diff options
Diffstat (limited to 'host/lib')
137 files changed, 10284 insertions, 2053 deletions
diff --git a/host/lib/CMakeLists.txt b/host/lib/CMakeLists.txt index f74af1f29..a7a1cea3b 100644 --- a/host/lib/CMakeLists.txt +++ b/host/lib/CMakeLists.txt @@ -65,6 +65,26 @@ MACRO(INCLUDE_SUBDIRECTORY subdir) ENDMACRO(INCLUDE_SUBDIRECTORY) ######################################################################## +# Register lower level components +######################################################################## +MESSAGE(STATUS "") +# Dependencies +FIND_PACKAGE(USB1) +FIND_PACKAGE(GPSD) +LIBUHD_REGISTER_COMPONENT("USB" ENABLE_USB ON "ENABLE_LIBUHD;LIBUSB_FOUND" OFF OFF) +LIBUHD_REGISTER_COMPONENT("GPSD" ENABLE_GPSD OFF "ENABLE_LIBUHD;ENABLE_GPSD;LIBGPS_FOUND" OFF OFF) +# Devices +LIBUHD_REGISTER_COMPONENT("B100" ENABLE_B100 ON "ENABLE_LIBUHD;ENABLE_USB" OFF OFF) +LIBUHD_REGISTER_COMPONENT("B200" ENABLE_B200 ON "ENABLE_LIBUHD;ENABLE_USB" OFF OFF) +LIBUHD_REGISTER_COMPONENT("E100" ENABLE_E100 OFF "ENABLE_LIBUHD;LINUX" OFF OFF) +LIBUHD_REGISTER_COMPONENT("E300" ENABLE_E300 OFF "ENABLE_LIBUHD" OFF OFF) +LIBUHD_REGISTER_COMPONENT("USRP1" ENABLE_USRP1 ON "ENABLE_LIBUHD;ENABLE_USB" OFF OFF) +LIBUHD_REGISTER_COMPONENT("USRP2" ENABLE_USRP2 ON "ENABLE_LIBUHD" OFF OFF) +LIBUHD_REGISTER_COMPONENT("X300" ENABLE_X300 ON "ENABLE_LIBUHD" OFF OFF) +LIBUHD_REGISTER_COMPONENT("N230" ENABLE_N230 ON "ENABLE_LIBUHD" OFF OFF) +LIBUHD_REGISTER_COMPONENT("OctoClock" ENABLE_OCTOCLOCK ON "ENABLE_LIBUHD" OFF OFF) + +######################################################################## # Include subdirectories (different than add) ######################################################################## INCLUDE_SUBDIRECTORY(ic_reg_maps) @@ -74,6 +94,17 @@ INCLUDE_SUBDIRECTORY(transport) INCLUDE_SUBDIRECTORY(usrp) INCLUDE_SUBDIRECTORY(usrp_clock) INCLUDE_SUBDIRECTORY(utils) +INCLUDE_SUBDIRECTORY(experts) + +######################################################################## +# Build info +######################################################################## +INCLUDE(UHDBuildInfo) +UHD_LOAD_BUILD_INFO() +CONFIGURE_FILE( + ${CMAKE_CURRENT_SOURCE_DIR}/build_info.cpp + ${CMAKE_CURRENT_BINARY_DIR}/build_info.cpp +@ONLY) ######################################################################## # Setup UHD_VERSION_STRING for version.cpp @@ -87,6 +118,7 @@ CONFIGURE_FILE( # Append to the list of sources for lib uhd ######################################################################## LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_BINARY_DIR}/build_info.cpp ${CMAKE_CURRENT_SOURCE_DIR}/deprecated.cpp ${CMAKE_CURRENT_SOURCE_DIR}/device.cpp ${CMAKE_CURRENT_SOURCE_DIR}/image_loader.cpp diff --git a/host/lib/build_info.cpp b/host/lib/build_info.cpp new file mode 100644 index 000000000..5ccfd0268 --- /dev/null +++ b/host/lib/build_info.cpp @@ -0,0 +1,113 @@ +// +// Copyright 2015 National Instruments Corp. +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <config.h> + +#include <uhd/build_info.hpp> + +#include <boost/format.hpp> +#include <boost/version.hpp> +#include <boost/algorithm/string.hpp> + +#ifdef ENABLE_USB +#include <libusb.h> +#endif + +namespace uhd { namespace build_info { + + const std::string boost_version() { + return boost::algorithm::replace_all_copy( + std::string(BOOST_LIB_VERSION), "_", "." + ); + } + + const std::string build_date() { + return "@UHD_BUILD_DATE@"; + } + + const std::string c_compiler() { + return "@UHD_C_COMPILER@"; + } + + const std::string cxx_compiler() { + return "@UHD_CXX_COMPILER@"; + } + +#ifdef _MSC_VER + static const std::string define_flag = "/D "; +#else + static const std::string define_flag = "-D"; +#endif + + const std::string c_flags() { + return boost::algorithm::replace_all_copy( + (define_flag + std::string("@UHD_C_FLAGS@")), + std::string(";"), (" " + define_flag) + ); + } + + const std::string cxx_flags() { + return boost::algorithm::replace_all_copy( + (define_flag + std::string("@UHD_CXX_FLAGS@")), + std::string(";"), (" " + define_flag) + ); + } + + const std::string enabled_components() { + return boost::algorithm::replace_all_copy( + std::string("@_uhd_enabled_components@"), + std::string(";"), std::string(", ") + ); + } + + const std::string install_prefix() { + return "@CMAKE_INSTALL_PREFIX@"; + } + + const std::string libusb_version() { + #ifdef ENABLE_USB + /* + * Versions can only be queried from 1.0.13 onward. + * Depending on if the commit came from libusbx or + * libusb (now merged), the define might be different. + */ + #ifdef LIBUSB_API_VERSION /* 1.0.18 onward */ + int major_version = LIBUSB_API_VERSION >> 24; + int minor_version = (LIBUSB_API_VERSION & 0xFF0000) >> 16; + int micro_version = ((LIBUSB_API_VERSION & 0xFFFF) - 0x100) + 18; + + return str(boost::format("%d.%d.%d") + % major_version % minor_version % micro_version); + #elif defined(LIBUSBX_API_VERSION) /* 1.0.13 - 1.0.17 */ + switch(LIBUSBX_API_VERSION & 0xFF) { + case 0x00: + return "1.0.13"; + case 0x01: + return "1.0.15"; + case 0xFF: + return "1.0.14"; + default: + return "1.0.16 or 1.0.17"; + } + #else + return "< 1.0.13"; + #endif + #else + return "N/A"; + #endif + } +}} diff --git a/host/lib/convert/convert_item32.cpp b/host/lib/convert/convert_item32.cpp index 57bd64860..d52b47a1a 100644 --- a/host/lib/convert/convert_item32.cpp +++ b/host/lib/convert/convert_item32.cpp @@ -38,7 +38,10 @@ _DECLARE_ITEM32_CONVERTER(cpu_type, sc8) \ _DECLARE_ITEM32_CONVERTER(cpu_type, sc16) +/* Create sc16<->sc16,sc8(otw) */ DECLARE_ITEM32_CONVERTER(sc16) +/* Create fc32<->sc16,sc8(otw) */ DECLARE_ITEM32_CONVERTER(fc32) +/* Create fc64<->sc16,sc8(otw) */ DECLARE_ITEM32_CONVERTER(fc64) _DECLARE_ITEM32_CONVERTER(sc8, sc8) diff --git a/host/lib/convert/gen_convert_general.py b/host/lib/convert/gen_convert_general.py index 4f9eeb747..5c62d51df 100644 --- a/host/lib/convert/gen_convert_general.py +++ b/host/lib/convert/gen_convert_general.py @@ -39,30 +39,37 @@ DECLARE_CONVERTER(item32, 1, item32, 1, PRIORITY_GENERAL) { } """ -TMPL_CONV_GEN2_ITEM32 = """ -DECLARE_CONVERTER(item32, 1, sc16_item32_{end}, 1, PRIORITY_GENERAL) {{ +# Some 32-bit types converters are also defined in convert_item32.cpp to +# take care of quirks such as I/Q ordering on the wire etc. +TMPL_CONV_ITEM32 = """ +DECLARE_CONVERTER({in_type}, 1, {out_type}, 1, PRIORITY_GENERAL) {{ const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); for (size_t i = 0; i < nsamps; i++) {{ - output[i] = {to_wire}(input[i]); + output[i] = {to_wire_or_host}(input[i]); }} }} +""" -DECLARE_CONVERTER(sc16_item32_{end}, 1, item32, 1, PRIORITY_GENERAL) {{ +# 64-bit data types are two consecutive item32 items +TMPL_CONV_ITEM64 = """ +DECLARE_CONVERTER({in_type}, 1, {out_type}, 1, PRIORITY_GENERAL) {{ const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); - for (size_t i = 0; i < nsamps; i++) {{ - output[i] = {to_host}(input[i]); + // An item64 is two item32_t's + for (size_t i = 0; i < nsamps * 2; i++) {{ + output[i] = {to_wire_or_host}(input[i]); }} }} """ -TMPL_CONV_U8 = """ -DECLARE_CONVERTER(u8, 1, u8_item32_{end}, 1, PRIORITY_GENERAL) {{ - const boost::uint32_t *input = reinterpret_cast<const boost::uint32_t *>(inputs[0]); - boost::uint32_t *output = reinterpret_cast<boost::uint32_t *>(outputs[0]); + +TMPL_CONV_U8S8 = """ +DECLARE_CONVERTER({us8}, 1, {us8}_item32_{end}, 1, PRIORITY_GENERAL) {{ + const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); + item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); // 1) Copy all the 4-byte tuples size_t n_words = nsamps / 4; @@ -72,8 +79,8 @@ DECLARE_CONVERTER(u8, 1, u8_item32_{end}, 1, PRIORITY_GENERAL) {{ // 2) If nsamps was not a multiple of 4, copy the rest by hand size_t bytes_left = nsamps % 4; if (bytes_left) {{ - const u8_t *last_input_word = reinterpret_cast<const u8_t *>(&input[n_words]); - u8_t *last_output_word = reinterpret_cast<u8_t *>(&output[n_words]); + const {us8}_t *last_input_word = reinterpret_cast<const {us8}_t *>(&input[n_words]); + {us8}_t *last_output_word = reinterpret_cast<{us8}_t *>(&output[n_words]); for (size_t k = 0; k < bytes_left; k++) {{ last_output_word[k] = last_input_word[k]; }} @@ -81,9 +88,9 @@ DECLARE_CONVERTER(u8, 1, u8_item32_{end}, 1, PRIORITY_GENERAL) {{ }} }} -DECLARE_CONVERTER(u8_item32_{end}, 1, u8, 1, PRIORITY_GENERAL) {{ - const boost::uint32_t *input = reinterpret_cast<const boost::uint32_t *>(inputs[0]); - boost::uint32_t *output = reinterpret_cast<boost::uint32_t *>(outputs[0]); +DECLARE_CONVERTER({us8}_item32_{end}, 1, {us8}, 1, PRIORITY_GENERAL) {{ + const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); + item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); // 1) Copy all the 4-byte tuples size_t n_words = nsamps / 4; @@ -93,9 +100,9 @@ DECLARE_CONVERTER(u8_item32_{end}, 1, u8, 1, PRIORITY_GENERAL) {{ // 2) If nsamps was not a multiple of 4, copy the rest by hand size_t bytes_left = nsamps % 4; if (bytes_left) {{ - boost::uint32_t last_input_word = {to_host}(input[n_words]); - const u8_t *last_input_word_ptr = reinterpret_cast<const u8_t *>(&last_input_word); - u8_t *last_output_word = reinterpret_cast<u8_t *>(&output[n_words]); + item32_t last_input_word = {to_host}(input[n_words]); + const {us8}_t *last_input_word_ptr = reinterpret_cast<const {us8}_t *>(&last_input_word); + {us8}_t *last_output_word = reinterpret_cast<{us8}_t *>(&output[n_words]); for (size_t k = 0; k < bytes_left; k++) {{ last_output_word[k] = last_input_word_ptr[k]; }} @@ -103,6 +110,40 @@ DECLARE_CONVERTER(u8_item32_{end}, 1, u8, 1, PRIORITY_GENERAL) {{ }} """ +TMPL_CONV_S16 = """ +DECLARE_CONVERTER(s16, 1, s16_item32_{end}, 1, PRIORITY_GENERAL) {{ + const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); + item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); + + // 1) Copy all the 4-byte tuples + size_t n_words = nsamps / 2; + for (size_t i = 0; i < n_words; i++) {{ + output[i] = {to_wire}(input[i]); + }} + // 2) If nsamps was not a multiple of 2, copy the last one by hand + if (nsamps % 2) {{ + item32_t tmp = item32_t(*reinterpret_cast<const s16_t *>(&input[n_words])); + output[n_words] = {to_wire}(tmp); + }} +}} + +DECLARE_CONVERTER(s16_item32_{end}, 1, s16, 1, PRIORITY_GENERAL) {{ + const item32_t *input = reinterpret_cast<const item32_t *>(inputs[0]); + item32_t *output = reinterpret_cast<item32_t *>(outputs[0]); + + // 1) Copy all the 4-byte tuples + size_t n_words = nsamps / 2; + for (size_t i = 0; i < n_words; i++) {{ + output[i] = {to_host}(input[i]); + }} + // 2) If nsamps was not a multiple of 2, copy the last one by hand + if (nsamps % 2) {{ + item32_t tmp = {to_host}(input[n_words]); + *reinterpret_cast<s16_t *>(&output[n_words]) = s16_t(tmp); + }} +}} +""" + TMPL_CONV_USRP1_COMPLEX = """ DECLARE_CONVERTER(${cpu_type}, ${width}, sc16_item16_usrp1, 1, PRIORITY_GENERAL){ % for w in range(width): @@ -164,23 +205,52 @@ if __name__ == '__main__': file = os.path.basename(__file__) output = parse_tmpl(TMPL_HEADER, file=file) - #generate complex converters for all gen2 platforms - for end, to_host, to_wire in ( - ('be', 'uhd::ntohx', 'uhd::htonx'), - ('le', 'uhd::wtohx', 'uhd::htowx'), - ): - output += TMPL_CONV_GEN2_ITEM32.format( - end=end, to_host=to_host, to_wire=to_wire - ) - #generate raw (u8) converters: + ## Generate all data types that are exactly + ## item32 or multiples thereof: + for end in ('be', 'le'): + host_to_wire = {'be': 'uhd::htonx', 'le': 'uhd::htowx'}[end] + wire_to_host = {'be': 'uhd::ntohx', 'le': 'uhd::wtohx'}[end] + # item32 types (sc16->sc16 is a special case because it defaults + # to Q/I order on the wire: + for in_type, out_type, to_wire_or_host in ( + ('item32', 'sc16_item32_{end}', host_to_wire), + ('sc16_item32_{end}', 'item32', wire_to_host), + ('f32', 'f32_item32_{end}', host_to_wire), + ('f32_item32_{end}', 'f32', wire_to_host), + ): + output += TMPL_CONV_ITEM32.format( + end=end, to_wire_or_host=to_wire_or_host, + in_type=in_type.format(end=end), out_type=out_type.format(end=end) + ) + # 2xitem32 types: + for in_type, out_type in ( + ('fc32', 'fc32_item32_{end}'), + ('fc32_item32_{end}', 'fc32'), + ): + output += TMPL_CONV_ITEM64.format( + end=end, to_wire_or_host=to_wire_or_host, + in_type=in_type.format(end=end), out_type=out_type.format(end=end) + ) + + ## Real 16-Bit: for end, to_host, to_wire in ( ('be', 'uhd::ntohx', 'uhd::htonx'), ('le', 'uhd::wtohx', 'uhd::htowx'), ): - output += TMPL_CONV_U8.format( - end=end, to_host=to_host, to_wire=to_wire + output += TMPL_CONV_S16.format( + end=end, to_host=to_host, to_wire=to_wire ) + ## Real 8-Bit Types: + for us8 in ('u8', 's8'): + for end, to_host, to_wire in ( + ('be', 'uhd::ntohx', 'uhd::htonx'), + ('le', 'uhd::wtohx', 'uhd::htowx'), + ): + output += TMPL_CONV_U8S8.format( + us8=us8, end=end, to_host=to_host, to_wire=to_wire + ) + #generate complex converters for usrp1 format (requires Cheetah) for width in 1, 2, 4: for cpu_type, do_scale in ( diff --git a/host/lib/experts/CMakeLists.txt b/host/lib/experts/CMakeLists.txt new file mode 100644 index 000000000..db533e7fa --- /dev/null +++ b/host/lib/experts/CMakeLists.txt @@ -0,0 +1,34 @@ +# +# Copyright 2016 Ettus Research +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# This file included, use CMake directory variables +######################################################################## +INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}) + +LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/expert_container.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/expert_factory.cpp +) + +# Verbose Debug output for send/recv +SET( UHD_EXPERT_LOGGING OFF CACHE BOOL "Enable verbose logging for experts" ) +OPTION( UHD_EXPERT_LOGGING "Enable verbose logging for experts" "" ) +IF(UHD_EXPERT_LOGGING) + MESSAGE(STATUS "Enabling verbose logging for experts") + ADD_DEFINITIONS(-DUHD_EXPERT_LOGGING) +ENDIF() diff --git a/host/lib/experts/expert_container.cpp b/host/lib/experts/expert_container.cpp new file mode 100644 index 000000000..edfc2ebe3 --- /dev/null +++ b/host/lib/experts/expert_container.cpp @@ -0,0 +1,531 @@ +// +// Copyright 2016 Ettus Research +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "expert_container.hpp" +#include <uhd/exception.hpp> +#include <uhd/utils/msg.hpp> +#include <boost/format.hpp> +#include <boost/foreach.hpp> +#include <boost/function.hpp> +#include <boost/bind.hpp> +#include <boost/make_shared.hpp> +#include <boost/scoped_ptr.hpp> +#include <boost/thread/mutex.hpp> +#include <boost/thread.hpp> +#include <boost/graph/graph_traits.hpp> +#include <boost/graph/depth_first_search.hpp> +#include <boost/graph/topological_sort.hpp> +#include <boost/graph/adjacency_list.hpp> + +#ifdef UHD_EXPERT_LOGGING +#define EX_LOG(depth, str) _log(depth, str) +#else +#define EX_LOG(depth, str) +#endif + +namespace uhd { namespace experts { + +typedef boost::adjacency_list< + boost::vecS, //Container used to represent the edge-list for each of the vertices. + boost::vecS, //container used to represent the vertex-list of the graph. + boost::directedS, //Directionality of graph + dag_vertex_t*, //Storage for each vertex + boost::no_property, //Storage for each edge + boost::no_property, //Storage for graph object + boost::listS //Container used to represent the edge-list for the graph. +> expert_graph_t; + +typedef std::map<std::string, expert_graph_t::vertex_descriptor> vertex_map_t; +typedef std::list<expert_graph_t::vertex_descriptor> node_queue_t; + +typedef boost::graph_traits<expert_graph_t>::edge_iterator edge_iter; +typedef boost::graph_traits<expert_graph_t>::vertex_iterator vertex_iter; + +class expert_container_impl : public expert_container +{ +private: //Visitor class for cycle detection algorithm + struct cycle_det_visitor : public boost::dfs_visitor<> + { + cycle_det_visitor(std::vector<std::string>& back_edges): + _back_edges(back_edges) {} + + template <class Edge, class Graph> + void back_edge(Edge u, const Graph& g) { + _back_edges.push_back( + g[boost::source(u,g)]->get_name() + "->" + g[boost::target(u,g)]->get_name()); + } + private: std::vector<std::string>& _back_edges; + }; + +public: + expert_container_impl(const std::string& name): + _name(name) + { + } + + ~expert_container_impl() + { + clear(); + } + + const std::string& get_name() const + { + return _name; + } + + void resolve_all(bool force = false) + { + boost::lock_guard<boost::recursive_mutex> resolve_lock(_resolve_mutex); + boost::lock_guard<boost::mutex> lock(_mutex); + EX_LOG(0, str(boost::format("resolve_all(%s)") % (force?"force":""))); + _resolve_helper("", "", force); + } + + void resolve_from(const std::string& node_name) + { + boost::lock_guard<boost::recursive_mutex> resolve_lock(_resolve_mutex); + boost::lock_guard<boost::mutex> lock(_mutex); + EX_LOG(0, str(boost::format("resolve_from(%s)") % node_name)); + _resolve_helper(node_name, "", false); + } + + void resolve_to(const std::string& node_name) + { + boost::lock_guard<boost::recursive_mutex> resolve_lock(_resolve_mutex); + boost::lock_guard<boost::mutex> lock(_mutex); + EX_LOG(0, str(boost::format("resolve_to(%s)") % node_name)); + _resolve_helper("", node_name, false); + } + + dag_vertex_t& retrieve(const std::string& name) const + { + try { + expert_graph_t::vertex_descriptor vertex = _lookup_vertex(name); + return _get_vertex(vertex); + } catch(std::exception&) { + throw uhd::lookup_error("failed to find node " + name + " in expert graph"); + } + } + + const dag_vertex_t& lookup(const std::string& name) const + { + return retrieve(name); + } + + const node_retriever_t& node_retriever() const + { + return *this; + } + + std::string to_dot() const + { + static const std::string DATA_SHAPE("ellipse"); + static const std::string WORKER_SHAPE("box"); + + std::string dot_str; + dot_str += "digraph uhd_experts_" + _name + " {\n rankdir=LR;\n"; + // Iterate through the vertices and print them out + for (std::pair<vertex_iter, vertex_iter> vi = boost::vertices(_expert_dag); + vi.first != vi.second; + ++vi.first + ) { + const dag_vertex_t& vertex = _get_vertex(*vi.first); + if (vertex.get_class() != CLASS_WORKER) { + dot_str += str(boost::format(" %d [label=\"%s\",shape=%s,xlabel=\"%s\"];\n") % + boost::uint32_t(*vi.first) % vertex.get_name() % + DATA_SHAPE % vertex.get_dtype()); + } else { + dot_str += str(boost::format(" %d [label=\"%s\",shape=%s];\n") % + boost::uint32_t(*vi.first) % vertex.get_name() % WORKER_SHAPE); + } + } + + // Iterate through the edges and print them out + for (std::pair<edge_iter, edge_iter> ei = boost::edges(_expert_dag); + ei.first != ei.second; + ++ei.first + ) { + dot_str += str(boost::format(" %d -> %d;\n") % + boost::uint32_t(boost::source(*(ei.first), _expert_dag)) % + boost::uint32_t(boost::target(*(ei.first), _expert_dag))); + } + dot_str += "}\n"; + return dot_str; + } + + void debug_audit() const + { +#ifdef UHD_EXPERT_LOGGING + EX_LOG(0, "debug_audit()"); + + //Test 1: Check for cycles in graph + std::vector<std::string> back_edges; + cycle_det_visitor cdet_vis(back_edges); + boost::depth_first_search(_expert_dag, boost::visitor(cdet_vis)); + if (back_edges.empty()) { + EX_LOG(1, "cycle check ... PASSED"); + } else { + EX_LOG(1, "cycle check ... ERROR!!!"); + BOOST_FOREACH(const std::string& e, back_edges) { + EX_LOG(2, "back edge: " + e); + } + } + back_edges.clear(); + + //Test 2: Check data node input and output edges + std::vector<std::string> data_node_issues; + BOOST_FOREACH(const vertex_map_t::value_type& v, _datanode_map) { + size_t in_count = 0, out_count = 0; + for (std::pair<edge_iter, edge_iter> ei = boost::edges(_expert_dag); + ei.first != ei.second; + ++ei.first + ) { + if (boost::target(*(ei.first), _expert_dag) == v.second) + in_count++; + if (boost::source(*(ei.first), _expert_dag) == v.second) + out_count++; + } + bool prop_unused = false; + if (in_count > 1) { + data_node_issues.push_back(v.first + ": multiple writers (workers)"); + } else if (in_count > 0) { + if (_expert_dag[v.second]->get_class() == CLASS_PROPERTY) { + data_node_issues.push_back(v.first + ": multiple writers (worker and property tree)"); + } + } else { + if (_expert_dag[v.second]->get_class() != CLASS_PROPERTY) { + data_node_issues.push_back(v.first + ": unreachable (will always hold initial value)"); + } else if (_expert_dag[v.second]->get_class() == CLASS_PROPERTY and not _expert_dag[v.second]->has_write_callback()) { + if (out_count > 0) { + data_node_issues.push_back(v.first + ": needs explicit resolve after write"); + } else { + data_node_issues.push_back(v.first + ": unused (no readers or writers)"); + prop_unused = true; + } + } + } + if (out_count < 1) { + if (_expert_dag[v.second]->get_class() != CLASS_PROPERTY) { + data_node_issues.push_back(v.first + ": unused (is not read by any worker)"); + } else if (_expert_dag[v.second]->get_class() == CLASS_PROPERTY and not _expert_dag[v.second]->has_read_callback()) { + if (not prop_unused) { + data_node_issues.push_back(v.first + ": needs explicit resolve to read"); + } + } + } + } + + if (data_node_issues.empty()) { + EX_LOG(1, "data node check ... PASSED"); + } else { + EX_LOG(1, "data node check ... WARNING!"); + BOOST_FOREACH(const std::string& i, data_node_issues) { + EX_LOG(2, i); + } + } + data_node_issues.clear(); + + //Test 3: Check worker node input and output edges + std::vector<std::string> worker_issues; + BOOST_FOREACH(const vertex_map_t::value_type& v, _worker_map) { + size_t in_count = 0, out_count = 0; + for (std::pair<edge_iter, edge_iter> ei = boost::edges(_expert_dag); + ei.first != ei.second; + ++ei.first + ) { + if (boost::target(*(ei.first), _expert_dag) == v.second) + in_count++; + if (boost::source(*(ei.first), _expert_dag) == v.second) + out_count++; + } + if (in_count < 1) { + worker_issues.push_back(v.first + ": no inputs (will never resolve)"); + } + if (out_count < 1) { + worker_issues.push_back(v.first + ": no outputs"); + } + } + if (worker_issues.empty()) { + EX_LOG(1, "worker check ... PASSED"); + } else { + EX_LOG(1, "worker check ... WARNING!"); + BOOST_FOREACH(const std::string& i, worker_issues) { + EX_LOG(2, i); + } + } + worker_issues.clear(); +#endif + } + + inline boost::recursive_mutex& resolve_mutex() { + return _resolve_mutex; + } + +protected: + void add_data_node(dag_vertex_t* data_node, auto_resolve_mode_t resolve_mode) + { + boost::lock_guard<boost::mutex> lock(_mutex); + + //Sanity check node pointer + if (data_node == NULL) { + throw uhd::runtime_error("NULL data node passed into expert container for registration."); + } + + //Sanity check the data node and ensure that it is not already in this graph + EX_LOG(0, str(boost::format("add_data_node(%s)") % data_node->get_name())); + if (data_node->get_class() == CLASS_WORKER) { + throw uhd::runtime_error("Supplied node " + data_node->get_name() + " is not a data/property node."); + delete data_node; + } + if (_datanode_map.find(data_node->get_name()) != _datanode_map.end()) { + throw uhd::runtime_error("Data node with name " + data_node->get_name() + " already exists"); + delete data_node; + } + + try { + //Add a vertex in this graph for the data node + expert_graph_t::vertex_descriptor gr_node = boost::add_vertex(data_node, _expert_dag); + EX_LOG(1, str(boost::format("added vertex %s") % data_node->get_name())); + _datanode_map.insert(vertex_map_t::value_type(data_node->get_name(), gr_node)); + + //Add resolve callbacks + if (resolve_mode == AUTO_RESOLVE_ON_WRITE or resolve_mode == AUTO_RESOLVE_ON_READ_WRITE) { + EX_LOG(2, str(boost::format("added write callback"))); + data_node->set_write_callback(boost::bind(&expert_container_impl::resolve_from, this, _1)); + } + if (resolve_mode == AUTO_RESOLVE_ON_READ or resolve_mode == AUTO_RESOLVE_ON_READ_WRITE) { + EX_LOG(2, str(boost::format("added read callback"))); + data_node->set_read_callback(boost::bind(&expert_container_impl::resolve_to, this, _1)); + } + } catch (...) { + clear(); + throw uhd::assertion_error("Unknown unrecoverable error adding data node. Cleared expert container."); + } + } + + void add_worker(worker_node_t* worker) + { + boost::lock_guard<boost::mutex> lock(_mutex); + + //Sanity check node pointer + if (worker == NULL) { + throw uhd::runtime_error("NULL worker passed into expert container for registration."); + } + + //Sanity check the data node and ensure that it is not already in this graph + EX_LOG(0, str(boost::format("add_worker(%s)") % worker->get_name())); + if (worker->get_class() != CLASS_WORKER) { + throw uhd::runtime_error("Supplied node " + worker->get_name() + " is not a worker node."); + delete worker; + } + if (_worker_map.find(worker->get_name()) != _worker_map.end()) { + throw uhd::runtime_error("Resolver with name " + worker->get_name() + " already exists."); + delete worker; + } + + try { + //Add a vertex in this graph for the worker node + expert_graph_t::vertex_descriptor gr_node = boost::add_vertex(worker, _expert_dag); + EX_LOG(1, str(boost::format("added vertex %s") % worker->get_name())); + _worker_map.insert(vertex_map_t::value_type(worker->get_name(), gr_node)); + + //For each input, add an edge from the input to this node + BOOST_FOREACH(const std::string& node_name, worker->get_inputs()) { + vertex_map_t::const_iterator node = _datanode_map.find(node_name); + if (node != _datanode_map.end()) { + boost::add_edge((*node).second, gr_node, _expert_dag); + EX_LOG(1, str(boost::format("added edge %s->%s") % _expert_dag[(*node).second]->get_name() % _expert_dag[gr_node]->get_name())); + } else { + throw uhd::runtime_error("Data node with name " + node_name + " was not found"); + } + } + + //For each output, add an edge from this node to the output + BOOST_FOREACH(const std::string& node_name, worker->get_outputs()) { + vertex_map_t::const_iterator node = _datanode_map.find(node_name); + if (node != _datanode_map.end()) { + boost::add_edge(gr_node, (*node).second, _expert_dag); + EX_LOG(1, str(boost::format("added edge %s->%s") % _expert_dag[gr_node]->get_name() % _expert_dag[(*node).second]->get_name())); + } else { + throw uhd::runtime_error("Data node with name " + node_name + " was not found"); + } + } + } catch (uhd::runtime_error& ex) { + clear(); + //Promote runtime_error to assertion_error + throw uhd::assertion_error(std::string(ex.what()) + " (Cleared expert container because error is unrecoverable)."); + } catch (...) { + clear(); + throw uhd::assertion_error("Unknown unrecoverable error adding worker. Cleared expert container."); + } + } + + void clear() + { + boost::lock_guard<boost::mutex> lock(_mutex); + EX_LOG(0, "clear()"); + + // Iterate through the vertices and release their node storage + typedef boost::graph_traits<expert_graph_t>::vertex_iterator vertex_iter; + for (std::pair<vertex_iter, vertex_iter> vi = boost::vertices(_expert_dag); + vi.first != vi.second; + ++vi.first + ) { + try { + delete _expert_dag[*vi.first]; + _expert_dag[*vi.first] = NULL; + } catch (...) { + //If a dag_vertex is a worker, it has a virtual dtor which + //can possibly throw an exception. We will not let that + //terminate clear() and leave things in a bad state. + } + } + + //The following calls will not throw because they all contain + //intrinsic types. + + // Release all vertices and edges in the DAG + _expert_dag.clear(); + + // Release all nodes in the map + _worker_map.clear(); + _datanode_map.clear(); + } + +private: + void _resolve_helper(std::string start, std::string stop, bool force) + { + //Sort the graph topologically. This ensures that for all dependencies, the dependant + //is always after all of its dependencies. + node_queue_t sorted_nodes; + try { + boost::topological_sort(_expert_dag, std::front_inserter(sorted_nodes)); + } catch (boost::not_a_dag&) { + std::vector<std::string> back_edges; + cycle_det_visitor cdet_vis(back_edges); + boost::depth_first_search(_expert_dag, boost::visitor(cdet_vis)); + if (not back_edges.empty()) { + std::string edges; + BOOST_FOREACH(const std::string& e, back_edges) { + edges += "* " + e + ""; + } + throw uhd::runtime_error("Cannot resolve expert because it has at least one cycle!\n" + "The following back-edges were found:" + edges); + } + } + if (sorted_nodes.empty()) return; + + //Determine the start and stop node. If one is not explicitly specified then + //resolve everything + expert_graph_t::vertex_descriptor start_vertex = sorted_nodes.front(); + expert_graph_t::vertex_descriptor stop_vertex = sorted_nodes.back(); + if (not start.empty()) start_vertex = _lookup_vertex(start); + if (not stop.empty()) stop_vertex = _lookup_vertex(stop); + + //First Pass: Resolve all nodes if they are dirty, in a topological order + std::list<dag_vertex_t*> resolved_workers; + bool start_node_encountered = false; + for (node_queue_t::iterator node_iter = sorted_nodes.begin(); + node_iter != sorted_nodes.end(); + ++node_iter + ) { + //Determine if we are at or beyond the starting node + if (*node_iter == start_vertex) start_node_encountered = true; + + //Only resolve if the starting node has passed + if (start_node_encountered) { + dag_vertex_t& node = _get_vertex(*node_iter); + std::string node_val; + if (force or node.is_dirty()) { + node.resolve(); + if (node.get_class() == CLASS_WORKER) { + resolved_workers.push_back(&node); + } + EX_LOG(1, str(boost::format("resolved node %s (%s) [%s]") % + node.get_name() % (node.is_dirty()?"dirty":"clean") % node.to_string())); + } else { + EX_LOG(1, str(boost::format("skipped node %s (%s) [%s]") % + node.get_name() % (node.is_dirty()?"dirty":"clean") % node.to_string())); + } + } + + //Determine if we are beyond the stop node + if (*node_iter == stop_vertex) break; + } + + //Second Pass: Mark all the workers clean. The policy is that a worker will mark all of + //its dependencies clean so after this step all data nodes that are not consumed by a worker + //will remain dirty (as they should because no one has consumed their value) + for (std::list<dag_vertex_t*>::iterator worker = resolved_workers.begin(); + worker != resolved_workers.end(); + ++worker + ) { + (*worker)->mark_clean(); + } + } + + expert_graph_t::vertex_descriptor _lookup_vertex(const std::string& name) const + { + expert_graph_t::vertex_descriptor vertex; + //Look for node in the data-node map + vertex_map_t::const_iterator vertex_iter = _datanode_map.find(name); + if (vertex_iter != _datanode_map.end()) { + vertex = (*vertex_iter).second; + } else { + //If not found, look in the worker-node map + vertex_iter = _worker_map.find(name); + if (vertex_iter != _worker_map.end()) { + vertex = (*vertex_iter).second; + } else { + throw uhd::lookup_error("Could not find node with name " + name); + } + } + return vertex; + } + + dag_vertex_t& _get_vertex(expert_graph_t::vertex_descriptor desc) const { + //Requirement: Node must exist in expert graph + dag_vertex_t* vertex_ptr = _expert_dag[desc]; + if (vertex_ptr) { + return *vertex_ptr; + } else { + throw uhd::assertion_error("Expert graph malformed. Found a NULL node."); + } + } + + void _log(size_t depth, const std::string& str) const + { + std::string indents; + for (size_t i = 0; i < depth; i++) indents += "- "; + UHD_MSG(fastpath) << "[expert::" + _name + "] " << indents << str << std::endl; + } + +private: + const std::string _name; + expert_graph_t _expert_dag; //The primary graph data structure as an adjacency list + vertex_map_t _worker_map; //A map from vertex name to vertex descriptor for workers + vertex_map_t _datanode_map; //A map from vertex name to vertex descriptor for data nodes + boost::mutex _mutex; + boost::recursive_mutex _resolve_mutex; +}; + +expert_container::sptr expert_container::make(const std::string& name) +{ + return boost::make_shared<expert_container_impl>(name); +} + +}} diff --git a/host/lib/experts/expert_container.hpp b/host/lib/experts/expert_container.hpp new file mode 100644 index 000000000..7e626dcc5 --- /dev/null +++ b/host/lib/experts/expert_container.hpp @@ -0,0 +1,202 @@ +// +// Copyright 2016 Ettus Research +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_EXPERTS_EXPERT_CONTAINER_HPP +#define INCLUDED_UHD_EXPERTS_EXPERT_CONTAINER_HPP + +#include "expert_nodes.hpp" +#include <uhd/config.hpp> +#include <boost/noncopyable.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/thread/recursive_mutex.hpp> + +namespace uhd { namespace experts { + + enum auto_resolve_mode_t { + AUTO_RESOLVE_OFF, + AUTO_RESOLVE_ON_READ, + AUTO_RESOLVE_ON_WRITE, + AUTO_RESOLVE_ON_READ_WRITE + }; + + class UHD_API expert_container : private boost::noncopyable, public node_retriever_t { + public: //Methods + typedef boost::shared_ptr<expert_container> sptr; + + virtual ~expert_container() {}; + + /*! + * Return the name of this container + */ + virtual const std::string& get_name() const = 0; + + /*! + * Resolves all the nodes in this expert graph. + * + * Dependency analysis is performed on the graph and nodes + * are resolved in a topologically sorted order to ensure + * that no nodes receive stale data. + * Nodes and their dependencies are resolved only if they are + * dirty i.e. their contained values have changed since the + * last resolve. + * This call requires an acyclic expert graph. + * + * \param force If true then ignore dirty state and resolve all nodes + * \throws uhd::runtime_error if graph cannot be resolved + */ + virtual void resolve_all(bool force = false) = 0; + + /*! + * Resolves all the nodes that depend on the specified node. + * + * Dependency analysis is performed on the graph and nodes + * are resolved in a topologically sorted order to ensure + * that no nodes receive stale data. + * Nodes and their dependencies are resolved only if they are + * dirty i.e. their contained values have changed since the + * last resolve. + * This call requires an acyclic expert graph. + * + * \param node_name Name of the node to start resolving from + * \throws uhd::lookup_error if node_name not in container + * \throws uhd::runtime_error if graph cannot be resolved + * + */ + virtual void resolve_from(const std::string& node_name) = 0; + + /*! + * Resolves all the specified node and all of its dependencies. + * + * Dependency analysis is performed on the graph and nodes + * are resolved in a topologically sorted order to ensure + * that no nodes receive stale data. + * Nodes and their dependencies are resolved only if they are + * dirty i.e. their contained values have changed since the + * last resolve. + * This call requires an acyclic expert graph. + * + * \param node_name Name of the node to resolve + * \throws uhd::lookup_error if node_name not in container + * \throws uhd::runtime_error if graph cannot be resolved + * + */ + virtual void resolve_to(const std::string& node_name) = 0; + + /*! + * Return a node retriever object for this container + */ + virtual const node_retriever_t& node_retriever() const = 0; + + /*! + * Returns a DOT (graph description language) representation + * of the expert graph. The output has labels for the node + * name, node type (data or worker) and the underlying + * data type for each node. + * + */ + virtual std::string to_dot() const = 0; + + /*! + * Runs several sanity checks on the underlying graph to + * flag dependency issues. Outputs of the checks are + * logged to the console so UHD_EXPERTS_VERBOSE_LOGGING + * must be enabled to see the results + * + */ + virtual void debug_audit() const = 0; + + private: + /*! + * Lookup a node with the specified name in the contained graph + * + * If the node is found, a reference to the node is returned. + * If the node is not found, uhd::lookup_error is thrown + * lookup can return a data or a worker node + * \implements uhd::experts::node_retriever_t + * + * \param name Name of the node to find + * + */ + virtual const dag_vertex_t& lookup(const std::string& name) const = 0; + virtual dag_vertex_t& retrieve(const std::string& name) const = 0; + + /*! + * expert_factory is a friend of expert_container and + * handles all operations that change the structure of + * the underlying dependency graph. + * The expert_container instance owns all data and worker + * nodes and is responsible for release storage on destruction. + * However, the expert_factory allocates storage for the + * node and passes them into the expert_container using the + * following "protected" API calls. + * + */ + friend class expert_factory; + + /*! + * Creates an empty instance of expert_container with the + * specified name. + * + * \param name Name of the container + */ + static sptr make(const std::string& name); + + /*! + * Returns a reference to the resolver mutex. + * + * The resolver mutex guarantees that external operations + * to data-nodes are serialized with resolves of this + * container. + * + */ + virtual boost::recursive_mutex& resolve_mutex() = 0; + + /*! + * Add a data node to the expert graph + * + * \param data_node Pointer to a fully constructed data node object + * \resolve_mode Auto resolve options: Choose from "disabled" and resolve on "read", "write" or "both" + * \throws uhd::runtime_error if node already exists or is of a wrong type (recoverable) + * \throws uhd::assertion_error for other failures (unrecoverable. will clear the graph) + * + */ + virtual void add_data_node(dag_vertex_t* data_node, auto_resolve_mode_t resolve_mode = AUTO_RESOLVE_OFF) = 0; + + /*! + * Add a worker node to the expert graph + * + * \param worker Pointer to a fully constructed worker object + * \throws uhd::runtime_error if worker already exists or is of a wrong type (recoverable) + * \throws uhd::assertion_error for other failures (unrecoverable. will clear the graph) + * + */ + virtual void add_worker(worker_node_t* worker) = 0; + + /*! + * Release all storage for this object. This will delete all contained + * data and worker nodes and remove all dependency relationship and + * resolve callbacks. + * + * The object will be restored to its newly constructed state. Will not + * throw. + */ + virtual void clear() = 0; + }; + +}} + +#endif /* INCLUDED_UHD_EXPERTS_EXPERT_CONTAINER_HPP */ diff --git a/host/lib/experts/expert_factory.cpp b/host/lib/experts/expert_factory.cpp new file mode 100644 index 000000000..f887ad4a3 --- /dev/null +++ b/host/lib/experts/expert_factory.cpp @@ -0,0 +1,27 @@ +// +// Copyright 2016 Ettus Research +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "expert_factory.hpp" + +namespace uhd { namespace experts { + +expert_container::sptr expert_factory::create_container(const std::string& name) +{ + return expert_container::make(name); +} + +}} diff --git a/host/lib/experts/expert_factory.hpp b/host/lib/experts/expert_factory.hpp new file mode 100644 index 000000000..83369117d --- /dev/null +++ b/host/lib/experts/expert_factory.hpp @@ -0,0 +1,337 @@ +// +// Copyright 2016 Ettus Research +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_EXPERTS_EXPERT_FACTORY_HPP +#define INCLUDED_UHD_EXPERTS_EXPERT_FACTORY_HPP + +#include "expert_container.hpp" +#include <uhd/property_tree.hpp> +#include <uhd/config.hpp> +#include <boost/noncopyable.hpp> +#include <boost/bind.hpp> +#include <memory> + +namespace uhd { namespace experts { + + /*! + * expert_factory is a friend of expert_container and + * handles all operations to create and change the structure of + * the an expert container. + * The expert_factory allocates storage for the nodes in the + * expert_container and passes allocated objects to the container + * using private APIs. The expert_container instance owns all + * data and workernodes and is responsible for releasing their + * storage on destruction. + * + */ + class UHD_API expert_factory : public boost::noncopyable { + public: + + /*! + * Creates an empty instance of expert_container with the + * specified name. + * + * \param name Name of the container + */ + static expert_container::sptr create_container( + const std::string& name + ); + + /*! + * Add a data node to the expert graph. + * + * \param container A shared pointer to the container to add the node to + * \param name The name of the data node + * \param init_val The initial value of the data node + * \param mode The auto resolve mode + * + * Requirements for data_t + * - Must have a default constructor + * - Must have a copy constructor + * - Must have an assignment operator (=) + * - Must have an equality operator (==) + */ + template<typename data_t> + inline static void add_data_node( + expert_container::sptr container, + const std::string& name, + const data_t& init_val, + const auto_resolve_mode_t mode = AUTO_RESOLVE_OFF + ) { + container->add_data_node(new data_node_t<data_t>(name, init_val), mode); + } + + /*! + * Add a expert property to a property tree AND an expert graph + * + * \param container A shared pointer to the expert container to add the node to + * \param subtree A shared pointer to subtree to add the property to + * \param path The path of the property in the subtree + * \param name The name of the data node in the expert graph + * \param init_val The initial value of the data node + * \param mode The auto resolve mode + * + * Requirements for data_t + * - Must have a default constructor + * - Must have a copy constructor + * - Must have an assignment operator (=) + * - Must have an equality operator (==) + */ + template<typename data_t> + inline static property<data_t>& add_prop_node( + expert_container::sptr container, + property_tree::sptr subtree, + const fs_path &path, + const std::string& name, + const data_t& init_val, + const auto_resolve_mode_t mode = AUTO_RESOLVE_OFF + ) { + property<data_t>& prop = subtree->create<data_t>(path, property_tree::MANUAL_COERCE); + data_node_t<data_t>* node_ptr = + new data_node_t<data_t>(name, init_val, &container->resolve_mutex()); + prop.set(init_val); + prop.add_desired_subscriber(boost::bind(&data_node_t<data_t>::commit, node_ptr, _1)); + prop.set_publisher(boost::bind(&data_node_t<data_t>::retrieve, node_ptr)); + container->add_data_node(node_ptr, mode); + return prop; + } + + /*! + * Add a expert property to a property tree AND an expert graph. + * The property is registered with the path as the identifier for + * both the property subtree and the expert container + * + * \param container A shared pointer to the expert container to add the node to + * \param subtree A shared pointer to subtree to add the property to + * \param path The path of the property in the subtree + * \param init_val The initial value of the data node + * \param mode The auto resolve mode + * + */ + template<typename data_t> + inline static property<data_t>& add_prop_node( + expert_container::sptr container, + property_tree::sptr subtree, + const fs_path &path, + const data_t& init_val, + const auto_resolve_mode_t mode = AUTO_RESOLVE_OFF + ) { + return add_prop_node(container, subtree, path, path, init_val, mode); + } + + /*! + * Add a dual expert property to a property tree AND an expert graph. + * A dual property is a desired and coerced value pair + * + * \param container A shared pointer to the expert container to add the node to + * \param subtree A shared pointer to subtree to add the property to + * \param path The path of the property in the subtree + * \param desired_name The name of the desired data node in the expert graph + * \param desired_name The name of the coerced data node in the expert graph + * \param init_val The initial value of both the data nodes + * \param mode The auto resolve mode + * + * Requirements for data_t + * - Must have a default constructor + * - Must have a copy constructor + * - Must have an assignment operator (=) + * - Must have an equality operator (==) + */ + template<typename data_t> + inline static property<data_t>& add_dual_prop_node( + expert_container::sptr container, + property_tree::sptr subtree, + const fs_path &path, + const std::string& desired_name, + const std::string& coerced_name, + const data_t& init_val, + const auto_resolve_mode_t mode = AUTO_RESOLVE_OFF + ) { + bool auto_resolve_desired = (mode==AUTO_RESOLVE_ON_WRITE or mode==AUTO_RESOLVE_ON_READ_WRITE); + bool auto_resolve_coerced = (mode==AUTO_RESOLVE_ON_READ or mode==AUTO_RESOLVE_ON_READ_WRITE); + + property<data_t>& prop = subtree->create<data_t>(path, property_tree::MANUAL_COERCE); + data_node_t<data_t>* desired_node_ptr = + new data_node_t<data_t>(desired_name, init_val, &container->resolve_mutex()); + data_node_t<data_t>* coerced_node_ptr = + new data_node_t<data_t>(coerced_name, init_val, &container->resolve_mutex()); + prop.set(init_val); + prop.set_coerced(init_val); + prop.add_desired_subscriber(boost::bind(&data_node_t<data_t>::commit, desired_node_ptr, _1)); + prop.set_publisher(boost::bind(&data_node_t<data_t>::retrieve, coerced_node_ptr)); + + container->add_data_node(desired_node_ptr, + auto_resolve_desired ? AUTO_RESOLVE_ON_WRITE : AUTO_RESOLVE_OFF); + container->add_data_node(coerced_node_ptr, + auto_resolve_coerced ? AUTO_RESOLVE_ON_READ : AUTO_RESOLVE_OFF); + return prop; + } + + /*! + * Add a dual expert property to a property tree AND an expert graph. + * A dual property is a desired and coerced value pair + * The property is registered with path/desired as the desired node + * name and path/coerced as the coerced node name + * + * \param container A shared pointer to the expert container to add the node to + * \param subtree A shared pointer to subtree to add the property to + * \param path The path of the property in the subtree + * \param init_val The initial value of both the data nodes + * \param mode The auto resolve mode + * + */ + template<typename data_t> + inline static property<data_t>& add_dual_prop_node( + expert_container::sptr container, + property_tree::sptr subtree, + const fs_path &path, + const data_t& init_val, + const auto_resolve_mode_t mode = AUTO_RESOLVE_OFF + ) { + return add_dual_prop_node(container, subtree, path, path + "/desired", path + "/coerced", init_val, mode); + } + + /*! + * Add a worker node to the expert graph. + * The expert_container owns and manages storage for the worker + * + * \tparam worker_t Data type of the worker class + * + * \param container A shared pointer to the container to add the node to + * + */ + template<typename worker_t> + inline static void add_worker_node( + expert_container::sptr container + ) { + container->add_worker(new worker_t()); + } + + /*! + * Add a worker node to the expert graph. + * The expert_container owns and manages storage for the worker + * + * \tparam worker_t Data type of the worker class + * \tparam arg1_t Data type of the first argument to the constructor + * \tparam ... + * \tparam argN_t Data type of the Nth argument to the constructor + * + * \param container A shared pointer to the container to add the node to + * \param arg1 First arg to ctor + * \param ... + * \param argN Nth arg to ctor + * + */ + template<typename worker_t, typename arg1_t> + inline static void add_worker_node( + expert_container::sptr container, + arg1_t const & arg1 + ) { + container->add_worker(new worker_t(arg1)); + } + + template<typename worker_t, typename arg1_t, typename arg2_t> + inline static void add_worker_node( + expert_container::sptr container, + arg1_t const & arg1, + arg2_t const & arg2 + ) { + container->add_worker(new worker_t(arg1, arg2)); + } + + template<typename worker_t, typename arg1_t, typename arg2_t, typename arg3_t> + inline static void add_worker_node( + expert_container::sptr container, + arg1_t const & arg1, + arg2_t const & arg2, + arg3_t const & arg3 + ) { + container->add_worker(new worker_t(arg1, arg2, arg3)); + } + + template<typename worker_t, typename arg1_t, typename arg2_t, typename arg3_t, typename arg4_t> + inline static void add_worker_node( + expert_container::sptr container, + arg1_t const & arg1, + arg2_t const & arg2, + arg3_t const & arg3, + arg4_t const & arg4 + ) { + container->add_worker(new worker_t(arg1, arg2, arg3, arg4)); + } + + template<typename worker_t, typename arg1_t, typename arg2_t, typename arg3_t, typename arg4_t, + typename arg5_t> + inline static void add_worker_node( + expert_container::sptr container, + arg1_t const & arg1, + arg2_t const & arg2, + arg3_t const & arg3, + arg4_t const & arg4, + arg5_t const & arg5 + ) { + container->add_worker(new worker_t(arg1, arg2, arg3, arg4, arg5)); + } + + template<typename worker_t, typename arg1_t, typename arg2_t, typename arg3_t, typename arg4_t, + typename arg5_t, typename arg6_t> + inline static void add_worker_node( + expert_container::sptr container, + arg1_t const & arg1, + arg2_t const & arg2, + arg3_t const & arg3, + arg4_t const & arg4, + arg5_t const & arg5, + arg6_t const & arg6 + ) { + container->add_worker(new worker_t(arg1, arg2, arg3, arg4, arg5, arg6)); + } + + template<typename worker_t, typename arg1_t, typename arg2_t, typename arg3_t, typename arg4_t, + typename arg5_t, typename arg6_t, typename arg7_t> + inline static void add_worker_node( + expert_container::sptr container, + arg1_t const & arg1, + arg2_t const & arg2, + arg3_t const & arg3, + arg4_t const & arg4, + arg5_t const & arg5, + arg6_t const & arg6, + arg7_t const & arg7 + ) { + container->add_worker(new worker_t(arg1, arg2, arg3, arg4, arg5, arg6, arg7)); + } + + template<typename worker_t, typename arg1_t, typename arg2_t, typename arg3_t, typename arg4_t, + typename arg5_t, typename arg6_t, typename arg7_t, typename arg8_t> + inline static void add_worker_node( + expert_container::sptr container, + arg1_t const & arg1, + arg2_t const & arg2, + arg3_t const & arg3, + arg4_t const & arg4, + arg5_t const & arg5, + arg6_t const & arg6, + arg7_t const & arg7, + arg7_t const & arg8 + ) { + container->add_worker(new worker_t(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8)); + } + }; +}} + +#endif /* INCLUDED_UHD_EXPERTS_EXPERT_FACTORY_HPP */ diff --git a/host/lib/experts/expert_nodes.hpp b/host/lib/experts/expert_nodes.hpp new file mode 100644 index 000000000..dc5cc934b --- /dev/null +++ b/host/lib/experts/expert_nodes.hpp @@ -0,0 +1,475 @@ +// +// Copyright 2016 Ettus Research +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_EXPERTS_EXPERT_NODES_HPP +#define INCLUDED_UHD_EXPERTS_EXPERT_NODES_HPP + +#include <uhd/config.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/dirty_tracked.hpp> +#include <boost/function.hpp> +#include <boost/foreach.hpp> +#include <boost/thread/recursive_mutex.hpp> +#include <boost/thread.hpp> +#include <boost/units/detail/utility.hpp> +#include <memory> +#include <list> + +namespace uhd { namespace experts { + + enum node_class_t { CLASS_WORKER, CLASS_DATA, CLASS_PROPERTY }; + enum node_access_t { ACCESS_READER, ACCESS_WRITER }; + enum node_author_t { AUTHOR_NONE, AUTHOR_USER, AUTHOR_EXPERT }; + + /*!--------------------------------------------------------- + * class dag_vertex_t + * + * This serves as the base class for all nodes in the expert + * graph. Data nodes and workers are derived from this class. + * --------------------------------------------------------- + */ + class dag_vertex_t : private boost::noncopyable { + public: + typedef boost::function<void(std::string)> callback_func_t; + + virtual ~dag_vertex_t() {} + + // Getters for basic info about the node + inline node_class_t get_class() const { + return _class; + } + + inline const std::string& get_name() const { + return _name; + } + + virtual const std::string& get_dtype() const = 0; + + virtual std::string to_string() const = 0; + + // Graph resolution specific + virtual bool is_dirty() const = 0; + virtual void mark_clean() = 0; + virtual void resolve() = 0; + + // External callbacks + virtual void set_write_callback(const callback_func_t& func) = 0; + virtual bool has_write_callback() const = 0; + virtual void clear_write_callback() = 0; + virtual void set_read_callback(const callback_func_t& func) = 0; + virtual bool has_read_callback() const = 0; + virtual void clear_read_callback() = 0; + + protected: + dag_vertex_t(const node_class_t c, const std::string& n): + _class(c), _name(n) {} + + private: + const node_class_t _class; + const std::string _name; + }; + + class data_node_printer { + public: + //Generic implementation + template<typename data_t> + static std::string print(const data_t& val) { + std::ostringstream os; + os << val; + return os.str(); + } + + static std::string print(const boost::uint8_t& val) { + std::ostringstream os; + os << int(val); + return os.str(); + } + }; + + /*!--------------------------------------------------------- + * class data_node_t + * + * The data node class hold a passive piece of data in the + * expert graph. A data node is clean if its underlying data + * is clean. Access to the underlying data is provided using + * two methods: + * 1. Special accessor classes (for R/W enforcement) + * 2. External clients (via commit and retrieve). This access + * is protected by the callback mutex. + * + * Requirements for data_t + * - Must have a default constructor + * - Must have a copy constructor + * - Must have an assignment operator (=) + * - Must have an equality operator (==) + * --------------------------------------------------------- + */ + template<typename data_t> + class data_node_t : public dag_vertex_t { + public: + // A data_node_t instance can have a type of CLASS_DATA or CLASS_PROPERTY + // In general a data node is a property if it can be accessed and modified + // from the outside world (of experts) using read and write callbacks. We + // assume that if a callback mutex is passed into the data node that it will + // be accessed from the outside and tag the data node as a PROPERTY. + data_node_t(const std::string& name, boost::recursive_mutex* mutex = NULL) : + dag_vertex_t(mutex?CLASS_PROPERTY:CLASS_DATA, name), _callback_mutex(mutex), _data(), _author(AUTHOR_NONE) {} + + data_node_t(const std::string& name, const data_t& value, boost::recursive_mutex* mutex = NULL) : + dag_vertex_t(mutex?CLASS_PROPERTY:CLASS_DATA, name), _callback_mutex(mutex), _data(value), _author(AUTHOR_NONE) {} + + // Basic info + virtual const std::string& get_dtype() const { + static const std::string dtype( + boost::units::detail::demangle(typeid(data_t).name())); + return dtype; + } + + virtual std::string to_string() const { + return data_node_printer::print(get()); + } + + inline node_author_t get_author() const { + return _author; + } + + // Graph resolution specific + virtual bool is_dirty() const { + return _data.is_dirty(); + } + + virtual void mark_clean() { + _data.mark_clean(); + } + + void resolve() { + //NOP + } + + // Data node specific setters and getters (for the framework) + void set(const data_t& value) { + _data = value; + _author = AUTHOR_EXPERT; + } + + const data_t& get() const { + return _data; + } + + // Data node specific setters and getters (for external entities) + void commit(const data_t& value) { + if (_callback_mutex == NULL) throw uhd::assertion_error("node " + get_name() + " is missing the callback mutex"); + boost::lock_guard<boost::recursive_mutex> lock(*_callback_mutex); + set(value); + _author = AUTHOR_USER; + if (is_dirty() and has_write_callback()) { + _wr_callback(std::string(get_name())); //Put the name on the stack before calling + } + } + + const data_t retrieve() const { + if (_callback_mutex == NULL) throw uhd::assertion_error("node " + get_name() + " is missing the callback mutex"); + boost::lock_guard<boost::recursive_mutex> lock(*_callback_mutex); + if (has_read_callback()) { + _rd_callback(std::string(get_name())); + } + return get(); + } + + private: + // External callbacks + virtual void set_write_callback(const callback_func_t& func) { + _wr_callback = func; + } + + virtual bool has_write_callback() const { + return not _wr_callback.empty(); + } + + virtual void clear_write_callback() { + _wr_callback.clear(); + } + + virtual void set_read_callback(const callback_func_t& func) { + _rd_callback = func; + } + + virtual bool has_read_callback() const { + return not _rd_callback.empty(); + } + + virtual void clear_read_callback() { + _rd_callback.clear(); + } + + boost::recursive_mutex* _callback_mutex; + callback_func_t _rd_callback; + callback_func_t _wr_callback; + dirty_tracked<data_t> _data; + node_author_t _author; + }; + + /*!--------------------------------------------------------- + * class node_retriever_t + * + * Node storage is managed by a framework class so we need + * and interface to find and retrieve data nodes to associate + * with accessors. + * --------------------------------------------------------- + */ + class node_retriever_t { + public: + virtual ~node_retriever_t() {} + virtual const dag_vertex_t& lookup(const std::string& name) const = 0; + private: + friend class data_accessor_t; + virtual dag_vertex_t& retrieve(const std::string& name) const = 0; + }; + + /*!--------------------------------------------------------- + * class data_accessor_t + * + * Accessors provide protected access to data nodes and help + * establish dependency relationships. + * --------------------------------------------------------- + */ + class data_accessor_t { + public: + virtual ~data_accessor_t() {} + + virtual bool is_reader() const = 0; + virtual bool is_writer() const = 0; + virtual dag_vertex_t& node() const = 0; + protected: + data_accessor_t(const node_retriever_t& r, const std::string& n): + _vertex(r.retrieve(n)) {} + dag_vertex_t& _vertex; + }; + + template<typename data_t> + class data_accessor_base : public data_accessor_t { + public: + virtual ~data_accessor_base() {} + + virtual bool is_reader() const { + return _access == ACCESS_READER; + } + + virtual bool is_writer() const { + return _access == ACCESS_WRITER; + } + + inline bool is_dirty() const { + return _datanode->is_dirty(); + } + + inline node_class_t get_class() const { + return _datanode->get_class(); + } + + inline node_author_t get_author() const { + return _datanode->get_author(); + } + + protected: + data_accessor_base( + const node_retriever_t& r, const std::string& n, const node_access_t a) : + data_accessor_t(r, n), _datanode(NULL), _access(a) + { + _datanode = dynamic_cast< data_node_t<data_t>* >(&node()); + if (_datanode == NULL) { + throw uhd::type_error("Expected data type for node " + n + + " was " + boost::units::detail::demangle(typeid(data_t).name()) + + " but got " + node().get_dtype()); + } + } + + data_node_t<data_t>* _datanode; + const node_access_t _access; + + private: + virtual dag_vertex_t& node() const { + return _vertex; + } + }; + + /*!--------------------------------------------------------- + * class data_reader_t + * + * Accessor to read the value of a data node and to establish + * a data node => worker node dependency + * --------------------------------------------------------- + */ + template<typename data_t> + class data_reader_t : public data_accessor_base<data_t> { + public: + data_reader_t(const node_retriever_t& retriever, const std::string& node) : + data_accessor_base<data_t>( + retriever, node, ACCESS_READER) {} + + inline const data_t& get() const { + return data_accessor_base<data_t>::_datanode->get(); + } + + inline operator const data_t&() const { + return get(); + } + + inline bool operator==(const data_t& rhs) { + return get() == rhs; + } + + inline bool operator!=(const data_t& rhs) { + return !(get() == rhs); + } + }; + + /*!--------------------------------------------------------- + * class data_reader_t + * + * Accessor to read and write the value of a data node and + * to establish a worker node => data node dependency + * --------------------------------------------------------- + */ + template<typename data_t> + class data_writer_t : public data_accessor_base<data_t> { + public: + data_writer_t(const node_retriever_t& retriever, const std::string& node) : + data_accessor_base<data_t>( + retriever, node, ACCESS_WRITER) {} + + inline const data_t& get() const { + return data_accessor_base<data_t>::_datanode->get(); + } + + inline operator const data_t&() const { + return get(); + } + + inline bool operator==(const data_t& rhs) { + return get() == rhs; + } + + inline bool operator!=(const data_t& rhs) { + return !(get() == rhs); + } + + inline void set(const data_t& value) { + data_accessor_base<data_t>::_datanode->set(value); + } + + inline data_writer_t<data_t>& operator=(const data_t& value) { + set(value); + return *this; + } + + inline data_writer_t<data_t>& operator=(const data_writer_t<data_t>& value) { + set(value.get()); + return *this; + } +}; + + /*!--------------------------------------------------------- + * class worker_node_t + * + * A node class to implement a function that consumes + * zero or more input data nodes and emits zeroor more output + * data nodes. The worker can also operate on other non-expert + * interfaces because worker_node_t is abstract and the client + * is required to implement the "resolve" method in a subclass. + * --------------------------------------------------------- + */ + class worker_node_t : public dag_vertex_t { + public: + worker_node_t(const std::string& name) : + dag_vertex_t(CLASS_WORKER, name) {} + + // Worker node specific + std::list<std::string> get_inputs() const { + std::list<std::string> retval; + BOOST_FOREACH(data_accessor_t* acc, _inputs) { + retval.push_back(acc->node().get_name()); + } + return retval; + } + + std::list<std::string> get_outputs() const { + std::list<std::string> retval; + BOOST_FOREACH(data_accessor_t* acc, _outputs) { + retval.push_back(acc->node().get_name()); + } + return retval; + } + + protected: + // This function is used to bind data accessors + // to this worker. Accessors can be read/write + // and the binding will ensure proper dependency + // handling. + void bind_accessor(data_accessor_t& accessor) { + if (accessor.is_reader()) { + _inputs.push_back(&accessor); + } else if (accessor.is_writer()) { + _outputs.push_back(&accessor); + } else { + throw uhd::assertion_error("Invalid accessor type"); + } + } + + private: + // Graph resolution specific + virtual bool is_dirty() const { + bool inputs_dirty = false; + BOOST_FOREACH(data_accessor_t* acc, _inputs) { + inputs_dirty |= acc->node().is_dirty(); + } + return inputs_dirty; + } + + virtual void mark_clean() { + BOOST_FOREACH(data_accessor_t* acc, _inputs) { + acc->node().mark_clean(); + } + } + + virtual void resolve() = 0; + + // Basic type info + virtual const std::string& get_dtype() const { + static const std::string dtype = "<worker>"; + return dtype; + } + + virtual std::string to_string() const { + return "<worker>"; + } + + // Workers don't have callbacks so implement stubs + virtual void set_write_callback(const callback_func_t&) {} + virtual bool has_write_callback() const { return false; } + virtual void clear_write_callback() {} + virtual void set_read_callback(const callback_func_t&) {} + virtual bool has_read_callback() const { return false; } + virtual void clear_read_callback() {} + + std::list<data_accessor_t*> _inputs; + std::list<data_accessor_t*> _outputs; + }; + +}} + +#endif /* INCLUDED_UHD_EXPERTS_EXPERT_NODE_HPP */ diff --git a/host/lib/property_tree.cpp b/host/lib/property_tree.cpp index 039f05f12..76d7bccba 100644 --- a/host/lib/property_tree.cpp +++ b/host/lib/property_tree.cpp @@ -1,5 +1,5 @@ // -// Copyright 2011,2014 Ettus Research LLC +// Copyright 2011,2014-2016 Ettus Research // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by diff --git a/host/lib/transport/CMakeLists.txt b/host/lib/transport/CMakeLists.txt index 6abc399b4..79c8a90b7 100644 --- a/host/lib/transport/CMakeLists.txt +++ b/host/lib/transport/CMakeLists.txt @@ -22,17 +22,15 @@ ######################################################################## # Include subdirectories (different than add) ######################################################################## -INCLUDE_SUBDIRECTORY(nirio) +IF(ENABLE_X300) + INCLUDE_SUBDIRECTORY(nirio) +ENDIF(ENABLE_X300) ######################################################################## # Setup libusb ######################################################################## -MESSAGE(STATUS "") -FIND_PACKAGE(USB1) - -LIBUHD_REGISTER_COMPONENT("USB" ENABLE_USB ON "ENABLE_LIBUHD;LIBUSB_FOUND" OFF OFF) - IF(ENABLE_USB) + MESSAGE(STATUS "") MESSAGE(STATUS "USB support enabled via libusb.") INCLUDE_DIRECTORIES(${LIBUSB_INCLUDE_DIRS}) LIBUHD_APPEND_LIBS(${LIBUSB_LIBRARIES}) @@ -128,10 +126,15 @@ LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/buffer_pool.cpp ${CMAKE_CURRENT_SOURCE_DIR}/if_addrs.cpp ${CMAKE_CURRENT_SOURCE_DIR}/udp_simple.cpp - ${CMAKE_CURRENT_SOURCE_DIR}/nirio_zero_copy.cpp ${CMAKE_CURRENT_SOURCE_DIR}/chdr.cpp ) +IF(ENABLE_X300) + LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/nirio_zero_copy.cpp + ) +ENDIF(ENABLE_X300) + # Verbose Debug output for send/recv SET( UHD_TXRX_DEBUG_PRINTS OFF CACHE BOOL "Use verbose debug output for send/recv" ) OPTION( UHD_TXRX_DEBUG_PRINTS "Use verbose debug output for send/recv" "" ) diff --git a/host/lib/transport/nirio/lvbitx/CMakeLists.txt b/host/lib/transport/nirio/lvbitx/CMakeLists.txt index b9a2a9f15..5741a12f8 100644 --- a/host/lib/transport/nirio/lvbitx/CMakeLists.txt +++ b/host/lib/transport/nirio/lvbitx/CMakeLists.txt @@ -1,5 +1,5 @@ # -# Copyright 2013 Ettus Research LLC +# Copyright 2013,2015 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -30,8 +30,8 @@ MACRO(LIBUHD_LVBITX_GEN_SOURCE_AND_BITSTREAM lvbitx binfile) SET(IMAGES_PATH_OPT --uhd-images-path=${UHD_IMAGES_DIR}) ADD_CUSTOM_COMMAND( - OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${lvbitxprefix}_lvbitx.hpp OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${lvbitxprefix}_lvbitx.cpp + OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${lvbitxprefix}_lvbitx.hpp DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/process-lvbitx.py DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/template_lvbitx.hpp DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/template_lvbitx.cpp @@ -41,6 +41,7 @@ MACRO(LIBUHD_LVBITX_GEN_SOURCE_AND_BITSTREAM lvbitx binfile) ) #make libuhd depend on the output file + LIBUHD_APPEND_SOURCES(${CMAKE_CURRENT_BINARY_DIR}/${lvbitxprefix}_lvbitx.hpp) LIBUHD_APPEND_SOURCES(${CMAKE_CURRENT_BINARY_DIR}/${lvbitxprefix}_lvbitx.cpp) ENDMACRO(LIBUHD_LVBITX_GEN_SOURCE_AND_BITSTREAM) diff --git a/host/lib/transport/nirio/rpc/rpc_client.cpp b/host/lib/transport/nirio/rpc/rpc_client.cpp index bbaf9f235..3d62b57ae 100644 --- a/host/lib/transport/nirio/rpc/rpc_client.cpp +++ b/host/lib/transport/nirio/rpc/rpc_client.cpp @@ -1,5 +1,5 @@ /// -// Copyright 2013 Ettus Research LLC +// Copyright 2013,2016 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -55,22 +55,7 @@ rpc_client::rpc_client ( tcp::resolver::query::flags query_flags(tcp::resolver::query::passive); tcp::resolver::query query(tcp::v4(), server, port, query_flags); tcp::resolver::iterator iterator = resolver.resolve(query); - - #if BOOST_VERSION < 104700 - // default constructor creates end iterator - tcp::resolver::iterator end; - - boost::system::error_code error = boost::asio::error::host_not_found; - while (error && iterator != end) - { - _socket.close(); - _socket.connect(*iterator++, error); - } - if (error) - throw boost::system::system_error(error); - #else - boost::asio::connect(_socket, iterator); - #endif + boost::asio::connect(_socket, iterator); UHD_LOG << "rpc_client connected to server." << std::endl; @@ -109,11 +94,6 @@ rpc_client::rpc_client ( } catch (boost::exception&) { UHD_LOG << "rpc_client connection request cancelled/aborted." << std::endl; _exec_err.assign(boost::asio::error::connection_aborted, boost::asio::error::get_system_category()); -#if BOOST_VERSION < 104700 - } catch (std::exception& e) { - UHD_LOG << "rpc_client connection error: " << e.what() << std::endl; - _exec_err.assign(boost::asio::error::connection_aborted, boost::asio::error::get_system_category()); -#endif } } diff --git a/host/lib/transport/super_recv_packet_handler.hpp b/host/lib/transport/super_recv_packet_handler.hpp index 8bfa1973a..28adff0d1 100644 --- a/host/lib/transport/super_recv_packet_handler.hpp +++ b/host/lib/transport/super_recv_packet_handler.hpp @@ -127,7 +127,7 @@ public: * \param threshold number of packets per channel */ void set_alignment_failure_threshold(const size_t threshold){ - _alignment_faulure_threshold = threshold*this->size(); + _alignment_failure_threshold = threshold*this->size(); } //! Set the rate of ticks per second @@ -203,6 +203,12 @@ public: //! Overload call to issue stream commands void issue_stream_cmd(const stream_cmd_t &stream_cmd) { + if (stream_cmd.stream_now + and stream_cmd.stream_mode != stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS + and _props.size() > 1) { + throw uhd::runtime_error("Attempting to do multi-channel receive with stream_now == true will result in misaligned channels. Aborting."); + } + for (size_t i = 0; i < _props.size(); i++) { if (_props[i].issue_stream_cmd) _props[i].issue_stream_cmd(stream_cmd); @@ -269,7 +275,7 @@ private: size_t _header_offset_words32; double _tick_rate, _samp_rate; bool _queue_error_for_next_call; - size_t _alignment_faulure_threshold; + size_t _alignment_failure_threshold; rx_metadata_t _queue_metadata; struct xport_chan_props_type{ xport_chan_props_type(void): @@ -593,7 +599,7 @@ private: } //too many iterations: detect alignment failure - if (iterations++ > _alignment_faulure_threshold){ + if (iterations++ > _alignment_failure_threshold){ UHD_MSG(error) << boost::format( "The receive packet handler failed to time-align packets.\n" "%u received packets were processed by the handler.\n" diff --git a/host/lib/types/sensors.cpp b/host/lib/types/sensors.cpp index 52a63d14c..0406e35d4 100644 --- a/host/lib/types/sensors.cpp +++ b/host/lib/types/sensors.cpp @@ -69,6 +69,12 @@ sensor_value_t::sensor_value_t( /* NOP */ } +sensor_value_t::sensor_value_t(const sensor_value_t& source) +{ + *this = source; +} + + std::string sensor_value_t::to_pp_string(void) const{ switch(type){ case BOOLEAN: @@ -92,3 +98,12 @@ signed sensor_value_t::to_int(void) const{ double sensor_value_t::to_real(void) const{ return boost::lexical_cast<double>(value); } + +sensor_value_t& sensor_value_t::operator=(const sensor_value_t& rhs) +{ + this->name = rhs.name; + this->value = rhs.value; + this->unit = rhs.unit; + this->type = rhs.type; + return *this; +} diff --git a/host/lib/usrp/CMakeLists.txt b/host/lib/usrp/CMakeLists.txt index 5c9592970..dde4f02c3 100644 --- a/host/lib/usrp/CMakeLists.txt +++ b/host/lib/usrp/CMakeLists.txt @@ -18,20 +18,18 @@ ######################################################################## # This file included, use CMake directory variables ######################################################################## -find_package(GPSD) - INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}) LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/dboard_base.cpp ${CMAKE_CURRENT_SOURCE_DIR}/dboard_eeprom.cpp ${CMAKE_CURRENT_SOURCE_DIR}/dboard_id.cpp - ${CMAKE_CURRENT_SOURCE_DIR}/dboard_iface.cpp ${CMAKE_CURRENT_SOURCE_DIR}/dboard_manager.cpp ${CMAKE_CURRENT_SOURCE_DIR}/gps_ctrl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/mboard_eeprom.cpp ${CMAKE_CURRENT_SOURCE_DIR}/multi_usrp.cpp ${CMAKE_CURRENT_SOURCE_DIR}/subdev_spec.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/fe_connection.cpp ) IF(ENABLE_C_API) @@ -43,8 +41,6 @@ IF(ENABLE_C_API) ) ENDIF(ENABLE_C_API) -LIBUHD_REGISTER_COMPONENT("GPSD" ENABLE_GPSD OFF "ENABLE_LIBUHD;ENABLE_GPSD;LIBGPS_FOUND" OFF OFF) - IF(ENABLE_GPSD) LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/gpsd_iface.cpp @@ -62,3 +58,4 @@ INCLUDE_SUBDIRECTORY(e100) INCLUDE_SUBDIRECTORY(e300) INCLUDE_SUBDIRECTORY(x300) INCLUDE_SUBDIRECTORY(b200) +INCLUDE_SUBDIRECTORY(n230) diff --git a/host/lib/usrp/b100/CMakeLists.txt b/host/lib/usrp/b100/CMakeLists.txt index 1558cd974..66129458c 100644 --- a/host/lib/usrp/b100/CMakeLists.txt +++ b/host/lib/usrp/b100/CMakeLists.txt @@ -22,8 +22,6 @@ ######################################################################## # Conditionally configure the B100 support ######################################################################## -LIBUHD_REGISTER_COMPONENT("B100" ENABLE_B100 ON "ENABLE_LIBUHD;ENABLE_USB" OFF OFF) - IF(ENABLE_B100) LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/b100_impl.cpp diff --git a/host/lib/usrp/b100/b100_impl.cpp b/host/lib/usrp/b100/b100_impl.cpp index c4279913c..eec9f0e9a 100644 --- a/host/lib/usrp/b100/b100_impl.cpp +++ b/host/lib/usrp/b100/b100_impl.cpp @@ -281,7 +281,7 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ _tree->create<std::string>(mb_path / "name").set("B100"); _tree->create<std::string>(mb_path / "codename").set("B-Hundo"); _tree->create<std::string>(mb_path / "load_eeprom") - .subscribe(boost::bind(&fx2_ctrl::usrp_load_eeprom, _fx2_ctrl, _1)); + .add_coerced_subscriber(boost::bind(&fx2_ctrl::usrp_load_eeprom, _fx2_ctrl, _1)); //////////////////////////////////////////////////////////////////// // setup the mboard eeprom @@ -289,20 +289,20 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ const mboard_eeprom_t mb_eeprom(*_fx2_ctrl, B100_EEPROM_MAP_KEY); _tree->create<mboard_eeprom_t>(mb_path / "eeprom") .set(mb_eeprom) - .subscribe(boost::bind(&b100_impl::set_mb_eeprom, this, _1)); + .add_coerced_subscriber(boost::bind(&b100_impl::set_mb_eeprom, this, _1)); //////////////////////////////////////////////////////////////////// // create clock control objects //////////////////////////////////////////////////////////////////// //^^^ clock created up top, just reg props here... ^^^ _tree->create<double>(mb_path / "tick_rate") - .publish(boost::bind(&b100_clock_ctrl::get_fpga_clock_rate, _clock_ctrl)) - .subscribe(boost::bind(&fifo_ctrl_excelsior::set_tick_rate, _fifo_ctrl, _1)) - .subscribe(boost::bind(&b100_impl::update_tick_rate, this, _1)); + .set_publisher(boost::bind(&b100_clock_ctrl::get_fpga_clock_rate, _clock_ctrl)) + .add_coerced_subscriber(boost::bind(&fifo_ctrl_excelsior::set_tick_rate, _fifo_ctrl, _1)) + .add_coerced_subscriber(boost::bind(&b100_impl::update_tick_rate, this, _1)); - //subscribe the command time while we are at it + //add_coerced_subscriber the command time while we are at it _tree->create<time_spec_t>(mb_path / "time/cmd") - .subscribe(boost::bind(&fifo_ctrl_excelsior::set_time, _fifo_ctrl, _1)); + .add_coerced_subscriber(boost::bind(&fifo_ctrl_excelsior::set_time, _fifo_ctrl, _1)); //////////////////////////////////////////////////////////////////// // create codec control objects @@ -313,20 +313,20 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ _tree->create<std::string>(rx_codec_path / "name").set("ad9522"); _tree->create<meta_range_t>(rx_codec_path / "gains/pga/range").set(b100_codec_ctrl::rx_pga_gain_range); _tree->create<double>(rx_codec_path / "gains/pga/value") - .coerce(boost::bind(&b100_impl::update_rx_codec_gain, this, _1)) + .set_coercer(boost::bind(&b100_impl::update_rx_codec_gain, this, _1)) .set(0.0); _tree->create<std::string>(tx_codec_path / "name").set("ad9522"); _tree->create<meta_range_t>(tx_codec_path / "gains/pga/range").set(b100_codec_ctrl::tx_pga_gain_range); _tree->create<double>(tx_codec_path / "gains/pga/value") - .subscribe(boost::bind(&b100_codec_ctrl::set_tx_pga_gain, _codec_ctrl, _1)) - .publish(boost::bind(&b100_codec_ctrl::get_tx_pga_gain, _codec_ctrl)) + .add_coerced_subscriber(boost::bind(&b100_codec_ctrl::set_tx_pga_gain, _codec_ctrl, _1)) + .set_publisher(boost::bind(&b100_codec_ctrl::get_tx_pga_gain, _codec_ctrl)) .set(0.0); //////////////////////////////////////////////////////////////////// // and do the misc mboard sensors //////////////////////////////////////////////////////////////////// _tree->create<sensor_value_t>(mb_path / "sensors/ref_locked") - .publish(boost::bind(&b100_impl::get_ref_locked, this)); + .set_publisher(boost::bind(&b100_impl::get_ref_locked, this)); //////////////////////////////////////////////////////////////////// // create frontend control objects @@ -335,27 +335,27 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ _tx_fe = tx_frontend_core_200::make(_fifo_ctrl, TOREG(SR_TX_FE)); _tree->create<subdev_spec_t>(mb_path / "rx_subdev_spec") - .subscribe(boost::bind(&b100_impl::update_rx_subdev_spec, this, _1)); + .add_coerced_subscriber(boost::bind(&b100_impl::update_rx_subdev_spec, this, _1)); _tree->create<subdev_spec_t>(mb_path / "tx_subdev_spec") - .subscribe(boost::bind(&b100_impl::update_tx_subdev_spec, this, _1)); + .add_coerced_subscriber(boost::bind(&b100_impl::update_tx_subdev_spec, this, _1)); const fs_path rx_fe_path = mb_path / "rx_frontends" / "A"; const fs_path tx_fe_path = mb_path / "tx_frontends" / "A"; _tree->create<std::complex<double> >(rx_fe_path / "dc_offset" / "value") - .coerce(boost::bind(&rx_frontend_core_200::set_dc_offset, _rx_fe, _1)) + .set_coercer(boost::bind(&rx_frontend_core_200::set_dc_offset, _rx_fe, _1)) .set(std::complex<double>(0.0, 0.0)); _tree->create<bool>(rx_fe_path / "dc_offset" / "enable") - .subscribe(boost::bind(&rx_frontend_core_200::set_dc_offset_auto, _rx_fe, _1)) + .add_coerced_subscriber(boost::bind(&rx_frontend_core_200::set_dc_offset_auto, _rx_fe, _1)) .set(true); _tree->create<std::complex<double> >(rx_fe_path / "iq_balance" / "value") - .subscribe(boost::bind(&rx_frontend_core_200::set_iq_balance, _rx_fe, _1)) + .add_coerced_subscriber(boost::bind(&rx_frontend_core_200::set_iq_balance, _rx_fe, _1)) .set(std::complex<double>(0.0, 0.0)); _tree->create<std::complex<double> >(tx_fe_path / "dc_offset" / "value") - .coerce(boost::bind(&tx_frontend_core_200::set_dc_offset, _tx_fe, _1)) + .set_coercer(boost::bind(&tx_frontend_core_200::set_dc_offset, _tx_fe, _1)) .set(std::complex<double>(0.0, 0.0)); _tree->create<std::complex<double> >(tx_fe_path / "iq_balance" / "value") - .subscribe(boost::bind(&tx_frontend_core_200::set_iq_balance, _tx_fe, _1)) + .add_coerced_subscriber(boost::bind(&tx_frontend_core_200::set_iq_balance, _tx_fe, _1)) .set(std::complex<double>(0.0, 0.0)); //////////////////////////////////////////////////////////////////// @@ -374,20 +374,20 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ _rx_dsps[dspno]->set_link_rate(B100_LINK_RATE_BPS); _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&rx_dsp_core_200::set_tick_rate, _rx_dsps[dspno], _1)); + .add_coerced_subscriber(boost::bind(&rx_dsp_core_200::set_tick_rate, _rx_dsps[dspno], _1)); fs_path rx_dsp_path = mb_path / str(boost::format("rx_dsps/%u") % dspno); _tree->create<meta_range_t>(rx_dsp_path / "rate/range") - .publish(boost::bind(&rx_dsp_core_200::get_host_rates, _rx_dsps[dspno])); + .set_publisher(boost::bind(&rx_dsp_core_200::get_host_rates, _rx_dsps[dspno])); _tree->create<double>(rx_dsp_path / "rate/value") .set(1e6) //some default - .coerce(boost::bind(&rx_dsp_core_200::set_host_rate, _rx_dsps[dspno], _1)) - .subscribe(boost::bind(&b100_impl::update_rx_samp_rate, this, dspno, _1)); + .set_coercer(boost::bind(&rx_dsp_core_200::set_host_rate, _rx_dsps[dspno], _1)) + .add_coerced_subscriber(boost::bind(&b100_impl::update_rx_samp_rate, this, dspno, _1)); _tree->create<double>(rx_dsp_path / "freq/value") - .coerce(boost::bind(&rx_dsp_core_200::set_freq, _rx_dsps[dspno], _1)); + .set_coercer(boost::bind(&rx_dsp_core_200::set_freq, _rx_dsps[dspno], _1)); _tree->create<meta_range_t>(rx_dsp_path / "freq/range") - .publish(boost::bind(&rx_dsp_core_200::get_freq_range, _rx_dsps[dspno])); + .set_publisher(boost::bind(&rx_dsp_core_200::get_freq_range, _rx_dsps[dspno])); _tree->create<stream_cmd_t>(rx_dsp_path / "stream_cmd") - .subscribe(boost::bind(&rx_dsp_core_200::issue_stream_command, _rx_dsps[dspno], _1)); + .add_coerced_subscriber(boost::bind(&rx_dsp_core_200::issue_stream_command, _rx_dsps[dspno], _1)); } //////////////////////////////////////////////////////////////////// @@ -398,17 +398,17 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ ); _tx_dsp->set_link_rate(B100_LINK_RATE_BPS); _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&tx_dsp_core_200::set_tick_rate, _tx_dsp, _1)); + .add_coerced_subscriber(boost::bind(&tx_dsp_core_200::set_tick_rate, _tx_dsp, _1)); _tree->create<meta_range_t>(mb_path / "tx_dsps/0/rate/range") - .publish(boost::bind(&tx_dsp_core_200::get_host_rates, _tx_dsp)); + .set_publisher(boost::bind(&tx_dsp_core_200::get_host_rates, _tx_dsp)); _tree->create<double>(mb_path / "tx_dsps/0/rate/value") .set(1e6) //some default - .coerce(boost::bind(&tx_dsp_core_200::set_host_rate, _tx_dsp, _1)) - .subscribe(boost::bind(&b100_impl::update_tx_samp_rate, this, 0, _1)); + .set_coercer(boost::bind(&tx_dsp_core_200::set_host_rate, _tx_dsp, _1)) + .add_coerced_subscriber(boost::bind(&b100_impl::update_tx_samp_rate, this, 0, _1)); _tree->create<double>(mb_path / "tx_dsps/0/freq/value") - .coerce(boost::bind(&tx_dsp_core_200::set_freq, _tx_dsp, _1)); + .set_coercer(boost::bind(&tx_dsp_core_200::set_freq, _tx_dsp, _1)); _tree->create<meta_range_t>(mb_path / "tx_dsps/0/freq/range") - .publish(boost::bind(&tx_dsp_core_200::get_freq_range, _tx_dsp)); + .set_publisher(boost::bind(&tx_dsp_core_200::get_freq_range, _tx_dsp)); //////////////////////////////////////////////////////////////////// // create time control objects @@ -422,21 +422,21 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ _fifo_ctrl, TOREG(SR_TIME64), time64_rb_bases ); _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&time64_core_200::set_tick_rate, _time64, _1)); + .add_coerced_subscriber(boost::bind(&time64_core_200::set_tick_rate, _time64, _1)); _tree->create<time_spec_t>(mb_path / "time/now") - .publish(boost::bind(&time64_core_200::get_time_now, _time64)) - .subscribe(boost::bind(&time64_core_200::set_time_now, _time64, _1)); + .set_publisher(boost::bind(&time64_core_200::get_time_now, _time64)) + .add_coerced_subscriber(boost::bind(&time64_core_200::set_time_now, _time64, _1)); _tree->create<time_spec_t>(mb_path / "time/pps") - .publish(boost::bind(&time64_core_200::get_time_last_pps, _time64)) - .subscribe(boost::bind(&time64_core_200::set_time_next_pps, _time64, _1)); + .set_publisher(boost::bind(&time64_core_200::get_time_last_pps, _time64)) + .add_coerced_subscriber(boost::bind(&time64_core_200::set_time_next_pps, _time64, _1)); //setup time source props _tree->create<std::string>(mb_path / "time_source/value") - .subscribe(boost::bind(&time64_core_200::set_time_source, _time64, _1)); + .add_coerced_subscriber(boost::bind(&time64_core_200::set_time_source, _time64, _1)); _tree->create<std::vector<std::string> >(mb_path / "time_source/options") - .publish(boost::bind(&time64_core_200::get_time_sources, _time64)); + .set_publisher(boost::bind(&time64_core_200::get_time_sources, _time64)); //setup reference source props _tree->create<std::string>(mb_path / "clock_source/value") - .subscribe(boost::bind(&b100_impl::update_clock_source, this, _1)); + .add_coerced_subscriber(boost::bind(&b100_impl::update_clock_source, this, _1)); static const std::vector<std::string> clock_sources = boost::assign::list_of("internal")("external")("auto"); _tree->create<std::vector<std::string> >(mb_path / "clock_source/options").set(clock_sources); @@ -445,7 +445,7 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ //////////////////////////////////////////////////////////////////// _user = user_settings_core_200::make(_fifo_ctrl, TOREG(SR_USER_REGS)); _tree->create<user_settings_core_200::user_reg_t>(mb_path / "user/regs") - .subscribe(boost::bind(&user_settings_core_200::set_reg, _user, _1)); + .add_coerced_subscriber(boost::bind(&user_settings_core_200::set_reg, _user, _1)); //////////////////////////////////////////////////////////////////// // create dboard control objects @@ -463,32 +463,31 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ //create the properties and register subscribers _tree->create<dboard_eeprom_t>(mb_path / "dboards/A/rx_eeprom") .set(rx_db_eeprom) - .subscribe(boost::bind(&b100_impl::set_db_eeprom, this, "rx", _1)); + .add_coerced_subscriber(boost::bind(&b100_impl::set_db_eeprom, this, "rx", _1)); _tree->create<dboard_eeprom_t>(mb_path / "dboards/A/tx_eeprom") .set(tx_db_eeprom) - .subscribe(boost::bind(&b100_impl::set_db_eeprom, this, "tx", _1)); + .add_coerced_subscriber(boost::bind(&b100_impl::set_db_eeprom, this, "tx", _1)); _tree->create<dboard_eeprom_t>(mb_path / "dboards/A/gdb_eeprom") .set(gdb_eeprom) - .subscribe(boost::bind(&b100_impl::set_db_eeprom, this, "gdb", _1)); + .add_coerced_subscriber(boost::bind(&b100_impl::set_db_eeprom, this, "gdb", _1)); //create a new dboard interface and manager - _dboard_iface = make_b100_dboard_iface(_fifo_ctrl, _fpga_i2c_ctrl, _fifo_ctrl/*spi*/, _clock_ctrl, _codec_ctrl); - _tree->create<dboard_iface::sptr>(mb_path / "dboards/A/iface").set(_dboard_iface); _dboard_manager = dboard_manager::make( rx_db_eeprom.id, tx_db_eeprom.id, gdb_eeprom.id, - _dboard_iface, _tree->subtree(mb_path / "dboards/A") + make_b100_dboard_iface(_fifo_ctrl, _fpga_i2c_ctrl, _fifo_ctrl/*spi*/, _clock_ctrl, _codec_ctrl), + _tree->subtree(mb_path / "dboards/A") ); //bind frontend corrections to the dboard freq props const fs_path db_tx_fe_path = mb_path / "dboards" / "A" / "tx_frontends"; BOOST_FOREACH(const std::string &name, _tree->list(db_tx_fe_path)){ _tree->access<double>(db_tx_fe_path / name / "freq" / "value") - .subscribe(boost::bind(&b100_impl::set_tx_fe_corrections, this, _1)); + .add_coerced_subscriber(boost::bind(&b100_impl::set_tx_fe_corrections, this, _1)); } const fs_path db_rx_fe_path = mb_path / "dboards" / "A" / "rx_frontends"; BOOST_FOREACH(const std::string &name, _tree->list(db_rx_fe_path)){ _tree->access<double>(db_rx_fe_path / name / "freq" / "value") - .subscribe(boost::bind(&b100_impl::set_rx_fe_corrections, this, _1)); + .add_coerced_subscriber(boost::bind(&b100_impl::set_rx_fe_corrections, this, _1)); } //initialize io handling @@ -503,8 +502,8 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ //////////////////////////////////////////////////////////////////// this->update_rates(); - _tree->access<double>(mb_path / "tick_rate") //now subscribe the clock rate setter - .subscribe(boost::bind(&b100_clock_ctrl::set_fpga_clock_rate, _clock_ctrl, _1)); + _tree->access<double>(mb_path / "tick_rate") //now add_coerced_subscriber the clock rate setter + .add_coerced_subscriber(boost::bind(&b100_clock_ctrl::set_fpga_clock_rate, _clock_ctrl, _1)); //reset cordic rates and their properties to zero BOOST_FOREACH(const std::string &name, _tree->list(mb_path / "rx_dsps")){ diff --git a/host/lib/usrp/b100/b100_impl.hpp b/host/lib/usrp/b100/b100_impl.hpp index 5a8f70d73..7f37030d2 100644 --- a/host/lib/usrp/b100/b100_impl.hpp +++ b/host/lib/usrp/b100/b100_impl.hpp @@ -126,7 +126,6 @@ private: //dboard stuff uhd::usrp::dboard_manager::sptr _dboard_manager; - uhd::usrp::dboard_iface::sptr _dboard_iface; bool _ignore_cal_file; std::vector<boost::weak_ptr<uhd::rx_streamer> > _rx_streamers; diff --git a/host/lib/usrp/b100/dboard_iface.cpp b/host/lib/usrp/b100/dboard_iface.cpp index 325efeec1..73c97c104 100644 --- a/host/lib/usrp/b100/dboard_iface.cpp +++ b/host/lib/usrp/b100/dboard_iface.cpp @@ -66,12 +66,16 @@ public: void write_aux_dac(unit_t, aux_dac_t, double); double read_aux_adc(unit_t, aux_adc_t); - void _set_pin_ctrl(unit_t, boost::uint16_t); - void _set_atr_reg(unit_t, atr_reg_t, boost::uint16_t); - void _set_gpio_ddr(unit_t, boost::uint16_t); - void _set_gpio_out(unit_t, boost::uint16_t); - void set_gpio_debug(unit_t, int); - boost::uint16_t read_gpio(unit_t); + void set_pin_ctrl(unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_pin_ctrl(unit_t unit); + void set_atr_reg(unit_t unit, atr_reg_t reg, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_atr_reg(unit_t unit, atr_reg_t reg); + void set_gpio_ddr(unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_gpio_ddr(unit_t unit); + void set_gpio_out(unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_gpio_out(unit_t unit); + boost::uint32_t read_gpio(unit_t unit); + void set_command_time(const uhd::time_spec_t& t); uhd::time_spec_t get_command_time(void); @@ -97,6 +101,7 @@ public: double get_clock_rate(unit_t); void set_clock_enabled(unit_t, bool); double get_codec_rate(unit_t); + void set_fe_connection(unit_t unit, const fe_connection_t& fe_conn); private: timed_wb_iface::sptr _wb_iface; @@ -127,6 +132,7 @@ void b100_dboard_iface::set_clock_rate(unit_t unit, double rate){ switch(unit){ case UNIT_RX: return _clock->set_rx_dboard_clock_rate(rate); case UNIT_TX: return _clock->set_tx_dboard_clock_rate(rate); + case UNIT_BOTH: set_clock_rate(UNIT_RX, rate); set_clock_rate(UNIT_TX, rate); return; } } @@ -142,14 +148,15 @@ double b100_dboard_iface::get_clock_rate(unit_t unit){ switch(unit){ case UNIT_RX: return _clock->get_rx_clock_rate(); case UNIT_TX: return _clock->get_tx_clock_rate(); + default: UHD_THROW_INVALID_CODE_PATH(); } - UHD_THROW_INVALID_CODE_PATH(); } void b100_dboard_iface::set_clock_enabled(unit_t unit, bool enb){ switch(unit){ case UNIT_RX: return _clock->enable_rx_dboard_clock(enb); case UNIT_TX: return _clock->enable_tx_dboard_clock(enb); + case UNIT_BOTH: set_clock_enabled(UNIT_RX, enb); set_clock_enabled(UNIT_TX, enb); return; } } @@ -160,28 +167,40 @@ double b100_dboard_iface::get_codec_rate(unit_t){ /*********************************************************************** * GPIO **********************************************************************/ -void b100_dboard_iface::_set_pin_ctrl(unit_t unit, boost::uint16_t value){ - return _gpio->set_pin_ctrl(unit, value); +void b100_dboard_iface::set_pin_ctrl(unit_t unit, boost::uint32_t value, boost::uint32_t mask){ + _gpio->set_pin_ctrl(unit, static_cast<boost::uint16_t>(value), static_cast<boost::uint16_t>(mask)); } -void b100_dboard_iface::_set_gpio_ddr(unit_t unit, boost::uint16_t value){ - return _gpio->set_gpio_ddr(unit, value); +boost::uint32_t b100_dboard_iface::get_pin_ctrl(unit_t unit){ + return static_cast<boost::uint32_t>(_gpio->get_pin_ctrl(unit)); } -void b100_dboard_iface::_set_gpio_out(unit_t unit, boost::uint16_t value){ - return _gpio->set_gpio_out(unit, value); +void b100_dboard_iface::set_atr_reg(unit_t unit, atr_reg_t reg, boost::uint32_t value, boost::uint32_t mask){ + _gpio->set_atr_reg(unit, reg, static_cast<boost::uint16_t>(value), static_cast<boost::uint16_t>(mask)); } -boost::uint16_t b100_dboard_iface::read_gpio(unit_t unit){ - return _gpio->read_gpio(unit); +boost::uint32_t b100_dboard_iface::get_atr_reg(unit_t unit, atr_reg_t reg){ + return static_cast<boost::uint32_t>(_gpio->get_atr_reg(unit, reg)); +} + +void b100_dboard_iface::set_gpio_ddr(unit_t unit, boost::uint32_t value, boost::uint32_t mask){ + _gpio->set_gpio_ddr(unit, static_cast<boost::uint16_t>(value), static_cast<boost::uint16_t>(mask)); +} + +boost::uint32_t b100_dboard_iface::get_gpio_ddr(unit_t unit){ + return static_cast<boost::uint32_t>(_gpio->get_gpio_ddr(unit)); } -void b100_dboard_iface::_set_atr_reg(unit_t unit, atr_reg_t atr, boost::uint16_t value){ - return _gpio->set_atr_reg(unit, atr, value); +void b100_dboard_iface::set_gpio_out(unit_t unit, boost::uint32_t value, boost::uint32_t mask){ + _gpio->set_gpio_out(unit, static_cast<boost::uint16_t>(value), static_cast<boost::uint16_t>(mask)); } -void b100_dboard_iface::set_gpio_debug(unit_t, int){ - throw uhd::not_implemented_error("no set_gpio_debug implemented"); +boost::uint32_t b100_dboard_iface::get_gpio_out(unit_t unit){ + return static_cast<boost::uint32_t>(_gpio->get_gpio_out(unit)); +} + +boost::uint32_t b100_dboard_iface::read_gpio(unit_t unit){ + return _gpio->read_gpio(unit); } /*********************************************************************** @@ -196,8 +215,8 @@ static boost::uint32_t unit_to_otw_spi_dev(dboard_iface::unit_t unit){ switch(unit){ case dboard_iface::UNIT_TX: return B100_SPI_SS_TX_DB; case dboard_iface::UNIT_RX: return B100_SPI_SS_RX_DB; + default: UHD_THROW_INVALID_CODE_PATH(); } - UHD_THROW_INVALID_CODE_PATH(); } void b100_dboard_iface::write_spi( @@ -268,3 +287,8 @@ uhd::time_spec_t b100_dboard_iface::get_command_time(void) { return _wb_iface->get_time(); } + +void b100_dboard_iface::set_fe_connection(unit_t, const fe_connection_t&) +{ + throw uhd::not_implemented_error("fe connection configuration support not implemented"); +} diff --git a/host/lib/usrp/b200/CMakeLists.txt b/host/lib/usrp/b200/CMakeLists.txt index 76710dc65..4b9e2de55 100644 --- a/host/lib/usrp/b200/CMakeLists.txt +++ b/host/lib/usrp/b200/CMakeLists.txt @@ -22,8 +22,6 @@ ######################################################################## # Conditionally configure the B200 support ######################################################################## -LIBUHD_REGISTER_COMPONENT("B200" ENABLE_B200 ON "ENABLE_LIBUHD;ENABLE_USB" OFF OFF) - IF(ENABLE_B200) LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/b200_image_loader.cpp diff --git a/host/lib/usrp/b200/b200_impl.cpp b/host/lib/usrp/b200/b200_impl.cpp index 18dcdadba..bfb32b2c8 100644 --- a/host/lib/usrp/b200/b200_impl.cpp +++ b/host/lib/usrp/b200/b200_impl.cpp @@ -41,6 +41,7 @@ using namespace uhd; using namespace uhd::usrp; +using namespace uhd::usrp::gpio_atr; using namespace uhd::transport; static const boost::posix_time::milliseconds REENUMERATION_TIMEOUT_MS(3000); @@ -363,7 +364,7 @@ b200_impl::b200_impl(const uhd::device_addr_t& device_addr, usb_device_handle::s const mboard_eeprom_t mb_eeprom(*_iface, "B200"); _tree->create<mboard_eeprom_t>(mb_path / "eeprom") .set(mb_eeprom) - .subscribe(boost::bind(&b200_impl::set_mb_eeprom, this, _1)); + .add_coerced_subscriber(boost::bind(&b200_impl::set_mb_eeprom, this, _1)); //////////////////////////////////////////////////////////////////// // Identify the device type @@ -501,7 +502,7 @@ b200_impl::b200_impl(const uhd::device_addr_t& device_addr, usb_device_handle::s BOOST_FOREACH(const std::string &name, _gps->get_sensors()) { _tree->create<sensor_value_t>(mb_path / "sensors" / name) - .publish(boost::bind(&gps_ctrl::get_sensor, _gps, name)); + .set_publisher(boost::bind(&gps_ctrl::get_sensor, _gps, name)); } } else @@ -578,9 +579,9 @@ b200_impl::b200_impl(const uhd::device_addr_t& device_addr, usb_device_handle::s // create clock control objects //////////////////////////////////////////////////////////////////// _tree->create<double>(mb_path / "tick_rate") - .coerce(boost::bind(&b200_impl::set_tick_rate, this, _1)) - .publish(boost::bind(&b200_impl::get_tick_rate, this)) - .subscribe(boost::bind(&b200_impl::update_tick_rate, this, _1)); + .set_coercer(boost::bind(&b200_impl::set_tick_rate, this, _1)) + .set_publisher(boost::bind(&b200_impl::get_tick_rate, this)) + .add_coerced_subscriber(boost::bind(&b200_impl::update_tick_rate, this, _1)); _tree->create<time_spec_t>(mb_path / "time" / "cmd"); _tree->create<bool>(mb_path / "auto_tick_rate").set(false); @@ -588,7 +589,7 @@ b200_impl::b200_impl(const uhd::device_addr_t& device_addr, usb_device_handle::s // and do the misc mboard sensors //////////////////////////////////////////////////////////////////// _tree->create<sensor_value_t>(mb_path / "sensors" / "ref_locked") - .publish(boost::bind(&b200_impl::get_ref_locked, this)); + .set_publisher(boost::bind(&b200_impl::get_ref_locked, this)); //////////////////////////////////////////////////////////////////// // create frontend mapping @@ -597,13 +598,13 @@ b200_impl::b200_impl(const uhd::device_addr_t& device_addr, usb_device_handle::s _tree->create<std::vector<size_t> >(mb_path / "rx_chan_dsp_mapping").set(default_map); _tree->create<std::vector<size_t> >(mb_path / "tx_chan_dsp_mapping").set(default_map); _tree->create<subdev_spec_t>(mb_path / "rx_subdev_spec") - .coerce(boost::bind(&b200_impl::coerce_subdev_spec, this, _1)) + .set_coercer(boost::bind(&b200_impl::coerce_subdev_spec, this, _1)) .set(subdev_spec_t()) - .subscribe(boost::bind(&b200_impl::update_subdev_spec, this, "rx", _1)); + .add_coerced_subscriber(boost::bind(&b200_impl::update_subdev_spec, this, "rx", _1)); _tree->create<subdev_spec_t>(mb_path / "tx_subdev_spec") - .coerce(boost::bind(&b200_impl::coerce_subdev_spec, this, _1)) + .set_coercer(boost::bind(&b200_impl::coerce_subdev_spec, this, _1)) .set(subdev_spec_t()) - .subscribe(boost::bind(&b200_impl::update_subdev_spec, this, "tx", _1)); + .add_coerced_subscriber(boost::bind(&b200_impl::update_subdev_spec, this, "tx", _1)); //////////////////////////////////////////////////////////////////// // setup radio control @@ -627,18 +628,18 @@ b200_impl::b200_impl(const uhd::device_addr_t& device_addr, usb_device_handle::s //register time now and pps onto available radio cores _tree->create<time_spec_t>(mb_path / "time" / "now") - .publish(boost::bind(&time_core_3000::get_time_now, _radio_perifs[0].time64)) - .subscribe(boost::bind(&b200_impl::set_time, this, _1)) + .set_publisher(boost::bind(&time_core_3000::get_time_now, _radio_perifs[0].time64)) + .add_coerced_subscriber(boost::bind(&b200_impl::set_time, this, _1)) .set(0.0); //re-sync the times when the tick rate changes _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&b200_impl::sync_times, this)); + .add_coerced_subscriber(boost::bind(&b200_impl::sync_times, this)); _tree->create<time_spec_t>(mb_path / "time" / "pps") - .publish(boost::bind(&time_core_3000::get_time_last_pps, _radio_perifs[0].time64)); + .set_publisher(boost::bind(&time_core_3000::get_time_last_pps, _radio_perifs[0].time64)); BOOST_FOREACH(radio_perifs_t &perif, _radio_perifs) { _tree->access<time_spec_t>(mb_path / "time" / "pps") - .subscribe(boost::bind(&time_core_3000::set_time_next_pps, perif.time64, _1)); + .add_coerced_subscriber(boost::bind(&time_core_3000::set_time_next_pps, perif.time64, _1)); } //setup time source props @@ -648,8 +649,8 @@ b200_impl::b200_impl(const uhd::device_addr_t& device_addr, usb_device_handle::s _tree->create<std::vector<std::string> >(mb_path / "time_source" / "options") .set(time_sources); _tree->create<std::string>(mb_path / "time_source" / "value") - .coerce(boost::bind(&check_option_valid, "time source", time_sources, _1)) - .subscribe(boost::bind(&b200_impl::update_time_source, this, _1)); + .set_coercer(boost::bind(&check_option_valid, "time source", time_sources, _1)) + .add_coerced_subscriber(boost::bind(&b200_impl::update_time_source, this, _1)); //setup reference source props static const std::vector<std::string> clock_sources = (_gpsdo_capable) ? boost::assign::list_of("internal")("external")("gpsdo") : @@ -657,21 +658,21 @@ b200_impl::b200_impl(const uhd::device_addr_t& device_addr, usb_device_handle::s _tree->create<std::vector<std::string> >(mb_path / "clock_source" / "options") .set(clock_sources); _tree->create<std::string>(mb_path / "clock_source" / "value") - .coerce(boost::bind(&check_option_valid, "clock source", clock_sources, _1)) - .subscribe(boost::bind(&b200_impl::update_clock_source, this, _1)); + .set_coercer(boost::bind(&check_option_valid, "clock source", clock_sources, _1)) + .add_coerced_subscriber(boost::bind(&b200_impl::update_clock_source, this, _1)); //////////////////////////////////////////////////////////////////// // front panel gpio //////////////////////////////////////////////////////////////////// - _radio_perifs[0].fp_gpio = gpio_core_200::make(_radio_perifs[0].ctrl, TOREG(SR_FP_GPIO), RB32_FP_GPIO); + _radio_perifs[0].fp_gpio = gpio_atr_3000::make(_radio_perifs[0].ctrl, TOREG(SR_FP_GPIO), RB32_FP_GPIO); BOOST_FOREACH(const gpio_attr_map_t::value_type attr, gpio_attr_map) { _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / attr.second) .set(0) - .subscribe(boost::bind(&b200_impl::set_fp_gpio, this, _radio_perifs[0].fp_gpio, attr.first, _1)); + .add_coerced_subscriber(boost::bind(&gpio_atr_3000::set_gpio_attr, _radio_perifs[0].fp_gpio, attr.first, _1)); } _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / "READBACK") - .publish(boost::bind(&b200_impl::get_fp_gpio, this, _radio_perifs[0].fp_gpio)); + .set_publisher(boost::bind(&gpio_atr_3000::read_gpio, _radio_perifs[0].fp_gpio)); //////////////////////////////////////////////////////////////////// // dboard eeproms but not really @@ -684,10 +685,14 @@ b200_impl::b200_impl(const uhd::device_addr_t& device_addr, usb_device_handle::s //////////////////////////////////////////////////////////////////// // do some post-init tasks //////////////////////////////////////////////////////////////////// - - //init the clock rate to something reasonable - double default_tick_rate = device_addr.cast<double>("master_clock_rate", ad936x_manager::DEFAULT_TICK_RATE); + // Init the clock rate and the auto mcr appropriately + if (not device_addr.has_key("master_clock_rate")) { + UHD_MSG(status) << "Setting master clock rate selection to 'automatic'." << std::endl; + } + // We can automatically choose a master clock rate, but not if the user specifies one + const double default_tick_rate = device_addr.cast<double>("master_clock_rate", ad936x_manager::DEFAULT_TICK_RATE); _tree->access<double>(mb_path / "tick_rate").set(default_tick_rate); + _tree->access<bool>(mb_path / "auto_tick_rate").set(not device_addr.has_key("master_clock_rate")); //subdev spec contains full width of selections subdev_spec_t rx_spec, tx_spec; @@ -711,12 +716,6 @@ b200_impl::b200_impl(const uhd::device_addr_t& device_addr, usb_device_handle::s _radio_perifs[i].ddc->set_host_rate(default_tick_rate / ad936x_manager::DEFAULT_DECIM); _radio_perifs[i].duc->set_host_rate(default_tick_rate / ad936x_manager::DEFAULT_INTERP); } - // We can automatically choose a master clock rate, but not if the user specifies one - _tree->access<bool>(mb_path / "auto_tick_rate").set(not device_addr.has_key("master_clock_rate")); - if (not device_addr.has_key("master_clock_rate")) { - UHD_MSG(status) << "Setting master clock rate selection to 'automatic'." << std::endl; - } - } b200_impl::~b200_impl(void) @@ -752,22 +751,23 @@ void b200_impl::setup_radio(const size_t dspno) perif.ctrl->hold_task(_async_task); _async_task_data->radio_ctrl[dspno] = perif.ctrl; //weak _tree->access<time_spec_t>(mb_path / "time" / "cmd") - .subscribe(boost::bind(&radio_ctrl_core_3000::set_time, perif.ctrl, _1)); + .add_coerced_subscriber(boost::bind(&radio_ctrl_core_3000::set_time, perif.ctrl, _1)); _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&radio_ctrl_core_3000::set_tick_rate, perif.ctrl, _1)); + .add_coerced_subscriber(boost::bind(&radio_ctrl_core_3000::set_tick_rate, perif.ctrl, _1)); this->register_loopback_self_test(perif.ctrl); //////////////////////////////////////////////////////////////////// // Set up peripherals //////////////////////////////////////////////////////////////////// - perif.atr = gpio_core_200_32wo::make(perif.ctrl, TOREG(SR_ATR)); + perif.atr = gpio_atr_3000::make_write_only(perif.ctrl, TOREG(SR_ATR)); + perif.atr->set_atr_mode(MODE_ATR, 0xFFFFFFFF); // create rx dsp control objects perif.framer = rx_vita_core_3000::make(perif.ctrl, TOREG(SR_RX_CTRL)); perif.ddc = rx_dsp_core_3000::make(perif.ctrl, TOREG(SR_RX_DSP), true /*is_b200?*/); perif.ddc->set_link_rate(10e9/8); //whatever - perif.ddc->set_mux("IQ", false, dspno == 1 ? true : false, dspno == 1 ? true : false); + perif.ddc->set_mux(usrp::fe_connection_t(dspno == 1 ? "IbQb" : "IQ")); perif.ddc->set_freq(rx_dsp_core_3000::DEFAULT_CORDIC_FREQ); - perif.deframer = tx_vita_core_3000::make(perif.ctrl, TOREG(SR_TX_CTRL)); + perif.deframer = tx_vita_core_3000::make_no_radio_buff(perif.ctrl, TOREG(SR_TX_CTRL)); perif.duc = tx_dsp_core_3000::make(perif.ctrl, TOREG(SR_TX_DSP)); perif.duc->set_link_rate(10e9/8); //whatever perif.duc->set_freq(tx_dsp_core_3000::DEFAULT_CORDIC_FREQ); @@ -784,28 +784,27 @@ void b200_impl::setup_radio(const size_t dspno) // connect rx dsp control objects //////////////////////////////////////////////////////////////////// _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&rx_vita_core_3000::set_tick_rate, perif.framer, _1)) - .subscribe(boost::bind(&rx_dsp_core_3000::set_tick_rate, perif.ddc, _1)); + .add_coerced_subscriber(boost::bind(&rx_vita_core_3000::set_tick_rate, perif.framer, _1)) + .add_coerced_subscriber(boost::bind(&rx_dsp_core_3000::set_tick_rate, perif.ddc, _1)); const fs_path rx_dsp_path = mb_path / "rx_dsps" / dspno; perif.ddc->populate_subtree(_tree->subtree(rx_dsp_path)); _tree->access<double>(rx_dsp_path / "rate" / "value") - .coerce(boost::bind(&b200_impl::coerce_rx_samp_rate, this, perif.ddc, dspno, _1)) - .subscribe(boost::bind(&b200_impl::update_rx_samp_rate, this, dspno, _1)) + .set_coercer(boost::bind(&b200_impl::coerce_rx_samp_rate, this, perif.ddc, dspno, _1)) + .add_coerced_subscriber(boost::bind(&b200_impl::update_rx_samp_rate, this, dspno, _1)) ; _tree->create<stream_cmd_t>(rx_dsp_path / "stream_cmd") - .subscribe(boost::bind(&rx_vita_core_3000::issue_stream_command, perif.framer, _1)); + .add_coerced_subscriber(boost::bind(&rx_vita_core_3000::issue_stream_command, perif.framer, _1)); //////////////////////////////////////////////////////////////////// // create tx dsp control objects //////////////////////////////////////////////////////////////////// _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&tx_vita_core_3000::set_tick_rate, perif.deframer, _1)) - .subscribe(boost::bind(&tx_dsp_core_3000::set_tick_rate, perif.duc, _1)); + .add_coerced_subscriber(boost::bind(&tx_dsp_core_3000::set_tick_rate, perif.duc, _1)); const fs_path tx_dsp_path = mb_path / "tx_dsps" / dspno; perif.duc->populate_subtree(_tree->subtree(tx_dsp_path)); _tree->access<double>(tx_dsp_path / "rate" / "value") - .coerce(boost::bind(&b200_impl::coerce_tx_samp_rate, this, perif.duc, dspno, _1)) - .subscribe(boost::bind(&b200_impl::update_tx_samp_rate, this, dspno, _1)) + .set_coercer(boost::bind(&b200_impl::coerce_tx_samp_rate, this, perif.duc, dspno, _1)) + .add_coerced_subscriber(boost::bind(&b200_impl::update_tx_samp_rate, this, dspno, _1)) ; //////////////////////////////////////////////////////////////////// @@ -825,17 +824,17 @@ void b200_impl::setup_radio(const size_t dspno) // Now connect all the b200_impl-specific items _tree->create<sensor_value_t>(rf_fe_path / "sensors" / "lo_locked") - .publish(boost::bind(&b200_impl::get_fe_pll_locked, this, dir == TX_DIRECTION)) + .set_publisher(boost::bind(&b200_impl::get_fe_pll_locked, this, dir == TX_DIRECTION)) ; _tree->access<double>(rf_fe_path / "freq" / "value") - .subscribe(boost::bind(&b200_impl::update_bandsel, this, key, _1)) + .add_coerced_subscriber(boost::bind(&b200_impl::update_bandsel, this, key, _1)) ; if (dir == RX_DIRECTION) { static const std::vector<std::string> ants = boost::assign::list_of("TX/RX")("RX2"); _tree->create<std::vector<std::string> >(rf_fe_path / "antenna" / "options").set(ants); _tree->create<std::string>(rf_fe_path / "antenna" / "value") - .subscribe(boost::bind(&b200_impl::update_antenna_sel, this, dspno, _1)) + .add_coerced_subscriber(boost::bind(&b200_impl::update_antenna_sel, this, dspno, _1)) .set("RX2") ; @@ -971,27 +970,6 @@ void b200_impl::set_mb_eeprom(const uhd::usrp::mboard_eeprom_t &mb_eeprom) mb_eeprom.commit(*_iface, "B200"); } - -boost::uint32_t b200_impl::get_fp_gpio(gpio_core_200::sptr gpio) -{ - return boost::uint32_t(gpio->read_gpio(dboard_iface::UNIT_RX)); -} - -void b200_impl::set_fp_gpio(gpio_core_200::sptr gpio, const gpio_attr_t attr, const boost::uint32_t value) -{ - switch (attr) - { - case GPIO_CTRL: return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value); - case GPIO_DDR: return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value); - case GPIO_OUT: return gpio->set_gpio_out(dboard_iface::UNIT_RX, value); - case GPIO_ATR_0X: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value); - case GPIO_ATR_RX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value); - case GPIO_ATR_TX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value); - case GPIO_ATR_XX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value); - default: UHD_THROW_INVALID_CODE_PATH(); - } -} - /*********************************************************************** * Reference time and clock **********************************************************************/ @@ -1174,11 +1152,11 @@ void b200_impl::update_atrs(void) if (enb_rx and enb_tx) fd = STATE_FDX1_TXRX; if (enb_rx and not enb_tx) fd = rxonly; if (not enb_rx and enb_tx) fd = txonly; - gpio_core_200_32wo::sptr atr = perif.atr; - atr->set_atr_reg(dboard_iface::ATR_REG_IDLE, STATE_OFF); - atr->set_atr_reg(dboard_iface::ATR_REG_RX_ONLY, rxonly); - atr->set_atr_reg(dboard_iface::ATR_REG_TX_ONLY, txonly); - atr->set_atr_reg(dboard_iface::ATR_REG_FULL_DUPLEX, fd); + gpio_atr_3000::sptr atr = perif.atr; + atr->set_atr_reg(ATR_REG_IDLE, STATE_OFF); + atr->set_atr_reg(ATR_REG_RX_ONLY, rxonly); + atr->set_atr_reg(ATR_REG_TX_ONLY, txonly); + atr->set_atr_reg(ATR_REG_FULL_DUPLEX, fd); } if (_radio_perifs.size() > _fe2 and _radio_perifs[_fe2].atr) { @@ -1192,11 +1170,11 @@ void b200_impl::update_atrs(void) if (enb_rx and enb_tx) fd = STATE_FDX2_TXRX; if (enb_rx and not enb_tx) fd = rxonly; if (not enb_rx and enb_tx) fd = txonly; - gpio_core_200_32wo::sptr atr = perif.atr; - atr->set_atr_reg(dboard_iface::ATR_REG_IDLE, STATE_OFF); - atr->set_atr_reg(dboard_iface::ATR_REG_RX_ONLY, rxonly); - atr->set_atr_reg(dboard_iface::ATR_REG_TX_ONLY, txonly); - atr->set_atr_reg(dboard_iface::ATR_REG_FULL_DUPLEX, fd); + gpio_atr_3000::sptr atr = perif.atr; + atr->set_atr_reg(ATR_REG_IDLE, STATE_OFF); + atr->set_atr_reg(ATR_REG_RX_ONLY, rxonly); + atr->set_atr_reg(ATR_REG_TX_ONLY, txonly); + atr->set_atr_reg(ATR_REG_FULL_DUPLEX, fd); } } diff --git a/host/lib/usrp/b200/b200_impl.hpp b/host/lib/usrp/b200/b200_impl.hpp index 22dd231ce..257d9988f 100644 --- a/host/lib/usrp/b200/b200_impl.hpp +++ b/host/lib/usrp/b200/b200_impl.hpp @@ -27,7 +27,7 @@ #include "rx_vita_core_3000.hpp" #include "tx_vita_core_3000.hpp" #include "time_core_3000.hpp" -#include "gpio_core_200.hpp" +#include "gpio_atr_3000.hpp" #include "radio_ctrl_core_3000.hpp" #include "rx_dsp_core_3000.hpp" #include "tx_dsp_core_3000.hpp" @@ -49,8 +49,8 @@ #include "recv_packet_demuxer_3000.hpp" static const boost::uint8_t B200_FW_COMPAT_NUM_MAJOR = 8; static const boost::uint8_t B200_FW_COMPAT_NUM_MINOR = 0; -static const boost::uint16_t B200_FPGA_COMPAT_NUM = 13; -static const boost::uint16_t B205_FPGA_COMPAT_NUM = 4; +static const boost::uint16_t B200_FPGA_COMPAT_NUM = 14; +static const boost::uint16_t B205_FPGA_COMPAT_NUM = 5; static const double B200_BUS_CLOCK_RATE = 100e6; static const boost::uint32_t B200_GPSDO_ST_NONE = 0x83; static const size_t B200_MAX_RATE_USB2 = 53248000; // bytes/s @@ -180,8 +180,8 @@ private: struct radio_perifs_t { radio_ctrl_core_3000::sptr ctrl; - gpio_core_200_32wo::sptr atr; - gpio_core_200::sptr fp_gpio; + uhd::usrp::gpio_atr::gpio_atr_3000::sptr atr; + uhd::usrp::gpio_atr::gpio_atr_3000::sptr fp_gpio; time_core_3000::sptr time64; rx_vita_core_3000::sptr framer; rx_dsp_core_3000::sptr ddc; @@ -224,14 +224,10 @@ private: enum time_source_t {GPSDO=0,EXTERNAL=1,INTERNAL=2,NONE=3,UNKNOWN=4} _time_source; void update_gpio_state(void); - void reset_codec_dcm(void); void update_enables(void); void update_atrs(void); - boost::uint32_t get_fp_gpio(gpio_core_200::sptr); - void set_fp_gpio(gpio_core_200::sptr, const gpio_attr_t, const boost::uint32_t); - double _tick_rate; double get_tick_rate(void){return _tick_rate;} double set_tick_rate(const double rate); diff --git a/host/lib/usrp/b200/b200_io_impl.cpp b/host/lib/usrp/b200/b200_io_impl.cpp index 93f5b22fc..98347b114 100644 --- a/host/lib/usrp/b200/b200_io_impl.cpp +++ b/host/lib/usrp/b200/b200_io_impl.cpp @@ -159,7 +159,6 @@ void b200_impl::update_tick_rate(const double new_tick_rate) boost::shared_ptr<sph::send_packet_streamer> my_streamer = boost::dynamic_pointer_cast<sph::send_packet_streamer>(perif.tx_streamer.lock()); if (my_streamer) my_streamer->set_tick_rate(new_tick_rate); - perif.deframer->set_tick_rate(new_tick_rate); } } diff --git a/host/lib/usrp/common/CMakeLists.txt b/host/lib/usrp/common/CMakeLists.txt index 9dabc4e0b..55dc92023 100644 --- a/host/lib/usrp/common/CMakeLists.txt +++ b/host/lib/usrp/common/CMakeLists.txt @@ -29,7 +29,7 @@ INCLUDE_DIRECTORIES("${CMAKE_CURRENT_SOURCE_DIR}/ad9361_driver") LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/adf4001_ctrl.cpp - ${CMAKE_CURRENT_SOURCE_DIR}/adf435x_common.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/adf435x.cpp ${CMAKE_CURRENT_SOURCE_DIR}/ad9361_ctrl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/ad936x_manager.cpp ${CMAKE_CURRENT_SOURCE_DIR}/ad9361_driver/ad9361_device.cpp @@ -37,4 +37,5 @@ LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/validate_subdev_spec.cpp ${CMAKE_CURRENT_SOURCE_DIR}/recv_packet_demuxer.cpp ${CMAKE_CURRENT_SOURCE_DIR}/fifo_ctrl_excelsior.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/usrp3_fw_ctrl_iface.cpp ) diff --git a/host/lib/usrp/common/ad9361_ctrl.hpp b/host/lib/usrp/common/ad9361_ctrl.hpp index 5c438ee9c..8cd75d539 100644 --- a/host/lib/usrp/common/ad9361_ctrl.hpp +++ b/host/lib/usrp/common/ad9361_ctrl.hpp @@ -89,8 +89,10 @@ public: //! get the clock rate range for the frontend static uhd::meta_range_t get_clock_rate_range(void) { - //return uhd::meta_range_t(220e3, 61.44e6); - return uhd::meta_range_t(5e6, ad9361_device_t::AD9361_MAX_CLOCK_RATE); //5 MHz DCM low end + return uhd::meta_range_t( + ad9361_device_t::AD9361_MIN_CLOCK_RATE, + ad9361_device_t::AD9361_MAX_CLOCK_RATE + ); } //! set the filter bandwidth for the frontend's analog low pass diff --git a/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp b/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp index 0a8a61575..bb25379c0 100644 --- a/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp +++ b/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp @@ -91,6 +91,7 @@ int get_num_taps(int max_num_taps) { } const double ad9361_device_t::AD9361_MAX_GAIN = 89.75; +const double ad9361_device_t::AD9361_MIN_CLOCK_RATE = 220e3; const double ad9361_device_t::AD9361_MAX_CLOCK_RATE = 61.44e6; const double ad9361_device_t::AD9361_CAL_VALID_WINDOW = 100e6; // Max bandwdith is due to filter rolloff in analog filter stage @@ -770,7 +771,7 @@ void ad9361_device_t::_calibrate_rf_dc_offset() size_t count = 0; _io_iface->poke8(0x016, 0x02); while (_io_iface->peek8(0x016) & 0x02) { - if (count > 100) { + if (count > 200) { throw uhd::runtime_error("[ad9361_device_t] RF DC Offset Calibration Failure"); break; } @@ -821,7 +822,7 @@ void ad9361_device_t::_calibrate_rx_quadrature() size_t count = 0; _io_iface->poke8(0x016, 0x20); while (_io_iface->peek8(0x016) & 0x20) { - if (count > 100) { + if (count > 1000) { throw uhd::runtime_error("[ad9361_device_t] Rx Quadrature Calibration Failure"); break; } diff --git a/host/lib/usrp/common/ad9361_driver/ad9361_device.h b/host/lib/usrp/common/ad9361_driver/ad9361_device.h index 66bc2e8b9..73b1d9a35 100644 --- a/host/lib/usrp/common/ad9361_driver/ad9361_device.h +++ b/host/lib/usrp/common/ad9361_driver/ad9361_device.h @@ -157,6 +157,7 @@ public: //Constants static const double AD9361_MAX_GAIN; static const double AD9361_MAX_CLOCK_RATE; + static const double AD9361_MIN_CLOCK_RATE; static const double AD9361_CAL_VALID_WINDOW; static const double AD9361_RECOMMENDED_MAX_BANDWIDTH; static const double DEFAULT_RX_FREQ; diff --git a/host/lib/usrp/common/ad936x_manager.cpp b/host/lib/usrp/common/ad936x_manager.cpp index de8c4c7ab..58893395e 100644 --- a/host/lib/usrp/common/ad936x_manager.cpp +++ b/host/lib/usrp/common/ad936x_manager.cpp @@ -211,11 +211,11 @@ class ad936x_manager_impl : public ad936x_manager // Sensors subtree->create<sensor_value_t>("sensors/temp") - .publish(boost::bind(&ad9361_ctrl::get_temperature, _codec_ctrl)) + .set_publisher(boost::bind(&ad9361_ctrl::get_temperature, _codec_ctrl)) ; if (dir == RX_DIRECTION) { subtree->create<sensor_value_t>("sensors/rssi") - .publish(boost::bind(&ad9361_ctrl::get_rssi, _codec_ctrl, key)) + .set_publisher(boost::bind(&ad9361_ctrl::get_rssi, _codec_ctrl, key)) ; } @@ -226,7 +226,7 @@ class ad936x_manager_impl : public ad936x_manager .set(ad9361_ctrl::get_gain_range(key)); subtree->create<double>(uhd::fs_path("gains") / name / "value") .set(ad936x_manager::DEFAULT_GAIN) - .coerce(boost::bind(&ad9361_ctrl::set_gain, _codec_ctrl, key, _1)) + .set_coercer(boost::bind(&ad9361_ctrl::set_gain, _codec_ctrl, key, _1)) ; } @@ -238,19 +238,19 @@ class ad936x_manager_impl : public ad936x_manager // Analog Bandwidths subtree->create<double>("bandwidth/value") .set(ad936x_manager::DEFAULT_BANDWIDTH) - .coerce(boost::bind(&ad9361_ctrl::set_bw_filter, _codec_ctrl, key, _1)) + .set_coercer(boost::bind(&ad9361_ctrl::set_bw_filter, _codec_ctrl, key, _1)) ; subtree->create<meta_range_t>("bandwidth/range") - .publish(boost::bind(&ad9361_ctrl::get_bw_filter_range, key)) + .set_publisher(boost::bind(&ad9361_ctrl::get_bw_filter_range, key)) ; // LO Tuning subtree->create<meta_range_t>("freq/range") - .publish(boost::bind(&ad9361_ctrl::get_rf_freq_range)) + .set_publisher(boost::bind(&ad9361_ctrl::get_rf_freq_range)) ; subtree->create<double>("freq/value") - .publish(boost::bind(&ad9361_ctrl::get_freq, _codec_ctrl, key)) - .coerce(boost::bind(&ad9361_ctrl::tune, _codec_ctrl, key, _1)) + .set_publisher(boost::bind(&ad9361_ctrl::get_freq, _codec_ctrl, key)) + .set_coercer(boost::bind(&ad9361_ctrl::tune, _codec_ctrl, key, _1)) ; // Frontend corrections @@ -258,21 +258,21 @@ class ad936x_manager_impl : public ad936x_manager { subtree->create<bool>("dc_offset/enable" ) .set(ad936x_manager::DEFAULT_AUTO_DC_OFFSET) - .subscribe(boost::bind(&ad9361_ctrl::set_dc_offset_auto, _codec_ctrl, key, _1)) + .add_coerced_subscriber(boost::bind(&ad9361_ctrl::set_dc_offset_auto, _codec_ctrl, key, _1)) ; subtree->create<bool>("iq_balance/enable" ) .set(ad936x_manager::DEFAULT_AUTO_IQ_BALANCE) - .subscribe(boost::bind(&ad9361_ctrl::set_iq_balance_auto, _codec_ctrl, key, _1)) + .add_coerced_subscriber(boost::bind(&ad9361_ctrl::set_iq_balance_auto, _codec_ctrl, key, _1)) ; // AGC setup const std::list<std::string> mode_strings = boost::assign::list_of("slow")("fast"); subtree->create<bool>("gain/agc/enable") .set(DEFAULT_AGC_ENABLE) - .subscribe(boost::bind((&ad9361_ctrl::set_agc), _codec_ctrl, key, _1)) + .add_coerced_subscriber(boost::bind((&ad9361_ctrl::set_agc), _codec_ctrl, key, _1)) ; subtree->create<std::string>("gain/agc/mode/value") - .subscribe(boost::bind((&ad9361_ctrl::set_agc_mode), _codec_ctrl, key, _1)).set(mode_strings.front()) + .add_coerced_subscriber(boost::bind((&ad9361_ctrl::set_agc_mode), _codec_ctrl, key, _1)).set(mode_strings.front()) ; subtree->create< std::list<std::string> >("gain/agc/mode/options") .set(mode_strings) @@ -282,8 +282,8 @@ class ad936x_manager_impl : public ad936x_manager // Frontend filters BOOST_FOREACH(const std::string &filter_name, _codec_ctrl->get_filter_names(key)) { subtree->create<filter_info_base::sptr>(uhd::fs_path("filters") / filter_name / "value" ) - .publish(boost::bind(&ad9361_ctrl::get_filter, _codec_ctrl, key, filter_name)) - .subscribe(boost::bind(&ad9361_ctrl::set_filter, _codec_ctrl, key, filter_name, _1)); + .set_publisher(boost::bind(&ad9361_ctrl::get_filter, _codec_ctrl, key, filter_name)) + .add_coerced_subscriber(boost::bind(&ad9361_ctrl::set_filter, _codec_ctrl, key, filter_name, _1)); } } diff --git a/host/lib/usrp/common/adf435x.cpp b/host/lib/usrp/common/adf435x.cpp new file mode 100644 index 000000000..f1ba6ad05 --- /dev/null +++ b/host/lib/usrp/common/adf435x.cpp @@ -0,0 +1,34 @@ +// +// Copyright 2013-2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "adf435x.hpp" + +using namespace uhd; + +adf435x_iface::~adf435x_iface() +{ +} + +adf435x_iface::sptr adf435x_iface::make_adf4350(write_fn_t write) +{ + return sptr(new adf435x_impl<adf4350_regs_t>(write)); +} + +adf435x_iface::sptr adf435x_iface::make_adf4351(write_fn_t write) +{ + return sptr(new adf435x_impl<adf4351_regs_t>(write)); +} diff --git a/host/lib/usrp/common/adf435x.hpp b/host/lib/usrp/common/adf435x.hpp new file mode 100644 index 000000000..16557b514 --- /dev/null +++ b/host/lib/usrp/common/adf435x.hpp @@ -0,0 +1,330 @@ +// +// Copyright 2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_ADF435X_HPP +#define INCLUDED_ADF435X_HPP + +#include <uhd/exception.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/types/ranges.hpp> +#include <uhd/utils/log.hpp> +#include <boost/function.hpp> +#include <boost/thread.hpp> +#include <boost/math/special_functions/round.hpp> +#include <vector> +#include "adf4350_regs.hpp" +#include "adf4351_regs.hpp" + +class adf435x_iface +{ +public: + typedef boost::shared_ptr<adf435x_iface> sptr; + typedef boost::function<void(std::vector<boost::uint32_t>)> write_fn_t; + + static sptr make_adf4350(write_fn_t write); + static sptr make_adf4351(write_fn_t write); + + virtual ~adf435x_iface() = 0; + + enum prescaler_t { PRESCALER_4_5, PRESCALER_8_9 }; + + enum feedback_sel_t { FB_SEL_FUNDAMENTAL, FB_SEL_DIVIDED }; + + enum output_power_t { OUTPUT_POWER_M4DBM, OUTPUT_POWER_M1DBM, OUTPUT_POWER_2DBM, OUTPUT_POWER_5DBM }; + + virtual void set_reference_freq(double fref) = 0; + + virtual void set_prescaler(prescaler_t prescaler) = 0; + + virtual void set_feedback_select(feedback_sel_t fb_sel) = 0; + + virtual void set_output_power(output_power_t power) = 0; + + virtual uhd::range_t get_int_range() = 0; + + virtual double set_frequency(double target_freq, bool int_n_mode, bool flush = false) = 0; + + virtual void commit(void) = 0; +}; + +template <typename adf435x_regs_t> +class adf435x_impl : public adf435x_iface +{ +public: + adf435x_impl(write_fn_t write_fn) : + _write_fn(write_fn), + _regs(), + _fb_after_divider(false), + _reference_freq(0.0), + _N_min(-1) + {} + + virtual ~adf435x_impl() {}; + + void set_reference_freq(double fref) + { + _reference_freq = fref; + } + + void set_feedback_select(feedback_sel_t fb_sel) + { + _fb_after_divider = (fb_sel == FB_SEL_DIVIDED); + } + + void set_prescaler(prescaler_t prescaler) + { + if (prescaler == PRESCALER_8_9) { + _regs.prescaler = adf435x_regs_t::PRESCALER_8_9; + _N_min = 75; + } else { + _regs.prescaler = adf435x_regs_t::PRESCALER_4_5; + _N_min = 23; + } + } + + void set_output_power(output_power_t power) + { + switch (power) { + case OUTPUT_POWER_M4DBM: _regs.output_power = adf435x_regs_t::OUTPUT_POWER_M4DBM; break; + case OUTPUT_POWER_M1DBM: _regs.output_power = adf435x_regs_t::OUTPUT_POWER_M1DBM; break; + case OUTPUT_POWER_2DBM: _regs.output_power = adf435x_regs_t::OUTPUT_POWER_2DBM; break; + case OUTPUT_POWER_5DBM: _regs.output_power = adf435x_regs_t::OUTPUT_POWER_5DBM; break; + default: UHD_THROW_INVALID_CODE_PATH(); + } + } + + uhd::range_t get_int_range() + { + if (_N_min < 0) throw uhd::runtime_error("set_prescaler must be called before get_int_range"); + return uhd::range_t(_N_min, 4095); + } + + double set_frequency(double target_freq, bool int_n_mode, bool flush = false) + { + static const double REF_DOUBLER_THRESH_FREQ = 12.5e6; + static const double PFD_FREQ_MAX = 25.0e6; + static const double BAND_SEL_FREQ_MAX = 100e3; + static const double VCO_FREQ_MIN = 2.2e9; + static const double VCO_FREQ_MAX = 4.4e9; + + //Default invalid value for actual_freq + double actual_freq = 0; + + uhd::range_t rf_divider_range = _get_rfdiv_range(); + uhd::range_t int_range = get_int_range(); + + double pfd_freq = 0; + boost::uint16_t R = 0, BS = 0, N = 0, FRAC = 0, MOD = 0; + boost::uint16_t RFdiv = static_cast<boost::uint16_t>(rf_divider_range.start()); + bool D = false, T = false; + + //Reference doubler for 50% duty cycle + D = (_reference_freq <= REF_DOUBLER_THRESH_FREQ); + + //increase RF divider until acceptable VCO frequency + double vco_freq = target_freq; + while (vco_freq < VCO_FREQ_MIN && RFdiv < static_cast<boost::uint16_t>(rf_divider_range.stop())) { + vco_freq *= 2; + RFdiv *= 2; + } + + /* + * The goal here is to loop though possible R dividers, + * band select clock dividers, N (int) dividers, and FRAC + * (frac) dividers. + * + * Calculate the N and F dividers for each set of values. + * The loop exits when it meets all of the constraints. + * The resulting loop values are loaded into the registers. + * + * from pg.21 + * + * f_pfd = f_ref*(1+D)/(R*(1+T)) + * f_vco = (N + (FRAC/MOD))*f_pfd + * N = f_vco/f_pfd - FRAC/MOD = f_vco*((R*(T+1))/(f_ref*(1+D))) - FRAC/MOD + * f_actual = f_vco/RFdiv) + */ + double feedback_freq = _fb_after_divider ? target_freq : vco_freq; + + for(R = 1; R <= 1023; R+=1){ + //PFD input frequency = f_ref/R ... ignoring Reference doubler/divide-by-2 (D & T) + pfd_freq = _reference_freq*(D?2:1)/(R*(T?2:1)); + + //keep the PFD frequency at or below 25MHz (Loop Filter Bandwidth) + if (pfd_freq > PFD_FREQ_MAX) continue; + + //First, ignore fractional part of tuning + N = boost::uint16_t(std::floor(feedback_freq/pfd_freq)); + + //keep N > minimum int divider requirement + if (N < static_cast<boost::uint16_t>(int_range.start())) continue; + + for(BS=1; BS <= 255; BS+=1){ + //keep the band select frequency at or below band_sel_freq_max + //constraint on band select clock + if (pfd_freq/BS > BAND_SEL_FREQ_MAX) continue; + goto done_loop; + } + } done_loop: + + //Fractional-N calculation + MOD = 4095; //max fractional accuracy + FRAC = static_cast<boost::uint16_t>(boost::math::round((feedback_freq/pfd_freq - N)*MOD)); + if (int_n_mode) { + if (FRAC > (MOD / 2)) { //Round integer such that actual freq is closest to target + N++; + } + FRAC = 0; + } + + //Reference divide-by-2 for 50% duty cycle + // if R even, move one divide by 2 to to regs.reference_divide_by_2 + if(R % 2 == 0) { + T = true; + R /= 2; + } + + //Typical phase resync time documented in data sheet pg.24 + static const double PHASE_RESYNC_TIME = 400e-6; + + //If feedback after divider, then compensation for the divider is pulled into the INT value + int rf_div_compensation = _fb_after_divider ? 1 : RFdiv; + + //Compute the actual frequency in terms of _reference_freq, N, FRAC, MOD, D, R and T. + actual_freq = ( + double((N + (double(FRAC)/double(MOD))) * + (_reference_freq*(D?2:1)/(R*(T?2:1)))) + ) / rf_div_compensation; + + _regs.frac_12_bit = FRAC; + _regs.int_16_bit = N; + _regs.mod_12_bit = MOD; + _regs.clock_divider_12_bit = std::max<boost::uint16_t>(1, boost::uint16_t(std::ceil(PHASE_RESYNC_TIME*pfd_freq/MOD))); + _regs.feedback_select = _fb_after_divider ? + adf435x_regs_t::FEEDBACK_SELECT_DIVIDED : + adf435x_regs_t::FEEDBACK_SELECT_FUNDAMENTAL; + _regs.clock_div_mode = _fb_after_divider ? + adf435x_regs_t::CLOCK_DIV_MODE_RESYNC_ENABLE : + adf435x_regs_t::CLOCK_DIV_MODE_FAST_LOCK; + _regs.r_counter_10_bit = R; + _regs.reference_divide_by_2 = T ? + adf435x_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED : + adf435x_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED; + _regs.reference_doubler = D ? + adf435x_regs_t::REFERENCE_DOUBLER_ENABLED : + adf435x_regs_t::REFERENCE_DOUBLER_DISABLED; + _regs.band_select_clock_div = boost::uint8_t(BS); + _regs.rf_divider_select = static_cast<typename adf435x_regs_t::rf_divider_select_t>(_get_rfdiv_setting(RFdiv)); + _regs.ldf = int_n_mode ? + adf435x_regs_t::LDF_INT_N : + adf435x_regs_t::LDF_FRAC_N; + + std::string tuning_str = (int_n_mode) ? "Integer-N" : "Fractional"; + UHD_LOGV(often) + << boost::format("ADF 435X Frequencies (MHz): REQUESTED=%0.9f, ACTUAL=%0.9f" + ) % (target_freq/1e6) % (actual_freq/1e6) << std::endl + << boost::format("ADF 435X Intermediates (MHz): Feedback=%0.2f, VCO=%0.2f, PFD=%0.2f, BAND=%0.2f, REF=%0.2f" + ) % (feedback_freq/1e6) % (vco_freq/1e6) % (pfd_freq/1e6) % (pfd_freq/BS/1e6) % (_reference_freq/1e6) << std::endl + << boost::format("ADF 435X Tuning: %s") % tuning_str.c_str() << std::endl + << boost::format("ADF 435X Settings: R=%d, BS=%d, N=%d, FRAC=%d, MOD=%d, T=%d, D=%d, RFdiv=%d" + ) % R % BS % N % FRAC % MOD % T % D % RFdiv << std::endl; + + UHD_ASSERT_THROW((_regs.frac_12_bit & ((boost::uint16_t)~0xFFF)) == 0); + UHD_ASSERT_THROW((_regs.mod_12_bit & ((boost::uint16_t)~0xFFF)) == 0); + UHD_ASSERT_THROW((_regs.clock_divider_12_bit & ((boost::uint16_t)~0xFFF)) == 0); + UHD_ASSERT_THROW((_regs.r_counter_10_bit & ((boost::uint16_t)~0x3FF)) == 0); + + UHD_ASSERT_THROW(vco_freq >= VCO_FREQ_MIN and vco_freq <= VCO_FREQ_MAX); + UHD_ASSERT_THROW(RFdiv >= static_cast<boost::uint16_t>(rf_divider_range.start())); + UHD_ASSERT_THROW(RFdiv <= static_cast<boost::uint16_t>(rf_divider_range.stop())); + UHD_ASSERT_THROW(_regs.int_16_bit >= static_cast<boost::uint16_t>(int_range.start())); + UHD_ASSERT_THROW(_regs.int_16_bit <= static_cast<boost::uint16_t>(int_range.stop())); + + if (flush) commit(); + return actual_freq; + } + + void commit() + { + //reset counters + _regs.counter_reset = adf435x_regs_t::COUNTER_RESET_ENABLED; + std::vector<boost::uint32_t> regs; + regs.push_back(_regs.get_reg(boost::uint32_t(2))); + _write_fn(regs); + _regs.counter_reset = adf435x_regs_t::COUNTER_RESET_DISABLED; + + //write the registers + //correct power-up sequence to write registers (5, 4, 3, 2, 1, 0) + regs.clear(); + for (int addr = 5; addr >= 0; addr--) { + regs.push_back(_regs.get_reg(boost::uint32_t(addr))); + } + _write_fn(regs); + } + +protected: + uhd::range_t _get_rfdiv_range(); + int _get_rfdiv_setting(boost::uint16_t div); + + write_fn_t _write_fn; + adf435x_regs_t _regs; + double _fb_after_divider; + double _reference_freq; + int _N_min; +}; + +template <> +inline uhd::range_t adf435x_impl<adf4350_regs_t>::_get_rfdiv_range() +{ + return uhd::range_t(1, 16); +} + +template <> +inline uhd::range_t adf435x_impl<adf4351_regs_t>::_get_rfdiv_range() +{ + return uhd::range_t(1, 64); +} + +template <> +inline int adf435x_impl<adf4350_regs_t>::_get_rfdiv_setting(boost::uint16_t div) +{ + switch (div) { + case 1: return int(adf4350_regs_t::RF_DIVIDER_SELECT_DIV1); + case 2: return int(adf4350_regs_t::RF_DIVIDER_SELECT_DIV2); + case 4: return int(adf4350_regs_t::RF_DIVIDER_SELECT_DIV4); + case 8: return int(adf4350_regs_t::RF_DIVIDER_SELECT_DIV8); + case 16: return int(adf4350_regs_t::RF_DIVIDER_SELECT_DIV16); + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +template <> +inline int adf435x_impl<adf4351_regs_t>::_get_rfdiv_setting(boost::uint16_t div) +{ + switch (div) { + case 1: return int(adf4351_regs_t::RF_DIVIDER_SELECT_DIV1); + case 2: return int(adf4351_regs_t::RF_DIVIDER_SELECT_DIV2); + case 4: return int(adf4351_regs_t::RF_DIVIDER_SELECT_DIV4); + case 8: return int(adf4351_regs_t::RF_DIVIDER_SELECT_DIV8); + case 16: return int(adf4351_regs_t::RF_DIVIDER_SELECT_DIV16); + case 32: return int(adf4351_regs_t::RF_DIVIDER_SELECT_DIV32); + case 64: return int(adf4351_regs_t::RF_DIVIDER_SELECT_DIV64); + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +#endif // INCLUDED_ADF435X_HPP diff --git a/host/lib/usrp/common/adf435x_common.cpp b/host/lib/usrp/common/adf435x_common.cpp deleted file mode 100644 index 474a1c932..000000000 --- a/host/lib/usrp/common/adf435x_common.cpp +++ /dev/null @@ -1,161 +0,0 @@ -// -// Copyright 2013-2014 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#include "adf435x_common.hpp" - -#include <boost/math/special_functions/round.hpp> -#include <uhd/types/tune_request.hpp> -#include <uhd/utils/log.hpp> -#include <cmath> - - -using namespace uhd; - -/*********************************************************************** - * ADF 4350/4351 Tuning Utility - **********************************************************************/ -adf435x_tuning_settings tune_adf435x_synth( - const double target_freq, - const double ref_freq, - const adf435x_tuning_constraints& constraints, - double& actual_freq) -{ - //Default invalid value for actual_freq - actual_freq = 0; - - double pfd_freq = 0; - boost::uint16_t R = 0, BS = 0, N = 0, FRAC = 0, MOD = 0; - boost::uint16_t RFdiv = static_cast<boost::uint16_t>(constraints.rf_divider_range.start()); - bool D = false, T = false; - - //Reference doubler for 50% duty cycle - //If ref_freq < 12.5MHz enable the reference doubler - D = (ref_freq <= constraints.ref_doubler_threshold); - - static const double MIN_VCO_FREQ = 2.2e9; - static const double MAX_VCO_FREQ = 4.4e9; - - //increase RF divider until acceptable VCO frequency - double vco_freq = target_freq; - while (vco_freq < MIN_VCO_FREQ && RFdiv < static_cast<boost::uint16_t>(constraints.rf_divider_range.stop())) { - vco_freq *= 2; - RFdiv *= 2; - } - - /* - * The goal here is to loop though possible R dividers, - * band select clock dividers, N (int) dividers, and FRAC - * (frac) dividers. - * - * Calculate the N and F dividers for each set of values. - * The loop exits when it meets all of the constraints. - * The resulting loop values are loaded into the registers. - * - * from pg.21 - * - * f_pfd = f_ref*(1+D)/(R*(1+T)) - * f_vco = (N + (FRAC/MOD))*f_pfd - * N = f_vco/f_pfd - FRAC/MOD = f_vco*((R*(T+1))/(f_ref*(1+D))) - FRAC/MOD - * f_actual = f_vco/RFdiv) - */ - double feedback_freq = constraints.feedback_after_divider ? target_freq : vco_freq; - - for(R = 1; R <= 1023; R+=1){ - //PFD input frequency = f_ref/R ... ignoring Reference doubler/divide-by-2 (D & T) - pfd_freq = ref_freq*(D?2:1)/(R*(T?2:1)); - - //keep the PFD frequency at or below 25MHz (Loop Filter Bandwidth) - if (pfd_freq > constraints.pfd_freq_max) continue; - - //First, ignore fractional part of tuning - N = boost::uint16_t(std::floor(feedback_freq/pfd_freq)); - - //keep N > minimum int divider requirement - if (N < static_cast<boost::uint16_t>(constraints.int_range.start())) continue; - - for(BS=1; BS <= 255; BS+=1){ - //keep the band select frequency at or below band_sel_freq_max - //constraint on band select clock - if (pfd_freq/BS > constraints.band_sel_freq_max) continue; - goto done_loop; - } - } done_loop: - - //Fractional-N calculation - MOD = 4095; //max fractional accuracy - FRAC = static_cast<boost::uint16_t>(boost::math::round((feedback_freq/pfd_freq - N)*MOD)); - if (constraints.force_frac0) { - if (FRAC > (MOD / 2)) { //Round integer such that actual freq is closest to target - N++; - } - FRAC = 0; - } - - //Reference divide-by-2 for 50% duty cycle - // if R even, move one divide by 2 to to regs.reference_divide_by_2 - if(R % 2 == 0) { - T = true; - R /= 2; - } - - //Typical phase resync time documented in data sheet pg.24 - static const double PHASE_RESYNC_TIME = 400e-6; - - //If feedback after divider, then compensation for the divider is pulled into the INT value - int rf_div_compensation = constraints.feedback_after_divider ? 1 : RFdiv; - - //Compute the actual frequency in terms of ref_freq, N, FRAC, MOD, D, R and T. - actual_freq = ( - double((N + (double(FRAC)/double(MOD))) * - (ref_freq*(D?2:1)/(R*(T?2:1)))) - ) / rf_div_compensation; - - //load the settings - adf435x_tuning_settings settings; - settings.frac_12_bit = FRAC; - settings.int_16_bit = N; - settings.mod_12_bit = MOD; - settings.clock_divider_12_bit = std::max<boost::uint16_t>(1, boost::uint16_t(std::ceil(PHASE_RESYNC_TIME*pfd_freq/MOD))); - settings.r_counter_10_bit = R; - settings.r_divide_by_2_en = T; - settings.r_doubler_en = D; - settings.band_select_clock_div = boost::uint8_t(BS); - settings.rf_divider = RFdiv; - - std::string tuning_str = (constraints.force_frac0) ? "Integer-N" : "Fractional"; - UHD_LOGV(often) - << boost::format("ADF 435X Frequencies (MHz): REQUESTED=%0.9f, ACTUAL=%0.9f" - ) % (target_freq/1e6) % (actual_freq/1e6) << std::endl - << boost::format("ADF 435X Intermediates (MHz): Feedback=%0.2f, VCO=%0.2f, PFD=%0.2f, BAND=%0.2f, REF=%0.2f" - ) % (feedback_freq/1e6) % (vco_freq/1e6) % (pfd_freq/1e6) % (pfd_freq/BS/1e6) % (ref_freq/1e6) << std::endl - << boost::format("ADF 435X Tuning: %s") % tuning_str.c_str() << std::endl - << boost::format("ADF 435X Settings: R=%d, BS=%d, N=%d, FRAC=%d, MOD=%d, T=%d, D=%d, RFdiv=%d" - ) % R % BS % N % FRAC % MOD % T % D % RFdiv << std::endl; - - UHD_ASSERT_THROW((settings.frac_12_bit & ((boost::uint16_t)~0xFFF)) == 0); - UHD_ASSERT_THROW((settings.mod_12_bit & ((boost::uint16_t)~0xFFF)) == 0); - UHD_ASSERT_THROW((settings.clock_divider_12_bit & ((boost::uint16_t)~0xFFF)) == 0); - UHD_ASSERT_THROW((settings.r_counter_10_bit & ((boost::uint16_t)~0x3FF)) == 0); - - UHD_ASSERT_THROW(vco_freq >= MIN_VCO_FREQ and vco_freq <= MAX_VCO_FREQ); - UHD_ASSERT_THROW(settings.rf_divider >= static_cast<boost::uint16_t>(constraints.rf_divider_range.start())); - UHD_ASSERT_THROW(settings.rf_divider <= static_cast<boost::uint16_t>(constraints.rf_divider_range.stop())); - UHD_ASSERT_THROW(settings.int_16_bit >= static_cast<boost::uint16_t>(constraints.int_range.start())); - UHD_ASSERT_THROW(settings.int_16_bit <= static_cast<boost::uint16_t>(constraints.int_range.stop())); - - return settings; -} diff --git a/host/lib/usrp/common/adf435x_common.hpp b/host/lib/usrp/common/adf435x_common.hpp deleted file mode 100644 index 617b9d97f..000000000 --- a/host/lib/usrp/common/adf435x_common.hpp +++ /dev/null @@ -1,63 +0,0 @@ -// -// Copyright 2014 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#ifndef INCLUDED_ADF435X_COMMON_HPP -#define INCLUDED_ADF435X_COMMON_HPP - -#include <boost/cstdint.hpp> -#include <uhd/property_tree.hpp> -#include <uhd/types/ranges.hpp> - -//Common IO Pins -#define ADF435X_CE (1 << 3) -#define ADF435X_PDBRF (1 << 2) -#define ADF435X_MUXOUT (1 << 1) // INPUT!!! -#define LOCKDET_MASK (1 << 0) // INPUT!!! - -#define RX_ATTN_SHIFT 8 //lsb of RX Attenuator Control -#define RX_ATTN_MASK (63 << RX_ATTN_SHIFT) //valid bits of RX Attenuator Control - -struct adf435x_tuning_constraints { - bool force_frac0; - bool feedback_after_divider; - double ref_doubler_threshold; - double pfd_freq_max; - double band_sel_freq_max; - uhd::range_t rf_divider_range; - uhd::range_t int_range; -}; - -struct adf435x_tuning_settings { - boost::uint16_t frac_12_bit; - boost::uint16_t int_16_bit; - boost::uint16_t mod_12_bit; - boost::uint16_t r_counter_10_bit; - bool r_doubler_en; - bool r_divide_by_2_en; - boost::uint16_t clock_divider_12_bit; - boost::uint8_t band_select_clock_div; - boost::uint16_t rf_divider; -}; - -adf435x_tuning_settings tune_adf435x_synth( - const double target_freq, - const double ref_freq, - const adf435x_tuning_constraints& constraints, - double& actual_freq -); - -#endif /* INCLUDED_ADF435X_COMMON_HPP */ diff --git a/host/lib/usrp/common/constrained_device_args.hpp b/host/lib/usrp/common/constrained_device_args.hpp new file mode 100644 index 000000000..1bfd1df00 --- /dev/null +++ b/host/lib/usrp/common/constrained_device_args.hpp @@ -0,0 +1,283 @@ +// +// Copyright 2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_LIBUHD_USRP_COMMON_CONSTRAINED_DEV_ARGS_HPP +#define INCLUDED_LIBUHD_USRP_COMMON_CONSTRAINED_DEV_ARGS_HPP + +#include <uhd/types/device_addr.hpp> +#include <uhd/exception.hpp> +#include <boost/lexical_cast.hpp> +#include <boost/format.hpp> +#include <boost/algorithm/string.hpp> +#include <boost/assign/list_of.hpp> +#include <vector> +#include <string> + +namespace uhd { +namespace usrp { + + /*! + * constrained_device_args_t provides a base and utilities to + * map key=value pairs passed in through the device creation + * args interface (device_addr_t). + * + * Inherit from this class to create typed device specific + * arguments and use the base class methods to handle parsing + * the device_addr or any key=value string to populate the args + * + * This file contains a library of different types of args the + * the user can pass in. The library can be extended to support + * non-intrinsic types by the client. + * + */ + class constrained_device_args_t { + public: //Types + + /*! + * Base argument type. All other arguments inherit from this. + */ + class generic_arg { + public: + generic_arg(const std::string& key): _key(key) {} + inline const std::string& key() const { return _key; } + inline virtual std::string to_string() const = 0; + private: + std::string _key; + }; + + /*! + * String argument type. Can be case sensitive or insensitive + */ + template<bool case_sensitive> + class str_arg : public generic_arg { + public: + str_arg(const std::string& name, const std::string& default_value) : + generic_arg(name) { set(default_value); } + + inline void set(const std::string& value) { + _value = case_sensitive ? value : boost::algorithm::to_lower_copy(value); + } + inline const std::string& get() const { + return _value; + } + inline void parse(const std::string& str_rep) { + set(str_rep); + } + inline virtual std::string to_string() const { + return key() + "=" + get(); + } + inline bool operator==(const std::string& rhs) const { + return get() == boost::algorithm::to_lower_copy(rhs); + } + private: + std::string _value; + }; + typedef str_arg<false> str_ci_arg; + typedef str_arg<true> str_cs_arg; + + /*! + * Numeric argument type. The template type data_t allows the + * client to constrain the type of the number. + */ + template<typename data_t> + class num_arg : public generic_arg { + public: + num_arg(const std::string& name, const data_t default_value) : + generic_arg(name) { set(default_value); } + + inline void set(const data_t value) { + _value = value; + } + inline const data_t get() const { + return _value; + } + inline void parse(const std::string& str_rep) { + try { + _value = boost::lexical_cast<data_t>(str_rep); + } catch (std::exception& ex) { + throw uhd::value_error(str(boost::format( + "Error parsing numeric parameter %s: %s.") % + key() % ex.what() + )); + } + } + inline virtual std::string to_string() const { + return key() + "=" + boost::lexical_cast<std::string>(get()); + } + private: + data_t _value; + }; + + /*! + * Enumeration argument type. The template type enum_t allows the + * client to use their own enum and specify a string mapping for + * the values of the enum + * + * NOTE: The constraint on enum_t is that the values must start with + * 0 and be sequential + */ + template<typename enum_t> + class enum_arg : public generic_arg { + public: + enum_arg( + const std::string& name, + const enum_t default_value, + const std::vector<std::string>& values) : + generic_arg(name), _str_values(values) + { set(default_value); } + + inline void set(const enum_t value) { + _value = value; + } + inline const enum_t get() const { + return _value; + } + inline void parse(const std::string& str_rep, bool assert_invalid = true) { + std::string valid_values_str; + for (size_t i = 0; i < _str_values.size(); i++) { + if (boost::algorithm::to_lower_copy(str_rep) == + boost::algorithm::to_lower_copy(_str_values[i])) + { + valid_values_str += ((i==0)?"":", ") + _str_values[i]; + set(static_cast<enum_t>(static_cast<int>(i))); + return; + } + } + //If we reach here then, the string enum value was invalid + if (assert_invalid) { + throw uhd::value_error(str(boost::format( + "Invalid device arg value: %s=%s (Valid: {%s})") % + key() % str_rep % valid_values_str + )); + } + } + inline virtual std::string to_string() const { + size_t index = static_cast<size_t>(static_cast<int>(_value)); + UHD_ASSERT_THROW(index < _str_values.size()); + return key() + "=" + _str_values[index]; + } + + private: + enum_t _value; + std::vector<std::string> _str_values; + }; + + /*! + * Boolean argument type. + */ + class bool_arg : public generic_arg { + public: + bool_arg(const std::string& name, const bool default_value) : + generic_arg(name) { set(default_value); } + + inline void set(const bool value) { + _value = value; + } + inline bool get() const { + return _value; + } + inline void parse(const std::string& str_rep) { + try { + _value = (boost::lexical_cast<int>(str_rep) != 0); + } catch (std::exception& ex) { + if (str_rep.empty()) { + //If str_rep is empty then the device_addr was set + //without a value which means that the user "set" the flag + _value = true; + } else if (boost::algorithm::to_lower_copy(str_rep) == "true" || + boost::algorithm::to_lower_copy(str_rep) == "yes" || + boost::algorithm::to_lower_copy(str_rep) == "y") { + _value = true; + } else if (boost::algorithm::to_lower_copy(str_rep) == "false" || + boost::algorithm::to_lower_copy(str_rep) == "no" || + boost::algorithm::to_lower_copy(str_rep) == "n") { + _value = false; + } else { + throw uhd::value_error(str(boost::format( + "Error parsing boolean parameter %s: %s.") % + key() % ex.what() + )); + } + } + } + inline virtual std::string to_string() const { + return key() + "=" + (get() ? "true" : "false"); + } + private: + bool _value; + }; + + public: //Methods + constrained_device_args_t() {} + virtual ~constrained_device_args_t() {} + + void parse(const std::string& str_args) { + device_addr_t dev_args(str_args); + _parse(dev_args); + } + + void parse(const device_addr_t& dev_args) { + _parse(dev_args); + } + + inline virtual std::string to_string() const = 0; + + protected: //Methods + //Override _parse to provide an implementation to parse all + //client specific device args + virtual void _parse(const device_addr_t& dev_args) = 0; + + /*! + * Utility: Ensure that the value of the device arg is between min and max + */ + template<typename num_data_t> + static inline void _enforce_range(const num_arg<num_data_t>& arg, const num_data_t& min, const num_data_t& max) { + if (arg.get() > max || arg.get() < min) { + throw uhd::value_error(str(boost::format( + "Invalid device arg value: %s (Minimum: %s, Maximum: %s)") % + arg.to_string() % + boost::lexical_cast<std::string>(min) % boost::lexical_cast<std::string>(max))); + } + } + + /*! + * Utility: Ensure that the value of the device arg is is contained in valid_values + */ + template<typename arg_t, typename data_t> + static inline void _enforce_discrete(const arg_t& arg, const std::vector<data_t>& valid_values) { + bool match = false; + BOOST_FOREACH(const data_t& val, valid_values) { + if (val == arg.get()) { + match = true; + break; + } + } + if (!match) { + std::string valid_values_str; + for (size_t i = 0; i < valid_values.size(); i++) { + valid_values_str += ((i==0)?"":", ") + boost::lexical_cast<std::string>(valid_values[i]); + throw uhd::value_error(str(boost::format( + "Invalid device arg value: %s (Valid: {%s})") % + arg.to_string() % valid_values_str + )); + } + } + } + }; +}} //namespaces + +#endif /* INCLUDED_LIBUHD_USRP_COMMON_CONSTRAINED_DEV_ARGS_HPP */ diff --git a/host/lib/usrp/common/fw_comm_protocol.h b/host/lib/usrp/common/fw_comm_protocol.h new file mode 100644 index 000000000..14adb33a9 --- /dev/null +++ b/host/lib/usrp/common/fw_comm_protocol.h @@ -0,0 +1,102 @@ +// +// Copyright 2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_FW_COMM_PROTOCOL +#define INCLUDED_FW_COMM_PROTOCOL + +#include <stdint.h> +#ifndef __cplusplus +#include <stdbool.h> +#endif + +/*! + * Structs and constants for communication between firmware and host. + * This header is shared by the firmware and host code. + * Therefore, this header may only contain valid C code. + */ +#ifdef __cplusplus +extern "C" { +#endif + +#define FW_COMM_PROTOCOL_SIGNATURE 0xACE3 +#define FW_COMM_PROTOCOL_VERSION 0 +#define FW_COMM_MAX_DATA_WORDS 16 +#define FW_COMM_PROTOCOL_MTU 256 + +#define FW_COMM_FLAGS_ACK 0x00000001 +#define FW_COMM_FLAGS_CMD_MASK 0x00000FF0 +#define FW_COMM_FLAGS_ERROR_MASK 0xFF000000 + +#define FW_COMM_CMD_ECHO 0x00000000 +#define FW_COMM_CMD_POKE32 0x00000010 +#define FW_COMM_CMD_PEEK32 0x00000020 +#define FW_COMM_CMD_BLOCK_POKE32 0x00000030 +#define FW_COMM_CMD_BLOCK_PEEK32 0x00000040 + +#define FW_COMM_ERR_PKT_ERROR 0x80000000 +#define FW_COMM_ERR_CMD_ERROR 0x40000000 +#define FW_COMM_ERR_SIZE_ERROR 0x20000000 + +#define FW_COMM_GENERATE_ID(prod) ((((uint32_t) FW_COMM_PROTOCOL_SIGNATURE) << 0) | \ + (((uint32_t) prod) << 16) | \ + (((uint32_t) FW_COMM_PROTOCOL_VERSION) << 24)) + +#define FW_COMM_GET_PROTOCOL_SIG(id) ((uint16_t)(id & 0xFFFF)) +#define FW_COMM_GET_PRODUCT_ID(id) ((uint8_t)(id >> 16)) +#define FW_COMM_GET_PROTOCOL_VER(id) ((uint8_t)(id >> 24)) + +typedef struct +{ + uint32_t id; //Protocol and device identifier + uint32_t flags; //Holds commands and ack messages + uint32_t sequence; //Sequence number (specific to FW communication transactions) + uint32_t data_words; //Number of data words in payload + uint32_t addr; //Address field for the command in flags + uint32_t data[FW_COMM_MAX_DATA_WORDS]; //Data field for the command in flags +} fw_comm_pkt_t; + +#ifdef __cplusplus +} //extern "C" +#endif + +// The following definitions are only useful in firmware. Exclude in host code. +#ifndef __cplusplus + +typedef void (*poke32_func)(const uint32_t addr, const uint32_t data); +typedef uint32_t (*peek32_func)(const uint32_t addr); + +/*! + * Process a firmware communication packet and compute a response. + * Args: + * - (in) request: Pointer to the request struct + * - (out) response: Pointer to the response struct + * - (in) product_id: The 8-bit usrp3 specific product ID (for request filtering) + * - (func) poke_callback, peek_callback: Callback functions for a single peek/poke + * - return value: Send a response packet + */ +bool process_fw_comm_protocol_pkt( + const fw_comm_pkt_t* request, + fw_comm_pkt_t* response, + uint8_t product_id, + uint32_t iface_id, + poke32_func poke_callback, + peek32_func peek_callback +); + +#endif //ifdef __cplusplus + +#endif /* INCLUDED_FW_COMM_PROTOCOL */ diff --git a/host/lib/usrp/common/usrp3_fw_ctrl_iface.cpp b/host/lib/usrp/common/usrp3_fw_ctrl_iface.cpp new file mode 100644 index 000000000..ef541e37f --- /dev/null +++ b/host/lib/usrp/common/usrp3_fw_ctrl_iface.cpp @@ -0,0 +1,246 @@ +// +// Copyright 2013 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp3_fw_ctrl_iface.hpp" + +#include <uhd/utils/byteswap.hpp> +#include <uhd/utils/msg.hpp> +#include <uhd/exception.hpp> +#include <boost/format.hpp> +#include <boost/asio.hpp> //used for htonl and ntohl +#include <boost/foreach.hpp> +#include "fw_comm_protocol.h" + +namespace uhd { namespace usrp { namespace usrp3 { + +//---------------------------------------------------------- +// Factory method +//---------------------------------------------------------- +uhd::wb_iface::sptr usrp3_fw_ctrl_iface::make( + uhd::transport::udp_simple::sptr udp_xport, + const boost::uint16_t product_id, + const bool verbose) +{ + return wb_iface::sptr(new usrp3_fw_ctrl_iface(udp_xport, product_id, verbose)); +} + +//---------------------------------------------------------- +// udp_fw_ctrl_iface +//---------------------------------------------------------- + +usrp3_fw_ctrl_iface::usrp3_fw_ctrl_iface( + uhd::transport::udp_simple::sptr udp_xport, + const boost::uint16_t product_id, + const bool verbose) : + _product_id(product_id), _verbose(verbose), _udp_xport(udp_xport), + _seq_num(0) +{ + flush(); + peek32(0); +} + +usrp3_fw_ctrl_iface::~usrp3_fw_ctrl_iface() +{ + flush(); +} + +void usrp3_fw_ctrl_iface::flush() +{ + boost::mutex::scoped_lock lock(_mutex); + _flush(); +} + +void usrp3_fw_ctrl_iface::poke32(const wb_addr_type addr, const boost::uint32_t data) +{ + boost::mutex::scoped_lock lock(_mutex); + + for (size_t i = 1; i <= NUM_RETRIES; i++) { + try { + _poke32(addr, data); + return; + } catch(const std::exception &ex) { + const std::string error_msg = str(boost::format( + "udp fw poke32 failure #%u\n%s") % i % ex.what()); + if (_verbose) UHD_MSG(warning) << error_msg << std::endl; + if (i == NUM_RETRIES) throw uhd::io_error(error_msg); + } + } +} + +boost::uint32_t usrp3_fw_ctrl_iface::peek32(const wb_addr_type addr) +{ + boost::mutex::scoped_lock lock(_mutex); + + for (size_t i = 1; i <= NUM_RETRIES; i++) { + try { + return _peek32(addr); + } catch(const std::exception &ex) { + const std::string error_msg = str(boost::format( + "udp fw peek32 failure #%u\n%s") % i % ex.what()); + if (_verbose) UHD_MSG(warning) << error_msg << std::endl; + if (i == NUM_RETRIES) throw uhd::io_error(error_msg); + } + } + return 0; +} + +void usrp3_fw_ctrl_iface::_poke32(const wb_addr_type addr, const boost::uint32_t data) +{ + //Load request struct + fw_comm_pkt_t request; + request.id = uhd::htonx<boost::uint32_t>(FW_COMM_GENERATE_ID(_product_id)); + request.flags = uhd::htonx<boost::uint32_t>(FW_COMM_FLAGS_ACK | FW_COMM_CMD_POKE32); + request.sequence = uhd::htonx<boost::uint32_t>(_seq_num++); + request.addr = uhd::htonx(addr); + request.data_words = 1; + request.data[0] = uhd::htonx(data); + + //Send request + _flush(); + _udp_xport->send(boost::asio::buffer(&request, sizeof(request))); + + //Recv reply + fw_comm_pkt_t reply; + const size_t nbytes = _udp_xport->recv(boost::asio::buffer(&reply, sizeof(reply)), 1.0); + if (nbytes == 0) throw uhd::io_error("udp fw poke32 - reply timed out"); + + //Sanity checks + const size_t flags = uhd::ntohx<boost::uint32_t>(reply.flags); + UHD_ASSERT_THROW(nbytes == sizeof(reply)); + UHD_ASSERT_THROW(not (flags & FW_COMM_FLAGS_ERROR_MASK)); + UHD_ASSERT_THROW(flags & FW_COMM_CMD_POKE32); + UHD_ASSERT_THROW(flags & FW_COMM_FLAGS_ACK); + UHD_ASSERT_THROW(reply.sequence == request.sequence); + UHD_ASSERT_THROW(reply.addr == request.addr); + UHD_ASSERT_THROW(reply.data[0] == request.data[0]); +} + +boost::uint32_t usrp3_fw_ctrl_iface::_peek32(const wb_addr_type addr) +{ + //Load request struct + fw_comm_pkt_t request; + request.id = uhd::htonx<boost::uint32_t>(FW_COMM_GENERATE_ID(_product_id)); + request.flags = uhd::htonx<boost::uint32_t>(FW_COMM_FLAGS_ACK | FW_COMM_CMD_PEEK32); + request.sequence = uhd::htonx<boost::uint32_t>(_seq_num++); + request.addr = uhd::htonx(addr); + request.data_words = 1; + request.data[0] = 0; + + //Send request + _flush(); + _udp_xport->send(boost::asio::buffer(&request, sizeof(request))); + + //Recv reply + fw_comm_pkt_t reply; + const size_t nbytes = _udp_xport->recv(boost::asio::buffer(&reply, sizeof(reply)), 1.0); + if (nbytes == 0) throw uhd::io_error("udp fw peek32 - reply timed out"); + + //Sanity checks + const size_t flags = uhd::ntohx<boost::uint32_t>(reply.flags); + UHD_ASSERT_THROW(nbytes == sizeof(reply)); + UHD_ASSERT_THROW(not (flags & FW_COMM_FLAGS_ERROR_MASK)); + UHD_ASSERT_THROW(flags & FW_COMM_CMD_PEEK32); + UHD_ASSERT_THROW(flags & FW_COMM_FLAGS_ACK); + UHD_ASSERT_THROW(reply.sequence == request.sequence); + UHD_ASSERT_THROW(reply.addr == request.addr); + + //return result! + return uhd::ntohx<boost::uint32_t>(reply.data[0]); +} + +void usrp3_fw_ctrl_iface::_flush(void) +{ + char buff[FW_COMM_PROTOCOL_MTU] = {}; + while (_udp_xport->recv(boost::asio::buffer(buff), 0.0)) { + /*NOP*/ + } +} + +std::vector<std::string> usrp3_fw_ctrl_iface::discover_devices( + const std::string& addr_hint, const std::string& port, + boost::uint16_t product_id) +{ + std::vector<std::string> addrs; + + //Create a UDP transport to communicate: + //Some devices will cause a throw when opened for a broadcast address. + //We print and recover so the caller can loop through all bcast addrs. + uhd::transport::udp_simple::sptr udp_bcast_xport; + try { + udp_bcast_xport = uhd::transport::udp_simple::make_broadcast(addr_hint, port); + } catch(const std::exception &e) { + UHD_MSG(error) << boost::format("Cannot open UDP transport on %s for discovery\n%s") + % addr_hint % e.what() << std::endl; + return addrs; + } + + //Send dummy request + fw_comm_pkt_t request; + request.id = uhd::htonx<boost::uint32_t>(FW_COMM_GENERATE_ID(product_id)); + request.flags = uhd::htonx<boost::uint32_t>(FW_COMM_FLAGS_ACK|FW_COMM_CMD_ECHO); + request.sequence = uhd::htonx<boost::uint32_t>(std::rand()); + udp_bcast_xport->send(boost::asio::buffer(&request, sizeof(request))); + + //loop for replies until timeout + while (true) { + char buff[FW_COMM_PROTOCOL_MTU] = {}; + const size_t nbytes = udp_bcast_xport->recv(boost::asio::buffer(buff), 0.050); + if (nbytes != sizeof(fw_comm_pkt_t)) break; //No more responses or responses are invalid + + const fw_comm_pkt_t *reply = (const fw_comm_pkt_t *)buff; + if (request.id == reply->id && + request.flags == reply->flags && + request.sequence == reply->sequence) + { + addrs.push_back(udp_bcast_xport->get_recv_addr()); + } + } + + return addrs; +} + +boost::uint32_t usrp3_fw_ctrl_iface::get_iface_id( + const std::string& addr, const std::string& port, + boost::uint16_t product_id) +{ + uhd::transport::udp_simple::sptr udp_xport = + uhd::transport::udp_simple::make_connected(addr, port); + + //Send dummy request + fw_comm_pkt_t request; + request.id = uhd::htonx<boost::uint32_t>(FW_COMM_GENERATE_ID(product_id)); + request.flags = uhd::htonx<boost::uint32_t>(FW_COMM_FLAGS_ACK|FW_COMM_CMD_ECHO); + request.sequence = uhd::htonx<boost::uint32_t>(std::rand()); + udp_xport->send(boost::asio::buffer(&request, sizeof(request))); + + //loop for replies until timeout + char buff[FW_COMM_PROTOCOL_MTU] = {}; + const size_t nbytes = udp_xport->recv(boost::asio::buffer(buff), 1.0); + + const fw_comm_pkt_t *reply = (const fw_comm_pkt_t *)buff; + if (nbytes > 0 && + request.id == reply->id && + request.flags == reply->flags && + request.sequence == reply->sequence) + { + return uhd::ntohx<boost::uint32_t>(reply->data[0]); + } else { + throw uhd::io_error("udp get_iface_id - bad response"); + } +} + +}}} //namespace diff --git a/host/lib/usrp/common/usrp3_fw_ctrl_iface.hpp b/host/lib/usrp/common/usrp3_fw_ctrl_iface.hpp new file mode 100644 index 000000000..33286861b --- /dev/null +++ b/host/lib/usrp/common/usrp3_fw_ctrl_iface.hpp @@ -0,0 +1,72 @@ +// +// Copyright 2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_LIBUHD_USRP_USRP3_UDP_FW_CTRL_IFACE_HPP +#define INCLUDED_LIBUHD_USRP_USRP3_UDP_FW_CTRL_IFACE_HPP + +#include <uhd/types/wb_iface.hpp> +#include <uhd/transport/udp_simple.hpp> +#include <boost/thread/mutex.hpp> +#include <vector> + +namespace uhd { namespace usrp { namespace usrp3 { + +class usrp3_fw_ctrl_iface : public uhd::wb_iface +{ +public: + usrp3_fw_ctrl_iface( + uhd::transport::udp_simple::sptr udp_xport, + const boost::uint16_t product_id, + const bool verbose); + virtual ~usrp3_fw_ctrl_iface(); + + // -- uhd::wb_iface -- + void poke32(const wb_addr_type addr, const boost::uint32_t data); + boost::uint32_t peek32(const wb_addr_type addr); + void flush(); + + static uhd::wb_iface::sptr make( + uhd::transport::udp_simple::sptr udp_xport, + const boost::uint16_t product_id, + const bool verbose = true); + // -- uhd::wb_iface -- + + static std::vector<std::string> discover_devices( + const std::string& addr_hint, const std::string& port, + boost::uint16_t product_id); + + static boost::uint32_t get_iface_id( + const std::string& addr, const std::string& port, + boost::uint16_t product_id); + +private: + void _poke32(const wb_addr_type addr, const boost::uint32_t data); + boost::uint32_t _peek32(const wb_addr_type addr); + void _flush(void); + + const boost::uint16_t _product_id; + const bool _verbose; + uhd::transport::udp_simple::sptr _udp_xport; + boost::uint32_t _seq_num; + boost::mutex _mutex; + + static const size_t NUM_RETRIES = 3; +}; + +}}} //namespace + +#endif //INCLUDED_LIBUHD_USRP_USRP3_USRP3_UDP_FW_CTRL_HPP diff --git a/host/lib/usrp/cores/CMakeLists.txt b/host/lib/usrp/cores/CMakeLists.txt index f28ae040f..404fc6137 100644 --- a/host/lib/usrp/cores/CMakeLists.txt +++ b/host/lib/usrp/cores/CMakeLists.txt @@ -37,7 +37,11 @@ LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/time_core_3000.cpp ${CMAKE_CURRENT_SOURCE_DIR}/spi_core_3000.cpp ${CMAKE_CURRENT_SOURCE_DIR}/i2c_core_100_wb32.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dsp_core_utils.cpp ${CMAKE_CURRENT_SOURCE_DIR}/rx_dsp_core_3000.cpp ${CMAKE_CURRENT_SOURCE_DIR}/tx_dsp_core_3000.cpp ${CMAKE_CURRENT_SOURCE_DIR}/radio_ctrl_core_3000.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/gpio_atr_3000.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dma_fifo_core_3000.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/user_settings_core_3000.cpp ) diff --git a/host/lib/usrp/cores/dma_fifo_core_3000.cpp b/host/lib/usrp/cores/dma_fifo_core_3000.cpp new file mode 100644 index 000000000..1a9d5dd5c --- /dev/null +++ b/host/lib/usrp/cores/dma_fifo_core_3000.cpp @@ -0,0 +1,397 @@ +// +// Copyright 2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "dma_fifo_core_3000.hpp" +#include <uhd/exception.hpp> +#include <boost/thread/thread.hpp> //sleep +#include <uhd/utils/soft_register.hpp> +#include <uhd/utils/msg.hpp> + +using namespace uhd; + +#define SR_DRAM_BIST_BASE 16 + +dma_fifo_core_3000::~dma_fifo_core_3000(void) { + /* NOP */ +} + +class dma_fifo_core_3000_impl : public dma_fifo_core_3000 +{ +protected: + class rb_addr_reg_t : public soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(ADDR, /*width*/ 3, /*shift*/ 0); //[2:0] + + static const boost::uint32_t RB_FIFO_STATUS = 0; + static const boost::uint32_t RB_BIST_STATUS = 1; + static const boost::uint32_t RB_BIST_XFER_CNT = 2; + static const boost::uint32_t RB_BIST_CYC_CNT = 3; + + rb_addr_reg_t(boost::uint32_t base): + soft_reg32_wo_t(base + 0) + { + //Initial values + set(ADDR, RB_FIFO_STATUS); + } + }; + + class fifo_ctrl_reg_t : public soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(CLEAR_FIFO, /*width*/ 1, /*shift*/ 0); //[0] + UHD_DEFINE_SOFT_REG_FIELD(RD_SUPPRESS_EN, /*width*/ 1, /*shift*/ 1); //[1] + UHD_DEFINE_SOFT_REG_FIELD(BURST_TIMEOUT, /*width*/ 12, /*shift*/ 4); //[15:4] + UHD_DEFINE_SOFT_REG_FIELD(RD_SUPPRESS_THRESH, /*width*/ 16, /*shift*/ 16); //[31:16] + + fifo_ctrl_reg_t(boost::uint32_t base): + soft_reg32_wo_t(base + 4) + { + //Initial values + set(CLEAR_FIFO, 1); + set(RD_SUPPRESS_EN, 0); + set(BURST_TIMEOUT, 256); + set(RD_SUPPRESS_THRESH, 0); + } + }; + + class base_addr_reg_t : public soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(BASE_ADDR, /*width*/ 30, /*shift*/ 0); //[29:0] + + base_addr_reg_t(boost::uint32_t base): + soft_reg32_wo_t(base + 8) + { + //Initial values + set(BASE_ADDR, 0x00000000); + } + }; + + class addr_mask_reg_t : public soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(ADDR_MASK, /*width*/ 30, /*shift*/ 0); //[29:0] + + addr_mask_reg_t(boost::uint32_t base): + soft_reg32_wo_t(base + 12) + { + //Initial values + set(ADDR_MASK, 0xFF000000); + } + }; + + class bist_ctrl_reg_t : public soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(GO, /*width*/ 1, /*shift*/ 0); //[0] + UHD_DEFINE_SOFT_REG_FIELD(CONTINUOUS_MODE, /*width*/ 1, /*shift*/ 1); //[1] + UHD_DEFINE_SOFT_REG_FIELD(TEST_PATT, /*width*/ 2, /*shift*/ 4); //[5:4] + + static const boost::uint32_t TEST_PATT_ZERO_ONE = 0; + static const boost::uint32_t TEST_PATT_CHECKERBOARD = 1; + static const boost::uint32_t TEST_PATT_COUNT = 2; + static const boost::uint32_t TEST_PATT_COUNT_INV = 3; + + bist_ctrl_reg_t(boost::uint32_t base): + soft_reg32_wo_t(base + 16) + { + //Initial values + set(GO, 0); + set(CONTINUOUS_MODE, 0); + set(TEST_PATT, TEST_PATT_ZERO_ONE); + } + }; + + class bist_cfg_reg_t : public soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(MAX_PKTS, /*width*/ 18, /*shift*/ 0); //[17:0] + UHD_DEFINE_SOFT_REG_FIELD(MAX_PKT_SIZE, /*width*/ 13, /*shift*/ 18); //[30:18] + UHD_DEFINE_SOFT_REG_FIELD(PKT_SIZE_RAMP, /*width*/ 1, /*shift*/ 31); //[31] + + bist_cfg_reg_t(boost::uint32_t base): + soft_reg32_wo_t(base + 20) + { + //Initial values + set(MAX_PKTS, 0); + set(MAX_PKT_SIZE, 0); + set(PKT_SIZE_RAMP, 0); + } + }; + + class bist_delay_reg_t : public soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(TX_PKT_DELAY, /*width*/ 16, /*shift*/ 0); //[15:0] + UHD_DEFINE_SOFT_REG_FIELD(RX_SAMP_DELAY, /*width*/ 8, /*shift*/ 16); //[23:16] + + bist_delay_reg_t(boost::uint32_t base): + soft_reg32_wo_t(base + 24) + { + //Initial values + set(TX_PKT_DELAY, 0); + set(RX_SAMP_DELAY, 0); + } + }; + + class bist_sid_reg_t : public soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(SID, /*width*/ 32, /*shift*/ 0); //[31:0] + + bist_sid_reg_t(boost::uint32_t base): + soft_reg32_wo_t(base + 28) + { + //Initial values + set(SID, 0); + } + }; + +public: + class fifo_readback { + public: + fifo_readback(wb_iface::sptr iface, const size_t base, const size_t rb_addr) : + _iface(iface), _addr_reg(base), _rb_addr(rb_addr) + { + _addr_reg.initialize(*iface, true); + } + + bool is_fifo_instantiated() { + boost::lock_guard<boost::mutex> lock(_mutex); + _addr_reg.write(rb_addr_reg_t::ADDR, rb_addr_reg_t::RB_FIFO_STATUS); + return _iface->peek32(_rb_addr) & 0x80000000; + } + + boost::uint32_t get_occupied_cnt() { + boost::lock_guard<boost::mutex> lock(_mutex); + _addr_reg.write(rb_addr_reg_t::ADDR, rb_addr_reg_t::RB_FIFO_STATUS); + return _iface->peek32(_rb_addr) & 0x7FFFFFF; + } + + boost::uint32_t is_fifo_busy() { + boost::lock_guard<boost::mutex> lock(_mutex); + _addr_reg.write(rb_addr_reg_t::ADDR, rb_addr_reg_t::RB_FIFO_STATUS); + return _iface->peek32(_rb_addr) & 0x40000000; + } + + struct bist_status_t { + bool running; + bool finished; + boost::uint8_t error; + }; + + bist_status_t get_bist_status() { + boost::lock_guard<boost::mutex> lock(_mutex); + _addr_reg.write(rb_addr_reg_t::ADDR, rb_addr_reg_t::RB_BIST_STATUS); + boost::uint32_t st32 = _iface->peek32(_rb_addr) & 0xF; + bist_status_t status; + status.running = st32 & 0x1; + status.finished = st32 & 0x2; + status.error = static_cast<boost::uint8_t>((st32>>2) & 0x3); + return status; + } + + bool is_ext_bist_supported() { + boost::lock_guard<boost::mutex> lock(_mutex); + _addr_reg.write(rb_addr_reg_t::ADDR, rb_addr_reg_t::RB_BIST_STATUS); + return _iface->peek32(_rb_addr) & 0x80000000; + } + + double get_xfer_ratio() { + boost::lock_guard<boost::mutex> lock(_mutex); + boost::uint32_t xfer_cnt = 0, cyc_cnt = 0; + _addr_reg.write(rb_addr_reg_t::ADDR, rb_addr_reg_t::RB_BIST_XFER_CNT); + xfer_cnt = _iface->peek32(_rb_addr); + _addr_reg.write(rb_addr_reg_t::ADDR, rb_addr_reg_t::RB_BIST_CYC_CNT); + cyc_cnt = _iface->peek32(_rb_addr); + return (static_cast<double>(xfer_cnt)/cyc_cnt); + } + + private: + wb_iface::sptr _iface; + rb_addr_reg_t _addr_reg; + const size_t _rb_addr; + boost::mutex _mutex; + }; + +public: + dma_fifo_core_3000_impl(wb_iface::sptr iface, const size_t base, const size_t readback): + _iface(iface), _base(base), _fifo_readback(iface, base, readback), + _fifo_ctrl_reg(base), _base_addr_reg(base), _addr_mask_reg(base), + _bist_ctrl_reg(base), _bist_cfg_reg(base), _bist_delay_reg(base), _bist_sid_reg(base) + { + _fifo_ctrl_reg.initialize(*iface, true); + _base_addr_reg.initialize(*iface, true); + _addr_mask_reg.initialize(*iface, true); + _bist_ctrl_reg.initialize(*iface, true); + _bist_cfg_reg.initialize(*iface, true); + _has_ext_bist = _fifo_readback.is_ext_bist_supported(); + if (_has_ext_bist) { + _bist_delay_reg.initialize(*iface, true); + _bist_sid_reg.initialize(*iface, true); + } + flush(); + } + + virtual void flush() { + //Clear the FIFO and hold it in that state + _fifo_ctrl_reg.write(fifo_ctrl_reg_t::CLEAR_FIFO, 1); + //Re-arm the FIFO + _wait_for_fifo_empty(); + _fifo_ctrl_reg.write(fifo_ctrl_reg_t::CLEAR_FIFO, 0); + } + + virtual void resize(const boost::uint32_t base_addr, const boost::uint32_t size) { + //Validate parameters + if (size < 8192) throw uhd::runtime_error("DMA FIFO must be larger than 8KiB"); + boost::uint32_t size_mask = size - 1; + if (size & size_mask) throw uhd::runtime_error("DMA FIFO size must be a power of 2"); + + //Clear the FIFO and hold it in that state + _fifo_ctrl_reg.write(fifo_ctrl_reg_t::CLEAR_FIFO, 1); + //Write base address and mask + _base_addr_reg.write(base_addr_reg_t::BASE_ADDR, base_addr); + _addr_mask_reg.write(addr_mask_reg_t::ADDR_MASK, ~size_mask); + + //Re-arm the FIFO + flush(); + } + + virtual boost::uint32_t get_bytes_occupied() { + return _fifo_readback.get_occupied_cnt() * 8; + } + + virtual bool ext_bist_supported() { + return _fifo_readback.is_ext_bist_supported(); + } + + virtual boost::uint8_t run_bist(bool finite = true, boost::uint32_t timeout_ms = 500) { + return run_ext_bist(finite, 0, 0, 0, timeout_ms); + } + + virtual boost::uint8_t run_ext_bist( + bool finite, + boost::uint32_t rx_samp_delay, + boost::uint32_t tx_pkt_delay, + boost::uint32_t sid, + boost::uint32_t timeout_ms = 500 + ) { + boost::lock_guard<boost::mutex> lock(_mutex); + + _wait_for_bist_done(timeout_ms, true); //Stop previous BIST and wait (if running) + _bist_ctrl_reg.write(bist_ctrl_reg_t::GO, 0); //Reset + + _bist_cfg_reg.set(bist_cfg_reg_t::MAX_PKTS, (2^18)-1); + _bist_cfg_reg.set(bist_cfg_reg_t::MAX_PKT_SIZE, 8000); + _bist_cfg_reg.set(bist_cfg_reg_t::PKT_SIZE_RAMP, 0); + _bist_cfg_reg.flush(); + + if (_has_ext_bist) { + _bist_delay_reg.set(bist_delay_reg_t::RX_SAMP_DELAY, rx_samp_delay); + _bist_delay_reg.set(bist_delay_reg_t::TX_PKT_DELAY, tx_pkt_delay); + _bist_delay_reg.flush(); + + _bist_sid_reg.write(bist_sid_reg_t::SID, sid); + } else { + if (rx_samp_delay != 0 || tx_pkt_delay != 0 || sid != 0) { + throw uhd::not_implemented_error( + "dma_fifo_core_3000: Runtime delay and SID support only available on FPGA images with extended BIST enabled"); + } + } + + _bist_ctrl_reg.set(bist_ctrl_reg_t::TEST_PATT, bist_ctrl_reg_t::TEST_PATT_COUNT); + _bist_ctrl_reg.set(bist_ctrl_reg_t::CONTINUOUS_MODE, finite ? 0 : 1); + _bist_ctrl_reg.write(bist_ctrl_reg_t::GO, 1); + + if (!finite) { + boost::this_thread::sleep(boost::posix_time::milliseconds(timeout_ms)); + } + + _wait_for_bist_done(timeout_ms, !finite); + if (!_fifo_readback.get_bist_status().finished) { + throw uhd::runtime_error("dma_fifo_core_3000: DRAM BIST state machine is in a bad state."); + } + + return _fifo_readback.get_bist_status().error; + } + + virtual double get_bist_throughput(double fifo_clock_rate) { + if (_has_ext_bist) { + _wait_for_bist_done(1000); + static const double BYTES_PER_CYC = 8; + return _fifo_readback.get_xfer_ratio() * fifo_clock_rate * BYTES_PER_CYC; + } else { + throw uhd::not_implemented_error( + "dma_fifo_core_3000: Throughput counter only available on FPGA images with extended BIST enabled"); + } + } + +private: + void _wait_for_fifo_empty() + { + boost::posix_time::ptime start_time = boost::posix_time::microsec_clock::local_time(); + boost::posix_time::time_duration elapsed; + + while (_fifo_readback.is_fifo_busy()) { + boost::this_thread::sleep(boost::posix_time::microsec(1000)); + elapsed = boost::posix_time::microsec_clock::local_time() - start_time; + if (elapsed.total_milliseconds() > 100) break; + } + } + + void _wait_for_bist_done(boost::uint32_t timeout_ms, bool force_stop = false) + { + boost::posix_time::ptime start_time = boost::posix_time::microsec_clock::local_time(); + boost::posix_time::time_duration elapsed; + + while (_fifo_readback.get_bist_status().running) { + if (force_stop) { + _bist_ctrl_reg.write(bist_ctrl_reg_t::GO, 0); + force_stop = false; + } + boost::this_thread::sleep(boost::posix_time::microsec(1000)); + elapsed = boost::posix_time::microsec_clock::local_time() - start_time; + if (elapsed.total_milliseconds() > timeout_ms) break; + } + } + +private: + wb_iface::sptr _iface; + const size_t _base; + boost::mutex _mutex; + bool _has_ext_bist; + + fifo_readback _fifo_readback; + fifo_ctrl_reg_t _fifo_ctrl_reg; + base_addr_reg_t _base_addr_reg; + addr_mask_reg_t _addr_mask_reg; + bist_ctrl_reg_t _bist_ctrl_reg; + bist_cfg_reg_t _bist_cfg_reg; + bist_delay_reg_t _bist_delay_reg; + bist_sid_reg_t _bist_sid_reg; +}; + +// +// Static make function +// +dma_fifo_core_3000::sptr dma_fifo_core_3000::make(wb_iface::sptr iface, const size_t set_base, const size_t rb_addr) +{ + if (check(iface, set_base, rb_addr)) { + return sptr(new dma_fifo_core_3000_impl(iface, set_base, rb_addr)); + } else { + throw uhd::runtime_error(""); + } +} + +bool dma_fifo_core_3000::check(wb_iface::sptr iface, const size_t set_base, const size_t rb_addr) +{ + dma_fifo_core_3000_impl::fifo_readback fifo_rb(iface, set_base, rb_addr); + return fifo_rb.is_fifo_instantiated(); +} diff --git a/host/lib/usrp/cores/dma_fifo_core_3000.hpp b/host/lib/usrp/cores/dma_fifo_core_3000.hpp new file mode 100644 index 000000000..41430e5c3 --- /dev/null +++ b/host/lib/usrp/cores/dma_fifo_core_3000.hpp @@ -0,0 +1,86 @@ +// +// Copyright 2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_LIBUHD_USRP_DMA_FIFO_CORE_3000_HPP +#define INCLUDED_LIBUHD_USRP_DMA_FIFO_CORE_3000_HPP + +#include <uhd/config.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/noncopyable.hpp> +#include <uhd/types/wb_iface.hpp> + + +class dma_fifo_core_3000 : boost::noncopyable +{ +public: + typedef boost::shared_ptr<dma_fifo_core_3000> sptr; + virtual ~dma_fifo_core_3000(void) = 0; + + /*! + * Create a DMA FIFO controller using the given bus, settings and readback base + * Throws uhd::runtime_error if a DMA FIFO is not instantiated in the FPGA + */ + static sptr make(uhd::wb_iface::sptr iface, const size_t set_base, const size_t rb_addr); + + /*! + * Check if a DMA FIFO is instantiated in the FPGA + */ + static bool check(uhd::wb_iface::sptr iface, const size_t set_base, const size_t rb_addr); + + /*! + * Flush the DMA FIFO. Will clear all contents. + */ + virtual void flush() = 0; + + /*! + * Resize and rebase the DMA FIFO. Will clear all contents. + */ + virtual void resize(const boost::uint32_t base_addr, const boost::uint32_t size) = 0; + + /*! + * Get the (approx) number of bytes currently in the DMA FIFO + */ + virtual boost::uint32_t get_bytes_occupied() = 0; + + /*! + * Run the built-in-self-test routine for the DMA FIFO + */ + virtual boost::uint8_t run_bist(bool finite = true, boost::uint32_t timeout_ms = 500) = 0; + + /*! + * Is extended BIST supported + */ + virtual bool ext_bist_supported() = 0; + + /*! + * Run the built-in-self-test routine for the DMA FIFO (extended BIST only) + */ + virtual boost::uint8_t run_ext_bist( + bool finite, + boost::uint32_t rx_samp_delay, + boost::uint32_t tx_pkt_delay, + boost::uint32_t sid, + boost::uint32_t timeout_ms = 500) = 0; + + /*! + * Get the throughput measured from the last invocation of the BIST (extended BIST only) + */ + virtual double get_bist_throughput(double fifo_clock_rate) = 0; + +}; + +#endif /* INCLUDED_LIBUHD_USRP_DMA_FIFO_CORE_3000_HPP */ diff --git a/host/lib/usrp/cores/dsp_core_utils.cpp b/host/lib/usrp/cores/dsp_core_utils.cpp new file mode 100644 index 000000000..aea809ae8 --- /dev/null +++ b/host/lib/usrp/cores/dsp_core_utils.cpp @@ -0,0 +1,66 @@ +// +// Copyright 2016 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "dsp_core_utils.hpp" +#include <uhd/utils/math.hpp> +#include <uhd/exception.hpp> +#include <boost/math/special_functions/round.hpp> +#include <boost/math/special_functions/sign.hpp> + +static const int32_t MAX_FREQ_WORD = boost::numeric::bounds<boost::int32_t>::highest(); +static const int32_t MIN_FREQ_WORD = boost::numeric::bounds<boost::int32_t>::lowest(); + +void get_freq_and_freq_word( + const double requested_freq, + const double tick_rate, + double &actual_freq, + int32_t &freq_word +) { + //correct for outside of rate (wrap around) + double freq = std::fmod(requested_freq, tick_rate); + if (std::abs(freq) > tick_rate/2.0) + freq -= boost::math::sign(freq) * tick_rate; + + //confirm that the target frequency is within range of the CORDIC + UHD_ASSERT_THROW(std::abs(freq) <= tick_rate/2.0); + + /* Now calculate the frequency word. It is possible for this calculation + * to cause an overflow. As the requested DSP frequency approaches the + * master clock rate, that ratio multiplied by the scaling factor (2^32) + * will generally overflow within the last few kHz of tunable range. + * Thus, we check to see if the operation will overflow before doing it, + * and if it will, we set it to the integer min or max of this system. + */ + freq_word = 0; + + static const double scale_factor = std::pow(2.0, 32); + if ((freq / tick_rate) >= (MAX_FREQ_WORD / scale_factor)) { + /* Operation would have caused a positive overflow of int32. */ + freq_word = MAX_FREQ_WORD; + + } else if ((freq / tick_rate) <= (MIN_FREQ_WORD / scale_factor)) { + /* Operation would have caused a negative overflow of int32. */ + freq_word = MIN_FREQ_WORD; + + } else { + /* The operation is safe. Perform normally. */ + freq_word = int32_t(boost::math::round((freq / tick_rate) * scale_factor)); + } + + actual_freq = (double(freq_word) / scale_factor) * tick_rate; +} + diff --git a/host/lib/usrp/cores/dsp_core_utils.hpp b/host/lib/usrp/cores/dsp_core_utils.hpp new file mode 100644 index 000000000..d5d43f236 --- /dev/null +++ b/host/lib/usrp/cores/dsp_core_utils.hpp @@ -0,0 +1,33 @@ +// +// Copyright 2016 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_LIBUHD_DSP_CORE_UTILS_HPP +#define INCLUDED_LIBUHD_DSP_CORE_UTILS_HPP + +#include <stdint.h> + +/*! For a requested frequency and sampling rate, return the + * correct frequency word (to set the CORDIC) and the actual frequency. + */ +void get_freq_and_freq_word( + const double requested_freq, + const double tick_rate, + double &actual_freq, + int32_t &freq_word +); + +#endif /* INCLUDED_LIBUHD_DSP_CORE_UTILS_HPP */ diff --git a/host/lib/usrp/cores/gpio_atr_3000.cpp b/host/lib/usrp/cores/gpio_atr_3000.cpp new file mode 100644 index 000000000..5844af601 --- /dev/null +++ b/host/lib/usrp/cores/gpio_atr_3000.cpp @@ -0,0 +1,341 @@ +// +// Copyright 2011,2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "gpio_atr_3000.hpp" +#include <uhd/types/dict.hpp> +#include <uhd/utils/soft_register.hpp> + +using namespace uhd; +using namespace usrp; + +//------------------------------------------------------------- +// gpio_atr_3000 +//------------------------------------------------------------- + +#define REG_ATR_IDLE_OFFSET (base + 0) +#define REG_ATR_RX_OFFSET (base + 4) +#define REG_ATR_TX_OFFSET (base + 8) +#define REG_ATR_FDX_OFFSET (base + 12) +#define REG_DDR_OFFSET (base + 16) +#define REG_ATR_DISABLE_OFFSET (base + 20) + +namespace uhd { namespace usrp { namespace gpio_atr { + +class gpio_atr_3000_impl : public gpio_atr_3000{ +public: + gpio_atr_3000_impl( + wb_iface::sptr iface, + const wb_iface::wb_addr_type base, + const wb_iface::wb_addr_type rb_addr = READBACK_DISABLED + ): + _iface(iface), _rb_addr(rb_addr), + _atr_idle_reg(REG_ATR_IDLE_OFFSET, _atr_disable_reg), + _atr_rx_reg(REG_ATR_RX_OFFSET), + _atr_tx_reg(REG_ATR_TX_OFFSET), + _atr_fdx_reg(REG_ATR_FDX_OFFSET), + _ddr_reg(REG_DDR_OFFSET), + _atr_disable_reg(REG_ATR_DISABLE_OFFSET) + { + _atr_idle_reg.initialize(*_iface, true); + _atr_rx_reg.initialize(*_iface, true); + _atr_tx_reg.initialize(*_iface, true); + _atr_fdx_reg.initialize(*_iface, true); + _ddr_reg.initialize(*_iface, true); + _atr_disable_reg.initialize(*_iface, true); + } + + virtual void set_atr_mode(const gpio_atr_mode_t mode, const boost::uint32_t mask) + { + //Each bit in the "ATR Disable" register determines whether the respective bit in the GPIO + //output bus is driven by the ATR engine or a static register. + //For each bit position, a 1 means that the bit is static and 0 means that the bit + //is driven by the ATR state machine. + //This setting will only get applied to all bits in the "mask" that are 1. All other + //bits will retain their old value. + _atr_disable_reg.set_with_mask((mode==MODE_ATR) ? ~MASK_SET_ALL : MASK_SET_ALL, mask); + _atr_disable_reg.flush(); + } + + virtual void set_gpio_ddr(const gpio_ddr_t dir, const boost::uint32_t mask) + { + //Each bit in the "DDR" register determines whether the respective bit in the GPIO + //bus is an input or an output. + //For each bit position, a 1 means that the bit is an output and 0 means that the bit + //is an input. + //This setting will only get applied to all bits in the "mask" that are 1. All other + //bits will retain their old value. + _ddr_reg.set_with_mask((dir==DDR_INPUT) ? ~MASK_SET_ALL : MASK_SET_ALL, mask); + _ddr_reg.flush(); + } + + virtual void set_atr_reg(const gpio_atr_reg_t atr, const boost::uint32_t value, const boost::uint32_t mask = MASK_SET_ALL) + { + //Set the value of the specified ATR register. For bits with ATR Disable set to 1, + //the IDLE register will hold the output state + //This setting will only get applied to all bits in the "mask" that are 1. All other + //bits will retain their old value. + masked_reg_t* reg = NULL; + switch (atr) { + case ATR_REG_IDLE: reg = &_atr_idle_reg; break; + case ATR_REG_RX_ONLY: reg = &_atr_rx_reg; break; + case ATR_REG_TX_ONLY: reg = &_atr_tx_reg; break; + case ATR_REG_FULL_DUPLEX: reg = &_atr_fdx_reg; break; + default: reg = &_atr_idle_reg; break; + } + //For protection we only write to bits that have the mode ATR by masking the user + //specified "mask" with ~atr_disable. + reg->set_with_mask(value, mask); + reg->flush(); + } + + virtual void set_gpio_out(const boost::uint32_t value, const boost::uint32_t mask = MASK_SET_ALL) { + //Set the value of the specified GPIO output register. + //This setting will only get applied to all bits in the "mask" that are 1. All other + //bits will retain their old value. + + //For protection we only write to bits that have the mode GPIO by masking the user + //specified "mask" with atr_disable. + _atr_idle_reg.set_gpio_out_with_mask(value, mask); + _atr_idle_reg.flush(); + } + + virtual boost::uint32_t read_gpio() + { + //Read the state of the GPIO pins + //If a pin is configured as an input, reads the actual value of the pin + //If a pin is configured as an output, reads the last value written to the pin + if (_rb_addr != READBACK_DISABLED) { + return _iface->peek32(_rb_addr); + } else { + throw uhd::runtime_error("read_gpio not supported for write-only interface."); + } + } + + inline virtual void set_gpio_attr(const gpio_attr_t attr, const boost::uint32_t value) + { + //An attribute based API to configure all settings for the GPIO bus in one function + //call. This API does not have a mask so it configures all bits at the same time. + switch (attr) + { + case GPIO_CTRL: + set_atr_mode(MODE_ATR, value); //Configure mode=ATR for all bits that are set + set_atr_mode(MODE_GPIO, ~value); //Configure mode=GPIO for all bits that are unset + break; + case GPIO_DDR: + set_gpio_ddr(DDR_OUTPUT, value); //Configure as output for all bits that are set + set_gpio_ddr(DDR_INPUT, ~value); //Configure as input for all bits that are unset + break; + case GPIO_OUT: + //Only set bits that are driven statically + set_gpio_out(value); + break; + case GPIO_ATR_0X: + //Only set bits that are driven by the ATR engine + set_atr_reg(ATR_REG_IDLE, value); + break; + case GPIO_ATR_RX: + //Only set bits that are driven by the ATR engine + set_atr_reg(ATR_REG_RX_ONLY, value); + break; + case GPIO_ATR_TX: + //Only set bits that are driven by the ATR engine + set_atr_reg(ATR_REG_TX_ONLY, value); + break; + case GPIO_ATR_XX: + //Only set bits that are driven by the ATR engine + set_atr_reg(ATR_REG_FULL_DUPLEX, value); + break; + default: + UHD_THROW_INVALID_CODE_PATH(); + } + } + +protected: + //Special RB addr value to indicate no readback + //This value is invalid as a real address because it is not a multiple of 4 + static const wb_iface::wb_addr_type READBACK_DISABLED = 0xFFFFFFFF; + + class masked_reg_t : public uhd::soft_reg32_wo_t { + public: + masked_reg_t(const wb_iface::wb_addr_type offset): uhd::soft_reg32_wo_t(offset) { + uhd::soft_reg32_wo_t::set(REGISTER, 0); + } + + virtual void set_with_mask(const boost::uint32_t value, const boost::uint32_t mask) { + uhd::soft_reg32_wo_t::set(REGISTER, + (value&mask)|(uhd::soft_reg32_wo_t::get(REGISTER)&(~mask))); + } + + virtual boost::uint32_t get() { + return uhd::soft_reg32_wo_t::get(uhd::soft_reg32_wo_t::REGISTER); + } + + virtual void flush() { + uhd::soft_reg32_wo_t::flush(); + } + }; + + class atr_idle_reg_t : public masked_reg_t { + public: + atr_idle_reg_t(const wb_iface::wb_addr_type offset, masked_reg_t& atr_disable_reg): + masked_reg_t(offset), + _atr_idle_cache(0), _gpio_out_cache(0), + _atr_disable_reg(atr_disable_reg) + { } + + virtual void set_with_mask(const boost::uint32_t value, const boost::uint32_t mask) { + _atr_idle_cache = (value&mask)|(_atr_idle_cache&(~mask)); + } + + virtual boost::uint32_t get() { + return _atr_idle_cache; + } + + void set_gpio_out_with_mask(const boost::uint32_t value, const boost::uint32_t mask) { + _gpio_out_cache = (value&mask)|(_gpio_out_cache&(~mask)); + } + + virtual boost::uint32_t get_gpio_out() { + return _gpio_out_cache; + } + + virtual void flush() { + set(REGISTER, + (_atr_idle_cache & (~_atr_disable_reg.get())) | + (_gpio_out_cache & _atr_disable_reg.get()) + ); + masked_reg_t::flush(); + } + + private: + boost::uint32_t _atr_idle_cache; + boost::uint32_t _gpio_out_cache; + masked_reg_t& _atr_disable_reg; + }; + + wb_iface::sptr _iface; + wb_iface::wb_addr_type _rb_addr; + atr_idle_reg_t _atr_idle_reg; + masked_reg_t _atr_rx_reg; + masked_reg_t _atr_tx_reg; + masked_reg_t _atr_fdx_reg; + masked_reg_t _ddr_reg; + masked_reg_t _atr_disable_reg; +}; + +gpio_atr_3000::sptr gpio_atr_3000::make( + wb_iface::sptr iface, const wb_iface::wb_addr_type base, const wb_iface::wb_addr_type rb_addr +) { + return sptr(new gpio_atr_3000_impl(iface, base, rb_addr)); +} + +gpio_atr_3000::sptr gpio_atr_3000::make_write_only( + wb_iface::sptr iface, const wb_iface::wb_addr_type base +) { + gpio_atr_3000::sptr gpio_iface(new gpio_atr_3000_impl(iface, base)); + gpio_iface->set_gpio_ddr(DDR_OUTPUT, MASK_SET_ALL); + return gpio_iface; +} + +//------------------------------------------------------------- +// db_gpio_atr_3000 +//------------------------------------------------------------- + +class db_gpio_atr_3000_impl : public gpio_atr_3000_impl, public db_gpio_atr_3000 { +public: + db_gpio_atr_3000_impl(wb_iface::sptr iface, const wb_iface::wb_addr_type base, const wb_iface::wb_addr_type rb_addr): + gpio_atr_3000_impl(iface, base, rb_addr) { /* NOP */ } + + inline void set_pin_ctrl(const db_unit_t unit, const boost::uint32_t value, const boost::uint32_t mask) + { + gpio_atr_3000_impl::set_atr_mode(MODE_ATR, compute_mask(unit, value&mask)); + gpio_atr_3000_impl::set_atr_mode(MODE_GPIO, compute_mask(unit, (~value)&mask)); + } + + inline boost::uint32_t get_pin_ctrl(const db_unit_t unit) + { + return (~_atr_disable_reg.get()) >> compute_shift(unit); + } + + inline void set_gpio_ddr(const db_unit_t unit, const boost::uint32_t value, const boost::uint32_t mask) + { + gpio_atr_3000_impl::set_gpio_ddr(DDR_OUTPUT, compute_mask(unit, value&mask)); + gpio_atr_3000_impl::set_gpio_ddr(DDR_INPUT, compute_mask(unit, (~value)&mask)); + } + + inline boost::uint32_t get_gpio_ddr(const db_unit_t unit) + { + return _ddr_reg.get() >> compute_shift(unit); + } + + inline void set_atr_reg(const db_unit_t unit, const gpio_atr_reg_t atr, const boost::uint32_t value, const boost::uint32_t mask) + { + gpio_atr_3000_impl::set_atr_reg(atr, value << compute_shift(unit), compute_mask(unit, mask)); + } + + inline boost::uint32_t get_atr_reg(const db_unit_t unit, const gpio_atr_reg_t atr) + { + masked_reg_t* reg = NULL; + switch (atr) { + case ATR_REG_IDLE: reg = &_atr_idle_reg; break; + case ATR_REG_RX_ONLY: reg = &_atr_rx_reg; break; + case ATR_REG_TX_ONLY: reg = &_atr_tx_reg; break; + case ATR_REG_FULL_DUPLEX: reg = &_atr_fdx_reg; break; + default: reg = &_atr_idle_reg; break; + } + return (reg->get() & compute_mask(unit, MASK_SET_ALL)) >> compute_shift(unit); + } + + inline void set_gpio_out(const db_unit_t unit, const boost::uint32_t value, const boost::uint32_t mask) + { + gpio_atr_3000_impl::set_gpio_out( + static_cast<boost::uint32_t>(value) << compute_shift(unit), + compute_mask(unit, mask)); + } + + inline boost::uint32_t get_gpio_out(const db_unit_t unit) + { + return (_atr_idle_reg.get_gpio_out() & compute_mask(unit, MASK_SET_ALL)) >> compute_shift(unit); + } + + inline boost::uint32_t read_gpio(const db_unit_t unit) + { + return (gpio_atr_3000_impl::read_gpio() & compute_mask(unit, MASK_SET_ALL)) >> compute_shift(unit); + } + +private: + inline boost::uint32_t compute_shift(const db_unit_t unit) { + switch (unit) { + case dboard_iface::UNIT_RX: return 0; + case dboard_iface::UNIT_TX: return 16; + default: return 0; + } + } + + inline boost::uint32_t compute_mask(const db_unit_t unit, const boost::uint32_t mask) { + boost::uint32_t tmp_mask = (unit == dboard_iface::UNIT_BOTH) ? mask : (mask & 0xFFFF); + return tmp_mask << (compute_shift(unit)); + } +}; + +db_gpio_atr_3000::sptr db_gpio_atr_3000::make( + wb_iface::sptr iface, const wb_iface::wb_addr_type base, const wb_iface::wb_addr_type rb_addr +) { + return sptr(new db_gpio_atr_3000_impl(iface, base, rb_addr)); +} + +}}} diff --git a/host/lib/usrp/cores/gpio_atr_3000.hpp b/host/lib/usrp/cores/gpio_atr_3000.hpp new file mode 100644 index 000000000..7b90429fe --- /dev/null +++ b/host/lib/usrp/cores/gpio_atr_3000.hpp @@ -0,0 +1,183 @@ +// +// Copyright 2011,2014,2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_LIBUHD_USRP_GPIO_CORE_3000_HPP +#define INCLUDED_LIBUHD_USRP_GPIO_CORE_3000_HPP + +#include <uhd/config.hpp> +#include <uhd/usrp/dboard_iface.hpp> +#include <uhd/usrp/gpio_defs.hpp> +#include <boost/shared_ptr.hpp> +#include <uhd/types/wb_iface.hpp> + +namespace uhd { namespace usrp { namespace gpio_atr { + +class gpio_atr_3000 : boost::noncopyable { +public: + typedef boost::shared_ptr<gpio_atr_3000> sptr; + + static const boost::uint32_t MASK_SET_ALL = 0xFFFFFFFF; + + virtual ~gpio_atr_3000(void) {}; + + /*! + * Create a read-write GPIO ATR interface object + * + * \param iface register iface to GPIO ATR registers + * \param base base settings offset for GPIO ATR registers + * \param base readback offset for GPIO ATR registers + */ + static sptr make( + uhd::wb_iface::sptr iface, + const uhd::wb_iface::wb_addr_type base, + const uhd::wb_iface::wb_addr_type rb_addr); + + /*! + * Create a write-only GPIO ATR interface object + * + * \param iface register iface to GPIO ATR registers + * \param base base settings offset for GPIO ATR registers + */ + static sptr make_write_only( + uhd::wb_iface::sptr iface, const uhd::wb_iface::wb_addr_type base); + + /*! + * Select the ATR mode for all bits in the mask + * + * \param mode the mode to apply {ATR = outputs driven by ATR state machine, GPIO = outputs static} + * \param mask apply the mode to all non-zero bits in the mask + */ + virtual void set_atr_mode(const gpio_atr_mode_t mode, const boost::uint32_t mask) = 0; + + /*! + * Select the data direction for all bits in the mask + * + * \param dir the direction {OUTPUT, INPUT} + * \param mask apply the mode to all non-zero bits in the mask + */ + virtual void set_gpio_ddr(const gpio_ddr_t dir, const boost::uint32_t mask) = 0; + + /*! + * Write the specified (masked) value to the ATR register + * + * \param atr the type of ATR register to write to {IDLE, RX, TX, FDX} + * \param value the value to write + * \param mask only writes to the bits where mask is non-zero + */ + virtual void set_atr_reg(const gpio_atr_reg_t atr, const boost::uint32_t value, const boost::uint32_t mask = MASK_SET_ALL) = 0; + + /*! + * Write to a static GPIO output + * + * \param value the value to write + * \param mask only writes to the bits where mask is non-zero + */ + virtual void set_gpio_out(const boost::uint32_t value, const boost::uint32_t mask = MASK_SET_ALL) = 0; + + /*! + * Read the state of the GPIO pins + * If a pin is configured as an input, reads the actual value of the pin + * If a pin is configured as an output, reads the last value written to the pin + * + * \return the value read back + */ + virtual boost::uint32_t read_gpio() = 0; + + /*! + * Set a GPIO attribute + * + * \param attr the attribute to set + * \param value the value to write to the attribute + */ + virtual void set_gpio_attr(const gpio_attr_t attr, const boost::uint32_t value) = 0; +}; + +class db_gpio_atr_3000 { +public: + typedef boost::shared_ptr<db_gpio_atr_3000> sptr; + + typedef uhd::usrp::dboard_iface::unit_t db_unit_t; + + virtual ~db_gpio_atr_3000(void) {}; + + /*! + * Create a read-write GPIO ATR interface object for a daughterboard connector + * + * \param iface register iface to GPIO ATR registers + * \param base base settings offset for GPIO ATR registers + * \param base readback offset for GPIO ATR registers + */ + static sptr make( + uhd::wb_iface::sptr iface, + const uhd::wb_iface::wb_addr_type base, + const uhd::wb_iface::wb_addr_type rb_addr); + + /*! + * Configure the GPIO mode for all pins in the daughterboard connector + * + * \param unit the side of the daughterboard interface to configure (TX or RX) + * \param value if value[i] is 1, the i'th bit is in ATR mode otherwise it is in GPIO mode + */ + virtual void set_pin_ctrl(const db_unit_t unit, const boost::uint32_t value, const boost::uint32_t mask) = 0; + + virtual boost::uint32_t get_pin_ctrl(const db_unit_t unit) = 0; + + /*! + * Configure the direction for all pins in the daughterboard connector + * + * \param unit the side of the daughterboard interface to configure (TX or RX) + * \param value if value[i] is 1, the i'th bit is an output otherwise it is an input + */ + virtual void set_gpio_ddr(const db_unit_t unit, const boost::uint32_t value, const boost::uint32_t mask) = 0; + + virtual boost::uint32_t get_gpio_ddr(const db_unit_t unit) = 0; + + /*! + * Write the specified value to the ATR register (all bits) + * + * \param atr the type of ATR register to write to {IDLE, RX, TX, FDX} + * \param unit the side of the daughterboard interface to configure (TX or RX) + * \param value the value to write + */ + virtual void set_atr_reg(const db_unit_t unit, const gpio_atr_reg_t atr, const boost::uint32_t value, const boost::uint32_t mask) = 0; + + virtual boost::uint32_t get_atr_reg(const db_unit_t unit, const gpio_atr_reg_t atr) = 0; + + /*! + * Write the specified value to the GPIO register (all bits) + * + * \param atr the type of ATR register to write to {IDLE, RX, TX, FDX} + * \param value the value to write + */ + virtual void set_gpio_out(const db_unit_t unit, const boost::uint32_t value, const boost::uint32_t mask) = 0; + + virtual boost::uint32_t get_gpio_out(const db_unit_t unit) = 0; + + /*! + * Read the state of the GPIO pins + * If a pin is configured as an input, reads the actual value of the pin + * If a pin is configured as an output, reads the last value written to the pin + * + * \param unit the side of the daughterboard interface to configure (TX or RX) + * \return the value read back + */ + virtual boost::uint32_t read_gpio(const db_unit_t unit) = 0; +}; + +}}} //namespaces + +#endif /* INCLUDED_LIBUHD_USRP_GPIO_CORE_3000_HPP */ diff --git a/host/lib/usrp/cores/gpio_core_200.cpp b/host/lib/usrp/cores/gpio_core_200.cpp index 78ad00bb5..57a52405c 100644 --- a/host/lib/usrp/cores/gpio_core_200.cpp +++ b/host/lib/usrp/cores/gpio_core_200.cpp @@ -27,6 +27,11 @@ using namespace uhd; using namespace usrp; +template <typename T> +static void shadow_it(T &shadow, const T &value, const T &mask){ + shadow = (shadow & ~mask) | (value & mask); +} + gpio_core_200::~gpio_core_200(void){ /* NOP */ } @@ -36,13 +41,20 @@ public: gpio_core_200_impl(wb_iface::sptr iface, const size_t base, const size_t rb_addr): _iface(iface), _base(base), _rb_addr(rb_addr), _first_atr(true) { /* NOP */ } - void set_pin_ctrl(const unit_t unit, const boost::uint16_t value){ - _pin_ctrl[unit] = value; //shadow + void set_pin_ctrl(const unit_t unit, const boost::uint16_t value, const boost::uint16_t mask){ + if (unit == dboard_iface::UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported in gpio_core_200"); + shadow_it(_pin_ctrl[unit], value, mask); update(); //full update } - void set_atr_reg(const unit_t unit, const atr_reg_t atr, const boost::uint16_t value){ - _atr_regs[unit][atr] = value; //shadow + boost::uint16_t get_pin_ctrl(unit_t unit){ + if (unit == dboard_iface::UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported in gpio_core_200"); + return _pin_ctrl[unit]; + } + + void set_atr_reg(const unit_t unit, const atr_reg_t atr, const boost::uint16_t value, const boost::uint16_t mask){ + if (unit == dboard_iface::UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported in gpio_core_200"); + shadow_it(_atr_regs[unit][atr], value, mask); if (_first_atr) { // To preserve legacy behavior, update all registers the first time @@ -53,20 +65,38 @@ public: update(atr); } - void set_gpio_ddr(const unit_t unit, const boost::uint16_t value){ - _gpio_ddr[unit] = value; //shadow + boost::uint16_t get_atr_reg(unit_t unit, atr_reg_t reg){ + if (unit == dboard_iface::UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported in gpio_core_200"); + return _atr_regs[unit][reg]; + } + + void set_gpio_ddr(const unit_t unit, const boost::uint16_t value, const boost::uint16_t mask){ + if (unit == dboard_iface::UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported in gpio_core_200"); + shadow_it(_gpio_ddr[unit], value, mask); _iface->poke32(REG_GPIO_DDR, //update the 32 bit register (boost::uint32_t(_gpio_ddr[dboard_iface::UNIT_RX]) << shift_by_unit(dboard_iface::UNIT_RX)) | (boost::uint32_t(_gpio_ddr[dboard_iface::UNIT_TX]) << shift_by_unit(dboard_iface::UNIT_TX)) ); } - void set_gpio_out(const unit_t unit, const boost::uint16_t value){ - _gpio_out[unit] = value; //shadow + boost::uint16_t get_gpio_ddr(unit_t unit){ + if (unit == dboard_iface::UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported in gpio_core_200"); + return _gpio_ddr[unit]; + } + + void set_gpio_out(const unit_t unit, const boost::uint16_t value, const boost::uint16_t mask){ + if (unit == dboard_iface::UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported in gpio_core_200"); + shadow_it(_gpio_out[unit], value, mask); this->update(); //full update } + boost::uint16_t get_gpio_out(unit_t unit){ + if (unit == dboard_iface::UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported in gpio_core_200"); + return _gpio_out[unit]; + } + boost::uint16_t read_gpio(const unit_t unit){ + if (unit == dboard_iface::UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported in gpio_core_200"); return boost::uint16_t(_iface->peek32(_rb_addr) >> shift_by_unit(unit)); } @@ -85,26 +115,26 @@ private: } void update(void){ - update(dboard_iface::ATR_REG_IDLE); - update(dboard_iface::ATR_REG_TX_ONLY); - update(dboard_iface::ATR_REG_RX_ONLY); - update(dboard_iface::ATR_REG_FULL_DUPLEX); + update(gpio_atr::ATR_REG_IDLE); + update(gpio_atr::ATR_REG_TX_ONLY); + update(gpio_atr::ATR_REG_RX_ONLY); + update(gpio_atr::ATR_REG_FULL_DUPLEX); } void update(const atr_reg_t atr){ size_t addr; switch (atr) { - case dboard_iface::ATR_REG_IDLE: + case gpio_atr::ATR_REG_IDLE: addr = REG_GPIO_IDLE; break; - case dboard_iface::ATR_REG_TX_ONLY: + case gpio_atr::ATR_REG_TX_ONLY: addr = REG_GPIO_TX_ONLY; break; - case dboard_iface::ATR_REG_RX_ONLY: + case gpio_atr::ATR_REG_RX_ONLY: addr = REG_GPIO_IDLE; break; - case dboard_iface::ATR_REG_FULL_DUPLEX: + case gpio_atr::ATR_REG_FULL_DUPLEX: addr = REG_GPIO_RX_ONLY; break; default: @@ -148,23 +178,23 @@ public: } void set_atr_reg(const atr_reg_t atr, const boost::uint32_t value){ - if (atr == dboard_iface::ATR_REG_IDLE) + if (atr == gpio_atr::ATR_REG_IDLE) _iface->poke32(REG_GPIO_IDLE, value); - else if (atr == dboard_iface::ATR_REG_TX_ONLY) + else if (atr == gpio_atr::ATR_REG_TX_ONLY) _iface->poke32(REG_GPIO_TX_ONLY, value); - else if (atr == dboard_iface::ATR_REG_RX_ONLY) + else if (atr == gpio_atr::ATR_REG_RX_ONLY) _iface->poke32(REG_GPIO_RX_ONLY, value); - else if (atr == dboard_iface::ATR_REG_FULL_DUPLEX) + else if (atr == gpio_atr::ATR_REG_FULL_DUPLEX) _iface->poke32(REG_GPIO_BOTH, value); else UHD_THROW_INVALID_CODE_PATH(); } void set_all_regs(const boost::uint32_t value){ - set_atr_reg(dboard_iface::ATR_REG_IDLE, value); - set_atr_reg(dboard_iface::ATR_REG_TX_ONLY, value); - set_atr_reg(dboard_iface::ATR_REG_RX_ONLY, value); - set_atr_reg(dboard_iface::ATR_REG_FULL_DUPLEX, value); + set_atr_reg(gpio_atr::ATR_REG_IDLE, value); + set_atr_reg(gpio_atr::ATR_REG_TX_ONLY, value); + set_atr_reg(gpio_atr::ATR_REG_RX_ONLY, value); + set_atr_reg(gpio_atr::ATR_REG_FULL_DUPLEX, value); } private: diff --git a/host/lib/usrp/cores/gpio_core_200.hpp b/host/lib/usrp/cores/gpio_core_200.hpp index e22834fd9..67aa8bde8 100644 --- a/host/lib/usrp/cores/gpio_core_200.hpp +++ b/host/lib/usrp/cores/gpio_core_200.hpp @@ -20,6 +20,7 @@ #include <uhd/config.hpp> #include <uhd/usrp/dboard_iface.hpp> +#include <uhd/usrp/gpio_defs.hpp> #include <boost/assign.hpp> #include <boost/cstdint.hpp> #include <boost/utility.hpp> @@ -27,28 +28,6 @@ #include <uhd/types/wb_iface.hpp> #include <map> -typedef enum { - GPIO_CTRL, - GPIO_DDR, - GPIO_OUT, - GPIO_ATR_0X, - GPIO_ATR_RX, - GPIO_ATR_TX, - GPIO_ATR_XX -} gpio_attr_t; - -typedef std::map<gpio_attr_t,std::string> gpio_attr_map_t; -static const gpio_attr_map_t gpio_attr_map = - boost::assign::map_list_of - (GPIO_CTRL, "CTRL") - (GPIO_DDR, "DDR") - (GPIO_OUT, "OUT") - (GPIO_ATR_0X, "ATR_0X") - (GPIO_ATR_RX, "ATR_RX") - (GPIO_ATR_TX, "ATR_TX") - (GPIO_ATR_XX, "ATR_XX") -; - class gpio_core_200 : boost::noncopyable{ public: typedef boost::shared_ptr<gpio_core_200> sptr; @@ -59,20 +38,32 @@ public: virtual ~gpio_core_200(void) = 0; //! makes a new GPIO core from iface and slave base - static sptr make(uhd::wb_iface::sptr iface, const size_t base, const size_t rb_addr); + static sptr make( + uhd::wb_iface::sptr iface, const size_t base, const size_t rb_addr); //! 1 = ATR - virtual void set_pin_ctrl(const unit_t unit, const boost::uint16_t value) = 0; + virtual void set_pin_ctrl( + const unit_t unit, const boost::uint16_t value, const boost::uint16_t mask) = 0; + + virtual boost::uint16_t get_pin_ctrl(unit_t unit) = 0; + + virtual void set_atr_reg( + const unit_t unit, const atr_reg_t atr, const boost::uint16_t value, const boost::uint16_t mask) = 0; - virtual void set_atr_reg(const unit_t unit, const atr_reg_t atr, const boost::uint16_t value) = 0; + virtual boost::uint16_t get_atr_reg(unit_t unit, atr_reg_t reg) = 0; //! 1 = OUTPUT - virtual void set_gpio_ddr(const unit_t unit, const boost::uint16_t value) = 0; + virtual void set_gpio_ddr( + const unit_t unit, const boost::uint16_t value, const boost::uint16_t mask) = 0; - virtual void set_gpio_out(const unit_t unit, const boost::uint16_t value) = 0; + virtual boost::uint16_t get_gpio_ddr(unit_t unit) = 0; - virtual boost::uint16_t read_gpio(const unit_t unit) = 0; + virtual void set_gpio_out( + const unit_t unit, const boost::uint16_t value, const boost::uint16_t mask) = 0; + + virtual boost::uint16_t get_gpio_out(unit_t unit) = 0; + virtual boost::uint16_t read_gpio(const unit_t unit) = 0; }; //! Simple wrapper for 32 bit write only diff --git a/host/lib/usrp/cores/rx_dsp_core_200.cpp b/host/lib/usrp/cores/rx_dsp_core_200.cpp index b899085c0..e51862d3b 100644 --- a/host/lib/usrp/cores/rx_dsp_core_200.cpp +++ b/host/lib/usrp/cores/rx_dsp_core_200.cpp @@ -16,6 +16,7 @@ // #include "rx_dsp_core_200.hpp" +#include "dsp_core_utils.hpp" #include <uhd/types/dict.hpp> #include <uhd/exception.hpp> #include <uhd/utils/math.hpp> @@ -24,7 +25,6 @@ #include <boost/assign/list_of.hpp> #include <boost/thread/thread.hpp> //thread sleep #include <boost/math/special_functions/round.hpp> -#include <boost/math/special_functions/sign.hpp> #include <boost/numeric/conversion/bounds.hpp> #include <algorithm> #include <cmath> @@ -223,42 +223,11 @@ public: return _fxpt_scalar_correction*_host_extra_scaling/32767.; } - double set_freq(const double freq_){ - //correct for outside of rate (wrap around) - double freq = std::fmod(freq_, _tick_rate); - if (std::abs(freq) > _tick_rate/2.0) - freq -= boost::math::sign(freq)*_tick_rate; - - //confirm that the target frequency is within range of the CORDIC - UHD_ASSERT_THROW(std::abs(freq) <= _tick_rate/2.0); - - /* Now calculate the frequency word. It is possible for this calculation - * to cause an overflow. As the requested DSP frequency approaches the - * master clock rate, that ratio multiplied by the scaling factor (2^32) - * will generally overflow within the last few kHz of tunable range. - * Thus, we check to see if the operation will overflow before doing it, - * and if it will, we set it to the integer min or max of this system. - */ - boost::int32_t freq_word = 0; - - static const double scale_factor = std::pow(2.0, 32); - if((freq / _tick_rate) >= (uhd::math::BOOST_INT32_MAX / scale_factor)) { - /* Operation would have caused a positive overflow of int32. */ - freq_word = uhd::math::BOOST_INT32_MAX; - - } else if((freq / _tick_rate) <= (uhd::math::BOOST_INT32_MIN / scale_factor)) { - /* Operation would have caused a negative overflow of int32. */ - freq_word = uhd::math::BOOST_INT32_MIN; - - } else { - /* The operation is safe. Perform normally. */ - freq_word = boost::int32_t(boost::math::round((freq / _tick_rate) * scale_factor)); - } - - //program the frequency word into the device DSP - const double actual_freq = (double(freq_word) / scale_factor) * _tick_rate; + double set_freq(const double requested_freq){ + double actual_freq; + int32_t freq_word; + get_freq_and_freq_word(requested_freq, _tick_rate, actual_freq, freq_word); _iface->poke32(REG_DSP_RX_FREQ, boost::uint32_t(freq_word)); - return actual_freq; } diff --git a/host/lib/usrp/cores/rx_dsp_core_3000.cpp b/host/lib/usrp/cores/rx_dsp_core_3000.cpp index 035bc6a3f..eedbbef95 100644 --- a/host/lib/usrp/cores/rx_dsp_core_3000.cpp +++ b/host/lib/usrp/cores/rx_dsp_core_3000.cpp @@ -16,6 +16,7 @@ // #include "rx_dsp_core_3000.hpp" +#include "dsp_core_utils.hpp" #include <uhd/types/dict.hpp> #include <uhd/exception.hpp> #include <uhd/utils/math.hpp> @@ -24,7 +25,6 @@ #include <boost/assign/list_of.hpp> #include <boost/thread/thread.hpp> //thread sleep #include <boost/math/special_functions/round.hpp> -#include <boost/math/special_functions/sign.hpp> #include <algorithm> #include <cmath> @@ -69,6 +69,7 @@ public: _scaling_adjustment = 1.0; _dsp_extra_scaling = 1.0; _tick_rate = 1.0; + _dsp_freq_offset = 0.0; } ~rx_dsp_core_3000_impl(void) @@ -79,17 +80,41 @@ public: ) } - void set_mux(const std::string &mode, const bool fe_swapped, const bool invert_i, const bool invert_q){ - static const uhd::dict<std::string, boost::uint32_t> mode_to_mux = boost::assign::map_list_of - ("IQ", 0) - ("QI", FLAG_DSP_RX_MUX_SWAP_IQ) - ("I", FLAG_DSP_RX_MUX_REAL_MODE) - ("Q", FLAG_DSP_RX_MUX_SWAP_IQ | FLAG_DSP_RX_MUX_REAL_MODE) - ; - _iface->poke32(REG_DSP_RX_MUX, mode_to_mux[mode] - | (fe_swapped ? FLAG_DSP_RX_MUX_SWAP_IQ : 0) - | (invert_i ? FLAG_DSP_RX_MUX_INVERT_I : 0) - | (invert_q ? FLAG_DSP_RX_MUX_INVERT_Q : 0)); + void set_mux(const uhd::usrp::fe_connection_t& fe_conn){ + boost::uint32_t reg_val = 0; + switch (fe_conn.get_sampling_mode()) { + case uhd::usrp::fe_connection_t::REAL: + case uhd::usrp::fe_connection_t::HETERODYNE: + reg_val = FLAG_DSP_RX_MUX_REAL_MODE; + break; + default: + reg_val = 0; + break; + } + + if (fe_conn.is_iq_swapped()) reg_val |= FLAG_DSP_RX_MUX_SWAP_IQ; + if (fe_conn.is_i_inverted()) reg_val |= FLAG_DSP_RX_MUX_INVERT_I; + if (fe_conn.is_q_inverted()) reg_val |= FLAG_DSP_RX_MUX_INVERT_Q; + + _iface->poke32(REG_DSP_RX_MUX, reg_val); + + if (fe_conn.get_sampling_mode() == uhd::usrp::fe_connection_t::HETERODYNE) { + //1. Remember the sign of the IF frequency. + // It will be discarded in the next step + int if_freq_sign = boost::math::sign(fe_conn.get_if_freq()); + //2. Map IF frequency to the range [0, _tick_rate) + double if_freq = std::abs(std::fmod(fe_conn.get_if_freq(), _tick_rate)); + //3. Map IF frequency to the range [-_tick_rate/2, _tick_rate/2) + // This is the aliased frequency + if (if_freq > (_tick_rate / 2.0)) { + if_freq -= _tick_rate; + } + //4. Set DSP offset to spin the signal in the opposite + // direction as the aliased frequency + _dsp_freq_offset = if_freq * (-if_freq_sign); + } else { + _dsp_freq_offset = 0.0; + } } void set_tick_rate(const double rate){ @@ -209,47 +234,18 @@ public: return _fxpt_scalar_correction*_host_extra_scaling/32767.; } - double set_freq(const double freq_){ - //correct for outside of rate (wrap around) - double freq = std::fmod(freq_, _tick_rate); - if (std::abs(freq) > _tick_rate/2.0) - freq -= boost::math::sign(freq)*_tick_rate; - - //confirm that the target frequency is within range of the CORDIC - UHD_ASSERT_THROW(std::abs(freq) <= _tick_rate/2.0); - - /* Now calculate the frequency word. It is possible for this calculation - * to cause an overflow. As the requested DSP frequency approaches the - * master clock rate, that ratio multiplied by the scaling factor (2^32) - * will generally overflow within the last few kHz of tunable range. - * Thus, we check to see if the operation will overflow before doing it, - * and if it will, we set it to the integer min or max of this system. - */ - boost::int32_t freq_word = 0; - - static const double scale_factor = std::pow(2.0, 32); - if((freq / _tick_rate) >= (uhd::math::BOOST_INT32_MAX / scale_factor)) { - /* Operation would have caused a positive overflow of int32. */ - freq_word = uhd::math::BOOST_INT32_MAX; - - } else if((freq / _tick_rate) <= (uhd::math::BOOST_INT32_MIN / scale_factor)) { - /* Operation would have caused a negative overflow of int32. */ - freq_word = uhd::math::BOOST_INT32_MIN; - - } else { - /* The operation is safe. Perform normally. */ - freq_word = boost::int32_t(boost::math::round((freq / _tick_rate) * scale_factor)); - } - - //program the frequency word into the device DSP - const double actual_freq = (double(freq_word) / scale_factor) * _tick_rate; + double set_freq(const double requested_freq){ + double actual_freq; + int32_t freq_word; + get_freq_and_freq_word(requested_freq + _dsp_freq_offset, _tick_rate, actual_freq, freq_word); _iface->poke32(REG_DSP_RX_FREQ, boost::uint32_t(freq_word)); - return actual_freq; } uhd::meta_range_t get_freq_range(void){ - return uhd::meta_range_t(-_tick_rate/2, +_tick_rate/2, _tick_rate/std::pow(2.0, 32)); + //Too keep the DSP range symmetric about 0, we use abs(_dsp_freq_offset) + const double offset = std::abs<double>(_dsp_freq_offset); + return uhd::meta_range_t(-(_tick_rate-offset)/2, +(_tick_rate-offset)/2, _tick_rate/std::pow(2.0, 32)); } void setup(const uhd::stream_args_t &stream_args){ @@ -284,18 +280,18 @@ public: void populate_subtree(property_tree::sptr subtree) { subtree->create<meta_range_t>("rate/range") - .publish(boost::bind(&rx_dsp_core_3000::get_host_rates, this)) + .set_publisher(boost::bind(&rx_dsp_core_3000::get_host_rates, this)) ; subtree->create<double>("rate/value") .set(DEFAULT_RATE) - .coerce(boost::bind(&rx_dsp_core_3000::set_host_rate, this, _1)) + .set_coercer(boost::bind(&rx_dsp_core_3000::set_host_rate, this, _1)) ; subtree->create<double>("freq/value") .set(DEFAULT_CORDIC_FREQ) - .coerce(boost::bind(&rx_dsp_core_3000::set_freq, this, _1)) + .set_coercer(boost::bind(&rx_dsp_core_3000::set_freq, this, _1)) ; subtree->create<meta_range_t>("freq/range") - .publish(boost::bind(&rx_dsp_core_3000::get_freq_range, this)) + .set_publisher(boost::bind(&rx_dsp_core_3000::get_freq_range, this)) ; } @@ -305,6 +301,7 @@ private: const bool _is_b200; //TODO: Obsolete this when we switch to the new DDC on the B200 double _tick_rate, _link_rate; double _scaling_adjustment, _dsp_extra_scaling, _host_extra_scaling, _fxpt_scalar_correction; + double _dsp_freq_offset; }; rx_dsp_core_3000::sptr rx_dsp_core_3000::make(wb_iface::sptr iface, const size_t dsp_base, const bool is_b200 /* = false */) diff --git a/host/lib/usrp/cores/rx_dsp_core_3000.hpp b/host/lib/usrp/cores/rx_dsp_core_3000.hpp index 65801de1d..41b328357 100644 --- a/host/lib/usrp/cores/rx_dsp_core_3000.hpp +++ b/host/lib/usrp/cores/rx_dsp_core_3000.hpp @@ -24,6 +24,7 @@ #include <uhd/types/stream_cmd.hpp> #include <uhd/types/wb_iface.hpp> #include <uhd/property_tree.hpp> +#include <uhd/usrp/fe_connection.hpp> #include <boost/utility.hpp> #include <boost/shared_ptr.hpp> #include <string> @@ -43,7 +44,7 @@ public: const bool is_b200 = false //TODO: Obsolete this when we switch to the new DDC on the B200 ); - virtual void set_mux(const std::string &mode, const bool fe_swapped = false, const bool invert_i = false, const bool invert_q = false) = 0; + virtual void set_mux(const uhd::usrp::fe_connection_t& fe_conn) = 0; virtual void set_tick_rate(const double rate) = 0; diff --git a/host/lib/usrp/cores/rx_frontend_core_200.cpp b/host/lib/usrp/cores/rx_frontend_core_200.cpp index 7ac920553..0a60bf87c 100644 --- a/host/lib/usrp/cores/rx_frontend_core_200.cpp +++ b/host/lib/usrp/cores/rx_frontend_core_200.cpp @@ -83,15 +83,15 @@ public: { subtree->create<std::complex<double> >("dc_offset/value") .set(DEFAULT_DC_OFFSET_VALUE) - .coerce(boost::bind(&rx_frontend_core_200::set_dc_offset, this, _1)) + .set_coercer(boost::bind(&rx_frontend_core_200::set_dc_offset, this, _1)) ; subtree->create<bool>("dc_offset/enable") .set(DEFAULT_DC_OFFSET_ENABLE) - .subscribe(boost::bind(&rx_frontend_core_200::set_dc_offset_auto, this, _1)) + .add_coerced_subscriber(boost::bind(&rx_frontend_core_200::set_dc_offset_auto, this, _1)) ; subtree->create<std::complex<double> >("iq_balance/value") .set(DEFAULT_IQ_BALANCE_VALUE) - .subscribe(boost::bind(&rx_frontend_core_200::set_iq_balance, this, _1)) + .add_coerced_subscriber(boost::bind(&rx_frontend_core_200::set_iq_balance, this, _1)) ; } diff --git a/host/lib/usrp/cores/tx_dsp_core_200.cpp b/host/lib/usrp/cores/tx_dsp_core_200.cpp index 2ef9f4406..4c456a10d 100644 --- a/host/lib/usrp/cores/tx_dsp_core_200.cpp +++ b/host/lib/usrp/cores/tx_dsp_core_200.cpp @@ -16,13 +16,13 @@ // #include "tx_dsp_core_200.hpp" +#include "dsp_core_utils.hpp" #include <uhd/types/dict.hpp> #include <uhd/exception.hpp> #include <uhd/utils/math.hpp> #include <uhd/utils/msg.hpp> #include <boost/assign/list_of.hpp> #include <boost/math/special_functions/round.hpp> -#include <boost/math/special_functions/sign.hpp> #include <boost/thread/thread.hpp> //sleep #include <algorithm> #include <cmath> @@ -163,42 +163,11 @@ public: return _fxpt_scalar_correction*_host_extra_scaling*32767.; } - double set_freq(const double freq_){ - //correct for outside of rate (wrap around) - double freq = std::fmod(freq_, _tick_rate); - if (std::abs(freq) > _tick_rate/2.0) - freq -= boost::math::sign(freq)*_tick_rate; - - //confirm that the target frequency is within range of the CORDIC - UHD_ASSERT_THROW(std::abs(freq) <= _tick_rate/2.0); - - /* Now calculate the frequency word. It is possible for this calculation - * to cause an overflow. As the requested DSP frequency approaches the - * master clock rate, that ratio multiplied by the scaling factor (2^32) - * will generally overflow within the last few kHz of tunable range. - * Thus, we check to see if the operation will overflow before doing it, - * and if it will, we set it to the integer min or max of this system. - */ - boost::int32_t freq_word = 0; - - static const double scale_factor = std::pow(2.0, 32); - if((freq / _tick_rate) >= (uhd::math::BOOST_INT32_MAX / scale_factor)) { - /* Operation would have caused a positive overflow of int32. */ - freq_word = uhd::math::BOOST_INT32_MAX; - - } else if((freq / _tick_rate) <= (uhd::math::BOOST_INT32_MIN / scale_factor)) { - /* Operation would have caused a negative overflow of int32. */ - freq_word = uhd::math::BOOST_INT32_MIN; - - } else { - /* The operation is safe. Perform normally. */ - freq_word = boost::int32_t(boost::math::round((freq / _tick_rate) * scale_factor)); - } - - //program the frequency word into the device DSP - const double actual_freq = (double(freq_word) / scale_factor) * _tick_rate; + double set_freq(const double requested_freq){ + double actual_freq; + int32_t freq_word; + get_freq_and_freq_word(requested_freq, _tick_rate, actual_freq, freq_word); _iface->poke32(REG_DSP_TX_FREQ, boost::uint32_t(freq_word)); - return actual_freq; } diff --git a/host/lib/usrp/cores/tx_dsp_core_3000.cpp b/host/lib/usrp/cores/tx_dsp_core_3000.cpp index 7e447ae7d..3889bbdc4 100644 --- a/host/lib/usrp/cores/tx_dsp_core_3000.cpp +++ b/host/lib/usrp/cores/tx_dsp_core_3000.cpp @@ -16,13 +16,13 @@ // #include "tx_dsp_core_3000.hpp" +#include "dsp_core_utils.hpp" #include <uhd/types/dict.hpp> #include <uhd/exception.hpp> #include <uhd/utils/math.hpp> #include <uhd/utils/msg.hpp> #include <boost/assign/list_of.hpp> #include <boost/math/special_functions/round.hpp> -#include <boost/math/special_functions/sign.hpp> #include <boost/thread/thread.hpp> //sleep #include <algorithm> #include <cmath> @@ -136,42 +136,11 @@ public: return _fxpt_scalar_correction*_host_extra_scaling*32767.; } - double set_freq(const double freq_){ - //correct for outside of rate (wrap around) - double freq = std::fmod(freq_, _tick_rate); - if (std::abs(freq) > _tick_rate/2.0) - freq -= boost::math::sign(freq)*_tick_rate; - - //confirm that the target frequency is within range of the CORDIC - UHD_ASSERT_THROW(std::abs(freq) <= _tick_rate/2.0); - - /* Now calculate the frequency word. It is possible for this calculation - * to cause an overflow. As the requested DSP frequency approaches the - * master clock rate, that ratio multiplied by the scaling factor (2^32) - * will generally overflow within the last few kHz of tunable range. - * Thus, we check to see if the operation will overflow before doing it, - * and if it will, we set it to the integer min or max of this system. - */ - boost::int32_t freq_word = 0; - - static const double scale_factor = std::pow(2.0, 32); - if((freq / _tick_rate) >= (uhd::math::BOOST_INT32_MAX / scale_factor)) { - /* Operation would have caused a positive overflow of int32. */ - freq_word = uhd::math::BOOST_INT32_MAX; - - } else if((freq / _tick_rate) <= (uhd::math::BOOST_INT32_MIN / scale_factor)) { - /* Operation would have caused a negative overflow of int32. */ - freq_word = uhd::math::BOOST_INT32_MIN; - - } else { - /* The operation is safe. Perform normally. */ - freq_word = boost::int32_t(boost::math::round((freq / _tick_rate) * scale_factor)); - } - - //program the frequency word into the device DSP - const double actual_freq = (double(freq_word) / scale_factor) * _tick_rate; + double set_freq(const double requested_freq) { + double actual_freq; + int32_t freq_word; + get_freq_and_freq_word(requested_freq, _tick_rate, actual_freq, freq_word); _iface->poke32(REG_DSP_TX_FREQ, boost::uint32_t(freq_word)); - return actual_freq; } @@ -211,18 +180,18 @@ public: void populate_subtree(property_tree::sptr subtree) { subtree->create<meta_range_t>("rate/range") - .publish(boost::bind(&tx_dsp_core_3000::get_host_rates, this)) + .set_publisher(boost::bind(&tx_dsp_core_3000::get_host_rates, this)) ; subtree->create<double>("rate/value") .set(DEFAULT_RATE) - .coerce(boost::bind(&tx_dsp_core_3000::set_host_rate, this, _1)) + .set_coercer(boost::bind(&tx_dsp_core_3000::set_host_rate, this, _1)) ; subtree->create<double>("freq/value") .set(DEFAULT_CORDIC_FREQ) - .coerce(boost::bind(&tx_dsp_core_3000::set_freq, this, _1)) + .set_coercer(boost::bind(&tx_dsp_core_3000::set_freq, this, _1)) ; subtree->create<meta_range_t>("freq/range") - .publish(boost::bind(&tx_dsp_core_3000::get_freq_range, this)) + .set_publisher(boost::bind(&tx_dsp_core_3000::get_freq_range, this)) ; } diff --git a/host/lib/usrp/cores/tx_frontend_core_200.cpp b/host/lib/usrp/cores/tx_frontend_core_200.cpp index 0fa028571..be4f77f39 100644 --- a/host/lib/usrp/cores/tx_frontend_core_200.cpp +++ b/host/lib/usrp/cores/tx_frontend_core_200.cpp @@ -79,11 +79,11 @@ public: { subtree->create< std::complex<double> >("dc_offset/value") .set(DEFAULT_DC_OFFSET_VALUE) - .coerce(boost::bind(&tx_frontend_core_200::set_dc_offset, this, _1)) + .set_coercer(boost::bind(&tx_frontend_core_200::set_dc_offset, this, _1)) ; subtree->create< std::complex<double> >("iq_balance/value") .set(DEFAULT_IQ_BALANCE_VALUE) - .subscribe(boost::bind(&tx_frontend_core_200::set_iq_balance, this, _1)) + .add_coerced_subscriber(boost::bind(&tx_frontend_core_200::set_iq_balance, this, _1)) ; } diff --git a/host/lib/usrp/cores/tx_vita_core_3000.cpp b/host/lib/usrp/cores/tx_vita_core_3000.cpp index 71a2b7e21..c76b384d9 100644 --- a/host/lib/usrp/cores/tx_vita_core_3000.cpp +++ b/host/lib/usrp/cores/tx_vita_core_3000.cpp @@ -18,9 +18,11 @@ #include "tx_vita_core_3000.hpp" #include <uhd/utils/safe_call.hpp> -#define REG_CTRL_ERROR_POLICY _base + 0 -#define REG_DEFRAMER_CYCLE_FC_UPS _base + 2*4 + 0 -#define REG_DEFRAMER_PACKET_FC_UPS _base + 2*4 + 4 +#define REG_CTRL_ERROR_POLICY (_base + 0) +#define REG_FC_PRE_RADIO_RESP_BASE (_base + 2*4) +#define REG_FC_PRE_FIFO_RESP_BASE (_base + 4*4) +#define REG_CTRL_FC_CYCLE_OFFSET (0*4) +#define REG_CTRL_FC_PACKET_OFFSET (1*4) using namespace uhd; @@ -32,12 +34,22 @@ struct tx_vita_core_3000_impl : tx_vita_core_3000 { tx_vita_core_3000_impl( wb_iface::sptr iface, - const size_t base + const size_t base, + fc_monitor_loc fc_location ): _iface(iface), - _base(base) + _base(base), + _fc_base((fc_location==FC_PRE_RADIO or fc_location==FC_DEFAULT) ? + REG_FC_PRE_RADIO_RESP_BASE : REG_FC_PRE_FIFO_RESP_BASE), + _fc_location(fc_location) { - this->set_tick_rate(1); //init to non zero + if (fc_location != FC_DEFAULT) { + //Turn off the other FC monitoring module + const size_t other_fc_base = (fc_location==FC_PRE_RADIO) ? + REG_FC_PRE_FIFO_RESP_BASE : REG_FC_PRE_RADIO_RESP_BASE; + _iface->poke32(other_fc_base + REG_CTRL_FC_CYCLE_OFFSET, 0); + _iface->poke32(other_fc_base + REG_CTRL_FC_PACKET_OFFSET, 0); + } this->set_underflow_policy("next_packet"); this->clear(); } @@ -56,11 +68,6 @@ struct tx_vita_core_3000_impl : tx_vita_core_3000 this->set_underflow_policy(_policy); //clears the seq } - void set_tick_rate(const double rate) - { - _tick_rate = rate; - } - void set_underflow_policy(const std::string &policy) { if (policy == "next_packet") @@ -89,23 +96,35 @@ struct tx_vita_core_3000_impl : tx_vita_core_3000 void configure_flow_control(const size_t cycs_per_up, const size_t pkts_per_up) { - if (cycs_per_up == 0) _iface->poke32(REG_DEFRAMER_CYCLE_FC_UPS, 0); - else _iface->poke32(REG_DEFRAMER_CYCLE_FC_UPS, (1 << 31) | ((cycs_per_up) & 0xffffff)); + if (cycs_per_up == 0) _iface->poke32(_fc_base + REG_CTRL_FC_CYCLE_OFFSET, 0); + else _iface->poke32(_fc_base + REG_CTRL_FC_CYCLE_OFFSET, (1 << 31) | ((cycs_per_up) & 0xffffff)); - if (pkts_per_up == 0) _iface->poke32(REG_DEFRAMER_PACKET_FC_UPS, 0); - else _iface->poke32(REG_DEFRAMER_PACKET_FC_UPS, (1 << 31) | ((pkts_per_up) & 0xffff)); + if (pkts_per_up == 0) _iface->poke32(_fc_base + REG_CTRL_FC_PACKET_OFFSET, 0); + else _iface->poke32(_fc_base + REG_CTRL_FC_PACKET_OFFSET, (1 << 31) | ((pkts_per_up) & 0xffff)); } - wb_iface::sptr _iface; - const size_t _base; - double _tick_rate; - std::string _policy; + wb_iface::sptr _iface; + const size_t _base; + const size_t _fc_base; + std::string _policy; + fc_monitor_loc _fc_location; + }; tx_vita_core_3000::sptr tx_vita_core_3000::make( wb_iface::sptr iface, + const size_t base, + fc_monitor_loc fc_location +) +{ + return tx_vita_core_3000::sptr(new tx_vita_core_3000_impl(iface, base, fc_location)); +} + +tx_vita_core_3000::sptr tx_vita_core_3000::make_no_radio_buff( + wb_iface::sptr iface, const size_t base ) { - return tx_vita_core_3000::sptr(new tx_vita_core_3000_impl(iface, base)); + //No internal radio buffer so only pre-radio monitoring is supported. + return tx_vita_core_3000::sptr(new tx_vita_core_3000_impl(iface, base, FC_DEFAULT)); } diff --git a/host/lib/usrp/cores/tx_vita_core_3000.hpp b/host/lib/usrp/cores/tx_vita_core_3000.hpp index 4c0052d4f..bd0f20ba4 100644 --- a/host/lib/usrp/cores/tx_vita_core_3000.hpp +++ b/host/lib/usrp/cores/tx_vita_core_3000.hpp @@ -32,17 +32,27 @@ class tx_vita_core_3000 : boost::noncopyable public: typedef boost::shared_ptr<tx_vita_core_3000> sptr; + enum fc_monitor_loc { + FC_DEFAULT, + FC_PRE_RADIO, + FC_PRE_FIFO + }; + virtual ~tx_vita_core_3000(void) = 0; static sptr make( uhd::wb_iface::sptr iface, + const size_t base, + fc_monitor_loc fc_location = FC_PRE_RADIO + ); + + static sptr make_no_radio_buff( + uhd::wb_iface::sptr iface, const size_t base ); virtual void clear(void) = 0; - virtual void set_tick_rate(const double rate) = 0; - virtual void setup(const uhd::stream_args_t &stream_args) = 0; virtual void configure_flow_control(const size_t cycs_per_up, const size_t pkts_per_up) = 0; diff --git a/host/lib/usrp/cores/user_settings_core_3000.cpp b/host/lib/usrp/cores/user_settings_core_3000.cpp new file mode 100644 index 000000000..549264f57 --- /dev/null +++ b/host/lib/usrp/cores/user_settings_core_3000.cpp @@ -0,0 +1,85 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "user_settings_core_3000.hpp" +#include <uhd/exception.hpp> +#include <boost/thread/thread.hpp> + +using namespace uhd; + +#define REG_USER_SR_ADDR _sr_base_addr + 0 +#define REG_USER_SR_DATA _sr_base_addr + 4 +#define REG_USER_RB_ADDR _sr_base_addr + 8 + +class user_settings_core_3000_impl : public user_settings_core_3000 { +public: + user_settings_core_3000_impl( + wb_iface::sptr iface, + const wb_addr_type sr_base_addr, const wb_addr_type rb_reg_addr): + _iface(iface), _sr_base_addr(sr_base_addr), _rb_reg_addr(rb_reg_addr) + { + } + + void poke64(const wb_addr_type offset, const boost::uint64_t value) + { + if (offset % sizeof(boost::uint64_t) != 0) throw uhd::value_error("poke64: Incorrect address alignment"); + poke32(offset, static_cast<boost::uint32_t>(value)); + poke32(offset + 4, static_cast<boost::uint32_t>(value >> 32)); + } + + boost::uint64_t peek64(const wb_addr_type offset) + { + if (offset % sizeof(boost::uint64_t) != 0) throw uhd::value_error("peek64: Incorrect address alignment"); + + boost::unique_lock<boost::mutex> lock(_mutex); + _iface->poke32(REG_USER_RB_ADDR, offset >> 3); //Translate byte offset to 64-bit offset + return _iface->peek64(_rb_reg_addr); + } + + void poke32(const wb_addr_type offset, const boost::uint32_t value) + { + if (offset % sizeof(boost::uint32_t) != 0) throw uhd::value_error("poke32: Incorrect address alignment"); + + boost::unique_lock<boost::mutex> lock(_mutex); + _iface->poke32(REG_USER_SR_ADDR, offset >> 2); //Translate byte offset to 64-bit offset + _iface->poke32(REG_USER_SR_DATA, value); + } + + boost::uint32_t peek32(const wb_addr_type offset) + { + if (offset % sizeof(boost::uint32_t) != 0) throw uhd::value_error("peek32: Incorrect address alignment"); + + boost::uint64_t value = peek64((offset >> 3) << 3); + if ((offset & 0x7) == 0) { + return static_cast<boost::uint32_t>(value); + } else { + return static_cast<boost::uint32_t>(value >> 32); + } + } + +private: + wb_iface::sptr _iface; + const wb_addr_type _sr_base_addr; + const wb_addr_type _rb_reg_addr; + boost::mutex _mutex; +}; + +wb_iface::sptr user_settings_core_3000::make(wb_iface::sptr iface, + const wb_addr_type sr_base_addr, const wb_addr_type rb_reg_addr) +{ + return sptr(new user_settings_core_3000_impl(iface, sr_base_addr, rb_reg_addr)); +} diff --git a/host/lib/usrp/cores/user_settings_core_3000.hpp b/host/lib/usrp/cores/user_settings_core_3000.hpp new file mode 100644 index 000000000..6891b9e81 --- /dev/null +++ b/host/lib/usrp/cores/user_settings_core_3000.hpp @@ -0,0 +1,35 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_LIBUHD_USRP_USER_SETTINGS_CORE_3000_HPP +#define INCLUDED_LIBUHD_USRP_USER_SETTINGS_CORE_3000_HPP + +#include <uhd/config.hpp> +#include <boost/utility.hpp> +#include <boost/shared_ptr.hpp> +#include <uhd/types/wb_iface.hpp> + +class user_settings_core_3000 : public uhd::wb_iface { +public: + virtual ~user_settings_core_3000() {} + + static sptr make( + wb_iface::sptr iface, + const wb_addr_type sr_base_addr, const wb_addr_type rb_reg_addr); +}; + +#endif /* INCLUDED_LIBUHD_USRP_USER_SETTINGS_CORE_3000_HPP */ diff --git a/host/lib/usrp/dboard/db_basic_and_lf.cpp b/host/lib/usrp/dboard/db_basic_and_lf.cpp index 2b30dab52..941a80ea4 100644 --- a/host/lib/usrp/dboard/db_basic_and_lf.cpp +++ b/host/lib/usrp/dboard/db_basic_and_lf.cpp @@ -50,7 +50,7 @@ static const uhd::dict<std::string, double> subdev_bandwidth_scalar = map_list_o class basic_rx : public rx_dboard_base{ public: basic_rx(ctor_args_t args, double max_freq); - ~basic_rx(void); + virtual ~basic_rx(void); private: double _max_freq; @@ -59,7 +59,7 @@ private: class basic_tx : public tx_dboard_base{ public: basic_tx(ctor_args_t args, double max_freq); - ~basic_tx(void); + virtual ~basic_tx(void); private: double _max_freq; @@ -121,7 +121,7 @@ basic_rx::basic_rx(ctor_args_t args, double max_freq) : rx_dboard_base(args){ this->get_rx_subtree()->create<int>("gains"); //phony property so this dir exists this->get_rx_subtree()->create<double>("freq/value") - .publish(&always_zero_freq); + .set_publisher(&always_zero_freq); this->get_rx_subtree()->create<meta_range_t>("freq/range") .set(freq_range_t(-_max_freq, +_max_freq)); this->get_rx_subtree()->create<std::string>("antenna/value") @@ -176,7 +176,7 @@ basic_tx::basic_tx(ctor_args_t args, double max_freq) : tx_dboard_base(args){ this->get_tx_subtree()->create<int>("gains"); //phony property so this dir exists this->get_tx_subtree()->create<double>("freq/value") - .publish(&always_zero_freq); + .set_publisher(&always_zero_freq); this->get_tx_subtree()->create<meta_range_t>("freq/range") .set(freq_range_t(-_max_freq, +_max_freq)); this->get_tx_subtree()->create<std::string>("antenna/value") diff --git a/host/lib/usrp/dboard/db_dbsrx.cpp b/host/lib/usrp/dboard/db_dbsrx.cpp index 9d04d8e16..6e1846fb8 100644 --- a/host/lib/usrp/dboard/db_dbsrx.cpp +++ b/host/lib/usrp/dboard/db_dbsrx.cpp @@ -66,7 +66,7 @@ static const double usrp1_gpio_clock_rate_limit = 4e6; class dbsrx : public rx_dboard_base{ public: dbsrx(ctor_args_t args); - ~dbsrx(void); + virtual ~dbsrx(void); private: double _lo_freq; @@ -204,16 +204,16 @@ dbsrx::dbsrx(ctor_args_t args) : rx_dboard_base(args){ this->get_rx_subtree()->create<std::string>("name") .set("DBSRX"); this->get_rx_subtree()->create<sensor_value_t>("sensors/lo_locked") - .publish(boost::bind(&dbsrx::get_locked, this)); + .set_publisher(boost::bind(&dbsrx::get_locked, this)); BOOST_FOREACH(const std::string &name, dbsrx_gain_ranges.keys()){ this->get_rx_subtree()->create<double>("gains/"+name+"/value") - .coerce(boost::bind(&dbsrx::set_gain, this, _1, name)) + .set_coercer(boost::bind(&dbsrx::set_gain, this, _1, name)) .set(dbsrx_gain_ranges[name].start()); this->get_rx_subtree()->create<meta_range_t>("gains/"+name+"/range") .set(dbsrx_gain_ranges[name]); } this->get_rx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&dbsrx::set_lo_freq, this, _1)); + .set_coercer(boost::bind(&dbsrx::set_lo_freq, this, _1)); this->get_rx_subtree()->create<meta_range_t>("freq/range") .set(dbsrx_freq_range); this->get_rx_subtree()->create<std::string>("antenna/value") @@ -227,7 +227,7 @@ dbsrx::dbsrx(ctor_args_t args) : rx_dboard_base(args){ this->get_rx_subtree()->create<bool>("use_lo_offset") .set(false); this->get_rx_subtree()->create<double>("bandwidth/value") - .coerce(boost::bind(&dbsrx::set_bandwidth, this, _1)); + .set_coercer(boost::bind(&dbsrx::set_bandwidth, this, _1)); this->get_rx_subtree()->create<meta_range_t>("bandwidth/range") .set(dbsrx_bandwidth_range); diff --git a/host/lib/usrp/dboard/db_dbsrx2.cpp b/host/lib/usrp/dboard/db_dbsrx2.cpp index 1debe3c8f..11d706ed6 100644 --- a/host/lib/usrp/dboard/db_dbsrx2.cpp +++ b/host/lib/usrp/dboard/db_dbsrx2.cpp @@ -60,7 +60,7 @@ static const uhd::dict<std::string, gain_range_t> dbsrx2_gain_ranges = map_list_ class dbsrx2 : public rx_dboard_base{ public: dbsrx2(ctor_args_t args); - ~dbsrx2(void); + virtual ~dbsrx2(void); private: double _lo_freq; @@ -191,16 +191,16 @@ dbsrx2::dbsrx2(ctor_args_t args) : rx_dboard_base(args){ this->get_rx_subtree()->create<std::string>("name") .set("DBSRX2"); this->get_rx_subtree()->create<sensor_value_t>("sensors/lo_locked") - .publish(boost::bind(&dbsrx2::get_locked, this)); + .set_publisher(boost::bind(&dbsrx2::get_locked, this)); BOOST_FOREACH(const std::string &name, dbsrx2_gain_ranges.keys()){ this->get_rx_subtree()->create<double>("gains/"+name+"/value") - .coerce(boost::bind(&dbsrx2::set_gain, this, _1, name)) + .set_coercer(boost::bind(&dbsrx2::set_gain, this, _1, name)) .set(dbsrx2_gain_ranges[name].start()); this->get_rx_subtree()->create<meta_range_t>("gains/"+name+"/range") .set(dbsrx2_gain_ranges[name]); } this->get_rx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&dbsrx2::set_lo_freq, this, _1)) + .set_coercer(boost::bind(&dbsrx2::set_lo_freq, this, _1)) .set(dbsrx2_freq_range.start()); this->get_rx_subtree()->create<meta_range_t>("freq/range") .set(dbsrx2_freq_range); @@ -218,7 +218,7 @@ dbsrx2::dbsrx2(ctor_args_t args) : rx_dboard_base(args){ double codec_rate = this->get_iface()->get_codec_rate(dboard_iface::UNIT_RX); this->get_rx_subtree()->create<double>("bandwidth/value") - .coerce(boost::bind(&dbsrx2::set_bandwidth, this, _1)) + .set_coercer(boost::bind(&dbsrx2::set_bandwidth, this, _1)) .set(2.0*(0.8*codec_rate/2.0)); //bandwidth in lowpass, convert to complex bandpass //default to anti-alias at different codec_rate this->get_rx_subtree()->create<meta_range_t>("bandwidth/range") diff --git a/host/lib/usrp/dboard/db_e3x0.cpp b/host/lib/usrp/dboard/db_e3x0.cpp index 523927d49..c7cc52d73 100644 --- a/host/lib/usrp/dboard/db_e3x0.cpp +++ b/host/lib/usrp/dboard/db_e3x0.cpp @@ -29,7 +29,7 @@ class e310_dboard : public xcvr_dboard_base{ public: e310_dboard(ctor_args_t args) : xcvr_dboard_base(args) {} - ~e310_dboard(void) {} + virtual ~e310_dboard(void) {} }; /*********************************************************************** @@ -40,7 +40,7 @@ class e300_dboard : public xcvr_dboard_base{ public: e300_dboard(ctor_args_t args) : xcvr_dboard_base(args) {} - ~e300_dboard(void) {} + virtual ~e300_dboard(void) {} }; /*********************************************************************** diff --git a/host/lib/usrp/dboard/db_rfx.cpp b/host/lib/usrp/dboard/db_rfx.cpp index 1342c913d..dbb1600ec 100644 --- a/host/lib/usrp/dboard/db_rfx.cpp +++ b/host/lib/usrp/dboard/db_rfx.cpp @@ -78,7 +78,7 @@ public: const freq_range_t &freq_range, bool rx_div2, bool tx_div2 ); - ~rfx_xcvr(void); + virtual ~rfx_xcvr(void); private: const freq_range_t _freq_range; @@ -183,20 +183,20 @@ rfx_xcvr::rfx_xcvr( else this->get_rx_subtree()->create<std::string>("name").set("RFX RX"); this->get_rx_subtree()->create<sensor_value_t>("sensors/lo_locked") - .publish(boost::bind(&rfx_xcvr::get_locked, this, dboard_iface::UNIT_RX)); + .set_publisher(boost::bind(&rfx_xcvr::get_locked, this, dboard_iface::UNIT_RX)); BOOST_FOREACH(const std::string &name, _rx_gain_ranges.keys()){ this->get_rx_subtree()->create<double>("gains/"+name+"/value") - .coerce(boost::bind(&rfx_xcvr::set_rx_gain, this, _1, name)) + .set_coercer(boost::bind(&rfx_xcvr::set_rx_gain, this, _1, name)) .set(_rx_gain_ranges[name].start()); this->get_rx_subtree()->create<meta_range_t>("gains/"+name+"/range") .set(_rx_gain_ranges[name]); } this->get_rx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&rfx_xcvr::set_lo_freq, this, dboard_iface::UNIT_RX, _1)) + .set_coercer(boost::bind(&rfx_xcvr::set_lo_freq, this, dboard_iface::UNIT_RX, _1)) .set((_freq_range.start() + _freq_range.stop())/2.0); this->get_rx_subtree()->create<meta_range_t>("freq/range").set(_freq_range); this->get_rx_subtree()->create<std::string>("antenna/value") - .subscribe(boost::bind(&rfx_xcvr::set_rx_ant, this, _1)) + .add_coerced_subscriber(boost::bind(&rfx_xcvr::set_rx_ant, this, _1)) .set("RX2"); this->get_rx_subtree()->create<std::vector<std::string> >("antenna/options") .set(rfx_rx_antennas); @@ -219,14 +219,14 @@ rfx_xcvr::rfx_xcvr( else this->get_tx_subtree()->create<std::string>("name").set("RFX TX"); this->get_tx_subtree()->create<sensor_value_t>("sensors/lo_locked") - .publish(boost::bind(&rfx_xcvr::get_locked, this, dboard_iface::UNIT_TX)); + .set_publisher(boost::bind(&rfx_xcvr::get_locked, this, dboard_iface::UNIT_TX)); this->get_tx_subtree()->create<int>("gains"); //phony property so this dir exists this->get_tx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&rfx_xcvr::set_lo_freq, this, dboard_iface::UNIT_TX, _1)) + .set_coercer(boost::bind(&rfx_xcvr::set_lo_freq, this, dboard_iface::UNIT_TX, _1)) .set((_freq_range.start() + _freq_range.stop())/2.0); this->get_tx_subtree()->create<meta_range_t>("freq/range").set(_freq_range); this->get_tx_subtree()->create<std::string>("antenna/value") - .subscribe(boost::bind(&rfx_xcvr::set_tx_ant, this, _1)).set(rfx_tx_antennas.at(0)); + .add_coerced_subscriber(boost::bind(&rfx_xcvr::set_tx_ant, this, _1)).set(rfx_tx_antennas.at(0)); this->get_tx_subtree()->create<std::vector<std::string> >("antenna/options") .set(rfx_tx_antennas); this->get_tx_subtree()->create<std::string>("connection").set("IQ"); @@ -248,15 +248,15 @@ rfx_xcvr::rfx_xcvr( this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, output_enables); //setup the tx atr (this does not change with antenna) - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, _power_up | ANT_XX | MIXER_DIS); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, _power_up | ANT_RX | MIXER_DIS); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_TX | MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE, _power_up | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY, _power_up | ANT_RX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_TX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB); //setup the rx atr (this does not change with antenna) - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, _power_up | ANT_XX | MIXER_DIS); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_XX | MIXER_DIS); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, _power_up | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB); } rfx_xcvr::~rfx_xcvr(void){ @@ -272,14 +272,14 @@ void rfx_xcvr::set_rx_ant(const std::string &ant){ //set the rx atr regs that change with antenna setting if (ant == "CAL") { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_TXRX | MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_TXRX | MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, _power_up | MIXER_ENB | ANT_TXRX ); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_TXRX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_TXRX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, _power_up | MIXER_ENB | ANT_TXRX ); } else { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_XX | MIXER_DIS); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, _power_up | MIXER_ENB | + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_XX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, _power_up | MIXER_ENB | ((ant == "TX/RX")? ANT_TXRX : ANT_RX2)); } @@ -292,12 +292,12 @@ void rfx_xcvr::set_tx_ant(const std::string &ant){ //set the tx atr regs that change with antenna setting if (ant == "CAL") { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_RX | MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_RX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX | MIXER_ENB); } else { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_TX | MIXER_ENB); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, _power_up | ANT_TX | MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB); } } diff --git a/host/lib/usrp/dboard/db_sbx_common.cpp b/host/lib/usrp/dboard/db_sbx_common.cpp index ce5166c4c..be02cf77a 100644 --- a/host/lib/usrp/dboard/db_sbx_common.cpp +++ b/host/lib/usrp/dboard/db_sbx_common.cpp @@ -159,20 +159,20 @@ sbx_xcvr::sbx_xcvr(ctor_args_t args) : xcvr_dboard_base(args){ else this->get_rx_subtree()->create<std::string>("name").set("SBX/CBX RX"); this->get_rx_subtree()->create<sensor_value_t>("sensors/lo_locked") - .publish(boost::bind(&sbx_xcvr::get_locked, this, dboard_iface::UNIT_RX)); + .set_publisher(boost::bind(&sbx_xcvr::get_locked, this, dboard_iface::UNIT_RX)); BOOST_FOREACH(const std::string &name, sbx_rx_gain_ranges.keys()){ this->get_rx_subtree()->create<double>("gains/"+name+"/value") - .coerce(boost::bind(&sbx_xcvr::set_rx_gain, this, _1, name)) + .set_coercer(boost::bind(&sbx_xcvr::set_rx_gain, this, _1, name)) .set(sbx_rx_gain_ranges[name].start()); this->get_rx_subtree()->create<meta_range_t>("gains/"+name+"/range") .set(sbx_rx_gain_ranges[name]); } this->get_rx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&sbx_xcvr::set_lo_freq, this, dboard_iface::UNIT_RX, _1)) + .set_coercer(boost::bind(&sbx_xcvr::set_lo_freq, this, dboard_iface::UNIT_RX, _1)) .set((freq_range.start() + freq_range.stop())/2.0); this->get_rx_subtree()->create<meta_range_t>("freq/range").set(freq_range); this->get_rx_subtree()->create<std::string>("antenna/value") - .subscribe(boost::bind(&sbx_xcvr::set_rx_ant, this, _1)) + .add_coerced_subscriber(boost::bind(&sbx_xcvr::set_rx_ant, this, _1)) .set("RX2"); this->get_rx_subtree()->create<std::vector<std::string> >("antenna/options") .set(sbx_rx_antennas); @@ -200,20 +200,20 @@ sbx_xcvr::sbx_xcvr(ctor_args_t args) : xcvr_dboard_base(args){ else this->get_tx_subtree()->create<std::string>("name").set("SBX/CBX TX"); this->get_tx_subtree()->create<sensor_value_t>("sensors/lo_locked") - .publish(boost::bind(&sbx_xcvr::get_locked, this, dboard_iface::UNIT_TX)); + .set_publisher(boost::bind(&sbx_xcvr::get_locked, this, dboard_iface::UNIT_TX)); BOOST_FOREACH(const std::string &name, sbx_tx_gain_ranges.keys()){ this->get_tx_subtree()->create<double>("gains/"+name+"/value") - .coerce(boost::bind(&sbx_xcvr::set_tx_gain, this, _1, name)) + .set_coercer(boost::bind(&sbx_xcvr::set_tx_gain, this, _1, name)) .set(sbx_tx_gain_ranges[name].start()); this->get_tx_subtree()->create<meta_range_t>("gains/"+name+"/range") .set(sbx_tx_gain_ranges[name]); } this->get_tx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&sbx_xcvr::set_lo_freq, this, dboard_iface::UNIT_TX, _1)) + .set_coercer(boost::bind(&sbx_xcvr::set_lo_freq, this, dboard_iface::UNIT_TX, _1)) .set((freq_range.start() + freq_range.stop())/2.0); this->get_tx_subtree()->create<meta_range_t>("freq/range").set(freq_range); this->get_tx_subtree()->create<std::string>("antenna/value") - .subscribe(boost::bind(&sbx_xcvr::set_tx_ant, this, _1)) + .add_coerced_subscriber(boost::bind(&sbx_xcvr::set_tx_ant, this, _1)) .set(sbx_tx_antennas.at(0)); this->get_tx_subtree()->create<std::vector<std::string> >("antenna/options") .set(sbx_tx_antennas); @@ -237,8 +237,8 @@ sbx_xcvr::sbx_xcvr(ctor_args_t args) : xcvr_dboard_base(args){ this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, (TXIO_MASK|TX_LED_IO)); this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO)); - //flash LEDs - flash_leds(); + //Initialize ATR registers after direction and pin ctrl configuration + update_atr(); UHD_LOGV(often) << boost::format( "SBX GPIO Direction: RX: 0x%08x, TX: 0x%08x" @@ -265,39 +265,39 @@ void sbx_xcvr::update_atr(void){ //setup the tx atr (this does not change with antenna) this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_IDLE, 0 | tx_lo_lpf_en \ + gpio_atr::ATR_REG_IDLE, 0 | tx_lo_lpf_en \ | tx_ld_led | tx_ant_led | TX_POWER_UP | ANT_XX | TX_MIXER_DIS); //setup the rx atr (this does not change with antenna) this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_IDLE, rx_pga0_iobits | rx_lo_lpf_en \ + gpio_atr::ATR_REG_IDLE, rx_pga0_iobits | rx_lo_lpf_en \ | rx_ld_led | rx_ant_led | RX_POWER_UP | ANT_XX | RX_MIXER_DIS); //set the RX atr regs that change with antenna setting this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_RX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \ + gpio_atr::ATR_REG_RX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \ | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB \ | ((_rx_ant != "RX2")? ANT_TXRX : ANT_RX2)); this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_TX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \ + gpio_atr::ATR_REG_TX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \ | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_DIS \ | ((_rx_ant == "CAL")? ANT_TXRX : ANT_RX2)); this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_FULL_DUPLEX, rx_pga0_iobits | rx_lo_lpf_en \ + gpio_atr::ATR_REG_FULL_DUPLEX, rx_pga0_iobits | rx_lo_lpf_en \ | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB \ | ((_rx_ant == "CAL")? ANT_TXRX : ANT_RX2)); //set the TX atr regs that change with antenna setting this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_RX_ONLY, 0 | tx_lo_lpf_en \ + gpio_atr::ATR_REG_RX_ONLY, 0 | tx_lo_lpf_en \ | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_DIS \ | ((_rx_ant != "RX2")? ANT_RX : ANT_TX)); this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_TX_ONLY, tx_pga0_iobits | tx_lo_lpf_en \ + gpio_atr::ATR_REG_TX_ONLY, tx_pga0_iobits | tx_lo_lpf_en \ | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_ENB \ | ((_tx_ant == "CAL")? ANT_RX : ANT_TX)); this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_FULL_DUPLEX, tx_pga0_iobits | tx_lo_lpf_en \ + gpio_atr::ATR_REG_FULL_DUPLEX, tx_pga0_iobits | tx_lo_lpf_en \ | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_ENB \ | ((_tx_ant == "CAL")? ANT_RX : ANT_TX)); } @@ -352,45 +352,3 @@ sensor_value_t sbx_xcvr::get_locked(dboard_iface::unit_t unit) { return sensor_value_t("LO", locked, "locked", "unlocked"); } - - -void sbx_xcvr::flash_leds(void) { - //Remove LED gpios from ATR control temporarily and set to outputs - this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_TX, TXIO_MASK); - this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, RXIO_MASK); - this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, (TXIO_MASK|RX_LED_IO)); - this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_LD, TX_LED_IO); - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, \ - TX_LED_TXRX|TX_LED_LD, TX_LED_IO); - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_LD, RX_LED_IO); - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, \ - RX_LED_RX1RX2|RX_LED_LD, RX_LED_IO); - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_LD, RX_LED_IO); - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, 0, RX_LED_IO); - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_LD, TX_LED_IO); - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, 0, TX_LED_IO); - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); - - //Put LED gpios back in ATR control and update atr - this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_TX, (TXIO_MASK|TX_LED_IO)); - this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO)); - this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, (TXIO_MASK|TX_LED_IO)); - this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO)); -} - diff --git a/host/lib/usrp/dboard/db_sbx_common.hpp b/host/lib/usrp/dboard/db_sbx_common.hpp index 4800bbd83..c0e29f263 100644 --- a/host/lib/usrp/dboard/db_sbx_common.hpp +++ b/host/lib/usrp/dboard/db_sbx_common.hpp @@ -16,10 +16,15 @@ // #include <uhd/types/device_addr.hpp> - -#include "adf435x_common.hpp" +#include "adf435x.hpp" #include "max287x.hpp" +// LO Related +#define ADF435X_CE (1 << 3) +#define ADF435X_PDBRF (1 << 2) +#define ADF435X_MUXOUT (1 << 1) // INPUT!!! +#define LOCKDET_MASK (1 << 0) // INPUT!!! + // Common IO Pins #define LO_LPF_EN (1 << 15) @@ -36,6 +41,8 @@ #define RX_LED_LD (1 << 6) // LED for RX Lock Detect #define DIS_POWER_RX (1 << 5) // on UNIT_RX, 0 powers up RX #define RX_DISABLE (1 << 4) // on UNIT_RX, 1 disables RX Mixer and Baseband +#define RX_ATTN_SHIFT 8 //lsb of RX Attenuator Control +#define RX_ATTN_MASK (63 << RX_ATTN_SHIFT) //valid bits of RX Attenuator Control // TX Attenuator Pins #define TX_ATTN_SHIFT 8 // lsb of TX Attenuator Control @@ -184,12 +191,16 @@ protected: class sbx_version3 : public sbx_versionx { public: sbx_version3(sbx_xcvr *_self_sbx_xcvr); - ~sbx_version3(void); + virtual ~sbx_version3(void); double set_lo_freq(dboard_iface::unit_t unit, double target_freq); /*! This is the registered instance of the wrapper class, sbx_base. */ sbx_xcvr *self_base; + private: + adf435x_iface::sptr _txlo; + adf435x_iface::sptr _rxlo; + void write_lo_regs(dboard_iface::unit_t unit, const std::vector<boost::uint32_t> ®s); }; /*! @@ -200,12 +211,16 @@ protected: class sbx_version4 : public sbx_versionx { public: sbx_version4(sbx_xcvr *_self_sbx_xcvr); - ~sbx_version4(void); + virtual ~sbx_version4(void); double set_lo_freq(dboard_iface::unit_t unit, double target_freq); /*! This is the registered instance of the wrapper class, sbx_base. */ sbx_xcvr *self_base; + private: + adf435x_iface::sptr _txlo; + adf435x_iface::sptr _rxlo; + void write_lo_regs(dboard_iface::unit_t unit, const std::vector<boost::uint32_t> ®s); }; /*! @@ -218,7 +233,7 @@ protected: class cbx : public sbx_versionx { public: cbx(sbx_xcvr *_self_sbx_xcvr); - ~cbx(void); + virtual ~cbx(void); double set_lo_freq(dboard_iface::unit_t unit, double target_freq); diff --git a/host/lib/usrp/dboard/db_sbx_version3.cpp b/host/lib/usrp/dboard/db_sbx_version3.cpp index b848097d1..76ad7b04f 100644 --- a/host/lib/usrp/dboard/db_sbx_version3.cpp +++ b/host/lib/usrp/dboard/db_sbx_version3.cpp @@ -16,9 +16,7 @@ // -#include "adf4350_regs.hpp" #include "db_sbx_common.hpp" -#include "../common/adf435x_common.hpp" #include <uhd/types/tune_request.hpp> #include <boost/algorithm/string.hpp> @@ -32,12 +30,21 @@ using namespace boost::assign; sbx_xcvr::sbx_version3::sbx_version3(sbx_xcvr *_self_sbx_xcvr) { //register the handle to our base SBX class self_base = _self_sbx_xcvr; + _txlo = adf435x_iface::make_adf4350(boost::bind(&sbx_xcvr::sbx_version3::write_lo_regs, this, dboard_iface::UNIT_TX, _1)); + _rxlo = adf435x_iface::make_adf4350(boost::bind(&sbx_xcvr::sbx_version3::write_lo_regs, this, dboard_iface::UNIT_RX, _1)); } sbx_xcvr::sbx_version3::~sbx_version3(void){ /* NOP */ } +void sbx_xcvr::sbx_version3::write_lo_regs(dboard_iface::unit_t unit, const std::vector<boost::uint32_t> ®s) +{ + BOOST_FOREACH(boost::uint32_t reg, regs) + { + self_base->get_iface()->write_spi(unit, spi_config_t::EDGE_RISE, reg, 32); + } +} /*********************************************************************** * Tuning @@ -57,95 +64,27 @@ double sbx_xcvr::sbx_version3::set_lo_freq(dboard_iface::unit_t unit, double tar device_addr_t tune_args = subtree->access<device_addr_t>("tune_args").get(); bool is_int_n = boost::iequals(tune_args.get("mode_n",""), "integer"); - //clip the input - target_freq = sbx_freq_range.clip(target_freq); - - //map prescaler setting to mininmum integer divider (N) values (pg.18 prescaler) - static const uhd::dict<int, int> prescaler_to_min_int_div = map_list_of - (0,23) //adf4350_regs_t::PRESCALER_4_5 - (1,75) //adf4350_regs_t::PRESCALER_8_9 - ; - - //map rf divider select output dividers to enums - static const uhd::dict<int, adf4350_regs_t::rf_divider_select_t> rfdivsel_to_enum = map_list_of - (1, adf4350_regs_t::RF_DIVIDER_SELECT_DIV1) - (2, adf4350_regs_t::RF_DIVIDER_SELECT_DIV2) - (4, adf4350_regs_t::RF_DIVIDER_SELECT_DIV4) - (8, adf4350_regs_t::RF_DIVIDER_SELECT_DIV8) - (16, adf4350_regs_t::RF_DIVIDER_SELECT_DIV16) - ; - - //use 8/9 prescaler for vco_freq > 3 GHz (pg.18 prescaler) - adf4350_regs_t::prescaler_t prescaler = target_freq > 3e9 ? adf4350_regs_t::PRESCALER_8_9 : adf4350_regs_t::PRESCALER_4_5; - - adf435x_tuning_constraints tuning_constraints; - tuning_constraints.force_frac0 = is_int_n; - tuning_constraints.band_sel_freq_max = 100e3; - tuning_constraints.ref_doubler_threshold = 12.5e6; - tuning_constraints.int_range = uhd::range_t(prescaler_to_min_int_div[prescaler], 4095); //INT is a 12-bit field - tuning_constraints.pfd_freq_max = 25e6; - tuning_constraints.rf_divider_range = uhd::range_t(1, 16); - tuning_constraints.feedback_after_divider = true; + //Select the LO + adf435x_iface::sptr& lo_iface = unit == dboard_iface::UNIT_RX ? _rxlo : _txlo; + lo_iface->set_feedback_select(adf435x_iface::FB_SEL_DIVIDED); + lo_iface->set_reference_freq(self_base->get_iface()->get_clock_rate(unit)); - double actual_freq; - adf435x_tuning_settings tuning_settings = tune_adf435x_synth( - target_freq, self_base->get_iface()->get_clock_rate(unit), - tuning_constraints, actual_freq); + //Use 8/9 prescaler for vco_freq > 3 GHz (pg.18 prescaler) + lo_iface->set_prescaler(target_freq > 3e9 ? adf435x_iface::PRESCALER_8_9 : adf435x_iface::PRESCALER_4_5); - //load the register values - adf4350_regs_t regs; + //Configure the LO + double actual_freq = 0.0; + actual_freq = lo_iface->set_frequency(sbx_freq_range.clip(target_freq), is_int_n); - if ((unit == dboard_iface::UNIT_TX) and (actual_freq == sbx_tx_lo_2dbm.clip(actual_freq))) - regs.output_power = adf4350_regs_t::OUTPUT_POWER_2DBM; - else - regs.output_power = adf4350_regs_t::OUTPUT_POWER_5DBM; - - regs.frac_12_bit = tuning_settings.frac_12_bit; - regs.int_16_bit = tuning_settings.int_16_bit; - regs.mod_12_bit = tuning_settings.mod_12_bit; - regs.clock_divider_12_bit = tuning_settings.clock_divider_12_bit; - regs.feedback_select = tuning_constraints.feedback_after_divider ? - adf4350_regs_t::FEEDBACK_SELECT_DIVIDED : - adf4350_regs_t::FEEDBACK_SELECT_FUNDAMENTAL; - regs.clock_div_mode = adf4350_regs_t::CLOCK_DIV_MODE_RESYNC_ENABLE; - regs.prescaler = prescaler; - regs.r_counter_10_bit = tuning_settings.r_counter_10_bit; - regs.reference_divide_by_2 = tuning_settings.r_divide_by_2_en ? - adf4350_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED : - adf4350_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED; - regs.reference_doubler = tuning_settings.r_doubler_en ? - adf4350_regs_t::REFERENCE_DOUBLER_ENABLED : - adf4350_regs_t::REFERENCE_DOUBLER_DISABLED; - regs.band_select_clock_div = tuning_settings.band_select_clock_div; - UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(tuning_settings.rf_divider)); - regs.rf_divider_select = rfdivsel_to_enum[tuning_settings.rf_divider]; - regs.ldf = is_int_n ? - adf4350_regs_t::LDF_INT_N : - adf4350_regs_t::LDF_FRAC_N; - - //reset the N and R counter - regs.counter_reset = adf4350_regs_t::COUNTER_RESET_ENABLED; - self_base->get_iface()->write_spi(unit, spi_config_t::EDGE_RISE, regs.get_reg(2), 32); - regs.counter_reset = adf4350_regs_t::COUNTER_RESET_DISABLED; - - //write the registers - //correct power-up sequence to write registers (5, 4, 3, 2, 1, 0) - int addr; - - for(addr=5; addr>=0; addr--){ - UHD_LOGV(often) << boost::format( - "SBX SPI Reg (0x%02x): 0x%08x" - ) % addr % regs.get_reg(addr) << std::endl; - self_base->get_iface()->write_spi( - unit, spi_config_t::EDGE_RISE, - regs.get_reg(addr), 32 - ); + if ((unit == dboard_iface::UNIT_TX) and (actual_freq == sbx_tx_lo_2dbm.clip(actual_freq))) { + lo_iface->set_output_power(adf435x_iface::OUTPUT_POWER_2DBM); + } else { + lo_iface->set_output_power(adf435x_iface::OUTPUT_POWER_5DBM); } - //return the actual frequency - UHD_LOGV(often) << boost::format( - "SBX tune: actual frequency %f MHz" - ) % (actual_freq/1e6) << std::endl; + //Write to hardware + lo_iface->commit(); + return actual_freq; } diff --git a/host/lib/usrp/dboard/db_sbx_version4.cpp b/host/lib/usrp/dboard/db_sbx_version4.cpp index 8f7e747bc..639bce250 100644 --- a/host/lib/usrp/dboard/db_sbx_version4.cpp +++ b/host/lib/usrp/dboard/db_sbx_version4.cpp @@ -16,9 +16,7 @@ // -#include "adf4351_regs.hpp" #include "db_sbx_common.hpp" -#include "../common/adf435x_common.hpp" #include <uhd/types/tune_request.hpp> #include <boost/algorithm/string.hpp> @@ -32,6 +30,8 @@ using namespace boost::assign; sbx_xcvr::sbx_version4::sbx_version4(sbx_xcvr *_self_sbx_xcvr) { //register the handle to our base SBX class self_base = _self_sbx_xcvr; + _txlo = adf435x_iface::make_adf4351(boost::bind(&sbx_xcvr::sbx_version4::write_lo_regs, this, dboard_iface::UNIT_TX, _1)); + _rxlo = adf435x_iface::make_adf4351(boost::bind(&sbx_xcvr::sbx_version4::write_lo_regs, this, dboard_iface::UNIT_RX, _1)); } @@ -39,6 +39,14 @@ sbx_xcvr::sbx_version4::~sbx_version4(void){ /* NOP */ } +void sbx_xcvr::sbx_version4::write_lo_regs(dboard_iface::unit_t unit, const std::vector<boost::uint32_t> ®s) +{ + BOOST_FOREACH(boost::uint32_t reg, regs) + { + self_base->get_iface()->write_spi(unit, spi_config_t::EDGE_RISE, reg, 32); + } +} + /*********************************************************************** * Tuning @@ -58,99 +66,27 @@ double sbx_xcvr::sbx_version4::set_lo_freq(dboard_iface::unit_t unit, double tar device_addr_t tune_args = subtree->access<device_addr_t>("tune_args").get(); bool is_int_n = boost::iequals(tune_args.get("mode_n",""), "integer"); - //clip the input - target_freq = sbx_freq_range.clip(target_freq); - - //map prescaler setting to mininmum integer divider (N) values (pg.18 prescaler) - static const uhd::dict<int, int> prescaler_to_min_int_div = map_list_of - (0,23) //adf4351_regs_t::PRESCALER_4_5 - (1,75) //adf4351_regs_t::PRESCALER_8_9 - ; - - //map rf divider select output dividers to enums - static const uhd::dict<int, adf4351_regs_t::rf_divider_select_t> rfdivsel_to_enum = map_list_of - (1, adf4351_regs_t::RF_DIVIDER_SELECT_DIV1) - (2, adf4351_regs_t::RF_DIVIDER_SELECT_DIV2) - (4, adf4351_regs_t::RF_DIVIDER_SELECT_DIV4) - (8, adf4351_regs_t::RF_DIVIDER_SELECT_DIV8) - (16, adf4351_regs_t::RF_DIVIDER_SELECT_DIV16) - (32, adf4351_regs_t::RF_DIVIDER_SELECT_DIV32) - (64, adf4351_regs_t::RF_DIVIDER_SELECT_DIV64) - ; - - //use 8/9 prescaler for vco_freq > 3 GHz (pg.18 prescaler) - adf4351_regs_t::prescaler_t prescaler = target_freq > 3.6e9 ? adf4351_regs_t::PRESCALER_8_9 : adf4351_regs_t::PRESCALER_4_5; - - adf435x_tuning_constraints tuning_constraints; - tuning_constraints.force_frac0 = is_int_n; - tuning_constraints.band_sel_freq_max = 100e3; - tuning_constraints.ref_doubler_threshold = 12.5e6; - tuning_constraints.int_range = uhd::range_t(prescaler_to_min_int_div[prescaler], 4095); //INT is a 12-bit field - tuning_constraints.pfd_freq_max = 25e6; - tuning_constraints.rf_divider_range = uhd::range_t(1, 64); - tuning_constraints.feedback_after_divider = true; - - double actual_freq; - adf435x_tuning_settings tuning_settings = tune_adf435x_synth( - target_freq, self_base->get_iface()->get_clock_rate(unit), - tuning_constraints, actual_freq); - - //load the register values - adf4351_regs_t regs; - - if ((unit == dboard_iface::UNIT_TX) and (actual_freq == sbx_tx_lo_2dbm.clip(actual_freq))) - regs.output_power = adf4351_regs_t::OUTPUT_POWER_2DBM; - else - regs.output_power = adf4351_regs_t::OUTPUT_POWER_5DBM; - - regs.frac_12_bit = tuning_settings.frac_12_bit; - regs.int_16_bit = tuning_settings.int_16_bit; - regs.mod_12_bit = tuning_settings.mod_12_bit; - regs.clock_divider_12_bit = tuning_settings.clock_divider_12_bit; - regs.feedback_select = tuning_constraints.feedback_after_divider ? - adf4351_regs_t::FEEDBACK_SELECT_DIVIDED : - adf4351_regs_t::FEEDBACK_SELECT_FUNDAMENTAL; - regs.clock_div_mode = adf4351_regs_t::CLOCK_DIV_MODE_RESYNC_ENABLE; - regs.prescaler = prescaler; - regs.r_counter_10_bit = tuning_settings.r_counter_10_bit; - regs.reference_divide_by_2 = tuning_settings.r_divide_by_2_en ? - adf4351_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED : - adf4351_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED; - regs.reference_doubler = tuning_settings.r_doubler_en ? - adf4351_regs_t::REFERENCE_DOUBLER_ENABLED : - adf4351_regs_t::REFERENCE_DOUBLER_DISABLED; - regs.band_select_clock_div = tuning_settings.band_select_clock_div; - UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(tuning_settings.rf_divider)); - regs.rf_divider_select = rfdivsel_to_enum[tuning_settings.rf_divider]; - regs.ldf = is_int_n ? - adf4351_regs_t::LDF_INT_N : - adf4351_regs_t::LDF_FRAC_N; - - //reset the N and R counter - regs.counter_reset = adf4351_regs_t::COUNTER_RESET_ENABLED; - self_base->get_iface()->write_spi(unit, spi_config_t::EDGE_RISE, regs.get_reg(2), 32); - regs.counter_reset = adf4351_regs_t::COUNTER_RESET_DISABLED; - - //write the registers - //correct power-up sequence to write registers (5, 4, 3, 2, 1, 0) - int addr; - - boost::uint16_t rx_id = self_base->get_rx_id().to_uint16(); - std::string board_name = (rx_id == 0x0083) ? "SBX-120" : "SBX"; - for(addr=5; addr>=0; addr--){ - UHD_LOGV(often) << boost::format( - "%s SPI Reg (0x%02x): 0x%08x" - ) % board_name.c_str() % addr % regs.get_reg(addr) << std::endl; - self_base->get_iface()->write_spi( - unit, spi_config_t::EDGE_RISE, - regs.get_reg(addr), 32 - ); + //Select the LO + adf435x_iface::sptr& lo_iface = unit == dboard_iface::UNIT_RX ? _rxlo : _txlo; + lo_iface->set_feedback_select(adf435x_iface::FB_SEL_DIVIDED); + lo_iface->set_reference_freq(self_base->get_iface()->get_clock_rate(unit)); + + //Use 8/9 prescaler for vco_freq > 3 GHz (pg.18 prescaler) + lo_iface->set_prescaler(target_freq > 3.6e9 ? adf435x_iface::PRESCALER_8_9 : adf435x_iface::PRESCALER_4_5); + + //Configure the LO + double actual_freq = 0.0; + actual_freq = lo_iface->set_frequency(sbx_freq_range.clip(target_freq), is_int_n); + + if ((unit == dboard_iface::UNIT_TX) and (actual_freq == sbx_tx_lo_2dbm.clip(actual_freq))) { + lo_iface->set_output_power(adf435x_iface::OUTPUT_POWER_2DBM); + } else { + lo_iface->set_output_power(adf435x_iface::OUTPUT_POWER_5DBM); } - //return the actual frequency - UHD_LOGV(often) << boost::format( - "%s tune: actual frequency %f MHz" - ) % board_name.c_str() % (actual_freq/1e6) << std::endl; + //Write to hardware + lo_iface->commit(); + return actual_freq; } diff --git a/host/lib/usrp/dboard/db_tvrx.cpp b/host/lib/usrp/dboard/db_tvrx.cpp index e9f60f765..0f84cd68a 100644 --- a/host/lib/usrp/dboard/db_tvrx.cpp +++ b/host/lib/usrp/dboard/db_tvrx.cpp @@ -134,7 +134,7 @@ static const double reference_freq = 4.0e6; class tvrx : public rx_dboard_base{ public: tvrx(ctor_args_t args); - ~tvrx(void); + virtual ~tvrx(void); private: uhd::dict<std::string, double> _gains; @@ -190,12 +190,12 @@ tvrx::tvrx(ctor_args_t args) : rx_dboard_base(args){ this->get_rx_subtree()->create<int>("sensors"); //phony property so this dir exists BOOST_FOREACH(const std::string &name, get_tvrx_gain_ranges().keys()){ this->get_rx_subtree()->create<double>("gains/"+name+"/value") - .coerce(boost::bind(&tvrx::set_gain, this, _1, name)); + .set_coercer(boost::bind(&tvrx::set_gain, this, _1, name)); this->get_rx_subtree()->create<meta_range_t>("gains/"+name+"/range") .set(get_tvrx_gain_ranges()[name]); } this->get_rx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&tvrx::set_freq, this, _1)); + .set_coercer(boost::bind(&tvrx::set_freq, this, _1)); this->get_rx_subtree()->create<meta_range_t>("freq/range") .set(tvrx_freq_range); this->get_rx_subtree()->create<std::string>("antenna/value") diff --git a/host/lib/usrp/dboard/db_tvrx2.cpp b/host/lib/usrp/dboard/db_tvrx2.cpp index 00c2fef50..3a5bc1198 100644 --- a/host/lib/usrp/dboard/db_tvrx2.cpp +++ b/host/lib/usrp/dboard/db_tvrx2.cpp @@ -751,7 +751,7 @@ static const uhd::dict<std::string, gain_range_t> tvrx2_gain_ranges = map_list_o class tvrx2 : public rx_dboard_base{ public: tvrx2(ctor_args_t args); - ~tvrx2(void); + virtual ~tvrx2(void); private: double _freq_scalar; @@ -957,19 +957,19 @@ tvrx2::tvrx2(ctor_args_t args) : rx_dboard_base(args){ this->get_rx_subtree()->create<std::string>("name") .set("TVRX2"); this->get_rx_subtree()->create<sensor_value_t>("sensors/lo_locked") - .publish(boost::bind(&tvrx2::get_locked, this)); + .set_publisher(boost::bind(&tvrx2::get_locked, this)); this->get_rx_subtree()->create<sensor_value_t>("sensors/rssi") - .publish(boost::bind(&tvrx2::get_rssi, this)); + .set_publisher(boost::bind(&tvrx2::get_rssi, this)); this->get_rx_subtree()->create<sensor_value_t>("sensors/temperature") - .publish(boost::bind(&tvrx2::get_temp, this)); + .set_publisher(boost::bind(&tvrx2::get_temp, this)); BOOST_FOREACH(const std::string &name, tvrx2_gain_ranges.keys()){ this->get_rx_subtree()->create<double>("gains/"+name+"/value") - .coerce(boost::bind(&tvrx2::set_gain, this, _1, name)); + .set_coercer(boost::bind(&tvrx2::set_gain, this, _1, name)); this->get_rx_subtree()->create<meta_range_t>("gains/"+name+"/range") .set(tvrx2_gain_ranges[name]); } this->get_rx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&tvrx2::set_lo_freq, this, _1)); + .set_coercer(boost::bind(&tvrx2::set_lo_freq, this, _1)); this->get_rx_subtree()->create<meta_range_t>("freq/range") .set(tvrx2_freq_range); this->get_rx_subtree()->create<std::string>("antenna/value") @@ -979,12 +979,12 @@ tvrx2::tvrx2(ctor_args_t args) : rx_dboard_base(args){ this->get_rx_subtree()->create<std::string>("connection") .set(tvrx2_sd_name_to_conn[get_subdev_name()]); this->get_rx_subtree()->create<bool>("enabled") - .coerce(boost::bind(&tvrx2::set_enabled, this, _1)) + .set_coercer(boost::bind(&tvrx2::set_enabled, this, _1)) .set(_enabled); this->get_rx_subtree()->create<bool>("use_lo_offset") .set(false); this->get_rx_subtree()->create<double>("bandwidth/value") - .coerce(boost::bind(&tvrx2::set_bandwidth, this, _1)) + .set_coercer(boost::bind(&tvrx2::set_bandwidth, this, _1)) .set(_bandwidth); this->get_rx_subtree()->create<meta_range_t>("bandwidth/range") .set(tvrx2_bandwidth_range); diff --git a/host/lib/usrp/dboard/db_ubx.cpp b/host/lib/usrp/dboard/db_ubx.cpp index 0bf57cb70..88c8d93c9 100644 --- a/host/lib/usrp/dboard/db_ubx.cpp +++ b/host/lib/usrp/dboard/db_ubx.cpp @@ -27,7 +27,9 @@ #include <uhd/usrp/dboard_manager.hpp> #include <uhd/utils/assert_has.hpp> #include <uhd/utils/log.hpp> +#include <uhd/utils/msg.hpp> #include <uhd/utils/static.hpp> +#include <uhd/utils/safe_call.hpp> #include <boost/assign/list_of.hpp> #include <boost/shared_ptr.hpp> #include <boost/math/special_functions/round.hpp> @@ -319,14 +321,14 @@ public: write_gpio(); // Configure ATR - _iface->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, _tx_gpio_reg.atr_idle); - _iface->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, _tx_gpio_reg.atr_tx); - _iface->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, _tx_gpio_reg.atr_rx); - _iface->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _tx_gpio_reg.atr_full_duplex); - _iface->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, _rx_gpio_reg.atr_idle); - _iface->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, _rx_gpio_reg.atr_tx); - _iface->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, _rx_gpio_reg.atr_rx); - _iface->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _rx_gpio_reg.atr_full_duplex); + _iface->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE, _tx_gpio_reg.atr_idle); + _iface->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, _tx_gpio_reg.atr_tx); + _iface->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY, _tx_gpio_reg.atr_rx); + _iface->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, _tx_gpio_reg.atr_full_duplex); + _iface->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, _rx_gpio_reg.atr_idle); + _iface->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, _rx_gpio_reg.atr_tx); + _iface->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, _rx_gpio_reg.atr_rx); + _iface->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, _rx_gpio_reg.atr_full_duplex); // Engage ATR control (1 is ATR control, 0 is manual control) _iface->set_pin_ctrl(dboard_iface::UNIT_TX, _tx_gpio_reg.atr_mask); @@ -385,23 +387,23 @@ public: get_rx_subtree()->create<std::vector<std::string> >("power_mode/options") .set(ubx_power_modes); get_rx_subtree()->create<std::string>("power_mode/value") - .subscribe(boost::bind(&ubx_xcvr::set_power_mode, this, _1)) + .add_coerced_subscriber(boost::bind(&ubx_xcvr::set_power_mode, this, _1)) .set("performance"); get_rx_subtree()->create<std::vector<std::string> >("xcvr_mode/options") .set(ubx_xcvr_modes); get_rx_subtree()->create<std::string>("xcvr_mode/value") - .subscribe(boost::bind(&ubx_xcvr::set_xcvr_mode, this, _1)) + .add_coerced_subscriber(boost::bind(&ubx_xcvr::set_xcvr_mode, this, _1)) .set("FDX"); get_tx_subtree()->create<std::vector<std::string> >("power_mode/options") .set(ubx_power_modes); get_tx_subtree()->create<std::string>("power_mode/value") - .subscribe(boost::bind(&uhd::property<std::string>::set, &get_rx_subtree()->access<std::string>("power_mode/value"), _1)) - .publish(boost::bind(&uhd::property<std::string>::get, &get_rx_subtree()->access<std::string>("power_mode/value"))); + .add_coerced_subscriber(boost::bind(&uhd::property<std::string>::set, &get_rx_subtree()->access<std::string>("power_mode/value"), _1)) + .set_publisher(boost::bind(&uhd::property<std::string>::get, &get_rx_subtree()->access<std::string>("power_mode/value"))); get_tx_subtree()->create<std::vector<std::string> >("xcvr_mode/options") .set(ubx_xcvr_modes); get_tx_subtree()->create<std::string>("xcvr_mode/value") - .subscribe(boost::bind(&uhd::property<std::string>::set, &get_rx_subtree()->access<std::string>("xcvr_mode/value"), _1)) - .publish(boost::bind(&uhd::property<std::string>::get, &get_rx_subtree()->access<std::string>("xcvr_mode/value"))); + .add_coerced_subscriber(boost::bind(&uhd::property<std::string>::set, &get_rx_subtree()->access<std::string>("xcvr_mode/value"), _1)) + .set_publisher(boost::bind(&uhd::property<std::string>::get, &get_rx_subtree()->access<std::string>("xcvr_mode/value"))); //////////////////////////////////////////////////////////////////// // Register TX properties @@ -410,20 +412,20 @@ public: get_tx_subtree()->create<device_addr_t>("tune_args") .set(device_addr_t()); get_tx_subtree()->create<sensor_value_t>("sensors/lo_locked") - .publish(boost::bind(&ubx_xcvr::get_locked, this, "TXLO")); + .set_publisher(boost::bind(&ubx_xcvr::get_locked, this, "TXLO")); get_tx_subtree()->create<double>("gains/PGA0/value") - .coerce(boost::bind(&ubx_xcvr::set_tx_gain, this, _1)).set(0); + .set_coercer(boost::bind(&ubx_xcvr::set_tx_gain, this, _1)).set(0); get_tx_subtree()->create<meta_range_t>("gains/PGA0/range") .set(ubx_tx_gain_range); get_tx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&ubx_xcvr::set_tx_freq, this, _1)) + .set_coercer(boost::bind(&ubx_xcvr::set_tx_freq, this, _1)) .set(ubx_freq_range.start()); get_tx_subtree()->create<meta_range_t>("freq/range") .set(ubx_freq_range); get_tx_subtree()->create<std::vector<std::string> >("antenna/options") .set(ubx_tx_antennas); get_tx_subtree()->create<std::string>("antenna/value") - .subscribe(boost::bind(&ubx_xcvr::set_tx_ant, this, _1)) + .add_coerced_subscriber(boost::bind(&ubx_xcvr::set_tx_ant, this, _1)) .set(ubx_tx_antennas.at(0)); get_tx_subtree()->create<std::string>("connection") .set("QI"); @@ -436,7 +438,7 @@ public: get_tx_subtree()->create<meta_range_t>("bandwidth/range") .set(freq_range_t(bw, bw)); get_tx_subtree()->create<int64_t>("sync_delay") - .subscribe(boost::bind(&ubx_xcvr::set_sync_delay, this, true, _1)) + .add_coerced_subscriber(boost::bind(&ubx_xcvr::set_sync_delay, this, true, _1)) .set(-8); //////////////////////////////////////////////////////////////////// @@ -446,21 +448,21 @@ public: get_rx_subtree()->create<device_addr_t>("tune_args") .set(device_addr_t()); get_rx_subtree()->create<sensor_value_t>("sensors/lo_locked") - .publish(boost::bind(&ubx_xcvr::get_locked, this, "RXLO")); + .set_publisher(boost::bind(&ubx_xcvr::get_locked, this, "RXLO")); get_rx_subtree()->create<double>("gains/PGA0/value") - .coerce(boost::bind(&ubx_xcvr::set_rx_gain, this, _1)) + .set_coercer(boost::bind(&ubx_xcvr::set_rx_gain, this, _1)) .set(0); get_rx_subtree()->create<meta_range_t>("gains/PGA0/range") .set(ubx_rx_gain_range); get_rx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&ubx_xcvr::set_rx_freq, this, _1)) + .set_coercer(boost::bind(&ubx_xcvr::set_rx_freq, this, _1)) .set(ubx_freq_range.start()); get_rx_subtree()->create<meta_range_t>("freq/range") .set(ubx_freq_range); get_rx_subtree()->create<std::vector<std::string> >("antenna/options") .set(ubx_rx_antennas); get_rx_subtree()->create<std::string>("antenna/value") - .subscribe(boost::bind(&ubx_xcvr::set_rx_ant, this, _1)).set("RX2"); + .add_coerced_subscriber(boost::bind(&ubx_xcvr::set_rx_ant, this, _1)).set("RX2"); get_rx_subtree()->create<std::string>("connection") .set("IQ"); get_rx_subtree()->create<bool>("enabled") @@ -472,35 +474,38 @@ public: get_rx_subtree()->create<meta_range_t>("bandwidth/range") .set(freq_range_t(bw, bw)); get_rx_subtree()->create<int64_t>("sync_delay") - .subscribe(boost::bind(&ubx_xcvr::set_sync_delay, this, false, _1)) + .add_coerced_subscriber(boost::bind(&ubx_xcvr::set_sync_delay, this, false, _1)) .set(-8); } - ~ubx_xcvr(void) + virtual ~ubx_xcvr(void) { - // Shutdown synthesizers - _txlo1->shutdown(); - _txlo2->shutdown(); - _rxlo1->shutdown(); - _rxlo2->shutdown(); + UHD_SAFE_CALL + ( + // Shutdown synthesizers + _txlo1->shutdown(); + _txlo2->shutdown(); + _rxlo1->shutdown(); + _rxlo2->shutdown(); - // Reset CPLD values - _cpld_reg.value = 0; - write_cpld_reg(); + // Reset CPLD values + _cpld_reg.value = 0; + write_cpld_reg(); - // Reset GPIO values - set_gpio_field(TX_GAIN, 0); - set_gpio_field(CPLD_RST_N, 0); - set_gpio_field(RX_ANT, 1); - set_gpio_field(TX_EN_N, 1); - set_gpio_field(RX_EN_N, 1); - set_gpio_field(SPI_ADDR, 0x7); - set_gpio_field(RX_GAIN, 0); - set_gpio_field(TXLO1_SYNC, 0); - set_gpio_field(TXLO2_SYNC, 0); - set_gpio_field(RXLO1_SYNC, 0); - set_gpio_field(RXLO1_SYNC, 0); - write_gpio(); + // Reset GPIO values + set_gpio_field(TX_GAIN, 0); + set_gpio_field(CPLD_RST_N, 0); + set_gpio_field(RX_ANT, 1); + set_gpio_field(TX_EN_N, 1); + set_gpio_field(RX_EN_N, 1); + set_gpio_field(SPI_ADDR, 0x7); + set_gpio_field(RX_GAIN, 0); + set_gpio_field(TXLO1_SYNC, 0); + set_gpio_field(TXLO2_SYNC, 0); + set_gpio_field(RXLO1_SYNC, 0); + set_gpio_field(RXLO1_SYNC, 0); + write_gpio(); + ) } private: @@ -638,23 +643,23 @@ private: uint16_t mask = lo1_field_info.mask | lo2_field_info.mask; dboard_iface::unit_t unit = lo1_field_info.unit; UHD_ASSERT_THROW(lo1_field_info.unit == lo2_field_info.unit); - _iface->set_atr_reg(unit, dboard_iface::ATR_REG_IDLE, value, mask); + _iface->set_atr_reg(unit, gpio_atr::ATR_REG_IDLE, value, mask); cmd_time += uhd::time_spec_t(1/pfd_freq); _iface->set_command_time(cmd_time); - _iface->set_atr_reg(unit, dboard_iface::ATR_REG_TX_ONLY, value, mask); + _iface->set_atr_reg(unit, gpio_atr::ATR_REG_TX_ONLY, value, mask); cmd_time += uhd::time_spec_t(1/pfd_freq); _iface->set_command_time(cmd_time); - _iface->set_atr_reg(unit, dboard_iface::ATR_REG_RX_ONLY, value, mask); + _iface->set_atr_reg(unit, gpio_atr::ATR_REG_RX_ONLY, value, mask); cmd_time += uhd::time_spec_t(1/pfd_freq); _iface->set_command_time(cmd_time); - _iface->set_atr_reg(unit, dboard_iface::ATR_REG_FULL_DUPLEX, value, mask); + _iface->set_atr_reg(unit, gpio_atr::ATR_REG_FULL_DUPLEX, value, mask); // De-assert SYNC // Head of line blocking means the command time does not need to be set. - _iface->set_atr_reg(unit, dboard_iface::ATR_REG_IDLE, 0, mask); - _iface->set_atr_reg(unit, dboard_iface::ATR_REG_TX_ONLY, 0, mask); - _iface->set_atr_reg(unit, dboard_iface::ATR_REG_RX_ONLY, 0, mask); - _iface->set_atr_reg(unit, dboard_iface::ATR_REG_FULL_DUPLEX, 0, mask); + _iface->set_atr_reg(unit, gpio_atr::ATR_REG_IDLE, 0, mask); + _iface->set_atr_reg(unit, gpio_atr::ATR_REG_TX_ONLY, 0, mask); + _iface->set_atr_reg(unit, gpio_atr::ATR_REG_RX_ONLY, 0, mask); + _iface->set_atr_reg(unit, gpio_atr::ATR_REG_FULL_DUPLEX, 0, mask); } } @@ -751,6 +756,20 @@ private: device_addr_t tune_args = subtree->access<device_addr_t>("tune_args").get(); is_int_n = boost::iequals(tune_args.get("mode_n",""), "integer"); UHD_LOGV(rarely) << boost::format("UBX TX: the requested frequency is %f MHz") % (freq/1e6) << std::endl; + double target_pfd_freq = _tx_target_pfd_freq; + if (is_int_n and tune_args.has_key("int_n_step")) + { + target_pfd_freq = tune_args.cast<double>("int_n_step", _tx_target_pfd_freq); + if (target_pfd_freq > _tx_target_pfd_freq) + { + UHD_MSG(warning) + << boost::format("Requested int_n_step of %f MHz too large, clipping to %f MHz") + % (target_pfd_freq/1e6) + % (_tx_target_pfd_freq/1e6) + << std::endl; + target_pfd_freq = _tx_target_pfd_freq; + } + } // Clip the frequency to the valid range freq = ubx_freq_range.clip(freq); @@ -787,10 +806,10 @@ private: set_cpld_field(TXLB_SEL, 1); set_cpld_field(TXHB_SEL, 0); // Set LO1 to IF of 2100 MHz (offset from RX IF to reduce leakage) - freq_lo1 = _txlo1->set_frequency(2100*fMHz, ref_freq, _tx_target_pfd_freq, is_int_n); + freq_lo1 = _txlo1->set_frequency(2100*fMHz, ref_freq, target_pfd_freq, is_int_n); _txlo1->set_output_power(max287x_iface::OUTPUT_POWER_5DBM); // Set LO2 to IF minus desired frequency - freq_lo2 = _txlo2->set_frequency(freq_lo1 - freq, ref_freq, _tx_target_pfd_freq, is_int_n); + freq_lo2 = _txlo2->set_frequency(freq_lo1 - freq, ref_freq, target_pfd_freq, is_int_n); _txlo2->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq >= (500*fMHz)) && (freq <= (800*fMHz))) @@ -800,7 +819,7 @@ private: set_cpld_field(TXLO1_FSEL1, 1); set_cpld_field(TXLB_SEL, 0); set_cpld_field(TXHB_SEL, 1); - freq_lo1 = _txlo1->set_frequency(freq, ref_freq, _tx_target_pfd_freq, is_int_n); + freq_lo1 = _txlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _txlo1->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq > (800*fMHz)) && (freq <= (1000*fMHz))) @@ -810,7 +829,7 @@ private: set_cpld_field(TXLO1_FSEL1, 1); set_cpld_field(TXLB_SEL, 0); set_cpld_field(TXHB_SEL, 1); - freq_lo1 = _txlo1->set_frequency(freq, ref_freq, _tx_target_pfd_freq, is_int_n); + freq_lo1 = _txlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _txlo1->set_output_power(max287x_iface::OUTPUT_POWER_5DBM); } else if ((freq > (1000*fMHz)) && (freq <= (2200*fMHz))) @@ -820,7 +839,7 @@ private: set_cpld_field(TXLO1_FSEL1, 0); set_cpld_field(TXLB_SEL, 0); set_cpld_field(TXHB_SEL, 1); - freq_lo1 = _txlo1->set_frequency(freq, ref_freq, _tx_target_pfd_freq, is_int_n); + freq_lo1 = _txlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _txlo1->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq > (2200*fMHz)) && (freq <= (2500*fMHz))) @@ -830,7 +849,7 @@ private: set_cpld_field(TXLO1_FSEL1, 0); set_cpld_field(TXLB_SEL, 0); set_cpld_field(TXHB_SEL, 1); - freq_lo1 = _txlo1->set_frequency(freq, ref_freq, _tx_target_pfd_freq, is_int_n); + freq_lo1 = _txlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _txlo1->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq > (2500*fMHz)) && (freq <= (6000*fMHz))) @@ -840,7 +859,7 @@ private: set_cpld_field(TXLO1_FSEL1, 0); set_cpld_field(TXLB_SEL, 0); set_cpld_field(TXHB_SEL, 1); - freq_lo1 = _txlo1->set_frequency(freq, ref_freq, _tx_target_pfd_freq, is_int_n); + freq_lo1 = _txlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _txlo1->set_output_power(max287x_iface::OUTPUT_POWER_5DBM); } @@ -893,6 +912,20 @@ private: property_tree::sptr subtree = this->get_rx_subtree(); device_addr_t tune_args = subtree->access<device_addr_t>("tune_args").get(); is_int_n = boost::iequals(tune_args.get("mode_n",""), "integer"); + double target_pfd_freq = _rx_target_pfd_freq; + if (is_int_n and tune_args.has_key("int_n_step")) + { + target_pfd_freq = tune_args.cast<double>("int_n_step", _rx_target_pfd_freq); + if (target_pfd_freq > _rx_target_pfd_freq) + { + UHD_MSG(warning) + << boost::format("Requested int_n_step of %f Mhz too large, clipping to %f MHz") + % (target_pfd_freq/1e6) + % (_rx_target_pfd_freq/1e6) + << std::endl; + target_pfd_freq = _rx_target_pfd_freq; + } + } // Clip the frequency to the valid range freq = ubx_freq_range.clip(freq); @@ -931,10 +964,10 @@ private: set_cpld_field(RXLB_SEL, 1); set_cpld_field(RXHB_SEL, 0); // Set LO1 to IF of 2380 MHz (2440 MHz filter center minus 60 MHz offset to minimize LO leakage) - freq_lo1 = _rxlo1->set_frequency(2380*fMHz, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo1 = _rxlo1->set_frequency(2380*fMHz, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_5DBM); // Set LO2 to IF minus desired frequency - freq_lo2 = _rxlo2->set_frequency(freq_lo1 - freq, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo2 = _rxlo2->set_frequency(freq_lo1 - freq, ref_freq, target_pfd_freq, is_int_n); _rxlo2->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq >= 100*fMHz) && (freq < 500*fMHz)) @@ -947,10 +980,10 @@ private: set_cpld_field(RXLB_SEL, 1); set_cpld_field(RXHB_SEL, 0); // Set LO1 to IF of 2440 (center of filter) - freq_lo1 = _rxlo1->set_frequency(2440*fMHz, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo1 = _rxlo1->set_frequency(2440*fMHz, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_5DBM); // Set LO2 to IF minus desired frequency - freq_lo2 = _rxlo2->set_frequency(freq_lo1 - freq, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo2 = _rxlo2->set_frequency(freq_lo1 - freq, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq >= 500*fMHz) && (freq < 800*fMHz)) @@ -962,7 +995,7 @@ private: set_cpld_field(RXLO1_FSEL1, 1); set_cpld_field(RXLB_SEL, 0); set_cpld_field(RXHB_SEL, 1); - freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq >= 800*fMHz) && (freq < 1000*fMHz)) @@ -974,7 +1007,7 @@ private: set_cpld_field(RXLO1_FSEL1, 1); set_cpld_field(RXLB_SEL, 0); set_cpld_field(RXHB_SEL, 1); - freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_5DBM); } else if ((freq >= 1000*fMHz) && (freq < 1500*fMHz)) @@ -986,7 +1019,7 @@ private: set_cpld_field(RXLO1_FSEL1, 0); set_cpld_field(RXLB_SEL, 0); set_cpld_field(RXHB_SEL, 1); - freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq >= 1500*fMHz) && (freq < 2200*fMHz)) @@ -998,7 +1031,7 @@ private: set_cpld_field(RXLO1_FSEL1, 0); set_cpld_field(RXLB_SEL, 0); set_cpld_field(RXHB_SEL, 1); - freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq >= 2200*fMHz) && (freq < 2500*fMHz)) @@ -1010,7 +1043,7 @@ private: set_cpld_field(RXLO1_FSEL1, 0); set_cpld_field(RXLB_SEL, 0); set_cpld_field(RXHB_SEL, 1); - freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_2DBM); } else if ((freq >= 2500*fMHz) && (freq <= 6000*fMHz)) @@ -1022,7 +1055,7 @@ private: set_cpld_field(RXLO1_FSEL1, 0); set_cpld_field(RXLB_SEL, 0); set_cpld_field(RXHB_SEL, 1); - freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, _rx_target_pfd_freq, is_int_n); + freq_lo1 = _rxlo1->set_frequency(freq, ref_freq, target_pfd_freq, is_int_n); _rxlo1->set_output_power(max287x_iface::OUTPUT_POWER_5DBM); } diff --git a/host/lib/usrp/dboard/db_wbx_common.cpp b/host/lib/usrp/dboard/db_wbx_common.cpp index 97357bc90..6539e798a 100644 --- a/host/lib/usrp/dboard/db_wbx_common.cpp +++ b/host/lib/usrp/dboard/db_wbx_common.cpp @@ -69,17 +69,17 @@ wbx_base::wbx_base(ctor_args_t args) : xcvr_dboard_base(args){ this->get_rx_subtree()->create<device_addr_t>("tune_args").set(device_addr_t()); this->get_rx_subtree()->create<sensor_value_t>("sensors/lo_locked") - .publish(boost::bind(&wbx_base::get_locked, this, dboard_iface::UNIT_RX)); + .set_publisher(boost::bind(&wbx_base::get_locked, this, dboard_iface::UNIT_RX)); BOOST_FOREACH(const std::string &name, wbx_rx_gain_ranges.keys()){ this->get_rx_subtree()->create<double>("gains/"+name+"/value") - .coerce(boost::bind(&wbx_base::set_rx_gain, this, _1, name)) + .set_coercer(boost::bind(&wbx_base::set_rx_gain, this, _1, name)) .set(wbx_rx_gain_ranges[name].start()); this->get_rx_subtree()->create<meta_range_t>("gains/"+name+"/range") .set(wbx_rx_gain_ranges[name]); } this->get_rx_subtree()->create<std::string>("connection").set("IQ"); this->get_rx_subtree()->create<bool>("enabled") - .subscribe(boost::bind(&wbx_base::set_rx_enabled, this, _1)) + .add_coerced_subscriber(boost::bind(&wbx_base::set_rx_enabled, this, _1)) .set(true); //start enabled this->get_rx_subtree()->create<bool>("use_lo_offset").set(false); @@ -94,7 +94,7 @@ wbx_base::wbx_base(ctor_args_t args) : xcvr_dboard_base(args){ this->get_tx_subtree()->create<device_addr_t>("tune_args").set(device_addr_t()); this->get_tx_subtree()->create<sensor_value_t>("sensors/lo_locked") - .publish(boost::bind(&wbx_base::get_locked, this, dboard_iface::UNIT_TX)); + .set_publisher(boost::bind(&wbx_base::get_locked, this, dboard_iface::UNIT_TX)); this->get_tx_subtree()->create<std::string>("connection").set("IQ"); this->get_tx_subtree()->create<bool>("use_lo_offset").set(false); @@ -156,3 +156,9 @@ sensor_value_t wbx_base::get_locked(dboard_iface::unit_t unit){ const bool locked = (this->get_iface()->read_gpio(unit) & LOCKDET_MASK) != 0; return sensor_value_t("LO", locked, "locked", "unlocked"); } + +void wbx_base::wbx_versionx::write_lo_regs(dboard_iface::unit_t unit, const std::vector<boost::uint32_t> ®s) { + BOOST_FOREACH(boost::uint32_t reg, regs) { + self_base->get_iface()->write_spi(unit, spi_config_t::EDGE_RISE, reg, 32); + } +} diff --git a/host/lib/usrp/dboard/db_wbx_common.hpp b/host/lib/usrp/dboard/db_wbx_common.hpp index 6a4224048..0e339e4a3 100644 --- a/host/lib/usrp/dboard/db_wbx_common.hpp +++ b/host/lib/usrp/dboard/db_wbx_common.hpp @@ -19,8 +19,13 @@ #define INCLUDED_LIBUHD_USRP_DBOARD_DB_WBX_COMMON_HPP #include <uhd/types/device_addr.hpp> +#include "adf435x.hpp" -#include "../common/adf435x_common.hpp" +// LO Related +#define ADF435X_CE (1 << 3) +#define ADF435X_PDBRF (1 << 2) +#define ADF435X_MUXOUT (1 << 1) // INPUT!!! +#define LOCKDET_MASK (1 << 0) // INPUT!!! // TX IO Pins #define TX_PUP_5V (1 << 7) // enables 5.0V power supply @@ -40,6 +45,9 @@ #define TX_ATTN_1 (1 << 1) #define TX_ATTN_MASK (TX_ATTN_16|TX_ATTN_8|TX_ATTN_4|TX_ATTN_2|TX_ATTN_1) // valid bits of TX Attenuator Control +#define RX_ATTN_SHIFT 8 //lsb of RX Attenuator Control +#define RX_ATTN_MASK (63 << RX_ATTN_SHIFT) //valid bits of RX Attenuator Control + // Mixer functions #define TX_MIXER_ENB (TXMOD_EN|ADF435X_PDBRF) // for v3, TXMOD_EN tied to ADF435X_PDBRF rather than separate #define TX_MIXER_DIS 0 @@ -142,6 +150,10 @@ protected: property_tree::sptr get_tx_subtree(void){ return self_base->get_tx_subtree(); } + + adf435x_iface::sptr _txlo; + adf435x_iface::sptr _rxlo; + void write_lo_regs(dboard_iface::unit_t unit, const std::vector<boost::uint32_t> ®s); }; @@ -153,7 +165,7 @@ protected: class wbx_version2 : public wbx_versionx { public: wbx_version2(wbx_base *_self_wbx_base); - ~wbx_version2(void); + virtual ~wbx_version2(void); double set_tx_gain(double gain, const std::string &name); void set_tx_enabled(bool enb); @@ -168,7 +180,7 @@ protected: class wbx_version3 : public wbx_versionx { public: wbx_version3(wbx_base *_self_wbx_base); - ~wbx_version3(void); + virtual ~wbx_version3(void); double set_tx_gain(double gain, const std::string &name); void set_tx_enabled(bool enb); @@ -183,7 +195,7 @@ protected: class wbx_version4 : public wbx_versionx { public: wbx_version4(wbx_base *_self_wbx_base); - ~wbx_version4(void); + virtual ~wbx_version4(void); double set_tx_gain(double gain, const std::string &name); void set_tx_enabled(bool enb); diff --git a/host/lib/usrp/dboard/db_wbx_simple.cpp b/host/lib/usrp/dboard/db_wbx_simple.cpp index c8f2be155..062e1294b 100644 --- a/host/lib/usrp/dboard/db_wbx_simple.cpp +++ b/host/lib/usrp/dboard/db_wbx_simple.cpp @@ -46,7 +46,7 @@ static const std::vector<std::string> wbx_rx_antennas = list_of("TX/RX")("RX2")( class wbx_simple : public wbx_base{ public: wbx_simple(ctor_args_t args); - ~wbx_simple(void); + virtual ~wbx_simple(void); private: void set_rx_ant(const std::string &ant); @@ -88,7 +88,7 @@ wbx_simple::wbx_simple(ctor_args_t args) : wbx_base(args){ std::string(str(boost::format("%s+GDB") % this->get_rx_subtree()->access<std::string>("name").get() ))); this->get_rx_subtree()->create<std::string>("antenna/value") - .subscribe(boost::bind(&wbx_simple::set_rx_ant, this, _1)) + .add_coerced_subscriber(boost::bind(&wbx_simple::set_rx_ant, this, _1)) .set("RX2"); this->get_rx_subtree()->create<std::vector<std::string> >("antenna/options") .set(wbx_rx_antennas); @@ -100,7 +100,7 @@ wbx_simple::wbx_simple(ctor_args_t args) : wbx_base(args){ std::string(str(boost::format("%s+GDB") % this->get_tx_subtree()->access<std::string>("name").get() ))); this->get_tx_subtree()->create<std::string>("antenna/value") - .subscribe(boost::bind(&wbx_simple::set_tx_ant, this, _1)) + .add_coerced_subscriber(boost::bind(&wbx_simple::set_tx_ant, this, _1)) .set(wbx_tx_antennas.at(0)); this->get_tx_subtree()->create<std::vector<std::string> >("antenna/options") .set(wbx_tx_antennas); @@ -112,14 +112,14 @@ wbx_simple::wbx_simple(ctor_args_t args) : wbx_base(args){ this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, ANTSW_IO, ANTSW_IO); //setup ATR for the antenna switches (constant) - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, ANT_RX, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, ANT_RX, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, ANT_TX, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_TX, ANTSW_IO); - - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, ANT_TXRX, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, ANT_RX2, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_RX2, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE, ANT_RX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY, ANT_RX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, ANT_TX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_TX, ANTSW_IO); + + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, ANT_TXRX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, ANT_RX2, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_RX2, ANTSW_IO); } wbx_simple::~wbx_simple(void){ @@ -138,14 +138,14 @@ void wbx_simple::set_rx_ant(const std::string &ant){ //write the new antenna setting to atr regs if (_rx_ant == "CAL") { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, ANT_TXRX, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_TXRX, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, ANT_TXRX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, ANT_TXRX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_TXRX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, ANT_TXRX, ANTSW_IO); } else { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, ANT_RX2, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_RX2, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, ((_rx_ant == "TX/RX")? ANT_TXRX : ANT_RX2), ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, ANT_RX2, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_RX2, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, ((_rx_ant == "TX/RX")? ANT_TXRX : ANT_RX2), ANTSW_IO); } } @@ -154,11 +154,11 @@ void wbx_simple::set_tx_ant(const std::string &ant){ //write the new antenna setting to atr regs if (ant == "CAL") { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, ANT_RX, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_RX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, ANT_RX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_RX, ANTSW_IO); } else { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, ANT_TX, ANTSW_IO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_TX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, ANT_TX, ANTSW_IO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_TX, ANTSW_IO); } } diff --git a/host/lib/usrp/dboard/db_wbx_version2.cpp b/host/lib/usrp/dboard/db_wbx_version2.cpp index 93047fb7a..18dc383b7 100644 --- a/host/lib/usrp/dboard/db_wbx_version2.cpp +++ b/host/lib/usrp/dboard/db_wbx_version2.cpp @@ -16,8 +16,6 @@ // #include "db_wbx_common.hpp" -#include "adf4350_regs.hpp" -#include "../common/adf435x_common.hpp" #include <uhd/types/tune_request.hpp> #include <uhd/utils/log.hpp> #include <uhd/types/dict.hpp> @@ -77,13 +75,15 @@ static double tx_pga0_gain_to_dac_volts(double &gain){ wbx_base::wbx_version2::wbx_version2(wbx_base *_self_wbx_base) { //register our handle on the primary wbx_base instance self_base = _self_wbx_base; + _txlo = adf435x_iface::make_adf4350(boost::bind(&wbx_base::wbx_versionx::write_lo_regs, this, dboard_iface::UNIT_TX, _1)); + _rxlo = adf435x_iface::make_adf4350(boost::bind(&wbx_base::wbx_versionx::write_lo_regs, this, dboard_iface::UNIT_RX, _1)); //////////////////////////////////////////////////////////////////// // Register RX properties //////////////////////////////////////////////////////////////////// this->get_rx_subtree()->create<std::string>("name").set("WBXv2 RX"); this->get_rx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&wbx_base::wbx_version2::set_lo_freq, this, dboard_iface::UNIT_RX, _1)) + .set_coercer(boost::bind(&wbx_base::wbx_version2::set_lo_freq, this, dboard_iface::UNIT_RX, _1)) .set((wbx_v2_freq_range.start() + wbx_v2_freq_range.stop())/2.0); this->get_rx_subtree()->create<meta_range_t>("freq/range").set(wbx_v2_freq_range); @@ -93,17 +93,17 @@ wbx_base::wbx_version2::wbx_version2(wbx_base *_self_wbx_base) { this->get_tx_subtree()->create<std::string>("name").set("WBXv2 TX"); BOOST_FOREACH(const std::string &name, wbx_v2_tx_gain_ranges.keys()){ self_base->get_tx_subtree()->create<double>("gains/"+name+"/value") - .coerce(boost::bind(&wbx_base::wbx_version2::set_tx_gain, this, _1, name)) + .set_coercer(boost::bind(&wbx_base::wbx_version2::set_tx_gain, this, _1, name)) .set(wbx_v2_tx_gain_ranges[name].start()); self_base->get_tx_subtree()->create<meta_range_t>("gains/"+name+"/range") .set(wbx_v2_tx_gain_ranges[name]); } this->get_tx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&wbx_base::wbx_version2::set_lo_freq, this, dboard_iface::UNIT_TX, _1)) + .set_coercer(boost::bind(&wbx_base::wbx_version2::set_lo_freq, this, dboard_iface::UNIT_TX, _1)) .set((wbx_v2_freq_range.start() + wbx_v2_freq_range.stop())/2.0); this->get_tx_subtree()->create<meta_range_t>("freq/range").set(wbx_v2_freq_range); this->get_tx_subtree()->create<bool>("enabled") - .subscribe(boost::bind(&wbx_base::wbx_version2::set_tx_enabled, this, _1)) + .add_coerced_subscriber(boost::bind(&wbx_base::wbx_version2::set_tx_enabled, this, _1)) .set(true); //start enabled //set attenuator control bits @@ -117,15 +117,15 @@ wbx_base::wbx_version2::wbx_version2(wbx_base *_self_wbx_base) { self_base->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, RX_PUP_5V|RX_PUP_3V|ADF435X_CE|RXBB_PDB|ADF435X_PDBRF|RX_ATTN_MASK); //setup ATR for the mixer enables (always enabled to prevent phase slip between bursts) - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod); - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod); - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod); - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod); - - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod); + + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); } wbx_base::wbx_version2::~wbx_version2(void){ @@ -178,108 +178,42 @@ double wbx_base::wbx_version2::set_lo_freq(dboard_iface::unit_t unit, double tar : self_base->get_tx_subtree(); device_addr_t tune_args = subtree->access<device_addr_t>("tune_args").get(); bool is_int_n = boost::iequals(tune_args.get("mode_n",""), "integer"); + double reference_freq = self_base->get_iface()->get_clock_rate(unit); - //map prescaler setting to mininmum integer divider (N) values (pg.18 prescaler) - static const uhd::dict<int, int> prescaler_to_min_int_div = map_list_of - (0,23) //adf4350_regs_t::PRESCALER_4_5 - (1,75) //adf4350_regs_t::PRESCALER_8_9 - ; - - //map rf divider select output dividers to enums - static const uhd::dict<int, adf4350_regs_t::rf_divider_select_t> rfdivsel_to_enum = map_list_of - (1, adf4350_regs_t::RF_DIVIDER_SELECT_DIV1) - (2, adf4350_regs_t::RF_DIVIDER_SELECT_DIV2) - (4, adf4350_regs_t::RF_DIVIDER_SELECT_DIV4) - (8, adf4350_regs_t::RF_DIVIDER_SELECT_DIV8) - (16, adf4350_regs_t::RF_DIVIDER_SELECT_DIV16) - ; + //Select the LO + adf435x_iface::sptr& lo_iface = unit == dboard_iface::UNIT_RX ? _rxlo : _txlo; + lo_iface->set_reference_freq(reference_freq); - double reference_freq = self_base->get_iface()->get_clock_rate(unit); //The mixer has a divide-by-2 stage on the LO port so the synthesizer //frequency must 2x the target frequency double synth_target_freq = target_freq * 2; - //TODO: Document why the following has to be true - bool div_resync_enabled = (target_freq > reference_freq); - - adf4350_regs_t::prescaler_t prescaler = - synth_target_freq > 3e9 ? adf4350_regs_t::PRESCALER_8_9 : adf4350_regs_t::PRESCALER_4_5; - - adf435x_tuning_constraints tuning_constraints; - tuning_constraints.force_frac0 = is_int_n; - tuning_constraints.band_sel_freq_max = 100e3; - tuning_constraints.ref_doubler_threshold = 12.5e6; - tuning_constraints.int_range = uhd::range_t(prescaler_to_min_int_div[prescaler], 4095); - tuning_constraints.pfd_freq_max = 25e6; - tuning_constraints.rf_divider_range = uhd::range_t(1, 16); + + //Use 8/9 prescaler for vco_freq > 3 GHz (pg.18 prescaler) + lo_iface->set_prescaler(synth_target_freq > 3e9 ? + adf435x_iface::PRESCALER_8_9 : adf435x_iface::PRESCALER_4_5); + //When divider resync is enabled, a 180 deg phase error is introduced when syncing //multiple WBX boards. Switching to fundamental mode works arounds this issue. - tuning_constraints.feedback_after_divider = div_resync_enabled; + //TODO: Document why the following has to be true + lo_iface->set_feedback_select((target_freq > reference_freq) ? + adf435x_iface::FB_SEL_DIVIDED : adf435x_iface::FB_SEL_FUNDAMENTAL); - double synth_actual_freq = 0; - adf435x_tuning_settings tuning_settings = tune_adf435x_synth( - synth_target_freq, reference_freq, tuning_constraints, synth_actual_freq); + double synth_actual_freq = lo_iface->set_frequency(synth_target_freq, is_int_n); //The mixer has a divide-by-2 stage on the LO port so the synthesizer //actual_freq must /2 the synth_actual_freq double actual_freq = synth_actual_freq / 2; - //load the register values - adf4350_regs_t regs; - - if (unit == dboard_iface::UNIT_RX) - regs.output_power = (actual_freq == wbx_rx_lo_5dbm.clip(actual_freq)) ? adf4350_regs_t::OUTPUT_POWER_5DBM - : adf4350_regs_t::OUTPUT_POWER_2DBM; - else - regs.output_power = (actual_freq == wbx_tx_lo_5dbm.clip(actual_freq)) ? adf4350_regs_t::OUTPUT_POWER_5DBM - : adf4350_regs_t::OUTPUT_POWER_M1DBM; - - regs.frac_12_bit = tuning_settings.frac_12_bit; - regs.int_16_bit = tuning_settings.int_16_bit; - regs.mod_12_bit = tuning_settings.mod_12_bit; - regs.clock_divider_12_bit = tuning_settings.clock_divider_12_bit; - regs.feedback_select = tuning_constraints.feedback_after_divider ? - adf4350_regs_t::FEEDBACK_SELECT_DIVIDED : - adf4350_regs_t::FEEDBACK_SELECT_FUNDAMENTAL; - regs.clock_div_mode = div_resync_enabled ? - adf4350_regs_t::CLOCK_DIV_MODE_RESYNC_ENABLE : - adf4350_regs_t::CLOCK_DIV_MODE_FAST_LOCK; - regs.prescaler = prescaler; - regs.r_counter_10_bit = tuning_settings.r_counter_10_bit; - regs.reference_divide_by_2 = tuning_settings.r_divide_by_2_en ? - adf4350_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED : - adf4350_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED; - regs.reference_doubler = tuning_settings.r_doubler_en ? - adf4350_regs_t::REFERENCE_DOUBLER_ENABLED : - adf4350_regs_t::REFERENCE_DOUBLER_DISABLED; - regs.band_select_clock_div = tuning_settings.band_select_clock_div; - UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(tuning_settings.rf_divider)); - regs.rf_divider_select = rfdivsel_to_enum[tuning_settings.rf_divider]; - regs.ldf = is_int_n ? - adf4350_regs_t::LDF_INT_N : - adf4350_regs_t::LDF_FRAC_N; - - //reset the N and R counter - regs.counter_reset = adf4350_regs_t::COUNTER_RESET_ENABLED; - self_base->get_iface()->write_spi(unit, spi_config_t::EDGE_RISE, regs.get_reg(2), 32); - regs.counter_reset = adf4350_regs_t::COUNTER_RESET_DISABLED; - - //write the registers - //correct power-up sequence to write registers (5, 4, 3, 2, 1, 0) - int addr; - - for(addr=5; addr>=0; addr--){ - UHD_LOGV(often) << boost::format( - "WBX SPI Reg (0x%02x): 0x%08x" - ) % addr % regs.get_reg(addr) << std::endl; - self_base->get_iface()->write_spi( - unit, spi_config_t::EDGE_RISE, - regs.get_reg(addr), 32 - ); + if (unit == dboard_iface::UNIT_RX) { + lo_iface->set_output_power((actual_freq == wbx_rx_lo_5dbm.clip(actual_freq)) ? + adf435x_iface::OUTPUT_POWER_5DBM : adf435x_iface::OUTPUT_POWER_2DBM); + } else { + lo_iface->set_output_power((actual_freq == wbx_tx_lo_5dbm.clip(actual_freq)) ? + adf435x_iface::OUTPUT_POWER_5DBM : adf435x_iface::OUTPUT_POWER_M1DBM); } - //return the actual frequency - UHD_LOGV(often) << boost::format( - "WBX tune: actual frequency %f MHz" - ) % (actual_freq/1e6) << std::endl; + //Write to hardware + lo_iface->commit(); + return actual_freq; } diff --git a/host/lib/usrp/dboard/db_wbx_version3.cpp b/host/lib/usrp/dboard/db_wbx_version3.cpp index 6927ae4e4..2add8d25d 100644 --- a/host/lib/usrp/dboard/db_wbx_version3.cpp +++ b/host/lib/usrp/dboard/db_wbx_version3.cpp @@ -16,8 +16,6 @@ // #include "db_wbx_common.hpp" -#include "adf4350_regs.hpp" -#include "../common/adf435x_common.hpp" #include <uhd/utils/log.hpp> #include <uhd/types/dict.hpp> #include <uhd/types/ranges.hpp> @@ -82,13 +80,15 @@ static int tx_pga0_gain_to_iobits(double &gain){ wbx_base::wbx_version3::wbx_version3(wbx_base *_self_wbx_base) { //register our handle on the primary wbx_base instance self_base = _self_wbx_base; + _txlo = adf435x_iface::make_adf4350(boost::bind(&wbx_base::wbx_versionx::write_lo_regs, this, dboard_iface::UNIT_TX, _1)); + _rxlo = adf435x_iface::make_adf4350(boost::bind(&wbx_base::wbx_versionx::write_lo_regs, this, dboard_iface::UNIT_RX, _1)); //////////////////////////////////////////////////////////////////// // Register RX properties //////////////////////////////////////////////////////////////////// this->get_rx_subtree()->create<std::string>("name").set("WBXv3 RX"); this->get_rx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&wbx_base::wbx_version3::set_lo_freq, this, dboard_iface::UNIT_RX, _1)) + .set_coercer(boost::bind(&wbx_base::wbx_version3::set_lo_freq, this, dboard_iface::UNIT_RX, _1)) .set((wbx_v3_freq_range.start() + wbx_v3_freq_range.stop())/2.0); this->get_rx_subtree()->create<meta_range_t>("freq/range").set(wbx_v3_freq_range); @@ -98,17 +98,17 @@ wbx_base::wbx_version3::wbx_version3(wbx_base *_self_wbx_base) { this->get_tx_subtree()->create<std::string>("name").set("WBXv3 TX"); BOOST_FOREACH(const std::string &name, wbx_v3_tx_gain_ranges.keys()){ self_base->get_tx_subtree()->create<double>("gains/"+name+"/value") - .coerce(boost::bind(&wbx_base::wbx_version3::set_tx_gain, this, _1, name)) + .set_coercer(boost::bind(&wbx_base::wbx_version3::set_tx_gain, this, _1, name)) .set(wbx_v3_tx_gain_ranges[name].start()); self_base->get_tx_subtree()->create<meta_range_t>("gains/"+name+"/range") .set(wbx_v3_tx_gain_ranges[name]); } this->get_tx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&wbx_base::wbx_version3::set_lo_freq, this, dboard_iface::UNIT_TX, _1)) + .set_coercer(boost::bind(&wbx_base::wbx_version3::set_lo_freq, this, dboard_iface::UNIT_TX, _1)) .set((wbx_v3_freq_range.start() + wbx_v3_freq_range.stop())/2.0); this->get_tx_subtree()->create<meta_range_t>("freq/range").set(wbx_v3_freq_range); this->get_tx_subtree()->create<bool>("enabled") - .subscribe(boost::bind(&wbx_base::wbx_version3::set_tx_enabled, this, _1)) + .add_coerced_subscriber(boost::bind(&wbx_base::wbx_version3::set_tx_enabled, this, _1)) .set(true); //start enabled //set attenuator control bits @@ -129,29 +129,29 @@ wbx_base::wbx_version3::wbx_version3(wbx_base *_self_wbx_base) { //slip between bursts). set TX gain iobits to min gain (max attenuation) //when RX_ONLY or IDLE to suppress LO leakage self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_IDLE, v3_tx_mod, \ + gpio_atr::ATR_REG_IDLE, v3_tx_mod, \ TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_RX_ONLY, v3_tx_mod, \ + gpio_atr::ATR_REG_RX_ONLY, v3_tx_mod, \ TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_TX_ONLY, v3_tx_mod, \ + gpio_atr::ATR_REG_TX_ONLY, v3_tx_mod, \ TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_FULL_DUPLEX, v3_tx_mod, \ + gpio_atr::ATR_REG_FULL_DUPLEX, v3_tx_mod, \ TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_IDLE, \ + gpio_atr::ATR_REG_IDLE, \ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_TX_ONLY, \ + gpio_atr::ATR_REG_TX_ONLY, \ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_RX_ONLY, \ + gpio_atr::ATR_REG_RX_ONLY, \ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_FULL_DUPLEX, \ + gpio_atr::ATR_REG_FULL_DUPLEX, \ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); } @@ -181,8 +181,8 @@ double wbx_base::wbx_version3::set_tx_gain(double gain, const std::string &name) //write the new gain to tx gpio outputs //Update ATR with gain io_bits, only update for TX_ONLY and FULL_DUPLEX ATR states - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, io_bits, TX_ATTN_MASK); - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, io_bits, TX_ATTN_MASK); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, io_bits, TX_ATTN_MASK); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, io_bits, TX_ATTN_MASK); } else UHD_THROW_INVALID_CODE_PATH(); return self_base->_tx_gains[name]; //shadow @@ -209,108 +209,42 @@ double wbx_base::wbx_version3::set_lo_freq(dboard_iface::unit_t unit, double tar : self_base->get_tx_subtree(); device_addr_t tune_args = subtree->access<device_addr_t>("tune_args").get(); bool is_int_n = boost::iequals(tune_args.get("mode_n",""), "integer"); + double reference_freq = self_base->get_iface()->get_clock_rate(unit); - //map prescaler setting to mininmum integer divider (N) values (pg.18 prescaler) - static const uhd::dict<int, int> prescaler_to_min_int_div = map_list_of - (0,23) //adf4350_regs_t::PRESCALER_4_5 - (1,75) //adf4350_regs_t::PRESCALER_8_9 - ; - - //map rf divider select output dividers to enums - static const uhd::dict<int, adf4350_regs_t::rf_divider_select_t> rfdivsel_to_enum = map_list_of - (1, adf4350_regs_t::RF_DIVIDER_SELECT_DIV1) - (2, adf4350_regs_t::RF_DIVIDER_SELECT_DIV2) - (4, adf4350_regs_t::RF_DIVIDER_SELECT_DIV4) - (8, adf4350_regs_t::RF_DIVIDER_SELECT_DIV8) - (16, adf4350_regs_t::RF_DIVIDER_SELECT_DIV16) - ; + //Select the LO + adf435x_iface::sptr& lo_iface = unit == dboard_iface::UNIT_RX ? _rxlo : _txlo; + lo_iface->set_reference_freq(reference_freq); - double reference_freq = self_base->get_iface()->get_clock_rate(unit); //The mixer has a divide-by-2 stage on the LO port so the synthesizer //frequency must 2x the target frequency double synth_target_freq = target_freq * 2; - //TODO: Document why the following has to be true - bool div_resync_enabled = (target_freq > reference_freq); - - adf4350_regs_t::prescaler_t prescaler = - synth_target_freq > 3e9 ? adf4350_regs_t::PRESCALER_8_9 : adf4350_regs_t::PRESCALER_4_5; - - adf435x_tuning_constraints tuning_constraints; - tuning_constraints.force_frac0 = is_int_n; - tuning_constraints.band_sel_freq_max = 100e3; - tuning_constraints.ref_doubler_threshold = 12.5e6; - tuning_constraints.int_range = uhd::range_t(prescaler_to_min_int_div[prescaler], 4095); - tuning_constraints.pfd_freq_max = 25e6; - tuning_constraints.rf_divider_range = uhd::range_t(1, 16); + + //Use 8/9 prescaler for vco_freq > 3 GHz (pg.18 prescaler) + lo_iface->set_prescaler(synth_target_freq > 3e9 ? + adf435x_iface::PRESCALER_8_9 : adf435x_iface::PRESCALER_4_5); + //When divider resync is enabled, a 180 deg phase error is introduced when syncing //multiple WBX boards. Switching to fundamental mode works arounds this issue. - tuning_constraints.feedback_after_divider = div_resync_enabled; + //TODO: Document why the following has to be true + lo_iface->set_feedback_select((target_freq > reference_freq) ? + adf435x_iface::FB_SEL_DIVIDED : adf435x_iface::FB_SEL_FUNDAMENTAL); - double synth_actual_freq = 0; - adf435x_tuning_settings tuning_settings = tune_adf435x_synth( - synth_target_freq, reference_freq, tuning_constraints, synth_actual_freq); + double synth_actual_freq = lo_iface->set_frequency(synth_target_freq, is_int_n); //The mixer has a divide-by-2 stage on the LO port so the synthesizer //actual_freq must /2 the synth_actual_freq double actual_freq = synth_actual_freq / 2; - //load the register values - adf4350_regs_t regs; - - if (unit == dboard_iface::UNIT_RX) - regs.output_power = (actual_freq == wbx_rx_lo_5dbm.clip(actual_freq)) ? adf4350_regs_t::OUTPUT_POWER_5DBM - : adf4350_regs_t::OUTPUT_POWER_2DBM; - else - regs.output_power = (actual_freq == wbx_tx_lo_5dbm.clip(actual_freq)) ? adf4350_regs_t::OUTPUT_POWER_5DBM - : adf4350_regs_t::OUTPUT_POWER_M1DBM; - - regs.frac_12_bit = tuning_settings.frac_12_bit; - regs.int_16_bit = tuning_settings.int_16_bit; - regs.mod_12_bit = tuning_settings.mod_12_bit; - regs.clock_divider_12_bit = tuning_settings.clock_divider_12_bit; - regs.feedback_select = tuning_constraints.feedback_after_divider ? - adf4350_regs_t::FEEDBACK_SELECT_DIVIDED : - adf4350_regs_t::FEEDBACK_SELECT_FUNDAMENTAL; - regs.clock_div_mode = div_resync_enabled ? - adf4350_regs_t::CLOCK_DIV_MODE_RESYNC_ENABLE : - adf4350_regs_t::CLOCK_DIV_MODE_FAST_LOCK; - regs.prescaler = prescaler; - regs.r_counter_10_bit = tuning_settings.r_counter_10_bit; - regs.reference_divide_by_2 = tuning_settings.r_divide_by_2_en ? - adf4350_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED : - adf4350_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED; - regs.reference_doubler = tuning_settings.r_doubler_en ? - adf4350_regs_t::REFERENCE_DOUBLER_ENABLED : - adf4350_regs_t::REFERENCE_DOUBLER_DISABLED; - regs.band_select_clock_div = tuning_settings.band_select_clock_div; - UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(tuning_settings.rf_divider)); - regs.rf_divider_select = rfdivsel_to_enum[tuning_settings.rf_divider]; - regs.ldf = is_int_n ? - adf4350_regs_t::LDF_INT_N : - adf4350_regs_t::LDF_FRAC_N; - - //reset the N and R counter - regs.counter_reset = adf4350_regs_t::COUNTER_RESET_ENABLED; - self_base->get_iface()->write_spi(unit, spi_config_t::EDGE_RISE, regs.get_reg(2), 32); - regs.counter_reset = adf4350_regs_t::COUNTER_RESET_DISABLED; - - //write the registers - //correct power-up sequence to write registers (5, 4, 3, 2, 1, 0) - int addr; - - for(addr=5; addr>=0; addr--){ - UHD_LOGV(often) << boost::format( - "WBX SPI Reg (0x%02x): 0x%08x" - ) % addr % regs.get_reg(addr) << std::endl; - self_base->get_iface()->write_spi( - unit, spi_config_t::EDGE_RISE, - regs.get_reg(addr), 32 - ); + if (unit == dboard_iface::UNIT_RX) { + lo_iface->set_output_power((actual_freq == wbx_rx_lo_5dbm.clip(actual_freq)) ? + adf435x_iface::OUTPUT_POWER_5DBM : adf435x_iface::OUTPUT_POWER_2DBM); + } else { + lo_iface->set_output_power((actual_freq == wbx_tx_lo_5dbm.clip(actual_freq)) ? + adf435x_iface::OUTPUT_POWER_5DBM : adf435x_iface::OUTPUT_POWER_M1DBM); } - //return the actual frequency - UHD_LOGV(often) << boost::format( - "WBX tune: actual frequency %f MHz" - ) % (actual_freq/1e6) << std::endl; + //Write to hardware + lo_iface->commit(); + return actual_freq; } diff --git a/host/lib/usrp/dboard/db_wbx_version4.cpp b/host/lib/usrp/dboard/db_wbx_version4.cpp index 81cdaefac..dc351af1d 100644 --- a/host/lib/usrp/dboard/db_wbx_version4.cpp +++ b/host/lib/usrp/dboard/db_wbx_version4.cpp @@ -16,8 +16,6 @@ // #include "db_wbx_common.hpp" -#include "adf4351_regs.hpp" -#include "../common/adf435x_common.hpp" #include <uhd/utils/log.hpp> #include <uhd/types/dict.hpp> #include <uhd/types/ranges.hpp> @@ -83,6 +81,8 @@ static int tx_pga0_gain_to_iobits(double &gain){ wbx_base::wbx_version4::wbx_version4(wbx_base *_self_wbx_base) { //register our handle on the primary wbx_base instance self_base = _self_wbx_base; + _txlo = adf435x_iface::make_adf4351(boost::bind(&wbx_base::wbx_versionx::write_lo_regs, this, dboard_iface::UNIT_TX, _1)); + _rxlo = adf435x_iface::make_adf4351(boost::bind(&wbx_base::wbx_versionx::write_lo_regs, this, dboard_iface::UNIT_RX, _1)); //////////////////////////////////////////////////////////////////// // Register RX properties @@ -92,7 +92,7 @@ wbx_base::wbx_version4::wbx_version4(wbx_base *_self_wbx_base) { if(rx_id == 0x0063) this->get_rx_subtree()->create<std::string>("name").set("WBXv4 RX"); else if(rx_id == 0x0081) this->get_rx_subtree()->create<std::string>("name").set("WBX-120 RX"); this->get_rx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&wbx_base::wbx_version4::set_lo_freq, this, dboard_iface::UNIT_RX, _1)) + .set_coercer(boost::bind(&wbx_base::wbx_version4::set_lo_freq, this, dboard_iface::UNIT_RX, _1)) .set((wbx_v4_freq_range.start() + wbx_v4_freq_range.stop())/2.0); this->get_rx_subtree()->create<meta_range_t>("freq/range").set(wbx_v4_freq_range); @@ -105,17 +105,17 @@ wbx_base::wbx_version4::wbx_version4(wbx_base *_self_wbx_base) { else if(rx_id == 0x0081) this->get_tx_subtree()->create<std::string>("name").set("WBX-120 TX"); BOOST_FOREACH(const std::string &name, wbx_v4_tx_gain_ranges.keys()){ self_base->get_tx_subtree()->create<double>("gains/"+name+"/value") - .coerce(boost::bind(&wbx_base::wbx_version4::set_tx_gain, this, _1, name)) + .set_coercer(boost::bind(&wbx_base::wbx_version4::set_tx_gain, this, _1, name)) .set(wbx_v4_tx_gain_ranges[name].start()); self_base->get_tx_subtree()->create<meta_range_t>("gains/"+name+"/range") .set(wbx_v4_tx_gain_ranges[name]); } this->get_tx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&wbx_base::wbx_version4::set_lo_freq, this, dboard_iface::UNIT_TX, _1)) + .set_coercer(boost::bind(&wbx_base::wbx_version4::set_lo_freq, this, dboard_iface::UNIT_TX, _1)) .set((wbx_v4_freq_range.start() + wbx_v4_freq_range.stop())/2.0); this->get_tx_subtree()->create<meta_range_t>("freq/range").set(wbx_v4_freq_range); this->get_tx_subtree()->create<bool>("enabled") - .subscribe(boost::bind(&wbx_base::wbx_version4::set_tx_enabled, this, _1)) + .add_coerced_subscriber(boost::bind(&wbx_base::wbx_version4::set_tx_enabled, this, _1)) .set(true); //start enabled //set attenuator control bits @@ -136,29 +136,29 @@ wbx_base::wbx_version4::wbx_version4(wbx_base *_self_wbx_base) { //between bursts) set TX gain iobits to min gain (max attenuation) when //RX_ONLY or IDLE to suppress LO leakage self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_IDLE, v4_tx_mod, \ + gpio_atr::ATR_REG_IDLE, v4_tx_mod, \ TX_ATTN_MASK | TX_MIXER_DIS | v4_tx_mod); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_RX_ONLY, v4_tx_mod, \ + gpio_atr::ATR_REG_RX_ONLY, v4_tx_mod, \ TX_ATTN_MASK | TX_MIXER_DIS | v4_tx_mod); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_TX_ONLY, v4_tx_mod, \ + gpio_atr::ATR_REG_TX_ONLY, v4_tx_mod, \ TX_ATTN_MASK | TX_MIXER_DIS | v4_tx_mod); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \ - dboard_iface::ATR_REG_FULL_DUPLEX, v4_tx_mod, \ + gpio_atr::ATR_REG_FULL_DUPLEX, v4_tx_mod, \ TX_ATTN_MASK | TX_MIXER_DIS | v4_tx_mod); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_IDLE, \ + gpio_atr::ATR_REG_IDLE, \ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_TX_ONLY, \ + gpio_atr::ATR_REG_TX_ONLY, \ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_RX_ONLY, \ + gpio_atr::ATR_REG_RX_ONLY, \ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \ - dboard_iface::ATR_REG_FULL_DUPLEX, \ + gpio_atr::ATR_REG_FULL_DUPLEX, \ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB); } @@ -188,8 +188,8 @@ double wbx_base::wbx_version4::set_tx_gain(double gain, const std::string &name) //write the new gain to tx gpio outputs //Update ATR with gain io_bits, only update for TX_ONLY and FULL_DUPLEX ATR states - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, io_bits, TX_ATTN_MASK); - self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, io_bits, TX_ATTN_MASK); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, io_bits, TX_ATTN_MASK); + self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, io_bits, TX_ATTN_MASK); } else UHD_THROW_INVALID_CODE_PATH(); @@ -217,116 +217,46 @@ double wbx_base::wbx_version4::set_lo_freq(dboard_iface::unit_t unit, double tar : self_base->get_tx_subtree(); device_addr_t tune_args = subtree->access<device_addr_t>("tune_args").get(); bool is_int_n = boost::iequals(tune_args.get("mode_n",""), "integer"); + double reference_freq = self_base->get_iface()->get_clock_rate(unit); - //map prescaler setting to mininmum integer divider (N) values (pg.18 prescaler) - static const uhd::dict<int, int> prescaler_to_min_int_div = map_list_of - (adf4351_regs_t::PRESCALER_4_5, 23) - (adf4351_regs_t::PRESCALER_8_9, 75) - ; - - //map rf divider select output dividers to enums - static const uhd::dict<int, adf4351_regs_t::rf_divider_select_t> rfdivsel_to_enum = map_list_of - (1, adf4351_regs_t::RF_DIVIDER_SELECT_DIV1) - (2, adf4351_regs_t::RF_DIVIDER_SELECT_DIV2) - (4, adf4351_regs_t::RF_DIVIDER_SELECT_DIV4) - (8, adf4351_regs_t::RF_DIVIDER_SELECT_DIV8) - (16, adf4351_regs_t::RF_DIVIDER_SELECT_DIV16) - (32, adf4351_regs_t::RF_DIVIDER_SELECT_DIV32) - (64, adf4351_regs_t::RF_DIVIDER_SELECT_DIV64) - ; + //Select the LO + adf435x_iface::sptr& lo_iface = unit == dboard_iface::UNIT_RX ? _rxlo : _txlo; + lo_iface->set_reference_freq(reference_freq); - double reference_freq = self_base->get_iface()->get_clock_rate(unit); //The mixer has a divide-by-2 stage on the LO port so the synthesizer //frequency must 2x the target frequency. This introduces a 180 degree phase //ambiguity when trying to synchronize the phase of multiple boards. double synth_target_freq = target_freq * 2; - adf4351_regs_t::prescaler_t prescaler = - synth_target_freq > 3.6e9 ? adf4351_regs_t::PRESCALER_8_9 : adf4351_regs_t::PRESCALER_4_5; + //Use 8/9 prescaler for vco_freq > 3 GHz (pg.18 prescaler) + lo_iface->set_prescaler(synth_target_freq > 3.6e9 ? + adf435x_iface::PRESCALER_8_9 : adf435x_iface::PRESCALER_4_5); - adf435x_tuning_constraints tuning_constraints; - tuning_constraints.force_frac0 = is_int_n; - tuning_constraints.band_sel_freq_max = 100e3; - tuning_constraints.ref_doubler_threshold = 12.5e6; - tuning_constraints.int_range = uhd::range_t(prescaler_to_min_int_div[prescaler], 4095); - tuning_constraints.pfd_freq_max = 25e6; - tuning_constraints.rf_divider_range = uhd::range_t(1, 64); //The feedback of the divided frequency must be disabled whenever the target frequency //divided by the minimum PFD frequency cannot meet the minimum integer divider (N) value. //If it is disabled, additional phase ambiguity will be introduced. With a minimum PFD //frequency of 10 MHz, synthesizer frequencies below 230 MHz (LO frequencies below 115 MHz) //will have too much ambiguity to synchronize. - tuning_constraints.feedback_after_divider = - (int(synth_target_freq / 10e6) >= prescaler_to_min_int_div[prescaler]); + lo_iface->set_feedback_select( + (int(synth_target_freq / 10e6) >= lo_iface->get_int_range().start() ? + adf435x_iface::FB_SEL_DIVIDED : adf435x_iface::FB_SEL_FUNDAMENTAL)); - double synth_actual_freq = 0; - adf435x_tuning_settings tuning_settings = tune_adf435x_synth( - synth_target_freq, reference_freq, tuning_constraints, synth_actual_freq); + double synth_actual_freq = lo_iface->set_frequency(synth_target_freq, is_int_n); //The mixer has a divide-by-2 stage on the LO port so the synthesizer //actual_freq must /2 the synth_actual_freq double actual_freq = synth_actual_freq / 2; - //load the register values - adf4351_regs_t regs; - - if (unit == dboard_iface::UNIT_RX) - regs.output_power = (actual_freq == wbx_rx_lo_5dbm.clip(actual_freq)) ? adf4351_regs_t::OUTPUT_POWER_5DBM - : adf4351_regs_t::OUTPUT_POWER_2DBM; - else - regs.output_power = (actual_freq == wbx_tx_lo_5dbm.clip(actual_freq)) ? adf4351_regs_t::OUTPUT_POWER_5DBM - : adf4351_regs_t::OUTPUT_POWER_M1DBM; - - regs.frac_12_bit = tuning_settings.frac_12_bit; - regs.int_16_bit = tuning_settings.int_16_bit; - regs.mod_12_bit = tuning_settings.mod_12_bit; - regs.clock_divider_12_bit = tuning_settings.clock_divider_12_bit; - regs.feedback_select = tuning_constraints.feedback_after_divider ? - adf4351_regs_t::FEEDBACK_SELECT_DIVIDED : - adf4351_regs_t::FEEDBACK_SELECT_FUNDAMENTAL; - regs.clock_div_mode = tuning_constraints.feedback_after_divider ? - adf4351_regs_t::CLOCK_DIV_MODE_RESYNC_ENABLE : - adf4351_regs_t::CLOCK_DIV_MODE_FAST_LOCK; - regs.prescaler = prescaler; - regs.r_counter_10_bit = tuning_settings.r_counter_10_bit; - regs.reference_divide_by_2 = tuning_settings.r_divide_by_2_en ? - adf4351_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED : - adf4351_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED; - regs.reference_doubler = tuning_settings.r_doubler_en ? - adf4351_regs_t::REFERENCE_DOUBLER_ENABLED : - adf4351_regs_t::REFERENCE_DOUBLER_DISABLED; - regs.band_select_clock_div = tuning_settings.band_select_clock_div; - UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(tuning_settings.rf_divider)); - regs.rf_divider_select = rfdivsel_to_enum[tuning_settings.rf_divider]; - regs.ldf = is_int_n ? - adf4351_regs_t::LDF_INT_N : - adf4351_regs_t::LDF_FRAC_N; - - //reset the N and R counter - regs.counter_reset = adf4351_regs_t::COUNTER_RESET_ENABLED; - self_base->get_iface()->write_spi(unit, spi_config_t::EDGE_RISE, regs.get_reg(2), 32); - regs.counter_reset = adf4351_regs_t::COUNTER_RESET_DISABLED; - - //write the registers - //correct power-up sequence to write registers (5, 4, 3, 2, 1, 0) - int addr; - - boost::uint16_t rx_id = self_base->get_rx_id().to_uint16(); - std::string board_name = (rx_id == 0x0081) ? "WBX-120" : "WBX"; - for(addr=5; addr>=0; addr--){ - UHD_LOGV(often) << boost::format( - "%s SPI Reg (0x%02x): 0x%08x" - ) % board_name.c_str() % addr % regs.get_reg(addr) << std::endl; - self_base->get_iface()->write_spi( - unit, spi_config_t::EDGE_RISE, - regs.get_reg(addr), 32 - ); + if (unit == dboard_iface::UNIT_RX) { + lo_iface->set_output_power((actual_freq == wbx_rx_lo_5dbm.clip(actual_freq)) ? + adf435x_iface::OUTPUT_POWER_5DBM : adf435x_iface::OUTPUT_POWER_2DBM); + } else { + lo_iface->set_output_power((actual_freq == wbx_tx_lo_5dbm.clip(actual_freq)) ? + adf435x_iface::OUTPUT_POWER_5DBM : adf435x_iface::OUTPUT_POWER_M1DBM); } - //return the actual frequency - UHD_LOGV(often) << boost::format( - "%s tune: actual frequency %f MHz" - ) % board_name.c_str() % (actual_freq/1e6) << std::endl; + //Write to hardware + lo_iface->commit(); return actual_freq; } diff --git a/host/lib/usrp/dboard/db_xcvr2450.cpp b/host/lib/usrp/dboard/db_xcvr2450.cpp index 50c67991a..4a3f69f69 100644 --- a/host/lib/usrp/dboard/db_xcvr2450.cpp +++ b/host/lib/usrp/dboard/db_xcvr2450.cpp @@ -112,7 +112,7 @@ static const uhd::dict<std::string, gain_range_t> xcvr_rx_gain_ranges = map_list class xcvr2450 : public xcvr_dboard_base{ public: xcvr2450(ctor_args_t args); - ~xcvr2450(void); + virtual ~xcvr2450(void); private: double _lo_freq; @@ -231,23 +231,23 @@ xcvr2450::xcvr2450(ctor_args_t args) : xcvr_dboard_base(args){ this->get_rx_subtree()->create<std::string>("name") .set("XCVR2450 RX"); this->get_rx_subtree()->create<sensor_value_t>("sensors/lo_locked") - .publish(boost::bind(&xcvr2450::get_locked, this)); + .set_publisher(boost::bind(&xcvr2450::get_locked, this)); this->get_rx_subtree()->create<sensor_value_t>("sensors/rssi") - .publish(boost::bind(&xcvr2450::get_rssi, this)); + .set_publisher(boost::bind(&xcvr2450::get_rssi, this)); BOOST_FOREACH(const std::string &name, xcvr_rx_gain_ranges.keys()){ this->get_rx_subtree()->create<double>("gains/"+name+"/value") - .coerce(boost::bind(&xcvr2450::set_rx_gain, this, _1, name)) + .set_coercer(boost::bind(&xcvr2450::set_rx_gain, this, _1, name)) .set(xcvr_rx_gain_ranges[name].start()); this->get_rx_subtree()->create<meta_range_t>("gains/"+name+"/range") .set(xcvr_rx_gain_ranges[name]); } this->get_rx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&xcvr2450::set_lo_freq, this, _1)) + .set_coercer(boost::bind(&xcvr2450::set_lo_freq, this, _1)) .set(double(2.45e9)); this->get_rx_subtree()->create<meta_range_t>("freq/range") .set(xcvr_freq_range); this->get_rx_subtree()->create<std::string>("antenna/value") - .subscribe(boost::bind(&xcvr2450::set_rx_ant, this, _1)) + .add_coerced_subscriber(boost::bind(&xcvr2450::set_rx_ant, this, _1)) .set(xcvr_antennas.at(0)); this->get_rx_subtree()->create<std::vector<std::string> >("antenna/options") .set(xcvr_antennas); @@ -258,7 +258,7 @@ xcvr2450::xcvr2450(ctor_args_t args) : xcvr_dboard_base(args){ this->get_rx_subtree()->create<bool>("use_lo_offset") .set(false); this->get_rx_subtree()->create<double>("bandwidth/value") - .coerce(boost::bind(&xcvr2450::set_rx_bandwidth, this, _1)) //complex bandpass bandwidth + .set_coercer(boost::bind(&xcvr2450::set_rx_bandwidth, this, _1)) //complex bandpass bandwidth .set(2.0*_rx_bandwidth); //_rx_bandwidth in lowpass, convert to complex bandpass this->get_rx_subtree()->create<meta_range_t>("bandwidth/range") .set(xcvr_rx_bandwidth_range); @@ -269,21 +269,21 @@ xcvr2450::xcvr2450(ctor_args_t args) : xcvr_dboard_base(args){ this->get_tx_subtree()->create<std::string>("name") .set("XCVR2450 TX"); this->get_tx_subtree()->create<sensor_value_t>("sensors/lo_locked") - .publish(boost::bind(&xcvr2450::get_locked, this)); + .set_publisher(boost::bind(&xcvr2450::get_locked, this)); BOOST_FOREACH(const std::string &name, xcvr_tx_gain_ranges.keys()){ this->get_tx_subtree()->create<double>("gains/"+name+"/value") - .coerce(boost::bind(&xcvr2450::set_tx_gain, this, _1, name)) + .set_coercer(boost::bind(&xcvr2450::set_tx_gain, this, _1, name)) .set(xcvr_tx_gain_ranges[name].start()); this->get_tx_subtree()->create<meta_range_t>("gains/"+name+"/range") .set(xcvr_tx_gain_ranges[name]); } this->get_tx_subtree()->create<double>("freq/value") - .coerce(boost::bind(&xcvr2450::set_lo_freq, this, _1)) + .set_coercer(boost::bind(&xcvr2450::set_lo_freq, this, _1)) .set(double(2.45e9)); this->get_tx_subtree()->create<meta_range_t>("freq/range") .set(xcvr_freq_range); this->get_tx_subtree()->create<std::string>("antenna/value") - .subscribe(boost::bind(&xcvr2450::set_tx_ant, this, _1)) + .add_coerced_subscriber(boost::bind(&xcvr2450::set_tx_ant, this, _1)) .set(xcvr_antennas.at(1)); this->get_tx_subtree()->create<std::vector<std::string> >("antenna/options") .set(xcvr_antennas); @@ -294,7 +294,7 @@ xcvr2450::xcvr2450(ctor_args_t args) : xcvr_dboard_base(args){ this->get_tx_subtree()->create<bool>("use_lo_offset") .set(false); this->get_tx_subtree()->create<double>("bandwidth/value") - .coerce(boost::bind(&xcvr2450::set_tx_bandwidth, this, _1)) //complex bandpass bandwidth + .set_coercer(boost::bind(&xcvr2450::set_tx_bandwidth, this, _1)) //complex bandpass bandwidth .set(2.0*_tx_bandwidth); //_tx_bandwidth in lowpass, convert to complex bandpass this->get_tx_subtree()->create<meta_range_t>("bandwidth/range") .set(xcvr_tx_bandwidth_range); @@ -315,12 +315,12 @@ xcvr2450::~xcvr2450(void){ void xcvr2450::spi_reset(void){ //spi reset mode: global enable = off, tx and rx enable = on - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, TX_ENB_TXIO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, RX_ENB_RXIO | POWER_DOWN_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE, TX_ENB_TXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, RX_ENB_RXIO | POWER_DOWN_RXIO); boost::this_thread::sleep(boost::posix_time::milliseconds(10)); //take it back out of spi reset mode and wait a bit - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, RX_DIS_RXIO | POWER_UP_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, RX_DIS_RXIO | POWER_UP_RXIO); boost::this_thread::sleep(boost::posix_time::milliseconds(10)); } @@ -337,16 +337,16 @@ void xcvr2450::update_atr(void){ int ad9515div = (_ad9515div == 3)? AD9515DIV_3_TXIO : AD9515DIV_2_TXIO; //set the tx registers - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, band_sel | ad9515div | TX_DIS_TXIO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, band_sel | ad9515div | TX_DIS_TXIO | rx_ant_sel); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, band_sel | ad9515div | TX_ENB_TXIO | tx_ant_sel); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, band_sel | ad9515div | TX_ENB_TXIO | xx_ant_sel); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE, band_sel | ad9515div | TX_DIS_TXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY, band_sel | ad9515div | TX_DIS_TXIO | rx_ant_sel); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, band_sel | ad9515div | TX_ENB_TXIO | tx_ant_sel); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, band_sel | ad9515div | TX_ENB_TXIO | xx_ant_sel); //set the rx registers - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, POWER_UP_RXIO | RX_DIS_RXIO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, POWER_UP_RXIO | RX_ENB_RXIO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, POWER_UP_RXIO | RX_DIS_RXIO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, POWER_UP_RXIO | RX_DIS_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, POWER_UP_RXIO | RX_DIS_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, POWER_UP_RXIO | RX_ENB_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, POWER_UP_RXIO | RX_DIS_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, POWER_UP_RXIO | RX_DIS_RXIO); } /*********************************************************************** diff --git a/host/lib/usrp/dboard_base.cpp b/host/lib/usrp/dboard_base.cpp index fe14c02b9..465b9e489 100644 --- a/host/lib/usrp/dboard_base.cpp +++ b/host/lib/usrp/dboard_base.cpp @@ -32,7 +32,7 @@ struct dboard_base::impl{ dboard_base::dboard_base(ctor_args_t args){ _impl = UHD_PIMPL_MAKE(impl, ()); - _impl->args = *static_cast<dboard_ctor_args_t *>(args); + _impl->args = dboard_ctor_args_t::cast(args); } std::string dboard_base::get_subdev_name(void){ diff --git a/host/lib/usrp/dboard_ctor_args.hpp b/host/lib/usrp/dboard_ctor_args.hpp index 99c071ff8..c8e4006d1 100644 --- a/host/lib/usrp/dboard_ctor_args.hpp +++ b/host/lib/usrp/dboard_ctor_args.hpp @@ -26,11 +26,17 @@ namespace uhd{ namespace usrp{ - struct dboard_ctor_args_t{ + class dboard_ctor_args_t { + public: std::string sd_name; dboard_iface::sptr db_iface; dboard_id_t rx_id, tx_id; property_tree::sptr rx_subtree, tx_subtree; + dboard_base::sptr rx_container, tx_container; + + static const dboard_ctor_args_t& cast(dboard_base::ctor_args_t args) { + return *static_cast<dboard_ctor_args_t*>(args); + } }; }} //namespace diff --git a/host/lib/usrp/dboard_iface.cpp b/host/lib/usrp/dboard_iface.cpp deleted file mode 100644 index 092e005f0..000000000 --- a/host/lib/usrp/dboard_iface.cpp +++ /dev/null @@ -1,93 +0,0 @@ -// -// Copyright 2010-2013,2015 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#include <uhd/usrp/dboard_iface.hpp> -#include <uhd/types/dict.hpp> - -using namespace uhd::usrp; - -struct dboard_iface::impl{ - uhd::dict<unit_t, boost::uint16_t> pin_ctrl_shadow; - uhd::dict<unit_t, uhd::dict<atr_reg_t, boost::uint16_t> > atr_reg_shadow; - uhd::dict<unit_t, boost::uint16_t> gpio_ddr_shadow; - uhd::dict<unit_t, boost::uint16_t> gpio_out_shadow; -}; - -dboard_iface::dboard_iface(void){ - _impl = UHD_PIMPL_MAKE(impl, ()); -} - -dboard_iface::~dboard_iface(void) -{ - //empty -} - -template <typename T> -static T shadow_it(T &shadow, const T &value, const T &mask){ - shadow = (shadow & ~mask) | (value & mask); - return shadow; -} - -void dboard_iface::set_pin_ctrl( - unit_t unit, boost::uint16_t value, boost::uint16_t mask -){ - _set_pin_ctrl(unit, shadow_it(_impl->pin_ctrl_shadow[unit], value, mask)); -} - -boost::uint16_t dboard_iface::get_pin_ctrl(unit_t unit){ - return _impl->pin_ctrl_shadow[unit]; -} - -void dboard_iface::set_atr_reg( - unit_t unit, atr_reg_t reg, boost::uint16_t value, boost::uint16_t mask -){ - _set_atr_reg(unit, reg, shadow_it(_impl->atr_reg_shadow[unit][reg], value, mask)); -} - -boost::uint16_t dboard_iface::get_atr_reg(unit_t unit, atr_reg_t reg){ - return _impl->atr_reg_shadow[unit][reg]; -} - -void dboard_iface::set_gpio_ddr( - unit_t unit, boost::uint16_t value, boost::uint16_t mask -){ - _set_gpio_ddr(unit, shadow_it(_impl->gpio_ddr_shadow[unit], value, mask)); -} - -boost::uint16_t dboard_iface::get_gpio_ddr(unit_t unit){ - return _impl->gpio_ddr_shadow[unit]; -} - -void dboard_iface::set_gpio_out( - unit_t unit, boost::uint16_t value, boost::uint16_t mask -){ - _set_gpio_out(unit, shadow_it(_impl->gpio_out_shadow[unit], value, mask)); -} - -boost::uint16_t dboard_iface::get_gpio_out(unit_t unit){ - return _impl->gpio_out_shadow[unit]; -} - -void dboard_iface::set_command_time(const uhd::time_spec_t&) -{ - throw uhd::not_implemented_error("timed command feature not implemented on this hardware"); -} - -uhd::time_spec_t dboard_iface::get_command_time() -{ - return uhd::time_spec_t(0.0); -} diff --git a/host/lib/usrp/dboard_manager.cpp b/host/lib/usrp/dboard_manager.cpp index 340c1d3f9..6099adcbb 100644 --- a/host/lib/usrp/dboard_manager.cpp +++ b/host/lib/usrp/dboard_manager.cpp @@ -37,11 +37,11 @@ using namespace uhd::usrp; **********************************************************************/ class dboard_key_t{ public: - dboard_key_t(const dboard_id_t &id = dboard_id_t::none()): - _rx_id(id), _tx_id(id), _xcvr(false){} + dboard_key_t(const dboard_id_t &id = dboard_id_t::none(), bool restricted = false): + _rx_id(id), _tx_id(id), _xcvr(false), _restricted(restricted) {} - dboard_key_t(const dboard_id_t &rx_id, const dboard_id_t &tx_id): - _rx_id(rx_id), _tx_id(tx_id), _xcvr(true){} + dboard_key_t(const dboard_id_t &rx_id, const dboard_id_t &tx_id, bool restricted = false): + _rx_id(rx_id), _tx_id(tx_id), _xcvr(true), _restricted(restricted) {} dboard_id_t xx_id(void) const{ UHD_ASSERT_THROW(not this->is_xcvr()); @@ -62,9 +62,14 @@ public: return this->_xcvr; } + bool is_restricted(void) const{ + return this->_restricted; + } + private: dboard_id_t _rx_id, _tx_id; bool _xcvr; + bool _restricted; }; bool operator==(const dboard_key_t &lhs, const dboard_key_t &rhs){ @@ -78,8 +83,8 @@ bool operator==(const dboard_key_t &lhs, const dboard_key_t &rhs){ /*********************************************************************** * storage and registering for dboards **********************************************************************/ -//dboard registry tuple: dboard constructor, canonical name, subdev names -typedef boost::tuple<dboard_manager::dboard_ctor_t, std::string, std::vector<std::string> > args_t; +//dboard registry tuple: dboard constructor, canonical name, subdev names, container constructor +typedef boost::tuple<dboard_manager::dboard_ctor_t, std::string, std::vector<std::string>, dboard_manager::dboard_ctor_t> args_t; //map a dboard id to a dboard constructor typedef uhd::dict<dboard_key_t, args_t> id_to_args_map_t; @@ -87,9 +92,10 @@ UHD_SINGLETON_FCN(id_to_args_map_t, get_id_to_args_map) static void register_dboard_key( const dboard_key_t &dboard_key, - dboard_manager::dboard_ctor_t dboard_ctor, + dboard_manager::dboard_ctor_t db_subdev_ctor, const std::string &name, - const std::vector<std::string> &subdev_names + const std::vector<std::string> &subdev_names, + dboard_manager::dboard_ctor_t db_container_ctor ){ UHD_LOGV(always) << "registering: " << name << std::endl; if (get_id_to_args_map().has_key(dboard_key)){ @@ -103,26 +109,49 @@ static void register_dboard_key( ) % dboard_key.xx_id().to_string() % get_id_to_args_map()[dboard_key].get<1>())); } - get_id_to_args_map()[dboard_key] = args_t(dboard_ctor, name, subdev_names); + get_id_to_args_map()[dboard_key] = args_t(db_subdev_ctor, name, subdev_names, db_container_ctor); } void dboard_manager::register_dboard( const dboard_id_t &dboard_id, - dboard_ctor_t dboard_ctor, + dboard_ctor_t db_subdev_ctor, const std::string &name, - const std::vector<std::string> &subdev_names + const std::vector<std::string> &subdev_names, + dboard_ctor_t db_container_ctor ){ - register_dboard_key(dboard_key_t(dboard_id), dboard_ctor, name, subdev_names); + register_dboard_key(dboard_key_t(dboard_id), db_subdev_ctor, name, subdev_names, db_container_ctor); } void dboard_manager::register_dboard( const dboard_id_t &rx_dboard_id, const dboard_id_t &tx_dboard_id, - dboard_ctor_t dboard_ctor, + dboard_ctor_t db_subdev_ctor, + const std::string &name, + const std::vector<std::string> &subdev_names, + dboard_ctor_t db_container_ctor +){ + register_dboard_key(dboard_key_t(rx_dboard_id, tx_dboard_id), db_subdev_ctor, name, subdev_names, db_container_ctor); +} + +void dboard_manager::register_dboard_restricted( + const dboard_id_t &dboard_id, + dboard_ctor_t db_subdev_ctor, + const std::string &name, + const std::vector<std::string> &subdev_names, + dboard_ctor_t db_container_ctor +){ + register_dboard_key(dboard_key_t(dboard_id, true), db_subdev_ctor, name, subdev_names, db_container_ctor); +} + +void dboard_manager::register_dboard_restricted( + const dboard_id_t &rx_dboard_id, + const dboard_id_t &tx_dboard_id, + dboard_ctor_t db_subdev_ctor, const std::string &name, - const std::vector<std::string> &subdev_names + const std::vector<std::string> &subdev_names, + dboard_ctor_t db_container_ctor ){ - register_dboard_key(dboard_key_t(rx_dboard_id, tx_dboard_id), dboard_ctor, name, subdev_names); + register_dboard_key(dboard_key_t(rx_dboard_id, tx_dboard_id, true), db_subdev_ctor, name, subdev_names, db_container_ctor); } std::string dboard_id_t::to_cname(void) const{ @@ -155,7 +184,15 @@ public: dboard_iface::sptr iface, property_tree::sptr subtree ); - ~dboard_manager_impl(void); + virtual ~dboard_manager_impl(void); + + inline const std::vector<std::string>& get_rx_frontends() const { + return _rx_frontends; + } + + inline const std::vector<std::string>& get_tx_frontends() const { + return _tx_frontends; + } private: void init(dboard_id_t, dboard_id_t, property_tree::sptr); @@ -164,6 +201,8 @@ private: //the subdevice proxy is internal to the cpp file uhd::dict<std::string, dboard_base::sptr> _rx_dboards; uhd::dict<std::string, dboard_base::sptr> _tx_dboards; + std::vector<std::string> _rx_frontends; + std::vector<std::string> _tx_frontends; dboard_iface::sptr _iface; void set_nice_dboard_if(void); }; @@ -210,6 +249,7 @@ dboard_manager_impl::dboard_manager_impl( //clean up the stuff added by the call above if (subtree->exists("rx_frontends")) subtree->remove("rx_frontends"); if (subtree->exists("tx_frontends")) subtree->remove("tx_frontends"); + if (subtree->exists("iface")) subtree->remove("iface"); this->init(dboard_id_t::none(), dboard_id_t::none(), subtree); } } @@ -244,6 +284,11 @@ void dboard_manager_impl::init( //initialize the gpio pins before creating subdevs set_nice_dboard_if(); + //conditionally register the dboard iface in the tree + if (not (rx_dboard_key.is_restricted() or tx_dboard_key.is_restricted() or xcvr_dboard_key.is_restricted())) { + subtree->create<dboard_iface::sptr>("iface").set(_iface); + } + //dboard constructor args dboard_ctor_args_t db_ctor_args; db_ctor_args.db_iface = _iface; @@ -252,42 +297,81 @@ void dboard_manager_impl::init( if (xcvr_dboard_key.is_xcvr()){ //extract data for the xcvr dboard key - dboard_ctor_t dboard_ctor; std::string name; std::vector<std::string> subdevs; - boost::tie(dboard_ctor, name, subdevs) = get_id_to_args_map()[xcvr_dboard_key]; + dboard_ctor_t subdev_ctor; std::string name; std::vector<std::string> subdevs; dboard_ctor_t container_ctor; + boost::tie(subdev_ctor, name, subdevs, container_ctor) = get_id_to_args_map()[xcvr_dboard_key]; + + //create the container class. + //a container class exists per N subdevs registered in a register_dboard* call + db_ctor_args.sd_name = "common"; + db_ctor_args.rx_id = rx_dboard_id; + db_ctor_args.tx_id = tx_dboard_id; + db_ctor_args.rx_subtree = subtree->subtree("rx_frontends/" + db_ctor_args.sd_name); + db_ctor_args.tx_subtree = subtree->subtree("tx_frontends/" + db_ctor_args.sd_name); + if (container_ctor) { + db_ctor_args.rx_container = container_ctor(&db_ctor_args); + } else { + db_ctor_args.rx_container = dboard_base::sptr(); + } + db_ctor_args.tx_container = db_ctor_args.rx_container; //Same TX and RX container //create the xcvr object for each subdevice BOOST_FOREACH(const std::string &subdev, subdevs){ db_ctor_args.sd_name = subdev; - db_ctor_args.rx_id = rx_dboard_id; - db_ctor_args.tx_id = tx_dboard_id; - db_ctor_args.rx_subtree = subtree->subtree("rx_frontends/" + subdev); - db_ctor_args.tx_subtree = subtree->subtree("tx_frontends/" + subdev); - dboard_base::sptr xcvr_dboard = dboard_ctor(&db_ctor_args); + db_ctor_args.rx_subtree = subtree->subtree("rx_frontends/" + db_ctor_args.sd_name); + db_ctor_args.tx_subtree = subtree->subtree("tx_frontends/" + db_ctor_args.sd_name); + dboard_base::sptr xcvr_dboard = subdev_ctor(&db_ctor_args); _rx_dboards[subdev] = xcvr_dboard; _tx_dboards[subdev] = xcvr_dboard; + xcvr_dboard->initialize(); } + + //initialize the container after all subdevs have been created + if (container_ctor) { + db_ctor_args.rx_container->initialize(); + } + + //Populate frontend names in-order. + //We cannot use _xx_dboards.keys() here because of the ordering requirement + _rx_frontends = subdevs; + _tx_frontends = subdevs; } //make tx and rx subdevs (separate subdevs for rx and tx dboards) - else{ - + else + { //force the rx key to the unknown board for bad combinations if (rx_dboard_key.is_xcvr() or rx_dboard_key.xx_id() == dboard_id_t::none()){ rx_dboard_key = dboard_key_t(0xfff1); } //extract data for the rx dboard key - dboard_ctor_t rx_dboard_ctor; std::string rx_name; std::vector<std::string> rx_subdevs; - boost::tie(rx_dboard_ctor, rx_name, rx_subdevs) = get_id_to_args_map()[rx_dboard_key]; + dboard_ctor_t rx_dboard_ctor; std::string rx_name; std::vector<std::string> rx_subdevs; dboard_ctor_t rx_cont_ctor; + boost::tie(rx_dboard_ctor, rx_name, rx_subdevs, rx_cont_ctor) = get_id_to_args_map()[rx_dboard_key]; + + //create the container class. + //a container class exists per N subdevs registered in a register_dboard* call + db_ctor_args.sd_name = "common"; + db_ctor_args.rx_id = rx_dboard_id; + db_ctor_args.tx_id = dboard_id_t::none(); + db_ctor_args.rx_subtree = subtree->subtree("rx_frontends/" + db_ctor_args.sd_name); + db_ctor_args.tx_subtree = property_tree::sptr(); + if (rx_cont_ctor) { + db_ctor_args.rx_container = rx_cont_ctor(&db_ctor_args); + } else { + db_ctor_args.rx_container = dboard_base::sptr(); + } //make the rx subdevs BOOST_FOREACH(const std::string &subdev, rx_subdevs){ db_ctor_args.sd_name = subdev; - db_ctor_args.rx_id = rx_dboard_id; - db_ctor_args.tx_id = dboard_id_t::none(); - db_ctor_args.rx_subtree = subtree->subtree("rx_frontends/" + subdev); - db_ctor_args.tx_subtree = property_tree::sptr(); //null + db_ctor_args.rx_subtree = subtree->subtree("rx_frontends/" + db_ctor_args.sd_name); _rx_dboards[subdev] = rx_dboard_ctor(&db_ctor_args); + _rx_dboards[subdev]->initialize(); + } + + //initialize the container after all subdevs have been created + if (rx_cont_ctor) { + db_ctor_args.rx_container->initialize(); } //force the tx key to the unknown board for bad combinations @@ -296,18 +380,39 @@ void dboard_manager_impl::init( } //extract data for the tx dboard key - dboard_ctor_t tx_dboard_ctor; std::string tx_name; std::vector<std::string> tx_subdevs; - boost::tie(tx_dboard_ctor, tx_name, tx_subdevs) = get_id_to_args_map()[tx_dboard_key]; + dboard_ctor_t tx_dboard_ctor; std::string tx_name; std::vector<std::string> tx_subdevs; dboard_ctor_t tx_cont_ctor; + boost::tie(tx_dboard_ctor, tx_name, tx_subdevs, tx_cont_ctor) = get_id_to_args_map()[tx_dboard_key]; + + //create the container class. + //a container class exists per N subdevs registered in a register_dboard* call + db_ctor_args.sd_name = "common"; + db_ctor_args.rx_id = dboard_id_t::none(); + db_ctor_args.tx_id = tx_dboard_id; + db_ctor_args.rx_subtree = property_tree::sptr(); + db_ctor_args.tx_subtree = subtree->subtree("tx_frontends/" + db_ctor_args.sd_name); + if (tx_cont_ctor) { + db_ctor_args.tx_container = tx_cont_ctor(&db_ctor_args); + } else { + db_ctor_args.tx_container = dboard_base::sptr(); + } //make the tx subdevs BOOST_FOREACH(const std::string &subdev, tx_subdevs){ db_ctor_args.sd_name = subdev; - db_ctor_args.rx_id = dboard_id_t::none(); - db_ctor_args.tx_id = tx_dboard_id; - db_ctor_args.rx_subtree = property_tree::sptr(); //null - db_ctor_args.tx_subtree = subtree->subtree("tx_frontends/" + subdev); + db_ctor_args.tx_subtree = subtree->subtree("tx_frontends/" + db_ctor_args.sd_name); _tx_dboards[subdev] = tx_dboard_ctor(&db_ctor_args); + _tx_dboards[subdev]->initialize(); } + + //initialize the container after all subdevs have been created + if (tx_cont_ctor) { + db_ctor_args.tx_container->initialize(); + } + + //Populate frontend names in-order. + //We cannot use _xx_dboards.keys() here because of the ordering requirement + _rx_frontends = rx_subdevs; + _tx_frontends = tx_subdevs; } } diff --git a/host/lib/usrp/e100/CMakeLists.txt b/host/lib/usrp/e100/CMakeLists.txt index 2a1e14eab..da77b85dc 100644 --- a/host/lib/usrp/e100/CMakeLists.txt +++ b/host/lib/usrp/e100/CMakeLists.txt @@ -22,8 +22,6 @@ ######################################################################## # Conditionally configure the USRP-E100 support ######################################################################## -LIBUHD_REGISTER_COMPONENT("E100" ENABLE_E100 OFF "ENABLE_LIBUHD;LINUX" OFF OFF) - IF(ENABLE_E100) INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}/include) diff --git a/host/lib/usrp/e100/dboard_iface.cpp b/host/lib/usrp/e100/dboard_iface.cpp index b5baf6c56..faa0ff7d4 100644 --- a/host/lib/usrp/e100/dboard_iface.cpp +++ b/host/lib/usrp/e100/dboard_iface.cpp @@ -66,12 +66,16 @@ public: void write_aux_dac(unit_t, aux_dac_t, double); double read_aux_adc(unit_t, aux_adc_t); - void _set_pin_ctrl(unit_t, boost::uint16_t); - void _set_atr_reg(unit_t, atr_reg_t, boost::uint16_t); - void _set_gpio_ddr(unit_t, boost::uint16_t); - void _set_gpio_out(unit_t, boost::uint16_t); - void set_gpio_debug(unit_t, int); - boost::uint16_t read_gpio(unit_t); + void set_pin_ctrl(unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_pin_ctrl(unit_t unit); + void set_atr_reg(unit_t unit, atr_reg_t reg, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_atr_reg(unit_t unit, atr_reg_t reg); + void set_gpio_ddr(unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_gpio_ddr(unit_t unit); + void set_gpio_out(unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_gpio_out(unit_t unit); + boost::uint32_t read_gpio(unit_t unit); + void set_command_time(const uhd::time_spec_t& t); uhd::time_spec_t get_command_time(void); @@ -97,6 +101,7 @@ public: double get_clock_rate(unit_t); void set_clock_enabled(unit_t, bool); double get_codec_rate(unit_t); + void set_fe_connection(unit_t unit, const fe_connection_t& fe_conn); private: timed_wb_iface::sptr _wb_iface; @@ -127,6 +132,7 @@ void e100_dboard_iface::set_clock_rate(unit_t unit, double rate){ switch(unit){ case UNIT_RX: return _clock->set_rx_dboard_clock_rate(rate); case UNIT_TX: return _clock->set_tx_dboard_clock_rate(rate); + case UNIT_BOTH: set_clock_rate(UNIT_RX, rate); set_clock_rate(UNIT_TX, rate); return; } } @@ -142,14 +148,15 @@ double e100_dboard_iface::get_clock_rate(unit_t unit){ switch(unit){ case UNIT_RX: return _clock->get_rx_clock_rate(); case UNIT_TX: return _clock->get_tx_clock_rate(); + default: UHD_THROW_INVALID_CODE_PATH(); } - UHD_THROW_INVALID_CODE_PATH(); } void e100_dboard_iface::set_clock_enabled(unit_t unit, bool enb){ switch(unit){ case UNIT_RX: return _clock->enable_rx_dboard_clock(enb); case UNIT_TX: return _clock->enable_tx_dboard_clock(enb); + case UNIT_BOTH: set_clock_enabled(UNIT_RX, enb); set_clock_enabled(UNIT_TX, enb); return; } } @@ -160,28 +167,40 @@ double e100_dboard_iface::get_codec_rate(unit_t){ /*********************************************************************** * GPIO **********************************************************************/ -void e100_dboard_iface::_set_pin_ctrl(unit_t unit, boost::uint16_t value){ - return _gpio->set_pin_ctrl(unit, value); +void e100_dboard_iface::set_pin_ctrl(unit_t unit, boost::uint32_t value, boost::uint32_t mask){ + _gpio->set_pin_ctrl(unit, static_cast<boost::uint16_t>(value), static_cast<boost::uint16_t>(mask)); } -void e100_dboard_iface::_set_gpio_ddr(unit_t unit, boost::uint16_t value){ - return _gpio->set_gpio_ddr(unit, value); +boost::uint32_t e100_dboard_iface::get_pin_ctrl(unit_t unit){ + return static_cast<boost::uint32_t>(_gpio->get_pin_ctrl(unit)); } -void e100_dboard_iface::_set_gpio_out(unit_t unit, boost::uint16_t value){ - return _gpio->set_gpio_out(unit, value); +void e100_dboard_iface::set_atr_reg(unit_t unit, atr_reg_t reg, boost::uint32_t value, boost::uint32_t mask){ + _gpio->set_atr_reg(unit, reg, static_cast<boost::uint16_t>(value), static_cast<boost::uint16_t>(mask)); } -boost::uint16_t e100_dboard_iface::read_gpio(unit_t unit){ - return _gpio->read_gpio(unit); +boost::uint32_t e100_dboard_iface::get_atr_reg(unit_t unit, atr_reg_t reg){ + return static_cast<boost::uint32_t>(_gpio->get_atr_reg(unit, reg)); +} + +void e100_dboard_iface::set_gpio_ddr(unit_t unit, boost::uint32_t value, boost::uint32_t mask){ + _gpio->set_gpio_ddr(unit, static_cast<boost::uint16_t>(value), static_cast<boost::uint16_t>(mask)); +} + +boost::uint32_t e100_dboard_iface::get_gpio_ddr(unit_t unit){ + return static_cast<boost::uint32_t>(_gpio->get_gpio_ddr(unit)); } -void e100_dboard_iface::_set_atr_reg(unit_t unit, atr_reg_t atr, boost::uint16_t value){ - return _gpio->set_atr_reg(unit, atr, value); +void e100_dboard_iface::set_gpio_out(unit_t unit, boost::uint32_t value, boost::uint32_t mask){ + _gpio->set_gpio_out(unit, static_cast<boost::uint16_t>(value), static_cast<boost::uint16_t>(mask)); } -void e100_dboard_iface::set_gpio_debug(unit_t, int){ - throw uhd::not_implemented_error("no set_gpio_debug implemented"); +boost::uint32_t e100_dboard_iface::get_gpio_out(unit_t unit){ + return static_cast<boost::uint32_t>(_gpio->get_gpio_out(unit)); +} + +boost::uint32_t e100_dboard_iface::read_gpio(unit_t unit){ + return _gpio->read_gpio(unit); } /*********************************************************************** @@ -196,8 +215,8 @@ static boost::uint32_t unit_to_otw_spi_dev(dboard_iface::unit_t unit){ switch(unit){ case dboard_iface::UNIT_TX: return UE_SPI_SS_TX_DB; case dboard_iface::UNIT_RX: return UE_SPI_SS_RX_DB; + default: UHD_THROW_INVALID_CODE_PATH(); } - UHD_THROW_INVALID_CODE_PATH(); } void e100_dboard_iface::write_spi( @@ -268,3 +287,8 @@ void e100_dboard_iface::set_command_time(const uhd::time_spec_t& t) { _wb_iface->set_time(t); } + +void e100_dboard_iface::set_fe_connection(unit_t, const fe_connection_t&) +{ + throw uhd::not_implemented_error("fe connection configuration support not implemented"); +} diff --git a/host/lib/usrp/e100/e100_impl.cpp b/host/lib/usrp/e100/e100_impl.cpp index 6d3c08534..1f8fe84cb 100644 --- a/host/lib/usrp/e100/e100_impl.cpp +++ b/host/lib/usrp/e100/e100_impl.cpp @@ -217,20 +217,20 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ //////////////////////////////////////////////////////////////////// _tree->create<mboard_eeprom_t>(mb_path / "eeprom") .set(mb_eeprom) - .subscribe(boost::bind(&e100_impl::set_mb_eeprom, this, _1)); + .add_coerced_subscriber(boost::bind(&e100_impl::set_mb_eeprom, this, _1)); //////////////////////////////////////////////////////////////////// // create clock control objects //////////////////////////////////////////////////////////////////// //^^^ clock created up top, just reg props here... ^^^ _tree->create<double>(mb_path / "tick_rate") - .publish(boost::bind(&e100_clock_ctrl::get_fpga_clock_rate, _clock_ctrl)) - .subscribe(boost::bind(&fifo_ctrl_excelsior::set_tick_rate, _fifo_ctrl, _1)) - .subscribe(boost::bind(&e100_impl::update_tick_rate, this, _1)); + .set_publisher(boost::bind(&e100_clock_ctrl::get_fpga_clock_rate, _clock_ctrl)) + .add_coerced_subscriber(boost::bind(&fifo_ctrl_excelsior::set_tick_rate, _fifo_ctrl, _1)) + .add_coerced_subscriber(boost::bind(&e100_impl::update_tick_rate, this, _1)); - //subscribe the command time while we are at it + //add_coerced_subscriber the command time while we are at it _tree->create<time_spec_t>(mb_path / "time/cmd") - .subscribe(boost::bind(&fifo_ctrl_excelsior::set_time, _fifo_ctrl, _1)); + .add_coerced_subscriber(boost::bind(&fifo_ctrl_excelsior::set_time, _fifo_ctrl, _1)); //////////////////////////////////////////////////////////////////// // create codec control objects @@ -241,18 +241,18 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ _tree->create<std::string>(rx_codec_path / "name").set("ad9522"); _tree->create<meta_range_t>(rx_codec_path / "gains/pga/range").set(e100_codec_ctrl::rx_pga_gain_range); _tree->create<double>(rx_codec_path / "gains/pga/value") - .coerce(boost::bind(&e100_impl::update_rx_codec_gain, this, _1)); + .set_coercer(boost::bind(&e100_impl::update_rx_codec_gain, this, _1)); _tree->create<std::string>(tx_codec_path / "name").set("ad9522"); _tree->create<meta_range_t>(tx_codec_path / "gains/pga/range").set(e100_codec_ctrl::tx_pga_gain_range); _tree->create<double>(tx_codec_path / "gains/pga/value") - .subscribe(boost::bind(&e100_codec_ctrl::set_tx_pga_gain, _codec_ctrl, _1)) - .publish(boost::bind(&e100_codec_ctrl::get_tx_pga_gain, _codec_ctrl)); + .add_coerced_subscriber(boost::bind(&e100_codec_ctrl::set_tx_pga_gain, _codec_ctrl, _1)) + .set_publisher(boost::bind(&e100_codec_ctrl::get_tx_pga_gain, _codec_ctrl)); //////////////////////////////////////////////////////////////////// // and do the misc mboard sensors //////////////////////////////////////////////////////////////////// _tree->create<sensor_value_t>(mb_path / "sensors/ref_locked") - .publish(boost::bind(&e100_impl::get_ref_locked, this)); + .set_publisher(boost::bind(&e100_impl::get_ref_locked, this)); //////////////////////////////////////////////////////////////////// // Create the GPSDO control @@ -272,7 +272,7 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ BOOST_FOREACH(const std::string &name, _gps->get_sensors()) { _tree->create<sensor_value_t>(mb_path / "sensors" / name) - .publish(boost::bind(&gps_ctrl::get_sensor, _gps, name)); + .set_publisher(boost::bind(&gps_ctrl::get_sensor, _gps, name)); } } else @@ -288,27 +288,27 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ _tx_fe = tx_frontend_core_200::make(_fifo_ctrl, TOREG(SR_TX_FE)); _tree->create<subdev_spec_t>(mb_path / "rx_subdev_spec") - .subscribe(boost::bind(&e100_impl::update_rx_subdev_spec, this, _1)); + .add_coerced_subscriber(boost::bind(&e100_impl::update_rx_subdev_spec, this, _1)); _tree->create<subdev_spec_t>(mb_path / "tx_subdev_spec") - .subscribe(boost::bind(&e100_impl::update_tx_subdev_spec, this, _1)); + .add_coerced_subscriber(boost::bind(&e100_impl::update_tx_subdev_spec, this, _1)); const fs_path rx_fe_path = mb_path / "rx_frontends" / "A"; const fs_path tx_fe_path = mb_path / "tx_frontends" / "A"; _tree->create<std::complex<double> >(rx_fe_path / "dc_offset" / "value") - .coerce(boost::bind(&rx_frontend_core_200::set_dc_offset, _rx_fe, _1)) + .set_coercer(boost::bind(&rx_frontend_core_200::set_dc_offset, _rx_fe, _1)) .set(std::complex<double>(0.0, 0.0)); _tree->create<bool>(rx_fe_path / "dc_offset" / "enable") - .subscribe(boost::bind(&rx_frontend_core_200::set_dc_offset_auto, _rx_fe, _1)) + .add_coerced_subscriber(boost::bind(&rx_frontend_core_200::set_dc_offset_auto, _rx_fe, _1)) .set(true); _tree->create<std::complex<double> >(rx_fe_path / "iq_balance" / "value") - .subscribe(boost::bind(&rx_frontend_core_200::set_iq_balance, _rx_fe, _1)) + .add_coerced_subscriber(boost::bind(&rx_frontend_core_200::set_iq_balance, _rx_fe, _1)) .set(std::complex<double>(0.0, 0.0)); _tree->create<std::complex<double> >(tx_fe_path / "dc_offset" / "value") - .coerce(boost::bind(&tx_frontend_core_200::set_dc_offset, _tx_fe, _1)) + .set_coercer(boost::bind(&tx_frontend_core_200::set_dc_offset, _tx_fe, _1)) .set(std::complex<double>(0.0, 0.0)); _tree->create<std::complex<double> >(tx_fe_path / "iq_balance" / "value") - .subscribe(boost::bind(&tx_frontend_core_200::set_iq_balance, _tx_fe, _1)) + .add_coerced_subscriber(boost::bind(&tx_frontend_core_200::set_iq_balance, _tx_fe, _1)) .set(std::complex<double>(0.0, 0.0)); //////////////////////////////////////////////////////////////////// @@ -327,20 +327,20 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ _rx_dsps[dspno]->set_link_rate(E100_RX_LINK_RATE_BPS); _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&rx_dsp_core_200::set_tick_rate, _rx_dsps[dspno], _1)); + .add_coerced_subscriber(boost::bind(&rx_dsp_core_200::set_tick_rate, _rx_dsps[dspno], _1)); fs_path rx_dsp_path = mb_path / str(boost::format("rx_dsps/%u") % dspno); _tree->create<meta_range_t>(rx_dsp_path / "rate/range") - .publish(boost::bind(&rx_dsp_core_200::get_host_rates, _rx_dsps[dspno])); + .set_publisher(boost::bind(&rx_dsp_core_200::get_host_rates, _rx_dsps[dspno])); _tree->create<double>(rx_dsp_path / "rate/value") .set(1e6) //some default - .coerce(boost::bind(&rx_dsp_core_200::set_host_rate, _rx_dsps[dspno], _1)) - .subscribe(boost::bind(&e100_impl::update_rx_samp_rate, this, dspno, _1)); + .set_coercer(boost::bind(&rx_dsp_core_200::set_host_rate, _rx_dsps[dspno], _1)) + .add_coerced_subscriber(boost::bind(&e100_impl::update_rx_samp_rate, this, dspno, _1)); _tree->create<double>(rx_dsp_path / "freq/value") - .coerce(boost::bind(&rx_dsp_core_200::set_freq, _rx_dsps[dspno], _1)); + .set_coercer(boost::bind(&rx_dsp_core_200::set_freq, _rx_dsps[dspno], _1)); _tree->create<meta_range_t>(rx_dsp_path / "freq/range") - .publish(boost::bind(&rx_dsp_core_200::get_freq_range, _rx_dsps[dspno])); + .set_publisher(boost::bind(&rx_dsp_core_200::get_freq_range, _rx_dsps[dspno])); _tree->create<stream_cmd_t>(rx_dsp_path / "stream_cmd") - .subscribe(boost::bind(&rx_dsp_core_200::issue_stream_command, _rx_dsps[dspno], _1)); + .add_coerced_subscriber(boost::bind(&rx_dsp_core_200::issue_stream_command, _rx_dsps[dspno], _1)); } //////////////////////////////////////////////////////////////////// @@ -351,17 +351,17 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ ); _tx_dsp->set_link_rate(E100_TX_LINK_RATE_BPS); _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&tx_dsp_core_200::set_tick_rate, _tx_dsp, _1)); + .add_coerced_subscriber(boost::bind(&tx_dsp_core_200::set_tick_rate, _tx_dsp, _1)); _tree->create<meta_range_t>(mb_path / "tx_dsps/0/rate/range") - .publish(boost::bind(&tx_dsp_core_200::get_host_rates, _tx_dsp)); + .set_publisher(boost::bind(&tx_dsp_core_200::get_host_rates, _tx_dsp)); _tree->create<double>(mb_path / "tx_dsps/0/rate/value") .set(1e6) //some default - .coerce(boost::bind(&tx_dsp_core_200::set_host_rate, _tx_dsp, _1)) - .subscribe(boost::bind(&e100_impl::update_tx_samp_rate, this, 0, _1)); + .set_coercer(boost::bind(&tx_dsp_core_200::set_host_rate, _tx_dsp, _1)) + .add_coerced_subscriber(boost::bind(&e100_impl::update_tx_samp_rate, this, 0, _1)); _tree->create<double>(mb_path / "tx_dsps/0/freq/value") - .coerce(boost::bind(&tx_dsp_core_200::set_freq, _tx_dsp, _1)); + .set_coercer(boost::bind(&tx_dsp_core_200::set_freq, _tx_dsp, _1)); _tree->create<meta_range_t>(mb_path / "tx_dsps/0/freq/range") - .publish(boost::bind(&tx_dsp_core_200::get_freq_range, _tx_dsp)); + .set_publisher(boost::bind(&tx_dsp_core_200::get_freq_range, _tx_dsp)); //////////////////////////////////////////////////////////////////// // create time control objects @@ -375,21 +375,21 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ _fifo_ctrl, TOREG(SR_TIME64), time64_rb_bases ); _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&time64_core_200::set_tick_rate, _time64, _1)); + .add_coerced_subscriber(boost::bind(&time64_core_200::set_tick_rate, _time64, _1)); _tree->create<time_spec_t>(mb_path / "time/now") - .publish(boost::bind(&time64_core_200::get_time_now, _time64)) - .subscribe(boost::bind(&time64_core_200::set_time_now, _time64, _1)); + .set_publisher(boost::bind(&time64_core_200::get_time_now, _time64)) + .add_coerced_subscriber(boost::bind(&time64_core_200::set_time_now, _time64, _1)); _tree->create<time_spec_t>(mb_path / "time/pps") - .publish(boost::bind(&time64_core_200::get_time_last_pps, _time64)) - .subscribe(boost::bind(&time64_core_200::set_time_next_pps, _time64, _1)); + .set_publisher(boost::bind(&time64_core_200::get_time_last_pps, _time64)) + .add_coerced_subscriber(boost::bind(&time64_core_200::set_time_next_pps, _time64, _1)); //setup time source props _tree->create<std::string>(mb_path / "time_source/value") - .subscribe(boost::bind(&time64_core_200::set_time_source, _time64, _1)); + .add_coerced_subscriber(boost::bind(&time64_core_200::set_time_source, _time64, _1)); _tree->create<std::vector<std::string> >(mb_path / "time_source/options") - .publish(boost::bind(&time64_core_200::get_time_sources, _time64)); + .set_publisher(boost::bind(&time64_core_200::get_time_sources, _time64)); //setup reference source props _tree->create<std::string>(mb_path / "clock_source/value") - .subscribe(boost::bind(&e100_impl::update_clock_source, this, _1)); + .add_coerced_subscriber(boost::bind(&e100_impl::update_clock_source, this, _1)); std::vector<std::string> clock_sources = boost::assign::list_of("internal")("external")("auto"); if (_gps and _gps->gps_detected()) clock_sources.push_back("gpsdo"); _tree->create<std::vector<std::string> >(mb_path / "clock_source/options").set(clock_sources); @@ -399,7 +399,7 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ //////////////////////////////////////////////////////////////////// _user = user_settings_core_200::make(_fifo_ctrl, TOREG(SR_USER_REGS)); _tree->create<user_settings_core_200::user_reg_t>(mb_path / "user/regs") - .subscribe(boost::bind(&user_settings_core_200::set_reg, _user, _1)); + .add_coerced_subscriber(boost::bind(&user_settings_core_200::set_reg, _user, _1)); //////////////////////////////////////////////////////////////////// // create dboard control objects @@ -417,32 +417,31 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ //create the properties and register subscribers _tree->create<dboard_eeprom_t>(mb_path / "dboards/A/rx_eeprom") .set(rx_db_eeprom) - .subscribe(boost::bind(&e100_impl::set_db_eeprom, this, "rx", _1)); + .add_coerced_subscriber(boost::bind(&e100_impl::set_db_eeprom, this, "rx", _1)); _tree->create<dboard_eeprom_t>(mb_path / "dboards/A/tx_eeprom") .set(tx_db_eeprom) - .subscribe(boost::bind(&e100_impl::set_db_eeprom, this, "tx", _1)); + .add_coerced_subscriber(boost::bind(&e100_impl::set_db_eeprom, this, "tx", _1)); _tree->create<dboard_eeprom_t>(mb_path / "dboards/A/gdb_eeprom") .set(gdb_eeprom) - .subscribe(boost::bind(&e100_impl::set_db_eeprom, this, "gdb", _1)); + .add_coerced_subscriber(boost::bind(&e100_impl::set_db_eeprom, this, "gdb", _1)); //create a new dboard interface and manager - _dboard_iface = make_e100_dboard_iface(_fifo_ctrl, _fpga_i2c_ctrl, _fifo_ctrl/*spi*/, _clock_ctrl, _codec_ctrl); - _tree->create<dboard_iface::sptr>(mb_path / "dboards/A/iface").set(_dboard_iface); _dboard_manager = dboard_manager::make( rx_db_eeprom.id, tx_db_eeprom.id, gdb_eeprom.id, - _dboard_iface, _tree->subtree(mb_path / "dboards/A") + make_e100_dboard_iface(_fifo_ctrl, _fpga_i2c_ctrl, _fifo_ctrl/*spi*/, _clock_ctrl, _codec_ctrl), + _tree->subtree(mb_path / "dboards/A") ); //bind frontend corrections to the dboard freq props const fs_path db_tx_fe_path = mb_path / "dboards" / "A" / "tx_frontends"; BOOST_FOREACH(const std::string &name, _tree->list(db_tx_fe_path)){ _tree->access<double>(db_tx_fe_path / name / "freq" / "value") - .subscribe(boost::bind(&e100_impl::set_tx_fe_corrections, this, _1)); + .add_coerced_subscriber(boost::bind(&e100_impl::set_tx_fe_corrections, this, _1)); } const fs_path db_rx_fe_path = mb_path / "dboards" / "A" / "rx_frontends"; BOOST_FOREACH(const std::string &name, _tree->list(db_rx_fe_path)){ _tree->access<double>(db_rx_fe_path / name / "freq" / "value") - .subscribe(boost::bind(&e100_impl::set_rx_fe_corrections, this, _1)); + .add_coerced_subscriber(boost::bind(&e100_impl::set_rx_fe_corrections, this, _1)); } //initialize io handling @@ -457,8 +456,8 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ //////////////////////////////////////////////////////////////////// this->update_rates(); - _tree->access<double>(mb_path / "tick_rate") //now subscribe the clock rate setter - .subscribe(boost::bind(&e100_clock_ctrl::set_fpga_clock_rate, _clock_ctrl, _1)); + _tree->access<double>(mb_path / "tick_rate") //now add_coerced_subscriber the clock rate setter + .add_coerced_subscriber(boost::bind(&e100_clock_ctrl::set_fpga_clock_rate, _clock_ctrl, _1)); //reset cordic rates and their properties to zero BOOST_FOREACH(const std::string &name, _tree->list(mb_path / "rx_dsps")){ diff --git a/host/lib/usrp/e100/e100_impl.hpp b/host/lib/usrp/e100/e100_impl.hpp index d00668224..b05053f84 100644 --- a/host/lib/usrp/e100/e100_impl.hpp +++ b/host/lib/usrp/e100/e100_impl.hpp @@ -111,7 +111,6 @@ private: //dboard stuff uhd::usrp::dboard_manager::sptr _dboard_manager; - uhd::usrp::dboard_iface::sptr _dboard_iface; bool _ignore_cal_file; std::vector<boost::weak_ptr<uhd::rx_streamer> > _rx_streamers; diff --git a/host/lib/usrp/e300/CMakeLists.txt b/host/lib/usrp/e300/CMakeLists.txt index 9c8aa29b9..68c3520e4 100644 --- a/host/lib/usrp/e300/CMakeLists.txt +++ b/host/lib/usrp/e300/CMakeLists.txt @@ -24,8 +24,6 @@ ######################################################################## find_package(UDev) -LIBUHD_REGISTER_COMPONENT("E300" ENABLE_E300 OFF "ENABLE_LIBUHD" OFF OFF) - IF(ENABLE_E300) LIST(APPEND E300_SOURCES ${CMAKE_CURRENT_SOURCE_DIR}/e300_impl.cpp diff --git a/host/lib/usrp/e300/e300_fpga_defs.hpp b/host/lib/usrp/e300/e300_fpga_defs.hpp index 594461518..471376337 100644 --- a/host/lib/usrp/e300/e300_fpga_defs.hpp +++ b/host/lib/usrp/e300/e300_fpga_defs.hpp @@ -21,7 +21,7 @@ namespace uhd { namespace usrp { namespace e300 { namespace fpga { static const size_t NUM_RADIOS = 2; -static const boost::uint32_t COMPAT_MAJOR = 14; +static const boost::uint32_t COMPAT_MAJOR = 15; static const boost::uint32_t COMPAT_MINOR = 0; }}}} // namespace diff --git a/host/lib/usrp/e300/e300_impl.cpp b/host/lib/usrp/e300/e300_impl.cpp index a57c86c1d..5a589a7fd 100644 --- a/host/lib/usrp/e300/e300_impl.cpp +++ b/host/lib/usrp/e300/e300_impl.cpp @@ -48,6 +48,7 @@ using namespace uhd; using namespace uhd::usrp; +using namespace uhd::usrp::gpio_atr; using namespace uhd::transport; namespace fs = boost::filesystem; namespace asio = boost::asio; @@ -470,14 +471,14 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr) BOOST_FOREACH(const std::string &name, _sensor_manager->get_sensors()) { _tree->create<sensor_value_t>(mb_path / "sensors" / name) - .publish(boost::bind(&e300_sensor_manager::get_sensor, _sensor_manager, name)); + .set_publisher(boost::bind(&e300_sensor_manager::get_sensor, _sensor_manager, name)); } #ifdef E300_GPSD if (_gps) { BOOST_FOREACH(const std::string &name, _gps->get_sensors()) { _tree->create<sensor_value_t>(mb_path / "sensors" / name) - .publish(boost::bind(&gpsd_iface::get_sensor, _gps, name)); + .set_publisher(boost::bind(&gpsd_iface::get_sensor, _gps, name)); } } #endif @@ -487,7 +488,7 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr) //////////////////////////////////////////////////////////////////// _tree->create<mboard_eeprom_t>(mb_path / "eeprom") .set(_eeprom_manager->get_mb_eeprom()) // set first... - .subscribe(boost::bind( + .add_coerced_subscriber(boost::bind( &e300_eeprom_manager::write_mb_eeprom, _eeprom_manager, _1)); @@ -495,9 +496,9 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr) // clocking //////////////////////////////////////////////////////////////////// _tree->create<double>(mb_path / "tick_rate") - .coerce(boost::bind(&e300_impl::_set_tick_rate, this, _1)) - .publish(boost::bind(&e300_impl::_get_tick_rate, this)) - .subscribe(boost::bind(&e300_impl::_update_tick_rate, this, _1)); + .set_coercer(boost::bind(&e300_impl::_set_tick_rate, this, _1)) + .set_publisher(boost::bind(&e300_impl::_get_tick_rate, this)) + .add_coerced_subscriber(boost::bind(&e300_impl::_update_tick_rate, this, _1)); //default some chains on -- needed for setup purposes _codec_ctrl->set_active_chains(true, false, true, false); @@ -517,34 +518,34 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr) //////////////////////////////////////////////////////////////////// // internal gpios //////////////////////////////////////////////////////////////////// - gpio_core_200::sptr fp_gpio = gpio_core_200::make(_radio_perifs[0].ctrl, radio::sr_addr(radio::FP_GPIO), radio::RB32_FP_GPIO); + gpio_atr_3000::sptr fp_gpio = gpio_atr_3000::make(_radio_perifs[0].ctrl, radio::sr_addr(radio::FP_GPIO), radio::RB32_FP_GPIO); BOOST_FOREACH(const gpio_attr_map_t::value_type attr, gpio_attr_map) { _tree->create<boost::uint32_t>(mb_path / "gpio" / "INT0" / attr.second) - .subscribe(boost::bind(&e300_impl::_set_internal_gpio, this, fp_gpio, attr.first, _1)) + .add_coerced_subscriber(boost::bind(&gpio_atr_3000::set_gpio_attr, fp_gpio, attr.first, _1)) .set(0); } _tree->create<boost::uint8_t>(mb_path / "gpio" / "INT0" / "READBACK") - .publish(boost::bind(&e300_impl::_get_internal_gpio, this, fp_gpio)); + .set_publisher(boost::bind(&gpio_atr_3000::read_gpio, fp_gpio)); //////////////////////////////////////////////////////////////////// // register the time keepers - only one can be the highlander //////////////////////////////////////////////////////////////////// _tree->create<time_spec_t>(mb_path / "time" / "now") - .publish(boost::bind(&time_core_3000::get_time_now, _radio_perifs[0].time64)) - .subscribe(boost::bind(&e300_impl::_set_time, this, _1)) + .set_publisher(boost::bind(&time_core_3000::get_time_now, _radio_perifs[0].time64)) + .add_coerced_subscriber(boost::bind(&e300_impl::_set_time, this, _1)) .set(0.0); //re-sync the times when the tick rate changes _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&e300_impl::_sync_times, this)); + .add_coerced_subscriber(boost::bind(&e300_impl::_sync_times, this)); _tree->create<time_spec_t>(mb_path / "time" / "pps") - .publish(boost::bind(&time_core_3000::get_time_last_pps, _radio_perifs[0].time64)) - .subscribe(boost::bind(&time_core_3000::set_time_next_pps, _radio_perifs[0].time64, _1)) - .subscribe(boost::bind(&time_core_3000::set_time_next_pps, _radio_perifs[1].time64, _1)); + .set_publisher(boost::bind(&time_core_3000::get_time_last_pps, _radio_perifs[0].time64)) + .add_coerced_subscriber(boost::bind(&time_core_3000::set_time_next_pps, _radio_perifs[0].time64, _1)) + .add_coerced_subscriber(boost::bind(&time_core_3000::set_time_next_pps, _radio_perifs[1].time64, _1)); //setup time source props _tree->create<std::string>(mb_path / "time_source" / "value") - .subscribe(boost::bind(&e300_impl::_update_time_source, this, _1)) + .add_coerced_subscriber(boost::bind(&e300_impl::_update_time_source, this, _1)) .set(e300::DEFAULT_TIME_SRC); #ifdef E300_GPSD static const std::vector<std::string> time_sources = boost::assign::list_of("none")("internal")("external")("gpsdo"); @@ -554,7 +555,7 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr) _tree->create<std::vector<std::string> >(mb_path / "time_source" / "options").set(time_sources); //setup reference source props _tree->create<std::string>(mb_path / "clock_source" / "value") - .subscribe(boost::bind(&e300_impl::_update_clock_source, this, _1)) + .add_coerced_subscriber(boost::bind(&e300_impl::_update_clock_source, this, _1)) .set(e300::DEFAULT_CLOCK_SRC); static const std::vector<std::string> clock_sources = boost::assign::list_of("internal"); //external,gpsdo not supported _tree->create<std::vector<std::string> >(mb_path / "clock_source" / "options").set(clock_sources); @@ -565,13 +566,13 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr) dboard_eeprom_t db_eeprom; _tree->create<dboard_eeprom_t>(mb_path / "dboards" / "A" / "rx_eeprom") .set(_eeprom_manager->get_db_eeprom()) - .subscribe(boost::bind( + .add_coerced_subscriber(boost::bind( &e300_eeprom_manager::write_db_eeprom, _eeprom_manager, _1)); _tree->create<dboard_eeprom_t>(mb_path / "dboards" / "A" / "tx_eeprom") .set(_eeprom_manager->get_db_eeprom()) - .subscribe(boost::bind( + .add_coerced_subscriber(boost::bind( &e300_eeprom_manager::write_db_eeprom, _eeprom_manager, _1)); @@ -604,10 +605,10 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr) _tree->create<subdev_spec_t>(mb_path / "rx_subdev_spec") .set(subdev_spec_t()) - .subscribe(boost::bind(&e300_impl::_update_subdev_spec, this, "rx", _1)); + .add_coerced_subscriber(boost::bind(&e300_impl::_update_subdev_spec, this, "rx", _1)); _tree->create<subdev_spec_t>(mb_path / "tx_subdev_spec") .set(subdev_spec_t()) - .subscribe(boost::bind(&e300_impl::_update_subdev_spec, this, "tx", _1)); + .add_coerced_subscriber(boost::bind(&e300_impl::_update_subdev_spec, this, "tx", _1)); //////////////////////////////////////////////////////////////////// // do some post-init tasks @@ -631,37 +632,6 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr) _tree->access<subdev_spec_t>(mb_path / "tx_subdev_spec").set(tx_spec); } -boost::uint8_t e300_impl::_get_internal_gpio(gpio_core_200::sptr gpio) -{ - return boost::uint32_t(gpio->read_gpio(dboard_iface::UNIT_RX)); -} - -void e300_impl::_set_internal_gpio( - gpio_core_200::sptr gpio, - const gpio_attr_t attr, - const boost::uint32_t value) -{ - switch (attr) - { - case GPIO_CTRL: - return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value); - case GPIO_DDR: - return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value); - case GPIO_OUT: - return gpio->set_gpio_out(dboard_iface::UNIT_RX, value); - case GPIO_ATR_0X: - return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value); - case GPIO_ATR_RX: - return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value); - case GPIO_ATR_TX: - return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value); - case GPIO_ATR_XX: - return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value); - default: - UHD_THROW_INVALID_CODE_PATH(); - } -} - uhd::sensor_value_t e300_impl::_get_fe_pll_lock(const bool is_tx) { const boost::uint32_t st = @@ -1001,7 +971,8 @@ void e300_impl::_setup_radio(const size_t dspno) //////////////////////////////////////////////////////////////////// // Set up peripherals //////////////////////////////////////////////////////////////////// - perif.atr = gpio_core_200_32wo::make(perif.ctrl, radio::sr_addr(radio::GPIO)); + perif.atr = gpio_atr_3000::make_write_only(perif.ctrl, radio::sr_addr(radio::GPIO)); + perif.atr->set_atr_mode(MODE_ATR, 0xFFFFFFFF); perif.rx_fe = rx_frontend_core_200::make(perif.ctrl, radio::sr_addr(radio::RX_FRONT)); perif.rx_fe->set_dc_offset(rx_frontend_core_200::DEFAULT_DC_OFFSET_VALUE); perif.rx_fe->set_dc_offset_auto(rx_frontend_core_200::DEFAULT_DC_OFFSET_ENABLE); @@ -1036,26 +1007,25 @@ void e300_impl::_setup_radio(const size_t dspno) // connect rx dsp control objects //////////////////////////////////////////////////////////////////// _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&rx_vita_core_3000::set_tick_rate, perif.framer, _1)) - .subscribe(boost::bind(&rx_dsp_core_3000::set_tick_rate, perif.ddc, _1)); + .add_coerced_subscriber(boost::bind(&rx_vita_core_3000::set_tick_rate, perif.framer, _1)) + .add_coerced_subscriber(boost::bind(&rx_dsp_core_3000::set_tick_rate, perif.ddc, _1)); const fs_path rx_dsp_path = mb_path / "rx_dsps" / str(boost::format("%u") % dspno); perif.ddc->populate_subtree(_tree->subtree(rx_dsp_path)); _tree->access<double>(rx_dsp_path / "rate" / "value") - .subscribe(boost::bind(&e300_impl::_update_rx_samp_rate, this, dspno, _1)) + .add_coerced_subscriber(boost::bind(&e300_impl::_update_rx_samp_rate, this, dspno, _1)) ; _tree->create<stream_cmd_t>(rx_dsp_path / "stream_cmd") - .subscribe(boost::bind(&rx_vita_core_3000::issue_stream_command, perif.framer, _1)); + .add_coerced_subscriber(boost::bind(&rx_vita_core_3000::issue_stream_command, perif.framer, _1)); //////////////////////////////////////////////////////////////////// // create tx dsp control objects //////////////////////////////////////////////////////////////////// _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&tx_vita_core_3000::set_tick_rate, perif.deframer, _1)) - .subscribe(boost::bind(&tx_dsp_core_3000::set_tick_rate, perif.duc, _1)); + .add_coerced_subscriber(boost::bind(&tx_dsp_core_3000::set_tick_rate, perif.duc, _1)); const fs_path tx_dsp_path = mb_path / "tx_dsps" / str(boost::format("%u") % dspno); perif.duc->populate_subtree(_tree->subtree(tx_dsp_path)); _tree->access<double>(tx_dsp_path / "rate" / "value") - .subscribe(boost::bind(&e300_impl::_update_tx_samp_rate, this, dspno, _1)) + .add_coerced_subscriber(boost::bind(&e300_impl::_update_tx_samp_rate, this, dspno, _1)) ; //////////////////////////////////////////////////////////////////// @@ -1075,10 +1045,10 @@ void e300_impl::_setup_radio(const size_t dspno) // This will connect all the e300_impl-specific items _tree->create<sensor_value_t>(rf_fe_path / "sensors" / "lo_locked") - .publish(boost::bind(&e300_impl::_get_fe_pll_lock, this, dir == TX_DIRECTION)) + .set_publisher(boost::bind(&e300_impl::_get_fe_pll_lock, this, dir == TX_DIRECTION)) ; _tree->access<double>(rf_fe_path / "freq" / "value") - .subscribe(boost::bind(&e300_impl::_update_fe_lo_freq, this, key, _1)) + .add_coerced_subscriber(boost::bind(&e300_impl::_update_fe_lo_freq, this, key, _1)) ; // Antenna Setup @@ -1086,7 +1056,7 @@ void e300_impl::_setup_radio(const size_t dspno) static const std::vector<std::string> ants = boost::assign::list_of("TX/RX")("RX2"); _tree->create<std::vector<std::string> >(rf_fe_path / "antenna" / "options").set(ants); _tree->create<std::string>(rf_fe_path / "antenna" / "value") - .subscribe(boost::bind(&e300_impl::_update_antenna_sel, this, dspno, _1)) + .add_coerced_subscriber(boost::bind(&e300_impl::_update_antenna_sel, this, dspno, _1)) .set("RX2"); } else if (dir == TX_DIRECTION) { @@ -1315,11 +1285,11 @@ void e300_impl::_update_atrs(void) if (enb_tx) fd_reg |= tx_enables | xx_leds; - gpio_core_200_32wo::sptr atr = _radio_perifs[instance].atr; - atr->set_atr_reg(dboard_iface::ATR_REG_IDLE, oo_reg); - atr->set_atr_reg(dboard_iface::ATR_REG_RX_ONLY, rx_reg); - atr->set_atr_reg(dboard_iface::ATR_REG_TX_ONLY, tx_reg); - atr->set_atr_reg(dboard_iface::ATR_REG_FULL_DUPLEX, fd_reg); + gpio_atr_3000::sptr atr = _radio_perifs[instance].atr; + atr->set_atr_reg(ATR_REG_IDLE, oo_reg); + atr->set_atr_reg(ATR_REG_RX_ONLY, rx_reg); + atr->set_atr_reg(ATR_REG_TX_ONLY, tx_reg); + atr->set_atr_reg(ATR_REG_FULL_DUPLEX, fd_reg); } } diff --git a/host/lib/usrp/e300/e300_impl.hpp b/host/lib/usrp/e300/e300_impl.hpp index 595b42679..e9a0b4b9a 100644 --- a/host/lib/usrp/e300/e300_impl.hpp +++ b/host/lib/usrp/e300/e300_impl.hpp @@ -41,7 +41,7 @@ #include "tx_dsp_core_3000.hpp" #include "ad9361_ctrl.hpp" #include "ad936x_manager.hpp" -#include "gpio_core_200.hpp" +#include "gpio_atr_3000.hpp" #include "e300_global_regs.hpp" #include "e300_i2c.hpp" @@ -147,7 +147,7 @@ private: // types struct radio_perifs_t { radio_ctrl_core_3000::sptr ctrl; - gpio_core_200_32wo::sptr atr; + gpio_atr::gpio_atr_3000::sptr atr; time_core_3000::sptr time64; rx_vita_core_3000::sptr framer; rx_dsp_core_3000::sptr ddc; @@ -283,14 +283,6 @@ private: // methods // get frontend lock sensor uhd::sensor_value_t _get_fe_pll_lock(const bool is_tx); - // internal gpios - boost::uint8_t _get_internal_gpio(gpio_core_200::sptr); - - void _set_internal_gpio( - gpio_core_200::sptr gpio, - const gpio_attr_t attr, - const boost::uint32_t value); - private: // members uhd::device_addr_t _device_addr; xport_t _xport_path; diff --git a/host/lib/usrp/e300/e300_io_impl.cpp b/host/lib/usrp/e300/e300_io_impl.cpp index 29d250c8f..c84042e98 100644 --- a/host/lib/usrp/e300/e300_io_impl.cpp +++ b/host/lib/usrp/e300/e300_io_impl.cpp @@ -87,7 +87,6 @@ void e300_impl::_update_tick_rate(const double rate) boost::dynamic_pointer_cast<sph::send_packet_streamer>(perif.tx_streamer.lock()); if (my_streamer) my_streamer->set_tick_rate(rate); - perif.deframer->set_tick_rate(_tick_rate); } } @@ -158,10 +157,8 @@ void e300_impl::_update_subdev_spec( const std::string conn = _tree->access<std::string>( mb_path / "dboards" / spec[i].db_name / ("rx_frontends") / spec[i].sd_name / "connection").get(); - - const bool fe_swapped = (conn == "QI" or conn == "Q"); - _radio_perifs[i].ddc->set_mux(conn, fe_swapped); - _radio_perifs[i].rx_fe->set_mux(fe_swapped); + _radio_perifs[i].ddc->set_mux(usrp::fe_connection_t(conn)); + _radio_perifs[i].rx_fe->set_mux(false); } } diff --git a/host/lib/usrp/e300/e300_regs.hpp b/host/lib/usrp/e300/e300_regs.hpp index 846c759a4..74e45df00 100644 --- a/host/lib/usrp/e300/e300_regs.hpp +++ b/host/lib/usrp/e300/e300_regs.hpp @@ -41,7 +41,7 @@ static const uint32_t TIME = 128; static const uint32_t RX_DSP = 144; static const uint32_t TX_DSP = 184; static const uint32_t LEDS = 195; -static const uint32_t FP_GPIO = 200; +static const uint32_t FP_GPIO = 201; static const uint32_t RX_FRONT = 208; static const uint32_t TX_FRONT = 216; static const uint32_t CODEC_IDLE = 250; diff --git a/host/lib/usrp/fe_connection.cpp b/host/lib/usrp/fe_connection.cpp new file mode 100644 index 000000000..071f5ecf2 --- /dev/null +++ b/host/lib/usrp/fe_connection.cpp @@ -0,0 +1,67 @@ +// +// Copyright 2016 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/usrp/fe_connection.hpp> +#include <uhd/exception.hpp> +#include <boost/regex.hpp> +#include <uhd/utils/math.hpp> + +using namespace uhd::usrp; + +fe_connection_t::fe_connection_t( + sampling_t sampling_mode, bool iq_swapped, + bool i_inverted, bool q_inverted, double if_freq +) : _sampling_mode(sampling_mode), _iq_swapped(iq_swapped), + _i_inverted(i_inverted), _q_inverted(q_inverted), _if_freq(if_freq) +{ +} + +fe_connection_t::fe_connection_t(const std::string& conn_str, double if_freq) { + static const boost::regex conn_regex("([IQ])(b?)(([IQ])(b?))?"); + boost::cmatch matches; + if (boost::regex_match(conn_str.c_str(), matches, conn_regex)) { + if (matches[3].length() == 0) { + //Connection in {I, Q, Ib, Qb} + _sampling_mode = REAL; + _iq_swapped = (matches[1].str() == "Q"); + _i_inverted = (matches[2].length() != 0); + _q_inverted = false; //IQ is swapped after inversion + } else { + //Connection in {I(b?)Q(b?), Q(b?)I(b?), I(b?)I(b?), Q(b?)Q(b?)} + _sampling_mode = (matches[1].str() == matches[4].str()) ? HETERODYNE : QUADRATURE; + _iq_swapped = (matches[1].str() == "Q"); + size_t i_idx = _iq_swapped ? 5 : 2, q_idx = _iq_swapped ? 2 : 5; + _i_inverted = (matches[i_idx].length() != 0); + _q_inverted = (matches[q_idx].length() != 0); + + if (_sampling_mode == HETERODYNE and _i_inverted != _q_inverted) { + throw uhd::value_error("Invalid connection string: " + conn_str); + } + } + _if_freq = if_freq; + } else { + throw uhd::value_error("Invalid connection string: " + conn_str); + } +} + +bool uhd::usrp::operator==(const fe_connection_t &lhs, const fe_connection_t &rhs){ + return ((lhs.get_sampling_mode() == rhs.get_sampling_mode()) and + (lhs.is_iq_swapped() == rhs.is_iq_swapped()) and + (lhs.is_i_inverted() == rhs.is_i_inverted()) and + (lhs.is_q_inverted() == rhs.is_q_inverted()) and + uhd::math::frequencies_are_equal(lhs.get_if_freq(), rhs.get_if_freq())); +} diff --git a/host/lib/usrp/multi_usrp.cpp b/host/lib/usrp/multi_usrp.cpp index 396237e24..dbc0ebed2 100644 --- a/host/lib/usrp/multi_usrp.cpp +++ b/host/lib/usrp/multi_usrp.cpp @@ -438,8 +438,10 @@ public: ******************************************************************/ void set_master_clock_rate(double rate, size_t mboard){ if (mboard != ALL_MBOARDS){ - if (_tree->exists(mb_root(mboard) / "auto_tick_rate")) { + if (_tree->exists(mb_root(mboard) / "auto_tick_rate") + and _tree->access<bool>(mb_root(mboard) / "auto_tick_rate").get()) { _tree->access<bool>(mb_root(mboard) / "auto_tick_rate").set(false); + UHD_MSG(status) << "Setting master clock rate selection to 'manual'." << std::endl; } _tree->access<double>(mb_root(mboard) / "tick_rate").set(rate); return; @@ -1346,10 +1348,10 @@ public: if (attr == "CTRL") iface->set_pin_ctrl(unit, boost::uint16_t(value), boost::uint16_t(mask)); if (attr == "DDR") iface->set_gpio_ddr(unit, boost::uint16_t(value), boost::uint16_t(mask)); if (attr == "OUT") iface->set_gpio_out(unit, boost::uint16_t(value), boost::uint16_t(mask)); - if (attr == "ATR_0X") iface->set_atr_reg(unit, dboard_iface::ATR_REG_IDLE, boost::uint16_t(value), boost::uint16_t(mask)); - if (attr == "ATR_RX") iface->set_atr_reg(unit, dboard_iface::ATR_REG_RX_ONLY, boost::uint16_t(value), boost::uint16_t(mask)); - if (attr == "ATR_TX") iface->set_atr_reg(unit, dboard_iface::ATR_REG_TX_ONLY, boost::uint16_t(value), boost::uint16_t(mask)); - if (attr == "ATR_XX") iface->set_atr_reg(unit, dboard_iface::ATR_REG_FULL_DUPLEX, boost::uint16_t(value), boost::uint16_t(mask)); + if (attr == "ATR_0X") iface->set_atr_reg(unit, gpio_atr::ATR_REG_IDLE, boost::uint16_t(value), boost::uint16_t(mask)); + if (attr == "ATR_RX") iface->set_atr_reg(unit, gpio_atr::ATR_REG_RX_ONLY, boost::uint16_t(value), boost::uint16_t(mask)); + if (attr == "ATR_TX") iface->set_atr_reg(unit, gpio_atr::ATR_REG_TX_ONLY, boost::uint16_t(value), boost::uint16_t(mask)); + if (attr == "ATR_XX") iface->set_atr_reg(unit, gpio_atr::ATR_REG_FULL_DUPLEX, boost::uint16_t(value), boost::uint16_t(mask)); } } @@ -1367,10 +1369,10 @@ public: if (attr == "CTRL") return iface->get_pin_ctrl(unit); if (attr == "DDR") return iface->get_gpio_ddr(unit); if (attr == "OUT") return iface->get_gpio_out(unit); - if (attr == "ATR_0X") return iface->get_atr_reg(unit, dboard_iface::ATR_REG_IDLE); - if (attr == "ATR_RX") return iface->get_atr_reg(unit, dboard_iface::ATR_REG_RX_ONLY); - if (attr == "ATR_TX") return iface->get_atr_reg(unit, dboard_iface::ATR_REG_TX_ONLY); - if (attr == "ATR_XX") return iface->get_atr_reg(unit, dboard_iface::ATR_REG_FULL_DUPLEX); + if (attr == "ATR_0X") return iface->get_atr_reg(unit, gpio_atr::ATR_REG_IDLE); + if (attr == "ATR_RX") return iface->get_atr_reg(unit, gpio_atr::ATR_REG_RX_ONLY); + if (attr == "ATR_TX") return iface->get_atr_reg(unit, gpio_atr::ATR_REG_TX_ONLY); + if (attr == "ATR_XX") return iface->get_atr_reg(unit, gpio_atr::ATR_REG_FULL_DUPLEX); if (attr == "READBACK") return iface->read_gpio(unit); } return 0; diff --git a/host/lib/usrp/n230/CMakeLists.txt b/host/lib/usrp/n230/CMakeLists.txt new file mode 100644 index 000000000..9eaccffba --- /dev/null +++ b/host/lib/usrp/n230/CMakeLists.txt @@ -0,0 +1,37 @@ +# +# Copyright 2013 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# This file included, use CMake directory variables +######################################################################## + +######################################################################## +# Conditionally configure the N230 support +######################################################################## +IF(ENABLE_N230) + LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/n230_cores.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/n230_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/n230_resource_manager.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/n230_eeprom_manager.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/n230_stream_manager.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/n230_clk_pps_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/n230_frontend_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/n230_uart.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/n230_image_loader.cpp + ) +ENDIF(ENABLE_N230) diff --git a/host/lib/usrp/n230/n230_clk_pps_ctrl.cpp b/host/lib/usrp/n230/n230_clk_pps_ctrl.cpp new file mode 100644 index 000000000..9d704b702 --- /dev/null +++ b/host/lib/usrp/n230/n230_clk_pps_ctrl.cpp @@ -0,0 +1,158 @@ +// +// Copyright 2013-2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "n230_clk_pps_ctrl.hpp" + +#include <uhd/utils/msg.hpp> +#include <uhd/utils/safe_call.hpp> +#include <boost/cstdint.hpp> +#include <boost/format.hpp> +#include <boost/foreach.hpp> +#include <stdexcept> +#include <cmath> +#include <cstdlib> + +namespace uhd { namespace usrp { namespace n230 { + +class n230_clk_pps_ctrl_impl : public n230_clk_pps_ctrl +{ +public: + n230_clk_pps_ctrl_impl( + ad9361_ctrl::sptr codec_ctrl, + n230_ref_pll_ctrl::sptr ref_pll_ctrl, + fpga::core_misc_reg_t& core_misc_reg, + fpga::core_pps_sel_reg_t& core_pps_sel, + fpga::core_status_reg_t& core_status_reg, + const std::vector<time_core_3000::sptr>& time_cores + ): _codec_ctrl(codec_ctrl), + _ref_pll_ctrl(ref_pll_ctrl), + _core_misc_reg(core_misc_reg), + _core_pps_sel_reg(core_pps_sel), + _core_status_reg(core_status_reg), + _time_cores(time_cores), + _tick_rate(0.0), + _clock_source("<undefined>"), + _time_source("<undefined>") + { + } + + virtual ~n230_clk_pps_ctrl_impl() + { + } + + double set_tick_rate(const double rate) + { + UHD_MSG(status) << "Configuring a tick rate of " << rate/1e6 << " MHz... "; + _tick_rate = _codec_ctrl->set_clock_rate(rate); + UHD_MSG(status) << "got " << _tick_rate/1e6 << " MHz\n"; + + BOOST_FOREACH(time_core_3000::sptr& time_core, _time_cores) { + time_core->set_tick_rate(_tick_rate); + time_core->self_test(); + } + + return _tick_rate; + } + + double get_tick_rate() + { + return _tick_rate; + } + + void set_clock_source(const std::string &source) + { + if (_clock_source == source) return; + + if (source == "internal") { + _ref_pll_ctrl->set_lock_to_ext_ref(false); + } else if (source == "external" || source == "gpsdo") { + _ref_pll_ctrl->set_lock_to_ext_ref(true); + } else { + throw uhd::key_error("set_clock_source: unknown source: " + source); + } + _core_misc_reg.write(fpga::core_misc_reg_t::REF_SEL, (source == "gpsdo") ? 1 : 0); + + _clock_source = source; + } + + const std::string& get_clock_source() + { + return _clock_source; + } + + uhd::sensor_value_t get_ref_locked() + { + bool locked = false; + if (_clock_source == "external" || _clock_source == "gpsdo") { + locked = (_core_status_reg.read(fpga::core_status_reg_t::REF_LOCKED) == 1); + } else { + //If the source is internal, the charge pump on the ADF4001 is tristated which + //means that the 40MHz VCTXXO is free running i.e. always "locked" + locked = true; + } + return sensor_value_t("Ref", locked, "locked", "unlocked"); + } + + void set_pps_source(const std::string &source) + { + if (_time_source == source) return; + + if (source == "none" or source == "gpsdo") { + _core_pps_sel_reg.write(fpga::core_pps_sel_reg_t::EXT_PPS_EN, 0); + } else if (source == "external") { + _core_pps_sel_reg.write(fpga::core_pps_sel_reg_t::EXT_PPS_EN, 1); + } else { + throw uhd::key_error("update_time_source: unknown source: " + source); + } + + _time_source = source; + } + + const std::string& get_pps_source() + { + return _time_source; + } + +private: + ad9361_ctrl::sptr _codec_ctrl; + n230_ref_pll_ctrl::sptr _ref_pll_ctrl; + fpga::core_misc_reg_t& _core_misc_reg; + fpga::core_pps_sel_reg_t& _core_pps_sel_reg; + fpga::core_status_reg_t& _core_status_reg; + std::vector<time_core_3000::sptr> _time_cores; + double _tick_rate; + std::string _clock_source; + std::string _time_source; +}; + +}}} //namespace + +using namespace uhd::usrp::n230; +using namespace uhd::usrp; + +n230_clk_pps_ctrl::sptr n230_clk_pps_ctrl::make( + ad9361_ctrl::sptr codec_ctrl, + n230_ref_pll_ctrl::sptr ref_pll_ctrl, + fpga::core_misc_reg_t& core_misc_reg, + fpga::core_pps_sel_reg_t& core_pps_sel_reg, + fpga::core_status_reg_t& core_status_reg, + const std::vector<time_core_3000::sptr>& time_cores) +{ + return sptr(new n230_clk_pps_ctrl_impl( + codec_ctrl, ref_pll_ctrl, core_misc_reg, core_pps_sel_reg, core_status_reg, time_cores)); +} + diff --git a/host/lib/usrp/n230/n230_clk_pps_ctrl.hpp b/host/lib/usrp/n230/n230_clk_pps_ctrl.hpp new file mode 100644 index 000000000..3e0a21e04 --- /dev/null +++ b/host/lib/usrp/n230/n230_clk_pps_ctrl.hpp @@ -0,0 +1,89 @@ +// +// Copyright 2013-2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_N230_CLK_PPS_CTRL_HPP +#define INCLUDED_N230_CLK_PPS_CTRL_HPP + +#include "time_core_3000.hpp" +#include "ad9361_ctrl.hpp" +#include <uhd/types/sensors.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include <vector> +#include "n230_cores.hpp" +#include "n230_fpga_defs.h" + +namespace uhd { namespace usrp { namespace n230 { + +class n230_clk_pps_ctrl : boost::noncopyable +{ +public: + typedef boost::shared_ptr<n230_clk_pps_ctrl> sptr; + + static sptr make( + ad9361_ctrl::sptr codec_ctrl, + n230_ref_pll_ctrl::sptr ref_pll_ctrl, + fpga::core_misc_reg_t& core_misc_reg, + fpga::core_pps_sel_reg_t& core_pps_sel_reg, + fpga::core_status_reg_t& core_status_reg, + const std::vector<time_core_3000::sptr>& time_cores); + + virtual ~n230_clk_pps_ctrl() {} + + /*********************************************************************** + * Tick Rate + **********************************************************************/ + /*! Set the master clock rate of the device. + * \return the clock frequency in Hz + */ + virtual double set_tick_rate(const double rate) = 0; + + /*! Get the master clock rate of the device. + * \return the clock frequency in Hz + */ + virtual double get_tick_rate() = 0; + + /*********************************************************************** + * Reference clock + **********************************************************************/ + /*! Set the reference clock source of the device. + */ + virtual void set_clock_source(const std::string &source) = 0; + + /*! Get the reference clock source of the device. + */ + virtual const std::string& get_clock_source() = 0; + + /*! Get the reference clock lock status. + */ + virtual uhd::sensor_value_t get_ref_locked() = 0; + + /*********************************************************************** + * Time source + **********************************************************************/ + /*! Set the time source of the device. + */ + virtual void set_pps_source(const std::string &source) = 0; + + /*! Get the reference clock source of the device. + */ + virtual const std::string& get_pps_source() = 0; +}; + +}}} //namespace + +#endif /* INCLUDED_N230_CLK_PPS_CTRL_HPP */ diff --git a/host/lib/usrp/n230/n230_cores.cpp b/host/lib/usrp/n230/n230_cores.cpp new file mode 100644 index 000000000..58c702ec1 --- /dev/null +++ b/host/lib/usrp/n230/n230_cores.cpp @@ -0,0 +1,91 @@ +// +// Copyright 2013-2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "n230_cores.hpp" +#include "n230_fpga_defs.h" +#include "n230_fw_defs.h" + +namespace uhd { namespace usrp { namespace n230 { + +n230_core_spi_core::n230_core_spi_core( + uhd::wb_iface::sptr iface, + perif_t default_perif) : + _spi_core(spi_core_3000::make(iface, + fpga::sr_addr(fpga::SR_CORE_SPI), + fpga::rb_addr(fpga::RB_CORE_SPI))), + _current_perif(default_perif), + _last_perif(default_perif) +{ + change_perif(default_perif); +} + +boost::uint32_t n230_core_spi_core::transact_spi( + int which_slave, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits, + bool readback) +{ + boost::mutex::scoped_lock lock(_mutex); + return _spi_core->transact_spi(which_slave, config, data, num_bits, readback); +} + +void n230_core_spi_core::change_perif(perif_t perif) +{ + boost::mutex::scoped_lock lock(_mutex); + _last_perif = _current_perif; + _current_perif = perif; + + switch (_current_perif) { + case CODEC: + _spi_core->set_divider(fw::CPU_CLOCK_FREQ/fw::CODEC_SPI_CLOCK_FREQ); + break; + case PLL: + _spi_core->set_divider(fw::CPU_CLOCK_FREQ/fw::ADF4001_SPI_CLOCK_FREQ); + break; + } +} + +void n230_core_spi_core::restore_perif() +{ + change_perif(_last_perif); +} + +n230_ref_pll_ctrl::n230_ref_pll_ctrl(n230_core_spi_core::sptr spi) : + adf4001_ctrl(spi, fpga::ADF4001_SPI_SLAVE_NUM), + _spi(spi) +{ +} + +void n230_ref_pll_ctrl::set_lock_to_ext_ref(bool external) +{ + _spi->change_perif(n230_core_spi_core::PLL); + adf4001_ctrl::set_lock_to_ext_ref(external); + _spi->restore_perif(); +} + +}}} //namespace + +using namespace uhd::usrp::n230; +using namespace uhd::usrp; + +n230_core_spi_core::sptr n230_core_spi_core::make( + uhd::wb_iface::sptr iface, n230_core_spi_core::perif_t default_perif) +{ + return sptr(new n230_core_spi_core(iface, default_perif)); +} + diff --git a/host/lib/usrp/n230/n230_cores.hpp b/host/lib/usrp/n230/n230_cores.hpp new file mode 100644 index 000000000..3f56c1889 --- /dev/null +++ b/host/lib/usrp/n230/n230_cores.hpp @@ -0,0 +1,71 @@ +// +// Copyright 2013-2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_N230_CORES_HPP +#define INCLUDED_N230_CORES_HPP + +#include "spi_core_3000.hpp" +#include "adf4001_ctrl.hpp" +#include <boost/thread/mutex.hpp> + +namespace uhd { namespace usrp { namespace n230 { + +class n230_core_spi_core : boost::noncopyable, public uhd::spi_iface { + +public: + typedef boost::shared_ptr<n230_core_spi_core> sptr; + + enum perif_t { + CODEC, PLL + }; + + n230_core_spi_core(uhd::wb_iface::sptr iface, perif_t default_perif); + + virtual boost::uint32_t transact_spi( + int which_slave, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits, + bool readback); + + void change_perif(perif_t perif); + void restore_perif(); + + static sptr make(uhd::wb_iface::sptr iface, perif_t default_perif = CODEC); + +private: + spi_core_3000::sptr _spi_core; + perif_t _current_perif; + perif_t _last_perif; + boost::mutex _mutex; +}; + +class n230_ref_pll_ctrl : public adf4001_ctrl { +public: + typedef boost::shared_ptr<n230_ref_pll_ctrl> sptr; + + n230_ref_pll_ctrl(n230_core_spi_core::sptr spi); + void set_lock_to_ext_ref(bool external); + +private: + n230_core_spi_core::sptr _spi; +}; + + +}}} //namespace + +#endif /* INCLUDED_N230_CORES_HPP */ diff --git a/host/lib/usrp/n230/n230_defaults.h b/host/lib/usrp/n230/n230_defaults.h new file mode 100644 index 000000000..a25978585 --- /dev/null +++ b/host/lib/usrp/n230/n230_defaults.h @@ -0,0 +1,65 @@ +// +// Copyright 2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_N230_DEFAULTS_H +#define INCLUDED_N230_DEFAULTS_H + +#include <stdint.h> +#ifndef __cplusplus +#include <stdbool.h> +#endif +#include <uhd/transport/udp_constants.hpp> + +namespace uhd { +namespace usrp { +namespace n230 { + +static const double DEFAULT_TICK_RATE = 46.08e6; +static const double MAX_TICK_RATE = 50e6; +static const double MIN_TICK_RATE = 1e6; + +static const double DEFAULT_TX_SAMP_RATE = 1.0e6; +static const double DEFAULT_RX_SAMP_RATE = 1.0e6; +static const double DEFAULT_DDC_FREQ = 0.0; +static const double DEFAULT_DUC_FREQ = 0.0; + +static const double DEFAULT_FE_GAIN = 0.0; +static const double DEFAULT_FE_FREQ = 1.0e9; +static const double DEFAULT_FE_BW = 56e6; + +static const std::string DEFAULT_TIME_SRC = "none"; +static const std::string DEFAULT_CLOCK_SRC = "internal"; + +static const size_t DEFAULT_FRAME_SIZE = 1500 - 20 - 8; //default ipv4 mtu - ipv4 header - udp header +static const size_t MAX_FRAME_SIZE = 8000; +static const size_t MIN_FRAME_SIZE = IP_PROTOCOL_MIN_MTU_SIZE; + +static const size_t DEFAULT_NUM_FRAMES = 32; + +//A 1MiB SRAM is shared between two radios so we allocate each +//radio 0.5MiB minus 8 packets worth of buffering to ensure +//that the FIFO does not overflow +static const size_t DEFAULT_SEND_BUFF_SIZE = 500*1024; +#if defined(UHD_PLATFORM_MACOS) || defined(UHD_PLATFORM_BSD) +static const size_t DEFAULT_RECV_BUFF_SIZE = 0x100000; //1Mib +#elif defined(UHD_PLATFORM_LINUX) || defined(UHD_PLATFORM_WIN32) +static const size_t DEFAULT_RECV_BUFF_SIZE = 0x2000000;//32MiB +#endif + +}}} //namespace + +#endif /* INCLUDED_N230_DEFAULTS_H */ diff --git a/host/lib/usrp/n230/n230_device_args.hpp b/host/lib/usrp/n230/n230_device_args.hpp new file mode 100644 index 000000000..014a6cd14 --- /dev/null +++ b/host/lib/usrp/n230/n230_device_args.hpp @@ -0,0 +1,128 @@ +// +// Copyright 2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_N230_DEV_ARGS_HPP +#define INCLUDED_N230_DEV_ARGS_HPP + +#include <uhd/types/wb_iface.hpp> +#include <uhd/transport/udp_simple.hpp> +#include <boost/thread/mutex.hpp> +#include "../common/constrained_device_args.hpp" +#include "n230_defaults.h" + +namespace uhd { namespace usrp { namespace n230 { + +class n230_device_args_t : public constrained_device_args_t +{ +public: + enum loopback_mode_t { LOOPBACK_OFF=0, LOOPBACK_RADIO=1, LOOPBACK_CODEC=2 }; + + n230_device_args_t(): + _master_clock_rate("master_clock_rate", n230::DEFAULT_TICK_RATE), + _send_frame_size("send_frame_size", n230::DEFAULT_FRAME_SIZE), + _recv_frame_size("recv_frame_size", n230::DEFAULT_FRAME_SIZE), + _num_send_frames("num_send_frames", n230::DEFAULT_NUM_FRAMES), + _num_recv_frames("num_recv_frames", n230::DEFAULT_NUM_FRAMES), + _send_buff_size("send_buff_size", n230::DEFAULT_SEND_BUFF_SIZE), + _recv_buff_size("recv_buff_size", n230::DEFAULT_RECV_BUFF_SIZE), + _safe_mode("safe_mode", false), + _loopback_mode("loopback_mode", LOOPBACK_OFF, boost::assign::list_of("off")("radio")("codec")) + {} + + double get_master_clock_rate() const { + return _master_clock_rate.get(); + } + size_t get_send_frame_size() const { + return _send_frame_size.get(); + } + size_t get_recv_frame_size() const { + return _recv_frame_size.get(); + } + size_t get_num_send_frames() const { + return _num_send_frames.get(); + } + size_t get_num_recv_frames() const { + return _num_recv_frames.get(); + } + size_t get_send_buff_size() const { + return _send_buff_size.get(); + } + size_t get_recv_buff_size() const { + return _recv_buff_size.get(); + } + bool get_safe_mode() const { + return _safe_mode.get(); + } + loopback_mode_t get_loopback_mode() const { + return _loopback_mode.get(); + } + + inline virtual std::string to_string() const { + return _master_clock_rate.to_string() + ", " + + _send_frame_size.to_string() + ", " + + _recv_frame_size.to_string() + ", " + + _num_send_frames.to_string() + ", " + + _num_recv_frames.to_string() + ", " + + _send_buff_size.to_string() + ", " + + _recv_buff_size.to_string() + ", " + + _safe_mode.to_string() + ", " + + _loopback_mode.to_string(); + } +private: + virtual void _parse(const device_addr_t& dev_args) { + //Extract parameters from dev_args + if (dev_args.has_key(_master_clock_rate.key())) + _master_clock_rate.parse(dev_args[_master_clock_rate.key()]); + if (dev_args.has_key(_send_frame_size.key())) + _send_frame_size.parse(dev_args[_send_frame_size.key()]); + if (dev_args.has_key(_recv_frame_size.key())) + _recv_frame_size.parse(dev_args[_recv_frame_size.key()]); + if (dev_args.has_key(_num_send_frames.key())) + _num_send_frames.parse(dev_args[_num_send_frames.key()]); + if (dev_args.has_key(_num_recv_frames.key())) + _num_recv_frames.parse(dev_args[_num_recv_frames.key()]); + if (dev_args.has_key(_send_buff_size.key())) + _send_buff_size.parse(dev_args[_send_buff_size.key()]); + if (dev_args.has_key(_recv_buff_size.key())) + _recv_buff_size.parse(dev_args[_recv_buff_size.key()]); + if (dev_args.has_key(_safe_mode.key())) + _safe_mode.parse(dev_args[_safe_mode.key()]); + if (dev_args.has_key(_loopback_mode.key())) + _loopback_mode.parse(dev_args[_loopback_mode.key()], false /* assert invalid */); + + //Sanity check params + _enforce_range(_master_clock_rate, MIN_TICK_RATE, MAX_TICK_RATE); + _enforce_range(_send_frame_size, MIN_FRAME_SIZE, MAX_FRAME_SIZE); + _enforce_range(_recv_frame_size, MIN_FRAME_SIZE, MAX_FRAME_SIZE); + _enforce_range(_num_send_frames, (size_t)2, (size_t)UINT_MAX); + _enforce_range(_num_recv_frames, (size_t)2, (size_t)UINT_MAX); + } + + constrained_device_args_t::num_arg<double> _master_clock_rate; + constrained_device_args_t::num_arg<size_t> _send_frame_size; + constrained_device_args_t::num_arg<size_t> _recv_frame_size; + constrained_device_args_t::num_arg<size_t> _num_send_frames; + constrained_device_args_t::num_arg<size_t> _num_recv_frames; + constrained_device_args_t::num_arg<size_t> _send_buff_size; + constrained_device_args_t::num_arg<size_t> _recv_buff_size; + constrained_device_args_t::bool_arg _safe_mode; + constrained_device_args_t::enum_arg<loopback_mode_t> _loopback_mode; +}; + +}}} //namespace + +#endif //INCLUDED_N230_DEV_ARGS_HPP diff --git a/host/lib/usrp/n230/n230_eeprom.h b/host/lib/usrp/n230/n230_eeprom.h new file mode 100644 index 000000000..b6c2a0c76 --- /dev/null +++ b/host/lib/usrp/n230/n230_eeprom.h @@ -0,0 +1,124 @@ +// +// Copyright 2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_N230_EEPROM_H +#define INCLUDED_N230_EEPROM_H + +#include <stdint.h> +#ifndef __cplusplus +#include <stdbool.h> +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +#define N230_NUM_ETH_PORTS 2 +#define N230_MAX_NUM_ETH_PORTS 2 + +#if (N230_NUM_ETH_PORTS > N230_MAX_NUM_ETH_PORTS) +#error +#endif + +#define N230_EEPROM_VER_MAJOR 1 +#define N230_EEPROM_VER_MINOR 1 +#define N230_EEPROM_SERIAL_LEN 9 +#define N230_EEPROM_NAME_LEN 32 + +typedef struct +{ + uint8_t mac_addr[6]; + uint8_t _pad[2]; + uint32_t subnet; + uint32_t ip_addr; +} n230_eth_eeprom_map_t; + +typedef struct +{ + //Data format version + uint16_t data_version_major; + uint16_t data_version_minor; + + //HW identification info + uint16_t hw_revision; + uint16_t hw_product; + uint8_t serial[N230_EEPROM_SERIAL_LEN]; + uint8_t _pad_serial; + uint16_t hw_revision_compat; + uint8_t _pad0[18 - (N230_EEPROM_SERIAL_LEN + 1)]; + + //Ethernet specific + uint32_t gateway; + n230_eth_eeprom_map_t eth_info[N230_MAX_NUM_ETH_PORTS]; + + //User specific + uint8_t user_name[N230_EEPROM_NAME_LEN]; +} n230_eeprom_map_t; + +#ifdef __cplusplus +} //extern "C" +#endif + +// The following definitions are only useful in firmware. Exclude in host code. +#ifndef __cplusplus + +/*! + * Read the eeprom and update caches. + * Returns true if read was successful. + * If the read was not successful then the cache is initialized with + * default values and marked as dirty. + */ +bool read_n230_eeprom(); + +/*! + * Write the contents of the cache to the eeprom. + * Returns true if write was successful. + */ +bool write_n230_eeprom(); + +/*! + * Returns the dirty state of the cache. + */ +bool is_n230_eeprom_cache_dirty(); + +/*! + * Returns a const pointer to the EEPROM map. + */ +const n230_eeprom_map_t* get_n230_const_eeprom_map(); + +/*! + * Returns the settings for the the 'iface'th ethernet interface + */ +const n230_eth_eeprom_map_t* get_n230_ethernet_info(uint32_t iface); + +/*! + * Returns a non-const pointer to the EEPROM map. Will mark the cache as dirty. + */ +n230_eeprom_map_t* get_n230_eeprom_map(); + +/*! + * FPGA Image operations + */ +inline void read_n230_fpga_image_page(uint32_t offset, void *buf, uint32_t num_bytes); + +inline bool write_n230_fpga_image_page(uint32_t offset, const void *buf, uint32_t num_bytes); + +inline bool erase_n230_fpga_image_sector(uint32_t offset); + +#endif //ifdef __cplusplus + +#endif /* INCLUDED_N230_EEPROM_H */ diff --git a/host/lib/usrp/n230/n230_eeprom_manager.cpp b/host/lib/usrp/n230/n230_eeprom_manager.cpp new file mode 100644 index 000000000..b19deb23a --- /dev/null +++ b/host/lib/usrp/n230/n230_eeprom_manager.cpp @@ -0,0 +1,207 @@ +// +// Copyright 2013-2014,2016 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "n230_eeprom.h" +#include <uhd/utils/byteswap.hpp> +#include <uhd/utils/msg.hpp> +#include <uhd/exception.hpp> +#include <uhd/types/mac_addr.hpp> +#include <boost/format.hpp> +#include <boost/asio.hpp> //used for htonl and ntohl +#include "n230_eeprom_manager.hpp" + +namespace uhd { namespace usrp { namespace n230 { + +const double n230_eeprom_manager::UDP_TIMEOUT_IN_SEC = 2.0; + +n230_eeprom_manager::n230_eeprom_manager(const std::string& addr): + _seq_num(0) +{ + _udp_xport = transport::udp_simple::make_connected( + addr, BOOST_STRINGIZE(N230_FW_COMMS_FLASH_PROG_PORT)); + read_mb_eeprom(); +} + +static const std::string _bytes_to_string(const uint8_t* bytes, size_t max_len) +{ + std::string out; + for (size_t i = 0; i < max_len; i++) { + if (bytes[i] < 32 or bytes[i] > 127) return out; + out += bytes[i]; + } + return out; +} + +static void _string_to_bytes(const std::string &string, size_t max_len, uint8_t* buffer) +{ + byte_vector_t bytes; + const size_t len = std::min(string.size(), max_len); + for (size_t i = 0; i < len; i++){ + buffer[i] = string[i]; + } + if (len < max_len - 1) buffer[len] = '\0'; +} + +const mboard_eeprom_t& n230_eeprom_manager::read_mb_eeprom() +{ + boost::mutex::scoped_lock lock(_mutex); + + //Read EEPROM from device + _transact(N230_FLASH_COMM_CMD_READ_NV_DATA); + const n230_eeprom_map_t* map_ptr = reinterpret_cast<const n230_eeprom_map_t*>(_response.data); + const n230_eeprom_map_t& map = *map_ptr; + + uint16_t ver_major = uhd::htonx<boost::uint16_t>(map.data_version_major); + uint16_t ver_minor = uhd::htonx<boost::uint16_t>(map.data_version_minor); + + _mb_eeprom["product"] = boost::lexical_cast<std::string>( + uhd::htonx<boost::uint16_t>(map.hw_product)); + _mb_eeprom["revision"] = boost::lexical_cast<std::string>( + uhd::htonx<boost::uint16_t>(map.hw_revision)); + //The revision_compat field does not exist in version 1.0 + //EEPROM version 1.0 will only exist on HW revision 1 so it is safe to set + //revision_compat = revision + if (ver_major == 1 and ver_minor == 0) { + _mb_eeprom["revision_compat"] = _mb_eeprom["revision"]; + } else { + _mb_eeprom["revision_compat"] = boost::lexical_cast<std::string>( + uhd::htonx<boost::uint16_t>(map.hw_revision_compat)); + } + _mb_eeprom["serial"] = _bytes_to_string( + map.serial, N230_EEPROM_SERIAL_LEN); + + //Extract ethernet info + _mb_eeprom["gateway"] = boost::asio::ip::address_v4( + uhd::htonx<boost::uint32_t>(map.gateway)).to_string(); + for (size_t i = 0; i < N230_MAX_NUM_ETH_PORTS; i++) { + const std::string n(1, i+'0'); + _mb_eeprom["ip-addr"+n] = boost::asio::ip::address_v4( + uhd::htonx<boost::uint32_t>(map.eth_info[i].ip_addr)).to_string(); + _mb_eeprom["subnet"+n] = boost::asio::ip::address_v4( + uhd::htonx<boost::uint32_t>(map.eth_info[i].subnet)).to_string(); + byte_vector_t mac_addr(map.eth_info[i].mac_addr, map.eth_info[i].mac_addr + 6); + _mb_eeprom["mac-addr"+n] = mac_addr_t::from_bytes(mac_addr).to_string(); + } + + _mb_eeprom["name"] = _bytes_to_string( + map.user_name, N230_EEPROM_NAME_LEN); + + return _mb_eeprom; +} + +void n230_eeprom_manager::write_mb_eeprom(const mboard_eeprom_t& eeprom) +{ + boost::mutex::scoped_lock lock(_mutex); + + _mb_eeprom = eeprom; + + n230_eeprom_map_t* map_ptr = reinterpret_cast<n230_eeprom_map_t*>(_request.data); + memset(map_ptr, 0xff, sizeof(n230_eeprom_map_t)); //Initialize to erased state + //Read EEPROM from device + _transact(N230_FLASH_COMM_CMD_READ_NV_DATA); + memcpy(map_ptr, _response.data, sizeof(n230_eeprom_map_t)); + n230_eeprom_map_t& map = *map_ptr; + + // Automatic version upgrade handling + uint16_t old_ver_major = uhd::htonx<boost::uint16_t>(map.data_version_major); + uint16_t old_ver_minor = uhd::htonx<boost::uint16_t>(map.data_version_minor); + + //The revision_compat field does not exist for version 1.0 so force write it + //EEPROM version 1.0 will only exist on HW revision 1 so it is safe to set + //revision_compat = revision for the upgrade + bool force_write_version_compat = (old_ver_major == 1 and old_ver_minor == 0); + + map.data_version_major = uhd::htonx<boost::uint16_t>(N230_EEPROM_VER_MAJOR); + map.data_version_minor = uhd::htonx<boost::uint16_t>(N230_EEPROM_VER_MINOR); + + if (_mb_eeprom.has_key("product")) { + map.hw_product = uhd::htonx<boost::uint16_t>( + boost::lexical_cast<boost::uint16_t>(_mb_eeprom["product"])); + } + if (_mb_eeprom.has_key("revision")) { + map.hw_revision = uhd::htonx<boost::uint16_t>( + boost::lexical_cast<boost::uint16_t>(_mb_eeprom["revision"])); + } + if (_mb_eeprom.has_key("revision_compat")) { + map.hw_revision_compat = uhd::htonx<boost::uint16_t>( + boost::lexical_cast<boost::uint16_t>(_mb_eeprom["revision_compat"])); + } else if (force_write_version_compat) { + map.hw_revision_compat = map.hw_revision; + } + if (_mb_eeprom.has_key("serial")) { + _string_to_bytes(_mb_eeprom["serial"], N230_EEPROM_SERIAL_LEN, map.serial); + } + + //Push ethernet info + if (_mb_eeprom.has_key("gateway")){ + map.gateway = uhd::htonx<boost::uint32_t>( + boost::asio::ip::address_v4::from_string(_mb_eeprom["gateway"]).to_ulong()); + } + for (size_t i = 0; i < N230_MAX_NUM_ETH_PORTS; i++) { + const std::string n(1, i+'0'); + if (_mb_eeprom.has_key("ip-addr"+n)){ + map.eth_info[i].ip_addr = uhd::htonx<boost::uint32_t>( + boost::asio::ip::address_v4::from_string(_mb_eeprom["ip-addr"+n]).to_ulong()); + } + if (_mb_eeprom.has_key("subnet"+n)){ + map.eth_info[i].subnet = uhd::htonx<boost::uint32_t>( + boost::asio::ip::address_v4::from_string(_mb_eeprom["subnet"+n]).to_ulong()); + } + if (_mb_eeprom.has_key("mac-addr"+n)) { + byte_vector_t mac_addr = mac_addr_t::from_string(_mb_eeprom["mac-addr"+n]).to_bytes(); + std::copy(mac_addr.begin(), mac_addr.end(), map.eth_info[i].mac_addr); + } + } + //store the name + if (_mb_eeprom.has_key("name")) { + _string_to_bytes(_mb_eeprom["name"], N230_EEPROM_NAME_LEN, map.user_name); + } + + //Write EEPROM to device + _transact(N230_FLASH_COMM_CMD_WRITE_NV_DATA); +} + +void n230_eeprom_manager::_transact(const boost::uint32_t command) +{ + //Load request struct + _request.flags = uhd::htonx<boost::uint32_t>(N230_FLASH_COMM_FLAGS_ACK | command); + _request.seq = uhd::htonx<boost::uint32_t>(_seq_num++); + + //Send request + _flush_xport(); + _udp_xport->send(boost::asio::buffer(&_request, sizeof(_request))); + + //Recv reply + const size_t nbytes = _udp_xport->recv(boost::asio::buffer(&_response, sizeof(_response)), UDP_TIMEOUT_IN_SEC); + if (nbytes == 0) throw uhd::io_error("n230_eeprom_manager::_transact failure"); + + //Sanity checks + const size_t flags = uhd::ntohx<boost::uint32_t>(_response.flags); + UHD_ASSERT_THROW(nbytes == sizeof(_response)); + UHD_ASSERT_THROW(_response.seq == _request.seq); + UHD_ASSERT_THROW(flags & command); +} + +void n230_eeprom_manager::_flush_xport() +{ + char buff[sizeof(n230_flash_prog_t)] = {}; + while (_udp_xport->recv(boost::asio::buffer(buff), 0.0)) { + /*NOP*/ + } +} + +}}}; //namespace diff --git a/host/lib/usrp/n230/n230_eeprom_manager.hpp b/host/lib/usrp/n230/n230_eeprom_manager.hpp new file mode 100644 index 000000000..cc5aee9f3 --- /dev/null +++ b/host/lib/usrp/n230/n230_eeprom_manager.hpp @@ -0,0 +1,58 @@ +// +// Copyright 2013-2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_N230_EEPROM_MANAGER_HPP +#define INCLUDED_N230_EEPROM_MANAGER_HPP + +#include <boost/thread/mutex.hpp> +#include <uhd/transport/udp_simple.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/usrp/mboard_eeprom.hpp> +#include "n230_fw_host_iface.h" + +namespace uhd { namespace usrp { namespace n230 { + +class n230_eeprom_manager : boost::noncopyable +{ +public: + n230_eeprom_manager(const std::string& addr); + + const mboard_eeprom_t& read_mb_eeprom(); + void write_mb_eeprom(const mboard_eeprom_t& eeprom); + + inline const mboard_eeprom_t& get_mb_eeprom() { + return _mb_eeprom; + } + +private: //Functions + void _transact(const boost::uint32_t command); + void _flush_xport(); + +private: //Members + mboard_eeprom_t _mb_eeprom; + transport::udp_simple::sptr _udp_xport; + n230_flash_prog_t _request; + n230_flash_prog_t _response; + boost::uint32_t _seq_num; + boost::mutex _mutex; + + static const double UDP_TIMEOUT_IN_SEC; +}; + +}}} //namespace + +#endif /* INCLUDED_N230_EEPROM_MANAGER_HPP */ diff --git a/host/lib/usrp/n230/n230_fpga_defs.h b/host/lib/usrp/n230/n230_fpga_defs.h new file mode 100644 index 000000000..3aa96643f --- /dev/null +++ b/host/lib/usrp/n230/n230_fpga_defs.h @@ -0,0 +1,207 @@ +// +// Copyright 2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_N230_FPGA_DEFS_H +#define INCLUDED_N230_FPGA_DEFS_H + +#include <stdint.h> +#ifndef __cplusplus +#include <stdbool.h> +#endif +#include <uhd/utils/soft_register.hpp> + +namespace uhd { +namespace usrp { +namespace n230 { +namespace fpga { + +static inline uint32_t sr_addr(uint32_t offset) { + return (offset*4); +} + +static inline uint32_t rb_addr(uint32_t offset) { + return (offset*8); +} + +static const size_t NUM_RADIOS = 2; +static const double BUS_CLK_RATE = 80e6; + +/******************************************************************* + * CVITA Routing + *******************************************************************/ +static const uint32_t CVITA_UDP_PORT = 49153; +static const bool CVITA_BIG_ENDIAN = true; + +enum xb_endpoint_t { + N230_XB_DST_E0 = 0, + N230_XB_DST_E1 = 1, + N230_XB_DST_R0 = 2, + N230_XB_DST_R1 = 3, + N230_XB_DST_GCTRL = 4, + N230_XB_DST_UART = 5 +}; + +static const boost::uint8_t RADIO_CTRL_SUFFIX = 0x00; +static const boost::uint8_t RADIO_FC_SUFFIX = 0x01; +static const boost::uint8_t RADIO_DATA_SUFFIX = 0x02; + +/******************************************************************* + * Seting Register Base addresses + *******************************************************************/ +static const uint32_t SR_CORE_RADIO_CONTROL = 3; +static const uint32_t SR_CORE_LOOPBACK = 4; +static const uint32_t SR_CORE_BIST1 = 5; +static const uint32_t SR_CORE_BIST2 = 6; +static const uint32_t SR_CORE_SPI = 8; +static const uint32_t SR_CORE_MISC = 16; +static const uint32_t SR_CORE_DATA_DELAY = 17; +static const uint32_t SR_CORE_CLK_DELAY = 18; +static const uint32_t SR_CORE_COMPAT = 24; +static const uint32_t SR_CORE_READBACK = 32; +static const uint32_t SR_CORE_GPSDO_ST = 40; +static const uint32_t SR_CORE_PPS_SEL = 48; +static const uint32_t SR_CORE_MS0_GPIO = 50; +static const uint32_t SR_CORE_MS1_GPIO = 58; + +static const uint32_t RB_CORE_SIGNATUE = 0; +static const uint32_t RB_CORE_SPI = 1; +static const uint32_t RB_CORE_STATUS = 2; +static const uint32_t RB_CORE_BIST = 3; +static const uint32_t RB_CORE_VERSION_HASH = 4; +static const uint32_t RB_CORE_MS0_GPIO = 5; +static const uint32_t RB_CORE_MS1_GPIO = 6; + +/******************************************************************* + * Seting Register Base addresses + *******************************************************************/ +static const uint32_t SR_RADIO_SPI = 8; +static const uint32_t SR_RADIO_ATR = 12; +static const uint32_t SR_RADIO_SW_RST = 20; +static const uint32_t SR_RADIO_TEST = 21; +static const uint32_t SR_RADIO_CODEC_IDLE = 22; +static const uint32_t SR_RADIO_READBACK = 32; +static const uint32_t SR_RADIO_TX_CTRL = 64; +static const uint32_t SR_RADIO_RX_CTRL = 96; +static const uint32_t SR_RADIO_RX_DSP = 144; +static const uint32_t SR_RADIO_TX_DSP = 184; +static const uint32_t SR_RADIO_TIME = 128; +static const uint32_t SR_RADIO_RX_FMT = 136; +static const uint32_t SR_RADIO_TX_FMT = 138; +static const uint32_t SR_RADIO_USER_SR = 253; + +static const uint32_t RB_RADIO_TEST = 0; +static const uint32_t RB_RADIO_TIME_NOW = 1; +static const uint32_t RB_RADIO_TIME_PPS = 2; +static const uint32_t RB_RADIO_CODEC_DATA = 3; +static const uint32_t RB_RADIO_DEBUG = 4; +static const uint32_t RB_RADIO_FRAMER = 5; +static const uint32_t SR_RADIO_USER_RB = 7; + +static const uint32_t AD9361_SPI_SLAVE_NUM = 0x1; +static const uint32_t ADF4001_SPI_SLAVE_NUM = 0x2; + +static const uint32_t RB_N230_PRODUCT_ID = 1; +static const uint32_t RB_N230_COMPAT_MAJOR = 0x20; +static const uint32_t RB_N230_COMPAT_SAFE = 0xC0; + +/******************************************************************* + * Codec Interface Specific + *******************************************************************/ + +// Matches delay setting of 0x00 in AD9361 register 0x006 +static const uint32_t CODEC_DATA_DELAY = 0; +static const uint32_t CODEC_CLK_DELAY = 16; + +//This number must be < 46.08MHz to make sure we don't +//violate timing for radio_clk. It is only used during +//initialization so the exact value does not matter. +static const double CODEC_DEFAULT_CLK_RATE = 40e6; + +/******************************************************************* + * Link Specific + *******************************************************************/ +static const double N230_LINK_RATE_BPS = 1e9/8; + +/******************************************************************* + * GPSDO + *******************************************************************/ +static const uint32_t GPSDO_UART_BAUDRATE = 115200; +static const uint32_t GPSDO_ST_ABSENT = 0x83; +/******************************************************************* + * Register Objects + *******************************************************************/ +class core_radio_ctrl_reg_t : public soft_reg32_wo_t { +public: + UHD_DEFINE_SOFT_REG_FIELD(MIMO, /*width*/ 1, /*shift*/ 0); //[0] + UHD_DEFINE_SOFT_REG_FIELD(CODEC_ARST, /*width*/ 1, /*shift*/ 1); //[1] + + core_radio_ctrl_reg_t(): + soft_reg32_wo_t(fpga::sr_addr(fpga::SR_CORE_RADIO_CONTROL)) + { + //Initial values + set(CODEC_ARST, 0); + set(MIMO, 1); //MIMO always ON for now + } +}; + +class core_misc_reg_t : public soft_reg32_wo_t { +public: + UHD_DEFINE_SOFT_REG_FIELD(REF_SEL, /*width*/ 1, /*shift*/ 0); //[0] + UHD_DEFINE_SOFT_REG_FIELD(RX_BANDSEL_C, /*width*/ 1, /*shift*/ 1); //[1] + UHD_DEFINE_SOFT_REG_FIELD(RX_BANDSEL_B, /*width*/ 1, /*shift*/ 2); //[2] + UHD_DEFINE_SOFT_REG_FIELD(RX_BANDSEL_A, /*width*/ 1, /*shift*/ 3); //[3] + UHD_DEFINE_SOFT_REG_FIELD(TX_BANDSEL_B, /*width*/ 1, /*shift*/ 4); //[4] + UHD_DEFINE_SOFT_REG_FIELD(TX_BANDSEL_A, /*width*/ 1, /*shift*/ 5); //[5] + + core_misc_reg_t(): + soft_reg32_wo_t(fpga::sr_addr(fpga::SR_CORE_MISC)) + { + //Initial values + set(REF_SEL, 0); + set(RX_BANDSEL_C, 0); + set(RX_BANDSEL_B, 0); + set(RX_BANDSEL_A, 0); + set(TX_BANDSEL_B, 0); + set(TX_BANDSEL_A, 0); + } +}; + +class core_pps_sel_reg_t : public soft_reg32_wo_t { +public: + UHD_DEFINE_SOFT_REG_FIELD(EXT_PPS_EN, /*width*/ 1, /*shift*/ 0); //[0] + + core_pps_sel_reg_t(): + soft_reg32_wo_t(fpga::sr_addr(fpga::SR_CORE_PPS_SEL)) + { + //Initial values + set(EXT_PPS_EN, 0); + } +}; + +class core_status_reg_t : public soft_reg64_ro_t { +public: + UHD_DEFINE_SOFT_REG_FIELD(REF_LOCKED, /*width*/ 1, /*shift*/ 0); //[0] + UHD_DEFINE_SOFT_REG_FIELD(GPSDO_STATUS, /*width*/ 8, /*shift*/ 32); //[32:39] + + core_status_reg_t(): + soft_reg64_ro_t(fpga::rb_addr(fpga::RB_CORE_STATUS)) + { } +}; + +}}}} //namespace + +#endif /* INCLUDED_N230_FPGA_DEFS_H */ diff --git a/host/lib/usrp/n230/n230_frontend_ctrl.cpp b/host/lib/usrp/n230/n230_frontend_ctrl.cpp new file mode 100644 index 000000000..e0820d9b2 --- /dev/null +++ b/host/lib/usrp/n230/n230_frontend_ctrl.cpp @@ -0,0 +1,243 @@ +// +// Copyright 2013-2014,2016 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "n230_frontend_ctrl.hpp" + +#include <uhd/utils/msg.hpp> +#include <uhd/exception.hpp> +#include <uhd/types/dict.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include "n230_fpga_defs.h" + +namespace uhd { namespace usrp { namespace n230 { + +/* ATR Control Bits */ +static const boost::uint32_t TX_ENABLE = (1 << 7); +static const boost::uint32_t SFDX_RX = (1 << 6); +static const boost::uint32_t SFDX_TX = (1 << 5); +static const boost::uint32_t SRX_RX = (1 << 4); +static const boost::uint32_t SRX_TX = (1 << 3); +static const boost::uint32_t LED_RX = (1 << 2); +static const boost::uint32_t LED_TXRX_RX = (1 << 1); +static const boost::uint32_t LED_TXRX_TX = (1 << 0); + +/* ATR State Definitions. */ +static const boost::uint32_t STATE_OFF = 0x00; +static const boost::uint32_t STATE_RX_RX2 = (SFDX_RX + | SFDX_TX + | LED_RX); +static const boost::uint32_t STATE_RX_TXRX = (SRX_RX + | SRX_TX + | LED_TXRX_RX); +static const boost::uint32_t STATE_FDX_TXRX = (TX_ENABLE + | SFDX_RX + | SFDX_TX + | LED_TXRX_TX + | LED_RX); +static const boost::uint32_t STATE_TX_TXRX = (TX_ENABLE + | SFDX_RX + | SFDX_TX + | LED_TXRX_TX); + +using namespace uhd::usrp; + +class n230_frontend_ctrl_impl : public n230_frontend_ctrl +{ +public: + n230_frontend_ctrl_impl( + radio_ctrl_core_3000::sptr core_ctrl, + fpga::core_misc_reg_t& core_misc_reg, + ad9361_ctrl::sptr codec_ctrl, + const std::vector<gpio_atr::gpio_atr_3000::sptr>& gpio_cores + ): _core_ctrl(core_ctrl), + _codec_ctrl(codec_ctrl), + _gpio_cores(gpio_cores), + _core_misc_reg(core_misc_reg) + { + } + + virtual ~n230_frontend_ctrl_impl() + { + } + + void set_antenna_sel(const size_t which, const std::string &ant) + { + if (ant != "TX/RX" and ant != "RX2") + throw uhd::value_error("n230: unknown RX antenna option: " + ant); + + _fe_states[which].rx_ant = ant; + _flush_atr_state(); + } + + void set_stream_state(const fe_state_t fe0_state_, const fe_state_t fe1_state_) + { + //Update soft-state + _fe_states[0].state = fe0_state_; + _fe_states[1].state = fe1_state_; + + const fe_state_t fe0_state = _fe_states[0].state; + const fe_state_t fe1_state = (_gpio_cores.size() > 1) ? _fe_states[1].state : NONE_STREAMING; + + const size_t num_tx = (_is_tx(fe0_state) ? 1 : 0) + (_is_tx(fe1_state) ? 1 : 0); + const size_t num_rx = (_is_rx(fe0_state) ? 1 : 0) + (_is_rx(fe1_state) ? 1 : 0); + + //setup the active chains in the codec + if ((num_rx + num_tx) == 0) { + _codec_ctrl->set_active_chains( + true, false, + true, false); //enable something + } else { + _codec_ctrl->set_active_chains( + _is_tx(fe0_state), _is_tx(fe1_state), + _is_rx(fe0_state), _is_rx(fe1_state)); + } + + _core_misc_reg.flush(); + //atrs change based on enables + _flush_atr_state(); + } + + + void set_stream_state(const size_t which, const fe_state_t state) + { + if (which == 0) { + set_stream_state(state, _fe_states[1].state); + } else if (which == 1) { + set_stream_state(_fe_states[0].state, state); + } else { + throw uhd::value_error( + str(boost::format("n230: unknown stream index option: %d") % which) + ); + } + } + + void set_bandsel(const std::string& which, double freq) + { + using namespace n230::fpga; + + if(which[0] == 'R') { + if(freq < 2.2e9) { + _core_misc_reg.set(core_misc_reg_t::RX_BANDSEL_A, 0); + _core_misc_reg.set(core_misc_reg_t::RX_BANDSEL_B, 0); + _core_misc_reg.set(core_misc_reg_t::RX_BANDSEL_C, 1); + } else if((freq >= 2.2e9) && (freq < 4e9)) { + _core_misc_reg.set(core_misc_reg_t::RX_BANDSEL_A, 0); + _core_misc_reg.set(core_misc_reg_t::RX_BANDSEL_B, 1); + _core_misc_reg.set(core_misc_reg_t::RX_BANDSEL_C, 0); + } else if((freq >= 4e9) && (freq <= 6e9)) { + _core_misc_reg.set(core_misc_reg_t::RX_BANDSEL_A, 1); + _core_misc_reg.set(core_misc_reg_t::RX_BANDSEL_B, 0); + _core_misc_reg.set(core_misc_reg_t::RX_BANDSEL_C, 0); + } else { + UHD_THROW_INVALID_CODE_PATH(); + } + } else if(which[0] == 'T') { + if(freq < 2.5e9) { + _core_misc_reg.set(core_misc_reg_t::TX_BANDSEL_A, 0); + _core_misc_reg.set(core_misc_reg_t::TX_BANDSEL_B, 1); + } else if((freq >= 2.5e9) && (freq <= 6e9)) { + _core_misc_reg.set(core_misc_reg_t::TX_BANDSEL_A, 1); + _core_misc_reg.set(core_misc_reg_t::TX_BANDSEL_B, 0); + } else { + UHD_THROW_INVALID_CODE_PATH(); + } + } else { + UHD_THROW_INVALID_CODE_PATH(); + } + + _core_misc_reg.flush(); + } + + void set_self_test_mode(self_test_mode_t mode) + { + switch (mode) { + case LOOPBACK_RADIO: { + _core_ctrl->poke32(fpga::sr_addr(fpga::SR_CORE_LOOPBACK), 0x1); + } break; + case LOOPBACK_CODEC: { + _core_ctrl->poke32(fpga::sr_addr(fpga::SR_CORE_LOOPBACK), 0x0); + _codec_ctrl->data_port_loopback(true); + } break; + //Default = disable + default: + case LOOPBACK_DISABLED: { + _core_ctrl->poke32(fpga::sr_addr(fpga::SR_CORE_LOOPBACK), 0x0); + _codec_ctrl->data_port_loopback(false); + } break; + } + } + +private: + void _flush_atr_state() + { + for (size_t i = 0; i < _gpio_cores.size(); i++) { + const fe_state_cache_t& fe_state_cache = _fe_states[i]; + const bool enb_rx = _is_rx(fe_state_cache.state); + const bool enb_tx = _is_tx(fe_state_cache.state); + const bool is_rx2 = (fe_state_cache.rx_ant == "RX2"); + const size_t rxonly = (enb_rx)? ((is_rx2)? STATE_RX_RX2 : STATE_RX_TXRX) : STATE_OFF; + const size_t txonly = (enb_tx)? (STATE_TX_TXRX) : STATE_OFF; + size_t fd = STATE_OFF; + if (enb_rx and enb_tx) fd = STATE_FDX_TXRX; + if (enb_rx and not enb_tx) fd = rxonly; + if (not enb_rx and enb_tx) fd = txonly; + _gpio_cores[i]->set_atr_reg(gpio_atr::ATR_REG_IDLE, STATE_OFF); + _gpio_cores[i]->set_atr_reg(gpio_atr::ATR_REG_RX_ONLY, rxonly); + _gpio_cores[i]->set_atr_reg(gpio_atr::ATR_REG_TX_ONLY, txonly); + _gpio_cores[i]->set_atr_reg(gpio_atr::ATR_REG_FULL_DUPLEX, fd); + } + } + + inline static bool _is_tx(const fe_state_t state) + { + return state == TX_STREAMING || state == TXRX_STREAMING; + } + + inline static bool _is_rx(const fe_state_t state) + { + return state == RX_STREAMING || state == TXRX_STREAMING; + } + +private: + struct fe_state_cache_t { + fe_state_cache_t() : state(NONE_STREAMING), rx_ant("RX2") + {} + fe_state_t state; + std::string rx_ant; + }; + + radio_ctrl_core_3000::sptr _core_ctrl; + ad9361_ctrl::sptr _codec_ctrl; + std::vector<gpio_atr::gpio_atr_3000::sptr> _gpio_cores; + fpga::core_misc_reg_t& _core_misc_reg; + uhd::dict<size_t, fe_state_cache_t> _fe_states; +}; + +}}} //namespace + +using namespace uhd::usrp::n230; + +n230_frontend_ctrl::sptr n230_frontend_ctrl::make( + radio_ctrl_core_3000::sptr core_ctrl, + fpga::core_misc_reg_t& core_misc_reg, + ad9361_ctrl::sptr codec_ctrl, + const std::vector<gpio_atr::gpio_atr_3000::sptr>& gpio_cores) +{ + return sptr(new n230_frontend_ctrl_impl(core_ctrl, core_misc_reg, codec_ctrl, gpio_cores)); +} + diff --git a/host/lib/usrp/n230/n230_frontend_ctrl.hpp b/host/lib/usrp/n230/n230_frontend_ctrl.hpp new file mode 100644 index 000000000..377d23ba8 --- /dev/null +++ b/host/lib/usrp/n230/n230_frontend_ctrl.hpp @@ -0,0 +1,76 @@ +// +// Copyright 2013-2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_N230_FRONTEND_CTRL_HPP +#define INCLUDED_N230_FRONTEND_CTRL_HPP + +#include "radio_ctrl_core_3000.hpp" +#include "ad9361_ctrl.hpp" +#include "gpio_atr_3000.hpp" +#include <uhd/types/sensors.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include <vector> +#include "n230_fpga_defs.h" + +namespace uhd { namespace usrp { namespace n230 { + +enum fe_state_t { + NONE_STREAMING, TX_STREAMING, RX_STREAMING, TXRX_STREAMING +}; + +enum self_test_mode_t { + LOOPBACK_DISABLED, LOOPBACK_RADIO, LOOPBACK_CODEC +}; + + +class n230_frontend_ctrl : boost::noncopyable +{ +public: + typedef boost::shared_ptr<n230_frontend_ctrl> sptr; + + static sptr make( + radio_ctrl_core_3000::sptr core_ctrl, + fpga::core_misc_reg_t& core_misc_reg, + ad9361_ctrl::sptr codec_ctrl, + const std::vector<gpio_atr::gpio_atr_3000::sptr>& gpio_cores); + + virtual ~n230_frontend_ctrl() {} + + virtual void set_antenna_sel( + const size_t which, + const std::string &ant) = 0; + + virtual void set_stream_state( + const size_t which, + const fe_state_t state) = 0; + + virtual void set_stream_state( + const fe_state_t fe0_state, + const fe_state_t fe1_state) = 0; + + virtual void set_bandsel( + const std::string& which, + double freq) = 0; + + virtual void set_self_test_mode( + self_test_mode_t mode) = 0; +}; + +}}} //namespace + +#endif /* INCLUDED_N230_FRONTEND_CTRL_HPP */ diff --git a/host/lib/usrp/n230/n230_fw_defs.h b/host/lib/usrp/n230/n230_fw_defs.h new file mode 100644 index 000000000..fbdc67ebb --- /dev/null +++ b/host/lib/usrp/n230/n230_fw_defs.h @@ -0,0 +1,137 @@ +// +// Copyright 2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_N230_FW_DEFS_H +#define INCLUDED_N230_FW_DEFS_H + +#include <stdint.h> + +/*! + * Constants specific to N230 firmware. + * This header is shared by the firmware and host code. + * Therefore, this header may only contain valid C code. + * However, if it is included from within the host code, + * it will be namespaced appropriately + */ +#ifdef __cplusplus +namespace uhd { +namespace usrp { +namespace n230 { +namespace fw { +#endif + +static inline uint32_t reg_addr(uint32_t base, uint32_t offset) { + return ((base) + (offset)*4); +} + +/******************************************************************* + * Global + *******************************************************************/ +static const uint32_t CPU_CLOCK_FREQ = 80000000; +static const uint32_t PER_MILLISEC_CRON_JOBID = 0; +static const uint32_t PER_SECOND_CRON_JOBID = 1; + +/******************************************************************* + * Wishbone slave addresses + *******************************************************************/ +static const uint32_t WB_MAIN_RAM_BASE = 0x0000; +static const uint32_t WB_PKT_RAM_BASE = 0x8000; +static const uint32_t WB_SBRB_BASE = 0xa000; +static const uint32_t WB_SPI_FLASH_BASE = 0xb000; +static const uint32_t WB_ETH0_MAC_BASE = 0xc000; +static const uint32_t WB_ETH1_MAC_BASE = 0xd000; +static const uint32_t WB_XB_SBRB_BASE = 0xe000; +static const uint32_t WB_ETH0_I2C_BASE = 0xf600; +static const uint32_t WB_ETH1_I2C_BASE = 0xf700; +static const uint32_t WB_DBG_UART_BASE = 0xf900; + +/******************************************************************* + * Seting Register Base addresses + *******************************************************************/ +static const uint32_t SR_ZPU_SW_RST = 0; +static const uint32_t SR_ZPU_BOOT_DONE = 1; +static const uint32_t SR_ZPU_LEDS = 2; +static const uint32_t SR_ZPU_XB_LOCAL = 4; +static const uint32_t SR_ZPU_SFP_CTRL0 = 16; +static const uint32_t SR_ZPU_SFP_CTRL1 = 17; +static const uint32_t SR_ZPU_ETHINT0 = 64; +static const uint32_t SR_ZPU_ETHINT1 = 80; + +static const uint32_t SR_ZPU_SW_RST_NONE = 0x0; +static const uint32_t SR_ZPU_SW_RST_PHY = 0x1; +static const uint32_t SR_ZPU_SW_RST_RADIO = 0x2; + +/******************************************************************* + * Readback addresses + *******************************************************************/ +static const uint32_t RB_ZPU_COMPAT = 0; +static const uint32_t RB_ZPU_COUNTER = 1; +static const uint32_t RB_ZPU_SFP_STATUS0 = 2; +static const uint32_t RB_ZPU_SFP_STATUS1 = 3; +static const uint32_t RB_ZPU_ETH0_PKT_CNT = 6; +static const uint32_t RB_ZPU_ETH1_PKT_CNT = 7; + +/******************************************************************* + * Ethernet + *******************************************************************/ +static const uint32_t WB_PKT_RAM_CTRL_OFFSET = 0x1FFC; + +static const uint32_t SR_ZPU_ETHINT_FRAMER_BASE = 0; +static const uint32_t SR_ZPU_ETHINT_DISPATCHER_BASE = 8; + +//Eth framer constants +static const uint32_t ETH_FRAMER_SRC_MAC_HI = 0; +static const uint32_t ETH_FRAMER_SRC_MAC_LO = 1; +static const uint32_t ETH_FRAMER_SRC_IP_ADDR = 2; +static const uint32_t ETH_FRAMER_SRC_UDP_PORT = 3; +static const uint32_t ETH_FRAMER_DST_RAM_ADDR = 4; +static const uint32_t ETH_FRAMER_DST_IP_ADDR = 5; +static const uint32_t ETH_FRAMER_DST_UDP_MAC = 6; +static const uint32_t ETH_FRAMER_DST_MAC_LO = 7; + +/******************************************************************* + * CODEC + *******************************************************************/ +static const uint32_t CODEC_SPI_CLOCK_FREQ = 4000000; //4MHz +static const uint32_t ADF4001_SPI_CLOCK_FREQ = 200000; //200kHz + +/******************************************************************* + * UART + *******************************************************************/ +static const uint32_t DBG_UART_BAUD = 115200; + +/******************************************************************* + * Build Compatability Numbers + *******************************************************************/ +static const uint8_t PRODUCT_NUM = 0x01; +static const uint8_t COMPAT_MAJOR = 0x00; +static const uint16_t COMPAT_MINOR = 0x0000; + +static inline uint8_t get_prod_num(uint32_t compat_reg) { + return (compat_reg >> 24) & 0xFF; +} +static inline uint8_t get_compat_major(uint32_t compat_reg) { + return (compat_reg >> 16) & 0xFF; +} +static inline uint8_t get_compat_minor(uint32_t compat_reg) { + return compat_reg & 0xFFFF; +} + +#ifdef __cplusplus +}}}} //namespace +#endif +#endif /* INCLUDED_N230_FW_DEFS_H */ diff --git a/host/lib/usrp/n230/n230_fw_host_iface.h b/host/lib/usrp/n230/n230_fw_host_iface.h new file mode 100644 index 000000000..0391af0d9 --- /dev/null +++ b/host/lib/usrp/n230/n230_fw_host_iface.h @@ -0,0 +1,128 @@ +// +// Copyright 2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_N230_FW_HOST_IFACE_H +#define INCLUDED_N230_FW_HOST_IFACE_H + +#include <stdint.h> + +/*! + * Structs and constants for N230 communication between firmware and host. + * This header is shared by the firmware and host code. + * Therefore, this header may only contain valid C code. + */ +#ifdef __cplusplus +extern "C" { +#endif + +//-------------------------------------------------- +// Ethernet related +// +#define N230_DEFAULT_ETH0_MAC {0x00, 0x50, 0xC2, 0x85, 0x3f, 0xff} +#define N230_DEFAULT_ETH1_MAC {0x00, 0x50, 0xC2, 0x85, 0x3f, 0x33} +#define N230_DEFAULT_ETH0_IP (192 << 24 | 168 << 16 | 10 << 8 | 2 << 0) +#define N230_DEFAULT_ETH1_IP (192 << 24 | 168 << 16 | 20 << 8 | 2 << 0) +#define N230_DEFAULT_ETH0_MASK (255 << 24 | 255 << 16 | 255 << 8 | 0 << 0) +#define N230_DEFAULT_ETH1_MASK (255 << 24 | 255 << 16 | 255 << 8 | 0 << 0) +#define N230_DEFAULT_GATEWAY (192 << 24 | 168 << 16 | 10 << 8 | 1 << 0) + +#define N230_FW_COMMS_UDP_PORT 49152 +#define N230_FW_COMMS_CVITA_PORT 49153 +#define N230_FW_COMMS_FLASH_PROG_PORT 49154 +// +//-------------------------------------------------- + +//-------------------------------------------------- +// Memory shared with host +// +#define N230_FW_HOST_SHMEM_BASE_ADDR 0x10000 +#define N230_FW_HOST_SHMEM_RW_BASE_ADDR 0x1000C +#define N230_FW_HOST_SHMEM_NUM_WORDS (sizeof(n230_host_shared_mem_data_t)/sizeof(uint32_t)) + +#define N230_FW_HOST_SHMEM_MAX_ADDR \ + (N230_FW_HOST_SHMEM_BASE_ADDR + ((N230_FW_HOST_SHMEM_NUM_WORDS - 1) * sizeof(uint32_t))) + +#define N230_FW_HOST_SHMEM_OFFSET(member) \ + (N230_FW_HOST_SHMEM_BASE_ADDR + ((uint32_t)offsetof(n230_host_shared_mem_data_t, member))) + +//The shared memory block can only be accessed on 32-bit boundaries +typedef struct { //All fields must be 32-bit wide to avoid packing directives + //Read-Only fields (N230_FW_HOST_SHMEM_BASE_ADDR) + uint32_t fw_compat_num; //Compat number must be at offset 0 + uint32_t fw_version_hash; + uint32_t claim_status; + + //Read-Write fields (N230_FW_HOST_SHMEM_RW_BASE_ADDR) + uint32_t scratch; + uint32_t claim_time; + uint32_t claim_src; +} n230_host_shared_mem_data_t; + +typedef union +{ + uint32_t buff[N230_FW_HOST_SHMEM_NUM_WORDS]; + n230_host_shared_mem_data_t data; +} n230_host_shared_mem_t; + +#define N230_FW_PRODUCT_ID 1 +#define N230_FW_COMPAT_NUM_MAJOR 32 +#define N230_FW_COMPAT_NUM_MINOR 0 +#define N230_FW_COMPAT_NUM (((N230_FW_COMPAT_NUM_MAJOR & 0xFF) << 16) | (N230_FW_COMPAT_NUM_MINOR & 0xFFFF)) +// +//-------------------------------------------------- + +//-------------------------------------------------- +// Flash read-write interface for host +// +#define N230_FLASH_COMM_FLAGS_ACK 0x00000001 +#define N230_FLASH_COMM_FLAGS_CMD_MASK 0x00000FF0 +#define N230_FLASH_COMM_FLAGS_ERROR_MASK 0xFF000000 + +#define N230_FLASH_COMM_CMD_READ_NV_DATA 0x00000010 +#define N230_FLASH_COMM_CMD_WRITE_NV_DATA 0x00000020 +#define N230_FLASH_COMM_CMD_READ_FPGA 0x00000030 +#define N230_FLASH_COMM_CMD_WRITE_FPGA 0x00000040 +#define N230_FLASH_COMM_CMD_ERASE_FPGA 0x00000050 + +#define N230_FLASH_COMM_ERR_PKT_ERROR 0x80000000 +#define N230_FLASH_COMM_ERR_CMD_ERROR 0x40000000 +#define N230_FLASH_COMM_ERR_SIZE_ERROR 0x20000000 + +#define N230_FLASH_COMM_MAX_PAYLOAD_SIZE 128 + +typedef struct +{ + uint32_t flags; + uint32_t seq; + uint32_t offset; + uint32_t size; + uint8_t data[N230_FLASH_COMM_MAX_PAYLOAD_SIZE]; +} n230_flash_prog_t; +// +//-------------------------------------------------- + +#define N230_HW_REVISION_COMPAT 1 +#define N230_HW_REVISION_MIN 1 + + +#define N230_CLAIMER_TIMEOUT_IN_MS 2000 + +#ifdef __cplusplus +} +#endif + +#endif /* INCLUDED_N230_FW_HOST_IFACE_H */ diff --git a/host/lib/usrp/n230/n230_image_loader.cpp b/host/lib/usrp/n230/n230_image_loader.cpp new file mode 100644 index 000000000..9dd4a252d --- /dev/null +++ b/host/lib/usrp/n230/n230_image_loader.cpp @@ -0,0 +1,209 @@ +// +// Copyright 2016 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <fstream> +#include <algorithm> +#include <uhd/image_loader.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/utils/byteswap.hpp> +#include <uhd/utils/paths.hpp> +#include <uhd/transport/udp_simple.hpp> +#include <boost/algorithm/string.hpp> +#include <boost/filesystem.hpp> +#include <boost/format.hpp> +#include "n230_fw_host_iface.h" +#include "n230_impl.hpp" + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; + +struct xil_bitfile_hdr_t { + xil_bitfile_hdr_t(): + valid(false), userid(0), product(""), + fpga(""), timestamp(""), filesize(0) + {} + + bool valid; + boost::uint32_t userid; + std::string product; + std::string fpga; + std::string timestamp; + boost::uint32_t filesize; +}; + +static inline boost::uint16_t _to_uint16(boost::uint8_t* buf) { + return (static_cast<boost::uint16_t>(buf[0]) << 8) | + (static_cast<boost::uint16_t>(buf[1]) << 0); +} + +static inline boost::uint32_t _to_uint32(boost::uint8_t* buf) { + return (static_cast<boost::uint32_t>(buf[0]) << 24) | + (static_cast<boost::uint32_t>(buf[1]) << 16) | + (static_cast<boost::uint32_t>(buf[2]) << 8) | + (static_cast<boost::uint32_t>(buf[3]) << 0); +} + +static void _parse_bitfile_header(const std::string& filepath, xil_bitfile_hdr_t& hdr) { + // Read header into memory + std::ifstream img_file(filepath.c_str(), std::ios::binary); + static const size_t MAX_HDR_SIZE = 1024; + boost::scoped_array<char> hdr_buf(new char[MAX_HDR_SIZE]); + img_file.seekg(0, std::ios::beg); + img_file.read(hdr_buf.get(), MAX_HDR_SIZE); + img_file.close(); + + //Parse header + size_t ptr = 0; + boost::uint8_t* buf = reinterpret_cast<boost::uint8_t*>(hdr_buf.get()); //Shortcut + + boost::uint8_t signature[10] = {0x00, 0x09, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0}; + if (memcmp(buf, signature, 10) == 0) { //Validate signature + ptr += _to_uint16(buf + ptr) + 2; + ptr += _to_uint16(buf + ptr) + 1; + + std::string fields[4]; + for (size_t i = 0; i < 4; i++) { + size_t key = buf[ptr++] - 'a'; + boost::uint16_t len = _to_uint16(buf + ptr); ptr += 2; + fields[key] = std::string(reinterpret_cast<char*>(buf + ptr), size_t(len)); ptr += len; + } + + hdr.filesize = _to_uint32(buf + ++ptr); ptr += 4; + hdr.fpga = fields[1]; + hdr.timestamp = fields[2] + std::string(" ") + fields[3]; + + std::vector<std::string> tokens; + boost::split(tokens, fields[0], boost::is_any_of(";")); + if (tokens.size() == 3) { + hdr.product = tokens[0]; + std::vector<std::string> uidtokens; + boost::split(uidtokens, tokens[1], boost::is_any_of("=")); + if (uidtokens.size() == 2 and uidtokens[0] == "UserID") { + std::stringstream stream; + stream << uidtokens[1]; + stream >> std::hex >> hdr.userid; + hdr.valid = true; + } + } + } +} + +static size_t _send_and_recv( + udp_simple::sptr xport, + n230_flash_prog_t& out, n230_flash_prog_t& in) +{ + static boost::uint32_t seqno = 0; + out.seq = htonx<boost::uint32_t>(++seqno); + xport->send(boost::asio::buffer(&out, sizeof(n230_flash_prog_t))); + size_t len = xport->recv(boost::asio::buffer(&in, udp_simple::mtu), 0.5); + if (len != sizeof(n230_flash_prog_t) or ntohx<boost::uint32_t>(in.seq) != seqno) { + throw uhd::io_error("Error communicating with the device."); + } + return len; +} + + +static bool n230_image_loader(const image_loader::image_loader_args_t &loader_args){ + // Run discovery routine and ensure that exactly one N230 is specified + device_addrs_t devs = usrp::n230::n230_impl::n230_find(loader_args.args); + if (devs.size() == 0 or !loader_args.load_fpga) return false; + if (devs.size() > 1) { + throw uhd::runtime_error("Multiple devices match the specified args. To avoid accidentally updating the " + "wrong device, please narrow the search by specifying a unique \"addr\" argument."); + } + device_addr_t dev = devs[0]; + + // Sanity check the specified bitfile + std::string fpga_img_path = loader_args.fpga_path; + bool fpga_path_specified = !loader_args.fpga_path.empty(); + if (not fpga_path_specified) { + fpga_img_path = ( + fs::path(uhd::get_pkg_path()) / "share" / "uhd" / "images" / "usrp_n230_fpga.bit" + ).string(); + } + + if (not boost::filesystem::exists(fpga_img_path)) { + if (fpga_path_specified) { + throw uhd::runtime_error(str(boost::format("The file \"%s\" does not exist.") % fpga_img_path)); + } else { + throw uhd::runtime_error(str(boost::format( + "Could not find the default FPGA image: %s.\n" + "Either specify the --fpga-path argument or download the latest prebuilt images:\n" + "%s\n") + % fpga_img_path % print_utility_error("uhd_images_downloader.py"))); + } + } + xil_bitfile_hdr_t hdr; + _parse_bitfile_header(fpga_img_path, hdr); + + // Create a UDP communication link + udp_simple::sptr udp_xport = + udp_simple::make_connected(dev["addr"],BOOST_STRINGIZE(N230_FW_COMMS_FLASH_PROG_PORT)); + + if (hdr.valid and hdr.product == "n230") { + if (hdr.userid != 0x5AFE0000) { + std::cout << boost::format("Unit: USRP N230 (%s, %s)\n-- FPGA Image: %s\n") + % dev["addr"] % dev["serial"] % fpga_img_path; + + // Write image + std::ifstream image(fpga_img_path.c_str(), std::ios::binary); + size_t image_size = boost::filesystem::file_size(fpga_img_path); + + static const size_t SECTOR_SIZE = 65536; + static const size_t IMAGE_BASE = 0x400000; + + n230_flash_prog_t out, in; + size_t bytes_written = 0; + while (bytes_written < image_size) { + size_t payload_size = std::min<size_t>(image_size - bytes_written, N230_FLASH_COMM_MAX_PAYLOAD_SIZE); + if (bytes_written % SECTOR_SIZE == 0) { + out.flags = htonx<boost::uint32_t>(N230_FLASH_COMM_FLAGS_ACK|N230_FLASH_COMM_CMD_ERASE_FPGA); + out.offset = htonx<boost::uint32_t>(bytes_written + IMAGE_BASE); + out.size = htonx<boost::uint32_t>(payload_size); + _send_and_recv(udp_xport, out, in); + } + out.flags = htonx<boost::uint32_t>(N230_FLASH_COMM_FLAGS_ACK|N230_FLASH_COMM_CMD_WRITE_FPGA); + out.offset = htonx<boost::uint32_t>(bytes_written + IMAGE_BASE); + out.size = htonx<boost::uint32_t>(payload_size); + image.read((char*)out.data, payload_size); + _send_and_recv(udp_xport, out, in); + bytes_written += ntohx<boost::uint32_t>(in.size); + std::cout << boost::format("\r-- Loading FPGA image: %d%%") + % (int(double(bytes_written) / double(image_size) * 100.0)) + << std::flush; + } + std::cout << std::endl << "FPGA image loaded successfully." << std::endl; + std::cout << std::endl << "Power-cycle the device to run the image." << std::endl; + return true; + } else { + throw uhd::runtime_error("This utility cannot burn a failsafe image!"); + } + } else { + throw uhd::runtime_error(str(boost::format("The file at path \"%s\" is not a valid USRP N230 FPGA image.") + % fpga_img_path)); + } +} + +UHD_STATIC_BLOCK(register_n230_image_loader){ + std::string recovery_instructions = "Aborting. Your USRP N230 device will likely boot in safe mode.\n" + "Please re-run this command with the additional \"safe_mode\" device argument\n" + "to recover your device."; + + image_loader::register_image_loader("n230", n230_image_loader, recovery_instructions); +} diff --git a/host/lib/usrp/n230/n230_impl.cpp b/host/lib/usrp/n230/n230_impl.cpp new file mode 100644 index 000000000..5e8aa37b7 --- /dev/null +++ b/host/lib/usrp/n230/n230_impl.cpp @@ -0,0 +1,591 @@ +// +// Copyright 2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "n230_impl.hpp" + +#include "usrp3_fw_ctrl_iface.hpp" +#include "validate_subdev_spec.hpp" +#include <uhd/utils/static.hpp> +#include <uhd/transport/if_addrs.hpp> +#include <uhd/transport/udp_zero_copy.hpp> +#include <uhd/usrp/subdev_spec.hpp> +#include <uhd/utils/byteswap.hpp> +#include <uhd/utils/log.hpp> +#include <uhd/utils/msg.hpp> +#include <uhd/types/sensors.hpp> +#include <uhd/types/ranges.hpp> +#include <uhd/types/direction.hpp> +#include <uhd/usrp/mboard_eeprom.hpp> +#include <uhd/usrp/dboard_eeprom.hpp> +#include <uhd/usrp/gps_ctrl.hpp> +#include <boost/format.hpp> +#include <boost/foreach.hpp> +#include <boost/lexical_cast.hpp> +#include <boost/bind.hpp> +#include <boost/algorithm/string.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/asio/ip/address_v4.hpp> +#include <boost/asio.hpp> //used for htonl and ntohl +#include <boost/make_shared.hpp> + +#include "../common/fw_comm_protocol.h" +#include "n230_defaults.h" +#include "n230_fpga_defs.h" +#include "n230_fw_defs.h" +#include "n230_fw_host_iface.h" + +namespace uhd { namespace usrp { namespace n230 { + +using namespace uhd::transport; +namespace asio = boost::asio; + +//---------------------------------------------------------- +// Static device registration with framework +//---------------------------------------------------------- +UHD_STATIC_BLOCK(register_n230_device) +{ + device::register_device(&n230_impl::n230_find, &n230_impl::n230_make, device::USRP); +} + +//---------------------------------------------------------- +// Device discovery +//---------------------------------------------------------- +uhd::device_addrs_t n230_impl::n230_find(const uhd::device_addr_t &multi_dev_hint) +{ + //handle the multi-device discovery + device_addrs_t hints = separate_device_addr(multi_dev_hint); + if (hints.size() > 1){ + device_addrs_t found_devices; + std::string error_msg; + BOOST_FOREACH(const device_addr_t &hint_i, hints){ + device_addrs_t found_devices_i = n230_find(hint_i); + if (found_devices_i.size() != 1) error_msg += str(boost::format( + "Could not resolve device hint \"%s\" to a single device." + ) % hint_i.to_string()); + else found_devices.push_back(found_devices_i[0]); + } + if (found_devices.empty()) return device_addrs_t(); + if (not error_msg.empty()) throw uhd::value_error(error_msg); + return device_addrs_t(1, combine_device_addrs(found_devices)); + } + + //initialize the hint for a single device case + UHD_ASSERT_THROW(hints.size() <= 1); + hints.resize(1); //in case it was empty + device_addr_t hint = hints[0]; + device_addrs_t n230_addrs; + + //return an empty list of addresses when type is set to non-n230 + if (hint.has_key("type") and hint["type"] != "n230") return n230_addrs; + + //Return an empty list of addresses when a resource is specified, + //since a resource is intended for a different, non-networked, device. + if (hint.has_key("resource")) return n230_addrs; + + //if no address was specified, send a broadcast on each interface + if (not hint.has_key("addr")) { + BOOST_FOREACH(const if_addrs_t &if_addrs, get_if_addrs()) { + //avoid the loopback device + if (if_addrs.inet == asio::ip::address_v4::loopback().to_string()) continue; + + //create a new hint with this broadcast address + device_addr_t new_hint = hint; + new_hint["addr"] = if_addrs.bcast; + + //call discover with the new hint and append results + device_addrs_t new_n230_addrs = n230_find(new_hint); + n230_addrs.insert(n230_addrs.begin(), + new_n230_addrs.begin(), new_n230_addrs.end() + ); + } + return n230_addrs; + } + + std::vector<std::string> discovered_addrs = + usrp3::usrp3_fw_ctrl_iface::discover_devices( + hint["addr"], BOOST_STRINGIZE(N230_FW_COMMS_UDP_PORT), N230_FW_PRODUCT_ID); + + BOOST_FOREACH(const std::string& addr, discovered_addrs) + { + device_addr_t new_addr; + new_addr["type"] = "n230"; + new_addr["addr"] = addr; + + //Attempt a simple 2-way communication with a connected socket. + //Reason: Although the USRP will respond the broadcast above, + //we may not be able to communicate directly (non-broadcast). + udp_simple::sptr ctrl_xport = udp_simple::make_connected(new_addr["addr"], BOOST_STRINGIZE(N230_FW_COMMS_UDP_PORT)); + + //Corner case: If two devices have the same IP but different MAC + //addresses and are used back-to-back it takes a while for ARP tables + //on the host to update in which period brodcasts will respond but + //connected communication can fail. Retry the following call to allow + //the stack to update + size_t first_conn_retries = 10; + usrp3::usrp3_fw_ctrl_iface::sptr fw_ctrl; + while (first_conn_retries > 0) { + try { + fw_ctrl = usrp3::usrp3_fw_ctrl_iface::make(ctrl_xport, N230_FW_PRODUCT_ID, false /*verbose*/); + break; + } catch (uhd::io_error& ex) { + boost::this_thread::sleep(boost::posix_time::milliseconds(500)); + first_conn_retries--; + } + } + if (first_conn_retries > 0) { + uint32_t compat_reg = fw_ctrl->peek32(fw::reg_addr(fw::WB_SBRB_BASE, fw::RB_ZPU_COMPAT)); + if (fw::get_prod_num(compat_reg) == fw::PRODUCT_NUM) { + if (!n230_resource_manager::is_device_claimed(fw_ctrl)) { + //Not claimed by another process or host + try { + //Try to read the EEPROM to get the name and serial + n230_eeprom_manager eeprom_mgr(new_addr["addr"]); + const mboard_eeprom_t& eeprom = eeprom_mgr.get_mb_eeprom(); + new_addr["name"] = eeprom["name"]; + new_addr["serial"] = eeprom["serial"]; + } + catch(const std::exception &) + { + //set these values as empty string so the device may still be found + //and the filter's below can still operate on the discovered device + new_addr["name"] = ""; + new_addr["serial"] = ""; + } + //filter the discovered device below by matching optional keys + if ((not hint.has_key("name") or hint["name"] == new_addr["name"]) and + (not hint.has_key("serial") or hint["serial"] == new_addr["serial"])) + { + n230_addrs.push_back(new_addr); + } + } + } + } + } + + return n230_addrs; +} + +/*********************************************************************** + * Make + **********************************************************************/ +device::sptr n230_impl::n230_make(const device_addr_t &device_addr) +{ + return device::sptr(new n230_impl(device_addr)); +} + +/*********************************************************************** + * n230_impl::ctor + **********************************************************************/ +n230_impl::n230_impl(const uhd::device_addr_t& dev_addr) +{ + UHD_MSG(status) << "N230 initialization sequence..." << std::endl; + _dev_args.parse(dev_addr); + _tree = uhd::property_tree::make(); + + //TODO: Only supports one motherboard per device class. + const fs_path mb_path = "/mboards/0"; + + //Initialize addresses + std::vector<std::string> ip_addrs(1, dev_addr["addr"]); + if (dev_addr.has_key("secondary-addr")) { + ip_addrs.push_back(dev_addr["secondary-addr"]); + } + + //Read EEPROM and perform version checks before talking to HW + _eeprom_mgr = boost::make_shared<n230_eeprom_manager>(ip_addrs[0]); + const mboard_eeprom_t& mb_eeprom = _eeprom_mgr->get_mb_eeprom(); + bool recover_mb_eeprom = dev_addr.has_key("recover_mb_eeprom"); + if (recover_mb_eeprom) { + UHD_MSG(warning) << "UHD is operating in EEPROM Recovery Mode which disables hardware version " + "checks.\nOperating in this mode may cause hardware damage and unstable " + "radio performance!"<< std::endl; + } + boost::uint16_t hw_rev = boost::lexical_cast<boost::uint16_t>(mb_eeprom["revision"]); + boost::uint16_t hw_rev_compat = boost::lexical_cast<boost::uint16_t>(mb_eeprom["revision_compat"]); + if (not recover_mb_eeprom) { + if (hw_rev_compat > N230_HW_REVISION_COMPAT) { + throw uhd::runtime_error(str(boost::format( + "Hardware is too new for this software. Please upgrade to a driver that supports hardware revision %d.") + % hw_rev)); + } + } + + //Initialize all subsystems + _resource_mgr = boost::make_shared<n230_resource_manager>(ip_addrs, _dev_args.get_safe_mode()); + _stream_mgr = boost::make_shared<n230_stream_manager>(_dev_args, _resource_mgr, _tree); + + //Build property tree + _initialize_property_tree(mb_path); + + //Debug loopback mode + switch(_dev_args.get_loopback_mode()) { + case n230_device_args_t::LOOPBACK_RADIO: + UHD_MSG(status) << "DEBUG: Running in TX->RX Radio loopback mode.\n"; + _resource_mgr->get_frontend_ctrl().set_self_test_mode(LOOPBACK_RADIO); + break; + case n230_device_args_t::LOOPBACK_CODEC: + UHD_MSG(status) << "DEBUG: Running in TX->RX CODEC loopback mode.\n"; + _resource_mgr->get_frontend_ctrl().set_self_test_mode(LOOPBACK_CODEC); + break; + default: + _resource_mgr->get_frontend_ctrl().set_self_test_mode(LOOPBACK_DISABLED); + break; + } +} + +/*********************************************************************** + * n230_impl::dtor + **********************************************************************/ +n230_impl::~n230_impl() +{ + _stream_mgr.reset(); + _eeprom_mgr.reset(); + _resource_mgr.reset(); + _tree.reset(); +} + +/*********************************************************************** + * n230_impl::get_rx_stream + **********************************************************************/ +rx_streamer::sptr n230_impl::get_rx_stream(const uhd::stream_args_t &args) +{ + return _stream_mgr->get_rx_stream(args); +} + +/*********************************************************************** + * n230_impl::get_tx_stream + **********************************************************************/ +tx_streamer::sptr n230_impl::get_tx_stream(const uhd::stream_args_t &args) +{ + return _stream_mgr->get_tx_stream(args); +} + +/*********************************************************************** + * n230_impl::recv_async_msg + **********************************************************************/ +bool n230_impl::recv_async_msg(uhd::async_metadata_t &async_metadata, double timeout) +{ + return _stream_mgr->recv_async_msg(async_metadata, timeout); +} + +/*********************************************************************** + * _initialize_property_tree + **********************************************************************/ +void n230_impl::_initialize_property_tree(const fs_path& mb_path) +{ + //------------------------------------------------------------------ + // General info + //------------------------------------------------------------------ + _tree->create<std::string>("/name").set("N230 Device"); + + _tree->create<std::string>(mb_path / "name").set("N230"); + _tree->create<std::string>(mb_path / "codename").set("N230"); + _tree->create<std::string>(mb_path / "dboards").set("none"); //No dboards. + + _tree->create<std::string>(mb_path / "fw_version").set(str(boost::format("%u.%u") + % _resource_mgr->get_version(FIRMWARE, COMPAT_MAJOR) + % _resource_mgr->get_version(FIRMWARE, COMPAT_MINOR))); + _tree->create<std::string>(mb_path / "fw_version_hash").set(str(boost::format("%s") + % _resource_mgr->get_version_hash(FIRMWARE))); + _tree->create<std::string>(mb_path / "fpga_version").set(str(boost::format("%u.%u") + % _resource_mgr->get_version(FPGA, COMPAT_MAJOR) + % _resource_mgr->get_version(FPGA, COMPAT_MINOR))); + _tree->create<std::string>(mb_path / "fpga_version_hash").set(str(boost::format("%s") + % _resource_mgr->get_version_hash(FPGA))); + + _tree->create<double>(mb_path / "link_max_rate").set(_resource_mgr->get_max_link_rate()); + + //------------------------------------------------------------------ + // EEPROM + //------------------------------------------------------------------ + _tree->create<mboard_eeprom_t>(mb_path / "eeprom") + .set(_eeprom_mgr->get_mb_eeprom()) //Set first... + .add_coerced_subscriber(boost::bind(&n230_eeprom_manager::write_mb_eeprom, _eeprom_mgr, _1)); //..then enable writer + + //------------------------------------------------------------------ + // Create codec nodes + //------------------------------------------------------------------ + const fs_path rx_codec_path = mb_path / ("rx_codecs") / "A"; + _tree->create<std::string>(rx_codec_path / "name") + .set("N230 RX dual ADC"); + _tree->create<int>(rx_codec_path / "gains"); //Empty because gains are in frontend + + const fs_path tx_codec_path = mb_path / ("tx_codecs") / "A"; + _tree->create<std::string>(tx_codec_path / "name") + .set("N230 TX dual DAC"); + _tree->create<int>(tx_codec_path / "gains"); //Empty because gains are in frontend + + //------------------------------------------------------------------ + // Create clock and time control nodes + //------------------------------------------------------------------ + _tree->create<double>(mb_path / "tick_rate") + .set_coercer(boost::bind(&n230_clk_pps_ctrl::set_tick_rate, _resource_mgr->get_clk_pps_ctrl_sptr(), _1)) + .set_publisher(boost::bind(&n230_clk_pps_ctrl::get_tick_rate, _resource_mgr->get_clk_pps_ctrl_sptr())) + .add_coerced_subscriber(boost::bind(&n230_stream_manager::update_tick_rate, _stream_mgr, _1)); + + //Register time now and pps onto available radio cores + //radio0 is the master + _tree->create<time_spec_t>(mb_path / "time" / "cmd"); + _tree->create<time_spec_t>(mb_path / "time" / "now") + .set_publisher(boost::bind(&time_core_3000::get_time_now, _resource_mgr->get_radio(0).time)); + _tree->create<time_spec_t>(mb_path / "time" / "pps") + .set_publisher(boost::bind(&time_core_3000::get_time_last_pps, _resource_mgr->get_radio(0).time)); + + //Setup time source props + _tree->create<std::string>(mb_path / "time_source" / "value") + .add_coerced_subscriber(boost::bind(&n230_impl::_check_time_source, this, _1)) + .add_coerced_subscriber(boost::bind(&n230_clk_pps_ctrl::set_pps_source, _resource_mgr->get_clk_pps_ctrl_sptr(), _1)) + .set(n230::DEFAULT_TIME_SRC); + static const std::vector<std::string> time_sources = boost::assign::list_of("none")("external")("gpsdo"); + _tree->create<std::vector<std::string> >(mb_path / "time_source" / "options") + .set(time_sources); + + //Setup reference source props + _tree->create<std::string>(mb_path / "clock_source" / "value") + .add_coerced_subscriber(boost::bind(&n230_impl::_check_clock_source, this, _1)) + .add_coerced_subscriber(boost::bind(&n230_clk_pps_ctrl::set_clock_source, _resource_mgr->get_clk_pps_ctrl_sptr(), _1)) + .set(n230::DEFAULT_CLOCK_SRC); + static const std::vector<std::string> clock_sources = boost::assign::list_of("internal")("external")("gpsdo"); + _tree->create<std::vector<std::string> >(mb_path / "clock_source" / "options") + .set(clock_sources); + _tree->create<sensor_value_t>(mb_path / "sensors" / "ref_locked") + .set_publisher(boost::bind(&n230_clk_pps_ctrl::get_ref_locked, _resource_mgr->get_clk_pps_ctrl_sptr())); + + //------------------------------------------------------------------ + // Create frontend mapping + //------------------------------------------------------------------ + _tree->create<subdev_spec_t>(mb_path / "rx_subdev_spec") + .set(subdev_spec_t()) + .add_coerced_subscriber(boost::bind(&n230_impl::_update_rx_subdev_spec, this, _1)); + _tree->create<subdev_spec_t>(mb_path / "tx_subdev_spec") + .set(subdev_spec_t()) + .add_coerced_subscriber(boost::bind(&n230_impl::_update_tx_subdev_spec, this, _1)); + + //------------------------------------------------------------------ + // Create a fake dboard to put frontends in + //------------------------------------------------------------------ + //For completeness we give it a fake EEPROM as well + dboard_eeprom_t db_eeprom; //Default state: ID is 0xffff, Version and serial empty + _tree->create<dboard_eeprom_t>(mb_path / "dboards" / "A" / "rx_eeprom").set(db_eeprom); + _tree->create<dboard_eeprom_t>(mb_path / "dboards" / "A" / "tx_eeprom").set(db_eeprom); + _tree->create<dboard_eeprom_t>(mb_path / "dboards" / "A" / "gdb_eeprom").set(db_eeprom); + + //------------------------------------------------------------------ + // Create radio specific nodes + //------------------------------------------------------------------ + for (size_t radio_instance = 0; radio_instance < fpga::NUM_RADIOS; radio_instance++) { + _initialize_radio_properties(mb_path, radio_instance); + } + //Update tick rate on newly created radio objects + _tree->access<double>(mb_path / "tick_rate").set(_dev_args.get_master_clock_rate()); + + //------------------------------------------------------------------ + // Initialize subdev specs + //------------------------------------------------------------------ + subdev_spec_t rx_spec, tx_spec; + BOOST_FOREACH(const std::string &fe, _tree->list(mb_path / "dboards" / "A" / "rx_frontends")) + { + rx_spec.push_back(subdev_spec_pair_t("A", fe)); + } + BOOST_FOREACH(const std::string &fe, _tree->list(mb_path / "dboards" / "A" / "tx_frontends")) + { + tx_spec.push_back(subdev_spec_pair_t("A", fe)); + } + _tree->access<subdev_spec_t>(mb_path / "rx_subdev_spec").set(rx_spec); + _tree->access<subdev_spec_t>(mb_path / "tx_subdev_spec").set(tx_spec); + + //------------------------------------------------------------------ + // MiniSAS GPIO + //------------------------------------------------------------------ + _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / "DDR") + .set(0) + .add_coerced_subscriber(boost::bind(&gpio_atr::gpio_atr_3000::set_gpio_attr, + _resource_mgr->get_minisas_gpio_ctrl_sptr(0), gpio_atr::GPIO_DDR, _1)); + _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP1" / "DDR") + .set(0) + .add_coerced_subscriber(boost::bind(&gpio_atr::gpio_atr_3000::set_gpio_attr, + _resource_mgr->get_minisas_gpio_ctrl_sptr(1), gpio_atr::GPIO_DDR, _1)); + _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / "OUT") + .set(0) + .add_coerced_subscriber(boost::bind(&gpio_atr::gpio_atr_3000::set_gpio_attr, + _resource_mgr->get_minisas_gpio_ctrl_sptr(0), gpio_atr::GPIO_OUT, _1)); + _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP1" / "OUT") + .set(0) + .add_coerced_subscriber(boost::bind(&gpio_atr::gpio_atr_3000::set_gpio_attr, + _resource_mgr->get_minisas_gpio_ctrl_sptr(1), gpio_atr::GPIO_OUT, _1)); + _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / "READBACK") + .set_publisher(boost::bind(&gpio_atr::gpio_atr_3000::read_gpio, _resource_mgr->get_minisas_gpio_ctrl_sptr(0))); + _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP1" / "READBACK") + .set_publisher(boost::bind(&gpio_atr::gpio_atr_3000::read_gpio, _resource_mgr->get_minisas_gpio_ctrl_sptr(1))); + + //------------------------------------------------------------------ + // GPSDO sensors + //------------------------------------------------------------------ + if (_resource_mgr->is_gpsdo_present()) { + uhd::gps_ctrl::sptr gps_ctrl = _resource_mgr->get_gps_ctrl(); + BOOST_FOREACH(const std::string &name, gps_ctrl->get_sensors()) + { + _tree->create<sensor_value_t>(mb_path / "sensors" / name) + .set_publisher(boost::bind(&gps_ctrl::get_sensor, gps_ctrl, name)); + } + } +} + +/*********************************************************************** + * _initialize_radio_properties + **********************************************************************/ +void n230_impl::_initialize_radio_properties(const fs_path& mb_path, size_t instance) +{ + radio_resource_t& perif = _resource_mgr->get_radio(instance); + + //Time + _tree->access<time_spec_t>(mb_path / "time" / "cmd") + .add_coerced_subscriber(boost::bind(&radio_ctrl_core_3000::set_time, perif.ctrl, _1)); + _tree->access<double>(mb_path / "tick_rate") + .add_coerced_subscriber(boost::bind(&radio_ctrl_core_3000::set_tick_rate, perif.ctrl, _1)); + _tree->access<time_spec_t>(mb_path / "time" / "now") + .add_coerced_subscriber(boost::bind(&time_core_3000::set_time_now, perif.time, _1)); + _tree->access<time_spec_t>(mb_path / "time" / "pps") + .add_coerced_subscriber(boost::bind(&time_core_3000::set_time_next_pps, perif.time, _1)); + + //RX DSP + _tree->access<double>(mb_path / "tick_rate") + .add_coerced_subscriber(boost::bind(&rx_vita_core_3000::set_tick_rate, perif.framer, _1)) + .add_coerced_subscriber(boost::bind(&rx_dsp_core_3000::set_tick_rate, perif.ddc, _1)); + const fs_path rx_dsp_path = mb_path / "rx_dsps" / str(boost::format("%u") % instance); + _tree->create<meta_range_t>(rx_dsp_path / "rate" / "range") + .set_publisher(boost::bind(&rx_dsp_core_3000::get_host_rates, perif.ddc)); + _tree->create<double>(rx_dsp_path / "rate" / "value") + .set_coercer(boost::bind(&rx_dsp_core_3000::set_host_rate, perif.ddc, _1)) + .add_coerced_subscriber(boost::bind(&n230_stream_manager::update_rx_samp_rate, _stream_mgr, instance, _1)) + .set(n230::DEFAULT_RX_SAMP_RATE); + _tree->create<double>(rx_dsp_path / "freq" / "value") + .set_coercer(boost::bind(&rx_dsp_core_3000::set_freq, perif.ddc, _1)) + .set(n230::DEFAULT_DDC_FREQ); + _tree->create<meta_range_t>(rx_dsp_path / "freq" / "range") + .set_publisher(boost::bind(&rx_dsp_core_3000::get_freq_range, perif.ddc)); + _tree->create<stream_cmd_t>(rx_dsp_path / "stream_cmd") + .add_coerced_subscriber(boost::bind(&rx_vita_core_3000::issue_stream_command, perif.framer, _1)); + + //TX DSP + _tree->access<double>(mb_path / "tick_rate") + .add_coerced_subscriber(boost::bind(&tx_dsp_core_3000::set_tick_rate, perif.duc, _1)); + const fs_path tx_dsp_path = mb_path / "tx_dsps" / str(boost::format("%u") % instance); + _tree->create<meta_range_t>(tx_dsp_path / "rate" / "range") + .set_publisher(boost::bind(&tx_dsp_core_3000::get_host_rates, perif.duc)); + _tree->create<double>(tx_dsp_path / "rate" / "value") + .set_coercer(boost::bind(&tx_dsp_core_3000::set_host_rate, perif.duc, _1)) + .add_coerced_subscriber(boost::bind(&n230_stream_manager::update_tx_samp_rate, _stream_mgr, instance, _1)) + .set(n230::DEFAULT_TX_SAMP_RATE); + _tree->create<double>(tx_dsp_path / "freq" / "value") + .set_coercer(boost::bind(&tx_dsp_core_3000::set_freq, perif.duc, _1)) + .set(n230::DEFAULT_DUC_FREQ); + _tree->create<meta_range_t>(tx_dsp_path / "freq" / "range") + .set_publisher(boost::bind(&tx_dsp_core_3000::get_freq_range, perif.duc)); + + //RF Frontend Interfacing + static const std::vector<direction_t> data_directions = boost::assign::list_of(RX_DIRECTION)(TX_DIRECTION); + BOOST_FOREACH(direction_t direction, data_directions) { + const std::string dir_str = (direction == RX_DIRECTION) ? "rx" : "tx"; + const std::string key = boost::to_upper_copy(dir_str) + str(boost::format("%u") % (instance + 1)); + const fs_path rf_fe_path = mb_path / "dboards" / "A" / (dir_str + "_frontends") / ((instance==0)?"A":"B"); + + //CODEC subtree + _resource_mgr->get_codec_mgr().populate_frontend_subtree(_tree->subtree(rf_fe_path), key, direction); + + //User settings + _tree->create<uhd::wb_iface::sptr>(rf_fe_path / "user_settings" / "iface") + .set(perif.user_settings); + + //Setup antenna stuff + if (key[0] == 'R') { + static const std::vector<std::string> ants = boost::assign::list_of("TX/RX")("RX2"); + _tree->create<std::vector<std::string> >(rf_fe_path / "antenna" / "options") + .set(ants); + _tree->create<std::string>(rf_fe_path / "antenna" / "value") + .add_coerced_subscriber(boost::bind(&n230_frontend_ctrl::set_antenna_sel, _resource_mgr->get_frontend_ctrl_sptr(), instance, _1)) + .set("RX2"); + } + if (key[0] == 'T') { + static const std::vector<std::string> ants(1, "TX/RX"); + _tree->create<std::vector<std::string> >(rf_fe_path / "antenna" / "options") + .set(ants); + _tree->create<std::string>(rf_fe_path / "antenna" / "value") + .set("TX/RX"); + } + } +} + +void n230_impl::_update_rx_subdev_spec(const uhd::usrp::subdev_spec_t &spec) +{ + //sanity checking + if (spec.size()) validate_subdev_spec(_tree, spec, "rx"); + UHD_ASSERT_THROW(spec.size() <= fpga::NUM_RADIOS); + + if (spec.size() > 0) { + UHD_ASSERT_THROW(spec[0].db_name == "A"); + UHD_ASSERT_THROW(spec[0].sd_name == "A"); + } + if (spec.size() > 1) { + //TODO we can support swapping at a later date, only this combo is supported + UHD_ASSERT_THROW(spec[1].db_name == "A"); + UHD_ASSERT_THROW(spec[1].sd_name == "B"); + } + + _stream_mgr->update_stream_states(); +} + +void n230_impl::_update_tx_subdev_spec(const uhd::usrp::subdev_spec_t &spec) +{ + //sanity checking + if (spec.size()) validate_subdev_spec(_tree, spec, "tx"); + UHD_ASSERT_THROW(spec.size() <= fpga::NUM_RADIOS); + + if (spec.size() > 0) { + UHD_ASSERT_THROW(spec[0].db_name == "A"); + UHD_ASSERT_THROW(spec[0].sd_name == "A"); + } + if (spec.size() > 1) { + //TODO we can support swapping at a later date, only this combo is supported + UHD_ASSERT_THROW(spec[1].db_name == "A"); + UHD_ASSERT_THROW(spec[1].sd_name == "B"); + } + + _stream_mgr->update_stream_states(); +} + +void n230_impl::_check_time_source(std::string source) +{ + if (source == "gpsdo") + { + uhd::gps_ctrl::sptr gps_ctrl = _resource_mgr->get_gps_ctrl(); + if (not (gps_ctrl and gps_ctrl->gps_detected())) + throw uhd::runtime_error("GPSDO time source not available"); + } +} + +void n230_impl::_check_clock_source(std::string source) +{ + if (source == "gpsdo") + { + uhd::gps_ctrl::sptr gps_ctrl = _resource_mgr->get_gps_ctrl(); + if (not (gps_ctrl and gps_ctrl->gps_detected())) + throw uhd::runtime_error("GPSDO clock source not available"); + } +} + +}}} //namespace diff --git a/host/lib/usrp/n230/n230_impl.hpp b/host/lib/usrp/n230/n230_impl.hpp new file mode 100644 index 000000000..b644dd8a3 --- /dev/null +++ b/host/lib/usrp/n230/n230_impl.hpp @@ -0,0 +1,81 @@ +// +// Copyright 2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_N230_IMPL_HPP +#define INCLUDED_N230_IMPL_HPP + +#include <uhd/property_tree.hpp> +#include <uhd/device.hpp> +#include <uhd/usrp/subdev_spec.hpp> + +#include "n230_device_args.hpp" +#include "n230_eeprom_manager.hpp" +#include "n230_resource_manager.hpp" +#include "n230_stream_manager.hpp" +#include "recv_packet_demuxer_3000.hpp" + +namespace uhd { namespace usrp { namespace n230 { + +class n230_impl : public uhd::device +{ +public: //Functions + // ctor and dtor + n230_impl(const uhd::device_addr_t& device_addr); + virtual ~n230_impl(void); + + //--------------------------------------------------------------------- + // uhd::device interface + // + static sptr make(const uhd::device_addr_t &hint, size_t which = 0); + + //! Make a new receive streamer from the streamer arguments + virtual uhd::rx_streamer::sptr get_rx_stream(const uhd::stream_args_t &args); + + //! Make a new transmit streamer from the streamer arguments + virtual uhd::tx_streamer::sptr get_tx_stream(const uhd::stream_args_t &args); + + //!Receive and asynchronous message from the device. + virtual bool recv_async_msg(uhd::async_metadata_t &async_metadata, double timeout = 0.1); + + //!Registration methods the discovery and factory system. + //[static void register_device(const find_t &find, const make_t &make)] + static uhd::device_addrs_t n230_find(const uhd::device_addr_t &hint); + static uhd::device::sptr n230_make(const uhd::device_addr_t &device_addr); + // + //--------------------------------------------------------------------- + + typedef uhd::transport::bounded_buffer<uhd::async_metadata_t> async_md_type; + +private: //Functions + void _initialize_property_tree(const fs_path& mb_path); + void _initialize_radio_properties(const fs_path& mb_path, size_t instance); + + void _update_rx_subdev_spec(const uhd::usrp::subdev_spec_t &); + void _update_tx_subdev_spec(const uhd::usrp::subdev_spec_t &); + void _check_time_source(std::string); + void _check_clock_source(std::string); + +private: //Classes and Members + n230_device_args_t _dev_args; + boost::shared_ptr<n230_resource_manager> _resource_mgr; + boost::shared_ptr<n230_eeprom_manager> _eeprom_mgr; + boost::shared_ptr<n230_stream_manager> _stream_mgr; +}; + +}}} //namespace + +#endif /* INCLUDED_N230_IMPL_HPP */ diff --git a/host/lib/usrp/n230/n230_resource_manager.cpp b/host/lib/usrp/n230/n230_resource_manager.cpp new file mode 100644 index 000000000..f13dd0b33 --- /dev/null +++ b/host/lib/usrp/n230/n230_resource_manager.cpp @@ -0,0 +1,569 @@ +// +// Copyright 2013 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "n230_resource_manager.hpp" + +#include "usrp3_fw_ctrl_iface.hpp" +#include <uhd/transport/if_addrs.hpp> +#include <uhd/transport/udp_zero_copy.hpp> +#include <uhd/utils/byteswap.hpp> +#include <uhd/utils/msg.hpp> +#include <uhd/utils/platform.hpp> +#include <uhd/utils/paths.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <boost/lexical_cast.hpp> +#include <boost/functional/hash.hpp> +#include <boost/lexical_cast.hpp> +#include <boost/make_shared.hpp> +#include "n230_fw_defs.h" +#include "n230_fw_host_iface.h" + +#define IF_DATA_I_MASK 0xFFF00000 +#define IF_DATA_Q_MASK 0x0000FFF0 + +namespace uhd { namespace usrp { namespace n230 { + +//Constants +static const uint8_t N230_HOST_SRC_ADDR_ETH0 = 0; +static const uint8_t N230_HOST_SRC_ADDR_ETH1 = 1; +static const uint8_t N230_HOST_DEST_ADDR = 2; + +static const uint8_t N230_ETH0_IFACE_ID = 0; +static const uint8_t N230_ETH1_IFACE_ID = 1; + +class n230_ad9361_client_t : public ad9361_params { +public: + ~n230_ad9361_client_t() {} + double get_band_edge(frequency_band_t band) { + switch (band) { + case AD9361_RX_BAND0: return 2.2e9; + case AD9361_RX_BAND1: return 4.0e9; + case AD9361_TX_BAND0: return 2.5e9; + default: return 0; + } + } + clocking_mode_t get_clocking_mode() { + return AD9361_XTAL_N_CLK_PATH; + } + digital_interface_mode_t get_digital_interface_mode() { + return AD9361_DDR_FDD_LVDS; + } + digital_interface_delays_t get_digital_interface_timing() { + digital_interface_delays_t delays; + delays.rx_clk_delay = 0; + delays.rx_data_delay = 0; + delays.tx_clk_delay = 0; + delays.tx_data_delay = 2; + return delays; + } +}; + +n230_resource_manager::n230_resource_manager( + const std::vector<std::string> ip_addrs, + const bool safe_mode +) : + _safe_mode(safe_mode), + _last_host_enpoint(0) +{ + if (_safe_mode) UHD_MSG(warning) << "Initializing device in safe mode\n"; + UHD_MSG(status) << "Setup basic communication...\n"; + + //Discover ethernet interfaces + bool dual_eth_expected = (ip_addrs.size() > 1); + BOOST_FOREACH(const std::string& addr, ip_addrs) { + n230_eth_conn_t conn_iface; + conn_iface.ip_addr = addr; + + boost::uint32_t iface_id = 0xFFFFFFFF; + try { + iface_id = usrp3::usrp3_fw_ctrl_iface::get_iface_id( + conn_iface.ip_addr, BOOST_STRINGIZE(N230_FW_COMMS_UDP_PORT), N230_FW_PRODUCT_ID); + } catch (uhd::io_error&) { + throw uhd::io_error(str(boost::format( + "Could not communicate with the device over address %s") % + conn_iface.ip_addr)); + } + switch (iface_id) { + case N230_ETH0_IFACE_ID: conn_iface.type = ETH0; break; + case N230_ETH1_IFACE_ID: conn_iface.type = ETH1; break; + default: { + if (dual_eth_expected) { + throw uhd::runtime_error("N230 Initialization Error: Could not detect ethernet port number."); + } else { + //For backwards compatibility, if only one port is specified, assume that a detection + //failure means that the device does not support dual-ethernet behavior. + conn_iface.type = ETH0; break; + } + } + } + _eth_conns.push_back(conn_iface); + } + if (_eth_conns.size() < 1) { + throw uhd::runtime_error("N230 Initialization Error: No eth interfaces specified.)"); + } + + //Create firmware communication interface + _fw_ctrl = usrp3::usrp3_fw_ctrl_iface::make( + transport::udp_simple::make_connected( + _get_conn(PRI_ETH).ip_addr, BOOST_STRINGIZE(N230_FW_COMMS_UDP_PORT)), N230_FW_PRODUCT_ID); + if (_fw_ctrl.get() == NULL) { + throw uhd::runtime_error("N230 Initialization Error: Could not create n230_ctrl_iface.)"); + } + _check_fw_compat(); + + //Start the device claimer + _claimer_task = uhd::task::make(boost::bind(&n230_resource_manager::_claimer_loop, this)); + + //Create common settings interface + const sid_t core_sid = _generate_sid(CORE, _get_conn(PRI_ETH).type); + + transport::udp_zero_copy::buff_params dummy_out_params; + transport::zero_copy_if::sptr core_xport = + _create_transport(_get_conn(PRI_ETH), core_sid, device_addr_t(), dummy_out_params); + if (core_xport.get() == NULL) { + throw uhd::runtime_error("N230 Initialization Error: Could not create settings transport.)"); + } + _core_ctrl = radio_ctrl_core_3000::make( + fpga::CVITA_BIG_ENDIAN, core_xport, core_xport, core_sid.get()); + if (_core_ctrl.get() == NULL) { + throw uhd::runtime_error("N230 Initialization Error: Could not create settings ctrl.)"); + } + _check_fpga_compat(); + + UHD_MSG(status) << boost::format("Version signatures... Firmware:%s FPGA:%s...\n") + % _fw_version.get_hash_str() % _fpga_version.get_hash_str(); + + _core_radio_ctrl_reg.initialize(*_core_ctrl, true /*flush*/); + _core_misc_reg.initialize(*_core_ctrl, true /*flush*/); + _core_pps_sel_reg.initialize(*_core_ctrl, true /*flush*/); + _core_status_reg.initialize(*_core_ctrl); + + //Create common SPI interface + _core_spi_ctrl = n230_core_spi_core::make(_core_ctrl); + if (_core_spi_ctrl.get() == NULL) { + throw uhd::runtime_error("N230 Initialization Error: Could not create SPI ctrl.)"); + } + + //Create AD9361 interface + UHD_MSG(status) << "Initializing CODEC...\n"; + _codec_ctrl = ad9361_ctrl::make_spi( + boost::make_shared<n230_ad9361_client_t>(), _core_spi_ctrl, fpga::AD9361_SPI_SLAVE_NUM); + if (_codec_ctrl.get() == NULL) { + throw uhd::runtime_error("N230 Initialization Error: Could not create Catalina ctrl.)"); + } + _codec_ctrl->set_clock_rate(fpga::CODEC_DEFAULT_CLK_RATE); + _codec_mgr = ad936x_manager::make(_codec_ctrl, fpga::NUM_RADIOS); + _codec_mgr->init_codec(); + + //Create AD4001 interface + _ref_pll_ctrl = boost::make_shared<n230_ref_pll_ctrl>(_core_spi_ctrl); + if (_ref_pll_ctrl.get() == NULL) { + throw uhd::runtime_error("N230 Initialization Error: Could not create ADF4001 ctrl.)"); + } + + //Reset SERDES interface and synchronize to frame sync from AD9361 + _reset_codec_digital_interface(); + + std::vector<time_core_3000::sptr> time_cores; + std::vector<gpio_atr::gpio_atr_3000::sptr> gpio_cores; + for (size_t i = 0; i < fpga::NUM_RADIOS; i++) { + _initialize_radio(i); + time_cores.push_back(_radios[i].time); + gpio_cores.push_back(_radios[i].gpio_atr); + } + + //Create clock and PPS control interface + _clk_pps_ctrl = n230_clk_pps_ctrl::make( + _codec_ctrl, _ref_pll_ctrl, _core_misc_reg, _core_pps_sel_reg, _core_status_reg, time_cores); + if (_clk_pps_ctrl.get() == NULL) { + throw uhd::runtime_error("N230 Initialization Error: Could not create clock and PPS ctrl.)"); + } + + //Create front-end control interface + _frontend_ctrl = n230_frontend_ctrl::make(_core_ctrl, _core_misc_reg, _codec_ctrl, gpio_cores); + if (_frontend_ctrl.get() == NULL) { + throw uhd::runtime_error("N230 Initialization Error: Could not create front-end ctrl.)"); + } + + //Create miniSAS GPIO interfaces + _ms0_gpio = gpio_atr::gpio_atr_3000::make( + _core_ctrl, fpga::sr_addr(fpga::SR_CORE_MS0_GPIO), fpga::rb_addr(fpga::RB_CORE_MS0_GPIO)); + _ms0_gpio->set_atr_mode(gpio_atr::MODE_GPIO,gpio_atr::gpio_atr_3000::MASK_SET_ALL); + _ms1_gpio = gpio_atr::gpio_atr_3000::make( + _core_ctrl, fpga::sr_addr(fpga::SR_CORE_MS1_GPIO), fpga::rb_addr(fpga::RB_CORE_MS1_GPIO)); + _ms1_gpio->set_atr_mode(gpio_atr::MODE_GPIO,gpio_atr::gpio_atr_3000::MASK_SET_ALL); + + //Create GPSDO interface + if (_core_status_reg.read(fpga::core_status_reg_t::GPSDO_STATUS) != fpga::GPSDO_ST_ABSENT) { + UHD_MSG(status) << "Detecting GPSDO.... " << std::flush; + try { + const sid_t gps_uart_sid = _generate_sid(GPS_UART, _get_conn(PRI_ETH).type); + transport::zero_copy_if::sptr gps_uart_xport = + _create_transport(_get_conn(PRI_ETH), gps_uart_sid, device_addr_t(), dummy_out_params); + _gps_uart = n230_uart::make(gps_uart_xport, uhd::htonx(gps_uart_sid.get())); + _gps_uart->set_baud_divider(fpga::BUS_CLK_RATE/fpga::GPSDO_UART_BAUDRATE); + _gps_uart->write_uart("\n"); //cause the baud and response to be setup + boost::this_thread::sleep(boost::posix_time::seconds(1)); //allow for a little propagation + _gps_ctrl = gps_ctrl::make(_gps_uart); + } catch(std::exception &e) { + UHD_MSG(error) << "An error occurred making GPSDO control: " << e.what() << std::endl; + } + if (not is_gpsdo_present()) { + _core_ctrl->poke32(fpga::sr_addr(fpga::SR_CORE_GPSDO_ST), fpga::GPSDO_ST_ABSENT); + } + } + + //Perform data self-tests + _frontend_ctrl->set_stream_state(TXRX_STREAMING, TXRX_STREAMING); + for (size_t i = 0; i < fpga::NUM_RADIOS; i++) { + _frontend_ctrl->set_self_test_mode(LOOPBACK_RADIO); + bool radio_selftest_pass = _radio_data_loopback_self_test(_radios[i].ctrl); + if (!radio_selftest_pass) { + throw uhd::runtime_error("N230 Initialization Error: Data loopback test failed.)"); + } + + _frontend_ctrl->set_self_test_mode(LOOPBACK_CODEC); + bool codec_selftest_pass = _radio_data_loopback_self_test(_radios[i].ctrl); + if (!codec_selftest_pass) { + throw uhd::runtime_error("N230 Initialization Error: Codec loopback test failed.)"); + } + } + _frontend_ctrl->set_self_test_mode(LOOPBACK_DISABLED); + _frontend_ctrl->set_stream_state(NONE_STREAMING, NONE_STREAMING); +} + +n230_resource_manager::~n230_resource_manager() +{ + _claimer_task.reset(); + { //Critical section + boost::mutex::scoped_lock(_claimer_mutex); + _fw_ctrl->poke32(N230_FW_HOST_SHMEM_OFFSET(claim_time), 0); + _fw_ctrl->poke32(N230_FW_HOST_SHMEM_OFFSET(claim_src), 0); + } +} + +transport::zero_copy_if::sptr n230_resource_manager::create_transport( + n230_data_dir_t direction, + size_t radio_instance, + const device_addr_t ¶ms, + sid_t& sid_pair, + transport::udp_zero_copy::buff_params& buff_out_params) +{ + const n230_eth_conn_t& conn = _get_conn((radio_instance==1)?SEC_ETH:PRI_ETH); + const sid_t temp_sid_pair = + _generate_sid(direction==RX_DATA?RADIO_RX_DATA:RADIO_TX_DATA, conn.type, radio_instance); + transport::zero_copy_if::sptr xport = _create_transport(conn, temp_sid_pair, params, buff_out_params); + if (xport.get() == NULL) { + throw uhd::runtime_error("N230 Create Data Transport: Could not create data transport.)"); + } else { + sid_pair = temp_sid_pair; + } + return xport; +} + +bool n230_resource_manager::is_device_claimed(uhd::usrp::usrp3::usrp3_fw_ctrl_iface::sptr fw_ctrl) +{ + boost::mutex::scoped_lock(_claimer_mutex); + + //If timed out then device is definitely unclaimed + if (fw_ctrl->peek32(N230_FW_HOST_SHMEM_OFFSET(claim_status)) == 0) + return false; + + //otherwise check claim src to determine if another thread with the same src has claimed the device + return fw_ctrl->peek32(N230_FW_HOST_SHMEM_OFFSET(claim_src)) != get_process_hash(); +} + +void n230_resource_manager::_claimer_loop() +{ + { //Critical section + boost::mutex::scoped_lock(_claimer_mutex); + _fw_ctrl->poke32(N230_FW_HOST_SHMEM_OFFSET(claim_time), time(NULL)); + _fw_ctrl->poke32(N230_FW_HOST_SHMEM_OFFSET(claim_src), get_process_hash()); + } + boost::this_thread::sleep(boost::posix_time::milliseconds(N230_CLAIMER_TIMEOUT_IN_MS / 2)); +} + +void n230_resource_manager::_initialize_radio(size_t instance) +{ + radio_resource_t& radio = _radios[instance]; + + //Create common settings interface + const sid_t ctrl_sid = _generate_sid(RADIO_CONTROL, _get_conn(PRI_ETH).type, instance); + transport::udp_zero_copy::buff_params buff_out_params; + transport::zero_copy_if::sptr ctrl_xport = + _create_transport(_get_conn(PRI_ETH), ctrl_sid, device_addr_t(), buff_out_params); + if (ctrl_xport.get() == NULL) { + throw uhd::runtime_error("N230 Initialization Error: Could not create radio transport.)"); + } + radio.ctrl = radio_ctrl_core_3000::make( + fpga::CVITA_BIG_ENDIAN, ctrl_xport, ctrl_xport, ctrl_sid.get()); + if (radio.ctrl.get() == NULL) { + throw uhd::runtime_error("N230 Initialization Error: Could not create radio ctrl.)"); + } + + //Perform register loopback test to verify the radio clock + bool reg_selftest_pass = _radio_register_loopback_self_test(radio.ctrl); + if (!reg_selftest_pass) { + throw uhd::runtime_error("N230 Initialization Error: Register loopback test failed.)"); + } + + //Write-only ATR interface + radio.gpio_atr = gpio_atr::gpio_atr_3000::make_write_only(radio.ctrl, fpga::sr_addr(fpga::SR_RADIO_ATR)); + radio.gpio_atr->set_atr_mode(gpio_atr::MODE_ATR,gpio_atr::gpio_atr_3000::MASK_SET_ALL); + + //Core VITA time interface + time_core_3000::readback_bases_type time_bases; + time_bases.rb_now = fpga::rb_addr(fpga::RB_RADIO_TIME_NOW); + time_bases.rb_pps = fpga::rb_addr(fpga::RB_RADIO_TIME_PPS); + radio.time = time_core_3000::make(radio.ctrl, fpga::sr_addr(fpga::SR_RADIO_TIME), time_bases); + if (radio.time.get() == NULL) { + throw uhd::runtime_error("N230 Initialization Error: Could not create time core.)"); + } + + //RX DSP + radio.framer = rx_vita_core_3000::make( + radio.ctrl, fpga::sr_addr(fpga::SR_RADIO_RX_CTRL)); + radio.ddc = rx_dsp_core_3000::make(radio.ctrl, fpga::sr_addr(fpga::SR_RADIO_RX_DSP), true /*old DDC?*/); + if (radio.framer.get() == NULL || radio.ddc.get() == NULL) { + throw uhd::runtime_error("N230 Initialization Error: Could not create RX DSP interface.)"); + } + radio.ddc->set_link_rate(fpga::N230_LINK_RATE_BPS); + + //TX DSP + radio.deframer = tx_vita_core_3000::make(radio.ctrl, fpga::sr_addr(fpga::SR_RADIO_TX_CTRL)); + radio.duc = tx_dsp_core_3000::make(radio.ctrl, fpga::sr_addr(fpga::SR_RADIO_TX_DSP)); + if (radio.deframer.get() == NULL || radio.duc.get() == NULL) { + throw uhd::runtime_error("N230 Initialization Error: Could not create RX DSP interface.)"); + } + radio.duc->set_link_rate(fpga::N230_LINK_RATE_BPS); + + //User settings + radio.user_settings = user_settings_core_3000::make(radio.ctrl, + fpga::sr_addr(fpga::SR_RADIO_USER_SR), fpga::rb_addr(fpga::SR_RADIO_USER_RB)); + if (radio.user_settings.get() == NULL) { + throw uhd::runtime_error("N230 Initialization Error: Could not create user settings bus.)"); + } +} + +boost::uint8_t xb_ep_to_sid(fpga::xb_endpoint_t ep) { + return static_cast<boost::uint8_t>(ep) << 4; +} + +const sid_t n230_resource_manager::_generate_sid(const n230_endpoint_t type, const n230_eth_port_t xport, size_t instance) +{ + fpga::xb_endpoint_t xb_dest_ep; + boost::uint8_t sid_dest_ep = 0; + fpga::xb_endpoint_t xb_ret_ep = (xport == ETH1) ? fpga::N230_XB_DST_E1 : fpga::N230_XB_DST_E0; + boost::uint8_t sid_ret_addr = (xport == ETH1) ? N230_HOST_SRC_ADDR_ETH1 : N230_HOST_SRC_ADDR_ETH0; + + if (type == CORE or type == GPS_UART) { + //Non-radio endpoints + xb_dest_ep = (type == CORE) ? fpga::N230_XB_DST_GCTRL : fpga::N230_XB_DST_UART; + sid_dest_ep = xb_ep_to_sid(xb_dest_ep); + } else { + //Radio endpoints + xb_dest_ep = (instance == 1) ? fpga::N230_XB_DST_R1 : fpga::N230_XB_DST_R0; + sid_dest_ep = xb_ep_to_sid(xb_dest_ep); + switch (type) { + case RADIO_TX_DATA: + sid_dest_ep |= fpga::RADIO_DATA_SUFFIX; + break; + case RADIO_RX_DATA: + sid_dest_ep |= fpga::RADIO_FC_SUFFIX; + break; + default: + sid_dest_ep |= fpga::RADIO_CTRL_SUFFIX; + break; + } + } + + //Increment last host logical endpoint + sid_t sid(sid_ret_addr, ++_last_host_enpoint, N230_HOST_DEST_ADDR, sid_dest_ep); + + //Program the crossbar addr + _fw_ctrl->poke32(fw::reg_addr(fw::WB_SBRB_BASE, fw::SR_ZPU_XB_LOCAL), sid.get_dst_addr()); + // Program CAM entry for returning packets to us + // This type of packet does not match the XB_LOCAL address and is looked up in the lower half of the CAM + _fw_ctrl->poke32(fw::reg_addr(fw::WB_XB_SBRB_BASE, sid.get_src_addr()), static_cast<boost::uint32_t>(xb_ret_ep)); + // Program CAM entry for outgoing packets matching a N230 resource (for example a Radio) + // This type of packet does matches the XB_LOCAL address and is looked up in the upper half of the CAM + _fw_ctrl->poke32(fw::reg_addr(fw::WB_XB_SBRB_BASE, 256 + sid.get_dst_endpoint()), static_cast<boost::uint32_t>(xb_dest_ep)); + + return sid; +} + +transport::zero_copy_if::sptr n230_resource_manager::_create_transport( + const n230_eth_conn_t& eth_conn, + const sid_t& sid, const device_addr_t &buff_params, + transport::udp_zero_copy::buff_params& buff_params_out) +{ + transport::zero_copy_xport_params default_buff_args; + default_buff_args.recv_frame_size = transport::udp_simple::mtu; + default_buff_args.send_frame_size = transport::udp_simple::mtu; + default_buff_args.num_recv_frames = 32; + default_buff_args.num_send_frames = 32; + + transport::zero_copy_if::sptr xport = transport::udp_zero_copy::make( + eth_conn.ip_addr, boost::lexical_cast<std::string>(fpga::CVITA_UDP_PORT), + default_buff_args, buff_params_out, buff_params); + + if (xport.get()) { + _program_dispatcher(*xport, eth_conn.type, sid); + } + return xport; +} + +void n230_resource_manager::_program_dispatcher( + transport::zero_copy_if& xport, const n230_eth_port_t port, const sid_t& sid) +{ + //Send a mini packet with SID into the ZPU + //ZPU will reprogram the ethernet framer + transport::managed_send_buffer::sptr buff = xport.get_send_buff(); + buff->cast<boost::uint32_t *>()[0] = 0; //eth dispatch looks for != 0 + buff->cast<boost::uint32_t *>()[1] = uhd::htonx(sid.get()); + buff->commit(8); + buff.reset(); + + //reprogram the ethernet dispatcher's udp port (should be safe to always set) + uint32_t disp_base_offset = + ((port == ETH1) ? fw::SR_ZPU_ETHINT1 : fw::SR_ZPU_ETHINT0) + fw::SR_ZPU_ETHINT_DISPATCHER_BASE; + _fw_ctrl->poke32(fw::reg_addr(fw::WB_SBRB_BASE, disp_base_offset + fw::ETH_FRAMER_SRC_UDP_PORT), fpga::CVITA_UDP_PORT); + + //Do a peek to an arbitrary address to guarantee that the + //ethernet framer has been programmed before we return. + _fw_ctrl->peek32(0); +} + +void n230_resource_manager::_reset_codec_digital_interface() +{ + //Set timing registers + _core_ctrl->poke32(fpga::sr_addr(fpga::SR_CORE_DATA_DELAY), fpga::CODEC_DATA_DELAY); + _core_ctrl->poke32(fpga::sr_addr(fpga::SR_CORE_CLK_DELAY), fpga::CODEC_CLK_DELAY); + + _core_radio_ctrl_reg.write(fpga::core_radio_ctrl_reg_t::CODEC_ARST, 1); + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); + _core_radio_ctrl_reg.write(fpga::core_radio_ctrl_reg_t::CODEC_ARST, 0); +} + +bool n230_resource_manager::_radio_register_loopback_self_test(wb_iface::sptr iface) +{ + bool test_fail = false; + size_t hash = static_cast<size_t>(time(NULL)); + for (size_t i = 0; i < 100; i++) { + boost::hash_combine(hash, i); + iface->poke32(fpga::sr_addr(fpga::SR_RADIO_TEST), boost::uint32_t(hash)); + test_fail = iface->peek32(fpga::rb_addr(fpga::RB_RADIO_TEST)) != boost::uint32_t(hash); + if (test_fail) break; //exit loop on any failure + } + return !test_fail; +} + +bool n230_resource_manager::_radio_data_loopback_self_test(wb_iface::sptr iface) +{ + bool test_fail = false; + size_t hash = size_t(time(NULL)); + for (size_t i = 0; i < 100; i++) { + boost::hash_combine(hash, i); + const boost::uint32_t word32 = boost::uint32_t(hash) & (IF_DATA_I_MASK | IF_DATA_Q_MASK); + iface->poke32(fpga::sr_addr(fpga::SR_RADIO_CODEC_IDLE), word32); + iface->peek64(fpga::rb_addr(fpga::RB_RADIO_CODEC_DATA)); //block until request completes + boost::this_thread::sleep(boost::posix_time::microseconds(100)); //wait for loopback to propagate through codec + const boost::uint64_t rb_word64 = iface->peek64(fpga::rb_addr(fpga::RB_RADIO_CODEC_DATA)); + const boost::uint32_t rb_tx = boost::uint32_t(rb_word64 >> 32); + const boost::uint32_t rb_rx = boost::uint32_t(rb_word64 & 0xffffffff); + test_fail = word32 != rb_tx or word32 != rb_rx; + if (test_fail) + UHD_MSG(fastpath) << boost::format("mismatch (exp:%x, got:%x and %x)... ") % word32 % rb_tx % rb_rx; + break; //exit loop on any failure + } + + /* Zero out the idle data. */ + iface->poke32(fpga::sr_addr(fpga::SR_RADIO_CODEC_IDLE), 0); + return !test_fail; +} + +std::string n230_resource_manager::_get_fpga_upgrade_msg() { + std::string img_loader_path = + (fs::path(uhd::get_pkg_path()) / "bin" / "uhd_image_loader").string(); + + return str(boost::format( + "\nDownload the appropriate FPGA images for this version of UHD.\n" + "%s\n\n" + "Then burn a new image to the on-board flash storage of your\n" + "USRP N230 device using the image loader utility. Use this command:\n" + "\n \"%s\" --args=\"type=n230,addr=%s\"\n") + % print_utility_error("uhd_images_downloader.py") + % img_loader_path % _get_conn(PRI_ETH).ip_addr); + +} + +void n230_resource_manager::_check_fw_compat() +{ + boost::uint32_t compat_num = _fw_ctrl->peek32(N230_FW_HOST_SHMEM_OFFSET(fw_compat_num)); + _fw_version.compat_major = compat_num >> 16; + _fw_version.compat_minor = compat_num; + _fw_version.version_hash = _fw_ctrl->peek32(N230_FW_HOST_SHMEM_OFFSET(fw_version_hash)); + + if (_fw_version.compat_major != N230_FW_COMPAT_NUM_MAJOR){ + throw uhd::runtime_error(str(boost::format( + "Expected firmware compatibility number %d.x, but got %d.%d\n" + "The firmware build is not compatible with the host code build.\n" + "%s" + ) % static_cast<boost::uint32_t>(N230_FW_COMPAT_NUM_MAJOR) + % static_cast<boost::uint32_t>(_fw_version.compat_major) + % static_cast<boost::uint32_t>(_fw_version.compat_minor) + % _get_fpga_upgrade_msg())); + } +} + +void n230_resource_manager::_check_fpga_compat() +{ + const boost::uint64_t compat = _core_ctrl->peek64(fpga::rb_addr(fpga::RB_CORE_SIGNATUE)); + const boost::uint32_t signature = boost::uint32_t(compat >> 32); + const boost::uint16_t product_id = boost::uint8_t(compat >> 24); + _fpga_version.compat_major = static_cast<boost::uint8_t>(compat >> 16); + _fpga_version.compat_minor = static_cast<boost::uint16_t>(compat); + + const boost::uint64_t version_hash = _core_ctrl->peek64(fpga::rb_addr(fpga::RB_CORE_VERSION_HASH)); + _fpga_version.version_hash = boost::uint32_t(version_hash); + + if (signature != 0x0ACE0BA5E || product_id != fpga::RB_N230_PRODUCT_ID) + throw uhd::runtime_error("Signature check failed. Please contact support."); + + bool is_safe_image = (_fpga_version.compat_major > fpga::RB_N230_COMPAT_SAFE); + + if (is_safe_image && !_safe_mode) { + throw uhd::runtime_error( + "The device appears to have the failsafe FPGA image loaded\n" + "This could have happened because the production FPGA image in the flash was either corrupt or non-existent\n" + "To remedy this error, please burn a valid FPGA image to the flash.\n" + "To continue using the failsafe image with UHD, create the UHD device with the \"safe_mode\" device arg.\n" + "Radio functionality/performance not guaranteed when operating in safe mode.\n"); + } else if (_fpga_version.compat_major != fpga::RB_N230_COMPAT_MAJOR && !is_safe_image) { + throw uhd::runtime_error(str(boost::format( + "Expected FPGA compatibility number %d.x, but got %d.%d:\n" + "The FPGA build is not compatible with the host code build.\n" + "%s" + ) % static_cast<boost::uint32_t>(fpga::RB_N230_COMPAT_MAJOR) + % static_cast<boost::uint32_t>(_fpga_version.compat_major) + % static_cast<boost::uint32_t>(_fpga_version.compat_minor) + % _get_fpga_upgrade_msg())); + } +} + +}}} //namespace diff --git a/host/lib/usrp/n230/n230_resource_manager.hpp b/host/lib/usrp/n230/n230_resource_manager.hpp new file mode 100644 index 000000000..0a1178bd2 --- /dev/null +++ b/host/lib/usrp/n230/n230_resource_manager.hpp @@ -0,0 +1,318 @@ +// +// Copyright 2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_N230_RESOURCE_MANAGER_HPP +#define INCLUDED_N230_RESOURCE_MANAGER_HPP + +#include "radio_ctrl_core_3000.hpp" +#include "spi_core_3000.hpp" +#include "gpio_atr_3000.hpp" +#include "rx_vita_core_3000.hpp" +#include "tx_vita_core_3000.hpp" +#include "time_core_3000.hpp" +#include "rx_dsp_core_3000.hpp" +#include "tx_dsp_core_3000.hpp" +#include "user_settings_core_3000.hpp" +#include "ad9361_ctrl.hpp" +#include "ad936x_manager.hpp" +#include <uhd/utils/tasks.hpp> +#include <uhd/types/sid.hpp> +#include <uhd/types/device_addr.hpp> +#include <uhd/utils/soft_register.hpp> +#include <uhd/transport/udp_zero_copy.hpp> +#include <uhd/transport/bounded_buffer.hpp> +#include <uhd/usrp/gps_ctrl.hpp> + +#include "usrp3_fw_ctrl_iface.hpp" +#include "n230_clk_pps_ctrl.hpp" +#include "n230_cores.hpp" +#include "n230_fpga_defs.h" +#include "n230_frontend_ctrl.hpp" +#include "n230_uart.hpp" + +namespace uhd { namespace usrp { namespace n230 { + +enum n230_eth_port_t { + ETH0, + ETH1 +}; + +enum n230_eth_pref_t { + PRI_ETH, + SEC_ETH +}; + +enum n230_endpoint_t { + RADIO_TX_DATA, + RADIO_RX_DATA, + RADIO_CONTROL, + CORE, + GPS_UART +}; + +enum n230_ver_src_t { + SOFTWARE, + FIRMWARE, + FPGA +}; + +enum n230_version_t { + COMPAT_MAJOR, + COMPAT_MINOR +}; + +enum n230_data_dir_t { + RX_DATA, TX_DATA +}; + +//Radio resources +class radio_resource_t : public boost::noncopyable { +public: + radio_ctrl_core_3000::sptr ctrl; + gpio_atr::gpio_atr_3000::sptr gpio_atr; + time_core_3000::sptr time; + rx_vita_core_3000::sptr framer; + rx_dsp_core_3000::sptr ddc; + tx_vita_core_3000::sptr deframer; + tx_dsp_core_3000::sptr duc; + user_settings_core_3000::sptr user_settings; +}; + +class n230_resource_manager : public boost::noncopyable +{ +public: //Methods + n230_resource_manager(const std::vector<std::string> ip_addrs, const bool safe_mode); + virtual ~n230_resource_manager(); + + static bool is_device_claimed(uhd::usrp::usrp3::usrp3_fw_ctrl_iface::sptr fw_ctrl); + + inline bool is_device_claimed() { + if (_fw_ctrl.get()) { + return is_device_claimed(_fw_ctrl); + } else { + return false; + } + } + + inline boost::uint32_t get_version(n230_ver_src_t src, n230_version_t type) { + switch (src) { + case FPGA: return _fpga_version.get(type); + case FIRMWARE: return _fw_version.get(type); + default: return 0; + } + } + + inline const std::string get_version_hash(n230_ver_src_t src) { + switch (src) { + case FPGA: return _fpga_version.get_hash_str(); + case FIRMWARE: return _fw_version.get_hash_str(); + default: return ""; + } + } + + //Firmware control interface + inline wb_iface& get_fw_ctrl() const { + return *_fw_ctrl; + } + inline wb_iface::sptr get_fw_ctrl_sptr() { + return _fw_ctrl; + } + + //Core settings control interface + inline radio_ctrl_core_3000& get_core_ctrl() const { + return *_core_ctrl; + } + inline radio_ctrl_core_3000::sptr get_core_ctrl_sptr() { + return _core_ctrl; + } + + //AD931 control interface + inline ad9361_ctrl& get_codec_ctrl() const { + return *_codec_ctrl; + } + inline ad9361_ctrl::sptr get_codec_ctrl_sptr() { + return _codec_ctrl; + } + inline uhd::usrp::ad936x_manager& get_codec_mgr() const { + return *_codec_mgr; + } + + //Clock PPS controls + inline n230_ref_pll_ctrl& get_ref_pll_ctrl() const { + return *_ref_pll_ctrl; + } + inline n230_ref_pll_ctrl::sptr get_ref_pll_ctrl_sptr() { + return _ref_pll_ctrl; + } + + //Clock PPS controls + inline n230_clk_pps_ctrl& get_clk_pps_ctrl() const { + return *_clk_pps_ctrl; + } + inline n230_clk_pps_ctrl::sptr get_clk_pps_ctrl_sptr() { + return _clk_pps_ctrl; + } + + //Front-end control + inline n230_frontend_ctrl& get_frontend_ctrl() const { + return *_frontend_ctrl; + } + inline n230_frontend_ctrl::sptr get_frontend_ctrl_sptr() { + return _frontend_ctrl; + } + + //MiniSAS GPIO control + inline gpio_atr::gpio_atr_3000::sptr get_minisas_gpio_ctrl_sptr(size_t idx) { + return idx == 0 ? _ms0_gpio : _ms1_gpio; + } + + inline gpio_atr::gpio_atr_3000& get_minisas_gpio_ctrl(size_t idx) { + return *get_minisas_gpio_ctrl_sptr(idx); + } + + //GPSDO control + inline bool is_gpsdo_present() { + return _gps_ctrl.get() and _gps_ctrl->gps_detected(); + } + + inline uhd::gps_ctrl::sptr get_gps_ctrl(void) { + return _gps_ctrl; + } + + inline radio_resource_t& get_radio(size_t instance) { + return _radios[instance]; + } + + //Transport to stream data + transport::zero_copy_if::sptr create_transport( + n230_data_dir_t direction, size_t radio_instance, + const device_addr_t ¶ms, sid_t& sid, + transport::udp_zero_copy::buff_params& buff_out_params); + + //Misc + inline double get_max_link_rate() { + return fpga::N230_LINK_RATE_BPS * _eth_conns.size(); + } + +private: + struct ver_info_t { + boost::uint8_t compat_major; + boost::uint16_t compat_minor; + boost::uint32_t version_hash; + + boost::uint32_t get(n230_version_t type) { + switch (type) { + case COMPAT_MAJOR: return compat_major; + case COMPAT_MINOR: return compat_minor; + default: return 0; + } + } + + const std::string get_hash_str() { + return (str(boost::format("%07x%s") + % (version_hash & 0x0FFFFFFF) + % ((version_hash & 0xF0000000) ? "(modified)" : ""))); + } + }; + + struct n230_eth_conn_t { + std::string ip_addr; + n230_eth_port_t type; + }; + + //-- Functions -- + + void _claimer_loop(); + + void _initialize_radio(size_t instance); + + std::string _get_fpga_upgrade_msg(); + void _check_fw_compat(); + void _check_fpga_compat(); + + const sid_t _generate_sid( + const n230_endpoint_t type, const n230_eth_port_t xport, size_t instance = 0); + + transport::zero_copy_if::sptr _create_transport( + const n230_eth_conn_t& eth_conn, + const sid_t& sid, const device_addr_t &buff_params, + transport::udp_zero_copy::buff_params& buff_params_out); + + void _program_dispatcher( + transport::zero_copy_if& xport, const n230_eth_port_t port, const sid_t& sid); + + void _reset_codec_digital_interface(); + + bool _radio_register_loopback_self_test(wb_iface::sptr iface); + + bool _radio_data_loopback_self_test(wb_iface::sptr iface); + + inline const n230_eth_conn_t& _get_conn(const n230_eth_pref_t pref) { + if (_eth_conns.size() == 1) + return _eth_conns[0]; + else + return _eth_conns[(pref==PRI_ETH)?0:1]; + } + + //-- Members -- + + std::vector<n230_eth_conn_t> _eth_conns; + const bool _safe_mode; + ver_info_t _fw_version; + ver_info_t _fpga_version; + + //Firmware register interface + uhd::usrp::usrp3::usrp3_fw_ctrl_iface::sptr _fw_ctrl; + uhd::task::sptr _claimer_task; + static boost::mutex _claimer_mutex; //All claims and checks in this process are serialized + + //Transport + boost::uint8_t _last_host_enpoint; + + //Radio settings interface + radio_ctrl_core_3000::sptr _core_ctrl; + n230_core_spi_core::sptr _core_spi_ctrl; + ad9361_ctrl::sptr _codec_ctrl; + uhd::usrp::ad936x_manager::sptr _codec_mgr; + + //Core Registers + fpga::core_radio_ctrl_reg_t _core_radio_ctrl_reg; + fpga::core_misc_reg_t _core_misc_reg; + fpga::core_pps_sel_reg_t _core_pps_sel_reg; + fpga::core_status_reg_t _core_status_reg; + + //Radio peripherals + radio_resource_t _radios[fpga::NUM_RADIOS]; + + //Misc IO peripherals + n230_ref_pll_ctrl::sptr _ref_pll_ctrl; + n230_clk_pps_ctrl::sptr _clk_pps_ctrl; + n230_frontend_ctrl::sptr _frontend_ctrl; + + //miniSAS GPIO + gpio_atr::gpio_atr_3000::sptr _ms0_gpio; + gpio_atr::gpio_atr_3000::sptr _ms1_gpio; + + //GPSDO + n230_uart::sptr _gps_uart; + uhd::gps_ctrl::sptr _gps_ctrl; + +}; + +}}} //namespace + +#endif //INCLUDED_N230_RESOURCE_MANAGER_HPP diff --git a/host/lib/usrp/n230/n230_stream_manager.cpp b/host/lib/usrp/n230/n230_stream_manager.cpp new file mode 100644 index 000000000..e7624ecd6 --- /dev/null +++ b/host/lib/usrp/n230/n230_stream_manager.cpp @@ -0,0 +1,562 @@ +// +// Copyright 2013 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "n230_stream_manager.hpp" + +#include "../../transport/super_recv_packet_handler.hpp" +#include "../../transport/super_send_packet_handler.hpp" +#include "async_packet_handler.hpp" +#include <uhd/transport/bounded_buffer.hpp> +#include <boost/bind.hpp> +#include <uhd/utils/tasks.hpp> +#include <uhd/utils/log.hpp> +#include <boost/foreach.hpp> +#include <boost/make_shared.hpp> + +static const double N230_RX_SW_BUFF_FULL_FACTOR = 0.90; //Buffer should ideally be 90% full. +static const size_t N230_RX_FC_REQUEST_FREQ = 32; //per flow-control window +static const size_t N230_TX_MAX_ASYNC_MESSAGES = 1000; +static const size_t N230_TX_MAX_SPP = 4092; +static const size_t N230_TX_FC_RESPONSE_FREQ = 10; //per flow-control window + +static const boost::uint32_t N230_EVENT_CODE_FLOW_CTRL = 0; + +namespace uhd { namespace usrp { namespace n230 { + +using namespace uhd::transport; + +n230_stream_manager::~n230_stream_manager() +{ +} + +/*********************************************************************** + * Receive streamer + **********************************************************************/ +n230_stream_manager::n230_stream_manager( + const n230_device_args_t& dev_args, + boost::shared_ptr<n230_resource_manager> resource_mgr, + boost::weak_ptr<property_tree> prop_tree +) : + _dev_args(dev_args), + _resource_mgr(resource_mgr), + _tree(prop_tree) +{ + _async_md_queue.reset(new async_md_queue_t(N230_TX_MAX_ASYNC_MESSAGES)); +} + +/*********************************************************************** + * Receive streamer + **********************************************************************/ +rx_streamer::sptr n230_stream_manager::get_rx_stream(const uhd::stream_args_t &args_) +{ + boost::mutex::scoped_lock lock(_stream_setup_mutex); + + stream_args_t args = args_; + + //setup defaults for unspecified values + if (args.otw_format.empty()) args.otw_format = "sc16"; + args.channels = args.channels.empty()? std::vector<size_t>(1, 0) : args.channels; + + boost::shared_ptr<sph::recv_packet_streamer> my_streamer; + for (size_t stream_i = 0; stream_i < args.channels.size(); stream_i++) + { + const size_t chan = args.channels[stream_i]; + radio_resource_t& perif = _resource_mgr->get_radio(chan); + + //setup transport hints (default to a large recv buff) + //TODO: Propagate the device_args class into streamer in the future + device_addr_t device_addr = args.args; + if (not device_addr.has_key("recv_buff_size")) { + device_addr["recv_buff_size"] = boost::lexical_cast<std::string>(_dev_args.get_recv_buff_size()); + } + if (not device_addr.has_key("recv_frame_size")) { + device_addr["recv_frame_size"] = boost::lexical_cast<std::string>(_dev_args.get_recv_frame_size()); + } + if (not device_addr.has_key("num_recv_frames")) { + device_addr["num_recv_frames"] = boost::lexical_cast<std::string>(_dev_args.get_num_recv_frames()); + } + + transport::udp_zero_copy::buff_params buff_params_out; + sid_t sid; + zero_copy_if::sptr xport = _resource_mgr->create_transport( + RX_DATA, chan, device_addr, sid, buff_params_out); + + //calculate packet size + static const size_t hdr_size = 0 + + vrt::max_if_hdr_words32*sizeof(boost::uint32_t) + //+ sizeof(vrt::if_packet_info_t().tlr) //no longer using trailer + - sizeof(vrt::if_packet_info_t().cid) //no class id ever used + - sizeof(vrt::if_packet_info_t().tsi) //no int time ever used + ; + const size_t bpp = xport->get_recv_frame_size() - hdr_size; + const size_t bpi = convert::get_bytes_per_item(args.otw_format); + size_t spp = unsigned(args.args.cast<double>("spp", bpp/bpi)); + spp = std::min<size_t>(N230_TX_MAX_SPP, spp); //FPGA FIFO maximum for framing at full rate + + //make the new streamer given the samples per packet + if (not my_streamer) my_streamer = boost::make_shared<sph::recv_packet_streamer>(spp); + my_streamer->resize(args.channels.size()); + + //init some streamer stuff + my_streamer->set_vrt_unpacker(&n230_stream_manager::_cvita_hdr_unpack); + + //set the converter + uhd::convert::id_type id; + id.input_format = args.otw_format + "_item32_be"; + id.num_inputs = 1; + id.output_format = args.cpu_format; + id.num_outputs = 1; + my_streamer->set_converter(id); + + perif.framer->clear(); + perif.framer->set_nsamps_per_packet(spp); + perif.framer->set_sid(sid.reversed().get()); + perif.framer->setup(args); + perif.ddc->setup(args); + + //Give the streamer a functor to get the recv_buffer + //bind requires a zero_copy_if::sptr to add a streamer->xport lifetime dependency + my_streamer->set_xport_chan_get_buff( + stream_i, + boost::bind(&zero_copy_if::get_recv_buff, xport, _1), + true /*flush*/ + ); + + my_streamer->set_overflow_handler(stream_i, boost::bind( + &n230_stream_manager::_handle_overflow, this, chan + )); + + my_streamer->set_issue_stream_cmd(stream_i, boost::bind( + &rx_vita_core_3000::issue_stream_command, perif.framer, _1 + )); + + const size_t fc_window = _get_rx_flow_control_window( + xport->get_recv_frame_size(), buff_params_out.recv_buff_size); + const size_t fc_handle_window = std::max<size_t>(1, fc_window / N230_RX_FC_REQUEST_FREQ); + + perif.framer->configure_flow_control(fc_window); + + //Give the streamer a functor to send flow control messages + //handle_rx_flowctrl is static and has no lifetime issues + boost::shared_ptr<rx_fc_cache_t> fc_cache(new rx_fc_cache_t()); + my_streamer->set_xport_handle_flowctrl( + stream_i, boost::bind(&n230_stream_manager::_handle_rx_flowctrl, sid.get(), xport, fc_cache, _1), + fc_handle_window, + true/*init*/ + ); + + //Store a weak pointer to prevent a streamer->manager->streamer circular dependency + _rx_streamers[chan] = my_streamer; //store weak pointer + _rx_stream_cached_args[chan] = args; + + //Sets tick and samp rates on all streamer + update_tick_rate(_get_tick_rate()); + + //TODO: Find a way to remove this dependency + property_tree::sptr prop_tree = _tree.lock(); + if (prop_tree) { + //TODO: Update this to support multiple motherboards + const fs_path mb_path = "/mboards/0"; + prop_tree->access<double>(mb_path / "rx_dsps" / boost::lexical_cast<std::string>(chan) / "rate" / "value").update(); + } + } + update_stream_states(); + + return my_streamer; +} + +/*********************************************************************** + * Transmit streamer + **********************************************************************/ +tx_streamer::sptr n230_stream_manager::get_tx_stream(const uhd::stream_args_t &args_) +{ + boost::mutex::scoped_lock lock(_stream_setup_mutex); + + uhd::stream_args_t args = args_; + + //setup defaults for unspecified values + if (not args.otw_format.empty() and args.otw_format != "sc16") { + throw uhd::value_error("n230_impl::get_tx_stream only supports otw_format sc16"); + } + args.otw_format = "sc16"; + args.channels = args.channels.empty()? std::vector<size_t>(1, 0) : args.channels; + + //shared async queue for all channels in streamer + boost::shared_ptr<async_md_queue_t> async_md(new async_md_queue_t(N230_TX_MAX_ASYNC_MESSAGES)); + + boost::shared_ptr<sph::send_packet_streamer> my_streamer; + for (size_t stream_i = 0; stream_i < args.channels.size(); stream_i++) + { + const size_t chan = args.channels[stream_i]; + radio_resource_t& perif = _resource_mgr->get_radio(chan); + + //setup transport hints (default to a large recv buff) + //TODO: Propagate the device_args class into streamer in the future + device_addr_t device_addr = args.args; + if (not device_addr.has_key("send_buff_size")) { + device_addr["send_buff_size"] = boost::lexical_cast<std::string>(_dev_args.get_send_buff_size()); + } + if (not device_addr.has_key("send_frame_size")) { + device_addr["send_frame_size"] = boost::lexical_cast<std::string>(_dev_args.get_send_frame_size()); + } + if (not device_addr.has_key("num_send_frames")) { + device_addr["num_send_frames"] = boost::lexical_cast<std::string>(_dev_args.get_num_send_frames()); + } + + transport::udp_zero_copy::buff_params buff_params_out; + sid_t sid; + zero_copy_if::sptr xport = _resource_mgr->create_transport( + TX_DATA, chan, device_addr, sid, buff_params_out); + + //calculate packet size + static const size_t hdr_size = 0 + + vrt::num_vrl_words32*sizeof(boost::uint32_t) + + vrt::max_if_hdr_words32*sizeof(boost::uint32_t) + //+ sizeof(vrt::if_packet_info_t().tlr) //forced to have trailer + - sizeof(vrt::if_packet_info_t().cid) //no class id ever used + - sizeof(vrt::if_packet_info_t().tsi) //no int time ever used + ; + const size_t bpp = xport->get_send_frame_size() - hdr_size; + const size_t bpi = convert::get_bytes_per_item(args.otw_format); + const size_t spp = unsigned(args.args.cast<double>("spp", bpp/bpi)); + + //make the new streamer given the samples per packet + if (not my_streamer) my_streamer = boost::make_shared<sph::send_packet_streamer>(spp); + my_streamer->resize(args.channels.size()); + my_streamer->set_vrt_packer(&n230_stream_manager::_cvita_hdr_pack); + + //set the converter + uhd::convert::id_type id; + id.input_format = args.cpu_format; + id.num_inputs = 1; + id.output_format = args.otw_format + "_item32_be"; + id.num_outputs = 1; + my_streamer->set_converter(id); + + perif.deframer->clear(); + perif.deframer->setup(args); + perif.duc->setup(args); + + //flow control setup + size_t fc_window = _get_tx_flow_control_window( + bpp, device_addr.cast<size_t>("send_buff_size", _dev_args.get_send_buff_size())); + //In packets + const size_t fc_handle_window = (fc_window / N230_TX_FC_RESPONSE_FREQ); + + perif.deframer->configure_flow_control(0/*cycs off*/, fc_handle_window); + boost::shared_ptr<tx_fc_cache_t> fc_cache(new tx_fc_cache_t()); + fc_cache->stream_channel = stream_i; + fc_cache->device_channel = chan; + fc_cache->async_queue = async_md; + fc_cache->old_async_queue = _async_md_queue; + + tick_rate_retriever_t get_tick_rate_fn = boost::bind(&n230_stream_manager::_get_tick_rate, this); + task::sptr task = task::make( + boost::bind(&n230_stream_manager::_handle_tx_async_msgs, + fc_cache, xport, get_tick_rate_fn)); + + //Give the streamer a functor to get the send buffer + //get_tx_buff_with_flowctrl is static so bind has no lifetime issues + //xport.send (sptr) is required to add streamer->data-transport lifetime dependency + //task (sptr) is required to add a streamer->async-handler lifetime dependency + my_streamer->set_xport_chan_get_buff( + stream_i, + boost::bind(&n230_stream_manager::_get_tx_buff_with_flowctrl, task, fc_cache, xport, fc_window, _1) + ); + //Give the streamer a functor handled received async messages + my_streamer->set_async_receiver( + boost::bind(&async_md_queue_t::pop_with_timed_wait, async_md, _1, _2) + ); + my_streamer->set_xport_chan_sid(stream_i, true, sid.get()); + my_streamer->set_enable_trailer(false); //TODO not implemented trailer support yet + + //Store a weak pointer to prevent a streamer->manager->streamer circular dependency + _tx_streamers[chan] = boost::weak_ptr<sph::send_packet_streamer>(my_streamer); + _tx_stream_cached_args[chan] = args; + + //Sets tick and samp rates on all streamer + update_tick_rate(_get_tick_rate()); + + //TODO: Find a way to remove this dependency + property_tree::sptr prop_tree = _tree.lock(); + if (prop_tree) { + //TODO: Update this to support multiple motherboards + const fs_path mb_path = "/mboards/0"; + prop_tree->access<double>(mb_path / "tx_dsps" / boost::lexical_cast<std::string>(chan) / "rate" / "value").update(); + } + } + update_stream_states(); + + return my_streamer; +} + +/*********************************************************************** + * Async Message Receiver + **********************************************************************/ +bool n230_stream_manager::recv_async_msg(async_metadata_t &async_metadata, double timeout) +{ + return _async_md_queue->pop_with_timed_wait(async_metadata, timeout); +} + +/*********************************************************************** + * Sample Rate Updaters + **********************************************************************/ +void n230_stream_manager::update_rx_samp_rate(const size_t dspno, const double rate) +{ + boost::shared_ptr<sph::recv_packet_streamer> my_streamer = + boost::dynamic_pointer_cast<sph::recv_packet_streamer>(_rx_streamers[dspno].lock()); + if (not my_streamer) return; + my_streamer->set_samp_rate(rate); + const double adj = _resource_mgr->get_radio(dspno).ddc->get_scaling_adjustment(); + my_streamer->set_scale_factor(adj); +} + +void n230_stream_manager::update_tx_samp_rate(const size_t dspno, const double rate) +{ + boost::shared_ptr<sph::send_packet_streamer> my_streamer = + boost::dynamic_pointer_cast<sph::send_packet_streamer>(_tx_streamers[dspno].lock()); + if (not my_streamer) return; + my_streamer->set_samp_rate(rate); + const double adj = _resource_mgr->get_radio(dspno).duc->get_scaling_adjustment(); + my_streamer->set_scale_factor(adj); +} + +/*********************************************************************** + * Tick Rate Updater + **********************************************************************/ +void n230_stream_manager::update_tick_rate(const double rate) +{ + for (size_t i = 0; i < fpga::NUM_RADIOS; i++) { + radio_resource_t& perif = _resource_mgr->get_radio(i); + + boost::shared_ptr<sph::recv_packet_streamer> my_rx_streamer = + boost::dynamic_pointer_cast<sph::recv_packet_streamer>(_rx_streamers[i].lock()); + if (my_rx_streamer) my_rx_streamer->set_tick_rate(rate); + perif.framer->set_tick_rate(rate); + + boost::shared_ptr<sph::send_packet_streamer> my_tx_streamer = + boost::dynamic_pointer_cast<sph::send_packet_streamer>(_tx_streamers[i].lock()); + if (my_tx_streamer) my_tx_streamer->set_tick_rate(rate); + } +} + +/*********************************************************************** + * Stream State Updater + **********************************************************************/ +void n230_stream_manager::update_stream_states() +{ + //extract settings from state variables + const bool enb_tx0 = bool(_tx_streamers[0].lock()); + const bool enb_rx0 = bool(_rx_streamers[0].lock()); + const bool enb_tx1 = bool(_tx_streamers[1].lock()); + const bool enb_rx1 = bool(_rx_streamers[1].lock()); + + fe_state_t fe0_state = NONE_STREAMING; + if (enb_tx0 && enb_rx0) fe0_state = TXRX_STREAMING; + else if (enb_tx0) fe0_state = TX_STREAMING; + else if (enb_rx0) fe0_state = RX_STREAMING; + + fe_state_t fe1_state = NONE_STREAMING; + if (enb_tx1 && enb_rx1) fe1_state = TXRX_STREAMING; + else if (enb_tx1) fe1_state = TX_STREAMING; + else if (enb_rx1) fe1_state = RX_STREAMING; + + _resource_mgr->get_frontend_ctrl().set_stream_state(fe0_state, fe1_state); +} + +size_t n230_stream_manager::_get_rx_flow_control_window(size_t frame_size, size_t sw_buff_size) +{ + double sw_buff_max = sw_buff_size * N230_RX_SW_BUFF_FULL_FACTOR; + size_t window_in_pkts = (static_cast<size_t>(sw_buff_max) / frame_size); + if (window_in_pkts == 0) { + throw uhd::value_error("recv_buff_size must be larger than the recv_frame_size."); + } + return window_in_pkts; +} + +void n230_stream_manager::_handle_overflow(const size_t i) +{ + boost::shared_ptr<sph::recv_packet_streamer> my_streamer = + boost::dynamic_pointer_cast<sph::recv_packet_streamer>(_rx_streamers[i].lock()); + if (my_streamer->get_num_channels() == 2) { + //MIMO + //find out if we were in continuous mode before stopping + const bool in_continuous_streaming_mode = _resource_mgr->get_radio(i).framer->in_continuous_streaming_mode(); + //stop streaming + my_streamer->issue_stream_cmd(stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); + //restart streaming + if (in_continuous_streaming_mode) { + stream_cmd_t stream_cmd(stream_cmd_t::STREAM_MODE_START_CONTINUOUS); + stream_cmd.stream_now = false; + stream_cmd.time_spec = _resource_mgr->get_radio(i).time->get_time_now() + time_spec_t(0.01); + my_streamer->issue_stream_cmd(stream_cmd); + } + } else { + _resource_mgr->get_radio(i).framer->handle_overflow(); + } +} + +void n230_stream_manager::_handle_rx_flowctrl( + const sid_t& sid, + zero_copy_if::sptr xport, + boost::shared_ptr<rx_fc_cache_t> fc_cache, + const size_t last_seq) +{ + static const size_t RXFC_PACKET_LEN_IN_WORDS = 2; + static const size_t RXFC_CMD_CODE_OFFSET = 0; + static const size_t RXFC_SEQ_NUM_OFFSET = 1; + + managed_send_buffer::sptr buff = xport->get_send_buff(0.0); + if (not buff) { + throw uhd::runtime_error("handle_rx_flowctrl timed out getting a send buffer"); + } + boost::uint32_t *pkt = buff->cast<boost::uint32_t *>(); + + //recover seq32 + size_t& seq_sw = fc_cache->last_seq_in; + const size_t seq_hw = seq_sw & HW_SEQ_NUM_MASK; + if (last_seq < seq_hw) seq_sw += (HW_SEQ_NUM_MASK + 1); + seq_sw &= ~HW_SEQ_NUM_MASK; + seq_sw |= last_seq; + + //load packet info + vrt::if_packet_info_t packet_info; + packet_info.packet_type = vrt::if_packet_info_t::PACKET_TYPE_CONTEXT; + packet_info.num_payload_words32 = RXFC_PACKET_LEN_IN_WORDS; + packet_info.num_payload_bytes = packet_info.num_payload_words32*sizeof(boost::uint32_t); + packet_info.packet_count = seq_sw; + packet_info.sob = false; + packet_info.eob = false; + packet_info.sid = sid.get(); + packet_info.has_sid = true; + packet_info.has_cid = false; + packet_info.has_tsi = false; + packet_info.has_tsf = false; + packet_info.has_tlr = false; + + //load header + _cvita_hdr_pack(pkt, packet_info); + + //load payload + pkt[packet_info.num_header_words32 + RXFC_CMD_CODE_OFFSET] = uhd::htonx<boost::uint32_t>(N230_EVENT_CODE_FLOW_CTRL); + pkt[packet_info.num_header_words32 + RXFC_SEQ_NUM_OFFSET] = uhd::htonx<boost::uint32_t>(seq_sw); + + //send the buffer over the interface + buff->commit(sizeof(boost::uint32_t)*(packet_info.num_packet_words32)); +} + +void n230_stream_manager::_handle_tx_async_msgs( + boost::shared_ptr<tx_fc_cache_t> fc_cache, + zero_copy_if::sptr xport, + tick_rate_retriever_t get_tick_rate) +{ + managed_recv_buffer::sptr buff = xport->get_recv_buff(); + if (not buff) return; + + //extract packet info + vrt::if_packet_info_t if_packet_info; + if_packet_info.num_packet_words32 = buff->size()/sizeof(boost::uint32_t); + const boost::uint32_t *packet_buff = buff->cast<const boost::uint32_t *>(); + + //unpacking can fail + uint32_t (*endian_conv)(uint32_t) = uhd::ntohx; + try { + _cvita_hdr_unpack(packet_buff, if_packet_info); + endian_conv = uhd::ntohx; + } catch(const std::exception &ex) { + UHD_MSG(error) << "Error parsing async message packet: " << ex.what() << std::endl; + return; + } + + //fill in the async metadata + async_metadata_t metadata; + load_metadata_from_buff( + endian_conv, metadata, if_packet_info, packet_buff, + get_tick_rate(), fc_cache->stream_channel); + + //The FC response and the burst ack are two indicators that the radio + //consumed packets. Use them to update the FC metadata + if (metadata.event_code == N230_EVENT_CODE_FLOW_CTRL or + metadata.event_code == async_metadata_t::EVENT_CODE_BURST_ACK + ) { + const size_t seq = metadata.user_payload[0]; + fc_cache->seq_queue.push_with_pop_on_full(seq); + } + + //FC responses don't propagate up to the user so filter them here + if (metadata.event_code != N230_EVENT_CODE_FLOW_CTRL) { + fc_cache->async_queue->push_with_pop_on_full(metadata); + metadata.channel = fc_cache->device_channel; + fc_cache->old_async_queue->push_with_pop_on_full(metadata); + standard_async_msg_prints(metadata); + } +} + +managed_send_buffer::sptr n230_stream_manager::_get_tx_buff_with_flowctrl( + task::sptr /*holds ref*/, + boost::shared_ptr<tx_fc_cache_t> fc_cache, + zero_copy_if::sptr xport, + size_t fc_pkt_window, + const double timeout) +{ + while (true) + { + const size_t delta = (fc_cache->last_seq_out & HW_SEQ_NUM_MASK) - (fc_cache->last_seq_ack & HW_SEQ_NUM_MASK); + if ((delta & HW_SEQ_NUM_MASK) <= fc_pkt_window) break; + + const bool ok = fc_cache->seq_queue.pop_with_timed_wait(fc_cache->last_seq_ack, timeout); + if (not ok) return managed_send_buffer::sptr(); //timeout waiting for flow control + } + + managed_send_buffer::sptr buff = xport->get_send_buff(timeout); + if (buff) fc_cache->last_seq_out++; //update seq, this will actually be a send + return buff; +} + +size_t n230_stream_manager::_get_tx_flow_control_window( + size_t payload_size, + size_t hw_buff_size) +{ + size_t window_in_pkts = hw_buff_size / payload_size; + if (window_in_pkts == 0) { + throw uhd::value_error("send_buff_size must be larger than the send_frame_size."); + } + return window_in_pkts; +} + +double n230_stream_manager::_get_tick_rate() +{ + return _resource_mgr->get_clk_pps_ctrl().get_tick_rate(); +} + +void n230_stream_manager::_cvita_hdr_unpack( + const boost::uint32_t *packet_buff, + vrt::if_packet_info_t &if_packet_info) +{ + if_packet_info.link_type = vrt::if_packet_info_t::LINK_TYPE_CHDR; + return vrt::if_hdr_unpack_be(packet_buff, if_packet_info); +} + +void n230_stream_manager::_cvita_hdr_pack( + boost::uint32_t *packet_buff, + vrt::if_packet_info_t &if_packet_info) +{ + if_packet_info.link_type = vrt::if_packet_info_t::LINK_TYPE_CHDR; + return vrt::if_hdr_pack_be(packet_buff, if_packet_info); +} + +}}} //namespace diff --git a/host/lib/usrp/n230/n230_stream_manager.hpp b/host/lib/usrp/n230/n230_stream_manager.hpp new file mode 100644 index 000000000..7a496c4e9 --- /dev/null +++ b/host/lib/usrp/n230/n230_stream_manager.hpp @@ -0,0 +1,151 @@ +// +// Copyright 2014 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_N230_STREAM_MANAGER_HPP +#define INCLUDED_N230_STREAM_MANAGER_HPP + +#include "time_core_3000.hpp" +#include "rx_vita_core_3000.hpp" +#include <uhd/types/sid.hpp> +#include <uhd/types/device_addr.hpp> +#include <uhd/types/metadata.hpp> +#include <uhd/transport/zero_copy.hpp> +#include <uhd/transport/bounded_buffer.hpp> +#include <uhd/transport/vrt_if_packet.hpp> +#include <uhd/property_tree.hpp> +#include <uhd/utils/tasks.hpp> +#include <boost/smart_ptr.hpp> +#include "n230_device_args.hpp" +#include "n230_resource_manager.hpp" + +namespace uhd { namespace usrp { namespace n230 { + +class n230_stream_manager : public boost::noncopyable +{ +public: //Methods + n230_stream_manager( + const n230_device_args_t& dev_args, + boost::shared_ptr<n230_resource_manager> resource_mgr, + boost::weak_ptr<property_tree> prop_tree); + virtual ~n230_stream_manager(); + + rx_streamer::sptr get_rx_stream( + const uhd::stream_args_t &args); + + tx_streamer::sptr get_tx_stream( + const uhd::stream_args_t &args_); + + bool recv_async_msg( + async_metadata_t &async_metadata, + double timeout); + + void update_stream_states(); + + void update_rx_samp_rate( + const size_t dspno, const double rate); + + void update_tx_samp_rate( + const size_t dspno, const double rate); + + void update_tick_rate( + const double rate); + +private: + typedef transport::bounded_buffer<async_metadata_t> async_md_queue_t; + + struct rx_fc_cache_t + { + rx_fc_cache_t(): + last_seq_in(0){} + size_t last_seq_in; + }; + + struct tx_fc_cache_t + { + tx_fc_cache_t(): + stream_channel(0), + device_channel(0), + last_seq_out(0), + last_seq_ack(0), + seq_queue(1){} + size_t stream_channel; + size_t device_channel; + size_t last_seq_out; + size_t last_seq_ack; + transport::bounded_buffer<size_t> seq_queue; + boost::shared_ptr<async_md_queue_t> async_queue; + boost::shared_ptr<async_md_queue_t> old_async_queue; + }; + + typedef boost::function<double(void)> tick_rate_retriever_t; + + void _handle_overflow(const size_t i); + + double _get_tick_rate(); + + static size_t _get_rx_flow_control_window( + size_t frame_size, size_t sw_buff_size); + + static void _handle_rx_flowctrl( + const sid_t& sid, + transport::zero_copy_if::sptr xport, + boost::shared_ptr<rx_fc_cache_t> fc_cache, + const size_t last_seq); + + static void _handle_tx_async_msgs( + boost::shared_ptr<tx_fc_cache_t> guts, + transport::zero_copy_if::sptr xport, + tick_rate_retriever_t get_tick_rate); + + static transport::managed_send_buffer::sptr _get_tx_buff_with_flowctrl( + task::sptr /*holds ref*/, + boost::shared_ptr<tx_fc_cache_t> guts, + transport::zero_copy_if::sptr xport, + size_t fc_pkt_window, + const double timeout); + + static size_t _get_tx_flow_control_window( + size_t payload_size, + size_t hw_buff_size); + + static void _cvita_hdr_unpack( + const boost::uint32_t *packet_buff, + transport::vrt::if_packet_info_t &if_packet_info); + + static void _cvita_hdr_pack( + boost::uint32_t *packet_buff, + transport::vrt::if_packet_info_t &if_packet_info); + + const n230_device_args_t _dev_args; + boost::shared_ptr<n230_resource_manager> _resource_mgr; + //TODO: Find a way to remove this dependency + boost::weak_ptr<property_tree> _tree; + + boost::mutex _stream_setup_mutex; + uhd::msg_task::sptr _async_task; + boost::shared_ptr<async_md_queue_t> _async_md_queue; + boost::weak_ptr<uhd::tx_streamer> _tx_streamers[fpga::NUM_RADIOS]; + boost::weak_ptr<uhd::rx_streamer> _rx_streamers[fpga::NUM_RADIOS]; + stream_args_t _tx_stream_cached_args[fpga::NUM_RADIOS]; + stream_args_t _rx_stream_cached_args[fpga::NUM_RADIOS]; + + static const boost::uint32_t HW_SEQ_NUM_MASK = 0xFFF; +}; + +}}} //namespace + +#endif //INCLUDED_N230_STREAM_MANAGER_HPP diff --git a/host/lib/usrp/n230/n230_uart.cpp b/host/lib/usrp/n230/n230_uart.cpp new file mode 100644 index 000000000..20936c303 --- /dev/null +++ b/host/lib/usrp/n230/n230_uart.cpp @@ -0,0 +1,131 @@ +// +// Copyright 2013 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "n230_uart.hpp" + +#include <uhd/transport/bounded_buffer.hpp> +#include <uhd/transport/vrt_if_packet.hpp> +#include <uhd/utils/byteswap.hpp> +#include <uhd/utils/msg.hpp> +#include <uhd/types/time_spec.hpp> +#include <uhd/exception.hpp> + +using namespace uhd; +using namespace uhd::transport; + +namespace uhd { namespace usrp { namespace n230 { + +struct n230_uart_impl : n230_uart +{ + n230_uart_impl(zero_copy_if::sptr xport, const boost::uint32_t sid): + _xport(xport), + _sid(sid), + _count(0), + _char_queue(4096) + { + //this default baud divider is over 9000 + this->set_baud_divider(9001); + + //create a task to handle incoming packets + _recv_task = uhd::task::make(boost::bind(&n230_uart_impl::handle_recv, this)); + } + + void send_char(const char ch) + { + managed_send_buffer::sptr buff = _xport->get_send_buff(); + UHD_ASSERT_THROW(bool(buff)); + + vrt::if_packet_info_t packet_info; + packet_info.link_type = vrt::if_packet_info_t::LINK_TYPE_CHDR; + packet_info.packet_type = vrt::if_packet_info_t::PACKET_TYPE_CONTEXT; + packet_info.num_payload_words32 = 2; + packet_info.num_payload_bytes = packet_info.num_payload_words32*sizeof(boost::uint32_t); + packet_info.packet_count = _count++; + packet_info.sob = false; + packet_info.eob = false; + packet_info.sid = _sid; + packet_info.has_sid = true; + packet_info.has_cid = false; + packet_info.has_tsi = false; + packet_info.has_tsf = false; + packet_info.has_tlr = false; + + boost::uint32_t *packet_buff = buff->cast<boost::uint32_t *>(); + vrt::if_hdr_pack_le(packet_buff, packet_info); + packet_buff[packet_info.num_header_words32+0] = uhd::htonx(boost::uint32_t(_baud_div)); + packet_buff[packet_info.num_header_words32+1] = uhd::htonx(boost::uint32_t(ch)); + buff->commit(packet_info.num_packet_words32*sizeof(boost::uint32_t)); + } + + void write_uart(const std::string &buff) + { + static bool r_sent = false; + for (size_t i = 0; i < buff.size(); i++) + { + if (buff[i] == '\n' and not r_sent) this->send_char('\r'); + this->send_char(buff[i]); + r_sent = (buff[i] == '\r'); + } + } + + std::string read_uart(double timeout) + { + std::string line; + char ch = '\0'; + while (_char_queue.pop_with_timed_wait(ch, timeout)) + { + if (ch == '\r') continue; + line += std::string(&ch, 1); + if (ch == '\n') return line; + } + return line; + } + + void handle_recv(void) + { + managed_recv_buffer::sptr buff = _xport->get_recv_buff(); + if (not buff) + return; + const boost::uint32_t *packet_buff = buff->cast<const boost::uint32_t *>(); + vrt::if_packet_info_t packet_info; + packet_info.link_type = vrt::if_packet_info_t::LINK_TYPE_CHDR; + packet_info.num_packet_words32 = buff->size()/sizeof(boost::uint32_t); + vrt::if_hdr_unpack_be(packet_buff, packet_info); + const char ch = char(uhd::ntohx(packet_buff[packet_info.num_header_words32+1])); + _char_queue.push_with_pop_on_full(ch); + } + + void set_baud_divider(const double baud_div) + { + _baud_div = size_t(baud_div + 0.5); + } + + const zero_copy_if::sptr _xport; + const boost::uint32_t _sid; + size_t _count; + size_t _baud_div; + bounded_buffer<char> _char_queue; + uhd::task::sptr _recv_task; +}; + + +n230_uart::sptr n230_uart::make(zero_copy_if::sptr xport, const boost::uint32_t sid) +{ + return n230_uart::sptr(new n230_uart_impl(xport, sid)); +} + +}}} //namespace diff --git a/host/lib/usrp/n230/n230_uart.hpp b/host/lib/usrp/n230/n230_uart.hpp new file mode 100644 index 000000000..0bde12ab2 --- /dev/null +++ b/host/lib/usrp/n230/n230_uart.hpp @@ -0,0 +1,38 @@ +// +// Copyright 2013 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_N230_UART_HPP +#define INCLUDED_N230_UART_HPP + +#include <uhd/transport/zero_copy.hpp> +#include <uhd/types/serial.hpp> //uart iface +#include <uhd/utils/tasks.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +namespace uhd { namespace usrp { namespace n230 { + +class n230_uart: boost::noncopyable, public uhd::uart_iface +{ +public: + typedef boost::shared_ptr<n230_uart> sptr; + static sptr make(uhd::transport::zero_copy_if::sptr, const boost::uint32_t sid); + virtual void set_baud_divider(const double baud_div) = 0; +}; + +}}} //namespace + +#endif /* INCLUDED_N230_UART_HPP */ diff --git a/host/lib/usrp/usrp1/CMakeLists.txt b/host/lib/usrp/usrp1/CMakeLists.txt index 47344e841..6924ba3b0 100644 --- a/host/lib/usrp/usrp1/CMakeLists.txt +++ b/host/lib/usrp/usrp1/CMakeLists.txt @@ -22,8 +22,6 @@ ######################################################################## # Conditionally configure the USRP1 support ######################################################################## -LIBUHD_REGISTER_COMPONENT("USRP1" ENABLE_USRP1 ON "ENABLE_LIBUHD;ENABLE_USB" OFF OFF) - IF(ENABLE_USRP1) LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/codec_ctrl.cpp diff --git a/host/lib/usrp/usrp1/dboard_iface.cpp b/host/lib/usrp/usrp1/dboard_iface.cpp index 4c3141d9e..b8d651694 100644 --- a/host/lib/usrp/usrp1/dboard_iface.cpp +++ b/host/lib/usrp/usrp1/dboard_iface.cpp @@ -63,6 +63,7 @@ using namespace uhd; using namespace uhd::usrp; +using namespace uhd::usrp::gpio_atr; using namespace boost::assign; static const dboard_id_t tvrx_id(0x0040); @@ -106,12 +107,23 @@ public: void write_aux_dac(unit_t, aux_dac_t, double); double read_aux_adc(unit_t, aux_adc_t); + void set_pin_ctrl(unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_pin_ctrl(unit_t unit); + void set_atr_reg(unit_t unit, atr_reg_t reg, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_atr_reg(unit_t unit, atr_reg_t reg); + void set_gpio_ddr(unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_gpio_ddr(unit_t unit); + void set_gpio_out(unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_gpio_out(unit_t unit); + boost::uint32_t read_gpio(unit_t unit); + void _set_pin_ctrl(unit_t, boost::uint16_t); void _set_atr_reg(unit_t, atr_reg_t, boost::uint16_t); void _set_gpio_ddr(unit_t, boost::uint16_t); void _set_gpio_out(unit_t, boost::uint16_t); - void set_gpio_debug(unit_t, int); - boost::uint16_t read_gpio(unit_t); + + void set_command_time(const uhd::time_spec_t& t); + uhd::time_spec_t get_command_time(void); void write_i2c(boost::uint16_t, const byte_vector_t &); byte_vector_t read_i2c(boost::uint16_t, size_t); @@ -131,6 +143,7 @@ public: double get_clock_rate(unit_t); void set_clock_enabled(unit_t, bool); double get_codec_rate(unit_t); + void set_fe_connection(unit_t unit, const fe_connection_t& fe_conn); private: usrp1_iface::sptr _iface; @@ -139,6 +152,8 @@ private: const usrp1_impl::dboard_slot_t _dboard_slot; const double &_master_clock_rate; const dboard_id_t _rx_dboard_id; + uhd::dict<unit_t, boost::uint16_t> _pin_ctrl, _gpio_out, _gpio_ddr; + uhd::dict<unit_t, uhd::dict<atr_reg_t, boost::uint16_t> > _atr_regs; }; /*********************************************************************** @@ -217,6 +232,65 @@ double usrp1_dboard_iface::get_codec_rate(unit_t){ /*********************************************************************** * GPIO **********************************************************************/ +template <typename T> +static T shadow_it(T &shadow, const T &value, const T &mask){ + shadow = (shadow & ~mask) | (value & mask); + return shadow; +} + +void usrp1_dboard_iface::set_pin_ctrl(unit_t unit, boost::uint32_t value, boost::uint32_t mask){ + _set_pin_ctrl(unit, shadow_it(_pin_ctrl[unit], static_cast<boost::uint16_t>(value), static_cast<boost::uint16_t>(mask))); +} + +boost::uint32_t usrp1_dboard_iface::get_pin_ctrl(unit_t unit){ + return _pin_ctrl[unit]; +} + +void usrp1_dboard_iface::set_atr_reg(unit_t unit, atr_reg_t reg, boost::uint32_t value, boost::uint32_t mask){ + _set_atr_reg(unit, reg, shadow_it(_atr_regs[unit][reg], static_cast<boost::uint16_t>(value), static_cast<boost::uint16_t>(mask))); +} + +boost::uint32_t usrp1_dboard_iface::get_atr_reg(unit_t unit, atr_reg_t reg){ + return _atr_regs[unit][reg]; +} + +void usrp1_dboard_iface::set_gpio_ddr(unit_t unit, boost::uint32_t value, boost::uint32_t mask){ + _set_gpio_ddr(unit, shadow_it(_gpio_ddr[unit], static_cast<boost::uint16_t>(value), static_cast<boost::uint16_t>(mask))); +} + +boost::uint32_t usrp1_dboard_iface::get_gpio_ddr(unit_t unit){ + return _gpio_ddr[unit]; +} + +void usrp1_dboard_iface::set_gpio_out(unit_t unit, boost::uint32_t value, boost::uint32_t mask){ + _set_gpio_out(unit, shadow_it(_gpio_out[unit], static_cast<boost::uint16_t>(value), static_cast<boost::uint16_t>(mask))); +} + +boost::uint32_t usrp1_dboard_iface::get_gpio_out(unit_t unit){ + return _gpio_out[unit]; +} + +boost::uint32_t usrp1_dboard_iface::read_gpio(unit_t unit) +{ + boost::uint32_t out_value; + + if (_dboard_slot == usrp1_impl::DBOARD_SLOT_A) + out_value = _iface->peek32(1); + else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) + out_value = _iface->peek32(2); + else + UHD_THROW_INVALID_CODE_PATH(); + + switch(unit) { + case UNIT_RX: + return (boost::uint32_t)((out_value >> 16) & 0x0000ffff); + case UNIT_TX: + return (boost::uint32_t)((out_value >> 0) & 0x0000ffff); + default: UHD_THROW_INVALID_CODE_PATH(); + } + UHD_ASSERT_THROW(false); +} + void usrp1_dboard_iface::_set_pin_ctrl(unit_t unit, boost::uint16_t value) { switch(unit) { @@ -232,6 +306,7 @@ void usrp1_dboard_iface::_set_pin_ctrl(unit_t unit, boost::uint16_t value) else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) _iface->poke32(FR_ATR_MASK_2, value); break; + default: UHD_THROW_INVALID_CODE_PATH(); } } @@ -250,6 +325,7 @@ void usrp1_dboard_iface::_set_gpio_ddr(unit_t unit, boost::uint16_t value) else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) _iface->poke32(FR_OE_2, 0xffff0000 | value); break; + default: UHD_THROW_INVALID_CODE_PATH(); } } @@ -268,34 +344,10 @@ void usrp1_dboard_iface::_set_gpio_out(unit_t unit, boost::uint16_t value) else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) _iface->poke32(FR_IO_2, 0xffff0000 | value); break; + default: UHD_THROW_INVALID_CODE_PATH(); } } -void usrp1_dboard_iface::set_gpio_debug(unit_t, int) -{ - /* NOP */ -} - -boost::uint16_t usrp1_dboard_iface::read_gpio(unit_t unit) -{ - boost::uint32_t out_value; - - if (_dboard_slot == usrp1_impl::DBOARD_SLOT_A) - out_value = _iface->peek32(1); - else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) - out_value = _iface->peek32(2); - else - UHD_THROW_INVALID_CODE_PATH(); - - switch(unit) { - case UNIT_RX: - return (boost::uint16_t)((out_value >> 16) & 0x0000ffff); - case UNIT_TX: - return (boost::uint16_t)((out_value >> 0) & 0x0000ffff); - } - UHD_ASSERT_THROW(false); -} - void usrp1_dboard_iface::_set_atr_reg(unit_t unit, atr_reg_t atr, boost::uint16_t value) { @@ -316,6 +368,7 @@ void usrp1_dboard_iface::_set_atr_reg(unit_t unit, else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) _iface->poke32(FR_ATR_RXVAL_2, value); break; + default: UHD_THROW_INVALID_CODE_PATH(); } } else if (atr == ATR_REG_FULL_DUPLEX) { switch(unit) { @@ -331,6 +384,7 @@ void usrp1_dboard_iface::_set_atr_reg(unit_t unit, else if (_dboard_slot == usrp1_impl::DBOARD_SLOT_B) _iface->poke32(FR_ATR_TXVAL_2, value); break; + default: UHD_THROW_INVALID_CODE_PATH(); } } } @@ -361,6 +415,8 @@ static boost::uint32_t unit_to_otw_spi_dev(dboard_iface::unit_t unit, return SPI_ENABLE_RX_B; else break; + default: + break; } UHD_THROW_INVALID_CODE_PATH(); } @@ -429,3 +485,23 @@ double usrp1_dboard_iface::read_aux_adc(dboard_iface::unit_t unit, return _codec->read_aux_adc(unit_to_which_to_aux_adc[unit][which]); } + +/*********************************************************************** + * Unsupported + **********************************************************************/ + +void usrp1_dboard_iface::set_command_time(const uhd::time_spec_t&) +{ + throw uhd::not_implemented_error("timed command support not implemented"); +} + +uhd::time_spec_t usrp1_dboard_iface::get_command_time() +{ + throw uhd::not_implemented_error("timed command support not implemented"); +} + +void usrp1_dboard_iface::set_fe_connection(unit_t, const fe_connection_t&) +{ + throw uhd::not_implemented_error("fe connection configuration support not implemented"); +} + diff --git a/host/lib/usrp/usrp1/usrp1_impl.cpp b/host/lib/usrp/usrp1/usrp1_impl.cpp index dbd5408e8..5e1a70a8f 100644 --- a/host/lib/usrp/usrp1/usrp1_impl.cpp +++ b/host/lib/usrp/usrp1/usrp1_impl.cpp @@ -209,13 +209,13 @@ usrp1_impl::usrp1_impl(const device_addr_t &device_addr){ const fs_path mb_path = "/mboards/0"; _tree->create<std::string>(mb_path / "name").set("USRP1"); _tree->create<std::string>(mb_path / "load_eeprom") - .subscribe(boost::bind(&fx2_ctrl::usrp_load_eeprom, _fx2_ctrl, _1)); + .add_coerced_subscriber(boost::bind(&fx2_ctrl::usrp_load_eeprom, _fx2_ctrl, _1)); //////////////////////////////////////////////////////////////////// // create user-defined control objects //////////////////////////////////////////////////////////////////// _tree->create<std::pair<boost::uint8_t, boost::uint32_t> >(mb_path / "user" / "regs") - .subscribe(boost::bind(&usrp1_impl::set_reg, this, _1)); + .add_coerced_subscriber(boost::bind(&usrp1_impl::set_reg, this, _1)); //////////////////////////////////////////////////////////////////// // setup the mboard eeprom @@ -223,7 +223,7 @@ usrp1_impl::usrp1_impl(const device_addr_t &device_addr){ const mboard_eeprom_t mb_eeprom(*_fx2_ctrl, USRP1_EEPROM_MAP_KEY); _tree->create<mboard_eeprom_t>(mb_path / "eeprom") .set(mb_eeprom) - .subscribe(boost::bind(&usrp1_impl::set_mb_eeprom, this, _1)); + .add_coerced_subscriber(boost::bind(&usrp1_impl::set_mb_eeprom, this, _1)); //////////////////////////////////////////////////////////////////// // create clock control objects @@ -247,7 +247,7 @@ usrp1_impl::usrp1_impl(const device_addr_t &device_addr){ } UHD_MSG(status) << boost::format("Using FPGA clock rate of %fMHz...") % (_master_clock_rate/1e6) << std::endl; _tree->create<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&usrp1_impl::update_tick_rate, this, _1)) + .add_coerced_subscriber(boost::bind(&usrp1_impl::update_tick_rate, this, _1)) .set(_master_clock_rate); //////////////////////////////////////////////////////////////////// @@ -260,13 +260,13 @@ usrp1_impl::usrp1_impl(const device_addr_t &device_addr){ _tree->create<std::string>(rx_codec_path / "name").set("ad9522"); _tree->create<meta_range_t>(rx_codec_path / "gains/pga/range").set(usrp1_codec_ctrl::rx_pga_gain_range); _tree->create<double>(rx_codec_path / "gains/pga/value") - .coerce(boost::bind(&usrp1_impl::update_rx_codec_gain, this, db, _1)) + .set_coercer(boost::bind(&usrp1_impl::update_rx_codec_gain, this, db, _1)) .set(0.0); _tree->create<std::string>(tx_codec_path / "name").set("ad9522"); _tree->create<meta_range_t>(tx_codec_path / "gains/pga/range").set(usrp1_codec_ctrl::tx_pga_gain_range); _tree->create<double>(tx_codec_path / "gains/pga/value") - .subscribe(boost::bind(&usrp1_codec_ctrl::set_tx_pga_gain, _dbc[db].codec, _1)) - .publish(boost::bind(&usrp1_codec_ctrl::get_tx_pga_gain, _dbc[db].codec)) + .add_coerced_subscriber(boost::bind(&usrp1_codec_ctrl::set_tx_pga_gain, _dbc[db].codec, _1)) + .set_publisher(boost::bind(&usrp1_codec_ctrl::get_tx_pga_gain, _dbc[db].codec)) .set(0.0); } @@ -281,18 +281,18 @@ usrp1_impl::usrp1_impl(const device_addr_t &device_addr){ //////////////////////////////////////////////////////////////////// _tree->create<subdev_spec_t>(mb_path / "rx_subdev_spec") .set(subdev_spec_t()) - .subscribe(boost::bind(&usrp1_impl::update_rx_subdev_spec, this, _1)); + .add_coerced_subscriber(boost::bind(&usrp1_impl::update_rx_subdev_spec, this, _1)); _tree->create<subdev_spec_t>(mb_path / "tx_subdev_spec") .set(subdev_spec_t()) - .subscribe(boost::bind(&usrp1_impl::update_tx_subdev_spec, this, _1)); + .add_coerced_subscriber(boost::bind(&usrp1_impl::update_tx_subdev_spec, this, _1)); BOOST_FOREACH(const std::string &db, _dbc.keys()){ const fs_path rx_fe_path = mb_path / "rx_frontends" / db; _tree->create<std::complex<double> >(rx_fe_path / "dc_offset" / "value") - .coerce(boost::bind(&usrp1_impl::set_rx_dc_offset, this, db, _1)) + .set_coercer(boost::bind(&usrp1_impl::set_rx_dc_offset, this, db, _1)) .set(std::complex<double>(0.0, 0.0)); _tree->create<bool>(rx_fe_path / "dc_offset" / "enable") - .subscribe(boost::bind(&usrp1_impl::set_enb_rx_dc_offset, this, db, _1)) + .add_coerced_subscriber(boost::bind(&usrp1_impl::set_enb_rx_dc_offset, this, db, _1)) .set(true); } @@ -303,19 +303,19 @@ usrp1_impl::usrp1_impl(const device_addr_t &device_addr){ for (size_t dspno = 0; dspno < get_num_ddcs(); dspno++){ fs_path rx_dsp_path = mb_path / str(boost::format("rx_dsps/%u") % dspno); _tree->create<meta_range_t>(rx_dsp_path / "rate/range") - .publish(boost::bind(&usrp1_impl::get_rx_dsp_host_rates, this)); + .set_publisher(boost::bind(&usrp1_impl::get_rx_dsp_host_rates, this)); _tree->create<double>(rx_dsp_path / "rate/value") .set(1e6) //some default rate - .coerce(boost::bind(&usrp1_impl::update_rx_samp_rate, this, dspno, _1)); + .set_coercer(boost::bind(&usrp1_impl::update_rx_samp_rate, this, dspno, _1)); _tree->create<double>(rx_dsp_path / "freq/value") - .coerce(boost::bind(&usrp1_impl::update_rx_dsp_freq, this, dspno, _1)); + .set_coercer(boost::bind(&usrp1_impl::update_rx_dsp_freq, this, dspno, _1)); _tree->create<meta_range_t>(rx_dsp_path / "freq/range") - .publish(boost::bind(&usrp1_impl::get_rx_dsp_freq_range, this)); + .set_publisher(boost::bind(&usrp1_impl::get_rx_dsp_freq_range, this)); _tree->create<stream_cmd_t>(rx_dsp_path / "stream_cmd"); if (dspno == 0){ - //only subscribe the callback for dspno 0 since it will stream all dsps + //only add_coerced_subscriber the callback for dspno 0 since it will stream all dsps _tree->access<stream_cmd_t>(rx_dsp_path / "stream_cmd") - .subscribe(boost::bind(&soft_time_ctrl::issue_stream_cmd, _soft_time_ctrl, _1)); + .add_coerced_subscriber(boost::bind(&soft_time_ctrl::issue_stream_cmd, _soft_time_ctrl, _1)); } } @@ -326,22 +326,22 @@ usrp1_impl::usrp1_impl(const device_addr_t &device_addr){ for (size_t dspno = 0; dspno < get_num_ducs(); dspno++){ fs_path tx_dsp_path = mb_path / str(boost::format("tx_dsps/%u") % dspno); _tree->create<meta_range_t>(tx_dsp_path / "rate/range") - .publish(boost::bind(&usrp1_impl::get_tx_dsp_host_rates, this)); + .set_publisher(boost::bind(&usrp1_impl::get_tx_dsp_host_rates, this)); _tree->create<double>(tx_dsp_path / "rate/value") .set(1e6) //some default rate - .coerce(boost::bind(&usrp1_impl::update_tx_samp_rate, this, dspno, _1)); + .set_coercer(boost::bind(&usrp1_impl::update_tx_samp_rate, this, dspno, _1)); _tree->create<double>(tx_dsp_path / "freq/value") - .coerce(boost::bind(&usrp1_impl::update_tx_dsp_freq, this, dspno, _1)); + .set_coercer(boost::bind(&usrp1_impl::update_tx_dsp_freq, this, dspno, _1)); _tree->create<meta_range_t>(tx_dsp_path / "freq/range") - .publish(boost::bind(&usrp1_impl::get_tx_dsp_freq_range, this)); + .set_publisher(boost::bind(&usrp1_impl::get_tx_dsp_freq_range, this)); } //////////////////////////////////////////////////////////////////// // create time control objects //////////////////////////////////////////////////////////////////// _tree->create<time_spec_t>(mb_path / "time/now") - .publish(boost::bind(&soft_time_ctrl::get_time, _soft_time_ctrl)) - .subscribe(boost::bind(&soft_time_ctrl::set_time, _soft_time_ctrl, _1)); + .set_publisher(boost::bind(&soft_time_ctrl::get_time, _soft_time_ctrl)) + .add_coerced_subscriber(boost::bind(&soft_time_ctrl::set_time, _soft_time_ctrl, _1)); _tree->create<std::vector<std::string> >(mb_path / "clock_source/options").set(std::vector<std::string>(1, "internal")); _tree->create<std::vector<std::string> >(mb_path / "time_source/options").set(std::vector<std::string>(1, "none")); @@ -365,24 +365,23 @@ usrp1_impl::usrp1_impl(const device_addr_t &device_addr){ //create the properties and register subscribers _tree->create<dboard_eeprom_t>(mb_path / "dboards" / db/ "rx_eeprom") .set(rx_db_eeprom) - .subscribe(boost::bind(&usrp1_impl::set_db_eeprom, this, db, "rx", _1)); + .add_coerced_subscriber(boost::bind(&usrp1_impl::set_db_eeprom, this, db, "rx", _1)); _tree->create<dboard_eeprom_t>(mb_path / "dboards" / db/ "tx_eeprom") .set(tx_db_eeprom) - .subscribe(boost::bind(&usrp1_impl::set_db_eeprom, this, db, "tx", _1)); + .add_coerced_subscriber(boost::bind(&usrp1_impl::set_db_eeprom, this, db, "tx", _1)); _tree->create<dboard_eeprom_t>(mb_path / "dboards" / db/ "gdb_eeprom") .set(gdb_eeprom) - .subscribe(boost::bind(&usrp1_impl::set_db_eeprom, this, db, "gdb", _1)); + .add_coerced_subscriber(boost::bind(&usrp1_impl::set_db_eeprom, this, db, "gdb", _1)); //create a new dboard interface and manager - _dbc[db].dboard_iface = make_dboard_iface( + dboard_iface::sptr dboard_iface = make_dboard_iface( _iface, _dbc[db].codec, (db == "A")? DBOARD_SLOT_A : DBOARD_SLOT_B, _master_clock_rate, rx_db_eeprom.id ); - _tree->create<dboard_iface::sptr>(mb_path / "dboards" / db/ "iface").set(_dbc[db].dboard_iface); _dbc[db].dboard_manager = dboard_manager::make( rx_db_eeprom.id, tx_db_eeprom.id, gdb_eeprom.id, - _dbc[db].dboard_iface, _tree->subtree(mb_path / "dboards" / db) + dboard_iface, _tree->subtree(mb_path / "dboards" / db) ); //init the subdev specs if we have a dboard (wont leave this loop empty) diff --git a/host/lib/usrp/usrp1/usrp1_impl.hpp b/host/lib/usrp/usrp1/usrp1_impl.hpp index 012bc0794..da901bd6c 100644 --- a/host/lib/usrp/usrp1/usrp1_impl.hpp +++ b/host/lib/usrp/usrp1/usrp1_impl.hpp @@ -92,7 +92,6 @@ private: uhd::transport::usb_zero_copy::sptr _data_transport; struct db_container_type{ usrp1_codec_ctrl::sptr codec; - uhd::usrp::dboard_iface::sptr dboard_iface; uhd::usrp::dboard_manager::sptr dboard_manager; }; uhd::dict<std::string, db_container_type> _dbc; diff --git a/host/lib/usrp/usrp2/CMakeLists.txt b/host/lib/usrp/usrp2/CMakeLists.txt index d9894adaf..edf77a654 100644 --- a/host/lib/usrp/usrp2/CMakeLists.txt +++ b/host/lib/usrp/usrp2/CMakeLists.txt @@ -22,8 +22,6 @@ ######################################################################## # Conditionally configure the USRP2 support ######################################################################## -LIBUHD_REGISTER_COMPONENT("USRP2" ENABLE_USRP2 ON "ENABLE_LIBUHD" OFF OFF) - IF(ENABLE_USRP2) LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/clock_ctrl.cpp diff --git a/host/lib/usrp/usrp2/dboard_iface.cpp b/host/lib/usrp/usrp2/dboard_iface.cpp index 7bb69c7b7..b4066898e 100644 --- a/host/lib/usrp/usrp2/dboard_iface.cpp +++ b/host/lib/usrp/usrp2/dboard_iface.cpp @@ -54,12 +54,16 @@ public: void write_aux_dac(unit_t, aux_dac_t, double); double read_aux_adc(unit_t, aux_adc_t); - void _set_pin_ctrl(unit_t, boost::uint16_t); - void _set_atr_reg(unit_t, atr_reg_t, boost::uint16_t); - void _set_gpio_ddr(unit_t, boost::uint16_t); - void _set_gpio_out(unit_t, boost::uint16_t); - void set_gpio_debug(unit_t, int); - boost::uint16_t read_gpio(unit_t); + void set_pin_ctrl(unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_pin_ctrl(unit_t unit); + void set_atr_reg(unit_t unit, atr_reg_t reg, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_atr_reg(unit_t unit, atr_reg_t reg); + void set_gpio_ddr(unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_gpio_ddr(unit_t unit); + void set_gpio_out(unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_gpio_out(unit_t unit); + boost::uint32_t read_gpio(unit_t unit); + void set_command_time(const uhd::time_spec_t& t); uhd::time_spec_t get_command_time(void); @@ -71,6 +75,7 @@ public: std::vector<double> get_clock_rates(unit_t); void set_clock_enabled(unit_t, bool); double get_codec_rate(unit_t); + void set_fe_connection(unit_t unit, const fe_connection_t& fe_conn); void write_spi( unit_t unit, @@ -149,18 +154,22 @@ usrp2_dboard_iface::~usrp2_dboard_iface(void){ * Clocks **********************************************************************/ void usrp2_dboard_iface::set_clock_rate(unit_t unit, double rate){ + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); _clock_rates[unit] = rate; //set to shadow switch(unit){ case UNIT_RX: _clock_ctrl->set_rate_rx_dboard_clock(rate); return; case UNIT_TX: _clock_ctrl->set_rate_tx_dboard_clock(rate); return; + default: UHD_THROW_INVALID_CODE_PATH(); } } double usrp2_dboard_iface::get_clock_rate(unit_t unit){ + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); return _clock_rates[unit]; //get from shadow } std::vector<double> usrp2_dboard_iface::get_clock_rates(unit_t unit){ + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); switch(unit){ case UNIT_RX: return _clock_ctrl->get_rates_rx_dboard_clock(); case UNIT_TX: return _clock_ctrl->get_rates_tx_dboard_clock(); @@ -169,40 +178,56 @@ std::vector<double> usrp2_dboard_iface::get_clock_rates(unit_t unit){ } void usrp2_dboard_iface::set_clock_enabled(unit_t unit, bool enb){ + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); switch(unit){ - case UNIT_RX: _clock_ctrl->enable_rx_dboard_clock(enb); return; - case UNIT_TX: _clock_ctrl->enable_tx_dboard_clock(enb); return; + case UNIT_RX: _clock_ctrl->enable_rx_dboard_clock(enb); return; + case UNIT_TX: _clock_ctrl->enable_tx_dboard_clock(enb); return; + case UNIT_BOTH: set_clock_enabled(UNIT_RX, enb); set_clock_enabled(UNIT_TX, enb); return; } } -double usrp2_dboard_iface::get_codec_rate(unit_t){ +double usrp2_dboard_iface::get_codec_rate(unit_t unit){ + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); return _clock_ctrl->get_master_clock_rate(); } + /*********************************************************************** * GPIO **********************************************************************/ -void usrp2_dboard_iface::_set_pin_ctrl(unit_t unit, boost::uint16_t value){ - return _gpio->set_pin_ctrl(unit, value); +void usrp2_dboard_iface::set_pin_ctrl(unit_t unit, boost::uint32_t value, boost::uint32_t mask){ + _gpio->set_pin_ctrl(unit, static_cast<boost::uint16_t>(value), static_cast<boost::uint16_t>(mask)); } -void usrp2_dboard_iface::_set_gpio_ddr(unit_t unit, boost::uint16_t value){ - return _gpio->set_gpio_ddr(unit, value); +boost::uint32_t usrp2_dboard_iface::get_pin_ctrl(unit_t unit){ + return static_cast<boost::uint32_t>(_gpio->get_pin_ctrl(unit)); } -void usrp2_dboard_iface::_set_gpio_out(unit_t unit, boost::uint16_t value){ - return _gpio->set_gpio_out(unit, value); +void usrp2_dboard_iface::set_atr_reg(unit_t unit, atr_reg_t reg, boost::uint32_t value, boost::uint32_t mask){ + _gpio->set_atr_reg(unit, reg, static_cast<boost::uint16_t>(value), static_cast<boost::uint16_t>(mask)); } -boost::uint16_t usrp2_dboard_iface::read_gpio(unit_t unit){ - return _gpio->read_gpio(unit); +boost::uint32_t usrp2_dboard_iface::get_atr_reg(unit_t unit, atr_reg_t reg){ + return static_cast<boost::uint32_t>(_gpio->get_atr_reg(unit, reg)); +} + +void usrp2_dboard_iface::set_gpio_ddr(unit_t unit, boost::uint32_t value, boost::uint32_t mask){ + _gpio->set_gpio_ddr(unit, static_cast<boost::uint16_t>(value), static_cast<boost::uint16_t>(mask)); +} + +boost::uint32_t usrp2_dboard_iface::get_gpio_ddr(unit_t unit){ + return static_cast<boost::uint32_t>(_gpio->get_gpio_ddr(unit)); } -void usrp2_dboard_iface::_set_atr_reg(unit_t unit, atr_reg_t atr, boost::uint16_t value){ - return _gpio->set_atr_reg(unit, atr, value); +void usrp2_dboard_iface::set_gpio_out(unit_t unit, boost::uint32_t value, boost::uint32_t mask){ + _gpio->set_gpio_out(unit, static_cast<boost::uint16_t>(value), static_cast<boost::uint16_t>(mask)); } -void usrp2_dboard_iface::set_gpio_debug(unit_t, int){ - throw uhd::not_implemented_error("no set_gpio_debug implemented"); +boost::uint32_t usrp2_dboard_iface::get_gpio_out(unit_t unit){ + return static_cast<boost::uint32_t>(_gpio->get_gpio_out(unit)); +} + +boost::uint32_t usrp2_dboard_iface::read_gpio(unit_t unit){ + return _gpio->read_gpio(unit); } /*********************************************************************** @@ -219,6 +244,7 @@ void usrp2_dboard_iface::write_spi( boost::uint32_t data, size_t num_bits ){ + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); _spi_iface->write_spi(unit_to_spi_dev[unit], config, data, num_bits); } @@ -228,6 +254,7 @@ boost::uint32_t usrp2_dboard_iface::read_write_spi( boost::uint32_t data, size_t num_bits ){ + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); return _spi_iface->read_spi(unit_to_spi_dev[unit], config, data, num_bits); } @@ -250,6 +277,7 @@ void usrp2_dboard_iface::_write_aux_dac(unit_t unit){ (UNIT_RX, SPI_SS_RX_DAC) (UNIT_TX, SPI_SS_TX_DAC) ; + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); _spi_iface->write_spi( unit_to_spi_dac[unit], spi_config_t::EDGE_FALL, _dac_regs[unit].get_reg(), 24 @@ -257,6 +285,8 @@ void usrp2_dboard_iface::_write_aux_dac(unit_t unit){ } void usrp2_dboard_iface::write_aux_dac(unit_t unit, aux_dac_t which, double value){ + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); + _dac_regs[unit].data = boost::math::iround(4095*value/3.3); _dac_regs[unit].cmd = ad5623_regs_t::CMD_WR_UP_DAC_CHAN_N; @@ -285,6 +315,8 @@ double usrp2_dboard_iface::read_aux_adc(unit_t unit, aux_adc_t which){ (UNIT_TX, SPI_SS_TX_ADC) ; + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); + //setup spi config args spi_config_t config; config.mosi_edge = spi_config_t::EDGE_FALL; @@ -320,3 +352,8 @@ void usrp2_dboard_iface::set_command_time(const uhd::time_spec_t& t) { _wb_iface->set_time(t); } + +void usrp2_dboard_iface::set_fe_connection(unit_t, const fe_connection_t&) +{ + throw uhd::not_implemented_error("fe connection configuration support not implemented"); +} diff --git a/host/lib/usrp/usrp2/usrp2_impl.cpp b/host/lib/usrp/usrp2/usrp2_impl.cpp index 7b59dfaf1..b0c29392c 100644 --- a/host/lib/usrp/usrp2/usrp2_impl.cpp +++ b/host/lib/usrp/usrp2/usrp2_impl.cpp @@ -474,15 +474,15 @@ usrp2_impl::usrp2_impl(const device_addr_t &_device_addr) : //////////////////////////////////////////////////////////////// _tree->create<mboard_eeprom_t>(mb_path / "eeprom") .set(_mbc[mb].iface->mb_eeprom) - .subscribe(boost::bind(&usrp2_impl::set_mb_eeprom, this, mb, _1)); + .add_coerced_subscriber(boost::bind(&usrp2_impl::set_mb_eeprom, this, mb, _1)); //////////////////////////////////////////////////////////////// // create clock control objects //////////////////////////////////////////////////////////////// _mbc[mb].clock = usrp2_clock_ctrl::make(_mbc[mb].iface, _mbc[mb].spiface); _tree->create<double>(mb_path / "tick_rate") - .publish(boost::bind(&usrp2_clock_ctrl::get_master_clock_rate, _mbc[mb].clock)) - .subscribe(boost::bind(&usrp2_impl::update_tick_rate, this, _1)); + .set_publisher(boost::bind(&usrp2_clock_ctrl::get_master_clock_rate, _mbc[mb].clock)) + .add_coerced_subscriber(boost::bind(&usrp2_impl::update_tick_rate, this, _1)); //////////////////////////////////////////////////////////////// // create codec control objects @@ -500,10 +500,10 @@ usrp2_impl::usrp2_impl(const device_addr_t &_device_addr) : _tree->create<std::string>(rx_codec_path / "name").set("ads62p44"); _tree->create<meta_range_t>(rx_codec_path / "gains/digital/range").set(meta_range_t(0, 6.0, 0.5)); _tree->create<double>(rx_codec_path / "gains/digital/value") - .subscribe(boost::bind(&usrp2_codec_ctrl::set_rx_digital_gain, _mbc[mb].codec, _1)).set(0); + .add_coerced_subscriber(boost::bind(&usrp2_codec_ctrl::set_rx_digital_gain, _mbc[mb].codec, _1)).set(0); _tree->create<meta_range_t>(rx_codec_path / "gains/fine/range").set(meta_range_t(0, 0.5, 0.05)); _tree->create<double>(rx_codec_path / "gains/fine/value") - .subscribe(boost::bind(&usrp2_codec_ctrl::set_rx_digital_fine_gain, _mbc[mb].codec, _1)).set(0); + .add_coerced_subscriber(boost::bind(&usrp2_codec_ctrl::set_rx_digital_fine_gain, _mbc[mb].codec, _1)).set(0); }break; case usrp2_iface::USRP2_REV3: @@ -550,7 +550,7 @@ usrp2_impl::usrp2_impl(const device_addr_t &_device_addr) : BOOST_FOREACH(const std::string &name, _mbc[mb].gps->get_sensors()) { _tree->create<sensor_value_t>(mb_path / "sensors" / name) - .publish(boost::bind(&gps_ctrl::get_sensor, _mbc[mb].gps, name)); + .set_publisher(boost::bind(&gps_ctrl::get_sensor, _mbc[mb].gps, name)); } } else @@ -563,9 +563,9 @@ usrp2_impl::usrp2_impl(const device_addr_t &_device_addr) : // and do the misc mboard sensors //////////////////////////////////////////////////////////////// _tree->create<sensor_value_t>(mb_path / "sensors/mimo_locked") - .publish(boost::bind(&usrp2_impl::get_mimo_locked, this, mb)); + .set_publisher(boost::bind(&usrp2_impl::get_mimo_locked, this, mb)); _tree->create<sensor_value_t>(mb_path / "sensors/ref_locked") - .publish(boost::bind(&usrp2_impl::get_ref_locked, this, mb)); + .set_publisher(boost::bind(&usrp2_impl::get_ref_locked, this, mb)); //////////////////////////////////////////////////////////////// // create frontend control objects @@ -578,27 +578,27 @@ usrp2_impl::usrp2_impl(const device_addr_t &_device_addr) : ); _tree->create<subdev_spec_t>(mb_path / "rx_subdev_spec") - .subscribe(boost::bind(&usrp2_impl::update_rx_subdev_spec, this, mb, _1)); + .add_coerced_subscriber(boost::bind(&usrp2_impl::update_rx_subdev_spec, this, mb, _1)); _tree->create<subdev_spec_t>(mb_path / "tx_subdev_spec") - .subscribe(boost::bind(&usrp2_impl::update_tx_subdev_spec, this, mb, _1)); + .add_coerced_subscriber(boost::bind(&usrp2_impl::update_tx_subdev_spec, this, mb, _1)); const fs_path rx_fe_path = mb_path / "rx_frontends" / "A"; const fs_path tx_fe_path = mb_path / "tx_frontends" / "A"; _tree->create<std::complex<double> >(rx_fe_path / "dc_offset" / "value") - .coerce(boost::bind(&rx_frontend_core_200::set_dc_offset, _mbc[mb].rx_fe, _1)) + .set_coercer(boost::bind(&rx_frontend_core_200::set_dc_offset, _mbc[mb].rx_fe, _1)) .set(std::complex<double>(0.0, 0.0)); _tree->create<bool>(rx_fe_path / "dc_offset" / "enable") - .subscribe(boost::bind(&rx_frontend_core_200::set_dc_offset_auto, _mbc[mb].rx_fe, _1)) + .add_coerced_subscriber(boost::bind(&rx_frontend_core_200::set_dc_offset_auto, _mbc[mb].rx_fe, _1)) .set(true); _tree->create<std::complex<double> >(rx_fe_path / "iq_balance" / "value") - .subscribe(boost::bind(&rx_frontend_core_200::set_iq_balance, _mbc[mb].rx_fe, _1)) + .add_coerced_subscriber(boost::bind(&rx_frontend_core_200::set_iq_balance, _mbc[mb].rx_fe, _1)) .set(std::complex<double>(0.0, 0.0)); _tree->create<std::complex<double> >(tx_fe_path / "dc_offset" / "value") - .coerce(boost::bind(&tx_frontend_core_200::set_dc_offset, _mbc[mb].tx_fe, _1)) + .set_coercer(boost::bind(&tx_frontend_core_200::set_dc_offset, _mbc[mb].tx_fe, _1)) .set(std::complex<double>(0.0, 0.0)); _tree->create<std::complex<double> >(tx_fe_path / "iq_balance" / "value") - .subscribe(boost::bind(&tx_frontend_core_200::set_iq_balance, _mbc[mb].tx_fe, _1)) + .add_coerced_subscriber(boost::bind(&tx_frontend_core_200::set_iq_balance, _mbc[mb].tx_fe, _1)) .set(std::complex<double>(0.0, 0.0)); //////////////////////////////////////////////////////////////// @@ -613,20 +613,20 @@ usrp2_impl::usrp2_impl(const device_addr_t &_device_addr) : for (size_t dspno = 0; dspno < _mbc[mb].rx_dsps.size(); dspno++){ _mbc[mb].rx_dsps[dspno]->set_link_rate(USRP2_LINK_RATE_BPS); _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&rx_dsp_core_200::set_tick_rate, _mbc[mb].rx_dsps[dspno], _1)); + .add_coerced_subscriber(boost::bind(&rx_dsp_core_200::set_tick_rate, _mbc[mb].rx_dsps[dspno], _1)); fs_path rx_dsp_path = mb_path / str(boost::format("rx_dsps/%u") % dspno); _tree->create<meta_range_t>(rx_dsp_path / "rate/range") - .publish(boost::bind(&rx_dsp_core_200::get_host_rates, _mbc[mb].rx_dsps[dspno])); + .set_publisher(boost::bind(&rx_dsp_core_200::get_host_rates, _mbc[mb].rx_dsps[dspno])); _tree->create<double>(rx_dsp_path / "rate/value") .set(1e6) //some default - .coerce(boost::bind(&rx_dsp_core_200::set_host_rate, _mbc[mb].rx_dsps[dspno], _1)) - .subscribe(boost::bind(&usrp2_impl::update_rx_samp_rate, this, mb, dspno, _1)); + .set_coercer(boost::bind(&rx_dsp_core_200::set_host_rate, _mbc[mb].rx_dsps[dspno], _1)) + .add_coerced_subscriber(boost::bind(&usrp2_impl::update_rx_samp_rate, this, mb, dspno, _1)); _tree->create<double>(rx_dsp_path / "freq/value") - .coerce(boost::bind(&rx_dsp_core_200::set_freq, _mbc[mb].rx_dsps[dspno], _1)); + .set_coercer(boost::bind(&rx_dsp_core_200::set_freq, _mbc[mb].rx_dsps[dspno], _1)); _tree->create<meta_range_t>(rx_dsp_path / "freq/range") - .publish(boost::bind(&rx_dsp_core_200::get_freq_range, _mbc[mb].rx_dsps[dspno])); + .set_publisher(boost::bind(&rx_dsp_core_200::get_freq_range, _mbc[mb].rx_dsps[dspno])); _tree->create<stream_cmd_t>(rx_dsp_path / "stream_cmd") - .subscribe(boost::bind(&rx_dsp_core_200::issue_stream_command, _mbc[mb].rx_dsps[dspno], _1)); + .add_coerced_subscriber(boost::bind(&rx_dsp_core_200::issue_stream_command, _mbc[mb].rx_dsps[dspno], _1)); } //////////////////////////////////////////////////////////////// @@ -637,17 +637,17 @@ usrp2_impl::usrp2_impl(const device_addr_t &_device_addr) : ); _mbc[mb].tx_dsp->set_link_rate(USRP2_LINK_RATE_BPS); _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&tx_dsp_core_200::set_tick_rate, _mbc[mb].tx_dsp, _1)); + .add_coerced_subscriber(boost::bind(&tx_dsp_core_200::set_tick_rate, _mbc[mb].tx_dsp, _1)); _tree->create<meta_range_t>(mb_path / "tx_dsps/0/rate/range") - .publish(boost::bind(&tx_dsp_core_200::get_host_rates, _mbc[mb].tx_dsp)); + .set_publisher(boost::bind(&tx_dsp_core_200::get_host_rates, _mbc[mb].tx_dsp)); _tree->create<double>(mb_path / "tx_dsps/0/rate/value") .set(1e6) //some default - .coerce(boost::bind(&tx_dsp_core_200::set_host_rate, _mbc[mb].tx_dsp, _1)) - .subscribe(boost::bind(&usrp2_impl::update_tx_samp_rate, this, mb, 0, _1)); + .set_coercer(boost::bind(&tx_dsp_core_200::set_host_rate, _mbc[mb].tx_dsp, _1)) + .add_coerced_subscriber(boost::bind(&usrp2_impl::update_tx_samp_rate, this, mb, 0, _1)); _tree->create<double>(mb_path / "tx_dsps/0/freq/value") - .coerce(boost::bind(&tx_dsp_core_200::set_freq, _mbc[mb].tx_dsp, _1)); + .set_coercer(boost::bind(&tx_dsp_core_200::set_freq, _mbc[mb].tx_dsp, _1)); _tree->create<meta_range_t>(mb_path / "tx_dsps/0/freq/range") - .publish(boost::bind(&tx_dsp_core_200::get_freq_range, _mbc[mb].tx_dsp)); + .set_publisher(boost::bind(&tx_dsp_core_200::get_freq_range, _mbc[mb].tx_dsp)); //setup dsp flow control const double ups_per_sec = device_args_i.cast<double>("ups_per_sec", 20); @@ -670,22 +670,22 @@ usrp2_impl::usrp2_impl(const device_addr_t &_device_addr) : _mbc[mb].wbiface, U2_REG_SR_ADDR(SR_TIME64), time64_rb_bases, mimo_clock_sync_delay_cycles ); _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&time64_core_200::set_tick_rate, _mbc[mb].time64, _1)); + .add_coerced_subscriber(boost::bind(&time64_core_200::set_tick_rate, _mbc[mb].time64, _1)); _tree->create<time_spec_t>(mb_path / "time/now") - .publish(boost::bind(&time64_core_200::get_time_now, _mbc[mb].time64)) - .subscribe(boost::bind(&time64_core_200::set_time_now, _mbc[mb].time64, _1)); + .set_publisher(boost::bind(&time64_core_200::get_time_now, _mbc[mb].time64)) + .add_coerced_subscriber(boost::bind(&time64_core_200::set_time_now, _mbc[mb].time64, _1)); _tree->create<time_spec_t>(mb_path / "time/pps") - .publish(boost::bind(&time64_core_200::get_time_last_pps, _mbc[mb].time64)) - .subscribe(boost::bind(&time64_core_200::set_time_next_pps, _mbc[mb].time64, _1)); + .set_publisher(boost::bind(&time64_core_200::get_time_last_pps, _mbc[mb].time64)) + .add_coerced_subscriber(boost::bind(&time64_core_200::set_time_next_pps, _mbc[mb].time64, _1)); //setup time source props _tree->create<std::string>(mb_path / "time_source/value") - .subscribe(boost::bind(&time64_core_200::set_time_source, _mbc[mb].time64, _1)) + .add_coerced_subscriber(boost::bind(&time64_core_200::set_time_source, _mbc[mb].time64, _1)) .set("none"); _tree->create<std::vector<std::string> >(mb_path / "time_source/options") - .publish(boost::bind(&time64_core_200::get_time_sources, _mbc[mb].time64)); + .set_publisher(boost::bind(&time64_core_200::get_time_sources, _mbc[mb].time64)); //setup reference source props _tree->create<std::string>(mb_path / "clock_source/value") - .subscribe(boost::bind(&usrp2_impl::update_clock_source, this, mb, _1)) + .add_coerced_subscriber(boost::bind(&usrp2_impl::update_clock_source, this, mb, _1)) .set("internal"); std::vector<std::string> clock_sources = boost::assign::list_of("internal")("external")("mimo"); if (_mbc[mb].gps and _mbc[mb].gps->gps_detected()) clock_sources.push_back("gpsdo"); @@ -697,18 +697,18 @@ usrp2_impl::usrp2_impl(const device_addr_t &_device_addr) : case usrp2_iface::USRP_N200_R4: case usrp2_iface::USRP_N210_R4: _tree->create<time_spec_t>(mb_path / "time/cmd") - .subscribe(boost::bind(&usrp2_fifo_ctrl::set_time, _mbc[mb].fifo_ctrl, _1)); + .add_coerced_subscriber(boost::bind(&usrp2_fifo_ctrl::set_time, _mbc[mb].fifo_ctrl, _1)); default: break; //otherwise, do not register } _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&usrp2_fifo_ctrl::set_tick_rate, _mbc[mb].fifo_ctrl, _1)); + .add_coerced_subscriber(boost::bind(&usrp2_fifo_ctrl::set_tick_rate, _mbc[mb].fifo_ctrl, _1)); //////////////////////////////////////////////////////////////////// // create user-defined control objects //////////////////////////////////////////////////////////////////// _mbc[mb].user = user_settings_core_200::make(_mbc[mb].wbiface, U2_REG_SR_ADDR(SR_USER_REGS)); _tree->create<user_settings_core_200::user_reg_t>(mb_path / "user/regs") - .subscribe(boost::bind(&user_settings_core_200::set_reg, _mbc[mb].user, _1)); + .add_coerced_subscriber(boost::bind(&user_settings_core_200::set_reg, _mbc[mb].user, _1)); //////////////////////////////////////////////////////////////// // create dboard control objects @@ -726,32 +726,31 @@ usrp2_impl::usrp2_impl(const device_addr_t &_device_addr) : //create the properties and register subscribers _tree->create<dboard_eeprom_t>(mb_path / "dboards/A/rx_eeprom") .set(rx_db_eeprom) - .subscribe(boost::bind(&usrp2_impl::set_db_eeprom, this, mb, "rx", _1)); + .add_coerced_subscriber(boost::bind(&usrp2_impl::set_db_eeprom, this, mb, "rx", _1)); _tree->create<dboard_eeprom_t>(mb_path / "dboards/A/tx_eeprom") .set(tx_db_eeprom) - .subscribe(boost::bind(&usrp2_impl::set_db_eeprom, this, mb, "tx", _1)); + .add_coerced_subscriber(boost::bind(&usrp2_impl::set_db_eeprom, this, mb, "tx", _1)); _tree->create<dboard_eeprom_t>(mb_path / "dboards/A/gdb_eeprom") .set(gdb_eeprom) - .subscribe(boost::bind(&usrp2_impl::set_db_eeprom, this, mb, "gdb", _1)); + .add_coerced_subscriber(boost::bind(&usrp2_impl::set_db_eeprom, this, mb, "gdb", _1)); //create a new dboard interface and manager - _mbc[mb].dboard_iface = make_usrp2_dboard_iface(_mbc[mb].wbiface, _mbc[mb].iface/*i2c*/, _mbc[mb].spiface, _mbc[mb].clock); - _tree->create<dboard_iface::sptr>(mb_path / "dboards/A/iface").set(_mbc[mb].dboard_iface); _mbc[mb].dboard_manager = dboard_manager::make( rx_db_eeprom.id, tx_db_eeprom.id, gdb_eeprom.id, - _mbc[mb].dboard_iface, _tree->subtree(mb_path / "dboards/A") + make_usrp2_dboard_iface(_mbc[mb].wbiface, _mbc[mb].iface/*i2c*/, _mbc[mb].spiface, _mbc[mb].clock), + _tree->subtree(mb_path / "dboards/A") ); //bind frontend corrections to the dboard freq props const fs_path db_tx_fe_path = mb_path / "dboards" / "A" / "tx_frontends"; BOOST_FOREACH(const std::string &name, _tree->list(db_tx_fe_path)){ _tree->access<double>(db_tx_fe_path / name / "freq" / "value") - .subscribe(boost::bind(&usrp2_impl::set_tx_fe_corrections, this, mb, _1)); + .add_coerced_subscriber(boost::bind(&usrp2_impl::set_tx_fe_corrections, this, mb, _1)); } const fs_path db_rx_fe_path = mb_path / "dboards" / "A" / "rx_frontends"; BOOST_FOREACH(const std::string &name, _tree->list(db_rx_fe_path)){ _tree->access<double>(db_rx_fe_path / name / "freq" / "value") - .subscribe(boost::bind(&usrp2_impl::set_rx_fe_corrections, this, mb, _1)); + .add_coerced_subscriber(boost::bind(&usrp2_impl::set_rx_fe_corrections, this, mb, _1)); } } diff --git a/host/lib/usrp/usrp2/usrp2_impl.hpp b/host/lib/usrp/usrp2/usrp2_impl.hpp index 07cd98b4c..47fcec657 100644 --- a/host/lib/usrp/usrp2/usrp2_impl.hpp +++ b/host/lib/usrp/usrp2/usrp2_impl.hpp @@ -102,7 +102,6 @@ private: uhd::transport::zero_copy_if::sptr tx_dsp_xport; uhd::transport::zero_copy_if::sptr fifo_ctrl_xport; uhd::usrp::dboard_manager::sptr dboard_manager; - uhd::usrp::dboard_iface::sptr dboard_iface; size_t rx_chan_occ, tx_chan_occ; mb_container_type(void): rx_chan_occ(0), tx_chan_occ(0){} }; diff --git a/host/lib/usrp/x300/CMakeLists.txt b/host/lib/usrp/x300/CMakeLists.txt index 3d6348eec..f8b129f89 100644 --- a/host/lib/usrp/x300/CMakeLists.txt +++ b/host/lib/usrp/x300/CMakeLists.txt @@ -22,8 +22,6 @@ ######################################################################## # Conditionally configure the X300 support ######################################################################## -LIBUHD_REGISTER_COMPONENT("X300" ENABLE_X300 ON "ENABLE_LIBUHD" OFF OFF) - IF(ENABLE_X300) LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/x300_impl.cpp diff --git a/host/lib/usrp/x300/x300_dboard_iface.cpp b/host/lib/usrp/x300/x300_dboard_iface.cpp index 502630109..884848624 100644 --- a/host/lib/usrp/x300/x300_dboard_iface.cpp +++ b/host/lib/usrp/x300/x300_dboard_iface.cpp @@ -45,17 +45,19 @@ public: void write_aux_dac(unit_t, aux_dac_t, double); double read_aux_adc(unit_t, aux_adc_t); - void _set_pin_ctrl(unit_t, boost::uint16_t); - void _set_atr_reg(unit_t, atr_reg_t, boost::uint16_t); - void _set_gpio_ddr(unit_t, boost::uint16_t); - void _set_gpio_out(unit_t, boost::uint16_t); + void set_pin_ctrl(unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_pin_ctrl(unit_t unit); + void set_atr_reg(unit_t unit, atr_reg_t reg, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_atr_reg(unit_t unit, atr_reg_t reg); + void set_gpio_ddr(unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_gpio_ddr(unit_t unit); + void set_gpio_out(unit_t unit, boost::uint32_t value, boost::uint32_t mask = 0xffffffff); + boost::uint32_t get_gpio_out(unit_t unit); + boost::uint32_t read_gpio(unit_t unit); void set_command_time(const uhd::time_spec_t& t); uhd::time_spec_t get_command_time(void); - void set_gpio_debug(unit_t, int); - boost::uint16_t read_gpio(unit_t); - void write_i2c(boost::uint16_t, const byte_vector_t &); byte_vector_t read_i2c(boost::uint16_t, size_t); @@ -78,6 +80,7 @@ public: boost::uint32_t data, size_t num_bits ); + void set_fe_connection(unit_t unit, const fe_connection_t& fe_conn); const x300_dboard_iface_config_t _config; uhd::dict<unit_t, ad5623_regs_t> _dac_regs; @@ -116,27 +119,6 @@ x300_dboard_iface::x300_dboard_iface(const x300_dboard_iface_config_t &config): this->set_clock_enabled(UNIT_RX, false); this->set_clock_enabled(UNIT_TX, false); - - - //some test code - /* - { - - this->write_aux_dac(UNIT_TX, AUX_DAC_A, .1); - this->write_aux_dac(UNIT_TX, AUX_DAC_B, 1); - this->write_aux_dac(UNIT_RX, AUX_DAC_A, 2); - this->write_aux_dac(UNIT_RX, AUX_DAC_B, 3); - while (1) - { - UHD_VAR(this->read_aux_adc(UNIT_TX, AUX_ADC_A)); - UHD_VAR(this->read_aux_adc(UNIT_TX, AUX_ADC_B)); - UHD_VAR(this->read_aux_adc(UNIT_RX, AUX_ADC_A)); - UHD_VAR(this->read_aux_adc(UNIT_RX, AUX_ADC_B)); - sleep(1); - } - } - */ - } x300_dboard_iface::~x300_dboard_iface(void) @@ -153,6 +135,8 @@ x300_dboard_iface::~x300_dboard_iface(void) **********************************************************************/ void x300_dboard_iface::set_clock_rate(unit_t unit, double rate) { + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); + // Just return if the requested rate is already set if (std::fabs(_clock_rates[unit] - rate) < std::numeric_limits<double>::epsilon()) return; @@ -165,17 +149,21 @@ void x300_dboard_iface::set_clock_rate(unit_t unit, double rate) case UNIT_TX: _config.clock->set_dboard_rate(_config.which_tx_clk, rate); break; + default: + UHD_THROW_INVALID_CODE_PATH(); } _clock_rates[unit] = rate; //set to shadow } double x300_dboard_iface::get_clock_rate(unit_t unit) { + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); return _clock_rates[unit]; //get from shadow } std::vector<double> x300_dboard_iface::get_clock_rates(unit_t unit) { + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); switch(unit) { case UNIT_RX: @@ -189,6 +177,7 @@ std::vector<double> x300_dboard_iface::get_clock_rates(unit_t unit) void x300_dboard_iface::set_clock_enabled(unit_t unit, bool enb) { + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); switch(unit) { case UNIT_RX: @@ -200,57 +189,74 @@ void x300_dboard_iface::set_clock_enabled(unit_t unit, bool enb) } } -double x300_dboard_iface::get_codec_rate(unit_t) +double x300_dboard_iface::get_codec_rate(unit_t unit) { + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); return _config.clock->get_master_clock_rate(); } /*********************************************************************** * GPIO **********************************************************************/ -void x300_dboard_iface::_set_pin_ctrl(unit_t unit, boost::uint16_t value) +void x300_dboard_iface::set_pin_ctrl(unit_t unit, boost::uint32_t value, boost::uint32_t mask) { - return _config.gpio->set_pin_ctrl(unit, value); + _config.gpio->set_pin_ctrl(unit, value, mask); } -void x300_dboard_iface::_set_gpio_ddr(unit_t unit, boost::uint16_t value) +boost::uint32_t x300_dboard_iface::get_pin_ctrl(unit_t unit) { - return _config.gpio->set_gpio_ddr(unit, value); + return _config.gpio->get_pin_ctrl(unit); } -void x300_dboard_iface::_set_gpio_out(unit_t unit, boost::uint16_t value) +void x300_dboard_iface::set_atr_reg(unit_t unit, atr_reg_t reg, boost::uint32_t value, boost::uint32_t mask) { - return _config.gpio->set_gpio_out(unit, value); + _config.gpio->set_atr_reg(unit, reg, value, mask); } -boost::uint16_t x300_dboard_iface::read_gpio(unit_t unit) +boost::uint32_t x300_dboard_iface::get_atr_reg(unit_t unit, atr_reg_t reg) { - return _config.gpio->read_gpio(unit); + return _config.gpio->get_atr_reg(unit, reg); } -void x300_dboard_iface::_set_atr_reg(unit_t unit, atr_reg_t atr, boost::uint16_t value) +void x300_dboard_iface::set_gpio_ddr(unit_t unit, boost::uint32_t value, boost::uint32_t mask) { - return _config.gpio->set_atr_reg(unit, atr, value); + _config.gpio->set_gpio_ddr(unit, value, mask); } -void x300_dboard_iface::set_gpio_debug(unit_t, int) +boost::uint32_t x300_dboard_iface::get_gpio_ddr(unit_t unit) { - throw uhd::not_implemented_error("no set_gpio_debug implemented"); + return _config.gpio->get_gpio_ddr(unit); +} + +void x300_dboard_iface::set_gpio_out(unit_t unit, boost::uint32_t value, boost::uint32_t mask) +{ + _config.gpio->set_gpio_out(unit, value, mask); +} + +boost::uint32_t x300_dboard_iface::get_gpio_out(unit_t unit) +{ + return _config.gpio->get_gpio_out(unit); +} + +boost::uint32_t x300_dboard_iface::read_gpio(unit_t unit) +{ + return _config.gpio->read_gpio(unit); } /*********************************************************************** * SPI **********************************************************************/ -#define toslaveno(unit) \ - (((unit) == dboard_iface::UNIT_TX)? _config.tx_spi_slaveno : _config.rx_spi_slaveno) - void x300_dboard_iface::write_spi( unit_t unit, const spi_config_t &config, boost::uint32_t data, size_t num_bits ){ - _config.spi->write_spi(toslaveno(unit), config, data, num_bits); + boost::uint32_t slave = 0; + if (unit == UNIT_TX) slave |= _config.tx_spi_slaveno; + if (unit == UNIT_RX) slave |= _config.rx_spi_slaveno; + + _config.spi->write_spi(int(slave), config, data, num_bits); } boost::uint32_t x300_dboard_iface::read_write_spi( @@ -259,7 +265,10 @@ boost::uint32_t x300_dboard_iface::read_write_spi( boost::uint32_t data, size_t num_bits ){ - return _config.spi->read_spi(toslaveno(unit), config, data, num_bits); + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); + return _config.spi->read_spi( + (unit==dboard_iface::UNIT_TX)?_config.tx_spi_slaveno:_config.rx_spi_slaveno, + config, data, num_bits); } /*********************************************************************** @@ -284,6 +293,7 @@ void x300_dboard_iface::_write_aux_dac(unit_t unit) (UNIT_RX, DB_RX_LSDAC_SEN) (UNIT_TX, DB_TX_LSDAC_SEN) ; + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); _config.spi->write_spi( unit_to_spi_dac[unit], spi_config_t::EDGE_FALL, _dac_regs[unit].get_reg(), 24 @@ -292,6 +302,8 @@ void x300_dboard_iface::_write_aux_dac(unit_t unit) void x300_dboard_iface::write_aux_dac(unit_t unit, aux_dac_t which, double value) { + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); + _dac_regs[unit].data = boost::math::iround(4095*value/3.3); _dac_regs[unit].cmd = ad5623_regs_t::CMD_WR_UP_DAC_CHAN_N; @@ -321,6 +333,8 @@ double x300_dboard_iface::read_aux_adc(unit_t unit, aux_adc_t which) (UNIT_TX, DB_TX_LSADC_SEN) ; + if (unit == UNIT_BOTH) throw uhd::runtime_error("UNIT_BOTH not supported."); + //setup spi config args spi_config_t config; config.mosi_edge = spi_config_t::EDGE_FALL; @@ -356,3 +370,12 @@ void x300_dboard_iface::set_command_time(const uhd::time_spec_t& t) { _config.cmd_time_ctrl->set_time(t); } + +void x300_dboard_iface::set_fe_connection(unit_t unit, const fe_connection_t& fe_conn) +{ + if (unit == UNIT_RX) { + _config.rx_dsp->set_mux(fe_conn); + } else { + throw uhd::not_implemented_error("frontend connection not configurable for TX"); + } +} diff --git a/host/lib/usrp/x300/x300_fw_common.h b/host/lib/usrp/x300/x300_fw_common.h index 549fc9dfa..6039ee376 100644 --- a/host/lib/usrp/x300/x300_fw_common.h +++ b/host/lib/usrp/x300/x300_fw_common.h @@ -33,7 +33,7 @@ extern "C" { #define X300_REVISION_MIN 2 #define X300_FW_COMPAT_MAJOR 4 #define X300_FW_COMPAT_MINOR 0 -#define X300_FPGA_COMPAT_MAJOR 19 +#define X300_FPGA_COMPAT_MAJOR 20 //shared memory sections - in between the stack and the program space #define X300_FW_SHMEM_BASE 0x6000 diff --git a/host/lib/usrp/x300/x300_impl.cpp b/host/lib/usrp/x300/x300_impl.cpp index c13c2ac07..b9d4e56b1 100644 --- a/host/lib/usrp/x300/x300_impl.cpp +++ b/host/lib/usrp/x300/x300_impl.cpp @@ -47,23 +47,38 @@ using namespace uhd; using namespace uhd::usrp; using namespace uhd::transport; using namespace uhd::niusrprio; +using namespace uhd::usrp::gpio_atr; using namespace uhd::usrp::x300; namespace asio = boost::asio; -/*********************************************************************** - * Discovery over the udp and pcie transport - **********************************************************************/ +static bool has_dram_buff(wb_iface::sptr zpu_ctrl) { + bool dramR0 = dma_fifo_core_3000::check( + zpu_ctrl, SR_ADDR(SET0_BASE, ZPU_SR_DRAM_FIFO0), SR_ADDR(SET0_BASE, ZPU_RB_DRAM_FIFO0)); + bool dramR1 = dma_fifo_core_3000::check( + zpu_ctrl, SR_ADDR(SET0_BASE, ZPU_SR_DRAM_FIFO1), SR_ADDR(SET0_BASE, ZPU_RB_DRAM_FIFO1)); + return (dramR0 and dramR1); +} + static std::string get_fpga_option(wb_iface::sptr zpu_ctrl) { - //1G = {0:1G, 1:1G} w/ DRAM, HG = {0:1G, 1:10G} w/ DRAM, XG = {0:10G, 1:10G} w/ DRAM - //HGS = {0:1G, 1:10G} w/ SRAM, XGS = {0:10G, 1:10G} w/ SRAM + //Possible options: + //1G = {0:1G, 1:1G} w/ DRAM, HG = {0:1G, 1:10G} w/ DRAM, XG = {0:10G, 1:10G} w/ DRAM + //1GS = {0:1G, 1:1G} w/ SRAM, HGS = {0:1G, 1:10G} w/ SRAM, XGS = {0:10G, 1:10G} w/ SRAM - //In the default configuration, UHD does not support the HG and XG images so - //they are never autodetected. + std::string option; bool eth0XG = (zpu_ctrl->peek32(SR_ADDR(SET0_BASE, ZPU_RB_ETH_TYPE0)) == 0x1); bool eth1XG = (zpu_ctrl->peek32(SR_ADDR(SET0_BASE, ZPU_RB_ETH_TYPE1)) == 0x1); - return (eth0XG && eth1XG) ? "XGS" : (eth1XG ? "HGS" : "1G"); + option = (eth0XG && eth1XG) ? "XG" : (eth1XG ? "HG" : "1G"); + + if (not has_dram_buff(zpu_ctrl)) { + option += "S"; + } + return option; } +/*********************************************************************** + * Discovery over the udp and pcie transport + **********************************************************************/ + //@TODO: Refactor the find functions to collapse common code for ethernet and PCIe static device_addrs_t x300_find_with_addr(const device_addr_t &hint) { @@ -348,6 +363,8 @@ static void x300_load_fw(wb_iface::sptr fw_reg_ctrl, const std::string &file_nam if ((i & 0x1fff) == 0) UHD_MSG(status) << "." << std::flush; } + //Wait for fimrware to reboot. 3s is an upper bound + boost::this_thread::sleep(boost::posix_time::milliseconds(3000)); UHD_MSG(status) << " done!" << std::endl; } @@ -561,7 +578,7 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) const mboard_eeprom_t mb_eeprom(*eeprom16, "X300"); _tree->create<mboard_eeprom_t>(mb_path / "eeprom") .set(mb_eeprom) - .subscribe(boost::bind(&x300_impl::set_mb_eeprom, this, mb.zpu_i2c, _1)); + .add_coerced_subscriber(boost::bind(&x300_impl::set_mb_eeprom, this, mb.zpu_i2c, _1)); bool recover_mb_eeprom = dev_addr.has_key("recover_mb_eeprom"); if (recover_mb_eeprom) { @@ -684,7 +701,7 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) // create clock properties //////////////////////////////////////////////////////////////////// _tree->create<double>(mb_path / "tick_rate") - .publish(boost::bind(&x300_clock_ctrl::get_master_clock_rate, mb.clock)); + .set_publisher(boost::bind(&x300_clock_ctrl::get_master_clock_rate, mb.clock)); _tree->create<time_spec_t>(mb_path / "time" / "cmd"); @@ -713,7 +730,7 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) BOOST_FOREACH(const std::string &name, mb.gps->get_sensors()) { _tree->create<sensor_value_t>(mb_path / "sensors" / name) - .publish(boost::bind(&gps_ctrl::get_sensor, mb.gps, name)); + .set_publisher(boost::bind(&gps_ctrl::get_sensor, mb.gps, name)); } } else @@ -730,6 +747,36 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) } //////////////////////////////////////////////////////////////////// + // DRAM FIFO initialization + //////////////////////////////////////////////////////////////////// + mb.has_dram_buff = has_dram_buff(mb.zpu_ctrl); + if (mb.has_dram_buff) { + for (size_t i = 0; i < mboard_members_t::NUM_RADIOS; i++) { + static const size_t NUM_REGS = 8; + mb.dram_buff_ctrl[i] = dma_fifo_core_3000::make( + mb.zpu_ctrl, + SR_ADDR(SET0_BASE, ZPU_SR_DRAM_FIFO0+(i*NUM_REGS)), + SR_ADDR(SET0_BASE, ZPU_RB_DRAM_FIFO0+i)); + mb.dram_buff_ctrl[i]->resize(X300_DRAM_FIFO_SIZE * i, X300_DRAM_FIFO_SIZE); + + if (mb.dram_buff_ctrl[i]->ext_bist_supported()) { + UHD_MSG(status) << boost::format("Running BIST for DRAM FIFO %d... ") % i; + boost::uint32_t bisterr = mb.dram_buff_ctrl[i]->run_bist(); + if (bisterr != 0) { + throw uhd::runtime_error(str(boost::format("DRAM FIFO BIST failed! (code: %d)\n") % bisterr)); + } else { + double throughput = mb.dram_buff_ctrl[i]->get_bist_throughput(X300_BUS_CLOCK_RATE); + UHD_MSG(status) << (boost::format("pass (Throughput: %.1fMB/s)") % (throughput/1e6)) << std::endl; + } + } else { + if (mb.dram_buff_ctrl[i]->run_bist() != 0) { + throw uhd::runtime_error(str(boost::format("DRAM FIFO %d BIST failed!\n") % i)); + } + } + } + } + + //////////////////////////////////////////////////////////////////// // setup radios //////////////////////////////////////////////////////////////////// this->setup_radio(mb_i, "A", dev_addr); @@ -750,40 +797,40 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) //////////////////////////////////////////////////////////////////// // front panel gpio //////////////////////////////////////////////////////////////////// - mb.fp_gpio = gpio_core_200::make(mb.radio_perifs[0].ctrl, radio::sr_addr(radio::FP_GPIO), radio::RB32_FP_GPIO); + mb.fp_gpio = gpio_atr_3000::make(mb.radio_perifs[0].ctrl, radio::sr_addr(radio::FP_GPIO), radio::RB32_FP_GPIO); BOOST_FOREACH(const gpio_attr_map_t::value_type attr, gpio_attr_map) { _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / attr.second) .set(0) - .subscribe(boost::bind(&x300_impl::set_fp_gpio, this, mb.fp_gpio, attr.first, _1)); + .add_coerced_subscriber(boost::bind(&gpio_atr_3000::set_gpio_attr, mb.fp_gpio, attr.first, _1)); } _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / "READBACK") - .publish(boost::bind(&x300_impl::get_fp_gpio, this, mb.fp_gpio)); + .set_publisher(boost::bind(&gpio_atr_3000::read_gpio, mb.fp_gpio)); //////////////////////////////////////////////////////////////////// // register the time keepers - only one can be the highlander //////////////////////////////////////////////////////////////////// _tree->create<time_spec_t>(mb_path / "time" / "now") - .publish(boost::bind(&time_core_3000::get_time_now, mb.radio_perifs[0].time64)) - .subscribe(boost::bind(&x300_impl::sync_times, this, mb, _1)) + .set_publisher(boost::bind(&time_core_3000::get_time_now, mb.radio_perifs[0].time64)) + .add_coerced_subscriber(boost::bind(&x300_impl::sync_times, this, mb, _1)) .set(0.0); _tree->create<time_spec_t>(mb_path / "time" / "pps") - .publish(boost::bind(&time_core_3000::get_time_last_pps, mb.radio_perifs[0].time64)) - .subscribe(boost::bind(&time_core_3000::set_time_next_pps, mb.radio_perifs[0].time64, _1)) - .subscribe(boost::bind(&time_core_3000::set_time_next_pps, mb.radio_perifs[1].time64, _1)); + .set_publisher(boost::bind(&time_core_3000::get_time_last_pps, mb.radio_perifs[0].time64)) + .add_coerced_subscriber(boost::bind(&time_core_3000::set_time_next_pps, mb.radio_perifs[0].time64, _1)) + .add_coerced_subscriber(boost::bind(&time_core_3000::set_time_next_pps, mb.radio_perifs[1].time64, _1)); //////////////////////////////////////////////////////////////////// // setup time sources and properties //////////////////////////////////////////////////////////////////// _tree->create<std::string>(mb_path / "time_source" / "value") .set("internal") - .subscribe(boost::bind(&x300_impl::update_time_source, this, boost::ref(mb), _1)); + .add_coerced_subscriber(boost::bind(&x300_impl::update_time_source, this, boost::ref(mb), _1)); static const std::vector<std::string> time_sources = boost::assign::list_of("internal")("external")("gpsdo"); _tree->create<std::vector<std::string> >(mb_path / "time_source" / "options").set(time_sources); //setup the time output, default to ON _tree->create<bool>(mb_path / "time_source" / "output") - .subscribe(boost::bind(&x300_impl::set_time_source_out, this, boost::ref(mb), _1)) + .add_coerced_subscriber(boost::bind(&x300_impl::set_time_source_out, this, boost::ref(mb), _1)) .set(true); //////////////////////////////////////////////////////////////////// @@ -791,7 +838,7 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) //////////////////////////////////////////////////////////////////// _tree->create<std::string>(mb_path / "clock_source" / "value") .set("internal") - .subscribe(boost::bind(&x300_impl::update_clock_source, this, boost::ref(mb), _1)); + .add_coerced_subscriber(boost::bind(&x300_impl::update_clock_source, this, boost::ref(mb), _1)); static const std::vector<std::string> clock_source_options = boost::assign::list_of("internal")("external")("gpsdo"); _tree->create<std::vector<std::string> >(mb_path / "clock_source" / "options").set(clock_source_options); @@ -807,12 +854,12 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) //setup the clock output, default to ON _tree->create<bool>(mb_path / "clock_source" / "output") - .subscribe(boost::bind(&x300_clock_ctrl::set_ref_out, mb.clock, _1)); + .add_coerced_subscriber(boost::bind(&x300_clock_ctrl::set_ref_out, mb.clock, _1)); //initialize tick rate (must be done before setting time) _tree->access<double>(mb_path / "tick_rate") - .subscribe(boost::bind(&x300_impl::set_tick_rate, this, boost::ref(mb), _1)) - .subscribe(boost::bind(&x300_impl::update_tick_rate, this, boost::ref(mb), _1)) + .add_coerced_subscriber(boost::bind(&x300_impl::set_tick_rate, this, boost::ref(mb), _1)) + .add_coerced_subscriber(boost::bind(&x300_impl::update_tick_rate, this, boost::ref(mb), _1)) .set(mb.clock->get_master_clock_rate()); //////////////////////////////////////////////////////////////////// @@ -822,15 +869,15 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) _tree->create<std::vector<size_t> >(mb_path / "rx_chan_dsp_mapping").set(default_map); _tree->create<std::vector<size_t> >(mb_path / "tx_chan_dsp_mapping").set(default_map); _tree->create<subdev_spec_t>(mb_path / "rx_subdev_spec") - .subscribe(boost::bind(&x300_impl::update_subdev_spec, this, "rx", mb_i, _1)); + .add_coerced_subscriber(boost::bind(&x300_impl::update_subdev_spec, this, "rx", mb_i, _1)); _tree->create<subdev_spec_t>(mb_path / "tx_subdev_spec") - .subscribe(boost::bind(&x300_impl::update_subdev_spec, this, "tx", mb_i, _1)); + .add_coerced_subscriber(boost::bind(&x300_impl::update_subdev_spec, this, "tx", mb_i, _1)); //////////////////////////////////////////////////////////////////// // and do the misc mboard sensors //////////////////////////////////////////////////////////////////// _tree->create<sensor_value_t>(mb_path / "sensors" / "ref_locked") - .publish(boost::bind(&x300_impl::get_ref_locked, this, mb)); + .set_publisher(boost::bind(&x300_impl::get_ref_locked, this, mb)); //////////////////////////////////////////////////////////////////// // do some post-init tasks @@ -931,7 +978,8 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name, con perif.spi = spi_core_3000::make(perif.ctrl, radio::sr_addr(radio::SPI), radio::RB32_SPI); perif.adc = x300_adc_ctrl::make(perif.spi, DB_ADC_SEN); perif.dac = x300_dac_ctrl::make(perif.spi, DB_DAC_SEN, mb.clock->get_master_clock_rate()); - perif.leds = gpio_core_200_32wo::make(perif.ctrl, radio::sr_addr(radio::LEDS)); + perif.leds = gpio_atr_3000::make_write_only(perif.ctrl, radio::sr_addr(radio::LEDS)); + perif.leds->set_atr_mode(MODE_ATR, 0xFFFFFFFF); perif.rx_fe = rx_frontend_core_200::make(perif.ctrl, radio::sr_addr(radio::RX_FRONT)); perif.rx_fe->set_dc_offset(rx_frontend_core_200::DEFAULT_DC_OFFSET_VALUE); perif.rx_fe->set_dc_offset_auto(rx_frontend_core_200::DEFAULT_DC_OFFSET_ENABLE); @@ -941,9 +989,14 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name, con perif.framer = rx_vita_core_3000::make(perif.ctrl, radio::sr_addr(radio::RX_CTRL)); perif.ddc = rx_dsp_core_3000::make(perif.ctrl, radio::sr_addr(radio::RX_DSP)); perif.ddc->set_link_rate(10e9/8); //whatever - perif.deframer = tx_vita_core_3000::make(perif.ctrl, radio::sr_addr(radio::TX_CTRL)); + perif.ddc->set_tick_rate(mb.clock->get_master_clock_rate()); + //The DRAM FIFO is treated as in internal radio FIFO for flow control purposes + tx_vita_core_3000::fc_monitor_loc fc_loc = + mb.has_dram_buff ? tx_vita_core_3000::FC_PRE_FIFO : tx_vita_core_3000::FC_PRE_RADIO; + perif.deframer = tx_vita_core_3000::make(perif.ctrl, radio::sr_addr(radio::TX_CTRL), fc_loc); perif.duc = tx_dsp_core_3000::make(perif.ctrl, radio::sr_addr(radio::TX_DSP)); perif.duc->set_link_rate(10e9/8); //whatever + perif.duc->set_tick_rate(mb.clock->get_master_clock_rate()); //////////////////////////////////////////////////////////////////// // create time control objects @@ -958,7 +1011,7 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name, con self_cal_adc_capture_delay(mb, radio_index, dev_addr.has_key("self_cal_adc_delay")); _tree->access<time_spec_t>(mb_path / "time" / "cmd") - .subscribe(boost::bind(&radio_ctrl_core_3000::set_time, perif.ctrl, _1)); + .add_coerced_subscriber(boost::bind(&radio_ctrl_core_3000::set_time, perif.ctrl, _1)); //////////////////////////////////////////////////////////////// // create codec control objects @@ -970,7 +1023,7 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name, con _tree->create<meta_range_t>(mb_path / "rx_codecs" / slot_name / "gains" / "digital" / "range").set(meta_range_t(0, 6.0, 0.5)); _tree->create<double>(mb_path / "rx_codecs" / slot_name / "gains" / "digital" / "value") - .subscribe(boost::bind(&x300_adc_ctrl::set_gain, perif.adc, _1)).set(0); + .add_coerced_subscriber(boost::bind(&x300_adc_ctrl::set_gain, perif.adc, _1)).set(0); //////////////////////////////////////////////////////////////////// // front end corrections @@ -984,10 +1037,10 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name, con const fs_path rx_dsp_path = mb_path / "rx_dsps" / str(boost::format("%u") % radio_index); perif.ddc->populate_subtree(_tree->subtree(rx_dsp_path)); _tree->access<double>(rx_dsp_path / "rate" / "value") - .subscribe(boost::bind(&x300_impl::update_rx_samp_rate, this, boost::ref(mb), radio_index, _1)) + .add_coerced_subscriber(boost::bind(&x300_impl::update_rx_samp_rate, this, boost::ref(mb), radio_index, _1)) ; _tree->create<stream_cmd_t>(rx_dsp_path / "stream_cmd") - .subscribe(boost::bind(&rx_vita_core_3000::issue_stream_command, perif.framer, _1)); + .add_coerced_subscriber(boost::bind(&rx_vita_core_3000::issue_stream_command, perif.framer, _1)); //////////////////////////////////////////////////////////////////// // connect tx dsp control objects @@ -995,7 +1048,7 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name, con const fs_path tx_dsp_path = mb_path / "tx_dsps" / str(boost::format("%u") % radio_index); perif.duc->populate_subtree(_tree->subtree(tx_dsp_path)); _tree->access<double>(tx_dsp_path / "rate" / "value") - .subscribe(boost::bind(&x300_impl::update_tx_samp_rate, this, boost::ref(mb), radio_index, _1)) + .add_coerced_subscriber(boost::bind(&x300_impl::update_tx_samp_rate, this, boost::ref(mb), radio_index, _1)) ; //////////////////////////////////////////////////////////////////// @@ -1005,54 +1058,53 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name, con const size_t j = (slot_name == "B")? 0x2 : 0x0; _tree->create<dboard_eeprom_t>(db_path / "rx_eeprom") .set(mb.db_eeproms[X300_DB0_RX_EEPROM | j]) - .subscribe(boost::bind(&x300_impl::set_db_eeprom, this, mb.zpu_i2c, (0x50 | X300_DB0_RX_EEPROM | j), _1)); + .add_coerced_subscriber(boost::bind(&x300_impl::set_db_eeprom, this, mb.zpu_i2c, (0x50 | X300_DB0_RX_EEPROM | j), _1)); _tree->create<dboard_eeprom_t>(db_path / "tx_eeprom") .set(mb.db_eeproms[X300_DB0_TX_EEPROM | j]) - .subscribe(boost::bind(&x300_impl::set_db_eeprom, this, mb.zpu_i2c, (0x50 | X300_DB0_TX_EEPROM | j), _1)); + .add_coerced_subscriber(boost::bind(&x300_impl::set_db_eeprom, this, mb.zpu_i2c, (0x50 | X300_DB0_TX_EEPROM | j), _1)); _tree->create<dboard_eeprom_t>(db_path / "gdb_eeprom") .set(mb.db_eeproms[X300_DB0_GDB_EEPROM | j]) - .subscribe(boost::bind(&x300_impl::set_db_eeprom, this, mb.zpu_i2c, (0x50 | X300_DB0_GDB_EEPROM | j), _1)); + .add_coerced_subscriber(boost::bind(&x300_impl::set_db_eeprom, this, mb.zpu_i2c, (0x50 | X300_DB0_GDB_EEPROM | j), _1)); //create a new dboard interface x300_dboard_iface_config_t db_config; - db_config.gpio = gpio_core_200::make(perif.ctrl, radio::sr_addr(radio::GPIO), radio::RB32_GPIO); + db_config.gpio = db_gpio_atr_3000::make(perif.ctrl, radio::sr_addr(radio::GPIO), radio::RB32_GPIO); db_config.spi = perif.spi; db_config.rx_spi_slaveno = DB_RX_SEN; db_config.tx_spi_slaveno = DB_TX_SEN; db_config.i2c = mb.zpu_i2c; db_config.clock = mb.clock; + db_config.rx_dsp = mb.radio_perifs[radio_index].ddc; db_config.which_rx_clk = (slot_name == "A")? X300_CLOCK_WHICH_DB0_RX : X300_CLOCK_WHICH_DB1_RX; db_config.which_tx_clk = (slot_name == "A")? X300_CLOCK_WHICH_DB0_TX : X300_CLOCK_WHICH_DB1_TX; db_config.dboard_slot = (slot_name == "A")? 0 : 1; db_config.cmd_time_ctrl = perif.ctrl; - _dboard_ifaces[db_path] = x300_make_dboard_iface(db_config); //create a new dboard manager - _tree->create<dboard_iface::sptr>(db_path / "iface").set(_dboard_ifaces[db_path]); _dboard_managers[db_path] = dboard_manager::make( mb.db_eeproms[X300_DB0_RX_EEPROM | j].id, mb.db_eeproms[X300_DB0_TX_EEPROM | j].id, mb.db_eeproms[X300_DB0_GDB_EEPROM | j].id, - _dboard_ifaces[db_path], + x300_make_dboard_iface(db_config), _tree->subtree(db_path) ); //now that dboard is created -- register into rx antenna event const std::string fe_name = _tree->list(db_path / "rx_frontends").front(); _tree->access<std::string>(db_path / "rx_frontends" / fe_name / "antenna" / "value") - .subscribe(boost::bind(&x300_impl::update_atr_leds, this, mb.radio_perifs[radio_index].leds, _1)); + .add_coerced_subscriber(boost::bind(&x300_impl::update_atr_leds, this, mb.radio_perifs[radio_index].leds, _1)); this->update_atr_leds(mb.radio_perifs[radio_index].leds, ""); //init anyway, even if never called //bind frontend corrections to the dboard freq props const fs_path db_tx_fe_path = db_path / "tx_frontends"; BOOST_FOREACH(const std::string &name, _tree->list(db_tx_fe_path)) { _tree->access<double>(db_tx_fe_path / name / "freq" / "value") - .subscribe(boost::bind(&x300_impl::set_tx_fe_corrections, this, mb_path, slot_name, _1)); + .add_coerced_subscriber(boost::bind(&x300_impl::set_tx_fe_corrections, this, mb_path, slot_name, _1)); } const fs_path db_rx_fe_path = db_path / "rx_frontends"; BOOST_FOREACH(const std::string &name, _tree->list(db_rx_fe_path)) { _tree->access<double>(db_rx_fe_path / name / "freq" / "value") - .subscribe(boost::bind(&x300_impl::set_rx_fe_corrections, this, mb_path, slot_name, _1)); + .add_coerced_subscriber(boost::bind(&x300_impl::set_rx_fe_corrections, this, mb_path, slot_name, _1)); } } @@ -1144,7 +1196,7 @@ x300_impl::both_xports_t x300_impl::make_transport( * connection type.*/ size_t eth_data_rec_frame_size = 0; - if (mb.loaded_fpga_image == "HGS") { + if (mb.loaded_fpga_image.substr(0,2) == "HG") { if (mb.router_dst_here == X300_XB_DST_E0) { eth_data_rec_frame_size = X300_1GE_DATA_FRAME_MAX_SIZE; _tree->access<double>("/mboards/"+boost::lexical_cast<std::string>(mb_index) / "link_max_rate").set(X300_MAX_RATE_1GIGE); @@ -1152,7 +1204,7 @@ x300_impl::both_xports_t x300_impl::make_transport( eth_data_rec_frame_size = X300_10GE_DATA_FRAME_MAX_SIZE; _tree->access<double>("/mboards/"+boost::lexical_cast<std::string>(mb_index) / "link_max_rate").set(X300_MAX_RATE_10GIGE); } - } else if (mb.loaded_fpga_image == "XGS") { + } else if (mb.loaded_fpga_image.substr(0,2) == "XG") { eth_data_rec_frame_size = X300_10GE_DATA_FRAME_MAX_SIZE; _tree->access<double>("/mboards/"+boost::lexical_cast<std::string>(mb_index) / "link_max_rate").set(X300_MAX_RATE_10GIGE); } @@ -1296,16 +1348,16 @@ boost::uint32_t x300_impl::allocate_sid(mboard_members_t &mb, const sid_config_t return sid; } -void x300_impl::update_atr_leds(gpio_core_200_32wo::sptr leds, const std::string &rx_ant) +void x300_impl::update_atr_leds(gpio_atr_3000::sptr leds, const std::string &rx_ant) { const bool is_txrx = (rx_ant == "TX/RX"); const int rx_led = (1 << 2); const int tx_led = (1 << 1); const int txrx_led = (1 << 0); - leds->set_atr_reg(dboard_iface::ATR_REG_IDLE, 0); - leds->set_atr_reg(dboard_iface::ATR_REG_RX_ONLY, is_txrx? txrx_led : rx_led); - leds->set_atr_reg(dboard_iface::ATR_REG_TX_ONLY, tx_led); - leds->set_atr_reg(dboard_iface::ATR_REG_FULL_DUPLEX, rx_led | tx_led); + leds->set_atr_reg(ATR_REG_IDLE, 0); + leds->set_atr_reg(ATR_REG_RX_ONLY, is_txrx? txrx_led : rx_led); + leds->set_atr_reg(ATR_REG_TX_ONLY, tx_led); + leds->set_atr_reg(ATR_REG_FULL_DUPLEX, rx_led | tx_led); } void x300_impl::set_tick_rate(mboard_members_t &mb, const double rate) @@ -1315,7 +1367,6 @@ void x300_impl::set_tick_rate(mboard_members_t &mb, const double rate) perif.time64->set_tick_rate(rate); perif.framer->set_tick_rate(rate); perif.ddc->set_tick_rate(rate); - perif.deframer->set_tick_rate(rate); perif.duc->set_tick_rate(rate); } } @@ -1518,30 +1569,6 @@ void x300_impl::set_mb_eeprom(i2c_iface::sptr i2c, const mboard_eeprom_t &mb_eep } /*********************************************************************** - * front-panel GPIO - **********************************************************************/ - -boost::uint32_t x300_impl::get_fp_gpio(gpio_core_200::sptr gpio) -{ - return boost::uint32_t(gpio->read_gpio(dboard_iface::UNIT_RX)); -} - -void x300_impl::set_fp_gpio(gpio_core_200::sptr gpio, const gpio_attr_t attr, const boost::uint32_t value) -{ - switch (attr) - { - case GPIO_CTRL: return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value); - case GPIO_DDR: return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value); - case GPIO_OUT: return gpio->set_gpio_out(dboard_iface::UNIT_RX, value); - case GPIO_ATR_0X: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value); - case GPIO_ATR_RX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value); - case GPIO_ATR_TX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value); - case GPIO_ATR_XX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value); - default: UHD_THROW_INVALID_CODE_PATH(); - } -} - -/*********************************************************************** * claimer logic **********************************************************************/ diff --git a/host/lib/usrp/x300/x300_impl.hpp b/host/lib/usrp/x300/x300_impl.hpp index e04b06d65..dd94708b7 100644 --- a/host/lib/usrp/x300/x300_impl.hpp +++ b/host/lib/usrp/x300/x300_impl.hpp @@ -41,7 +41,8 @@ #include "radio_ctrl_core_3000.hpp" #include "rx_frontend_core_200.hpp" #include "tx_frontend_core_200.hpp" -#include "gpio_core_200.hpp" +#include "gpio_atr_3000.hpp" +#include "dma_fifo_core_3000.hpp" #include <boost/weak_ptr.hpp> #include <uhd/usrp/gps_ctrl.hpp> #include <uhd/usrp/mboard_eeprom.hpp> @@ -57,8 +58,11 @@ static const double X300_DEFAULT_TICK_RATE = 200e6; //Hz static const double X300_DEFAULT_DBOARD_CLK_RATE = 50e6; //Hz static const double X300_BUS_CLOCK_RATE = 166.666667e6; //Hz -static const size_t X300_TX_HW_BUFF_SIZE = 520*1024; //512K SRAM buffer + 8K 2Clk FIFO -static const size_t X300_TX_FC_RESPONSE_FREQ = 8; //per flow-control window +static const size_t X300_TX_HW_BUFF_SIZE_SRAM = 520*1024; //512K SRAM buffer + 8K 2Clk FIFO +static const size_t X300_TX_FC_RESPONSE_FREQ_SRAM = 8; //per flow-control window +static const size_t X300_TX_HW_BUFF_SIZE_DRAM = 128*1024; +static const size_t X300_TX_FC_RESPONSE_FREQ_DRAM = 32; +static const boost::uint32_t X300_DRAM_FIFO_SIZE = 32*1024*1024; static const size_t X300_RX_SW_BUFF_SIZE_ETH = 0x2000000;//32MiB For an ~8k frame size any size >32MiB is just wasted buffer space static const size_t X300_RX_SW_BUFF_SIZE_ETH_MACOS = 0x100000; //1Mib @@ -124,12 +128,13 @@ enum struct x300_dboard_iface_config_t { - gpio_core_200::sptr gpio; + uhd::usrp::gpio_atr::db_gpio_atr_3000::sptr gpio; spi_core_3000::sptr spi; size_t rx_spi_slaveno; size_t tx_spi_slaveno; i2c_core_100_wb32::sptr i2c; x300_clock_ctrl::sptr clock; + rx_dsp_core_3000::sptr rx_dsp; x300_clock_which_t which_rx_clk; x300_clock_which_t which_tx_clk; boost::uint8_t dboard_slot; @@ -186,7 +191,7 @@ private: rx_dsp_core_3000::sptr ddc; tx_vita_core_3000::sptr deframer; tx_dsp_core_3000::sptr duc; - gpio_core_200_32wo::sptr leds; + uhd::usrp::gpio_atr::gpio_atr_3000::sptr leds; rx_frontend_core_200::sptr rx_fe; tx_frontend_core_200::sptr tx_fe; //Registers @@ -227,10 +232,14 @@ private: return slot_name == "A" ? 0 : 1; } + bool has_dram_buff; + dma_fifo_core_3000::sptr dram_buff_ctrl[NUM_RADIOS]; + + //other perifs on mboard x300_clock_ctrl::sptr clock; uhd::gps_ctrl::sptr gps; - gpio_core_200::sptr fp_gpio; + uhd::usrp::gpio_atr::gpio_atr_3000::sptr fp_gpio; uhd::usrp::x300::fw_regmap_t::sptr fw_regmap; @@ -328,7 +337,6 @@ private: //////////////////////////////////////////////////////////////////// uhd::dict<std::string, uhd::usrp::dboard_manager::sptr> _dboard_managers; - uhd::dict<std::string, uhd::usrp::dboard_iface::sptr> _dboard_ifaces; void set_rx_fe_corrections(const uhd::fs_path &mb_path, const std::string &fe_name, const double lo_freq); void set_tx_fe_corrections(const uhd::fs_path &mb_path, const std::string &fe_name, const double lo_freq); @@ -367,9 +375,7 @@ private: void check_fw_compat(const uhd::fs_path &mb_path, uhd::wb_iface::sptr iface); void check_fpga_compat(const uhd::fs_path &mb_path, const mboard_members_t &members); - void update_atr_leds(gpio_core_200_32wo::sptr, const std::string &ant); - boost::uint32_t get_fp_gpio(gpio_core_200::sptr); - void set_fp_gpio(gpio_core_200::sptr, const gpio_attr_t, const boost::uint32_t); + void update_atr_leds(uhd::usrp::gpio_atr::gpio_atr_3000::sptr, const std::string &ant); void self_cal_adc_capture_delay(mboard_members_t& mb, const size_t radio_i, bool print_status = false); double self_cal_adc_xfer_delay(mboard_members_t& mb, bool apply_delay = false); diff --git a/host/lib/usrp/x300/x300_io_impl.cpp b/host/lib/usrp/x300/x300_io_impl.cpp index e3515af0c..a4621c89f 100644 --- a/host/lib/usrp/x300/x300_io_impl.cpp +++ b/host/lib/usrp/x300/x300_io_impl.cpp @@ -106,17 +106,16 @@ void x300_impl::update_subdev_spec(const std::string &tx_rx, const size_t mb_i, chan_to_dsp_map[i] = radio_idx; //extract connection - const std::string conn = _tree->access<std::string>(mb_root / "dboards" / spec[i].db_name / (tx_rx + "_frontends") / spec[i].sd_name / "connection").get(); - + const fs_path fe_path(mb_root / "dboards" / spec[i].db_name / (tx_rx + "_frontends") / spec[i].sd_name); + const std::string conn = _tree->access<std::string>(fe_path / "connection").get(); if (tx_rx == "tx") { //swap condition _mb[mb_i].radio_perifs[radio_idx].tx_fe->set_mux(conn); } else { - //swap condition - const bool fe_swapped = (conn == "QI" or conn == "Q"); - _mb[mb_i].radio_perifs[radio_idx].ddc->set_mux(conn, fe_swapped); - //see usrp/io_impl.cpp if multiple DSPs share the frontend: - _mb[mb_i].radio_perifs[radio_idx].rx_fe->set_mux(fe_swapped); + double if_freq = (_tree->exists(fe_path / "if_freq/value")) ? + _tree->access<double>(fe_path / "if_freq/value").get() : 0.0; + _mb[mb_i].radio_perifs[radio_idx].ddc->set_mux(usrp::fe_connection_t(conn, if_freq)); + _mb[mb_i].radio_perifs[radio_idx].rx_fe->set_mux(false); } } @@ -216,9 +215,10 @@ struct x300_tx_fc_guts_t * FC credit we have is C = F + M - N (i.e. we can send C more packets * before getting another ack). */ -static size_t get_tx_flow_control_window(size_t frame_size, const device_addr_t& tx_args) +static size_t get_tx_flow_control_window(size_t frame_size, const bool dram_buff, const device_addr_t& tx_args) { - double hw_buff_size = tx_args.cast<double>("send_buff_size", X300_TX_HW_BUFF_SIZE); + double default_buff_size = dram_buff ? X300_TX_HW_BUFF_SIZE_DRAM : X300_TX_HW_BUFF_SIZE_SRAM; + double hw_buff_size = tx_args.cast<double>("send_buff_size", default_buff_size); size_t window_in_pkts = (static_cast<size_t>(hw_buff_size) / frame_size); if (window_in_pkts == 0) { throw uhd::value_error("send_buff_size must be larger than the send_frame_size."); @@ -580,8 +580,9 @@ tx_streamer::sptr x300_impl::get_tx_stream(const uhd::stream_args_t &args_) perif.duc->setup(args); //flow control setup - size_t fc_window = get_tx_flow_control_window(xport.send->get_send_frame_size(), device_addr); //In packets - const size_t fc_handle_window = std::max<size_t>(1, fc_window/X300_TX_FC_RESPONSE_FREQ); + size_t fc_window = get_tx_flow_control_window(xport.send->get_send_frame_size(), mb.has_dram_buff, device_addr); //In packets + const size_t fc_handle_window = std::max<size_t>(1, + fc_window/ (mb.has_dram_buff ? X300_TX_FC_RESPONSE_FREQ_DRAM : X300_TX_FC_RESPONSE_FREQ_SRAM)); UHD_LOG << "TX Flow Control Window = " << fc_window << ", TX Flow Control Handler Window = " << fc_handle_window << std::endl; diff --git a/host/lib/usrp/x300/x300_regs.hpp b/host/lib/usrp/x300/x300_regs.hpp index 3e0966c83..de3a3161a 100644 --- a/host/lib/usrp/x300/x300_regs.hpp +++ b/host/lib/usrp/x300/x300_regs.hpp @@ -42,7 +42,7 @@ static const uint32_t TIME = 128; static const uint32_t RX_DSP = 144; static const uint32_t TX_DSP = 184; static const uint32_t LEDS = 195; -static const uint32_t FP_GPIO = 200; +static const uint32_t FP_GPIO = 201; static const uint32_t RX_FRONT = 208; static const uint32_t TX_FRONT = 216; @@ -77,6 +77,8 @@ localparam ZPU_SR_XB_LOCAL = 03; localparam ZPU_SR_SPI = 32; localparam ZPU_SR_ETHINT0 = 40; localparam ZPU_SR_ETHINT1 = 56; +localparam ZPU_SR_DRAM_FIFO0 = 72; +localparam ZPU_SR_DRAM_FIFO1 = 80; //reset bits #define ZPU_SR_SW_RST_ETH_PHY (1<<0) @@ -89,6 +91,8 @@ localparam ZPU_RB_CLK_STATUS = 3; localparam ZPU_RB_COMPAT_NUM = 6; localparam ZPU_RB_ETH_TYPE0 = 4; localparam ZPU_RB_ETH_TYPE1 = 5; +localparam ZPU_RB_DRAM_FIFO0 = 10; +localparam ZPU_RB_DRAM_FIFO1 = 11; //spi slaves on radio #define DB_DAC_SEN (1 << 7) diff --git a/host/lib/usrp_clock/octoclock/CMakeLists.txt b/host/lib/usrp_clock/octoclock/CMakeLists.txt index a54d27c52..d2b70e356 100644 --- a/host/lib/usrp_clock/octoclock/CMakeLists.txt +++ b/host/lib/usrp_clock/octoclock/CMakeLists.txt @@ -18,8 +18,6 @@ ######################################################################## # Conditionally configure the OctoClock support ######################################################################## -LIBUHD_REGISTER_COMPONENT("OctoClock" ENABLE_OCTOCLOCK ON "ENABLE_LIBUHD" OFF OFF) - IF(ENABLE_OCTOCLOCK) LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/octoclock_eeprom.cpp diff --git a/host/lib/usrp_clock/octoclock/octoclock_impl.cpp b/host/lib/usrp_clock/octoclock/octoclock_impl.cpp index 22c26b42c..cd851976f 100644 --- a/host/lib/usrp_clock/octoclock/octoclock_impl.cpp +++ b/host/lib/usrp_clock/octoclock/octoclock_impl.cpp @@ -236,21 +236,21 @@ octoclock_impl::octoclock_impl(const device_addr_t &_device_addr){ _oc_dict[oc].eeprom = octoclock_eeprom_t(_oc_dict[oc].ctrl_xport); _tree->create<octoclock_eeprom_t>(oc_path / "eeprom") .set(_oc_dict[oc].eeprom) - .subscribe(boost::bind(&octoclock_impl::_set_eeprom, this, oc, _1)); + .add_coerced_subscriber(boost::bind(&octoclock_impl::_set_eeprom, this, oc, _1)); //////////////////////////////////////////////////////////////////// // Initialize non-GPSDO sensors //////////////////////////////////////////////////////////////////// _tree->create<boost::uint32_t>(oc_path / "time") - .publish(boost::bind(&octoclock_impl::_get_time, this, oc)); + .set_publisher(boost::bind(&octoclock_impl::_get_time, this, oc)); _tree->create<sensor_value_t>(oc_path / "sensors/ext_ref_detected") - .publish(boost::bind(&octoclock_impl::_ext_ref_detected, this, oc)); + .set_publisher(boost::bind(&octoclock_impl::_ext_ref_detected, this, oc)); _tree->create<sensor_value_t>(oc_path / "sensors/gps_detected") - .publish(boost::bind(&octoclock_impl::_gps_detected, this, oc)); + .set_publisher(boost::bind(&octoclock_impl::_gps_detected, this, oc)); _tree->create<sensor_value_t>(oc_path / "sensors/using_ref") - .publish(boost::bind(&octoclock_impl::_which_ref, this, oc)); + .set_publisher(boost::bind(&octoclock_impl::_which_ref, this, oc)); _tree->create<sensor_value_t>(oc_path / "sensors/switch_pos") - .publish(boost::bind(&octoclock_impl::_switch_pos, this, oc)); + .set_publisher(boost::bind(&octoclock_impl::_switch_pos, this, oc)); //////////////////////////////////////////////////////////////////// // Check reference and GPSDO @@ -270,7 +270,7 @@ octoclock_impl::octoclock_impl(const device_addr_t &_device_addr){ if(_oc_dict[oc].gps and _oc_dict[oc].gps->gps_detected()){ BOOST_FOREACH(const std::string &name, _oc_dict[oc].gps->get_sensors()){ _tree->create<sensor_value_t>(oc_path / "sensors" / name) - .publish(boost::bind(&gps_ctrl::get_sensor, _oc_dict[oc].gps, name)); + .set_publisher(boost::bind(&gps_ctrl::get_sensor, _oc_dict[oc].gps, name)); } } else{ diff --git a/host/lib/utils/log.cpp b/host/lib/utils/log.cpp index 8d42af9c4..4e58ce894 100644 --- a/host/lib/utils/log.cpp +++ b/host/lib/utils/log.cpp @@ -1,5 +1,5 @@ // -// Copyright 2012,2014 Ettus Research LLC +// Copyright 2012,2014,2016 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -24,19 +24,7 @@ #include <boost/thread/mutex.hpp> #include <boost/date_time/posix_time/posix_time.hpp> #include <boost/thread/locks.hpp> -#ifdef BOOST_MSVC -//whoops! https://svn.boost.org/trac/boost/ticket/5287 -//enjoy this useless dummy class instead -namespace boost{ namespace interprocess{ - struct file_lock{ - file_lock(const char * = NULL){} - void lock(void){} - void unlock(void){} - }; -}} //namespace -#else #include <boost/interprocess/sync/file_lock.hpp> -#endif #include <fstream> #include <cctype> diff --git a/host/lib/utils/msg.cpp b/host/lib/utils/msg.cpp index de98ada64..95879a116 100644 --- a/host/lib/utils/msg.cpp +++ b/host/lib/utils/msg.cpp @@ -79,6 +79,8 @@ void uhd::msg::register_handler(const handler_t &handler){ } static void default_msg_handler(uhd::msg::type_t type, const std::string &msg){ + static boost::mutex msg_mutex; + boost::mutex::scoped_lock lock(msg_mutex); switch(type){ case uhd::msg::fastpath: std::cerr << msg << std::flush; diff --git a/host/lib/utils/paths.cpp b/host/lib/utils/paths.cpp index 9cbc83062..38839c8d4 100644 --- a/host/lib/utils/paths.cpp +++ b/host/lib/utils/paths.cpp @@ -17,7 +17,6 @@ #include <uhd/config.hpp> #include <uhd/exception.hpp> -#include <uhd/transport/nirio/nifpga_lvbitx.h> #include <uhd/utils/paths.hpp> #include <boost/algorithm/string.hpp> |