diff options
Diffstat (limited to 'host/lib/usrp')
-rw-r--r-- | host/lib/usrp/dboard/db_sbx_common.cpp | 27 | ||||
-rw-r--r-- | host/lib/usrp/dboard/db_sbx_common.hpp | 29 | ||||
-rw-r--r-- | host/lib/usrp/dboard/db_ubx.cpp | 16 | ||||
-rw-r--r-- | host/lib/usrp/x300/x300_impl.cpp | 16 |
4 files changed, 66 insertions, 22 deletions
diff --git a/host/lib/usrp/dboard/db_sbx_common.cpp b/host/lib/usrp/dboard/db_sbx_common.cpp index 8df4028e7..42c080155 100644 --- a/host/lib/usrp/dboard/db_sbx_common.cpp +++ b/host/lib/usrp/dboard/db_sbx_common.cpp @@ -118,27 +118,24 @@ sbx_xcvr::sbx_xcvr(ctor_args_t args) : xcvr_dboard_base(args){ switch(get_rx_id().to_uint16()) { case 0x0054: db_actual = sbx_versionx_sptr(new sbx_version3(this)); - freq_range = sbx_freq_range; + freq_range = sbx_freq_range; + enable_rx_lo_filter = sbx_enable_rx_lo_filter; + enable_tx_lo_filter = sbx_enable_tx_lo_filter; break; case 0x0065: - db_actual = sbx_versionx_sptr(new sbx_version4(this)); - freq_range = sbx_freq_range; - break; - case 0x0067: - db_actual = sbx_versionx_sptr(new cbx(this)); - freq_range = cbx_freq_range; - break; case 0x0069: - db_actual = sbx_versionx_sptr(new sbx_version4(this)); - freq_range = sbx_freq_range; - break; case 0x0083: db_actual = sbx_versionx_sptr(new sbx_version4(this)); - freq_range = sbx_freq_range; + freq_range = sbx_freq_range; + enable_rx_lo_filter = sbx_enable_rx_lo_filter; + enable_tx_lo_filter = sbx_enable_tx_lo_filter; break; + case 0x0067: case 0x0085: db_actual = sbx_versionx_sptr(new cbx(this)); - freq_range = cbx_freq_range; + freq_range = cbx_freq_range; + enable_rx_lo_filter = cbx_enable_rx_lo_filter; + enable_tx_lo_filter = cbx_enable_tx_lo_filter; break; default: /* We didn't recognize the version of the board... */ @@ -256,8 +253,8 @@ void sbx_xcvr::update_atr(void){ //calculate atr pins int rx_pga0_iobits = rx_pga0_gain_to_iobits(_rx_gains["PGA0"]); int tx_pga0_iobits = tx_pga0_gain_to_iobits(_tx_gains["PGA0"]); - int rx_lo_lpf_en = (_rx_lo_freq == sbx_enable_rx_lo_filter.clip(_rx_lo_freq)) ? LO_LPF_EN : 0; - int tx_lo_lpf_en = (_tx_lo_freq == sbx_enable_tx_lo_filter.clip(_tx_lo_freq)) ? LO_LPF_EN : 0; + int rx_lo_lpf_en = (_rx_lo_freq == enable_rx_lo_filter.clip(_rx_lo_freq)) ? LO_LPF_EN : 0; + int tx_lo_lpf_en = (_tx_lo_freq == enable_tx_lo_filter.clip(_tx_lo_freq)) ? LO_LPF_EN : 0; int rx_ld_led = _rx_lo_lock_cache ? 0 : RX_LED_LD; int tx_ld_led = _tx_lo_lock_cache ? 0 : TX_LED_LD; int rx_ant_led = _rx_ant == "TX/RX" ? RX_LED_RX1RX2 : 0; diff --git a/host/lib/usrp/dboard/db_sbx_common.hpp b/host/lib/usrp/dboard/db_sbx_common.hpp index 0e4dc5ace..8f305a7c4 100644 --- a/host/lib/usrp/dboard/db_sbx_common.hpp +++ b/host/lib/usrp/dboard/db_sbx_common.hpp @@ -116,6 +116,14 @@ static const freq_range_t sbx_enable_rx_lo_filter = list_of (range_t(0.4e9, 1.5e9)) ; +static const freq_range_t cbx_enable_tx_lo_filter = list_of + (range_t(1.2e9, 2e9)) +; + +static const freq_range_t cbx_enable_rx_lo_filter = list_of + (range_t(1.2e9, 2e9)) +; + static const std::vector<std::string> sbx_tx_antennas = list_of("TX/RX")("CAL"); static const std::vector<std::string> sbx_rx_antennas = list_of("TX/RX")("RX2")("CAL"); @@ -226,9 +234,12 @@ protected: /*! * CBX daughterboard * - * The only driver difference between SBX and CBX is the MAX2870 vs. ADF435x. - * There is also no LO filter switching required, but the GPIO is left blank - * so we don't worry about it. + * There are a few differences between SBX and CBX + * - The CBX and SBX use the MAX2870 and ADF435x respectively for LOs + * - There are different frequency ranges + * - There are different LO LPF cutoff frequencies + * There is also no LO filter switching required on CBX, but the GPIO is left + * blank so we don't worry about it. */ class cbx : public sbx_versionx { public: @@ -252,6 +263,18 @@ protected: freq_range_t freq_range; /*! + * Frequency range to use the LO LPF in RX; this is set in the constructor + * to correspond either to SBX or CBX. + */ + freq_range_t enable_rx_lo_filter; + + /*! + * Frequency range to use the LO LPF in TX; this is set in the constructor + * to correspond either to SBX or CBX. + */ + freq_range_t enable_tx_lo_filter; + + /*! * Handle to the version-specific implementation of the SBX. * * Since many of this class's functions are dependent on the version of the diff --git a/host/lib/usrp/dboard/db_ubx.cpp b/host/lib/usrp/dboard/db_ubx.cpp index d25aabe98..21308b08c 100644 --- a/host/lib/usrp/dboard/db_ubx.cpp +++ b/host/lib/usrp/dboard/db_ubx.cpp @@ -295,6 +295,7 @@ public: _tx_target_pfd_freq = pfd_freq_max; if (_rev >= 1) { + bool can_set_clock_rate = true; // set dboard clock rates to as close to the max PFD freq as possible if (_iface->get_clock_rate(dboard_iface::UNIT_RX) > pfd_freq_max) { @@ -305,10 +306,15 @@ public: if (rate <= pfd_freq_max and rate > highest_rate) highest_rate = rate; } - _iface->set_clock_rate(dboard_iface::UNIT_RX, highest_rate); + try { + _iface->set_clock_rate(dboard_iface::UNIT_RX, highest_rate); + } catch (const uhd::not_implemented_error &) { + UHD_MSG(warning) << "Unable to set dboard clock rate - phase will vary" << std::endl; + can_set_clock_rate = false; + } _rx_target_pfd_freq = highest_rate; } - if (_iface->get_clock_rate(dboard_iface::UNIT_TX) > pfd_freq_max) + if (can_set_clock_rate and _iface->get_clock_rate(dboard_iface::UNIT_TX) > pfd_freq_max) { std::vector<double> rates = _iface->get_clock_rates(dboard_iface::UNIT_TX); double highest_rate = 0.0; @@ -317,7 +323,11 @@ public: if (rate <= pfd_freq_max and rate > highest_rate) highest_rate = rate; } - _iface->set_clock_rate(dboard_iface::UNIT_TX, highest_rate); + try { + _iface->set_clock_rate(dboard_iface::UNIT_TX, highest_rate); + } catch (const uhd::not_implemented_error &) { + UHD_MSG(warning) << "Unable to set dboard clock rate - phase will vary" << std::endl; + } _tx_target_pfd_freq = highest_rate; } } diff --git a/host/lib/usrp/x300/x300_impl.cpp b/host/lib/usrp/x300/x300_impl.cpp index 1c8eeab51..1e22f7fb7 100644 --- a/host/lib/usrp/x300/x300_impl.cpp +++ b/host/lib/usrp/x300/x300_impl.cpp @@ -332,7 +332,21 @@ device_addrs_t x300_find(const device_addr_t &hint_) //call discover with the new hint and append results device_addrs_t new_addrs = x300_find(new_hint); - addrs.insert(addrs.begin(), new_addrs.begin(), new_addrs.end()); + //if we are looking for a serial, only add the one device with a matching serial + if (hint.has_key("serial")) { + bool found_serial = false; //signal to break out of the interface loop + for (device_addrs_t::iterator new_addr_it=new_addrs.begin(); new_addr_it != new_addrs.end(); new_addr_it++) { + if ((*new_addr_it)["serial"] == hint["serial"]) { + addrs.insert(addrs.begin(), *new_addr_it); + found_serial = true; + break; + } + } + if (found_serial) break; + } else { + // Otherwise, add all devices we find + addrs.insert(addrs.begin(), new_addrs.begin(), new_addrs.end()); + } } } |