diff options
Diffstat (limited to 'host/lib/usrp')
| -rw-r--r-- | host/lib/usrp/x300/x300_clock_ctrl.cpp | 1 | ||||
| -rw-r--r-- | host/lib/usrp/x300/x300_dac_ctrl.cpp | 210 | ||||
| -rw-r--r-- | host/lib/usrp/x300/x300_dac_ctrl.hpp | 14 | ||||
| -rw-r--r-- | host/lib/usrp/x300/x300_impl.cpp | 273 | ||||
| -rw-r--r-- | host/lib/usrp/x300/x300_impl.hpp | 12 | ||||
| -rw-r--r-- | host/lib/usrp/x300/x300_io_impl.cpp | 9 |
6 files changed, 318 insertions, 201 deletions
diff --git a/host/lib/usrp/x300/x300_clock_ctrl.cpp b/host/lib/usrp/x300/x300_clock_ctrl.cpp index 21411e651..247c10ac4 100644 --- a/host/lib/usrp/x300/x300_clock_ctrl.cpp +++ b/host/lib/usrp/x300/x300_clock_ctrl.cpp @@ -49,7 +49,6 @@ x300_clock_ctrl_impl(uhd::spi_iface::sptr spiface, _master_clock_rate(master_clock_rate), _system_ref_rate(system_ref_rate) { - set_master_clock_rate(master_clock_rate); } void reset_clocks() { diff --git a/host/lib/usrp/x300/x300_dac_ctrl.cpp b/host/lib/usrp/x300/x300_dac_ctrl.cpp index 62fe55c35..d3bcb8644 100644 --- a/host/lib/usrp/x300/x300_dac_ctrl.cpp +++ b/host/lib/usrp/x300/x300_dac_ctrl.cpp @@ -25,6 +25,8 @@ #include <boost/foreach.hpp> #include <boost/thread/thread.hpp> //sleep +#define X300_DAC_FRONTEND_SYNC_FAILURE_FATAL + using namespace uhd; #define write_ad9146_reg(addr, data) \ @@ -45,19 +47,68 @@ public: x300_dac_ctrl_impl(uhd::spi_iface::sptr iface, const size_t slaveno, const double refclk): _iface(iface), _slaveno(slaveno), _refclk(refclk) { - init(); - check_pll(); + //Power up all DAC subsystems + write_ad9146_reg(0x01, 0x10); //Up: I DAC, Q DAC, Receiver, Voltage Ref, Clocks + write_ad9146_reg(0x02, 0x00); //No extended delays. Up: Voltage Ref, PLL, DAC, FIFO, Filters + + reset(); } - void init() + ~x300_dac_ctrl_impl(void) { - write_ad9146_reg(0x00, 0x20); // Take DAC into reset. - write_ad9146_reg(0x00, 0x80); // Enable SPI reads and come out of reset - write_ad9146_reg(0x1e, 0x01); // Data path config - set for proper operation + UHD_SAFE_CALL + ( + //Power down all DAC subsystems + write_ad9146_reg(0x01, 0xEF); //Down: I DAC, Q DAC, Receiver, Voltage Ref, Clocks + write_ad9146_reg(0x02, 0x1F); //No extended delays. Down: Voltage Ref, PLL, DAC, FIFO, Filters + ) + } + + void reset() + { + //ADI recommendations: + //- soft reset the chip before configuration + //- put the chip in sleep mode during configuration and wake it up when done + _soft_reset(); + _sleep_mode(true); + _init(); + _sleep_mode(false); + } + + void reset_and_resync() + { + //ADI recommendations: + //- soft reset the chip before configuration + //- put the chip in sleep mode during configuration and wake it up when done + //- configure synchronization settings when sleeping + _soft_reset(); + _sleep_mode(true); + _init(); + _backend_sync(); + _sleep_mode(false); + } + + void verify_sync() + { + _check_pll(); + _check_dac_sync(); +#ifdef X300_DAC_FRONTEND_SYNC_FAILURE_FATAL + _check_frontend_sync(true); +#else + _check_frontend_sync(false); +#endif + } + + // + // Setup all non-synchronization related DAC parameters + // + void _init() + { + write_ad9146_reg(0x1e, 0x01); //Datasheet: "Set 1 for proper operation" + write_ad9146_reg(0x06, 0xFF); //Clear all event flags // Calculate N0 to be VCO friendly. // Aim for VCO between 1 and 2GHz, assert otherwise. - // const int N1 = 4; const int N1 = 4; int N0_val, N0; for (N0_val = 0; N0_val < 3; N0_val++) @@ -68,78 +119,83 @@ public: UHD_ASSERT_THROW((_refclk * N0 * N1) >= 1e9); UHD_ASSERT_THROW((_refclk * N0 * N1) <= 2e9); - /* Start PLL */ - //write_ad9146_reg(0x0C, 0xD1); // Narrow PLL loop filter, Midrange charge pump. + // Start PLL + write_ad9146_reg(0x06, 0xC0); //Clear PLL event flags + write_ad9146_reg(0x0C, 0xD1); // Narrow PLL loop filter, Midrange charge pump. write_ad9146_reg(0x0D, 0xD1 | (N0_val << 2)); // N1=4, N2=16, N0 as calculated - //write_ad9146_reg(0x0D, 0x90 | (N0_val << 2)); // N1=2, N2=8, N0 as calculated write_ad9146_reg(0x0A, 0xCF); // Auto init VCO band training as per datasheet write_ad9146_reg(0x0A, 0xA0); // See above. - /* Skew DCI signal to find stable data eye */ - //write_ad9146_reg(0x16, 0x04); //Disable delay in DCI - //write_ad9146_reg(0x16, 0x00); //165ps delay in DCI - //write_ad9146_reg(0x16, 0x01); //375ps delay in DCI - write_ad9146_reg(0x16, 0x02); //615ps delay in DCI - //write_ad9146_reg(0x16, 0x03); //720ps delay in DCI + _check_pll(); + // Configure digital interface settings + write_ad9146_reg(0x16, 0x02); // Skew DCI signal by 615ps to find stable data eye write_ad9146_reg(0x03, 0x00); // 2's comp, I first, byte wide interface - //fpga wants I,Q in the sample word: //first transaction goes into low bits //second transaction goes into high bits //therefore, we want Q to go first (bit 6 == 1) write_ad9146_reg(0x03, (1 << 6)); //2s comp, i first, byte mode - write_ad9146_reg(0x10, 0x48); // Disable SYNC mode. - - // FIFO write pointer offset - // It was found that the read was happening before the write - // so the FIFO was maintainining a depth of 3 during operation. - // Setting it to 5 to ensure it maintains the ideal depth of 4. - // TODO: Investigate RefClk -> DCI clock timing. - write_ad9146_reg(0x17, 0x05); - - write_ad9146_reg(0x18, 0x02); // Request soft FIFO align - write_ad9146_reg(0x18, 0x00); // (See above) - write_ad9146_reg(0x1B, 0xE4); // Bypass: Modulator, InvSinc, IQ Bal - - /* Configure interpolation filters */ + // Configure interpolation filters write_ad9146_reg(0x1C, 0x00); // Configure HB1 write_ad9146_reg(0x1D, 0x00); // Configure HB2 + write_ad9146_reg(0x1B, 0xE4); // Bypass: Modulator, InvSinc, IQ Bal - // Clear event flags - write_ad9146_reg(0x06, 0xFF); - } - - - ~x300_dac_ctrl_impl(void) - { - UHD_SAFE_CALL - ( - write_ad9146_reg(0x1, 0xf); //total power down - write_ad9146_reg(0x2, 0xf); //total power down - ) + // Disable sync mode by default (may get turned on later) + write_ad9146_reg(0x10, 0x40); // Disable SYNC mode. } - void arm_dac_sync(void) + // + // Attempt to synchronize AD9146's + // + void _backend_sync(void) { - // - // Attempt to synchronize AD9146's - // - write_ad9146_reg(0x10, 0x48); // Disable SYNC mode. + write_ad9146_reg(0x10, 0x40); // Disable SYNC mode to reset state machines. write_ad9146_reg(0x06, 0x30); // Clear Sync event flags - write_ad9146_reg(0x10, 0xCF); // Enable SYNC mode. Sync Averaging set to 128. - } - void reset() - { - init(); + //SYNC Settings: + //- SYNC = Enabled + //- Data Rate Mode: Synchronize at the rate at which data is consumed and not at + // the granularity of the FIFO + //- Falling edge sync: For the X300, DACCLK is generated using RefClk. Within the + // DAC, the RefClk is sampled by DACCLK to sync interpolation + // stages across multiple DACs. To ensure that we capture the + // RefClk when it is not transitioning, we sample on the falling + // edge of DACCLK + //- Averaging = MAX + write_ad9146_reg(0x10, 0xC7); // Enable SYNC mode. Falling edge sync. Averaging set to 128. + + //Wait for backend SYNC state machine to lock before proceeding. This guarantees that the + //inputs and output of the FIFO have synchronized clocks + _check_dac_sync(); + + //FIFO write pointer offset + //One of ADI's requirements to use data-rate synchronization in PLL mode is to meet + //setup and hold times for RefClk -> DCI clock which we *do not* currently meet in + //the FPGA. The DCI clock reaches a full RefClk cycle later which results in the + //FIFO popping before the first push. This results in a steady-state FIFO fullness + //of pointer - 1. To reach the optimal FIFO fullness of 4 we set the pointer to 5. + //FIXME: At some point we should meet timing on this interface + write_ad9146_reg(0x17, 0x05); + + // We are requesting a soft FIFO align just to put the FIFO + // in a known state. The FRAME will actually do sync the + // FIFO correctly when a stream is created + write_ad9146_reg(0x18, 0x02); // Request soft FIFO align + write_ad9146_reg(0x18, 0x00); // (See above) + + //Verify the FIFO thermometer + _check_frontend_sync(false); //FIFO sanity check } - void check_pll() + // + // Check for PLL lock. Fatal if not locked within timeout + // + void _check_pll() { // Verify PLL is Locked. 1 sec timeout. - // NOTE: Data sheet inconsistant about which pins give PLL lock status. FIXME! + // NOTE: Data sheet inconsistent about which pins give PLL lock status. FIXME! const time_spec_t exit_time = time_spec_t::get_system_time() + time_spec_t(1.0); while (true) { @@ -149,13 +205,16 @@ public: break; if (exit_time < time_spec_t::get_system_time()) throw uhd::runtime_error("x300_dac_ctrl: timeout waiting for DAC PLL to lock"); - if (reg_6 & (1 << 7)) // Sync lost? + if (reg_6 & (1 << 7)) // Lock lost? write_ad9146_reg(0x06, 0xC0); // Clear PLL event flags boost::this_thread::sleep(boost::posix_time::milliseconds(10)); } } - void check_dac_sync() + // + // Check for DAC sync. Fatal if not synced within timeout + // + void _check_dac_sync() { const time_spec_t exit_time = time_spec_t::get_system_time() + time_spec_t(1.0); while (true) @@ -167,19 +226,44 @@ public: break; if (exit_time < time_spec_t::get_system_time()) throw uhd::runtime_error("x300_dac_ctrl: timeout waiting for backend synchronization"); - if (reg_12 & (1 << 7)) // Sync acquired and lost? - arm_dac_sync(); // Re-arm and try again - else if (reg_6 & (1 << 5)) + if (reg_6 & (1 << 5)) write_ad9146_reg(0x06, 0x30); // Clear Sync event flags +#ifdef X300_DAC_RETRY_BACKEND_SYNC + if (reg_12 & (1 << 7)) // Sync acquired and lost? + write_ad9146_reg(0x10, 0xC7); // Enable SYNC mode. Falling edge sync. Averaging set to 128. +#endif } } - void check_frontend_sync() + // + // Check FIFO thermometer. + // + void _check_frontend_sync(bool failure_is_fatal) { // Register 0x19 has a thermometer indicator of the FIFO depth const size_t reg_19 = read_ad9146_reg(0x19); - if ((reg_19 & 0xFF) != 0xF) - UHD_MSG(warning) << "x300_dac_ctrl: unexpected FIFO depth [0x" << std::hex << (reg_19 & 0xFF) << std::dec << "]" << std::endl; + if ((reg_19 & 0xFF) != 0xF) { + std::string msg((boost::format("x300_dac_ctrl: front-end sync failed. unexpected FIFO depth [0x%x]\n") % (reg_19 & 0xFF)).str()); + if (failure_is_fatal) { + throw uhd::runtime_error(msg); + } else { + UHD_MSG(warning) << msg; + } + } + } + + void _sleep_mode(bool sleep) + { + boost::uint8_t sleep_val = sleep ? (1<<7) : 0x00; + //Set sleep word and default fullscale value + write_ad9146_reg(0x41, sleep_val | 0x01); //I DAC + write_ad9146_reg(0x45, sleep_val | 0x01); //Q DAC + } + + void _soft_reset() + { + write_ad9146_reg(0x00, 0x20); // Take DAC into reset. + write_ad9146_reg(0x00, 0x80); // Enable SPI reads and come out of reset } private: diff --git a/host/lib/usrp/x300/x300_dac_ctrl.hpp b/host/lib/usrp/x300/x300_dac_ctrl.hpp index 5fd7e13d8..c2e509b54 100644 --- a/host/lib/usrp/x300/x300_dac_ctrl.hpp +++ b/host/lib/usrp/x300/x300_dac_ctrl.hpp @@ -37,20 +37,14 @@ public: */ static sptr make(uhd::spi_iface::sptr iface, const size_t slaveno, const double clock_rate); - // ! Arm the sync feature in DAC - virtual void arm_dac_sync(void) = 0; - - // ! Check for successful backend sync - virtual void check_dac_sync(void) = 0; - // ! Reset the DAC virtual void reset(void) = 0; - // ! Check for PLL lock - virtual void check_pll(void) = 0; + // ! Reset the DAC and resync + virtual void reset_and_resync(void) = 0; - // ! Check for successful frontend sync - virtual void check_frontend_sync(void) = 0; + // ! Check for successful backend and frontend sync + virtual void verify_sync(void) = 0; }; #endif /* INCLUDED_X300_DAC_CTRL_HPP */ diff --git a/host/lib/usrp/x300/x300_impl.cpp b/host/lib/usrp/x300/x300_impl.cpp index b4286ee79..5520cc82e 100644 --- a/host/lib/usrp/x300/x300_impl.cpp +++ b/host/lib/usrp/x300/x300_impl.cpp @@ -372,6 +372,7 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) { const fs_path mb_path = "/mboards/"+boost::lexical_cast<std::string>(mb_i); mboard_members_t &mb = _mb[mb_i]; + mb.initialization_done = false; mb.addr = dev_addr.has_key("resource") ? dev_addr["resource"] : dev_addr["addr"]; mb.xport_path = dev_addr.has_key("resource") ? "nirio" : "eth"; @@ -621,32 +622,18 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) mb.hw_rev = X300_REV("D"); } - //Initialize clock control with internal references and GPSDO power on. - mb.clock_control_regs_clock_source = ZPU_SR_CLOCK_CTRL_CLK_SRC_INTERNAL; - mb.clock_control_regs_pps_select = ZPU_SR_CLOCK_CTRL_PPS_SRC_INTERNAL; - mb.clock_control_regs_pps_out_enb = 0; - mb.clock_control_regs_tcxo_enb = 1; - mb.clock_control_regs_gpsdo_pwr = 1; - this->update_clock_control(mb); - - //Create clock control + //Create clock control. NOTE: This does not configure the LMK yet. + initialize_clock_control(mb); mb.clock = x300_clock_ctrl::make(mb.zpu_spi, 1 /*slaveno*/, mb.hw_rev, dev_addr.cast<double>("master_clock_rate", X300_DEFAULT_TICK_RATE), dev_addr.cast<double>("system_ref_rate", X300_DEFAULT_SYSREF_RATE)); - //wait for reference clock to lock - if(mb.hw_rev > 4) - { - try { - //FIXME: Need to verify timeout value to make sure lock can be achieved in < 1.0 seconds - wait_for_ref_locked(mb.zpu_ctrl, 1.0); - } catch (uhd::runtime_error &e) { - //Silently fail for now, but fix after we have the correct timeout value - //UHD_MSG(warning) << "Clock failed to lock to internal source during initialization." << std::endl; - } - } + //Initialize clock source to use internal reference and generate + //a valid radio clock. This may change after configuration is done. + //This will configure the LMK and wait for lock + update_clock_source(mb, "internal"); //////////////////////////////////////////////////////////////////// // create clock properties @@ -750,7 +737,6 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) _tree->create<std::string>(mb_path / "clock_source" / "value") .set("internal") .subscribe(boost::bind(&x300_impl::update_clock_source, this, boost::ref(mb), _1)) - .subscribe(boost::bind(&x300_impl::reset_clocks, this, boost::ref(mb))) .subscribe(boost::bind(&x300_impl::reset_radios, this, boost::ref(mb))); static const std::vector<std::string> clock_source_options = boost::assign::list_of("internal")("external")("gpsdo"); @@ -769,6 +755,22 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) _tree->create<bool>(mb_path / "clock_source" / "output") .subscribe(boost::bind(&x300_clock_ctrl::set_ref_out, mb.clock, _1)); + //////////////////////////////////////////////////////////////////// + // initialize clock and time sources + //////////////////////////////////////////////////////////////////// + if (mb.gps and mb.gps->gps_detected()) + { + UHD_MSG(status) << "Initializing clock and time using GPSDO... " << std::flush; + _tree->access<std::string>(mb_path / "clock_source" / "value").set("gpsdo"); + _tree->access<std::string>(mb_path / "time_source" / "value").set("gpsdo"); + const time_t tp = time_t(mb.gps->get_sensor("gps_time").to_int() + 1); + _tree->access<time_spec_t>(mb_path / "time" / "pps").set(time_spec_t(tp)); + } else { + UHD_MSG(status) << "Initializing clock and time using internal sources... " << std::flush; + _tree->access<std::string>(mb_path / "clock_source" / "value").set("internal"); + _tree->access<std::string>(mb_path / "time_source" / "value").set("internal"); + } + UHD_MSG(status) << "done" << std::endl; //////////////////////////////////////////////////////////////////// // create frontend mapping @@ -811,25 +813,7 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr) _tree->access<subdev_spec_t>(mb_path / "rx_subdev_spec").set(rx_fe_spec); _tree->access<subdev_spec_t>(mb_path / "tx_subdev_spec").set(tx_fe_spec); - UHD_MSG(status) << "Initializing clock and PPS references..." << std::endl; - //Set to the GPSDO if installed - if (mb.gps and mb.gps->gps_detected()) - { - _tree->access<std::string>(mb_path / "clock_source" / "value").set("gpsdo"); - try { - wait_for_ref_locked(mb.zpu_ctrl, 1.0); - } catch (uhd::exception::runtime_error &e) { - UHD_MSG(warning) << "Clock reference failed to lock to GPSDO during device initialization. " << - "Check for the lock before operation or ignore this warning if using another clock source." << std::endl; - } - _tree->access<std::string>(mb_path / "time_source" / "value").set("gpsdo"); - UHD_MSG(status) << "References initialized to GPSDO sources" << std::endl; - UHD_MSG(status) << "Initializing time to the GPSDO time" << std::endl; - const time_t tp = time_t(mb.gps->get_sensor("gps_time").to_int()+1); - _tree->access<time_spec_t>(mb_path / "time" / "pps").set(time_spec_t(tp)); - } else { - UHD_MSG(status) << "References initialized to internal sources" << std::endl; - } + mb.initialization_done = true; } x300_impl::~x300_impl(void) @@ -917,14 +901,6 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name) perif.adc->set_test_word("normal", "normal"); //////////////////////////////////////////////////////////////// - // Sync DAC's for MIMO - //////////////////////////////////////////////////////////////// - UHD_MSG(status) << "Sync DAC's." << std::endl; - perif.dac->arm_dac_sync(); // Put DAC into data Sync mode - perif.ctrl->poke32(TOREG(SR_DACSYNC), 0x1); // Arm FRAMEP/N sync pulse - - - //////////////////////////////////////////////////////////////// // create codec control objects //////////////////////////////////////////////////////////////// _tree->create<int>(mb_path / "rx_codecs" / slot_name / "gains"); //phony property so this dir exists @@ -960,8 +936,6 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name) .subscribe(boost::bind(&tx_frontend_core_200::set_iq_balance, perif.tx_fe, _1)) .set(std::complex<double>(0.0, 0.0)); - - //////////////////////////////////////////////////////////////////// // create rx dsp control objects //////////////////////////////////////////////////////////////////// @@ -1200,10 +1174,10 @@ x300_impl::both_xports_t x300_impl::make_transport( << std::endl; } - size_t system_max_send_frame_size = (size_t) _max_frame_sizes.send_frame_size; - size_t system_max_recv_frame_size = (size_t) _max_frame_sizes.recv_frame_size; + size_t system_max_send_frame_size = (size_t) _max_frame_sizes.send_frame_size; + size_t system_max_recv_frame_size = (size_t) _max_frame_sizes.recv_frame_size; - // Make sure frame sizes do not exceed the max available value supported by UHD + // Make sure frame sizes do not exceed the max available value supported by UHD default_buff_args.send_frame_size = (prefix == X300_RADIO_DEST_PREFIX_TX) ? std::min(system_max_send_frame_size, X300_10GE_DATA_FRAME_MAX_SIZE) @@ -1346,11 +1320,9 @@ void x300_impl::register_loopback_self_test(wb_iface::sptr iface) UHD_MSG(status) << ((test_fail)? " fail" : "pass") << std::endl; } -void x300_impl::set_time_source_out(mboard_members_t &mb, const bool enb) -{ - mb.clock_control_regs_pps_out_enb = enb? 1 : 0; - this->update_clock_control(mb); -} +/*********************************************************************** + * clock and time control logic + **********************************************************************/ void x300_impl::update_clock_control(mboard_members_t &mb) { @@ -1363,79 +1335,71 @@ void x300_impl::update_clock_control(mboard_members_t &mb) mb.zpu_ctrl->poke32(SR_ADDR(SET0_BASE, ZPU_SR_CLOCK_CTRL), reg); } -void x300_impl::update_clock_source(mboard_members_t &mb, const std::string &source) +void x300_impl::initialize_clock_control(mboard_members_t &mb) { - mb.clock_control_regs_clock_source = 0; - mb.clock_control_regs_tcxo_enb = 0; - if (source == "internal") { - mb.clock_control_regs_clock_source = ZPU_SR_CLOCK_CTRL_CLK_SRC_INTERNAL; - mb.clock_control_regs_tcxo_enb = 1; - } else if (source == "external") { - mb.clock_control_regs_clock_source = ZPU_SR_CLOCK_CTRL_CLK_SRC_EXTERNAL; - } else if (source == "gpsdo") { - mb.clock_control_regs_clock_source = ZPU_SR_CLOCK_CTRL_CLK_SRC_GPSDO; - } else { - throw uhd::key_error("update_clock_source: unknown source: " + source); - } - + //Initialize clock control register soft copies + mb.clock_control_regs_clock_source = ZPU_SR_CLOCK_CTRL_CLK_SRC_INTERNAL; + mb.clock_control_regs_pps_select = ZPU_SR_CLOCK_CTRL_PPS_SRC_INTERNAL; + mb.clock_control_regs_pps_out_enb = 0; + mb.clock_control_regs_tcxo_enb = 1; + mb.clock_control_regs_gpsdo_pwr = 1; //GPSDO power always ON this->update_clock_control(mb); - - /* FIXME: implement when we know the correct timeouts - * //wait for lock - * double timeout = 1.0; - * try { - * if (mb.hw_rev > 4) - * wait_for_ref_locked(mb.zpu_ctrl, timeout); - * } catch (uhd::runtime_error &e) { - * //failed to lock on reference - * throw uhd::runtime_error((boost::format("Clock failed to lock to %s source.") % source).str()); - * } - */ } -void x300_impl::reset_clocks(mboard_members_t &mb) +void x300_impl::set_time_source_out(mboard_members_t &mb, const bool enb) { - mb.clock->reset_clocks(); - - if (mb.hw_rev > 4) - { - try { - wait_for_ref_locked(mb.zpu_ctrl, 30.0); - } catch (uhd::runtime_error &e) { - //failed to lock on reference - throw uhd::runtime_error((boost::format("PLL failed to lock to reference clock.")).str()); - } - } + mb.clock_control_regs_pps_out_enb = enb? 1 : 0; + this->update_clock_control(mb); } -void x300_impl::reset_radios(mboard_members_t &mb) +void x300_impl::update_clock_source(mboard_members_t &mb, const std::string &source) { - // reset ADCs and DACs - BOOST_FOREACH (radio_perifs_t& perif, mb.radio_perifs) - { - perif.adc->reset(); - perif.dac->reset(); - } + //Optimize for the case when the current source is internal and we are trying + //to set it to internal. This is the only case where we are guaranteed that + //the clock has not gone away so we can skip setting the MUX and reseting the LMK. + if (not (mb.current_refclk_src == "internal" and source == "internal")) { + //Update the clock MUX on the motherboard to select the requested source + mb.clock_control_regs_clock_source = 0; + mb.clock_control_regs_tcxo_enb = 0; + if (source == "internal") { + mb.clock_control_regs_clock_source = ZPU_SR_CLOCK_CTRL_CLK_SRC_INTERNAL; + mb.clock_control_regs_tcxo_enb = 1; + } else if (source == "external") { + mb.clock_control_regs_clock_source = ZPU_SR_CLOCK_CTRL_CLK_SRC_EXTERNAL; + } else if (source == "gpsdo") { + mb.clock_control_regs_clock_source = ZPU_SR_CLOCK_CTRL_CLK_SRC_GPSDO; + } else { + throw uhd::key_error("update_clock_source: unknown source: " + source); + } + this->update_clock_control(mb); - // check PLL locks - BOOST_FOREACH (radio_perifs_t& perif, mb.radio_perifs) - { - perif.dac->check_pll(); + //Reset the LMK to make sure it re-locks to the new reference + mb.clock->reset_clocks(); } - // Sync DACs - BOOST_FOREACH (radio_perifs_t& perif, mb.radio_perifs) - { - perif.dac->arm_dac_sync(); - } - BOOST_FOREACH (radio_perifs_t& perif, mb.radio_perifs) - { - perif.dac->check_dac_sync(); - // Arm FRAMEP/N sync pulse - // TODO: Investigate timing of the sync frame pulse. - perif.ctrl->poke32(TOREG(SR_DACSYNC), 0x1); - perif.dac->check_frontend_sync(); + //Wait for the LMK to lock (always, as a sanity check that the clock is useable) + //* Currently the LMK can take as long as 30 seconds to lock to a reference but we don't + //* want to wait that long during initialization. + //TODO: Need to verify timeout and settings to make sure lock can be achieved in < 1.0 seconds + double timeout = mb.initialization_done ? 30.0 : 1.0; + + //The programming code in x300_clock_ctrl is not compatible with revs <= 4 and may + //lead to locking issues. So, disable the ref-locked check for older (unsupported) boards. + if (mb.hw_rev > 4) { + if (not wait_for_ref_locked(mb.zpu_ctrl, timeout)) { + //failed to lock on reference + if (mb.initialization_done) { + throw uhd::runtime_error((boost::format("Reference Clock failed to lock to %s source.") % source).str()); + } else { + //TODO: Re-enable this warning when we figure out a reliable lock time + //UHD_MSG(warning) << "Reference clock failed to lock to " + source + " during device initialization. " << + // "Check for the lock before operation or ignore this warning if using another clock source." << std::endl; + } + } } + + //Update cache value + mb.current_refclk_src = source; } void x300_impl::update_time_source(mboard_members_t &mb, const std::string &source) @@ -1460,18 +1424,18 @@ void x300_impl::update_time_source(mboard_members_t &mb, const std::string &sour } } -void x300_impl::wait_for_ref_locked(wb_iface::sptr ctrl, double timeout) +bool x300_impl::wait_for_ref_locked(wb_iface::sptr ctrl, double timeout) { boost::system_time timeout_time = boost::get_system_time() + boost::posix_time::milliseconds(timeout * 1000.0); do { if (get_ref_locked(ctrl).to_bool()) - return; + return true; boost::this_thread::sleep(boost::posix_time::milliseconds(1)); } while (boost::get_system_time() < timeout_time); //failed to lock on reference - throw uhd::runtime_error("The reference clock failed to lock."); + return false; } sensor_value_t x300_impl::get_ref_locked(wb_iface::sptr ctrl) @@ -1496,6 +1460,67 @@ bool x300_impl::is_pps_present(wb_iface::sptr ctrl) return false; } +/*********************************************************************** + * reset and synchronization logic + **********************************************************************/ + +void x300_impl::reset_radios(mboard_members_t &mb) +{ + // Reset ADCs and DACs + BOOST_FOREACH (radio_perifs_t& perif, mb.radio_perifs) + { + perif.adc->reset(); + perif.dac->reset(); + } +} + +void x300_impl::synchronize_dacs(const std::vector<radio_perifs_t*>& radios) +{ + if (radios.size() < 2) return; //Nothing to synchronize + + //**PRECONDITION** + //This function assumes that all the VITA times in "radios" are synchronized + //to a common reference. Currently, this function is called in get_tx_stream + //which also has the same precondition. + + //Reinitialize and resync all DACs + for (size_t i = 0; i < radios.size(); i++) { + radios[i]->dac->reset_and_resync(); + } + + //Get a rough estimate of the cumulative command latency + boost::posix_time::ptime t_start = boost::posix_time::microsec_clock::local_time(); + for (size_t i = 0; i < radios.size(); i++) { + radios[i]->ctrl->peek64(RB64_TIME_NOW); //Discard value. We are just timing the call + } + boost::posix_time::time_duration t_elapsed = + boost::posix_time::microsec_clock::local_time() - t_start; + + //Add 100% of headroom + uncertaintly to the command time + boost::uint64_t t_sync_us = (t_elapsed.total_microseconds() * 2) + 13000 /*Scheduler latency*/; + + //Pick radios[0] as the time reference. + uhd::time_spec_t sync_time = + radios[0]->time64->get_time_now() + uhd::time_spec_t(((double)t_sync_us)/1e6); + + //Send the sync command + for (size_t i = 0; i < radios.size(); i++) { + radios[i]->ctrl->set_time(sync_time); + radios[i]->ctrl->poke32(TOREG(SR_DACSYNC), 0x1); //Arm FRAMEP/N sync pulse + radios[i]->ctrl->set_time(uhd::time_spec_t(0.0)); //Clear command time + } + + //Wait and check status + boost::this_thread::sleep(boost::posix_time::microseconds(t_sync_us)); + for (size_t i = 0; i < radios.size(); i++) { + radios[i]->dac->verify_sync(); + } +} + +/*********************************************************************** + * eeprom + **********************************************************************/ + void x300_impl::set_db_eeprom(i2c_iface::sptr i2c, const size_t addr, const uhd::usrp::dboard_eeprom_t &db_eeprom) { db_eeprom.store(*i2c, addr); @@ -1507,6 +1532,10 @@ void x300_impl::set_mb_eeprom(i2c_iface::sptr i2c, const mboard_eeprom_t &mb_eep mb_eeprom.commit(*eeprom16, "X300"); } +/*********************************************************************** + * front-panel GPIO + **********************************************************************/ + boost::uint32_t x300_impl::get_fp_gpio(gpio_core_200::sptr gpio, const std::string &) { return boost::uint32_t(gpio->read_gpio(dboard_iface::UNIT_RX)); diff --git a/host/lib/usrp/x300/x300_impl.hpp b/host/lib/usrp/x300/x300_impl.hpp index 924cb61a4..70c5dccb4 100644 --- a/host/lib/usrp/x300/x300_impl.hpp +++ b/host/lib/usrp/x300/x300_impl.hpp @@ -194,6 +194,7 @@ private: uhd::dict<size_t, boost::weak_ptr<uhd::rx_streamer> > rx_streamers; uhd::dict<size_t, boost::weak_ptr<uhd::tx_streamer> > tx_streamers; + bool initialization_done; uhd::task::sptr claimer_task; std::string addr; std::string xport_path; @@ -233,6 +234,7 @@ private: std::string loaded_fpga_image; size_t hw_rev; + std::string current_refclk_src; }; std::vector<mboard_members_t> _mb; @@ -341,14 +343,14 @@ private: void update_tx_samp_rate(mboard_members_t&, const size_t, const double); void update_clock_control(mboard_members_t&); + void initialize_clock_control(mboard_members_t &mb); void set_time_source_out(mboard_members_t&, const bool); void update_clock_source(mboard_members_t&, const std::string &); void update_time_source(mboard_members_t&, const std::string &); - void reset_clocks(mboard_members_t&); void reset_radios(mboard_members_t&); uhd::sensor_value_t get_ref_locked(uhd::wb_iface::sptr); - void wait_for_ref_locked(uhd::wb_iface::sptr, double timeout = 0.0); + bool wait_for_ref_locked(uhd::wb_iface::sptr, double timeout = 0.0); bool is_pps_present(uhd::wb_iface::sptr); void set_db_eeprom(uhd::i2c_iface::sptr i2c, const size_t, const uhd::usrp::dboard_eeprom_t &); @@ -360,6 +362,12 @@ private: void update_atr_leds(gpio_core_200_32wo::sptr, const std::string &ant); boost::uint32_t get_fp_gpio(gpio_core_200::sptr, const std::string &); void set_fp_gpio(gpio_core_200::sptr, const std::string &, const boost::uint32_t); + + //**PRECONDITION** + //This function assumes that all the VITA times in "radios" are synchronized + //to a common reference. Currently, this function is called in get_tx_stream + //which also has the same precondition. + static void synchronize_dacs(const std::vector<radio_perifs_t*>& mboards); }; #endif /* INCLUDED_X300_IMPL_HPP */ diff --git a/host/lib/usrp/x300/x300_io_impl.cpp b/host/lib/usrp/x300/x300_io_impl.cpp index c5b8f49e3..04042049d 100644 --- a/host/lib/usrp/x300/x300_io_impl.cpp +++ b/host/lib/usrp/x300/x300_io_impl.cpp @@ -540,6 +540,7 @@ tx_streamer::sptr x300_impl::get_tx_stream(const uhd::stream_args_t &args_) //shared async queue for all channels in streamer boost::shared_ptr<async_md_type> async_md(new async_md_type(1000/*messages deep*/)); + std::vector<radio_perifs_t*> radios_list; boost::shared_ptr<sph::send_packet_streamer> my_streamer; for (size_t stream_i = 0; stream_i < args.channels.size(); stream_i++) { @@ -557,9 +558,10 @@ tx_streamer::sptr x300_impl::get_tx_stream(const uhd::stream_args_t &args_) } // Find the DSP that corresponds to this mainboard and subdev mboard_members_t &mb = _mb[mb_index]; - const size_t radio_index = _tree->access<std::vector<size_t> >("/mboards/" + boost::lexical_cast<std::string>(mb_index) / "tx_chan_dsp_mapping") + const size_t radio_index = _tree->access<std::vector<size_t> >("/mboards/" + boost::lexical_cast<std::string>(mb_index) / "tx_chan_dsp_mapping") .get().at(mb_chan); radio_perifs_t &perif = mb.radio_perifs[radio_index]; + radios_list.push_back(&perif); //setup the dsp transport hints (TODO) device_addr_t device_addr = mb.send_args; @@ -571,8 +573,8 @@ tx_streamer::sptr x300_impl::get_tx_stream(const uhd::stream_args_t &args_) both_xports_t xport = this->make_transport(mb_index, dest, X300_RADIO_DEST_PREFIX_TX, device_addr, data_sid); UHD_LOG << boost::format("data_sid = 0x%08x\n") % data_sid << std::endl; - // To calculate the max number of samples per packet, we assume the maximum header length - // to avoid fragmentation should the entire header be used. + // To calculate the max number of samples per packet, we assume the maximum header length + // to avoid fragmentation should the entire header be used. const size_t bpp = xport.send->get_send_frame_size() - X300_TX_MAX_HDR_LEN; const size_t bpi = convert::get_bytes_per_item(args.otw_format); const size_t spp = unsigned(args.args.cast<double>("spp", bpp/bpi)); @@ -640,5 +642,6 @@ tx_streamer::sptr x300_impl::get_tx_stream(const uhd::stream_args_t &args_) _tree->access<double>(mb_path / "tx_dsps" / boost::lexical_cast<std::string>(radio_index) / "rate" / "value").update(); } + synchronize_dacs(radios_list); return my_streamer; } |