diff options
Diffstat (limited to 'host/lib/usrp')
| -rw-r--r-- | host/lib/usrp/dboard/db_xcvr2450.cpp | 42 |
1 files changed, 24 insertions, 18 deletions
diff --git a/host/lib/usrp/dboard/db_xcvr2450.cpp b/host/lib/usrp/dboard/db_xcvr2450.cpp index fbce4b932..f69d88dca 100644 --- a/host/lib/usrp/dboard/db_xcvr2450.cpp +++ b/host/lib/usrp/dboard/db_xcvr2450.cpp @@ -35,15 +35,15 @@ // RX IO Pins #define LOCKDET_RXIO (1 << 15) // This is an INPUT!!! -#define EN_RXIO (1 << 14) +#define POWER_RXIO (1 << 14) // 1 = power on, 0 = shutdown #define RX_EN_RXIO (1 << 13) // 1 = RX on, 0 = RX off #define RX_HP_RXIO (1 << 12) // 0 = Fc set by rx_hpf, 1 = 600 KHz -#define RXIO_MASK (EN_RXIO | RX_EN_RXIO | RX_HP_RXIO) +#define RXIO_MASK (POWER_RXIO | RX_EN_RXIO | RX_HP_RXIO) // RX IO Functions -#define ALL_ENB_RXIO EN_RXIO -#define ALL_DIS_RXIO 0 +#define POWER_UP_RXIO POWER_RXIO +#define POWER_DOWN_RXIO 0 #define RX_ENB_RXIO RX_EN_RXIO #define RX_DIS_RXIO 0 @@ -187,7 +187,7 @@ xcvr2450::~xcvr2450(void){ void xcvr2450::spi_reset(void){ //spi reset mode: global enable = off, tx and rx enable = on this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, TX_ENB_TXIO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, RX_ENB_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, RX_ENB_RXIO | POWER_DOWN_RXIO); } void xcvr2450::update_atr(void){ @@ -205,24 +205,27 @@ void xcvr2450::update_atr(void){ this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, band_sel | ad9515div | TX_ENB_TXIO | xx_ant_sel); //set the rx registers - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, ALL_ENB_RXIO | RX_DIS_RXIO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, ALL_ENB_RXIO | RX_ENB_RXIO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, ALL_ENB_RXIO | RX_DIS_RXIO); - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, ALL_ENB_RXIO | RX_ENB_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, POWER_UP_RXIO | RX_DIS_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, POWER_UP_RXIO | RX_ENB_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, POWER_UP_RXIO | RX_DIS_RXIO); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, POWER_UP_RXIO | RX_ENB_RXIO); } /*********************************************************************** * Tuning **********************************************************************/ void xcvr2450::set_lo_freq(double target_freq){ + target_freq = std::clip(target_freq, xcvr_freq_range.min, xcvr_freq_range.max); + //TODO: clip for highband and lowband + //variables used in the calculation below - double scaler = (_lo_freq > 3e9)? (4.0/5.0) : (4.0/3.0); + double scaler = (target_freq > 3e9)? (4.0/5.0) : (4.0/3.0); double ref_freq = this->get_iface()->get_clock_rate(dboard_iface::UNIT_TX); int R, intdiv, fracdiv; //loop through values until we get a match - for(R = 1; R <= 7; R++){ - for(_ad9515div = 2; _ad9515div <= 3; _ad9515div++){ + for(_ad9515div = 2; _ad9515div <= 3; _ad9515div++){ + for(R = 1; R <= 7; R++){ double N = (target_freq*scaler*R*_ad9515div)/ref_freq; intdiv = int(std::floor(N)); fracdiv = (N - intdiv)*double(1 << 16); @@ -235,12 +238,15 @@ void xcvr2450::set_lo_freq(double target_freq){ //calculate the actual freq from the values above double N = double(intdiv) + double(fracdiv)/double(1 << 16); - _lo_freq = (scaler*R*_ad9515div)/(N*ref_freq); - - if (xcvr2450_debug) std::cerr << boost::format( - "XCVR2450 tune: R=%d, N=%f, ad9515=%d, scaler=%f\n" - " Target Freq=%fMHz, Actual Freq=%fMHz" - ) % R % N % _ad9515div % scaler % (target_freq/1e6) % (_lo_freq/1e6) << std::endl; + _lo_freq = (N*ref_freq)/(scaler*R*_ad9515div); + + if (xcvr2450_debug) std::cerr + << boost::format("XCVR2450 tune:\n") + << boost::format(" R=%d, N=%f, ad9515=%d, scaler=%f\n") % R % N % _ad9515div % scaler + << boost::format(" Ref Freq=%fMHz\n") % (ref_freq/1e6) + << boost::format(" Target Freq=%fMHz\n") % (target_freq/1e6) + << boost::format(" Actual Freq=%fMHz\n") % (_lo_freq/1e6) + << std::endl; //high-high band or low-high band? if(_lo_freq > (5.35e9 + 4.47e9)/2.0){ |