diff options
Diffstat (limited to 'host/lib/usrp')
| -rw-r--r-- | host/lib/usrp/usrp2/codec_ctrl.cpp | 4 | ||||
| -rw-r--r-- | host/lib/usrp/usrp2/dboard_iface.cpp | 28 | ||||
| -rw-r--r-- | host/lib/usrp/usrp2/dboard_impl.cpp | 4 | ||||
| -rw-r--r-- | host/lib/usrp/usrp2/dsp_impl.cpp | 12 | ||||
| -rw-r--r-- | host/lib/usrp/usrp2/io_impl.cpp | 12 | ||||
| -rw-r--r-- | host/lib/usrp/usrp2/mboard_impl.cpp | 32 | ||||
| -rw-r--r-- | host/lib/usrp/usrp2/serdes_ctrl.cpp | 4 | ||||
| -rw-r--r-- | host/lib/usrp/usrp2/usrp2_regs.hpp | 132 |
8 files changed, 114 insertions, 114 deletions
diff --git a/host/lib/usrp/usrp2/codec_ctrl.cpp b/host/lib/usrp/usrp2/codec_ctrl.cpp index abd840027..32cc13ded 100644 --- a/host/lib/usrp/usrp2/codec_ctrl.cpp +++ b/host/lib/usrp/usrp2/codec_ctrl.cpp @@ -57,7 +57,7 @@ public: } //power-up adc - _iface->poke32(FR_MISC_CTRL_ADC, FRF_MISC_CTRL_ADC_ON); + _iface->poke32(U2_REG_MISC_CTRL_ADC, U2_FLAG_MISC_CTRL_ADC_ON); } ~usrp2_codec_ctrl_impl(void){ @@ -66,7 +66,7 @@ public: this->send_ad9777_reg(0); //power-down adc - _iface->poke32(FR_MISC_CTRL_ADC, FRF_MISC_CTRL_ADC_OFF); + _iface->poke32(U2_REG_MISC_CTRL_ADC, U2_FLAG_MISC_CTRL_ADC_OFF); } private: diff --git a/host/lib/usrp/usrp2/dboard_iface.cpp b/host/lib/usrp/usrp2/dboard_iface.cpp index feee0a970..9f7c7f9e6 100644 --- a/host/lib/usrp/usrp2/dboard_iface.cpp +++ b/host/lib/usrp/usrp2/dboard_iface.cpp @@ -140,13 +140,13 @@ void usrp2_dboard_iface::set_pin_ctrl(unit_t unit, boost::uint16_t value){ boost::uint32_t new_sels = 0x0; for(size_t i = 0; i < 16; i++){ bool is_bit_set = (value & (0x1 << i)) != 0; - new_sels |= ((is_bit_set)? FRF_GPIO_SEL_ATR : FRF_GPIO_SEL_GPIO) << (i*2); + new_sels |= ((is_bit_set)? U2_FLAG_GPIO_SEL_ATR : U2_FLAG_GPIO_SEL_GPIO) << (i*2); } //write the selection mux value to register switch(unit){ - case UNIT_RX: _iface->poke32(FR_GPIO_RX_SEL, new_sels); return; - case UNIT_TX: _iface->poke32(FR_GPIO_TX_SEL, new_sels); return; + case UNIT_RX: _iface->poke32(U2_REG_GPIO_RX_SEL, new_sels); return; + case UNIT_TX: _iface->poke32(U2_REG_GPIO_TX_SEL, new_sels); return; } } @@ -154,18 +154,18 @@ void usrp2_dboard_iface::set_gpio_ddr(unit_t unit, boost::uint16_t value){ _ddr_shadow = \ (_ddr_shadow & ~(0xffff << unit_to_shift[unit])) | (boost::uint32_t(value) << unit_to_shift[unit]); - _iface->poke32(FR_GPIO_DDR, _ddr_shadow); + _iface->poke32(U2_REG_GPIO_DDR, _ddr_shadow); } void usrp2_dboard_iface::write_gpio(unit_t unit, boost::uint16_t value){ _gpio_shadow = \ (_gpio_shadow & ~(0xffff << unit_to_shift[unit])) | (boost::uint32_t(value) << unit_to_shift[unit]); - _iface->poke32(FR_GPIO_IO, _gpio_shadow); + _iface->poke32(U2_REG_GPIO_IO, _gpio_shadow); } boost::uint16_t usrp2_dboard_iface::read_gpio(unit_t unit){ - return boost::uint16_t(_iface->peek32(FR_GPIO_IO) >> unit_to_shift[unit]); + return boost::uint16_t(_iface->peek32(U2_REG_GPIO_IO) >> unit_to_shift[unit]); } void usrp2_dboard_iface::set_atr_reg(unit_t unit, atr_reg_t atr, boost::uint16_t value){ @@ -174,16 +174,16 @@ void usrp2_dboard_iface::set_atr_reg(unit_t unit, atr_reg_t atr, boost::uint16_t unit_t, uhd::dict<atr_reg_t, boost::uint32_t> > unit_to_atr_to_addr = map_list_of (UNIT_RX, map_list_of - (ATR_REG_IDLE, FR_ATR_IDLE_RXSIDE) - (ATR_REG_TX_ONLY, FR_ATR_INTX_RXSIDE) - (ATR_REG_RX_ONLY, FR_ATR_INRX_RXSIDE) - (ATR_REG_FULL_DUPLEX, FR_ATR_FULL_RXSIDE) + (ATR_REG_IDLE, U2_REG_ATR_IDLE_RXSIDE) + (ATR_REG_TX_ONLY, U2_REG_ATR_INTX_RXSIDE) + (ATR_REG_RX_ONLY, U2_REG_ATR_INRX_RXSIDE) + (ATR_REG_FULL_DUPLEX, U2_REG_ATR_FULL_RXSIDE) ) (UNIT_TX, map_list_of - (ATR_REG_IDLE, FR_ATR_IDLE_TXSIDE) - (ATR_REG_TX_ONLY, FR_ATR_INTX_TXSIDE) - (ATR_REG_RX_ONLY, FR_ATR_INRX_TXSIDE) - (ATR_REG_FULL_DUPLEX, FR_ATR_FULL_TXSIDE) + (ATR_REG_IDLE, U2_REG_ATR_IDLE_TXSIDE) + (ATR_REG_TX_ONLY, U2_REG_ATR_INTX_TXSIDE) + (ATR_REG_RX_ONLY, U2_REG_ATR_INRX_TXSIDE) + (ATR_REG_FULL_DUPLEX, U2_REG_ATR_FULL_TXSIDE) ) ; _iface->poke16(unit_to_atr_to_addr[unit][atr], value); diff --git a/host/lib/usrp/usrp2/dboard_impl.cpp b/host/lib/usrp/usrp2/dboard_impl.cpp index 0ac39d2a3..4a3a70467 100644 --- a/host/lib/usrp/usrp2/dboard_impl.cpp +++ b/host/lib/usrp/usrp2/dboard_impl.cpp @@ -76,7 +76,7 @@ void usrp2_impl::update_rx_mux_config(void){ rx_mux = (((rx_mux >> 0) & 0x3) << 2) | (((rx_mux >> 2) & 0x3) << 0); } - _iface->poke32(FR_DSP_RX_MUX, rx_mux); + _iface->poke32(U2_REG_DSP_RX_MUX, rx_mux); } void usrp2_impl::update_tx_mux_config(void){ @@ -89,7 +89,7 @@ void usrp2_impl::update_tx_mux_config(void){ tx_mux = (((tx_mux >> 0) & 0xf) << 4) | (((tx_mux >> 4) & 0xf) << 0); } - _iface->poke32(FR_DSP_TX_MUX, tx_mux); + _iface->poke32(U2_REG_DSP_TX_MUX, tx_mux); } /*********************************************************************** diff --git a/host/lib/usrp/usrp2/dsp_impl.cpp b/host/lib/usrp/usrp2/dsp_impl.cpp index 195a9bc53..0d70811dd 100644 --- a/host/lib/usrp/usrp2/dsp_impl.cpp +++ b/host/lib/usrp/usrp2/dsp_impl.cpp @@ -98,11 +98,11 @@ void usrp2_impl::init_ddc_config(void){ void usrp2_impl::update_ddc_config(void){ //set the decimation - _iface->poke32(FR_DSP_RX_DECIM_RATE, calculate_cic_word(_ddc_decim)); + _iface->poke32(U2_REG_DSP_RX_DECIM_RATE, calculate_cic_word(_ddc_decim)); //set the scaling static const boost::int16_t default_rx_scale_iq = 1024; - _iface->poke32(FR_DSP_RX_SCALE_IQ, + _iface->poke32(U2_REG_DSP_RX_SCALE_IQ, calculate_iq_scale_word(default_rx_scale_iq, default_rx_scale_iq) ); } @@ -141,7 +141,7 @@ void usrp2_impl::ddc_set(const wax::obj &key, const wax::obj &val){ case DSP_PROP_FREQ_SHIFT:{ double new_freq = val.as<double>(); - _iface->poke32(FR_DSP_RX_FREQ, + _iface->poke32(U2_REG_DSP_RX_FREQ, calculate_freq_word_and_update_actual_freq(new_freq, get_master_clock_freq()) ); _ddc_freq = new_freq; //shadow @@ -184,10 +184,10 @@ void usrp2_impl::update_duc_config(void){ boost::int16_t scale = rint((4096*std::pow(2, ceil(log2(interp_cubed))))/(1.65*interp_cubed)); //set the interpolation - _iface->poke32(FR_DSP_TX_INTERP_RATE, calculate_cic_word(_duc_interp)); + _iface->poke32(U2_REG_DSP_TX_INTERP_RATE, calculate_cic_word(_duc_interp)); //set the scaling - _iface->poke32(FR_DSP_TX_SCALE_IQ, calculate_iq_scale_word(scale, scale)); + _iface->poke32(U2_REG_DSP_TX_SCALE_IQ, calculate_iq_scale_word(scale, scale)); } /*********************************************************************** @@ -224,7 +224,7 @@ void usrp2_impl::duc_set(const wax::obj &key, const wax::obj &val){ case DSP_PROP_FREQ_SHIFT:{ double new_freq = val.as<double>(); - _iface->poke32(FR_DSP_TX_FREQ, + _iface->poke32(U2_REG_DSP_TX_FREQ, calculate_freq_word_and_update_actual_freq(new_freq, get_master_clock_freq()) ); _duc_freq = new_freq; //shadow diff --git a/host/lib/usrp/usrp2/io_impl.cpp b/host/lib/usrp/usrp2/io_impl.cpp index 18f2d013f..1c7113197 100644 --- a/host/lib/usrp/usrp2/io_impl.cpp +++ b/host/lib/usrp/usrp2/io_impl.cpp @@ -107,17 +107,17 @@ void usrp2_impl::io_init(void){ //setup RX DSP regs std::cout << "RX samples per packet: " << get_max_recv_samps_per_packet() << std::endl; - _iface->poke32(FR_RX_CTRL_NSAMPS_PER_PKT, get_max_recv_samps_per_packet()); - _iface->poke32(FR_RX_CTRL_NCHANNELS, 1); - _iface->poke32(FR_RX_CTRL_CLEAR_OVERRUN, 1); //reset - _iface->poke32(FR_RX_CTRL_VRT_HEADER, 0 + _iface->poke32(U2_REG_RX_CTRL_NSAMPS_PER_PKT, get_max_recv_samps_per_packet()); + _iface->poke32(U2_REG_RX_CTRL_NCHANNELS, 1); + _iface->poke32(U2_REG_RX_CTRL_CLEAR_OVERRUN, 1); //reset + _iface->poke32(U2_REG_RX_CTRL_VRT_HEADER, 0 | (0x1 << 28) //if data with stream id | (0x1 << 26) //has trailer | (0x3 << 22) //integer time other | (0x1 << 20) //fractional time sample count ); - _iface->poke32(FR_RX_CTRL_VRT_STREAM_ID, 0); - _iface->poke32(FR_RX_CTRL_VRT_TRAILER, 0); + _iface->poke32(U2_REG_RX_CTRL_VRT_STREAM_ID, 0); + _iface->poke32(U2_REG_RX_CTRL_VRT_TRAILER, 0); std::cout << "TX samples per packet: " << get_max_send_samps_per_packet() << std::endl; diff --git a/host/lib/usrp/usrp2/mboard_impl.cpp b/host/lib/usrp/usrp2/mboard_impl.cpp index a2aeadf16..78fc5dc23 100644 --- a/host/lib/usrp/usrp2/mboard_impl.cpp +++ b/host/lib/usrp/usrp2/mboard_impl.cpp @@ -54,26 +54,26 @@ void usrp2_impl::update_clock_config(void){ //translate pps source enums switch(_clock_config.pps_source){ - case clock_config_t::PPS_SMA: pps_flags |= FRF_TIME64_PPS_SMA; break; - case clock_config_t::PPS_MIMO: pps_flags |= FRF_TIME64_PPS_MIMO; break; + case clock_config_t::PPS_SMA: pps_flags |= U2_FLAG_TIME64_PPS_SMA; break; + case clock_config_t::PPS_MIMO: pps_flags |= U2_FLAG_TIME64_PPS_MIMO; break; default: throw std::runtime_error("usrp2: unhandled clock configuration pps source"); } //translate pps polarity enums switch(_clock_config.pps_polarity){ - case clock_config_t::PPS_POS: pps_flags |= FRF_TIME64_PPS_POSEDGE; break; - case clock_config_t::PPS_NEG: pps_flags |= FRF_TIME64_PPS_NEGEDGE; break; + case clock_config_t::PPS_POS: pps_flags |= U2_FLAG_TIME64_PPS_POSEDGE; break; + case clock_config_t::PPS_NEG: pps_flags |= U2_FLAG_TIME64_PPS_NEGEDGE; break; default: throw std::runtime_error("usrp2: unhandled clock configuration pps polarity"); } //set the pps flags - _iface->poke32(FR_TIME64_FLAGS, pps_flags); + _iface->poke32(U2_REG_TIME64_FLAGS, pps_flags); //clock source ref 10mhz switch(_clock_config.ref_source){ - case clock_config_t::REF_INT : _iface->poke32(FR_MISC_CTRL_CLOCK, 0x10); break; - case clock_config_t::REF_SMA : _iface->poke32(FR_MISC_CTRL_CLOCK, 0x1C); break; - case clock_config_t::REF_MIMO: _iface->poke32(FR_MISC_CTRL_CLOCK, 0x15); break; + case clock_config_t::REF_INT : _iface->poke32(U2_REG_MISC_CTRL_CLOCK, 0x10); break; + case clock_config_t::REF_SMA : _iface->poke32(U2_REG_MISC_CTRL_CLOCK, 0x1C); break; + case clock_config_t::REF_MIMO: _iface->poke32(U2_REG_MISC_CTRL_CLOCK, 0x15); break; default: throw std::runtime_error("usrp2: unhandled clock configuration reference source"); } @@ -84,18 +84,18 @@ void usrp2_impl::update_clock_config(void){ void usrp2_impl::set_time_spec(const time_spec_t &time_spec, bool now){ //set the ticks - _iface->poke32(FR_TIME64_TICKS, time_spec.get_ticks(get_master_clock_freq())); + _iface->poke32(U2_REG_TIME64_TICKS, time_spec.get_ticks(get_master_clock_freq())); //set the flags register - boost::uint32_t imm_flags = (now)? FRF_TIME64_LATCH_NOW : FRF_TIME64_LATCH_NEXT_PPS; - _iface->poke32(FR_TIME64_IMM, imm_flags); + boost::uint32_t imm_flags = (now)? U2_FLAG_TIME64_LATCH_NOW : U2_FLAG_TIME64_LATCH_NEXT_PPS; + _iface->poke32(U2_REG_TIME64_IMM, imm_flags); //set the seconds (latches in all 3 registers) - _iface->poke32(FR_TIME64_SECS, time_spec.secs); + _iface->poke32(U2_REG_TIME64_SECS, time_spec.secs); } void usrp2_impl::issue_ddc_stream_cmd(const stream_cmd_t &stream_cmd){ - UHD_ASSERT_THROW(stream_cmd.num_samps <= FR_RX_CTRL_MAX_SAMPS_PER_CMD); + UHD_ASSERT_THROW(stream_cmd.num_samps <= U2_REG_RX_CTRL_MAX_SAMPS_PER_CMD); //setup the mode to instruction flags typedef boost::tuple<bool, bool, bool> inst_t; @@ -112,14 +112,14 @@ void usrp2_impl::issue_ddc_stream_cmd(const stream_cmd_t &stream_cmd){ boost::tie(inst_reload, inst_chain, inst_samps) = mode_to_inst[stream_cmd.stream_mode]; //issue the stream command - _iface->poke32(FR_RX_CTRL_STREAM_CMD, FR_RX_CTRL_MAKE_CMD( + _iface->poke32(U2_REG_RX_CTRL_STREAM_CMD, U2_REG_RX_CTRL_MAKE_CMD( (inst_samps)? stream_cmd.num_samps : ((inst_chain)? get_max_recv_samps_per_packet() : 1), (stream_cmd.stream_now)? 1 : 0, (inst_chain)? 1 : 0, (inst_reload)? 1 : 0 )); - _iface->poke32(FR_RX_CTRL_TIME_SECS, stream_cmd.time_spec.secs); - _iface->poke32(FR_RX_CTRL_TIME_TICKS, stream_cmd.time_spec.get_ticks(get_master_clock_freq())); + _iface->poke32(U2_REG_RX_CTRL_TIME_SECS, stream_cmd.time_spec.secs); + _iface->poke32(U2_REG_RX_CTRL_TIME_TICKS, stream_cmd.time_spec.get_ticks(get_master_clock_freq())); } /*********************************************************************** diff --git a/host/lib/usrp/usrp2/serdes_ctrl.cpp b/host/lib/usrp/usrp2/serdes_ctrl.cpp index 31708d377..e83dceb96 100644 --- a/host/lib/usrp/usrp2/serdes_ctrl.cpp +++ b/host/lib/usrp/usrp2/serdes_ctrl.cpp @@ -27,11 +27,11 @@ class usrp2_serdes_ctrl_impl : public usrp2_serdes_ctrl{ public: usrp2_serdes_ctrl_impl(usrp2_iface::sptr iface){ _iface = iface; - _iface->poke32(FR_MISC_CTRL_SERDES, FRF_MISC_CTRL_SERDES_ENABLE | FRF_MISC_CTRL_SERDES_RXEN); + _iface->poke32(U2_REG_MISC_CTRL_SERDES, U2_FLAG_MISC_CTRL_SERDES_ENABLE | U2_FLAG_MISC_CTRL_SERDES_RXEN); } ~usrp2_serdes_ctrl_impl(void){ - _iface->poke32(FR_MISC_CTRL_SERDES, 0); //power-down + _iface->poke32(U2_REG_MISC_CTRL_SERDES, 0); //power-down } private: diff --git a/host/lib/usrp/usrp2/usrp2_regs.hpp b/host/lib/usrp/usrp2/usrp2_regs.hpp index 0f675357b..589fa71a3 100644 --- a/host/lib/usrp/usrp2/usrp2_regs.hpp +++ b/host/lib/usrp/usrp2/usrp2_regs.hpp @@ -64,23 +64,23 @@ ///////////////////////////////////////////////// // Misc Control //////////////////////////////////////////////// -#define FR_MISC_CTRL_CLOCK _SR_ADDR(0) -#define FR_MISC_CTRL_SERDES _SR_ADDR(1) -#define FR_MISC_CTRL_ADC _SR_ADDR(2) -#define FR_MISC_CTRL_LEDS _SR_ADDR(3) -#define FR_MISC_CTRL_PHY _SR_ADDR(4) // LSB is reset line to eth phy -#define FR_MISC_CTRL_DBG_MUX _SR_ADDR(5) -#define FR_MISC_CTRL_RAM_PAGE _SR_ADDR(6) // FIXME should go somewhere else... -#define FR_MISC_CTRL_FLUSH_ICACHE _SR_ADDR(7) // Flush the icache -#define FR_MISC_CTRL_LED_SRC _SR_ADDR(8) // HW or SW control for LEDs - -#define FRF_MISC_CTRL_SERDES_ENABLE 8 -#define FRF_MISC_CTRL_SERDES_PRBSEN 4 -#define FRF_MISC_CTRL_SERDES_LOOPEN 2 -#define FRF_MISC_CTRL_SERDES_RXEN 1 - -#define FRF_MISC_CTRL_ADC_ON 0x0F -#define FRF_MISC_CTRL_ADC_OFF 0x00 +#define U2_REG_MISC_CTRL_CLOCK _SR_ADDR(0) +#define U2_REG_MISC_CTRL_SERDES _SR_ADDR(1) +#define U2_REG_MISC_CTRL_ADC _SR_ADDR(2) +#define U2_REG_MISC_CTRL_LEDS _SR_ADDR(3) +#define U2_REG_MISC_CTRL_PHY _SR_ADDR(4) // LSB is reset line to eth phy +#define U2_REG_MISC_CTRL_DBG_MUX _SR_ADDR(5) +#define U2_REG_MISC_CTRL_RAM_PAGE _SR_ADDR(6) // FIXME should go somewhere else... +#define U2_REG_MISC_CTRL_FLUSH_ICACHE _SR_ADDR(7) // Flush the icache +#define U2_REG_MISC_CTRL_LED_SRC _SR_ADDR(8) // HW or SW control for LEDs + +#define U2_FLAG_MISC_CTRL_SERDES_ENABLE 8 +#define U2_FLAG_MISC_CTRL_SERDES_PRBSEN 4 +#define U2_FLAG_MISC_CTRL_SERDES_LOOPEN 2 +#define U2_FLAG_MISC_CTRL_SERDES_RXEN 1 + +#define U2_FLAG_MISC_CTRL_ADC_ON 0x0F +#define U2_FLAG_MISC_CTRL_ADC_OFF 0x00 ///////////////////////////////////////////////// // VITA49 64 bit time (write only) @@ -101,26 +101,26 @@ * * </pre> */ -#define FR_TIME64_SECS _SR_ADDR(SR_TIME64 + 0) // value to set absolute secs to on next PPS -#define FR_TIME64_TICKS _SR_ADDR(SR_TIME64 + 1) // value to set absolute ticks to on next PPS -#define FR_TIME64_FLAGS _SR_ADDR(SR_TIME64 + 2) // flags - see chart above -#define FR_TIME64_IMM _SR_ADDR(SR_TIME64 + 3) // set immediate (0=latch on next pps, 1=latch immediate, default=0) +#define U2_REG_TIME64_SECS _SR_ADDR(SR_TIME64 + 0) // value to set absolute secs to on next PPS +#define U2_REG_TIME64_TICKS _SR_ADDR(SR_TIME64 + 1) // value to set absolute ticks to on next PPS +#define U2_REG_TIME64_FLAGS _SR_ADDR(SR_TIME64 + 2) // flags - see chart above +#define U2_REG_TIME64_IMM _SR_ADDR(SR_TIME64 + 3) // set immediate (0=latch on next pps, 1=latch immediate, default=0) //pps flags (see above) -#define FRF_TIME64_PPS_NEGEDGE (0 << 0) -#define FRF_TIME64_PPS_POSEDGE (1 << 0) -#define FRF_TIME64_PPS_SMA (0 << 1) -#define FRF_TIME64_PPS_MIMO (1 << 1) +#define U2_FLAG_TIME64_PPS_NEGEDGE (0 << 0) +#define U2_FLAG_TIME64_PPS_POSEDGE (1 << 0) +#define U2_FLAG_TIME64_PPS_SMA (0 << 1) +#define U2_FLAG_TIME64_PPS_MIMO (1 << 1) -#define FRF_TIME64_LATCH_NOW 1 -#define FRF_TIME64_LATCH_NEXT_PPS 0 +#define U2_FLAG_TIME64_LATCH_NOW 1 +#define U2_FLAG_TIME64_LATCH_NEXT_PPS 0 ///////////////////////////////////////////////// // DSP TX Regs //////////////////////////////////////////////// -#define FR_DSP_TX_FREQ _SR_ADDR(SR_TX_DSP + 0) -#define FR_DSP_TX_SCALE_IQ _SR_ADDR(SR_TX_DSP + 1) // {scale_i,scale_q} -#define FR_DSP_TX_INTERP_RATE _SR_ADDR(SR_TX_DSP + 2) +#define U2_REG_DSP_TX_FREQ _SR_ADDR(SR_TX_DSP + 0) +#define U2_REG_DSP_TX_SCALE_IQ _SR_ADDR(SR_TX_DSP + 1) // {scale_i,scale_q} +#define U2_REG_DSP_TX_INTERP_RATE _SR_ADDR(SR_TX_DSP + 2) /*! * \brief output mux configuration. @@ -156,17 +156,17 @@ * The default value is 0x10 * </pre> */ -#define FR_DSP_TX_MUX _SR_ADDR(SR_TX_DSP + 4) +#define U2_REG_DSP_TX_MUX _SR_ADDR(SR_TX_DSP + 4) ///////////////////////////////////////////////// // DSP RX Regs //////////////////////////////////////////////// -#define FR_DSP_RX_FREQ _SR_ADDR(SR_RX_DSP + 0) -#define FR_DSP_RX_SCALE_IQ _SR_ADDR(SR_RX_DSP + 1) // {scale_i,scale_q} -#define FR_DSP_RX_DECIM_RATE _SR_ADDR(SR_RX_DSP + 2) -#define FR_DSP_RX_DCOFFSET_I _SR_ADDR(SR_RX_DSP + 3) // Bit 31 high sets fixed offset mode, using lower 14 bits, +#define U2_REG_DSP_RX_FREQ _SR_ADDR(SR_RX_DSP + 0) +#define U2_REG_DSP_RX_SCALE_IQ _SR_ADDR(SR_RX_DSP + 1) // {scale_i,scale_q} +#define U2_REG_DSP_RX_DECIM_RATE _SR_ADDR(SR_RX_DSP + 2) +#define U2_REG_DSP_RX_DCOFFSET_I _SR_ADDR(SR_RX_DSP + 3) // Bit 31 high sets fixed offset mode, using lower 14 bits, // otherwise it is automatic -#define FR_DSP_RX_DCOFFSET_Q _SR_ADDR(SR_RX_DSP + 4) // Bit 31 high sets fixed offset mode, using lower 14 bits +#define U2_REG_DSP_RX_DCOFFSET_Q _SR_ADDR(SR_RX_DSP + 4) // Bit 31 high sets fixed offset mode, using lower 14 bits /*! * \brief input mux configuration. * @@ -188,7 +188,7 @@ * The default value is 0x4 * </pre> */ -#define FR_DSP_RX_MUX _SR_ADDR(SR_RX_DSP + 5) // called adc_mux in dsp_core_rx.v +#define U2_REG_DSP_RX_MUX _SR_ADDR(SR_RX_DSP + 5) // called adc_mux in dsp_core_rx.v //////////////////////////////////////////////// // GPIO, Slave 4 @@ -196,52 +196,52 @@ // // These go to the daughterboard i/o pins // -#define FR_GPIO_BASE 0xC800 +#define U2_REG_GPIO_BASE 0xC800 -#define FR_GPIO_IO FR_GPIO_BASE + 0 // 32 bits, gpio io pins (tx high 16 bits, rx low 16 bits) -#define FR_GPIO_DDR FR_GPIO_BASE + 4 // 32 bits, gpio ddr, 1 means output (tx high 16 bits, rx low 16 bits) -#define FR_GPIO_TX_SEL FR_GPIO_BASE + 8 // 16 2-bit fields select which source goes to TX DB -#define FR_GPIO_RX_SEL FR_GPIO_BASE + 12 // 16 2-bit fields select which source goes to RX DB +#define U2_REG_GPIO_IO U2_REG_GPIO_BASE + 0 // 32 bits, gpio io pins (tx high 16 bits, rx low 16 bits) +#define U2_REG_GPIO_DDR U2_REG_GPIO_BASE + 4 // 32 bits, gpio ddr, 1 means output (tx high 16 bits, rx low 16 bits) +#define U2_REG_GPIO_TX_SEL U2_REG_GPIO_BASE + 8 // 16 2-bit fields select which source goes to TX DB +#define U2_REG_GPIO_RX_SEL U2_REG_GPIO_BASE + 12 // 16 2-bit fields select which source goes to RX DB // each 2-bit sel field is layed out this way -#define FRF_GPIO_SEL_GPIO 0 // if pin is an output, set by GPIO register -#define FRF_GPIO_SEL_ATR 1 // if pin is an output, set by ATR logic -#define FRF_GPIO_SEL_DEBUG_0 2 // if pin is an output, debug lines from FPGA fabric -#define FRF_GPIO_SEL_DEBUG_1 3 // if pin is an output, debug lines from FPGA fabric +#define U2_FLAG_GPIO_SEL_GPIO 0 // if pin is an output, set by GPIO register +#define U2_FLAG_GPIO_SEL_ATR 1 // if pin is an output, set by ATR logic +#define U2_FLAG_GPIO_SEL_DEBUG_0 2 // if pin is an output, debug lines from FPGA fabric +#define U2_FLAG_GPIO_SEL_DEBUG_1 3 // if pin is an output, debug lines from FPGA fabric /////////////////////////////////////////////////// // ATR Controller, Slave 11 //////////////////////////////////////////////// -#define FR_ATR_BASE 0xE400 +#define U2_REG_ATR_BASE 0xE400 -#define FR_ATR_IDLE_TXSIDE FR_ATR_BASE + 0 -#define FR_ATR_IDLE_RXSIDE FR_ATR_BASE + 2 -#define FR_ATR_INTX_TXSIDE FR_ATR_BASE + 4 -#define FR_ATR_INTX_RXSIDE FR_ATR_BASE + 6 -#define FR_ATR_INRX_TXSIDE FR_ATR_BASE + 8 -#define FR_ATR_INRX_RXSIDE FR_ATR_BASE + 10 -#define FR_ATR_FULL_TXSIDE FR_ATR_BASE + 12 -#define FR_ATR_FULL_RXSIDE FR_ATR_BASE + 14 +#define U2_REG_ATR_IDLE_TXSIDE U2_REG_ATR_BASE + 0 +#define U2_REG_ATR_IDLE_RXSIDE U2_REG_ATR_BASE + 2 +#define U2_REG_ATR_INTX_TXSIDE U2_REG_ATR_BASE + 4 +#define U2_REG_ATR_INTX_RXSIDE U2_REG_ATR_BASE + 6 +#define U2_REG_ATR_INRX_TXSIDE U2_REG_ATR_BASE + 8 +#define U2_REG_ATR_INRX_RXSIDE U2_REG_ATR_BASE + 10 +#define U2_REG_ATR_FULL_TXSIDE U2_REG_ATR_BASE + 12 +#define U2_REG_ATR_FULL_RXSIDE U2_REG_ATR_BASE + 14 /////////////////////////////////////////////////// // VITA RX CTRL regs /////////////////////////////////////////////////// // The following 3 are logically a single command register. // They are clocked into the underlying fifo when time_ticks is written. -#define FR_RX_CTRL_STREAM_CMD _SR_ADDR(SR_RX_CTRL + 0) // {now, chain, num_samples(30) -#define FR_RX_CTRL_TIME_SECS _SR_ADDR(SR_RX_CTRL + 1) -#define FR_RX_CTRL_TIME_TICKS _SR_ADDR(SR_RX_CTRL + 2) +#define U2_REG_RX_CTRL_STREAM_CMD _SR_ADDR(SR_RX_CTRL + 0) // {now, chain, num_samples(30) +#define U2_REG_RX_CTRL_TIME_SECS _SR_ADDR(SR_RX_CTRL + 1) +#define U2_REG_RX_CTRL_TIME_TICKS _SR_ADDR(SR_RX_CTRL + 2) -#define FR_RX_CTRL_CLEAR_OVERRUN _SR_ADDR(SR_RX_CTRL + 3) // write anything to clear overrun -#define FR_RX_CTRL_VRT_HEADER _SR_ADDR(SR_RX_CTRL + 4) // word 0 of packet. FPGA fills in packet counter -#define FR_RX_CTRL_VRT_STREAM_ID _SR_ADDR(SR_RX_CTRL + 5) // word 1 of packet. -#define FR_RX_CTRL_VRT_TRAILER _SR_ADDR(SR_RX_CTRL + 6) -#define FR_RX_CTRL_NSAMPS_PER_PKT _SR_ADDR(SR_RX_CTRL + 7) -#define FR_RX_CTRL_NCHANNELS _SR_ADDR(SR_RX_CTRL + 8) // 1 in basic case, up to 4 for vector sources +#define U2_REG_RX_CTRL_CLEAR_OVERRUN _SR_ADDR(SR_RX_CTRL + 3) // write anything to clear overrun +#define U2_REG_RX_CTRL_VRT_HEADER _SR_ADDR(SR_RX_CTRL + 4) // word 0 of packet. FPGA fills in packet counter +#define U2_REG_RX_CTRL_VRT_STREAM_ID _SR_ADDR(SR_RX_CTRL + 5) // word 1 of packet. +#define U2_REG_RX_CTRL_VRT_TRAILER _SR_ADDR(SR_RX_CTRL + 6) +#define U2_REG_RX_CTRL_NSAMPS_PER_PKT _SR_ADDR(SR_RX_CTRL + 7) +#define U2_REG_RX_CTRL_NCHANNELS _SR_ADDR(SR_RX_CTRL + 8) // 1 in basic case, up to 4 for vector sources //helpful macros for dealing with stream cmd -#define FR_RX_CTRL_MAX_SAMPS_PER_CMD 0x1fffffff -#define FR_RX_CTRL_MAKE_CMD(nsamples, now, chain, reload) \ +#define U2_REG_RX_CTRL_MAX_SAMPS_PER_CMD 0x1fffffff +#define U2_REG_RX_CTRL_MAKE_CMD(nsamples, now, chain, reload) \ ((((now) & 0x1) << 31) | (((chain) & 0x1) << 30) | (((reload) & 0x1) << 29) | ((nsamples) & 0x1fffffff)) #endif /* INCLUDED_USRP2_REGS_HPP */ |