diff options
Diffstat (limited to 'host/lib/usrp')
47 files changed, 4228 insertions, 629 deletions
diff --git a/host/lib/usrp/b200/CMakeLists.txt b/host/lib/usrp/b200/CMakeLists.txt index ce89b5d80..cd8ebcba7 100644 --- a/host/lib/usrp/b200/CMakeLists.txt +++ b/host/lib/usrp/b200/CMakeLists.txt @@ -26,6 +26,7 @@ LIBUHD_REGISTER_COMPONENT("B200" ENABLE_B200 ON "ENABLE_LIBUHD;ENABLE_USB" OFF) IF(ENABLE_B200) LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/b200_image_loader.cpp ${CMAKE_CURRENT_SOURCE_DIR}/b200_impl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/b200_iface.cpp ${CMAKE_CURRENT_SOURCE_DIR}/b200_io_impl.cpp diff --git a/host/lib/usrp/b200/b200_iface.cpp b/host/lib/usrp/b200/b200_iface.cpp index 270d3bb4b..4754a6357 100644 --- a/host/lib/usrp/b200/b200_iface.cpp +++ b/host/lib/usrp/b200/b200_iface.cpp @@ -511,7 +511,7 @@ public: throw uhd::io_error((boost::format("Short write on set FPGA hash (expecting: %d, returned: %d)") % bytes_to_send % ret).str()); } - boost::uint32_t load_fpga(const std::string filestring) { + boost::uint32_t load_fpga(const std::string filestring, bool force) { boost::uint8_t fx3_state = 0; boost::uint32_t wait_count; @@ -522,7 +522,7 @@ public: hash_type hash = generate_hash(filename); hash_type loaded_hash; usrp_get_fpga_hash(loaded_hash); - if (hash == loaded_hash) return 0; + if (hash == loaded_hash and !force) return 0; // Establish default largest possible control request transfer size based on operating USB speed int transfer_size = VREQ_DEFAULT_SIZE; diff --git a/host/lib/usrp/b200/b200_iface.hpp b/host/lib/usrp/b200/b200_iface.hpp index 1d123439a..0c7ee6b9e 100644 --- a/host/lib/usrp/b200/b200_iface.hpp +++ b/host/lib/usrp/b200/b200_iface.hpp @@ -97,7 +97,7 @@ public: virtual void set_fpga_reset_pin(const bool reset) = 0; //! load an FPGA image - virtual boost::uint32_t load_fpga(const std::string filestring) = 0; + virtual boost::uint32_t load_fpga(const std::string filestring, bool force=false) = 0; virtual void write_eeprom(boost::uint16_t addr, boost::uint16_t offset, const uhd::byte_vector_t &bytes) = 0; diff --git a/host/lib/usrp/b200/b200_image_loader.cpp b/host/lib/usrp/b200/b200_image_loader.cpp new file mode 100644 index 000000000..87010244c --- /dev/null +++ b/host/lib/usrp/b200/b200_image_loader.cpp @@ -0,0 +1,125 @@ +// +// Copyright 2014-2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <boost/assign.hpp> +#include <boost/foreach.hpp> +#include <boost/lexical_cast.hpp> + +#include <uhd/exception.hpp> +#include <uhd/image_loader.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/usrp/mboard_eeprom.hpp> +#include <uhd/utils/paths.hpp> +#include <uhd/utils/static.hpp> + +#include "b200_iface.hpp" +#include "b200_impl.hpp" + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; + +namespace uhd{ + +static b200_iface::sptr get_b200_iface(const image_loader::image_loader_args_t &image_loader_args, + mboard_eeprom_t &mb_eeprom, + bool user_specified){ + + std::vector<usb_device_handle::sptr> dev_handles = get_b200_device_handles(image_loader_args.args); + b200_iface::sptr iface; + + if(dev_handles.size() > 0){ + BOOST_FOREACH(usb_device_handle::sptr dev_handle, dev_handles){ + if(dev_handle->firmware_loaded()){ + iface = b200_iface::make(usb_control::make(dev_handle,0)); + mb_eeprom = mboard_eeprom_t(*iface, "B200"); + if(user_specified){ + if(image_loader_args.args.has_key("serial") and + mb_eeprom.get("serial") != image_loader_args.args.get("serial")){ + continue; + } + if(image_loader_args.args.has_key("name") and + mb_eeprom.get("name") != image_loader_args.args.get("name")){ + continue; + } + return iface; + } + else return iface; // Just return first found + } + } + } + + // No applicable devices found, return empty sptr so we can exit + iface.reset(); + mb_eeprom = mboard_eeprom_t(); + return iface; +} + +static bool b200_image_loader(const image_loader::image_loader_args_t &image_loader_args){ + if(!image_loader_args.load_fpga) + return false; + + bool user_specified = (image_loader_args.args.has_key("serial") or + image_loader_args.args.has_key("name")); + + // See if a B2x0 with the given args is found + mboard_eeprom_t mb_eeprom; + b200_iface::sptr iface = get_b200_iface(image_loader_args, mb_eeprom, user_specified); + if(!iface) return false; // No initialized B2x0 found + + std::string fpga_path; + if(image_loader_args.fpga_path == ""){ + /* + * Normally, we can auto-generate the FPGA filename from what's in the EEPROM, + * but if the applicable value is not in the EEPROM, the user must give a specific + * filename for us to use. + */ + std::string product = mb_eeprom.get("product"); + if(not B2X0_PRODUCT_ID.has_key(boost::lexical_cast<boost::uint16_t>(product))){ + if(user_specified){ + // The user specified a bad device but expects us to know what it is + throw uhd::runtime_error("Could not determine model. You must manually specify an FPGA image filename."); + } + else{ + return false; + } + } + else{ + fpga_path = find_image_path(B2X0_FPGA_FILE_NAME.get(get_b200_type(mb_eeprom))); + } + } + else fpga_path = image_loader_args.fpga_path; + + std::cout << boost::format("Unit: USRP %s (%s)") + % B2X0_STR_NAMES.get(get_b200_type(mb_eeprom), "B2XX") + % mb_eeprom.get("serial") + << std::endl; + + iface->load_fpga(fpga_path, true); + + return true; +} + +UHD_STATIC_BLOCK(register_b200_image_loader){ + std::string recovery_instructions = "This device is likely in an unusable state. Power-cycle the\n" + "device, and the firmware/FPGA will be reloaded the next time\n" + "UHD uses the device."; + + image_loader::register_image_loader("b200", b200_image_loader, recovery_instructions); +} + +} /* namespace uhd */ diff --git a/host/lib/usrp/b200/b200_impl.cpp b/host/lib/usrp/b200/b200_impl.cpp index 0409adf30..17086de02 100644 --- a/host/lib/usrp/b200/b200_impl.cpp +++ b/host/lib/usrp/b200/b200_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2012-2014 Ettus Research LLC +// Copyright 2012-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -76,7 +76,7 @@ public: //! Look up the type of B-Series device we're currently running. // If the product ID stored in mb_eeprom is invalid, throws a // uhd::runtime_error. -static b200_type_t get_b200_type(const mboard_eeprom_t &mb_eeprom) +b200_type_t get_b200_type(const mboard_eeprom_t &mb_eeprom) { if (mb_eeprom["product"].empty()) { throw uhd::runtime_error("B200: Missing product ID on EEPROM."); @@ -91,6 +91,21 @@ static b200_type_t get_b200_type(const mboard_eeprom_t &mb_eeprom) return B2X0_PRODUCT_ID[product_id]; } +std::vector<usb_device_handle::sptr> get_b200_device_handles(const device_addr_t &hint) +{ + std::vector<usb_device_handle::vid_pid_pair_t> vid_pid_pair_list; + + if(hint.has_key("vid") && hint.has_key("pid") && hint.has_key("type") && hint["type"] == "b200") { + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(uhd::cast::hexstr_cast<boost::uint16_t>(hint.get("vid")), + uhd::cast::hexstr_cast<boost::uint16_t>(hint.get("pid")))); + } else { + vid_pid_pair_list = b200_vid_pid_pairs; + } + + //find the usrps and load firmware + return usb_device_handle::get_device_list(vid_pid_pair_list); +} + static device_addrs_t b200_find(const device_addr_t &hint) { device_addrs_t b200_addrs; @@ -104,25 +119,14 @@ static device_addrs_t b200_find(const device_addr_t &hint) if (hint_i.has_key("addr") || hint_i.has_key("resource")) return b200_addrs; } - boost::uint16_t vid, pid; - - if(hint.has_key("vid") && hint.has_key("pid") && hint.has_key("type") && hint["type"] == "b200") { - vid = uhd::cast::hexstr_cast<boost::uint16_t>(hint.get("vid")); - pid = uhd::cast::hexstr_cast<boost::uint16_t>(hint.get("pid")); - } else { - vid = B200_VENDOR_ID; - pid = B200_PRODUCT_ID; - } - // Important note: // The get device list calls are nested inside the for loop. // This allows the usb guts to decontruct when not in use, // so that re-enumeration after fw load can occur successfully. // This requirement is a courtesy of libusb1.0 on windows. - - //find the usrps and load firmware size_t found = 0; - BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) { + std::vector<usb_device_handle::sptr> b200_device_handles = get_b200_device_handles(hint); + BOOST_FOREACH(usb_device_handle::sptr handle, b200_device_handles) { //extract the firmware path for the b200 std::string b200_fw_image; try{ @@ -153,7 +157,7 @@ static device_addrs_t b200_find(const device_addr_t &hint) //search for the device until found or timeout while (boost::get_system_time() < timeout_time and b200_addrs.empty() and found != 0) { - BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) + BOOST_FOREACH(usb_device_handle::sptr handle, b200_device_handles) { usb_control::sptr control; try{control = usb_control::make(handle, 0);} @@ -213,13 +217,50 @@ b200_impl::b200_impl(const device_addr_t &device_addr) : //try to match the given device address with something on the USB bus boost::uint16_t vid = B200_VENDOR_ID; boost::uint16_t pid = B200_PRODUCT_ID; + bool specified_vid = false; + bool specified_pid = false; + if (device_addr.has_key("vid")) + { vid = uhd::cast::hexstr_cast<boost::uint16_t>(device_addr.get("vid")); + specified_vid = true; + } + if (device_addr.has_key("pid")) + { pid = uhd::cast::hexstr_cast<boost::uint16_t>(device_addr.get("pid")); + specified_pid = true; + } - std::vector<usb_device_handle::sptr> device_list = - usb_device_handle::get_device_list(vid, pid); + std::vector<usb_device_handle::vid_pid_pair_t> vid_pid_pair_list;//search list for devices. + + // Search only for specified VID and PID if both specified + if (specified_vid && specified_pid) + { + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(vid,pid)); + } + // Search for all supported PIDs limited to specified VID if only VID specified + else if (specified_vid) + { + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(vid,B200_PRODUCT_ID)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(vid,B200_PRODUCT_NI_ID)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(vid,B210_PRODUCT_NI_ID)); + } + // Search for all supported VIDs limited to specified PID if only PID specified + else if (specified_pid) + { + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_ID,pid)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_NI_ID,pid)); + } + // Search for all supported devices if neither VID nor PID specified + else + { + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_ID,B200_PRODUCT_ID)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_NI_ID,B200_PRODUCT_NI_ID)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_NI_ID,B210_PRODUCT_NI_ID)); + } + + std::vector<usb_device_handle::sptr> device_list = usb_device_handle::get_device_list(vid_pid_pair_list); //locate the matching handle in the device list usb_device_handle::sptr handle; @@ -447,6 +488,7 @@ b200_impl::b200_impl(const device_addr_t &device_addr) : .publish(boost::bind(&b200_impl::get_tick_rate, this)) .subscribe(boost::bind(&b200_impl::update_tick_rate, this, _1)); _tree->create<time_spec_t>(mb_path / "time" / "cmd"); + _tree->create<bool>(mb_path / "auto_tick_rate").set(false); //////////////////////////////////////////////////////////////////// // and do the misc mboard sensors @@ -512,6 +554,19 @@ b200_impl::b200_impl(const device_addr_t &device_addr) : _tree->create<std::vector<std::string> >(mb_path / "clock_source" / "options").set(clock_sources); //////////////////////////////////////////////////////////////////// + // front panel gpio + //////////////////////////////////////////////////////////////////// + _radio_perifs[0].fp_gpio = gpio_core_200::make(_radio_perifs[0].ctrl, TOREG(SR_FP_GPIO), RB32_FP_GPIO); + BOOST_FOREACH(const gpio_attr_map_t::value_type attr, gpio_attr_map) + { + _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / attr.second) + .set(0) + .subscribe(boost::bind(&b200_impl::set_fp_gpio, this, _radio_perifs[0].fp_gpio, attr.first, _1)); + } + _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / "READBACK") + .publish(boost::bind(&b200_impl::get_fp_gpio, this, _radio_perifs[0].fp_gpio)); + + //////////////////////////////////////////////////////////////////// // dboard eeproms but not really //////////////////////////////////////////////////////////////////// dboard_eeprom_t db_eeprom; @@ -549,6 +604,11 @@ b200_impl::b200_impl(const device_addr_t &device_addr) : _radio_perifs[i].ddc->set_host_rate(default_tick_rate / B200_DEFAULT_DECIM); _radio_perifs[i].duc->set_host_rate(default_tick_rate / B200_DEFAULT_INTERP); } + // We can automatically choose a master clock rate, but not if the user specifies one + _tree->access<bool>(mb_path / "auto_tick_rate").set(not device_addr.has_key("master_clock_rate")); + if (not device_addr.has_key("master_clock_rate")) { + UHD_MSG(status) << "Setting master clock rate selection to 'automatic'." << std::endl; + } //GPS installed: use external ref, time, and init time spec if (_gps and _gps->gps_detected()) @@ -613,7 +673,7 @@ void b200_impl::setup_radio(const size_t dspno) .publish(boost::bind(&rx_dsp_core_3000::get_host_rates, perif.ddc)); _tree->create<double>(rx_dsp_path / "rate" / "value") .set(0.0) // We can only load a sensible value after the tick rate was set - .coerce(boost::bind(&rx_dsp_core_3000::set_host_rate, perif.ddc, _1)) + .coerce(boost::bind(&b200_impl::coerce_rx_samp_rate, this, perif.ddc, dspno, _1)) .subscribe(boost::bind(&b200_impl::update_rx_samp_rate, this, dspno, _1)) ; _tree->create<double>(rx_dsp_path / "freq" / "value") @@ -638,7 +698,7 @@ void b200_impl::setup_radio(const size_t dspno) .publish(boost::bind(&tx_dsp_core_3000::get_host_rates, perif.duc)); _tree->create<double>(tx_dsp_path / "rate" / "value") .set(0.0) // We can only load a sensible value after the tick rate was set - .coerce(boost::bind(&tx_dsp_core_3000::set_host_rate, perif.duc, _1)) + .coerce(boost::bind(&b200_impl::coerce_tx_samp_rate, this, perif.duc, dspno, _1)) .subscribe(boost::bind(&b200_impl::update_tx_samp_rate, this, dspno, _1)) ; _tree->create<double>(tx_dsp_path / "freq" / "value") @@ -682,7 +742,7 @@ void b200_impl::setup_radio(const size_t dspno) _tree->create<bool>(rf_fe_path / "use_lo_offset").set(false); _tree->create<double>(rf_fe_path / "bandwidth" / "value") .coerce(boost::bind(&ad9361_ctrl::set_bw_filter, _codec_ctrl, key, _1)) - .set(40e6); + .set(56e6); _tree->create<meta_range_t>(rf_fe_path / "bandwidth" / "range") .publish(boost::bind(&ad9361_ctrl::get_bw_filter_range, key)); _tree->create<double>(rf_fe_path / "freq" / "value") @@ -692,8 +752,29 @@ void b200_impl::setup_radio(const size_t dspno) .set(B200_DEFAULT_FREQ); _tree->create<meta_range_t>(rf_fe_path / "freq" / "range") .publish(boost::bind(&ad9361_ctrl::get_rf_freq_range)); + _tree->create<sensor_value_t>(rf_fe_path / "sensors" / "temp") + .publish(boost::bind(&ad9361_ctrl::get_temperature, _codec_ctrl)); //setup RX related stuff + if(direction) + { + _tree->create<bool>(rf_fe_path / "dc_offset" / "enable" ) + .subscribe(boost::bind(&ad9361_ctrl::set_dc_offset_auto, _codec_ctrl, key, _1)).set(true); + + _tree->create<bool>(rf_fe_path / "iq_balance" / "enable" ) + .subscribe(boost::bind(&ad9361_ctrl::set_iq_balance_auto, _codec_ctrl, key, _1)).set(true); + } + + //add all frontend filters + std::vector<std::string> filter_names = _codec_ctrl->get_filter_names(key); + for(size_t i = 0;i < filter_names.size(); i++) + { + _tree->create<filter_info_base::sptr>(rf_fe_path / "filters" / filter_names[i] / "value" ) + .publish(boost::bind(&ad9361_ctrl::get_filter, _codec_ctrl, key, filter_names[i])) + .subscribe(boost::bind(&ad9361_ctrl::set_filter, _codec_ctrl, key, filter_names[i], _1)); + } + + //setup antenna stuff if (key[0] == 'R') { static const std::vector<std::string> ants = boost::assign::list_of("TX/RX")("RX2"); @@ -703,6 +784,16 @@ void b200_impl::setup_radio(const size_t dspno) .set("RX2"); _tree->create<sensor_value_t>(rf_fe_path / "sensors" / "rssi") .publish(boost::bind(&ad9361_ctrl::get_rssi, _codec_ctrl, key)); + + //AGC setup + const std::list<std::string> mode_strings = boost::assign::list_of("slow")("fast"); + _tree->create<bool>(rf_fe_path / "gain" / "agc" / "enable") + .subscribe(boost::bind((&ad9361_ctrl::set_agc), _codec_ctrl, key, _1)) + .set(false); + _tree->create<std::string>(rf_fe_path / "gain" / "agc" / "mode" / "value") + .subscribe(boost::bind((&ad9361_ctrl::set_agc_mode), _codec_ctrl, key, _1)).set(mode_strings.front()); + _tree->create<std::list<std::string> >(rf_fe_path / "gain" / "agc" / "mode" / "options") + .set(mode_strings); } if (key[0] == 'T') { @@ -760,7 +851,7 @@ void b200_impl::codec_loopback_self_test(wb_iface::sptr iface) /*********************************************************************** * Sample and tick rate comprehension below **********************************************************************/ -void b200_impl::enforce_tick_rate_limits(size_t chan_count, double tick_rate, const char* direction /*= NULL*/) +void b200_impl::enforce_tick_rate_limits(size_t chan_count, double tick_rate, const std::string &direction /*= ""*/) { const size_t max_chans = 2; if (chan_count > max_chans) @@ -768,7 +859,7 @@ void b200_impl::enforce_tick_rate_limits(size_t chan_count, double tick_rate, co throw uhd::value_error(boost::str( boost::format("cannot not setup %d %s channels (maximum is %d)") % chan_count - % (direction ? direction : "data") + % (direction.empty() ? "data" : direction) % max_chans )); } @@ -782,20 +873,26 @@ void b200_impl::enforce_tick_rate_limits(size_t chan_count, double tick_rate, co % (tick_rate/1e6) % (max_tick_rate/1e6) % chan_count - % (direction ? direction : "data") + % (direction.empty() ? "data" : direction) )); } } } -double b200_impl::set_tick_rate(const double rate) +double b200_impl::set_tick_rate(const double new_tick_rate) { - UHD_MSG(status) << (boost::format("Asking for clock rate %.6f MHz\n") % (rate/1e6)); - - check_tick_rate_with_current_streamers(rate); // Defined in b200_io_impl.cpp + UHD_MSG(status) << (boost::format("Asking for clock rate %.6f MHz... ") % (new_tick_rate/1e6)) << std::flush; + check_tick_rate_with_current_streamers(new_tick_rate); // Defined in b200_io_impl.cpp + + // Make sure the clock rate is actually changed before doing + // the full Monty of setting regs and loopback tests etc. + if (std::abs(new_tick_rate - _tick_rate) < 1.0) { + UHD_MSG(status) << "OK" << std::endl; + return _tick_rate; + } - _tick_rate = _codec_ctrl->set_clock_rate(rate); - UHD_MSG(status) << (boost::format("Actually got clock rate %.6f MHz\n") % (_tick_rate/1e6)); + _tick_rate = _codec_ctrl->set_clock_rate(new_tick_rate); + UHD_MSG(status) << std::endl << (boost::format("Actually got clock rate %.6f MHz.") % (_tick_rate/1e6)) << std::endl; //reset after clock rate change this->reset_codec_dcm(); @@ -856,6 +953,26 @@ void b200_impl::set_mb_eeprom(const uhd::usrp::mboard_eeprom_t &mb_eeprom) } +boost::uint32_t b200_impl::get_fp_gpio(gpio_core_200::sptr gpio) +{ + return boost::uint32_t(gpio->read_gpio(dboard_iface::UNIT_RX)); +} + +void b200_impl::set_fp_gpio(gpio_core_200::sptr gpio, const gpio_attr_t attr, const boost::uint32_t value) +{ + switch (attr) + { + case GPIO_CTRL: return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value); + case GPIO_DDR: return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value); + case GPIO_OUT: return gpio->set_gpio_out(dboard_iface::UNIT_RX, value); + case GPIO_ATR_0X: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value); + case GPIO_ATR_RX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value); + case GPIO_ATR_TX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value); + case GPIO_ATR_XX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value); + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + /*********************************************************************** * Reference time and clock **********************************************************************/ diff --git a/host/lib/usrp/b200/b200_impl.hpp b/host/lib/usrp/b200/b200_impl.hpp index 65796d1a4..a3c93e22e 100644 --- a/host/lib/usrp/b200/b200_impl.hpp +++ b/host/lib/usrp/b200/b200_impl.hpp @@ -1,5 +1,5 @@ // -// Copyright 2012-2013 Ettus Research LLC +// Copyright 2012-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -43,11 +43,12 @@ #include <uhd/usrp/gps_ctrl.hpp> #include <uhd/transport/usb_zero_copy.hpp> #include <uhd/transport/bounded_buffer.hpp> +#include <boost/assign.hpp> #include <boost/weak_ptr.hpp> #include "recv_packet_demuxer_3000.hpp" -static const boost::uint8_t B200_FW_COMPAT_NUM_MAJOR = 7; +static const boost::uint8_t B200_FW_COMPAT_NUM_MAJOR = 8; static const boost::uint8_t B200_FW_COMPAT_NUM_MINOR = 0; -static const boost::uint16_t B200_FPGA_COMPAT_NUM = 8; +static const boost::uint16_t B200_FPGA_COMPAT_NUM = 9; static const double B200_BUS_CLOCK_RATE = 100e6; static const double B200_DEFAULT_TICK_RATE = 32e6; static const double B200_DEFAULT_FREQ = 100e6; // Hz @@ -82,9 +83,18 @@ static const boost::uint32_t B200_RX_GPS_UART_SID = FLIP_SID(B200_TX_GPS_UART_SI static const boost::uint32_t B200_LOCAL_CTRL_SID = 0x00000040; static const boost::uint32_t B200_LOCAL_RESP_SID = FLIP_SID(B200_LOCAL_CTRL_SID); -/*********************************************************************** - * The B200 Capability Constants - **********************************************************************/ +/* + * VID/PID pairs for all B2xx products + */ +static std::vector<uhd::transport::usb_device_handle::vid_pid_pair_t> b200_vid_pid_pairs = + boost::assign::list_of + (uhd::transport::usb_device_handle::vid_pid_pair_t(B200_VENDOR_ID, B200_PRODUCT_ID)) + (uhd::transport::usb_device_handle::vid_pid_pair_t(B200_VENDOR_NI_ID, B200_PRODUCT_NI_ID)) + (uhd::transport::usb_device_handle::vid_pid_pair_t(B200_VENDOR_NI_ID, B210_PRODUCT_NI_ID)) + ; + +b200_type_t get_b200_type(const uhd::usrp::mboard_eeprom_t &mb_eeprom); +std::vector<uhd::transport::usb_device_handle::sptr> get_b200_device_handles(const uhd::device_addr_t &hint); //! Implementation guts class b200_impl : public uhd::device @@ -98,7 +108,13 @@ public: uhd::rx_streamer::sptr get_rx_stream(const uhd::stream_args_t &args); uhd::tx_streamer::sptr get_tx_stream(const uhd::stream_args_t &args); bool recv_async_msg(uhd::async_metadata_t &, double); - void check_streamer_args(const uhd::stream_args_t &args, double tick_rate, const char* direction = NULL); + + //! Check that the combination of stream args and tick rate are valid. + // + // Basically figures out the arguments for enforce_tick_rate_limits() + // and calls said method. If arguments are invalid, throws a + // uhd::value_error. + void check_streamer_args(const uhd::stream_args_t &args, double tick_rate, const std::string &direction = ""); private: b200_type_t _b200_type; @@ -154,6 +170,7 @@ private: { radio_ctrl_core_3000::sptr ctrl; gpio_core_200_32wo::sptr atr; + gpio_core_200::sptr fp_gpio; time_core_3000::sptr time64; rx_vita_core_3000::sptr framer; rx_dsp_core_3000::sptr ddc; @@ -200,14 +217,63 @@ private: void update_enables(void); void update_atrs(void); + boost::uint32_t get_fp_gpio(gpio_core_200::sptr); + void set_fp_gpio(gpio_core_200::sptr, const gpio_attr_t, const boost::uint32_t); + double _tick_rate; double get_tick_rate(void){return _tick_rate;} double set_tick_rate(const double rate); + + /*! \brief Choose a tick rate (master clock rate) that works well for the given sampling rate. + * + * This function will try and choose a master clock rate automatically. + * See the function definition for details on the algorithm. + * + * The chosen tick rate is the largest multiple of two that is smaler + * than the max tick rate. + * The base rate is either given explicitly, or is the lcm() of the tx + * and rx sampling rates. In that case, it reads the rates directly + * from the property tree. It also tries to guess the number of channels + * (for the max possible tick rate) by checking the available streamers. + * This value, too, can explicitly be given. + * + * \param rate If this is given, it will be used as a minimum rate, or + * argument to lcm(). + * \param tree_dsp_path The sampling rate from this property tree path + * will be ignored. + * \param num_chans If given, specifies the number of channels. + */ + void set_auto_tick_rate( + const double rate=0, + const uhd::fs_path &tree_dsp_path="", + size_t num_chans=0 + ); + void update_tick_rate(const double); - void enforce_tick_rate_limits(size_t chan_count, double tick_rate, const char* direction = NULL); + + /*! Check if \p tick_rate works with \p chan_count channels. + * + * Throws a uhd::value_error if not. + */ + void enforce_tick_rate_limits(size_t chan_count, double tick_rate, const std::string &direction = ""); void check_tick_rate_with_current_streamers(double rate); + /*! Return the max number of channels on active rx_streamer or tx_streamer objects associated with this device. + * + * \param direction Set to "TX" to only check tx_streamers, "RX" to only check + * rx_streamers. Any other value will check if \e any active + * streamers are available. + * \return Return the number of tx streamers (direction=="TX"), the number of rx + * streamers (direction=="RX") or the total number of streamers. + */ + size_t max_chan_count(const std::string &direction=""); + + //! Coercer, attached to the "rate/value" property on the rx dsps. + double coerce_rx_samp_rate(rx_dsp_core_3000::sptr, size_t, const double); void update_rx_samp_rate(const size_t, const double); + + //! Coercer, attached to the "rate/value" property on the tx dsps. + double coerce_tx_samp_rate(tx_dsp_core_3000::sptr, size_t, const double); void update_tx_samp_rate(const size_t, const double); }; diff --git a/host/lib/usrp/b200/b200_io_impl.cpp b/host/lib/usrp/b200/b200_io_impl.cpp index 1e11e7ff6..c4e04f70a 100644 --- a/host/lib/usrp/b200/b200_io_impl.cpp +++ b/host/lib/usrp/b200/b200_io_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2012-2013 Ettus Research LLC +// Copyright 2012-2014 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -21,8 +21,10 @@ #include "../../transport/super_recv_packet_handler.hpp" #include "../../transport/super_send_packet_handler.hpp" #include "async_packet_handler.hpp" +#include <uhd/utils/math.hpp> #include <boost/bind.hpp> #include <boost/make_shared.hpp> +#include <boost/math/common_factor.hpp> #include <set> using namespace uhd; @@ -34,30 +36,32 @@ using namespace uhd::transport; **********************************************************************/ void b200_impl::check_tick_rate_with_current_streamers(double rate) { - size_t max_tx_chan_count = 0, max_rx_chan_count = 0; + // Defined in b200_impl.cpp + enforce_tick_rate_limits(max_chan_count("RX"), rate, "RX"); + enforce_tick_rate_limits(max_chan_count("TX"), rate, "TX"); +} + +// direction can either be "TX", "RX", or empty (default) +size_t b200_impl::max_chan_count(const std::string &direction /* = "" */) +{ + size_t max_count = 0; BOOST_FOREACH(radio_perifs_t &perif, _radio_perifs) { - { + if ((direction == "RX" or direction.empty()) and not perif.rx_streamer.expired()) { boost::shared_ptr<sph::recv_packet_streamer> rx_streamer = boost::dynamic_pointer_cast<sph::recv_packet_streamer>(perif.rx_streamer.lock()); - if (rx_streamer) - max_rx_chan_count = std::max(max_rx_chan_count, rx_streamer->get_num_channels()); + max_count = std::max(max_count, rx_streamer->get_num_channels()); } - - { + if ((direction == "TX" or direction.empty()) and not perif.tx_streamer.expired()) { boost::shared_ptr<sph::send_packet_streamer> tx_streamer = boost::dynamic_pointer_cast<sph::send_packet_streamer>(perif.tx_streamer.lock()); - if (tx_streamer) - max_tx_chan_count = std::max(max_tx_chan_count, tx_streamer->get_num_channels()); + max_count = std::max(max_count, tx_streamer->get_num_channels()); } } - - // Defined in b200_impl.cpp - enforce_tick_rate_limits(max_rx_chan_count, rate, "RX"); - enforce_tick_rate_limits(max_tx_chan_count, rate, "TX"); + return max_count; } -void b200_impl::check_streamer_args(const uhd::stream_args_t &args, double tick_rate, const char* direction /*= NULL*/) +void b200_impl::check_streamer_args(const uhd::stream_args_t &args, double tick_rate, const std::string &direction /*= ""*/) { std::set<size_t> chans_set; for (size_t stream_i = 0; stream_i < args.channels.size(); stream_i++) @@ -69,26 +73,145 @@ void b200_impl::check_streamer_args(const uhd::stream_args_t &args, double tick_ enforce_tick_rate_limits(chans_set.size(), tick_rate, direction); // Defined in b200_impl.cpp } -void b200_impl::update_tick_rate(const double rate) +void b200_impl::set_auto_tick_rate( + const double rate, + const fs_path &tree_dsp_path, + size_t num_chans +) { + if (num_chans == 0) { // Divine them + num_chans = std::max(size_t(1), max_chan_count()); + } + const double max_tick_rate = ad9361_device_t::AD9361_MAX_CLOCK_RATE/num_chans; + if (rate != 0.0 and + (uhd::math::fp_compare::fp_compare_delta<double>(rate, uhd::math::FREQ_COMPARISON_DELTA_HZ) > + uhd::math::fp_compare::fp_compare_delta<double>(max_tick_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ))) { + throw uhd::value_error(str( + boost::format("Requested sampling rate (%.2f Msps) exceeds maximum tick rate of %.2f MHz.") + % (rate / 1e6) % (max_tick_rate / 1e6) + )); + } + + // See also the doxygen documentation for these steps in b200_impl.hpp + // Step 1: Obtain LCM and max rate from all relevant dsps + boost::uint32_t lcm_rate = (rate == 0) ? 1 : static_cast<boost::uint32_t>(floor(rate + 0.5)); + for (int i = 0; i < 2; i++) { // Loop through rx and tx + std::string dir = (i == 0) ? "tx" : "rx"; + // We have no way of knowing which DSPs are used, so we check them all. + BOOST_FOREACH(const std::string &dsp_no, _tree->list(str(boost::format("/mboards/0/%s_dsps") % dir))) { + fs_path dsp_path = str(boost::format("/mboards/0/%s_dsps/%s") % dir % dsp_no); + if (dsp_path == tree_dsp_path) { + continue; + } + double this_dsp_rate = _tree->access<double>(dsp_path / "rate/value").get(); + // Check if the user selected something completely unreasonable: + if (uhd::math::fp_compare::fp_compare_delta<double>(this_dsp_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ) > + uhd::math::fp_compare::fp_compare_delta<double>(max_tick_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ)) { + throw uhd::value_error(str( + boost::format("Requested sampling rate (%.2f Msps) exceeds maximum tick rate of %.2f MHz.") + % (this_dsp_rate / 1e6) % (max_tick_rate / 1e6) + )); + } + // If this_dsp_rate == 0.0, the sampling rate for this DSP hasn't been set, so + // we don't take that into consideration. + if (this_dsp_rate == 0.0) { + continue; + } + lcm_rate = boost::math::lcm<boost::uint32_t>( + lcm_rate, + static_cast<boost::uint32_t>(floor(this_dsp_rate + 0.5)) + ); + } + } + if (lcm_rate == 1) { + // In this case, no one has ever set a sampling rate. + return; + } + + // Step 2: Check if the lcm_rate is within available limits: + double base_rate = static_cast<double>(lcm_rate); + if (uhd::math::fp_compare::fp_compare_delta<double>(base_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ) > + uhd::math::fp_compare::fp_compare_delta<double>(max_tick_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ)) { + UHD_MSG(warning) + << "Cannot automatically determine an appropriate tick rate for these sampling rates." << std::endl + << "Consider using different sampling rates, or manually specify a suitable master clock rate." << std::endl; + return; // Let the others handle this + } + + // Step 3: Choose the new rate + // Rules for choosing the tick rate: + // Choose a rate that is a power of 2 larger than the sampling rate, + // but at least 4. Cannot exceed the max tick rate, of course, but must + // be larger than the minimum tick rate. + // An equation that does all that is: + // + // f_auto = r * 2^floor(log2(f_max/r)) + // = base_rate * multiplier + // + // where r is the base rate and f_max is the maximum tick rate. The case + // where floor() yields 1 must be caught. + const double min_tick_rate = _codec_ctrl->get_clock_rate_range().start(); + // We use shifts here instead of 2^x because exp2() is not available in all compilers, + // also this guarantees no rounding issues. The type cast to int32_t serves as floor(): + boost::int32_t multiplier = (1 << boost::int32_t(uhd::math::log2(max_tick_rate / base_rate))); + if (multiplier == 2 and base_rate >= min_tick_rate) { + // Don't bother (see above) + multiplier = 1; + } + double new_rate = base_rate * multiplier; + UHD_ASSERT_THROW( + uhd::math::fp_compare::fp_compare_delta<double>(new_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ) >= + uhd::math::fp_compare::fp_compare_delta<double>(min_tick_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ) + ); + UHD_ASSERT_THROW( + uhd::math::fp_compare::fp_compare_delta<double>(new_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ) <= + uhd::math::fp_compare::fp_compare_delta<double>(max_tick_rate, uhd::math::FREQ_COMPARISON_DELTA_HZ) + ); + + if (!uhd::math::frequencies_are_equal(_tree->access<double>("/mboards/0/tick_rate").get(), new_rate)) { + _tree->access<double>("/mboards/0/tick_rate").set(new_rate); + } +} + +void b200_impl::update_tick_rate(const double new_tick_rate) { - check_tick_rate_with_current_streamers(rate); + check_tick_rate_with_current_streamers(new_tick_rate); BOOST_FOREACH(radio_perifs_t &perif, _radio_perifs) { boost::shared_ptr<sph::recv_packet_streamer> my_streamer = boost::dynamic_pointer_cast<sph::recv_packet_streamer>(perif.rx_streamer.lock()); - if (my_streamer) my_streamer->set_tick_rate(rate); - perif.framer->set_tick_rate(_tick_rate); + if (my_streamer) my_streamer->set_tick_rate(new_tick_rate); + perif.framer->set_tick_rate(new_tick_rate); } BOOST_FOREACH(radio_perifs_t &perif, _radio_perifs) { boost::shared_ptr<sph::send_packet_streamer> my_streamer = boost::dynamic_pointer_cast<sph::send_packet_streamer>(perif.tx_streamer.lock()); - if (my_streamer) my_streamer->set_tick_rate(rate); - perif.deframer->set_tick_rate(_tick_rate); + if (my_streamer) my_streamer->set_tick_rate(new_tick_rate); + perif.deframer->set_tick_rate(new_tick_rate); } } +#define CHECK_RATE_AND_THROW(rate) \ + if (uhd::math::fp_compare::fp_compare_delta<double>(rate, uhd::math::FREQ_COMPARISON_DELTA_HZ) > \ + uhd::math::fp_compare::fp_compare_delta<double>(ad9361_device_t::AD9361_MAX_CLOCK_RATE, uhd::math::FREQ_COMPARISON_DELTA_HZ)) { \ + throw uhd::value_error(str( \ + boost::format("Requested sampling rate (%.2f Msps) exceeds maximum tick rate.") \ + % (rate / 1e6) \ + )); \ + } + +double b200_impl::coerce_rx_samp_rate(rx_dsp_core_3000::sptr ddc, size_t dspno, const double rx_rate) +{ + // Have to set tick rate first, or the ddc will change the requested rate based on default tick rate + if (_tree->access<bool>("/mboards/0/auto_tick_rate").get()) { + CHECK_RATE_AND_THROW(rx_rate); + const std::string dsp_path = (boost::format("/mboards/0/rx_dsps/%s") % dspno).str(); + set_auto_tick_rate(rx_rate, dsp_path); + } + return ddc->set_host_rate(rx_rate); +} + #define CHECK_BANDWIDTH(dir) \ if (rate > _codec_ctrl->get_bw_filter_range(dir).stop()) { \ UHD_MSG(warning) \ @@ -108,6 +231,17 @@ void b200_impl::update_rx_samp_rate(const size_t dspno, const double rate) CHECK_BANDWIDTH("Rx"); } +double b200_impl::coerce_tx_samp_rate(tx_dsp_core_3000::sptr duc, size_t dspno, const double tx_rate) +{ + // Have to set tick rate first, or the duc will change the requested rate based on default tick rate + if (_tree->access<bool>("/mboards/0/auto_tick_rate").get()) { + CHECK_RATE_AND_THROW(tx_rate); + const std::string dsp_path = (boost::format("/mboards/0/tx_dsps/%s") % dspno).str(); + set_auto_tick_rate(tx_rate, dsp_path); + } + return duc->set_host_rate(tx_rate); +} + void b200_impl::update_tx_samp_rate(const size_t dspno, const double rate) { boost::shared_ptr<sph::send_packet_streamer> my_streamer = @@ -276,6 +410,9 @@ rx_streamer::sptr b200_impl::get_rx_stream(const uhd::stream_args_t &args_) if (args.otw_format.empty()) args.otw_format = "sc16"; args.channels = args.channels.empty()? std::vector<size_t>(1, 0) : args.channels; + if (_tree->access<bool>("/mboards/0/auto_tick_rate").get()) { + set_auto_tick_rate(0, "", args.channels.size()); + } check_streamer_args(args, this->get_tick_rate(), "RX"); boost::shared_ptr<sph::recv_packet_streamer> my_streamer; @@ -383,7 +520,10 @@ tx_streamer::sptr b200_impl::get_tx_stream(const uhd::stream_args_t &args_) if (args.otw_format.empty()) args.otw_format = "sc16"; args.channels = args.channels.empty()? std::vector<size_t>(1, 0) : args.channels; - check_streamer_args(args, this->get_tick_rate(), "TX"); + if (_tree->access<bool>("/mboards/0/auto_tick_rate").get()) { + set_auto_tick_rate(0, "", args.channels.size()); + } + check_streamer_args(args, this->get_tick_rate(), "RX"); boost::shared_ptr<sph::send_packet_streamer> my_streamer; for (size_t stream_i = 0; stream_i < args.channels.size(); stream_i++) diff --git a/host/lib/usrp/b200/b200_regs.hpp b/host/lib/usrp/b200/b200_regs.hpp index 900651f94..8f2dd03f3 100644 --- a/host/lib/usrp/b200/b200_regs.hpp +++ b/host/lib/usrp/b200/b200_regs.hpp @@ -46,11 +46,13 @@ localparam SR_TX_DSP = 184; localparam SR_TIME = 128; localparam SR_RX_FMT = 136; localparam SR_TX_FMT = 138; +localparam SR_FP_GPIO = 200; localparam RB32_TEST = 0; localparam RB64_TIME_NOW = 8; localparam RB64_TIME_PPS = 16; localparam RB64_CODEC_READBACK = 24; +localparam RB32_FP_GPIO = 32; //pll constants static const int AD9361_SLAVENO = (1 << 0); diff --git a/host/lib/usrp/common/ad9361_ctrl.cpp b/host/lib/usrp/common/ad9361_ctrl.cpp index 65e8e2df9..2d9f297b3 100644 --- a/host/lib/usrp/common/ad9361_ctrl.cpp +++ b/host/lib/usrp/common/ad9361_ctrl.cpp @@ -16,7 +16,6 @@ // #include "ad9361_ctrl.hpp" -#include <uhd/exception.hpp> #include <uhd/types/ranges.hpp> #include <uhd/utils/msg.hpp> #include <uhd/types/serial.hpp> @@ -108,6 +107,27 @@ public: return _device.set_gain(direction, chain, value); } + void set_agc(const std::string &which, bool enable) + { + boost::lock_guard<boost::mutex> lock(_mutex); + + ad9361_device_t::chain_t chain =_get_chain_from_antenna(which); + _device.set_agc(chain, enable); + } + + void set_agc_mode(const std::string &which, const std::string &mode) + { + boost::lock_guard<boost::mutex> lock(_mutex); + ad9361_device_t::chain_t chain =_get_chain_from_antenna(which); + if(mode == "slow") { + _device.set_agc_mode(chain, ad9361_device_t::GAIN_MODE_SLOW_AGC); + } else if (mode == "fast"){ + _device.set_agc_mode(chain, ad9361_device_t::GAIN_MODE_FAST_AGC); + } else { + throw uhd::runtime_error("ad9361_ctrl got an invalid AGC option."); + } + } + //! set a new clock rate, return the exact value double set_clock_rate(const double rate) { @@ -175,6 +195,62 @@ public: return sensor_value_t("RSSI", _device.get_rssi(chain), "dB"); } + //! read the internal temp sensor. Average over 3 results + sensor_value_t get_temperature() + { + return sensor_value_t("temp", _device.get_average_temperature(), "C"); + } + + void set_dc_offset_auto(const std::string &which, const bool on) + { + boost::lock_guard<boost::mutex> lock(_mutex); + + ad9361_device_t::direction_t direction = _get_direction_from_antenna(which); + _device.set_dc_offset_auto(direction,on); + } + + void set_iq_balance_auto(const std::string &which, const bool on) + { + boost::lock_guard<boost::mutex> lock(_mutex); + + ad9361_device_t::direction_t direction = _get_direction_from_antenna(which); + _device.set_iq_balance_auto(direction,on); + } + + double set_bw_filter(const std::string &which, const double bw) + { + boost::lock_guard<boost::mutex> lock(_mutex); + + ad9361_device_t::direction_t direction = _get_direction_from_antenna(which); + return _device.set_bw_filter(direction, bw); + } + + std::vector<std::string> get_filter_names(const std::string &which) + { + boost::lock_guard<boost::mutex> lock(_mutex); + + ad9361_device_t::direction_t direction = _get_direction_from_antenna(which); + return _device.get_filter_names(direction); + } + + filter_info_base::sptr get_filter(const std::string &which, const std::string &filter_name) + { + boost::lock_guard<boost::mutex> lock(_mutex); + + ad9361_device_t::direction_t direction = _get_direction_from_antenna(which); + ad9361_device_t::chain_t chain =_get_chain_from_antenna(which); + return _device.get_filter(direction, chain, filter_name); + } + + void set_filter(const std::string &which, const std::string &filter_name, const filter_info_base::sptr filter) + { + boost::lock_guard<boost::mutex> lock(_mutex); + + ad9361_device_t::direction_t direction = _get_direction_from_antenna(which); + ad9361_device_t::chain_t chain = _get_chain_from_antenna(which); + _device.set_filter(direction, chain, filter_name, filter); + } + private: static ad9361_device_t::direction_t _get_direction_from_antenna(const std::string& antenna) { diff --git a/host/lib/usrp/common/ad9361_ctrl.hpp b/host/lib/usrp/common/ad9361_ctrl.hpp index b7d7b8e26..ac0404b24 100644 --- a/host/lib/usrp/common/ad9361_ctrl.hpp +++ b/host/lib/usrp/common/ad9361_ctrl.hpp @@ -22,9 +22,13 @@ #include <uhd/types/ranges.hpp> #include <uhd/types/serial.hpp> #include <uhd/types/sensors.hpp> +#include <uhd/exception.hpp> #include <boost/shared_ptr.hpp> #include <ad9361_device.h> #include <string> +#include <complex> +#include <uhd/types/filters.hpp> +#include <vector> namespace uhd { namespace usrp { @@ -77,15 +81,18 @@ public: return uhd::meta_range_t(5e6, ad9361_device_t::AD9361_MAX_CLOCK_RATE); //5 MHz DCM low end } - //! set the filter bandwidth for the frontend - double set_bw_filter(const std::string &/*which*/, const double /*bw*/) - { - return 56e6; //TODO - } + //! set the filter bandwidth for the frontend's analog low pass + virtual double set_bw_filter(const std::string &/*which*/, const double /*bw*/) = 0; //! set the gain for a particular gain element virtual double set_gain(const std::string &which, const double value) = 0; + //! Enable or disable the AGC module + virtual void set_agc(const std::string &which, bool enable) = 0; + + //! configure the AGC module to slow or fast mode + virtual void set_agc_mode(const std::string &which, const std::string &mode) = 0; + //! set a new clock rate, return the exact value virtual double set_clock_rate(const double rate) = 0; @@ -95,14 +102,46 @@ public: //! tune the given frontend, return the exact value virtual double tune(const std::string &which, const double value) = 0; + //! set the DC offset for I and Q manually + void set_dc_offset(const std::string &, const std::complex<double>) + { + //This feature should not be used according to Analog Devices + throw uhd::runtime_error("ad9361_ctrl::set_dc_offset this feature is not supported on this device."); + } + + //! enable or disable the BB/RF DC tracking feature + virtual void set_dc_offset_auto(const std::string &which, const bool on) = 0; + + //! set the IQ correction value manually + void set_iq_balance(const std::string &, const std::complex<double>) + { + //This feature should not be used according to Analog Devices + throw uhd::runtime_error("ad9361_ctrl::set_iq_balance this feature is not supported on this device."); + } + + //! enable or disable the quadrature calibration + virtual void set_iq_balance_auto(const std::string &which, const bool on) = 0; + //! get the current frequency for the given frontend virtual double get_freq(const std::string &which) = 0; - //! turn on/off data port loopback + //! turn on/off Catalina's data port loopback virtual void data_port_loopback(const bool on) = 0; //! read internal RSSI sensor virtual sensor_value_t get_rssi(const std::string &which) = 0; + + //! read the internal temp sensor + virtual sensor_value_t get_temperature() = 0; + + //! List all available filters by name + virtual std::vector<std::string> get_filter_names(const std::string &which) = 0; + + //! Return a list of all filters + virtual filter_info_base::sptr get_filter(const std::string &which, const std::string &filter_name) = 0; + + //! Write back a filter + virtual void set_filter(const std::string &which, const std::string &filter_name, const filter_info_base::sptr) = 0; }; }} diff --git a/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp b/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp index db5de52d0..00534c305 100644 --- a/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp +++ b/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp @@ -11,6 +11,7 @@ #include <cmath> #include <uhd/exception.hpp> #include <uhd/utils/log.hpp> +#include <uhd/utils/msg.hpp> #include <boost/cstdint.hpp> #include <boost/date_time/posix_time/posix_time.hpp> #include <boost/thread/thread.hpp> @@ -78,6 +79,7 @@ int get_num_taps(int max_num_taps) { const double ad9361_device_t::AD9361_MAX_GAIN = 89.75; const double ad9361_device_t::AD9361_MAX_CLOCK_RATE = 61.44e6; +const double ad9361_device_t::AD9361_CAL_VALID_WINDOW = 100e6; // Max bandwdith is due to filter rolloff in analog filter stage const double ad9361_device_t::AD9361_RECOMMENDED_MAX_BANDWIDTH = 56e6; @@ -87,7 +89,7 @@ const double ad9361_device_t::AD9361_RECOMMENDED_MAX_BANDWIDTH = 56e6; * how many taps are in the filter, and given a vector of the taps * themselves. */ -void ad9361_device_t::_program_fir_filter(direction_t direction, int num_taps, boost::uint16_t *coeffs) +void ad9361_device_t::_program_fir_filter(direction_t direction, chain_t chain, int num_taps, boost::uint16_t *coeffs) { boost::uint16_t base; @@ -102,8 +104,20 @@ void ad9361_device_t::_program_fir_filter(direction_t direction, int num_taps, b /* Encode number of filter taps for programming register */ boost::uint8_t reg_numtaps = (((num_taps / 16) - 1) & 0x07) << 5; + boost::uint8_t reg_chain = 0; + switch (chain) { + case CHAIN_1: + reg_chain = 0x01 << 3; + break; + case CHAIN_2: + reg_chain = 0x02 << 3; + break; + default: + reg_chain = 0x03 << 3; + } + /* Turn on the filter clock. */ - _io_iface->poke8(base + 5, reg_numtaps | 0x1a); + _io_iface->poke8(base + 5, reg_numtaps | reg_chain | 0x02); boost::this_thread::sleep(boost::posix_time::milliseconds(1)); /* Zero the unused taps just in case they have stale data */ @@ -112,7 +126,7 @@ void ad9361_device_t::_program_fir_filter(direction_t direction, int num_taps, b _io_iface->poke8(base + 0, addr); _io_iface->poke8(base + 1, 0x0); _io_iface->poke8(base + 2, 0x0); - _io_iface->poke8(base + 5, reg_numtaps | 0x1e); + _io_iface->poke8(base + 5, reg_numtaps | reg_chain | (1 << 1) | (1 << 2)); _io_iface->poke8(base + 4, 0x00); _io_iface->poke8(base + 4, 0x00); } @@ -122,7 +136,7 @@ void ad9361_device_t::_program_fir_filter(direction_t direction, int num_taps, b _io_iface->poke8(base + 0, addr); _io_iface->poke8(base + 1, (coeffs[addr]) & 0xff); _io_iface->poke8(base + 2, (coeffs[addr] >> 8) & 0xff); - _io_iface->poke8(base + 5, reg_numtaps | 0x1e); + _io_iface->poke8(base + 5, reg_numtaps | reg_chain | (1 << 1) | (1 << 2)); _io_iface->poke8(base + 4, 0x00); _io_iface->poke8(base + 4, 0x00); } @@ -133,9 +147,9 @@ void ad9361_device_t::_program_fir_filter(direction_t direction, int num_taps, b before the clock stops. Wait 4 sample clock periods after setting D2 high while that data writes into the table" */ - _io_iface->poke8(base + 5, reg_numtaps | 0x1A); + _io_iface->poke8(base + 5, reg_numtaps | reg_chain | (1 << 1)); if (direction == RX) { - _io_iface->poke8(base + 5, reg_numtaps | 0x18); + _io_iface->poke8(base + 5, reg_numtaps | reg_chain ); /* Rx Gain, set to prevent digital overflow/saturation in filters 0:+6dB, 1:0dB, 2:-6dB, 3:-12dB page 35 of UG-671 */ @@ -144,7 +158,7 @@ void ad9361_device_t::_program_fir_filter(direction_t direction, int num_taps, b /* Tx Gain. bit[0]. set to prevent digital overflow/saturation in filters 0: 0dB, 1:-6dB page 25 of UG-671 */ - _io_iface->poke8(base + 5, reg_numtaps | 0x18); + _io_iface->poke8(base + 5, reg_numtaps | reg_chain ); } } @@ -175,7 +189,7 @@ void ad9361_device_t::_setup_rx_fir(size_t num_taps, boost::int32_t decimation) } } - _program_fir_filter(RX, num_taps, coeffs.get()); + _program_fir_filter(RX, CHAIN_BOTH, num_taps, coeffs.get()); } /* Program the TX FIR Filter. */ @@ -207,7 +221,7 @@ void ad9361_device_t::_setup_tx_fir(size_t num_taps, boost::int32_t interpolatio } } - _program_fir_filter(TX, num_taps, coeffs.get()); + _program_fir_filter(TX, CHAIN_BOTH, num_taps, coeffs.get()); } /*********************************************************************** @@ -282,16 +296,24 @@ void ad9361_device_t::_calibrate_synth_charge_pumps() * * Note that the filter calibration depends heavily on the baseband * bandwidth, so this must be re-done after any change to the RX sample - * rate. */ -double ad9361_device_t::_calibrate_baseband_rx_analog_filter() + * rate. + * UG570 Page 33 states that this filter should be calibrated to 1.4 * bbbw*/ +double ad9361_device_t::_calibrate_baseband_rx_analog_filter(double req_rfbw) { - /* For filter tuning, baseband BW is half the complex BW, and must be - * between 28e6 and 0.2e6. */ - double bbbw = _baseband_bw / 2.0; + double bbbw = req_rfbw / 2.0; + if(bbbw > _baseband_bw / 2.0) + { + UHD_LOG << "baseband bandwidth too large for current sample rate. Setting bandwidth to: "<<_baseband_bw; + bbbw = _baseband_bw / 2.0; + } + + /* Baseband BW must be between 28e6 and 0.143e6. + * Max filter BW is 39.2 MHz. 39.2 / 1.4 = 28 + * Min filter BW is 200kHz. 200 / 1.4 = 143 */ if (bbbw > 28e6) { bbbw = 28e6; - } else if (bbbw < 0.20e6) { - bbbw = 0.20e6; + } else if (bbbw < 0.143e6) { + bbbw = 0.143e6; } double rxtune_clk = ((1.4 * bbbw * 2 * M_PI) / M_LN2); @@ -340,16 +362,25 @@ double ad9361_device_t::_calibrate_baseband_rx_analog_filter() * * Note that the filter calibration depends heavily on the baseband * bandwidth, so this must be re-done after any change to the TX sample - * rate. */ -double ad9361_device_t::_calibrate_baseband_tx_analog_filter() + * rate. + * UG570 Page 32 states that this filter should be calibrated to 1.6 * bbbw*/ +double ad9361_device_t::_calibrate_baseband_tx_analog_filter(double req_rfbw) { - /* For filter tuning, baseband BW is half the complex BW, and must be - * between 28e6 and 0.2e6. */ - double bbbw = _baseband_bw / 2.0; + double bbbw = req_rfbw / 2.0; + + if(bbbw > _baseband_bw / 2.0) + { + UHD_LOG << "baseband bandwidth too large for current sample rate. Setting bandwidth to: "<<_baseband_bw; + bbbw = _baseband_bw / 2.0; + } + + /* Baseband BW must be between 20e6 and 0.391e6. + * Max filter BW is 32 MHz. 32 / 1.6 = 20 + * Min filter BW is 625 kHz. 625 / 1.6 = 391 */ if (bbbw > 20e6) { bbbw = 20e6; - } else if (bbbw < 0.625e6) { - bbbw = 0.625e6; + } else if (bbbw < 0.391e6) { + bbbw = 0.391e6; } double txtune_clk = ((1.6 * bbbw * 2 * M_PI) / M_LN2); @@ -386,16 +417,25 @@ double ad9361_device_t::_calibrate_baseband_tx_analog_filter() /* Calibrate the secondary TX filter. * * This filter also depends on the TX sample rate, so if a rate change is - * made, the previous calibration will no longer be valid. */ -void ad9361_device_t::_calibrate_secondary_tx_filter() + * made, the previous calibration will no longer be valid. + * UG570 Page 32 states that this filter should be calibrated to 5 * bbbw*/ +double ad9361_device_t::_calibrate_secondary_tx_filter(double req_rfbw) { - /* For filter tuning, baseband BW is half the complex BW, and must be - * between 20e6 and 0.53e6. */ - double bbbw = _baseband_bw / 2.0; + double bbbw = req_rfbw / 2.0; + + if(bbbw > _baseband_bw / 2.0) + { + UHD_LOG << "baseband bandwidth too large for current sample rate. Setting bandwidth to: "<<_baseband_bw; + bbbw = _baseband_bw / 2.0; + } + + /* Baseband BW must be between 20e6 and 0.54e6. + * Max filter BW is 100 MHz. 100 / 5 = 20 + * Min filter BW is 2.7 MHz. 2.7 / 5 = 0.54 */ if (bbbw > 20e6) { bbbw = 20e6; - } else if (bbbw < 0.53e6) { - bbbw = 0.53e6; + } else if (bbbw < 0.54e6) { + bbbw = 0.54e6; } double bbbw_mhz = bbbw / 1e6; @@ -456,13 +496,17 @@ void ad9361_device_t::_calibrate_secondary_tx_filter() _io_iface->poke8(0x0d2, reg0d2); _io_iface->poke8(0x0d1, reg0d1); _io_iface->poke8(0x0d0, reg0d0); + + return bbbw; } /* Calibrate the RX TIAs. * * Note that the values in the TIA register, after calibration, vary with - * the RX gain settings. */ -void ad9361_device_t::_calibrate_rx_TIAs() + * the RX gain settings. + * We do not really program the BW here. Most settings are taken form the BB LPF registers + * UG570 page 33 states that this filter should be calibrated to 2.5 * bbbw */ +double ad9361_device_t::_calibrate_rx_TIAs(double req_rfbw) { boost::uint8_t reg1eb = _io_iface->peek8(0x1eb) & 0x3F; boost::uint8_t reg1ec = _io_iface->peek8(0x1ec) & 0x7F; @@ -473,13 +517,21 @@ void ad9361_device_t::_calibrate_rx_TIAs() boost::uint8_t reg1de = 0x00; boost::uint8_t reg1df = 0x00; - /* For calibration, baseband BW is half the complex BW, and must be - * between 28e6 and 0.2e6. */ - double bbbw = _baseband_bw / 2.0; - if (bbbw > 20e6) { - bbbw = 20e6; - } else if (bbbw < 0.20e6) { - bbbw = 0.20e6; + double bbbw = req_rfbw / 2.0; + + if(bbbw > _baseband_bw / 2.0) + { + UHD_LOG << "baseband bandwidth too large for current sample rate. Setting bandwidth to: "<<_baseband_bw; + bbbw = _baseband_bw / 2.0; + } + + /* Baseband BW must be between 28e6 and 0.4e6. + * Max filter BW is 70 MHz. 70 / 2.5 = 28 + * Min filter BW is 1 MHz. 1 / 2.5 = 0.4*/ + if (bbbw > 28e6) { + bbbw = 28e6; + } else if (bbbw < 0.40e6) { + bbbw = 0.40e6; } double ceil_bbbw_mhz = std::ceil(bbbw / 1e6); @@ -520,6 +572,8 @@ void ad9361_device_t::_calibrate_rx_TIAs() _io_iface->poke8(0x1df, reg1df); _io_iface->poke8(0x1dc, reg1dc); _io_iface->poke8(0x1de, reg1de); + + return bbbw; } /* Setup the AD9361 ADC. @@ -651,11 +705,12 @@ void ad9361_device_t::_setup_adc() } /* Calibrate the baseband DC offset. - * - * Note that this function is called from within the TX quadrature - * calibration function! */ + * Disables tracking + */ void ad9361_device_t::_calibrate_baseband_dc_offset() { + _io_iface->poke8(0x18b, 0x83); //Reset RF DC tracking flag + _io_iface->poke8(0x193, 0x3f); // Calibration settings _io_iface->poke8(0x190, 0x0f); // Set tracking coefficient //write_ad9361_reg(device, 0x190, /*0x0f*//*0xDF*/0x80*1 | 0x40*1 | (16+8/*+4*/)); // Set tracking coefficient: don't *4 counter, do decim /4, increased gain shift @@ -675,9 +730,8 @@ void ad9361_device_t::_calibrate_baseband_dc_offset() } /* Calibrate the RF DC offset. - * - * Note that this function is called from within the TX quadrature - * calibration function. */ + * Disables tracking + */ void ad9361_device_t::_calibrate_rf_dc_offset() { /* Some settings are frequency-dependent. */ @@ -692,7 +746,7 @@ void ad9361_device_t::_calibrate_rf_dc_offset() } _io_iface->poke8(0x185, 0x20); // RF DC Offset wait count - _io_iface->poke8(0x18b, 0x83); + _io_iface->poke8(0x18b, 0x83); // Disable tracking _io_iface->poke8(0x189, 0x30); /* Run the calibration! */ @@ -708,6 +762,16 @@ void ad9361_device_t::_calibrate_rf_dc_offset() } } +void ad9361_device_t::_configure_bb_rf_dc_tracking(const bool on) +{ + if(on) + { + _io_iface->poke8(0x18b, 0xad); // Enable BB and RF DC tracking + } else { + _io_iface->poke8(0x18b, 0x83); // Disable BB and RF DC tracking + } +} + /* Start the RX quadrature calibration. * * Note that we are using AD9361's 'tracking' feature for RX quadrature @@ -719,17 +783,21 @@ void ad9361_device_t::_calibrate_rx_quadrature() _io_iface->poke8(0x168, 0x03); // Set tone level for cal _io_iface->poke8(0x16e, 0x25); // RX Gain index to use for cal _io_iface->poke8(0x16a, 0x75); // Set Kexp phase - _io_iface->poke8(0x16b, 0x15); // Set Kexp amplitude - _io_iface->poke8(0x169, 0xcf); // Continuous tracking mode - _io_iface->poke8(0x18b, 0xad); + _io_iface->poke8(0x16b, 0x95); // Set Kexp amplitude + + if(_use_iq_balance_correction) + { + _io_iface->poke8(0x169, 0xcf); // Continuous tracking mode. Gets disabled in _tx_quadrature_cal_routine! + } } -/* TX quadtrature calibration routine. +/* TX quadrature calibration routine. * * The TX quadrature needs to be done twice, once for each TX chain, with * only one register change in between. Thus, this function enacts the * calibrations, and it is called from calibrate_tx_quadrature. */ void ad9361_device_t::_tx_quadrature_cal_routine() { + /* This is a weird process, but here is how it works: * 1) Read the calibrated NCO frequency bits out of 0A3. * 2) Write the two bits to the RX NCO freq part of 0A0. @@ -765,7 +833,7 @@ void ad9361_device_t::_tx_quadrature_cal_routine() { /* The gain table index used for calibration must be adjusted for the * mid-table to get a TIA index = 1 and LPF index = 0. */ - if ((_rx_freq >= 1300e6) && (_rx_freq < 4000e6)) { + if (_rx_freq < 1300e6) { _io_iface->poke8(0x0aa, 0x22); // Cal gain table index } else { _io_iface->poke8(0x0aa, 0x25); // Cal gain table index @@ -774,12 +842,6 @@ void ad9361_device_t::_tx_quadrature_cal_routine() { _io_iface->poke8(0x0a4, 0xf0); // Cal setting conut _io_iface->poke8(0x0ae, 0x00); // Cal LPF gain index (split mode) - /* First, calibrate the baseband DC offset. */ - _calibrate_baseband_dc_offset(); - - /* Second, calibrate the RF DC offset. */ - _calibrate_rf_dc_offset(); - /* Now, calibrate the TX quadrature! */ size_t count = 0; _io_iface->poke8(0x016, 0x10); @@ -794,9 +856,7 @@ void ad9361_device_t::_tx_quadrature_cal_routine() { } /* Run the TX quadrature calibration. - * - * Note that from within this function we are also triggering the baseband - * and RF DC calibrations. */ + */ void ad9361_device_t::_calibrate_tx_quadrature() { /* Make sure we are, in fact, in the ALERT state. If not, something is @@ -880,7 +940,7 @@ void ad9361_device_t::_program_mixer_gm_subtable() void ad9361_device_t::_program_gain_table() { /* Figure out which gain table we should be using for our current * frequency band. */ - boost::uint8_t (*gain_table)[5] = NULL; + boost::uint8_t (*gain_table)[3] = NULL; boost::uint8_t new_gain_table; if (_rx_freq < 1300e6) { gain_table = gain_table_sub_1300mhz; @@ -911,9 +971,9 @@ void ad9361_device_t::_program_gain_table() { boost::uint8_t index = 0; for (; index < 77; index++) { _io_iface->poke8(0x130, index); - _io_iface->poke8(0x131, gain_table[index][1]); - _io_iface->poke8(0x132, gain_table[index][2]); - _io_iface->poke8(0x133, gain_table[index][3]); + _io_iface->poke8(0x131, gain_table[index][0]); + _io_iface->poke8(0x132, gain_table[index][1]); + _io_iface->poke8(0x133, gain_table[index][2]); _io_iface->poke8(0x137, 0x1E); _io_iface->poke8(0x134, 0x00); _io_iface->poke8(0x134, 0x00); @@ -939,28 +999,58 @@ void ad9361_device_t::_program_gain_table() { /* Setup gain control registers. * - * This really only needs to be done once, at initialization. */ -void ad9361_device_t::_setup_gain_control() + * This really only needs to be done once, at initialization. + * If AGC is used the mode select bits (Reg 0x0FA) must be written manually */ +void ad9361_device_t::_setup_gain_control(bool agc) { - _io_iface->poke8(0x0FA, 0xE0); // Gain Control Mode Select - _io_iface->poke8(0x0FB, 0x08); // Table, Digital Gain, Man Gain Ctrl - _io_iface->poke8(0x0FC, 0x23); // Incr Step Size, ADC Overrange Size - _io_iface->poke8(0x0FD, 0x4C); // Max Full/LMT Gain Table Index - _io_iface->poke8(0x0FE, 0x44); // Decr Step Size, Peak Overload Time - _io_iface->poke8(0x100, 0x6F); // Max Digital Gain - _io_iface->poke8(0x104, 0x2F); // ADC Small Overload Threshold - _io_iface->poke8(0x105, 0x3A); // ADC Large Overload Threshold - _io_iface->poke8(0x107, 0x31); // Large LMT Overload Threshold - _io_iface->poke8(0x108, 0x39); // Small LMT Overload Threshold - _io_iface->poke8(0x109, 0x23); // Rx1 Full/LMT Gain Index - _io_iface->poke8(0x10A, 0x58); // Rx1 LPF Gain Index - _io_iface->poke8(0x10B, 0x00); // Rx1 Digital Gain Index - _io_iface->poke8(0x10C, 0x23); // Rx2 Full/LMT Gain Index - _io_iface->poke8(0x10D, 0x18); // Rx2 LPF Gain Index - _io_iface->poke8(0x10E, 0x00); // Rx2 Digital Gain Index - _io_iface->poke8(0x114, 0x30); // Low Power Threshold - _io_iface->poke8(0x11A, 0x27); // Initial LMT Gain Limit - _io_iface->poke8(0x081, 0x00); // Tx Symbol Gain Control + /* The AGC mode configuration should be good for all cases. + * However, non AGC configuration still used for backward compatibility. */ + if (agc) { + /*mode select bits must be written before hand!*/ + _io_iface->poke8(0x0FB, 0x08); // Table, Digital Gain, Man Gain Ctrl + _io_iface->poke8(0x0FC, 0x23); // Incr Step Size, ADC Overrange Size + _io_iface->poke8(0x0FD, 0x4C); // Max Full/LMT Gain Table Index + _io_iface->poke8(0x0FE, 0x44); // Decr Step Size, Peak Overload Time + _io_iface->poke8(0x100, 0x6F); // Max Digital Gain + _io_iface->poke8(0x101, 0x0A); // Max Digital Gain + _io_iface->poke8(0x103, 0x08); // Max Digital Gain + _io_iface->poke8(0x104, 0x2F); // ADC Small Overload Threshold + _io_iface->poke8(0x105, 0x3A); // ADC Large Overload Threshold + _io_iface->poke8(0x106, 0x22); // Max Digital Gain + _io_iface->poke8(0x107, 0x2B); // Large LMT Overload Threshold + _io_iface->poke8(0x108, 0x31); + _io_iface->poke8(0x111, 0x0A); + _io_iface->poke8(0x11A, 0x1C); + _io_iface->poke8(0x120, 0x0C); + _io_iface->poke8(0x121, 0x44); + _io_iface->poke8(0x122, 0x44); + _io_iface->poke8(0x123, 0x11); + _io_iface->poke8(0x124, 0xF5); + _io_iface->poke8(0x125, 0x3B); + _io_iface->poke8(0x128, 0x03); + _io_iface->poke8(0x129, 0x56); + _io_iface->poke8(0x12A, 0x22); + } else { + _io_iface->poke8(0x0FA, 0xE0); // Gain Control Mode Select + _io_iface->poke8(0x0FB, 0x08); // Table, Digital Gain, Man Gain Ctrl + _io_iface->poke8(0x0FC, 0x23); // Incr Step Size, ADC Overrange Size + _io_iface->poke8(0x0FD, 0x4C); // Max Full/LMT Gain Table Index + _io_iface->poke8(0x0FE, 0x44); // Decr Step Size, Peak Overload Time + _io_iface->poke8(0x100, 0x6F); // Max Digital Gain + _io_iface->poke8(0x104, 0x2F); // ADC Small Overload Threshold + _io_iface->poke8(0x105, 0x3A); // ADC Large Overload Threshold + _io_iface->poke8(0x107, 0x31); // Large LMT Overload Threshold + _io_iface->poke8(0x108, 0x39); // Small LMT Overload Threshold + _io_iface->poke8(0x109, 0x23); // Rx1 Full/LMT Gain Index + _io_iface->poke8(0x10A, 0x58); // Rx1 LPF Gain Index + _io_iface->poke8(0x10B, 0x00); // Rx1 Digital Gain Index + _io_iface->poke8(0x10C, 0x23); // Rx2 Full/LMT Gain Index + _io_iface->poke8(0x10D, 0x18); // Rx2 LPF Gain Index + _io_iface->poke8(0x10E, 0x00); // Rx2 Digital Gain Index + _io_iface->poke8(0x114, 0x30); // Low Power Threshold + _io_iface->poke8(0x11A, 0x27); // Initial LMT Gain Limit + _io_iface->poke8(0x081, 0x00); // Tx Symbol Gain Control + } } /* Setup the RX or TX synthesizers. @@ -1257,6 +1347,7 @@ double ad9361_device_t::_setup_rates(const double rate) int divfactor = 0; _tfir_factor = 0; _rfir_factor = 0; + if (rate < 0.33e6) { // RX1 + RX2 enabled, 3, 2, 2, 4 _regs.rxfilt = B8(11101111); @@ -1412,6 +1503,19 @@ void ad9361_device_t::initialize() _rx2_gain = 0; _tx1_gain = 0; _tx2_gain = 0; + _use_dc_offset_correction = true; + _use_iq_balance_correction = true; + _rx1_agc_mode = GAIN_MODE_SLOW_AGC; + _rx2_agc_mode = GAIN_MODE_SLOW_AGC; + _rx1_agc_enable = false; + _rx2_agc_enable = false; + _last_calibration_freq = -AD9361_CAL_VALID_WINDOW; + _rx_analog_bw = 0; + _tx_analog_bw = 0; + _rx_tia_lp_bw = 0; + _tx_sec_lp_bw = 0; + _rx_bb_lp_bw = 0; + _tx_bb_lp_bw = 0; /* Reset the device. */ _io_iface->poke8(0x000, 0x01); @@ -1490,7 +1594,6 @@ void ad9361_device_t::initialize() _io_iface->poke8(0x019, 0x00); // AuxDAC2 Word[9:2] _io_iface->poke8(0x01A, 0x00); // AuxDAC1 Config and Word[1:0] _io_iface->poke8(0x01B, 0x00); // AuxDAC2 Config and Word[1:0] - _io_iface->poke8(0x022, 0x4A); // Invert Bypassed LNA _io_iface->poke8(0x023, 0xFF); // AuxDAC Manaul/Auto Control _io_iface->poke8(0x026, 0x00); // AuxDAC Manual Select Bit/GPO Manual Select _io_iface->poke8(0x030, 0x00); // AuxDAC1 Rx Delay @@ -1498,10 +1601,18 @@ void ad9361_device_t::initialize() _io_iface->poke8(0x032, 0x00); // AuxDAC2 Rx Delay _io_iface->poke8(0x033, 0x00); // AuxDAC2 Tx Delay + /* LNA bypass polarity inversion + * According to the register map, we should invert the bypass path to + * match LNA phase. Extensive testing, however, shows otherwise and that + * to align bypass and LNA phases, the bypass inversion switch should be + * turned off. + */ + _io_iface->poke8(0x022, 0x0A); + /* Setup AuxADC */ _io_iface->poke8(0x00B, 0x00); // Temp Sensor Setup (Offset) _io_iface->poke8(0x00C, 0x00); // Temp Sensor Setup (Temp Window) - _io_iface->poke8(0x00D, 0x03); // Temp Sensor Setup (Periodic Measure) + _io_iface->poke8(0x00D, 0x00); // Temp Sensor Setup (Manual Measure) _io_iface->poke8(0x00F, 0x04); // Temp Sensor Setup (Decimation) _io_iface->poke8(0x01C, 0x10); // AuxADC Setup (Clock Div) _io_iface->poke8(0x01D, 0x01); // AuxADC Setup (Decimation/Enable) @@ -1555,17 +1666,18 @@ void ad9361_device_t::initialize() _program_mixer_gm_subtable(); _program_gain_table(); - _setup_gain_control(); + _setup_gain_control(false); - _calibrate_baseband_rx_analog_filter(); - _calibrate_baseband_tx_analog_filter(); - _calibrate_rx_TIAs(); - _calibrate_secondary_tx_filter(); + set_bw_filter(RX, _baseband_bw); + set_bw_filter(TX, _baseband_bw); _setup_adc(); + _calibrate_baseband_dc_offset(); + _calibrate_rf_dc_offset(); _calibrate_tx_quadrature(); _calibrate_rx_quadrature(); + _configure_bb_rf_dc_tracking(_use_dc_offset_correction); // cals done, set PPORT config switch (_client_params->get_digital_interface_mode()) { @@ -1680,18 +1792,19 @@ double ad9361_device_t::set_clock_rate(const double req_rate) _program_mixer_gm_subtable(); _program_gain_table(); - _setup_gain_control(); + _setup_gain_control(false); _reprogram_gains(); - _calibrate_baseband_rx_analog_filter(); - _calibrate_baseband_tx_analog_filter(); - _calibrate_rx_TIAs(); - _calibrate_secondary_tx_filter(); + set_bw_filter(RX, _baseband_bw); + set_bw_filter(TX, _baseband_bw); _setup_adc(); + _calibrate_baseband_dc_offset(); + _calibrate_rf_dc_offset(); _calibrate_tx_quadrature(); _calibrate_rx_quadrature(); + _configure_bb_rf_dc_tracking(_use_dc_offset_correction); // cals done, set PPORT config switch (_client_params->get_digital_interface_mode()) { @@ -1843,9 +1956,16 @@ double ad9361_device_t::tune(direction_t direction, const double value) /* Update the gain settings. */ _reprogram_gains(); - /* Run the calibration algorithms. */ - _calibrate_tx_quadrature(); - _calibrate_rx_quadrature(); + /* Only run the following calibrations if we are more than 100MHz away + * from the previous calibration point. */ + if (std::abs(_last_calibration_freq - tune_freq) > AD9361_CAL_VALID_WINDOW) { + /* Run the calibration algorithms. */ + _calibrate_rf_dc_offset(); + _calibrate_tx_quadrature(); + _calibrate_rx_quadrature(); + _configure_bb_rf_dc_tracking(_use_dc_offset_correction); + _last_calibration_freq = tune_freq; + } /* If we were in the FDD state, return it now. */ if (not_in_alert) { @@ -1960,4 +2080,678 @@ double ad9361_device_t::get_rssi(chain_t chain) return rssi; } +/* + * Returns the reading of the internal temperature sensor. + * One point calibration of the sensor was done according to datasheet + * leading to the given default constant correction factor. + */ +double ad9361_device_t::_get_temperature(const double cal_offset, const double timeout) +{ + //set 0x01D[0] to 1 to disable AuxADC GPIO reading + boost::uint8_t tmp = 0; + tmp = _io_iface->peek8(0x01D); + _io_iface->poke8(0x01D, (tmp | 0x01)); + _io_iface->poke8(0x00B, 0); //set offset to 0 + + _io_iface->poke8(0x00C, 0x01); //start reading, clears bit 0x00C[1] + boost::posix_time::ptime start_time = boost::posix_time::microsec_clock::local_time(); + boost::posix_time::time_duration elapsed; + //wait for valid data (toggle of bit 1 in 0x00C) + while(((_io_iface->peek8(0x00C) >> 1) & 0x01) == 0) { + boost::this_thread::sleep(boost::posix_time::microseconds(100)); + elapsed = boost::posix_time::microsec_clock::local_time() - start_time; + if(elapsed.total_milliseconds() > (timeout*1000)) + { + throw uhd::runtime_error("[ad9361_device_t] timeout while reading temperature"); + } + } + _io_iface->poke8(0x00C, 0x00); //clear read flag + + boost::uint8_t temp = _io_iface->peek8(0x00E); //read temperature. + double tmp_temp = temp/1.140f; //according to ADI driver + tmp_temp = tmp_temp + cal_offset; //Constant offset acquired by one point calibration. + + return tmp_temp; +} + +double ad9361_device_t::get_average_temperature(const double cal_offset, const size_t num_samples) +{ + double d_temp = 0; + for(size_t i = 0; i < num_samples; i++) { + double tmp_temp = _get_temperature(cal_offset); + d_temp += (tmp_temp/num_samples); + } + return d_temp; +} + +void ad9361_device_t::set_dc_offset_auto(direction_t direction, const bool on) +{ + if(direction == RX) + { + _use_dc_offset_correction = on; + _configure_bb_rf_dc_tracking(_use_dc_offset_correction); + if(on) + { + _io_iface->poke8(0x182, (_io_iface->peek8(0x182) & (~((1 << 7) | (1 << 6) | (1 << 3) | (1 << 2))))); //Clear force bits + //Do a single shot DC offset cal before enabling tracking (Not possible if not in ALERT state. Is it necessary?) + } else { + //clear current config values + _io_iface->poke8(0x182, (_io_iface->peek8(0x182) | ((1 << 7) | (1 << 6) | (1 << 3) | (1 << 2)))); //Set input A and input B&C force enable bits + _io_iface->poke8(0x174, 0x00); + _io_iface->poke8(0x175, 0x00); + _io_iface->poke8(0x176, 0x00); + _io_iface->poke8(0x177, 0x00); + _io_iface->poke8(0x178, 0x00); + _io_iface->poke8(0x17D, 0x00); + _io_iface->poke8(0x17E, 0x00); + _io_iface->poke8(0x17F, 0x00); + _io_iface->poke8(0x180, 0x00); + _io_iface->poke8(0x181, 0x00); + } + } else { + // DC offset is removed during TX quad cal + throw uhd::runtime_error("[ad9361_device_t] [set_iq_balance_auto] INVALID_CODE_PATH"); + } +} + +void ad9361_device_t::set_iq_balance_auto(direction_t direction, const bool on) +{ + if(direction == RX) + { + _use_iq_balance_correction = on; + if(on) + { + //disable force registers and enable tracking + _io_iface->poke8(0x182, (_io_iface->peek8(0x182) & (~ ( (1<<1) | (1<<0) | (1<<5) | (1<<4) )))); + _calibrate_rx_quadrature(); + } else { + //disable IQ tracking + _io_iface->poke8(0x169, 0xc0); + //clear current config values + _io_iface->poke8(0x182, (_io_iface->peek8(0x182) | ((1 << 1) | (1 << 0) | (1 << 5) | (1 << 4)))); //Set Rx2 input B&C force enable bit + _io_iface->poke8(0x17B, 0x00); + _io_iface->poke8(0x17C, 0x00); + _io_iface->poke8(0x179, 0x00); + _io_iface->poke8(0x17A, 0x00); + _io_iface->poke8(0x170, 0x00); + _io_iface->poke8(0x171, 0x00); + _io_iface->poke8(0x172, 0x00); + _io_iface->poke8(0x173, 0x00); + } + } else { + throw uhd::runtime_error("[ad9361_device_t] [set_iq_balance_auto] INVALID_CODE_PATH"); + } +} + +/* Sets the RX gain mode to be used. + * If a transition from an AGC to an non AGC mode occurs (or vice versa) + * the gain configuration will be reloaded. */ +void ad9361_device_t::_setup_agc(chain_t chain, gain_mode_t gain_mode) +{ + boost::uint8_t gain_mode_reg = 0; + boost::uint8_t gain_mode_prev = 0; + boost::uint8_t gain_mode_bits_pos = 0; + + gain_mode_reg = _io_iface->peek8(0x0FA); + gain_mode_prev = (gain_mode_reg & 0x0F); + + if (chain == CHAIN_1) { + gain_mode_bits_pos = 0; + } else if (chain == CHAIN_2) { + gain_mode_bits_pos = 2; + } else + { + throw uhd::runtime_error("[ad9361_device_t] Wrong value for chain"); + } + + gain_mode_reg = (gain_mode_reg & (~(0x03<<gain_mode_bits_pos))); //clear mode bits + switch (gain_mode) { + case GAIN_MODE_MANUAL: + //leave bits cleared + break; + case GAIN_MODE_SLOW_AGC: + gain_mode_reg = (gain_mode_reg | (0x02<<gain_mode_bits_pos)); + break; + case GAIN_MODE_FAST_AGC: + gain_mode_reg = (gain_mode_reg | (0x01<<gain_mode_bits_pos)); + break; + default: + throw uhd::runtime_error("[ad9361_device_t] Gain mode does not exist"); + } + _io_iface->poke8(0x0FA, gain_mode_reg); + boost::uint8_t gain_mode_status = _io_iface->peek8(0x0FA); + gain_mode_status = (gain_mode_status & 0x0F); + /*Check if gain mode configuration needs to be reprogrammed*/ + if (((gain_mode_prev == 0) && (gain_mode_status != 0)) || ((gain_mode_prev != 0) && (gain_mode_status == 0))) { + if (gain_mode_status == 0) { + /*load manual mode config*/ + _setup_gain_control(false); + } else { + /*load agc mode config*/ + _setup_gain_control(true); + } + } +} + +void ad9361_device_t::set_agc(chain_t chain, bool enable) +{ + if(chain == CHAIN_1) { + _rx1_agc_enable = enable; + if(enable) { + _setup_agc(chain, _rx1_agc_mode); + } else { + _setup_agc(chain, GAIN_MODE_MANUAL); + } + } else if (chain == CHAIN_2){ + _rx2_agc_enable = enable; + if(enable) { + _setup_agc(chain, _rx2_agc_mode); + } else { + _setup_agc(chain, GAIN_MODE_MANUAL); + } + } else + { + throw uhd::runtime_error("[ad9361_device_t] Wrong value for chain"); + } +} + +void ad9361_device_t::set_agc_mode(chain_t chain, gain_mode_t gain_mode) +{ + if(chain == CHAIN_1) { + _rx1_agc_mode = gain_mode; + if(_rx1_agc_enable) { + _setup_agc(chain, _rx1_agc_mode); + } + } else if(chain == CHAIN_2){ + _rx2_agc_mode = gain_mode; + if(_rx2_agc_enable) { + _setup_agc(chain, _rx2_agc_mode); + } + } else + { + throw uhd::runtime_error("[ad9361_device_t] Wrong value for chain"); + } +} + +std::vector<std::string> ad9361_device_t::get_filter_names(direction_t direction) +{ + std::vector<std::string> ret; + if(direction == RX) { + for(std::map<std::string, filter_query_helper>::iterator it = _rx_filters.begin(); it != _rx_filters.end(); ++it) { + ret.push_back(it->first); + } + } else if (direction == TX) + { + for(std::map<std::string, filter_query_helper>::iterator it = _tx_filters.begin(); it != _tx_filters.end(); ++it) { + ret.push_back(it->first); + } + } + return ret; +} + +filter_info_base::sptr ad9361_device_t::get_filter(direction_t direction, chain_t chain, const std::string &name) +{ + if(direction == RX) { + if (not _rx_filters[name].get) + { + throw uhd::runtime_error("ad9361_device_t::get_filter this filter can not be read."); + } + return _rx_filters[name].get(direction, chain); + } else if (direction == TX) { + if (not _tx_filters[name].get) + { + throw uhd::runtime_error("ad9361_device_t::get_filter this filter can not be read."); + } + return _tx_filters[name].get(direction, chain); + } + + throw uhd::runtime_error("ad9361_device_t::get_filter wrong direction parameter."); +} + +void ad9361_device_t::set_filter(direction_t direction, chain_t chain, const std::string &name, filter_info_base::sptr filter) +{ + + if(direction == RX) { + if(not _rx_filters[name].set) + { + throw uhd::runtime_error("ad9361_device_t::set_filter this filter can not be written."); + } + _rx_filters[name].set(direction, chain, filter); + } else if (direction == TX) { + if(not _tx_filters[name].set) + { + throw uhd::runtime_error("ad9361_device_t::set_filter this filter can not be written."); + } + _tx_filters[name].set(direction, chain, filter); + } + +} + +double ad9361_device_t::set_bw_filter(direction_t direction, const double rf_bw) +{ + //both low pass filters are programmed to the same bw. However, their cutoffs will differ. + //Together they should create the requested bb bw. + double set_analog_bb_bw = 0; + if(direction == RX) + { + _rx_bb_lp_bw = _calibrate_baseband_rx_analog_filter(rf_bw); //returns bb bw + _rx_tia_lp_bw = _calibrate_rx_TIAs(rf_bw); + _rx_analog_bw = _rx_bb_lp_bw; + set_analog_bb_bw = _rx_analog_bw; + } else { + _tx_bb_lp_bw = _calibrate_baseband_tx_analog_filter(rf_bw); //returns bb bw + _tx_sec_lp_bw = _calibrate_secondary_tx_filter(rf_bw); + _tx_analog_bw = _tx_bb_lp_bw; + set_analog_bb_bw = _tx_analog_bw; + } + return (2.0 * set_analog_bb_bw); +} + +void ad9361_device_t::_set_fir_taps(direction_t direction, chain_t chain, const std::vector<boost::int16_t>& taps) +{ + size_t num_taps = taps.size(); + size_t num_taps_avail = _get_num_fir_taps(direction); + if(num_taps == num_taps_avail) + { + boost::scoped_array<boost::uint16_t> coeffs(new boost::uint16_t[num_taps_avail]); + for (size_t i = 0; i < num_taps_avail; i++) + { + coeffs[i] = boost::uint16_t(taps[i]); + } + _program_fir_filter(direction, chain, num_taps_avail, coeffs.get()); + } else if(num_taps < num_taps_avail){ + throw uhd::runtime_error("ad9361_device_t::_set_fir_taps not enough coefficients."); + } else { + throw uhd::runtime_error("ad9361_device_t::_set_fir_taps too many coefficients."); + } +} + +size_t ad9361_device_t::_get_num_fir_taps(direction_t direction) +{ + boost::uint8_t num = 0; + if(direction == RX) + num = _io_iface->peek8(0x0F5); + else + num = _io_iface->peek8(0x065); + num = ((num >> 5) & 0x07); + return ((num + 1) * 16); +} + +size_t ad9361_device_t::_get_fir_dec_int(direction_t direction) +{ + boost::uint8_t dec_int = 0; + if(direction == RX) + dec_int = _io_iface->peek8(0x003); + else + dec_int = _io_iface->peek8(0x002); + /* + * 0 = dec/int by 1 and bypass filter + * 1 = dec/int by 1 + * 2 = dec/int by 2 + * 3 = dec/int by 4 */ + dec_int = (dec_int & 0x03); + if(dec_int == 3) + { + return 4; + } + return dec_int; +} + +std::vector<boost::int16_t> ad9361_device_t::_get_fir_taps(direction_t direction, chain_t chain) +{ + int base; + size_t num_taps = _get_num_fir_taps(direction); + boost::uint8_t config; + boost::uint8_t reg_numtaps = (((num_taps / 16) - 1) & 0x07) << 5; + config = reg_numtaps | 0x02; //start the programming clock + + if(chain == CHAIN_1) + { + config = config | (1 << 3); + } else if (chain == CHAIN_2){ + config = config | (1 << 4); + } else { + throw uhd::runtime_error("[ad9361_device_t] Can not read both chains synchronously"); + } + + if(direction == RX) + { + base = 0xF0; + } else { + base = 0x60; + } + + _io_iface->poke8(base+5,config); + + std::vector<boost::int16_t> taps; + boost::uint8_t lower_val; + boost::uint8_t higher_val; + boost::uint16_t coeff; + for(size_t i = 0;i < num_taps;i++) + { + _io_iface->poke8(base,0x00+i); + lower_val = _io_iface->peek8(base+3); + higher_val = _io_iface->peek8(base+4); + coeff = ((higher_val << 8) | lower_val); + taps.push_back(boost::int16_t(coeff)); + } + + config = (config & (~(1 << 1))); //disable filter clock + _io_iface->poke8(base+5,config); + return taps; +} + +/* + * Returns either RX TIA LPF or TX Secondary LPF + * depending on the direction. + * See UG570 for details on used scaling factors. */ +filter_info_base::sptr ad9361_device_t::_get_filter_lp_tia_sec(direction_t direction) +{ + double cutoff = 0; + + if(direction == RX) + { + cutoff = 2.5 * _rx_tia_lp_bw; + } else { + cutoff = 5 * _tx_sec_lp_bw; + } + + filter_info_base::sptr lp(new analog_filter_lp(filter_info_base::ANALOG_LOW_PASS, false, 0, "single-pole", cutoff, 20)); + return lp; +} + +/* + * Returns RX/TX BB LPF. + * See UG570 for details on used scaling factors. */ +filter_info_base::sptr ad9361_device_t::_get_filter_lp_bb(direction_t direction) +{ + double cutoff = 0; + if(direction == RX) + { + cutoff = 1.4 * _rx_bb_lp_bw; + } else { + cutoff = 1.6 * _tx_bb_lp_bw; + } + + filter_info_base::sptr bb_lp(new analog_filter_lp(filter_info_base::ANALOG_LOW_PASS, false, 1, "third-order Butterworth", cutoff, 60)); + return bb_lp; +} + +/* + * For RX direction the DEC3 is returned. + * For TX direction the INT3 is returned. */ +filter_info_base::sptr ad9361_device_t::_get_filter_dec_int_3(direction_t direction) +{ + boost::uint8_t enable = 0; + double rate = _adcclock_freq; + double full_scale; + size_t dec = 0; + size_t interpol = 0; + filter_info_base::filter_type type = filter_info_base::DIGITAL_I16; + std::string name; + boost::int16_t taps_array_rx[] = {55, 83, 0, -393, -580, 0, 1914, 4041, 5120, 4041, 1914, 0, -580, -393, 0, 83, 55}; + boost::int16_t taps_array_tx[] = {36, -19, 0, -156, -12, 0, 479, 233, 0, -1215, -993, 0, 3569, 6277, 8192, 6277, 3569, 0, -993, -1215, 0, 223, 479, 0, -12, -156, 0, -19, 36}; + std::vector<boost::int16_t> taps; + + filter_info_base::sptr ret; + + if(direction == RX) + { + full_scale = 16384; + dec = 3; + interpol = 1; + + enable = _io_iface->peek8(0x003); + enable = ((enable >> 4) & 0x03); + taps.assign(taps_array_rx, taps_array_rx + sizeof(taps_array_rx) / sizeof(boost::int16_t) ); + + } else { + full_scale = 8192; + dec = 1; + interpol = 3; + + boost::uint8_t use_dac_clk_div = _io_iface->peek8(0x00A); + use_dac_clk_div = ((use_dac_clk_div >> 3) & 0x01); + if(use_dac_clk_div == 1) + { + rate = rate / 2; + } + + enable = _io_iface->peek8(0x002); + enable = ((enable >> 4) & 0x03); + if(enable == 2) //0 => int. by 1, 1 => int. by 2 (HB3), 2 => int. by 3 + { + rate /= 3; + } + + taps.assign(taps_array_tx, taps_array_tx + sizeof(taps_array_tx) / sizeof(boost::int16_t) ); + } + + ret = filter_info_base::sptr(new digital_filter_base<boost::int16_t>(type, (enable != 2) ? true : false, 2, rate, interpol, dec, full_scale, taps.size(), taps)); + return ret; +} + +filter_info_base::sptr ad9361_device_t::_get_filter_hb_3(direction_t direction) +{ + boost::uint8_t enable = 0; + double rate = _adcclock_freq; + double full_scale = 0; + size_t dec = 1; + size_t interpol = 1; + filter_info_base::filter_type type = filter_info_base::DIGITAL_I16; + boost::int16_t taps_array_rx[] = {1, 4, 6, 4, 1}; + boost::int16_t taps_array_tx[] = {1, 2, 1}; + std::vector<boost::int16_t> taps; + + if(direction == RX) + { + full_scale = 16; + dec = 2; + + enable = _io_iface->peek8(0x003); + enable = ((enable >> 4) & 0x03); + taps.assign(taps_array_rx, taps_array_rx + sizeof(taps_array_rx) / sizeof(boost::int16_t) ); + } else { + full_scale = 2; + interpol = 2; + + boost::uint8_t use_dac_clk_div = _io_iface->peek8(0x00A); + use_dac_clk_div = ((use_dac_clk_div >> 3) & 0x01); + if(use_dac_clk_div == 1) + { + rate = rate / 2; + } + + enable = _io_iface->peek8(0x002); + enable = ((enable >> 4) & 0x03); + if(enable == 1) + { + rate /= 2; + } + taps.assign(taps_array_tx, taps_array_tx + sizeof(taps_array_tx) / sizeof(boost::int16_t) ); + } + + filter_info_base::sptr hb = filter_info_base::sptr(new digital_filter_base<boost::int16_t>(type, (enable != 1) ? true : false, 2, rate, interpol, dec, full_scale, taps.size(), taps)); + return hb; +} + +filter_info_base::sptr ad9361_device_t::_get_filter_hb_2(direction_t direction) +{ + boost::uint8_t enable = 0; + double rate = _adcclock_freq; + double full_scale = 0; + size_t dec = 1; + size_t interpol = 1; + filter_info_base::filter_type type = filter_info_base::DIGITAL_I16; + boost::int16_t taps_array[] = {-9, 0, 73, 128, 73, 0, -9}; + std::vector<boost::int16_t> taps(taps_array, taps_array + sizeof(taps_array) / sizeof(boost::int16_t) ); + + digital_filter_base<boost::int16_t>::sptr hb_3 = boost::dynamic_pointer_cast<digital_filter_base<boost::int16_t> >(_get_filter_hb_3(direction)); + digital_filter_base<boost::int16_t>::sptr dec_int_3 = boost::dynamic_pointer_cast<digital_filter_base<boost::int16_t> >(_get_filter_dec_int_3(direction)); + + if(direction == RX) + { + full_scale = 256; + dec = 2; + enable = _io_iface->peek8(0x003); + } else { + full_scale = 128; + interpol = 2; + enable = _io_iface->peek8(0x002); + } + + enable = ((enable >> 3) & 0x01); + + if(!(hb_3->is_bypassed())) + { + if(direction == RX) + { + rate = hb_3->get_output_rate(); + }else if (direction == TX) { + rate = hb_3->get_input_rate(); + if(enable) + { + rate /= 2; + } + } + } else { //else dec3/int3 or none of them is used. + if(direction == RX) + { + rate = dec_int_3->get_output_rate(); + }else if (direction == TX) { + rate = dec_int_3->get_input_rate(); + if(enable) + { + rate /= 2; + } + } + } + + filter_info_base::sptr hb(new digital_filter_base<boost::int16_t>(type, (enable == 0) ? true : false, 3, rate, interpol, dec, full_scale, taps.size(), taps)); + return hb; +} + +filter_info_base::sptr ad9361_device_t::_get_filter_hb_1(direction_t direction) +{ + boost::uint8_t enable = 0; + double rate = 0; + double full_scale = 0; + size_t dec = 1; + size_t interpol = 1; + filter_info_base::filter_type type = filter_info_base::DIGITAL_I16; + + std::vector<boost::int16_t> taps; + boost::int16_t taps_rx_array[] = {-8, 0, 42, 0, -147, 0, 619, 1013, 619, 0, -147, 0, 42, 0, -8}; + boost::int16_t taps_tx_array[] = {-53, 0, 313, 0, -1155, 0, 4989, 8192, 4989, 0, -1155, 0, 313, 0, -53}; + + digital_filter_base<boost::int16_t>::sptr hb_2 = boost::dynamic_pointer_cast<digital_filter_base<boost::int16_t> >(_get_filter_hb_2(direction)); + + if(direction == RX) + { + full_scale = 2048; + dec = 2; + enable = _io_iface->peek8(0x003); + enable = ((enable >> 2) & 0x01); + rate = hb_2->get_output_rate(); + taps.assign(taps_rx_array, taps_rx_array + sizeof(taps_rx_array) / sizeof(boost::int16_t) ); + } else if (direction == TX) { + full_scale = 8192; + interpol = 2; + enable = _io_iface->peek8(0x002); + enable = ((enable >> 2) & 0x01); + rate = hb_2->get_input_rate(); + if(enable) + { + rate /= 2; + } + taps.assign(taps_tx_array, taps_tx_array + sizeof(taps_tx_array) / sizeof(boost::int16_t) ); + } + + filter_info_base::sptr hb(new digital_filter_base<boost::int16_t>(type, (enable == 0) ? true : false, 4, rate, interpol, dec, full_scale, taps.size(), taps)); + return hb; +} + +filter_info_base::sptr ad9361_device_t::_get_filter_fir(direction_t direction, chain_t chain) +{ + double rate = 0; + size_t dec = 1; + size_t interpol = 1; + size_t max_num_taps = 128; + boost::uint8_t enable = 1; + + digital_filter_base<boost::int16_t>::sptr hb_1 = boost::dynamic_pointer_cast<digital_filter_base<boost::int16_t> >(_get_filter_hb_1(direction)); + + if(direction == RX) + { + dec = _get_fir_dec_int(direction); + if(dec == 0) + { + enable = 0; + dec = 1; + } + interpol = 1; + rate = hb_1->get_output_rate(); + }else if (direction == TX) { + interpol = _get_fir_dec_int(direction); + if(interpol == 0) + { + enable = 0; + interpol = 1; + } + dec = 1; + rate = hb_1->get_input_rate(); + if(enable) + { + rate /= interpol; + } + } + max_num_taps = _get_num_fir_taps(direction); + + filter_info_base::sptr fir(new digital_filter_fir<boost::int16_t>(filter_info_base::DIGITAL_FIR_I16, (enable == 0) ? true : false, 5, rate, interpol, dec, 32767, max_num_taps, _get_fir_taps(direction, chain))); + + return fir; +} + +void ad9361_device_t::_set_filter_fir(direction_t direction, chain_t channel, filter_info_base::sptr filter) +{ + digital_filter_fir<boost::int16_t>::sptr fir = boost::dynamic_pointer_cast<digital_filter_fir<boost::int16_t> >(filter); + //only write taps. Ignore everything else for now + _set_fir_taps(direction, channel, fir->get_taps()); +} + +/* + * If BW of one of the analog filters gets overwritten manually, + * _tx_analog_bw and _rx_analog_bw are not valid any more! + * For useful data in those variables set_bw_filter method should be used + */ +void ad9361_device_t::_set_filter_lp_bb(direction_t direction, filter_info_base::sptr filter) +{ + analog_filter_lp::sptr lpf = boost::dynamic_pointer_cast<analog_filter_lp>(filter); + double bw = lpf->get_cutoff(); + if(direction == RX) + { + //remember: this function takes rf bw as its input and calibrated to 1.4 x the given value + _rx_bb_lp_bw = _calibrate_baseband_rx_analog_filter(2 * bw / 1.4); //returns bb bw + + } else { + //remember: this function takes rf bw as its input and calibrates to 1.6 x the given value + _tx_bb_lp_bw = _calibrate_baseband_tx_analog_filter(2 * bw / 1.6); + } +} + +void ad9361_device_t::_set_filter_lp_tia_sec(direction_t direction, filter_info_base::sptr filter) +{ + analog_filter_lp::sptr lpf = boost::dynamic_pointer_cast<analog_filter_lp>(filter); + double bw = lpf->get_cutoff(); + if(direction == RX) + { + //remember: this function takes rf bw as its input and calibrated to 2.5 x the given value + _rx_tia_lp_bw = _calibrate_rx_TIAs(2 * bw / 2.5); //returns bb bw + + } else { + //remember: this function takes rf bw as its input and calibrates to 5 x the given value + _tx_sec_lp_bw = _calibrate_secondary_tx_filter(2 * bw / 5); + } +} + }} diff --git a/host/lib/usrp/common/ad9361_driver/ad9361_device.h b/host/lib/usrp/common/ad9361_driver/ad9361_device.h index 71ce78da7..a2038ea01 100644 --- a/host/lib/usrp/common/ad9361_driver/ad9361_device.h +++ b/host/lib/usrp/common/ad9361_driver/ad9361_device.h @@ -8,6 +8,14 @@ #include <ad9361_client.h> #include <boost/noncopyable.hpp> #include <boost/thread/recursive_mutex.hpp> +#include <uhd/types/filters.hpp> +#include <uhd/types/sensors.hpp> +#include <complex> +#include <vector> +#include <map> +#include "boost/assign.hpp" +#include "boost/bind.hpp" +#include "boost/function.hpp" namespace uhd { namespace usrp { @@ -15,10 +23,41 @@ class ad9361_device_t : public boost::noncopyable { public: enum direction_t { RX, TX }; - enum chain_t { CHAIN_1, CHAIN_2 }; + enum gain_mode_t {GAIN_MODE_MANUAL, GAIN_MODE_SLOW_AGC, GAIN_MODE_FAST_AGC}; + enum chain_t { CHAIN_1, CHAIN_2, CHAIN_BOTH }; ad9361_device_t(ad9361_params::sptr client, ad9361_io::sptr io_iface) : - _client_params(client), _io_iface(io_iface) {} + _client_params(client), _io_iface(io_iface) { + + /* + * This Boost.Assign to_container() workaround is necessary because STL containers + * apparently confuse newer versions of MSVC. + * + * Source: http://www.boost.org/doc/libs/1_55_0/libs/assign/doc/#portability + */ + + _rx_filters = (boost::assign::map_list_of("LPF_TIA", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_lp_tia_sec, this, _1), + boost::bind(&ad9361_device_t::_set_filter_lp_tia_sec, this, _1, _3))) + ("LPF_BB", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_lp_bb, this, _1), + boost::bind(&ad9361_device_t::_set_filter_lp_bb, this, _1, _3))) + ("HB_3", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_hb_3, this, _1), 0)) + ("DEC_3", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_dec_int_3, this, _1), 0)) + ("HB_2", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_hb_2, this, _1), 0)) + ("HB_1", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_hb_1, this, _1), 0)) + ("FIR_1", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_fir, this, _1, _2), + boost::bind(&ad9361_device_t::_set_filter_fir, this, _1, _2, _3)))).to_container(_rx_filters); + + _tx_filters = (boost::assign::map_list_of("LPF_SECONDARY", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_lp_tia_sec, this, _1), + boost::bind(&ad9361_device_t::_set_filter_lp_tia_sec, this, _1, _3))) + ("LPF_BB", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_lp_bb, this, _1), + boost::bind(&ad9361_device_t::_set_filter_lp_bb, this, _1, _3))) + ("HB_3", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_hb_3, this, _1), 0)) + ("INT_3", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_dec_int_3, this, _1), 0)) + ("HB_2", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_hb_2, this, _1), 0)) + ("HB_1", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_hb_1, this, _1), 0)) + ("FIR_1", filter_query_helper(boost::bind(&ad9361_device_t::_get_filter_fir, this, _1, _2), + boost::bind(&ad9361_device_t::_set_filter_fir, this, _1, _2, _3)))).to_container(_tx_filters); + } /* Initialize the AD9361 codec. */ void initialize(); @@ -69,21 +108,56 @@ public: /* Read back the internal RSSI measurement data. */ double get_rssi(chain_t chain); + /*! Read the internal temperature sensor + *\param calibrate return raw sensor readings or apply calibration factor. + *\param num_samples number of measurements to average over + */ + double get_average_temperature(const double cal_offset = -30.0, const size_t num_samples = 3); + + /* Turn on/off AD9361's RX DC offset correction */ + void set_dc_offset_auto(direction_t direction, const bool on); + + /* Turn on/off AD9361's RX IQ imbalance correction */ + void set_iq_balance_auto(direction_t direction, const bool on); + + /* Configure AD9361's AGC module to use either fast or slow AGC mode. */ + void set_agc_mode(chain_t chain, gain_mode_t gain_mode); + + /* Enable AD9361's AGC gain mode. */ + void set_agc(chain_t chain, bool enable); + + /* Set bandwidth of AD9361's analog LP filters. + * Bandwidth should be RF bandwidth */ + double set_bw_filter(direction_t direction, const double rf_bw); + + /* + * Filter API implementation + * */ + filter_info_base::sptr get_filter(direction_t direction, chain_t chain, const std::string &name); + + void set_filter(direction_t direction, chain_t chain, const std::string &name, filter_info_base::sptr filter); + + std::vector<std::string> get_filter_names(direction_t direction); + //Constants static const double AD9361_MAX_GAIN; static const double AD9361_MAX_CLOCK_RATE; + static const double AD9361_CAL_VALID_WINDOW; static const double AD9361_RECOMMENDED_MAX_BANDWIDTH; private: //Methods void _program_fir_filter(direction_t direction, int num_taps, boost::uint16_t *coeffs); void _setup_tx_fir(size_t num_taps, boost::int32_t interpolation); void _setup_rx_fir(size_t num_taps, boost::int32_t decimation); + void _program_fir_filter(direction_t direction, chain_t chain, int num_taps, boost::uint16_t *coeffs); + void _setup_tx_fir(size_t num_taps); + void _setup_rx_fir(size_t num_taps); void _calibrate_lock_bbpll(); void _calibrate_synth_charge_pumps(); - double _calibrate_baseband_rx_analog_filter(); - double _calibrate_baseband_tx_analog_filter(); - void _calibrate_secondary_tx_filter(); - void _calibrate_rx_TIAs(); + double _calibrate_baseband_rx_analog_filter(double rfbw); + double _calibrate_baseband_tx_analog_filter(double rfbw); + double _calibrate_secondary_tx_filter(double rfbw); + double _calibrate_rx_TIAs(double rfbw); void _setup_adc(); void _calibrate_baseband_dc_offset(); void _calibrate_rf_dc_offset(); @@ -92,12 +166,29 @@ private: //Methods void _calibrate_tx_quadrature(); void _program_mixer_gm_subtable(); void _program_gain_table(); - void _setup_gain_control(); + void _setup_gain_control(bool use_agc); void _setup_synth(direction_t direction, double vcorate); double _tune_bbvco(const double rate); void _reprogram_gains(); double _tune_helper(direction_t direction, const double value); double _setup_rates(const double rate); + double _get_temperature(const double cal_offset, const double timeout = 0.1); + void _configure_bb_rf_dc_tracking(const bool on); + void _setup_agc(chain_t chain, gain_mode_t gain_mode); + void _set_fir_taps(direction_t direction, chain_t chain, const std::vector<boost::int16_t>& taps); + std::vector<boost::int16_t> _get_fir_taps(direction_t direction, chain_t chain); + size_t _get_num_fir_taps(direction_t direction); + size_t _get_fir_dec_int(direction_t direction); + filter_info_base::sptr _get_filter_lp_tia_sec(direction_t direction); + filter_info_base::sptr _get_filter_lp_bb(direction_t direction); + filter_info_base::sptr _get_filter_dec_int_3(direction_t direction); + filter_info_base::sptr _get_filter_hb_3(direction_t direction); + filter_info_base::sptr _get_filter_hb_2(direction_t direction); + filter_info_base::sptr _get_filter_hb_1(direction_t direction); + filter_info_base::sptr _get_filter_fir(direction_t direction, chain_t chain); + void _set_filter_fir(direction_t direction, chain_t channel, filter_info_base::sptr filter); + void _set_filter_lp_bb(direction_t direction, filter_info_base::sptr filter); + void _set_filter_lp_tia_sec(direction_t direction, filter_info_base::sptr filter); private: //Members typedef struct { @@ -110,11 +201,30 @@ private: //Members boost::uint8_t bbftune_mode; } chip_regs_t; + struct filter_query_helper + { + filter_query_helper( + boost::function<filter_info_base::sptr (direction_t, chain_t)> p_get, + boost::function<void (direction_t, chain_t, filter_info_base::sptr)> p_set + ) : get(p_get), set(p_set) { } + + filter_query_helper(){ } + + boost::function<filter_info_base::sptr (direction_t, chain_t)> get; + boost::function<void (direction_t, chain_t, filter_info_base::sptr)> set; + }; + + std::map<std::string, filter_query_helper> _rx_filters; + std::map<std::string, filter_query_helper> _tx_filters; + //Interfaces ad9361_params::sptr _client_params; ad9361_io::sptr _io_iface; //Intermediate state double _rx_freq, _tx_freq, _req_rx_freq, _req_tx_freq; + double _last_calibration_freq; + double _rx_analog_bw, _tx_analog_bw, _rx_bb_lp_bw, _tx_bb_lp_bw; + double _rx_tia_lp_bw, _tx_sec_lp_bw; //! Current baseband sampling rate (this is the actual rate the device is // is running at) double _baseband_bw; @@ -129,10 +239,14 @@ private: //Members double _rx1_gain, _rx2_gain, _tx1_gain, _tx2_gain; boost::int32_t _tfir_factor; boost::int32_t _rfir_factor; + gain_mode_t _rx1_agc_mode, _rx2_agc_mode; + bool _rx1_agc_enable, _rx2_agc_enable; //Register soft-copies chip_regs_t _regs; //Synchronization boost::recursive_mutex _mutex; + bool _use_dc_offset_correction; + bool _use_iq_balance_correction; }; }} //namespace diff --git a/host/lib/usrp/common/ad9361_driver/ad9361_gain_tables.h b/host/lib/usrp/common/ad9361_driver/ad9361_gain_tables.h index 786029d6e..553655fa5 100644 --- a/host/lib/usrp/common/ad9361_driver/ad9361_gain_tables.h +++ b/host/lib/usrp/common/ad9361_driver/ad9361_gain_tables.h @@ -7,91 +7,91 @@ #include <boost/cstdint.hpp> -boost::uint8_t gain_table_sub_1300mhz[77][5] = { {0,0x00,0x00,0x20,1}, - {1,0x00,0x00,0x00,0}, {2,0x00,0x00,0x00,0}, {3,0x00,0x01,0x00,0}, - {4,0x00,0x02,0x00,0}, {5,0x00,0x03,0x00,0}, {6,0x00,0x04,0x00,0}, - {7,0x00,0x05,0x00,0}, {8,0x01,0x03,0x20,1}, {9,0x01,0x04,0x00,0}, - {10,0x01,0x05,0x00,0}, {11,0x01,0x06,0x00,0}, {12,0x01,0x07,0x00,0}, - {13,0x01,0x08,0x00,0}, {14,0x01,0x09,0x00,0}, {15,0x01,0x0A,0x00,0}, - {16,0x01,0x0B,0x00,0}, {17,0x01,0x0C,0x00,0}, {18,0x01,0x0D,0x00,0}, - {19,0x01,0x0E,0x00,0}, {20,0x02,0x09,0x20,1}, {21,0x02,0x0A,0x00,0}, - {22,0x02,0x0B,0x00,0}, {23,0x02,0x0C,0x00,0}, {24,0x02,0x0D,0x00,0}, - {25,0x02,0x0E,0x00,0}, {26,0x02,0x0F,0x00,0}, {27,0x02,0x10,0x00,0}, - {28,0x02,0x2B,0x20,1}, {29,0x02,0x2C,0x00,0}, {30,0x04,0x27,0x20,1}, - {31,0x04,0x28,0x00,0}, {32,0x04,0x29,0x00,0}, {33,0x04,0x2A,0x00,0}, - {34,0x04,0x2B,0x00,1}, {35,0x24,0x21,0x20,0}, {36,0x24,0x22,0x00,1}, - {37,0x44,0x20,0x20,0}, {38,0x44,0x21,0x00,0}, {39,0x44,0x22,0x00,0}, - {40,0x44,0x23,0x00,0}, {41,0x44,0x24,0x00,0}, {42,0x44,0x25,0x00,0}, - {43,0x44,0x26,0x00,0}, {44,0x44,0x27,0x00,0}, {45,0x44,0x28,0x00,0}, - {46,0x44,0x29,0x00,0}, {47,0x44,0x2A,0x00,0}, {48,0x44,0x2B,0x00,0}, - {49,0x44,0x2C,0x00,0}, {50,0x44,0x2D,0x00,0}, {51,0x44,0x2E,0x00,0}, - {52,0x44,0x2F,0x00,0}, {53,0x44,0x30,0x00,0}, {54,0x44,0x31,0x00,0}, - {55,0x64,0x2E,0x20,1}, {56,0x64,0x2F,0x00,0}, {57,0x64,0x30,0x00,0}, - {58,0x64,0x31,0x00,0}, {59,0x64,0x32,0x00,0}, {60,0x64,0x33,0x00,0}, - {61,0x64,0x34,0x00,0}, {62,0x64,0x35,0x00,0}, {63,0x64,0x36,0x00,0}, - {64,0x64,0x37,0x00,0}, {65,0x64,0x38,0x00,0}, {66,0x65,0x38,0x20,1}, - {67,0x66,0x38,0x20,1}, {68,0x67,0x38,0x20,1}, {69,0x68,0x38,0x20,1}, - {70,0x69,0x38,0x20,1}, {71,0x6A,0x38,0x20,1}, {72,0x6B,0x38,0x20,1}, - {73,0x6C,0x38,0x20,1}, {74,0x6D,0x38,0x20,1}, {75,0x6E,0x38,0x20,1}, - {76,0x6F,0x38,0x20,1}}; +boost::uint8_t gain_table_sub_1300mhz[77][3] = { +{ 0x00, 0x00, 0x20 }, { 0x00, 0x00, 0x00 }, { 0x00, 0x00, 0x00 }, +{ 0x00, 0x01, 0x00 }, { 0x00, 0x02, 0x00 }, { 0x00, 0x03, 0x00 }, +{ 0x00, 0x04, 0x00 }, { 0x00, 0x05, 0x00 }, { 0x01, 0x03, 0x20 }, +{ 0x01, 0x04, 0x00 }, { 0x01, 0x05, 0x00 }, { 0x01, 0x06, 0x00 }, +{ 0x01, 0x07, 0x00 }, { 0x01, 0x08, 0x00 }, { 0x01, 0x09, 0x00 }, +{ 0x01, 0x0A, 0x00 }, { 0x01, 0x0B, 0x00 }, { 0x01, 0x0C, 0x00 }, +{ 0x01, 0x0D, 0x00 }, { 0x01, 0x0E, 0x00 }, { 0x02, 0x09, 0x20 }, +{ 0x02, 0x0A, 0x00 }, { 0x02, 0x0B, 0x00 }, { 0x02, 0x0C, 0x00 }, +{ 0x02, 0x0D, 0x00 }, { 0x02, 0x0E, 0x00 }, { 0x02, 0x0F, 0x00 }, +{ 0x02, 0x10, 0x00 }, { 0x02, 0x2B, 0x20 }, { 0x02, 0x2C, 0x00 }, +{ 0x04, 0x28, 0x20 }, { 0x04, 0x29, 0x00 }, { 0x04, 0x2A, 0x00 }, +{ 0x04, 0x2B, 0x00 }, { 0x24, 0x20, 0x20 }, { 0x24, 0x21, 0x00 }, +{ 0x44, 0x20, 0x20 }, { 0x44, 0x21, 0x00 }, { 0x44, 0x22, 0x00 }, +{ 0x44, 0x23, 0x00 }, { 0x44, 0x24, 0x00 }, { 0x44, 0x25, 0x00 }, +{ 0x44, 0x26, 0x00 }, { 0x44, 0x27, 0x00 }, { 0x44, 0x28, 0x00 }, +{ 0x44, 0x29, 0x00 }, { 0x44, 0x2A, 0x00 }, { 0x44, 0x2B, 0x00 }, +{ 0x44, 0x2C, 0x00 }, { 0x44, 0x2D, 0x00 }, { 0x44, 0x2E, 0x00 }, +{ 0x44, 0x2F, 0x00 }, { 0x44, 0x30, 0x00 }, { 0x44, 0x31, 0x00 }, +{ 0x44, 0x32, 0x00 }, { 0x64, 0x2E, 0x20 }, { 0x64, 0x2F, 0x00 }, +{ 0x64, 0x30, 0x00 }, { 0x64, 0x31, 0x00 }, { 0x64, 0x32, 0x00 }, +{ 0x64, 0x33, 0x00 }, { 0x64, 0x34, 0x00 }, { 0x64, 0x35, 0x00 }, +{ 0x64, 0x36, 0x00 }, { 0x64, 0x37, 0x00 }, { 0x64, 0x38, 0x00 }, +{ 0x65, 0x38, 0x20 }, { 0x66, 0x38, 0x20 }, { 0x67, 0x38, 0x20 }, +{ 0x68, 0x38, 0x20 }, { 0x69, 0x38, 0x20 }, { 0x6A, 0x38, 0x20 }, +{ 0x6B, 0x38, 0x20 }, { 0x6C, 0x38, 0x20 }, { 0x6D, 0x38, 0x20 }, +{ 0x6E, 0x38, 0x20 }, { 0x6F, 0x38, 0x20 } }; -boost::uint8_t gain_table_1300mhz_to_4000mhz[77][5] = { {0,0x00,0x00,0x20,1}, - {1,0x00,0x00,0x00,0}, {2,0x00,0x00,0x00,0}, {3,0x00,0x01,0x00,0}, - {4,0x00,0x02,0x00,0}, {5,0x00,0x03,0x00,0}, {6,0x00,0x04,0x00,0}, - {7,0x00,0x05,0x00,0}, {8,0x01,0x03,0x20,1}, {9,0x01,0x04,0x00,0}, - {10,0x01,0x05,0x00,0}, {11,0x01,0x06,0x00,0}, {12,0x01,0x07,0x00,0}, - {13,0x01,0x08,0x00,0}, {14,0x01,0x09,0x00,0}, {15,0x01,0x0A,0x00,0}, - {16,0x01,0x0B,0x00,0}, {17,0x01,0x0C,0x00,0}, {18,0x01,0x0D,0x00,0}, - {19,0x01,0x0E,0x00,0}, {20,0x02,0x09,0x20,1}, {21,0x02,0x0A,0x00,0}, - {22,0x02,0x0B,0x00,0}, {23,0x02,0x0C,0x00,0}, {24,0x02,0x0D,0x00,0}, - {25,0x02,0x0E,0x00,0}, {26,0x02,0x0F,0x00,0}, {27,0x02,0x10,0x00,0}, - {28,0x02,0x2B,0x20,1}, {29,0x02,0x2C,0x00,0}, {30,0x04,0x28,0x20,1}, - {31,0x04,0x29,0x00,0}, {32,0x04,0x2A,0x00,0}, {33,0x04,0x2B,0x00,0}, - {34,0x24,0x20,0x20,0}, {35,0x24,0x21,0x00,1}, {36,0x44,0x20,0x20,0}, - {37,0x44,0x21,0x00,1}, {38,0x44,0x22,0x00,0}, {39,0x44,0x23,0x00,0}, - {40,0x44,0x24,0x00,0}, {41,0x44,0x25,0x00,0}, {42,0x44,0x26,0x00,0}, - {43,0x44,0x27,0x00,0}, {44,0x44,0x28,0x00,0}, {45,0x44,0x29,0x00,0}, - {46,0x44,0x2A,0x00,0}, {47,0x44,0x2B,0x00,0}, {48,0x44,0x2C,0x00,0}, - {49,0x44,0x2D,0x00,0}, {50,0x44,0x2E,0x00,0}, {51,0x44,0x2F,0x00,0}, - {52,0x44,0x30,0x00,0}, {53,0x44,0x31,0x00,0}, {54,0x44,0x32,0x00,0}, - {55,0x64,0x2E,0x20,1}, {56,0x64,0x2F,0x00,0}, {57,0x64,0x30,0x00,0}, - {58,0x64,0x31,0x00,0}, {59,0x64,0x32,0x00,0}, {60,0x64,0x33,0x00,0}, - {61,0x64,0x34,0x00,0}, {62,0x64,0x35,0x00,0}, {63,0x64,0x36,0x00,0}, - {64,0x64,0x37,0x00,0}, {65,0x64,0x38,0x00,0}, {66,0x65,0x38,0x20,1}, - {67,0x66,0x38,0x20,1}, {68,0x67,0x38,0x20,1}, {69,0x68,0x38,0x20,1}, - {70,0x69,0x38,0x20,1}, {71,0x6A,0x38,0x20,1}, {72,0x6B,0x38,0x20,1}, - {73,0x6C,0x38,0x20,1}, {74,0x6D,0x38,0x20,1}, {75,0x6E,0x38,0x20,1}, - {76,0x6F,0x38,0x20,1}}; +boost::uint8_t gain_table_1300mhz_to_4000mhz[77][3] = { +{ 0x00, 0x00, 0x20 }, { 0x00, 0x00, 0x00 }, { 0x00, 0x00, 0x00 }, +{ 0x00, 0x01, 0x00 }, { 0x00, 0x02, 0x00 }, { 0x00, 0x03, 0x00 }, +{ 0x00, 0x04, 0x00 }, { 0x00, 0x05, 0x00 }, { 0x01, 0x03, 0x20 }, +{ 0x01, 0x04, 0x00 }, { 0x01, 0x05, 0x00 }, { 0x01, 0x06, 0x00 }, +{ 0x01, 0x07, 0x00 }, { 0x01, 0x08, 0x00 }, { 0x01, 0x09, 0x00 }, +{ 0x01, 0x0A, 0x00 }, { 0x01, 0x0B, 0x00 }, { 0x01, 0x0C, 0x00 }, +{ 0x01, 0x0D, 0x00 }, { 0x01, 0x0E, 0x00 }, { 0x02, 0x09, 0x20 }, +{ 0x02, 0x0A, 0x00 }, { 0x02, 0x0B, 0x00 }, { 0x02, 0x0C, 0x00 }, +{ 0x02, 0x0D, 0x00 }, { 0x02, 0x0E, 0x00 }, { 0x02, 0x0F, 0x00 }, +{ 0x02, 0x10, 0x00 }, { 0x02, 0x2B, 0x20 }, { 0x02, 0x2C, 0x00 }, +{ 0x04, 0x27, 0x20 }, { 0x04, 0x28, 0x00 }, { 0x04, 0x29, 0x00 }, +{ 0x04, 0x2A, 0x00 }, { 0x04, 0x2B, 0x00 }, { 0x24, 0x21, 0x20 }, +{ 0x24, 0x22, 0x00 }, { 0x44, 0x20, 0x20 }, { 0x44, 0x21, 0x00 }, +{ 0x44, 0x22, 0x00 }, { 0x44, 0x23, 0x00 }, { 0x44, 0x24, 0x00 }, +{ 0x44, 0x25, 0x00 }, { 0x44, 0x26, 0x00 }, { 0x44, 0x27, 0x00 }, +{ 0x44, 0x28, 0x00 }, { 0x44, 0x29, 0x00 }, { 0x44, 0x2A, 0x00 }, +{ 0x44, 0x2B, 0x00 }, { 0x44, 0x2C, 0x00 }, { 0x44, 0x2D, 0x00 }, +{ 0x44, 0x2E, 0x00 }, { 0x44, 0x2F, 0x00 }, { 0x44, 0x30, 0x00 }, +{ 0x44, 0x31, 0x00 }, { 0x64, 0x2E, 0x20 }, { 0x64, 0x2F, 0x00 }, +{ 0x64, 0x30, 0x00 }, { 0x64, 0x31, 0x00 }, { 0x64, 0x32, 0x00 }, +{ 0x64, 0x33, 0x00 }, { 0x64, 0x34, 0x00 }, { 0x64, 0x35, 0x00 }, +{ 0x64, 0x36, 0x00 }, { 0x64, 0x37, 0x00 }, { 0x64, 0x38, 0x00 }, +{ 0x65, 0x38, 0x20 }, { 0x66, 0x38, 0x20 }, { 0x67, 0x38, 0x20 }, +{ 0x68, 0x38, 0x20 }, { 0x69, 0x38, 0x20 }, { 0x6A, 0x38, 0x20 }, +{ 0x6B, 0x38, 0x20 }, { 0x6C, 0x38, 0x20 }, { 0x6D, 0x38, 0x20 }, +{ 0x6E, 0x38, 0x20 }, { 0x6F, 0x38, 0x20 } }; -boost::uint8_t gain_table_4000mhz_to_6000mhz[77][5] = { {0,0x00,0x00,0x20,1}, - {1,0x00,0x00,0x00,0}, {2,0x00,0x00,0x00,0}, {3,0x00,0x00,0x00,0}, - {4,0x00,0x00,0x00,0}, {5,0x00,0x01,0x00,0}, {6,0x00,0x02,0x00,0}, - {7,0x00,0x03,0x00,0}, {8,0x01,0x01,0x20,1}, {9,0x01,0x02,0x00,0}, - {10,0x01,0x03,0x00,0}, {11,0x01,0x04,0x20,1}, {12,0x01,0x05,0x00,0}, - {13,0x01,0x06,0x00,0}, {14,0x01,0x07,0x00,0}, {15,0x01,0x08,0x00,0}, - {16,0x01,0x09,0x00,0}, {17,0x01,0x0A,0x00,0}, {18,0x01,0x0B,0x00,0}, - {19,0x01,0x0C,0x00,0}, {20,0x02,0x08,0x20,1}, {21,0x02,0x09,0x00,0}, - {22,0x02,0x0A,0x00,0}, {23,0x02,0x0B,0x20,1}, {24,0x02,0x0C,0x00,0}, - {25,0x02,0x0D,0x00,0}, {26,0x02,0x0E,0x00,0}, {27,0x02,0x0F,0x00,0}, - {28,0x02,0x2A,0x20,1}, {29,0x02,0x2B,0x00,0}, {30,0x04,0x27,0x20,1}, - {31,0x04,0x28,0x00,0}, {32,0x04,0x29,0x00,0}, {33,0x04,0x2A,0x00,0}, - {34,0x04,0x2B,0x00,0}, {35,0x04,0x2C,0x00,0}, {36,0x04,0x2D,0x00,0}, - {37,0x24,0x20,0x20,1}, {38,0x24,0x21,0x00,0}, {39,0x24,0x22,0x00,0}, - {40,0x44,0x20,0x20,1}, {41,0x44,0x21,0x00,0}, {42,0x44,0x22,0x00,0}, - {43,0x44,0x23,0x00,0}, {44,0x44,0x24,0x00,0}, {45,0x44,0x25,0x00,0}, - {46,0x44,0x26,0x00,0}, {47,0x44,0x27,0x00,0}, {48,0x44,0x28,0x00,0}, - {49,0x44,0x29,0x00,0}, {50,0x44,0x2A,0x00,0}, {51,0x44,0x2B,0x00,0}, - {52,0x44,0x2C,0x00,0}, {53,0x44,0x2D,0x00,0}, {54,0x44,0x2E,0x00,0}, - {55,0x64,0x2E,0x20,1}, {56,0x64,0x2F,0x00,0}, {57,0x64,0x30,0x00,0}, - {58,0x64,0x31,0x00,0}, {59,0x64,0x32,0x00,0}, {60,0x64,0x33,0x00,0}, - {61,0x64,0x34,0x00,0}, {62,0x64,0x35,0x00,0}, {63,0x64,0x36,0x00,0}, - {64,0x64,0x37,0x00,0}, {65,0x64,0x38,0x00,0}, {66,0x65,0x38,0x20,1}, - {67,0x66,0x38,0x20,1}, {68,0x67,0x38,0x20,1}, {69,0x68,0x38,0x20,1}, - {70,0x69,0x38,0x20,1}, {71,0x6A,0x38,0x20,1}, {72,0x6B,0x38,0x20,1}, - {73,0x6C,0x38,0x20,1}, {74,0x6D,0x38,0x20,1}, {75,0x6E,0x38,0x20,1}, - {76,0x6F,0x38,0x20,1}}; +boost::uint8_t gain_table_4000mhz_to_6000mhz[77][3] = { +{ 0x00, 0x00, 0x20 }, { 0x00, 0x00, 0x00 }, { 0x00, 0x00, 0x00 }, +{ 0x00, 0x00, 0x00 }, { 0x00, 0x00, 0x00 }, { 0x00, 0x01, 0x00 }, +{ 0x00, 0x02, 0x00 }, { 0x00, 0x03, 0x00 }, { 0x01, 0x01, 0x20 }, +{ 0x01, 0x02, 0x00 }, { 0x01, 0x03, 0x00 }, { 0x01, 0x04, 0x20 }, +{ 0x01, 0x05, 0x00 }, { 0x01, 0x06, 0x00 }, { 0x01, 0x07, 0x00 }, +{ 0x01, 0x08, 0x00 }, { 0x01, 0x09, 0x00 }, { 0x01, 0x0A, 0x00 }, +{ 0x01, 0x0B, 0x00 }, { 0x01, 0x0C, 0x00 }, { 0x02, 0x08, 0x20 }, +{ 0x02, 0x09, 0x00 }, { 0x02, 0x0A, 0x00 }, { 0x02, 0x0B, 0x20 }, +{ 0x02, 0x0C, 0x00 }, { 0x02, 0x0D, 0x00 }, { 0x02, 0x0E, 0x00 }, +{ 0x02, 0x0F, 0x00 }, { 0x02, 0x2A, 0x20 }, { 0x02, 0x2B, 0x00 }, +{ 0x04, 0x27, 0x20 }, { 0x04, 0x28, 0x00 }, { 0x04, 0x29, 0x00 }, +{ 0x04, 0x2A, 0x00 }, { 0x04, 0x2B, 0x00 }, { 0x04, 0x2C, 0x00 }, +{ 0x04, 0x2D, 0x00 }, { 0x24, 0x20, 0x20 }, { 0x24, 0x21, 0x00 }, +{ 0x24, 0x22, 0x00 }, { 0x44, 0x20, 0x20 }, { 0x44, 0x21, 0x00 }, +{ 0x44, 0x22, 0x00 }, { 0x44, 0x23, 0x00 }, { 0x44, 0x24, 0x00 }, +{ 0x44, 0x25, 0x00 }, { 0x44, 0x26, 0x00 }, { 0x44, 0x27, 0x00 }, +{ 0x44, 0x28, 0x00 }, { 0x44, 0x29, 0x00 }, { 0x44, 0x2A, 0x00 }, +{ 0x44, 0x2B, 0x00 }, { 0x44, 0x2C, 0x00 }, { 0x44, 0x2D, 0x00 }, +{ 0x44, 0x2E, 0x00 }, { 0x64, 0x2E, 0x20 }, { 0x64, 0x2F, 0x00 }, +{ 0x64, 0x30, 0x00 }, { 0x64, 0x31, 0x00 }, { 0x64, 0x32, 0x00 }, +{ 0x64, 0x33, 0x00 }, { 0x64, 0x34, 0x00 }, { 0x64, 0x35, 0x00 }, +{ 0x64, 0x36, 0x00 }, { 0x64, 0x37, 0x00 }, { 0x64, 0x38, 0x00 }, +{ 0x65, 0x38, 0x20 }, { 0x66, 0x38, 0x20 }, { 0x67, 0x38, 0x20 }, +{ 0x68, 0x38, 0x20 }, { 0x69, 0x38, 0x20 }, { 0x6A, 0x38, 0x20 }, +{ 0x6B, 0x38, 0x20 }, { 0x6C, 0x38, 0x20 }, { 0x6D, 0x38, 0x20 }, +{ 0x6E, 0x38, 0x20 }, { 0x6F, 0x38, 0x20 } }; #endif /* INCLUDED_AD9361_GAIN_TABLES_HPP */ diff --git a/host/lib/usrp/common/ad9361_driver/ad9361_synth_lut.h b/host/lib/usrp/common/ad9361_driver/ad9361_synth_lut.h index cb320e1f4..0475a5eb1 100644 --- a/host/lib/usrp/common/ad9361_driver/ad9361_synth_lut.h +++ b/host/lib/usrp/common/ad9361_driver/ad9361_synth_lut.h @@ -6,20 +6,20 @@ #define INCLUDED_AD9361_SYNTH_LUT_HPP -double vco_index[53] = {12605000000, 12245000000, 11906000000, 11588000000, - 11288000000, 11007000000, 10742000000, 10492000000, - 10258000000, 10036000000, 9827800000, 9631100000, - 9445300000, 9269800000, 9103600000, 8946300000, - 8797000000, 8655300000, 8520600000, 8392300000, - 8269900000, 8153100000, 8041400000, 7934400000, - 7831800000, 7733200000, 7638400000, 7547100000, - 7459000000, 7374000000, 7291900000, 7212400000, - 7135500000, 7061000000, 6988700000, 6918600000, - 6850600000, 6784600000, 6720500000, 6658200000, - 6597800000, 6539200000, 6482300000, 6427000000, - 6373400000, 6321400000, 6270900000, 6222000000, - 6174500000, 6128400000, 6083600000, 6040100000, - 5997700000}; +double vco_index[53] = {12605000000.0, 12245000000.0, 11906000000.0, 11588000000.0, + 11288000000.0, 11007000000.0, 10742000000.0, 10492000000.0, + 10258000000.0, 10036000000.0, 9827800000.0, 9631100000.0, + 9445300000.0, 9269800000.0, 9103600000.0, 8946300000.0, + 8797000000.0, 8655300000.0, 8520600000.0, 8392300000.0, + 8269900000.0, 8153100000.0, 8041400000.0, 7934400000.0, + 7831800000.0, 7733200000.0, 7638400000.0, 7547100000.0, + 7459000000.0, 7374000000.0, 7291900000.0, 7212400000.0, + 7135500000.0, 7061000000.0, 6988700000.0, 6918600000.0, + 6850600000.0, 6784600000.0, 6720500000.0, 6658200000.0, + 6597800000.0, 6539200000.0, 6482300000.0, 6427000000.0, + 6373400000.0, 6321400000.0, 6270900000.0, 6222000000.0, + 6174500000.0, 6128400000.0, 6083600000.0, 6040100000.0, + 5997700000.0}; int synth_cal_lut[53][12] = { {10, 0, 4, 0, 15, 8, 8, 13, 4, 13, 15, 9}, {10, 0, 4, 0, 15, 8, 9, 13, 4, 13, 15, 9}, diff --git a/host/lib/usrp/cores/gpio_core_200.hpp b/host/lib/usrp/cores/gpio_core_200.hpp index 164437f40..e22834fd9 100644 --- a/host/lib/usrp/cores/gpio_core_200.hpp +++ b/host/lib/usrp/cores/gpio_core_200.hpp @@ -1,5 +1,5 @@ // -// Copyright 2011,2014 Ettus Research LLC +// Copyright 2011,2014,2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -20,10 +20,34 @@ #include <uhd/config.hpp> #include <uhd/usrp/dboard_iface.hpp> +#include <boost/assign.hpp> #include <boost/cstdint.hpp> #include <boost/utility.hpp> #include <boost/shared_ptr.hpp> #include <uhd/types/wb_iface.hpp> +#include <map> + +typedef enum { + GPIO_CTRL, + GPIO_DDR, + GPIO_OUT, + GPIO_ATR_0X, + GPIO_ATR_RX, + GPIO_ATR_TX, + GPIO_ATR_XX +} gpio_attr_t; + +typedef std::map<gpio_attr_t,std::string> gpio_attr_map_t; +static const gpio_attr_map_t gpio_attr_map = + boost::assign::map_list_of + (GPIO_CTRL, "CTRL") + (GPIO_DDR, "DDR") + (GPIO_OUT, "OUT") + (GPIO_ATR_0X, "ATR_0X") + (GPIO_ATR_RX, "ATR_RX") + (GPIO_ATR_TX, "ATR_TX") + (GPIO_ATR_XX, "ATR_XX") +; class gpio_core_200 : boost::noncopyable{ public: diff --git a/host/lib/usrp/dboard_eeprom.cpp b/host/lib/usrp/dboard_eeprom.cpp index f2bee47a9..3b56ae19a 100644 --- a/host/lib/usrp/dboard_eeprom.cpp +++ b/host/lib/usrp/dboard_eeprom.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010-2011 Ettus Research LLC +// Copyright 2010-2011,2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -15,6 +15,7 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // +#include <uhd/types/byte_vector.hpp> #include <uhd/usrp/dboard_eeprom.hpp> #include <uhd/exception.hpp> #include <uhd/utils/log.hpp> @@ -27,30 +28,6 @@ using namespace uhd; using namespace uhd::usrp; -/*********************************************************************** - * Utility functions - **********************************************************************/ - -//! create a string from a byte vector, return empty if invalid ascii -static const std::string bytes_to_string(const byte_vector_t &bytes){ - std::string out; - BOOST_FOREACH(boost::uint8_t byte, bytes){ - if (byte < 32 or byte > 127) return out; - out += byte; - } - return out; -} - -//! create a byte vector from a string, null terminate unless max length -static const byte_vector_t string_to_bytes(const std::string &string, size_t max_length){ - byte_vector_t bytes; - for (size_t i = 0; i < std::min(string.size(), max_length); i++){ - bytes.push_back(string[i]); - } - if (bytes.size() < max_length - 1) bytes.push_back('\0'); - return bytes; -} - //////////////////////////////////////////////////////////////////////// // format of daughterboard EEPROM // 00: 0xDB code for ``I'm a daughterboard'' diff --git a/host/lib/usrp/e100/e100_impl.cpp b/host/lib/usrp/e100/e100_impl.cpp index ac419e0e0..6d3c08534 100644 --- a/host/lib/usrp/e100/e100_impl.cpp +++ b/host/lib/usrp/e100/e100_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010-2012,2014 Ettus Research LLC +// Copyright 2010-2012,2014-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -28,6 +28,7 @@ #include <boost/functional/hash.hpp> #include <boost/assign/list_of.hpp> #include <fstream> +#include <iostream> #include <ctime> using namespace uhd; @@ -45,7 +46,7 @@ namespace fs = boost::filesystem; /*********************************************************************** * Discovery **********************************************************************/ -static device_addrs_t e100_find(const device_addr_t &hint){ +device_addrs_t e100_find(const device_addr_t &hint){ device_addrs_t e100_addrs; //return an empty list of addresses when type is set to non-usrp-e @@ -104,17 +105,10 @@ static const uhd::dict<std::string, std::string> model_to_fpga_file_name = boost ("E110", "usrp_e110_fpga.bin") ; -/*********************************************************************** - * Structors - **********************************************************************/ -e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ - _tree = property_tree::make(); - _type = device::USRP; - _ignore_cal_file = device_addr.has_key("ignore-cal-file"); - +std::string get_default_e1x0_fpga_image(const uhd::device_addr_t &device_addr){ //read the eeprom so we can determine the hardware - _dev_i2c_iface = e100_ctrl::make_dev_i2c_iface(E100_I2C_DEV_NODE); - const mboard_eeprom_t mb_eeprom(*_dev_i2c_iface, E100_EEPROM_MAP_KEY); + uhd::i2c_iface::sptr dev_i2c_iface = e100_ctrl::make_dev_i2c_iface(E100_I2C_DEV_NODE); + const mboard_eeprom_t mb_eeprom(*dev_i2c_iface, E100_EEPROM_MAP_KEY); //determine the model string for this device const std::string model = device_addr.get("model", mb_eeprom.get("model", "")); @@ -126,7 +120,21 @@ e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ ) % model)); //extract the fpga path and compute hash - const std::string default_fpga_file_name = model_to_fpga_file_name[model]; + return model_to_fpga_file_name[model]; +} + +/*********************************************************************** + * Structors + **********************************************************************/ +e100_impl::e100_impl(const uhd::device_addr_t &device_addr){ + _tree = property_tree::make(); + _type = device::USRP; + _ignore_cal_file = device_addr.has_key("ignore-cal-file"); + + _dev_i2c_iface = e100_ctrl::make_dev_i2c_iface(E100_I2C_DEV_NODE); + const mboard_eeprom_t mb_eeprom(*_dev_i2c_iface, E100_EEPROM_MAP_KEY); + const std::string default_fpga_file_name = get_default_e1x0_fpga_image(device_addr); + const std::string model = device_addr["model"]; std::string e100_fpga_image; try{ e100_fpga_image = find_image_path(device_addr.get("fpga", default_fpga_file_name)); diff --git a/host/lib/usrp/e100/e100_impl.hpp b/host/lib/usrp/e100/e100_impl.hpp index 4efc21427..d00668224 100644 --- a/host/lib/usrp/e100/e100_impl.hpp +++ b/host/lib/usrp/e100/e100_impl.hpp @@ -29,6 +29,7 @@ #include "recv_packet_demuxer.hpp" #include <uhd/device.hpp> #include <uhd/property_tree.hpp> +#include <uhd/types/device_addr.hpp> #include <uhd/usrp/subdev_spec.hpp> #include <uhd/usrp/dboard_eeprom.hpp> #include <uhd/usrp/mboard_eeprom.hpp> @@ -68,6 +69,9 @@ uhd::usrp::dboard_iface::sptr make_e100_dboard_iface( e100_codec_ctrl::sptr codec ); +uhd::device_addrs_t e100_find(const uhd::device_addr_t &hint); +std::string get_default_e1x0_fpga_image(const uhd::device_addr_t &device_addr); + /*! * USRP-E100 implementation guts: * The implementation details are encapsulated here. diff --git a/host/lib/usrp/e100/fpga_downloader.cpp b/host/lib/usrp/e100/fpga_downloader.cpp index c9d77f560..9abde32f7 100644 --- a/host/lib/usrp/e100/fpga_downloader.cpp +++ b/host/lib/usrp/e100/fpga_downloader.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010-2011,2014 Ettus Research LLC +// Copyright 2010-2011,2014-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -17,8 +17,16 @@ #include <uhd/config.hpp> #ifdef UHD_DLL_EXPORTS +#include <boost/filesystem.hpp> +#include <boost/format.hpp> #include <uhd/exception.hpp> +#include <uhd/device.hpp> +#include <uhd/image_loader.hpp> +#include <uhd/types/device_addr.hpp> #include <uhd/utils/msg.hpp> +#include <uhd/utils/paths.hpp> +#include <uhd/utils/static.hpp> +#include "e100_impl.hpp" #else //special case when this file is externally included #include <stdexcept> #include <iostream> @@ -270,3 +278,34 @@ void e100_load_fpga(const std::string &bin_file){ } +#ifdef UHD_DLL_EXPORTS +namespace fs = boost::filesystem; + +static bool e100_image_loader(const uhd::image_loader::image_loader_args_t &image_loader_args){ + // Make sure this is an E1x0 + uhd::device_addrs_t devs = e100_find(uhd::device_addr_t()); + if(devs.size() == 0 or !image_loader_args.load_fpga) return false; + + std::string fpga_filename; + if(image_loader_args.fpga_path == ""){ + fpga_filename = uhd::find_image_path(get_default_e1x0_fpga_image(devs[0])); + } + else{ + if(not fs::exists(image_loader_args.fpga_path)){ + throw uhd::runtime_error(str(boost::format("The path \"%s\" does not exist.") + % image_loader_args.fpga_path)); + } + else fpga_filename = image_loader_args.fpga_path; + } + + e100_load_fpga(fpga_filename); + return true; +} + +UHD_STATIC_BLOCK(register_e100_image_loader){ + std::string recovery_instructions = "The default FPGA image will be loaded the next time " + "UHD uses this device."; + + uhd::image_loader::register_image_loader("e100", e100_image_loader, recovery_instructions); +} +#endif /* UHD_DLL_EXPORTS */ diff --git a/host/lib/usrp/e300/e300_common.cpp b/host/lib/usrp/e300/e300_common.cpp index db5b37055..29117e21f 100644 --- a/host/lib/usrp/e300/e300_common.cpp +++ b/host/lib/usrp/e300/e300_common.cpp @@ -1,5 +1,5 @@ // -// Copyright 2014 Ettus Research LLC +// Copyright 2014-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -14,8 +14,12 @@ // You should have received a copy of the GNU General Public License // along with this program. If not, see <http://www.gnu.org/licenses/>. // +#include <uhd/image_loader.hpp> #include <uhd/utils/msg.hpp> +#include <uhd/utils/paths.hpp> +#include <uhd/utils/static.hpp> +#include "e300_impl.hpp" #include "e300_fifo_config.hpp" #include "e300_fifo_config.hpp" @@ -23,6 +27,7 @@ #include <boost/filesystem.hpp> #include <fstream> +#include <string> namespace uhd { namespace usrp { namespace e300 { @@ -54,6 +59,34 @@ void load_fpga_image(const std::string &path) UHD_MSG(status) << " done" << std::endl; } +static bool e300_image_loader(const image_loader::image_loader_args_t &image_loader_args) { + // Make sure this is an E3x0 and we don't want to use anything connected + uhd::device_addrs_t devs = e300_find(image_loader_args.args); + if(devs.size() == 0 or !image_loader_args.load_fpga) return false; + + std::string fpga_filename, idle_image; // idle_image never used, just needed for function + if(image_loader_args.fpga_path == "") { + get_e3x0_fpga_images(devs[0], fpga_filename, idle_image); + } + else { + if(not boost::filesystem::exists(image_loader_args.fpga_path)) { + throw uhd::runtime_error(str(boost::format("The path \"%s\" does not exist.") + % image_loader_args.fpga_path)); + } + else fpga_filename = image_loader_args.fpga_path; + } + + load_fpga_image(fpga_filename); + return true; +} + +UHD_STATIC_BLOCK(register_e300_image_loader) { + std::string recovery_instructions = "The default FPGA image will be loaded the next " + "time UHD uses this device."; + + image_loader::register_image_loader("e3x0", e300_image_loader, recovery_instructions); +} + } }}} diff --git a/host/lib/usrp/e300/e300_defaults.hpp b/host/lib/usrp/e300/e300_defaults.hpp index 89afcb256..41e8453c4 100644 --- a/host/lib/usrp/e300/e300_defaults.hpp +++ b/host/lib/usrp/e300/e300_defaults.hpp @@ -24,7 +24,7 @@ namespace uhd { namespace usrp { namespace e300 { static const double DEFAULT_TICK_RATE = 32e6; static const double MAX_TICK_RATE = 50e6; -static const double MIN_TICK_RATE = 1e6; +static const double MIN_TICK_RATE = 10e6; static const double DEFAULT_TX_SAMP_RATE = 1.0e6; static const double DEFAULT_RX_SAMP_RATE = 1.0e6; @@ -70,7 +70,7 @@ public: digital_interface_delays_t get_digital_interface_timing() { digital_interface_delays_t delays; delays.rx_clk_delay = 0; - delays.rx_data_delay = 0xF; + delays.rx_data_delay = 0x8; delays.tx_clk_delay = 0; delays.tx_data_delay = 0xF; return delays; diff --git a/host/lib/usrp/e300/e300_fpga_defs.hpp b/host/lib/usrp/e300/e300_fpga_defs.hpp index eea4d7f63..fbbca329a 100644 --- a/host/lib/usrp/e300/e300_fpga_defs.hpp +++ b/host/lib/usrp/e300/e300_fpga_defs.hpp @@ -21,7 +21,7 @@ namespace uhd { namespace usrp { namespace e300 { namespace fpga { static const size_t NUM_RADIOS = 2; -static const boost::uint32_t COMPAT_MAJOR = 8; +static const boost::uint32_t COMPAT_MAJOR = 9; static const boost::uint32_t COMPAT_MINOR = 0; }}}} // namespace diff --git a/host/lib/usrp/e300/e300_impl.cpp b/host/lib/usrp/e300/e300_impl.cpp index 515fccc08..5e3f4c575 100644 --- a/host/lib/usrp/e300/e300_impl.cpp +++ b/host/lib/usrp/e300/e300_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2013-2014 Ettus Research LLC +// Copyright 2013-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -121,7 +121,7 @@ static bool is_loopback(const if_addrs_t &if_addrs) return if_addrs.inet == asio::ip::address_v4::loopback().to_string(); } -static device_addrs_t e300_find(const device_addr_t &multi_dev_hint) +device_addrs_t e300_find(const device_addr_t &multi_dev_hint) { // handle multi device discovery device_addrs_t hints = separate_device_addr(multi_dev_hint); @@ -268,6 +268,36 @@ static device::sptr e300_make(const device_addr_t &device_addr) return device::sptr(new e300_impl(device_addr)); } +// Common code used by e300_impl and e300_image_loader +void get_e3x0_fpga_images(const uhd::device_addr_t &device_addr, + std::string &fpga_image, + std::string &idle_image){ + const boost::uint16_t pid = boost::lexical_cast<boost::uint16_t>( + device_addr["product"]); + + //extract the FPGA path for the e300 + switch(e300_eeprom_manager::get_mb_type(pid)) { + case e300_eeprom_manager::USRP_E310_MB: + fpga_image = device_addr.cast<std::string>("fpga", + find_image_path(E310_FPGA_FILE_NAME)); + idle_image = find_image_path(E310_FPGA_IDLE_FILE_NAME); + break; + case e300_eeprom_manager::USRP_E300_MB: + fpga_image = device_addr.cast<std::string>("fpga", + find_image_path(E300_FPGA_FILE_NAME)); + idle_image = find_image_path(E300_FPGA_IDLE_FILE_NAME); + break; + case e300_eeprom_manager::UNKNOWN: + default: + UHD_MSG(warning) << "Unknown motherboard type, loading e300 image." + << std::endl; + fpga_image = device_addr.cast<std::string>("fpga", + find_image_path(E300_FPGA_FILE_NAME)); + idle_image = find_image_path(E300_FPGA_IDLE_FILE_NAME); + break; + } +} + /*********************************************************************** * Structors **********************************************************************/ @@ -286,33 +316,10 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr) if (_xport_path == AXI) { _do_not_reload = device_addr.has_key("no_reload_fpga"); if (not _do_not_reload) { - // Load FPGA image if provided via args - const boost::uint16_t pid = boost::lexical_cast<boost::uint16_t>( - device_addr["product"]); - std::string fpga_image; - - //extract the FPGA path for the e300 - switch(e300_eeprom_manager::get_mb_type(pid)) { - case e300_eeprom_manager::USRP_E310_MB: - fpga_image = device_addr.cast<std::string>("fpga", - find_image_path(E310_FPGA_FILE_NAME)); - _idle_image = find_image_path(E310_FPGA_IDLE_FILE_NAME); - break; - case e300_eeprom_manager::USRP_E300_MB: - fpga_image = device_addr.cast<std::string>("fpga", - find_image_path(E300_FPGA_FILE_NAME)); - _idle_image = find_image_path(E300_FPGA_IDLE_FILE_NAME); - break; - case e300_eeprom_manager::UNKNOWN: - default: - UHD_MSG(warning) << "Unknown motherboard type, loading e300 image." - << std::endl; - fpga_image = device_addr.cast<std::string>("fpga", - find_image_path(E300_FPGA_FILE_NAME)); - _idle_image = find_image_path(E300_FPGA_IDLE_FILE_NAME); - break; - } + get_e3x0_fpga_images(device_addr, + fpga_image, + _idle_image); common::load_fpga_image(fpga_image); } } @@ -473,15 +480,14 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr) // internal gpios //////////////////////////////////////////////////////////////////// gpio_core_200::sptr fp_gpio = gpio_core_200::make(_radio_perifs[0].ctrl, TOREG(SR_FP_GPIO), RB32_FP_GPIO); - const std::vector<std::string> gpio_attrs = boost::assign::list_of("CTRL")("DDR")("OUT")("ATR_0X")("ATR_RX")("ATR_TX")("ATR_XX"); - BOOST_FOREACH(const std::string &attr, gpio_attrs) + BOOST_FOREACH(const gpio_attr_map_t::value_type attr, gpio_attr_map) { - _tree->create<boost::uint32_t>(mb_path / "gpio" / "INT0" / attr) - .subscribe(boost::bind(&e300_impl::_set_internal_gpio, this, fp_gpio, attr, _1)) + _tree->create<boost::uint32_t>(mb_path / "gpio" / "INT0" / attr.second) + .subscribe(boost::bind(&e300_impl::_set_internal_gpio, this, fp_gpio, attr.first, _1)) .set(0); } _tree->create<boost::uint8_t>(mb_path / "gpio" / "INT0" / "READBACK") - .publish(boost::bind(&e300_impl::_get_internal_gpio, this, fp_gpio, "READBACK")); + .publish(boost::bind(&e300_impl::_get_internal_gpio, this, fp_gpio)); //////////////////////////////////////////////////////////////////// @@ -587,32 +593,35 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr) boost::this_thread::sleep(boost::posix_time::seconds(1)); } -boost::uint8_t e300_impl::_get_internal_gpio( - gpio_core_200::sptr gpio, - const std::string &) +boost::uint8_t e300_impl::_get_internal_gpio(gpio_core_200::sptr gpio) { return boost::uint32_t(gpio->read_gpio(dboard_iface::UNIT_RX)); } void e300_impl::_set_internal_gpio( gpio_core_200::sptr gpio, - const std::string &attr, + const gpio_attr_t attr, const boost::uint32_t value) { - if (attr == "CTRL") + switch (attr) + { + case GPIO_CTRL: return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value); - else if (attr == "DDR") + case GPIO_DDR: return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value); - else if (attr == "OUT") + case GPIO_OUT: return gpio->set_gpio_out(dboard_iface::UNIT_RX, value); - else if (attr == "ATR_0X") + case GPIO_ATR_0X: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value); - else if (attr == "ATR_RX") + case GPIO_ATR_RX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value); - else if (attr == "ATR_TX") + case GPIO_ATR_TX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value); - else if (attr == "ATR_XX") + case GPIO_ATR_XX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value); + default: + UHD_THROW_INVALID_CODE_PATH(); + } } uhd::sensor_value_t e300_impl::_get_fe_pll_lock(const bool is_tx) @@ -654,6 +663,17 @@ void e300_impl::_enforce_tick_rate_limits( % direction )); } + // Minimum rate restriction due to MMCM used in capture interface to AD9361. + // Xilinx Artix-7 FPGA MMCM minimum input frequency is 10 MHz. + const double min_tick_rate = uhd::usrp::e300::MIN_TICK_RATE / ((chan_count <= 1) ? 1 : 2); + if (tick_rate - min_tick_rate < 0.0) + { + throw uhd::value_error(boost::str( + boost::format("current master clock rate (%.6f MHz) set below minimum possible master clock rate (%.6f MHz)") + % (tick_rate/1e6) + % (min_tick_rate/1e6) + )); + } } } @@ -1040,6 +1060,8 @@ void e300_impl::_setup_radio(const size_t dspno) _tree->create<int>(rf_fe_path / "sensors"); //empty TODO _tree->create<sensor_value_t>(rf_fe_path / "sensors" / "lo_locked") .publish(boost::bind(&e300_impl::_get_fe_pll_lock, this, direction == "tx")); + _tree->create<sensor_value_t>(rf_fe_path / "sensors" / "temp") + .publish(boost::bind(&ad9361_ctrl::get_temperature, _codec_ctrl)); BOOST_FOREACH(const std::string &name, ad9361_ctrl::get_gain_names(key)) { _tree->create<meta_range_t>(rf_fe_path / "gains" / name / "range") @@ -1065,6 +1087,18 @@ void e300_impl::_setup_radio(const size_t dspno) _tree->create<meta_range_t>(rf_fe_path / "freq" / "range") .publish(boost::bind(&ad9361_ctrl::get_rf_freq_range)); + //only in local mode + if(_xport_path == AXI) { + //add all frontend filters + std::vector<std::string> filter_names = _codec_ctrl->get_filter_names(key); + for(size_t i = 0;i < filter_names.size(); i++) + { + _tree->create<filter_info_base::sptr>(rf_fe_path / "filters" / filter_names[i] / "value" ) + .publish(boost::bind(&ad9361_ctrl::get_filter, _codec_ctrl, key, filter_names[i])) + .subscribe(boost::bind(&ad9361_ctrl::set_filter, _codec_ctrl, key, filter_names[i], _1)); + } + } + //setup RX related stuff if (key[0] == 'R') { static const std::vector<std::string> ants = boost::assign::list_of("TX/RX")("RX2"); diff --git a/host/lib/usrp/e300/e300_impl.hpp b/host/lib/usrp/e300/e300_impl.hpp index 7f83c16ed..3ed133489 100644 --- a/host/lib/usrp/e300/e300_impl.hpp +++ b/host/lib/usrp/e300/e300_impl.hpp @@ -1,5 +1,5 @@ // -// Copyright 2013-2014 Ettus Research LLC +// Copyright 2013-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -20,6 +20,7 @@ #include <uhd/device.hpp> #include <uhd/property_tree.hpp> +#include <uhd/types/device_addr.hpp> #include <uhd/usrp/subdev_spec.hpp> #include <uhd/usrp/mboard_eeprom.hpp> #include <uhd/usrp/dboard_eeprom.hpp> @@ -28,6 +29,7 @@ #include <uhd/types/sensors.hpp> #include <boost/weak_ptr.hpp> #include <boost/thread/mutex.hpp> +#include <string> #include "e300_fifo_config.hpp" #include "radio_ctrl_core_3000.hpp" #include "rx_frontend_core_200.hpp" @@ -98,6 +100,10 @@ static const size_t E300_R1_CTRL_STREAM = (1 << 2) | E300_RADIO_DEST_PREFIX_C static const size_t E300_R1_TX_DATA_STREAM = (1 << 2) | E300_RADIO_DEST_PREFIX_TX; static const size_t E300_R1_RX_DATA_STREAM = (1 << 2) | E300_RADIO_DEST_PREFIX_RX; +uhd::device_addrs_t e300_find(const uhd::device_addr_t &multi_dev_hint); +void get_e3x0_fpga_images(const uhd::device_addr_t &device_args, + std::string &fpga_image, + std::string &idle_image); /*! * USRP-E300 implementation guts: @@ -267,13 +273,11 @@ private: // methods uhd::sensor_value_t _get_fe_pll_lock(const bool is_tx); // internal gpios - boost::uint8_t _get_internal_gpio( - gpio_core_200::sptr, - const std::string &); + boost::uint8_t _get_internal_gpio(gpio_core_200::sptr); void _set_internal_gpio( gpio_core_200::sptr gpio, - const std::string &attr, + const gpio_attr_t attr, const boost::uint32_t value); private: // members diff --git a/host/lib/usrp/e300/e300_network.cpp b/host/lib/usrp/e300/e300_network.cpp index 408f9e62d..d68dc4541 100644 --- a/host/lib/usrp/e300/e300_network.cpp +++ b/host/lib/usrp/e300/e300_network.cpp @@ -230,6 +230,27 @@ static void e300_codec_ctrl_tunnel( case codec_xact_t::ACTION_GET_RSSI: out->rssi = _codec_ctrl->get_rssi(which_str).to_real(); break; + case codec_xact_t::ACTION_GET_TEMPERATURE: + out->temp = _codec_ctrl->get_temperature().to_real(); + break; + case codec_xact_t::ACTION_SET_DC_OFFSET_AUTO: + _codec_ctrl->set_dc_offset_auto(which_str, in->use_dc_correction == 1); + break; + case codec_xact_t::ACTION_SET_IQ_BALANCE_AUTO: + _codec_ctrl->set_iq_balance_auto(which_str, in->use_iq_correction == 1); + case codec_xact_t::ACTION_SET_AGC: + _codec_ctrl->set_agc(which_str, in->use_agc == 1); + break; + case codec_xact_t::ACTION_SET_AGC_MODE: + if(in->agc_mode == 0) { + _codec_ctrl->set_agc_mode(which_str, "slow"); + } else if (in->agc_mode == 1) { + _codec_ctrl->set_agc_mode(which_str, "fast"); + } + break; + case codec_xact_t::ACTION_SET_BW: + out->bw = _codec_ctrl->set_bw_filter(which_str, in->bw); + break; default: UHD_MSG(status) << "Got unknown request?!" << std::endl; //Zero out actions to fail this request on client diff --git a/host/lib/usrp/e300/e300_remote_codec_ctrl.cpp b/host/lib/usrp/e300/e300_remote_codec_ctrl.cpp index 6742f5f86..9708634dd 100644 --- a/host/lib/usrp/e300/e300_remote_codec_ctrl.cpp +++ b/host/lib/usrp/e300/e300_remote_codec_ctrl.cpp @@ -130,10 +130,118 @@ public: _args.bits = uhd::htonx<boost::uint32_t>(0); _transact(); - return sensor_value_t("RSSI", _retval.rssi, "dB"); } + sensor_value_t get_temperature() + { + _clear(); + _args.action = uhd::htonx<boost::uint32_t>(transaction_t::ACTION_GET_TEMPERATURE); + _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_NONE); /*Unused*/ + _args.bits = uhd::htonx<boost::uint32_t>(0); + + _transact(); + return sensor_value_t("temp", _retval.temp, "C"); + } + + void set_dc_offset_auto(const std::string &which, const bool on) + { + _clear(); + _args.action = uhd::htonx<boost::uint32_t>(transaction_t::ACTION_SET_DC_OFFSET_AUTO); + if (which == "TX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX1); + else if (which == "TX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX2); + else if (which == "RX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX1); + else if (which == "RX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX2); + else throw std::runtime_error("e300_remote_codec_ctrl_impl incorrect chain string."); + _args.use_dc_correction = on ? 1 : 0; + + _transact(); + } + + void set_iq_balance_auto(const std::string &which, const bool on) + { + _clear(); + _args.action = uhd::htonx<boost::uint32_t>(transaction_t::ACTION_SET_IQ_BALANCE_AUTO); + if (which == "TX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX1); + else if (which == "TX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX2); + else if (which == "RX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX1); + else if (which == "RX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX2); + else throw std::runtime_error("e300_remote_codec_ctrl_impl incorrect chain string."); + _args.use_iq_correction = on ? 1 : 0; + + _transact(); + } + + void set_agc(const std::string &which, bool enable) + { + _clear(); + _args.action = uhd::htonx<boost::uint32_t>(transaction_t::ACTION_SET_AGC); + if (which == "TX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX1); + else if (which == "TX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX2); + else if (which == "RX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX1); + else if (which == "RX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX2); + else throw std::runtime_error("e300_remote_codec_ctrl_impl incorrect chain string."); + _args.use_agc = enable ? 1 : 0; + + _transact(); + } + + void set_agc_mode(const std::string &which, const std::string &mode) + { + _clear(); + _args.action = uhd::htonx<boost::uint32_t>(transaction_t::ACTION_SET_AGC_MODE); + + if (which == "TX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX1); + else if (which == "TX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX2); + else if (which == "RX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX1); + else if (which == "RX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX2); + else throw std::runtime_error("e300_remote_codec_ctrl_impl incorrect chain string."); + + if(mode == "slow") { + _args.agc_mode = 0; + } else if (mode == "fast") { + _args.agc_mode = 1; + } else { + throw std::runtime_error("e300_remote_codec_ctrl_impl incorrect agc mode."); + } + + _transact(); + } + + //! set the filter bandwidth for the frontend's analog low pass + double set_bw_filter(const std::string &which, const double bw) + { + _clear(); + _args.action = uhd::htonx<boost::uint32_t>(transaction_t::ACTION_SET_BW); + if (which == "TX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX1); + else if (which == "TX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_TX2); + else if (which == "RX1") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX1); + else if (which == "RX2") _args.which = uhd::htonx<boost::uint32_t>(transaction_t::CHAIN_RX2); + else throw std::runtime_error("e300_remote_codec_ctrl_impl incorrect chain string."); + _args.bw = bw; + + _transact(); + return _retval.bw; + } + + //! List all available filters by name + std::vector<std::string> get_filter_names(const std::string &) + { + UHD_THROW_INVALID_CODE_PATH(); + } + + //! Return a list of all filters + filter_info_base::sptr get_filter(const std::string &, const std::string &) + { + UHD_THROW_INVALID_CODE_PATH(); + } + + //! Write back a filter + void set_filter(const std::string &, const std::string &, const filter_info_base::sptr) + { + UHD_THROW_INVALID_CODE_PATH(); + } + private: void _transact() { { diff --git a/host/lib/usrp/e300/e300_remote_codec_ctrl.hpp b/host/lib/usrp/e300/e300_remote_codec_ctrl.hpp index e21f2ef95..43723e0d5 100644 --- a/host/lib/usrp/e300/e300_remote_codec_ctrl.hpp +++ b/host/lib/usrp/e300/e300_remote_codec_ctrl.hpp @@ -34,6 +34,12 @@ public: double gain; double freq; double rssi; + double temp; + double bw; + boost::uint32_t use_dc_correction; + boost::uint32_t use_iq_correction; + boost::uint32_t use_agc; + boost::uint32_t agc_mode; boost::uint64_t bits; }; @@ -44,7 +50,13 @@ public: static const boost::uint32_t ACTION_TUNE = 13; static const boost::uint32_t ACTION_SET_LOOPBACK = 14; static const boost::uint32_t ACTION_GET_RSSI = 15; - static const boost::uint32_t ACTION_GET_FREQ = 16; + static const boost::uint32_t ACTION_GET_TEMPERATURE = 16; + static const boost::uint32_t ACTION_SET_DC_OFFSET_AUTO = 17; + static const boost::uint32_t ACTION_SET_IQ_BALANCE_AUTO = 18; + static const boost::uint32_t ACTION_SET_AGC = 19; + static const boost::uint32_t ACTION_SET_AGC_MODE = 20; + static const boost::uint32_t ACTION_SET_BW = 21; + static const boost::uint32_t ACTION_GET_FREQ = 22; //Values for "which" static const boost::uint32_t CHAIN_NONE = 0; diff --git a/host/lib/usrp/mboard_eeprom.cpp b/host/lib/usrp/mboard_eeprom.cpp index 68c084589..9c92fe252 100644 --- a/host/lib/usrp/mboard_eeprom.cpp +++ b/host/lib/usrp/mboard_eeprom.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010-2013 Ettus Research LLC +// Copyright 2010-2013,2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -16,6 +16,7 @@ // #include <uhd/usrp/mboard_eeprom.hpp> +#include <uhd/types/byte_vector.hpp> #include <uhd/types/mac_addr.hpp> #include <uhd/utils/byteswap.hpp> #include <boost/asio/ip/address_v4.hpp> @@ -39,32 +40,6 @@ static const size_t NAME_MAX_LEN = 32 - SERIAL_LEN; * Utility functions **********************************************************************/ -//! A wrapper around std::copy that takes ranges instead of iterators. -template<typename RangeSrc, typename RangeDst> inline -void byte_copy(const RangeSrc &src, RangeDst &dst){ - std::copy(boost::begin(src), boost::end(src), boost::begin(dst)); -} - -//! create a string from a byte vector, return empty if invalid ascii -static const std::string bytes_to_string(const byte_vector_t &bytes){ - std::string out; - BOOST_FOREACH(boost::uint8_t byte, bytes){ - if (byte < 32 or byte > 127) return out; - out += byte; - } - return out; -} - -//! create a byte vector from a string, null terminate unless max length -static const byte_vector_t string_to_bytes(const std::string &string, size_t max_length){ - byte_vector_t bytes; - for (size_t i = 0; i < std::min(string.size(), max_length); i++){ - bytes.push_back(string[i]); - } - if (bytes.size() < max_length - 1) bytes.push_back('\0'); - return bytes; -} - //! convert a string to a byte vector to write to eeprom static byte_vector_t string_to_uint16_bytes(const std::string &num_str){ const boost::uint16_t num = boost::lexical_cast<boost::uint16_t>(num_str); diff --git a/host/lib/usrp/multi_usrp.cpp b/host/lib/usrp/multi_usrp.cpp index 794438b90..1866255c9 100644 --- a/host/lib/usrp/multi_usrp.cpp +++ b/host/lib/usrp/multi_usrp.cpp @@ -30,6 +30,8 @@ #include <boost/thread.hpp> #include <boost/foreach.hpp> #include <boost/format.hpp> +#include <boost/algorithm/string.hpp> +#include <algorithm> #include <cmath> using namespace uhd; @@ -431,6 +433,9 @@ public: ******************************************************************/ void set_master_clock_rate(double rate, size_t mboard){ if (mboard != ALL_MBOARDS){ + if (_tree->exists(mb_root(mboard) / "auto_tick_rate")) { + _tree->access<bool>(mb_root(mboard) / "auto_tick_rate").set(false); + } _tree->access<double>(mb_root(mboard) / "tick_rate").set(rate); return; } @@ -821,6 +826,26 @@ public: } void set_rx_gain(double gain, const std::string &name, size_t chan){ + /* Check if any AGC mode is enable and if so warn the user */ + if (chan != ALL_CHANS) { + if (_tree->exists(rx_rf_fe_root(chan) / "gain" / "agc")) { + bool agc = _tree->access<bool>(rx_rf_fe_root(chan) / "gain" / "agc" / "enable").get(); + if(agc) { + UHD_MSG(warning) << "AGC enabled for this channel. Setting will be ignored." << std::endl; + } + } + } else { + for (size_t c = 0; c < get_rx_num_channels(); c++){ + if (_tree->exists(rx_rf_fe_root(c) / "gain" / "agc")) { + bool agc = _tree->access<bool>(rx_rf_fe_root(chan) / "gain" / "agc" / "enable").get(); + if(agc) { + UHD_MSG(warning) << "AGC enabled for this channel. Setting will be ignored." << std::endl; + } + } + } + } + /* Apply gain setting. + * If device is in AGC mode it will ignore the setting. */ try { return rx_gain_group(chan)->set_value(gain, name); } catch (uhd::key_error &) { @@ -828,6 +853,32 @@ public: } } + void set_normalized_rx_gain(double gain, size_t chan = 0) + { + if (gain > 1.0 || gain < 0.0) { + throw uhd::runtime_error("Normalized gain out of range, must be in [0, 1]."); + } + gain_range_t gain_range = get_rx_gain_range(ALL_GAINS, chan); + double abs_gain = (gain * (gain_range.stop() - gain_range.start())) + gain_range.start(); + set_rx_gain(abs_gain, ALL_GAINS, chan); + } + + void set_rx_agc(bool enable, size_t chan = 0) + { + if (chan != ALL_CHANS){ + if (_tree->exists(rx_rf_fe_root(chan) / "gain" / "agc" / "enable")) { + _tree->access<bool>(rx_rf_fe_root(chan) / "gain" / "agc" / "enable").set(enable); + } else { + UHD_MSG(warning) << "AGC is not available on this device." << std::endl; + } + return; + } + for (size_t c = 0; c < get_rx_num_channels(); c++){ + this->set_rx_agc(enable, c); + } + + } + double get_rx_gain(const std::string &name, size_t chan){ try { return rx_gain_group(chan)->get_value(name); @@ -836,6 +887,21 @@ public: } } + double get_normalized_rx_gain(size_t chan) + { + gain_range_t gain_range = get_rx_gain_range(ALL_GAINS, chan); + double gain_range_width = gain_range.stop() - gain_range.start(); + // In case we have a device without a range of gains: + if (gain_range_width == 0.0) { + return 0; + } + double norm_gain = (get_rx_gain(ALL_GAINS, chan) - gain_range.start()) / gain_range_width; + // Avoid rounding errors: + if (norm_gain > 1.0) return 1.0; + if (norm_gain < 0.0) return 0.0; + return norm_gain; + } + gain_range_t get_rx_gain_range(const std::string &name, size_t chan){ try { return rx_gain_group(chan)->get_range(name); @@ -888,6 +954,9 @@ public: if (chan != ALL_CHANS){ if (_tree->exists(rx_fe_root(chan) / "dc_offset" / "enable")) { _tree->access<bool>(rx_fe_root(chan) / "dc_offset" / "enable").set(enb); + } else if (_tree->exists(rx_rf_fe_root(chan) / "dc_offset" / "enable")) { + /*For B2xx devices the dc-offset correction is implemented in the rf front-end*/ + _tree->access<bool>(rx_rf_fe_root(chan) / "dc_offset" / "enable").set(enb); } else { UHD_MSG(warning) << "Setting DC offset compensation is not possible on this device." << std::endl; } @@ -912,6 +981,20 @@ public: } } + void set_rx_iq_balance(const bool enb, size_t chan){ + if (chan != ALL_CHANS){ + if (_tree->exists(rx_rf_fe_root(chan) / "iq_balance" / "enable")) { + _tree->access<bool>(rx_rf_fe_root(chan) / "iq_balance" / "enable").set(enb); + } else { + UHD_MSG(warning) << "Setting IQ imbalance compensation is not possible on this device." << std::endl; + } + return; + } + for (size_t c = 0; c < get_rx_num_channels(); c++){ + this->set_rx_iq_balance(enb, c); + } + } + void set_rx_iq_balance(const std::complex<double> &offset, size_t chan){ if (chan != ALL_CHANS){ if (_tree->exists(rx_fe_root(chan) / "iq_balance" / "value")) { @@ -926,6 +1009,87 @@ public: } } + std::vector<std::string> get_filter_names(const std::string &search_mask) + { + std::vector<std::string> ret; + + for (size_t chan = 0; chan < get_rx_num_channels(); chan++){ + + if (_tree->exists(rx_rf_fe_root(chan) / "filters")) { + std::vector<std::string> names = _tree->list(rx_rf_fe_root(chan) / "filters"); + for(size_t i = 0; i < names.size(); i++) + { + std::string name = rx_rf_fe_root(chan) / "filters" / names[i]; + if((search_mask.empty()) or boost::contains(name, search_mask)) { + ret.push_back(name); + } + } + } + if (_tree->exists(rx_dsp_root(chan) / "filters")) { + std::vector<std::string> names = _tree->list(rx_dsp_root(chan) / "filters"); + for(size_t i = 0; i < names.size(); i++) + { + std::string name = rx_dsp_root(chan) / "filters" / names[i]; + if((search_mask.empty()) or (boost::contains(name, search_mask))) { + ret.push_back(name); + } + } + } + + } + + for (size_t chan = 0; chan < get_tx_num_channels(); chan++){ + + if (_tree->exists(tx_rf_fe_root(chan) / "filters")) { + std::vector<std::string> names = _tree->list(tx_rf_fe_root(chan) / "filters"); + for(size_t i = 0; i < names.size(); i++) + { + std::string name = tx_rf_fe_root(chan) / "filters" / names[i]; + if((search_mask.empty()) or (boost::contains(name, search_mask))) { + ret.push_back(name); + } + } + } + if (_tree->exists(rx_dsp_root(chan) / "filters")) { + std::vector<std::string> names = _tree->list(tx_dsp_root(chan) / "filters"); + for(size_t i = 0; i < names.size(); i++) + { + std::string name = tx_dsp_root(chan) / "filters" / names[i]; + if((search_mask.empty()) or (boost::contains(name, search_mask))) { + ret.push_back(name); + } + } + } + + } + + return ret; + } + + filter_info_base::sptr get_filter(const std::string &path) + { + std::vector<std::string> possible_names = get_filter_names(""); + std::vector<std::string>::iterator it; + it = find(possible_names.begin(), possible_names.end(), path); + if (it == possible_names.end()) { + throw uhd::runtime_error("Attempting to get non-existing filter: "+path); + } + + return _tree->access<filter_info_base::sptr>(path / "value").get(); + } + + void set_filter(const std::string &path, filter_info_base::sptr filter) + { + std::vector<std::string> possible_names = get_filter_names(""); + std::vector<std::string>::iterator it; + it = find(possible_names.begin(), possible_names.end(), path); + if (it == possible_names.end()) { + throw uhd::runtime_error("Attempting to set non-existing filter: "+path); + } + + _tree->access<filter_info_base::sptr>(path / "value").set(filter); + } + /******************************************************************* * TX methods ******************************************************************/ @@ -1029,6 +1193,17 @@ public: } } + void set_normalized_tx_gain(double gain, size_t chan = 0) + { + if (gain > 1.0 || gain < 0.0) { + throw uhd::runtime_error("Normalized gain out of range, must be in [0, 1]."); + } + gain_range_t gain_range = get_tx_gain_range(ALL_GAINS, chan); + double abs_gain = (gain * (gain_range.stop() - gain_range.start())) + gain_range.start(); + set_tx_gain(abs_gain, ALL_GAINS, chan); + } + + double get_tx_gain(const std::string &name, size_t chan){ try { return tx_gain_group(chan)->get_value(name); @@ -1037,6 +1212,21 @@ public: } } + double get_normalized_tx_gain(size_t chan) + { + gain_range_t gain_range = get_tx_gain_range(ALL_GAINS, chan); + double gain_range_width = gain_range.stop() - gain_range.start(); + // In case we have a device without a range of gains: + if (gain_range_width == 0.0) { + return 0.0; + } + double norm_gain = (get_rx_gain(ALL_GAINS, chan) - gain_range.start()) / gain_range_width; + // Avoid rounding errors: + if (norm_gain > 1.0) return 1.0; + if (norm_gain < 0.0) return 0.0; + return norm_gain; + } + gain_range_t get_tx_gain_range(const std::string &name, size_t chan){ try { return tx_gain_group(chan)->get_range(name); diff --git a/host/lib/usrp/usrp2/CMakeLists.txt b/host/lib/usrp/usrp2/CMakeLists.txt index c6257c7fe..bd302895b 100644 --- a/host/lib/usrp/usrp2/CMakeLists.txt +++ b/host/lib/usrp/usrp2/CMakeLists.txt @@ -1,5 +1,5 @@ # -# Copyright 2011-2012,2014 Ettus Research LLC +# Copyright 2011-2012,2014-2015 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -25,18 +25,6 @@ LIBUHD_REGISTER_COMPONENT("USRP2" ENABLE_USRP2 ON "ENABLE_LIBUHD" OFF) IF(ENABLE_USRP2) - ######################################################################## - # Define UHD_PKG_DATA_PATH for usrp2_iface.cpp - ######################################################################## - FILE(TO_NATIVE_PATH ${CMAKE_INSTALL_PREFIX} UHD_PKG_PATH) - STRING(REPLACE "\\" "\\\\" UHD_PKG_PATH ${UHD_PKG_PATH}) - - SET_SOURCE_FILES_PROPERTIES( - ${CMAKE_CURRENT_SOURCE_DIR}/usrp2_iface.cpp - PROPERTIES COMPILE_DEFINITIONS - "UHD_LIB_DIR=\"lib${LIB_SUFFIX}\"" - ) - LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/clock_ctrl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/codec_ctrl.cpp @@ -45,5 +33,6 @@ IF(ENABLE_USRP2) ${CMAKE_CURRENT_SOURCE_DIR}/usrp2_iface.cpp ${CMAKE_CURRENT_SOURCE_DIR}/usrp2_impl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/usrp2_fifo_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/n200_image_loader.cpp ) ENDIF(ENABLE_USRP2) diff --git a/host/lib/usrp/usrp2/n200_image_loader.cpp b/host/lib/usrp/usrp2/n200_image_loader.cpp new file mode 100644 index 000000000..ce956c22c --- /dev/null +++ b/host/lib/usrp/usrp2/n200_image_loader.cpp @@ -0,0 +1,616 @@ +// +// Copyright 2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <cstring> +#include <iostream> +#include <fstream> + +#include <boost/asio/ip/address_v4.hpp> +#include <boost/assign.hpp> +#include <boost/filesystem.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <boost/algorithm/string/erase.hpp> + +#include <uhd/config.hpp> +#include <uhd/image_loader.hpp> +#include <uhd/exception.hpp> +#include <uhd/transport/if_addrs.hpp> +#include <uhd/transport/udp_simple.hpp> +#include <uhd/utils/byteswap.hpp> +#include <uhd/utils/paths.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/types/dict.hpp> + +#include "fw_common.h" +#include "usrp2_iface.hpp" +#include "usrp2_impl.hpp" + +typedef boost::asio::ip::address_v4 ip_v4; + +namespace fs = boost::filesystem; +using namespace boost::algorithm; + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; + +/* + * Constants + */ + +#define N200_FLASH_DATA_PACKET_SIZE 256 +#define N200_UDP_FW_UPDATE_PORT 49154 +#define UDP_TIMEOUT 0.5 + +#define N200_FW_MAX_SIZE_BYTES 31744 +#define N200_PROD_FW_IMAGE_ADDR 0x00300000 +#define N200_SAFE_FW_IMAGE_ADDR 0x003F0000 + +#define N200_FPGA_MAX_SIZE_BYTES 1572864 +#define N200_PROD_FPGA_IMAGE_ADDR 0x00180000 +#define N200_SAFE_FPGA_IMAGE_ADDR 0x00000000 + +/* + * Packet codes + */ +typedef enum { + UNKNOWN = ' ', + + N200_QUERY = 'a', + N200_ACK = 'A', + + GET_FLASH_INFO_CMD = 'f', + GET_FLASH_INFO_ACK = 'F', + + ERASE_FLASH_CMD = 'e', + ERASE_FLASH_ACK = 'E', + + CHECK_ERASING_DONE_CMD = 'd', + DONE_ERASING_ACK = 'D', + NOT_DONE_ERASING_ACK = 'B', + + WRITE_FLASH_CMD = 'w', + WRITE_FLASH_ACK = 'W', + + READ_FLASH_CMD = 'r', + READ_FLASH_ACK = 'R', + + RESET_CMD = 's', + RESET_ACK = 'S', + + GET_HW_REV_CMD = 'v', + GET_HW_REV_ACK = 'V', +} n200_fw_update_id_t; + +/* + * Mapping revision numbers to names + */ +static const uhd::dict<boost::uint32_t, std::string> n200_filename_map = boost::assign::map_list_of + (0, "n2xx") // Is an N-Series, but the EEPROM value is invalid + (0xa, "n200_r3") + (0x100a, "n200_r4") + (0x10a, "n210_r3") + (0x110a, "n210_r4") +; + +/* + * Packet structure + */ +typedef struct { + boost::uint32_t proto_ver; + boost::uint32_t id; + boost::uint32_t seq; + union { + boost::uint32_t ip_addr; + boost::uint32_t hw_rev; + struct { + boost::uint32_t flash_addr; + boost::uint32_t length; + boost::uint8_t data[256]; + } flash_args; + struct { + boost::uint32_t sector_size_bytes; + boost::uint32_t memory_size_bytes; + } flash_info_args; + } data; +} n200_fw_update_data_t; + +/* + * N-Series burn session + */ +typedef struct { + bool fw; + bool overwrite_safe; + bool reset; + uhd::device_addr_t dev_addr; + std::string burn_type; + std::string filepath; + boost::uint8_t data_in[udp_simple::mtu]; + boost::uint32_t size; + boost::uint32_t max_size; + boost::uint32_t flash_addr; + udp_simple::sptr xport; +} n200_session_t; + +/*********************************************************************** + * uhd::image_loader functionality + **********************************************************************/ + +static void print_usrp2_error(const image_loader::image_loader_args_t &image_loader_args){ + #ifdef UHD_PLATFORM_WIN32 + std::string usrp2_card_burner_gui = "\""; + const std::string nl = " ^\n "; + #else + std::string usrp2_card_burner_gui = "sudo \""; + const std::string nl = " \\\n "; + #endif + + usrp2_card_burner_gui += find_utility("usrp2_card_burner_gui.py"); + usrp2_card_burner_gui += "\""; + + if(image_loader_args.load_firmware){ + usrp2_card_burner_gui += str(boost::format("%s--fw=\"%s\"") + % nl + % ((image_loader_args.firmware_path == "") + ? find_image_path("usrp2_fw.bin") + : image_loader_args.firmware_path)); + } + if(image_loader_args.load_fpga){ + usrp2_card_burner_gui += str(boost::format("%s--fpga=\"%s\"") + % nl + % ((image_loader_args.fpga_path == "") + ? find_image_path("usrp2_fpga.bin") + : image_loader_args.fpga_path)); + } + + throw uhd::runtime_error(str(boost::format("The specified device is a USRP2, which is not supported by this utility.\n" + "Instead, plug the device's SD card into your machine and run this command:\n\n" + "%s" + ) % usrp2_card_burner_gui)); +} + +/* + * Ethernet communication functions + */ +static UHD_INLINE size_t n200_send_and_recv(udp_simple::sptr xport, + n200_fw_update_id_t pkt_code, + n200_fw_update_data_t *pkt_out, + boost::uint8_t* data){ + pkt_out->proto_ver = htonx<boost::uint32_t>(USRP2_FW_COMPAT_NUM); + pkt_out->id = htonx<boost::uint32_t>(pkt_code); + xport->send(boost::asio::buffer(pkt_out, sizeof(*pkt_out))); + return xport->recv(boost::asio::buffer(data, udp_simple::mtu), UDP_TIMEOUT); +} + +static UHD_INLINE bool n200_response_matches(const n200_fw_update_data_t *pkt_in, + n200_fw_update_id_t pkt_code, + size_t len){ + return (len > offsetof(n200_fw_update_data_t, data) and + ntohl(pkt_in->id) == pkt_code); +} + +static uhd::device_addr_t n200_find(const image_loader::image_loader_args_t &image_loader_args){ + bool user_specified = image_loader_args.args.has_key("addr") or + image_loader_args.args.has_key("serial") or + image_loader_args.args.has_key("name"); + + uhd::device_addrs_t found = usrp2_find(image_loader_args.args); + if(found.size() > 0){ + uhd::device_addr_t ret = found[0]; + + /* + * Make sure the device found is an N-Series and not a USRP2. A USRP2 + * will not respond to this query. If the user supplied specific + * arguments that led to a USRP2, throw an error. + */ + udp_simple::sptr rev_xport = udp_simple::make_connected( + ret["addr"], + BOOST_STRINGIZE(N200_UDP_FW_UPDATE_PORT) + ); + + n200_fw_update_data_t pkt_out; + boost::uint8_t data_in[udp_simple::mtu]; + const n200_fw_update_data_t *pkt_in = reinterpret_cast<const n200_fw_update_data_t*>(data_in); + + size_t len = n200_send_and_recv(rev_xport, GET_HW_REV_CMD, &pkt_out, data_in); + if(n200_response_matches(pkt_in, GET_HW_REV_ACK, len)){ + boost::uint32_t rev = ntohl(pkt_in->data.hw_rev); + ret["hw_rev"] = n200_filename_map.get(rev, "n2xx"); + return ret; + } + else if(len > offsetof(n200_fw_update_data_t, data) and ntohl(pkt_in->id) != GET_HW_REV_ACK){ + throw uhd::runtime_error(str(boost::format("Received invalid reply %d from device.") + % ntohl(pkt_in->id))); + } + else if(user_specified){ + // At this point, we haven't received any response, so assume it's a USRP2 + print_usrp2_error(image_loader_args); + } + } + + return uhd::device_addr_t(); +} + +/* + * Validate and read firmware image + */ +static void n200_validate_firmware_image(n200_session_t &session){ + if(not fs::exists(session.filepath)){ + throw uhd::runtime_error(str(boost::format("Could not find image at path \"%s\".") + % session.filepath)); + } + + session.size = fs::file_size(session.filepath); + session.max_size = N200_FW_MAX_SIZE_BYTES; + + if(session.size > session.max_size){ + throw uhd::runtime_error(str(boost::format("The specified FPGA image is too large: %d vs. %d") + % session.size % session.max_size)); + } + + // File must have proper header + std::ifstream image_file(session.filepath.c_str(), std::ios::binary); + boost::uint8_t test_bytes[4]; + image_file.seekg(0, std::ios::beg); + image_file.read((char*)test_bytes,4); + image_file.close(); + for(int i = 0; i < 4; i++) if(test_bytes[i] != 11){ + throw uhd::runtime_error(str(boost::format("The file at path \"%s\" is not a valid firmware image.") + % session.filepath)); + } +} + +/* + * Validate and validate FPGA image + */ +static void n200_validate_fpga_image(n200_session_t &session){ + if(not fs::exists(session.filepath)){ + throw uhd::runtime_error(str(boost::format("Could not find image at path \"%s\".") + % session.filepath)); + } + + session.size = fs::file_size(session.filepath); + session.max_size = N200_FPGA_MAX_SIZE_BYTES; + + if(session.size > session.max_size){ + throw uhd::runtime_error(str(boost::format("The specified FPGA image is too large: %d vs. %d") + % session.size % session.max_size)); + } + + // File must have proper header + std::ifstream image_file(session.filepath.c_str(), std::ios::binary); + boost::uint8_t test_bytes[63]; + image_file.seekg(0, std::ios::beg); + image_file.read((char*)test_bytes, 63); + bool is_good = false; + for(int i = 0; i < 63; i++){ + if(test_bytes[i] == 255) continue; + else if(test_bytes[i] == 170 and + test_bytes[i+1] == 153){ + is_good = true; + break; + } + } + image_file.close(); + if(not is_good){ + throw uhd::runtime_error(str(boost::format("The file at path \"%s\" is not a valid FPGA image.") + % session.filepath)); + } +} + +/* + * Set up a session for burning an N-Series image. This session info + * will be passed into the erase, burn, and verify functions. + */ +static void n200_setup_session(n200_session_t &session, + const image_loader::image_loader_args_t &image_loader_args, + bool fw){ + + + session.fw = fw; + session.reset = image_loader_args.args.has_key("reset"); + + /* + * If no filepath is given, attempt to determine the default image by + * querying the device for its revision. If the device has a corrupt + * EEPROM or is otherwise unable to provide its revision, this is + * impossible, and the user must manually provide a firmware file. + */ + if((session.fw and image_loader_args.firmware_path == "") or + image_loader_args.fpga_path == ""){ + if(session.dev_addr["hw_rev"] == "n2xx"){ + throw uhd::runtime_error("This device's revision cannot be determined. " + "You must manually specify a filepath."); + } + else{ + session.filepath = session.fw ? find_image_path(str(boost::format("usrp_%s_fw.bin") + % erase_tail_copy(session.dev_addr["hw_rev"],3))) + : find_image_path(str(boost::format("usrp_%s_fpga.bin") + % session.dev_addr["hw_rev"])); + } + } + else{ + session.filepath = session.fw ? image_loader_args.firmware_path + : image_loader_args.fpga_path; + } + if(session.fw) n200_validate_firmware_image(session); + else n200_validate_fpga_image(session); + + session.overwrite_safe = image_loader_args.args.has_key("overwrite-safe"); + if(session.overwrite_safe){ + session.flash_addr = session.fw ? N200_SAFE_FW_IMAGE_ADDR + : N200_SAFE_FPGA_IMAGE_ADDR; + session.burn_type = session.fw ? "firmware safe" + : "FPGA safe"; + } + else{ + session.flash_addr = session.fw ? N200_PROD_FW_IMAGE_ADDR + : N200_PROD_FPGA_IMAGE_ADDR; + session.burn_type = session.fw ? "firmware" + : "FPGA"; + } + + session.xport = udp_simple::make_connected(session.dev_addr["addr"], + BOOST_STRINGIZE(N200_UDP_FW_UPDATE_PORT)); +} + +static void n200_erase_image(n200_session_t &session){ + + // UDP receive buffer + n200_fw_update_data_t pkt_out; + const n200_fw_update_data_t *pkt_in = reinterpret_cast<const n200_fw_update_data_t*>(session.data_in); + + // Setting up UDP packet + pkt_out.data.flash_args.flash_addr = htonx<boost::uint32_t>(session.flash_addr); + pkt_out.data.flash_args.length = htonx<boost::uint32_t>(session.size); + + // Begin erasing + size_t len = n200_send_and_recv(session.xport, ERASE_FLASH_CMD, &pkt_out, session.data_in); + if(n200_response_matches(pkt_in, ERASE_FLASH_ACK, len)){ + std::cout << boost::format("-- Erasing %s image...") % session.burn_type << std::flush; + } + else if(len < offsetof(n200_fw_update_data_t, data)){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Timed out waiting for reply from device."); + } + else if(ntohl(pkt_in->id) != ERASE_FLASH_ACK){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error(str(boost::format("Received invalid reply %d from device.\n") + % ntohl(pkt_in->id))); + } + else{ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Did not receive response from device."); + } + + // Check for erase completion + while(true){ + len = n200_send_and_recv(session.xport, CHECK_ERASING_DONE_CMD, &pkt_out, session.data_in); + if(n200_response_matches(pkt_in, DONE_ERASING_ACK, len)){ + std::cout << "successful." << std::endl; + break; + } + else if(len < offsetof(n200_fw_update_data_t, data)){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Timed out waiting for reply from device."); + } + else if(ntohl(pkt_in->id) != NOT_DONE_ERASING_ACK){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error(str(boost::format("Received invalid reply %d from device.\n") + % ntohl(pkt_in->id))); + } + } +} + +static void n200_write_image(n200_session_t &session){ + + // UDP receive buffer + n200_fw_update_data_t pkt_out; + const n200_fw_update_data_t *pkt_in = reinterpret_cast<const n200_fw_update_data_t*>(session.data_in); + size_t len = 0; + + // Write image + std::ifstream image(session.filepath.c_str(), std::ios::binary); + boost::uint32_t current_addr = session.flash_addr; + pkt_out.data.flash_args.length = htonx<boost::uint32_t>(N200_FLASH_DATA_PACKET_SIZE); + for(size_t i = 0; i < ((session.size/N200_FLASH_DATA_PACKET_SIZE)+1); i++){ + pkt_out.data.flash_args.flash_addr = htonx<boost::uint32_t>(current_addr); + memset(pkt_out.data.flash_args.data, 0x0, N200_FLASH_DATA_PACKET_SIZE); + image.read((char*)pkt_out.data.flash_args.data, N200_FLASH_DATA_PACKET_SIZE); + + len = n200_send_and_recv(session.xport, WRITE_FLASH_CMD, &pkt_out, session.data_in); + if(n200_response_matches(pkt_in, WRITE_FLASH_ACK, len)){ + std::cout << boost::format("\r-- Writing %s image (%d%%)") + % session.burn_type + % int((double(current_addr-session.flash_addr)/double(session.size))*100) + << std::flush; + } + else if(len < offsetof(n200_fw_update_data_t, data)){ + image.close(); + std::cout << boost::format("\r--Writing %s image..failed at %d%%.") + % session.burn_type + % int((double(current_addr-session.flash_addr)/double(session.size))*100) + << std::endl; + throw uhd::runtime_error("Timed out waiting for reply from device."); + } + else if(ntohl(pkt_in->id) != WRITE_FLASH_ACK){ + image.close(); + std::cout << boost::format("\r--Writing %s image..failed at %d%%.") + % session.burn_type + % int((double(current_addr-session.flash_addr)/double(session.size))*100) + << std::endl; + throw uhd::runtime_error(str(boost::format("Received invalid reply %d from device.\n") + % ntohl(pkt_in->id))); + } + + current_addr += N200_FLASH_DATA_PACKET_SIZE; + } + std::cout << boost::format("\r-- Writing %s image...successful.") + % session.burn_type + << std::endl; + + image.close(); +} + +static void n200_verify_image(n200_session_t &session){ + + // UDP receive buffer + n200_fw_update_data_t pkt_out; + const n200_fw_update_data_t *pkt_in = reinterpret_cast<const n200_fw_update_data_t*>(session.data_in); + size_t len = 0; + + // Read and verify image + std::ifstream image(session.filepath.c_str(), std::ios::binary); + boost::uint8_t image_part[N200_FLASH_DATA_PACKET_SIZE]; + boost::uint32_t current_addr = session.flash_addr; + pkt_out.data.flash_args.length = htonx<boost::uint32_t>(N200_FLASH_DATA_PACKET_SIZE); + boost::uint16_t cmp_len = 0; + for(size_t i = 0; i < ((session.size/N200_FLASH_DATA_PACKET_SIZE)+1); i++){ + memset(image_part, 0x0, N200_FLASH_DATA_PACKET_SIZE); + memset((void*)pkt_in->data.flash_args.data, 0x0, N200_FLASH_DATA_PACKET_SIZE); + + pkt_out.data.flash_args.flash_addr = htonx<boost::uint32_t>(current_addr); + image.read((char*)image_part, N200_FLASH_DATA_PACKET_SIZE); + cmp_len = image.gcount(); + + len = n200_send_and_recv(session.xport, READ_FLASH_CMD, &pkt_out, session.data_in); + if(n200_response_matches(pkt_in, READ_FLASH_ACK, len)){ + std::cout << boost::format("\r-- Verifying %s image (%d%%)") + % session.burn_type + % int((double(current_addr-session.flash_addr)/double(session.size))*100) + << std::flush; + + if(memcmp(image_part, pkt_in->data.flash_args.data, cmp_len)){ + std::cout << boost::format("\r-- Verifying %s image...failed at %d%%.") + % session.burn_type + % int((double(current_addr-session.flash_addr)/double(session.size))*100) + << std::endl; + throw uhd::runtime_error(str(boost::format("Failed to verify %s image.") + % session.burn_type)); + } + } + else if(len < offsetof(n200_fw_update_data_t, data)){ + image.close(); + std::cout << boost::format("\r-- Verifying %s image...failed at %d%%.") + % session.burn_type + % int((double(current_addr-session.flash_addr)/double(session.size))*100) + << std::endl; + throw uhd::runtime_error("Timed out waiting for reply from device."); + } + else if(ntohl(pkt_in->id) != READ_FLASH_ACK){ + image.close(); + std::cout << boost::format("\r-- Verifying %s image...failed at %d%%.") + % session.burn_type + % int((double(current_addr-session.flash_addr)/double(session.size))*100) + << std::endl; + throw uhd::runtime_error(str(boost::format("Received invalid reply %d from device.\n") + % ntohl(pkt_in->id))); + } + + current_addr += N200_FLASH_DATA_PACKET_SIZE; + } + std::cout << boost::format("\r-- Verifying %s image...successful.") % session.burn_type + << std::endl; + + image.close(); +} + +static void n200_reset(n200_session_t &session){ + + // UDP receive buffer + n200_fw_update_data_t pkt_out; + + // There should be no response + std::cout << "-- Resetting device..." << std::flush; + size_t len = n200_send_and_recv(session.xport, RESET_CMD, &pkt_out, session.data_in); + if(len > 0){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Failed to reset N200."); + } + std::cout << "successful." << std::endl; +} + +// n210_r4 -> N210 r4 +static std::string nice_name(const std::string &fw_rev){ + std::string ret = fw_rev; + ret[0] = ::toupper(ret[0]); + + size_t pos = 0; + if((pos = fw_rev.find("_")) != std::string::npos){ + ret[pos] = ' '; + } + + return ret; +} + +static bool n200_image_loader(const image_loader::image_loader_args_t &image_loader_args){ + // See if any N2x0 with the given args is found + // This will throw if specific args lead to a USRP2 + n200_session_t session; + session.dev_addr = n200_find(image_loader_args); + if(session.dev_addr.size() == 0 or (!image_loader_args.load_firmware and !image_loader_args.load_fpga)){ + return false; + } + + std::cout << boost::format("Unit: USRP %s (%s, %s)") + % nice_name(session.dev_addr.get("hw_rev")) + % session.dev_addr.get("serial") + % session.dev_addr.get("addr") + << std::endl; + + if(image_loader_args.load_firmware){ + n200_setup_session(session, + image_loader_args, + true + ); + + std::cout << "Firmware image: " << session.filepath << std::endl; + + n200_erase_image(session); + n200_write_image(session); + n200_verify_image(session); + if(session.reset and !image_loader_args.load_fpga){ + n200_reset(session); + } + } + if(image_loader_args.load_fpga){ + n200_setup_session(session, + image_loader_args, + false + ); + + std::cout << "FPGA image: " << session.filepath << std::endl; + + n200_erase_image(session); + n200_write_image(session); + n200_verify_image(session); + if(session.reset){ + n200_reset(session); + } + } + + return true; +} + +UHD_STATIC_BLOCK(register_n200_image_loader){ + std::string recovery_instructions = "Aborting. Your USRP-N Series unit will likely be unusable.\n" + "Refer to http://files.ettus.com/manual/page_usrp2.html#usrp2_loadflash_brick\n" + "for details on restoring your device."; + + image_loader::register_image_loader("usrp2", n200_image_loader, recovery_instructions); +} diff --git a/host/lib/usrp/usrp2/usrp2_iface.cpp b/host/lib/usrp/usrp2/usrp2_iface.cpp index 1d41173f8..2b382ae38 100644 --- a/host/lib/usrp/usrp2/usrp2_iface.cpp +++ b/host/lib/usrp/usrp2/usrp2_iface.cpp @@ -387,15 +387,15 @@ public: //create the burner commands if (this->get_rev() == USRP2_REV3 or this->get_rev() == USRP2_REV4){ - const std::string card_burner = (fs::path(uhd::get_pkg_path()) / UHD_LIB_DIR / "uhd" / "utils" / "usrp2_card_burner_gui.py").string(); - const std::string card_burner_cmd = str(boost::format("\"%s%s\" %s--fpga=\"%s\" %s--fw=\"%s\"") % sudo % card_burner % ml % fpga_image_path % ml % fw_image_path); + const std::string card_burner = uhd::find_utility("usrp2_card_burner_gui.py"); + const std::string card_burner_cmd = str(boost::format(" %s\"%s\" %s--fpga=\"%s\" %s--fw=\"%s\"") % sudo % card_burner % ml % fpga_image_path % ml % fw_image_path); return str(boost::format("%s\n%s") % print_utility_error("uhd_images_downloader.py") % card_burner_cmd); } else{ const std::string addr = _ctrl_transport->get_recv_addr(); - const std::string net_burner_path = (fs::path(uhd::get_pkg_path()) / UHD_LIB_DIR / "uhd" / "utils" / "usrp_n2xx_simple_net_burner").string(); - const std::string net_burner_cmd = str(boost::format("\"%s\" %s--addr=\"%s\"") % net_burner_path % ml % addr); - return str(boost::format("%s\n%s") % print_utility_error("uhd_images_downloader.py") % net_burner_cmd); + const std::string image_loader_path = (fs::path(uhd::get_pkg_path()) / "bin" / "uhd_image_loader").string(); + const std::string image_loader_cmd = str(boost::format(" \"%s\" %s--args=\"type=usrp2,addr=%s\"") % image_loader_path % ml % addr); + return str(boost::format("%s\n%s") % print_utility_error("uhd_images_downloader.py") % image_loader_cmd); } } diff --git a/host/lib/usrp/usrp2/usrp2_impl.cpp b/host/lib/usrp/usrp2/usrp2_impl.cpp index 1acc1dad3..6073ec1c0 100644 --- a/host/lib/usrp/usrp2/usrp2_impl.cpp +++ b/host/lib/usrp/usrp2/usrp2_impl.cpp @@ -48,7 +48,7 @@ static const size_t DEFAULT_NUM_FRAMES = 32; /*********************************************************************** * Discovery over the udp transport **********************************************************************/ -static device_addrs_t usrp2_find(const device_addr_t &hint_){ +device_addrs_t usrp2_find(const device_addr_t &hint_){ //handle the multi-device discovery device_addrs_t hints = separate_device_addr(hint_); if (hints.size() > 1){ diff --git a/host/lib/usrp/usrp2/usrp2_impl.hpp b/host/lib/usrp/usrp2/usrp2_impl.hpp index 701403029..07cd98b4c 100644 --- a/host/lib/usrp/usrp2/usrp2_impl.hpp +++ b/host/lib/usrp/usrp2/usrp2_impl.hpp @@ -42,6 +42,7 @@ #include <uhd/transport/vrt_if_packet.hpp> #include <uhd/transport/udp_simple.hpp> #include <uhd/transport/udp_zero_copy.hpp> +#include <uhd/types/device_addr.hpp> #include <uhd/usrp/dboard_manager.hpp> #include <uhd/usrp/subdev_spec.hpp> #include <boost/weak_ptr.hpp> @@ -55,6 +56,8 @@ static const boost::uint32_t USRP2_TX_ASYNC_SID = 2; static const boost::uint32_t USRP2_RX_SID_BASE = 3; static const std::string USRP2_EEPROM_MAP_KEY = "N100"; +uhd::device_addrs_t usrp2_find(const uhd::device_addr_t &hint_); + //! Make a usrp2 dboard interface. uhd::usrp::dboard_iface::sptr make_usrp2_dboard_iface( uhd::timed_wb_iface::sptr wb_iface, diff --git a/host/lib/usrp/x300/CMakeLists.txt b/host/lib/usrp/x300/CMakeLists.txt index a588f901b..15af44721 100644 --- a/host/lib/usrp/x300/CMakeLists.txt +++ b/host/lib/usrp/x300/CMakeLists.txt @@ -1,5 +1,5 @@ # -# Copyright 2013 Ettus Research LLC +# Copyright 2013,2015 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -34,5 +34,7 @@ IF(ENABLE_X300) ${CMAKE_CURRENT_SOURCE_DIR}/x300_io_impl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/x300_dboard_iface.cpp ${CMAKE_CURRENT_SOURCE_DIR}/x300_clock_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/x300_image_loader.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/cdecode.c ) ENDIF(ENABLE_X300) diff --git a/host/lib/usrp/x300/cdecode.c b/host/lib/usrp/x300/cdecode.c new file mode 100644 index 000000000..1d09cbe22 --- /dev/null +++ b/host/lib/usrp/x300/cdecode.c @@ -0,0 +1,80 @@ +/* +cdecoder.c - c source to a base64 decoding algorithm implementation + +This is part of the libb64 project, and has been placed in the public domain. +For details, see http://sourceforge.net/projects/libb64 +*/ + +#include "cdecode.h" + +int base64_decode_value(char value_in){ + static const char decoding[] = {62,-1,-1,-1,63,52,53,54,55,56,57,58,59,60,61,-1,-1,-1,-2,-1,-1,-1,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,-1,-1,-1,-1,-1,-1,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51}; + static const char decoding_size = sizeof(decoding); + value_in -= 43; + if ((signed char)value_in < 0 || value_in > decoding_size) return -1; + return decoding[(int)value_in]; +} + +void base64_init_decodestate(base64_decodestate* state_in){ + state_in->step = step_a; + state_in->plainchar = 0; +} + +size_t base64_decode_block(const char* code_in, const size_t length_in, char* plaintext_out, base64_decodestate* state_in){ + const char* codechar = code_in; + char* plainchar = plaintext_out; + char fragment; + + *plainchar = state_in->plainchar; + + switch (state_in->step){ + while (1){ + case step_a: + do{ + if (codechar == code_in+length_in){ + state_in->step = step_a; + state_in->plainchar = *plainchar; + return plainchar - plaintext_out; + } + fragment = (char)base64_decode_value(*codechar++); + } while ((signed char)fragment < 0); + *plainchar = (fragment & 0x03f) << 2; + + case step_b: + do{ + if (codechar == code_in+length_in){ + state_in->step = step_b; + state_in->plainchar = *plainchar; + return plainchar - plaintext_out; + } + fragment = (char)base64_decode_value(*codechar++); + } while ((signed char)fragment < 0); + *plainchar++ |= (fragment & 0x030) >> 4; + *plainchar = (fragment & 0x00f) << 4; + case step_c: + do{ + if (codechar == code_in+length_in) + { + state_in->step = step_c; + state_in->plainchar = *plainchar; + return plainchar - plaintext_out; + } + fragment = (char)base64_decode_value(*codechar++); + } while ((signed char)fragment < 0); + *plainchar++ |= (fragment & 0x03c) >> 2; + *plainchar = (fragment & 0x003) << 6; + case step_d: + do{ + if (codechar == code_in+length_in){ + state_in->step = step_d; + state_in->plainchar = *plainchar; + return plainchar - plaintext_out; + } + fragment = (char)base64_decode_value(*codechar++); + } while ((signed char)fragment < 0); + *plainchar++ |= (fragment & 0x03f); + } + } + /* control should not reach here */ + return plainchar - plaintext_out; +} diff --git a/host/lib/usrp/x300/cdecode.h b/host/lib/usrp/x300/cdecode.h new file mode 100644 index 000000000..b8da55aa1 --- /dev/null +++ b/host/lib/usrp/x300/cdecode.h @@ -0,0 +1,36 @@ +/* +cdecode.h - c header for a base64 decoding algorithm + +This is part of the libb64 project, and has been placed in the public domain. +For details, see http://sourceforge.net/projects/libb64 +*/ + +#ifndef BASE64_CDECODE_H +#define BASE64_CDECODE_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include <stddef.h> + +typedef enum{ + step_a, step_b, step_c, step_d +} base64_decodestep; + +typedef struct{ + base64_decodestep step; + char plainchar; +} base64_decodestate; + +void base64_init_decodestate(base64_decodestate* state_in); + +int base64_decode_value(char value_in); + +size_t base64_decode_block(const char* code_in, const size_t length_in, char* plaintext_out, base64_decodestate* state_in); + +#ifdef __cplusplus +} +#endif + +#endif /* BASE64_CDECODE_H */ diff --git a/host/lib/usrp/x300/x300_adc_ctrl.cpp b/host/lib/usrp/x300/x300_adc_ctrl.cpp index b0e4e4b95..edb4ce885 100644 --- a/host/lib/usrp/x300/x300_adc_ctrl.cpp +++ b/host/lib/usrp/x300/x300_adc_ctrl.cpp @@ -55,8 +55,8 @@ public: _ads62p48_regs.lvds_cmos = ads62p48_regs_t::LVDS_CMOS_DDR_LVDS; _ads62p48_regs.channel_control = ads62p48_regs_t::CHANNEL_CONTROL_INDEPENDENT; _ads62p48_regs.data_format = ads62p48_regs_t::DATA_FORMAT_2S_COMPLIMENT; - _ads62p48_regs.clk_out_pos_edge = ads62p48_regs_t::CLK_OUT_POS_EDGE_MINUS7_26; - _ads62p48_regs.clk_out_neg_edge = ads62p48_regs_t::CLK_OUT_NEG_EDGE_MINUS7_26; + _ads62p48_regs.clk_out_pos_edge = ads62p48_regs_t::CLK_OUT_POS_EDGE_NORMAL; + _ads62p48_regs.clk_out_neg_edge = ads62p48_regs_t::CLK_OUT_NEG_EDGE_NORMAL; this->send_ads62p48_reg(0); diff --git a/host/lib/usrp/x300/x300_clock_ctrl.cpp b/host/lib/usrp/x300/x300_clock_ctrl.cpp index 6450686dd..0812bcc8e 100644 --- a/host/lib/usrp/x300/x300_clock_ctrl.cpp +++ b/host/lib/usrp/x300/x300_clock_ctrl.cpp @@ -21,6 +21,7 @@ #include <uhd/utils/math.hpp> #include <boost/cstdint.hpp> #include <boost/format.hpp> +#include <boost/math/special_functions/round.hpp> #include <stdexcept> #include <cmath> #include <cstdlib> @@ -29,6 +30,30 @@ static const double X300_REF_CLK_OUT_RATE = 10e6; static const boost::uint16_t X300_MAX_CLKOUT_DIV = 1045; static const double X300_DEFAULT_DBOARD_CLK_RATE = 50e6; +struct x300_clk_delays { + x300_clk_delays() : + fpga_dly_ns(0.0),adc_dly_ns(0.0),dac_dly_ns(0.0),db_rx_dly_ns(0.0),db_tx_dly_ns(0.0) + {} + x300_clk_delays(double fpga, double adc, double dac, double db_rx, double db_tx) : + fpga_dly_ns(fpga),adc_dly_ns(adc),dac_dly_ns(dac),db_rx_dly_ns(db_rx),db_tx_dly_ns(db_tx) + {} + + double fpga_dly_ns; + double adc_dly_ns; + double dac_dly_ns; + double db_rx_dly_ns; + double db_tx_dly_ns; +}; + +// Tune the FPGA->ADC clock delay to ensure a safe ADC_SSCLK -> RADIO_CLK crossing. +// If the FPGA_CLK is delayed, we also need to delay the reference clocks going to the DAC +// because the data interface clock is generated from FPGA_CLK. +static const x300_clk_delays X300_REV0_6_CLK_DELAYS = x300_clk_delays( + /*fpga=*/0.000, /*adc=*/1.600, /*dac=*/0.000, /*db_rx=*/0.000, /*db_tx=*/0.000); + +static const x300_clk_delays X300_REV7_CLK_DELAYS = x300_clk_delays( + /*fpga=*/0.000, /*adc=*/4.400, /*dac=*/0.000, /*db_rx=*/0.000, /*db_tx=*/0.000); + using namespace uhd; x300_clock_ctrl::~x300_clock_ctrl(void){ @@ -213,6 +238,187 @@ public: _spiface->write_spi(_slaveno, spi_config_t::EDGE_RISE, data,32); } + double set_clock_delay(const x300_clock_which_t which, const double delay_ns, const bool resync = true) { + //All dividers have are delayed by 5 taps by default. The delay + //set by this function is relative to the 5 tap delay + static const boost::uint16_t DDLY_MIN_TAPS = 5; + static const boost::uint16_t DDLY_MAX_TAPS = 522; //Extended mode + + //The resolution and range of the analog delay is fixed + static const double ADLY_RES_NS = 0.025; + static const double ADLY_MIN_NS = 0.500; + static const double ADLY_MAX_NS = 0.975; + + //Each digital tap delays the clock by one VCO period + double vco_period_ns = 1.0e9/_vco_freq; + double half_vco_period_ns = vco_period_ns/2.0; + + //Implement as much of the requested delay using digital taps. Whatever is leftover + //will be made up using the analog delay element and the half-cycle digital tap. + //A caveat here is that the analog delay starts at ADLY_MIN_NS, so we need to back off + //by that much when coming up with the digital taps so that the difference can be made + //up using the analog delay. + boost::uint16_t ddly_taps = 0; + if (delay_ns < ADLY_MIN_NS) { + ddly_taps = static_cast<boost::uint16_t>(std::floor((delay_ns)/vco_period_ns)); + } else { + ddly_taps = static_cast<boost::uint16_t>(std::floor((delay_ns-ADLY_MIN_NS)/vco_period_ns)); + } + double leftover_delay = delay_ns - (vco_period_ns * ddly_taps); + + //Compute settings + boost::uint16_t ddly_value = ddly_taps + DDLY_MIN_TAPS; + bool adly_en = false; + boost::uint8_t adly_value = 0; + boost::uint8_t half_shift_en = 0; + + if (ddly_value > DDLY_MAX_TAPS) { + throw uhd::value_error("set_clock_delay: Requested delay is out of range."); + } + + double coerced_delay = (vco_period_ns * ddly_taps); + if (leftover_delay > ADLY_MAX_NS) { + //The VCO is running too slowly for us to compensate the digital delay difference using + //analog delay. Do the best we can. + adly_en = true; + adly_value = static_cast<boost::uint8_t>(boost::math::round((ADLY_MAX_NS-ADLY_MIN_NS)/ADLY_RES_NS)); + coerced_delay += ADLY_MAX_NS; + } else if (leftover_delay >= ADLY_MIN_NS && leftover_delay <= ADLY_MAX_NS) { + //The leftover delay can be compensated by the analog delay up to the analog delay resolution + adly_en = true; + adly_value = static_cast<boost::uint8_t>(boost::math::round((leftover_delay-ADLY_MIN_NS)/ADLY_RES_NS)); + coerced_delay += ADLY_MIN_NS+(ADLY_RES_NS*adly_value); + } else if (leftover_delay >= (ADLY_MIN_NS - half_vco_period_ns) && leftover_delay < ADLY_MIN_NS) { + //The leftover delay if less than the minimum supported analog delay but if we move the digital + //delay back by half a VCO cycle then it will be in the range of the analog delay. So do that! + adly_en = true; + adly_value = static_cast<boost::uint8_t>(boost::math::round((leftover_delay+half_vco_period_ns-ADLY_MIN_NS)/ADLY_RES_NS)); + half_shift_en = 1; + coerced_delay += ADLY_MIN_NS+(ADLY_RES_NS*adly_value)-half_vco_period_ns; + } else { + //Even after moving the digital delay back by half a cycle, we cannot make up the difference + //so give up on compensating for the difference from the digital delay tap. + //If control reaches here then the value of leftover_delay is possible very small and will still + //be close to what the client requested. + } + + UHD_LOGV(often) + << boost::format("x300_clock_ctrl::set_clock_delay: Which=%d, Requested=%f, Digital Taps=%d, Half Shift=%d, Analog Delay=%d (%s), Coerced Delay=%fns" + ) % which % delay_ns % ddly_value % (half_shift_en?"ON":"OFF") % ((int)adly_value) % (adly_en?"ON":"OFF") % coerced_delay << std::endl; + + //Apply settings + switch (which) + { + case X300_CLOCK_WHICH_FPGA: + _lmk04816_regs.CLKout0_1_DDLY = ddly_value; + _lmk04816_regs.CLKout0_1_HS = half_shift_en; + if (adly_en) { + _lmk04816_regs.CLKout0_ADLY_SEL = lmk04816_regs_t::CLKOUT0_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout1_ADLY_SEL = lmk04816_regs_t::CLKOUT1_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout0_1_ADLY = adly_value; + } else { + _lmk04816_regs.CLKout0_ADLY_SEL = lmk04816_regs_t::CLKOUT0_ADLY_SEL_D_PD; + _lmk04816_regs.CLKout1_ADLY_SEL = lmk04816_regs_t::CLKOUT1_ADLY_SEL_D_PD; + } + write_regs(0); + write_regs(6); + _delays.fpga_dly_ns = coerced_delay; + break; + case X300_CLOCK_WHICH_DB0_RX: + case X300_CLOCK_WHICH_DB1_RX: + _lmk04816_regs.CLKout2_3_DDLY = ddly_value; + _lmk04816_regs.CLKout2_3_HS = half_shift_en; + if (adly_en) { + _lmk04816_regs.CLKout2_ADLY_SEL = lmk04816_regs_t::CLKOUT2_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout3_ADLY_SEL = lmk04816_regs_t::CLKOUT3_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout2_3_ADLY = adly_value; + } else { + _lmk04816_regs.CLKout2_ADLY_SEL = lmk04816_regs_t::CLKOUT2_ADLY_SEL_D_PD; + _lmk04816_regs.CLKout3_ADLY_SEL = lmk04816_regs_t::CLKOUT3_ADLY_SEL_D_PD; + } + write_regs(1); + write_regs(6); + _delays.db_rx_dly_ns = coerced_delay; + break; + case X300_CLOCK_WHICH_DB0_TX: + case X300_CLOCK_WHICH_DB1_TX: + _lmk04816_regs.CLKout4_5_DDLY = ddly_value; + _lmk04816_regs.CLKout4_5_HS = half_shift_en; + if (adly_en) { + _lmk04816_regs.CLKout4_ADLY_SEL = lmk04816_regs_t::CLKOUT4_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout5_ADLY_SEL = lmk04816_regs_t::CLKOUT5_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout4_5_ADLY = adly_value; + } else { + _lmk04816_regs.CLKout4_ADLY_SEL = lmk04816_regs_t::CLKOUT4_ADLY_SEL_D_PD; + _lmk04816_regs.CLKout5_ADLY_SEL = lmk04816_regs_t::CLKOUT5_ADLY_SEL_D_PD; + } + write_regs(2); + write_regs(7); + _delays.db_tx_dly_ns = coerced_delay; + break; + case X300_CLOCK_WHICH_DAC0: + case X300_CLOCK_WHICH_DAC1: + _lmk04816_regs.CLKout6_7_DDLY = ddly_value; + _lmk04816_regs.CLKout6_7_HS = half_shift_en; + if (adly_en) { + _lmk04816_regs.CLKout6_ADLY_SEL = lmk04816_regs_t::CLKOUT6_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout7_ADLY_SEL = lmk04816_regs_t::CLKOUT7_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout6_7_ADLY = adly_value; + } else { + _lmk04816_regs.CLKout6_ADLY_SEL = lmk04816_regs_t::CLKOUT6_ADLY_SEL_D_PD; + _lmk04816_regs.CLKout7_ADLY_SEL = lmk04816_regs_t::CLKOUT7_ADLY_SEL_D_PD; + } + write_regs(3); + write_regs(7); + _delays.dac_dly_ns = coerced_delay; + break; + case X300_CLOCK_WHICH_ADC0: + case X300_CLOCK_WHICH_ADC1: + _lmk04816_regs.CLKout8_9_DDLY = ddly_value; + _lmk04816_regs.CLKout8_9_HS = half_shift_en; + if (adly_en) { + _lmk04816_regs.CLKout8_ADLY_SEL = lmk04816_regs_t::CLKOUT8_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout9_ADLY_SEL = lmk04816_regs_t::CLKOUT9_ADLY_SEL_D_BOTH; + _lmk04816_regs.CLKout8_9_ADLY = adly_value; + } else { + _lmk04816_regs.CLKout8_ADLY_SEL = lmk04816_regs_t::CLKOUT8_ADLY_SEL_D_PD; + _lmk04816_regs.CLKout9_ADLY_SEL = lmk04816_regs_t::CLKOUT9_ADLY_SEL_D_PD; + } + write_regs(4); + write_regs(8); + _delays.adc_dly_ns = coerced_delay; + break; + default: + throw uhd::value_error("set_clock_delay: Requested source is invalid."); + } + + //Delays are applied only on a sync event + if (resync) sync_clocks(); + + return coerced_delay; + } + + double get_clock_delay(const x300_clock_which_t which) { + switch (which) + { + case X300_CLOCK_WHICH_FPGA: + return _delays.fpga_dly_ns; + case X300_CLOCK_WHICH_DB0_RX: + case X300_CLOCK_WHICH_DB1_RX: + return _delays.db_rx_dly_ns; + case X300_CLOCK_WHICH_DB0_TX: + case X300_CLOCK_WHICH_DB1_TX: + return _delays.db_tx_dly_ns; + case X300_CLOCK_WHICH_DAC0: + case X300_CLOCK_WHICH_DAC1: + return _delays.dac_dly_ns; + case X300_CLOCK_WHICH_ADC0: + case X300_CLOCK_WHICH_ADC1: + return _delays.adc_dly_ns; + default: + throw uhd::value_error("get_clock_delay: Requested source is invalid."); + } + } private: @@ -409,7 +615,6 @@ private: _lmk04816_regs.CLKout0_1_PD = lmk04816_regs_t::CLKOUT0_1_PD_POWER_UP; this->write_regs(0); _lmk04816_regs.CLKout0_1_DIV = master_clock_div; - _lmk04816_regs.CLKout0_ADLY_SEL = lmk04816_regs_t::CLKOUT0_ADLY_SEL_D_EV_X; this->write_regs(0); // Register 1 @@ -433,9 +638,6 @@ private: _lmk04816_regs.CLKout1_TYPE = lmk04816_regs_t::CLKOUT1_TYPE_P_DOWN; //CPRI feedback clock, use LVDS _lmk04816_regs.CLKout2_TYPE = lmk04816_regs_t::CLKOUT2_TYPE_LVPECL_700MVPP; //DB_0_RX _lmk04816_regs.CLKout3_TYPE = lmk04816_regs_t::CLKOUT3_TYPE_LVPECL_700MVPP; //DB_1_RX - // Analog delay of 900ps to synchronize the radio clock with the source synchronous ADC clocks. - // This delay may need to vary due to temperature. Tested and verified at room temperature only. - _lmk04816_regs.CLKout0_1_ADLY = 0x10; // Register 7 _lmk04816_regs.CLKout4_TYPE = lmk04816_regs_t::CLKOUT4_TYPE_LVPECL_700MVPP; //DB_1_TX @@ -501,6 +703,19 @@ private: // PLL2_P_30 set in individual cases above // PLL2_N_30 set in individual cases above + if (_hw_rev >= 7) { + _delays = X300_REV7_CLK_DELAYS; + } else { + _delays = X300_REV0_6_CLK_DELAYS; + } + + //Apply delay values + set_clock_delay(X300_CLOCK_WHICH_FPGA, _delays.fpga_dly_ns, false); + set_clock_delay(X300_CLOCK_WHICH_DB0_RX, _delays.db_rx_dly_ns, false); //Sets both Ch0 and Ch1 + set_clock_delay(X300_CLOCK_WHICH_DB0_TX, _delays.db_tx_dly_ns, false); //Sets both Ch0 and Ch1 + set_clock_delay(X300_CLOCK_WHICH_ADC0, _delays.adc_dly_ns, false); //Sets both Ch0 and Ch1 + set_clock_delay(X300_CLOCK_WHICH_DAC0, _delays.dac_dly_ns, false); //Sets both Ch0 and Ch1 + /* Write the configuration values into the LMK */ for (size_t i = 1; i <= 16; ++i) { this->write_regs(i); @@ -512,13 +727,14 @@ private: this->sync_clocks(); } - const spi_iface::sptr _spiface; - const size_t _slaveno; - const size_t _hw_rev; - const double _master_clock_rate; - const double _system_ref_rate; - lmk04816_regs_t _lmk04816_regs; - double _vco_freq; + const spi_iface::sptr _spiface; + const size_t _slaveno; + const size_t _hw_rev; + const double _master_clock_rate; + const double _system_ref_rate; + lmk04816_regs_t _lmk04816_regs; + double _vco_freq; + x300_clk_delays _delays; }; x300_clock_ctrl::sptr x300_clock_ctrl::make(uhd::spi_iface::sptr spiface, diff --git a/host/lib/usrp/x300/x300_clock_ctrl.hpp b/host/lib/usrp/x300/x300_clock_ctrl.hpp index 9c08aa356..160a14e6d 100644 --- a/host/lib/usrp/x300/x300_clock_ctrl.hpp +++ b/host/lib/usrp/x300/x300_clock_ctrl.hpp @@ -33,7 +33,7 @@ enum x300_clock_which_t X300_CLOCK_WHICH_DB0_TX, X300_CLOCK_WHICH_DB1_RX, X300_CLOCK_WHICH_DB1_TX, - X300_CLOCK_WHICH_TEST, + X300_CLOCK_WHICH_FPGA, }; class x300_clock_ctrl : boost::noncopyable @@ -94,6 +94,22 @@ public: */ virtual void set_ref_out(const bool) = 0; + /*! Set the clock delay for the given clock divider. + * \param which which clock + * \param rate the delay in nanoseconds + * \param resync resync clocks to apply delays + * \return the actual delay value set + * \throw exception when which invalid or delay_ns out of range + */ + virtual double set_clock_delay(const x300_clock_which_t which, const double delay_ns, const bool resync = true) = 0; + + /*! Get the clock delay for the given clock divider. + * \param which which clock + * \return the actual delay value set + * \throw exception when which invalid + */ + virtual double get_clock_delay(const x300_clock_which_t which) = 0; + /*! Reset the clocks. * Should be called if the reference clock changes * to reduce the time required to achieve a lock. diff --git a/host/lib/usrp/x300/x300_dac_ctrl.cpp b/host/lib/usrp/x300/x300_dac_ctrl.cpp index d3bcb8644..bb41146b6 100644 --- a/host/lib/usrp/x300/x300_dac_ctrl.cpp +++ b/host/lib/usrp/x300/x300_dac_ctrl.cpp @@ -129,12 +129,16 @@ public: _check_pll(); // Configure digital interface settings - write_ad9146_reg(0x16, 0x02); // Skew DCI signal by 615ps to find stable data eye - write_ad9146_reg(0x03, 0x00); // 2's comp, I first, byte wide interface - //fpga wants I,Q in the sample word: - //first transaction goes into low bits - //second transaction goes into high bits - //therefore, we want Q to go first (bit 6 == 1) + // Bypass DCI delay. We center the clock edge in the data + // valid window in the FPGA by phase shifting the DCI going + // to the DAC. + write_ad9146_reg(0x16, 0x04); + // 2's comp, I first, byte wide interface + write_ad9146_reg(0x03, 0x00); + // FPGA wants I,Q in the sample word: + // - First transaction goes into low bits + // - Second transaction goes into high bits + // therefore, we want Q to go first (bit 6 == 1) write_ad9146_reg(0x03, (1 << 6)); //2s comp, i first, byte mode // Configure interpolation filters diff --git a/host/lib/usrp/x300/x300_fw_common.h b/host/lib/usrp/x300/x300_fw_common.h index 76531f921..f7364c774 100644 --- a/host/lib/usrp/x300/x300_fw_common.h +++ b/host/lib/usrp/x300/x300_fw_common.h @@ -29,10 +29,10 @@ extern "C" { #endif -#define X300_MAX_HW_REV 6 -#define X300_FW_COMPAT_MAJOR 3 +#define X300_MAX_HW_REV 8 +#define X300_FW_COMPAT_MAJOR 4 #define X300_FW_COMPAT_MINOR 0 -#define X300_FPGA_COMPAT_MAJOR 9 +#define X300_FPGA_COMPAT_MAJOR 11 //shared memory sections - in between the stack and the program space #define X300_FW_SHMEM_BASE 0x6000 diff --git a/host/lib/usrp/x300/x300_image_loader.cpp b/host/lib/usrp/x300/x300_image_loader.cpp new file mode 100644 index 000000000..9d92e7932 --- /dev/null +++ b/host/lib/usrp/x300/x300_image_loader.cpp @@ -0,0 +1,402 @@ +// +// Copyright 2015 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <fstream> +#include <vector> + +#include <boost/algorithm/string.hpp> +#include <boost/filesystem.hpp> +#include <boost/property_tree/ptree.hpp> +#include <boost/property_tree/xml_parser.hpp> + +#include <uhd/config.hpp> +#include <uhd/device.hpp> +#include <uhd/image_loader.hpp> +#include <uhd/exception.hpp> +#include <uhd/transport/udp_simple.hpp> +#include <uhd/transport/nirio/niusrprio_session.h> +#include <uhd/transport/nirio/status.h> +#include <uhd/utils/byteswap.hpp> +#include <uhd/utils/paths.hpp> +#include <uhd/utils/static.hpp> + +#include "x300_impl.hpp" +#include "x300_fw_common.h" +#include "cdecode.h" + +namespace fs = boost::filesystem; + +using namespace boost::algorithm; +using namespace uhd; +using namespace uhd::transport; + +/* + * Constants + */ +#define X300_FPGA_BIN_SIZE_BYTES 15877916 +#define X300_FPGA_BIT_SIZE_BYTES 15878022 +#define X300_FPGA_PROG_UDP_PORT 49157 +#define X300_FLASH_SECTOR_SIZE 131072 +#define X300_PACKET_SIZE_BYTES 256 +#define X300_FPGA_SECTOR_START 32 +#define X300_MAX_RESPONSE_BYTES 128 +#define UDP_TIMEOUT 3 +#define FPGA_LOAD_TIMEOUT 15 + +/* + * Packet structure + */ +typedef struct { + boost::uint32_t flags; + boost::uint32_t sector; + boost::uint32_t index; + boost::uint32_t size; + union { + boost::uint8_t data8[X300_PACKET_SIZE_BYTES]; + boost::uint16_t data16[X300_PACKET_SIZE_BYTES/2]; + }; +} x300_fpga_update_data_t; + +/* + * X-Series burn session + */ +typedef struct { + bool found; + bool ethernet; + bool configure; // Reload FPGA after burning to flash (Ethernet only) + bool verify; // Device will verify the download along the way (Ethernet only) + bool lvbitx; + uhd::device_addr_t dev_addr; + std::string ip_addr; + std::string fpga_type; + std::string resource; + std::string filepath; + std::string rpc_port; + boost::uint32_t size; + udp_simple::sptr xport; + std::vector<char> bitstream; // .bin image extracted from .lvbitx file + boost::uint8_t data_in[udp_simple::mtu]; +} x300_session_t; + +/* + * Extract the .bin image from the given LVBITX file. + */ +static void extract_from_lvbitx(x300_session_t &session){ + boost::property_tree::ptree pt; + boost::property_tree::xml_parser::read_xml(session.filepath.c_str(), pt, + boost::property_tree::xml_parser::no_comments | + boost::property_tree::xml_parser::trim_whitespace); + const std::string encoded_bitstream(pt.get<std::string>("Bitfile.Bitstream")); + std::vector<char> decoded_bitstream(encoded_bitstream.size()); + + base64_decodestate decode_state; + base64_init_decodestate(&decode_state); + const size_t decoded_size = base64_decode_block(encoded_bitstream.c_str(), + encoded_bitstream.size(), &decoded_bitstream.front(), &decode_state); + decoded_bitstream.resize(decoded_size); + session.bitstream.swap(decoded_bitstream); + + session.size = session.bitstream.size(); +} + +/* + * Validate X300 image and extract if LVBITX. + */ +static void x300_validate_image(x300_session_t &session){ + if(not fs::exists(session.filepath)){ + throw uhd::runtime_error(str(boost::format("Could not find image at path \"%s\".") + % session.filepath)); + } + + std::string extension = fs::extension(session.filepath); + session.lvbitx = (extension == ".lvbitx"); + + if(session.lvbitx){ + extract_from_lvbitx(session); + if(session.size > X300_FPGA_BIN_SIZE_BYTES){ + throw uhd::runtime_error(str(boost::format("The specified FPGA image is too large: %d vs. %d") + % session.size % X300_FPGA_BIN_SIZE_BYTES)); + } + + /* + * PCIe burning just takes a filepath, even for a .lvbitx file, + * so just extract it to validate the size. + */ + if(!session.ethernet) session.bitstream.clear(); + } + else if(extension == ".bin" or extension == ".bit"){ + boost::uint32_t max_size = (extension == ".bin") ? X300_FPGA_BIN_SIZE_BYTES + : X300_FPGA_BIT_SIZE_BYTES; + + session.size = fs::file_size(session.filepath); + if(session.size > max_size){ + throw uhd::runtime_error(str(boost::format("The specified FPGA image is too large: %d vs. %d") + % session.size % max_size)); + return; + } + } + else{ + throw uhd::runtime_error(str(boost::format("Invalid extension \"%s\". Extension must be .bin, .bit, or .lvbitx.") + % extension)); + } +} + +static void x300_setup_session(x300_session_t &session, + const device_addr_t &args, + const std::string &filepath){ + device_addr_t find_args; + find_args["type"] = "x300"; + if(args.has_key("name")) find_args["name"] = args["name"]; + if(args.has_key("serial")) find_args["serial"] = args["serial"]; + if(args.has_key("ip-addr")) find_args["addr"] = args["ip-addr"]; + else if(args.has_key("resource")) find_args["resource"] = args["resource"]; + + device_addrs_t devs = x300_find(args); + session.found = (devs.size() > 0); + if(!session.found) return; + + session.dev_addr = devs[0]; + session.ethernet = session.dev_addr.has_key("addr"); + if(session.ethernet){ + session.ip_addr = session.dev_addr["addr"]; + session.configure = args.has_key("configure"); + session.xport = udp_simple::make_connected(session.ip_addr, + BOOST_STRINGIZE(X300_FPGA_PROG_UDP_PORT)); + session.verify = args.has_key("verify"); + } + else{ + session.resource = session.dev_addr["resource"]; + session.rpc_port = args.get("rpc-port", "5444"); + } + + /* + * The user can specify an FPGA type (1G, HGS, XGS), rather than a filename. If the user + * does not specify one, this will default to the type currently on the device. If this + * cannot be determined, then the user is forced to specify a filename. + */ + session.fpga_type = args.get("fpga", session.dev_addr.get("fpga", "")); + if(filepath == ""){ + if(!session.dev_addr.has_key("product") or session.fpga_type == ""){ + throw uhd::runtime_error("Found a device but could not auto-generate an image filename."); + } + else session.filepath = find_image_path(str(boost::format("usrp_%s_fpga_%s.bit") + % (to_lower_copy(session.dev_addr["product"])) + % session.fpga_type)); + } + else session.filepath = filepath; + + // Validate image + x300_validate_image(session); +} + +/* + * Ethernet communication functions + */ +static UHD_INLINE size_t x300_send_and_recv(udp_simple::sptr xport, + boost::uint32_t pkt_code, + x300_fpga_update_data_t *pkt_out, + boost::uint8_t* data){ + pkt_out->flags = uhd::htonx<boost::uint32_t>(pkt_code); + xport->send(boost::asio::buffer(pkt_out, sizeof(*pkt_out))); + return xport->recv(boost::asio::buffer(data, udp_simple::mtu), UDP_TIMEOUT); +} + +static UHD_INLINE bool x300_recv_ok(const x300_fpga_update_data_t *pkt_in, + size_t len){ + return (len > 0 and + ((ntohl(pkt_in->flags) & X300_FPGA_PROG_FLAGS_ERROR) != X300_FPGA_PROG_FLAGS_ERROR)); +} + +// Image data needs to be bitswapped +static UHD_INLINE void x300_bitswap(boost::uint8_t *num){ + *num = ((*num & 0xF0) >> 4) | ((*num & 0x0F) << 4); + *num = ((*num & 0xCC) >> 2) | ((*num & 0x33) << 2); + *num = ((*num & 0xAA) >> 1) | ((*num & 0x55) << 1); +} + +static void x300_ethernet_load(x300_session_t &session){ + + // UDP receive buffer + x300_fpga_update_data_t pkt_out; + const x300_fpga_update_data_t *pkt_in = reinterpret_cast<const x300_fpga_update_data_t*>(session.data_in); + + // Initialize write session + boost::uint32_t flags = X300_FPGA_PROG_FLAGS_ACK | X300_FPGA_PROG_FLAGS_INIT; + size_t len = x300_send_and_recv(session.xport, flags, &pkt_out, session.data_in); + if(x300_recv_ok(pkt_in, len)){ + std::cout << "-- Initializing FPGA loading..." << std::flush; + } + else if(len == 0){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Timed out waiting for reply from device."); + } + else{ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Device reported an error during initialization."); + } + + std::cout << "successful." << std::endl; + if(session.verify){ + std::cout << "-- NOTE: Device is verifying the image it is receiving, increasing the loading time." << std::endl; + } + + size_t current_pos = 0; + size_t sectors = (session.size / X300_FLASH_SECTOR_SIZE); + std::ifstream image(session.filepath.c_str(), std::ios::binary); + + // Each sector + for(size_t i = 0; i < session.size; i += X300_FLASH_SECTOR_SIZE){ + + // Print progress percentage at beginning of each sector + std::cout << boost::format("\r-- Loading %s FPGA image: %d%% (%d/%d sectors)") + % session.fpga_type + % (int(double(i) / double(session.size) * 100.0)) + % (i / X300_FLASH_SECTOR_SIZE) + % sectors + << std::flush; + + // Each packet + for(size_t j = i; (j < session.size and j < (i+X300_FLASH_SECTOR_SIZE)); j += X300_PACKET_SIZE_BYTES){ + flags = X300_FPGA_PROG_FLAGS_ACK; + if(j == i) flags |= X300_FPGA_PROG_FLAGS_ERASE; // Erase at beginning of sector + if(session.verify) flags |= X300_FPGA_PROG_FLAGS_VERIFY; + + // Set burn location + pkt_out.sector = htonx<boost::uint32_t>(X300_FPGA_SECTOR_START + (i/X300_FLASH_SECTOR_SIZE)); + pkt_out.index = htonx<boost::uint32_t>((j % X300_FLASH_SECTOR_SIZE) / 2); + pkt_out.size = htonx<boost::uint32_t>(X300_PACKET_SIZE_BYTES / 2); + + // Read next piece of image + memset(pkt_out.data8, 0, X300_PACKET_SIZE_BYTES); + if(session.lvbitx){ + memcpy(pkt_out.data8, &session.bitstream[current_pos], X300_PACKET_SIZE_BYTES); + current_pos += X300_PACKET_SIZE_BYTES; + } + else{ + image.read((char*)pkt_out.data8, X300_PACKET_SIZE_BYTES); + } + + // Data must be bitswapped and byteswapped + for(size_t k = 0; k < X300_PACKET_SIZE_BYTES; k++){ + x300_bitswap(&pkt_out.data8[k]); + } + for(size_t k = 0; k < (X300_PACKET_SIZE_BYTES/2); k++){ + pkt_out.data16[k] = htonx<boost::uint16_t>(pkt_out.data16[k]); + } + + len = x300_send_and_recv(session.xport, flags, &pkt_out, session.data_in); + if(len == 0){ + if(!session.lvbitx) image.close(); + throw uhd::runtime_error("Timed out waiting for reply from device."); + } + else if((ntohl(pkt_in->flags) & X300_FPGA_PROG_FLAGS_ERROR)){ + if(!session.lvbitx) image.close(); + throw uhd::runtime_error("Device reported an error."); + } + } + } + if(!session.lvbitx){ + image.close(); + } + + std::cout << boost::format("\r-- Loading %s FPGA image: 100%% (%d/%d sectors)") + % session.fpga_type + % sectors + % sectors + << std::endl; + + // Cleanup + if(!session.lvbitx) image.close(); + flags = (X300_FPGA_PROG_FLAGS_CLEANUP | X300_FPGA_PROG_FLAGS_ACK); + pkt_out.sector = pkt_out.index = pkt_out.size = 0; + memset(pkt_out.data8, 0, X300_PACKET_SIZE_BYTES); + std::cout << "-- Finalizing image load..." << std::flush; + len = x300_send_and_recv(session.xport, flags, &pkt_out, session.data_in); + if(len == 0){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Timed out waiting for reply from device."); + } + else if((ntohl(pkt_in->flags) & X300_FPGA_PROG_FLAGS_ERROR)){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Device reported an error during cleanup."); + } + else std::cout << "successful." << std::endl; + + // Save new FPGA image (if option set) + if(session.configure){ + flags = (X300_FPGA_PROG_CONFIGURE | X300_FPGA_PROG_FLAGS_ACK); + x300_send_and_recv(session.xport, flags, &pkt_out, session.data_in); + std::cout << "-- Saving image onto device..." << std::flush; + if(len == 0){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Timed out waiting for reply from device."); + } + else if((ntohl(pkt_in->flags) & X300_FPGA_PROG_FLAGS_ERROR)){ + std::cout << "failed." << std::endl; + throw uhd::runtime_error("Device reported an error while saving the image."); + } + else std::cout << "successful." << std::endl; + } +} + +static void x300_pcie_load(x300_session_t &session){ + + std::cout << boost::format("\r-- Loading %s FPGA image (this will take 5-10 minutes)...") + % session.fpga_type + << std::flush; + + nirio_status status = NiRio_Status_Success; + niusrprio::niusrprio_session fpga_session(session.resource, session.rpc_port); + nirio_status_chain(fpga_session.download_bitstream_to_flash(session.filepath), status); + + if(nirio_status_fatal(status)){ + std::cout << "failed." << std::endl; + niusrprio::nirio_status_to_exception(status, "NI-RIO reported the following error:"); + } + else std::cout << "successful." << std::endl; +} + +static bool x300_image_loader(const image_loader::image_loader_args_t &image_loader_args){ + // See if any X3x0 with the given args is found + device_addrs_t devs = x300_find(image_loader_args.args); + if(devs.size() == 0 or !image_loader_args.load_fpga) return false; + + x300_session_t session; + x300_setup_session(session, + image_loader_args.args, + image_loader_args.fpga_path + ); + if(!session.found) return false; + + std::cout << boost::format("Unit: USRP %s (%s, %s)\nFPGA Image: %s\n") + % session.dev_addr["product"] + % session.dev_addr["serial"] + % session.dev_addr[session.ethernet ? "addr" : "resource"] + % session.filepath; + + if(session.ethernet) x300_ethernet_load(session); + else x300_pcie_load(session); + return true; +} + +UHD_STATIC_BLOCK(register_x300_image_loader){ + std::string recovery_instructions = "Aborting. Your USRP X-Series device will likely be unusable. Visit\n" + "http://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_load_fpga_imgs_jtag\n" + "for details on restoring your device."; + + image_loader::register_image_loader("x300", x300_image_loader, recovery_instructions); +} diff --git a/host/lib/usrp/x300/x300_impl.cpp b/host/lib/usrp/x300/x300_impl.cpp index aff150acb..8c565a252 100644 --- a/host/lib/usrp/x300/x300_impl.cpp +++ b/host/lib/usrp/x300/x300_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2013-2014 Ettus Research LLC +// Copyright 2013-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -16,7 +16,6 @@ // #include "x300_impl.hpp" -#include "x300_regs.hpp" #include "x300_lvbitx.hpp" #include "x310_lvbitx.hpp" #include <boost/algorithm/string.hpp> @@ -41,7 +40,7 @@ #define NIUSRPRIO_DEFAULT_RPC_PORT "5444" -#define X300_REV(x) (x - "A" + 1) +#define X300_REV(x) ((x) - "A" + 1) using namespace uhd; using namespace uhd::usrp; @@ -236,7 +235,7 @@ static device_addrs_t x300_find_pcie(const device_addr_t &hint, bool explicit_qu return addrs; } -static device_addrs_t x300_find(const device_addr_t &hint_) +device_addrs_t x300_find(const device_addr_t &hint_) { //handle the multi-device discovery device_addrs_t hints = separate_device_addr(hint_); @@ -508,9 +507,10 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) x300_load_fw(mb.zpu_ctrl, x300_fw_image); } - //check compat -- good place to do after conditional loading + //check compat numbers + //check fpga compat before fw compat because the fw is a subset of the fpga image + this->check_fpga_compat(mb_path, mb); this->check_fw_compat(mb_path, mb.zpu_ctrl); - this->check_fpga_compat(mb_path, mb.zpu_ctrl); //store which FPGA image is loaded mb.loaded_fpga_image = get_fpga_option(mb.zpu_ctrl); @@ -696,23 +696,29 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) //////////////////////////////////////////////////////////////////// // setup radios //////////////////////////////////////////////////////////////////// - UHD_MSG(status) << "Initialize Radio control..." << std::endl; - this->setup_radio(mb_i, "A"); - this->setup_radio(mb_i, "B"); + this->setup_radio(mb_i, "A", dev_addr); + this->setup_radio(mb_i, "B", dev_addr); + + //////////////////////////////////////////////////////////////////// + // ADC test and cal + //////////////////////////////////////////////////////////////////// + if (dev_addr.has_key("self_cal_adc_delay")) { + self_cal_adc_xfer_delay(mb, true /* Apply ADC delay */); + } + self_test_adcs(mb); //////////////////////////////////////////////////////////////////// // front panel gpio //////////////////////////////////////////////////////////////////// mb.fp_gpio = gpio_core_200::make(mb.radio_perifs[0].ctrl, TOREG(SR_FP_GPIO), RB32_FP_GPIO); - const std::vector<std::string> GPIO_ATTRS = boost::assign::list_of("CTRL")("DDR")("OUT")("ATR_0X")("ATR_RX")("ATR_TX")("ATR_XX"); - BOOST_FOREACH(const std::string &attr, GPIO_ATTRS) + BOOST_FOREACH(const gpio_attr_map_t::value_type attr, gpio_attr_map) { - _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / attr) + _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / attr.second) .set(0) - .subscribe(boost::bind(&x300_impl::set_fp_gpio, this, mb.fp_gpio, attr, _1)); + .subscribe(boost::bind(&x300_impl::set_fp_gpio, this, mb.fp_gpio, attr.first, _1)); } _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / "READBACK") - .publish(boost::bind(&x300_impl::get_fp_gpio, this, mb.fp_gpio, "READBACK")); + .publish(boost::bind(&x300_impl::get_fp_gpio, this, mb.fp_gpio)); //////////////////////////////////////////////////////////////////// // register the time keepers - only one can be the highlander @@ -829,8 +835,15 @@ x300_impl::~x300_impl(void) { BOOST_FOREACH(mboard_members_t &mb, _mb) { - mb.radio_perifs[0].ctrl->poke32(TOREG(SR_MISC_OUTS), (1 << 2)); //disable/reset ADC/DAC - mb.radio_perifs[1].ctrl->poke32(TOREG(SR_MISC_OUTS), (1 << 2)); //disable/reset ADC/DAC + //disable/reset ADC/DAC + mb.radio_perifs[0].misc_outs->set(radio_misc_outs_reg::ADC_RESET, 1); + mb.radio_perifs[0].misc_outs->set(radio_misc_outs_reg::DAC_RESET_N, 0); + mb.radio_perifs[0].misc_outs->set(radio_misc_outs_reg::DAC_ENABLED, 0); + mb.radio_perifs[0].misc_outs->flush(); + mb.radio_perifs[1].misc_outs->set(radio_misc_outs_reg::ADC_RESET, 1); + mb.radio_perifs[1].misc_outs->set(radio_misc_outs_reg::DAC_RESET_N, 0); + mb.radio_perifs[1].misc_outs->set(radio_misc_outs_reg::DAC_ENABLED, 0); + mb.radio_perifs[1].misc_outs->flush(); //kill the claimer task and unclaim the device mb.claimer_task.reset(); @@ -850,15 +863,7 @@ x300_impl::~x300_impl(void) } } -static void check_adc(wb_iface::sptr iface, const boost::uint32_t val) -{ - boost::uint32_t adc_rb = iface->peek32(RB32_RX); - adc_rb ^= 0xfffc0000; //adapt for I inversion in FPGA - //UHD_MSG(status) << "adc_rb " << std::hex << adc_rb << " val " << std::hex << val << std::endl; - UHD_ASSERT_THROW(adc_rb == val); -} - -void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name) +void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name, const uhd::device_addr_t &dev_addr) { const fs_path mb_path = "/mboards/"+boost::lexical_cast<std::string>(mb_i); UHD_ASSERT_THROW(mb_i < _mb.size()); @@ -866,6 +871,8 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name) const size_t radio_index = mb.get_radio_index(slot_name); radio_perifs_t &perif = mb.radio_perifs[radio_index]; + UHD_MSG(status) << boost::format("Initialize Radio%d control...") % radio_index << std::endl; + //////////////////////////////////////////////////////////////////// // radio control //////////////////////////////////////////////////////////////////// @@ -873,8 +880,20 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name) boost::uint32_t ctrl_sid; both_xports_t xport = this->make_transport(mb_i, dest, X300_RADIO_DEST_PREFIX_CTRL, device_addr_t(), ctrl_sid); perif.ctrl = radio_ctrl_core_3000::make(mb.if_pkt_is_big_endian, xport.recv, xport.send, ctrl_sid, slot_name); - perif.ctrl->poke32(TOREG(SR_MISC_OUTS), (1 << 2)); //reset adc + dac - perif.ctrl->poke32(TOREG(SR_MISC_OUTS), (1 << 1) | (1 << 0)); //out of reset + dac enable + + perif.misc_outs = boost::make_shared<radio_misc_outs_reg>(); + perif.misc_ins = boost::make_shared<radio_misc_ins_reg>(); + perif.misc_outs->initialize(*perif.ctrl, true); + perif.misc_ins->initialize(*perif.ctrl); + + //reset adc + dac + perif.misc_outs->set(radio_misc_outs_reg::ADC_RESET, 1); + perif.misc_outs->set(radio_misc_outs_reg::DAC_RESET_N, 0); + perif.misc_outs->flush(); + perif.misc_outs->set(radio_misc_outs_reg::ADC_RESET, 0); + perif.misc_outs->set(radio_misc_outs_reg::DAC_RESET_N, 1); + perif.misc_outs->set(radio_misc_outs_reg::DAC_ENABLED, 1); + perif.misc_outs->flush(); this->register_loopback_self_test(perif.ctrl); @@ -883,31 +902,16 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name) perif.dac = x300_dac_ctrl::make(perif.spi, DB_DAC_SEN, mb.clock->get_master_clock_rate()); perif.leds = gpio_core_200_32wo::make(perif.ctrl, TOREG(SR_LEDS)); + //Capture delays are calibrated every time. The status is only printed is the user + //asks to run the xfer self cal using "self_cal_adc_delay" + self_cal_adc_capture_delay(mb, radio_index, dev_addr.has_key("self_cal_adc_delay")); + _tree->access<time_spec_t>(mb_path / "time" / "cmd") .subscribe(boost::bind(&radio_ctrl_core_3000::set_time, perif.ctrl, _1)); _tree->access<double>(mb_path / "tick_rate") .subscribe(boost::bind(&radio_ctrl_core_3000::set_tick_rate, perif.ctrl, _1)); //////////////////////////////////////////////////////////////// - // ADC self test - //////////////////////////////////////////////////////////////// - perif.adc->set_test_word("ones", "ones"); check_adc(perif.ctrl, 0xfffcfffc); - perif.adc->set_test_word("zeros", "zeros"); check_adc(perif.ctrl, 0x00000000); - perif.adc->set_test_word("ones", "zeros"); check_adc(perif.ctrl, 0xfffc0000); - perif.adc->set_test_word("zeros", "ones"); check_adc(perif.ctrl, 0x0000fffc); - for (size_t k = 0; k < 14; k++) - { - perif.adc->set_test_word("zeros", "custom", 1 << k); - check_adc(perif.ctrl, 1 << (k+2)); - } - for (size_t k = 0; k < 14; k++) - { - perif.adc->set_test_word("custom", "zeros", 1 << k); - check_adc(perif.ctrl, 1 << (k+18)); - } - perif.adc->set_test_word("normal", "normal"); - - //////////////////////////////////////////////////////////////// // create codec control objects //////////////////////////////////////////////////////////////// _tree->create<int>(mb_path / "rx_codecs" / slot_name / "gains"); //phony property so this dir exists @@ -1442,8 +1446,8 @@ bool x300_impl::wait_for_ref_locked(wb_iface::sptr ctrl, double timeout) boost::this_thread::sleep(boost::posix_time::milliseconds(1)); } while (boost::get_system_time() < timeout_time); - //failed to lock on reference - return false; + //Check one last time + return get_ref_locked(ctrl).to_bool(); } sensor_value_t x300_impl::get_ref_locked(wb_iface::sptr ctrl) @@ -1544,20 +1548,24 @@ void x300_impl::set_mb_eeprom(i2c_iface::sptr i2c, const mboard_eeprom_t &mb_eep * front-panel GPIO **********************************************************************/ -boost::uint32_t x300_impl::get_fp_gpio(gpio_core_200::sptr gpio, const std::string &) +boost::uint32_t x300_impl::get_fp_gpio(gpio_core_200::sptr gpio) { return boost::uint32_t(gpio->read_gpio(dboard_iface::UNIT_RX)); } -void x300_impl::set_fp_gpio(gpio_core_200::sptr gpio, const std::string &attr, const boost::uint32_t value) +void x300_impl::set_fp_gpio(gpio_core_200::sptr gpio, const gpio_attr_t attr, const boost::uint32_t value) { - if (attr == "CTRL") return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value); - if (attr == "DDR") return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value); - if (attr == "OUT") return gpio->set_gpio_out(dboard_iface::UNIT_RX, value); - if (attr == "ATR_0X") return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value); - if (attr == "ATR_RX") return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value); - if (attr == "ATR_TX") return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value); - if (attr == "ATR_XX") return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value); + switch (attr) + { + case GPIO_CTRL: return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value); + case GPIO_DDR: return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value); + case GPIO_OUT: return gpio->set_gpio_out(dboard_iface::UNIT_RX, value); + case GPIO_ATR_0X: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value); + case GPIO_ATR_RX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value); + case GPIO_ATR_TX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value); + case GPIO_ATR_XX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value); + default: UHD_THROW_INVALID_CODE_PATH(); + } } /*********************************************************************** @@ -1688,25 +1696,33 @@ void x300_impl::check_fw_compat(const fs_path &mb_path, wb_iface::sptr iface) % compat_major % compat_minor)); } -void x300_impl::check_fpga_compat(const fs_path &mb_path, wb_iface::sptr iface) +void x300_impl::check_fpga_compat(const fs_path &mb_path, const mboard_members_t &members) { - boost::uint32_t compat_num = iface->peek32(SR_ADDR(SET0_BASE, ZPU_RB_COMPAT_NUM)); + boost::uint32_t compat_num = members.zpu_ctrl->peek32(SR_ADDR(SET0_BASE, ZPU_RB_COMPAT_NUM)); boost::uint32_t compat_major = (compat_num >> 16); boost::uint32_t compat_minor = (compat_num & 0xffff); if (compat_major != X300_FPGA_COMPAT_MAJOR) { + std::string image_loader_path = (fs::path(uhd::get_pkg_path()) / "bin" / "uhd_image_loader").string(); + std::string image_loader_cmd = str(boost::format("\"%s\" --args=\"type=x300,%s=%s\"") + % image_loader_path + % (members.xport_path == "eth" ? "addr" + : "resource") + % members.addr); + throw uhd::runtime_error(str(boost::format( "Expected FPGA compatibility number %d, but got %d:\n" "The FPGA image on your device is not compatible with this host code build.\n" "Download the appropriate FPGA images for this version of UHD.\n" "%s\n\n" "Then burn a new image to the on-board flash storage of your\n" - "USRP X3xx device using the burner utility. %s\n\n" + "USRP X3xx device using the image loader utility. Use this command:\n\n%s\n\n" "For more information, refer to the UHD manual:\n\n" " http://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_flash" ) % int(X300_FPGA_COMPAT_MAJOR) % compat_major - % print_utility_error("uhd_images_downloader.py") % print_utility_error("usrp_x3xx_fpga_burner"))); + % print_utility_error("uhd_images_downloader.py") + % image_loader_cmd)); } _tree->create<std::string>(mb_path / "fpga_version").set(str(boost::format("%u.%u") % compat_major % compat_minor)); @@ -1730,14 +1746,20 @@ x300_impl::x300_mboard_t x300_impl::get_mb_type_from_pcie(const std::string& res case X300_USRP_PCIE_SSID: mb_type = USRP_X300_MB; break; case X310_USRP_PCIE_SSID: - case X310_2940R_PCIE_SSID: - case X310_2942R_PCIE_SSID: - case X310_2943R_PCIE_SSID: - case X310_2944R_PCIE_SSID: - case X310_2950R_PCIE_SSID: - case X310_2952R_PCIE_SSID: - case X310_2953R_PCIE_SSID: - case X310_2954R_PCIE_SSID: + case X310_2940R_40MHz_PCIE_SSID: + case X310_2940R_120MHz_PCIE_SSID: + case X310_2942R_40MHz_PCIE_SSID: + case X310_2942R_120MHz_PCIE_SSID: + case X310_2943R_40MHz_PCIE_SSID: + case X310_2943R_120MHz_PCIE_SSID: + case X310_2944R_40MHz_PCIE_SSID: + case X310_2950R_40MHz_PCIE_SSID: + case X310_2950R_120MHz_PCIE_SSID: + case X310_2952R_40MHz_PCIE_SSID: + case X310_2952R_120MHz_PCIE_SSID: + case X310_2953R_40MHz_PCIE_SSID: + case X310_2953R_120MHz_PCIE_SSID: + case X310_2954R_40MHz_PCIE_SSID: mb_type = USRP_X310_MB; break; default: mb_type = UNKNOWN; break; @@ -1765,14 +1787,20 @@ x300_impl::x300_mboard_t x300_impl::get_mb_type_from_eeprom(const uhd::usrp::mbo case X300_USRP_PCIE_SSID: mb_type = USRP_X300_MB; break; case X310_USRP_PCIE_SSID: - case X310_2940R_PCIE_SSID: - case X310_2942R_PCIE_SSID: - case X310_2943R_PCIE_SSID: - case X310_2944R_PCIE_SSID: - case X310_2950R_PCIE_SSID: - case X310_2952R_PCIE_SSID: - case X310_2953R_PCIE_SSID: - case X310_2954R_PCIE_SSID: + case X310_2940R_40MHz_PCIE_SSID: + case X310_2940R_120MHz_PCIE_SSID: + case X310_2942R_40MHz_PCIE_SSID: + case X310_2942R_120MHz_PCIE_SSID: + case X310_2943R_40MHz_PCIE_SSID: + case X310_2943R_120MHz_PCIE_SSID: + case X310_2944R_40MHz_PCIE_SSID: + case X310_2950R_40MHz_PCIE_SSID: + case X310_2950R_120MHz_PCIE_SSID: + case X310_2952R_40MHz_PCIE_SSID: + case X310_2952R_120MHz_PCIE_SSID: + case X310_2953R_40MHz_PCIE_SSID: + case X310_2953R_120MHz_PCIE_SSID: + case X310_2954R_40MHz_PCIE_SSID: mb_type = USRP_X310_MB; break; default: UHD_MSG(warning) << "X300 unknown product code in EEPROM: " << product_num << std::endl; @@ -1782,3 +1810,288 @@ x300_impl::x300_mboard_t x300_impl::get_mb_type_from_eeprom(const uhd::usrp::mbo return mb_type; } +void x300_impl::self_cal_adc_capture_delay(mboard_members_t& mb, const size_t radio_i, bool print_status) +{ + radio_perifs_t& perif = mb.radio_perifs[radio_i]; + if (print_status) UHD_MSG(status) << "Running ADC capture delay self-cal..." << std::flush; + + static const boost::uint32_t NUM_DELAY_STEPS = 32; //The IDELAYE2 element has 32 steps + static const boost::uint32_t NUM_RETRIES = 2; //Retry self-cal if it fails in warmup situations + static const boost::int32_t MIN_WINDOW_LEN = 4; + + boost::int32_t win_start = -1, win_stop = -1; + boost::uint32_t iter = 0; + while (iter++ < NUM_RETRIES) { + for (boost::uint32_t dly_tap = 0; dly_tap < NUM_DELAY_STEPS; dly_tap++) { + //Apply delay + perif.misc_outs->write(radio_misc_outs_reg::ADC_DATA_DLY_VAL, dly_tap); + perif.misc_outs->write(radio_misc_outs_reg::ADC_DATA_DLY_STB, 1); + perif.misc_outs->write(radio_misc_outs_reg::ADC_DATA_DLY_STB, 0); + + boost::uint32_t err_code = 0; + + // -- Test I Channel -- + //Put ADC in ramp test mode. Tie the other channel to all ones. + perif.adc->set_test_word("ramp", "ones"); + //Turn on the pattern checker in the FPGA. It will lock when it sees a zero + //and count deviations from the expected value + perif.misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 0); + perif.misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 1); + //10ms @ 200MHz = 2 million samples + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); + if (perif.misc_ins->read(radio_misc_ins_reg::ADC_CHECKER0_I_LOCKED)) { + err_code += perif.misc_ins->get(radio_misc_ins_reg::ADC_CHECKER0_I_ERROR); + } else { + err_code += 100; //Increment error code by 100 to indicate no lock + } + + // -- Test Q Channel -- + //Put ADC in ramp test mode. Tie the other channel to all ones. + perif.adc->set_test_word("ones", "ramp"); + //Turn on the pattern checker in the FPGA. It will lock when it sees a zero + //and count deviations from the expected value + perif.misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 0); + perif.misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 1); + //10ms @ 200MHz = 2 million samples + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); + if (perif.misc_ins->read(radio_misc_ins_reg::ADC_CHECKER0_Q_LOCKED)) { + err_code += perif.misc_ins->get(radio_misc_ins_reg::ADC_CHECKER0_Q_ERROR); + } else { + err_code += 100; //Increment error code by 100 to indicate no lock + } + + if (err_code == 0) { + if (win_start == -1) { //This is the first window + win_start = dly_tap; + win_stop = dly_tap; + } else { //We are extending the window + win_stop = dly_tap; + } + } else { + if (win_start != -1) { //A valid window turned invalid + if (win_stop - win_start >= MIN_WINDOW_LEN) { + break; //Valid window found + } else { + win_start = -1; //Reset window + } + } + } + //UHD_MSG(status) << (boost::format("CapTap=%d, Error=%d\n") % dly_tap % err_code); + } + + //Retry the self-cal if it fails + if ((win_start == -1 || (win_stop - win_start) < MIN_WINDOW_LEN) && iter < NUM_RETRIES /*not last iteration*/) { + win_start = -1; + win_stop = -1; + boost::this_thread::sleep(boost::posix_time::milliseconds(2000)); + } else { + break; + } + } + perif.adc->set_test_word("normal", "normal"); + perif.misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 0); + + if (win_start == -1) { + throw uhd::runtime_error("self_cal_adc_capture_delay: Self calibration failed. Convergence error."); + } + + if (win_stop-win_start < MIN_WINDOW_LEN) { + throw uhd::runtime_error("self_cal_adc_capture_delay: Self calibration failed. Valid window too narrow."); + } + + boost::uint32_t ideal_tap = (win_stop + win_start) / 2; + perif.misc_outs->write(radio_misc_outs_reg::ADC_DATA_DLY_VAL, ideal_tap); + perif.misc_outs->write(radio_misc_outs_reg::ADC_DATA_DLY_STB, 1); + perif.misc_outs->write(radio_misc_outs_reg::ADC_DATA_DLY_STB, 0); + + if (print_status) { + double tap_delay = (1.0e12 / mb.clock->get_master_clock_rate()) / (2*32); //in ps + UHD_MSG(status) << boost::format(" done (Tap=%d, Window=%d, TapDelay=%.3fps, Iter=%d)\n") % ideal_tap % (win_stop-win_start) % tap_delay % iter; + } +} + +double x300_impl::self_cal_adc_xfer_delay(mboard_members_t& mb, bool apply_delay) +{ + UHD_MSG(status) << "Running ADC transfer delay self-cal: " << std::flush; + + //Effective resolution of the self-cal. + static const size_t NUM_DELAY_STEPS = 100; + + double master_clk_period = (1.0e9 / mb.clock->get_master_clock_rate()); //in ns + double delay_start = 0.0; + double delay_range = 2 * master_clk_period; + double delay_incr = delay_range / NUM_DELAY_STEPS; + + UHD_MSG(status) << "Measuring..." << std::flush; + double cached_clk_delay = mb.clock->get_clock_delay(X300_CLOCK_WHICH_ADC0); + double fpga_clk_delay = mb.clock->get_clock_delay(X300_CLOCK_WHICH_FPGA); + + //Iterate through several values of delays and measure ADC data integrity + std::vector< std::pair<double,bool> > results; + for (size_t i = 0; i < NUM_DELAY_STEPS; i++) { + //Delay the ADC clock (will set both Ch0 and Ch1 delays) + double delay = mb.clock->set_clock_delay(X300_CLOCK_WHICH_ADC0, delay_incr*i + delay_start); + wait_for_ref_locked(mb.zpu_ctrl, 0.1); + + boost::uint32_t err_code = 0; + for (size_t r = 0; r < mboard_members_t::NUM_RADIOS; r++) { + //Test each channel (I and Q) individually so as to not accidentally trigger + //on the data from the other channel if there is a swap + + // -- Test I Channel -- + //Put ADC in ramp test mode. Tie the other channel to all ones. + mb.radio_perifs[r].adc->set_test_word("ramp", "ones"); + //Turn on the pattern checker in the FPGA. It will lock when it sees a zero + //and count deviations from the expected value + mb.radio_perifs[r].misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 0); + mb.radio_perifs[r].misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 1); + //50ms @ 200MHz = 10 million samples + boost::this_thread::sleep(boost::posix_time::milliseconds(50)); + if (mb.radio_perifs[r].misc_ins->read(radio_misc_ins_reg::ADC_CHECKER1_I_LOCKED)) { + err_code += mb.radio_perifs[r].misc_ins->get(radio_misc_ins_reg::ADC_CHECKER1_I_ERROR); + } else { + err_code += 100; //Increment error code by 100 to indicate no lock + } + + // -- Test Q Channel -- + //Put ADC in ramp test mode. Tie the other channel to all ones. + mb.radio_perifs[r].adc->set_test_word("ones", "ramp"); + //Turn on the pattern checker in the FPGA. It will lock when it sees a zero + //and count deviations from the expected value + mb.radio_perifs[r].misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 0); + mb.radio_perifs[r].misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 1); + //50ms @ 200MHz = 10 million samples + boost::this_thread::sleep(boost::posix_time::milliseconds(50)); + if (mb.radio_perifs[r].misc_ins->read(radio_misc_ins_reg::ADC_CHECKER1_Q_LOCKED)) { + err_code += mb.radio_perifs[r].misc_ins->get(radio_misc_ins_reg::ADC_CHECKER1_Q_ERROR); + } else { + err_code += 100; //Increment error code by 100 to indicate no lock + } + } + //UHD_MSG(status) << (boost::format("XferDelay=%fns, Error=%d\n") % delay % err_code); + results.push_back(std::pair<double,bool>(delay, err_code==0)); + } + + //Calculate the valid window + int win_start_idx = -1, win_stop_idx = -1, cur_start_idx = -1, cur_stop_idx = -1; + for (size_t i = 0; i < results.size(); i++) { + std::pair<double,bool>& item = results[i]; + if (item.second) { //If data is stable + if (cur_start_idx == -1) { //This is the first window + cur_start_idx = i; + cur_stop_idx = i; + } else { //We are extending the window + cur_stop_idx = i; + } + } else { + if (cur_start_idx == -1) { //We haven't yet seen valid data + //Do nothing + } else if (win_start_idx == -1) { //We passed the first valid window + win_start_idx = cur_start_idx; + win_stop_idx = cur_stop_idx; + } else { //Update cached window if current window is larger + double cur_win_len = results[cur_stop_idx].first - results[cur_start_idx].first; + double cached_win_len = results[win_stop_idx].first - results[win_start_idx].first; + if (cur_win_len > cached_win_len) { + win_start_idx = cur_start_idx; + win_stop_idx = cur_stop_idx; + } + } + //Reset current window + cur_start_idx = -1; + cur_stop_idx = -1; + } + } + if (win_start_idx == -1) { + throw uhd::runtime_error("self_cal_adc_xfer_delay: Self calibration failed. Convergence error."); + } + + double win_center = (results[win_stop_idx].first + results[win_start_idx].first) / 2.0; + double win_length = results[win_stop_idx].first - results[win_start_idx].first; + if (win_length < master_clk_period/4) { + throw uhd::runtime_error("self_cal_adc_xfer_delay: Self calibration failed. Valid window too narrow."); + } + + //Cycle slip the relative delay by a clock cycle to prevent sample misalignment + //fpga_clk_delay > 0 and 0 < win_center < 2*(1/MCR) so one cycle slip is all we need + bool cycle_slip = (win_center-fpga_clk_delay >= master_clk_period); + if (cycle_slip) { + win_center -= master_clk_period; + } + + if (apply_delay) { + UHD_MSG(status) << "Validating..." << std::flush; + //Apply delay + win_center = mb.clock->set_clock_delay(X300_CLOCK_WHICH_ADC0, win_center); //Sets ADC0 and ADC1 + wait_for_ref_locked(mb.zpu_ctrl, 0.1); + //Validate + self_test_adcs(mb, 2000); + } else { + //Restore delay + mb.clock->set_clock_delay(X300_CLOCK_WHICH_ADC0, cached_clk_delay); //Sets ADC0 and ADC1 + } + + //Teardown + for (size_t r = 0; r < mboard_members_t::NUM_RADIOS; r++) { + mb.radio_perifs[r].adc->set_test_word("normal", "normal"); + mb.radio_perifs[r].misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 0); + } + UHD_MSG(status) << (boost::format(" done (FPGA->ADC=%.3fns%s, Window=%.3fns)\n") % + (win_center-fpga_clk_delay) % (cycle_slip?" +cyc":"") % win_length); + + return win_center; +} + +static void check_adc(wb_iface::sptr iface, const boost::uint32_t val, const boost::uint32_t i) +{ + boost::uint32_t adc_rb = iface->peek32(RB32_RX); + adc_rb ^= 0xfffc0000; //adapt for I inversion in FPGA + if (val != adc_rb) { + throw uhd::runtime_error( + (boost::format("ADC self-test failed for Radio%d. (Exp=0x%x, Got=0x%x)")%i%val%adc_rb).str()); + } +} + +void x300_impl::self_test_adcs(mboard_members_t& mb, boost::uint32_t ramp_time_ms) { + for (size_t r = 0; r < mboard_members_t::NUM_RADIOS; r++) { + radio_perifs_t &perif = mb.radio_perifs[r]; + + //First test basic patterns + perif.adc->set_test_word("ones", "ones"); check_adc(perif.ctrl, 0xfffcfffc,r); + perif.adc->set_test_word("zeros", "zeros"); check_adc(perif.ctrl, 0x00000000,r); + perif.adc->set_test_word("ones", "zeros"); check_adc(perif.ctrl, 0xfffc0000,r); + perif.adc->set_test_word("zeros", "ones"); check_adc(perif.ctrl, 0x0000fffc,r); + for (size_t k = 0; k < 14; k++) + { + perif.adc->set_test_word("zeros", "custom", 1 << k); + check_adc(perif.ctrl, 1 << (k+2),r); + } + for (size_t k = 0; k < 14; k++) + { + perif.adc->set_test_word("custom", "zeros", 1 << k); + check_adc(perif.ctrl, 1 << (k+18),r); + } + + //Turn on ramp pattern test + perif.adc->set_test_word("ramp", "ramp"); + perif.misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 0); + perif.misc_outs->write(radio_misc_outs_reg::ADC_CHECKER_ENABLED, 1); + } + boost::this_thread::sleep(boost::posix_time::milliseconds(ramp_time_ms)); + for (size_t r = 0; r < mboard_members_t::NUM_RADIOS; r++) { + radio_perifs_t &perif = mb.radio_perifs[r]; + + if (!perif.misc_ins->read(radio_misc_ins_reg::ADC_CHECKER1_I_LOCKED) || + perif.misc_ins->read(radio_misc_ins_reg::ADC_CHECKER1_I_ERROR) || + !perif.misc_ins->read(radio_misc_ins_reg::ADC_CHECKER1_Q_LOCKED) || + perif.misc_ins->read(radio_misc_ins_reg::ADC_CHECKER1_Q_ERROR)) + { + throw uhd::runtime_error( + (boost::format("ADC self-test failed for Radio%d. (Ramp checker failure)")%r).str()); + } + + //Return to normal mode + perif.adc->set_test_word("normal", "normal"); + } +} + diff --git a/host/lib/usrp/x300/x300_impl.hpp b/host/lib/usrp/x300/x300_impl.hpp index 890ef7bcb..64f14cae6 100644 --- a/host/lib/usrp/x300/x300_impl.hpp +++ b/host/lib/usrp/x300/x300_impl.hpp @@ -1,5 +1,5 @@ // -// Copyright 2013-2014 Ettus Research LLC +// Copyright 2013-2015 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -49,6 +49,8 @@ #include <uhd/transport/nirio/niusrprio_session.h> #include <uhd/transport/vrt_if_packet.hpp> #include "recv_packet_demuxer_3000.hpp" +#include <uhd/utils/soft_register.hpp> +#include "x300_regs.hpp" static const std::string X300_FW_FILE_NAME = "usrp_x300_fw.bin"; @@ -140,6 +142,8 @@ uhd::uart_iface::sptr x300_make_uart_iface(uhd::wb_iface::sptr iface); uhd::wb_iface::sptr x300_make_ctrl_iface_enet(uhd::transport::udp_simple::sptr udp); uhd::wb_iface::sptr x300_make_ctrl_iface_pcie(uhd::niusrprio::niriok_proxy::sptr drv_proxy); +uhd::device_addrs_t x300_find(const uhd::device_addr_t &hint_); + class x300_impl : public uhd::device { public: @@ -169,9 +173,43 @@ public: private: boost::shared_ptr<async_md_type> _async_md; + class radio_misc_outs_reg : public uhd::soft_reg32_wo_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(DAC_ENABLED, /*width*/ 1, /*shift*/ 0); //[0] + UHD_DEFINE_SOFT_REG_FIELD(DAC_RESET_N, /*width*/ 1, /*shift*/ 1); //[1] + UHD_DEFINE_SOFT_REG_FIELD(ADC_RESET, /*width*/ 1, /*shift*/ 2); //[2] + UHD_DEFINE_SOFT_REG_FIELD(ADC_DATA_DLY_STB, /*width*/ 1, /*shift*/ 3); //[3] + UHD_DEFINE_SOFT_REG_FIELD(ADC_DATA_DLY_VAL, /*width*/ 5, /*shift*/ 4); //[8:4] + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER_ENABLED, /*width*/ 1, /*shift*/ 9); //[9] + + radio_misc_outs_reg(): uhd::soft_reg32_wo_t(TOREG(SR_MISC_OUTS)) { + //Initial values + set(DAC_ENABLED, 0); + set(DAC_RESET_N, 0); + set(ADC_RESET, 0); + set(ADC_DATA_DLY_STB, 0); + set(ADC_DATA_DLY_VAL, 16); + set(ADC_CHECKER_ENABLED, 0); + } + }; + class radio_misc_ins_reg : public uhd::soft_reg32_ro_t { + public: + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER0_Q_LOCKED, /*width*/ 1, /*shift*/ 0); //[0] + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER0_I_LOCKED, /*width*/ 1, /*shift*/ 1); //[1] + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER1_Q_LOCKED, /*width*/ 1, /*shift*/ 2); //[2] + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER1_I_LOCKED, /*width*/ 1, /*shift*/ 3); //[3] + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER0_Q_ERROR, /*width*/ 1, /*shift*/ 4); //[4] + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER0_I_ERROR, /*width*/ 1, /*shift*/ 5); //[5] + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER1_Q_ERROR, /*width*/ 1, /*shift*/ 6); //[6] + UHD_DEFINE_SOFT_REG_FIELD(ADC_CHECKER1_I_ERROR, /*width*/ 1, /*shift*/ 7); //[7] + + radio_misc_ins_reg(): uhd::soft_reg32_ro_t(RB32_MISC_INS) { } + }; + //perifs in the radio core struct radio_perifs_t { + //Interfaces radio_ctrl_core_3000::sptr ctrl; spi_core_3000::sptr spi; x300_adc_ctrl::sptr adc; @@ -184,6 +222,9 @@ private: gpio_core_200_32wo::sptr leds; rx_frontend_core_200::sptr rx_fe; tx_frontend_core_200::sptr tx_fe; + //Registers + radio_misc_outs_reg::sptr misc_outs; + radio_misc_ins_reg::sptr misc_ins; }; //overflow recovery impl @@ -211,7 +252,8 @@ private: i2c_core_100_wb32::sptr zpu_i2c; //perifs in each radio - radio_perifs_t radio_perifs[2]; //!< This is hardcoded s.t. radio_perifs[0] points to slot A and [1] to B + static const size_t NUM_RADIOS = 2; + radio_perifs_t radio_perifs[NUM_RADIOS]; //!< This is hardcoded s.t. radio_perifs[0] points to slot A and [1] to B uhd::usrp::dboard_eeprom_t db_eeproms[8]; //! Return the index of a radio component, given a slot name. This means DSPs, radio_perifs size_t get_radio_index(const std::string &slot_name) { @@ -259,7 +301,7 @@ private: * \param mb_i Motherboard index * \param slot_name Slot name (A or B). */ - void setup_radio(const size_t, const std::string &slot_name); + void setup_radio(const size_t, const std::string &slot_name, const uhd::device_addr_t &dev_addr); size_t _sid_framer; struct sid_config_t @@ -358,11 +400,15 @@ private: void set_mb_eeprom(uhd::i2c_iface::sptr i2c, const uhd::usrp::mboard_eeprom_t &); void check_fw_compat(const uhd::fs_path &mb_path, uhd::wb_iface::sptr iface); - void check_fpga_compat(const uhd::fs_path &mb_path, uhd::wb_iface::sptr iface); + void check_fpga_compat(const uhd::fs_path &mb_path, const mboard_members_t &members); void update_atr_leds(gpio_core_200_32wo::sptr, const std::string &ant); - boost::uint32_t get_fp_gpio(gpio_core_200::sptr, const std::string &); - void set_fp_gpio(gpio_core_200::sptr, const std::string &, const boost::uint32_t); + boost::uint32_t get_fp_gpio(gpio_core_200::sptr); + void set_fp_gpio(gpio_core_200::sptr, const gpio_attr_t, const boost::uint32_t); + + void self_cal_adc_capture_delay(mboard_members_t& mb, const size_t radio_i, bool print_status = false); + double self_cal_adc_xfer_delay(mboard_members_t& mb, bool apply_delay = false); + void self_test_adcs(mboard_members_t& mb, boost::uint32_t ramp_time_ms = 100); //**PRECONDITION** //This function assumes that all the VITA times in "radios" are synchronized diff --git a/host/lib/usrp/x300/x300_io_impl.cpp b/host/lib/usrp/x300/x300_io_impl.cpp index 334ae8168..e3515af0c 100644 --- a/host/lib/usrp/x300/x300_io_impl.cpp +++ b/host/lib/usrp/x300/x300_io_impl.cpp @@ -23,6 +23,7 @@ #include <uhd/transport/nirio_zero_copy.hpp> #include "async_packet_handler.hpp" #include <uhd/transport/bounded_buffer.hpp> +#include <uhd/transport/chdr.hpp> #include <boost/bind.hpp> #include <uhd/utils/tasks.hpp> #include <uhd/utils/log.hpp> @@ -124,41 +125,6 @@ void x300_impl::update_subdev_spec(const std::string &tx_rx, const size_t mb_i, /*********************************************************************** - * VITA stuff - **********************************************************************/ -static void x300_if_hdr_unpack_be( - const boost::uint32_t *packet_buff, - vrt::if_packet_info_t &if_packet_info -){ - if_packet_info.link_type = vrt::if_packet_info_t::LINK_TYPE_CHDR; - return vrt::if_hdr_unpack_be(packet_buff, if_packet_info); -} - -static void x300_if_hdr_pack_be( - boost::uint32_t *packet_buff, - vrt::if_packet_info_t &if_packet_info -){ - if_packet_info.link_type = vrt::if_packet_info_t::LINK_TYPE_CHDR; - return vrt::if_hdr_pack_be(packet_buff, if_packet_info); -} - -static void x300_if_hdr_unpack_le( - const boost::uint32_t *packet_buff, - vrt::if_packet_info_t &if_packet_info -){ - if_packet_info.link_type = vrt::if_packet_info_t::LINK_TYPE_CHDR; - return vrt::if_hdr_unpack_le(packet_buff, if_packet_info); -} - -static void x300_if_hdr_pack_le( - boost::uint32_t *packet_buff, - vrt::if_packet_info_t &if_packet_info -){ - if_packet_info.link_type = vrt::if_packet_info_t::LINK_TYPE_CHDR; - return vrt::if_hdr_pack_le(packet_buff, if_packet_info); -} - -/*********************************************************************** * RX flow control handler **********************************************************************/ static size_t get_rx_flow_control_window(size_t frame_size, size_t sw_buff_size, const device_addr_t& rx_args) @@ -209,9 +175,9 @@ static void handle_rx_flowctrl(const boost::uint32_t sid, zero_copy_if::sptr xpo //load header if (big_endian) - x300_if_hdr_pack_be(pkt, packet_info); + vrt::chdr::if_hdr_pack_be(pkt, packet_info); else - x300_if_hdr_pack_le(pkt, packet_info); + vrt::chdr::if_hdr_pack_le(pkt, packet_info); //load payload pkt[packet_info.num_header_words32+0] = uhd::htonx<boost::uint32_t>(0); @@ -276,12 +242,12 @@ static void handle_tx_async_msgs(boost::shared_ptr<x300_tx_fc_guts_t> guts, zero { if (big_endian) { - x300_if_hdr_unpack_be(packet_buff, if_packet_info); + vrt::chdr::if_hdr_unpack_be(packet_buff, if_packet_info); endian_conv = uhd::ntohx; } else { - x300_if_hdr_unpack_le(packet_buff, if_packet_info); + vrt::chdr::if_hdr_unpack_le(packet_buff, if_packet_info); endian_conv = uhd::wtohx; } } @@ -430,10 +396,10 @@ rx_streamer::sptr x300_impl::get_rx_stream(const uhd::stream_args_t &args_) //init some streamer stuff std::string conv_endianness; if (mb.if_pkt_is_big_endian) { - my_streamer->set_vrt_unpacker(&x300_if_hdr_unpack_be); + my_streamer->set_vrt_unpacker(&vrt::chdr::if_hdr_unpack_be); conv_endianness = "be"; } else { - my_streamer->set_vrt_unpacker(&x300_if_hdr_unpack_le); + my_streamer->set_vrt_unpacker(&vrt::chdr::if_hdr_unpack_le); conv_endianness = "le"; } @@ -594,10 +560,10 @@ tx_streamer::sptr x300_impl::get_tx_stream(const uhd::stream_args_t &args_) std::string conv_endianness; if (mb.if_pkt_is_big_endian) { - my_streamer->set_vrt_packer(&x300_if_hdr_pack_be); + my_streamer->set_vrt_packer(&vrt::chdr::if_hdr_pack_be); conv_endianness = "be"; } else { - my_streamer->set_vrt_packer(&x300_if_hdr_pack_le); + my_streamer->set_vrt_packer(&vrt::chdr::if_hdr_pack_le); conv_endianness = "le"; } diff --git a/host/lib/usrp/x300/x300_regs.hpp b/host/lib/usrp/x300/x300_regs.hpp index f920b5ae2..e984eb908 100644 --- a/host/lib/usrp/x300/x300_regs.hpp +++ b/host/lib/usrp/x300/x300_regs.hpp @@ -25,40 +25,41 @@ #define localparam static const int -localparam SR_DACSYNC = 5; -localparam SR_LOOPBACK = 6; -localparam SR_TEST = 7; -localparam SR_SPI = 8; -localparam SR_GPIO = 16; -localparam SR_MISC_OUTS = 24; -localparam SR_READBACK = 32; -localparam SR_TX_CTRL = 64; -localparam SR_RX_CTRL = 96; -localparam SR_TIME = 128; -localparam SR_RX_DSP = 144; -localparam SR_TX_DSP = 184; -localparam SR_LEDS = 195; -localparam SR_FP_GPIO = 200; -localparam SR_RX_FRONT = 208; -localparam SR_TX_FRONT = 216; - -localparam RB32_GPIO = 0; -localparam RB32_SPI = 4; -localparam RB64_TIME_NOW = 8; -localparam RB64_TIME_PPS = 16; -localparam RB32_TEST = 24; -localparam RB32_RX = 28; -localparam RB32_FP_GPIO = 32; - -localparam BL_ADDRESS = 0; -localparam BL_DATA = 1; +localparam SR_DACSYNC = 5; +localparam SR_LOOPBACK = 6; +localparam SR_TEST = 7; +localparam SR_SPI = 8; +localparam SR_GPIO = 16; +localparam SR_MISC_OUTS = 24; +localparam SR_READBACK = 32; +localparam SR_TX_CTRL = 64; +localparam SR_RX_CTRL = 96; +localparam SR_TIME = 128; +localparam SR_RX_DSP = 144; +localparam SR_TX_DSP = 184; +localparam SR_LEDS = 195; +localparam SR_FP_GPIO = 200; +localparam SR_RX_FRONT = 208; +localparam SR_TX_FRONT = 216; + +localparam RB32_GPIO = 0; +localparam RB32_SPI = 4; +localparam RB64_TIME_NOW = 8; +localparam RB64_TIME_PPS = 16; +localparam RB32_TEST = 24; +localparam RB32_RX = 28; +localparam RB32_FP_GPIO = 32; +localparam RB32_MISC_INS = 36; + +localparam BL_ADDRESS = 0; +localparam BL_DATA = 1; //wishbone settings map - relevant to host code -#define SET0_BASE 0xa000 -#define SETXB_BASE 0xb000 -#define BOOT_LDR_BASE 0xFA00 -#define I2C0_BASE 0xfe00 -#define I2C1_BASE 0xff00 +#define SET0_BASE 0xa000 +#define SETXB_BASE 0xb000 +#define BOOT_LDR_BASE 0xfa00 +#define I2C0_BASE 0xfe00 +#define I2C1_BASE 0xff00 #define SR_ADDR(base, offset) ((base) + (offset)*4) localparam ZPU_SR_LEDS = 00; @@ -70,56 +71,62 @@ localparam ZPU_SR_ETHINT0 = 40; localparam ZPU_SR_ETHINT1 = 56; //clock controls -#define ZPU_SR_CLOCK_CTRL_CLK_SRC_EXTERNAL 0x00 -#define ZPU_SR_CLOCK_CTRL_CLK_SRC_INTERNAL 0x02 -#define ZPU_SR_CLOCK_CTRL_CLK_SRC_GPSDO 0x03 -#define ZPU_SR_CLOCK_CTRL_PPS_SRC_EXTERNAL 0x00 -#define ZPU_SR_CLOCK_CTRL_PPS_SRC_INTERNAL 0x02 -#define ZPU_SR_CLOCK_CTRL_PPS_SRC_GPSDO 0x03 - -localparam ZPU_RB_SPI = 2; +#define ZPU_SR_CLOCK_CTRL_CLK_SRC_EXTERNAL 0x00 +#define ZPU_SR_CLOCK_CTRL_CLK_SRC_INTERNAL 0x02 +#define ZPU_SR_CLOCK_CTRL_CLK_SRC_GPSDO 0x03 +#define ZPU_SR_CLOCK_CTRL_PPS_SRC_EXTERNAL 0x00 +#define ZPU_SR_CLOCK_CTRL_PPS_SRC_INTERNAL 0x02 +#define ZPU_SR_CLOCK_CTRL_PPS_SRC_GPSDO 0x03 + +localparam ZPU_RB_SPI = 2; localparam ZPU_RB_CLK_STATUS = 3; localparam ZPU_RB_COMPAT_NUM = 6; localparam ZPU_RB_ETH_TYPE0 = 4; localparam ZPU_RB_ETH_TYPE1 = 5; //clock status -#define ZPU_RB_CLK_STATUS_LMK_STATUS (0x3 << 0) -#define ZPU_RB_CLK_STATUS_LMK_LOCK (0x1 << 2) -#define ZPU_RB_CLK_STATUS_LMK_HOLDOVER (0x1 << 3) -#define ZPU_RB_CLK_STATUS_PPS_DETECT (0x1 << 4) +#define ZPU_RB_CLK_STATUS_LMK_STATUS (0x3 << 0) +#define ZPU_RB_CLK_STATUS_LMK_LOCK (0x1 << 2) +#define ZPU_RB_CLK_STATUS_LMK_HOLDOVER (0x1 << 3) +#define ZPU_RB_CLK_STATUS_PPS_DETECT (0x1 << 4) //spi slaves on radio -#define DB_DAC_SEN (1 << 7) -#define DB_ADC_SEN (1 << 6) +#define DB_DAC_SEN (1 << 7) +#define DB_ADC_SEN (1 << 6) #define DB_RX_LSADC_SEN (1 << 5) #define DB_RX_LSDAC_SEN (1 << 4) #define DB_TX_LSADC_SEN (1 << 3) #define DB_TX_LSDAC_SEN (1 << 2) -#define DB_RX_SEN (1 << 1) -#define DB_TX_SEN (1 << 0) +#define DB_RX_SEN (1 << 1) +#define DB_TX_SEN (1 << 0) //------------------------------------------------------------------- // PCIe Registers //------------------------------------------------------------------- -static const uint32_t X300_PCIE_VID = 0x1093; -static const uint32_t X300_PCIE_PID = 0xC4C4; -static const uint32_t X300_USRP_PCIE_SSID = 0x7736; -static const uint32_t X310_USRP_PCIE_SSID = 0x76CA; -static const uint32_t X310_2940R_PCIE_SSID = 0x772B; -static const uint32_t X310_2942R_PCIE_SSID = 0x772C; -static const uint32_t X310_2943R_PCIE_SSID = 0x772D; -static const uint32_t X310_2944R_PCIE_SSID = 0x772E; -static const uint32_t X310_2950R_PCIE_SSID = 0x772F; -static const uint32_t X310_2952R_PCIE_SSID = 0x7730; -static const uint32_t X310_2953R_PCIE_SSID = 0x7731; -static const uint32_t X310_2954R_PCIE_SSID = 0x7732; +static const uint32_t X300_PCIE_VID = 0x1093; +static const uint32_t X300_PCIE_PID = 0xC4C4; +static const uint32_t X300_USRP_PCIE_SSID = 0x7736; +static const uint32_t X310_USRP_PCIE_SSID = 0x76CA; +static const uint32_t X310_2940R_40MHz_PCIE_SSID = 0x772B; +static const uint32_t X310_2940R_120MHz_PCIE_SSID = 0x77FB; +static const uint32_t X310_2942R_40MHz_PCIE_SSID = 0x772C; +static const uint32_t X310_2942R_120MHz_PCIE_SSID = 0x77FC; +static const uint32_t X310_2943R_40MHz_PCIE_SSID = 0x772D; +static const uint32_t X310_2943R_120MHz_PCIE_SSID = 0x77FD; +static const uint32_t X310_2944R_40MHz_PCIE_SSID = 0x772E; +static const uint32_t X310_2950R_40MHz_PCIE_SSID = 0x772F; +static const uint32_t X310_2950R_120MHz_PCIE_SSID = 0x77FE; +static const uint32_t X310_2952R_40MHz_PCIE_SSID = 0x7730; +static const uint32_t X310_2952R_120MHz_PCIE_SSID = 0x77FF; +static const uint32_t X310_2953R_40MHz_PCIE_SSID = 0x7731; +static const uint32_t X310_2953R_120MHz_PCIE_SSID = 0x7800; +static const uint32_t X310_2954R_40MHz_PCIE_SSID = 0x7732; static const uint32_t FPGA_X3xx_SIG_VALUE = 0x58333030; static const uint32_t PCIE_FPGA_ADDR_BASE = 0xC0000; -#define PCIE_FPGA_REG(X) (PCIE_FPGA_ADDR_BASE + X) +#define PCIE_FPGA_REG(X) (PCIE_FPGA_ADDR_BASE + (X)) static const uint32_t FPGA_PCIE_SIG_REG = PCIE_FPGA_REG(0x0000); static const uint32_t FPGA_CNTR_LO_REG = PCIE_FPGA_REG(0x0004); @@ -140,8 +147,8 @@ static const uint32_t DMA_FRAME_SIZE_REG = 0x4; static const uint32_t DMA_SAMPLE_COUNT_REG = 0x8; static const uint32_t DMA_PKT_COUNT_REG = 0xC; -#define PCIE_TX_DMA_REG(REG, CHAN) (PCIE_TX_DMA_REG_BASE + (CHAN*DMA_REG_GRP_SIZE) + REG) -#define PCIE_RX_DMA_REG(REG, CHAN) (PCIE_RX_DMA_REG_BASE + (CHAN*DMA_REG_GRP_SIZE) + REG) +#define PCIE_TX_DMA_REG(REG, CHAN) (PCIE_TX_DMA_REG_BASE + ((CHAN)*DMA_REG_GRP_SIZE) + (REG)) +#define PCIE_RX_DMA_REG(REG, CHAN) (PCIE_RX_DMA_REG_BASE + ((CHAN)*DMA_REG_GRP_SIZE) + (REG)) static const uint32_t DMA_CTRL_DISABLED = 0x00000000; static const uint32_t DMA_CTRL_ENABLED = 0x00000002; @@ -154,15 +161,15 @@ static const uint32_t DMA_STATUS_ERROR = 0x00000001; static const uint32_t DMA_STATUS_BUSY = 0x00000002; static const uint32_t PCIE_ROUTER_REG_BASE = PCIE_FPGA_REG(0x0500); -#define PCIE_ROUTER_REG(X) (PCIE_ROUTER_REG_BASE + X) +#define PCIE_ROUTER_REG(X) (PCIE_ROUTER_REG_BASE + (X)) static const uint32_t PCIE_ZPU_DATA_BASE = 0x30000; static const uint32_t PCIE_ZPU_READ_BASE = 0x20000; //Trig and Status share the same base static const uint32_t PCIE_ZPU_STATUS_BASE = 0x20000; -#define PCIE_ZPU_DATA_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_DATA_BASE) + X) -#define PCIE_ZPU_READ_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_READ_BASE) + X) -#define PCIE_ZPU_STATUS_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_STATUS_BASE) + X) +#define PCIE_ZPU_DATA_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_DATA_BASE) + (X)) +#define PCIE_ZPU_READ_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_READ_BASE) + (X)) +#define PCIE_ZPU_STATUS_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_STATUS_BASE) + (X)) static const uint32_t PCIE_ZPU_READ_START = 0x0; static const uint32_t PCIE_ZPU_READ_CLOBBER = 0x80000000; |