diff options
Diffstat (limited to 'host/lib/usrp/usrp2')
| -rw-r--r-- | host/lib/usrp/usrp2/fw_common.h | 4 | ||||
| -rw-r--r-- | host/lib/usrp/usrp2/io_impl.cpp | 169 | ||||
| -rw-r--r-- | host/lib/usrp/usrp2/mboard_impl.cpp | 40 | ||||
| -rw-r--r-- | host/lib/usrp/usrp2/usrp2_iface.cpp | 14 | ||||
| -rw-r--r-- | host/lib/usrp/usrp2/usrp2_impl.cpp | 18 | ||||
| -rw-r--r-- | host/lib/usrp/usrp2/usrp2_impl.hpp | 16 | ||||
| -rw-r--r-- | host/lib/usrp/usrp2/usrp2_regs.hpp | 5 |
7 files changed, 194 insertions, 72 deletions
diff --git a/host/lib/usrp/usrp2/fw_common.h b/host/lib/usrp/usrp2/fw_common.h index e812e1221..2cd3ee595 100644 --- a/host/lib/usrp/usrp2/fw_common.h +++ b/host/lib/usrp/usrp2/fw_common.h @@ -33,8 +33,8 @@ extern "C" { #endif //fpga and firmware compatibility numbers -#define USRP2_FPGA_COMPAT_NUM 2 -#define USRP2_FW_COMPAT_NUM 6 +#define USRP2_FPGA_COMPAT_NUM 3 +#define USRP2_FW_COMPAT_NUM 7 //used to differentiate control packets over data port #define USRP2_INVALID_VRT_HEADER 0 diff --git a/host/lib/usrp/usrp2/io_impl.cpp b/host/lib/usrp/usrp2/io_impl.cpp index 83b70bddc..39e6c167f 100644 --- a/host/lib/usrp/usrp2/io_impl.cpp +++ b/host/lib/usrp/usrp2/io_impl.cpp @@ -18,11 +18,11 @@ #include "../../transport/vrt_packet_handler.hpp" #include "usrp2_impl.hpp" #include "usrp2_regs.hpp" +#include <uhd/utils/byteswap.hpp> #include <uhd/utils/thread_priority.hpp> #include <uhd/transport/convert_types.hpp> #include <uhd/transport/alignment_buffer.hpp> #include <boost/format.hpp> -#include <boost/asio.hpp> //htonl and ntohl #include <boost/bind.hpp> #include <boost/thread.hpp> #include <iostream> @@ -32,7 +32,73 @@ using namespace uhd::usrp; using namespace uhd::transport; namespace asio = boost::asio; -static const int underflow_flags = async_metadata_t::EVENT_CODE_UNDERFLOW | async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET; +/*********************************************************************** + * constants + **********************************************************************/ +static const int underflow_flags = 0 + | async_metadata_t::EVENT_CODE_UNDERFLOW + | async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET +; + +static const size_t vrt_send_header_offset_words32 = 1; + +/*********************************************************************** + * flow control monitor for a single tx channel + * - the pirate thread calls update + * - the get send buffer calls check + **********************************************************************/ +class flow_control_monitor{ +public: + typedef boost::uint32_t seq_type; + typedef boost::shared_ptr<flow_control_monitor> sptr; + + /*! + * Make a new flow control monitor. + * \param max_seqs_out num seqs before throttling + */ + flow_control_monitor(seq_type max_seqs_out){ + _last_seq_out = 0; + _last_seq_ack = 0; + _max_seqs_out = max_seqs_out; + } + + /*! + * Check the flow control condition. + * \param seq the sequence to go out + * \param timeout the timeout in seconds + * \return false on timeout + */ + UHD_INLINE bool check_fc_condition(seq_type seq, double timeout){ + boost::this_thread::disable_interruption di; //disable because the wait can throw + boost::unique_lock<boost::mutex> lock(_fc_mutex); + _last_seq_out = seq; + return _fc_cond.timed_wait( + lock, + boost::posix_time::microseconds(long(timeout*1e6)), + boost::bind(&flow_control_monitor::ready, this) + ); + } + + /*! + * Update the flow control condition. + * \param seq the last sequence number to be ACK'd + */ + UHD_INLINE void update_fc_condition(seq_type seq){ + boost::unique_lock<boost::mutex> lock(_fc_mutex); + _last_seq_ack = seq; + lock.unlock(); + _fc_cond.notify_one(); + } + +private: + bool ready(void){ + return seq_type(_last_seq_out -_last_seq_ack) < _max_seqs_out; + } + + boost::mutex _fc_mutex; + boost::condition _fc_cond; + seq_type _last_seq_out, _last_seq_ack, _max_seqs_out; +}; /*********************************************************************** * io impl details (internal to this file) @@ -44,12 +110,14 @@ static const int underflow_flags = async_metadata_t::EVENT_CODE_UNDERFLOW | asyn struct usrp2_impl::io_impl{ typedef alignment_buffer<managed_recv_buffer::sptr, time_spec_t> alignment_buffer_type; - io_impl(size_t num_frames, size_t width): + io_impl(size_t num_recv_frames, size_t send_frame_size, size_t width): packet_handler_recv_state(width), - recv_pirate_booty(alignment_buffer_type::make(num_frames-3, width)), + recv_pirate_booty(alignment_buffer_type::make(num_recv_frames-3, width)), async_msg_fifo(bounded_buffer<async_metadata_t>::make(100/*messages deep*/)) { - /* NOP */ + for (size_t i = 0; i < width; i++) fc_mons.push_back( + flow_control_monitor::sptr(new flow_control_monitor(usrp2_impl::sram_bytes/send_frame_size)) + ); } ~io_impl(void){ @@ -63,6 +131,29 @@ struct usrp2_impl::io_impl{ return recv_pirate_booty->pop_elems_with_timed_wait(buffs, timeout); } + bool get_send_buffs( + const std::vector<zero_copy_if::sptr> &trans, + vrt_packet_handler::managed_send_buffs_t &buffs, + double timeout + ){ + UHD_ASSERT_THROW(trans.size() == buffs.size()); + + //calculate the flow control word + const boost::uint32_t fc_word32 = packet_handler_send_state.next_packet_seq; + + //grab a managed buffer for each index + for (size_t i = 0; i < buffs.size(); i++){ + if (not fc_mons[i]->check_fc_condition(fc_word32, timeout)) return false; + buffs[i] = trans[i]->get_send_buff(timeout); + if (not buffs[i].get()) return false; + buffs[i]->cast<boost::uint32_t *>()[0] = uhd::htonx(fc_word32); + } + return true; + } + + //flow control monitors + std::vector<flow_control_monitor::sptr> fc_mons; + //state management for the vrt packet handler code vrt_packet_handler::recv_state packet_handler_recv_state; vrt_packet_handler::send_state packet_handler_send_state; @@ -112,8 +203,16 @@ void usrp2_impl::io_impl::recv_pirate_loop( ); metadata.event_code = vrt_packet_handler::get_context_code<async_metadata_t::event_code_t>(vrt_hdr, if_packet_info); + //catch the flow control packets and react + if (metadata.event_code == 0){ + boost::uint32_t fc_word32 = (vrt_hdr + if_packet_info.num_header_words32)[1]; + this->fc_mons[index]->update_fc_condition(uhd::ntohx(fc_word32)); + continue; + } + //print the famous U, and push the metadata into the message queue if (metadata.event_code & underflow_flags) std::cerr << "U" << std::flush; + //else std::cout << "metadata.event_code " << metadata.event_code << std::endl; async_msg_fifo->push_with_pop_on_full(metadata); continue; } @@ -142,23 +241,39 @@ void usrp2_impl::io_impl::recv_pirate_loop( /*********************************************************************** * Helper Functions **********************************************************************/ +#include <uhd/usrp/mboard_props.hpp> //TODO remove when hack below is fixed + void usrp2_impl::io_init(void){ - //send a small data packet so the usrp2 knows the udp source port - BOOST_FOREACH(zero_copy_if::sptr data_transport, _data_transports){ - managed_send_buffer::sptr send_buff = data_transport->get_send_buff(); - static const boost::uint32_t data = htonl(USRP2_INVALID_VRT_HEADER); - std::memcpy(send_buff->cast<void*>(), &data, sizeof(data)); - send_buff->commit(sizeof(data)); - //drain the recv buffers (may have junk) - while (data_transport->get_recv_buff().get()){}; - } - //the number of recv frames is the number for the first transport //the assumption is that all data transports should be identical - size_t num_frames = _data_transports.front()->get_num_recv_frames(); + const size_t num_recv_frames = _data_transports.front()->get_num_recv_frames(); + const size_t send_frame_size = _data_transports.front()->get_send_frame_size(); //create new io impl - _io_impl = UHD_PIMPL_MAKE(io_impl, (num_frames, _data_transports.size())); + _io_impl = UHD_PIMPL_MAKE(io_impl, (num_recv_frames, send_frame_size, _data_transports.size())); + + //TODO temporary fix for weird power up state, remove when FPGA fixed + { + //send an initial packet to all transports + tx_metadata_t md; md.end_of_burst = true; + this->send( + std::vector<const void *>(_data_transports.size(), NULL), 0, md, + io_type_t::COMPLEX_FLOAT32, device::SEND_MODE_ONE_PACKET, 0 + ); + + //issue a stream command to each motherboard + BOOST_FOREACH(usrp2_mboard_impl::sptr mboard, _mboards){ + (*mboard)[MBOARD_PROP_STREAM_CMD] = stream_cmd_t(stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); + } + + //wait + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + + //flush all transport receive queues (no timeout) + BOOST_FOREACH(zero_copy_if::sptr xport, _data_transports){ + while(xport->get_recv_buff(0).get() != NULL){}; + } + } //create a new pirate thread for each zc if (yarr!!) for (size_t i = 0; i < _data_transports.size(); i++){ @@ -183,23 +298,10 @@ bool usrp2_impl::recv_async_msg( /*********************************************************************** * Send Data **********************************************************************/ -static bool get_send_buffs( - const std::vector<udp_zero_copy::sptr> &trans, - vrt_packet_handler::managed_send_buffs_t &buffs, - double timeout -){ - UHD_ASSERT_THROW(trans.size() == buffs.size()); - bool good = true; - for (size_t i = 0; i < buffs.size(); i++){ - buffs[i] = trans[i]->get_send_buff(timeout); - good = good and (buffs[i].get() != NULL); - } - return good; -} - size_t usrp2_impl::get_max_send_samps_per_packet(void) const{ static const size_t hdr_size = 0 + vrt::max_if_hdr_words32*sizeof(boost::uint32_t) + + vrt_send_header_offset_words32*sizeof(boost::uint32_t) - sizeof(vrt::if_packet_info_t().cid) //no class id ever used ; const size_t bpp = _data_transports.front()->get_send_frame_size() - hdr_size; @@ -218,8 +320,9 @@ size_t usrp2_impl::send( io_type, _tx_otw_type, //input and output types to convert _mboards.front()->get_master_clock_freq(), //master clock tick rate uhd::transport::vrt::if_hdr_pack_be, - boost::bind(&get_send_buffs, _data_transports, _1, timeout), - get_max_send_samps_per_packet() + boost::bind(&usrp2_impl::io_impl::get_send_buffs, _io_impl.get(), _data_transports, _1, timeout), + get_max_send_samps_per_packet(), + vrt_send_header_offset_words32 ); } diff --git a/host/lib/usrp/usrp2/mboard_impl.cpp b/host/lib/usrp/usrp2/mboard_impl.cpp index 4c9f6af73..44f7c1130 100644 --- a/host/lib/usrp/usrp2/mboard_impl.cpp +++ b/host/lib/usrp/usrp2/mboard_impl.cpp @@ -21,6 +21,7 @@ #include <uhd/usrp/dsp_utils.hpp> #include <uhd/usrp/mboard_props.hpp> #include <uhd/utils/assert.hpp> +#include <uhd/utils/byteswap.hpp> #include <uhd/utils/algorithm.hpp> #include <uhd/types/mac_addr.hpp> #include <uhd/types/dict.hpp> @@ -38,11 +39,24 @@ using namespace uhd::usrp; usrp2_mboard_impl::usrp2_mboard_impl( size_t index, transport::udp_simple::sptr ctrl_transport, - size_t recv_frame_size + transport::zero_copy_if::sptr data_transport, + size_t recv_samps_per_packet, + const device_addr_t &flow_control_hints ): _index(index), - _recv_frame_size(recv_frame_size) + _recv_samps_per_packet(recv_samps_per_packet) { + //Send a small data packet so the usrp2 knows the udp source port. + //This setup must happen before further initialization occurs + //or the async update packets will cause ICMP destination unreachable. + transport::managed_send_buffer::sptr send_buff = data_transport->get_send_buff(); + static const boost::uint32_t data[2] = { + uhd::htonx(boost::uint32_t(0 /* don't care seq num */)), + uhd::htonx(boost::uint32_t(USRP2_INVALID_VRT_HEADER)) + }; + std::memcpy(send_buff->cast<void*>(), &data, sizeof(data)); + send_buff->commit(sizeof(data)); + //make a new interface for usrp2 stuff _iface = usrp2_iface::make(ctrl_transport); @@ -69,13 +83,8 @@ usrp2_mboard_impl::usrp2_mboard_impl( _allowed_decim_and_interp_rates.push_back(i); } - //Issue a stop streaming command (in case it was left running). - //Since this command is issued before the networking is setup, - //most if not all junk packets will never make it to the socket. - this->issue_ddc_stream_cmd(stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); - //init the rx control registers - _iface->poke32(U2_REG_RX_CTRL_NSAMPS_PER_PKT, _recv_frame_size); + _iface->poke32(U2_REG_RX_CTRL_NSAMPS_PER_PKT, _recv_samps_per_packet); _iface->poke32(U2_REG_RX_CTRL_NCHANNELS, 1); _iface->poke32(U2_REG_RX_CTRL_CLEAR_OVERRUN, 1); //reset _iface->poke32(U2_REG_RX_CTRL_VRT_HEADER, 0 @@ -94,6 +103,16 @@ usrp2_mboard_impl::usrp2_mboard_impl( _iface->poke32(U2_REG_TX_CTRL_REPORT_SID, 1); //sid 1 (different from rx) _iface->poke32(U2_REG_TX_CTRL_POLICY, U2_FLAG_TX_CTRL_POLICY_NEXT_PACKET); + //setting the cycles per update + const double ups_per_sec = flow_control_hints.cast<double>("ups_per_sec", 100); + const size_t cycles_per_up = size_t(_clock_ctrl->get_master_clock_rate()/ups_per_sec); + _iface->poke32(U2_REG_TX_CTRL_CYCLES_PER_UP, U2_FLAG_TX_CTRL_UP_ENB | cycles_per_up); + + //setting the packets per update + const double ups_per_fifo = flow_control_hints.cast<double>("ups_per_fifo", 8); + const size_t packets_per_up = size_t(usrp2_impl::sram_bytes/ups_per_fifo/data_transport->get_send_frame_size()); + _iface->poke32(U2_REG_TX_CTRL_PACKETS_PER_UP, U2_FLAG_TX_CTRL_UP_ENB | packets_per_up); + //init the ddc init_ddc_config(); @@ -115,7 +134,8 @@ usrp2_mboard_impl::usrp2_mboard_impl( } usrp2_mboard_impl::~usrp2_mboard_impl(void){ - /* NOP */ + _iface->poke32(U2_REG_TX_CTRL_CYCLES_PER_UP, 0); + _iface->poke32(U2_REG_TX_CTRL_PACKETS_PER_UP, 0); } /*********************************************************************** @@ -186,7 +206,7 @@ void usrp2_mboard_impl::handle_overflow(void){ void usrp2_mboard_impl::issue_ddc_stream_cmd(const stream_cmd_t &stream_cmd){ _continuous_streaming = stream_cmd.stream_mode == stream_cmd_t::STREAM_MODE_START_CONTINUOUS; _iface->poke32(U2_REG_RX_CTRL_STREAM_CMD, dsp_type1::calc_stream_cmd_word( - stream_cmd, _recv_frame_size + stream_cmd, _recv_samps_per_packet )); _iface->poke32(U2_REG_RX_CTRL_TIME_SECS, boost::uint32_t(stream_cmd.time_spec.get_full_secs())); _iface->poke32(U2_REG_RX_CTRL_TIME_TICKS, stream_cmd.time_spec.get_tick_count(get_master_clock_freq())); diff --git a/host/lib/usrp/usrp2/usrp2_iface.cpp b/host/lib/usrp/usrp2/usrp2_iface.cpp index 2d450bfc6..55c42567e 100644 --- a/host/lib/usrp/usrp2/usrp2_iface.cpp +++ b/host/lib/usrp/usrp2/usrp2_iface.cpp @@ -30,18 +30,6 @@ using namespace uhd; using namespace uhd::transport; -/*! - * FIXME: large timeout, ethernet pause frames... - * - * Use a large timeout to work-around the fact that - * flow-control may throttle outgoing control packets - * due to its use of ethernet pause frames. - * - * This will be fixed when host-based flow control is implemented, - * along with larger incoming send buffers using the on-board SRAM. - */ -static const size_t CONTROL_TIMEOUT_MS = 3000; //3 seconds - class usrp2_iface_impl : public usrp2_iface{ public: /*********************************************************************** @@ -187,7 +175,7 @@ public: boost::uint8_t usrp2_ctrl_data_in_mem[udp_simple::mtu]; //allocate max bytes for recv const usrp2_ctrl_data_t *ctrl_data_in = reinterpret_cast<const usrp2_ctrl_data_t *>(usrp2_ctrl_data_in_mem); while(true){ - size_t len = _ctrl_transport->recv(boost::asio::buffer(usrp2_ctrl_data_in_mem), CONTROL_TIMEOUT_MS); + size_t len = _ctrl_transport->recv(boost::asio::buffer(usrp2_ctrl_data_in_mem)); if(len >= sizeof(boost::uint32_t) and ntohl(ctrl_data_in->proto_ver) != USRP2_FW_COMPAT_NUM){ throw std::runtime_error(str(boost::format( "Expected protocol compatibility number %d, but got %d:\n" diff --git a/host/lib/usrp/usrp2/usrp2_impl.cpp b/host/lib/usrp/usrp2/usrp2_impl.cpp index a680708ad..afc69f703 100644 --- a/host/lib/usrp/usrp2/usrp2_impl.cpp +++ b/host/lib/usrp/usrp2/usrp2_impl.cpp @@ -17,7 +17,7 @@ #include "usrp2_impl.hpp" #include <uhd/transport/if_addrs.hpp> -#include <uhd/transport/udp_simple.hpp> +#include <uhd/transport/udp_zero_copy.hpp> #include <uhd/usrp/device_props.hpp> #include <uhd/utils/assert.hpp> #include <uhd/utils/static.hpp> @@ -35,9 +35,6 @@ using namespace uhd::usrp; using namespace uhd::transport; namespace asio = boost::asio; -//! wait this long for a control response when discovering devices -static const size_t DISCOVERY_TIMEOUT_MS = 100; - /*********************************************************************** * Helper Functions **********************************************************************/ @@ -99,7 +96,7 @@ static uhd::device_addrs_t usrp2_find(const device_addr_t &hint){ boost::uint8_t usrp2_ctrl_data_in_mem[udp_simple::mtu]; //allocate max bytes for recv const usrp2_ctrl_data_t *ctrl_data_in = reinterpret_cast<const usrp2_ctrl_data_t *>(usrp2_ctrl_data_in_mem); while(true){ - size_t len = udp_transport->recv(asio::buffer(usrp2_ctrl_data_in_mem), DISCOVERY_TIMEOUT_MS); + size_t len = udp_transport->recv(asio::buffer(usrp2_ctrl_data_in_mem)); //std::cout << len << "\n"; if (len > offsetof(usrp2_ctrl_data_t, data)){ //handle the received data @@ -128,7 +125,7 @@ static device::sptr usrp2_make(const device_addr_t &device_addr){ //create a ctrl and data transport for each address std::vector<udp_simple::sptr> ctrl_transports; - std::vector<udp_zero_copy::sptr> data_transports; + std::vector<zero_copy_if::sptr> data_transports; BOOST_FOREACH(const std::string &addr, std::split_string(device_addr["addr"])){ ctrl_transports.push_back(udp_simple::make_connected( @@ -141,7 +138,7 @@ static device::sptr usrp2_make(const device_addr_t &device_addr){ //create the usrp2 implementation guts return device::sptr( - new usrp2_impl(ctrl_transports, data_transports) + new usrp2_impl(ctrl_transports, data_transports, device_addr) ); } @@ -154,7 +151,8 @@ UHD_STATIC_BLOCK(register_usrp2_device){ **********************************************************************/ usrp2_impl::usrp2_impl( std::vector<udp_simple::sptr> ctrl_transports, - std::vector<udp_zero_copy::sptr> data_transports + std::vector<zero_copy_if::sptr> data_transports, + const device_addr_t &flow_control_hints ): _data_transports(data_transports) { @@ -173,7 +171,9 @@ usrp2_impl::usrp2_impl( //create a new mboard handler for each control transport for(size_t i = 0; i < ctrl_transports.size(); i++){ _mboards.push_back(usrp2_mboard_impl::sptr(new usrp2_mboard_impl( - i, ctrl_transports[i], this->get_max_recv_samps_per_packet() + i, ctrl_transports[i], data_transports[i], + this->get_max_recv_samps_per_packet(), + flow_control_hints ))); //use an empty name when there is only one mboard std::string name = (ctrl_transports.size() > 1)? boost::lexical_cast<std::string>(i) : ""; diff --git a/host/lib/usrp/usrp2/usrp2_impl.hpp b/host/lib/usrp/usrp2/usrp2_impl.hpp index a0c252047..62aeddbd3 100644 --- a/host/lib/usrp/usrp2/usrp2_impl.hpp +++ b/host/lib/usrp/usrp2/usrp2_impl.hpp @@ -33,7 +33,7 @@ #include <boost/function.hpp> #include <uhd/transport/vrt_if_packet.hpp> #include <uhd/transport/udp_simple.hpp> //mtu -#include <uhd/transport/udp_zero_copy.hpp> +#include <uhd/transport/zero_copy.hpp> #include <uhd/usrp/dboard_manager.hpp> #include <uhd/usrp/subdev_spec.hpp> @@ -84,7 +84,9 @@ public: usrp2_mboard_impl( size_t index, uhd::transport::udp_simple::sptr, - size_t recv_frame_size + uhd::transport::zero_copy_if::sptr, + size_t recv_samps_per_packet, + const uhd::device_addr_t &flow_control_hints ); ~usrp2_mboard_impl(void); @@ -97,7 +99,7 @@ public: private: size_t _index; int _rev_hi, _rev_lo; - const size_t _recv_frame_size; + const size_t _recv_samps_per_packet; bool _continuous_streaming; //properties for this mboard @@ -174,14 +176,18 @@ private: */ class usrp2_impl : public uhd::device{ public: + static const size_t sram_bytes = size_t(1 << 20); + /*! * Create a new usrp2 impl base. * \param ctrl_transports the udp transports for control * \param data_transports the udp transports for data + * \param flow_control_hints optional flow control params */ usrp2_impl( std::vector<uhd::transport::udp_simple::sptr> ctrl_transports, - std::vector<uhd::transport::udp_zero_copy::sptr> data_transports + std::vector<uhd::transport::zero_copy_if::sptr> data_transports, + const uhd::device_addr_t &flow_control_hints ); ~usrp2_impl(void); @@ -211,7 +217,7 @@ private: uhd::dict<std::string, usrp2_mboard_impl::sptr> _mboard_dict; //io impl methods and members - std::vector<uhd::transport::udp_zero_copy::sptr> _data_transports; + std::vector<uhd::transport::zero_copy_if::sptr> _data_transports; uhd::otw_type_t _rx_otw_type, _tx_otw_type; UHD_PIMPL_DECL(io_impl) _io_impl; void io_init(void); diff --git a/host/lib/usrp/usrp2/usrp2_regs.hpp b/host/lib/usrp/usrp2/usrp2_regs.hpp index 064ad4e95..c3a4d22de 100644 --- a/host/lib/usrp/usrp2/usrp2_regs.hpp +++ b/host/lib/usrp/usrp2/usrp2_regs.hpp @@ -193,9 +193,14 @@ #define U2_REG_TX_CTRL_CLEAR_STATE _SR_ADDR(SR_TX_CTRL + 1) #define U2_REG_TX_CTRL_REPORT_SID _SR_ADDR(SR_TX_CTRL + 2) #define U2_REG_TX_CTRL_POLICY _SR_ADDR(SR_TX_CTRL + 3) +#define U2_REG_TX_CTRL_CYCLES_PER_UP _SR_ADDR(SR_TX_CTRL + 4) +#define U2_REG_TX_CTRL_PACKETS_PER_UP _SR_ADDR(SR_TX_CTRL + 5) #define U2_FLAG_TX_CTRL_POLICY_WAIT (0x1 << 0) #define U2_FLAG_TX_CTRL_POLICY_NEXT_PACKET (0x1 << 1) #define U2_FLAG_TX_CTRL_POLICY_NEXT_BURST (0x1 << 2) +//enable flag for registers: cycles and packets per update packet +#define U2_FLAG_TX_CTRL_UP_ENB (1ul << 31) + #endif /* INCLUDED_USRP2_REGS_HPP */ |