diff options
Diffstat (limited to 'host/lib/usrp')
| -rw-r--r-- | host/lib/usrp/dboard/CMakeLists.txt | 1 | ||||
| -rw-r--r-- | host/lib/usrp/dboard/db_sbx.cpp | 793 | ||||
| -rw-r--r-- | host/lib/usrp/dboard/db_xcvr2450.cpp | 2 |
3 files changed, 795 insertions, 1 deletions
diff --git a/host/lib/usrp/dboard/CMakeLists.txt b/host/lib/usrp/dboard/CMakeLists.txt index 1687713a9..0eff5c4bd 100644 --- a/host/lib/usrp/dboard/CMakeLists.txt +++ b/host/lib/usrp/dboard/CMakeLists.txt @@ -23,6 +23,7 @@ LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/db_basic_and_lf.cpp ${CMAKE_CURRENT_SOURCE_DIR}/db_rfx.cpp ${CMAKE_CURRENT_SOURCE_DIR}/db_xcvr2450.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/db_sbx.cpp ${CMAKE_CURRENT_SOURCE_DIR}/db_wbx_common.cpp ${CMAKE_CURRENT_SOURCE_DIR}/db_wbx_simple.cpp ${CMAKE_CURRENT_SOURCE_DIR}/db_dbsrx.cpp diff --git a/host/lib/usrp/dboard/db_sbx.cpp b/host/lib/usrp/dboard/db_sbx.cpp new file mode 100644 index 000000000..d0c3c63ac --- /dev/null +++ b/host/lib/usrp/dboard/db_sbx.cpp @@ -0,0 +1,793 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +// Common IO Pins +#define LO_LPF_EN (1 << 15) +#define ADF4350_CE (1 << 3) +#define ADF4350_PDBRF (1 << 2) +#define ADF4350_MUXOUT (1 << 1) // INPUT!!! +#define LOCKDET_MASK (1 << 0) // INPUT!!! + +// TX IO Pins +#define TRSW (1 << 14) // 0 = TX, 1 = RX +#define TX_LED_TXRX (1 << 7) // LED for TX Antenna Selection TX/RX +#define TX_LED_LD (1 << 6) // LED for TX Lock Detect +#define DIS_POWER_TX (1 << 5) // on UNIT_TX, 0 powers up TX +#define TX_ENABLE (1 << 4) // on UNIT_TX, 0 disables TX Mixer + +// RX IO Pins +#define LNASW (1 << 14) // 0 = TX/RX, 1 = RX2 +#define RX_LED_RX1RX2 (1 << 7) // LED for RX Antenna Selection RX1/RX2 +#define RX_LED_LD (1 << 6) // LED for RX Lock Detect +#define DIS_POWER_RX (1 << 5) // on UNIT_RX, 0 powers up RX +#define RX_DISABLE (1 << 4) // on UNIT_RX, 1 disables RX Mixer and Baseband + +// RX Attenuator Pins +#define RX_ATTN_SHIFT 8 // lsb of RX Attenuator Control +#define RX_ATTN_MASK (63 << RX_ATTN_SHIFT) // valid bits of RX Attenuator Control + +// TX Attenuator Pins +#define TX_ATTN_SHIFT 8 // lsb of RX Attenuator Control +#define TX_ATTN_MASK (63 << TX_ATTN_SHIFT) // valid bits of RX Attenuator Control + +// Mixer functions +#define TX_MIXER_ENB (ADF4350_PDBRF) +#define TX_MIXER_DIS 0 + +#define RX_MIXER_ENB (ADF4350_PDBRF) +#define RX_MIXER_DIS 0 + +// Pin functions +#define TX_LED_IO (TX_LED_TXRX|TX_LED_LD) // LED gpio lines, pull down for LED +#define TXIO_MASK (LO_LPF_EN|TRSW|ADF4350_CE|ADF4350_PDBRF|TX_ATTN_MASK|DIS_POWER_TX|TX_ENABLE) + +#define RX_LED_IO (RX_LED_RX1RX2|RX_LED_LD) // LED gpio lines, pull down for LED +#define RXIO_MASK (LO_LPF_EN|LNASW|ADF4350_CE|ADF4350_PDBRF|RX_ATTN_MASK|DIS_POWER_RX|RX_DISABLE) + +// Power functions +#define TX_POWER_UP (ADF4350_CE|TX_ENABLE) +#define TX_POWER_DOWN (DIS_POWER_TX) + +#define RX_POWER_UP (ADF4350_CE) +#define RX_POWER_DOWN (DIS_POWER_RX) + +// Antenna constants +#define ANT_TX TRSW //the tx line is transmitting +#define ANT_RX 0 //the tx line is receiving +#define ANT_TXRX 0 //the rx line is on txrx +#define ANT_RX2 LNASW //the rx line in on rx2 +#define ANT_XX LNASW //dont care how the antenna is set + +#include "adf4350_regs.hpp" +#include <uhd/types/dict.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/types/ranges.hpp> +#include <uhd/types/sensors.hpp> +#include <uhd/utils/assert_has.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/utils/algorithm.hpp> +#include <uhd/utils/warning.hpp> +#include <uhd/usrp/dboard_base.hpp> +#include <uhd/usrp/dboard_manager.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/format.hpp> +#include <boost/math/special_functions/round.hpp> +#include <boost/thread.hpp> + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +/*********************************************************************** + * The SBX dboard constants + **********************************************************************/ +static const bool sbx_debug = false; + +static const freq_range_t sbx_freq_range(68.75e6, 4.4e9); + +static const freq_range_t sbx_tx_lo_2dbm = list_of + (range_t(0.35e9, 0.37e9)) +; + +static const freq_range_t sbx_enable_tx_lo_filter = list_of + (range_t(0.4e9, 1.5e9)) +; + +static const freq_range_t sbx_enable_rx_lo_filter = list_of + (range_t(0.4e9, 1.5e9)) +; + +static const prop_names_t sbx_tx_antennas = list_of("TX/RX"); + +static const prop_names_t sbx_rx_antennas = list_of("TX/RX")("RX2"); + +static const uhd::dict<std::string, gain_range_t> sbx_tx_gain_ranges = map_list_of + ("PGA0", gain_range_t(0, 31.5, double(0.5))) +; + +static const uhd::dict<std::string, gain_range_t> sbx_rx_gain_ranges = map_list_of + ("PGA0", gain_range_t(0, 31.5, double(0.5))) +; + +/*********************************************************************** + * The SBX dboard + **********************************************************************/ +class sbx_xcvr : public xcvr_dboard_base{ +public: + sbx_xcvr(ctor_args_t args); + ~sbx_xcvr(void); + + void rx_get(const wax::obj &key, wax::obj &val); + void rx_set(const wax::obj &key, const wax::obj &val); + + void tx_get(const wax::obj &key, wax::obj &val); + void tx_set(const wax::obj &key, const wax::obj &val); + +private: + uhd::dict<std::string, double> _tx_gains, _rx_gains; + double _rx_lo_freq, _tx_lo_freq; + std::string _tx_ant, _rx_ant; + + void set_rx_lo_freq(double freq); + void set_tx_lo_freq(double freq); + void set_rx_ant(const std::string &ant); + void set_tx_ant(const std::string &ant); + void set_rx_gain(double gain, const std::string &name); + void set_tx_gain(double gain, const std::string &name); + + void update_atr(void); + + /*! + * Set the LO frequency for the particular dboard unit. + * \param unit which unit rx or tx + * \param target_freq the desired frequency in Hz + * \return the actual frequency in Hz + */ + double set_lo_freq(dboard_iface::unit_t unit, double target_freq); + + /*! + * Get the lock detect status of the LO. + * \param unit which unit rx or tx + * \return true for locked + */ + bool get_locked(dboard_iface::unit_t unit){ + return (this->get_iface()->read_gpio(unit) & LOCKDET_MASK) != 0; + } + + /*! + * Flash the LEDs + */ + void flash_leds(void) { + //Remove LED gpios from ATR control temporarily and set to outputs + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_TX, TXIO_MASK); + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, RXIO_MASK); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, (TXIO_MASK|RX_LED_IO)); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO)); + + /* + //flash All LEDs + for (int i = 0; i < 3; i++) { + this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_IO, RX_LED_IO); + this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_IO, TX_LED_IO); + + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + + this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, 0, RX_LED_IO); + this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, 0, TX_LED_IO); + + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + } + */ + + this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_LD, TX_LED_IO); + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + + this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_TXRX|TX_LED_LD, TX_LED_IO); + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + + this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_LD, RX_LED_IO); + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + + this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_RX1RX2|RX_LED_LD, RX_LED_IO); + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + + this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_LD, RX_LED_IO); + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + + this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, 0, RX_LED_IO); + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + + this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_LD, TX_LED_IO); + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + + this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, 0, TX_LED_IO); + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + + /* + //flash All LEDs + for (int i = 0; i < 3; i++) { + this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, 0, RX_LED_IO); + this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, 0, TX_LED_IO); + + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + + this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_IO, RX_LED_IO); + this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_IO, TX_LED_IO); + + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + } + */ + //Put LED gpios back in ATR control and update atr + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_TX, (TXIO_MASK|TX_LED_IO)); + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO)); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, (TXIO_MASK|TX_LED_IO)); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO)); + } + +}; + +/*********************************************************************** + * Register the SBX dboard (min freq, max freq, rx div2, tx div2) + **********************************************************************/ +static dboard_base::sptr make_sbx(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new sbx_xcvr(args)); +} + +UHD_STATIC_BLOCK(reg_sbx_dboards){ + dboard_manager::register_dboard(0x0054, 0x0055, &make_sbx, "SBX"); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +sbx_xcvr::sbx_xcvr(ctor_args_t args) : xcvr_dboard_base(args){ + + //enable the clocks that we need + this->get_iface()->set_clock_enabled(dboard_iface::UNIT_TX, true); + this->get_iface()->set_clock_enabled(dboard_iface::UNIT_RX, true); + + //set the gpio directions and atr controls (identically) + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_TX, (TXIO_MASK|TX_LED_IO)); + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO)); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, (TXIO_MASK|TX_LED_IO)); + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO)); + + //flash LEDs + flash_leds(); + + if (sbx_debug) std::cerr << boost::format( + "SBX GPIO Direction: RX: 0x%08x, TX: 0x%08x" + ) % RXIO_MASK % TXIO_MASK << std::endl; + + //set some default values + set_rx_lo_freq((sbx_freq_range.start() + sbx_freq_range.stop())/2.0); + set_tx_lo_freq((sbx_freq_range.start() + sbx_freq_range.stop())/2.0); + set_rx_ant("RX2"); + + BOOST_FOREACH(const std::string &name, sbx_tx_gain_ranges.keys()){ + set_tx_gain(sbx_tx_gain_ranges[name].start(), name); + } + BOOST_FOREACH(const std::string &name, sbx_rx_gain_ranges.keys()){ + set_rx_gain(sbx_rx_gain_ranges[name].start(), name); + } +} + +sbx_xcvr::~sbx_xcvr(void){ + /* NOP */ +} + +/*********************************************************************** + * Gain Handling + **********************************************************************/ +static int rx_pga0_gain_to_iobits(double &gain){ + //clip the input + gain = sbx_rx_gain_ranges["PGA0"].clip(gain); + + //convert to attenuation and update iobits for atr + double attn = sbx_rx_gain_ranges["PGA0"].stop() - gain; + + //calculate the RX attenuation + int attn_code = int(floor(attn*2)); + int iobits = ((~attn_code) << RX_ATTN_SHIFT) & RX_ATTN_MASK; + + + if (sbx_debug) std::cerr << boost::format( + "SBX TX Attenuation: %f dB, Code: %d, IO Bits %x, Mask: %x" + ) % attn % attn_code % (iobits & RX_ATTN_MASK) % RX_ATTN_MASK << std::endl; + + //the actual gain setting + gain = sbx_rx_gain_ranges["PGA0"].stop() - double(attn_code)/2; + + return iobits; +} + +static int tx_pga0_gain_to_iobits(double &gain){ + //clip the input + gain = sbx_tx_gain_ranges["PGA0"].clip(gain); + + //convert to attenuation and update iobits for atr + double attn = sbx_tx_gain_ranges["PGA0"].stop() - gain; + + //calculate the TX attenuation + int attn_code = int(floor(attn*2)); + int iobits = ((~attn_code) << TX_ATTN_SHIFT) & TX_ATTN_MASK; + + + if (sbx_debug) std::cerr << boost::format( + "SBX TX Attenuation: %f dB, Code: %d, IO Bits %x, Mask: %x" + ) % attn % attn_code % (iobits & TX_ATTN_MASK) % TX_ATTN_MASK << std::endl; + + //the actual gain setting + gain = sbx_tx_gain_ranges["PGA0"].stop() - double(attn_code)/2; + + return iobits; +} + +void sbx_xcvr::set_tx_gain(double gain, const std::string &name){ + assert_has(sbx_tx_gain_ranges.keys(), name, "sbx tx gain name"); + if(name == "PGA0"){ + tx_pga0_gain_to_iobits(gain); + _tx_gains[name] = gain; + + //write the new gain to atr regs + update_atr(); + } + else UHD_THROW_INVALID_CODE_PATH(); +} + +void sbx_xcvr::set_rx_gain(double gain, const std::string &name){ + assert_has(sbx_rx_gain_ranges.keys(), name, "sbx rx gain name"); + if(name == "PGA0"){ + rx_pga0_gain_to_iobits(gain); + _rx_gains[name] = gain; + + //write the new gain to atr regs + update_atr(); + } + else UHD_THROW_INVALID_CODE_PATH(); +} + +/*********************************************************************** + * Antenna Handling + **********************************************************************/ +void sbx_xcvr::update_atr(void){ + //calculate atr pins + int rx_pga0_iobits = rx_pga0_gain_to_iobits(_rx_gains["PGA0"]); + int tx_pga0_iobits = tx_pga0_gain_to_iobits(_tx_gains["PGA0"]); + int rx_lo_lpf_en = (_rx_lo_freq == sbx_enable_rx_lo_filter.clip(_rx_lo_freq)) ? LO_LPF_EN : 0; + int tx_lo_lpf_en = (_tx_lo_freq == sbx_enable_tx_lo_filter.clip(_tx_lo_freq)) ? LO_LPF_EN : 0; + int rx_ld_led = get_locked(dboard_iface::UNIT_RX) ? 0 : RX_LED_LD; + int tx_ld_led = get_locked(dboard_iface::UNIT_TX) ? 0 : TX_LED_LD; + int rx_ant_led = _rx_ant == "TX/RX" ? RX_LED_RX1RX2 : 0; + int tx_ant_led = _rx_ant == "TX/RX" ? 0 : TX_LED_TXRX; + + //setup the tx atr (this does not change with antenna) + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, + tx_pga0_iobits | tx_lo_lpf_en | tx_ld_led | tx_ant_led | TX_POWER_UP | ANT_XX | TX_MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, + tx_pga0_iobits | tx_lo_lpf_en | tx_ld_led | tx_ant_led | TX_POWER_UP | ANT_TX | TX_MIXER_ENB); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, + tx_pga0_iobits | tx_lo_lpf_en | tx_ld_led | tx_ant_led | TX_POWER_UP | ANT_TX | TX_MIXER_ENB); + + //setup the rx atr (this does not change with antenna) + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, + rx_pga0_iobits | rx_lo_lpf_en | rx_ld_led | rx_ant_led | RX_POWER_UP | ANT_XX | RX_MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, + rx_pga0_iobits | rx_lo_lpf_en | rx_ld_led | rx_ant_led | RX_POWER_UP | ANT_RX2 | RX_MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, + rx_pga0_iobits | rx_lo_lpf_en | rx_ld_led | rx_ant_led | RX_POWER_UP | ANT_RX2 | RX_MIXER_ENB); + + //set the atr regs that change with antenna setting + this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, + tx_pga0_iobits | tx_lo_lpf_en | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_DIS | + ((_rx_ant == "TX/RX")? ANT_RX : ANT_TX)); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, + rx_pga0_iobits | rx_lo_lpf_en | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB | + ((_rx_ant == "TX/RX")? ANT_TXRX : ANT_RX2)); + + if (sbx_debug) std::cerr << boost::format( + "SBX RXONLY ATR REG: 0x%08x" + ) % (rx_pga0_iobits | RX_POWER_UP | RX_MIXER_ENB | ((_rx_ant == "TX/RX")? ANT_TXRX : ANT_RX2)) << std::endl; +} + +void sbx_xcvr::set_rx_ant(const std::string &ant){ + //validate input + assert_has(sbx_rx_antennas, ant, "sbx rx antenna name"); + + //shadow the setting + _rx_ant = ant; + + //write the new antenna setting to atr regs + update_atr(); +} + +void sbx_xcvr::set_tx_ant(const std::string &ant){ + assert_has(sbx_tx_antennas, ant, "sbx tx antenna name"); + //only one antenna option, do nothing +} + +/*********************************************************************** + * Tuning + **********************************************************************/ +void sbx_xcvr::set_rx_lo_freq(double freq){ + _rx_lo_freq = set_lo_freq(dboard_iface::UNIT_RX, freq); +} + +void sbx_xcvr::set_tx_lo_freq(double freq){ + _tx_lo_freq = set_lo_freq(dboard_iface::UNIT_TX, freq); +} + +double sbx_xcvr::set_lo_freq( + dboard_iface::unit_t unit, + double target_freq +){ + if (sbx_debug) std::cerr << boost::format( + "SBX tune: target frequency %f Mhz" + ) % (target_freq/1e6) << std::endl; + + //clip the input + target_freq = sbx_freq_range.clip(target_freq); + + //map prescaler setting to mininmum integer divider (N) values (pg.18 prescaler) + static const uhd::dict<int, int> prescaler_to_min_int_div = map_list_of + (0,23) //adf4350_regs_t::PRESCALER_4_5 + (1,75) //adf4350_regs_t::PRESCALER_8_9 + ; + + //map rf divider select output dividers to enums + static const uhd::dict<int, adf4350_regs_t::rf_divider_select_t> rfdivsel_to_enum = map_list_of + (1, adf4350_regs_t::RF_DIVIDER_SELECT_DIV1) + (2, adf4350_regs_t::RF_DIVIDER_SELECT_DIV2) + (4, adf4350_regs_t::RF_DIVIDER_SELECT_DIV4) + (8, adf4350_regs_t::RF_DIVIDER_SELECT_DIV8) + (16, adf4350_regs_t::RF_DIVIDER_SELECT_DIV16) + ; + + double actual_freq, pfd_freq; + double ref_freq = this->get_iface()->get_clock_rate(unit); + int R=0, BS=0, N=0, FRAC=0, MOD=0; + int RFdiv = 1; + adf4350_regs_t::reference_divide_by_2_t T = adf4350_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED; + adf4350_regs_t::reference_doubler_t D = adf4350_regs_t::REFERENCE_DOUBLER_DISABLED; + + //Reference doubler for 50% duty cycle + // if ref_freq < 12.5MHz enable regs.reference_divide_by_2 + if(ref_freq <= 12.5e6) D = adf4350_regs_t::REFERENCE_DOUBLER_ENABLED; + + //increase RF divider until acceptable VCO frequency + //start with target_freq*2 because mixer has divide by 2 + double vco_freq = target_freq; + while (vco_freq < 2.2e9) { + vco_freq *= 2; + RFdiv *= 2; + } + + //use 8/9 prescaler for vco_freq > 3 GHz (pg.18 prescaler) + adf4350_regs_t::prescaler_t prescaler = vco_freq > 3e9 ? adf4350_regs_t::PRESCALER_8_9 : adf4350_regs_t::PRESCALER_4_5; + + /* + * The goal here is to loop though possible R dividers, + * band select clock dividers, N (int) dividers, and FRAC + * (frac) dividers. + * + * Calculate the N and F dividers for each set of values. + * The loop exists when it meets all of the constraints. + * The resulting loop values are loaded into the registers. + * + * from pg.21 + * + * f_pfd = f_ref*(1+D)/(R*(1+T)) + * f_vco = (N + (FRAC/MOD))*f_pfd + * N = f_vco/f_pfd - FRAC/MOD = f_vco*((R*(T+1))/(f_ref*(1+D))) - FRAC/MOD + * f_rf = f_vco/RFdiv) + * f_actual = f_rf/2 + */ + for(R = 1; R <= 1023; R+=1){ + //PFD input frequency = f_ref/R ... ignoring Reference doubler/divide-by-2 (D & T) + pfd_freq = ref_freq*(1+D)/(R*(1+T)); + + //keep the PFD frequency at or below 25MHz (Loop Filter Bandwidth) + if (pfd_freq > 25e6) continue; + + //ignore fractional part of tuning + N = int(std::floor(vco_freq/pfd_freq)); + + //keep N > minimum int divider requirement + if (N < prescaler_to_min_int_div[prescaler]) continue; + + for(BS=1; BS <= 255; BS+=1){ + //keep the band select frequency at or below 100KHz + //constraint on band select clock + if (pfd_freq/BS > 100e3) continue; + goto done_loop; + } + } done_loop: + + //Fractional-N calculation + MOD = 4095; //max fractional accuracy + FRAC = int((vco_freq/pfd_freq - N)*MOD); + + //Reference divide-by-2 for 50% duty cycle + // if R even, move one divide by 2 to to regs.reference_divide_by_2 + if(R % 2 == 0){ + T = adf4350_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED; + R /= 2; + } + + //actual frequency calculation + actual_freq = double((N + (double(FRAC)/double(MOD)))*ref_freq*(1+int(D))/(R*(1+int(T)))/RFdiv); + + if (sbx_debug) { + std::cerr << boost::format("SBX Intermediates: ref=%0.2f, outdiv=%f, fbdiv=%f") % (ref_freq*(1+int(D))/(R*(1+int(T)))) % double(RFdiv*2) % double(N + double(FRAC)/double(MOD)) << std::endl; + + std::cerr << boost::format("SBX tune: R=%d, BS=%d, N=%d, FRAC=%d, MOD=%d, T=%d, D=%d, RFdiv=%d, LD=%d" + ) % R % BS % N % FRAC % MOD % T % D % RFdiv % get_locked(unit)<< std::endl + << boost::format("SBX Frequencies (MHz): REQ=%0.2f, ACT=%0.2f, VCO=%0.2f, PFD=%0.2f, BAND=%0.2f" + ) % (target_freq/1e6) % (actual_freq/1e6) % (vco_freq/1e6) % (pfd_freq/1e6) % (pfd_freq/BS/1e6) << std::endl; + } + + //load the register values + adf4350_regs_t regs; + + if ((unit == dboard_iface::UNIT_TX) and (actual_freq == sbx_tx_lo_2dbm.clip(actual_freq))) + regs.output_power = adf4350_regs_t::OUTPUT_POWER_2DBM; + else + regs.output_power = adf4350_regs_t::OUTPUT_POWER_5DBM; + + regs.frac_12_bit = FRAC; + regs.int_16_bit = N; + regs.mod_12_bit = MOD; + regs.prescaler = prescaler; + regs.r_counter_10_bit = R; + regs.reference_divide_by_2 = T; + regs.reference_doubler = D; + regs.band_select_clock_div = BS; + UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(RFdiv)); + regs.rf_divider_select = rfdivsel_to_enum[RFdiv]; + + //write the registers + //correct power-up sequence to write registers (5, 4, 3, 2, 1, 0) + int addr; + + for(addr=5; addr>=0; addr--){ + if (sbx_debug) std::cerr << boost::format( + "SBX SPI Reg (0x%02x): 0x%08x" + ) % addr % regs.get_reg(addr) << std::endl; + this->get_iface()->write_spi( + unit, spi_config_t::EDGE_RISE, + regs.get_reg(addr), 32 + ); + } + + //return the actual frequency + if (sbx_debug) std::cerr << boost::format( + "SBX tune: actual frequency %f Mhz" + ) % (actual_freq/1e6) << std::endl; + return actual_freq; +} + +/*********************************************************************** + * RX Get and Set + **********************************************************************/ +void sbx_xcvr::rx_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = get_rx_id().to_pp_string(); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + assert_has(_rx_gains.keys(), key.name, "sbx rx gain name"); + val = _rx_gains[key.name]; + return; + + case SUBDEV_PROP_GAIN_RANGE: + assert_has(sbx_rx_gain_ranges.keys(), key.name, "sbx rx gain name"); + val = sbx_rx_gain_ranges[key.name]; + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(sbx_rx_gain_ranges.keys()); + return; + + case SUBDEV_PROP_FREQ: + val = _rx_lo_freq; + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = sbx_freq_range; + return; + + case SUBDEV_PROP_ANTENNA: + val = _rx_ant; + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = sbx_rx_antennas; + return; + + case SUBDEV_PROP_CONNECTION: + val = SUBDEV_CONN_COMPLEX_IQ; + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_ENABLED: + val = true; //always enabled + return; + + case SUBDEV_PROP_SENSOR: + UHD_ASSERT_THROW(key.name == "lo_locked"); + val = sensor_value_t("LO", this->get_locked(dboard_iface::UNIT_RX), "locked", "unlocked"); + return; + + case SUBDEV_PROP_SENSOR_NAMES: + val = prop_names_t(1, "lo_locked"); + return; + + case SUBDEV_PROP_BANDWIDTH: + val = 2*20.0e6; //20MHz low-pass, we want complex double-sided + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void sbx_xcvr::rx_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + this->set_rx_lo_freq(val.as<double>()); + return; + + case SUBDEV_PROP_GAIN: + this->set_rx_gain(val.as<double>(), key.name); + return; + + case SUBDEV_PROP_ANTENNA: + this->set_rx_ant(val.as<std::string>()); + return; + + case SUBDEV_PROP_ENABLED: + return; //always enabled + + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("SBX: No tunable bandwidth, fixed filtered to 40MHz")) + ); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX Get and Set + **********************************************************************/ +void sbx_xcvr::tx_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = get_tx_id().to_pp_string(); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + assert_has(_tx_gains.keys(), key.name, "sbx tx gain name"); + val = _tx_gains[key.name]; + return; + + case SUBDEV_PROP_GAIN_RANGE: + assert_has(sbx_tx_gain_ranges.keys(), key.name, "sbx tx gain name"); + val = sbx_tx_gain_ranges[key.name]; + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(sbx_tx_gain_ranges.keys()); + return; + + case SUBDEV_PROP_FREQ: + val = _tx_lo_freq; + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = sbx_freq_range; + return; + + case SUBDEV_PROP_ANTENNA: + val = std::string("TX/RX"); + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = sbx_tx_antennas; + return; + + case SUBDEV_PROP_CONNECTION: + val = SUBDEV_CONN_COMPLEX_QI; + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_ENABLED: + val = true; //always enabled + return; + + case SUBDEV_PROP_SENSOR: + UHD_ASSERT_THROW(key.name == "lo_locked"); + val = sensor_value_t("LO", this->get_locked(dboard_iface::UNIT_TX), "locked", "unlocked"); + return; + + case SUBDEV_PROP_SENSOR_NAMES: + val = prop_names_t(1, "lo_locked"); + return; + + case SUBDEV_PROP_BANDWIDTH: + val = 2*20.0e6; //20MHz low-pass, we want complex double-sided + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void sbx_xcvr::tx_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + + case SUBDEV_PROP_FREQ: + this->set_tx_lo_freq(val.as<double>()); + return; + + case SUBDEV_PROP_GAIN: + this->set_tx_gain(val.as<double>(), key.name); + return; + + case SUBDEV_PROP_ANTENNA: + this->set_tx_ant(val.as<std::string>()); + return; + + case SUBDEV_PROP_ENABLED: + return; //always enabled + + case SUBDEV_PROP_BANDWIDTH: + uhd::warning::post( + str(boost::format("SBX: No tunable bandwidth, fixed filtered to 40MHz")) + ); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/dboard/db_xcvr2450.cpp b/host/lib/usrp/dboard/db_xcvr2450.cpp index 70b0bbabd..45f600569 100644 --- a/host/lib/usrp/dboard/db_xcvr2450.cpp +++ b/host/lib/usrp/dboard/db_xcvr2450.cpp @@ -153,7 +153,7 @@ private: */ double get_rssi(void){ //*FIXME* RSSI depends on LNA Gain Setting (datasheet pg 16 top middle chart) - double max_power; + double max_power = 0.0; switch(_max2829_regs.rx_lna_gain){ case 0: case 1: max_power = 0; break; |