diff options
Diffstat (limited to 'host/lib/usrp/usrp2/usrp2_regs.hpp')
| -rw-r--r-- | host/lib/usrp/usrp2/usrp2_regs.hpp | 26 |
1 files changed, 16 insertions, 10 deletions
diff --git a/host/lib/usrp/usrp2/usrp2_regs.hpp b/host/lib/usrp/usrp2/usrp2_regs.hpp index 10545d712..77d9f4ad9 100644 --- a/host/lib/usrp/usrp2/usrp2_regs.hpp +++ b/host/lib/usrp/usrp2/usrp2_regs.hpp @@ -175,11 +175,12 @@ // // These go to the daughterboard i/o pins // -#define _FR_GPIO_ADDR(off) (0xC800 + (off) * sizeof(boost::uint32_t)) -#define FR_GPIO_IO _FR_GPIO_ADDR(0) // tx data in high 16, rx in low 16 -#define FR_GPIO_DDR _FR_GPIO_ADDR(1) // 32 bits, 1 means output. tx in high 16, rx in low 16 -#define FR_GPIO_TX_SEL _FR_GPIO_ADDR(2) // 16 2-bit fields select which source goes to TX DB -#define FR_GPIO_RX_SEL _FR_GPIO_ADDR(3) // 16 2-bit fields select which source goes to RX DB +#define FR_GPIO_BASE 0xC800 + +#define FR_GPIO_IO FR_GPIO_BASE + 0 // 32 bits, gpio io pins (tx high 16 bits, rx low 16 bits) +#define FR_GPIO_DDR FR_GPIO_BASE + 4 // 32 bits, gpio ddr, 1 means output (tx high 16 bits, rx low 16 bits) +#define FR_GPIO_TX_SEL FR_GPIO_BASE + 8 // 16 2-bit fields select which source goes to TX DB +#define FR_GPIO_RX_SEL FR_GPIO_BASE + 12 // 16 2-bit fields select which source goes to RX DB // each 2-bit sel field is layed out this way #define FRF_GPIO_SEL_SW 0 // if pin is an output, set by software in the io reg @@ -190,10 +191,15 @@ /////////////////////////////////////////////////// // ATR Controller, Slave 11 //////////////////////////////////////////////// -#define _FR_ATR_ADDR(off) (0xE400 + (off) * sizeof(boost::uint32_t)) -#define FR_ATR_IDLE _FR_ATR_ADDR(0) // tx data in high 16, rx in low 16 -#define FR_ATR_TX _FR_ATR_ADDR(1) -#define FR_ATR_RX _FR_ATR_ADDR(2) -#define FR_ATR_FULL _FR_ATR_ADDR(3) +#define FR_ATR_BASE 0xE400 + +#define FR_ATR_IDLE_TXSIDE FR_ATR_BASE + 0 +#define FR_ATR_IDLE_RXSIDE FR_ATR_BASE + 2 +#define FR_ATR_INTX_TXSIDE FR_ATR_BASE + 4 +#define FR_ATR_INTX_RXSIDE FR_ATR_BASE + 6 +#define FR_ATR_INRX_TXSIDE FR_ATR_BASE + 8 +#define FR_ATR_INRX_RXSIDE FR_ATR_BASE + 10 +#define FR_ATR_FULL_TXSIDE FR_ATR_BASE + 12 +#define FR_ATR_FULL_RXSIDE FR_ATR_BASE + 14 #endif /* INCLUDED_USRP2_REGS_HPP */ |