = Div by 2 + +#define TXIO_MASK (HB_PA_OFF_TXIO | LB_PA_OFF_TXIO | ANTSEL_TX1_RX2_TXIO | ANTSEL_TX2_RX1_TXIO | TX_EN_TXIO | AD9515DIV_TXIO) + +// TX IO Functions +#define HB_PA_TXIO LB_PA_OFF_TXIO +#define LB_PA_TXIO HB_PA_OFF_TXIO +#define TX_ENB_TXIO TX_EN_TXIO +#define TX_DIS_TXIO 0 +#define AD9515DIV_3_TXIO AD9515DIV_TXIO +#define AD9515DIV_2_TXIO 0 + +// RX IO Pins +#define LOCKDET_RXIO (1 << 15) // This is an INPUT!!! +#define POWER_RXIO (1 << 14) // 1 = power on, 0 = shutdown +#define RX_EN_RXIO (1 << 13) // 1 = RX on, 0 = RX off +#define RX_HP_RXIO (1 << 12) // 0 = Fc set by rx_hpf, 1 = 600 KHz + +#define RXIO_MASK (POWER_RXIO | RX_EN_RXIO | RX_HP_RXIO) + +// RX IO Functions +#define POWER_UP_RXIO POWER_RXIO +#define POWER_DOWN_RXIO 0 +#define RX_ENB_RXIO RX_EN_RXIO +#define RX_DIS_RXIO 0 + +#include "max2829_regs.hpp" +#include <uhd/utils/static.hpp> +#include <uhd/utils/assert.hpp> +#include <uhd/utils/algorithm.hpp> +#include <uhd/types/ranges.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/usrp/dboard_base.hpp> +#include <uhd/usrp/dboard_manager.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <boost/math/special_functions/round.hpp> +#include <utility> + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +/*********************************************************************** + * The XCVR 2450 constants + **********************************************************************/ +static const bool xcvr2450_debug = false; + +static const freq_range_t xcvr_freq_range(2.4e9, 6.0e9); + +static const prop_names_t xcvr_antennas = list_of("J1")("J2"); + +static const uhd::dict<std::string, gain_range_t> xcvr_tx_gain_ranges = map_list_of + ("VGA", gain_range_t(0, 30, 0.5)) + ("BB", gain_range_t(0, 5, 1.5)) +; +static const uhd::dict<std::string, gain_range_t> xcvr_rx_gain_ranges = map_list_of + ("LNA", gain_range_t(0, 30.5, 15)) + ("VGA", gain_range_t(0, 62, 2.0)) +; + +/*********************************************************************** + * The XCVR 2450 dboard class + **********************************************************************/ +class xcvr2450 : public xcvr_dboard_base{ +public: + xcvr2450(ctor_args_t const& args); + ~xcvr2450(void); + + void rx_get(const wax::obj &key, wax::obj &val); + void rx_set(const wax::obj &key, const wax::obj &val); + + void tx_get(const wax::obj &key, wax::obj &val); + void tx_set(const wax::obj &key, const wax::obj &val); + +private: + double _lo_freq; + uhd::dict<std::string, float> _tx_gains, _rx_gains; + std::string _tx_ant, _rx_ant; + int _ad9515div; + max2829_regs_t _max2829_regs; + + void set_lo_freq(double target_freq); + void set_tx_ant(const std::string &ant); + void set_rx_ant(const std::string &ant); + void set_tx_gain(float gain, const std::string &name); + void set_rx_gain(float gain, const std::string &name); + + void update_atr(void); + void spi_reset(void); + void send_reg(boost::uint8_t addr){ + boost::uint32_t value = _max2829_regs.get_reg(addr); + if(xcvr2450_debug) std::cerr << boost::format( + "XCVR2450: send reg 0x%02x, value 0x%05x" + ) % int(addr) % value << std::endl; + this->get_iface()->write_spi( + dboard_iface::UNIT_RX, + spi_config_t::EDGE_RISE, + value, 24 + ); + } + + static bool is_highband(double freq){return freq > 3e9;} + + /*! + * Is the LO locked? + * \return true for locked + */ + bool get_locked(void){ + return (this->get_iface()->read_gpio(dboard_iface::UNIT_RX) & LOCKDET_RXIO) != 0; + } + + /*! + * Read the RSSI from the aux adc + * \return the rssi in dB + */ + float get_rssi(void){ + //constants for the rssi calculation + static const float min_v = float(0.5), max_v = float(2.5); + static const float rssi_dyn_range = 60; + //calculate the rssi from the voltage + float voltage = this->get_iface()->read_aux_adc(dboard_iface::UNIT_RX, 1); + return rssi_dyn_range*(voltage - min_v)/(max_v - min_v); + } +}; + +/*********************************************************************** + * Register the XCVR 2450 dboard + **********************************************************************/ +static dboard_base::sptr make_xcvr2450(dboard_base::ctor_args_t const& args){ + return dboard_base::sptr(new xcvr2450(args)); +} + +UHD_STATIC_BLOCK(reg_xcvr2450_dboard){ + //register the factory function for the rx and tx dbids + dboard_manager::register_dboard(0x0060, &make_xcvr2450, "XCVR2450 TX"); + dboard_manager::register_dboard(0x0061, &make_xcvr2450, "XCVR2450 RX"); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +xcvr2450::xcvr2450(ctor_args_t const& args) : xcvr_dboard_base(args){ + //enable only the clocks we need + this->get_iface()->set_clock_enabled(dboard_iface::UNIT_TX, true); + + //set the gpio directions + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, TXIO_MASK); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, RXIO_MASK); + + spi_reset(); //prepare the spi + + //setup the misc max2829 registers + _max2829_regs.mimo_select = max2829_regs_t::MIMO_SELECT_MIMO; + _max2829_regs.band_sel_mimo = max2829_regs_t::BAND_SEL_MIMO_MIMO; + _max2829_regs.pll_cp_select = max2829_regs_t::PLL_CP_SELECT_4MA; + _max2829_regs.rssi_high_bw = max2829_regs_t::RSSI_HIGH_BW_6MHZ; + _max2829_regs.tx_lpf_coarse_adj = max2829_regs_t::TX_LPF_COARSE_ADJ_12MHZ; + _max2829_regs.rx_lpf_coarse_adj = max2829_regs_t::RX_LPF_COARSE_ADJ_9_5MHZ; + _max2829_regs.rx_lpf_fine_adj = max2829_regs_t::RX_LPF_FINE_ADJ_95; + _max2829_regs.rx_vga_gain_spi = max2829_regs_t::RX_VGA_GAIN_SPI_SPI; + _max2829_regs.rssi_output_range = max2829_regs_t::RSSI_OUTPUT_RANGE_HIGH; + _max2829_regs.rssi_op_mode = max2829_regs_t::RSSI_OP_MODE_ENABLED; + _max2829_regs.rssi_pin_fcn = max2829_regs_t::RSSI_PIN_FCN_RSSI; + _max2829_regs.rx_highpass = max2829_regs_t::RX_HIGHPASS_100HZ; + _max2829_regs.tx_vga_gain_spi = max2829_regs_t::TX_VGA_GAIN_SPI_SPI; + _max2829_regs.pa_driver_linearity = max2829_regs_t::PA_DRIVER_LINEARITY_78; + _max2829_regs.tx_vga_linearity = max2829_regs_t::TX_VGA_LINEARITY_78; + _max2829_regs.tx_upconv_linearity = max2829_regs_t::TX_UPCONV_LINEARITY_78; + + //send initial register settings + for(boost::uint8_t reg = 0x2; reg <= 0xC; reg++){ + this->send_reg(reg); + } + + //set defaults for LO, gains, antennas + set_lo_freq(2.45e9); + set_rx_ant(xcvr_antennas.at(0)); + set_tx_ant(xcvr_antennas.at(1)); + BOOST_FOREACH(const std::string &name, xcvr_tx_gain_ranges.keys()){ + set_tx_gain(xcvr_tx_gain_ranges[name].min, name); + } + BOOST_FOREACH(const std::string &name, xcvr_rx_gain_ranges.keys()){ + set_rx_gain(xcvr_rx_gain_ranges[name].min, name); + } +} + +xcvr2450::~xcvr2450(void){ + spi_reset(); +} + +void xcvr2450::spi_reset(void){ + //spi reset mode: global enable = off, tx and rx enable = on + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, TX_ENB_TXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, RX_ENB_RXIO | POWER_DOWN_RXIO); + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); + + //take it back out of spi reset mode and wait a bit + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, RX_DIS_RXIO | POWER_UP_RXIO); + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); +} + +void xcvr2450::update_atr(void){ + //calculate tx atr pins + int band_sel = (xcvr2450::is_highband(_lo_freq))? HB_PA_TXIO : LB_PA_TXIO; + int tx_ant_sel = (_tx_ant == "J1")? ANTSEL_TX1_RX2_TXIO : ANTSEL_TX2_RX1_TXIO; + int rx_ant_sel = (_rx_ant == "J2")? ANTSEL_TX1_RX2_TXIO : ANTSEL_TX2_RX1_TXIO; + int xx_ant_sel = tx_ant_sel; //prefer the tx antenna selection for full duplex (rx will get the other antenna) + int ad9515div = (_ad9515div == 3)? AD9515DIV_3_TXIO : AD9515DIV_2_TXIO; + + //set the tx registers + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, band_sel | ad9515div | TX_DIS_TXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, band_sel | ad9515div | TX_DIS_TXIO | rx_ant_sel); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, band_sel | ad9515div | TX_ENB_TXIO | tx_ant_sel); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, band_sel | ad9515div | TX_ENB_TXIO | xx_ant_sel); + + //set the rx registers + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, POWER_UP_RXIO | RX_DIS_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, POWER_UP_RXIO | RX_ENB_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, POWER_UP_RXIO | RX_DIS_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, POWER_UP_RXIO | RX_ENB_RXIO); +} + +/*********************************************************************** + * Tuning + **********************************************************************/ +void xcvr2450::set_lo_freq(double target_freq){ + target_freq = std::clip(target_freq, xcvr_freq_range.min, xcvr_freq_range.max); + //TODO: clip for highband and lowband + + //variables used in the calculation below + double scaler = xcvr2450::is_highband(target_freq)? (4.0/5.0) : (4.0/3.0); + double ref_freq = this->get_iface()->get_clock_rate(dboard_iface::UNIT_TX); + int R, intdiv, fracdiv; + + //loop through values until we get a match + for(_ad9515div = 2; _ad9515div <= 3; _ad9515div++){ + for(R = 1; R <= 7; R++){ + double N = (target_freq*scaler*R*_ad9515div)/ref_freq; + intdiv = int(std::floor(N)); + fracdiv = boost::math::iround((N - intdiv)*double(1 << 16)); + //actual minimum is 128, but most chips seems to require higher to lock + if (intdiv < 131 or intdiv > 255) continue; + //constraints met: exit loop + goto done_loop; + } + } done_loop: + + //calculate the actual freq from the values above + double N = double(intdiv) + double(fracdiv)/double(1 << 16); + _lo_freq = (N*ref_freq)/(scaler*R*_ad9515div); + + if (xcvr2450_debug) std::cerr + << boost::format("XCVR2450 tune:\n") + << boost::format(" R=%d, N=%f, ad9515=%d, scaler=%f\n") % R % N % _ad9515div % scaler + << boost::format(" Ref Freq=%fMHz\n") % (ref_freq/1e6) + << boost::format(" Target Freq=%fMHz\n") % (target_freq/1e6) + << boost::format(" Actual Freq=%fMHz\n") % (_lo_freq/1e6) + << std::endl; + + //high-high band or low-high band? + if(_lo_freq > (5.35e9 + 5.47e9)/2.0){ + if (xcvr2450_debug) std::cerr << "XCVR2450 tune: Using high-high band" << std::endl; + _max2829_regs.band_select_802_11a = max2829_regs_t::BAND_SELECT_802_11A_5_47GHZ_TO_5_875GHZ; + }else{ + if (xcvr2450_debug) std::cerr << "XCVR2450 tune: Using low-high band" << std::endl; + _max2829_regs.band_select_802_11a = max2829_regs_t::BAND_SELECT_802_11A_4_9GHZ_TO_5_35GHZ; + } + + //new band select settings and ad9515 divider + this->update_atr(); + + //load new counters into registers + _max2829_regs.int_div_ratio_word = intdiv; + _max2829_regs.frac_div_ratio_lsb = fracdiv & 0x3; + _max2829_regs.frac_div_ratio_msb = fracdiv >> 2; + this->send_reg(0x3); //integer + this->send_reg(0x4); //fractional + + //load the reference divider and band select into registers + //toggle the bandswitch from off to automatic (which really means start) + _max2829_regs.ref_divider = R; + _max2829_regs.band_select = (xcvr2450::is_highband(_lo_freq))? + max2829_regs_t::BAND_SELECT_5GHZ : + max2829_regs_t::BAND_SELECT_2_4GHZ ; + _max2829_regs.vco_bandswitch = max2829_regs_t::VCO_BANDSWITCH_DISABLE; + this->send_reg(0x5); + _max2829_regs.vco_bandswitch = max2829_regs_t::VCO_BANDSWITCH_AUTOMATIC;; + this->send_reg(0x5); +} + +/*********************************************************************** + * Antenna Handling + **********************************************************************/ +void xcvr2450::set_tx_ant(const std::string &ant){ + assert_has(xcvr_antennas, ant, "xcvr antenna name"); + _tx_ant = ant; + this->update_atr(); //sets the atr to the new antenna setting +} + +void xcvr2450::set_rx_ant(const std::string &ant){ + assert_has(xcvr_antennas, ant, "xcvr antenna name"); + _rx_ant = ant; + this->update_atr(); //sets the atr to the new antenna setting +} + +/*********************************************************************** + * Gain Handling + **********************************************************************/ +/*! + * Convert a requested gain for the tx vga into the integer register value. + * The gain passed into the function will be set to the actual value. + * \param gain the requested gain in dB + * \return 6 bit the register value + */ +static int gain_to_tx_vga_reg(float &gain){ + //calculate the register value + int reg = std::clip(boost::math::iround(gain*60/30.0) + 3, 0, 63); + + //calculate the actual gain value + if (reg < 4) gain = 0; + else if (reg < 48) gain = float(reg/2 - 1); + else gain = float(reg/2.0 - 1.5); + + //return register value + return reg; +} + +/*! + * Convert a requested gain for the tx bb into the integer register value. + * The gain passed into the function will be set to the actual value. + * \param gain the requested gain in dB + * \return gain enum value + */ +static max2829_regs_t::tx_baseband_gain_t gain_to_tx_bb_reg(float &gain){ + int reg = std::clip(boost::math::iround(gain*3/5.0), 0, 3); + switch(reg){ + case 0: + gain = 0; + return max2829_regs_t::TX_BASEBAND_GAIN_0DB; + case 1: + gain = 2; + return max2829_regs_t::TX_BASEBAND_GAIN_2DB; + case 2: + gain = 3.5; + return max2829_regs_t::TX_BASEBAND_GAIN_3_5DB; + case 3: + gain = 5; + return max2829_regs_t::TX_BASEBAND_GAIN_5DB; + } + BOOST_THROW_EXCEPTION(std::runtime_error("should not get here")); + return max2829_regs_t::TX_BASEBAND_GAIN_0DB; +} + +/*! + * Convert a requested gain for the rx vga into the integer register value. + * The gain passed into the function will be set to the actual value. + * \param gain the requested gain in dB + * \return 5 bit the register value + */ +static int gain_to_rx_vga_reg(float &gain){ + int reg = std::clip(boost::math::iround(gain/2.0), 0, 31); + gain = float(reg*2); + return reg; +} + +/*! + * Convert a requested gain for the rx lna into the integer register value. + * The gain passed into the function will be set to the actual value. + * \param gain the requested gain in dB + * \return 2 bit the register value + */ +static int gain_to_rx_lna_reg(float &gain){ + int reg = std::clip(boost::math::iround(gain*2/30.5) + 1, 0, 3); + switch(reg){ + case 0: + case 1: gain = 0; break; + case 2: gain = 15; break; + case 3: gain = 30.5; break; + } + return reg; +} + +void xcvr2450::set_tx_gain(float gain, const std::string &name){ + assert_has(xcvr_tx_gain_ranges.keys(), name, "xcvr tx gain name"); + if (name == "VGA"){ + _max2829_regs.tx_vga_gain = gain_to_tx_vga_reg(gain); + send_reg(0xC); + } + else if(name == "BB"){ + _max2829_regs.tx_baseband_gain = gain_to_tx_bb_reg(gain); + send_reg(0x9); + } + else UHD_ASSERT_THROW(false); + _tx_gains[name] = gain; +} + +void xcvr2450::set_rx_gain(float gain, const std::string &name){ + assert_has(xcvr_rx_gain_ranges.keys(), name, "xcvr rx gain name"); + if (name == "VGA"){ + _max2829_regs.rx_vga_gain = gain_to_rx_vga_reg(gain); + send_reg(0xB); + } + else if(name == "LNA"){ + _max2829_regs.rx_lna_gain = gain_to_rx_lna_reg(gain); + send_reg(0xB); + } + else UHD_ASSERT_THROW(false); + _rx_gains[name] = gain; +} + +/*********************************************************************** + * RX Get and Set + **********************************************************************/ +void xcvr2450::rx_get(const wax::obj &key_, wax::obj &val){ + wax::obj key; std::string name; + boost::tie(key, name) = extract_named_prop(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = dboard_id::to_string(get_rx_id()); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + assert_has(_rx_gains.keys(), name, "xcvr rx gain name"); + val = _rx_gains[name]; + return; + + case SUBDEV_PROP_GAIN_RANGE: + assert_has(xcvr_rx_gain_ranges.keys(), name, "xcvr rx gain name"); + val = xcvr_rx_gain_ranges[name]; + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(xcvr_rx_gain_ranges.keys()); + return; + + case SUBDEV_PROP_FREQ: + val = _lo_freq; + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = xcvr_freq_range; + return; + + case SUBDEV_PROP_ANTENNA: + val = _rx_ant; + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = xcvr_antennas; + return; + + case SUBDEV_PROP_QUADRATURE: + val = true; + return; + + case SUBDEV_PROP_IQ_SWAPPED: + val = false; + return; + + case SUBDEV_PROP_SPECTRUM_INVERTED: + val = false; + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_LO_LOCKED: + val = this->get_locked(); + return; + + case SUBDEV_PROP_RSSI: + val = this->get_rssi(); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void xcvr2450::rx_set(const wax::obj &key_, const wax::obj &val){ + wax::obj key; std::string name; + boost::tie(key, name) = extract_named_prop(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + this->set_lo_freq(val.as<double>()); + return; + + case SUBDEV_PROP_GAIN: + this->set_rx_gain(val.as<float>(), name); + return; + + case SUBDEV_PROP_ANTENNA: + this->set_rx_ant(val.as<std::string>()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX Get and Set + **********************************************************************/ +void xcvr2450::tx_get(const wax::obj &key_, wax::obj &val){ + wax::obj key; std::string name; + boost::tie(key, name) = extract_named_prop(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = dboard_id::to_string(get_tx_id()); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + assert_has(_tx_gains.keys(), name, "xcvr tx gain name"); + val = _tx_gains[name]; + return; + + case SUBDEV_PROP_GAIN_RANGE: + assert_has(xcvr_tx_gain_ranges.keys(), name, "xcvr tx gain name"); + val = xcvr_tx_gain_ranges[name]; + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(xcvr_tx_gain_ranges.keys()); + return; + + case SUBDEV_PROP_FREQ: + val = _lo_freq; + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = xcvr_freq_range; + return; + + case SUBDEV_PROP_ANTENNA: + val = _tx_ant; + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = xcvr_antennas; + return; + + case SUBDEV_PROP_QUADRATURE: + val = true; + return; + + case SUBDEV_PROP_IQ_SWAPPED: + val = true; + return; + + case SUBDEV_PROP_SPECTRUM_INVERTED: + val = false; + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_LO_LOCKED: + val = this->get_locked(); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void xcvr2450::tx_set(const wax::obj &key_, const wax::obj &val){ + wax::obj key; std::string name; + boost::tie(key, name) = extract_named_prop(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + set_lo_freq(val.as<double>()); + return; + + case SUBDEV_PROP_GAIN: + this->set_tx_gain(val.as<float>(), name); + return; + + case SUBDEV_PROP_ANTENNA: + this->set_tx_ant(val.as<std::string>()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/dboard_eeprom.cpp b/host/lib/usrp/dboard_eeprom.cpp new file mode 100644 index 000000000..54e7a4fd9 --- /dev/null +++ b/host/lib/usrp/dboard_eeprom.cpp @@ -0,0 +1,102 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/usrp/dboard_eeprom.hpp> +#include <uhd/utils/assert.hpp> +#include <boost/format.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; + +static const bool _dboard_eeprom_debug = false; + +//////////////////////////////////////////////////////////////////////// +// format of daughterboard EEPROM +// 00: 0xDB code for ``I'm a daughterboard'' +// 01: .. Daughterboard ID (LSB) +// 02: .. Daughterboard ID (MSB) +// 03: .. io bits 7-0 direction (bit set if it's an output from m'board) +// 04: .. io bits 15-8 direction (bit set if it's an output from m'board) +// 05: .. ADC0 DC offset correction (LSB) +// 06: .. ADC0 DC offset correction (MSB) +// 07: .. ADC1 DC offset correction (LSB) +// 08: .. ADC1 DC offset correction (MSB) +// ... +// 1f: .. negative of the sum of bytes [0x00, 0x1e] + +#define DB_EEPROM_MAGIC 0x00 +#define DB_EEPROM_MAGIC_VALUE 0xDB +#define DB_EEPROM_ID_LSB 0x01 +#define DB_EEPROM_ID_MSB 0x02 +#define DB_EEPROM_OE_LSB 0x03 +#define DB_EEPROM_OE_MSB 0x04 +#define DB_EEPROM_OFFSET_0_LSB 0x05 // offset correction for ADC or DAC 0 +#define DB_EEPROM_OFFSET_0_MSB 0x06 +#define DB_EEPROM_OFFSET_1_LSB 0x07 // offset correction for ADC or DAC 1 +#define DB_EEPROM_OFFSET_1_MSB 0x08 +#define DB_EEPROM_CHKSUM 0x1f + +#define DB_EEPROM_CLEN 0x20 // length of common portion of eeprom + +#define DB_EEPROM_CUSTOM_BASE DB_EEPROM_CLEN // first avail offset for + // daughterboard specific use +//////////////////////////////////////////////////////////////////////// + +//negative sum of bytes excluding checksum byte +static boost::uint8_t checksum(const byte_vector_t &bytes){ + int sum = 0; + for (size_t i = 0; i < std::min(bytes.size(), size_t(DB_EEPROM_CHKSUM)); i++){ + sum -= int(bytes.at(i)); + } + if (_dboard_eeprom_debug) + std::cout << boost::format("sum: 0x%02x") % sum << std::endl; + return boost::uint8_t(sum); +} + +dboard_eeprom_t::dboard_eeprom_t(const byte_vector_t &bytes){ + if (_dboard_eeprom_debug){ + for (size_t i = 0; i < bytes.size(); i++){ + std::cout << boost::format( + "eeprom byte[0x%02x] = 0x%02x") % i % int(bytes.at(i) + ) << std::endl; + } + } + try{ + UHD_ASSERT_THROW(bytes.size() >= DB_EEPROM_CLEN); + UHD_ASSERT_THROW(bytes[DB_EEPROM_MAGIC] == DB_EEPROM_MAGIC_VALUE); + UHD_ASSERT_THROW(bytes[DB_EEPROM_CHKSUM] == checksum(bytes)); + id = \ + (boost::uint16_t(bytes[DB_EEPROM_ID_LSB]) << 0) | + (boost::uint16_t(bytes[DB_EEPROM_ID_MSB]) << 8) ; + }catch(const uhd::assert_error &){ + id = dboard_id::NONE; + } +} + +byte_vector_t dboard_eeprom_t::get_eeprom_bytes(void){ + byte_vector_t bytes(DB_EEPROM_CLEN, 0); //defaults to all zeros + bytes[DB_EEPROM_MAGIC] = DB_EEPROM_MAGIC_VALUE; + bytes[DB_EEPROM_ID_LSB] = boost::uint8_t(id >> 0); + bytes[DB_EEPROM_ID_MSB] = boost::uint8_t(id >> 8); + bytes[DB_EEPROM_CHKSUM] = checksum(bytes); + return bytes; +} + +size_t dboard_eeprom_t::num_bytes(void){ + return DB_EEPROM_CLEN; +} diff --git a/host/lib/usrp/dboard_manager.cpp b/host/lib/usrp/dboard_manager.cpp index 06f8c55b6..390c1d3c9 100644 --- a/host/lib/usrp/dboard_manager.cpp +++ b/host/lib/usrp/dboard_manager.cpp @@ -177,10 +177,11 @@ static args_t get_dboard_args( //verify that there is a registered constructor for this id if (not get_id_to_args_map().has_key(dboard_id)){ - throw std::runtime_error(str( + /*throw std::runtime_error(str( boost::format("Unregistered %s dboard id: %s") % xx_type % dboard_id::to_string(dboard_id) - )); + ));*/ + return get_dboard_args(dboard_id::NONE, xx_type); } //return the dboard args for this id @@ -205,7 +206,7 @@ dboard_manager_impl::dboard_manager_impl( //make xcvr subdevs (make one subdev for both rx and tx dboards) if (rx_dboard_ctor == tx_dboard_ctor){ - ASSERT_THROW(rx_subdevs == tx_subdevs); + UHD_ASSERT_THROW(rx_subdevs == tx_subdevs); BOOST_FOREACH(const std::string &subdev, rx_subdevs){ dboard_base::sptr xcvr_dboard = rx_dboard_ctor( dboard_base::ctor_args_t(subdev, iface, rx_dboard_id, tx_dboard_id) diff --git a/host/lib/usrp/simple_usrp.cpp b/host/lib/usrp/simple_usrp.cpp index 11ee3a798..a8c104485 100644 --- a/host/lib/usrp/simple_usrp.cpp +++ b/host/lib/usrp/simple_usrp.cpp @@ -42,14 +42,14 @@ public: _tx_dsp = _mboard[MBOARD_PROP_TX_DSP]; //extract rx subdevice - wax::obj rx_dboard = _mboard[MBOARD_PROP_RX_DBOARD]; - std::string rx_subdev_in_use = rx_dboard[DBOARD_PROP_USED_SUBDEVS].as<prop_names_t>().at(0); - _rx_subdev = rx_dboard[named_prop_t(DBOARD_PROP_SUBDEV, rx_subdev_in_use)]; + _rx_dboard = _mboard[MBOARD_PROP_RX_DBOARD]; + std::string rx_subdev_in_use = _rx_dboard[DBOARD_PROP_USED_SUBDEVS].as<prop_names_t>().at(0); + _rx_subdev = _rx_dboard[named_prop_t(DBOARD_PROP_SUBDEV, rx_subdev_in_use)]; //extract tx subdevice - wax::obj tx_dboard = _mboard[MBOARD_PROP_TX_DBOARD]; - std::string tx_subdev_in_use = tx_dboard[DBOARD_PROP_USED_SUBDEVS].as<prop_names_t>().at(0); - _tx_subdev = tx_dboard[named_prop_t(DBOARD_PROP_SUBDEV, tx_subdev_in_use)]; + _tx_dboard = _mboard[MBOARD_PROP_TX_DBOARD]; + std::string tx_subdev_in_use = _tx_dboard[DBOARD_PROP_USED_SUBDEVS].as<prop_names_t>().at(0); + _tx_subdev = _tx_dboard[named_prop_t(DBOARD_PROP_SUBDEV, tx_subdev_in_use)]; } ~simple_usrp_impl(void){ @@ -61,7 +61,26 @@ public: } std::string get_name(void){ - return _mboard[MBOARD_PROP_NAME].as<std::string>(); + return str(boost::format( + "Simple USRP:\n" + " Device: %s\n" + " Mboard: %s\n" + " RX DSP: %s\n" + " RX Dboard: %s\n" + " RX Subdev: %s\n" + " TX DSP: %s\n" + " TX Dboard: %s\n" + " TX Subdev: %s\n" + ) + % (*_dev)[DEVICE_PROP_NAME].as<std::string>() + % _mboard[MBOARD_PROP_NAME].as<std::string>() + % _rx_dsp[DSP_PROP_NAME].as<std::string>() + % _rx_dboard[DBOARD_PROP_NAME].as<std::string>() + % _rx_subdev[SUBDEV_PROP_NAME].as<std::string>() + % _tx_dsp[DSP_PROP_NAME].as<std::string>() + % _tx_dboard[DBOARD_PROP_NAME].as<std::string>() + % _tx_subdev[SUBDEV_PROP_NAME].as<std::string>() + ); } /******************************************************************* @@ -83,6 +102,10 @@ public: _mboard[MBOARD_PROP_CLOCK_CONFIG] = clock_config; } + float read_rssi(void){ + return _rx_subdev[SUBDEV_PROP_RSSI].as<float>(); + } + /******************************************************************* * RX methods ******************************************************************/ @@ -126,6 +149,10 @@ public: return _rx_subdev[SUBDEV_PROP_ANTENNA_NAMES].as<prop_names_t>(); } + bool get_rx_lo_locked(void){ + return _rx_subdev[SUBDEV_PROP_LO_LOCKED].as<bool>(); + } + /******************************************************************* * TX methods ******************************************************************/ @@ -169,11 +196,17 @@ public: return _tx_subdev[SUBDEV_PROP_ANTENNA_NAMES].as<prop_names_t>(); } + bool get_tx_lo_locked(void){ + return _tx_subdev[SUBDEV_PROP_LO_LOCKED].as<bool>(); + } + private: device::sptr _dev; wax::obj _mboard; wax::obj _rx_dsp; wax::obj _tx_dsp; + wax::obj _rx_dboard; + wax::obj _tx_dboard; wax::obj _rx_subdev; wax::obj _tx_subdev; }; @@ -181,6 +214,6 @@ private: /*********************************************************************** * The Make Function **********************************************************************/ -simple_usrp::sptr simple_usrp::make(const std::string &args){ - return sptr(new simple_usrp_impl(device_addr_t::from_args_str(args))); +simple_usrp::sptr simple_usrp::make(const device_addr_t &dev_addr){ + return sptr(new simple_usrp_impl(dev_addr)); } diff --git a/host/lib/usrp/usrp2/clock_control.cpp b/host/lib/usrp/usrp2/clock_control.cpp index dcd7ce9da..72f1f1c7a 100644 --- a/host/lib/usrp/usrp2/clock_control.cpp +++ b/host/lib/usrp/usrp2/clock_control.cpp @@ -21,6 +21,7 @@ #include "usrp2_regs.hpp" //spi slave constants #include <boost/cstdint.hpp> +using namespace uhd; using namespace uhd::usrp; /*! diff --git a/host/lib/usrp/usrp2/dboard_iface.cpp b/host/lib/usrp/usrp2/dboard_iface.cpp index 2859a7981..74d80163c 100644 --- a/host/lib/usrp/usrp2/dboard_iface.cpp +++ b/host/lib/usrp/usrp2/dboard_iface.cpp @@ -17,14 +17,17 @@ #include "usrp2_iface.hpp" #include "clock_control.hpp" -#include "usrp2_regs.hpp" +#include "usrp2_regs.hpp" //wishbone address constants +#include <uhd/usrp/dboard_iface.hpp> #include <uhd/types/dict.hpp> #include <uhd/utils/assert.hpp> #include <boost/assign/list_of.hpp> #include <boost/asio.hpp> //htonl and ntohl #include <boost/math/special_functions/round.hpp> -#include <algorithm> +#include "ad7922_regs.hpp" //aux adc +#include "ad5624_regs.hpp" //aux dac +using namespace uhd; using namespace uhd::usrp; class usrp2_dboard_iface : public dboard_iface{ @@ -39,8 +42,8 @@ public: void set_gpio_ddr(unit_t, boost::uint16_t); boost::uint16_t read_gpio(unit_t); - void write_i2c(int, const byte_vector_t &); - byte_vector_t read_i2c(int, size_t); + void write_i2c(boost::uint8_t, const byte_vector_t &); + byte_vector_t read_i2c(boost::uint8_t, size_t); double get_clock_rate(unit_t); void set_clock_enabled(unit_t, bool); @@ -64,6 +67,9 @@ private: usrp2_iface::sptr _iface; clock_control::sptr _clk_ctrl; boost::uint32_t _ddr_shadow; + + uhd::dict<unit_t, ad5624_regs_t> _dac_regs; + void _write_aux_dac(unit_t); }; /*********************************************************************** @@ -91,6 +97,16 @@ usrp2_dboard_iface::usrp2_dboard_iface(usrp2_iface::sptr iface, clock_control::s } _iface->poke32(FR_GPIO_TX_SEL, new_sels); _iface->poke32(FR_GPIO_RX_SEL, new_sels); + + //reset the aux dacs + _dac_regs[UNIT_RX] = ad5624_regs_t(); + _dac_regs[UNIT_TX] = ad5624_regs_t(); + BOOST_FOREACH(unit_t unit, _dac_regs.keys()){ + _dac_regs[unit].data = 1; + _dac_regs[unit].addr = ad5624_regs_t::ADDR_ALL; + _dac_regs[unit].cmd = ad5624_regs_t::CMD_RESET; + this->_write_aux_dac(unit); + } } usrp2_dboard_iface::~usrp2_dboard_iface(void){ @@ -196,84 +212,67 @@ boost::uint32_t usrp2_dboard_iface::read_write_spi( /*********************************************************************** * I2C **********************************************************************/ -void usrp2_dboard_iface::write_i2c(int i2c_addr, const byte_vector_t &buf){ - //setup the out data - usrp2_ctrl_data_t out_data; - out_data.id = htonl(USRP2_CTRL_ID_WRITE_THESE_I2C_VALUES_BRO); - out_data.data.i2c_args.addr = i2c_addr; - out_data.data.i2c_args.bytes = buf.size(); - - //limitation of i2c transaction size - ASSERT_THROW(buf.size() <= sizeof(out_data.data.i2c_args.data)); - - //copy in the data - std::copy(buf.begin(), buf.end(), out_data.data.i2c_args.data); - - //send and recv - usrp2_ctrl_data_t in_data = _iface->ctrl_send_and_recv(out_data); - ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_COOL_IM_DONE_I2C_WRITE_DUDE); +void usrp2_dboard_iface::write_i2c(boost::uint8_t addr, const byte_vector_t &bytes){ + return _iface->write_i2c(addr, bytes); } -dboard_iface::byte_vector_t usrp2_dboard_iface::read_i2c(int i2c_addr, size_t num_bytes){ - //setup the out data - usrp2_ctrl_data_t out_data; - out_data.id = htonl(USRP2_CTRL_ID_DO_AN_I2C_READ_FOR_ME_BRO); - out_data.data.i2c_args.addr = i2c_addr; - out_data.data.i2c_args.bytes = num_bytes; - - //limitation of i2c transaction size - ASSERT_THROW(num_bytes <= sizeof(out_data.data.i2c_args.data)); - - //send and recv - usrp2_ctrl_data_t in_data = _iface->ctrl_send_and_recv(out_data); - ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_HERES_THE_I2C_DATA_DUDE); - ASSERT_THROW(in_data.data.i2c_args.addr = num_bytes); - - //copy out the data - byte_vector_t result(num_bytes); - std::copy(in_data.data.i2c_args.data, in_data.data.i2c_args.data + num_bytes, result.begin()); - return result; +byte_vector_t usrp2_dboard_iface::read_i2c(boost::uint8_t addr, size_t num_bytes){ + return _iface->read_i2c(addr, num_bytes); } /*********************************************************************** * Aux DAX/ADC **********************************************************************/ -/*! - * Static function to convert a unit type enum - * to an over-the-wire value for the usrp2 control. - * \param unit the dboard interface unit type enum - * \return an over the wire representation - */ -static boost::uint8_t unit_to_otw(dboard_iface::unit_t unit){ - switch(unit){ - case dboard_iface::UNIT_TX: return USRP2_DIR_TX; - case dboard_iface::UNIT_RX: return USRP2_DIR_RX; - } - throw std::invalid_argument("unknown unit type"); +void usrp2_dboard_iface::_write_aux_dac(unit_t unit){ + static const uhd::dict<unit_t, int> unit_to_spi_dac = boost::assign::map_list_of + (UNIT_RX, SPI_SS_RX_DAC) + (UNIT_TX, SPI_SS_TX_DAC) + ; + _iface->transact_spi( + unit_to_spi_dac[unit], spi_config_t::EDGE_FALL, + _dac_regs[unit].get_reg(), 24, false /*no rb*/ + ); } void usrp2_dboard_iface::write_aux_dac(unit_t unit, int which, float value){ - //setup the out data - usrp2_ctrl_data_t out_data; - out_data.id = htonl(USRP2_CTRL_ID_WRITE_THIS_TO_THE_AUX_DAC_BRO); - out_data.data.aux_args.dir = unit_to_otw(unit); - out_data.data.aux_args.which = which; - out_data.data.aux_args.value = htonl(boost::math::iround(4095*value/3.3)); - - //send and recv - usrp2_ctrl_data_t in_data = _iface->ctrl_send_and_recv(out_data); - ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_DONE_WITH_THAT_AUX_DAC_DUDE); + _dac_regs[unit].data = boost::math::iround(4095*value/3.3); + _dac_regs[unit].cmd = ad5624_regs_t::CMD_WR_UP_DAC_CHAN_N; + switch(which){ + case 0: _dac_regs[unit].addr = ad5624_regs_t::ADDR_DAC_A; break; + case 1: _dac_regs[unit].addr = ad5624_regs_t::ADDR_DAC_B; break; + case 2: _dac_regs[unit].addr = ad5624_regs_t::ADDR_DAC_C; break; + case 3: _dac_regs[unit].addr = ad5624_regs_t::ADDR_DAC_D; break; + default: throw std::runtime_error("not a possible aux dac, must be 0, 1, 2, or 3"); + } + this->_write_aux_dac(unit); } float usrp2_dboard_iface::read_aux_adc(unit_t unit, int which){ - //setup the out data - usrp2_ctrl_data_t out_data; - out_data.id = htonl(USRP2_CTRL_ID_READ_FROM_THIS_AUX_ADC_BRO); - out_data.data.aux_args.dir = unit_to_otw(unit); - out_data.data.aux_args.which = which; - - //send and recv - usrp2_ctrl_data_t in_data = _iface->ctrl_send_and_recv(out_data); - ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_DONE_WITH_THAT_AUX_ADC_DUDE); - return float(3.3*ntohl(in_data.data.aux_args.value)/4095); + static const uhd::dict<unit_t, int> unit_to_spi_adc = boost::assign::map_list_of + (UNIT_RX, SPI_SS_RX_ADC) + (UNIT_TX, SPI_SS_TX_ADC) + ; + + //setup spi config args + spi_config_t config; + config.mosi_edge = spi_config_t::EDGE_FALL; + config.miso_edge = spi_config_t::EDGE_RISE; + + //setup the spi registers + ad7922_regs_t ad7922_regs; + ad7922_regs.mod = which; //normal mode: mod == chn + ad7922_regs.chn = which; + + //write and read spi + _iface->transact_spi( + unit_to_spi_adc[unit], config, + ad7922_regs.get_reg(), 16, false /*no rb*/ + ); + ad7922_regs.set_reg(boost::uint16_t(_iface->transact_spi( + unit_to_spi_adc[unit], config, + ad7922_regs.get_reg(), 16, true /*rb*/ + ))); + + //convert to voltage and return + return float(3.3*ad7922_regs.result/4095); } diff --git a/host/lib/usrp/usrp2/dboard_impl.cpp b/host/lib/usrp/usrp2/dboard_impl.cpp index fe74219d6..403faf5cf 100644 --- a/host/lib/usrp/usrp2/dboard_impl.cpp +++ b/host/lib/usrp/usrp2/dboard_impl.cpp @@ -33,22 +33,16 @@ using namespace uhd::usrp; * Helper Methods **********************************************************************/ void usrp2_impl::dboard_init(void){ - //grab the dboard ids over the control line - usrp2_ctrl_data_t out_data; - out_data.id = htonl(USRP2_CTRL_ID_GIVE_ME_YOUR_DBOARD_IDS_BRO); - usrp2_ctrl_data_t in_data = _iface->ctrl_send_and_recv(out_data); - ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_THESE_ARE_MY_DBOARD_IDS_DUDE); - - //extract the dboard ids an convert them - dboard_id_t rx_dboard_id = ntohs(in_data.data.dboard_ids.rx_id); - dboard_id_t tx_dboard_id = ntohs(in_data.data.dboard_ids.tx_id); + //read the dboard eeprom to extract the dboard ids + _rx_db_eeprom = dboard_eeprom_t(_iface->read_eeprom(I2C_ADDR_RX_DB, 0, dboard_eeprom_t::num_bytes())); + _tx_db_eeprom = dboard_eeprom_t(_iface->read_eeprom(I2C_ADDR_TX_DB, 0, dboard_eeprom_t::num_bytes())); //create a new dboard interface and manager dboard_iface::sptr _dboard_iface( make_usrp2_dboard_iface(_iface, _clk_ctrl) ); _dboard_manager = dboard_manager::make( - rx_dboard_id, tx_dboard_id, _dboard_iface + _rx_db_eeprom.id, _tx_db_eeprom.id, _dboard_iface ); //load dboards @@ -72,7 +66,7 @@ void usrp2_impl::dboard_init(void){ void usrp2_impl::update_rx_mux_config(void){ //calculate the rx mux boost::uint32_t rx_mux = 0; - ASSERT_THROW(_rx_subdevs_in_use.size() == 1); + UHD_ASSERT_THROW(_rx_subdevs_in_use.size() == 1); wax::obj rx_subdev = _dboard_manager->get_rx_subdev(_rx_subdevs_in_use.at(0)); std::cout << "Using: " << rx_subdev[SUBDEV_PROP_NAME].as<std::string>() << std::endl; if (rx_subdev[SUBDEV_PROP_QUADRATURE].as<bool>()){ @@ -90,11 +84,11 @@ void usrp2_impl::update_rx_mux_config(void){ void usrp2_impl::update_tx_mux_config(void){ //calculate the tx mux boost::uint32_t tx_mux = 0x10; - ASSERT_THROW(_tx_subdevs_in_use.size() == 1); + UHD_ASSERT_THROW(_tx_subdevs_in_use.size() == 1); wax::obj tx_subdev = _dboard_manager->get_tx_subdev(_tx_subdevs_in_use.at(0)); std::cout << "Using: " << tx_subdev[SUBDEV_PROP_NAME].as<std::string>() << std::endl; if (tx_subdev[SUBDEV_PROP_IQ_SWAPPED].as<bool>()){ - tx_mux = (((tx_mux >> 0) & 0x1) << 1) | (((tx_mux >> 1) & 0x1) << 0); + tx_mux = (((tx_mux >> 0) & 0xf) << 4) | (((tx_mux >> 4) & 0xf) << 0); } _iface->poke32(FR_DSP_TX_MUX, tx_mux); @@ -125,19 +119,28 @@ void usrp2_impl::rx_dboard_get(const wax::obj &key_, wax::obj &val){ val = _rx_subdevs_in_use; return; - //case DBOARD_PROP_CODEC: - // throw std::runtime_error("unhandled prop in usrp2 dboard"); + case DBOARD_PROP_DBOARD_ID: + val = _rx_db_eeprom.id; + return; + + default: UHD_THROW_PROP_GET_ERROR(); } } void usrp2_impl::rx_dboard_set(const wax::obj &key, const wax::obj &val){ - if (key.as<dboard_prop_t>() == DBOARD_PROP_USED_SUBDEVS){ + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_USED_SUBDEVS: _rx_subdevs_in_use = val.as<prop_names_t>(); update_rx_mux_config(); //if the val is bad, this will throw return; - } - throw std::runtime_error("Cannot set on usrp2 dboard"); + case DBOARD_PROP_DBOARD_ID: + _rx_db_eeprom.id = val.as<dboard_id_t>(); + _iface->write_eeprom(I2C_ADDR_RX_DB, 0, _rx_db_eeprom.get_eeprom_bytes()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } } /*********************************************************************** @@ -165,17 +168,26 @@ void usrp2_impl::tx_dboard_get(const wax::obj &key_, wax::obj &val){ val = _tx_subdevs_in_use; return; - //case DBOARD_PROP_CODEC: - // throw std::runtime_error("unhandled prop in usrp2 dboard"); + case DBOARD_PROP_DBOARD_ID: + val = _tx_db_eeprom.id; + return; + + default: UHD_THROW_PROP_GET_ERROR(); } } void usrp2_impl::tx_dboard_set(const wax::obj &key, const wax::obj &val){ - if (key.as<dboard_prop_t>() == DBOARD_PROP_USED_SUBDEVS){ + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_USED_SUBDEVS: _tx_subdevs_in_use = val.as<prop_names_t>(); update_tx_mux_config(); //if the val is bad, this will throw return; - } - throw std::runtime_error("Cannot set on usrp2 dboard"); + case DBOARD_PROP_DBOARD_ID: + _tx_db_eeprom.id = val.as<dboard_id_t>(); + _iface->write_eeprom(I2C_ADDR_TX_DB, 0, _tx_db_eeprom.get_eeprom_bytes()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } } diff --git a/host/lib/usrp/usrp2/dsp_impl.cpp b/host/lib/usrp/usrp2/dsp_impl.cpp index 204277ba7..84314a656 100644 --- a/host/lib/usrp/usrp2/dsp_impl.cpp +++ b/host/lib/usrp/usrp2/dsp_impl.cpp @@ -40,7 +40,7 @@ template <class T> T log2(T num){ * DDC Helper Methods **********************************************************************/ static boost::uint32_t calculate_freq_word_and_update_actual_freq(double &freq, double clock_freq){ - ASSERT_THROW(std::abs(freq) < clock_freq/2.0); + UHD_ASSERT_THROW(std::abs(freq) < clock_freq/2.0); static const double scale_factor = std::pow(2.0, 32); //calculate the freq register word @@ -117,6 +117,8 @@ void usrp2_impl::ddc_get(const wax::obj &key, wax::obj &val){ case DSP_PROP_HOST_RATE: val = get_master_clock_freq()/_ddc_decim; return; + + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -139,8 +141,7 @@ void usrp2_impl::ddc_set(const wax::obj &key, const wax::obj &val){ } return; - default: - throw std::runtime_error("Error: trying to set read-only property on usrp2 ddc0"); + default: UHD_THROW_PROP_SET_ERROR(); } } @@ -200,6 +201,8 @@ void usrp2_impl::duc_get(const wax::obj &key, wax::obj &val){ case DSP_PROP_HOST_RATE: val = get_master_clock_freq()/_duc_interp; return; + + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -222,7 +225,6 @@ void usrp2_impl::duc_set(const wax::obj &key, const wax::obj &val){ } return; - default: - throw std::runtime_error("Error: trying to set read-only property on usrp2 duc0"); + default: UHD_THROW_PROP_SET_ERROR(); } } diff --git a/host/lib/usrp/usrp2/fw_common.h b/host/lib/usrp/usrp2/fw_common.h index b600a2a70..e80001ff2 100644 --- a/host/lib/usrp/usrp2/fw_common.h +++ b/host/lib/usrp/usrp2/fw_common.h @@ -32,6 +32,10 @@ extern "C" { #define _SINS_ #endif +//defines the protocol version in this shared header +//increment this value when the protocol is changed +#define USRP2_PROTO_VERSION 2 + //used to differentiate control packets over data port #define USRP2_INVALID_VRT_HEADER 0 @@ -57,9 +61,6 @@ typedef enum{ USRP2_CTRL_ID_THIS_IS_MY_MAC_ADDR_DUDE = 'M', USRP2_CTRL_ID_HERE_IS_A_NEW_MAC_ADDR_BRO = 'n', - USRP2_CTRL_ID_GIVE_ME_YOUR_DBOARD_IDS_BRO = 'd', - USRP2_CTRL_ID_THESE_ARE_MY_DBOARD_IDS_DUDE = 'D', - USRP2_CTRL_ID_TRANSACT_ME_SOME_SPI_BRO = 's', USRP2_CTRL_ID_OMG_TRANSACTED_SPI_DUDE = 'S', @@ -69,12 +70,6 @@ typedef enum{ USRP2_CTRL_ID_WRITE_THESE_I2C_VALUES_BRO = 'h', USRP2_CTRL_ID_COOL_IM_DONE_I2C_WRITE_DUDE = 'H', - USRP2_CTRL_ID_WRITE_THIS_TO_THE_AUX_DAC_BRO = 'x', - USRP2_CTRL_ID_DONE_WITH_THAT_AUX_DAC_DUDE = 'X', - - USRP2_CTRL_ID_READ_FROM_THIS_AUX_ADC_BRO = 'y', - USRP2_CTRL_ID_DONE_WITH_THAT_AUX_ADC_DUDE = 'Y', - USRP2_CTRL_ID_SEND_STREAM_COMMAND_FOR_ME_BRO = '{', USRP2_CTRL_ID_GOT_THAT_STREAM_COMMAND_DUDE = '}', @@ -89,26 +84,23 @@ typedef enum{ } usrp2_ctrl_id_t; typedef enum{ - USRP2_DIR_RX, - USRP2_DIR_TX + USRP2_DIR_RX = 'r', + USRP2_DIR_TX = 't' } usrp2_dir_which_t; typedef enum{ - USRP2_CLK_EDGE_RISE, - USRP2_CLK_EDGE_FALL + USRP2_CLK_EDGE_RISE = 'r', + USRP2_CLK_EDGE_FALL = 'f' } usrp2_clk_edge_t; typedef struct{ + _SINS_ uint32_t proto_ver; _SINS_ uint32_t id; _SINS_ uint32_t seq; union{ _SINS_ uint32_t ip_addr; _SINS_ uint8_t mac_addr[6]; struct { - _SINS_ uint16_t rx_id; - _SINS_ uint16_t tx_id; - } dboard_ids; - struct { _SINS_ uint8_t dev; _SINS_ uint8_t miso_edge; _SINS_ uint8_t mosi_edge; @@ -122,12 +114,6 @@ typedef struct{ _SINS_ uint8_t data[sizeof(_SINS_ uint32_t)]; } i2c_args; struct { - _SINS_ uint8_t dir; - _SINS_ uint8_t which; - _SINS_ uint8_t _pad[2]; - _SINS_ uint32_t value; - } aux_args; - struct { _SINS_ uint8_t now; //stream now? _SINS_ uint8_t continuous; //auto-reload commmands? _SINS_ uint8_t chain; diff --git a/host/lib/usrp/usrp2/mboard_impl.cpp b/host/lib/usrp/usrp2/mboard_impl.cpp index d7728238c..36bef4f25 100644 --- a/host/lib/usrp/usrp2/mboard_impl.cpp +++ b/host/lib/usrp/usrp2/mboard_impl.cpp @@ -100,6 +100,7 @@ void usrp2_impl::update_clock_config(void){ case clock_config_t::REF_INT : _iface->poke32(FR_CLOCK_CONTROL, 0x10); break; case clock_config_t::REF_SMA : _iface->poke32(FR_CLOCK_CONTROL, 0x1C); break; case clock_config_t::REF_MIMO: _iface->poke32(FR_CLOCK_CONTROL, 0x15); break; + default: throw std::runtime_error("usrp2: unhandled clock configuration reference source"); } //clock source ref 10mhz @@ -151,7 +152,7 @@ void usrp2_impl::issue_ddc_stream_cmd(const stream_cmd_t &stream_cmd){ //send and recv usrp2_ctrl_data_t in_data = _iface->ctrl_send_and_recv(out_data); - ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_GOT_THAT_STREAM_COMMAND_DUDE); + UHD_ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_GOT_THAT_STREAM_COMMAND_DUDE); } /*********************************************************************** @@ -170,7 +171,7 @@ void usrp2_impl::mboard_get(const wax::obj &key_, wax::obj &val){ //send and recv usrp2_ctrl_data_t in_data = _iface->ctrl_send_and_recv(out_data); - ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_THIS_IS_MY_MAC_ADDR_DUDE); + UHD_ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_THIS_IS_MY_MAC_ADDR_DUDE); //extract the address val = mac_addr_t::from_bytes(in_data.data.mac_addr).to_string(); @@ -184,7 +185,7 @@ void usrp2_impl::mboard_get(const wax::obj &key_, wax::obj &val){ //send and recv usrp2_ctrl_data_t in_data = _iface->ctrl_send_and_recv(out_data); - ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_THIS_IS_MY_IP_ADDR_DUDE); + UHD_ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_THIS_IS_MY_IP_ADDR_DUDE); //extract the address val = boost::asio::ip::address_v4(ntohl(in_data.data.ip_addr)).to_string(); @@ -208,7 +209,7 @@ void usrp2_impl::mboard_get(const wax::obj &key_, wax::obj &val){ return; case MBOARD_PROP_RX_DBOARD: - ASSERT_THROW(name == ""); + UHD_ASSERT_THROW(name == ""); val = _rx_dboard_proxy->get_link(); return; @@ -217,7 +218,7 @@ void usrp2_impl::mboard_get(const wax::obj &key_, wax::obj &val){ return; case MBOARD_PROP_TX_DBOARD: - ASSERT_THROW(name == ""); + UHD_ASSERT_THROW(name == ""); val = _tx_dboard_proxy->get_link(); return; @@ -226,7 +227,7 @@ void usrp2_impl::mboard_get(const wax::obj &key_, wax::obj &val){ return; case MBOARD_PROP_RX_DSP: - ASSERT_THROW(name == ""); + UHD_ASSERT_THROW(name == ""); val = _rx_dsp_proxy->get_link(); return; @@ -235,7 +236,7 @@ void usrp2_impl::mboard_get(const wax::obj &key_, wax::obj &val){ return; case MBOARD_PROP_TX_DSP: - ASSERT_THROW(name == ""); + UHD_ASSERT_THROW(name == ""); val = _tx_dsp_proxy->get_link(); return; @@ -247,9 +248,7 @@ void usrp2_impl::mboard_get(const wax::obj &key_, wax::obj &val){ val = _clock_config; return; - default: - throw std::runtime_error("Error: trying to get write-only property on usrp2 mboard"); - + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -268,7 +267,7 @@ void usrp2_impl::mboard_set(const wax::obj &key, const wax::obj &val){ //send and recv usrp2_ctrl_data_t in_data = _iface->ctrl_send_and_recv(out_data); - ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_THIS_IS_MY_MAC_ADDR_DUDE); + UHD_ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_THIS_IS_MY_MAC_ADDR_DUDE); return; } @@ -280,7 +279,7 @@ void usrp2_impl::mboard_set(const wax::obj &key, const wax::obj &val){ //send and recv usrp2_ctrl_data_t in_data = _iface->ctrl_send_and_recv(out_data); - ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_THIS_IS_MY_IP_ADDR_DUDE); + UHD_ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_THIS_IS_MY_IP_ADDR_DUDE); return; } } @@ -305,8 +304,6 @@ void usrp2_impl::mboard_set(const wax::obj &key, const wax::obj &val){ issue_ddc_stream_cmd(val.as<stream_cmd_t>()); return; - default: - throw std::runtime_error("Error: trying to set read-only property on usrp2 mboard"); - + default: UHD_THROW_PROP_SET_ERROR(); } } diff --git a/host/lib/usrp/usrp2/usrp2_iface.cpp b/host/lib/usrp/usrp2/usrp2_iface.cpp index 5c84fd8d3..e43b9678e 100644 --- a/host/lib/usrp/usrp2/usrp2_iface.cpp +++ b/host/lib/usrp/usrp2/usrp2_iface.cpp @@ -19,12 +19,13 @@ #include <uhd/utils/assert.hpp> #include <uhd/types/dict.hpp> #include <boost/thread.hpp> +#include <boost/foreach.hpp> #include <boost/asio.hpp> //used for htonl and ntohl #include <boost/assign/list_of.hpp> #include <stdexcept> +#include <algorithm> using namespace uhd; -using namespace uhd::usrp; class usrp2_iface_impl : public usrp2_iface{ public: @@ -85,9 +86,51 @@ public: //send and recv usrp2_ctrl_data_t in_data = this->ctrl_send_and_recv(out_data); - ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_OMG_TRANSACTED_SPI_DUDE); + UHD_ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_OMG_TRANSACTED_SPI_DUDE); - return ntohl(out_data.data.spi_args.data); + return ntohl(in_data.data.spi_args.data); + } + +/*********************************************************************** + * I2C + **********************************************************************/ + void write_i2c(boost::uint8_t addr, const byte_vector_t &buf){ + //setup the out data + usrp2_ctrl_data_t out_data; + out_data.id = htonl(USRP2_CTRL_ID_WRITE_THESE_I2C_VALUES_BRO); + out_data.data.i2c_args.addr = addr; + out_data.data.i2c_args.bytes = buf.size(); + + //limitation of i2c transaction size + UHD_ASSERT_THROW(buf.size() <= sizeof(out_data.data.i2c_args.data)); + + //copy in the data + std::copy(buf.begin(), buf.end(), out_data.data.i2c_args.data); + + //send and recv + usrp2_ctrl_data_t in_data = this->ctrl_send_and_recv(out_data); + UHD_ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_COOL_IM_DONE_I2C_WRITE_DUDE); + } + + byte_vector_t read_i2c(boost::uint8_t addr, size_t num_bytes){ + //setup the out data + usrp2_ctrl_data_t out_data; + out_data.id = htonl(USRP2_CTRL_ID_DO_AN_I2C_READ_FOR_ME_BRO); + out_data.data.i2c_args.addr = addr; + out_data.data.i2c_args.bytes = num_bytes; + + //limitation of i2c transaction size + UHD_ASSERT_THROW(num_bytes <= sizeof(out_data.data.i2c_args.data)); + + //send and recv + usrp2_ctrl_data_t in_data = this->ctrl_send_and_recv(out_data); + UHD_ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_HERES_THE_I2C_DATA_DUDE); + UHD_ASSERT_THROW(in_data.data.i2c_args.addr = num_bytes); + + //copy out the data + byte_vector_t result(num_bytes); + std::copy(in_data.data.i2c_args.data, in_data.data.i2c_args.data + num_bytes, result.begin()); + return result; } /*********************************************************************** @@ -98,6 +141,7 @@ public: //fill in the seq number and send usrp2_ctrl_data_t out_copy = out_data; + out_copy.proto_ver = htonl(USRP2_PROTO_VERSION); out_copy.seq = htonl(++_ctrl_seq_num); _ctrl_transport->send(boost::asio::buffer(&out_copy, sizeof(usrp2_ctrl_data_t))); @@ -105,6 +149,13 @@ public: while(true){ usrp2_ctrl_data_t in_data; size_t len = _ctrl_transport->recv(boost::asio::buffer(&in_data, sizeof(in_data))); + if(len >= sizeof(boost::uint32_t) and ntohl(in_data.proto_ver) != USRP2_PROTO_VERSION){ + throw std::runtime_error(str( + boost::format("Expected protocol version %d, but got %d\n" + "The firmware build does not match the host code build." + ) % int(USRP2_PROTO_VERSION) % ntohl(in_data.proto_ver) + )); + } if (len >= sizeof(usrp2_ctrl_data_t) and ntohl(in_data.seq) == _ctrl_seq_num){ return in_data; } @@ -142,7 +193,7 @@ private: //send and recv usrp2_ctrl_data_t in_data = this->ctrl_send_and_recv(out_data); - ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_OMG_POKED_REGISTER_SO_BAD_DUDE); + UHD_ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_OMG_POKED_REGISTER_SO_BAD_DUDE); } template <class T> T peek(boost::uint32_t addr){ @@ -154,7 +205,7 @@ private: //send and recv usrp2_ctrl_data_t in_data = this->ctrl_send_and_recv(out_data); - ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_WOAH_I_DEFINITELY_PEEKED_IT_DUDE); + UHD_ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_WOAH_I_DEFINITELY_PEEKED_IT_DUDE); return T(ntohl(out_data.data.poke_args.data)); } diff --git a/host/lib/usrp/usrp2/usrp2_iface.hpp b/host/lib/usrp/usrp2/usrp2_iface.hpp index 1298d87f1..7158c58d0 100644 --- a/host/lib/usrp/usrp2/usrp2_iface.hpp +++ b/host/lib/usrp/usrp2/usrp2_iface.hpp @@ -19,18 +19,27 @@ #define INCLUDED_USRP2_IFACE_HPP #include <uhd/transport/udp_simple.hpp> -#include <uhd/usrp/dboard_iface.hpp> //spi config +#include <uhd/types/serial.hpp> #include <boost/shared_ptr.hpp> #include <boost/utility.hpp> #include <boost/cstdint.hpp> #include "fw_common.h" +//////////////////////////////////////////////////////////////////////// +// I2C addresses +//////////////////////////////////////////////////////////////////////// +#define I2C_DEV_EEPROM 0x50 // 24LC02[45]: 7-bits 1010xxx +#define I2C_ADDR_MBOARD (I2C_DEV_EEPROM | 0x0) +#define I2C_ADDR_TX_DB (I2C_DEV_EEPROM | 0x4) +#define I2C_ADDR_RX_DB (I2C_DEV_EEPROM | 0x5) +//////////////////////////////////////////////////////////////////////// + /*! * The usrp2 interface class: * Provides a set of functions to implementation layer. * Including spi, peek, poke, control... */ -class usrp2_iface : boost::noncopyable{ +class usrp2_iface : public uhd::i2c_iface, boost::noncopyable{ public: typedef boost::shared_ptr<usrp2_iface> sptr; @@ -87,7 +96,7 @@ public: */ virtual boost::uint32_t transact_spi( int which_slave, - const uhd::usrp::spi_config_t &config, + const uhd::spi_config_t &config, boost::uint32_t data, size_t num_bits, bool readback diff --git a/host/lib/usrp/usrp2/usrp2_impl.cpp b/host/lib/usrp/usrp2/usrp2_impl.cpp index 3bdc5bd02..4079357f9 100644 --- a/host/lib/usrp/usrp2/usrp2_impl.cpp +++ b/host/lib/usrp/usrp2/usrp2_impl.cpp @@ -70,6 +70,7 @@ uhd::device_addrs_t usrp2::find(const device_addr_t &hint){ //send a hello control packet usrp2_ctrl_data_t ctrl_data_out; + ctrl_data_out.proto_ver = htonl(USRP2_PROTO_VERSION); ctrl_data_out.id = htonl(USRP2_CTRL_ID_GIVE_ME_YOUR_IP_ADDR_BRO); udp_transport->send(boost::asio::buffer(&ctrl_data_out, sizeof(ctrl_data_out))); @@ -185,7 +186,7 @@ void usrp2_impl::get(const wax::obj &key_, wax::obj &val){ return; case DEVICE_PROP_MBOARD: - ASSERT_THROW(name == ""); + UHD_ASSERT_THROW(name == ""); val = _mboard_proxy->get_link(); return; @@ -201,9 +202,10 @@ void usrp2_impl::get(const wax::obj &key_, wax::obj &val){ val = size_t(_max_tx_samples_per_packet); return; + default: UHD_THROW_PROP_GET_ERROR(); } } void usrp2_impl::set(const wax::obj &, const wax::obj &){ - throw std::runtime_error("Cannot set in usrp2 device"); + UHD_THROW_PROP_SET_ERROR(); } diff --git a/host/lib/usrp/usrp2/usrp2_impl.hpp b/host/lib/usrp/usrp2/usrp2_impl.hpp index dbcee367b..1c9387744 100644 --- a/host/lib/usrp/usrp2/usrp2_impl.hpp +++ b/host/lib/usrp/usrp2/usrp2_impl.hpp @@ -25,6 +25,7 @@ #include <uhd/types/otw_type.hpp> #include <uhd/types/stream_cmd.hpp> #include <uhd/types/clock_config.hpp> +#include <uhd/usrp/dboard_eeprom.hpp> #include <boost/shared_ptr.hpp> #include <boost/function.hpp> #include <uhd/transport/vrt.hpp> @@ -161,12 +162,14 @@ private: void rx_dboard_set(const wax::obj &, const wax::obj &); wax_obj_proxy::sptr _rx_dboard_proxy; uhd::prop_names_t _rx_subdevs_in_use; + uhd::usrp::dboard_eeprom_t _rx_db_eeprom; //properties interface for tx dboard void tx_dboard_get(const wax::obj &, wax::obj &); void tx_dboard_set(const wax::obj &, const wax::obj &); wax_obj_proxy::sptr _tx_dboard_proxy; uhd::prop_names_t _tx_subdevs_in_use; + uhd::usrp::dboard_eeprom_t _tx_db_eeprom; void update_rx_mux_config(void); void update_tx_mux_config(void); diff --git a/host/lib/utils.cpp b/host/lib/utils.cpp new file mode 100644 index 000000000..3a1e5aa3f --- /dev/null +++ b/host/lib/utils.cpp @@ -0,0 +1,44 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/props.hpp> + +using namespace uhd; + +/*********************************************************************** + * Props + **********************************************************************/ +named_prop_t::named_prop_t( + const wax::obj &key_, + const std::string &name_ +){ + key = key_; + name = name_; +} + +typedef boost::tuple<wax::obj, std::string> named_prop_tuple; + +named_prop_tuple uhd::extract_named_prop( + const wax::obj &key, + const std::string &name +){ + if (key.type() == typeid(named_prop_t)){ + named_prop_t np = key.as<named_prop_t>(); + return named_prop_tuple(np.key, np.name); + } + return named_prop_tuple(key, name); +} |