diff options
Diffstat (limited to 'host/lib/usrp/x300/x300_regs.hpp')
-rw-r--r-- | host/lib/usrp/x300/x300_regs.hpp | 140 |
1 files changed, 73 insertions, 67 deletions
diff --git a/host/lib/usrp/x300/x300_regs.hpp b/host/lib/usrp/x300/x300_regs.hpp index f920b5ae2..68f438b7f 100644 --- a/host/lib/usrp/x300/x300_regs.hpp +++ b/host/lib/usrp/x300/x300_regs.hpp @@ -25,40 +25,40 @@ #define localparam static const int -localparam SR_DACSYNC = 5; -localparam SR_LOOPBACK = 6; -localparam SR_TEST = 7; -localparam SR_SPI = 8; -localparam SR_GPIO = 16; -localparam SR_MISC_OUTS = 24; -localparam SR_READBACK = 32; -localparam SR_TX_CTRL = 64; -localparam SR_RX_CTRL = 96; -localparam SR_TIME = 128; -localparam SR_RX_DSP = 144; -localparam SR_TX_DSP = 184; -localparam SR_LEDS = 195; -localparam SR_FP_GPIO = 200; -localparam SR_RX_FRONT = 208; -localparam SR_TX_FRONT = 216; - -localparam RB32_GPIO = 0; -localparam RB32_SPI = 4; -localparam RB64_TIME_NOW = 8; -localparam RB64_TIME_PPS = 16; -localparam RB32_TEST = 24; -localparam RB32_RX = 28; -localparam RB32_FP_GPIO = 32; - -localparam BL_ADDRESS = 0; -localparam BL_DATA = 1; +localparam SR_DACSYNC = 5; +localparam SR_LOOPBACK = 6; +localparam SR_TEST = 7; +localparam SR_SPI = 8; +localparam SR_GPIO = 16; +localparam SR_MISC_OUTS = 24; +localparam SR_READBACK = 32; +localparam SR_TX_CTRL = 64; +localparam SR_RX_CTRL = 96; +localparam SR_TIME = 128; +localparam SR_RX_DSP = 144; +localparam SR_TX_DSP = 184; +localparam SR_LEDS = 196; +localparam SR_FP_GPIO = 200; +localparam SR_RX_FRONT = 208; +localparam SR_TX_FRONT = 216; + +localparam RB32_GPIO = 0; +localparam RB32_SPI = 4; +localparam RB64_TIME_NOW = 8; +localparam RB64_TIME_PPS = 16; +localparam RB32_TEST = 24; +localparam RB32_RX = 28; +localparam RB32_FP_GPIO = 32; + +localparam BL_ADDRESS = 0; +localparam BL_DATA = 1; //wishbone settings map - relevant to host code -#define SET0_BASE 0xa000 -#define SETXB_BASE 0xb000 -#define BOOT_LDR_BASE 0xFA00 -#define I2C0_BASE 0xfe00 -#define I2C1_BASE 0xff00 +#define SET0_BASE 0xa000 +#define SETXB_BASE 0xb000 +#define BOOT_LDR_BASE 0xfa00 +#define I2C0_BASE 0xfe00 +#define I2C1_BASE 0xff00 #define SR_ADDR(base, offset) ((base) + (offset)*4) localparam ZPU_SR_LEDS = 00; @@ -70,56 +70,62 @@ localparam ZPU_SR_ETHINT0 = 40; localparam ZPU_SR_ETHINT1 = 56; //clock controls -#define ZPU_SR_CLOCK_CTRL_CLK_SRC_EXTERNAL 0x00 -#define ZPU_SR_CLOCK_CTRL_CLK_SRC_INTERNAL 0x02 -#define ZPU_SR_CLOCK_CTRL_CLK_SRC_GPSDO 0x03 -#define ZPU_SR_CLOCK_CTRL_PPS_SRC_EXTERNAL 0x00 -#define ZPU_SR_CLOCK_CTRL_PPS_SRC_INTERNAL 0x02 -#define ZPU_SR_CLOCK_CTRL_PPS_SRC_GPSDO 0x03 - -localparam ZPU_RB_SPI = 2; +#define ZPU_SR_CLOCK_CTRL_CLK_SRC_EXTERNAL 0x00 +#define ZPU_SR_CLOCK_CTRL_CLK_SRC_INTERNAL 0x02 +#define ZPU_SR_CLOCK_CTRL_CLK_SRC_GPSDO 0x03 +#define ZPU_SR_CLOCK_CTRL_PPS_SRC_EXTERNAL 0x00 +#define ZPU_SR_CLOCK_CTRL_PPS_SRC_INTERNAL 0x02 +#define ZPU_SR_CLOCK_CTRL_PPS_SRC_GPSDO 0x03 + +localparam ZPU_RB_SPI = 2; localparam ZPU_RB_CLK_STATUS = 3; localparam ZPU_RB_COMPAT_NUM = 6; localparam ZPU_RB_ETH_TYPE0 = 4; localparam ZPU_RB_ETH_TYPE1 = 5; //clock status -#define ZPU_RB_CLK_STATUS_LMK_STATUS (0x3 << 0) -#define ZPU_RB_CLK_STATUS_LMK_LOCK (0x1 << 2) -#define ZPU_RB_CLK_STATUS_LMK_HOLDOVER (0x1 << 3) -#define ZPU_RB_CLK_STATUS_PPS_DETECT (0x1 << 4) +#define ZPU_RB_CLK_STATUS_LMK_STATUS (0x3 << 0) +#define ZPU_RB_CLK_STATUS_LMK_LOCK (0x1 << 2) +#define ZPU_RB_CLK_STATUS_LMK_HOLDOVER (0x1 << 3) +#define ZPU_RB_CLK_STATUS_PPS_DETECT (0x1 << 4) //spi slaves on radio -#define DB_DAC_SEN (1 << 7) -#define DB_ADC_SEN (1 << 6) +#define DB_DAC_SEN (1 << 7) +#define DB_ADC_SEN (1 << 6) #define DB_RX_LSADC_SEN (1 << 5) #define DB_RX_LSDAC_SEN (1 << 4) #define DB_TX_LSADC_SEN (1 << 3) #define DB_TX_LSDAC_SEN (1 << 2) -#define DB_RX_SEN (1 << 1) -#define DB_TX_SEN (1 << 0) +#define DB_RX_SEN (1 << 1) +#define DB_TX_SEN (1 << 0) //------------------------------------------------------------------- // PCIe Registers //------------------------------------------------------------------- -static const uint32_t X300_PCIE_VID = 0x1093; -static const uint32_t X300_PCIE_PID = 0xC4C4; -static const uint32_t X300_USRP_PCIE_SSID = 0x7736; -static const uint32_t X310_USRP_PCIE_SSID = 0x76CA; -static const uint32_t X310_2940R_PCIE_SSID = 0x772B; -static const uint32_t X310_2942R_PCIE_SSID = 0x772C; -static const uint32_t X310_2943R_PCIE_SSID = 0x772D; -static const uint32_t X310_2944R_PCIE_SSID = 0x772E; -static const uint32_t X310_2950R_PCIE_SSID = 0x772F; -static const uint32_t X310_2952R_PCIE_SSID = 0x7730; -static const uint32_t X310_2953R_PCIE_SSID = 0x7731; -static const uint32_t X310_2954R_PCIE_SSID = 0x7732; +static const uint32_t X300_PCIE_VID = 0x1093; +static const uint32_t X300_PCIE_PID = 0xC4C4; +static const uint32_t X300_USRP_PCIE_SSID = 0x7736; +static const uint32_t X310_USRP_PCIE_SSID = 0x76CA; +static const uint32_t X310_2940R_40MHz_PCIE_SSID = 0x772B; +static const uint32_t X310_2940R_120MHz_PCIE_SSID = 0x77FB; +static const uint32_t X310_2942R_40MHz_PCIE_SSID = 0x772C; +static const uint32_t X310_2942R_120MHz_PCIE_SSID = 0x77FC; +static const uint32_t X310_2943R_40MHz_PCIE_SSID = 0x772D; +static const uint32_t X310_2943R_120MHz_PCIE_SSID = 0x77FD; +static const uint32_t X310_2944R_40MHz_PCIE_SSID = 0x772E; +static const uint32_t X310_2950R_40MHz_PCIE_SSID = 0x772F; +static const uint32_t X310_2950R_120MHz_PCIE_SSID = 0x77FE; +static const uint32_t X310_2952R_40MHz_PCIE_SSID = 0x7730; +static const uint32_t X310_2952R_120MHz_PCIE_SSID = 0x77FF; +static const uint32_t X310_2953R_40MHz_PCIE_SSID = 0x7731; +static const uint32_t X310_2953R_120MHz_PCIE_SSID = 0x7800; +static const uint32_t X310_2954R_40MHz_PCIE_SSID = 0x7732; static const uint32_t FPGA_X3xx_SIG_VALUE = 0x58333030; static const uint32_t PCIE_FPGA_ADDR_BASE = 0xC0000; -#define PCIE_FPGA_REG(X) (PCIE_FPGA_ADDR_BASE + X) +#define PCIE_FPGA_REG(X) (PCIE_FPGA_ADDR_BASE + (X)) static const uint32_t FPGA_PCIE_SIG_REG = PCIE_FPGA_REG(0x0000); static const uint32_t FPGA_CNTR_LO_REG = PCIE_FPGA_REG(0x0004); @@ -140,8 +146,8 @@ static const uint32_t DMA_FRAME_SIZE_REG = 0x4; static const uint32_t DMA_SAMPLE_COUNT_REG = 0x8; static const uint32_t DMA_PKT_COUNT_REG = 0xC; -#define PCIE_TX_DMA_REG(REG, CHAN) (PCIE_TX_DMA_REG_BASE + (CHAN*DMA_REG_GRP_SIZE) + REG) -#define PCIE_RX_DMA_REG(REG, CHAN) (PCIE_RX_DMA_REG_BASE + (CHAN*DMA_REG_GRP_SIZE) + REG) +#define PCIE_TX_DMA_REG(REG, CHAN) (PCIE_TX_DMA_REG_BASE + ((CHAN)*DMA_REG_GRP_SIZE) + (REG)) +#define PCIE_RX_DMA_REG(REG, CHAN) (PCIE_RX_DMA_REG_BASE + ((CHAN)*DMA_REG_GRP_SIZE) + (REG)) static const uint32_t DMA_CTRL_DISABLED = 0x00000000; static const uint32_t DMA_CTRL_ENABLED = 0x00000002; @@ -154,15 +160,15 @@ static const uint32_t DMA_STATUS_ERROR = 0x00000001; static const uint32_t DMA_STATUS_BUSY = 0x00000002; static const uint32_t PCIE_ROUTER_REG_BASE = PCIE_FPGA_REG(0x0500); -#define PCIE_ROUTER_REG(X) (PCIE_ROUTER_REG_BASE + X) +#define PCIE_ROUTER_REG(X) (PCIE_ROUTER_REG_BASE + (X)) static const uint32_t PCIE_ZPU_DATA_BASE = 0x30000; static const uint32_t PCIE_ZPU_READ_BASE = 0x20000; //Trig and Status share the same base static const uint32_t PCIE_ZPU_STATUS_BASE = 0x20000; -#define PCIE_ZPU_DATA_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_DATA_BASE) + X) -#define PCIE_ZPU_READ_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_READ_BASE) + X) -#define PCIE_ZPU_STATUS_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_STATUS_BASE) + X) +#define PCIE_ZPU_DATA_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_DATA_BASE) + (X)) +#define PCIE_ZPU_READ_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_READ_BASE) + (X)) +#define PCIE_ZPU_STATUS_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_STATUS_BASE) + (X)) static const uint32_t PCIE_ZPU_READ_START = 0x0; static const uint32_t PCIE_ZPU_READ_CLOBBER = 0x80000000; |