diff options
Diffstat (limited to 'host/lib/usrp2/fw_common.h')
| -rw-r--r-- | host/lib/usrp2/fw_common.h | 154 |
1 files changed, 0 insertions, 154 deletions
diff --git a/host/lib/usrp2/fw_common.h b/host/lib/usrp2/fw_common.h deleted file mode 100644 index 21abc6aed..000000000 --- a/host/lib/usrp2/fw_common.h +++ /dev/null @@ -1,154 +0,0 @@ -// -// Copyright 2010-2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#ifndef INCLUDED_USRP2_FW_COMMON_H -#define INCLUDED_USRP2_FW_COMMON_H - -#include <stdint.h> - -/*! - * Structs and constants for usrp2 communication. - * This header is shared by the firmware and host code. - * Therefore, this header may only contain valid C code. - */ -#ifdef __cplusplus -extern "C" { -#endif - -//fpga and firmware compatibility numbers -#define USRP2_FPGA_COMPAT_NUM 7 -#define USRP2_FW_COMPAT_NUM 10 - -//used to differentiate control packets over data port -#define USRP2_INVALID_VRT_HEADER 0 - -// udp ports for the usrp2 communication -// Dynamic and/or private ports: 49152-65535 -#define USRP2_UDP_CTRL_PORT 49152 -//#define USRP2_UDP_UPDATE_PORT 49154 -#define USRP2_UDP_DSP0_PORT 49156 -#define USRP2_UDP_ERR0_PORT 49157 -#define USRP2_UDP_DSP1_PORT 49158 - -//////////////////////////////////////////////////////////////////////// -// I2C addresses -//////////////////////////////////////////////////////////////////////// -#define USRP2_I2C_DEV_EEPROM 0x50 // 24LC02[45]: 7-bits 1010xxx -#define USRP2_I2C_ADDR_MBOARD (USRP2_I2C_DEV_EEPROM | 0x0) -#define USRP2_I2C_ADDR_TX_DB (USRP2_I2C_DEV_EEPROM | 0x4) -#define USRP2_I2C_ADDR_RX_DB (USRP2_I2C_DEV_EEPROM | 0x5) - -//////////////////////////////////////////////////////////////////////// -// EEPROM Layout -//////////////////////////////////////////////////////////////////////// -#define USRP2_EE_MBOARD_REV 0x00 //2 bytes, little-endian (historic, don't blame me) -#define USRP2_EE_MBOARD_MAC_ADDR 0x02 //6 bytes -#define USRP2_EE_MBOARD_IP_ADDR 0x0C //uint32, big-endian -#define USRP2_EE_MBOARD_BOOTLOADER_FLAGS 0xF7 - -typedef enum{ - USRP2_CTRL_ID_HUH_WHAT = ' ', - //USRP2_CTRL_ID_FOR_SURE, //TODO error condition enums - //USRP2_CTRL_ID_SUX_MAN, - - USRP2_CTRL_ID_WAZZUP_BRO = 'a', - USRP2_CTRL_ID_WAZZUP_DUDE = 'A', - - USRP2_CTRL_ID_TRANSACT_ME_SOME_SPI_BRO = 's', - USRP2_CTRL_ID_OMG_TRANSACTED_SPI_DUDE = 'S', - - USRP2_CTRL_ID_DO_AN_I2C_READ_FOR_ME_BRO = 'i', - USRP2_CTRL_ID_HERES_THE_I2C_DATA_DUDE = 'I', - - USRP2_CTRL_ID_WRITE_THESE_I2C_VALUES_BRO = 'h', - USRP2_CTRL_ID_COOL_IM_DONE_I2C_WRITE_DUDE = 'H', - - USRP2_CTRL_ID_GET_THIS_REGISTER_FOR_ME_BRO = 'r', - USRP2_CTRL_ID_OMG_GOT_REGISTER_SO_BAD_DUDE = 'R', - - USRP2_CTRL_ID_HEY_WRITE_THIS_UART_FOR_ME_BRO = 'u', - USRP2_CTRL_ID_MAN_I_TOTALLY_WROTE_THAT_UART_DUDE = 'U', - - USRP2_CTRL_ID_SO_LIKE_CAN_YOU_READ_THIS_UART_BRO = 'v', - USRP2_CTRL_ID_I_HELLA_READ_THAT_UART_DUDE = 'V', - - USRP2_CTRL_ID_HOLLER_AT_ME_BRO = 'l', - USRP2_CTRL_ID_HOLLER_BACK_DUDE = 'L', - - USRP2_CTRL_ID_PEACE_OUT = '~' - -} usrp2_ctrl_id_t; - -typedef enum{ - USRP2_DIR_RX = 'r', - USRP2_DIR_TX = 't' -} usrp2_dir_which_t; - -typedef enum{ - USRP2_CLK_EDGE_RISE = 'r', - USRP2_CLK_EDGE_FALL = 'f' -} usrp2_clk_edge_t; - -typedef enum{ - USRP2_REG_ACTION_FPGA_PEEK32 = 1, - USRP2_REG_ACTION_FPGA_PEEK16 = 2, - USRP2_REG_ACTION_FPGA_POKE32 = 3, - USRP2_REG_ACTION_FPGA_POKE16 = 4, - USRP2_REG_ACTION_FW_PEEK32 = 5, - USRP2_REG_ACTION_FW_POKE32 = 6 -} usrp2_reg_action_t; - -typedef struct{ - uint32_t proto_ver; - uint32_t id; - uint32_t seq; - union{ - uint32_t ip_addr; - struct { - uint32_t dev; - uint32_t data; - uint8_t miso_edge; - uint8_t mosi_edge; - uint8_t num_bits; - uint8_t readback; - } spi_args; - struct { - uint8_t addr; - uint8_t bytes; - uint8_t data[20]; - } i2c_args; - struct { - uint32_t addr; - uint32_t data; - uint8_t action; - } reg_args; - struct { - uint8_t dev; - uint8_t bytes; - uint8_t data[20]; - } uart_args; - struct { - uint32_t len; - } echo_args; - } data; -} usrp2_ctrl_data_t; - -#ifdef __cplusplus -} -#endif - -#endif /* INCLUDED_USRP2_FW_COMMON_H */ |